Orders/Tech: 800-741-0015

Transcription

LENARD BROWNELL STEEL GRIP CAP
STOCK WORK INDEX
Recoil Reducers. . . . . . . . . . . . . . . 432-433
Shaping/Inletting Tools. . . . . . . . . 436-437
Checkering Supplies. . . . . . . . . . . 434-436
Stock Adjusters. . . . . . . . . . . . . . . 431-432
Fitting Jigs & Gauges. . . . . . . . . . 433-434
Stock Finishing Supplies. . . . . . . . 442-444
Grip Caps/Stock Accents . . . . . . . . 425-426
Stock Hardware. . . . . . . . . . . . . . . . . . . . 425
Recoil Pads. . . . . . . . . . . . . . . . . . . 427-431
Takedown Tools. . . . . . . . . . . . . . . . . . . 425
Brownells STOCK TAKEDOWN SET
All The Tools Needed
To Prevent Split Stocks
Brownells STOCK INSERTS
Sling
Recoil
Rem 700 ADL
Correct pin spacing, O.D. and relieved c enter for fast removal of M-98
stock cross bolts. a
b
SPECS: Tool steel. 41⁄4" (10.8cm) long x
9⁄
16" (14.3mm) diameter.
#080-098-100AK Mauser 98 Cross Bolt Wrench, 8K22A49. . . . . . . . . . . . . . . . . . . . . . . . . $ 26.99
#080-098-104AK 4 Replacement Pins for Mauser Cross
Bolt Wrench 8K05A45. . . . . . . . . . . . . . . 7.99
TALLEY
MAGNUM CROSSBOLT
Distributes Recoil; Adds A
Custom Touch
Distributes recoil on heavy magnums. Heavy-walled tube
goes inside the stock, secures between two “bolts” with specially
designed heads. With sharp, squared edges for clean inletting.
Finish to match stock contours. a
b
SPECS: Tube 1⁄4" (6.3mm) dia., 13⁄8" (3.5cm) long. Heads 7⁄16"
(11.1mm) dia., 1⁄8" (3.2mm) thick. Machined steel, in-the-white.
#874-005-000AK Magnum Crossbolt, 4G05Y83. . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.96
DAKOTA CUSTOM GRIP CAP
Insert
Brownells SHOTGUN BUTTSTOCK
BOLT BITS
No-Wedge Bits For " Drive Tools;
For Remington 870 & 1100
3⁄
8
Self-guiding, sleeved bits fit Remington 870 and 1100 buttstocks perfectly; can’t wedge between stock bolt and wood. Use
A Stockmaker’s &
Engraver’s Dream
Three custom grip
caps;
Traditional
Style “A”; Scalloped
Point “B”; and Solid “A”
“B”
“C”
“C”; all with an elegant, domed profile and beautiful, oval shape. Skeleton caps
made with a 2° draft on the inside edges for faster, cleaner inletting. The solid cap is left full thickness so it can be deeply
engraved in high relief or thinned, lightened or shaped to fit
your needs. All are made of soft, mild steel for easy s haping,
engraving. a
b
SPECS: 113⁄16" (4.6cm) x 19⁄32" (3.2cm). W/high topped 8-24 screws.
#359-102-001AK Dakota “A” Skeleton Grip Cap, 9E33B98. . . . . . . . . . . . . . . . . . . . . . . . . $ 44.99
#359-103-002AK Dakota “B” Skeleton Grip Cap, 9E33B98. . . . . . . . . . . . . . . . . . . . . . . . . . 44.99
#359-104-000AK Dakota “C” Solid Grip Cap, 9E33B98. . . . . . . . . . . . . . . . . . . . . . . . . . 44.99
with 6" long, 3⁄8" drive extension and T-handle listed below. b
a
SPECS: 870 is 3⁄4" (19.0mm) diameter x 11⁄2" (3.8cm) long. 1100 is
7⁄
5⁄
8" (22.2mm) diameter x 1 8" (4.1cm) long.
#080-870-201AK 870 Buttstock Bit 8K19B42 . . . . . . . $ 22.99
#080-187-201AK 1100 Buttstock Bit 8K18Y77. . . . . . . . 23.99
#080-027-000AK T-Handle 8K37P91. . . . . . . . . . . . . . . . . 39.99
#080-212-006AK 6" Drive Extension 8K12Y96 . . . . . . . 15.14
Rem Shotgun
Win
Shotgun/M70
Reproduction &
Universal
Models For Any
Project
P r e c i s i o n
molded
from
high-strength
polyurethane to
maintain
crisp
detail for a nice
finishing touch
Win
on custom guns
Small Rifle
or factory firearms that need
authentic looking
Starburst
Coat of Arms
restoration. OutEuropean
side edges grind
easily to provide a precise fit. Resistant to most solvents. Remington and Winchester models use the original factory patterns
so they look and feel like the vintage factory part. Winchester
models also include molded-in mounting lugs on the back side for
a solid fit. Starburst European and Coat of Arms are universal
designs that can be adapted to any stock project. a
b
SPECS: Polyurethane , black. Rem Shotgun - 1.7" (4.3cm) long x
1.4" (3.5cm) wide. Win Shotgun/M70 Rifle - 1.7" long x 1.3" (3.3cm)
wide. Win Small Rifle - 1.5" (3.8cm) long x 1.2" (3.1cm) wide. Starburst European - 1.6" (4.1cm) long x 1.1" (2.9cm) wide. Coat Of
Arms - 1.7" long x 1.2" wide.
#100-003-868AK Rem Shotgun Cap 8B07A69. . . . . . . . $ 9.99
#100-003-869AK Win Shotgun/M70 Rifle Cap, 8B07A69. . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99
#100-003-870AK Win Small Rifle Cap, 8B07A49. . . . . . . . . . . . . . . . . . . . . . . . . . . 9.95
#100-003-871AK Starburst European Cap, 8B07A69. . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99
#100-003-872AK Coat Of Arms Cap 8B07A49. . . . . . . . . 9.95
SUNNY HILL SKELETON GRIP CAP
Provides A Hand Crafted,
Custom Look To Any Rifle
Traditional style, skeleton grip cap creates the
perfect contrast between wood and metal for a
professional, exhibition grade appearance. Outer
edge is machined to form a stepped contour that
provides a shadow-line appearance. Inner edge
contains a slight convex curve for faster, cleaner
inletting. Includes high-top screws that can be crowned or fitted
flush with the cap surface. a
b
SPECS: Chrome moly, in-the-white. 1.8" (4.6cm) long x 1.3" (3.3cm)
wide. 5⁄32" (4.1mm) thick.
#848-000-006AK Skeleton Grip Cap 8D34C95 . . . . . . $ 39.99
order on the web
www.brownells.com
DRESSEL ENGLISH-STYLE - Machined from
solid stock in sizes proportioned in length,
width and height to look right and compliment any size rifle or shotgun. Includes screw
with oversized, tapered head. a
b
SPECS: Machined steel, in-the-white, satin
finish. Available in Large; 1.85" (4.6cm) X
1.43" (3.6cm), Standard; 1.78" (4.5cm) X 1.36"
(3.4cm), Small; 1.71" (4.3cm) X 1.29" (3.2cm), Petite; 1.65" (4.1cm)
X 1.22" (3.1cm).
#258-100-007AK Large Grip Cap, 8E25B00. . . . . . . . . . . . . . . . . . . . . . . . . $ 31.00
#258-100-005AK Standard Grip Cap, 8E25B00. . . . . . . . . . . . . . . . . . . . . . . . . . . 31.00
#258-100-003AK Small Grip Cap, 8E25B00. . . . . . . . . . . . . . . . . . . . . . . . . . . 31.00
#258-100-001AK Petite Grip Cap 8E25B00. . . . . . . . . . . 31.00
FOREND TIP/GRIP CAP SETS
Gorgeous Walnut And Redwood - Guaranteed To Please
REDWOOD BURL: Swirling, deep red, birdseye burl. Set includes 2 pieces. a
b
SPECS: Approximate; sizes vary considerably: Large - 27⁄8" (7.3cm) x 17⁄8" (4.8cm) x
115⁄16" (23.8mm); Small - 21⁄8" (5.4cm) x 111⁄16"
(17.5mm) x 7⁄16" (11.1mm).
#461-100-001AK Redwood Tip/Grip Cap Set, 1F00VBX . . . . . . . . . . . . . . . . . . . . . . . . $ 20.82
CALIFORNIA ENGLISH WALNUT: Beautiful, highly colored and figured, circassiantype, fancy grade with contrasting figures
and marbling. Set includes 2 pieces. a
b
SPECS: Approximate; sizes vary consider1
1
ably: Large - 2 ⁄8" (5.4cm) x 2 ⁄4" (5.7cm) x 31⁄2"
(9cm). Small - 11⁄16" (17.5cm) x 21⁄2" (6.3cm) x
33⁄8" (8.6cm).
#461-100-005AK English Walnut Tip/Cap Set, 1F00YTP. . . . . . . . . . . . . . . . . . . . . . . . . $ 20.82
BILLINGSLY & BROWNELL
MANNLICHER NOSE CAP
Classic Accent For Mannlicher Stocks
The crowning touch on any Mannlicher stock.
Designed by Lenard Brownell. Made from top quality steel.
Unpolished. Attaching screw and nut furnished. a
b
SPECS: Barrel opening is .640" (16.2mm) dia. (approximate). Over3⁄
all, .915" (23.2mm) high; .850" (21.6mm) long, 4 oz. (21 g) weight.
#095-004-001AK Mannlicher Nose Cap, 5K17T83. . . . . . . . . . . . . . . . . . . . . . . . . $ 18.49
– 4 or More – M
annlicher Nose Cap, per each, 5K14T73. . . . . . . . . . . . . . . . . . . . . . . . . . . 17.00
BROWNELLS
. . . ONLY THE BEST . . . 425
PAGE grip caps/stock accents
CNC machined, threaded Stud
Pad
Triggerguard
brass bushings provide
added strength and security for screwing down sling studs, recoil pads, and triggerguards in wood, composite, and fiberglass
stocks. Lets you turn a screw in tight without the worry of stripping it out of the stock material. Heavily knurled on the outside
to hold plenty of epoxy bedding for a rock-solid grip between
the insert and stock. Kits available for mounting sling studs,
recoil pads, and Remington ADL triggerguards, plus a 10-pak of
general use inserts. a
b
SPECS: Brass, knurled. ½" (12.7mm) long x 5⁄16" (7.9mm) diameter.
All inserts have 10-32 tpi internal threads. Sling Stud Inserts - (2)
inserts, (2) steel, dome-top sling studs, matte blued. Recoil Pad
Inserts - (2) inserts, (2) ¾" (19mm) long stainless steel, roundhead
screws, natural finish. Rem 700 ADL Insert - (1) insert, (1) steel,
flathead screw, matte blued. Replaces front screw on Remington
700 ADL triggerguard. Inserts - (10) 10-32 tpi threaded inserts.
#080-000-682AK Sling Stud Inserts, 2-pak 5D05V56. . $ 6.95
#080-000-683AK Recoil Pad Inserts, 2-pak 5D04V88. . . 5.95
#080-000-684AK Rem 700 ADL Insert 5D03V16. . . . . . . 3.95
#080-000-685AK Inserts, 10-pak 5D23V96 . . . . . . . . . . . 29.95
N.C. ORDNANCE GRIP CAPS
stock hardware
Secure Mounting Of Sling
Studs, Recoil Pads &
Triggerguards In Wood Or
Synthetic Stocks
MAUSER 98 CROSS BOLT WRENCH
Fits M-98, 2-Pin, Cross Bolt Nut
JERRY FISHER 2-SCREW - Two-screw design leaves the center area open for embellishments that won’t work with singlescrew caps. Counterbored holes ensure
positive screw seating. a
b
SPECS: Steel, machined from bar stock. 1⁄4" (6.3cm) thick. 15⁄16"
25⁄
(3.3cm) wide. 1 32" (4.5cm) long. In-the-white.
#310-300-002AK 2-Screw Grip Cap 1C26P17 . . . . . . . $ 32.51
takedown tools
The very best possible tools
for removing most styles of buttstock bolts and action spring
tube nuts. The thin-walled sockets are correct to prevent slipping and burring. The drag-link
bit is round at the drive end, which automatically centers the blade in the stock
bolt hole and makes fitting it into the slot
about 1,000 times easier!! Plus, they work
for other shop jobs, too. a
b
SPECS: Set - Includes T-handle, 9" (22.9cm) drive extension, (5)
3⁄
"
(9.5mm)
drive
sockets,
and
drag
link
bit.
Sockets
& Drag Link
8
- Includes all (5) drive sockets and drag link bit.
#080-809-000AK Stock Takedown Set 8K86Y37. . . . $ 107.99
#080-027-000AK T-Handle, only 8K37P91. . . . . . . . . . . . 39.99
#080-212-010AK 9" Extension, only 8K19Y53. . . . . . . . . 24.99
#080-212-006AK 6" Extension, only 8K12Y96. . . . . . . . . 15.14
#080-809-001AK Sockets & Drag Link, only 8K37Y42. 46.95
Brownells
Lenard Brownell designed this
continental style steel grip cap to
satisfy his own need for a quality grip cap that would look like
it “belonged” on his superb custom rifles. Now available to the
trade, this beautiful cap is 8620 steel, which blues, engraves and
color casehardens very well. It is investment cast rather than
stamped to give a better distribution of material and make a
sturdy cap with even, well defined contours and perfect steps.
The kind of grip cap you can install with pride. Classic styling
will compliment any rifle whether it be a fancy, engraved work
of art, or a first rate hunting rifle. a
b
SPECS: 15⁄16" (3.3cm) x 113⁄16" (4.6cm). Weighs 1 oz. (28 g). Furnished unpolished, in-the-white, with full-length-threaded screw.
#095-003-001AK Unpolished L. Brownell Grip Cap, each,
5K10T00. . . . . . . . . . . . . . . . . . . . . . . . $ 10.99
— 4 or More — Unpolished L. Brownell Grip Cap,
per each 5K08T43. . . . . . . . . . . . . . . . . . . 10.00
#095-003-002AK Extra Screw For Grip Cap, 5K03T20. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.99
MISCELLANEOUS GRIP CAPS
JERRY FISHER - Finish-ground top and
gracefully rounded contours. Screw
fits precisely into cap, and bottoms on
shoulder. Takes engraving well. a
b
SPECS: Steel, in-the-white, satin finish. Small - 1.7" (4.3cm) L x 1.23"
(3.1cm) W. Medium - 1.75" (4.4cm) L x 1.27" (3.2cm) W. Large - 1.8"
(4.5cm) L x 1.31" (3.3cm) W.
#310-301-001AK Small Fisher Grip Cap, 1C26P17. . . . . . . . . . . . . . . . . . . . . . . . . $ 32.51
#310-301-002AK Medium Fisher Grip Cap, 1C26P17. . . . . . . . . . . . . . . . . . . . . . . . . . 32.51
#310-301-003AK Large Fisher Grip Cap, 1C26P17. . . . . . . . . . . . . . . . . . . . . . . . . . 32.51
STOCK WORK
Bedding Supplies . . . . . . . . . . . . . 437-442
Buttplates. . . . . . . . . . . . . . . . . . . . . 426-427
Designed By The
Old Master Himself
GALAZAN
STOCK WORK
STOCK OVAL & SHIELD
Ready For Inletting
& Engraving
Give your customers that
touch of personal distinction. Allmetal shield and ovals are precontoured and engrave easily.
Includes rear pins for a secure glue or epoxy joint.
SPECS: Nickel silver (NS) or 10K solid gold (SG).
STOCK #
SHAPE FINISH SIZE (WxH)
PRICE
3
⁄4" x 1"
#344-130-001AK Oval
NS
4D22C99 $ 24.99
9⁄
3
#344-130-002AK Shield NS
16" x ⁄4"
4D22C99 $ 24.99
5⁄
15⁄
#344-130-101AK Oval
SG
8" x
16"
4D299C99 $ 334.99
KICK-EEZ SLICK-EEZ
buttplates
Makes Recoil Pads Slick & Grab-Free
One application makes your rubber
recoil pad “super-slick” for faster gun
mounting; completely eliminates clothing “hang-up”. Goes on easily; dries to a
friction-free, clear film that won’t peel or
crack. Can be used on any rubber recoil
pad (except Terminator brand). a
b
SPECS: Kit includes Cleaner, 2 fl. oz. (59 ml),
Pad Treatment, 1 fl. oz. (30 ml) and instructions.
#440-700-000AK Slick-Eez Kit 4D19Z67. . . . . . . . . . . . $ 29.99
ALLAN FOUNDRY LEVER ACTION
ORIGINAL STYLE BUTTPLATE
Classic Shape & Look
For Restoration Or New
Reproduced from original factory designs to look right when restoring an older gun or building a custom rifle. Curved,
cast steel buttplate comes in-the-white,
ready for final fitting and bluing. Marlin
Lever Action/Winchester 1886 Hi-Wall
models require drilling and counterboring screw holes. Universal model with
pointed heel, similar to Neidner style,
features counterbored screw holes for a
flush-fit of installation screws. Mounting screws not included. b
a
SPECS: Steel. In-the-white. Marlin/Winchester - 4½" (11.6cm)
long, 15⁄16" (3.3cm) wide. Universal - 53⁄16" (13.2cm) long x 15⁄8"
(4.1cm) wide.
#011-002-100AK Marlin Buttplate 1A22Y41. . . . . . . . $ 27.99
#011-002-101AK Winchester Buttplate 1A22Y41. . . . . . 27.99
#011-000-001AK Universal Buttplate, 1A21V99. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
Brownells NEIDNER
BUTT PLATE & GRIP CAP
grip caps/stock accents
Checkered Steel Adds The Hallmark Of Quality
Now back in production, the classic Neidner-style,
checkered steel butt plates and grip caps give a secure, no-slip surface, plus that touch of traditional
elegance. Curved butt plate with pointed heel tip is
functional and comfortable. Single-screw grip cap is
smooth on the outside edge with
raised, checkered oval in the center. Screws included. a
b
SPECS: Steel, blued, checkered.
1⁄
Butt Plate; 5 16" (12.8cm) x 11⁄2"
(3.8cm). 3" (7.6cm) c-to-c hole spacing. Grip Cap; 113⁄16" (4.6cm) x 15⁄16" (3.3cm).
#078-010-100AK Checkered Butt Plate, 8D28X00. . . . . . . . . . . . . . . . . . . . . . . . . $ 34.99
#078-010-110AK Checkered Grip Cap 8D19X49 . . . . . 24.99
B
ROWNELLS
. . . ONLY THE BEST . . .
426
PAGE Brownells UNIVERSAL BUTTPLATE
Replaces Chipped Or Broken Factory Buttplates;
Preserves Original Appearance
Speed up the restoration of that classic shotgun
or rifle by replacing a worn, chipped, or cracked
buttplate with an affordable, grind-to-fit replacement of moldable polyurethane resin. Durable
resin looks and feels like the hard rubber, Bakelite,
or black plastic used for the original buttplates on
many of these guns, and will not shrink, swell, or crack over time.
Proprietary molding process uses the highest-quality molds
engineered to prevent unsightly “flash” and air bubbles on the
finished product. Grinds easily without flaking or fracturing.
Includes fine-line, horizontal serrations often found on period
buttplates, but without the tricky borders that make grinding
the sides difficult. Heat briefly in boiling water or microwave to
soften the resin so it can be molded to the contour of your stock;
the shape sets up well once cooled and is extremely durable.
Drilled and counterbored to accept two #12 buttplate screws,
available separately. b
a
SPECS: Molded polyurethane resin, black. Fitting required. Small
- 4¾" (12.1cm) long, 1½" (3.8cm) wide. 215⁄16" (7.5cm) hole spacing.
Medium - 5" (12.7cm) long, 15⁄8" (4.1cm) wide. 215⁄16" hole spacing.
Large - 17⁄8" (4.8cm) wide, 57⁄16" (13.8cm). 3" (7.6cm) hole spacing.
#080-003-975AK Universal Buttplate, Small, 2D11U49. . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
#080-003-976AK Universal Buttplate, Medium, 2D11U49. . . . . . . . . . . . . . . . . . . . . . . . . . 14.95
#080-003-977AK Universal Buttplate, Large, 2D11U49. . . . . . . . . . . . . . . . . . . . . . . . . . 14.95
#080-000-260AK #12 Buttplate Screws, per doz., 8K06V26. . . . . . . . . . . . . . . . . . . . . . . . . . . 10.99
FULTON ARMORY M1 GARAND
BUTTPLATE
Replaces A Dinged-Up Plate
To Restore Stock’s Appearance
Steel buttplate made to USGI specs is a direct replacement part for the dinged-up original on your
rifle. Checkering replicates the original military
pattern for an authentic look and feel. Features a
spring-loaded trap door just like the original for
easy access to cleaning kit and rods.
SPECS: Carbon steel, Parkerized, matte black finish.
Approximately 5" (12.7cm) long, 17⁄8" (7.76cm) wide, 3⁄8" (.95cm)
thick. Mounting screws not included.
#100-005-285AK Garand Buttplate 3K25V71. . . . . . . $ 29.99
MCFARLAND TRADITIONAL STEEL BUTTPLATE
A Beautiful, Classic Touch
For Custom Rifles
Graceful contour with a slight curve adds an unmistakable touch of class to any rifle. Perfect for engraving, checkering or just leave plain. Blues or case
hardens beautifully. All edges have slight draft for
precise fitting. Skeleton models have open centers
and rounded attaching point contours that outline
the stock to show beauty of the wood. Solid models
provides wonderful area for checkering and engraving. English Style has traditional, pointed heel tip. b
a
SPECS: Mild steel, in-the-white. 5" (12.7cm) long, 15⁄8" (4.1cm)
wide, .100" (2.5cm) thick. Supplied with flat top, 8-24 screws.
#597-000-001AK Skeleton Buttplate 7E100Y00. . . . $ 125.00
#597-000-002AK Solid Buttplate, 7E70Y00. . . . . . . . . . . . . . . . . . . . . . . . . . . 87.50
#597-000-003AK English Style Skeleton Buttplate, 7E100Y00. . . . . . . . . . . . . . . . . . . . . . . . 125.00
#597-000-004AK English Style Solid Buttplate, 7E70Y00. . . . . . . . . . . . . . . . . . . . . . . . . . . 87.50
N.C. ORDNANCE
100 STRAIGHT
REPRODUCTION BUTTPLATES
POLYMER BUTTSTOCK SPACER
Reproductions Of The Factory Originals
Great Looking Spacers;
Easy To Fit, Grind & Finish
High-quality, detailed reproduction buttplates
look and feel like the originals and make restoring
an old rifle or shotgun easy work. Built using original
factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect
match. Outside edges grind easily for a perfect fit.
Molded from a special, high-strength polyurethane
that’s resistant to most solvents. a
b
SPECS: Polyurethane, black.
RIFLE BUTTPLATES
STOCK #
STYLE
DIMENSIONS
#100-003-886AK Rem-UMC M10
(5" x 1.7")
#100-003-885AK Rem-UMC M12/141
(4.3" x 1.2")
#100-003-887AK Rem. M512/550
(4.7" x 1.5")
#100-003-888AK Savage M99 Trademark
(4.6" x 1.4")
#100-003-883AK Stevens Favorite
(4.2" x 1.3")
#100-003-878AK Win. 1894 Pre-64
(4.8" x 1.6")
#100-003-876AK Win. 1906
(4.1" x 1.1")
#100-003-877AK Win. M61/67/69/72/1910
(4.75" x 1.5")
#100-003-879AK Win. M70/88/100
(5.1" x 1.6")
– Advise # – Rifle Buttplate 8B11A49 . . . . . . . . . . . . . $ 14.95
SHOTGUN BUTTPLATES
STOCK #
STYLE
DIMENSIONS
(5.2" x 1.75")
#100-003-889AK Browning Auto-5
#100-003-890AK Browning Superposed 12 Ga. (5.3" x 1.75")
#100-003-891AK Browning Superposed 20 Ga. (5.4" x 1.6")
(4.9" x 1.5") #100-003-892AK Ithaca M37
#100-003-880AK L.C. Smith 12 Ga.
(5" x 1.7")
(4.8" x 1.5")
#100-003-881AK L.C. Smith 16-20 Ga.
#100-003-882AK L.C. Smith Oversized
(5.5" x 1.9")
(5" x 1.7") #100-003-884AK Rem. M11
#100-003-873AK Win. 1897
(5.2" x 1.7")
#100-003-874AK Win. M12/12 Ga.
(5.1" x 1.5")
(4.9" x 1.6")
#100-003-875AK Win. M12/16-20 Ga.
– Advise # – Shotgun Buttplate 8B11A49. . . . . . . . . . $ 14.95
OHIO RIFLE COMPANY WINCHESTER
BRASS BUTTPLATE
Checkered Brass Dresses Up Your Rifle
Dress up that 1950’s vintage Winchester
lever rifle with these checkered buttplates
available in gunmetal grey to match original
receiver finish or natural brass for a distinctive look. Precision machined checkering
provides a positive grip on your shoulder
without slipping. Constructed from soft
brass for easy shaping and fitting to the buttstock, plus easily
bends to match curved buttstocks. Will not rust, break or shrink
over time. a
b
SPECS: Brass, gunmetal gray or natural finish. Adapts to fit other
guns. 5¼" (13.3cm) long, 1¾" (4.4cm) wide, 1⁄8" (3.1mm) thick.
#100-003-530AK Antique Brass 7B21H33 . . . . . . . . . . $ 26.99
#100-003-532AK Gunmetal Gray 7B21H33. . . . . . . . . . 26.99
TREEBONE CARVING
CLASSIC BUTTPLATE
Jet black or bright white, buttstock spacers made
from strong, lightweight, polymer plastic for superior sanding and machining characteristics. Slotted
hole design makes it easy to match up with just
about any hole location. The wide range of thicknesses available let you use them alone or in combination to adjust rifle or shotgun stocks for length
of pull, or to add a decorative and finishing touch
to the stock. a
b
SPECS: Black or white polymer plastic. 23⁄16" (5.5cm) wide, 57⁄8"
(14.9cm) long. 23⁄4" (6.9cm) minimum c-to-c hole spacing with 1⁄2"
adjustment. 1⁄8" (3.17mm) 1⁄4" (6.35mm) and 1⁄2" (12.7mm) thick.
#365-100-125AK 1⁄8" Black Polymer Spacer, 5F06X49. . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99
#365-100-250AK 1⁄4" Black Polymer Spacer, 5F06X99. . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99
#365-100-500AK 1⁄2" Black Polymer Spacer 5F09X99 . . 11.99
#365-101-125AK 1⁄8" White Polymer Spacer 5F06X29. . 9.99
#365-101-250AK 1⁄4" White Polymer Spacer 5F06X29. . 9.99
100 STRAIGHT
PITCH BUTTSTOCK SPACER
Adjust Pull & Pitch Without Cutting The Stock
Tapered design allows for negative or positive
adjustments in stock pitch without altering the
stock; adjusts length of pull. Sands and finishes
beautifully. Slotted holes for universal fit. a
b
SPECS: Black polymer plastic. 23⁄16" (5.5cm) wide.
57⁄8" (15cm) long, 23⁄4" (6.9cm) minimum c-to-c
hole spacing. Tapers - 1⁄4" (6.3mm) to 1⁄16" (1.59mm)
positive and negative, 1⁄2" (12.5mm) to 1⁄8" (1.5mm)
positive and negative. Positive is thicker at top or
heel and will increase pitch. Negative is thicker at toe and will decrease pitch. Kit contains one each of all four tapers.
STOCK # POS.
STOCK # NEG. TAPER
PRICE
#365-114-125AK #365-114-025AK ¼"-1⁄16" 5F07X49 $ 9.99
#365-112-150AK #365-112-050AK ½"-1⁄8" 5F11X15 $ 12.99
#365-112-000AK Pitch Buttstock Spacer Kit, 5F36X51. . . . . . . . . . . . . . . . . . . . . . . . . $ 43.99
ALL SPORT TECH BENELLI
GEL PAD REPLACEMENT KIT
Install New Or Aftermarket Recoil Pads;
Shorten Or Lengthen Your Benelli Stock
Don’t get stuck with just one choice in recoil pads. With this pre-shaped, threaded
aluminum insert you can remove the factory gel pad from your Benelli Comfort-Tech
stock and replace it with any recoil pad. Plus,
you can shorten or lengthen your stock’s
length-of-pull, change the pitch, or easily
install recoil reducers inside the stock. Very
simple to install; basic installation requires
no alterations to your factory stock. b
a
SPECS: Polished aluminum, 41⁄2" (11.4cm) long, 13⁄8" (3.4cm) wide,
1⁄
8" (3mm) thick. Includes screws and instructions. Fits Benelli Super
Black Eagle, M2, and SS models with synthetic, Comfort-Tec stock.
