Operations Manual for Skill Development Initiative Scheme (SDIS

Transcription

Operations Manual for Skill Development Initiative Scheme (SDIS
Operations Manual
for
Skill Development Initiative Scheme (SDIS)
Based on Modular Employable Skills
Government of India
Ministry of Labour and Employment
Directorate General of Employment and Training
December 2014
1
Disclaimer:
All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopy, recording or any information
storage and retrieval system, without permission in writing from the Directorate General
of Employment & Training, M/o Labour & Employment, New Delhi.
In case of conflict between the guidelines and Operational Manual, the latest guidelines
issued by DGE&T will prevail.
2
Message by DG/JS (MoLE)
India has one of the youngest populations in the world where as most industries
in India are currently struggling with scarcity of skilled labor. Government of India has
formulated the National Skill Development Policy and has set a target of training 50
crore youth by 2022 to reap the demographic dividend. Ministry of Labour &
Employment undertook development of a new strategic framework for skill development
to provide employable skills and also test and certify the existing skills of the persons
and launched Skill Development Initiative Scheme (SDIS) in May 2007.
The Operational Manual for Implementation of Skill Development Initiative
Scheme (SDIS) has been developed in view of the need for having a single document
which presents all the processes, roles and responsibilities for all stakeholders involved
in implementation of SDIS. The manual has been developed by taking into view all the
amendments to the guidelines which have been released till date and will be updated
periodically to act as a one stop reference for all the stakeholders of SDIS.
It is important that uniform standard operating procedures are followed
countrywide for ensuring quality and uniformity in service delivery, by reducing any
ambiguity which might arise during the implementation. The operational manual focuses
on the processes for Vocational Training Providers (VTP), Assessing Bodies (AB) and
the government functionaries like State directorates, Regional Directorate of
Apprenticeship Training (RDAT) and DGE&T.
It is envisaged that all the functionaries working under SDIS will utilize the
manual to provide quality services aimed at providing vocational training and meaningful
employment to the youth in the country. I hope that the Operational Manual will help all
concerned to operationalize the processes and strengthen the implementation of one of
the most critical skill development programs in the country.
(V. Alok Kumar IAS)
Director General/ Joint Secretary
Ministry of Labour & Employment
3
Contents
1
Table of Annexure................................................................................................................................. 7
2
Abbreviations ........................................................................................................................................ 7
3
Definitions applicable to SDIS ............................................................................................................... 8
4
Background ........................................................................................................................................... 9
4.1
Vocational Training System in India.............................................................................................. 9
4.2
Vocational training under Directorate General of Employment & Training (DGE&T)................10
4.3
Institutional Training – Craftsmen Training through Industrial Training Institute (ITI) .............. 10
4.4
On the Job Training – Apprenticeship Training through Industry............................................... 11
4.5
Skill Development Initiative on Modular Employable Skill (MES)...............................................11
4.6
Advisory Body – National Council of Vocational Training (NCVT) & Central Apprenticeship
Council11
5
6
Introduction to Skill Development Initiative Scheme (SDIS)............................................................... 12
5.1
Progress of Skill Development Initiative Scheme (SDIS) ............................................................. 12
5.2
Objectives of the Scheme ...........................................................................................................13
5.3
Key Features of the Scheme .......................................................................................................13
5.4
Target Group............................................................................................................................... 14
5.5
Instructional Media Packages ..................................................................................................... 14
Implementation Structure ..................................................................................................................14
6.1
Apex Committee for SDI/ MES....................................................................................................14
6.1.1
Composition of Apex Committee........................................................................................14
6.1.2
Functions of Apex Committee............................................................................................. 15
6.2
National Project Management Cell (NPMC) Regional Cells (RDAT)............................................16
6.3
Functions of National Project Management Cell (NPMC) .......................................................... 16
6.3.1
7
Functions of the Regional Directorate of Apprenticeship Training (RDAT) ........................ 16
6.4
State Society/Committee............................................................................................................ 18
6.5
Functions of State Society........................................................................................................... 22
6.6
Grievance redressal committee.................................................................................................. 22
Training under the Scheme................................................................................................................. 23
7.1
Vocational Training Providers (VTPs).......................................................................................... 23
7.2
Steps in registration of VTP:........................................................................................................24
7.3
Registration Procedure ...............................................................................................................24
4
8
7.3.1
Application .......................................................................................................................... 24
7.3.2
Evaluation of Application: ................................................................................................... 28
7.3.3
Signing of contract: ............................................................................................................. 29
7.3.4
Suspension / Cancellation of Registration: .........................................................................30
7.3.5
Other Conditions................................................................................................................. 31
7.3.6
Quality Assurance for VTPs ................................................................................................. 31
7.4
Registration of Candidates.......................................................................................................... 32
7.5
Course Structure ......................................................................................................................... 34
7.6
Training calendar creation: ......................................................................................................... 35
7.7
Training .......................................................................................................................................36
7.8
Assessment ................................................................................................................................. 37
7.9
Placement ................................................................................................................................... 37
7.10
Post placement tracking of trained youth .................................................................................. 38
7.11
Reimbursement of Training cost................................................................................................. 38
Assessment and Certification.............................................................................................................. 41
8.1
Assessing Bodies .........................................................................................................................42
8.2
Objectives and Main Features of Assessment & Certification under the SDI Scheme ...............42
8.3
Overview of Assessments ...........................................................................................................43
8.3.1
Questioning Techniques......................................................................................................43
8.3.2
Theory Test ......................................................................................................................... 43
8.3.3
Practical Test. ......................................................................................................................43
8.3.4
Assessment Parameters...................................................................................................... 44
8.3.5
Duration of Test: ................................................................................................................. 45
8.4
Selection Process: ....................................................................................................................... 45
8.4.1
Submission of application for empanelment:..................................................................... 45
8.4.2
Criteria for Assessing Body.................................................................................................. 46
8.4.3
Criteria for assessor ............................................................................................................46
8.4.4
Competency evaluation of assessors..................................................................................47
8.4.5
Award of Empanelment ...................................................................................................... 47
8.4.6
Registration of assessing body in portal .............................................................................48
8.4.7
Inclusion of new assessors:................................................................................................. 48
8.5
Suspension/De-paneling of Assessing body/ Assessor ............................................................... 49
5
8.6
Quality Systems and Process requirements: .............................................................................. 49
8.7
Pre- Assessment.......................................................................................................................... 50
8.7.1
In case of Direct Assessment: ............................................................................................. 51
8.7.2
Preparation of assessment tools and prerequisites: ..........................................................52
8.7.3
Pre-assessment activities for Assessor at the Testing Centre............................................. 53
8.8
Assessment activities .................................................................................................................. 54
8.9
Post-assessment activities ..........................................................................................................55
8.9.1
Consolidation and reporting of results by assessor............................................................ 55
8.9.2
Uploading outcome of the assessment and photos in portal by assessing body ...............55
8.9.3
Maintaining assessment records ........................................................................................56
8.10
Publishing of results and Certificate issue .................................................................................. 56
8.11
Assessment fee and Claim generation........................................................................................ 56
9
Monitoring & Evaluation of the performance of the VTP...................................................................58
9.1
Web based software for implementation, monitoring and evaluation......................................58
9.2
Tracer studies.............................................................................................................................. 59
9.3
Mid–term review of the scheme ................................................................................................ 59
9.4
Third Party Monitoring of Program Implementation ................................................................. 59
10
Expectations from other Stakeholders ........................................................................................... 60
10.1
Employers & employees organizations:......................................................................................60
10.2
International Organizations: ....................................................................................................... 60
10.3
State Governments: .................................................................................................................... 61
10.4
NGOs/ Vocational Training providers: ........................................................................................ 61
11
Scheme outlay................................................................................................................................. 61
1.
Definitions and interpretations: ......................................................................................................... 64
2.
Roles and Responsibilities:.................................................................................................................. 67
3.
Deliverables......................................................................................................................................... 69
4.
Definitions and interpretations: ......................................................................................................... 76
5.
ROLES AND RESPONSIBILITIES: ........................................................................................................... 79
6.
DELIVERABLES .....................................................................................................................................80
6
1 Table of Annexure
S. No
Name of Annexure
Page Number
1
Contract agreement between State Directorate and VTP
63
2
Contract agreement between DGE&T and Assessing Body
75
3
Attendance Sheet
90
4
Pre-assessment checklist
91
5
Result sheet
92
6
Details of Assessors
93
7
Hostel Norms
94
2 Abbreviations
AB
Assessing Body
ATI
Advanced Training Institute
CSS
Centrally Sponsored Scheme
CTI
Central Training Institute
CTS
Craftsmen Training Scheme
DCA
Direct Candidate Assessment
DGE&T
Directorate General of Employment & Training
FTI
Foremen Training Institute
GFR
General Financial Rules
GOI
Government of India
IFD
Integrated Finance Division of MoLE
IMP
Instructional Media Package
ITC
Industrial Training Centre
ITI
Industrial Training Institute
L&E
Labour and Employment
M&E
Monitoring and Evaluation
7
MES
Modular Employable Skills program of the Government of India
MIS
Management Information System
MoLE
Ministry of Labour & Employment
MoF
Ministry of Finance
NCVT
National Council for Vocational Training
NIMI
National Instructional Media Institute at Chennai
NPMC
National Project Management Cell
NSDA
National Skill Development Agency
NVTI
National Vocational Training Institute for Women
RDAT
Regional Directorate of Apprenticeship Training
RVTI
Regional Vocational Training Institute for Women
SCVT
State Council for Vocational Training
TC
Testing Centre
UC
Utilization Certificate
UT
Union Territory
VTP
Vocational Training Provider
3 Definitions applicable to SDIS
Sector - Sector is a conglomeration of different business operations having similar
businesses and interests. It may also be defined as a distinct subset of the
economy whose components share similar characteristics and interests.
Skills – means the ability to apply knowledge and use know-how to complete tasks
and solve problems.
Competency – means the proven ability to use acquired, knowledge, skill,
personal and social abilities, in discharge of responsibility roles. It is the ability to
do a job well.
Knowledge – means the outcome of the assimilation of information through
learning. Knowledge is the body of facts, principles, theories and practices that is
8
related to a field of work or study. Knowledge is described as theoretical and/or
factual.
Candidate – refers to an individual undergoing skill development training or is
looking for recognition of the skills acquired formally/informally.
Trainer – means someone who trains, instructs, teaches or otherwise enables the
candidate(s) to acquire the appropriate knowledge and skills
Vocational Training Provider - means any organization providing knowledge and
skills to candidates.
Recognition of Prior Learning or RPL – is the process of recognizing previous
learning, often experiential, towards gaining a qualification
Assessing Body – means any organization which is empanelled by DGE&T to
carry out assessment of trained candidates or direct candidates under SDIS
4 Background
4.1 Vocational Training System in India
Vocational Training is a concurrent subject under the Constitution. The Central
and State Governments share responsibility for effective implementation of
vocational training system in the country.
As per the National Skill Development Policy, India has target of creating 500
million skilled workers by 2022 and all the ministries have devised skill
development plans and set the targets/milestones for skill development and
employment.
Directorate General of Employment and Training (DGE&T), Ministry of Labour &
Employment (MoLE), is the nodal body for formulating policies, laying down
norms, standards, conducting trade test and certification of vocational training
under the aegis of training advisory body National Council of Vocational Training
(NCVT).
9
4.2 Vocational training under Directorate General of Employment &
Training (DGE&T)
The Directorate General of Employment & Training (DGE&T) in Ministry of Labour
is the apex organization for development and coordination at National level for the
programs relating to vocational training including Women’s Vocational Training
and Employment Services. The vocational training system under the Ministry of
Labour and Employment is one of the most comprehensive systems in the
country.
Industrial Training Institutes are under the administrative and financial control of
State Governments or Union Territory Administrations. DGE&T also operates
Vocational Training Schemes in some of the specialized areas through field
institutes under its direct control. Development of these programs at national level,
particularly in the area concerning common policies, common standards and
procedures, training of instructors and trade testing are the responsibility of the
DGE&T. Some of the vocational training schemes are briefed below:
4.3 Institutional Training – Craftsmen Training through Industrial Training
Institute (ITI)
The craftsman training is provided to youth with the objective to prepare semiskilled workers for the industry. The educational qualification varies from class VIII
pass to Class XII pass depending upon the trades. The duration of training varies
from six months to three years. The trainees after completion of craftsmen training
appear in the All India Trade Test to get National Trade Certificate awarded by
National Council of Vocational Training (NCVT), which is recognized for the
purpose of recruitment to the subordinate technical posts at the shop floor level
within the country as well as abroad. The State Governments through Industrial
Training Institutes/Industrial Training Centers (ITIs/ITCs) impart institutionalized
vocational training under Craftsman Training Scheme, which is one of the flagship
programs run by the DGE&T.
10
4.4 On the Job Training – Apprenticeship Training through Industry
Another important training scheme of DGE&T is apprenticeship training imparted
under the Apprentices Act, 1961 in industrial establishments to school leavers and
ITI graduates with the objective to prepare skilled workers for the industry. The
educational qualification varies from class VIII pass to Class XII pass depending
upon the trades. The duration of training varies from one year to four years. All
India Trade Tests for apprentices are conducted under the aegis of NCVT.
Successful apprentices are awarded National Apprenticeship Certificate, which is
a recognized qualification for recruitment to the shop floor level subordinate
technical posts within the country as well as abroad.
4.5 Skill Development Initiative on Modular Employable Skill (MES)
Skill Development Initiative on Modular Employable Skill (MES) has been
developed in close consultancy with Industry, State Governments & Experts in
pursuance of excellence in vocational training. MES is ‘Minimum Skill Set’ which
is sufficient to get an employment in the world of work. MES allows skills
upgradation/formation, multi entry and exist, vertical and horizontal mobility and
lifelong learning opportunities in a flexible manner and allows recognition of prior
learning. The skill is to be assessed by the Assessing Body mainly from the
Industry organizations. NCVT issues certificate of skills acquired through informal
means/competence assessed.
4.6 Advisory Body – National Council of Vocational Training (NCVT) &
Central Apprenticeship Council
Two tripartite bodies—the Central Apprenticeship Council (a statutory body) and
the National Council for Vocational Training (a non-statutory body) - advise the
GOI on formulating policies and procedures, and prescribing standards and norms
for vocational training schemes. Correspondingly, State Councils advise the State
governments in respect of vocational training at the State level. The National
Council for Vocational Training develops syllabi, affiliates ITIs, and conducts All
India Trade Tests (AITT) and issue certificates.
11
5 Introduction to Skill Development Initiative Scheme (SDIS)
Hon’ble Minister of Finance during the budget speech in 2005-06 made the
following announcement:
“To meet the demand for specific skills of a high order, a Public Private Partnership
between Government and Industry is proposed to promote skills development
program under the name ‘Skill Development Initiative’….”
Accordingly, Ministry of Labour & Employment undertook development of a new
strategic framework for skill development for early school leavers and existing
workers, especially in the un-organized sector in close consultation with industry,
micro enterprises in the un-organized sector, State Governments, experts and
academia which were essential considering their educational, social and economic
background.
5.1 Progress of Skill Development Initiative Scheme (SDIS)
Ministry of Labour and Employment launched Skill Development Initiative Scheme
(SDIS) in May 2007. DGE&T at the national level issues the guidelines and
provides funding and direction to the scheme whereas the implementation is
carried out by the state government and regional institutions under Ministry of
Labour and Employment in partnership with VTP and Assessing Bodies.
