Convertitore di ruggine

Ready to use.
LP-FF-SSF550
[ Convertitore di ruggine ]
LINEA PIÙ
PRIMERS AND TOPCOATS / SYNTHETIC SUBSTRATES SPECIFIC FOR IRON
Transforms rust into an antioxidant.
CYCLE: Before applying the product, remove any
flaking paint or non-anchored rust.
New surfaces must be accurately degreased with
suitable products.
It can be applied with a brush, but the product must
be shaken before use.
Do not pour into metal containers.
Two coats are recommended, the second one at least
30 minutes after the first.
Do not paint over before at least 12 hours after
treating so that it completely dries and no later than
36÷48 hours, making sure that during this period, the
treated part remains sheltered from water.
In normal temperature conditions (22°C) and
relative humidity (60%), the product is dry to the
touch after 15 minutes and can be painted over
after 12÷18 hours.
Do not use at temperatures lower than +5°C.
Keep the product at a temperature no lower than 5°
C out of direct sunlight. The product, stored and
sealed in the original packages, keeps for a period
of 2 (two) years.
The empty jar and washing residue of the used
equipment must be disposed of, according to local
regulations in force.
It does not contain solvents, is applied directly
onto rust and blocks corrosion.
Transforming the rust into an antioxidant
compound makes the substrate weather
resistant and waterproof to moisture.
It prevents rust from forming on rustless
surfaces.
It can be painted over with any type of paint.
It does not need to be diluted and is directly
applied onto the surface to be treated and on
contact with rust it turns a black colour.
WARNINGS: Pour the product a little at a time
into the container used for the application, as any
residual product must not be put back into the
original tin.
Irritant for eyes, respiratory tract and skin. Avoid
contact with eyes and skin. If it should come into
contact with eyes or skin, wash immediately and
thoroughly with water and consult a doctor. Keep
out of the reach of children.
Revision: 2.1
LP-FF-SSF550
[ Convertitore di ruggine ]
LINEA PIÙ
PRIMERS AND TOPCOATS / SYNTHETIC SUBSTRATES SPECIFIC FOR IRON
FORMATS
AVAILABLE
DIMENSIONS
P x L x H (mm)
PZ. X IMB.
LAYERS P.
X LAYER
X PALLET
8012760900553
1000 ml
90x90x220
6
4
90
360
1000 ml