#100-002-486AK Benelli Gel Pad Replacement Kit, 4A18P00. . . . . . . . . . . . . . . . . . . . . . . . . $ 25.00
Traditional Style Adds A Touch Of Quality
Classic, pre-war American pattern derived from various Winchester and Sharps models. Slightly curved
face with pointed heel tip and 18 lpi checkering. a
b
SPECS: Investment cast 4140 steel, in-the-white. 5"
(12.7cm) long, 1.62" (4.1cm) wide.
#507-000-001AK Model 70 Classic Buttplate, 7K44Y00. . . . . . . . . . . . . . . . . $ 55.00
SATISFACTION GUARANTEED
SINCE 1939
NO HANDLING CHARGE • NO MINIMUM ORDER
ONE-RATE SHIPPING ANYWHERE IN THE U.S.
100% SATISFACTION GUARANTEED!
Office/Tech: 641-623-5401
PACHMAYR SPACER
KICK-EEZ BRAUER LEATHER LACE-ON RECOIL PAD
When “Just A Touch More” Is Needed
Adjust Stock Fit Without Cutting Stock
BLACK - Hard black rubber. NO
white stripe. a
b
SPECS: 53⁄4" (19.6cm) x 2" (5cm) x 3⁄16"
(4.76mm).
#692-920-002AK BSD-20 Black Spacer, 2F05P84. . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.99
Tapered spacers provide positive or negative pitch
angle. Easily finished polymer material blends well
with stocks and recoil pads. Pre-drilled, oblong slot
adapts to most hole spacings. a
b
SPECS: Black polymer. 2.2" (5.6cm) wide. 5.8"
1
(14.7cm) long. Tapers ⁄4" (6.3mm) to 1⁄16" (1.59mm)
and 1⁄2" (12.7mm) to 1⁄16" (1.59mm).
#440-105-003AK ¼" Buttstock Pitch Spacer, 4D05Z22. . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.39
#440-105-002AK ½" Buttstock Pitch Spacer, 4D09Z17. . . . . . . . . . . . . . . . . . . . . . . . . . 12.99
KICK-EEZ BUTTSTOCK SPACER
Easy Fit & Finish With Traditional Appearance
N.E.C.G. HARD RUBBER BUTTSTOCK SPACER
Traditional, Jet Black;
Easy-To-Grind
SWISS PRODUCTS SCHMIDT-RUBIN K31
RECOIL PAD ADAPTER
Allows Mounting Recoil Pads On Military Stocks
For Improved Fit & Comfort
Easy-to-install adapter allows you to mount a
modern recoil pad on original-issue, wooden military
stocks for improved fit and shooting comfort. Matches
the irregular shape of the military buttstock on one
side, with the other side perfectly flat to accept a
conventional recoil pad. Does not require cutting or
altering the original stock. Built from a high-grade
polymer that easily grinds and sands to shape for
a professional fit. Fits between buttstock and recoil
pad; uses the same wood screws as the recoil pad for installation.
Requires drilling screw holes in adapter to match hole spacing
on recoil pad. Does not include recoil pad. a
b
SPECS: Polymer, matte black. 5" (12.7cm) long, 15⁄8" (4.1cm) wide,
5⁄
16" (7.8mm) thick.
#100-004-126AK Recoil Pad Adapter, 7K15A00. . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99
Soft, Synthetic “Rubber”
Absorbs Recoil Energy
Reduces Felt Recoil & Pain
Soft, synthetic elastomer with outstanding energy absorption soaks up
recoil energy to help eliminate felt recoil and pain. Unique, synthetic “rubber” has an ultrasoft, Shore A scale
rating of 18 but it won’t crack, tear
or split and is completely unaffected by temperature changes.
Hard, flat, black, polymer base and pad are easy to grind and
finish. Internal steel washers allow grinding to fit all sizes of
stocks. All dimensions are nominal. a
b
SPECS: Synthetic rubber, black, available wit flat leather face. 21⁄16"
(5.2cm) wide, 515⁄16" (15cm) long. Available in 5⁄8", 3⁄4" and 11⁄8" thicknesses. Includes mounting screws and instructions.
#365-511-106AK Terminator Pad, 1⁄8", 5F36P51. . . . . . . . . . . . . . . . . . . . . . . . . $ 43.99
#365-511-107AK Terminator Pad, ¾", 5F36P51. . . . . . . . . . . . . . . . . . . . . . . . . . 43.99
#365-511-118AK Terminator Pad, 11⁄8", 5F36P51. . . . . . . . . . . . . . . . . . . . . . . . . . 43.99
BEARTOOTH SLIP ON RECOIL PAD &
COMB-RAISING KITS
Reduce Felt Recoil
Without Altering Stock;
Change Cheek Rest
Height
Rubber backed, neoprene pad kit adds additional protection for your
shoulder without modification to the gun. Combraising kit converts your
stock to a Monte Carlostyle without permanent alterations. Foam inserts come in five
sizes for a fully adjustable comb height.
SPECS: Recoil Pad: Neoprene pad. Black (BL), brown (BR),
or Mossy Oak (MO). 3.75" (9.5cm) long, 1.75" (4.4cm) wide, 5"
(12.7cm) high; foam inserts of 1⁄4" (6.3mm), 3⁄8" (9.5mm), 1⁄2"
(12.7mm) and 5⁄8" (15.8mm). Comb-Raising Kit: Neoprene pad.
Black (BL), brown (BR), or Mossy Oak (MO). 9" (22.8cm) long; foam
inserts of 1⁄8" (3.1mm), 1⁄4" (6.3mm), 3⁄8" (9.5mm), 1⁄2" (12.7mm) and
5⁄
8" (15.8mm) thick.
SLIP ON RECOIL PAD COMB RAISING KIT
COLOR
#100-001-895AK
#100-001-892AK
BL
#100-001-896AK
#100-001-893AK
BR
NA
#100-001-894AK
MO
– Advise # – Slip On Recoil Pad 6A10H62 . . . . . . . . . $ 18.95
– Advise # – Comb Raising Kit, (BL & BR), 6A13H34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.95
– Advise # – Comb Raising Kit, (MO) 6A13H78. . . . . . 22.95
GALAZAN FACTORY LOGO RECOIL PAD
The Final Detail
For An Accurate Restoration
Makes your restorations as accurate and
valuable as possible. These rubber pads are
exact reproductions of those used in the early
1900’s. The Hawkins was a commonly-used,
turn of the century, aftermarket pad. This
faithful re-creation has the original Hawkins
logo in the center and is available with the
original diamond/heart pattern vents or
horizontal square vents. The Winchester Vented is a copy of the
original pad on early 1920’s Winchesters the includes the Winchester logo and the legend “MADE IN U.S.A.” above the logo
and “TRADE MARK PAT. JUNE 6, 1922” correctly placed below
it. Winchester Solid is a red pad modeled after that of many
original pre-’64 Winchesters including the Model 70, Model 12,
Model 21, plus all lever action and pump models. Raised lettering
Winchester logo. The Jostam pad was common on Parker, Fox,
L.C. Smith, Remington, Winchester, and Lefever guns. Raised
lettering reads “JOSTAM MFG. CO.” with the legend “HY-GUN
RECOIL PAD” below the logo followed by “PATENTED” with
the following dates listed “DEC. 28, 1914, OCT. 12, 1915, SEP. 20,
1927.” Early Noshoc pad provides an opportunity to put the correct era pad on many high-grade American guns. Used by Parker,
Fox, L.C. Smith, Remington, Winchester, and Lefever. Raised lettering reads “NOSHOC” with the legend “PATENTED JUNE 6,
1922” above the logo and “MADE IN U.S.A” below it. The Universal pad is available in red or tan and works well on a variety of
custom stocks. Screw holes are 3¼" apart; midway between these
holes is an internal cavity ¾" wide and 21⁄8" long.
SPECS: Rubber. Red pad with black base. Universal also available
with tan pad. Hawkins - 6" (15.2cm) long, 1.98" (5cm) wide, 11⁄8"
(2.8cm) thick in center, 3¼" (8.2cm) center- to-center hole spacing.
Jostam - 515⁄16" (15.2cm) long, 1.98" (5cm) wide, 1" (2.8cm) thick in
center, 3¼" (8.2cm) c-to-c hole spacing. Noshoc - 511⁄32" (13.7cm)
long, 1.75" (4.4cm) wide, .9" (2.3cm) thick in center, 3" (7.6cm) c-to-c
hole spacing. Winchester Vented #1 - 5.025" long, 1.695" (4.8cm)
wide, .9" (23.5mm) thick in center. 3.08" (7.8 cm) c-to-c hole spacing.
Winchester Vented #2 - 5.5" long, 1.86" wide .940" thick in center,
31⁄16" (7.7cm) c-to-c hole spacing. Universal - 5½" (14.9cm) long, 1.9"
(4.8cm) wide, ½" (1.3cm) or ¾" (1.9cm) thick in center. 3¼" (8.2cm)
c-to-c hole spacing.
#344-100-009AK Hawkins Recoil Pad, Square Vent, 4D26C80. . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
#344-000-010AK Hawkins Recoil Pad, Diamond Vent, 4D23C81. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
#344-000-011AK Jostam Recoil Pad 4D31C75 . . . . . . . 39.99
#344-000-012AK Noshoc Recoil Pad 4D23C81. . . . . . . 29.99
#344-000-014AK Winchester Recoil Pad, Vented, 4D31C75. . . . . . . . . . . . . . . . . . . . . . . . . . 39.99
#978-100-001AK Winchester Recoil Pad, Solid, 4D37V57. . . . . . . . . . . . . . . . . . . . . . . . . . . 41.99
#344-000-013AK Universal Recoil Pad, ½" Red, 4D15C63. . . . . . . . . . . . . . . . . . . . . . . . . . . 19.99
#344-000-015AK Universal Recoil Pad, ½" Tan, 4D15C94. . . . . . . . . . . . . . . . . . . . . . . . . . . 19.99
#344-000-016AK Universal Recoil Pad, ¾" Red, 4D15C94. . . . . . . . . . . . . . . . . . . . . . . . . . . 19.99
order on the web
www.brownells.com
Space-Age Neoprene Elastomer
Cushions Painful Recoil
Ultra-soft, space-age, polymerized, synthetic
rubber pad cushions painful recoil and saves your
shoulder. Polymer base plate flexes slightly to resist
cracking and to fit less-than-perfect stocks.
EZG PRE-SIZED RECOIL PADS - Drop-on, pre-sized
pads install easily on your rifle or shotgun.
SPECS: Neoprene-elastomer pad, polymer base
plate, includes (2) screws. Models for hollow butt,
synthetic stocks include an insert to fill the hollow ar- Rem. 700
ea. Pad shown is 5.25" (14.34cm) tall, 1.625" (4.13cm) ADL/BDL
wide, 1" (2.54cm) thick. *These pads do not come with Standard
Shown
an insert as none is required.
BLACK STK #
FITS
#408-000-009AK
Rem. 700 BDL/ADL, Standard
#408-000-010AK
Rem. 700 BDL/ADL, Synthetic
#408-000-011AK
Rem. 870, 1100, 11-87, Wood
#408-000-012AK*
Rem. 870 & 11-87 , Synthetic
#408-000-015AK
Ruger Model 77 MK II, Wood
#408-000-027AK*
Savage 110, Synthetic
– Advise # – EZG Pre-Sized Recoil Pads, 8K22V51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99
EZG GRIND RECOIL PADS - Customizable pads
grind cleanly; oversized for the perfect fit on
your rifle or shotgun.
SPECS: Small - 5.3" (13.46cm) tall, 1.68" (4.27cm)
wide, 1" (2.54cm) thick. Medium - 5.5" (14cm) tall, Large
1.8" (4.6 cm) wide, 1" (2.54 cm) thick. Large - 5.7"
Pad
(14.79cm) tall, 2" (5.08cm) wide, 1" 2.54 cm) thick. Shown
Small, Medium, Large include (2) screws each.
Gunsmith fitting required.
BLACK STK #
BROWN STK #
SIZE
#408-000-047AK
#408-000-050AK
Small
#408-000-048AK
#408-000-051AK
Medium
#408-000-052AK
Large
#408-000-049AK
– Advise # – EZG Grind Recoil Pads 8K24V15 . . . . . $ 25.99
HIVIZ XCOIL® RECOIL PAD
Two Styles
Tame Hard Kicking Rifles & Shotguns
Soft, composite material spreads and absorbs recoil to turn the bone-jarring kick of powerful rifles
and shotguns into a soft push. Helps prevent recoilfatigue from hurting you and your score during extended sessions of load testing or Trap and Skeet.
Textured finish resists slipping. Sporting Pad has
a radiused heel to reduce clothing grab when shouldering your gun. Universal Pad fits most rifles and
shotguns. a
b
SPECS: Synthetic rubber-like compound, Black. 1" (2.5cm) thick.
Can be ground and fit like conventional pads; use 60 grit belt/disc.
Includes screws and plugs. Small – 1.89" (4.8cm) x 5.1" (13cm).
Medium - 1.85" (4.7cm) x 5.4" (13.7cm). Large - 1.95" (5cm) x 5.75"
(14.6cm). Extra Large – 2.19" (5.6cm) x 6.1" (15.5cm).
#638-000-042AK Small Xcoil Sporting Pad, 8C26B02. . . . . . . . . . . . . . . . . . . . . . . . . $ 43.35
#638-000-017AK Med Xcoil Sporting Pad 8C26B02 . . 43.35
#638-000-018AK Large Xcoil Sporting Pad, 8C26B02. . . . . . . . . . . . . . . . . . . . . . . . . . 43.35
#638-000-044AK Extra Large Xcoil Sporting Pad, 8C26B02. . . . . . . . . . . . . . . . . . . . . . . . . . 43.35
#638-000-043AK Small Xcoil Universal Pad, 8C26B02. . . . . . . . . . . . . . . . . . . . . . . . . . 43.35
#638-000-019AK Med Xcoil Universal Pad 8C26B02. 43.35
#638-000-020AK Large Xcoil Universal Pad, 8C26B02. . . . . . . . . . . . . . . . . . . . . . . . . . 43.35
Selection • Service • Satisfaction
BROWNELLS
. . . ONLY THE BEST . . . 427
PAGE recoil pads
Traditional, black, hard
rubber buttstock spacers add
length to any rifle or shotgun
stock. Grinds beautifully and
takes a nice polish without a
lot of hard work.
SPECS: Hard rubber, black. 53⁄4"
(14.6cm) high, 2" (5cm) wide.
Available in 6mm (1⁄4"), 8mm
(5⁄16"), 12mm (1⁄2") and 24mm (1")
thick.
#661-100-006AK 1⁄4" Hard Rubber Spacer 1F08Y25. . . $ 8.50
#661-100-008AK 5⁄16" Hard Rubber Spacer 1F09Y99. . . 10.50
#661-100-012AK 1⁄2" Hard Rubber Spacer 1F11Y79. . . 12.50
#661-100-024AK 1" Hard Rubber Spacer 1F16Y51. . . . 18.75
100 STRAIGHT TERMINATOR RECOIL PAD
Loosen the laces and this recoil-absorbing pad comes right off with no alteration or damage to your rifle’s buttstock. Made from top-grain cowhide so
only soft, supple leather touches your
face or your rifle. Extends the stock by
b
only 3⁄8" and weighs less than 3 ounces. a
SPECS: Tanned cowhide, smooth texture, cordovan color. Nylon
laces, brass eyelets. 4" (10cm) long. Available in Small - 43⁄4" (12cm),
Medium - 5" (12.7cm), Large - 51⁄2" (14cm). Measure height at
buttstock and order by size.
#138-100-001AK Small Lace-On Pad 8C14H16. . . . . . $ 23.99
#138-100-002AK Medium Lace-On Pad 8C14H16 . . . . 23.99
#138-100-003AK Large Lace-On Pad 8C14H16. . . . . . . 23.99
HOGUE EZG™ RECOIL PADS
BUTTPLATES
Fashioned from durable black polymer, these
spacers sand and polish to a high quality finish.
Slotted mounting holes make it easy to match most
screw locations for ease of fitting. Three spacer sizes allow custom tailoring for length of pull. Adds a
nice final touch to recoil pad installations. a
b
SPECS: Black polymer plastic. 2.25" (5.7cm) wide,
5.8" (14.8cm) long. Hole spacing: 2.6" (6.7cm) min.,
3.6" (9.3cm) max. 1⁄8" (3.17mm), 1⁄4" (6.35mm) and 1⁄2"
(12.7mm) thick.
#440-701-180AK 1⁄8" Stock Spacer 4D04Z75. . . . . . . . . . $ 7.99
#440-701-140AK 1⁄4" Stock Spacer 4D04Z75. . . . . . . . . . . 7.99
#440-701-120AK 1⁄2" Stock Spacer 4D06Z44. . . . . . . . . . 12.61
WHITE - Pliable, off-white/light tan
rubber. Sides turn white when you
grind them. a
b
SPECS: Approx. 53⁄4" (19.6cm) x 2"
1
⁄
(2.5cm) x 16" (1.59mm).
#692-920-001AK WPS-20 White Spacer, 2F05P67. . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.50
Perfect When You Need A Lot Less
Recoil & Just A Little More Length
STOCK WORK
BUTTSTOCK PITCH SPACER
PACHMAYR RECOIL PADS
Protect Shoulders From The Heaviest Recoil; Easily Ground For Proper Fit
STOCK WORK
Get a significant reduction in felt recoil, and a non-slip surface that keeps the gun butt in place on your shoulder. Long the industry standard, Pachmayr pads use specially designed internal ribbing
to gradually absorb the kick and protect your shoulder. A variety of faces, chosen to match the application, make certain your gun will mount easily and hold tightly. Screw hole spacings and the taper of
the pad’s toe vary with pad size to allow proper fitting to a wide variety of gun stocks. High grade rubber grinds/sands to shape easily for a professional fit.
DECELERATOR®
SC100
SPORTING CLAYS
BLACK BASE
A 752-style pad with Decelerator material to
soak up recoil, and a hard insert at the heel to slide
smoothly over clothing. a
b
SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Med.,
1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x
5.75" (14.6cm). .8" = 20.3mm, 1" = 2.54cm.
STOCK #
THICK
FACE
COLOR
SIZE
#690-011-157AK
.8"
Leather
Black
Small
#690-011-158AK
.8"
Leather
Black
Medium
#690-011-159AK
.8"
Leather
Black
Large
#690-011-168AK
.8"
Leather
Brown Medium
#690-012-157AK
Black
Small
1"
Leather
#690-012-158AK
Black
Medium
1"
Leather
#690-012-159AK
1"
Leather
Black
Large
1"
Leather
Brown Small
#690-012-167AK
#690-012-168AK
1"
Leather
Brown Medium
#690-012-169AK
Brown Large
1"
Leather
— Advise # — SC100 Black Base Pad 2F31X32. . . . . $ 46.49
D200B/D500B
recoil pads
ULTRA-LIGHT FIELD PAD
BLACK BASE
Ultra low-profile pad designed for rimfire and
other low-recoil guns ensures fast, yet secure shouldering in the field. Gently concave face helps prevent shouldered rifle from slipping. Made of black
Decelerator rubber with solid black base, no white
line. Available with Stippled or Basketweave pattern molded into face. a
b
SPECS: Two (2) mounting screws included. D200B
Stippled – 1.95" (4.9cm) x 5.40" (13.7cm) x .50" (1.3cm).
D500B Basketweave – 1.80" (4.6cm) x 5.50" (14cm) x
.50" (1.3cm).
STOCK #
MODEL THICK
FACE
COLOR
Stippled
Black
#692-000-020AK D200B
.5"
#692-000-021AK D500B
.5"
Basketweave
Black
- Advise # - D200B/D500B Decelerator Ultra-Light Pad, 2F09T67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99
D550
BLACK BASE TRAP
Recoil-absorbing, smooth-sided trap pad with
solid black base, no white line. a
b
SPECS: Medium, 1.95" (4.9cm) x 5.35" (13.6cm);
Large, 2.05" (5.2cm) x 5.70" (14.5cm). 1.1" = 2.8cm.
STOCK #
THICK FACE COLOR SIZE
#690-521-158AK
1.1" Pigeon Black Med
#690-521-159AK
1.1" Pigeon Black Lrg
— Advise # — D550 Black Base Trap Pad, 2F31Y32. . . . . . . . . . . . . . . . $ 46.49
B
ROWNELLS
428
PAGE DELUXE
LIGHTWEIGHT
D750B
BLACK BASE
Famous Decelerator rubber plus smooth sides and
tapered, internal ribbing soak up rifle recoil. Classic
design with a solid black base (no white line). a
b
1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75"
(14.6cm). .6" = 15.2mm, .8" = 20.3mm, 1" = 2.54cm.
STOCK #
THICK
FACE
COLOR
SIZE
#690-551-158AK
.6"
Basketweave Black Medium
#690-551-159AK
.6"
Basketweave Black Large
#690-552-158AK
.8"
#690-553-157AK
1"
Basketweave Black Small
#690-553-158AK
1"
1"
Basketweave Black Large
#690-553-159AK
#690-553-168AK
1"
Basketweave Brown Medium
F325
F250
WHITE LINE FIELD
Field shape in a lightweight design. Finely
checkered surfaces for fast gun handling without
slipping away from shoulder. a
b
SPECS: Small, 1.75" (4.5cm) x 5.10" (13cm). Medium, 1.80" (4.6cm) x 5.35" (13.6cm). Large, 1.90"
(4.8cm) x 5.35" (13.6cm) (toe angle differs from medium). .85" = 21.6mm.
STOCK #
THICK
FACE
COLOR SIZE
#690-051-157AK
.85"
Lined Checkrd Black Small
#690-051-158AK
.85"
Lined Checkrd Black Medium
#690-051-159AK
.85"
Lined Checkrd Black Large
#690-051-167AK
.85"
Lined Checkrd Brown Small
#690-051-168AK
.85"
Lined Checkrd Brown Medium
#690-051-169AK
.85"
Lined Checkrd Brown Large
— Advise # — F250 White Line Field Pad, 2F16B99. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 25.49
— Advise # — D750B Decelerator Pad, 2F25Y33. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 37.98
YOUTH
D752
Smaller Size Looks Correct On Petite Rifles
OLD ENGLISH
BLACK BASE
Classic, smooth-sided pad made from famous Decelerator rubber. Features tapered, internal ribbing.
Solid base, no white line. a
b
1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x
5.75" (14.6cm). .6" = 15.2mm, .8" = 20.3mm, 1" =
2.54cm.
STOCK #
THICK
FACE
COLOR
SIZE
#690-541-157AK
.6"
Leather
Black
Small
#690-541-158AK
.6"
Leather
Black
Medium
#690-541-159AK
.6"
Leather
Black
Large
#690-541-167AK
.6"
Leather
Brown
Small
#690-541-168AK
.6"
Leather
Brown
Medium
#690-542-157AK
.8"
Leather
Black
Small
#690-542-158AK
.8"
Leather
Black
Medium
#690-542-159AK
.8"
Leather
Black
Large
.8"
Leather
Brown
Small
#690-542-167AK
#690-542-168AK
.8"
Leather
Brown
Medium
#690-543-157AK
1"
Leather
Black
Small
#690-543-158AK
Black
Medium
1"
Leather
#690-543-159AK
1"
Leather
Black
Large
#690-543-167AK
1"
Leather
Brown
Small
#690-543-168AK
1"
Leather
Brown
Medium
#690-543-169AK
1"
Leather
Brown
Large
#690-000-015AK
1"
Leather
Red
Medium
— Advise # — D752 Black Base Old English Pad, 2F25Y69. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 37.99
Smaller in all dimensions to look and fit right on
youth or smaller rifles and shotguns. Tighter hole
spacing makes installation easier with less chance
of stock damage. a
b
SPECS: F-325 - Black, stipple face. 752B Decelerator®
pad. 1.68" (4.3cm) wide, 5.30" (13.5cm) high, 1" (2.5cm)
thick, 2.50" (6.35cm) c-to-c hole spacing.
#690-110-100AK F-325 XS Youth Pad, 2F16B32 . . . . . . . . . . . . . . . $ 25.99
#690-110-752AK 752B Decelerator Youth Pad, 2F25B33 . . . . . . . . . . . . . . . . . 37.98
F325B
DELUXE BLACK BASE FIELD
A favorite design for fast shooting. Shape, construction and hardness make it ideal for shotguns
or large caliber rifles. a
b
SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm). Medium, 1.90" (4.8cm) x 5.40" (13.7cm). Large, 2.05"
(5.2cm) x 5.70" (14.5cm). 1" = 2.54cm, 1.1" (2.79cm),
1.15" (2.92cm).
STOCK #
THICK
FACE
COLOR
SIZE
#690-121-157AK
1"
Stipple
Black
Small
#690-121-158AK
1.1"
Stipple
Black
Medium
#690-121-159AK
1.15"
Stipple
Black
Large
1"
Stipple
Brown
Small
#690-121-167AK
#690-121-168AK
1.1"
Stipple
Brown
Medium
1.15"
#690-121-169AK
Stipple
Brown
Large
— Advise # — F325B Blk Face Field Pad 2F18V84. $ 27.99
WHITE LINE SKEET
T550
WHITE LINE
Trap shooting requires a different shape in a recoil pad for accurate, repeated, shoulder positioning
and maximum recoil reduction. First choice of Trap
Champions everywhere. a
b
SPECS: Medium, 1.95" (4.9cm) x 5.35" (13.6cm);
Large, 2.05" (5.2cm) x 5.70" (14.5cm). 1.1" = 2.8cm.
STOCK #
THICK
FACE
COLOR
SIZE
#690-211-159AK
1.1"
Screen
Black
Large
#690-211-258AK
1.1"
Leather Black
Medium
#690-211-358AK
Pigeon
Black
Medium
1.1"
#690-211-359AK
1.1"
Pigeon
Black
Large
— Advise # — T550 White Line Pad, 2F21V34. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 30.99
SINCE 1939
A favorite design for fast action shooting. Shape,
construction and hardness make this pad ideal for
shotguns or large caliber rifles. a
b
SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm). Medium, 1.90" (4.8cm) x 5.40" (13.7cm). 1" = 2.54cm,
1.1" = 2.79cm.
STOCK #
THICK
FACE
COLOR
SIZE
#690-111-157AK
1"
Stipple
Black
Small
#690-112-158AK
1.1"
Stipple
Black
Medium
#690-111-167AK
1"
Stipple
Brown Small
1.1"
#690-112-168AK
Stipple
Brown Medium
— Advise # — F325 White Line Fld Pad 2F18P84 . . $ 27.99
S325
TRAP
DELUXE
WHITE LINE FIELD
This design is based on exhaustive testing by top
skeet shooters and professionals. A medium-sized
page with a superior shape that has the right “feel”
so necessary for both shooter comfort and fast gun
handling. b
a
SPECS: 1.90" (4.8cm) x 5.40" (13.7cm).
STOCK #
THICK
FACE
COLOR
SIZE
#690-132-158AK
1"
Ribbed
Black
Medium
#690-132-168AK
1"
Ribbed
Brown Medium
— Advise # — S325 White Line Skeet Pad, 2F22C49. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
Follow Us • Friend Us • Like Us
Go online for special promotions, contests and news.
Leave your comments or suggestions!
PRE-FIT
RIFLE
Decelerator Pads, Pre-Contoured
For Popular Stocks
IMAGNUMI
®
BLACK BASE
RIFLE BLACK BASE
XLT MAGNUM
ULTRA-SOFT TRAP PAD
RP250
BLACK BASE
Super Soft Pads For Longer Shooting Sessions
Flat face with “downward slanting” horizontal
grooves comes to shoulder easily without drag. a
b
SPECS: Medium, 1.90" (4.8cm) x 5.55" (14.1cm). .5"
= 12.7mm.
STOCK #
#690-091-158AK .5" Grooved Black Medium
— Advise # — RP250 Black Base Pad, 2F14B34. . . . . . . . . . . . . . . . . $ 21.99
500B
50% softer than the Decelerator™ pad with smooth
grinding and fitting characteristics that make this
pad easy to install while giving your favorite trap
gun classy good looks and providing you with superior comfort. Leather-style face provides a grippy
surface to keep the gun firmly seated on your shoulder. Won’t go “flat” after years of shooting and vertical storage. Available in Medium and Large. b
a
SPECS: Black rubber. Med., 1.95" (4.9cm) x 5.35 (13.6cm). 1.1"
(2.8cm) thick. Lrg, 2.05" (5.2cm) x 5.70" (14.5cm). 1.2" (3.1cm) thick.