The online implementation of the SDI scheme through web-portal was launched
since 1st January 2012. During XI plan period (2007-12), against an approved
outlay of Rs 500 crore, an amount of Rs 407 crore was spent and 13.67 lakh
persons were trained or directly tested under the scheme.
Till date 27.31 lakh of youth have been training / tested under SDIS. At present
SDIS is being implemented by 9807 Vocational Training Providers and 104
Assessing Bodies.
Cabinet committee on Skill Development has approved the continuation of this
scheme for XII plan period with certain changes. An outlay of Rs 2000 crore has
12
been kept for the scheme for 12th plan period. Total, 25 lakh people would be
skilled & certified during 12th plan period.
5.2 Objectives of the Scheme
i.
To provide vocational training to the people by optimally utilizing the
infrastructure available in Govt., private institutions and industry. Existing
skills of the persons can also be tested and certified under this scheme.
ii.
To build capacity in the area of development of competency standards,
course curricula, learning material and assessment standards in the
country.
5.3 Key Features of the Scheme
Key features of the scheme are:
i.
Demand driven short term training courses based on Modular Employable
Skills (MES) identified and decided in consultation with Industry. MES is the
‘Minimum Skills Set’ which is sufficient for gainful employment or self
employment in the world of work.
ii.
Central government facilitates, funds and promotes training while industry,
private sector and state governments provide training to the persons
iii.
Optimum utilization of available existing infrastructure to make training cost
effective.
iv.
Flexible delivery mechanism (part time, weekends, full time, and onsite) to
suit needs of various target groups.
v.
Testing of skills of an individual acquired informally in competency and issue
of NCVT certification on qualifying it successfully.
vi.
Testing of skills of trainees by independent assessing bodies which do not
involve in training delivery, to ensure an impartial assessment by the
employer itself.
vii.
Essence of the scheme is in the certification on vocational training from the
NCVT that is nationally and internationally recognized in world of work in the
Government (Center and State) as well as private sector.
13
5.4 Target Group
MES benefits different target groups like:
 Persons seeking certification of their skills acquired informally
 Persons seeking skill upgradation
5.5 Instructional Media Packages
In order to maintain quality of training uniformly all over the country, instructional
media packages (IMPs) are being developed by the National Instructional Media
Institute (NIMI), Chennai. List of
IMPs have been developed so far is given at the website: www.dget.gov.in/nimi.
6 Implementation Structure
Apex Committee at national level was constituted for effective coordination with all
stakeholders like Sector Mentor Councils, Industry, other ministries, State
Governments and Trade Unions to advise and guide the project implementation.
National Project Management Cell (NPMC) in DGE&T Headquarters and six
regional cells in RDATs and State societies were set up for implementation as well
as monitoring of the activities of SDI/ MES Scheme in the country.
The Apex Committee is chaired by the Secretary, Labour & Employment, Govt. of
India and has representatives of major stakeholders. The composition and functions
of these Committees are mentioned below.
6.1 Apex Committee for SDI/ MES
The Directorate General of Employment & Training (DGE&T) has constituted an
Apex Committee at national level. The composition and functions of the Apex
Committee are given below:6.1.1 Composition of Apex Committee
1. Secretary (L&E)
-
Chairman
2. Financial Advisor (MoLE)
14
3. Joint Secretary / Director General & Employment & Training
4. Director General, Resettlement, Ministry of Defense
5. Secretaries of concerned departments of following states.
a. Andhra Pradesh
b. Orissa
c. Arunachal Pradesh / Nagaland
6. Director General, National Skill Development Agency
7. The representatives of Employers
a. Tata Motors Limited
b. Toyota Kirloskar Motor Private Limited
8. The representatives of Employees
a. Bhartiya Mazdoor Sangh (BMS)
b. Indian National Trade Union Congress (INTUC)
9. Deputy Director General (AT)
10. Director (SDI) – Member Secretary
6.1.2 Functions of Apex Committee
1. Review and revise the policies, norms, criteria, funds allocation, expenditure,
costs, procedures, etc. of the scheme.
2. Review & revise training fee and assessment fee.
3. Prepare guidelines for selecting and appointing assessing bodies.
4. Decide the rate of honorarium, TA/DA etc to be paid to the members of
Trade Committees and others.
5. Prepare guidelines for awarding the work of developing Web based software;
6. Monitor and evaluate the scheme.
7. Prepare the guidelines for selecting the vocational training providers.
8. Ensure proper utilization of funds released.
9. Assess labour market demand.
10. Make changes, additions or deletions of components under the scheme
11. Can revise rate of reimbursement of training cost and the procedure for
release of funds.
15
6.2 National Project Management Cell (NPMC) Regional Cells (RDAT)
National Project Management Cell (NPMC) in DGE&T Headquarters and six
regional cells in RDATs were set up for implementation as well as monitoring of
the activities of SDI/ MES Scheme in the country. The NPMC and regional cells
are under the administrative control of Directorate General of Employment and
Training in the Ministry of Labour & Employment, which is the coordinating
agency.
Each Regional Cell at RDAT has one Project Coordinator (SDI) of the level of
Joint Director assisted by one Assistant Project Coordinator (SDI) responsible for
implementing the scheme in the respective region.
6.3 Functions of National Project Management Cell (NPMC)
1. National
Project
Management
Cell
(NPMC)
prepares
guidelines
in
consultation with all stakeholders for implementation of SDIS all over the
country.
2. Coordinates with the software service provider and other support service
organizations and agencies for effective implementation of the scheme and
for providing quality services to all the stakeholders of the program.
3. Allot the funds for the state directorates as per the Annual Action Plan and the
potential of the state to carry out vocational training.
4. Receive the reports and complaints from the regional and state cells and take
appropriate action.
5. Periodic inspections of the training and assessments conducted by VTP and
Assessing Body respectively.
6. Monitoring of the scheme through the MIS reports and the reports furnished
by the RDAT and state cells.
7. Convene review meetings with stakeholders on periodic basis
6.3.1 Functions of the Regional Directorate of Apprenticeship Training (RDAT)
1. RDAT shall maintain a roster of ABs sector-wise and state-wise and assign
them to VTPs in order of conclusion of their training programmes, so that the
same Assessing Body does not assess the same VTP again and again.
16
2. Allotment of Assessing Bodies shall be done strictly as per roster maintained
at RDAT for Assessing Bodies.
3. Issuance of Assessment Batch Number (ABN) and allotment of Assessing
Body shall be done within 05 days from the issue of Training Batch Number
(TBN) and ensure that Assessing Body enter assessment schedule into the
portal within 05 days from the date of issue of ABN.
4. To ensure that Assessing Body conduct assessment within 3 days of
completion of training.
5. Reject the ABN allotted on the following occasions:
a. In case batch is old and VTP is not able to mobilize candidates
b. In case of duplication of batch.
6. Authorize to modify the assessment schedule on the request of Assessing
Body on genuine reasons.
7. Assessing Body shall upload the outcome of assessment within 07 days from
the date of assessment. Continuous inordinate delay may lose their
empanelment.
8. Result shall be declared within 5 days of uploading of assessment by the
Assessing Bodies. Copies of the result sheets should be dispatched within 2
days of declaration of result.
9. MES Certificates shall be printed and dispatched to concern within 05 days of
declaration of result.
10. To ensure inspection of 2% of the batches during training in VTPs and 3%
during assessment every month by the officials. Inspection reports shall be
sent to DGE&T by first week of every month.
11. To have close interaction with the States/UTs for reducing pendency relating
to applications for registration of VTPs, issuing TBNs, reimbursement of
training cost and assessment fee to VTPs and Assessing Bodies respectively.
Report in this regard shall be sent to DGE&T, New Delhi in the first week of
every month.
17
12. RDATs will closely monitor the assessment carried out by the ABs and also
provide necessary guidance to the ABs for maintaining proper documentation
of record in this regard.
6.4 State Society/Committee
 Each State Government/UT administration has set up SDI cell in the
Directorate to coordinate with VTPs located in their State/UT, assessing
bodies and RDAT / DGE&T and implement the SDI scheme.
 The states having population more than 4 crore, engage atleast 4 persons
and others atleast 2 persons at the state level exclusively for SDIS.
State/UT shall also perform the following activities:o Registration of VTPs.
o Re-imbursement of training cost to VTP within 30 days of receipt of
bills and supporting documents.
o Re-imbursement of assessment fee to ABs within 30 days of receipt
of bills and supporting documents.
o Issuance of fund utilization certificate to DGE&T
 State/UT has formed Society having separate bank account where all
transaction concerning implementation of SDI scheme is being made.
 States/UTs are allowed to use up to 4% of the annual expenditure as
administrative costs under SDIS subject to maximum of Rs.25 lakh per
annum.
The expenditure on items like publicity for mobilization of
candidates, deployment of personnel for timely inspection of VTPs
premises, engagement of people at State and district level for inspection
and monitoring, etc. are admissible as administrative expenditure.
 State/UT shall develop systems to publish district-wise courses being
offered by various VTPs in local newspaper and book expenditure under
administrative expenditure.
 States and UTs can reject the applications of potential VTPs for registration
as VTPs at the stage of acknowledgement subject to the conditions that
enough
number
of
VTPs
exist
in
their
States
for
particular
18
modules/districts, under a transparent policy prominently displayed to
public.
 States and UTs are encouraged to adopt better monitoring, tracking and
payment systems linked to outcomes for which approval on case to case
basis would be accorded on receipt of clear proposal.
 Grants in Aid released to the State/UT should be utilized exclusively for the
purpose for which it has been sanctioned conforming to the provisions of
the GFR.
 States/UTs shall issue TBN or reject request for issue of TBN within seven
days from the date of enrollment/registration of candidates by a VTP on the
portal failing which the TBNs would be generated without waiting for any
more clearance from the State.
 Maximum number of batches a registered VTP can run on a day, modulewise shall be prescribed by the State directorate as given below:
o For all existing VTPs, States/UTs shall carry out an exercise and fix
maximum number of batches a VTP can run in a day, module-wise.
o For applications to be decided, States/UTs would fix the maximum
number of batches a VTP can run in a day, module-wise, while
approving registration.
 States will be given freedom to devise modalities to track the graduating
candidates for at least six months to a year. The expenses of the same
may be charged under administrative expenses allowed under the scheme.
 States and UTs will ensure that at least 30% of the trainees trained under
the Scheme are female
 Funds from DGE&T for implementation of SDIS will be transferred to the
respective States/UTs treasury as Grant-in-aid. Accordingly State/UT
governments may make suitable budget provisions in the budget of StateUT governments corresponding to the release to be made by the Union
Government for SDI scheme in the current fiscal. The State Society can
access the funds from the State treasury as per the processes defined by
19
the respective State/UT. State Society shall make the payments towards
reimbursements.
 The payment towards all reimbursement claims shall be settled within 30
days from the date of receipt of bills. If there are any discrepancies in the
bills submitted by the VTPs and ABs, the Society shall return the said bills
within 10 days from the receipt of bills.
 States are allowed to utilize the forfeited amount of 20% payment of
training cost, related to reimbursement to the VTPs which will be made
after placement details are entered into the portal for at least 80% of the
candidates passing out for every batch, to incentivize well performing
VTPs.
 States may devise modalities to track the graduating candidates for at least
six months to a year. A process could be designed such as IVRS tracking
etc. for this purpose in collaboration with third parties, similar to the tracking
of mid-day meal scheme being undertaken by the Government of Uttar
Pradesh. The expenses of the same may be charged under administrative
expenses allowed under the scheme.
 The possibility of involvement of functionaries of District administration for
inspection of VTPs during training and assessment shall be explored. If
required, some funds for meeting administrative expenses for this purpose
may be given to the collector as well.
 State directorates shall prescribe a system by clear written order for VTPs
to submit variety of documents like proof of date of birth, educational
qualification, etc.
 State directorates shall reduce the pendency with respect to application for
registration as VTP, payment of training cost and assessment fee by
streamlining the processes and consider not asking unnecessary and
avoidable documents and put up a time frame internally to clear the
applications and claims.
 State/UT will appropriately incorporate conditions about usage of generator
sets in the contract agreement entered into with such VTPs.
20
 States and UTs will earmark 20% of the funds for FY 2014-15 and 30%
from financial year 01-04-2015, for providing training to the workers of
unorganized & organized sector on various courses in different sectors
approved under SDI scheme keeping in view local industry need through
urban ITIs. Features of the sub-scheme are given below:
(i)
ITIs for this sub-scheme should be located in the urban/ semi- urban
center within 5-10 Kms of periphery of Municipal Corporation/ Municipal
Council.
(ii)
Training courses are to be conducted in second shift after 3.00 PM/
4.00PM. Time of training will be flexible.
(iii)
Courses covered under SDI scheme will be allowed. New courses on
need basis can also be included under SDI scheme. DGET shall
separately notify the admissible courses for this sub-scheme giving due
consideration to recommendations of the states, if any.
(iv) Trainee should be a person of age more than 17 years.
(v)
Training cost and Assessment cost will be borne under SDI scheme.
(vi) Building and Other Construction Workers (BOCW) Welfare Board will
assist identified ITI financially for setting up additional infrastructure for
courses relating to construction. Construction would also include
various infrastructure areas. ITI will send the proposal fulfilling the
norms set by NCVT to BOCW Welfare Board for seeking funds.
 Basic training under the Apprentices Act. 1961 can be conducted in the
registered VTPs and the training cost will be reimbursed to VTPs in respect
of apprentices engaged by MSMEs in the courses approved by NCVT.
Basic training modules will be notified by DGET under SDI scheme from
time to time which might require arrangement of training in phases/weekwise appropriate to efficient apprenticeship training. States shall give
priority to such training modules as apprentices have much higher
employability than other skill programme.
21
6.5 Functions of State Society
1. Assess labour market demand.
2. Give wide publicity to the scheme.
3. Invite applications from VTPs, scrutinize the same.
4. Ensure the implementation of prescribed training fee in the VTPs.
5. Prepare annual training plan for the State and send the same to DGE&T at
least three months before start of the financial year.
6. Ensure the implementation of reservation policy for SC/ST, women and
others in respect of training places in VTPs.
7. Provide support to the assessing bodies in conducting tests.
8. Monitor and evaluate the outcome of the scheme. State/district officials
would be expected to inspect at least 5% of the batches during training and
assessment
9. Prepare guidelines for inspecting VTPs.
10. Ensure proper utilization of funds released to the VTPs.
11. Shall monitor the progress made by it is with regards to the minimum number
of candidates trained under SDIS.
12. Shall inspect the hotels of VTPs as per the norms prescribed.
13. Make payments to VTP and AB on timely basis on the completion of
prescribed activities and submission of bills and supporting documents as
prescribed by DGE&T.
6.6 Grievance redressal committee
 As a part of institutional mechanism to speed up the escalation and
effectively monitor the working of scheme, the following two Committees
are being set up:
i.
Regional level
Regional Director, RDAT
Nominee of DGE&T
Nominee of State Directors
Representative of Employees
22
Representative of Employers
ii.
National level
Director General of Employment & Training
Deputy Director General (AT)
Representative of NSDA
Representative of Employees
Representative of Employers.
