B07 - Wireless Under-Mattress Bedwatcher_UM

Pad Position
Do Not Fold
BedWatcher™ iN-Pad
Wireless Under-Mattress Sensor Pad
Start Date: ____________ / ____________ / ____________
DD
MM
YY
Model: WMBP-11
Product Warranty: 1 Year
CORDLESS SAFEMON
Safer by Design (Patented)
User Manual
B07
Wireless Under-Mattress
BedWatcher™ iN-Pad
Product Description
Rondish iN-Pad is a comfortable and reliable option for non-intrusive bed monitoring.
With our patented under-mattress technology, iN-Pad can detect resident’s presence
on the mattress while functioning unnoticeably under it. Coupled with our Wireless
Fall Alarm Monitor, alarm will be raised when the resident exits from their bed. Wireless
connection can minimalize the use of cables and the related tripping hazards. It can also
be installed in nursing homes and private residential settings easily.
Wireless Fall Alarm Monitor may be connected with two wireless sensor pads. When
used with an additional sensor pad, the system can monitor two patients who reside
in separated beds, or a single patient at two different spots within the range of the
Alarm Monitor.
What’s in the box
Wireless Fall Alarm Monitor CBM-03 (V2)
Wireless iN-Pad WMBP-11
6V AC Adaptor
Caregiver Key CK-01
AA Battery x 3
User Manual B07
1-year Warranty Card
Items Needed
Screwdriver (+/ - Style)
Installation Guide
A. Power Supply
Using AA Battery
1. Remove the protective cover from Wireless Fall Alarm Monitor
2. Open the battery cover with a screwdriver
3. Insert 3 AA batteries
Using AC Adapter
1. Connect the 6V adapter to an electric power socket
2. Plug the power cord into the 6V electric slot on the Alarm Monitor
* Using batteries and AC adapter simultaneously will not cause any damage to the product
B. Setup Wireless Connection
1. Press the "Program" button at the back of the Alarm Monitor until a beep sound can
be heard and the “Pad 1” LED light turns on
2. Switch on the wireless transmitter inside the neck of iN-Pad
*Immediate Alarm:
Flip the switch away from the signal indication light for immediate alarms
*2-Second Alarm Delay:
Flip the switch towards the signal indication light for a 2-second alarm delay
3. When the wireless transmission is successfully turned on, “Pad 1” light on the
monitor will be triggered on with a beep sound, and “Pad 2” light will turn on
4. Press “Reset” button if only one pad will be used. To connect with another wireless
iN-Pad, switch on the second transmitter.
C. Place iN-Pad under the mattress
1. Mark down the start date when you use iN-Pad.
2. Place iN-Pad at hip level on the bed frame
3. Cover iN-Pad with the mattress
D. Test the Alarm
1. Apply pressure on the mattress
2. Release to trigger an alarm
3. To reset the alarm, press "Reset" button or place the magnetic caregiver key near
the red label at lower left corner of the Alarm Monitor
E. Installing Wireless Alarm Monitor
1. Hang the Alarm Monitor on the bed frame or 12 meters (40 feet) within iN-Pad with
the buckle strap attached or nails (drilling required)
How To
Adjust Alarm Volume and Tone
1. Open the battery cover and adjust the alarm volume and tone with the switch
Pause Alarm
1. Press "Reset" button while iN-pad is in use
2. "Monitor Not In Use" light will blink for 3 minutes. During this time, alarm will be
disabled to allow the caregiver to move the resident.
Disable Reset Button
1. Switch to "Reset Button off" on the left side of the Alarm Monitor. The Monitor can
then only be reset by a magnetic caregiver key.
Replace iN-Pad
1. Switch off the wireless transmitter in the neck of iN-Pad. Alarm will be triggered
until a beep alert sounds and “Pad1” LED light turns on.
2. Press "Reset" button, then press "Program" button.
3. Apply Pressure on wireless iN-Pad for 15 seconds until a beep alert sound and
“Pad1” LED light turns on
Maintenance
• To ensure alarm reliability, test the alarm before each use as wireless signal may be
interfered by actual environment
• To ensure proper functionality of iN-Pad, it is recommended to replace the old iN-Pad
after 1 year
• To clean the iN-Pad, 1:100 solution of household bleach shall be used to wipe the
surface. DO NOT put iN-Pad into water or any form of liquid.
• To minimize spreading of diseases, each new resident shall use a new iN-Pad
• When “Pad Lost” light is on and alarm does not work properly, reduce the distance
between the Wireless Fall Alarm Monitor and iN-Pad to reconnect wireless
communication
• When iN-Pad is not in use, keep it dry under room temperature
•DO NOT fold the iN-Pad unless specified as it may damage the product
Troubleshoot
1. Pad Lost Signal
• "Pad 1" or "Pad 2" light should be blinking to indicate the iN-Pad is working correctly
when it is in use. If "Pad Signal Lost" light is blinking, either the pad is out of range, or
wireless transmitter has low battery.
2. Wireless Trasmitter Battery Low
• Red light in wireless transmitter should blink every 15 to 20 seconds. If there is no
light for more than 60 seconds, it indicates a low battery
3. Wireless Alarm Monitor Low Battery
• If you are using battery power, "Low Battery" light indicates there is a need to replace
old batteries
* For any other question, please visit www.rondishcare.com or email to [email protected].
Disclaimer
BedWatcher™ iN-Pad and monitor system is designed to be installed by end-user.
Therefore, it is the entire responsibility of buyer to ensure that the system is properly
installed and tested. Further, the system is not designed to replace good caring
practices including, but not limited to; a) direct resident supervision b) adequate
training for staff personnel for fall prevention and elopement c) testing of the system
before each use.
Where permissible, it is the seller's intent to limit any liability for special, consequential
or incidental economic damages to refund of the purchase price or replacement of
the goods. Seller disclaims any liability for compensatory or other damage arising out
of the use of the goods.
Limited Warranty
Seller warrants that the goods sold will be free from defects of workmanship and
manufacturing, for a period of one year from the date of sale. Other than this limited
warranty, seller makes no express or implied warranties. Except for this limited
warranty, no express or implied warranties are given and no affirmation of seller, by
words or action, will constitute a warranty. The goods being purchased are being sold
on a "with all faults" basis. The entire risk as to the quality and performance of the
goods is with the buyer. Should the good prove defective following their purchase,
the buyer, and not the manufacture, distributor or retailer, assumes the entire cost of
all necessary installation, servicing or repairs.
www.rondishcare.com
[email protected]
www.facebook.com/RondishCare
Manufactured for Rondish Co. Ltd.
Made in China