#690-000-020AK XLT Trap Pad, Medium 2F31X15. . . $ 46.99
#690-000-021AK XLT Trap Pad, Large 2F31X32. . . . . . 46.49
KICK-EEZ
JR. MODEL RECOIL PAD
BLACK BASE
Basketweave rifle pad for the finest custom jobs.
Solid color base preferred by many. a
b
SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Medium, 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x
5.75" (14.6cm). .4" = 10.2mm.
STOCK #
THICK
FACE
COLOR
SIZE
#690-191-157AK
.4" Basketweave
Black
Small
#690-191-158AK
.4" Basketweave
Black
Medium
#690-191-159AK
.4" Basketweave
Black
Large
#690-191-168AK
.4" Basketweave
Brown
Medium
— Advise # — 500B Black Base Pad, 2F15T06. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.99
RP200
WHITE LINE
Stippled face grips clothing, prevents rifle movement during recoil. Contrasting white line. a
b
SPECS: Med., 1.85" (4.7cm) x 5.40" (13.7cm). .5" =
12.7mm.
STOCK #
#690-031-158AK
.5" Stipple Black
Med
#690-031-168AK
.5" Stipple Brown Med
— Advise # — RP200 White Line Pad, 2F15Z21. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.49
Extra thick, extra soft, “Triple Magnum” design.
Recoil is distributed over entire pad. Tapered ribbing, layered core, with non-bending inserts that
prevent unwanted downward movement. Fieldstyle for easy shouldering. a
b
SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm); Med,
1.90" (4.8cm) x 5.40" 13.7cm).
STOCK #
#690-371-257AK 1.50" Leather Black Small
#690-371-258AK 1.50" Leather Black Med
— Advise # — F990 White Line Field 2F48Y86. . . . . $ 72.99
AR15BUILDER.COM
Smaller Size Plus Greater Comfort
Sorbothane® rubber gives smaller shooters freedom from sore shoulders and pain. Junior size
compliments and installs more easily on youth or
smaller rifles and shotguns, and stocks that have
been shortened. Black base with leather grain textured face. a
b
SPECS: Black. 1.75" (4.4cm) x 4.75" (12cm) x 1"
(2.54cm), 2.75" (7cm) center-to-center hole spacing.
#440-300-101AK Jr. Recoil Pad 4D25Z17. . . . . . . . . . . $ 39.99
HIVIZ XCOIL PREFIT RECOIL PAD
Superb Recoil Protection; Easy Installation
Don’t spend hours grinding and fitting a recoil
pad; gain reduced pain from recoil, plus improve
the looks of your favorite shotgun or rifle with the
easy-to-install, pre-fit XCoil. Made from a proprietary recoil-absorbing, synthetic composite material to stop the pain, fatigue, and accuracy-robbing
flinch caused by excessive recoil. Textured pad face
prevents slippage for consistent stock position and
cheekweld. Pre-shaped to install easily in place of
your factory recoil pad. a
b
SPECS: Composite synthetic rubber, black with hardplastic, black base. Includes installation screws and plugs.
STOCK #
FITS FACTORY STOCK
#638-000-062AK Benelli Super Black Eagle w/synthetic stock
®
#638-000-069AK Ruger M77® Mark II w/synthetic stock
— Advise # — XCoil Recoil Pad 8C26B02. . . . . . . . . . $ 43.35
For more choices of HIVIZ
RECOIL PADS visit brownells.com
order on the web
www.brownells.com
200 Series Dual Action
300 Series
300 Series Dual Action
400 Series
500 Series
These pads don’t just slow recoil down, they actually cut the
kick dramatically by absorbing it! Made from soft, springy, Sorbothane, they end next-day-hurt, tame large caliber flinch and
allow recoil-sensitive shooters to shoot in comfort. Won’t ever
bottom out. Grind and shape like regular pads, just don’t allow
heat to build up. 200 Series Dual Action Sporting Clays pad has
two layers of Sorbothane for extra protection. The first layer
reacts quickly to absorb initial recoil, while the second layer
dissipates the remaining energy to maximize absorption. Heel
is canted approximately 45° for easy shouldering from the “low
gun” position. 300 Series All Purpose has a slightly concave face
designed for all shooting applications. 300 Series Dual Action
All Purpose pad combines the two-layer absorption properties of
the 200 Series Dual Action pads with a flat back and downwardcanted ends for easy shouldering in a wide variety shooting applications. 400 Series Trap has a more pronounced concave face
than 300 Series for fixed-position trapshooting. 500 Series Magnum is designed for heavy recoiling guns and has a flat face and
downward canted ends for easy shouldering. All pads feature
solid sides, a black base, and leather-grain textured face. a
b
SPECS: Sorbothane® visco-elastic polymer. Large - 2.03" (5.1cm)
x 5.65" (14.3cm). Medium - 1.93" (4.9cm) x 5.33" (13.5cm). DA =
Dual Action. Dimensions shown in chart are nominal and can vary
due to ambient temperature and humidity conditions present at
the time of manufacture.
STOCK #
MODEL #
SIZE
THICK
COLOR
#440-000-050AK DA-201-8-L-B
Large 15⁄16" (2.4cm)
Black
#440-000-051AK DA-201-10-L-B
Large 11⁄8" (2.9cm)
Black
#440-000-052AK DA-202-8-M-B Med. 15⁄16" (2.4cm)
Black
#440-000-053AK DA-202-10-M-B Med. 11⁄8" (2.9cm)
Black
#440-000-025AK 301-5-L-B
Large ½" (1.3cm)
Black
#440-301-106AK 301-6-L-B
Large ¾" (1.9cm)
Black
#440-301-108AK 301-8-L-B
Large 15⁄16" (2.4cm)
Black
#440-301-110AK 301-10-L-B
Large 11⁄8" (2.9cm)
Black
#440-000-054AK DA-301-8-L-B
Large 15⁄16" (2.4cm)
Black
#440-000-055AK DA-301-10-L-B
Large 11⁄8" (2.9cm)
Black
#440-302-106AK 302-6-M-B
Med. ¾" (1.9cm)
Black
#440-302-108AK 302-8-M-B
Med. 15⁄16" (2.4cm)
Black
#440-302-110AK 302-10-M-B
Med. 11⁄8" (2.9cm)
Black
#440-000-056AK DA-302-8-M-B Med. 15⁄16" (2.4cm)
Black
#440-000-057AK DA-302-10-M-B Med. 11⁄8" (2.9cm)
Black
#440-401-106AK 401-6-L-B
Large ¾" (1.9cm)
Black
#440-401-108AK 401-8-L-B
Large 15⁄16" (2.4cm)
Black
#440-401-110AK 401-10-L-B
Large 11⁄8" (2.9cm)
Black
#440-402-106AK 402-6-M-B
Med. ¾" (1.9cm)
Black
#440-402-108AK 402-8-M-B
Med. 15⁄16" (2.4cm)
Black
#440-402-110AK 402-10-M-B
Med. 11⁄8" (2.9cm)
Black
#440-000-044AK 403-6-L-B
Large ¾" (1.9cm)
Black
#440-000-045AK 403-8-L-B
Large 15⁄16 " (2.4cm) Black
#440-000-026AK 403-10-L-B
Large 11⁄8" (2.9cm)
Black
#440-501-112AK 501-125-L-B
Large 13⁄8" (3.5cm)
Black
#440-502-112AK 502-125-M-B
Med. 13⁄8" (3.5cm)
Black
— Advise # — 200/300 Kick-Eez Recoil Pad, 4D31Z67. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 34.99
— Advise # — 400 Kick-Eez Recoil Pad 4D28Z51. . . . 35.99
— Advise # — 500 Kick-Eez Recoil Pad 4D28Z51. . . . 35.99
BROWNELLS
. . . ONLY THE BEST . . . 429
PAGE recoil pads
Extremely elegant pads for fine guns. Same internal configuration as Presentation pad. Smooth
sides, rounded edges. Solid black base, no white
a
line. b
SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Medium, 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm)
x 5.75" (14.6cm). .6" = 15.2mm, .8" = 20.3mm, 1" =
2.54cm.
STOCK #
THICK
FACE
COLOR
SIZE
#690-311-157AK
.6"
Leather Black
Small
#690-311-158AK
.6"
Leather Black
Medium
#690-311-159AK
.6"
Leather Black
Large
#690-312-157AK
.8"
Leather Black
Small
#690-312-158AK
.8"
Leather Black
Medium
#690-312-168AK
.8"
Leather Brown
Medium
#690-312-169AK
.8"
Leather Brown
Large
#690-313-157AK
1"
Leather Black
Small
1"
Leather Black
Medium
#690-313-158AK
#690-313-159AK
1"
Leather Black
Large
#690-313-167AK
1"
Leather Brown
Small
#690-313-168AK
1"
Leather Brown
Medium
#690-313-169AK
1"
Leather Brown
Large
#692-000-005AK
1"
Leather Hunter Green Small
#692-000-006AK
1"
Leather Hunter Green Medium
— Advise # — 752B Black Base Pad, 2F19C34. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
RECOIL PAD
Soft, Genuine Sorbothane®
White Line Field Style Pad For Easy Shouldering
Stippled face grips clothing, prevents rifle movement during recoil. Solid color base preferred by
many. a
b
SPECS: Med, 1.85" (4.7cm) x 5.40" (13.7cm). .5" =
12.7mm.
STOCK #
THICK FACE
COLOR SIZE
#690-032-158AK
.5"
Stipple Black
Med
#690-032-168AK
.5"
Stipple Brown Med
— Advise # — RP200 Black Base Pad, 2F15Z06. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.99
OLD ENGLISH
752B
F990 TRIPLE MAGNUM
STOCK WORK
Unscrew a factory buttplate or pad and screw on
Pachmayr’s premier model - with no gunsmithing!
The hole spacing usually matches and, where needed, rifle models include an adapter/spacer to make
mounting easier. The exterior shape is ground and
finished to within .050" of the stock. All have solid
sides and a black base. Rifle pads feature a basketweave face so the gun stays on your shoulder.
Shotgun pads are Old English-style with a leather
grained face for quick shouldering. a
b
SPECS: Black Decelerator rubber, black base. Designed to fit current production models that were fitted at the factory with an O.E.M. recoil pad. 1" (2.5cm) thick.
STOCK #
FITS
#690-000-016AK Browning Citori wood stock
#690-000-017AK Marlin 336 wood stock
#690-000-004AK Marlin 1895 Guide Gun, 444P, 1894 Ported
#690-601-700AK Rem. 1100 full size, wood stock
#690-601-705AK Rem. 870 Express wood stock
#690-601-710AK Rem. 700 BDL wood stock flat
#690-601-711AK Rem. 700 ADL/BDL synthetic stock
#690-601-712AK Rem. 700 ADL/BDL wood stock, curved
#690-601-711AK Rem. 700 Muzzle Loader synthetic stock
#690-601-704AK Ruger M77® Mark II wood stock
#690-601-724AK Savage 110 synthetic stock
#690-601-701AK Winchester 70 Classic wood stock
#690-000-008AK Winchester 70 synthetic stock, post ‘99
#690-601-719AK Winchester 94 wood stock
— Advise # — Pre-Fit Recoil Pad, 2F27X34. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 41.99
RP200
KICK-EEZ
KICK-EEZ
KICK-EEZ
SIMS VIBRATION LABORATORY
PRE-FIT RECOIL PADS
ROCKER RECOIL PAD
SPECIAL PURPOSE RECOIL PAD
LIMBSAVER® RECOIL PAD
Recoil-Absorbing Pads For Popular
Rifles & Shotguns; Drop-In Installation
Comes Quickly To Your Shoulder
With Consistent Comfort & Fit
STOCK WORK
KICK-EEZ
Drop-in replacement buttpad with outstanding
recoil absorption properties reduces felt recoil by,
and minimizes flinch for fast, accurate follow up
shots and no “day after” shoulder pain. These pads
are pre-shaped to fit the factory stock contours and
screw spacing of specific rifle and shotgun models,
so there’s no grinding, fitting, or drilling. Remove
the current buttpad, replace with a Kick-Eez. Made
of Sorbothane®, a unique visco-elastic polymer that disperses
recoil energy outward, away from the shooter’s shoulder, without
distorting or bottoming out. Retains its 100% memory even after
thousands of shots. a
b
SPECS: Sorbothane synthetic rubber, black. Approximately 13⁄16"
(3cm) thick. Includes (2) mounting screws and installation instructions.* Buttpad height measured from heel to toe.
recoil pads
STOCK #
FITS GUN/STOCK TYPE
#440-000-030AK
Baikal, wood; Beretta, all 53⁄8"*
wood/synthetic; Stoeger, wood
(some models)
#440-000-028AK
Benelli M1 Field/SBE I
(non-tactical 12 ga.), wood/synthetic;
Sport 12 ga., synthetic; Montefeltro, wood;
Franchi Verimax 912 (12 ga.)/Auto
Composite (12 ga.), synthetic; Stoeger,
synthetic (most 12 ga. models)
#440-000-040AK
Beretta, all 5"* wood/synthetic
#440-000-037AK
Browning A-Bolt, synthetic; H&R SB2-988
Ultra Slug Hunter, wood; Parker-Hale 7mm
Mag, wood; Rem 870 Youth (non-Express),
wood; Winchester 70/94, wood (most)
#440-000-038AK
Browning A-Bolt, wood-micro/A-Bolt New
Short Mag/Stalker, synthetic; Mossberg
550 Youth, wood
#440-000-039AK
Browning BAR/Citori/Gold, wood;
Ruger M77 Mark I & II/No. 1/Red Label
(1979-80 only), wood
#440-000-027AK
Browning A-Bolt Medallion, wood (1993
only); Browning BLR 81, wood; Savage,
most models, wood
#440-000-035AK
Ithaca 37 (pre-1970), wood; Mossberg 835
Camo, synthetic; Remington 700 ADL/BDL
47⁄8"* flat stock, wood/Model Seven, wood;
Ruger M77 Mark II Compact, wood laminate; Tikka, synthetic; Winchester 88, wood
#440-000-029AK
Marlin 336/444/450/512; Mossberg 500 AG
Turkey/9200/9300, wood; Remington 870
Wingmaster (non-Express)/870
Police/11-87 SP (1992 only), wood;
Weatherby Vanguard; Winchester 70
Carbine (.30-06)/Mod 100, wood
#440-000-034AK
Browning Citori 1981, wood (English
stock); Mossberg 500/835, synthetic (black
and 2003 Mossy Oak & Real Tree camo);
Winchester Coyote, wood laminate
#440-000-036AK
CVA Wolf Muzzleloader, synthetic (1996
only); Remington 700 ADL/BDL, 415⁄16"*
flat stock/870 Youth, wood; Verona 20
ga., wood; Winchester 70, synthetic; Win
70 Featherweight/670/1400/Super X-1/.
Supreme Select Sporting O/U
#440-000-049AK
Remington 700, all models, synthetic
#440-000-032AK
Thompson Center Black
Diamond/Encore/Omega, synthetic
#440-000-033AK
Thompson Center Black
Diamond/Encore/Omega, wood
#440-000-031AK
Winchester 1300, synthetic
— Advise # — Pre-Fit Recoil Pad 4D23Z50. . . . . . . . $ 40.95
B
ROWNELLS
430
PAGE Shock-absorbing Sorbothane® really soaks up
recoil. Features a tapered toe for a snug fit that
does not dig into your shoulder. The heel features
a round contour that lets you bring the gun up fast
and easy, without grabbing your clothes. Provides
repeatable, consistent gun mounting for greater
comfort and accuracy. Attractive, leather face. b
a
SPECS: Includes screws. 2" (5cm) x 55⁄8" (14.3cm).
Thick - 1.2" (3cm); Thin - .940" (2.4cm) maximum thickness.
#440-000-023AK Thick Rocker Recoil Pad, 4D25Z17. . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99
#440-000-024AK Thin Rocker Recoil Pad, 4D25Z17. . . . . . . . . . . . . . . . . . . . . . . . . . 39.99
Soft Sorbothane®
For Difficult-To-Fit Stocks
Solid pad with adjustable
hole spacing for easier fitting
to those “hollow” stocks on
Browning Gold, Beretta 390
and Benelli shotguns. Soft,
Sorbothane dramatically ab-
sorbs recoil energy. a
b
SPECS: Sorbothane. Black. Flat leather face. 21⁄4" (5.7cm) W, 6"
15⁄
(15cm) long, 16" (24mm) thick. Includes screws.
#440-801-001AK Special Purpose Pad, 4D26Z19. . . . . . . . . . . . . . . . . . . . . . . . . $ 44.99
MASEN SEMI-AUTO RIFLE
RUBBER RECOIL PAD
KICK-EEZ
SPORTING CLAYS RECOIL PAD
Sorbothane® Absorbs Recoil,
Plus Altered Design Is Easier To Shoulder
Functional, diagonal cut at the heel won’t catch
on clothing, so it’s easier and faster to shoulder
when you’re shooting your favorite sporting clays
course. Made from Sorbothane material that’s soft
and springy to soak up recoil force and prevent
sore, next-day shoulder. Must be ground to fit, just
like conventional rubber pads. a
b
SPECS: Leather face. Includes screws. All dimensions are nominal. Hole spacing: 31⁄8" center-to-center. Large - 2"
(5.1cm) x 55⁄8" (14cm). Medium - 17⁄8" (4.8cm) x 5¼" (13.3cm).
STOCK #
MODEL #
SIZE
THICK
COLOR
#440-201-110AK
201-10-L-B
Large
11⁄8" (30mm) Black
15⁄
#440-201-108AK
201-8-L-B
Large
16" (24mm) Black
#440-201-106AK
201-6-L-B
Large
¾" (19mm)
Black
1⁄
#440-202-110AK
202-10-M-B Med.
1 8" (30mm) Black
15⁄
202-8-M-B
Med.
#440-202-108AK
16" (24mm) Black
#440-202-106AK
202-6-M-B
Med.
¾" (19mm)
Black
— Advise # — Kick-Eez Sporting Clay Pad, 4D25Z77. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99
KICK-EEZ
SLIP-OVER RECOIL SYSTEM
Outstanding Felt Recoil Reduction;
No Permanent Changes To Gun
Rubber pad slips over buttstock and uses
a recoil-absorbing Sorbothane® insert to
decrease felt recoil and improve
shooter comfort. Helps reduce
shooter fatigue during long shooting sessions, so you can shoot
more and maintain better scores.
Shock-absorbing Sorbothane will not bottom out or lose elasticity, even after thousands of shots. Add more inserts, available
separately, for even more recoil-absorption or to adjust length of
pull. Inserts can be used with any popular slip-on-type recoil pad
and may be trimmed for precise fit. Available in Small, Medium,
and Large sizes to fit a variety of rifles and shotguns. a
b
SPECS: Slip-Over Pad - Synthetic rubber, black. Small fits buttstocks 4½"(11.4cm) high x 1½" (3.8cm) wide up to 413⁄16" (12.2cm) x
15⁄8" (4.1cm). Medium fits 413⁄16" (12.2cm) x 15⁄8" (4.1cm) up to 51⁄8"
(15.9cm) x 1¾" (4.5cm). Large fits 51⁄8" (15.9cm) x 1¾" (4.5cm) up
to 55⁄8" (13.65) x 17⁄8". Inserts – Sorbothane rubber, red. Sized to fit
in slip-on pads. Package contains two (2) ¼" thick inserts.
#440-000-041AK Sml Slip-On Recoil Pad 4D21Z88. . $ 39.99
#440-000-042AK Med Slip-On Recoil Pad 4D21Z88 . . 39.99
#440-000-043AK Lrg Slip-On Recoil Pad 4D22Z50. . . 39.00
#440-000-046AK Small Recoil Inserts 4D09Z44. . . . . . 12.61
#440-000-047AK Medium Recoil Inserts 4D09Z44 . . . 12.61
#440-000-048AK Large Recoil Inserts 4D09Z44. . . . . . 12.61
Extra-Length Plus No-Slip Surface
Increases stock length to better fit
shooters with long arms. Provides a
cushioned, recoil absorbing, non-slip
surface. Replaces original pad with no
permanent alterations. AR-15/M16
model fits A1 and A2 trap door buttstocks; adds 3⁄4" length. CAR-15 model fits collapsible stock; adds
3⁄
7
7
®
4". M14/M1A adds ⁄8". M1 Garand model adds ⁄8". Ruger model
fits 10/22® , Mini-14® with serial number beginning “580” and
b
higher, Mini-Thirty®, and Model 96™; adds 11⁄8". a
SPECS: Polyethylene rubber, black. Serrated face.
#560-153-700AK AR-15/M16 Recoil Pad 6E11U69. . . $ 13.99
#560-153-800AK CAR-15 Recoil Pad 6E11U11. . . . . . . 12.99
#560-153-808AK M14/M1A Recoil Pad 6E13U34 . . . . . 14.99
#560-153-809AK M1 Garand Recoil Pad 6E11U69 . . . 13.99
#560-153-807AK Ruger Recoil Pad 6E14U17. . . . . . . . 15.99
REMINGTON 700/870
SUPERCELL™ RECOIL PAD
Get 54% Less Felt Recoil
For All Day Shooting Comfort
Manufactured by Remington, the advanced Supercell pad provides an amazing 54% reduction in
felt recoil over the standard factory pad. Helps prevent flinching for quick, accurate follow up shots,
and ensures all-day shooting comfort. Lightweight,
advanced polymer construction won’t change the
balance of your Model 700 ADL/BDL rifle or 870
shotgun. Easy, drop-in installation. Models to fit synthetic and
wood stocked guns. a
b
SPECS: Advanced polymer, black. Synthetic - Fits factory syn15⁄
thetic stock. 16" (2.7cm) thick. Wood - Fits factory wood stock.
11⁄16" (2.7cm) thick. 700 - Fits Model 700 ADL/BDL rifles. Includes
mounting screws. 870 - Fits Remington 870 shotguns, 20/12
gauge. Requires original mounting screws.
#768-194-840AK Rem 700 Supercell Recoil Pad,
Synthetic, 8F18A99. . . . . . . . . . . . . . . . $ 19.99
Wood, 8F18A99. . . . . . . . . . . . . . . . . . . . . 19.99
Synthetic, 7F32A29. . . . . . . . . . . . . . . . . 34.60
Wood, 7F32A29. . . . . . . . . . . . . . . . . . . . 34.60
WOULD YOU LIKE TO MEET LEGENDS
IN THE FIREARMS INDUSTRY?
Check out our annual Gunsmith
Conference and Career Fair
at www.gunsmithcareerfair.com
SINCE 1939
Pre-Fit Pads That Take The Hurt
Out Of Rifle & Shotgun Shooting
Energy absorbing, NAVCOM™ material combined with dual, airtight chambers and elastic
motion to reduce recoil-induced shock up to 50%
over factory pads. Gives greater protection for the
shooter; allows more shooting, without soreness
and discomfort at the end of a long shooting day.
Plus, proprietary Anti-Muzzle Jump Technology
helps distribute shock to reduce muzzle rise for
faster, more accurate follow up shots. Pre-fit pads;
check price line to see if pad fits wood or synthetic
stock. b
a
SPECS: NAVCOM synthetic material. Black with black base. Ribbed
face. Screw-on replacement requires no fitting for guns with factory recoil pad. Benelli fits 12 gauge, including wood and synthetic
stocked M1, Sport, and Super Black Eagle, and synthetic stocked
Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger
fits recessed Ruger synthetic stocks, plus Sako 75 and Tikka T-3
Lite synthetic stocks. Browning Gold also fits Ruger 77 and #1.
Mossberg 835/500 fits post-1999 manufactured guns. Mossberg
835 47⁄8" fits guns; with synthetic buttstocks 47⁄8" (12.4cm) long
from heel to toe.
STOCK #
FITS
PRICE
#902-000-021AK Benelli
7K31H54 $ 41.99
#902-000-075AK Beretta 53⁄8"stocks, all
7K31Y54 $ 41.99
#902-000-076AK Beretta 5" stocks, all
7K31Y54 $ 41.99
#902-000-065AK Brn. A-Bolt, wood
7K30Y30 $ 37.99
#902-000-066AK Brn. A-Bolt, synthetic
7K31Y54 $ 41.99
#902-000-064AK Brn. Gold Auto, wood
7K31Y54 $ 41.99
#100-002-233AK Brn. Gold Auto, synthetc
7K31V54 $ 41.99
#902-000-022AK Moss. 835/500, synthetic
7K31H54 $ 41.99
#100-002-236AK Ruger (recessed stock)/Sako
75/Tikka T-3 Lite, synthetic 7K31V54 $ 41.99
#100-002-251AK Mossberg 835 47⁄8"
7K31V54 $ 41.99
#902-000-060AK Rem. 870, wood
7K31Y54 $ 41.99
#902-000-062AK Rem. 700 BDL, wood
7K31Y54 $ 41.99
#902-000-063AK Rem. 700 ADL, wood
7K31Y54 $ 41.99
#902-000-097AK Rem. 700/870/1100/12 ga.
11-87, synthetic
7K31Y54 $ 41.99
#902-000-077AK Savage 110, Wood
7K31Y54 $ 41.99
#100-002-235AK Thompson Center Encore/
Omega ML/Black Diamond
ML, wood or synthetic
7K30V30 $ 37.99
#902-000-095AK Win. 1300, synthetic
7K31Y54 $ 41.99
LIMBSAVER® GRIND-TO-FIT PADS
Advanced Technology Displaces Recoil;
Gives You A Custom-Fit Recoil Pad
Space-age, NAVCOM™ polymer, grind-to-fit recoil
pad reduces bruising and recoil pain on your shoulder. Grinds easily using a coarse belt for a perfectfitting recoil pad. Advanced Simms technology
spreads recoil throughout the entire pad for even
recoil displacement. Available in Small, Medium,
and Large. a
b
SPECS: Navcom polymer, black. 1" (2.54cm) thick.
Small - 413⁄16 " (12.2cm) long, 127⁄32" (4.7cm) wide;
grindable to 37⁄8" (10cm) long, 111⁄32" (3.4cm) wide. Medium - 53⁄32"
(13cm) long, 113⁄16" (4.6cm) wide; grindable to 41⁄4" (11cm) long,
15⁄16" (3.3cm) wide. Large - 59⁄16" (14cm) long, 21⁄16" (5.2cm) wide;
grindable to 47⁄16" (11.3cm) long, 119⁄32" (4cm) wide.
#902-000-072AK Limbsaver Grind-To-Fit Small, 7K31Y47. . . . . . . . . . . . . . . . . . . . . . . . . $ 41.99
#902-000-073AK Limbsaver Grind-To-Fit Medium, 7K31Y96. . . . . . . . . . . . . . . . . . . . . . . . . . . 41.99
#902-000-074AK Limbsaver Grind-To-Fit Large, 7K32Y21. . . . . . . . . . . . . . . . . . . . . . . . . . . 41.99
LIMBSAVER® SPEED MOUNT
RECOIL PAD
Recoil-absorbing pad of NAVCOM™ synthetic
material combines the proven effectiveness of the
original Limbsaver with improved shouldering
speed and Anti-Muzzle Jump Technology for fast,
accurate follow up shots. Beveled heel eliminates
the prominent edge that can catch on clothing and slow down
shouldering your shotgun. Wear-resistant Easy Glide surface
coating further reduces friction between pad and clothing. As the
firearm discharges, the redesigned two-chamber system inside
the pad engages, with the lower chamber compressing first to
direct the recoil force downward. Two, internal impact pillars
engage to distribute the force and further control the angle of
collapse, reducing muzzle jump by as much as 50%. Available
in pre-fit models for Mossberg and Remington shotguns, and a
grind-to-fit model for custom installations. a
b
SPECS: NAVCOM™ synthetic material, black, with black plastic
base. Ribbed face. Screw-on replacements require no fitting for
guns with factory recoil pad. Mossberg - Fits synthetic stock 500,
500A, 835, and 935. Remington - Fits wood stock 870 Wingmaster, non-Express models. Grind-To-Fit - 5.085" x 1.815, grinds to
approximately 4¼" x 15⁄16 . 3.125" center-to-center hole spacing.