Director (SDI), DGE&T
 Regional Committee will go through the grievances received from various
stakeholders and will resolve them. In case, grievances are not resolved by
the Regional Committee, the same will be submitted to National Level
Committee for redressal. Regional Level Committees will meet quarterly
and will send their reports to National Level Committee.
Reports of
monitoring agencies will be submitted to Regional Committees and
National Level Committee for their perusal and resolution.
7 Training under the Scheme
7.1 Vocational Training Providers (VTPs)
The training under SDI scheme is provided by various Vocational Training
Providers (VTPs) registered under Central Government, State Governments,
Public and Private Sector and Industrial establishments/Institutes etc. VTPs
provide counseling & vocational guidance, training facilities as per norms, impart
quality training, post training support to trainees in getting employment.
VTPs optimally utilize the training infrastructure available. VTP tracks the trainees
for a period of 1 year from end of training till they get gainfully employed and are
continuing in the job. VTPs are required to have close networking with the industry
for immediate placement of the trainees. VTPs follow various instructions issued
by the committees or any other authority from time to time.
23
VTPs are reimbursed training cost at the rate prescribed by DGE&T which is
revised on a yearly basis. All registered VTPs shall have a broad band internet
connection.
VTPs are registered by the respective States/UTs in the sectors/courses for which
training infrastructure is available with it, by making an application to State
Directors dealing with vocational training if it qualifies the registration procedure.
7.2 Steps in registration of VTP:
The registration of the application of the entity for becoming VTP under SDI
scheme shall follow the following steps.
 Receipt of fully filled online application from the entity applying for registering
as VTP under SDI
 Online Acknowledgement to the entity from the state directorate of receipt of
the online application.
 Physical inspection by inspecting officer to inspect training infrastructure and
amenities (space, power norms and tools & equipment etc.) and submission
of report online for consideration of Director/Commissioner.
 Scrutiny
of
the
application
and
related
Director/Commissioner after consideration of
documents
by
the
the recommendation of
inspecting officer.
 Rejection of application of the entity in case of any deficiencies in the
application or as a result of the physical inspection.
 Remedy of the deficiencies by the entity and reapplication online
 Intimation to the applicant for signing of contract and issue of registration
number.
7.3 Registration Procedure
7.3.1 Application
States will float RFQ once in a year for inviting applications from training
providers for registration as VTP and applications of those training providers
24
who have applied in response to RFQ will be considered for registration as
VTPs. DGE&T will send copy of RFQ to States.
The provision of floating of RFQ for inviting application from training providers
for registration as VTP would not be applicable for new training providers in
which candidates are deputed by Government of North Eastern States including
Sikkim, LWE area, J&K, Andaman Nicobar, Lakshadweep, Himachal Pradesh
and Uttarakhand.
The application for registration of VTP is available online in the SDI portal. An
entity may fill the online application and submit the same to State Directorate for
verification, inspection and approval. The entity applying for registration as VTP
under the scheme is not required to submit hard copy of the application,
performance bank guarantee and application fee.
The entity should provide proof related to power connection and upload scanned
copy of the latest electricity bill while filling the online application on the portal.
No other document like proof of land or building ownership, rent agreement, bye
laws of society, etc. would be required.
An entity which has applied for VTP registration and has taken the infrastructure
on rent may upload a copy of rent agreement/deed along with the copy of the
electricity bill issued in the name of the landlord/ building owner. Both the
documents shall be uploaded as a single scanned file.
VTPs who want to run training courses through generator sets in those areas
where power supply is not regular can also avail the benefits of SDI scheme to
train candidates in their areas. Copy of electricity bill would not be required
during registration, with following conditions:i.
Hourly meter should be installed in order to know how many hours’
generators have run.
25
ii.
Log book may be maintained indicating the time of operation and fuel
purchase details. Copies of the log book will be submitted along with
reimbursement claim.
iii.
Official of nearby Govt. ITI may inspect the premises of VTP once in 15
days to see whether VTP is running generator set.
iv.
In case the generator set is taken on rent, monthly rent receipts shall be
enclosed along with reimbursement claims.
v.
In case the generator set is purchased, the receipt of the same is enclosed
at the time of submitting of application for registration or if it is hired than
copy of the contract /agreement should be uploaded on the portal.
All applications pending for registration from before 11-9-2013 may be decided
on the basis of previously prescribed documents even if copy of electricity bill is
not submitted by the applicant. Also, the decision on such applications may be
taken without insisting on submission of documents prescribed earlier provided
a copy of the latest electricity bill is submitted by such applicant.
The applications can be submitted any time round the year to the respective
State Directorate online after release of RFQ.
Organizations having more than one training centre shall submit separate
application forms for each centre.
Physical inspection before registration is not required for Institutions which are
running at present and are affiliated with or recognized by regulatory bodies like
NCVT, AICTE, MCI, NCI, Architecture Council, Pharmacy Council, etc, or
institutions run or significantly controlled by the Central Government Ministries.
VTPs located outside North Eastern States including Sikkim, Left Wing
Extremist (LWE) affected districts, Jammu & Kashmir, Special Category States,
Andaman and Nicobar and Lakshadweep Islands and willing to train candidates
from these areas would thus now be free to get registered with more than one
State and different registration numbers would be allotted to such a VTP for
registration with different States. VTPs registered with more than one State
26
would be expected to run batches in such a way that no batch has trainees from
more than one State.

Organizations/ Training Providers, having presence in four or more States,
trained more than 2000 persons in last two years in SDI scheme and 60% of the
trained persons having been placed, will be empanelled at National Level by a
Committee having representations from DGET, State Governments and Trade
Unions and chaired by DG/JS, DGE&T. Training Centres of empanelled
agencies will not be required to be further inspected by the State Governments
for registration as VTP. Further, the Committee will scrutinize performance of
such empanelled organizations on an annual basis and will take steps for deempanelment, if quality is found to be declining.

Organizations which enter into Flexi MoUs in accordance with guidelines
of DGET and assure 80% employment of candidates in a batch will be allowed
the following dispensation:
i.
to conduct training for 8 hours a day
ii.
batch size of maximum candidates 180 numbers at a time fulfilling
norms of instructors, tools and equipment as prescribed in NCVT approved
courses.
The dispensation would be discontinued if 80% placement level is not
achieved.

It will also be allowed to run Mobile VTP or set up of training infrastructure
on temporary basis in rural areas under SDI scheme subject to the fulfilling
prescribed conditions and such entity is required to apply on line for registration
of VTP. Mobile VTP is such that tools and equipment for the modules may be
installed in the vehicle which will go from places to places to provide training to
the beneficiaries. States/UTs may allow to run Mobile VTP or setting up of
training infrastructure on temporary basis in rural areas subject to the following
conditions:
i.
Organisation will provide permanent address while applying for registration of its
27
training center as VTP. Organization has to inform its option for running the
courses at the time of applying. Options are namely: training through Mobile Van
or setting up of temporary training infrastructure.
ii. VTP will be allowed to run only courses which are popular in rural areas.
iii. VTP will be allowed to run courses namely: either through Mobile Van or setting
up of temporary training infrastructure only in the district where it is registered.
iv. Permissible courses will be notified by DGET in consultation with States taking
into technical feasibility of installing the training equipment on mobile van.
v.
Before starting courses, VTP will have to inform the State authorities and
Principal/Head of Govt. ITI about the location for running the courses.
vi. VTP will be allowed to run only those courses for which registration has been
provided and only at one location at a time.
It has been decided to run a pilot with maximum of 200 Centres and based on
the outcomes of the pilot, further action will be taken for extending the scope.
Therefore, state authority concerned with implementation of SDI shall take
prior approval of DGET, if they intend to permit more than five such VTPs.
7.3.2 Evaluation of Application:
The states are expected to upload the details of various inspecting officials
district-wise and sector-wise on portal. Sufficient number of officials for
inspection of VTP’s premises may be selected for every district and sector. After
such a facility is created and details of inspecting officials are uploaded in SDI
portal, the IT system on receipt of online application for registration of VTP
would pick up an official for inspection of the VTP’s premise from the pool. This
official after due inspection would be expected to submit his/her report only
through portal to allow Director/Commissioner in charge of the department
handling SDIS to approve or reject an application for registration as VTP. State
may decide amount of payment to be made to such inspecting officials for this
task and book expenditure on the same under administrative expenses allowed
under the Scheme.
28
The deficiencies if any, in the application shall be communicated to the
applicant. The applicant shall furnish all such information/ documents / proofs
sought for the purpose of evaluation.
State Directorate will inform the applicant, the decision about the approval/
rejection of the application. The state Directorate will register the VTP and issue
registration letter.
The applicants shall bear all costs for submission of information / documents as
desired by State Directorate.
The applicant whose application is rejected by State Directorate on due
evaluation can apply after making up the deficiencies indicated by the State
Directorate.
7.3.3 Signing of contract:
Based on the evaluation of the application, contract agreement provided in
Annexure 1 will be signed between State Directorate and the VTP. The State/UT
will issue 7 digits code as a registration number. State/UT will grant registration
to new VTP only after VTP signs a contract of agreement with them.
The registration for VTPs will be valid for 3 years after which the registration has
to be renewed to ensure that machinery and equipment and other training
infrastructure are in working condition the period of registration of VTP.
In case of already registered VTPs, such VTPs have to sign contract of
agreement with their respective States/UTs by 31-10-2014 failing which such
VTPs would be de-registered.
VTPs who are already registered with the State Directorates for 3 years shall
also be inspected with one year from 1-05-2014 and the registration shall be
renewed with new contract agreement.
State/UT shall make a complete review of existing VTPs for consolidation of
VTPs to ensure that quality VTP remain in the system by end of June, 2014.
29
7.3.4 Suspension / Cancellation of Registration:
 If a registered VTP (other than an ITI) does not conduct any training within
3 months of registration (in case of new registration) or within 6 months of
finishing the training of the last batch, the registration of such VTP would
be cancelled. This provision would be applied from 1st July, 2014.
 If VTP has enrolled the same candidate in more than one batches running
at same point of time, the registration of such VTP shall be cancelled
immediately.
 If VTP do not get their candidates assessed within seven days of
completion of training for 3 out of last 5 batches, VTP would not be
allowed to conduct further training in that module.
 In case more than 40% of candidates appearing in assessment fail in 3
out of last 5 batches in a module, such a VTP would not be allowed to
conduct further training in that module.
 If 10 or more candidates out of batch size of 20 enrolled at the time of
issue of TBN drop out at the time of assessment for 3 out of last 5
batches, such module of VTP will be deregistered. This provision will be
applicable for those batches which would start from 1-06-2014.
 Training Batch Number (TBN) would not be issued to such VTP who does
not enter on portal data regarding placement with respect to 80% of
candidate for 6 month period for more than three batches. Details of
candidates in self-employment and not employed shall also be tracked.
This would be made applicable for batches which finish training after
facility for such entry is made available on the portal.
 If a registered VTP is not able to ensure wage employment at a minimum
salary of minimum wage for semi-skilled worker for that state for even
50% candidates within 3 months of training and for a period of atleast six
months for 3 out of last 5 batches, such VTPs would be de-registered.
This would be made applicable for batches starting training after facility
for entering data regarding tracking of candidates is made functional for
the batches starting from 1-06-2014.
30
 DGE&T, RDAT, concerned State/ UT Government department or any
agency authorized by them may carry out random visits round the year
any time for verifying the status of the institution and to ensure
maintenance of norms and standards.
 DGE&T, RDAT, concerned State/ UT Government department or any
agency authorized by it may also conduct from time to time inspections
with or without notifying such dates in cases where specific complaints of
misrepresentation, violation of norms and standards, malpractices etc.
are received to verify the facts. Upon inspection, such complaints, if
found correct would be reported to the concerned State to cancel /
suspend the registration of VTP.
7.3.5 Other Conditions
 If at any stage it is found that VTP is running the courses without necessary
training infrastructure, its registration may be cancelled / suspended.
 The VTP will not open any franchise.
 The VTP shall fully comply with instructions issued by DGE&T for usage of
the SDIS portal. VTP shall provide necessary IT infrastructure and
manpower for the same.
 The VTPs would be eligible to run only those MES courses for which it has
been registered.
 The VTP shall submit the schedule of courses it intends to run.
 VTP cannot discontinue any course(s) without written approval of the State
Government.
 VTPs shall conduct modules specifically preferred by female candidates
during regular working hours of the institute or during day time on weekly off
days and to the extent possible not during evening hours.
7.3.6 Quality Assurance for VTPs
Separation of training delivery and assessment functions are aimed at ensuring
better quality. Performance of the VTPs is closely monitored based on the
outputs and outcomes of training provided by them.
31
7.4 Registration of Candidates
Registration procedure for trainees in recognized VTPs is given below:
i.
The minimum age limit for persons to take part in the scheme is 14 years but
there is no upper age limit. In case a candidate is not able to produce
document to support that he/she has minimum educational qualification,
concerned VTP should assess the reading, writing and comprehension level
of such a candidate by conducting a test before enrollment. This document
should be maintained by VTP for verification during assessment.
ii.
The minimum number of candidates for issue of TBN has been fixed as 10
per batch TBN shall therefore not to be issued by the State/UT if candidates
enrolled in a batch are less than 10.
iii.
The batch size for Manufacturing sector is 20 and 30 for agriculture , allied
and service sectors. But, if some VTPs want to have larger batches they may
apply to competent authority with full justification. The request to be decided
after inspection to ensure availability of necessary training infrastructure.
iv.
Persons will get themselves registered in approved Vocational Training
Providers. VTP will not admit any trainee once the course is started.
v.
VTPs may also circulate publicity materials such as pamphlets, brochures
etc. in order to create awareness about the courses, facilities from the MES
funds.
vi.
The Candidates will be selected based on the minimum qualifying criteria of
Age and Education. In case, where there are limited seats available with the
VTP, the admission of the eligible candidates would be done on the basis of
merit. Seats would be filled up as per the Reservation Policy applicable in
the State in which the VTP is located.
vii.
Same candidate should not be enrolled in 2 batches running at the same
time by a VTP.
viii.
Candidate’s photo should be uploaded along with the demographic and
educational details during online registration. Hard copies of documents like
proof of date of birth, educational qualifications, etc should be collected by
the VTP and kept in the training center. The scanned copy of documents
32
should be shared to state DET through CD or e-mail as prescribed by the
state. VTP should show the hard copies of these documents to the Assessor
when he/she visits the center for assessment.
ix.
A candidate can do higher level of module only when he/she has passed the
corresponding lower level modules.
x.
The candidates who have passed the various exams conducted by NCVT,
SCVT, recognized Universities, Boards, etc. would be allowed to take higher
level courses if they have taken training in that sector and have successfully
passed such a course.
xi.
Candidates doing CTS course can undergo training under SDI Scheme.
Under no circumstances, however, a candidate undergoing CTS would be
permitted to undergo training in module of having contents already covered
under CTS.
xii.
As per the ‘MES Curricula approved by NCVT (as on 31.03.10)’, exemption
will be given to the candidates who have passed the National Trade
Certificate (NTC) under Craftsman Training Scheme (CTS), National
Apprenticeship Certificate (NAC) and Diploma/ Degree in Engineering from
appearing in relevant level-I MES course with minimum educational
qualification and the candidates who possess minimum educational
qualification with minimum 3 years experience in relevant trade shall be
allowed directly to appear in the advanced level-II MES course examination.
xiii.
