docIdentification, definition of the approximate age of the straight razor.
download 
Report Transcription
Identification, definition of the approximate age of the straight razor. In this article I would like to highlight some points that may help determine the approximate age of the razor. Obviously, at the very beginning to be mentioned Benjamin Huntsman, a watchmaker from the town of Doncaster (about 20 miles north of Sheffield), England. It was he who in 1740 finally perfected his crucible steel process and realised that this process could be used to make superior tools and cutlery. Since that time, the story goes, and razors, we're talking about. Many 18th-century razors are stamped "Cast Steel" or "Acier Fondu," which dates them later than 1772, as the commercial use of cast steel. These stamps were used till about 1830. "Warranted", 1800-1830. Since 1830s, manufacturers began to put their stamp on blades. Prior to that, there're also stamped with the names of the razor manufacturers, but this wasn't widespread. From the same time manufacturers started making light hollow ground blades. Wedge blade on the left side, light hollow ground blade on the right. The full hollow ground blades have begun to make since 1870s. The table of tails can also help in establishing the age of razors. I think, we must individually mention the frameback: They were made between 1820s-1870s. The most popular they were in the '50s of the 19th century. In determining the age Sheffield razors, should always bear in mind that many manufacturers put the stamp of King / Queen, who was on the throne. King George IV, 1820-1830: King William IV, 1830-1837: Queen Victoria, 1837-1901: But at the end of her reign, the tradition of stamps like "Cutlers to Their Majesties" or "V(crown)R" was lost. An important role in determining the age of razors, knives, and virtually any product of the late 19th century is The Madrid Agreement, and The McKinley Tariff Act. Both documents were signed and entered into force in 1891. The documents are of interest to us, that since 1891, the country of production must be placed by the manufacturer. In practice, it looks like this: Before 1891: After 1891: In 1914, under the Tariff Act, manufacturers must indicate the country of manufacture as a "made in ...", and since 1921, it should be printed in English. For more information about these documents can be found on my website: http://www.strazors.com/index.php?id=325 The use of stainless steel in razors, knives and other cutlery was begun in around 1915. From the newspaper "New York Times", 1915: Stainless steel HESS razor. Sources: "Standard Guide to Razors", Roy Ritchie & Ron Stewart, Website Wikipedia www.wikipedia.org SRP forum www.straightrazorplace.com ©Alex Tseitlin (aka manah) www.strazors.com
Similar documents
Global Razor and Razor Blade Markets in the Top 5 American Countries to 2019 Analysis,Segment,Trends and Forecasts:Acute Market Reports
This industry report package offers the most up-to-date market data on the actual market situation, trends, and future outlook for razors and razor blades in the top 5 American countries. The package includes razor and razor blade country reports from the following countries:
Argentina, Canada, Colombia, Mexico, United States
Browse Full Report with Toc Visit: http://www.acutemarketreports.com/report/razor-and-razor-blade-markets-in-the-top-5-american-countries-to-2019-market-size-trends-and-forecasts
The reports include historic market data from 2008 to 2014 and forecasts until 2019 which makes the reports an invaluable resource for industry executives, marketing, sales and product managers, analysts, and other people looking for key industry data in readily accessible and clearly presented tables and graphs.
Global Razor and Razor Blade Markets in the World to 2019 Size,Share,Growth, Trends and Forecast,By Acute Market
The expansion of the global razor and razor blade industry is forecast to reach 1.3% p.a. in the coming years. Between 2008 and 2014 the market increased with an average annual growth of 4.0%. Currently, razors account for 55.2% of the global demand while the remaining market share is divided between safety razor blades (40.2%) and parts of non-electric razors (4.6%).
China, Germany, Japan, Poland and the United States represent the largest razors and razor blades markets while the strongest annual growth is forecast to occur in Panama (16.9%), Vietnam (10.9%), Iran (8.6%), Moldova (8.1%), and Bolivia (7.3%).
For More Information, Visit: http://www.acutemarketreports.com/report/razor-and-razor-blade-markets-in-the-world-to-2019-market-size-trends-and-forecasts
This industry report package offers the most up-to-date market data on the actual market situation, trends, and future outlook for razors and razor blades in the world. Along with a global razor and razor blade market report the package includes country reports from the following countries:
Argentina, Armenia, Australia, Austria, Azerbaijan, Bangladesh, Belgium, Bolivia, Bulgaria, Canada, Chile, China, Colombia, Czech Republic, Denmark, Ecuador, Egypt, Estonia, Ethiopia, Finland, France, Georgia, Germany, Greece, Hungary, India, Indonesia, Iran, Ireland, Italy, Japan, Jordan, Kazakhstan, Kyrgyzstan, Latvia, Lebanon, Lithuania, Macedonia, Malaysia, Mexico, Moldova, Mongolia, Morocco, Nepal, Netherlands, Norway, Oman, Pakistan, Panama, Peru, Philippines, Poland, Portugal, Romania, Slovakia, Slovenia, South Africa, South Korea, Spain, Sri Lanka, Sudan, Sweden, Thailand, Turkey, Ukraine, United Kingdom, United States, Vietnam
The reports include historic market data from 2008 to 2014 and forecasts until 2019 which makes the reports an invaluable resource for industry executives, marketing, sales and product managers, analysts, and other people looking for key industry data in readily accessible and clearly presented tables and graphs.
Category: Main topic classifications http://www.acutemarketreports.com/category/personal-care-market
The latest market data for this research include:
• Overall razor and razor blade market size, 2008-2019
• Razor and razor blade market size by product segment, 2008-2019
• Growth rates of the overall razor and razor blade market and different product segments, 2008-2019
• Shares of different product segments of the overall razor and razor blade market, 2008, 2014 and 2019
• Market Potential Rates of the overall razor and razor blade market and different product segments
The product segments discussed in the data reports include:
Razors
Safety razor blades
Parts of non-electric razors
The reports help answering the following questions:
• What is the current size of the razor and razor blade market in the world and in different countries?
• How is the razor and razor blade market divided into different product segments?
• How are the overall market and different product segments growing?
• How is the market predicted to develop in the future?
• What is the market potential compared to other countries?
Among the key reasons to purchase include the following:
• Gain an outlook of the historic development, current market situation, trends, and future outlook of the razor and razor blade market in the world to 2019
• Track industry trends and identify market opportunities
• Plan and develop marketing, market-entry, market expansion, and other business strategies by identifying the key market trends and prospects
• Save time and money with the readily accessible key market data included in the report. The market data is clearly presented and can be easily incorporated into presentations, internal reports, etc.
Latest Reports by Acute Market Reports:
All Reports Of This Publisher: http://www.acutemarketreports.com/publisher/global-research-and-data-services
About Acute Market Reports:
Acute Market Reports is the most sufficient collection of market intelligence services online. It is your only source that can fulfill all your market research requirements. We provide online reports from over 100 best publishers and upgrade our collection regularly to offer you direct online access to the world’s most comprehensive and recent database with expert perceptions on worldwide industries, products, establishments and trends. Our database consists of 200,000+ market research reports with detailed & minute market research.
Contact Us:
Chris Paul
Sales Manager
Office No 101, 1st Floor,
Aditi Mall, Baner,
Pune, MH, 411045
India
Toll Free(US/CANADA): +1-855-455-8662
India: +91 7755981103
Email: [email protected]
Web: http://www.acutemarketreports.com/