#902-000-100AK Mossberg Speed Mount Pad, 7K26Y72. . . . . . . . . . . . . . . . . . . . . . . . . $ 34.99
#902-000-101AK Remington 870 Speed Mount Pad, 7K26Y72. . . . . . . . . . . . . . . . . . . . . . . . . . 34.99
#902-000-098AK Grind-To-Fit Speed Mount Pad, 7K26Y88. . . . . . . . . . . . . . . . . . . . . . . . . . 34.99
LIMBSAVER® SLIP-ON
RECOIL PAD
Quick, Easy Solution To Painful Recoil
TAPCO T6/M4 RECOIL PAD
Increase Shooting Comfort & Length-Of-Pull
CLASSIC LEATHER SLIP-ON RECOIL PAD - Highquality, full-grain leather recoil pad installs in
seconds to provide much needed recoil relief and
added length of pull without modification to your
stock or buttplate. Molded, internal cushion of
Decelerator Ultrasoft gives your shoulder all the
protection and comfort it needs while you’re at the
range or in the field. Slips on easily; hidden Velcro® closure wraps
tightly around bottom of the buttstock for a snug fit.
SPECS: Leather, brown. Small – Fits over buttplates 5" (12.7cm)
long x 11⁄2" (3.8cm) wide. Large – Fits over buttplates 53⁄8" (13.7cm)
long x 13⁄4" (4.5cm) wide.
#539-000-008AK Classic Slip-On Recoil Pad, Small, 9C25A49. . . . . . . . . . . . . . . . . . . . . . . . . $ 31.99
#539-000-010AK Classic Slip-On Recoil Pad, Large, 9C27A45. . . . . . . . . . . . . . . . . . . . . . . . . . 42.99
DECELERATOR® SPEED-MOUNT SLIP-ON RECOIL PAD - Slipon recoil pad with rounded heel section of slick
polymer helps limit friction so rifle or shotgun
slides smoothly to your shoulder. Heel section is
specially contoured to avoid clothing snag and
allow quick shouldering. Decelerator pad face
provides great recoil cushioning and stretchable
side material flexes to allow easy installation,
while providing plenty of grip to hold pad firmly
on stock. Adds 15/16" to length of pull. Available
in black or brown.
SPECS: Decelerator rubber, black or brown. Small - 47⁄8" (12.4cm)
long x 15⁄8" (4.1cm) wide. Medium - 5" (12.7cm) long x 1¾" (4.4cm)
wide. Large – 57⁄16" (13.8cm) long x 17⁄8" (4.8cm) wide.
STOCK # BROWN
STOCK # BLACK
SIZE
#692-000-015AK
#692-000-012AK
Small
#692-000-016AK
#692-000-013AK
Medium
#692-000-017AK
#692-000-014AK
Large
— Advise # — Decelerator Speed-Mount Slip-On Pad, 2F17T01. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 25.99
CSP ADJUSTABLE STOCK HARDWARE
Makes Rifle & Shotgun Combs
Fully Adjustable
Easy-to-install hardware, in two kit
styles, makes any wood stock fully adjustable for comb height and cast. Locking set screws secure adjustments. Comb
hardware is interchangeable between
kits. Adjustable Disk Kit - features separate bases that are inlaid
into the stock and comb. Adjustable Plate Kit - has a one-piece
base that is inlet into the stock and the insert bases for the comb.
Brass only. a
b
SPECS: Machined 360 brass or stainless steel. Gives .168"
(4.28mm) cast and .50" (12.7mm) height adjustment. Includes
bases, sleeves, set screws, Allen wrenches, comb pattern and
instructions. Requires permanent alterations to the stock.
#365-102-000AK Brass Adjustable Disk Hardware Kit, 5F68X51. . . . . . . . . . . . . . . . . . . . . . . . . $ 76.99
#365-102-100AK SS Adjustable Disk Hardware Kit, 5F68X51. . . . . . . . . . . . . . . . . . . . . . . . . . 73.99
#365-104-000AK Brass Adjustable Plate Hardware Kit, 5F66X49. . . . . . . . . . . . . . . . . . . . . . . . . . 69.99
The Proper Hardware
To Make Adjustable Rifle
& Shotgun Combs
Lets the shooter infinitely
adjust head placement to get
best fit for any type of shooting: rifle position shooting, changing between scopes and iron
sights or using a shotgun for both field and trap shooting. Allows
comb to adjust four ways: up, down, plus left and right. Comb
height is adjusted by sleeves inlet into the cut-off top of the comb,
and locked with set screws through side of stock. Left and right
adjustment is provided by posts sliding in milled slots in the
base plate and locked with set screws. Requires cutting of stock
and bedding of plates and sleeves into stock. Stock cannot be
returned to original condition. 350D features easy-to-see graduation marks for exact, repeat setting of left and right adjustment. SPL #870 and SPL #1000 are individual sleeves attached
to separate circular base plates that allow greater flexibility in
left and right comb placement and angle. a
b
SPECS: Aluminum. #425 - 41⁄4" (10.8cm) long x 1" (2.5cm) wide x
1⁄
1⁄
4" (6.3mm) thick. #350 & 350D - 3 2" (8.9cm) long. Width/thickness
same. SPL #870 - .870" (22.14mm) diameter base. SPL-#1000 - 1"
(2.5cm) diameter base. SPL models include two each, base plates,
posts and sleeves.
#352-100-425AK #425 Adjustable Comb Hardware, 2E28D67. . . . . . . . . . . . . . . . . . . . . . . . . $ 43.99
#352-100-350AK #350 Adj. Comb Hardware 2E28D67.43.99
#352-000-008AK #350D Adjustable Comb Hardware, 2E45D81. . . . . . . . . . . . . . . . . . . . . . . . . . 66.99
#352-100-870AK SPL #870 Adjustable Comb Hardware, 2E28D67. . . . . . . . . . . . . . . . . . . . . . . . . . 43.99
#352-000-005AK SPL #1000 Adjustable Comb Hardware, 2E28D67. . . . . . . . . . . . . . . . . . . . . . . . . . 43.99
ADJUSTABLE COMB TRANSFER PLATE – Marks the precise
location for the bushing holes
in the comb piece quickly and
easily. Before permanently
anchoring the base plate in
the pocket you've cut in the
stock, insert the transfer
plate with the points of the two, hardened steel punch screws
facing up. Position the comb piece on the stock, then press down
hard or rap it sharply with the heel of your hand to scribe the
exact hole locations. Depth of the scribe marks can be adjusted
by raising or lowering the punch screws with the included Allen
wrench. Transfer plate has tapped hole to accept screw-in plastic
knob, also included, for easy removal of plate.
SPECS: Aluminum, anodized, red or blue, depending on model.
350TP - 3½" (8.9cm) long, 1" (2.5cm) wide, ¼" (6.3mm) thick. 425TP
- 4¼" (10.8cm) long, 1" wide, ¼" thick. 870TP - Two, .870" (22.1mm)
diameter base plates, ¼" thick. 1000TP - Two, 1" diameter base
plates, ¼" thick. Each kit includes two adjustable punch screws,
Allen wrench, and removal knob.
#352-000-013AK 350TP Adjustable Comb Transfer Plate, 2E13D30. . . . . . . . . . . . . . . . . . . . . . . . . $ 20.00
#352-000-014AK 425TP Adjustable Comb Transfer Plate, 2E13D30. . . . . . . . . . . . . . . . . . . . . . . . . . 20.00
RECOIL-LESS ENGINEERING GUN NUT II
Customize Your Gun’s Length
Unique, buttstock anchor lets you
quickly adjust stock length by adding, removing, or switching spacers and recoil
pads. Steel-to-steel thread attachment
keeps pad from coming loose. Requires
drilling 1⁄4" x 11⁄4" holes in the buttstock
for the screw anchor. Spacers and recoil pads not included. a
b
SPECS: (2) Steel anchors, in-the-white. Approximately 1" (2.54cm)
long. (2) steel, panhead screws. Approximately 1" (2.54cm) long.
#763-000-001AK Gun Nut II 3F14X36. . . . . . . . . . . . . . $ 17.99
order on the web
www.brownells.com
Machined aluminum plates give a full 1" vertical and 1⁄2" horizontal left-right, plus 90° diagonal left-right adjustment. All adjustments are
accomplished through a single hole in pad. a
b
SPECS: Aluminum, anodized, black. Total thick3⁄
ness: .290" (7.4mm). Length: 5 4" (14.6cm). Width:
2" (5cm).
#365-000-001AK Pad Adjuster 5F68U31. . . . . . . . . . . . $ 74.99
GRACO
ADJUSTABLE BUTT PLATE
Adjusts For Length, Drop and Rotation
Three-way adjustments for perfect gun fit,
higher scores and improved shooting comfort.
Base plate mounts to gun, your pad mounts to
pad plate and the threaded tube provides a total
of 11⁄8" in/out adjustment. Make full turns or stop
the rotation anywhere in 360° and lock with the
socket head set screws. Slotted top plate allows
11⁄2" vertical adjustment. Slide a Breako recoil reducer (listed
elsewhere) into the tube for a neat, compact installation. Combine with Graco’s Adjustable Comb Hardware (listed elsewhere)
to make your own “Try Stock”. a
b
SPECS: Matte finished aluminum. 513⁄16" (14.7cm) long x 2" (5cm)
9⁄
wide x 16" (14.3mm) thick (adjusted fully “in”). Base plate attaching holes are 31⁄4" (82.5mm) center-to-center. Standard Model for
pumps, over/unders and side-by-sides has threaded tube centered
between attaching holes. Auto Model for Remington 1100, 11-87,
Beretta 302/303 etc., positions tube 1⁄2" (12.7mm) closer to top attaching hole to clear action spring tubes. Both require drilling 11⁄8"
(28.6mm) hole in stock.
#352-150-100AK Standard Adjustable Butt Plate, 2E49D99. . . . . . . . . . . . . . . . . . . . . . . . . $ 69.99
#352-150-101AK Auto Adj. Butt Plate 2E45D25. . . . . . 68.00
GRACO
ADJUSTABLE PAD PLATE
Complete Adjustment For The Perfect Fit
Two eccentric cams and multiple mounting hole
provide a huge range of adjustments for height, cast
and rotation. a
b
SPECS: Aluminum, matte finish. Stainless steel cams.
61⁄8" (15.5cm) high, 2" (5cm) wide. 11⁄2" (3.8cm) vertical,
.72" (18.2mm) horizontal. Adds 3⁄8" (9.5mm) to stock
length. Includes screws and hex wrenches.
#352-000-002AK Adjustable Pad Plate 2E36D50. . . . $ 55.95
SPEEDLOCK
ADJUSTABLE BUTT PLATE
Designed & Used By National
High-Power Champion, David Tubb
Gives full, four-way (length of pull, drop
at heel, height at comb and angle of stock)
adjustment to any rifle or shotgun with just
a quick turn of the wrench. Fully-ground,
beautifully-shaped fixture is ready to install and use. Includes black Pachmayr
Presentation pad. a
b
SPECS: Aluminum plates, black, rubber, recoil pad. 2" (5cm) wide, 53⁄8" (13cm) long, 33⁄8" center-to-center hole
spacing Adjustment Limits - + 13⁄4" (4.4cm) length of pull, - 3⁄4"
(19mm) drop at heel, + 3" (7.6cm) height at comb. 180° rotation
of angle of stock. 11⁄2 lb. (594 g) wt. Includes mounting screws.
#840-500-001AK Adjustable Butt Plate, 4H123A29. . . . . . . . . . . . . . . . . . . . . . . $ 150.99
View our How-To Video Guides at
brownells.com
BROWNELLS
. . . ONLY THE BEST . . . 431
PAGE stock adjusters
No permanent alterations necessary to your M4 or
Tapco T6 collapsible stock to add increased shooting
comfort, lower felt recoil, plus an additional 1⁄2" to
the length-of-pull. Rubber pad slips easily over the
plastic buttplate; held in position by rubber tabs and
a friction collar. Won’t shoot loose, stays put until
it’s removed. Great accessory for competitive shooters; raised, non-slip surface helps keep your rifle or
shotgun on-shoulder during long shooting strings or
moving courses of fire. a
b
SPECS: Rubber, black. Adds 1⁄2" (12.7mm) to length-of-pull. Fits
current M4 collapsible stock designs and Tapco T6 stocks.
#100-002-500AK Tapco M4/T6 Recoil Pad 5A10P99 . $ 11.99
Instant, inexpensive recoil protection for all
guns. Rubber pad fits snug to prevent sliding
around. Internal ribs for recoil absorption.
Brown or black.
SPECS: Small - Approximately 5" (12.7cm) x 15⁄8" (4.1cm); Medium
- Approximately 51⁄4" (13.3cm) x 13⁄4" (4.4cm); Large - Approximately
51⁄2" (14cm) x 17⁄8" (4.8cm).
STOCK # BROWN
STOCK # BLACK
SIZE
#690-901-001AK
#690-902-001AK
Small
#690-902-002AK
Medium
#690-901-002AK
#690-901-003AK
#690-902-003AK
Large
— Advise # — Rubber Slip-On Pad 2F09Y32. . . . . . . $ 13.99
CSP PAD ADJUSTER
Fast, Easy, Three-Way Adjustment
recoil pads
Slip-on recoil pad installs with ease to displace
painful shock and recoil. Transfers easily from
gun to gun and requires absolutely no fitting.
Made with proprietary NAVCOM™ material for a
soft feel and recoil absorbance. a
b
SPECS: NAVCOM synthetic material, black. Available in small,
medium, and large. Small - Approximately 45⁄8" (11.7cm) up to 5"
(13cm) high, 11⁄2" (3.8cm) wide. Small/Medium - approximately
45⁄8" (11.7cm) up to 51⁄8" (13cm) high, 13⁄4" (4.5cm) wide. Medium - 5"
(13cm) up to 51⁄4" (13.3cm) high, 15⁄8" (4.1cm) wide. Large - 51⁄4" up
to 51⁄2" (14cm) high, 13⁄4" (4.4cm) wide.
#902-000-079AK Small Slip-On Recoil Pad, 7K24Y69. . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
#100-002-653AK Small/Medium Slip-On Recoil Pad, 7K24Z69. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
#902-000-080AK Medium Slip-On Recoil Pad, 7K24Y69. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
#902-000-081AK Large Slip-On Recoil Pad, 7K24Y69. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
GRACO
ADJUSTABLE COMB HARDWARE
Fits All Guns
For Inexpensive Recoil Protection
STOCK WORK
Cushions Felt Recoil, Reduces Muzzle Jump;
No-Snag Design For Fast Shouldering
SLIP-ON RECOIL PAD
JONES STOCK ADJUSTER
recoil reducers
STOCK WORK
Fast, Hassle-Free Stock Adjustments
To Match Any Shooting Style
Give greater versatility to your shotgun or rifle with up to 1" vertical drop, 22°
left or right tilt, and 5⁄16" horizontal offset
of the recoil pad or buttstock position.
Ultra-thin, multi-position stock plates
add only 1⁄4", yet provide fast, easy, vertical, horizontal, and diagonal adjustments
of buttstock position to match changes in
shooting style, clothing, or shooting conditions. Machined steel thread inserts give fast recoil pad changes.
Completely pre-drilled, threaded, and made from easy-to-grind
aluminum. Browning model is pre-shaped and contoured to fit
the Browning Citori Plus and BT99. a
b
SPECS: Machined 6061T6 aluminum, anodized, black. Includes
mounting hardware and Allen wrenches. Standard Jones Adjuster - 53⁄4" (14.6cm) long, 2" (5cm) wide, 1⁄4" (6.3mm) thick. Fits
recoil pads with 31⁄8" c-to-c hole spacing. Browning Adjuster - 5.06"
(12.85cm) long, 1.835" (4.66cm) wide, .295" (7.5mm) thick, with
slotted lower screw hole for c-to-c spacing of 3.14" to 3.48" (7.97cm
to 8.84cm) on the stock side and 3.12" (7.92cm) on the pad side.
Fits Citori Plus and BT-99. Will not fit 525 Sporting Clays models.
#763-100-000AK Jones Stock Adjuster 3F51X32. . . . $ 64.99
#763-100-001AK Brwng Stock Adjuster 3F53X75. . . . . 67.99
THROUGH-THE-PAD STOCK ADJUSTER Unique coupling system between the plates
allows you to make adjustments without removing the recoil pad from the adjuster and
provides more precise horizontal, vertical, and
diagonal adjustability than the standard model.
Simply drill two small 5⁄16" to 3⁄8" diameter holes
in the pad, so you can insert the included Allen
wrench to loosen the two hex-head screws and
reposition the adjuster. Allows 17⁄16" vertical adjustment, 5/16" horizontal offset, and up to 40º left or right tilt.
SPECS: Machined 6061 aluminum, black, anodized finish. 511⁄16"
(14.5cm) long, 2" (5cm) wide, 13⁄32" (10mm) thick. Fits recoil pads
with 31⁄8" c-to-c hole spacing. Includes mounting hardware and Allen wrench.
#763-000-002AK Through-The-Pad Adjuster, 3F60X76. . . . . . . . . . . . . . . . . . . . . . . . . $ 75.99
THE STOCK SHOP SINGLE POINT
ADJUSTABLE BUTTPLATE
stock adjusters
Convenient, Easy To Adjust
Adjustable buttplate system has an
eccentric cam that lets you control the
position of the buttpad to produce a
precise, customized stock fit. Improves
shooter comfort and control for more
accurate shooting and higher scores.
Components come as flat, uncut aluminum plates, so you can custom-cut
for an exact fit to the stock. Accepts
Adjustable
Thin
all popular aftermarket recoil pads.
Thin model has a single hex head adjustment screw for setting buttpad
vertical and horizontal position, plus
rotation angle. Adds 1⁄4" to length of
pull. Adjustable LOP model adds two
stainless steel extension rods that proAdjustable (Installed) vide 2¾" length of pull adjustment and
plus/minus 15° of pitch. Field-tested
with over 20,000 shells in trap without a glitch. a
b
SPECS: 6061 aluminum, natural finish. 6" (15.2cm) long, 2" (5cm)
wide. 3" (7.6cm) c-to-c hole spacing. Includes installation hardware
and instructions. Thin – Adjustment range: 2" vertical, 1⁄4" lateral,
360° rotation. Adjustable LOP – Rods – stainless steel, polished
finish, 3" (7.6cm) long, 3⁄8" (9.5mm) dia. Adjustment range: 2¾"
(7cm) length of pull, 2" vertical, 3⁄8" lateral, 360° rotation.
#070-202-400AK Single Point Buttplate, Thin, 7K30A00. . . . . . . . . . . . . . . . . . . . . . . . . $ 37.50
#070-000-002AK Single Point Buttplate, Adj. LOP, 7K92A86. . . . . . . . . . . . . . . . . . . . . . . . . . 109.99
BROWNELLS PAGE 432
MORGAN ADJUSTABLE
RECOIL PAD
Customized Fit
For More Comfortable,
More Accurate Shooting
Get increased shooting comfort
and increased accuracy with the
original, adjustable pad. Separate,
Curved
Straight
ABS plastic plate with movable, foam
core pad makes your buttstock quickly and easily adjustable for stock pitch, drop and degree of recoil
absorption, so your gun fits and feels the way it should. Available
with either a smooth-face, curved, trap-style pad or a straight,
checkered-face, hunting-style pad. Installation requires only minor modifications. May require plugging and redrilling of pad/
buttplate screw holes. a
b
SPECS: Base Plate; ABS plastic, black. 51⁄4" (13.3cm) long x 17⁄8"
(4.8cm) wide. Pad; Rubber, black. 5" (10cm) long x 11⁄4" (3.1cm)
thick. Includes instructions and mounting screws.
#557-100-005AK Morgan Straight Pad, complete, 7E29B17. . . . . . . . . . . . . . . . . . . . . . . . . $ 42.99
#557-100-004AK Morgan Curved Pad, complete, 7E29B17. . . . . . . . . . . . . . . . . . . . . . . . . . 42.99
#557-100-105AK Straight Shoulder Pad, only, 7E20B29. . . . . . . . . . . . . . . . . . . . . . . . . . . 27.99
#557-100-106AK Curved Shoulder Pad, only, 7E21B23. . . . . . . . . . . . . . . . . . . . . . . . . . . 27.99
PREMIUM ADJUSTABLE RECOIL PAD - Premium
version with the same adjustability and contours
as the standard model, but with a CNC machined,
aluminum base plate for added strength and rigidity. Available with Short or Long base plate for
easy fitting to a variety of stock sizes.
SPECS: Base Plate - Machined aluminum, natural, polished finish. Short - 51⁄8" (13cm) long x 17⁄8"
(4.8cm) wide base plate. Long - 55⁄16" (13.5cm) long
x 17⁄8" wide base plate. Pad - Rubber, black. 5" (10cm)
long x 1¼" (3.1cm) thick. Includes screws and instructions.
#557-000-001AK Short Curved Premium Pad, 7E53B86. . . . . . . . . . . . . . . . . . . . . . . . . $ 66.99
#557-000-002AK Long Curved Premium Pad, 7E53B76. . . . . . . . . . . . . . . . . . . . . . . . . . 66.99
#557-000-003AK Short Straight Premium Pad, 7E53B86. . . . . . . . . . . . . . . . . . . . . . . . . . 66.99
#557-000-004AK Long Straight Premium Pad, 7E53B76. . . . . . . . . . . . . . . . . . . . . . . . . . 66.99
100 STRAIGHT
DEAD MULE RECOIL REDUCER
DANUSER COMP-COIL
Recoil Reduction System
Fits Most Semi-Autos
Short-cylinder system lets you put an effective
recoil reducer into most semi-auto rifles and shotguns; won’t interfere with the gun’s recoil system.
5⁄
16" of free travel provides a significant reduction
in felt recoil. Improves shooting comfort without
greatly affecting balance. a
b
SPECS: Steel spring cylinder, aluminum mounting
plates. Plates - 2" (5cm) wide, 6" (15.2cm) long. Requires drilling a hole 1" (2.5cm) dia 2" (5cm) deep in stock. 10.2oz.
(289 g). Kit includes installation hardware and instructions.
#232-101-000AK Danuser Comp-Coil 2C109Y99 . . . $ 119.99
EDWARDS
RECOIL REDUCER
Absorbs & Redirects Recoil
Put A Hydraulic Shock Absorber
Between Recoil & Your Shoulder
Easy-to-install, precision machined, hydraulic
unit can improve the comfort of any rifle or shotgun
without huge increases in weight or changes in gun's
natural balance. Uses smooth, quiet, hydraulic shock
absorber action to counteract and soften up to 52% of the actual
recoil force. Helps improve accuracy because the shooter can
maintain concentration on the target and not on painful recoil.
Hydraulic dampening effect is quickly adjustable to match both
the needs of the shooter and the recoil of the gun. a
b
SPECS: Aluminum plates, brass cylinder. Plates - 2" (5cm) wide, 6"
1⁄
(15.2cm) high. Cylinder - 3 8" (7.9cm) long, 1" (2.5cm) dia. 12 oz. (340
g) wt. Requires shortening of stock. Adds 1.25" (3.1cm) to length
of pull. Kit includes installation hardware, complete instructions.
#232-100-000AK Danuser Counter Coil 2C192Y96. $ 199.99
COUNTER COIL ADJUSTABLE - All the great
features of the Counter Coil with the addition
of two, rotating cams to provide a full range of
adjustment. Lets you easily set vertical and horizontal plus, left and right cant to fit your needs.
SPECS: Aluminum plates, brass cylinder. Plates
- 2" (5cm) wide, 6" (15.2cm) high. Cylinder - 31⁄8"
(7.9cm) long, 1" (2.5cm) diameter 12 oz. (340 g) wt.
Requires shortening of stock. Adds 1.25" (3.1cm)
to length of pull. Kit includes installation hardware,
complete instructions.
#232-000-001AK Adj. Counter Coil 2C254Y99. . . . . $ 269.99
Aluminum cylinder with
springs and piston absorbs recoil to minimize barrel bounce.
Fits drawbolt hole in shotgun buttstock or, drill a hole in rifle
stocks. Adjustable model directs felt recoil away from your
cheek. 3" model fits Krieghoff and others with adjustable pads
and combs. a
b
SPECS: Aluminum, silver. 3" (7.62cm) long, 6 oz. wt., 31⁄2" (8.9cm)
long, 6 oz. wt., 4" (10.2cm) long, 6 oz. wt. Non-adjustable - 7⁄8"
(22.2mm) diameter. Adjustable - 1" (2.5cm) diameter.
STOCK#
LENGTH ADJUSTABLE
PRICE
3"
Adj.
#100-000-311AK
3K36A67 $ 60.00
#100-000-312AK
3"
Non-Adj.
3K33A00 $ 55.00
#100-000-313AK
31⁄2"
Adj.
3K36A67 $ 60.00
#100-000-314AK
31⁄2"
Non-Adj.
3K33A00 $ 55.00
4"
Adj.
#100-000-315AK
3K36A67 $ 60.00
4"
Non-Adj.
#100-000-316AK
3K33A00 $ 55.00
“THE MAX” RECOIL REDUCERExtra-length provides maximum
recoil reduction for magnum rifles
and shotguns. 7⁄8" diameter works in
bored holes or drawbolt channels of
wood stocks, easily glued into synthetics. .
SPECS: Aluminum, polished finish. 5" (12.7cm) long x 7⁄8" (2.2cm)
diameter. 7.5 oz. (213g) wt.
#100-001-949AK The MAX Recoil Reducer, 3K40H00. . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
C&H RESEARCH
MERCURY RECOIL SUPPRESSOR
Chamber
Model
Stock
Model
Uses Inertia To Absorb Painful Recoil
Can't Kick
Mechanical piston reduces felt recoil without changing the
point of impact. Fits in any buttstock with a 7⁄8" dia. x 41⁄2" deep
stock bolt hole. a
b
SPECS: Steel body. 7⁄8" (22mm) diameter, 41⁄2" (11cm) long.
#365-509-100AK Dead Mule Stock Model 5F59P99. . $ 66.99
DANUSER
COUNTER COIL®
RECOIL REDUCER
Helps counteract the painful effects of recoil using mercury,
one of the heaviest, densest, liquid elements. Compact, permanently-sealed, steel case is made from bar stock; the only moving
part is the liquid mercury so there’s no wear, no chance of leaks.
Mercury's viscosity varies only 1% from 0° F. to 90° F. which
means the recoil-fighting performance is consistent in almost all
weather conditions. Stock Models fit in rifle or shotgun stocks
and are drilled and tapped 1⁄4"-28 tpi for easy installation and removal. Clamp-On models include a sturdy, black anodized, nonmarking, aluminum clamp for instant installation onto barrels
.780" to .950" in diameter. Chamber model is attached to a 12
gauge chamber snap cap and drops into the unused barrel of an
O/U when shooting singles. Magazine Tube fits into the 4-round
magazine tube of a pump or semi-auto shotgun. Replaces the
migratory bird plug. Includes nylon spring seat adapters for 12
gauge guns, also fits 20 gauge shotguns with adapters removed.
Benelli Super - Replaces magazine cap. Benelli Montefeltro Threads onto the bolt extending from front of magazine. Beretta
390 and 391 - Replaces the magazine cap. T-Handle - Makes it
really easy to install and remove all stock models. a
b
SPECS: Machined, stainless steel tubes. Short Stock - 3" - 3"
(7.6cm) x .875" (22mm) dia., 8 oz. (227 g) wt. Standard Stock - 4"
A - 4" (10cm) x .875" dia., 11 oz. (312 g) wt., 4" B - 4" (10cm) x 3⁄4"
(19mm). Standard Stock - 4.25" B - 4.25" (10.6cm) x 11⁄16" (17mm).
SINCE 1939
Standard Stock - 5" A - 5" (12.7cm) x .750" (19mm) dia., 11 oz. wt.,
5" B - 5" (12.7cm) x 7⁄8" (22mm). Clamp-On 6 oz. - 2" (5cm) long x
.750" dia., 6 oz. (170 g) wt. Clamp-On 8 oz. - 3" long x .750" dia., 8
oz. (227 g) wt. Chamber - 5" long x .750" dia., 11 oz. wt. Magazine
Tube - 5" (12.7cm) long x .750" (19mm) dia., 11 oz. wt. Benelli Super - Flat black finish, fits Super Black Eagle and M1 Super 90, 41⁄2"
(11.4cm) long, 81⁄2 oz. (241 g) wt. Benelli Montefeltro - Flat black
finish, fits Montefeltro, Legacy, Sport, Competition. 4" (10cm) long,
8 oz. (227 g) wt. Beretta 390 - 3.6" (9.1cm) long x .49" (1.24cm). 8.2
oz. (232 g) wt. Beretta 391 - 4" (10.1cm) long x .750" (19mm) dia.