In order to provide skill training to orphans under SDI scheme, provision is
being made in SDI portal namely: orphan in the form of candidate’s
registration and under this field filling the name of father/mother will be kept
optional and NGO is required to fill details namely: Name of the NGO, head
of the NGO and its address. VTP should take orphans only from orphanage
/NGOs registered with concerned authorities
xiv.
VTP shall not enroll candidates who are undergoing courses of engineering,
diploma and CTS in their centres under SDI scheme in similar modules. In
case students intend to undergo training under SDI scheme, they will not be
allowed to undergo training at other VTP also.
33
xv.
A failed candidate for reassessment under SDI scheme may appear for
maximum of four times as direct testing candidate and he will have to pay
assessment fee each time as per the prescribed rates to the Assessing
Body.
7.5 Course Structure
VTPs impart training to students for the courses approved by DGE&T under the
SDIS as per the approved curricula. The VTP will structure the course schedule
as per the composition of the student requirements and availability of resources at
its premises. The duration of the courses is as given in List of MES Curricula
approved by NCVT.
VTP shall conduct minimum of three hours and maximum of six hours of training
in a module daily. However, for residential courses, minimum & maximum hours
of training per day would be six hours and eight hours respectively. Further, VTP
would follow such holidays as observed by the State wherein VTP is established.
To improve employability of the candidates and reduce repetitive and avoidable
assessments, combo and integrated modules would be introduced under the
Scheme. To clearly indicate likely higher employability level of trainees doing such
modules, these would bear number higher than 500.
Minimum hours of Module under SDI scheme should not be less than 300 hours.
Content of entrepreneur skill etc. will be included in Soft Skill module and soft skill
module will be made mandatory.
VTPs can conduct training on soft and entrepreneurship skill of 100 hours along
with hard core skills module having duration more 300 hours simultaneously. The
assessment of trainees will be carried out on completion of both modules.
In case the State/UT wants to introduce/include an integrated/combo module
under the scheme, the proposal for the same may be sent to DGE&T for approval.
MES courses are being rationalized by Sector Mentor Councils to make the
courses aligned to the demand of the industry and to make the trainees
34
employable.
Sector Mentor Councils were
formed in
25 sectors
with
representatives from industry and academic/ professional institutions.
VTP conducting engineering, diploma and CTS courses in their centres shall
impart training for MES modules under SDI scheme after regular working hours
only.
VTP shall not run similar courses to the MES modules allotted to them in its
premises while being a part of SDIS and running batches under the scheme.
7.6 Training calendar creation:
 VTP should submit training calendar indicating the likely start date and end dates
batch wise / module wise to State DET for approval well in advance.
 The minimum number of candidates for issue of TBN should be 10 per batch.
The batch size for Manufacturing sector is 20 and 30 for agriculture, allied and
service sectors. But, if some VTPs want to have larger batches they may apply to
competent authority with full justification. The request to be decided after
inspection to ensure availability of necessary training infrastructure.
 The actual state date and end date of the training should be entered in the portal
by the VTP.
 Portal will generate the Training Batch Number (TBN) automatically after basic
details of the trainees are uploaded by the VTP/TC. Until this system is in place,
the training batch number will be generated by the State directorate after going
through the various documents related to trainees, etc.
 State directorates on the basis of schedules uploaded by VTPs would be
expected to carry out publicity about modules being started by various VTPs in a
district through issue of advertisement in local newspapers to help mobilization of
candidates.
States may meet the cost related to such publicity from
administrative expenditure now being allowed under the scheme.
35
 All ITIs whether public or private having upto four units would be required to train
at least 20 candidates every year under SDI and 40 candidates every year in
case they have more than four units.
 VTPs can enroll 30% more candidates at the time of starting of courses. No
admission will be allowed in the middle of the courses.
7.7 Training
 The registered VTP shall impart training as per the course contents prescribed in
the module and give sufficient hands on training to the candidates
 VTP shall conduct minimum of 3 hours and maximum of 6 hours of training in a
module daily. However, for residential courses, minimum & maximum hours of
training per day would be 6 hours and 8 hours respectively. Holidays as
observed in the state where VTP is operational shall be observed.
 States/UTs shall issue TBN or reject request for issue of TBN within 7 days from
the date of enrollment/registration of candidates by a VTP on the portal failing
which the TBNs would be generated without waiting for any more clearance from
the state.
 A system of capturing bio-metric attendance should be in place is capture the
attendance of the students twice a day and transfer to the central server by
October 2014. The details regarding specification etc. of these devices are being
prescribed separately. The candidates who have more than 80% attendance on
bio-metric system only would be assessed once the system is put in place. VTPs
would not be allowed to conduct training under SDIS after 1st October 2014, if
they fail to install the prescribed devices and ensure their integration with the
portal.
 VTP should ensure the regular availability of the instructors during the training
period. Every trainer would be expected to remain present at least 90% of the
days for every batch and in case the attendance of trainer is found less than 90%
level, the reimbursement of the VTP will be reduced 10% of every shortfall up to
36
next 5%. Once the biometric attendance system is in place, trainer’s attendance
would also be captured on the bio-metric device
7.8 Assessment
The VTP shall forward the batch for assessment to RDAT by selecting the names
of the candidates who may appear for assessment. RDAT in turn will allot the
batches directly to the assessor of an Assessing Body for scheduling the
assessment. Once the assessment is confirmed and scheduled by the assessing
body, the VTP shall ensure that the students are informed about the date, time
and venue of assessment and shall ensure that the infrastructure, tools and
equipments required for assessment are kept ready for carrying out assessment
in the training center.
VTP shall extend all the support to the assessor for carrying out the assessment.
Information like application form, answer sheets of written test for eligibility,
attendance records of students and trainers, etc shall be made available to the
assessor as and when sought.
Assessment related process are detailed under Section Testing and Assessment.
7.9 Placement
VTP shall ensure wage employment to at least 50% passed trainees of a batch at
a minimum salary of minimum wage for semi-skilled worker for that state within 3
months of end of training and for a period of at least six months. This would be
made applicable for batches starting training after facility for entering data
regarding tracking of candidates is made functional for the batches starting from
1-06-2014.
Incentive of Rs 3000 per placed trainee will be paid to VTP if atleast 70% trainees
of a batch are provided wage employment for minimum salary of Rs 6000 per
month within 3 months of training and for period of atleast 6 months.
VTPs which assure atleast 70% placement would be entitled to get advance upto
40% of amount due against submission of bank guarantee of amount atleast
37
equal or more than the advance sought. Advance against Bank guarantee shall
be given limited to maximum of 40% of the amount due for their batch which shall
be calculated inclusive of expenditure on boarding and lodging.
7.10 Post placement tracking of trained youth
 VTPs would be required to track the passed out candidates to monitor the
placements reported by the VTPs to ascertain the genuineness of claims, quality
of VTPs, and also to track the graduating candidates to a year to appreciate the
long term value addition by the VTPs. and shall track the candidates for a
maximum of 12 months from the completion of training. VTP shall enter details
like status of placement, salaries/incomes in the portal.
 Tracking of candidates will be done centrally at the State Directorate level, so
that appropriate information is available about the performance of the VTPs
7.11 Reimbursement of Training cost
VTPs after training and assessment shall submit bills for payment/reimbursement
of training costs to the concerned State directorate. No VTP shall collect the
training fee from any trainee. Training fee if collected from the trainees of batches
started before 11-9-2013 shall be refunded to the candidates immediately.
Pooling of funds and resources available from various Schemes including
Corporate Social Responsibility funds, Building and Other Construction Workers
Cess, trainees’ own contribution, etc. would be allowed in case a VTP proposes to
conduct such a course which has cost higher than the payment level approved
under the Scheme.
The payment/reimbursement with respect to batches comprising of trainees from
difficult areas and outside their state would be made by the State from where the
trainees in that batch have come for training.
The training fee which includes cost of material, honorarium, etc. has been
prescribed as follows:
38
i.
The SDI Scheme has the provision of reimbursement of Training cost to the
Vocational Training Providers. The module list and type of module is available
at http://dget.nic.in/mes/annex4.pdf
ii.
The amount for reimbursement has been fixed as given below:
a. Rs.27.50 per hour per trainee appearing for assessment after the
training for modules/ sector in Section A in the module list as given in
the link above.
b. Rs.22.50 per hour per trainee appearing for assessment after the
training for modules/ sectors Section B in the module list as given in
the link above..
c. 10% additional expenditure per hour per trainee appearing for
assessment after the training, for modules run in North Eastern States
including Sikkim, Left Wing Extremist (LWE) affected districts, Jammu
& Kashmir, Special Category States of Himachal Pradesh &
Uttarakhand, Andaman and Nicobar Islands and Lakshadweep
d. The training cost would further be increased by Rs.2.50 per hour per
trainee at the beginning of every financial year. This increase of cost
at the beginning of Financial Year would be applicable on batches
starting after 1st April of the corresponding financial year.
iii.
20% of the payment of training related to reimbursement to the VTPs shall be
made only after data on tracking of trained youth is entered into the portal for
at least 80% of the trainees passing out for every batch. This provision will be
applicable for those batches which would start from 1-06-2014.
iv.
An incentive at the rate of Rs.3000 per placed trainee would be payable to
such VTPs which are able to ensure wage employment as defined earlier to
at least 70% trainees of a batch at a minimum salary of Rs.6000 per month
within three months of training and for a period of at least six months.
v.
Expenditure at the rate of Rs.300 per day per trainee on boarding and lodging
and up to Rs.5000 per trainee for to and fro transportation for trainees living in
North Eastern States including Sikkim, Left Wing Extremist (LWE) affected
districts, Jammu & Kashmir, Special Category States of Himachal Pradesh &
39
Uttarakhand, Andaman and Nicobar Islands and Lakshadweep and undergo
training outside these areas would be admissible. The norms for hostel are
provided in Annexure – 9.
vi.
85% of the Boarding and Lodging fee will be reimbursed to the VTP on
monthly basis based on the submission of bills. The remaining 15% of the
Boarding and Lodging fee will be paid to VTP after the completion of
assessment of the candidate and submission of bills.
vii.
VTPs which assure at least 70% placement for the trained candidates would
be entitled to get advance up to 40% of the amount due against submission of
bank guarantee of amount at least equal or more than the advance sought.
viii.
The VTP is eligible for training cost reimbursement only after its students
have successfully undergone assessment by the Assessing Body. After
declaration of Result and issue of certificate by respective RDAT, VTP shall
submit the Bill for re-imbursement of Training Fee to respective State/UT.
State/UT will make payment.
ix.
In case of delay on the part of VTPs to offer candidates for assessment to
Assessing Bodies beyond three days of completion of training, the reductions
as indicated below would be imposed:
a. If candidates are offered for assessment from 4th day of completion of
training and till 10th day, 15% deduction in the training cost.
b. If candidates are offered for assessment from 11th day of completion
of training and till 20th day, 30% deduction in the training cost.
c. If candidates are offered for assessment beyond 20th day of
completion of training, 45% deduction in the training cost.
x.
Payments shall be made through NEFT/RTGS only as soon as integration of
payment gateway with the portal takes place.
xi.
VTP shall submit the reimbursement claim related to training cost within 30
days of declaration of result, failing which, claim would not be entertained by
the State.
40
xii.
Well performing VTPs which provide placement to more candidates than the
prescribed minimum limit will be incentivized subject to the availability of
funds under SDI scheme on following criteria:
a. Rs. 2000 per trainee to such VTP which are able to ensure placement
to atleast 60%to 70% passed out trainees of a batch at a minimum
salary equivalent to minimum wage for semi-skilled worker applicable
in the State.
b. Rs. 1000 per trainee to such VTP which are able to ensure placement
to atleast 50% to 60% passed out trainees of a batch at a minimum
salary equivalent to minimum wage for semi-skilled worker applicable
in the State
The forfeited amount of 20% of training cost related to reimbursement made
after placement data is entered for at least 80% of the trainees passing out for
every batch will be used to give above incentive.
8 Assessment and Certification
The assessment process under SDI Scheme aims to test and certify the
competency of the persons through Assessing Bodies who seek certification of
their skills acquired informally or the persons who have been trained at the
registered VTPs. The Assessing Bodies are empanelled by DGE&T.
The main objective of assessment and certification is to measure the competency
of the trained youth to perform the tasks required in the work environment by
gathering evidence of performance and evaluate against agreed criteria. The
process for assessing the skills should be valid, authentic, current, and reliable
with proper documentation to remove any subjectivity or ambiguity in the
assessment.
41
8.1 Assessing Bodies
DGE&T appoints Assessing Bodies to assess the competencies of the trained
persons. The Assessing Body is an independent agency, which will not be
involved in conducting the training programs
Keeping in view the target of providing training/testing of one million persons
throughout the country and to avoid monopoly, more than one assessing bodies
are appointed for a sector or an area. The assessing bodies also assist DGE&T to
develop qualifications and standards for assessment through research and
interaction with industry, trainers and academia.
In the assessment process of SDIS, identification of competency, ways to
measure the competency and deciding on the type of evidence that has to be
collected are the responsibility of the Assessing bodies where as administering
the assessment and collecting the evidence and reporting the results are the
responsibility of the assessors.
The competency assessment of the candidate is being done by independent
Assessing Bodies (AB) which are not involved in training delivery, to ensure an
impartial assessment.
8.2 Objectives and Main Features of Assessment & Certification under the
SDI Scheme
The main objectives of testing and certification under the SDI Scheme are:
 Testing & Certification of formally / informally acquired skills of one million
persons every year.
 Testing & Certification by independent Assessing Bodies who are not
involved in training delivery in order to ensure neutrality.
 Certification being recognized by national and international governments,
private, industries and trade organizations.
42
8.3 Overview of Assessments
8.3.1 Questioning Techniques
 Questions must be clear and have only one interpretation.
 Questions must be easy to use and require minimum time to answer.
 As far as possible equal time should be given to all questions having same
score.
 Question having same time and same score should have same degree of
difficulty.
 Assessment should spread over the entire syllabus.
8.3.2 Theory Test
 It must assess the knowledge which is essential for a person to do the job
. Without this knowledge, the person cannot be able to do the job.
 The questions shall be normally of objective type involving selection of
correct response rather than writing sentences.
 The question paper should contain sketches/ diagrams/ photographs/
drawing to overcome the problems of reading comprehension.
 The test shall be of short duration.
8.3.3 Practical Test.
To test
 Manipulative skills to handle tools and equipment.
 Speed in doing work.
 Accuracy maintained
 Quality in workmanship.
43
 Sequence of performance.
 Economical use of material.
 Neatness & housekeeping.
 All the competencies prescribed in the course curriculum.
8.3.4 Assessment Parameters
(i)
Knowledge
 Of equipment.
 Of limitation of use of tools and equipment.
 Of methods & procedure.
(ii)
Understanding.
 Of functioning of equipment & tool.
 Criteria to be used in selecting tools for given job.
 The process of measurement.
(iii)
(iv)
Skill
 Precision
- Finishing to required measurement.
 Computing
- Handling measurement & calculations.
 Manual
- Handling tools and equipment with ease.
 Finishing
- Neat finishing.
Abilities
 To take corrective steps.
 To use correct work habits.
44
 To take measurements
 To complete the job within stipulated time.
