Winterwarm Wood Fireplace Inserts
Transcription
Winterwarm Wood Fireplace Inserts
FC058_VC_Winterwarm.qxd 4/13/06 16¹⁄₂" (420mm) 16¹⁄₂" (420mm) 21¹⁄₄" 21¹⁄₄" (535mm) (535mm) 6¹⁄₂" 6¹⁄₂" (160mm) (160mm) 13" (330mm) 13" (330mm) 2:49 PM Page 2 Winterwarm Wood Fireplace Inserts 6³⁄₄" 6³⁄₄" (165mm) (165mm) WINTERWARM SMALL INSERT 26" (660mm) 26" (660mm) 25⁵⁄₈" (650mm) 25⁵⁄₈" (650mm) 21¹⁄₄" (535mm) 21¹⁄₄" (535mm) 6¹⁄₂" (160mm) 21¹⁄₄" (535mm) 21¹⁄₄" 21¹⁄₄" (535mm) (535mm) FRONT VIEW 16¹⁄₂" (420mm) SIDE VIEW 13" (330mm) 6³⁄₄" (165mm) TOP VIEW26" (660mm) 25⁵⁄₈" (650mm) 0888 0888 WWsi WWsi specifications specifications 4/01 4/01 21¹⁄₄" (535mm) WINTERWARM LARGE INSERT 0888 WWsi specifications 4/01 FRONT VIEW SIDE VIEW Specifications: Small Model Log Length: 18” Burn Time: 6 - 8 hours Heating Capacity: 500 - 1,000 sq. ft. Maximum Heat Output: 30,000 BTU/hr. 79% Efficiency Rating: EPA Emissions Rating: 2.1 grams/hr. 285 lbs Weight: Minimum Fireplace Dimensions: Height: 21 1/2” Width: 26 1/2” Depth: 15” Flue Collar Size: 6” round Optional Surround Packages: 6” steel covers: 36 1/2” W x 27” H 21¹⁄₄" (535mm) 10” steel cover: 441/2” W x 3” H 7” Cast covers: 40” W x 28 1/2” H 10” Cast covers: 45” W x 31” H Specifications: Large Model Log Length: 24” Burn Time: Up to 9 hours Heating Capacity: 750 - 1,500 sq. ft. Maximum Heat Output: 50,000 BTU/hr. Efficiency Rating: 78.3% EPA Emissions Rating: 2.1 grams/hr. Weight: 475 lbs Minimum Fireplace Dimensions: Height: 24” Width: 34” Depth: 19” Flue Collar Size: 8” oval Optional Surround covers up to 51” W x 36” H WINTERWARM FIREPLACE SYSTEM - Specifications: Fireplace System Model. (Specifications same as WinterWarm Large) Log Length: Burn Time: Heating Capacity: Maximum Heat Output: Clearances of Cabinet: 24” Up to 9 hours 750 - 1,500 sq. ft. 50,000 BTU/hr. To Wall Studs: 1/2” Efficiency Rating: 78.3% EPA Emissions Rating: 2.1 grams/hr. Weight: 840 lbs Chimney 8” High Temperature Cabinet Dimensions: Height: 59 1/2” Width: 39 1/2” Depth: 28 1/2” Visible Front: 41” W x 34 1/2” H YOUR DEALER © 2006 CFM Corporation - All rights reserved. Vermont Castings™ is a registered trademark of CFM Corporation. In the interest of constant product improvements, we reserve the right to change specifications without notice. Before installations, please read Installation Instructions and check all local Building Codes and Gas Regulations. Please see your Dealer or visit www.vermontcastings.com for complete warranty information. FC058 - 1000-9109 Winterwarm Wood Fireplace Inserts FC058_VC_Winterwarm.qxd 4/13/06 2:49 PM Page 4 Winterwarm Fireplace System The WinterWarm System allows you to add the elegance of a fireplace almost anywhere in your home. The system includes everything you need – firebox, large WinterWarm insert, and a zero clearance cabinet. It’s beautiful. Functional. And it’s only by Vermont Castings. Standard Features • High Efficiency - 78% - more heat from less wood • Large fireviewing area with clean, durable, ceramic glass • Easy swing-out ash pan with cover • High heat output - up to 50,000 BTU/hr • Rheostat controlled twin fans for heat circulation • Very low smoke emissions - 2.1 grams/hour • Standard sparkscreen for open fireviewing • Solid, durable cast-iron construction • Long overnight burn times Winterwarm Fireplace System • Solid brass trim around door • Conveniently located controls • Thermostatic control for steady, even heat Options: • Two porcelain enamel color choices: Biscuit and Ebony Black • Outside air kit • Powerful 260 CFM cabinet blower for increased heating power and circulation • Surround panels to compliment a variety of facing materials for a neat, finished appearance Winterwarm Small and Large Inserts The WinterWarm System. E a s y. • Outside air adaptors • Flush front on small models • Rheostat controlled twin fans for heat circulation Perfect. The WinterWarm Fireplace Insert slips easily into your heat-losing fireplace to • Solid, durable cast-iron construction instantly transform it into an efficient heat source. You’ll enjoy all of the beauty of • Long overnight burn times • Conveniently located controls an open fireplace, with all of the convenience and performance of a state-of-theapplications. • Easy ash pan handling • High heat output - up to 50,000 BTUs/hr on large model; 30,000 on small model Efficient. art wood stove. Two sizes are available to suit many different fireplace Options • Large fireviewing area with clean, durable, ceramic glass Winterwarm Wood Fireplace Inserts Winterwarm Large Insert • Two porcelain enamel color choices: Biscuit, Ebony Black, plus Classic Black • High Efficiency - more heat from less wood (79% small, 78.3% large) Standard Features Winterwarm Small Insert • Thermostatic control for steady, even heat • Cast-iron surround panels with