8.4 oz. (234 g). T-Handle - Aluminum handle, stainless steel shaft.
1⁄
4 -28 threads, 3.25" (8.2cm) x 6" (15.2cm).
#163-100-004AK Short Stock Recoil Suppressor, 3F42X78. . . . . . . . . . . . . . . . . . . . . . . . . $ 50.00
#163-100-002AK Standard Stock 4" A Recoil Suppressor, 3F42X78. . . . . . . . . . . . . . . . . . . . . . . . . . 50.00
#163-000-006AK Standard Stock 4" B Recoil Suppressor, 3F42X78. . . . . . . . . . . . . . . . . . . . . . . . . . 50.00
#163-000-005AK Standard Stock 4.25" Recoil Suppressor, 3F42X78. . . . . . . . . . . . . . . . . . . . . . . . . . 50.00
#163-000-004AK Standard Stock 5" A Recoil Suppressor, 3F42X78. . . . . . . . . . . . . . . . . . . . . . . . . . 50.00
#163-000-007AK Standard Stock 5" B Recoil Suppressor, 3F42X78. . . . . . . . . . . . . . . . . . . . . . . . . . 50.00
#163-101-006AK Clamp-On 6 oz. Recoil Suppressor, 3F49X62. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-101-008AK Clamp-On 8 oz. Recoil Suppressor, 3F49X62. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-100-003AK Chamber Recoil Suppressor, 3F49X62. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-100-001AK Magazine Tube Recoil Suppressor, 3F49X62. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-000-001AK Benelli Super Recoil Suppressor, 3F55X31. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-000-002AK Benelli Montefeltro Recoil Suppressor, 3F56X21. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-100-007AK Beretta 390 Recoil Suppressor, 3F49X62. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-000-003AK Beretta 391 Recoil Suppressor, 3F49X62. . . . . . . . . . . . . . . . . . . . . . . . . . 65.00
#163-100-000AK Recoil Suppressor T-Handle, 3F09X09. . . . . . . . . . . . . . . . . . . . . . . . . . 20.00
Cannot ship outside Continental U.S. Shipped UPS Ground only within U.S.
ENIDINE TACTICAL SHOTGUN
SHOT SHOCK RECOIL REDUCER
Telescoping, hydraulic energy
absorber reduces felt recoil by as
much as 70% on a tactical shotgun
fitted with an AR-15/M4 collapsible stock. Lower recoil gives you
better control for faster sight recovery and faster, more accurate
follow-up shots. Self-contained, one-piece assembly replaces the
receiver extension tube and provides five locking positions for
adjustable buttstock. Fits any aftermarket stock adapter with a
13/16-16 UN thread and accepts any factory or aftermarket buttstock that fits a mil-spec M4 buffer tube. Installs in minutes,
using the existing end plate and lock nut. a
b
SPECS: Steel, matte black finish. 8" (20.3cm) long, 11⁄8" (2.9cm)
O.D. 13.5 oz. (383g) weight. Requires stock adapter, end plate, and
receiver extension lock nut.
#100-003-049AK Shot Shock Recoil Reducer, 4A118Z60. . . . . . . . . . . . . . . . . . . . . . . $ 147.99
RECOIL REDUCTION SYSTEM
Mercury-Filled, Controls Recoil, Increases Comfort
BERETTA 390 & 391 MERCURY SYSTEM - Mercury filled tube
and cap replace the forearm cap nut; provide increased recoil
reduction and more weight on the forend for a smoother swing
and follow through. No alterations to the shotgun required.
SPECS: Steel, blue, matte finish. 31⁄4" (8.2cm) long, .872" (22mm)
diameter, 10.6 oz. (300 g) wt.
#352-200-390AK Beretta 390 System 2E43D56 . . . . . $ 65.99
#352-000-004AK Beretta 391 System 2E50D86 . . . . . . . 76.99
RIFLE MERCURY SYSTEM - Smaller diameter, sealed, mercuryfilled cylinder can be inletted
into rifle forearms. Combine with
Standard 4" unit in the buttstock
to tame recoil on magnum rifles
and help keep the rifle “balanced”.
SPECS: 5" (12.7mm) long, .574"
(14.5mm) diameter. 8 oz. (227 g). Installation requires alteration
to forearm.
#352-205-000AK Rifle Mercury System, 2E39D99. . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99
GRACO
RECOIL REDUCER DRILL FIXTURE
Inlets Buttstocks For
Tubular Recoil Reducers
Everything you need
to drill straight, correctly located and centered
holes in buttstocks for
installing 7⁄8" diameter,
tubular recoil reducers.
Steel fixture saves you
hours of “eye-balling”
and trial and error, so you can provide your customers a valuable service at a reasonable cost, while still earning a decent
profit. Sturdy, blued steel locating plate attaches to buttstock
using the gun’s existing recoil pad screws and is slotted to adjust
to any screw hole spacing. Nylon-lined guide bushing keeps the
hardened tool steel 7⁄8" Forstner drill bit centered, and stop collar
locks onto bit shank to prevent drilling too deep on the first pass.
Once hole is started, remove the locating plate and use the drill
bit and guide bushing to drill the rest of the way. a
b
SPECS: Steel, blue finish. Includes locating plate, drill guide bushing, 7⁄8" (2.2cm) diameter Forstner bit, stop collar with setscrews,
Allen wrench, and complete instructions.
#352-000-009AK Recoil Reducer Drill Fixture, 2E56D25. . . . . . . . . . . . . . . . . . . . . . . . . $ 80.00
UNIVERSAL MERCURY SYSTEM - Fits a wide selection of rifles
and shotguns. Compact size fits
in buttstocks or magazine tubes.
Special screw allows fitting to
forearm caps on most shotguns.
Requires drilling a 5⁄16" hole in
cap. Nicely blued and polished to
match the finish on most guns.
SPECS: 3" (7.6cm) long, .840" (21mm) dia. 8 oz. (227 g) weight.
#352-000-003AK Universal Mercury System, 2E39D00. . . . . . . . . . . . . . . . . . . . . . . . . $ 59.00
Cannot ship outside Continental U.S. Shipped UPS Ground only within U.S.
Stainless steel piston riding in a teflon sleeve
smoothly softens recoil. Improves comfort and
concentration for more accurate shooting. Adjustable friction spring lets you fine tune the
dampening effect for heavy and light loads.
Buttplate has a wide range of vertical and
horizontal adjustments. Pad plate is drilled and
tapped for standard recoil pads. a
b
GRACOIL STANDARD - Vertical and horizontal
adjustments for drop and cast improve stock fit
and increase shooting comfort. Thin, pad mounting plates prevent compression pinching and minimize amount of material to
be removed for easier fitting. Rifle Recoil Reducer has a stronger compression rate to accomodate the punchier recoil of rifles,
and guide pins and mounting screw holes are closer together to
accomodate smaller rifle stocks. Also recommended for heavier
recoiling 3" and 31⁄2" magnum shotguns.
SPECS: Aluminum, natural matte finish. 61⁄8" (15.5cm) high, 2"
(5cm) wide. Adjustments - 11⁄2" (3.8cm) vertical, 3⁄4 " (18.2mm)
horizontal, 360 degree rotation. 5⁄16" (7.9mm) stroke. Adds 1" (2.5cm)
to length of pull. May require shortening stock.
#352-110-000AK GraCoil Std. Shotgun Recoil Reducer, 2E155D95. . . . . . . . . . . . . . . . . . . . . . . $ 179.99
#352-000-010AK GraCoil Std. Rifle Recoil Reducer, 2E155D95. . . . . . . . . . . . . . . . . . . . . . . . 179.99
GRACOIL ADJUSTABLE LENGTH OF PULL Quickly gives up to 3⁄4" adjustment for length of
pull plus drop and cast adjustments. Improves
stock fit to accommodate different shooting
styles. Provides correct fit when wearing heavy
or light clothing. Allows two shooters to use the
same gun with equal comfort.
SPECS: Aluminum, matte finish. 61⁄8" (15.5cm)
high, 2" (5cm) wide. Adjustments - 11⁄2" (3.8cm)
vertical, .72" (18.2mm) horizontal, 360° rotation.
5⁄
16" (7.9mm) stroke. Adds 1" (2.5cm) to length of
pull. May require shortening stock.
#352-000-001AK Adj. LOP Recoil Reducer, 2E217D65. . . . . . . . . . . . . . . . . . . . . . . $ 269.99
ADJUSTABLE BUTT PLATE DRILLING FIXTURE - Prevents
crooked or off-center holes and ensures
correct hole spacing. Use Adjustable to
install Graco Adjustable Butt Plates
#575A and #575S. GraCoil for installing GraCoil Recoil Reducer, with separate fixtures for Rifle and
Shotgun.
SPECS: Steel, blue finish. Includes guide plate, drill guide bushing
and 11⁄8" Forstner bit. GraCoil also includes 3⁄8" guide pin drill bit.
#352-000-006AK Adjustable Plate Fixture, 2E56D25. . . . . . . . . . . . . . . . . . . . . . . . . $ 80.00
#352-000-007AK GraCoil Shotgun Fixture, 2E56D25. . . . . . . . . . . . . . . . . . . . . . . . . . 80.00
#352-000-011AK GraCoil Rifle Fixture 2E56D25. . . . . 80.00
UNIVERSAL FITTING FIXTURE Firmly secures GraCoil, Graco Adjustable Butt Plates, recoil pads, or other
butt plate hardware while cutting and
grinding to proper size and contours.
Unique design lets you remove most of
the excess material quickly with a band
saw, while preventing damage to the
part caused by excessive heat buildup
from prolonged grinding. Allows you to
set the correct heel and toe angles of
butt pads and hold them while grinding. Multiple screw holes
in the mounting plates provide compatibility almost all types of
hardware and recoil pads.
SPECS: Aluminum, anodized, matte red. 4" (10.2cm) long, 11⁄2"
(3.8cm) wide, 113⁄16" (4.6cm) high. Includes mounting hardware
and Allen wrench.
#352-000-012AK GraCoil Universal Fitting Fixture, 2E39D99. . . . . . . . . . . . . . . . . . . . . . . . . $ 55.99
order on the web
www.brownells.com
B&R RECOIL PAD
FITTING JIG
Lets You Do Fast, Professional,
No-Mar Pad Installation
One of the most difficult aspects of
fitting a recoil pad has always been
the final fitting of pad to wood because
it is so easy to hit the stock with the
disc, sanding strip, or file - and ruin the
finish. The B&R Recoil Pad Fitting Jig
removes the risk of stock damage by
letting you finish the pad completely
off - and away from - the stock. a
b
The Jig is composed of two basic
pieces: (1) an adjustable triangle on
which the pad is mounted to be dressed to size,
and (2) a universal support that attaches to the
sanding disc table.
Operation is simple. First, cut the stock to the
length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the
outline of the stock on the pad. Then transfer the
pad to the base plate of the Jig, set the angle of
pitch, put the Jig on its support, and dress the
pad to the point of just removing the scribed line
(this is necessary as the line was drawn outside
the stock). Finally, test fit the pad to the stock
and do any final dressing by hand, if needed. The
lines of the stock are carried correctly into the pad - and you
have a perfect fit!
The Jig eliminates all damage to the stock finish and reduces
the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.
SPECS: Steel support is 201⁄4" (51.4cm) long. Steel triangle legs
are approximately 111⁄4" (29.2cm) long. Aluminum base plate is 31⁄2"
(9cm) long. Includes instructions.
#080-000-868AK B&R Recoil Pad Fitting Jig, 8K00ZAY. . . . . . . . . . . . . . . . . . . . . . . . $ 125.95
Brownells
PULL & DROP GAUGE
Fast, Accurate Measurements For Stock Fitting
Proper stock “Pull” is one of those gun functions
that is vitally important to the owner’s shooting
proficiency, yet few shooters understand what it
is, or why a stock may either fit right out of the box,
or have to be lengthened or shortened to fit him
personally. To find the correct pull for a customer,
you must measure him! Our Pull & Drop Gauge,
beautifully made of oil finished solid cherry, is a
professionally designed tool to do two important
jobs: 1) Accurately and quickly measure the pull
and drop of the shooter’s forearm and triggerfinger. 2) Add professionalism and authenticity to
your explanation of “Pull and Drop” to increase
sales, and to generate interest in correct pull and
drop for more custom fitting jobs. a
b
SPECS: Long “Leg” is 24" (61.0cm) long x 13⁄8"
3⁄
(3.5cm) wide x 8" (9.5mm) thick. Short “Leg” is 6"
(15.2cm) long x 13⁄16" (3.1cm) wide x 7⁄8" (22.2mm)
thick.
See Chapter 22 of Ralph Walker’s The Gun Digest Book Of
Shotgun Gunsmithing for a detailed article on use of Brownells
Pull & Drop Gauge.
#080-033-000AK Pull & Drop Gauge 9A30H65. . . . . . $ 40.85
DROP AT HEEL
BROWNELLS
. . . ONLY THE BEST . . . LENGTH OF PULL
433
PAGE fitting jigs & gauges
Lessens the effects of felt recoil to improve your scores; lets
you concentrate on your shooting, not on a bruised shoulder.
Permanently sealed cylinders contain mercury that resists recoil to absorb shock. Provides even more "cushion" for medium to
heavy shotgun loads and magnum rifles. Shorter skeet model for
maximum recoil control when shooting skeet and sporting clays.
Fits in the draw bolt hole. May require drilling one 7⁄8" diameter
hole in some stocks. a
b
SPECS: 7⁄8" (22mm) diameter. Standard; 4" (10.1cm) long, 13 oz.
(369 g). Skeet; 3" (7.6cm) long, 9 oz. (255 g) wt.
#352-200-101AK Breako Std System 2E44D37 . . . . . $ 63.99
#352-200-102AK Breako Skeet System 2E35D25 . . . . 53.00
Adjustable, buttstock-mounted recoil absorption system transforms recoil from a sharp, painful slap to a slow, manageable push. Ideal for
beginners, youth, and smaller-statured shooters,
the Auto-Buster prevents bad habits, like flinching or lifting your head to avoid recoil, from starting in the first place and helps experienced shooters overcome them. May be installed on a wide
range of rifles and shotguns, including semi-auto
competition shotguns, with minimal protrusion
into the stock. Dual machined aluminum buttplates contain an exclusive spring system that
allows the shooter to customize the amount of recoil reduction
by selecting interchangeable Light, Medium, and Heavy tension
springs (included). Rear plate is adjustable for drop at heel and
360° rotation simply by loosening and tightening a single Allen
head bolt. Comes drilled and tapped to accept a wide variety of
aftermarket recoil pads with 31⁄8" center-to-center hole spacing.
Gunsmith installation recommended; requires removal of existing buttpad or plate and shortening the stock. a
b
SPECS: Body - machined aluminum, natural silver finish. Guide/
1⁄
Spring System - stainless steel. 6 8" (15.5cm) tall, 2" (5cm) wide, 12
oz. (340g) weight. Includes light, medium, and heavy spring sets,
mounting hardware, Allen wrenches, and installation instructions.
#100-004-743AK Auto Buster Recoil Reduction System, 9D269Y99. . . . . . . . . . . . . . . . . . . . . . . $ 309.99
Fully Adjustable Spring System
Cushions Your Shoulder
Brownells
recoil reducers
GRACO
Buttstock-Mounted System
Tames Felt Recoil;
Increases Shooter Comfort & Control
GRACOIL RECOIL REDUCER
STOCK WORK
Hydraulic Action Tames
Felt Recoil Of Shotguns
With Adjustable AR-15 Stocks
GRACO
SPEEDBUMP STOCKWORKS KEN RUCKER’S AUTO-BUSTER™
RECOIL REDUCTION SYSTEM
STOCK WORK
ROBERT LOUIS CO.
MOLIBALLISTICS
SHOTGUN COMBO GAUGE
STOCK BENDING JIG
Gun and rest not included
Gives You Precise Measurements For A Perfect Fit
JERRY FISHER CUSTOM STOCK
TEMPLATE
fitting jigs & gauges
Full-Scale Dimensions
For Duplicating
Classic Designs
Full-scale templates
by master stock maker
Jerry Fisher allow you to
duplicate his classic stock
designs. Features critical
dimensions that are almost impossible to measure accurately from
an actual stock for easy layout on your favorite blank or an existing
stock. Great reference source and starting point for designing your
own custom rifle stock. Mauser 98 is a lightweight sporter design
for 22" barrels, measured from the bolt face, with .525" maximum
muzzle O.D. Winchester M70 is a medium weight sporter stock for
long actions with 22" to 24" barrels.
SPECS: Heavy paper. 35" (89cm) long x 23" (58cm) wide. Mauser
98 - Stock dimensions: 13½" (34.3cm) length-of-pull, 5⁄8" (16mm)
drop-at-comb, ¾" (19mm) drop-at-heel, 2½" (6.3cm) pitch-down.
Winchester M70 - Stock dimensions: 13½" length-of-pull, ½"
(13mm) drop-at-comb, 5⁄8" drop-at-heel, 2½" pitch-down.
#310-000-001AK Mauser 98 Template 1C20H27. . . . . $ 24.99
#310-000-002AK Winchester 70 Template, 1C20H27. . . . . . . . . . . . . . . . . . . . . . . . . . 24.99
PACHMAYR RECOIL PAD
GRINDING TEMPLATES
Prevents Grinding Into Steel
Reinforcement Plates
Brass templates lets you know where
the steel reinforcement plates are in all
closed-side Pachmayr recoil pads to keep
you from cutting into them when shaping a recoil pad. Place the
template behind the new pad and visibly check the amount of
clearance left while shaping. Set of four templates work with
small, medium, large, and large magnum recoil pads. a
b
SPECS: Brass templates. Set of four for small, medium, large and
large magnum Pachmayr recoil pads.
#690-000-019AK Recoil Pad Grinding Templates, 2F15V99. . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99
B
ROWNELLS
434
PAGE Uses Heat & Gentle Pressure
To Make Custom
Stock Adjustments
Precision jig helps you gently bend a shotgun or rifle stock
to change cast-on/cast-off, and add or remove drop. Eliminates
the messy, “hot oil” method traditionally used to bend stocks.
On most jobs, you won’t even have to refinish or re-checker the
stock. Uses heat provided by two, high-intensity, infra-red heat
lamps commonly available at hardware and home center stores
(not included) to soften the wood, while the screw jacks let you
slowly, incrementally mold the stock for a custom fit to a particular shooter. After determining the adjustments to be made,
clamp the stock securely in the jig, turn on the heat lamps for
approximately 5 hours, and when the wood has softened, tighten
the jacks to start bending. The key is to stop as soon as you encounter resistance and let the lamps continue to heat and soften
the stock before tightening the jacks more. Using the jig requires
relatively little actual work time; most of the time, the jig is
working while you’re doing something else. Steel components,
with a rigid plywood base. Can be wall mounted. a
b
SPECS: Steel and wood. Approximately 41" (104cm) long, 10"
(25.4cm) wide, 17½" (44.4cm) high. Approximately 38 lbs. (14kg)
weight. Requires 110-120 volt AC power supply. Instructions included.
#100-006-335AK Stock Bending Jig 6C00VBX. . . . . $ 895.00
DEM-BART STOCK & CHECKER OIL
CHECKERING TOOL FINGER REST
Handle & Cutter not included
Lightweight, aluminum gauge measures length of pull, drop
at comb and heel, and angle of pitch to give a precise fit. Units of
measurement are in bold, easy-to-read numbers in both inches
and metric for world-wide use. Measures length of pull to 24"
and has an overall length of 29.5". With a length of 28", you
can accurately measure drop. Optional 23" Magnetic Extension
“glues” the Shotgun Combo Gauge to the rib or barrel using a
magnet for hands-free operation. Extension adds 20" to steady
the tool for easy drop measurement. Plastic protractor measures
180 degrees of pitch. a
b
SPECS: Shotgun Combo Gauge - Aluminum. Overall length
28" (71cm) Magnetic Extension - Aluminum. Overall length 23"
(58.5cm).
#100-002-154AK Shotgun Combo Gauge, 9A103X16. . . . . . . . . . . . . . . . . . . . . . . $ 128.95
#100-002-155AK Magnetic Extension, 9A54X63. . . . . . . . . . . . . . . . . . . . . . . . . . 68.00
checkering supplies
Brownells
Delivers Added
Comfort & Better
Control
Polished,
grooved
finger rest improves
comfort and control
of any checkering tool
with a square shank
1⁄
8" wide or smaller. Anchors firmly in place with two set screws,
yet repositions easily. Great for bent needle files, too. a
b
SPECS: Aluminum. 1⁄2" (1.3cm) dia. x 5⁄16" (8mm) thick. Fits checkering tools with 1⁄8" (3.2mm) wide or less square shank.
#084-000-236AK Finger Rest, 5-pak, 4H15D98. . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99
THE “JOINTER”
Saves The Day
When A Line
Starts Astray!
A tool that’s not
often used until it is needed - and then it’s the most necessary
checkering tool you can own! Its main purpose is to straighten
out checkering lines which have gone astray, and to make layout
and other lines really straight. There isn’t a checkerer alive, pro
or rank novice, who, at one time or another, hasn’t had a line suddenly head for left field. Straightening out such a line - without
a Jointer Tool - can easily drive you right up the wall! A “musthave” for the beginner or professional checkerer. b
a
SPECS: Tool Steel, the right hardness so you can resharpen
with 60° 3-square file, 7⁄8" (22.2mm) cutting area, 90° only.
#080-556-000AK Jointer Tool 8K19H58. . . . . . . . . . . . $ 25.99
NO. 131 CHECKERING RIFFLER
PROJX STOCKMAKER’S FIT BOARD
For Fitting
Over/Under
Shotguns
DEM-BART CHECKERING GAUGE
Fast, Accurate
Determination
Of Checkering Size
Easy-to-use template
identifies
checkering
spacings from 16 to 32 lines-per-inch. Place over pattern to
be measured and match the lines on the proper scale. Oblique
diamond shape helps provide accurate determination of layout
lines. a
b
SPECS: 9" (22.9cm) x 23⁄4" (7cm).
#241-000-001AK Checkering Gauge, 1D03Z87. . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99
Checkering Rifflers are used by many professional checkerers and stockmakers instead of bent needle files for pointing-up
checkering, cleaning up damaged or old checkering, and border
work. The No. 131 we recommend and carry has a full 3-square
shape, cutting a perfect 60° angle. File teeth meet exactly square
on corners, will cut finest hairline cut at bottom of diamond
grooves. Has approximately 35° up-bend at tip. Exceedingly
nice to work with.
SPECS: 6" (12.7cm) long. “V” is 60°. Approx. 1" (2.5cm) edge.
#360-318-971AK No. 131 Checkering Riffler, 6C00AVB. . . . . . . . . . . . . . . . . . . . . . . . $ 32.99
Brownells WOOD STIPPLING
PUNCHES
Fast Alternate To
Checkering
Create a no-slip gripping
surface on a stock, forend
or handgun grip in far
less time than it takes to
lay out and checker an area. Sharply pointed cutting diamonds in
12, 16 or 20 lines per inch let you choose from coarse, medium or
fine patterns. b
a
SPECS: Steel, blued. 3⁄8" (9.5mm) diameter. 5" (12.7cm) long.
#080-061-012AK 12 lpi Stippling Punch, 8K20A80. . . . . . . . . . . . . . . . . . . . . . . . . $ 25.99
#080-061-016AK 16 lpi Stippling Punch, 8K17A95. . . . . . . . . . . . . . . . . . . . . . . . . . 22.45
#080-061-020AK 20 lpi Stippling Punch, 8K21A22. . . . . . . . . . . . . . . . . . . . . . . . . . 24.99
SINCE 1939
Cannot ship outside Continental U.S. Shipped UPS or FedEx Ground only within U.S.
Brownells
CHECKERING RESTORATION KIT
Everything You
Need To Bring Old
Checkering Back
To Life
Restoring a vintage stock, or one
that’s seen a lot of
action in the duck
blind or deer woods, just got a lot easier! We’ve put together a kit
that has the tools and oil you need to sharpen up dull, rounded
off checkering and really bring it back to life. Kit includes a
pre-assembled Dem-Bart F1 cutter with handle and shank for
single-line restoration, a 90° veiner for touching up intricate
lines and designs, a Brownells Hand Carving Knife for restoring lines, and a 2 ounce jar of Dem-Bart Stock & Checker Oil
for protecting the final restoration. Also included are a Gunline
Ruler for precise line spacing and a Brownells Nylon Brush for
removing dust and grime without marring the wood. Complete
instructions included. a
b
SPECS: Kit contains one each of the following: F1 cutter with handle and shank, 90° veiner, hand carving knife, 2 oz. (59ml) stock &
checker oil, Gunline ruler, nylon brush, and instructions.
#080-000-363AK Restoration Kit 8K46V05. . . . . . . . . $ 73.99
Brownells CHECKERING CRADLE
Shapes The Diamonds Smoothly, Professionally
Innovative,
easy-to-use
board take’s
the
guesswork out of
fitting shotguns to customers. Simply lay your shotgun on the
board and read the length of pull, drop at comb, cast off/on and
pitch for all over/under shotguns with barrels up to 30" in length.
Bench sized template with large, easy-to-read numbers makes a
tough job easy. Heavy-duty, laminated paper is resistant to most
solvents. Rolls up for convenient storage.
SPECS: Laminated template. 53½" (136cm) long x 24½" (62cm)
wide. Fits over/under shotguns with barrels up to 30" long.
#100-004-269AK Stockmaker’s Fit Board, 5B48Y15. . . . . . . . . . . . . . . . . . . . . . . . . $ 59.99
Seals & Protects Freshly Cut Checkering
Waterproof, low sheen, London-type oil finish is
ultra thin to soak in deep and seal the open poors
after checkering. Brush in, brush out excess and
the wood is sealed and protected. Will not plug up
the diamonds or become yellowish in time. Contains no silicas or pigment fillers. a
b
SPECS: 2 fl. oz. (59 ml) net contents jar.
#241-820-002AK Checkering Oil 1D05P36. . . . . . . . . . . $ 7.99
Locks All Stocks In Best Position
For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so
much better - that we have never met a professional stockmaker
who did not use a checkering cradle! Two of the most important
advantages of a good cradle are: 1) It allows you to work with
both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable position.
This eliminates the clumsy and difficult task of trying to work
around a stationary stock and following the pattern correctly
from border to border. 2) Prevents the back and forth wobble
that kills the cutting action of the checkering tools. If the stock
is not securely held, it will move with the cutter. This movement
lets the cutter “grab” the stock and makes it almost impossible
to cut straight, even lines of uniform depth. Simple in design,
low in cost, of rugged wood construction and highly practical.
Adjustable to hold rifle stocks up to 33" long (which will include
all stocks except Mannlicher-style) and all shotgun stocks and
forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also
for stock inletting, sanding, staining and finishing. Bolt directly
to the bench, or lock into a sturdy vise. Comes complete with all
holders, bolts and instructions. a
b
SPECS: 411⁄2" (105cm) long, 8 1⁄4" (21cm) high, 11⁄2" (3.8cm) wide.
#080-026-000AK Checkering Cradle 2E63H53. . . . . . $ 87.99
DEM-BART CHECKERING SETS
GUNLINE CHECKERING SETS
PREMIER SET
CAMP PERRY SET
Complete, Professional Quality
The “Works” Set
For Beginners & Pros
Everything you need to start
checkering including detailed instructions and sample patterns.
Cutters fit all Gunline handles. a
b
SPECS: Set includes 6 complete
tools: 2-Edge Spacer, 3-Edge Spacer, Border-Vex, V-Edger, PointerLong, Veiner, JT 60° Jointer, Pinsetter, Rule Gauge, Patterns and
Instructions.
#364-900-016AK 16 LPI Premier Set 4F120U36. . . . $ 139.99
#364-900-018AK 18 LPI Premier Set 4F120U36. . . . . 139.99
LEADER SET
Do any checkering job from layout to
finish, simple to complex patterns, in
all woods. Six complete tools; Offset and
Standard handles with the proper cutters and accessories to ensure success. b
a
SPECS: Includes: 2-Edge Spacer, 3-Edge
Spacer, Border-Vex, V-Edger, Pointer-Long, Veiner, Checkerer’s
Rule, Layout Gauge, Patterns and Illustrated Instructions. 60° spacers, 90° cutters.