 To adopt safe practices.
(v)
Attitude.
 Towards the work
 Regarding appreciation for accurate & precise work.
 Towards co-workers and supervisor.
8.3.5 Duration of Test:
The duration of test will vary according to the task. Theory test shall of 1 hour
duration and practical test for engineering trade shall be 6 to 8 hours minimum
and non-engineering it shall be of 4 hours minimum. Assessing Bodies while
preparing practical test shall ensure that candidate shall be tested on all the
competencies prescribed in the course module.
8.4 Selection Process:
The following process shall be followed to empanel the Assessing Body and
assessors to carry out assessments under SDIS.
8.4.1 Submission of application for empanelment:
i.
Hard copy of the application form with the supporting documents shall be
submitted to DGE&T to validate the eligibility of the Assessing Body as per
the Selection criteria provided in this document.
ii.
An exclusive register will be maintained in DGE&T to record the receipt of
the application.
iii.
An acknowledgement shall be sent to the applying organization through email by DGE&T.
45
8.4.2 Criteria for Assessing Body
i. The applicant shall legal entity, registered in India.
ii. The applicant should have in last two years carried out competency / skill assessment for
minimum 1000 persons or should have trained minimum 1000 persons and got tested by
some agencies such as NCVT, Sector Skill Council, State, board/ council and reputed
industry Association. Organizations having experience in testing of competencies would
be preferred.
iii. In case more number of applications is received, preference will be given to those
organizations that have trained/assessed larger number of persons
iv. The applicant is not a Vocational Training Provider in the same sector and in same State
in SDI scheme but it can be VTP in other States, other Sectors or other scheme.
v. The applicant shall have access to technically qualified personnel of repute and integrity in
different industrial trades and technology.
vi. The applicant shall develop dedicated human resource for handling the processes in SDIS
assessment process.
vii. The applicant shall declare its linkages with other organization(s), if any to ensure
independence and avoid any conflict of interest.
viii. Institutions/ Firms blacklisted by any Government Department shall not be considered in
this RFP.
ix. The Applicant shall provide the information and supporting documents towards their claims
8.4.3 Criteria for assessor
i. Education and experience criteria: Should be a NTC or NAC holder /diploma,
degree holder with more than 2 years experience. The experience shall be in
teaching or in relevant industry. Educational qualification should be relevant to
the module for which the assessor is being empanelled.
46
8.4.4 Competency evaluation of assessors
i.
Based on the module and sector that will be handled by the assessor,
DGE&T shall direct the assessing body to send its assessor for competency
evaluation in the institutions which will be notified by DGE&T time to time.
The assessor will be assessed to ascertain the competency to carry out
competency based assessment under SDIS.
ii.
The parameters on which the competency of the assessor will be evaluated
is as given below:
a.
Demonstrate vocational competencies at the level of assessment to
be carried out for the MES module.
b.
Knowledge about the stages of assessment process, competency
based assessment, assessment tools, evidence collection, maintaining
records and reporting guidelines prescribed by DGE&T
The following components of assessments will be administered to the assessor
a.
Verify the educational qualification and experience of the assessor
b.
Written test to check the knowledge on the modules for which
he/she is an assessor and to assess the knowledge on assessment
principles, processes as prescribed by DGE&T
c.
Practical demonstration of competency required for the modules
for which he/she is an assessor
8.4.5 Award of Empanelment
Initially provisional empanelment will be awarded to the organizations based on
the evaluation of eligibility of the Assessing Body based on the criteria mentioned
in Section 7.4.2. Final empanelment would be granted subject to the Assessing
Body fulfilling the following conditions:
i.
Identifying competencies required for assessment in the modules for which
provisional empanelment has been awarded,
47
ii.
Identifying ways to measure the competencies
iii.
Deciding on the type of evidence that has to be collected for the modules for
which the provisional empanelment has been awarded and
The documents submitted by Assessing Body in respect of i, ii, iii above will
be evaluated by DGE&T internally or through notified institutions.
iv.
Getting the competencies of 2 assessors of each module evaluated in the
institutes notified by the DGE&T
Only assessors who qualify the evaluation process will be eligible to carry out
assessment under SDIS.
Assessing Body has to enter into contractual agreement with DGE&T. DGE&T
will grant empanelment to new assessing Body only after Assessing Body signs
a contract of agreement with DGE&T. In case of already empanelled Assessing
Bodies, such Assessing Bodies have to sign contract of agreement with DGE&T
by 30-08-2014.
8.4.6 Registration of assessing body in portal
i.
The software team in DGE&T help desk will register the assessing body in
the portal and create login for the assessing body and their state users.
ii.
Assessing body shall register the assessors with all the mandatory
information required in the portal and on approval from DGE&T, the
assessor can take up assessment through Assessing Body.
8.4.7 Inclusion of new assessors:
i.
Assessing body should apply to DGE&T for including new assessors into
SDIS. After the evaluation of the eligibility criteria, the Competency
evaluation of the assessor will be scheduled and based on the result,
approval for the assessor will be given.
48
ii.
Assessing body can register the assessor in the portal and on approval from
DGE&T, the assessor can take up assessments through the assessing
body.
8.5 Suspension/De-paneling of Assessing body/ Assessor
i.
Assessing Bodies shall enter assessment schedule within 5 days from the
date of issue of ABNs and if Assessing Body does not upload the
assessment schedule within this period, it would be considered as a default.
Any Assessing Body committing six or more such defaults in a quarter
would not be allotted further assessments for at least a quarter.
ii.
Assessing Body shall upload the outcome of the assessment on the portal
within 7 days from the date of assessment and if the outcome of the
assessment is uploaded after seven days, it will be considered as a default.
Allotment of further assessments to such Assessing Body making three or
more such defaults in a quarter would be suspended for at least three
months.
iii.
If an Assessing Body conducts assessment after seven days of completion
of training for more than 5 batches in a quarter, no further assessments
shall be given to the Assessing Body for one quarter.
iv.
If the assessing bodies which has already been empanelled by DGE&T
does not enter into contract agreement before 30-8-14, the assessing body
will be de-empanelled.
8.6 Quality Systems and Process requirements:
i.
Should establish internal processes/methods to monitor measure and
improve the performance of its internal staff and assessors during planning,
execution and reporting the assessment through.
ii.
Should develop “question banks” for random selection of questions along with
the questions from NIMI ‘question bank’ wherever they are available. Process
for regular maintenance and update the question bank should be defined.
49
iii.
Should develop well-defined process for selection, empanelling and capacity
building of assessors
iv.
Should develop detailed internal assessment guidelines for evidence
collection, recording, marking and reporting of the assessment results in line
with the guidelines issued by DGE&T.
8.7 Pre- Assessment
i. DGE&T will develop systems and processes to allot batches for assessment to
assessor from a particular assessing body based on roster and the proximity
to the training center. Until then, RDAT will allot batches to the Assessing
Bodies on rotational basis depending on the presence of assessing body in
that region sector wise and the assessing body in coordination with VTP and
assessor should confirm and schedule the assessment. In this regard, RDAT
will prepare a register listing the names of Assessing Bodies and the names of
Assessing Bodies shall be serialized on the basis of date of order issued by
DGE&T relating to empanelment. In case the date of empanelment is same,
then the Assessing Bodies shall be serialized alphabetically. RDAT will
communicate Assessment Batch Number on first come first basis to Assessing
Bodies on receipt of information of issuing of Training Batch Number.
ii. The Assessing Body shall confirm the date of assessment in consultation with
Vocational Training Provider (VTP) and communicate to the RDAT/State.If for
an unforeseen reason, the date of the assessment is changed, the Assessing
Body should inform the RDAT, VTP, State Director/UT & candidates of the
same & also about the rescheduled assessment date & time.
iii. The Assessing Body shall form a panel of assessors of high repute and integrity
SDIS sector wise and location wise. The assessors should have (i) relevant
academic, occupation qualification, (ii) understanding of factors to be
considered for assessment of competencies at various levels, (iii) have
considerable hands on experience and occupational expertise, (iv) possess
keen observation skills, (v) be able to communicate in local language, (vi)
50
knowledge of standards and forms of assessment to be used, (vii) be humane,
kind and sympathetic.
iv. The assessment of the candidates shall be done by the Assessing Bodies in
designated Testing Centre (TC). The Testing Centre where the assessment is
carried out and Testing Centre may also be VTP. The Assessing Body would
select the TC based on the location, accessibility and the infrastructure
facilities available for conducting the test.
v. The Assessing Body would provide details of selected TC along with skill areas
in which assessment can be done at the TC, to the RDAT and respective
States/UTs.
vi. The Assessing Bodies will depute those assessors for assessments whose
details are furnished by Assessing Bodies to DGE&T in advance. Assessment
done by assessors whose details are not furnished by Assessing Bodies in
advance will be declared void and reassessment of such batch will be done by
the Assessing Bodies on their own cost.
vii. Assessing Body will communicate to the Testing Centre following:
a. Details of the candidates to appear for assessment in various MES
courses.
b. Details of Assessors selected with their contact details.
c. Requirement of infrastructure, raw material etc.
d. Testing charges to be reimbursed to Testing Centre
8.7.1 In case of Direct Assessment:
Testing centers will be registered by States on the same line as for VTPs.
Candidates desire to get the skills certified have to apply on line or through
Testing Centers. Assessing Bodies /assessors will be allotted automatically by
the IT application. This facility is being provided on the web-portal of SDI
scheme. Until then following procedure will be adopted for direct assessment:
51
 Assessing Bodies shall be responsible for registration of candidates for
testing. It may do so directly or through its designated centers or VTPs.
 Candidates would also be allowed to get registered themselves either
directly on the portal or through Testing Centre concerned.
 Assessing Bodies shall apply online list of candidates to be assessed to
respective RDAT who, in turn, shall acknowledge the same by allotting
ABN. RDAT shall make schedule of trade test, including date, time, list of
candidates and location of designated Testing Centre under intimation to
AB.
 AB shall inform in advance about the courses, candidates list, and
requirement of raw material to Testing Centre in advance.
 ABs shall be responsible for preparation of question papers both for theory
and practical test based on the approved criteria etc.
8.7.2 Preparation of assessment tools and prerequisites:
 The assessment tools shall contain components for testing the knowledge,
application of knowledge and demonstration of skill. The knowledge test can
be objective paper based test or short structured questions based. The
application of knowledge can be verified based on questioning or seeking
response for a case. Demonstration of skill shall be verified based on
practical demonstration by the candidate by using competency checklist.
 Assessing body should ensure that 80% of the questions in both theory and
practical assessment shall be used from question banks prepared by NIMI
wherever they are available.
 The assessing body shall ensure that all the assessors are provided with the
MES module course curriculum for which they are eligible to carry out
assessment. The module’s curriculums are available on DGE&T website.
52
 The type of assessment tools to be used for assessment should be prepared
in advance by the assessing body in accordance to the guidelines as
prescribed below:
1. Define the performance objective – This should be based on the course
objectives and competency in workplace as prescribed by MES
curriculum. The written tests and practical tests should assess all the
competencies mentioned in course curriculum.
2. In case of practical test, clearly mention the operations which are to be
observed in case of process test (how a particular task is being carried
out) and the specifications of the final product in case of product test (the
task in itself).
3. List of tools, infrastructure, and equipments to carry out the assessment
should be prepared based on the test instruments that are planned to be
used.
4. Prepare written directions to be given to the candidates before the task
is attempted.
5. Scoring system, observational checklist and rating scale should be
prepared for each competency which is going to be assessed.
6. The checklist and rating scale should have sufficient space to record
observations.
8.7.3 Pre-assessment activities for Assessor at the Testing Centre
i. The assessor should carry a copy of the MES module course curriculum to the
assessment.
ii. Assessor should carry the attendance sheet, question papers and answer
sheets as applicable, competency result sheet,
iii. Verification of student credentials: The assessor should check the application
form submitted by the candidates and verify the photo pasted on the forms with
53
candidates who are taking assessment. The checklist in Annexure 3 shall be
utilized for the same.
iv. Verification of testing center for adequate infrastructure, tools and equipments:
The assessor should verify the availability of infrastructure, tools and
equipments for carrying out both theory and practical assessments. The
minimum requirements prescribed under the MES modules shall be used as
benchmark.
v. Verification of qualification of instructor: The assessor should verify the
qualification and experience of the instructors in the training center
vi. Attendance verification: The assessor should check the attendance register of
candidates and instructors until the time biometric attendance system is put in
place. Once the biometric attendance system is in place, the biometric
attendance of assessors along with that of trainees/candidates should be
captured during the assessment at the start as well as end of theory and
practical test.
vii. Attendance during assessment: The assessor should take the attendance of all
the students who appear for assessment after the successful verification of the
student credentials and before the start of the assessment. The assessor
should also provide his/her attendance during start and end of the practical and
theory test.
viii. Pre-Assessment checklist: The assessor should fill the pre-assessment
checklist as given in Annexure 4 along with the start time and end time of
assessment after verifying all the above tasks
ix. Verification of the documents related test carried out by VTP/ Testing Centre
(TC) for candidates who were not able to produce document in support of
having passed the qualification.
8.8 Assessment activities
i.
Before the start of assessment, read out the instructions to the students.
54
ii.
The written test shall be for fixed duration as prescribed.
iii.
The practical test shall be for fixed duration as prescribed. Assessor shall
observe that all candidates are performing the practical test.
iv.
Ensure that individual attention is given to all the candidates during the
practical test.
v.
Photographs: The assessor should take photographs during the assessment
process. The following photos should be taken by the assessor
a. One group photo of all the students in the testing center
b. 2 photos each of the students during theory and practical tests
c. 1 photo of practical lab/workshop showing the equipments to be used for
assessment
d. 1 photo of the assessor along with the students appearing for the
assessment.
8.9 Post-assessment activities
8.9.1 Consolidation and reporting of results by assessor
i.
The assessor should consolidate all the theory and practical test papers and
ensure that all the mandatory information is filled. The total score for each
student should be calculated and recorded in Result sheet as given in
Annexure 5.
ii.
The assessor should send the attendance sheet, Result sheet, answer
papers by courier/post to the assessing body immediately after the
completion of assessment
8.9.2 Uploading outcome of the assessment and photos in portal by assessing
body
i.
Assessing body should upload the results within one week of the
assessment date.
55
ii.
Photos taken by the assessors during assessment should be sent to
respective RDATs through e-mail only.
Non dispatch of photos of
assessment to RDAT will make assessment void. Re-assessment of such
batch will be done by the Assessing Bodies on their own expenses.
iii.
Details of assessors as per annexure-6 should be emailed to RDAT at the
time of uploading the outcome of the assessment. Outcome of the
assessment will not be accepted in case details of assessors are not emailed
to respective RDAT. This procedure will be applicable till automatic selection
of assessors is provided on the web-portal of SDIS.
8.9.3 Maintaining assessment records
i.
Assessing Body shall maintain full and complete record pertaining to
attendance sheets, result sheet, answer papers, etc. and shall preserve all
the records in the form of soft copy (CD/ DVD) for at least 2 years to make it
available to the authorized representatives of DGE&T/ RDAT at any time.
8.10 Publishing of results and Certificate issue
i.
RDAT shall verify the outcome of the assessment, details of assessors,
photos and print and sign the certificates for successful candidates and send
it to the respective candidates. In case of direct candidates assessment, the
Certificates would be sent to the Assessing Body.
ii.