small model for a neat finished appearance FC058_VC_Winterwarm.qxd 4/13/06 2:49 PM Page 4 Winterwarm Fireplace System The WinterWarm System allows you to add the elegance of a fireplace almost anywhere in your home. The system includes everything you need – firebox, large WinterWarm insert, and a zero clearance cabinet. It’s beautiful. Functional. And it’s only by Vermont Castings. Standard Features • High Efficiency - 78% - more heat from less wood • Large fireviewing area with clean, durable, ceramic glass • Easy swing-out ash pan with cover • High heat output - up to 50,000 BTU/hr • Rheostat controlled twin fans for heat circulation • Very low smoke emissions - 2.1 grams/hour • Standard sparkscreen for open fireviewing • Solid, durable cast-iron construction • Long overnight burn times Winterwarm Fireplace System • Solid brass trim around door • Conveniently located controls • Thermostatic control for steady, even heat Options: • Two porcelain enamel color choices: Biscuit and Ebony Black • Outside air kit • Powerful 260 CFM cabinet blower for increased heating power and circulation • Surround panels to compliment a variety of facing materials for a neat, finished appearance Winterwarm Small and Large Inserts The WinterWarm System. E a s y. • Outside air adaptors • Flush front on small models • Rheostat controlled twin fans for heat circulation Perfect. The WinterWarm Fireplace Insert slips easily into your heat-losing fireplace to • Solid, durable cast-iron construction instantly transform it into an efficient heat source. You’ll enjoy all of the beauty of • Long overnight burn times • Conveniently located controls an open fireplace, with all of the convenience and performance of a state-of-theapplications. • Easy ash pan handling • High heat output - up to 50,000 BTUs/hr on large model; 30,000 on small model Efficient. art wood stove. Two sizes are available to suit many different fireplace Options • Large fireviewing area with clean, durable, ceramic glass Winterwarm Wood Fireplace Inserts Winterwarm Large Insert • Two porcelain enamel color choices: Biscuit, Ebony Black, plus Classic Black • High Efficiency - more heat from less wood (79% small, 78.3% large) Standard Features Winterwarm Small Insert • Thermostatic control for steady, even heat • Cast-iron surround panels with small model for a neat finished appearance FC058_VC_Winterwarm.qxd 4/13/06 16¹⁄₂" (420mm) 16¹⁄₂" (420mm) 21¹⁄₄" 21¹⁄₄" (535mm) (535mm) 6¹⁄₂" 6¹⁄₂" (160mm) (160mm) 13" (330mm) 13" (330mm) 2:49 PM Page 2 Winterwarm Wood Fireplace Inserts 6³⁄₄" 6³⁄₄" (165mm) (165mm) WINTERWARM SMALL INSERT 26" (660mm) 26" (660mm) 25⁵⁄₈" (650mm) 25⁵⁄₈" (650mm) 21¹⁄₄" (535mm) 21¹⁄₄" (535mm) 6¹⁄₂" (160mm) 21¹⁄₄" (535mm) 21¹⁄₄" 21¹⁄₄" (535mm) (535mm) FRONT VIEW 16¹⁄₂" (420mm) SIDE VIEW 13" (330mm) 6³⁄₄" (165mm) TOP VIEW26" (660mm) 25⁵⁄₈" (650mm) 0888 0888 WWsi WWsi specifications specifications 4/01 4/01 21¹⁄₄" (535mm) WINTERWARM LARGE INSERT 0888 WWsi specifications 4/01 FRONT VIEW SIDE VIEW Specifications: Small Model Log Length: 18” Burn Time: 6 - 8 hours Heating Capacity: 500 - 1,000 sq. ft. Maximum Heat Output: 30,000 BTU/hr. 79% Efficiency Rating: EPA Emissions Rating: 2.1 grams/hr. 285 lbs Weight: Minimum Fireplace Dimensions: Height: 21 1/2” Width: 26 1/2” Depth: 15” Flue Collar Size: 6” round Optional Surround Packages: 6” steel covers: 36 1/2” W x 27” H 21¹⁄₄" (535mm) 10” steel cover: 441/2” W x 3” H 7” Cast covers: 40” W x 28 1/2” H 10” Cast covers: 45” W x 31” H Specifications: Large Model Log Length: 24” Burn Time: Up to 9 hours Heating Capacity: 750 - 1,500 sq. ft. Maximum Heat Output: 50,000 BTU/hr. Efficiency Rating: 78.3% EPA Emissions Rating: 2.1 grams/hr. Weight: 475 lbs Minimum Fireplace Dimensions: Height: 24” Width: 34” Depth: 19” Flue Collar Size: 8” oval Optional Surround covers up to 51” W x 36” H WINTERWARM FIREPLACE SYSTEM - Specifications: Fireplace System Model. (Specifications same as WinterWarm Large) Log Length: Burn Time: Heating Capacity: Maximum Heat Output: Clearances of Cabinet: 24” Up to 9 hours 750 - 1,500 sq. ft. 50,000 BTU/hr. To Wall Studs: 1/2” Efficiency Rating: 78.3% EPA Emissions Rating: 2.1 grams/hr. Weight: 840 lbs Chimney 8” High Temperature Cabinet Dimensions: Height: 59 1/2” Width: 39 1/2” Depth: 28 1/2” Visible Front: 41” W x 34 1/2” H YOUR DEALER © 2006 CFM Corporation - All rights reserved. Vermont Castings™ is a registered trademark of CFM Corporation. In the interest of constant product improvements, we reserve the right to change specifications without notice. Before installations, please read Installation Instructions and check all local Building Codes and Gas Regulations. Please see your Dealer or visit www.vermontcastings.com for complete warranty information. FC058 - 1000-9109 Winterwarm Wood Fireplace Inserts