STOCK #
LPI
STOCK #
LPI
STOCK #
LPI
#364-600-616AK 16 #364-600-618AK 18
#364-600-620AK 20
#364-600-622AK 22 #364-600-624AK 24
— Advise # — Camp Perry Set 4F94C48. . . . . . . . $ 109.99
#364-004-000AK Checkerer’s Rule 4F02P99. . . . . . . . . . 3.99
GUNLINE HANDLES
A Great Starter Set
STOCK #
LPI
STOCK #
LPI
#364-500-516AK 16
#364-500-524AK 24
#364-500-518AK 18
#364-500-528AK 28
#364-500-520AK 20
— Advise # — Leader Set 4F55H67. . . . . . . . . . . . . . . $ 64.99
GUNLINE REPLACEMENT CUTTERS
No. SE THREE-EDGE SPACER - Reversible - Two “no
teeth” edges follow last two rows cut. Cuts in right or
left direction. 60°. See chart for lpi Stock # and price.
No. SD TWO-EDGE SPACER - One cutting edge, one
safe edge follows last row cut. Reversible, cuts in right
or left direction. 60°. See chart for lpi Stock # and price.
No. S-3 THREE-EDGE SPACER - Space two grooves
at a time for greater speed, or one groove at a time
for accuracy. 60°. See chart for lpi, Stock # and price.
No. KL & KR SKIP CHECK - Skip-one-line cutters w/
teeth on left (KL) or right (KR). 60°. 20 and 22 lpi are
universal left/right. See chart for lpi, Stock # and price.
STYLE
S-2
S-3
KL
KR
SE
SD
16 LPI
#364-200-216AK
#364-300-316AK
#364-401-003AK
#364-401-003AK
#364-452-116AK
#364-453-216AK
18 LPI
#364-200-218AK
#364-300-318AK
#364-401-004AK
#364-401-004AK
#364-452-118AK
#364-453-218AK
20 LPI
#364-200-220AK
#364-300-320AK
#364-401-001AK
#364-401-001AK
#364-452-120AK
#364-453-220AK
Want To Learn How To Checker?
Browse our Books & Video section!
22 LPI
#364-200-222AK
#364-300-322AK
#364-401-002AK
#364-401-002AK
#364-452-122AK
#364-453-222AK
No.V-EDGER - Single-edge tool used to score the outline
and guide lines of the checkering pattern and to deepen
the checkering as well as to finish the outline. a
b
#364-100-060AK No. V-Edger 60° 4F06P46. . . . . . . . . . . $ 7.99
#364-100-090AK No. V-Edger 90° 4F06P46. . . . . . . . . . . . . 7.99
No. BCN BORDER-CONCAVE - Cuts a concave groove
as a border. Erases some overruns. Saves time. a
b
#364-106-601AK BCN Border Concave, 4F05P28. . . . . . . . . . . . . . . . . . $ 7.05
28 LPI
#364-200-228AK
#364-300-328AK
#364-401-006AK
#364-401-006AK
#364-452-128AK
#364-453-228AK
PRICE
4F06B46 $ 7.99
4F07B16 $ 8.99
4F07H16 $ 8.99
4F07H16 $ 8.99
4F07H16 $ 8.99
4F07H16 $ 8.99
No. BV-N & BV-W BORDER-VEX - Cut a convex border
around the pattern. Erases overruns. BV-N (narrow)
comes in 20-28 lpi sets, BV-W (wide) comes in 18 lpi
sets. BV-XW (extra-wide) comes in 16 lpi sets. 60°. b
a
#364-105-601AK BV-N Border Vex 4F06P46. . . . . . . . . $ 7.99
#364-105-602AK BV-W Border Vex 4F06P46. . . . . . . . . . . 7.99
#364-105-603AK BV-XW Border Vex 4F06P46. . . . . . . . . . 7.99
No. PL-60 & PL-90 POINTER-LONG - File-type cutters
used to “Point-Up” diamonds, finish outline. 60° and
90°, Medium (M) and Fine (F). a
b
#364-101-601AK PL-60F Pointer 4F06P46. . . . . . . . . . . $ 7.99
#364-101-602AK PL-60M Pointer 4F06P46 . . . . . . . . . . . . 7.99
#364-101-901AK PL-90F Pointer 4F06P46. . . . . . . . . . . . . 7.99
#364-101-902AK PL-90M Pointer 4F06P46 . . . . . . . . . . . . 7.99
Holds Cutter Rigidly
A favorite set of Master Stockmakers. Handles all checkering
beautifully; the only additional
tool that may be needed is a veiner.
Designed with the professional in
mind, yet a great set for the neophyte who wants to start out checkering with a complete set. b
a
SPECS: Set includes: Nos. C1, F1, S1 and Style 2, Style 3 and Style 4
cutters, complete with handles. 90° cutters.
STOCK #
LPI
STOCK #
LPI
#241-700-016AK 16
#241-700-022AK 22
#241-700-018AK 18
#241-700-024AK 24
#241-700-020AK 20
— Advise # — Dem-Bart Master Checkering Set, 1D47Z40. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 64.99
S-1 TOOL
Gets Into
Tight
Places
Hardwood, steel-ferruled handle is shaped for precise control
and minimum fatigue. Steel shank is slotted at the tip to hold
replaceable cutter head rigidly and eliminate tendency to rock
as you checker. a
b
SPECS: 7 1⁄2" (19cm) overall length. 4" (10.2cm) long wood handle,
3 1⁄2" (9cm) shank.
#241-010-000AK Dem-Bart Checkering Handle, only, 1D04Z42. . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.20
Handle and 90° Cutter Assemblies
Gets into those tight corners, curves and out-of-the-way places. The shank is mild steel and can be re-bent to suit. Cutter
blades furnished in fine cut only. V-Shape. a
b
SPECS: 7" (17.9cm) overall. 4" (10.2cm) handle, 3" (7.6cm) shank.
90° cutter.
#241-001-000AK S-1 Checkering Tool Complete, 1D07Z23. . . . . . . . . . . . . . . . . . . . . . . . . $ 10.99
#241-001-100AK S-1 Checkering Cutter, only, 1D02Z76. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.99
DEM-BART REPLACEMENT CUTTERS
Dem-Bart Replacement Cutters, Less Handles; All Dem-Bart Cutters Fit All Dem-Bart Handles
Slanted cutter teeth make deep, even grooves and sharppointed diamonds. Professionals appreciate these tools for their
consistent performance. Beginners find that checkering is not as
difficult as they imagined. a
b
No. 4 RIGHT HAND SPACING TOOL - Identical to No. 3, except
that the right hand blade is the cutting blade.
SPECS: See chart for lpi, Stock # and price.
No. 1 SINGLE LINE CUTTER - Used for making the original layout and to deepen rows after they are marked in with spacing
tools. “V” shaped with teeth on both sides.
#241-100-001AK No. 1 Fine 1D03Z72 . . . . . . . . . . . . . . . $ 5.99
#241-100-002AK No. 1 Coarse 1D03Z72. . . . . . . . . . . . . . 5.99
SKIP LINE L & R - Self-guiding, skip-one-line cutters w/teeth on
left, “L” or right, “R”.
No. 2 DUAL CUTTER - Used for marking rows and for deepening rows after marking. One blade follows a guideline while the
other blade marks the next row. This is a combination spacer
and deepening tool.
TRIPLE CUTTER - Three cutting blades. Used after pattern
lay-out. Has equalizing effect on lines-per-inch to assure even,
correctly-spaced pattern.
No. B-1 TOOL - A wide, bordering tool which is used to put the
final border around the layout or pattern.
No. 3 LEFT HAND SPACING TOOL - Smooth, right-hand blade #241-150-001AK B-1 Wide 1D03Z72. . . . . . . . . . . . . . . . . $ 5.99
follows a fine guideline. Left-hand blade has teeth and cuts a new
row as checkering progresses from right to left. Produces very No. B-2 TOOL - A narrow, bordering tool which is used to put the
final border around the layout or pattern.
straight rows and exceedingly precise checkering.
#241-150-002AK B-2 Narrow 1D03Z72. . . . . . . . . . . . . . $ 5.99
STYLE
16 LPI
18 LPI
20 LPI
22 LPI
24 LPI
26 LPI
28 LPI
32 LPI
PRICE
No. 2
#241-200-016AK #241-200-018AK #241-200-020AK #241-200-022AK #241-200-024AK #241-200-026AK #241-200-028AK #241-200-032AK 1D03Z72 $ 5.99
No. 3
#241-300-016AK #241-300-018AK #241-300-020AK #241-300-022AK #241-300-024AK
NA
NA
NA
1D03Z72 $ 5.99
No. 4
#241-400-016AK #241-400-018AK #241-400-020AK #241-400-022AK #241-400-024AK
NA
NA
NA
1D03Z72 $ 5.99
Skip Line L
NA
#241-501-018AK #241-501-020AK #241-501-022AK #241-501-024AK
NA
NA
NA
1D04Z22 $ 5.99
Skip Line R
NA
#241-502-018AK #241-502-020AK #241-502-022AK #241-502-024AK
NA
NA
NA
1D04Z22 $ 5.99
Triple
#241-530-016AK #241-530-018AK #241-530-020AK #241-530-022AK #241-530-024AK #241-530-026AK
NA
NA
1D04Z49 $ 6.99
order on the web
www.brownells.com
BROWNELLS
. . . ONLY THE BEST . . . 435
PAGE checkering supplies
No. PS POINTER-SHORT - Fine-tooth finishing tool for
short radius patterns. a
b
#364-102-060AK No. PS Pointer, Short, 60°, 4F05P48 . . . . . . . . . . . . . . . . . . . . $ 6.99
#364-102-090AK No. PS Pointer, Short, 90° 4F05P48. . 6.99
24 LPI
#364-200-224AK
#364-300-324AK
#364-401-005AK
#364-401-005AK
#364-452-124AK
#364-453-224AK
Designed For The Pro
HANDLE
4" long wood handles. H-1 offset for good rear view, 31⁄2" long
shank. H-2 curved, no offset, 31⁄2" shank. H-3 sharp bend for
b
Pointer short. 23⁄4" shank. a
#364-001-100AK Gunline H-1 Handle 4F07P46 . . . . . . $ 8.99
#364-002-200AK Gunline H-2 Handle 4F06P97 . . . . . . . 8.99
#364-003-300AK Gunline H-3 Handle 4F05P97 . . . . . . . 6.99
#364-175-012AK 12, H1/H2 Replacement Pins, 4F03B48. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.99
#364-000-013AK 12, H3 Replacement Pins, 4F01P99. . . . . . . . . . . . . . . . . . . . . . . . . . . 2.99
No. S-2 TWO-EDGE SPACER - One edge cuts a new
groove while the second rides in a previously cut
groove. 60°. See chart for lpi, Stock # and price.
MASTER SET
The Basic Kit
Practical assortment of checkering tools selected by professional
stockmaker Bill McGuire to be sure
beginners would have the right
tools to get started properly. Each
cutter is a miniature rasp that will
quickly cut sharp, true diamonds.
Cutters are quickly interchangeable. a
b
SPECS: Set includes: No. 1C single line cutter w/handle, No. 1F cutter only, No. 2 line cutter w/handle, No. 4 guideline cutter only, No.
S-1 cutter w/handle, No. B-1 border cutter and checkering gauge.
90˚ cutters.
STOCK #
LPI
STOCK #
LPI
#241-600-016AK
16
#241-600-020AK
20
#241-600-018AK
18
#241-600-022AK
22
— Advise # — Checkering Starter Set 1D33Z36. . . . $ 46.99
Get One For Every
Cutter
Affordable and easily expanded as
skill level increases. a
b
SPECS: Includes 4 tools: 2-Edge Spacer;
Border-Vex; V-Edger; Pointer Long; Checkerer’s Rule; Layout Gauge; Illustrated Instructions; 60° spacers, 90° cutters.
STARTER SET
STOCK WORK
• • • Quickly Interchangeable Heads • • • Smooth-Cutting, Rasp-Type Heads • • • • • • Wide Selection Of Head Designs For Every Situation • • • Cut True, Sharp Diamonds • • • Positive, Spring-Pinned Heads • • • Smooth Cutting • • • Long Lasting
U.J. RAMELSON
shaping/inletting tools
STOCK WORK
WOOD CARVING TOOL SETS
High-Quality Tools
For Inletting &
Detailing Stocks
Precision-made
wood
carving tool sets contain
a variety of chisels and
gouges for inletting stocks
or just cleaning up the
corners after bedding. Each kit comes with six different-size
tools, perfect for the novice or seasoned pro alike. Shanks are
machined from hardened tool steel, then ground and polished to
a sharp edge for smooth, easy carving. Palm Handle - Designed
to keep your fingers close to the cutting edge, so these are ideal
for intricate work. The wide, comfortable half-round handle features a flat spot to index the tool in your hand and prevent it
from rolling off your bench. Straight Handle - Conventional cylindrical handle that you can wrap your entire hand around. a
b
SPECS: Includes 9⁄64" (3.6mm) gouge, 5⁄16" (7.9mm) gouge, 3⁄8"
(9.5mm) chisel, 9⁄64" bent parting, 3⁄8" skew, 3⁄8" bent chisel. Palm
Handle – 2¼" (5.7cm) blade length, 5" (12.7cm) OAL. Straight
Handle – 2½" (6.3cm) blade length, 6" (15mm) OAL.
#100-004-975AK Palm Handle Carving Set, 9K33Y93. . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99
#100-004-976AK Straight Handle Carving Set, 9K33Y93. . . . . . . . . . . . . . . . . . . . . . . . . . 39.99
CHECKERING ACCESSORIES
To Help You Do The Best Checkering Job Possible
90° BENT NEEDLE FILES - Made
for us on special order for gun
checkering. Cutting edge of the
“V” is 90°, thus eliminating tipping the tool from one side to the
other to point-up 90° diamonds. Assures good, positive work.
Uniform contact and shape. Back of file is “Safe”.
SPECS: 61⁄4" (15.9cm) overall length. Medium or Fine cut.
#080-648-901AK Med. 90° Bent File 8K09A65. . . . . . . $ 12.99
#080-648-903AK Fine 90° Bent File 8K09A56. . . . . . . . 13.49
60° BENT NEEDLE FILES - Pointing
up new checkering and cleaning out
old. The only thing to use for getting
true, sharp diamonds. Available in three cuts: Coarse - for cleaning out old, dirty checkering; Medium - for pointing up new diamonds, and Fine - also for pointing up new diamonds.
SPECS: 61⁄4" (15.9cm) overall length.
#080-648-600AK Coarse 60° Bent Needle File, 8K10A85. . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99
#080-648-602AK Med. 60° Bent Ndl File 8K18A36. . . . 24.99
#080-648-604AK Fine 60° Bent Ndl File 8K15A75. . . . . 21.49
checkering supplies
NEEDLE FILE HANDLES - Helps the
needle file become a part of your hand.
Helps control direction of cut and eliminates canting. Handle is hollow full length with positive-grip
screw collet to hold file in position. Can seat file into handle to
any length desired.
SPECS: 33⁄16" (8.1cm) overall length. Black plastic.
#249-210-300AK Needle File Handle 8K00PUA. . . . . . $ 8.99
– 3 or More – Needle File Handles, per each, 8K00AVB . . . . . . . . . . . . . . . . . . . . . . . . . . 4.49
MARK-ON-ANYTHING PENCILS Writes on rubber, steel, glass, wood,
plastic, plexiglas, photographs - literally anything as long as it is not wet
or greasy. Then, cleans off easily with
a little rub or a “spit-n’-swipe”. Not abrasive, so won’t scratch.
Won’t gouge stock when laying out checkering/inlays/inletting.
Sharpen to super-fine point for most precise work in engraving,
checkering, carving, machining, and design. a
b
SPECS: 7" (17.9cm) long. White or Bright Yellow. Sold in paks of 6
of 1 color. Assortment contains 3 each.
#347-125-600AK 6 White Pencils 7D11H73. . . . . . . . . $ 13.49
#347-125-601AK 6 Yellow Pencils 7D10H23 . . . . . . . . . . 11.99
#347-125-000AK M-O-A Pencil Assortment, 7D10V22. . . . . . . . . . . . . . . . . . . . . . . . . . . 11.99
B
ROWNELLS
436
PAGE DEM-BART VEINER
Short, compact veiner
puts you closer to your
work for firm, no-slip
control and all-angle maneuverability when making curved lines, fleur-de-lis or any
border work. Perfect for diamond cleanup at border junctions.
Tool-steel, V-shaped shaft is curved upward to increase cutting
efficiency. Takes and holds sharp edge. Palm-sized handle feels
natural…in fact, we couldn’t put it down until we’d carved on
every piece of good scrap wood in sight! a
b
SPECS: 60°- 4 5⁄8" (11.7cm) overall length. Handle is 3 1⁄8" (7.9cm),
11⁄2" (3.8cm) shank. 90° - 4 3⁄4" (12cm) overall length. Handle is 3 1⁄4"
(8.2cm), 11⁄2" (3.8cm) shank.
#241-026-060AK 60° Dem-Bart Veiner 1D15Z78. . . . . $ 21.99
#241-026-090AK 90° Dem-Bart Veiner 1D15Z78. . . . . . . 21.99
GUNLINE JOINTER
Straightens Crooked Lines
Comfortable wooden handle and hardened steel cutter give
you complete control when you need to straighten out checkering
lines which have gone off course. Besides straightening, the tool
is perfect for laying out the critical, intersecting, master lines. b
a
SPECS: Hi-carbon tool steel, 7⁄8" (22.2mm) cutting area.
#364-000-011AK 60° Jointer Tool, 4F24P88. . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
Brownells
STOCKMAKER’S STARTER SET
PERMATEX PRUSSIAN BLUE
FORSTER
INLETTING GUIDE SCREWS
Compact Design, Takes &
Holds Sharp Edge
Gives A Visual Fit Check
Intense blue paste clearly marks
high spots on parts being fitted.
SPECS: 3⁄4 oz (21.2g) tube
#100-001-581AK Prussian Blue 2A04B49. . . . . . . . . . . . $ 4.99
Only Way You Can Keep Action Square While Inletting
Headless, extra-long design so you can repeatedly take barreled action in and out of stock without removing screws. a
b
SPECS: Approx. 3" (7.6cm) long. 3⁄16" (4.8mm) dia. Sold in pairs.
STOCK #
QTY
FITS
THREAD
PRICE
1⁄
#319-415-070AK Pair Win. 70
9A04Y22 $ 5.99
4"-32
1
⁄4"-22
#319-415-098AK Pair Mauser
9A04Y22 $ 5.99
1
⁄4"-30
#319-415-170AK Pair Enfield
9A04Y22 $ 5.99
#319-415-270AK
Sako, Howa,
Pair S&W 1500, WBY Vanguard 6x1mm 9A04Y22 $ 5.99
#319-415-700AK
Rem 700/721/722
Pair Sav 110/WBYMKV Dakota 1⁄4"-28
9A04Y22 $ 5.99
#319-415-605AK Each 6.5 Arisaka
6x.9mm 9A06Y41 $ 10.99
#319-415-707AK Each 7.7 Arisaka
6x.75mm 9A06Y41 $ 10.99
1⁄
#319-415-721AK Each Springfield/Krag
9A06Y41 $ 10.99
4"-25
FORSTER
STOCKMAKER’S HANDSCREWS
Recommended by leading stockmakers for final accurate fitting of the stock to action. a
b
SPECS: Handles are 3" (7.6cm) long. Screw lengths vary for
the different guns. Sold in pairs only.
STOCK #
FITS
THREAD
STOCK #
FITS THREAD
1⁄
#319-416-172AK Enfield
#319-416-002AK Sako
6x1mm
4"-30
1⁄
#319-416-982AK Mauser 98
#319-416-032AK Springfld/ 1⁄4"-25
4"-22
Krag
#319-416-702AK Win 70 1⁄4"-32
#319-416-700AK Rem 700/721/722; 1⁄4"-28
Sav 110; Dakota;
Wby Mk V
#319-000-003AK Ruger® Mark II 10-32
–– Advise # –– Stockmaker’s Handscrews, 9A14Y93. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99
POUNCE WHEEL - For transferring checkering and carving patterns from drawings/decals to the
stock. Puts a series of deep, fine dots in the wood.
SPECS: 5" (12.7cm) overall length. 1⁄4" (6.3cm) diameter handle.
#356-009-000AK Pounce Wheel 6E06Z45. . . . . . . . . . . . $ 8.60
PATTERNMAKERS’ CABINET RASPS
The famous Nicholson Shoemakers’ and Patternmakers’ Cabinet Rasps made especially for wood filing where a smooth finish
is desired. Comes in two cuts, second or smooth, 10" long cutting
surface. Rasp is half-round shape, but slightly wider than usual
with wider radius also. Edges are cut (have teeth) and taper
slightly from tang to front. The unusual tooth design eliminates
most “filling” problems, does not gouge into wood or snag crossgrain. Probably the most useful wood rasp for “almost final”
shaping and finishing. Teeth are coarser than the Wood Files.
SPECS: 12 5⁄8" (19cm) overall length. 7⁄8" (22.2mm) wide, tapers to
7⁄
16’ (11.1mm). #49 is second cut, #50 is smooth cut.
#191-188-460AK #49 Cabinet Rasp 1A00HDZ. . . . . . . $ 53.99
#191-188-610AK #50 Cabinet Rasp 8K00YTP. . . . . . . . 66.99
NO-CLOG FILES
Superb For Shaping Wood
Indispensable for stock inletting or fitting stock
accessories such as curved butt plates. Easy to apply with small brush. No mess or staining. Washes
off hands and clothes easily. Makes a good, clear
mark. Use black for light colored stocks; gold works best on dark
colored stocks. a
b
SPECS: 1⁄2 oz. (14.8ml) bottle.
#457-001-050AK Inletting Black 7E06V95. . . . . . . . . . . $ 9.95
#457-002-050AK Inletting Gold 7E11V78. . . . . . . . . . . . 15.99
Covers every operation from rough shaping to final contouring
of combs, grip areas. With heavy pressure, the wood rolls off at an
incredible rate. For finish work, the weight of the file alone will
make “sawdust” cuts. Fine sanding is usually all that’s necessary
(cuts smooth cross grain, too)! Hold at a 60° angle to edges (butt,
cheekpiece, etc.). Unusual, no-clog design.
SPECS: Flat - 12 tpi, 10" (25.4cm) long, 1" (2.5cm) wide; HalfRound/Flat - 14 tpi, 8" (20.3cm) long, 23⁄32" (18.3mm) wide.
#191-202-910AK Flat No-Clog File 1A00HDZ. . . . . . . $ 41.99
#191-205-820AK Half-Rnd/Flat No-Clog File, 1A00YTP. . . . . . . . . . . . . . . . . . . . . . . . . . 40.99
METROPOLITAN MUSIC THUMB PLANE
HALF-ROUND VULCANITE FILE
Positive Marking Of Hi Spots Without Staining
All the chisels, files, gouges, scrapers and other tools required
to turn a rough-cut, semi-inletted blank into a finished gun
stock. Our Tech Support Staff s elected all the tools you need
to do the job right. You save more than 10% over the price of
purchasing them separately. a
b
SPECS: Kit contains: 1 ea.; 5⁄32" (3.97mm), 9⁄16" (14.4mm) Henckel
Chisels, 1 ea.; 5⁄32" (3.97mm), 3⁄8" (9.5mm), 9⁄16" (14.4mm). Henckel
Gouges, (1) bottle of Inletting Black. (2) - #1 Acid Brushes. (1)
Hand Carving Knife. (1) - 1⁄2" (12.7mm) rd. Vulcanite File. (1) - 8"
(20.3cm) Cabinet File. (2) - #3 File Handles. (1) - Curl Scraper
Kit. (1) - #50 Patternmaker’s Rasp. (1) - Rawhide Mallet. (2) - 2"
(50.80cm) x 4" (101.60cm) x 1⁄4" (6.35mm) Hard Felt Pads. 2 each,
Adalox No-Fil sandpaper in 120, 220, 280 grit. 2 each, Durite
sandpaper in 320, 400, 600 grit. (1) "Marks-On-Anything” Pencil.
#080-761-000AK Stckmker Starter Set 8K460A86. . $ 593.99
GOUGE SLIP - A universal sharpener for
gouges and curved edges. Also used for lapping inside or outside curved surfaces. a
b
SPECS: 6" (15.2cm) long.
#657-071-076AK FS76 Gouge Slip 7E00PUA. . . . . . . . $ 34.99
Favorite Of Professional Stockmakers For Shaping & Finishing
Fast - Positive Seating
INLETTING BLACK & GOLD
All The Tools To Create A Finished Stock
From A Semi-Inletted Blank
STOCKMAKING ACCESSORIES
PALM CHISELS - Puts the cutting edge directly
at your fingertips and snuggles the handle in
your palm to give total control at every working
angle. Blades are finish-ground, polished and
properly hardened. a
b
SPECS: 4 1⁄2" (11.4cm) overall length. Handle is 11⁄4"
1⁄
(3.2cm) with 3 4" (8.2cm) long blade.
#615-100-006AK 6 Palm Chisels 5A00ZAY. . . . . . . . . . $ 34.00
Precise Planing For Stock Making
Silicone bronze with a chrome vanadium
blade allows precise adjustments for stockmaking. Available with round or flat soles
and in different sizes.
SPECS: Silicone bronze bodies, chrome vanadium blades. 50.504 - Curved sole, 4.7cm
OAL, 18mm wide blade. 50.505 - Flat sole, 6cm OAL, 22.5mm wide
blade. 50.554 - Flat sole, 4.7 cm OAL, 18mm wide blade.
#100-002-065AK 50.504 Curved Thumb Plane, 9A59P99. . . . . . . . . . . . . . . . . . . . . . . . . $ 69.99
#100-002-067AK 50.505 Flat Thumb Plane 9A53P33. . 66.99
#100-002-066AK 50.554 Flat Thumb Plane 9A53P33. . 66.99
SINCE 1939
4 Cutting Faces In One File
Once you’ve tried this file, you’ll know why folks love it. Gives
you 4 different cutting faces: half-round bastard, flat bastard,
half-round 2nd cut and flat 2nd cut. Because of special shape,
you can get into places easily where a square-ended file just
won’t fit. Fantastic for shadowline cheekpieces, shaping combs
or schnables, inletting bolt knobs, around the wrist, tang and
grip. Great on hard rubber, soft metals, plastics and wood.
SPECS: 8" (20.3cm) long. 1⁄2" (12.7mm) wide and tapers to 1⁄8"
(3.2mm) at the points.
1⁄
#360-313-841AK 2 Round Vulcanite File 6C00HDZ.$ 45.99
Brownells
ROYAL ARMS
HARD FIT CURL SCRAPERS
JERRY FISHER SCRAPERS
Famous stockmaker Jerry Fisher says: “In 20 years of stockmaking this is the best inletting scraper I have ever used, and I
have tried a few. Just hold like a pencil and work from right to
left, or left to right, depending on the direction of the grain.” Precision-ground from tough alloy tool steel, sharpened and ready
to use. Instructions included. Three tools, each with two different sized heads. Measurements given are cutting head sizes. a
b
SPECS: Large, 1" (2.5cm) and 3⁄4" (19mm). Small, 5⁄8" (15.9mm) and
1⁄
11⁄
2" (12.7mm). Octagon, 1" (2.5cm) and
16" (17.5mm).
#310-150-002AK Large Fisher Scraper 1C11A54. . . . $ 14.01
#310-150-001AK Small Fisher Scraper 1C11A54. . . . . . 14.01
#310-150-003AK Octagon Fisher Scraper 1C11A54 . . . 14.01
ROYAL ARMS TWO CHERRIES
CHISEL
Forged Steel Holds Its Edge
German steel chisels are
hardened to Rc 61 for superior
strength and sharpness. Hornbeam handles have steel hoops to
prevent splitting. Final honing is required prior to use.
SPECS: Carbon steel, wood handle. Dimensions vary: Chisel – approx. 4" (10.2cm) long, sweep/cut width given in price lines (1"
= 25.4 mm); Handle – approx. 4" (10.2cm) long, 13⁄16" (21mm) dia.