Certificates which will be issued will carry photograph of the trainee, name of
VTP, start date & end date of training and duration of training once the
systems for the same are put in place.
8.11 Assessment fee and Claim generation
i.
Once the results are published, the Assessing body shall submit the hard
copy of result sheet duly signed by concerned RDAT along with bill generated
by the portal while submitting bills to States. The payment for assessment to
the assessing bodies will be as per the below norms.
56
a. When assessor and VTP are in same district – Rs 800 per candidate
assessed
b. When assessor is from same State/UT as that of VTP but are from a
district other than that of VTP – Rs 1200 per candidate assessed.
c. When assessor is from State/UT other than that of VTP and none of them
is from the special areas – Rs 1500 per candidate assessed
d. When assessor is from State/UT other than that of VTP and either
assessor or VTP is from the Special areas – Rs 2000 per candidate
assessed.
ii.
The payments towards assessment would be made at the rate prescribed
only if the assessments are carried within 3 days of completion of training and
in case of delays, the reductions as indicated below would be applied
a. If the assessments are carried out from 4th day of completion of training till
10th day, 15% deduction
b. If the assessments are carried out from 11th day of completion of training
period and till 20th day, 30% deduction
c. If the assessments are carried out beyond 20 days of completion of
training period, 45% deduction.
iii.
Funds will be transferred from DGE&T to the State Society which, in turn,
shall make payments towards reimbursements. The payments towards all
reimbursement claims shall be settled within 30 days from the date of receipt
of bills. If there are any discrepancies in the bills submitted by the VTPs and
ABs, the society shall return the said bills within 7 working days from the
receipt of bills.
iv.
States/UTs would reimburse remaining 25% of the amount of assessment
fee, which was not paid by the candidates belonging to disadvantaged group
57
like SC/ST/OBC/ Women/Persons with disabilities before 11.9.2013, from the
scheme funds.
9 Monitoring & Evaluation of the performance of the VTP
Separation of training delivery and assessment functions are aimed at ensuring
quality. Performance of the VTPs is closely monitored based on the output and
outcome of training provided by them.
9.1 Web based software for implementation, monitoring and evaluation
Web based software will be used for implementation, monitoring and evaluation of
the scheme. Web based software will be required to achieve the target of the
scheme with in the stipulated period with limited staff available at Central and
State levels. It will help in monitoring the activities of the scheme effectively.
Some of the features of the software are given below:i.
On line registration of persons seeking training or testing of their skills
ii.
Admit card/ Attendance generated by portal shall have photograph of
candidates.
iii.
Reports about number of persons undergoing training – course-wise and in
which VTPs can be generated.
iv.
Reports about numbers of persons trained - course wise and by which VTPs
and when, can be generated.
v.
Reports about number of persons assessed - course wise and by which
Assessing Body and when, can be generated.
vi.
Reports about number of persons certified - course wise and by which
Assessing Body and when can be generated.
vii.
Information about VTPs along with courses offered,
viii.
Information about TCs along with details of courses in which testing can be
done.
ix.
Information about assessing bodies
x.
Certificates will be prepared.
58
xi.
A system to allow communication through SMS and e-mail is being created
so that communication between various stakeholders could take place
timely.
xii.
SDI portal will enable direct feedback on placement data by trained persons
& employers through controlled access.
xiii.
An interactive dashboard exclusively for students will be created on the
portal wherein students can post their views in respect of training, VTP,
assessment employment etc. The portal will have provision to collect the
feedback from employers in order to assess the quality of youth who pass
out from the VTPs
9.2 Tracer studies
Tracer study will evaluate the performance of Vocational Training Providers
(VTPs) in respect of training infrastructure, capability of instructional staff,
employment of passed out trainees, modules in terms of employability,
performance of head office of Assessing Bodies, assessment procedure,
capability of assessors, performance of assessed trainees, employment status of
passed out trainees and problems faced by them in implementing the scheme.
Post-training evaluation of 1% persons certified is done every year. Tracer studies
and survey of employers is used to evaluate the outcome of the training.
9.3 Mid–term review of the scheme
Assessment of the implementation of the Scheme would be made after three
years of commencement, and mid-course corrections, if needed, would be made
with the approval of Apex Committee.
The Apex Committee will consider the models suggested by National Knowledge
Commission and Task Force on Skill Development and may modify the scheme, if
required.
9.4 Third Party Monitoring of Program Implementation
Third party monitoring agencies will be engaged for verification of infrastructure of
VTP, verification of student credentials, verification of credentials of trainers and
59
assessors, checking for compliance in curriculum used, training delivery and
assessment processes, etc.
Agencies will be selected based on bidding process carried out by DGE&T as
defined in the GFR 2005 and they will be initially engaged for two years. Their
contract may be extended based on their performance for further one year and
subsequently for another one year only.
Work will be allocated to agencies on random basis or on specific feedback.
Findings of the agencies would also be placed on web-portal. Country will be
divided into about 10 zones.
10 Expectations from other Stakeholders
10.1 Employers & employees organizations:
i. Forecasting of emerging areas for employment and skill mapping
ii. Developing of competency standards
iii. Providing guest faculty & assessors
iv. Training of trainers & assessors
v. Encouraging & deputing workers for training
vi. Making available training & testing facilities
vii. Monitoring & evaluation
viii. Assisting trainee in getting employment
10.2 International Organizations:
i.
Exposure to International good practices
ii.
Capacity building in the area of planning, implementation and monitoring of
Skill Development program for the Informal Economy
iii.
Capacity building in the area of development of competency standards,
curricula, learning material, assessment standards etc.
iv.
Implementing pilot programs
60
10.3 State Governments:
i.
Identifying training providers and assessing bodies
ii.
Providing full support to the assessing bodies
iii.
Assessing of labour market demand & curriculum development
iv.
Giving wide publicity
v.
Implementing MES program in ITIs/ITCs
vi.
Providing Post training support
vii.
Close monitoring & evaluation to ensure quality
viii.
Setting up of dedicated MES cells
ix.
Setting up of Society/MES Cell
x.
Registration of VTPs.
xi.
Reimbursement of Training cost and Assessment cost.
xii.
Issuance of fund utilization certificate to DGE&T, New Delhi.
10.4 NGOs/ Vocational Training providers:
i.
Counseling & vocational guidance
ii.
Providing good quality training
iii.
Providing training in a flexible mode to suit trainees needs
iv.
Post training support to trainees
v.
Maintaining information on trainees trained and outcome of training
vi.
Scheme Outlay
11 Scheme outlay
The total cost of the scheme was Rs. 550/- crore during XI plan period. The
scheme is 100% funded by the Central Government. The financial outlay for 12th
plan period is Rs 2000 crore to skill and certify 25 lakh people. The Apex
Committee will review the costs regularly and revise them as required. Expenditure
on training support services, studies, and administrative cost would cover:
 Labour market surveys,
 Publicity
61
 Development of curricula, assessment standards and instructional and
learning material
 Training of trainers and assessors
 Training and development of project officers in planning, implementation and
monitoring of the scheme
 Training and development of a team of experts/ capacity building in the area of
development of competency standards, competency based curricula, learning
material, assessment standards etc. to the global standards
 International fellowships/ training on good practices for training in the informal
sector
 Tracer and evaluation studies
 Consultancies
 Organizing workshops/ seminars/ review meetings/ Inspections
 Development of web based software
 Setting up and functioning of the ‘Project Management Cells’ and MES
Regional Cells
 Implementing and monitoring cost and other miscellaneous expenditure
62
Annexure 1 Contract Agreement between State DET and VTP
THIS AGREEMENT is entered on ...... Day of Month ....................... in the Year 201_
BETWEEN
<State DET Society> having their office at ………………………………………………..
……………………………………………………………………………….represented
through...................................................................................
(Hereinafter
called
the
“First Party") which expression shall unless repugnant to the context thereof shall mean
and include its administrator, successor in office, representative, assigns.
And
The Vocational Training Provider………….........................................……………having
their
office
at
…………………………………………………………………………………………….
represented through .............................................................. (Hereinafter called the
“Second Party”) which expression shall unless repugnant to the context thereof shall
mean and include its successors, heirs, assigns, representative.
63
WHEREAS
(a) The First Party, is a state level society set up under the Department of
Employment and Training, State to implement Skill Development Initiative
Scheme (SDIS), which was launched by Directorate General of Employment and
Training (DGE&T), Ministry of Labor and Employment. SDIS is a Centrally
Sponsored Scheme to provide vocational training, test and certify people.
(b) The Second Party, Name of organization and about the organization
(c) The First Party released advertisement for selection of qualified and competent
Vocational Training Providers (VTP) to impart skill development training.
(d) The Secord Party applied to The First party to take up skill development training
program on the behalf of The First Party under SDIS. The Second Party
represented to the First Party that it had the required professional skills and
infrastructure and proposed to offer its Services to the First Party on the terms
and conditions as set forth in this agreement;
(e) The First Party has verified the documents and application form submitted by the
Second party and carried out physical verification of infrastructure and found the
second party to poses the capability to impart skill development training.
(f) NOW THIS AGREEMENT is entered by and between the parties hereto for
imparting employment oriented training to the youth in <state name> on the
terms, conditions and stipulations as set forth hereunder:
1. Definitions and interpretations:
Unless the context otherwise requires, the following terms whenever used in this
Contract have the following meanings:
1.1 “Applicable Law” means the laws and any other instruments having the force of law
in India for the time being.
64
1.2 “Contract/ Agreement” means the Contract signed by the Parties and all the
attached documents
1.3 “Party” means the “<State DET Society>” being the First Party or the “Vocational
Training Provider / VTP” being the Second Party, as the case may be, and “Parties”
means both of them.
1.4 “Effective Date” means the date on which this Contract comes into force and effect.
1.5 “Skill Development Initiative Scheme” or “SDIS” means the 100% centrally
sponsored scheme to provide skill development training and certification to workers
seeking certification of their skills acquired informally, early school drop-outs and
unemployed, workers and ITI graduates seeking skill up gradation and previously
child labour and their families.
1.6 “Vocational Training Provider” or “VTP” means an institution which provides skill
development training and is empanelled by State DET Society through this Contract
/ Agreement.
1.7 “DGE&T” means the Directorate General of Employment & Training, Ministry of
Labour and Employment
1.8 “Assessing Body” or “AB” means an institution empanelled by DGE&T to carry out
assessment of the candidates trained by VTP
1.9 “Regional Directorate of Apprenticeship Training” or “RDAT” means the institution
involved in implementation of SDI scheme with respect to assessment process by
assigning training batches for assessment to assessment bodies and publishing the
results of assessment.
1.10 “NCVT” means National Council for Vocational Training
1.11 “Registration” means allowing VTP to start training on the registered modules.
1.12 “Third Party” means any person or entity other than the “<State DET Society>” or
the “Vocational Training Provider”.
65
1.13 “TBN” means Training Batch Number which is a unique number given to a training
batch which will be run by Vocational Training Provider.
1.14 “Candidates” means Indian citizen above 14 years of age who want to be trained &
assessed or want to be assessed for prior learning under Skill Development
Initiative Scheme (SDIS)
1.15 “Guidelines” means the implementation guidelines and amendments issues by
DGE&T, Ministry of Labour and Employment.
1.16 “Scheme” means Skill Development Initiative Scheme (SDIS) that is implemented
by the “First Party”.
1.17 “Government” means the Government of India and Government of <State>.
1.18 “Services” means the work to be performed by the Vocational Training Provider
pursuant to this Contract.
1.19 “In writing” means communicated in written form with proof of receipt.
1.20 The following documents along with all addenda issued thereto shall be deemed
to form and be read and construed as integral parts of this Agreement and in case
of any contradiction between or among them the priority in which a document
would prevail over another would be as laid down below beginning from the
highest priority to the lowest priority:
1.20.1 Guidelines issued by DGE&T on 11-9-13, 18-10-13, 19-12-13 and guidelines
which may be issued henceforth over the period of contract;
1.20.2 Agreement;
1.21 If any doubt arises as to the interpretation of the provisions of this Agreement or as
to matters not provided therein, the parties to this Agreement shall consult with
each other for each instance and resolve such doubts in good faith.
66
2. Roles and Responsibilities:
2.1
The First Party:
2.1.1 Shall advertise about the scheme for mobilization of candidates for training,
informing potential VTP about the program and improving the program awareness
among general public.
2.1.2 Shall approve the Second Party to conduct training program under SDIS after
inspection of the infrastructure as per the mandatory requirements.
2.1.3
Shall approve the course modules in which training can be imparted by the
Second Party.
2.1.4 Shall approve the training calendar which is submitted online by the by The
Second Party and facilitate generation of TBN.
2.1.5 Shall make training fee payments and boarding and lodging fee payment within
the time limits as prescribed in the guidelines issued by DGE&T
2.1.6 Shall monitor and evaluate the performance of Second Party on timely basis.
2.2
The Second Party:
2.2.1 Shall issue admission notice, from time to time for the courses that are offered and
may also circulate publicity materials such as pamphlets, brochures etc. in order
to create awareness about the courses, facilities, etc.
2.2.2 Shall mobilize the candidates who are eligible for getting trained in a specific
module for which approval has been granted by The First Party.
2.2.3 Shall register and enroll candidate in the SDI web portal by providing all
mandatory information. Shall implement Central government /State Government’s
reservation policy which is applicable for ITIs as the case may be.
2.2.4 Shall run only those MES courses for which it is registered with the First Party.
67
2.2.5 Shall ensure the availability of infrastructure, tools and equipments as per the
requirements for the module as approved by NCVT.
2.2.6 Shall appoint qualified and trained instructional staff and ensure their presence
throughout the duration of training.
2.2.7 Shall provide good quality training to the candidates in the stipulated time with
adequate hands-on experience.
2.2.8 Shall forward the batch for assessment to RDAT for allotting Assessing body /
Assessor.
2.2.9 Shall coordinate with the Assessor and Assessing body and ensure that
assessment is carried out on the scheduled date for all the candidates who
appeared for training and are eligible for assessment.
2.2.10 Shall ensure that trained candidates are present and infrastructure, tools &
equipments are available for assessment.
2.2.11 Shall provide boarding and lodging to all candidates if applicable.
2.2.12 Shall comply with all processes required to maintain information at the SDIS
portal and shall provide necessary IT infrastructure and manpower for the same.
2.2.13 Shall maintain biometric attendance for all candidates under training and trainers
from the time DGE&T sets up the system and until then shall maintain the manual
attendance for the candidates and trainers.
2.2.14 Shall allow authorized officers of RDAT/DGE&T /First Party dealing to inspect the
training infrastructure available in its premises for courses/modules under SDI
scheme.
2.2.15 Shall not make First Party / RDAT / DGE&T / a party in any disputes arising in its
premises.
2.2.16 Shall abide by all the instructions prescribed in the Implementation Manual and
those issued by DGE&T from time to time.
68
2.2.17 Shall distribute the certificates issued by RDAT to the candidates within the time
limit as prescribed in guidelines.
3. Deliverables
3.1 The First Party:
3.1.1 Shall allot Training Batch Number (TBN) based on the training calendar submitted
by the Second Party within the time duration as prescribed in the guidelines
issued by DGE&T or reject the training calendar by recording the valid reasons.
