Brochure SFBM.indd - Werkhuizen Hengelhoef Industrial Contracting
Transcription
Brochure SFBM.indd - Werkhuizen Hengelhoef Industrial Contracting
STEEL FIBER BLOWING MACHINE Werkhuizen Hengelhoef Industrial Contracting Hengelhoefstraat 162 - 3600 GENK - BELGIUM T. +32 89 32 22 77 F. +32 89 36 25 49 www.werkhuizen-hengelhoef.be [email protected] Brochure SFBM.indd 1 3/06/13 18:23 STEEL FIBER BLOWING MACHINE Werkhuizen Hengelhoef started to develop and produce steel fiber blowing machines more than 20 years ago and they have an excellent reputation for performance and reliability. These machines are now employed throughout the world and are responsible for adding hundreds of tonnes of steel fibers into concrete on a daily basis. Technical & Mechanical characteristics Build on a mobile trailer unit Load capacity: 2700 kg 4.70 meters large by 1.8 meters wide by 3.3 meters high Lombardini or Hatz diesel engine With or without sound protection, depending on required specifications. The level of the machine can be easily adjusted by means of the three hydraulic supports 2 in front of the machine and 1 at the side of the command panel. Large plates are mounted onto the supports to provide support on different terrains. Steel fibers are placed into the stainless steel loading tray which is then tilted hydraulically to allow fibers to be discharged into the fiber separator unit. (Optimum packaging for steel fibers is 25 to 50kg bags/ boxes) Once separated the fibers are blown at high velocity into concrete via an adjustable transport tube. Brochure SFBM.indd 2 3/06/13 18:23 The fan and separator unit are hydraulically driven. The tilt tray upper filling tube and the 3 supports are adjusted by means of hydraulic cylinders. All cylinders are equipped with pressure driven valves. The hydraulic system is balanced so that none of the movements interfere with the overall machine operation. The hydraulic reservoir has sufficient capacity to avoid heating during intensive use. The gasoil reservoir has a capacity of 50 litres which gives an operating period of 8 hours at full power. All hydraulic commands are mounted on the central command panel which is situated on the rear of the machine, close to the loading tray. The loading tray, separator unit, transport tube and battery housing are all manufactured from stainless steel. The hydraulic reservoir, fan and supports are manufactured from coated steel and the trailer decking from aluminium. Our fiber blowing machines can also be supplied with concrete admixture dosing equipment which facilitates accurate dispensing of admixtures directly into the concrete mixer. For the movie visit www.werkhuizen-hengelhoef.be or http://www.youtube.com/watch?v=SxO-Db4gs44 (youtube) Brochure SFBM.indd 3 3/06/13 18:23 Hengelhoefstraat 162 - 3600 GENK - BELGIUM T. +32 89 32 22 77 F. +32 89 36 25 49 Brochure SFBM.indd 4 www.werkhuizen-hengelhoef.be [email protected] 3/06/13 18:23