CURVED GOUGE #541-000-001AK 8mm Curved Gouge, 1D40B58. . . . . . . . . . . . . . . . . . . . $ 50.99
STRAIGHT V-CHISEL #541-000-004AK 6mm Straight V-Chisel, 1D41B67. . . . . . . . . . . . . . . . . . . . $ 52.99
STRAIGHT CHISEL #541-000-005AK 4mm Strgt Chisel 1D25B64 . . $ 32.99
STRAIGHT CHISEL #541-000-006AK 10mm Strgt Chisel 1D25B64. $ 32.99
STRAIGHT CHISEL #541-000-007AK 14mm Strgt Chisel 1D40B13. $ 50.99
STRAIGHT GOUGE #541-000-008AK 4mm Strgt Gouge 1D40B75. . $ 50.99
STRAIGHT GOUGE #541-000-011AK 6mm Strgt Gouge 1D40B75. . $ 50.99
STRAIGHT GOUGE #541-000-012AK 10mm Strgt Gouge 1D40B75. $ 50.99
STRAIGHT GOUGE #541-000-013AK 12mm Strgt Gouge 1D51B78. $ 64.99
GUNLINE
OCTAGON BEDDING TOOL
Finishes an inletting job
where tiny amounts of material must be removed from tight recesses. Hardened and heat
treated to hold an edge, still easy to sharpen. Chisels cut a thin
shaving of wood from around triggerguard or rear tang recesses.
Scrapers get into tight recesses, remove just a whisker of wood. b
a
SPECS: 1095 steel shaft and blade, wood handle. 71⁄2" (19cm) overall length. Chisels available in right- or left-hand cut. Width: Straight
and Curved scrapers .473" (12mm). Set includes 5 tools.
#772-100-001AK Right Hand Chisel 2G00UAV. . . . . . $ 12.99
#772-100-002AK Left Hand Chisel 2G00XCH. . . . . . . . 12.99
#772-100-003AK Straight Blade Scraper 2G00ZAY. . . 12.99
#772-100-004AK Curved Blade Scraper 2G00PUA. . . 12.99
#772-100-000AK Stock Tools Set 2G00AYT. . . . . . . . . . 59.99
GLASBED bedding is the single best choice for the gun
owner who wants to give his gun the accuracy and shotto-shot consistency that only GLASBED bedding can; the
dealer whose customers are looking for the easiest, most
“goof-proof” way to bed their rifles or the gunsmith restocking and accurizing guns with black fiberglass or traditional
wood stocks. It’s a real time saver! There’s no measuring
involved, and nothing to clean up afterwards. The proportions are exact so you can’t make a mistake, and the working time is long enough for even a novice “bedder” to get
everything positioned correctly long before the GLASBED
bedding begins to set up. Plus, the convenience and ease of
use make it a natural for the busy shop and experienced
stock man. We took our time-proven ACRAGLAS GEL® formulation and made it in two colors: fiberglass-stock-black
or gunstock-walnut-brown. Then, we packaged it in a neat,
divided, polypropylene “bag” that serves as its own mixing
container. You get the right amount of pre-measured resin
and hardner to mix and bed one sporter stock without a lot
left over. No cups or spoons to clean and no dye to spill. You
get your choice of a bottle of our traditional Release Agent
or our new, Non-Flammable version, which allows us to ship
GLASBED by air if you need it NOW! Also included are a
couple of Swabs to apply the Release Agent with, some Sandpaper to rough-up the wood or fiberglass inside the stock
and help get rid of any mold releases or stock finish left in the
inletting, plus two Spreader sticks to let you put the GLASBED
bedding everywhere you want it. Then, we include our detailed,
illustrated, easy-to-understand Instructions that walk you
through the process, step-by-step, so every stock you bed will be
right. You get everything you need to GLASBED bed a stock in
one handy, compact package. a
b
GLASBED takes stock bedding out of the “black magic” stage
and makes it truly user-friendly for everyone — especially the
first-timer. And, it’s loaded with all the best features:
• A butter-smooth consistency that won’t run, drip or leach out
from between wood and metal after being placed in the stock.
• Nylon Derivatives are formulated in GLASBED bedding, giving superb “thin strength”, shock resistance and stability over
normal temperature extremes.
• A unique, stable, molecular lattice structure that will not
crack, craze or “sugar-out” as will other 1-to-1 epoxies which
do not have this structure.
Saves Hours Of Hand Work
Rubber mounted cutters shave out wood without “digging in”. a
b
SPECS: 81⁄2" (21.6cm) overall. Cut length 1⁄2" (12.7mm). Includes
handle, three cutters, screws and pins.
TOOL STOCK #
RPL. CUTTERS STK #
SIZE
11⁄
#364-000-001AK
NA
16" (17.5mm)
3⁄
#364-000-002AK
NA
4" (19mm)
13⁄
#364-000-003AK
#364-000-008AK
16" (20.6mm)
7⁄
#364-000-004AK
#364-000-009AK
8" (22.2mm)
#364-000-005AK
#364-000-010AK
1" (2.5cm)
— Advise # — Octagon Bedding Tool 4F33P58 . . . . $ 38.99
— Advise # — Replacement Cutters 4F17P72. . . . . . . 20.99
• SUPER-STRENGTH NYLON EPOXY
• Less than 1⁄10 of 1% shrinkage so the tight fit needed for best
accuracy stays that way - TIGHT!
STOCK INLETTING TOOLS
Removes Thin Cuts
Of Wood In Very Tight Places
• PRE-COLORED • READY TO USE
• NO-CUP MIXING
• The Easy-To-Knead formulation of GLASBED bedding and
the unique packaging makes for easy mixing. Just pull the
divider and squish the resin and hardener together for four
minutes. When the mixing is done, cut one corner of the bag
open and squeeze the mixed GLASBED bedding out into the
stock.
• 20 minute “pot life” gives you more time to do the actual
bedding with no fear that the epoxy will set up before you’re
done. Especially nice for the first-time user.
• Longer cure time - The exclusive, controlled molecular structure of GLASBED bedding gives exceptional resistance to
cracks and stress when fully cured.
order on the web
www.brownells.com
• Supplied in your choice of pre-dyed colors, either black or
brown. The black matches black synthetic stocks and “brings
the inletting to the metal”. The brown is a nice, medium, “walnutty” shade that blends well with most popular wood stocks.
• Your choice of Traditional or Non-Flammable Release Agent.
Both are equally effective, however, we can ship the NonFlammable version by air if you need it fast, or if you live
outside the Continental U.S.!
If you’re GLASBED bedding one gun or a lot of guns, one at a
time, this is for you. Easy, no-mess, no-waste mixing...stay-inone-spot feature...sophisticated molecular structure...long pot
life and curing time for no-fear stock bedding. We guarantee your
complete satisfaction, 100% - period.
GLASBED KIt - Includes 1 fl. oz. (30 ml) Resin, 1 fl. oz. Hardener with Dye mixed in, 4cc Release Agent (Traditional or NonFlammable), Two Release Agent Application swabs, Two 41⁄2"
(11.4cm) x 51⁄2" (13.9cm) square sheets of Sandpaper to roughen
stock surfaces, Two Spreader sticks and Complete, Illustrated
Instructions.
#081-050-100AK Black GLASBED Kit, Traditional, 5L21U63. . . . . . . . . . . . . . . . . . . . . . . . . $ 31.99
— 6 or More — Black GLASBED Kits, Traditional,
per each 5L16U49. . . . . . . . . . . . . . . . . . 23.99
#081-050-101AK Brown GLASBED Kit, Traditional, 5L21U58. . . . . . . . . . . . . . . . . . . . . . . . . . . 31.99
— 6 or More — Brown GLASBED Kits, Traditional, per
each 5L16U49. . . . . . . . . . . . . . . . . . . . . 23.99
#081-050-001AK Black GLASBED Kit, Non-Flammable, 5L17U44. . . . . . . . . . . . . . . . . . . . . . . . . . 26.99
— 6 or More — Black GLASBED Kits, Non-Flammable,
per each 5L13U35. . . . . . . . . . . . . . . . . . 26.99
#081-050-002AK Brown GLASBED Kit, Non-Flammable, 5L17U63. . . . . . . . . . . . . . . . . . . . . . . . . . 26.99
— 6 or More — Brown GLASBED Kits, Non-Flammable,
per each 5L13U35. . . . . . . . . . . . . . . . . . . 19.99
BROWNELLS
. . . ONLY THE BEST . . . 437
PAGE bedding supplies
Used For
Many Years
By One Of The
Best
ROBERT LARSON
• NO-RUN, BUTTER-SMOOTH
CONSISTENCY
shaping/inletting tools
Made to remove the tiniest possible curl of wood to get that
exact fit that separates “Pros” from “duds”. Handles are placed
at right angles to the cutting edge; you get complete control of
the edge and almost no tendency to follow wood grain, gouge
or dig in.
Made of best quality tempered tool steel, with enough heft
to eliminate any “flexing”. Shaped for positive fingertip control
of blade thru full stroke. Finger clearance under the handle for
tight places. Available in 2 styles - 3 blade widths. Sizes small
enough for trigger hole; big enough for barrel channel. Flat ones
perfect for fitting floor plates, tangs, magazines.
Not intended to rough out barrel channel, so don’t bear down.
Just draw toward you across work. Makes the most beautiful
curls and dust; yet won’t work-harden wood as do rasps, or leave
grit to ruin tool edges as does sandpaper. Without a doubt, the
best tool ever designed for the fine, controlled removal of the
inletting black and that “whisker” of wood underneath!
SPECS: Two styles: Curved and Straight, 3 sizes: 1⁄4" (6.3cm), 3⁄8"
(9.5cm), 1⁄2" (12.7mm). Set includes one of each.
STOCK #
STYLE SIZE
STOCK #
STYLE SIZE
1
⁄4"
#080-076-025AK Curved 1⁄4"
#080-076-250AK
Straight
3⁄
#080-076-037AK Curved 3⁄8"
#080-076-375AK
Straight
8"
1⁄
#080-076-050AK Curved 1⁄2"
#080-076-500AK
Straight
2"
— Advise # — Curl Scraper, each 8K20A45. . . . . . $ 27.99
#080-076-000AK Curl Scraper Set 8K93A86. . . . . . . . 124.99
Cut Clean, Perfect Edges
Super sharp, handmade
with quality materials, easy
to use, and sharpen. Comfortable handle gives you
complete control of the tool, and long shaft helps keep blade flat
on the work surface to cut perfectly straight, clean edges. Choose
left or right cut. b
a
SPECS: Steel shaft/blade, wood handle. 811⁄16" (22.1cm) long.
#772-000-001AK Skew Chisel Right, 2G00AVB . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99
#772-000-002AK Skew Chisel Left 2G00CHD. . . . . . . . 14.99
Brownells GLASBED®
STOCK WORK
For That Final,
“Like It Grew There” Fit
STOCK MAKING SKEW CHISELS
STOCK WORK
Brownells ACRAGLAS
5) - Unlike paints or air drying plastics, ACRAGLAS hardens
by chemical action. So, a hard surface indicates a hard interior
ready for finishing. The mixture becomes hot before reaching
setting temperature. It then “kicks over” and begins to harden,
reaching full hardness in 48 hours, altho’ it can be worked, sanded and finished before then.
• ACCURIZE WITH
ACRAGLAS
• INCLUDES
BROWN & BLACK
DYES
6) - ACRAGLAS has a shelf life of over 5 years!
7) - ACRAGLAS has been compounded by our research engineers so you have ample time to properly seat the barreled
action in the inletted stock before it starts to harden. There’s
no need to rush, take your time and do the First Class Job you
are capable of doing.
8) - Being a superior bedding compound, you get a doublebarreled benefit when using ACRAGLAS: - In addition to accurizing your gun, you get the satisfaction of having done the
job yourself. Check among your shooting friends and note how
many are proud of their guns being Accurized with ACRAGLAS.
“THOROUGH STOCK PROTECTION”
• EASY-TO-USE KIT
• ACID & WATERPROOF
• STRENGTHENS STOCK
• SIMPLIFIES INLETTING 9) - ACRAGLAS completely seals the inletted side of the gun
stock against all moisture, gun oils, solvents and sprays. Moisture being absorbed by the stock can cause the finest woods to
warp or twist, forcing the gun to shoot different groups on different days. Oils and solvents will eventually make the most
beautiful of woods dirty looking where allowed to soak in and,
in rare cases, actually ruin the wood.
BONDING STRENGTH
ACRAGLAS, as its name implies, is an accurizing material
designed for the exclusive purpose of making a rifle shoot more
accurately. Granted, it is a superior bedding compound used and
sold as such by dealers, stock manufacturers and gunsmiths but the fact remains: its prime purpose is to accurize a rifle. a
b
“THE AMERICAN RIFLEMAN”
bedding supplies
To quote L.R.W. in the American Rifleman “Dope Bag”, “ACRAGLAS will be found an excellent preparation to correct poor
bedding and the re-vitalized rifle should respond with considerably better accuracy.”
“It’s a boon for the lazy, too, because if you are inletting a stock
blank you simply cut out too much wood all the way around,
gob the wood well with ACRAGLAS®, put the metal in (properly
treated with release agent coming with the kit) and set aside
for about 24 hours. When the metal is removed, the result is
perfect bedding for the action - good, strong, and reliable bedding it is, too.”
PROVEN IN THE FIELD As the manufacturers of ACRAGLAS, we cannot help but
be very proud, too, of the many individual shooters and teams
who have won big bore regional and Perry matches with ACRAGLASsed guns…and of the hunters who have sent us “before
and after” targets made when sighting in their game rifles after
using ACRAGLAS.
10) - ACRAGLAS has another feature that is strictly a side
benefit - The bonding strength of ACRAGLAS is phenomenal
- will actually stick “anything to anything” (except certain polyplastics). The letters in our files make one shake his head in
wonder. It seems customers have repaired everything from false
teeth, toilet bowls, pipes, chairs, cribs, cars, radios, TV’s, skis,
sleds, tables, and gun stocks without number. What it amounts to
is this: You name something that has been busted and someone
has undoubtedly used ACRAGLAS to fix it! But, we play this
down. We are not in the glue business. There are a jillion glues
but only one ACRAGLAS!
RELEASE AGENT
Our traditional Release Agent and our new, easy-to-ship, NonFlammable Release Agent selectively lets ACRAGLAS bond to
the stock but not to the barreled action. Both products present
nearly indentical physical characteristics, and are applied in
exactly the same manner. Both form a smooth, vinyl-like coating
between the bedding compound and metal. Non-Flammable Release Agent can be transported by air, immediately upon request,
safely and legally inside and outside the Continental U. S.; no
more waiting for ground shipments to arrive when you need an
ACRAGLAS kit or extra release agent in a hurry.
WHO USES ACRAGLAS AND WHY
STOCK MANUFACTURERS: - For special custom accurizing
jobs and for resale to dealer and retail accounts.
The basic materials used in ACRAGLAS are those developed
for the aircraft industry. These we have adapted to gun work.
Some of the many unusual features of ACRAGLAS are:
PROFESSIONAL STOCKMAKERS: - For obtaining skin-tight
bedding around receivers, at the chamber on the barrel and at
the forend tip on certain jobs.
1) - ACRAGLAS shrinks less than 1⁄10th of 1% when hardening.
This is very important to you as a shooter, for the tighter your
bedding job, the better the job. So perfectly does ACRAGLAS fit
your barrel and action that any stamping marks in the steel will
also be there in the ACRAGLAS…impossible to “Bed” any closer.
GUNSMITHS: - For the complete gamut of stock work - the
complete inletting job, the accurizing of an erratic shooting gun
and for the super-duper stock where the same techniques are
used as by the fulltime stockmaker.
SUPERIOR STRENGTH
2) - ACRAGLAS actually strengthens your stock because of
its own great strength and resistance to breakage or warpage!
3) - ACRAGLAS is acidproof, waterproof, has superior insulating qualities, resists alkalies and will not rot or deteriorate.
4) - ACRAGLAS is highly resistant to impact and will not dent.
Thus, it makes the perfect recoil shoulder. Should it ever be damaged, or if an improper job is done the first time, it can easily be
fixed using the same materials as in the Kit.
B
ROWNELLS
438
PAGE GUNLINE
®
GUN HOBBYISTS AND BUFFS: - To accurize their present
guns or to bed and accurize guns they are stocking; also, to simplify bedding barreled actions into inletted stocks purchased
from stock manufacturers…a great boon for the man who likes
to do the job himself - and wants the best results.
INSTRUCTIONS AND COLOR
ACRAGLAS is amber-clear. To make it match your stock - black
or brown - we furnish two special, acrylic dyes with each Kit.
With them you can color the ACRAGLAS mix to blend properly
with the color of your individual stock - wood or synthetic. The
brown dye nicely matches “normal” walnut but if your stock is ex-
BARREL BEDDING TOOL
ceptionally light walnut, or maple, myrtle, cherry, etc., you may
want to leave out the dye for a closer match. Just remember, the
color you see in the cup will darken somewhat when the ACRAGLAS is in the stock. But, you don’t have to match the color, many
shooters like to create contrast at the joining of barrel and stock
to add a point of distinction to their gun and make sure others
know they’ve taken the time to do a first-rate ’glass bedding job.
Complete, easy-to-follow Instructions are packaged with each
Kit. These tell you how to mix and use. FOLLOW THEM CAREFULLY. We guarantee ACRAGLAS 100%.
ACRAGLAS PRICES
ACRAGLAS KIT: 2 fl. oz. (59 ml) Resin, 7⁄8 fl. oz. (26 ml) Hardener, 7⁄8 fl. oz. (26 ml) Release Agent, Floc, 2 Mixing Cups, Mixing
Stick, Brown Dye, Black Dye enough to bed 2 Rifles. Complete
Instructions.
#081-003-002AK 2-Gun ACRAGLAS Kit, 1H16X44. . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99
#081-003-004AK 2-Gun ACRAGLAS Kit, Non-Flammable, 1H17X79. . . . . . . . . . . . . . . . . . . . . . . . . . 26.99
ACRAGLAS SHOP KIT: 28 fl. oz. (828 ml) Resin, 7 fl. oz. (207 ml)
Hardener, 3 fl. oz. (89 ml) Release Agent, 8 oz. (227g) Floc, 24 3 oz.
capacity Mixing Cups, 50 Mixing Sticks, 5 Packets Brown Dye, 5
Paks Black Dye and Instructions.
#081-003-064AK ACRAGLAS Shop Kit, 1H75X65. . . . . . . . . . . . . . . . . . . . . . . . . $ 99.99
#081-003-065AK ACRAGLAS Shop Kit, Non-Flammable, 1H75X65. . . . . . . . . . . . . . . . . . . . . . . . . . 99.99
ACRAGLAS BULK QUANTITIES
#081-005-028AK 28 oz. Acraglas Resin and 7 oz. Acraglas
Hardener 1H58X61. . . . . . . . . . . . . . . $ 69.99
#081-005-029AK 28 oz. Acraglas Resin, 5L43X52. . . . . . . . . . . . . . . . . . . . . . . . . . 50.99
#081-005-030AK 7 oz. Acraglas Hardener, 5L19X99. . . . . . . . . . . . . . . . . . . . . . . . . . 24.99
#081-005-120AK 120 oz. Acraglas Resin and 30 oz.
Acraglas Hardener 1H158X56. . . . . 199.99
#081-005-121AK 120 oz. Acraglas Resin, 5L130X87. . . . . . . . . . . . . . . . . . . . . . . . 164.99
#081-005-122AK 30 oz. Acraglas Hardener, 5L43X99. . . . . . . . . . . . . . . . . . . . . . . . . . 54.99
#081-007-003AK 3 oz. Bottle Acraglas Release Agent, 1E04X35. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99
#081-007-004AK 3 oz. Bottle Non-Flammable Acraglas
Release Agent 1E04X35. . . . . . . . . . . . . 5.99
#081-007-032AK Quart Bottle Acraglas Release Agent, 5L19X75. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
#081-007-033AK Quart Bottle Non-Flammable Acraglas
Release Agent 5L19X75. . . . . . . . . . . . 29.99
#081-009-016AK Fiber Glass Floc, 5L07X30. . . . . . . . . . . . . . . . . . . . . . . . . . . 9.99
#081-010-012AK Graduated Mixing Cups, 1 dozen, 1H01X71. . . . . . . . . . . . . . . . . . . . . . . . . . . 2.49
#081-001-050AK 50 Acraglas Mixing Sticks, 1H04U37. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99
#083-001-005AK Brown Acraglas Dye, 5 packets, 3H04A50. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99
#083-001-000AK Black Acraglas Dye, 5 packets, 3H04A50. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99
BROWNELLS 2-Gun ACRAGLAS Kit
I've been using acraglas for over 31 years and have
never had a problem with it. It is great for bedding
of course, but the main use I have for it is mending
cracked/broken stocks. I've used it for mending dishes
and other things around the house for my wife also. It is
a super product.
– By Bobby Bailey from De Queen, Arkansas
SINCE 1939
Full Control Of Cutting Head
At All Times With All Cuts
Perfect, chatter-free cut, shaves out excess wood, leaves barrel
channel smooth and ready for barrel without gouging, rasping
or final sanding. Cushioned-cutter design keeps hardened steel
cutter discs at correct angle to remove wood without “digging
in” regardless of amount of pressure. A favorite with pros. a
b
SPECS: 10" (25.4cm) overall. Cut length approximate 11⁄4" (3.2cm).
7⁄
8" and 1" diameter replacement cutters are sold 9 per pak, all other
sizes are sold 11 per pak. Bbl. Bedding Tool Set includes 1⁄2", 9⁄16",
5⁄
11
3
8", ⁄16" and ⁄4" bedding tools complete with handles and cutters.
BARREL BEDDING RPL CUTTER PAK
TOOL STOCK #
STOCK #
SIZE
#364-700-500AK
#364-701-500AK
½" (12.7mm)
9⁄
#364-700-562AK
#364-701-562AK
16" (14.3mm)
5⁄
#364-700-625AK
#364-701-625AK
8" (15.9mm)
11⁄
#364-700-687AK
#364-701-687AK
16" (17.5mm)
#364-700-750AK
#364-701-750AK
¾" (19.0mm)
7⁄
#364-700-875AK
#364-701-875AK
8" (22.2mm)
#364-700-900AK
#364-701-900AK
1" (2.5cm)
— Advise # — Barrel Bedding Tool, except 7⁄8" & 1", 4F24C88. . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
— Advise # — 7⁄8" or 1" Barrel Bedding Tool, 4F27C87. . . . . . . . . . . . . . . . . . . . . . . . . . 32.99
— Advise # — Replacement Cutters, except 7⁄8" & 1", 4F13C93. . . . . . . . . . . . . . . . . . . . . . . . . . 16.99
— Advise # — 7⁄8" or 1" Cutters 4F16C42. . . . . . . . . . . 18.99
#364-700-000AK Barrel Bedding Tool Set, 4F124C40. . . . . . . . . . . . . . . . . . . . . . . . 143.99
GUNLINE BARREL BEDDER JR
Precise “Shaving” Cutters & Rasp Handle For Close-In Work
Gunline’s unique, no-chatter disc cutting system on an inletting rasp-style handle. Rubber cushioned cutter discs. Smooth,
shaving-type cut. a
b
SPECS: Steel shank and cutters, wooden handle, 9" (22cm) long.
Set includes 1 handle and 3 sizes of cutter paks, 1⁄2" (12.7mm), 5⁄8"
(15.9mm) and 3⁄4" (19mm) dia. 6 cutters per pak.
#364-702-500AK 1⁄2" Barrel Bed Jr. Cutters, 4F08C96. . . . . . . . . . . . . . . . . . . . . . . . . $ 10.99
#364-702-625AK 5⁄8" Barrel Bed Jr. Cutters, 4F08C96. . . . . . . . . . . . . . . . . . . . . . . . . . 10.99
#364-702-750AK 3⁄4" Barrel Bed Jr. Cutters 4F08C96. 10.99
#364-702-001AK Barrel Bed Jr. Handle 4F12C19. . . . 14.99
#364-702-000AK Barrel Bedder Jr. Set 4F39C70. . . . . 45.99
HICKS DESIGNS RUGER #1
ACCURIZER
Fine Tune The Barrel
For Consistent Accuracy
Stabilizes the barrel to prevent point of
impact shift as barrel heats up. Steel bedding block attaches
to receiver extension and gives you an adjustable tensioning
screw to regulate barrel movement. Only minor inletting of the
forearm required. a
b
SPECS: Steel, blue finish. 1.28" (3.2.cm) long, .74" (18.9mm) wide,
.51" (13.2mm) high. Includes instructions.
#419-100-001AK #1 Accurizer 9A47H96. . . . . . . . . . . . $ 59.95
Brownells BEDDING FIXTURES
Properly Center & Tension
Garand & M14/M1A Barrel During Bedding
BEDDING SYSTEM
Stabilizes Action For Improved Accuracy
Lightweight aluminum receiver bushing combines with a foam pressure pad to
help stabilize your action for improved
accuracy. Easy to install and eliminates
using messy epoxy bedding that can leave
parts permanently bonded to the stock.
Includes 7⁄16" diameter drill with preset
stop that allows precise stock inletting for
the bushing. Different size pressure pads
fit a variety of stock and barrel combinations, plus the adhesive backing provides
a tight hold during continuous recoil. a
b
SPECS: Aluminum bushing, adhesive-backed foam pressure pads.
7⁄
Includes 16" (1.1cm) diameter drill. For use with wood factory or
custom stocks.
#930-000-055AK Bedding System 3Z20D20. . . . . . . . . $ 24.99
GRAND MASTERS
BOLT ACTION
RIFLE BEDDING STUDS
WHIDDEN GUNWORKS REMINGTON 700
BEDDING V-BLOCK
For Professional Results
Without Damage to Action Screws
Stabilizes Action
For Improved Accuracy
Easy-to-use system aligns the action with the
bottom metal for a professional bedding job without damaging the original screws. Polymer bushings, two on each stud, seal the threaded action
screw holes and bottom metal inlets to keep out epoxy overflow
and help prevent parts from getting permanently bonded in the
stock. Kits available for Remington 700/Weatherby, Winchester
Model 70, and Mauser 98. a
b
SPECS: Studs - Steel, natural finish. Bushings - Polymer. Washer/
Nuts - Stainless Steel. 27⁄8" (7.3cm) long. Win M70 kit contains (3)
studs, (3) washers and (6) hex nuts. Other kits contain (2) studs, (2)
washers and (4) hex nuts.
#713-000-096AK Win M70 Bedding Studs 3A25H00. $ 27.99
#713-000-098AK Rem 700/Wby Bedding Studs, 3A25H00. . . . . . . . . . . . . . . . . . . . . . . . . . . 27.99
#713-000-097AK Mauser 98 Bedding Studs, 3A25H00. . . . . . . . . . . . . . . . . . . . . . . . . . . 27.99
SCORE HIGH REMINGTON 700
PILLAR DRILLING JIG
AIRCRAFT COUNTERBORE
Speed Up & Simplify Pillar
Bedding Installations
Piloted counterbores allow
you to accurately drill stocks
with existing screw holes for
pillar bedding, with no fear of
the cutter wandering. Interchangeable pilots provide increased
versatility, allowing two cutters to do the work of six. Makes adding pillar bedding blocks quick and easy. Pilots and cutters available in popular sizes to accommodate most bedding needs. a
b
SPECS: Counterbore: HSS Steel, 1⁄4" (6.3mm) shank. 9⁄16" (14.4mm)
5⁄
1⁄
and 8" (15.8mm) diameter cutter, 8" (3.1mm) pilot hole. 213⁄16"
(7.1cm) long. Pilot: Carbon steel, 1⁄8," (3.1mm) shank, 1⁄4" (6.3mm)
and 5⁄16" (7.9mm) diameter. .292" Ruger Pilot fits Ruger 77 stocks.
#549-884-365AK 9⁄16" Counterbore 9D00ZAY. . . . . . . . $ 58.95
#549-884-407AK 5⁄8" Counterbore 9D52P44. . . . . . . . . . . 57.12
#549-890-216AK 1⁄4" Pilot 9D00PUA. . . . . . . . . . . . . . . . . . 9.99
#549-890-220AK 5⁄16" Pilot 8K07B90. . . . . . . . . . . . . . . . . . 7.99
#080-000-018AK .292" Ruger Pilot 8K13A42. . . . . . . . . 18.99
b
a
A quick and easy way to inlet
Remington 700 stocks for bedding pillars and ensure precise
alignment with the action screws.
Heavy duty, two-piece, aluminum fixture with hardened steel
guides for easy drilling without
wandering off-track and making
off-center holes. Machined upper
and lower plates are contoured to fit the inletting of the stock for
added support and are held together with high strength, steel
Allen head screws to prevent movement when drilling. Fits Rem.
700 BDL/ADL long action and short action stocks. For 9/16" diameter pillars only. a
b
SPECS: Jig - 6061 Aluminum, natural finish. Bushings/screws steel. Kit includes: (2) LA/SA upper plates; (2) BDL LA/SA lower
plates; (1) ADL lower plate; (2) drill bushings - 9⁄16"; (1) 9⁄16" dia. drill;
alignment tool.