3.1.2 Shall make payment to the Second Party after the verification of the cost claims
and mandatory documents submitted by the Second Party within the time duration
as prescribed in the guidelines issued by DGE&T.
3.2
The Second Party:
3.2.1 Shall ensure that at least 60% of candidates appearing the assessment, Pass the
assessment in 3 out of last 5 batches.
3.2.2 Shall ensure that for at least 80% of the trainees passing out of every batch,
placement is facilitated and the details of placement, salary/income is entered in
the portal when the provisions are made by DGE&T. It shall be ensured that the
sector of placement is in sync with the area of training provided.
4.
4.1
Key Terms of the agreement
Process Guidelines: The Second Party shall refer and follow the process
guidelines as notified by the DGE&T and the First Party from time to time for
conduct of any of the activities outlined in this section.
4.2
Registration and enrollment of candidates:
4.2.1 Second Party shall register and enroll the Candidates in SDI web portal by
providing the details as per the guidelines.
4.3
Training Batch Number (TBN) generation:
69
4.3.1 Second Party shall submit training calendar indicating the likely start date and end
dates batch wise / module wise to First Party for approval.
4.3.2 First Party shall issue TBN or reject request for issue of TBN within prescribed
time limit as per guidelines failing which the TBNs would be generated without
waiting for any more clearance from the First Party.
4.4
Training process:
4.4.1 The Second Party shall set up the necessary infrastructure, trainers and systems
in place before starting the trainings.
4.4.2 Second Party shall impart training as per the course contents prescribed in the
MES module and give sufficient hands on training to the candidates.
4.4.3 A system of capturing bio-metric attendance shall be in place is capture the
attendance of the students twice a day and transfer to the central server as and
when mandated by DGE&T and First Party.
4.4.4 Second Party shall ensure the regular availability of the instructors during the
training period as per the guidelines.
4.4.5 The Second Party shall provide Boarding & Lodging facilities to the trainees
wherever necessary.
4.5
Assessment and Certification:
4.5.1 Each candidate has to be assessed and certified as per the mechanism laid down
by DGE&T. The assessment will be carried out by Assessor from an Assessing
Body which is empanelled by DGE&T and will be allotted by RDAT. The
certification will be done by NCVT.
4.5.2 Second Party shall ensure that all infrastructures, tools, equipment are made
available to the assessor during assessment and all the students are present for
the assessment.
4.6
Placements:
70
4.6.1 Second party shall ensure employment to the candidates after the end of training
and assessment by partnering with potential employers.
4.6.2 Second party is eligible for incentive and advance payment as per prescribed in
guidelines issued by DGE&T.
4.7
Claim generation:
4.7.1 Second party’s reimbursements claim for training cost and boarding and lodging
shall be submitted to First Party.
4.7.2 The mode of payment, timelines and terms of payment by the First party shall be
as per guidelines issued by DGE&T.
5.
5.1
Fraud, Corruption and Termination
Definitions: It is the First Party’s policy to require that First Party as well as
Second Party observe the highest standard of ethics during the execution of the
Contract. In pursuance of this policy, the Second Party define, for the purpose of
this provision, the terms set forth herein below:-
5.1.1 “Corrupt practice” means the offering, receiving, or soliciting, directly or indirectly,
of anything of value to influence the action of a public official in the selection
process or in contract execution;
5.1.2 “Fraudulent practice” means a misrepresentation or omission of facts in order to
influence a selection process or the execution of a contract;
5.1.3 “Coercive practices” means harming or threatening to harm, directly or indirectly,
persons or their property to influence their participation in a procurement process,
or affect the execution of a contract;
5.1.4 “Restrictive practice” means forming a cartel or arriving at any understanding or
arrangement among organizations with the objective of restricting or manipulating
the selection process or the execution of a contract.
5.2
Termination by the First Party
71
5.2.1 The First Party may terminate the agreement with Second Party after providing a
written notice, seeking explanation, after the occurrence of any of the below
events and Second Party neither responds to the written notice issued by First
Party within thirty (30) days of receipt nor remedy the breach or any failure as
observed by the First Party through the written notice to the satisfaction of First
Party, but not limited to:
5.2.2
If Second party does not comply with the guidelines issued by DGE&T with
respect to registration of Second Party, registration and enrollment of candidates,
training process, assessment process and any related process as mandated in
the guidelines.
5.2.3 If it is discovered at any stage that the Second party has been furnishing false
claims or providing misleading information, document, data or statement with
respect to registration and enrollment of candidates, conduct of training or any
other aspect related to the program.
5.2.4
If it determines at any time that representatives of the Second Party were
engaged in corrupt, fraudulent, coercive or restrictive practices during the
selection process or during the execution of the contract, without the Second
Party having taken timely and appropriate action satisfactory to the First Party to
remedy the situation;
5.2.5 The Second Party becomes insolvent or bankrupt or enters into any agreement
with its creditors for relief of debt or take advantage of any law for the benefit of
debtors or goes into liquidation or receivership whether compulsory or voluntary;
5.2.6 The Second Party fails to comply with any final decision reached as a result of
arbitration proceedings;
5.2.7 The Second Party fails to comply with the decisions of the First Party;
5.2.8 The First Party may also sanction an order against the Second Party, including
declaring the Second Party ineligible, either indefinitely or for a stated period of
time, if at any time it is determined that the Second Party has, directly or through
72
an agent, engaged in corrupt, fraudulent, restrictive or coercive practices in
empanelment, or in executing the contract or did not comply with the guidelines
issued by DGE&T;
5.3
Termination by the Second Party - The Second Party may, by not less than
thirty (30) days’ written notice to the First Party, such notice to be given after the
occurrence of any of the events, terminate this Agreement if:
5.3.1 The First Party is in material breach of its obligations pursuant to this Agreement
and has not remedied the same within thirty (30) days (or such longer period as
the Second Party may have subsequently agreed to in writing) following the
receipt by the First Party of the Second Party ‘s notice specifying such breach; the
Second Party becomes insolvent or bankrupt or enters into any agreement with its
creditors for relief of debt or take advantage of any law for the benefit of debtors
or goes into liquidation or receivership whether compulsory or voluntary;
5.3.2 The First Party fails to comply with any final decision reached as a result of
arbitration.
5.4 Mutual termination
5.4.1 Any of the parties, in writing, may terminate the instrument in whole, or in part, at
any time before the date of expiration with a notice period of 6 weeks, after
settlement of dues of all imparted services till date of termination.
6.
It is mutually understood and agreed by and between the parties
that:
6.1
MODIFICATION: Modifications within the scope of the instrument shall be made
by mutual consent of the parties, by the issuance of a written modification, signed,
and dated by all parties, prior to any changes being performed.
6.2
INFORMATION OWNERSHIP: All information provided by The First Party shall
only be utilized for conducting training and placement and The First Party holds
no ownership over the content prepared by The Second Party.
73
6.3
PARTICIPATION IN SIMILAR ACTIVITIES: This instrument in no way restricts
The First Party from participating in similar activities with other public or private
agencies, organizations, and individuals.
6.4
NON-FUND OBLIGATING DOCUMENT: This instrument is neither a fiscal nor a
funds obligation document.
6.5
ESTABLISHMENT OF RESPONSIBILITY: This contract agreement is not
intended to, and not creates any right benefit or trust responsibility, substantive or
procedural, enforceable at law, by a party against The First Party or The Second
Party.
6.6
COMMENCEMENT/EXPIRATION DATE: This instrument is executed as of the
date of last signature and is effective upto 2 (Two) years and will expire unless
extended.
6.7
AUTHORIZED REPRESENTATIVES: By signing below, the individuals signed in
this document as representatives of The First Party and The Second Party are
authorized to act in their respective areas for matters related to this contract.
6.8
ARBITRATION: It is agreed by both the parties that any difference of dispute
arising upon or in relation or in connection with the contract between both the
parties, which has not been settled amicably shall be referred to Sole Arbitrator to
be nominated by the First Party under the provisions of (Indian) Arbitration and
Conciliation Act, 1996 and the award so given by the Arbitrator will be wholly
binding on all the parties and shall not be questioned under any circumstances.
The parties hereto have executed this Contract as of the last written date below.
In WITNESS WHEREOF, the parties hereto have caused this agreement to be made in
English and executed by their respective duly authorized representatives of the day and
the year first above written
For
For
<State DET Society>
<Name of VTP>
74
(The First Party)
(The Second Party)
Name:
Name:
Designation:
Designation:
Date:
Date:
Annexure 2 - Contract Agreement between DGE&T and Assessing Body
THIS AGREEMENT is entered on ...... Day of Month ....................... in the Year 201_
BETWEEN
Directorate General of Employment and Training (DGE&T) having their office at Shram
Shakti
Bhavan,
Rafi
Marg,
New
Delhi
–
...................................................................................
110001
represented
(Hereinafter
called
the
through
“First
Party") which expression shall unless repugnant to the context thereof shall mean and
include its administrator, successor in office, representative, assigns.
And
The Assessing body ………….........................................…………… having their office at
…………………………………………………………………………………………….
represented through .............................................................. (Hereinafter called the
75
“Second Party”) which expression shall unless repugnant to the context thereof shall
mean and include its successors, heirs, assigns, representative.
WHEREAS
(g) The First Party, comes under Ministry of Labour and Employment and
implements Skill Development Initiative Scheme (SDIS) scheme, which is a
Centrally Sponsored Scheme to provide vocational training, test and certify
people to improve their employability and gain employment.
(h) The Second Party, <Name of organization and about the organization>
(i) The First Party through State governments and RDAT implements the SDI
scheme across the country and empanels Assessing bodies to assess the
candidates trained by Vocational Training Providers (VTP).
(j) The Secord Party applied to The First party to empanel itself to assess the
competency of the candidates trained by VTP and candidates with prior learning
on the behalf of the First Party under SDIS. The Second Party represented to the
First Party that it had the required professional skills and infrastructure and
proposed to offer its Services to the First Party on the terms and conditions as
set forth in this agreement;
(k) NOW THIS AGREEMENT is entered by and between the parties hereto for
assessing the candidates appearing for assessment in the sectors and modules
approved by DGE&T and on the terms, conditions and stipulations as set forth
hereunder:
4. Definitions and interpretations:
Unless the context otherwise requires, the following terms whenever used in this
Contract have the following meanings:
1.1 “Applicable Law” means the laws and any other instruments having the force of law
in India for the time being.
76
1.2 “Contract/ Agreement” means the Contract signed by the Parties and all the
attached documents
1.3 “Party” means the “DGE&T” being the First Party or the “Assessing Body” being the
Second Party, as the case may be, and “Parties” means both of them.
1.4 “Effective Date” means the date on which this Contract comes into force and effect.
1.5 “Skill Development Initiative Scheme” or “SDIS” means the 100% centrally
sponsored scheme to provide skill development training and certification to workers
seeking certification of their skills acquired informally, early school drop-outs and
unemployed, workers and ITI graduates seeking skill up gradation and previously
child labour and their families.
1.6 “Vocational Training Provider” or “VTP” means an institution which provides skill
development training.
1.7 “DGE&T” means the Directorate General of Employment & Training, Ministry of
Labour and Employment
1.8 “Assessing Body” or “AB” means an institution empanelled by DGE&T to carry out
assessment of the candidates trained by VTP and candidates with prior learning.
1.9 “Regional Directorate of Apprenticeship Training” or “RDAT” means the institution
involved in implementation of SDI scheme with respect to assessment process by
assigning training batches for assessment to assessment bodies and publishing the
results of assessment.
1.10 “State Directorate” means the state department which implements SDIS on behalf
of DGE&T.
1.11 “NCVT” means National Council for Vocational Training
1.12 “Empanelment” means allowing Assessing Bodies to start conducting assessment.
1.13 “Third Party” means any person or entity other than the “DGE&T” or the “Assessing
Body”.
77
1.14 “TBN” means Training Batch Number which is a unique number given to training
batch which will be run by Vocational Training Provider.
1.15 “ABN” means Assessment Batch Number which is a unique number given to a
batch for which Assessment is scheduled.
1.16 “Assessor” means the person who is competent in carrying out competency based
assessments and administers the assessment on the behalf of the Assessing
Body
1.17 “Guidelines” means the implementation guidelines and amendments issues by
DGE&T, Ministry of Labour and Employment.
1.18 “Scheme” means Skill Development Initiative Scheme (SDIS) that is implemented
by the “First Party”.
1.19 “MES” means Modular Employability Skill modules
1.20 “Government” means the Government of India and State Government.
1.21 “In writing” means communicated in written form with proof of receipt.
1.22 “Services” means the work to be performed by the Assessing Body pursuant to this
Contract.
1.23 The following documents along with all addenda issued thereto shall be deemed to
form and be read and construed as integral parts of this Agreement and in case of
any contradiction between or among them the priority in which a document would
prevail over another would be as laid down below beginning from the highest
priority to the lowest priority:
1.23.1Guidelines issued by DGE&T on 11-9-13, 18-10-13, 19-12-13 and guidelines
which may be issued henceforth over the period of contract;
1.23.2 Assessment guidelines issued on January 2011and as amended from time to
time;
78
1.23.3 Agreement;
1.24 If any doubt arises as to the interpretation of the provisions of this Agreement or as
to matters not provided therein, the parties to this Agreement shall consult with
each other for each instance and resolve such doubts in good faith
5. ROLES AND RESPONSIBILITIES:
2.1 The First Party:
2.1.1 Shall verify the credentials of the Assessing Body which applies for empanelment.
2.1.2 Shall carry out competency evaluation of assessors of Assessing Bodies and allot
the batches for assessment directly to the assessor. In the absence of system to
allot assessment batch directly, the Second party shall identify the assessor for
carrying out assessment.
2.1.3 Shall issue assessment guidelines for the assessing bodies and assessors to
carry out assessment and report the same through online portal.
2.1.4 Shall allot funds and direct the state directorates to reimburse the assessment
cost claim on submission of documents within the time limit as prescribed by
DGE&T.
2.2 The Second Party:
2.2.1 Shall form a panel of assessors of high repute and integrity SDIS sector wise and
location wise. The assessors should have (i) Relevant academic, occupation
qualification, (ii) Understanding of factors to be considered for assessment of
competencies at various levels, (iii) Have considerable hands on experience and
occupational expertise, (iv) possess keen observation skills, (v) Be able to
communicate in local language, (vi) Knowledge of standards and forms of
assessment to be used, (vii) Be humane, kind and sympathetic.
2.2.2 Shall identify competencies required for assessment in the modules for which
provisional empanelment has been awarded.
2.2.3 Shall identify ways to measure the competencies.
79
2.2.4 Shall decide on the type of evidence that has to be collected for the modules for
which the provisional empanelment has been awarded.
2.2.5 Shall conduct assessment only in the modules under MES, sectors and states for
which approval is given by the First party.
2.2.6 Shall confirm the assessment schedule by coordinating with the assessor within
the stipulated time as prescribed by DGE&T.
2.2.7 Shall provide the attendance sheet and necessary assessment tools like question
papers, answer key, etc in advance to the assessor.
2.2.8 Shall collate the attendance sheet with the signature of the candidates and the
VTP representative, answer sheets from the assessor and upload the results in
the SDIS portal.
2.2.9 Shall maintain the records of assessments carried out like attendance sheet,
question paper and answer paper in the head office which shall be accessible for
the First party or any of its assignees for auditing as per the guidelines issued by
DGE&T.
2.2.10 Shall establish internal processes/methods to monitor, measure and improve the
performance of its internal staff and assessors during planning, execution and
reporting the assessment.
6. DELIVERABLES
3.1 The First Party:
3.1.1 Shall automate the assigning of batches for assessment to assessors directly and
ensure that batches are scheduled to the Assessing bodies based on roster.
3.1.2 Shall issue guidelines for assessing bodies, assessors, payment and processes
related to assessment.
3.1.3 Shall direct the State directorates to reimburse the cost claims for the bills
submitted by Second party within a prescribed time limit as per the guidelines.
80
3.2 The Second Party:
3.2.1 Shall ensure that the assessment schedule is confirmed within the stipulated time
as prescribed by First Party.
i.
Shall depute those assessors for assessments whose details are furnished,
qualify the competency evaluation and are approved by the First Party.
Assessment done by assessors whose details are not furnished by Assessing
Bodies in advance will be declared void and reassessment of such batch will be
done by the Assessing Bodies on their own cost.
3.2.3
Shall ensure that the assessment is carried out within 3 days of the end date of
training.
3.2.4
Shall ensure that the results are uploaded in the online portal within the
stipulated time as prescribed by First Party and photos taken by the assessors
during assessment are sent to respective RDAT through e-mail.
4. Key Terms of the agreement
4.1
Process Guidelines: The Second Party shall follow the process guidelines as
notified by the First Party from time to time for conduct of any of the activities
outlined in this section.
4.2
Selection of Assessor and Assessing body:
4.2.1 The First Party will assess the competency of the assessor from time to time and
the expenditure for the same will be borne by the Second Party. The assessors
qualified in the assessment will only be eligible for carrying out assessment.
4.2.2 The Second Party shall ensure that the assessors are qualified and competent to
carry out assessment in a particular trade for which the application is sought. The
Second Party shall depute those assessors for assessments whose details are
furnished by Assessing Bodies to DGE&T in advance. Assessment done by
assessors whose details are not furnished by Assessing Bodies in advance will be
81
declared void and reassessment of such batch will be done by the Assessing
Bodies on their own cost.
4.2.3 If the Second party wants to register a Testing center for direct assessment,
Second party shall apply online for registration to the respective state directorates
where the testing center is located. The details required for registration of Testing
centers for direct assessment would be same as that of registration of VTPs
except for the requirement of related instructional staff.
4.3
Allotment of batch for assessment:
4.3.1 The First Party will develop systems and processes to allot batches for
assessment to assessor from a particular assessing body based on roster and the
proximity to the training center.
4.3.2 The assessment will be scheduled immediately after the issue of TBN to provide
sufficient time for the assessor and assessing body to confirm the allotment of
batch.
4.3.3 The Second Party shall verify the availability of the assessor and confirm the
assessment online.
4.3.4 Second party shall enter the assessment schedule within the time limit as
prescribed in the guidelines by the First Party.
4.3.5 Assessor who is a part of Government departments/Societies/Missions/
Corporation bodies, etc related to vocational training and skill development will not
be allowed to assess the trainees trained in the centre where he/she works
4.4
Pre-assessment
4.4.1 The biometric attendance of assessors along with that of trainees/candidates will
be captured during the assessment at the start as well as end of theory and
practical test as and when the system is available.
82
4.4.2 The assessor shall verify the credentials of the candidates appearing for
assessment and check the availability of infrastructure and tools required for
assessment as prescribed in the guidelines issued by First Party.
4.5
Assessment processes
4.5.1 The question paper shall contain 80% of questions from the question bank issued
by NIMI for both theory and practical questions wherever they are available.
4.5.2 The assessor shall follow the assessment guidelines prescribed by the First Party
to ensure that objective and unbiased assessment is carried out.
4.5.3 Sufficient time shall be provided for carrying out both the theory and practical
assessment.
4.5.4 The checklists, answer sheets shall be used effectively to observe and record the
performance of the candidates during the assessment process.
4.6 Direct candidate Assessment:
4.6.1 For Direct assessment, candidates can either enroll themselves directly on the
portal or through Testing center concerned and the assessors for the direct
assessment would be assigned by the IT system as and when the system is in
place.
4.7
Post assessment process
4.7.1 The assessor shall send the attendance sheet, answer papers by courier/post to
the assessing body immediately after the completion of assessment to facilitate
the Second party to upload the results within one week of the assessment date.
4.8
Uploading of results:
4.8.1 Second party shall upload the assessment results in the portal as prescribed in
the guidelines issued by First Party.
4.9
Publishing of results and issue of certificate:
83
4.9.1 RDAT will publish the results, print and dispatch the certificates to
student/VTP/Assessing Body based on the type of candidate and the guidelines
issued by First Party.
4.10 Payment and claim generation:
4.10.1 Once the results are published, the Second party shall submit the documents to
the state directorate as prescribed by the First party for reimbursement of the
assessment fee. The payment for assessment to the assessing bodies shall be as
per the norms in guidelines issued by First Party.
5. Fraud and Corruption
5.1
Definitions: It is the First Party’s policy to require that First Party as well as
Second Party or any other party involved in the implementation of SDIS to
observe the highest standard of ethics during the execution of the Contract. In
pursuance of this policy, the First Party defines, for the purpose of this provision,
the terms set forth herein below:-
5.1.1 “Corrupt practice” means the offering, receiving, or soliciting, directly or indirectly,
of anything of value to influence the action of a public official in the selection
process or in contract execution;
5.1.2 “Fraudulent practice” means a misrepresentation or omission of facts in order to
influence a selection process or the execution of a contract;
5.1.3 “Coercive practices” means harming or threatening to harm, directly or indirectly,
persons or their property to influence their participation in a procurement process,
or affect the execution of a contract;
5.1.4 “Restrictive practice” means forming a cartel or arriving at any understanding or
arrangement among organizations with the objective of restricting or manipulating
the selection process or the execution of a contract.
84
5.2
Termination by the First Party: The First Party may terminate the agreement
with Second Party after providing a written notice, seeking explanation, after the
occurrence of any of the below events and Second Party neither responds to the
written notice issued by First Party within thirty (30) days of receipt nor remedy the
breach or any failure as observed by the First Party through the written notice to
the satisfaction of First Party, but not limited to:
5.2.1 If Second party does not comply with the guidelines issued by DGE&T with
respect to empanelment of Second Party, registration of assessors, assessment
process and any related process as mandated in the guidelines.
5.2.2 If the assessor or assessing body colludes with VTP or government officials and
carries out or reports biased and incorrect information on the assessment
5.2.3 If it is discovered at any stage that the Second party has been furnishing false
claims or providing misleading information, document, data or statement with
respect to empanelment, conduct of assessment or any other aspect related to
the program.
5.2.4 If it determines at any time that representatives of the Second Party were engaged
in corrupt, fraudulent, coercive or restrictive practices during the selection process
or during the execution of the contract, without the Second Party having taken
timely and appropriate action satisfactory to the First Party to remedy the
situation;
5.2.5 The Second Party becomes insolvent or bankrupt or enters into any agreement
with its creditors for relief of debt or take advantage of any law for the benefit of
debtors or goes into liquidation or receivership whether compulsory or voluntary;
5.2.6 The Second Party fails to comply with any final decision reached as a result of
arbitration proceedings;
5.2.7 The Second Party fails to comply to the decisions of the First Party;
85
5.2.8 The First Party may also sanction an order against the Second Party, including
declaring the Second Party ineligible/suspended, either indefinitely or for a stated
period of time, if at any time it is determined that the Second Party has, directly or
through an agent, engaged in corrupt, fraudulent, restrictive or coercive practices
in empanelment, or in executing the contract or has not taken adequate measures
to reduce the pendency of assessment schedule preparation, results uploading
within the prescribed time limit or did not comply with the guidelines issued by
DGE&T;
5.3 Termination by the Second Party: The Second Party may, by not less than thirty
(30) days’ written notice to the First Party, such notice to be given after the
occurrence of any of the events, terminate this Agreement if:
5.3.1 The First Party is in material breach of its obligations pursuant to this Agreement
and has not remedied the same within thirty (30) days (or such longer period as
the Second Party may have subsequently agreed to in writing) following the
receipt by the First Party of the Second Party ‘s notice specifying such breach;
5.3.2 The Second Party becomes insolvent or bankrupt or enters into any agreement
with its creditors for relief of debt or take advantage of any law for the benefit of
debtors or goes into liquidation or receivership whether compulsory or voluntary;
5.3.3 The First Party fails to comply with any final decision reached as a result of
arbitration.
5.4 Mutual termination: Any of the parties, in writing, may terminate the instrument in
whole, or in part, at any time before the date of expiration with a notice period of 6
weeks, after settlement of dues of all imparted services till date of termination.
5.5
De-paneling assessors of the Second Party: The First Party may de-panel the
assessor of the Second Party after providing a written notice, seeking explanation,
after the occurrence of any of the below events and Second Party neither
responds to the written notice issued by First Party within thirty (30) days of
86
receipt nor remedy the breach or any failure as observed by the First Party
through the written notice to the satisfaction of First Party, but not limited to:
5.5.1 The assessor of Second Party is found to be ineligible to carry out assessment or
submitted fake or incorrect information during the evaluation process.
5.5.2 The assessor of Second Party fails to comply to the guidelines issued by the First
Party for carrying out Assessment.
5.5.3 The assessor of Second Party is engaged in corrupt, fraudulent, restrictive or
coercive practices during the implementation of the assessment process, inclusive
of pre-assessment and post-assessment activities as detailed in the guidelines
issued by First Party
6.
IT IS MUTUALLY UNDERSTOOD AND AGREED BY AND BETWEEN THE
PARTIES THAT:
6.1 MODIFICATION: Modifications within the scope of the instrument shall be made by
mutual consent of the parties, by the issuance of a written modification, signed, and
dated by all parties, prior to any changes being performed.
6.2 INFORMATION OWNERSHIP: All information provided by The First Party shall only
be utilized for conducting assessment and The First Party holds no ownership over
the content prepared by The Second Party.
6.3 PARTICIPATION IN SIMILAR ACTIVITIES: This instrument in no way restricts
both the parties from participating in similar activities with other public or private
agencies, organizations, and individuals. However the Second Party shall inform
the First Party before participating in similar activity with other agencies, failing
which penalty as deemed fit may be imposed on the Second Party.
87
6.4 NON-FUND OBLIGATING DOCUMENT: This instrument is neither a fiscal nor a
funds obligation document.
6.5 ESTABLISHMENT OF RESPONSIBILITY: This agreement is not intended to, and
not create any right benefit or trust responsibility, substantive or procedural,
enforceable at law, by a party against The First Party or The Second Party.
6.6 COMMENCEMENT/EXPIRATION DATE: This instrument is executed as of the
date of last signature and is effective upto 2 (Two) years and will expire unless
extended.
6.7 AUTHORIZED REPRESENTATIVES: By signing below, the individuals signed in
this document as representatives of The First Party and The Second Party are
authorized to act in their respective areas for matters related to this contract.
6.8 ARBITRATION: It is agreed by both the parties that any difference of dispute arising
upon or in relation or in connection with the contract between both the parties,
which has not been settled amicably shall be referred to Sole Arbitrator to be
nominated by the First Party under the provisions of (Indian) Arbitration and
Conciliation Act, 1996 and the award so given by the Arbitrator will be wholly
binding on all the parties and shall not be questioned under any circumstances.
The parties hereto have executed this Contract as of the last written date below.
In WITNESS WHEREOF, the parties hereto have caused this agreement to be made in
English and executed by their respective duly authorized representatives of the day and
the year first above written.
88
For
For
<DGE&T>
<Name of Assessing Body>
(The First Party)
(The Second Party)
Name:
Name:
Designation:
Designation:
Date:
Date:
89
Annexure 3 - Attendance sheet
AB State Center :
Name of Assessing Body:
Assessment Batch No:
Batch type:
VTP Name:
Name of Assessor
Sector Name:
Course Name:
Assessment Date:
Assessment Time:
S.
Candidat
Candidat
Father/
Addres
Gende
Educational Dat
N
e ID
e Name
Husban
s
r
Qualificatio
e of e
n
Birt
o
d Name
Signatur
h
VTP In charge Signature
Assessor Signature
90
Annexure 4 - Pre-Assessment Checklist
Test Center :
VTP Name:
Assessment Batch No:
Batch type:
Name of Assessing Body:
Name of Assessor
Sector Name:
Course Name:
Assessment Date:
Assessment Time:
Date and time of filling checklist: <To be filled>
S.
Activity/Item
No
1
Availability
Mandatory
Compliance
requirement
(Yes/No/ Partial)
of Classroom
Infrastructure
Remarks
with
seating capacity equal
to
number
candidates
of
to
be
assessed
2
Availability
of As prescribed in the
equipments
and Module
tools
3
Availability
of
consumables
(if
applicable)
4
Verification
of Identity of all students
Total Number of
identity
of to be verified
students:
Students
students
(Identity
proof
proper
may
mark
proof:
be
sheets/
driving
license/
ration
With
identity
Identity
ascertained through
card)
other means:
Could
not
ascertain identity:
91
Annexure 5 - Results Sheet
Assessment Batch No:
Name of Assessor:
Name of Assessing Body:
VTP Name:
Sector Name:
Course Name:
Assessment Date:
Assessment Time:
Batch type:
Batch Size
S.
Candidate Candidate Date Marks
No ID
Name
Result
(Pass/Fail)
of
Birth
Practical Theory Interview Total
92
Annexure 6 - Details of Assessor
Assessment Batch No:
Name of Assessor:
Name of Assessing Body:
VTP Name:
Sector Name:
Course Name:
Assessment Date:
S.
Name of the Qualification
Experience
No Assessor
93
e-mail /mobile no.
Annexure 7 Norms for Hostel
Space and facilities
Sl No
1.
Item
Per student
2.
Mattress
Specifications
50 Sq. feet
including area of bed,
reading table and chair and Cup board/
Almirah for twin sharing
One no per bed
3.
Bed sheet
One no per bed
4.
Pillow
One no per bed
5.
Blankets/covering sheet.
One no per bed
6.
Light
7.
Fan
One tube light of 40 watt or equivalent
CFL per room
Ceiling fans
8.
Bath room
Adequate
9.
Toilet
Adequate
10. Drinking water
11. Display board
12. First Aid box
One 50 ltrs capacity water cooler with RO
facility per 16 seating capacity.
Displaying important contact names and
phone numbers, such as police, doctor,
hostel warden, fire.
Containing first aid requirements
Other requirements:
1. One regular Hostel warden with attendant.
2. Separate hostel for ladies to be provided with lady hostel warden.
3. Hygienic and nutritious Food to be served during breakfast, lunch and Dinner.
Menu for breakfast, Lunch and Dinner should be decided in consultation with
students.
94
4. Should have tie up with local hospital.
5. Hostel should as far as possible to be near the training area, if it is located at a
distance more than 1.5 Km, transport facility to be provided.
6. Adequate security of trainees to be observed.
7. Fire extinguisher of suitable size to be provided at easily approachable area.
Optional facilities:
1. If possible hostel may have attached bath rooms.
2. Play ground for students.
3. Recreation facilities for indoor games like carom, chess, and table tennis may be
provided.
4. Common Room having news papers of local language along with English
language along with TV to be provided.
95