#804-000-009AK 9/16" Pillar Drilling Jig 4K00XCH. . $ 239.95
Stock numbers shown in red indicate the product is made in the U.S.A.
This information is not available for all products at time of catalog production, but will be regularly
updated on our website.
• NYLON EPOXY DERIVATIVE
• BUTTER-SMOOTH CONSISTENCY
• MIXES WITH ATOMIZED METALS
• NOW INCLUDES BROWN & BLACK DYES
Over the years we had hundreds of customerrequests for an
epoxy accurizing compound with a butter-smooth consistency
which would neither run, drip or leach out from between wood
and metal after being placed in the gun stock. After many years
of research and testing, we perfected a modified version of our
popular ACRAGLAS® that gives the same super accurizing bedding job and also meets those specialized smooth application
features you have asked for. a
b
In formulating ACRAGLAS GEL, we took advantage of the latest epoxy technology to create a butter-smooth type of ACRAGLAS: • Nylon Derivatives are formulated in ACRAGLAS GEL, giving
vastly greater “thin strength”, shock resistance and stability
over normal temperature extremes.
• Slightly less shrinkage than that of ACRAGLAS, which has
an amazing 1⁄10th of 1%.
• 1-to-1 mixing ratio gives a stable, molecular lattice structure
to ACRAGLAS GEL that will not crack, craze or sugar-out as
will other 1-to-1 epoxies which do not have this structure.
Further, 1-to-1 mix ratio, by volume, simplifies mixing and
measuring small amounts accurately.
• Slightly longer pot life to give the user more time when doing
the actual bedding.
• Longer cure time - The molecular structure of ACRAGLAS
GEL has been controlled so that for the first few hours after
the epoxy sets it remains slightly flexible, making it easy to
trim away excess compound.
• Readily blends with atomized metal particles, making it possible for the user to create his own reinforced epoxy whenever
such type epoxy is desired.
• Can be dyed the same as ACRAGLAS to match the characteristics of the gun stock being worked on.
The above features of ACRAGLAS GEL give you an idea of
how completely we fulfilled your requests for a companion
product for ACRAGLAS…The ACRAGLAS GEL stay-in-one-spot
feature…sophisticated molecular structure…slightly longer pot
life and curing time…the ability to mix in metal, make this a
product we are proud to offer and which, of course, we guarantee
100% as to quality of product, or your money back.
RELEASE AGENT
For Precise Bedding
Pillar Alignment
®
Our traditional Release Agent and our new, easy-to-ship, NonFlammable Release Agent selectively lets ACRAGLAS GEL bond
to the stock but not to the barreled action. Both products present nearly identical physical characteristics, and are applied in
exactly the same manner to form a smooth, vinyl-like coating
between the bedding compound and metal. Non-Flammable
Release Agent can be transported by air, immediately upon request, safely and legally inside and outside the Continental U.
S.; no waiting for ground shipments to arrive when you need an
ACRAGLAS GEL kit, or extra release agent, in a hurry.
USING GLASS FLOC
The advantages of glass floc arealready incorporated in the
lattice, molecular structure of ACRAGLAS GEL, so the addition
of floc is not recommended or needed.
ATOMIZED METALS
Atomized (finely powdered) metals can be added to ACRAGLAS GEL to increase both tensile and compression strength,
along with higher impact resistance. This feature allows you to
duplex-bed guns using reinforced ACRAGLAS GEL where the recoil lug contacts the bedding and un-reinforced ACRAGLAS GEL
or ACRAGLAS for the less stressed areas of the stock. Atomized
metals can be added in ratios from 1 part metal to 4 parts mixed
bedding , up to 1:1 ratio of metal to bedding mix. We offer five
atomized metals: ALUMINUM - Very malleable with e xcellent
machinability for easy drilling, tapping, shaping; STEEL - Offers
a full 10% increase in tensile and compression strength over
un-reinforced bedding; requires metal working tools for trim-
order on the web
www.brownells.com
ming and shaping and is heavier than aluminum; STAINLESS
STEEL - All the attributes of steel particles but with a medium
gray finish and no fear of rust formation on surface of bedding.
ACRAGLAS GEL PRICES
ACRAGLAS GEL KIT: 2 fl. oz. (59 ml) Resin, 2 fl. oz. (59 ml)
Hardener, 7⁄8 fl. oz. (26 ml) Release Agent, Measuring Spoon, reuseable Poly Mixing Dish, Mixing Stick, Brown Dye, Black Dye
and Complete Instructions.
#081-014-004AK 2-GUN ACRAGLAS GEL 4 oz. Kit, 1H20X95. . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
#081-014-007AK 2-Gun ACRAGLAS GEL 4 oz. Kit,
Non-Flammable 1H25X30. . . . . . . . . . . 34.95
ACRAGLAS GEL SHOP KIT: 8 fl. oz. (237 ml) Resin, 8 fl. oz. (237
ml) Hardener, 3 fl. oz. (89 ml) Release Agent, Measuring Spoon
Set, 2 re-useable Poly Mixing Dishes, 25 Wide Mixing Sticks, 3
Paks Brown Dye, 3 Packets Black Dye, Instructions.
#081-017-016AK ACRAGLAS GEL 16 oz. Shop Kit, 5L47X60. . . . . . . . . . . . . . . . . . . . . . . . . $ 64.99
#081-017-017AK ACRAGLAS GEL 16 oz. Shop Kit,
Non-Flammable 5L48X22 . . . . . . . . . . . 65.99
BULK QUANTITIES
#081-015-004AK 4 oz. ACRAGLAS GEL 2 oz. Resin &
2 oz. Hardener, only 1H11X90 . . . . . $ 14.99
#081-017-116AK 16 oz. ACRAGLAS GEL, 8 oz. Resin &
8 oz. Hardener, only 1H36X29. . . . . . . . 44.99
#081-017-117AK 8 oz. Resin 1E21X96. . . . . . . . . . . . . . . 26.99
#081-017-118AK 8 oz. Hardener 1E19X99. . . . . . . . . . . 24.99
#081-017-128AK 1 Gallon ACRAGLAS GEL 64 oz. Resin &
64 oz. Hardener, only 1H122X96 . . . . 151.99
#081-017-129AK 64 oz. Resin 5L69X99. . . . . . . . . . . . . . . 87.99
#081-017-130AK 64 oz. Hardener 5L69X99. . . . . . . . . . . 87.99
#081-007-003AK 3 oz. Bottle Release Agent, 1E04X35. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99
#081-007-004AK 3 oz. Bottle Non-Flammable Acraglas,
Release Agent 1E04X35. . . . . . . . . . . . . . 5.99
#081-007-032AK Qt Bottle Release Agent, 5L19X75. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
#081-007-033AK Quart Bottle Non-Flammable Acraglas,
Release Agent 5L19X75. . . . . . . . . . . . . 29.99
#081-016-004AK Measuring Spoon Set 3K02X10. . . . . . 3.99
#081-020-006AK 6 oz. ACRAGLAS GEL Mixing Dishes,
per 10 1H07X03 . . . . . . . . . . . . . . . . . . . . 9.99
#081-001-050AK 50 Mixing Sticks 1H04U37. . . . . . . . . . 5.99
#083-001-005AK Brown Dye, 5 packets 3H04A50. . . . . . 5.99
#083-001-000AK Black Dye, 5 packets, 3H04A50. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.99
#081-021-004AK Atomized Aluminum, 5 oz. (142 g) net
weight 5L10X50 . . . . . . . . . . . . . . . . . . . 14.99
#081-021-104AK Atomized Steel, 12 oz. (340 g) net weight, 5L18X33. . . . . . . . . . . . . . . . . . . . . . . . . . 24.99
#081-021-204AK Atomized Stainless Steel, 12 oz. (340 g)
net weight 5L14X19. . . . . . . . . . . . . . . . . 19.99
BROWNELLS
. . . ONLY THE BEST . . . 439
PAGE BEDDING SUPPLIES
Lightweight
aluminum V- block eliminates receiver movement for improved accuracy from your Remington 700. Precision machined ridges
provide full contact and alignment with the receiver without
skim-bedding, plus allows interchangeability of similar barreled
actions, so you can use one stock for multiple rifles. Pre-drilled
to match factory hole spacing and eliminate time-consuming
machining and fitting. Serrated sides allow superior bedding
adhesion to the stock and a rock-solid installation. Available for
all short action (SA) and long action (LA) Remington 700 stocks
inletted for hinged floorplates and blind magazines. Fits right
hand actions only. a
b
SPECS: Aluminum, in-the-white. SA - 8¼" (21cm) long, 15⁄16" (3.3cm)
wide, ¾" (1.8cm) high. 4.3 oz. (122g) weight. LA - 91⁄8"(23.2cm) long,
15⁄16" wide, ¾" high. 4.5 oz. (128g) weight. Requires fitting and bedding to stock.
#100-004-039AK SA Aluminum Bedding Block, 3B111Y84. . . . . . . . . . . . . . . . . . . . . . . $ 131.99
#100-004-040AK LA Aluminum Bedding Block, 3B111Y84. . . . . . . . . . . . . . . . . . . . . . . . . 131.99
Brownells ACRAGLAS GEL
STOCK WORK
Specialized fixtures ensure the correct
relationships and tension between Barrel,
Receiver and Trigger group during bedding. “U”-bar holds triggerguard partially
open during bedding. Spacer centers barrel in channel and creates uniform stockto-barrel positioning. a
b
SPECS: “U”-bar - Steel, 15⁄8" (4.1cm) long, 11⁄16" (17.5mm) wide.
Garand Spacer - Aluminum, 11⁄8" (2.9cm) high, 11⁄16" (2.7cm) wide,
3
⁄8" (9.5mm) thick. M1A/M14 Spacer - Aluminum, 11⁄2" (3.8cm) diameter, 21⁄2" (6.3cm) long. Kits include Loop, Spacer, Instructions.
Combination Kit includes “U”-bar, M1 Spacer, M1A/M14 Spacer,
instructions.
#080-727-001AK Garand Bedding Kit 8K37A83. . . . . $ 49.99
#080-727-014AK M1A/M14 Bedding Kit, 8K32A66. . . . . . . . . . . . . . . . . . . . . . . . . . 39.97
#080-727-000AK Combination Bedding Fixture Kit, 8K68A28. . . . . . . . . . . . . . . . . . . . . . . . . . 89.95
VOLQUARTSEN CUSTOM RUGER® 10/22®
Brownells STEEL BED
Brownells
™
STOCK WORK
Application gun
sold separately
• Ultimate STEEL-BEARING Bedding
Compound For Wood & Fiberglass
Stocks
• 72% Stainless Steel For Superior
Bedding Strength
• Shrinks Less Than 1⁄10 of 1%
• No-Run Formula
• 1-to-1 MIXING RATIO,
Easy, Pre-measured System
Or Use Measuring Spoon
For Smaller Amounts
• Now With Black & Brown Dyes
• Stainless Steel Particles
CAN’T RUST or CAUSE RUST
On Adjacent Metal
• WON’T Compress, Crumble
Or “Sugar” Under Heaviest SemiAutomatic Or Magnum Recoil Impact
• Make Form-Fitting Vise Jaws • Strengthen Barrel Channels • Repair Jigs & Fixtures Too
• Shim Scope Mounts For Perfect Fit To Receiver • Pillar Bed Action & Floorplate • “Glue-In” Bedding
BEDDING SUPPLIES
ADJUSTABLE PILLAR BEDDING KITS
Stainless Steel-Filled Epoxy, Rifle-Bedding Compound
What is STEEL BED? Simply the most-advanced, toughestever bedding and stabilizing, steel-bearing, epoxy compound for
wood and fiberglass gun stocks. Designed specifically for GUNS,
to give the incredible impact resistance that’s possible only by
surrounding the action with a layer of solid, never-rust stainless steel and the skin-tight, epoxy-matrix fit so vital for superb
accuracy. Through a unique blending process, there’s actually
more stainless steel (by weight) than epoxy in STEEL BED - 21⁄2
times more steel than in competitive products. a
b
STEEL BED shrinks less than 1⁄10 of 1% and won’t compress,
crumble or “sugar” under the most punishing magnum or semiauto recoil. Fiberglass stockmakers use it to support the recoil
lugs of their lightweight mountain rifles; military armorers and
civilian shooters use it under the most grueling conditions without breakdown or deterioration.
We tested and abused STEEL BED every way possible and, once
we were convinced of its amazing superiority, test samples went
to armorers, gunsmiths and competitive shooters. They tested
STEEL BED in “real life” situations - it met and exceeded every
demand made of it! No cracking, crazing or “sugaring”. Group
sizes got smaller. All the guns tested - semi-auto, 1000 yard,
bolt-action match rifles, benchrest guns and hunting rifles - performed better after bedding with STEEL BED.
Available dyes include a brown color for wood stocks and a very
good black for synthetics. Or just paint STEEL BED along with
the synthetic stock. If you want the best possible color match on
a wood stock, you can use STEEL BED for recoil lugs and pillar
bedding and ACRAGLAS® or ACRAGLAS GEL® (which are more
easily dyed) in those places where the bedding will be visible.
STEEL BED really is the ultimate, steel-bearing bedding compound. Besides being incredibly strong and tough, it’s very easy
to use. The mixing ratio is a simple, 1-part Resin to 1-part Hardener, by volume, and the creamy, no-run texture means STEEL
BED will stay where it’s put.
STEEL BED KIT: (1) 11⁄2 fl. oz. (44 ml) net contents jar Resin; (1)
11⁄2 fl. oz. (44 ml) net contents jar Hardener; (1) 7⁄8 oz. (26 ml)
net contents jar Acraglas Non-Flammable™ Release Agent; (1)
Measuring Spoon, (1) Re-useable Poly Mixing Dish, (2) Mixing
Sticks (1) Brown Dye Pak, (1) Black Dye Pak and (2) Release
Agent Applicators; Instructions.
#081-040-003AK 2-GUN STEEL BED Kit 1H34X80. . $ 50.99
B
ROWNELLS
440
PAGE STEEL BED SHOP KIT: (1) 8 fl. oz. (237 ml) net contents jar Resin;
(1) 8 fl. oz. (237 ml) net contents jar Hardener; (1) 7⁄8 oz. (26 ml)
net contents jar Acraglas Non-Flammable™ Release Agent; (1)
Measuring Spoon Set, (5) Re-useable Poly Mixing Dishes, (25)
Mixing Sticks (5) Brown Dye Paks, (5) Black Dye and (25) Release Agent Applicators; Instructions.
#081-040-016AK STEEL BED Shop Kit 1H92X10 . . $ 121.99
STEEL BED BULK QUANTITIES:
#081-040-017AK 8 oz. Resin 1E35X96. . . . . . . . . . . . . . $ 44.95
#081-040-018AK 8 oz. Hardener 1E39X96. . . . . . . . . . . 49.95
#081-040-019AK 16 oz. STEEL BED, 8 oz. Resin and 8 oz.
Hardener only 1H75X00. . . . . . . . . . . . . 87.99
#081-040-064AK 64 oz. STEEL BED, 32 oz. Resin and 32 oz.
Hardener only 1H241X76 . . . . . . . . . . 309.99
Brownells ADJUSTABLE
PILLAR BEDDING SLEEVES
Inventory Just Two Sleeves
& Fit All Types Of Stocks
Contoured adjustment rings move on a
fully threaded shaft so you can size them for
an exact fit without cutting, filing or machinb
ing. Sold as a pair, long for Rear screw, short for Front screw. a
SPECS: Sleeve - steel, .296" (7.5mm) ID, 7⁄16"-20 tpi. Adjustment
Ring - aluminum, .560" (14mm) OD. Front - .700" (17mm) long. Rear
- 1.16" (2.9cm) long. Requires alterations to stock. Sold pairs only.
#080-910-000AK Adjustable Pillar Bedding Sleeves, 8K20D18. . . . . . . . . . . . . . . . . . . . . . . . . $ 25.99
Fast, Mistake-Proof Pillar Bedding
Convenient kit contains everything you need to pillar bed
one bolt action rifle. Includes our aluminum Adjustable Pillar
Bedding Sleeves with threaded steel sleeves that allow precise
adjustment to fit individual rifles, eliminating the need to specially machine a set of pillars for each rifle. Reversible design
allows sleeves to be used in flat- or round-bottomed receivers.
The pre-colored (brown) ACRA-BED™ bedding compound comes
in a convenient, easy-to-use cartridge application system. For
your first bedding project, purchase the reusable Application
Gun separately, then for future jobs, just purchase a new Bedding Kit. Kit also available with a 9⁄16" Forstner-type drill bit to
cut the recesses in the stock for the sleeves. a
b
SPECS: Application Gun must be purchased separately. Kit #1
contains 2 bedding sleeves, 1.6 fl. oz. (50ml) brown ACRA-BED™
cartridge, 2 mixing tips, 7⁄8 fl. oz. (26ml) release agent, 4 oz. (113g)
modeling clay, 2 application sticks, 2 brushes, and instructions. Kit
#2 contains everything in Kit #1 plus 9⁄16" (14.2mm) dia. wood drill
with 3⁄8" (4.7mm) dia. shank.
#081-060-003AK Pillar Bedding Kit #1 1H49U89 . . . $ 57.99
#081-060-004AK Pillar Bedding Kit #2 1H69U95 . . . . 84.99
#081-000-021AK Application Gun 1E23A95 . . . . . . . . . 29.99
#080-060-562AK 9⁄16" Wood Drill 8K29A47 . . . . . . . . . . . 36.99
#081-000-029AK Mixing Tips, 5-pak 1E06U75. . . . . . . . . 9.00
Brownells
PILLAR BEDDING SLEEVES
Ultimate Action-To-Wood Fit
For Superb Sporting Rifle Accuracy
Call Or Email Our
Full-Time Tech Staff
Brownells PILOTED FORSTNER BIT
Self-piloted bit cuts straight and clean; opens up existing
b
stock screw holes to accept 9⁄16" diameter bedding pillars. a
SPECS: Steel, blue. Bit - 5" (12cm) long, 9⁄16" (14mm) diameter,
1⁄
1
2" (12mm) dia. shank. Pilot - 1 ⁄2" (3.8cm) long, .312" (7.9mm) dia.
#080-909-000AK Piloted Forstner Bit, 8K85D10. . . . . . . . . . . . . . . . . . . . . . . . $ 109.99
SINCE 1939
BEDDING SLEEVES
Stable In Hot & Cold Weather;
Easy To Machine
Machined fiberglass bedding sleeves provide
a solid fit between bottom metal and action to maximize accuracy from a hunting or target rifle. G10 can’t corrode and is
highly resistant to dimensional changes from extreme heat or
cold conditions, so these sleeves won’t shift due to temperature
fluctuations. Easy to machine for custom stock work and fitting
to Remington or round-bottom actions. Work best when installed
using Brownells ACRAGLAS® family of bedding epoxies. Exterior grooves maximize gripping area for epoxy to guarantee that
even frequent disassembly won’t loosen these sleeves. a
b
SPECS: Machined G10 fiberglass. 9⁄16" (14mm) O.D., .3" (7.5mm)
diameter center hole (letter drill size N). Short - 1" (2.5cm) nominal
length; Long - 1½" (3.8cm) nominal length. Cut to fit. Instructions
included. Sold 1 per pak.
#080-000-742AK Short G10 Pillar Bedding Sleeve, 8K11Y99. . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99
#080-000-743AK Long G10 Pillar Bedding Sleeve, 8K11Y99. . . . . . . . . . . . . . . . . . . . . . . . . . 14.99
PARRISH REMINGTON 700
PILLAR BEDDING BLOCKS
Improves Accuracy; Contoured To
Fit The Round, Remington Receiver
Eliminate stock “crush” when tightening
guard screws by supporting the receiver on
these solid aluminum blocks. One end comes pre-contoured to
match the bottom radius of the Remington 600/700 series round
receivers. Deeply grooved blocks hold extra bedding compound
for a solid bond to the stock. Instruction sheet explains how to determine correct block length and install the blocks for maximum
accuracy gain. Easily adapted to any round-bottomed receiver,
or square up and use on flat bottoms too.
SPECS: Aluminum. 1.44" (36.5mm) long, .562" (14.3mm) diameter
body, .280" (7.1mm) diameter hole, pair weighs .7 oz (19.8g).
#720-200-700AK Pillar Bedding Blocks 2G09C49. . . $ 11.99
Brownells RUGER
77/M77® Mark II
BEDDING PILLARS
®
Strong, lightweight aluminum sleeves provide a rock-solid fit between bottom metal and action to maximize accuracy from your hunting or target rifle. Far more stable
than traditional stock-to-metal fitting methods, these sleeves
work best with ACRAGLAS® family of bedding epoxies. Exterior
grooves maximize gripping area for bedding epoxy to guarantee that even the most frequent disassembly won’t loosen these
sleeves. a
b
SPECS: Machined aluminum. 9⁄16" (14mm) diameter sleeve, .3"
(7.5mm) diameter center hole (letter drill size N). Short sleeve 1"
(2.5cm) nominal. Long sleeve 11⁄2" (3.8cm) nominal. Cut to fit. Sold
in pairs of Long, Short, or Combo of 1 each. Instructions included.
#080-000-417AK Short Pillar Bedding Sleeves, 8K09Z02. . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99
#080-000-418AK Long Pillar Bedding Sleeves, 8K09Z02. . . . . . . . . . . . . . . . . . . . . . . . . . . 11.99
#080-000-419AK Pillar Bedding Sleeve Combo, 8K09Z02. . . . . . . . . . . . . . . . . . . . . . . . . . . 11.99
Drill Holes For Pillar Bedding Without A Jig
QUESTIONS BEFORE YOU BUY?
Brownells G10 PILLAR
Faster, Easier &
More Precise Bedding
Pre-machined aluminum pillars
solve the problem of bedding Ruger bolt action centerfire rifles.
The front pillar is cut to match the 60° angle of the receiver screw;
pre-notched with the correct contour and angles to fit against the
bottom of the recoil lug to set square with the floorplate hinge. Fits
b
all Ruger 77 and M77 Mark II rifles except VT target models. a
SPECS: Aluminum, natural finish. Front - .600" (15.2mm) long, .535"
(13.6mm) dia. Rear - 1.145" (2.9cm) long, .535" (13.6mm) dia.
#080-000-007AK Ruger 77/M77 Mark II Bedding Pillars, 8K09A24. . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99
Brownells MAUSER 98
STOCK FERRULES
Ends Stock Crush, Increases Accuracy
A modern update of the original M98 rear,
triggerguard screw ferrule that prevented overtightening, maintained accuracy and kept the
stock from splitting. Perfect for fast, pillar bedding; our heavywall, stainless steel ferrule fits all M98 actions and can be easily adapted to fit any rifle action that uses .250" diameter, rear
stock screws. Can be shortened for front screw application. a
b
SPECS: 304S seamless tubing. 11⁄4" (3.1cm) long, .375" (9.5mm)
OD, .279" (7mm) ID. Sold 2 ea.
#080-911-098AK M98 Stock Ferrules 8K04D70 . . . . . . $ 6.99
HOLLAND REMINGTON 700
Brownells ACRA-WELD
™
BEDDING PILLAR SYSTEM
ADL
82°, tapered-head action screws self-center within the bedding pillar; keeps screw
shank from touching pillar and ruining accuracy. Hex head
screws allow for precise torquing; great looks. Pillars are counterbored to recess screw heads below the level of the stock for
added protection from damage. Pillars have deep grooves that
hold extra bedding material for a super strong bond. a
b
SPECS: Aluminum. 613" (15.5mm) diameter. .256" (6.5mm) diameter hole. ADL: 1.4" (3.5cm) and 1.3" (3.2cm) long. BDL: .85"
(.21.6mm) and 1.4" (3.5cm) long.Steel screws, black oxide finish.
#403-000-012AK ADL Bedding System 3K33T75. . . . $ 37.00
#403-000-017AK BDL Bedding System 3K34T48. . . . . . 37.50
Brownells ACRAGLAS
®
SOLVENT & THINNER
Great For Tool Cleanup & Special Mixes
Lets you thin all the Acra products to the exact
consistency needed for each job. Thin Acraglas to
“paint” the barrel channel for a moisture-proof seal,
or use as a super tough stock finish. Or, thin mixture
to fill cracks and voids. Great to clean up overruns from stock and
metal. Clean tools and bench after a bedding job. Removes unset
Acra products from hands and clothes. Doesn't affect hardened
strength. Won’t soften Acra products once they set. b
a
SPECS: 1 quart (946ml) can.
#083-022-032AK Acraglas Slvnt & Thnnr 5L16A48. . $ 21.99
Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
Brownells ACRA-RELEASE
™
Easy Release Agent For “Acra” Products
Brownells
ACRAGLAS® DYES
Dyes The Epoxy For Perfect Color
Traditional dyes actually mix with
any epoxy to give even, true color throughout. Use straight for
stock bedding or mix with White “Toner” to match wood for crack
repair or patching. When bedding fiberglass stocks that are to be
painted using our Camo Paints, the Brown, Jet Black and Camo
Green colors are a perfect match, so bedding lines won’t show.
Brown is also the same as in ACRAGLAS and ACRAGLAS GEL®
Kits. Use a very small amount of Jet Black to duplicate grip caps,
buttplates, etc., in casting molds. White “Toner” doesn’t cast pure
white; use to lighten other colors. a
b
SPECS: Packaged 1 fl. oz. (30 ml) dye in screw-cap plastic jar. TryPak contains 1 jar of each color.
STOCK #
COLOR
STOCK #
COLOR
#081-030-001AK Black
#081-030-003AK Brown
#081-030-002AK White
#081-030-004AK Green
— Advise # — ACRAGLAS Bulk Dye 5L08X55 . . . $ 10.95
#081-030-300AK ACRAGLAS Dye Try-Pak 1H25X60 . 34.95
The most sophisticated epoxy compound yet formulated for repairing,
restoring, filling and bonding wood,
metal, concrete, glass, and ceramics.
Our unique applicator gun makes it
to apply the precise amount you need.
Withstands vibration, oils, practically
all acids, solvents, and abrasion. Gapfilling formula means parts do not
have to fit perfectly for maximum bond. Can be colored using our
Water Soluble Dyes, Epoxy Black, or liquid ACRAGLAS® Dyes.
Working time of 15-20 minutes. a
b
SPECS: Set contains: 1 (one) 1.6 fl.oz. (50ml) ACRA-WELD cartridge, 2 mixing tips and application gun. Refill Kit contains: 1 (one)
1.6 fl.oz. (50ml) ACRA-WELD cartridge, 2 mixing tips.
#081-025-003AK ACRA-WELD Kit 1H35U88. . . . . . . . $ 44.99
#081-025-004AK ACRA-WELD Refill Kit 1H12U91. . . 15.99
#081-000-021AK Application Gun, only 1E23A95. . . . . 29.99
Brownells ACRA-QUICK
™
& ACRA-20™
Mixes Perfectly, Hardens Fast,
Holds Like Iron
Our revolutionary ACRAQUICK/ACRA-20 family of
two-part epoxies is unmatched
for strength, hardening speed,
and their ability to bond to almost any material. They bond
to wood, metal, ceramics, and
most plastics with all the famous strength and holding
power of ACRAGLAS. Once
cured, they’re virtually impervious to the effects of moisture,
sunlight, frigid temperatures, solvents, detergents, and most
chemicals. Unlike lesser adhesives, they will not shrink, crack,
or weaken over time. All ACRA epoxy formulas harden strong
enough to handle in minutes and cure to full strength in 24
hours. And, they all dry clear, except ACRA-QUICK STAINLESS
GEL, which hardens gray. a
b
Standard ACRA-QUICK 3-MINUTE EPOXY has a mixed working time of 2-3 minutes and is strong enough to handle 5 minutes
after application (at 70˚F). ACRA-QUICK and ACRA-20 are semifluid formulas that flow well, fill gaps, and get into those hard-toreach spots. ACRA-20 has a longer, 15-20 minute working time
and reaches handling strength in 60 minutes. It will set up in
temperatures down to 0˚F, and it can be colored with any of our
ACRAGLAS dyes. ACRA-QUICK GEL and ACRA-QUICK STAINLESS GEL set up in 3-5 minutes, and their no-drip formulas
are perfect for repairs where gravity works against you. STAINLESS GEL contains stainless steel for extra density, incredible
strength, and superior impact resistance. Reusable, no-mess,
application gun automatically blends the resin and hardener to
a perfect 1-to-1 ratio as you apply it.
SPECS: Each kit contains: 1.6 fl. oz. (50 ml) epoxy cartridge (AcraQuick, Acra-Quick Gel, Acra-Quick Stainless Steel Gel, or Acra-20,
depending on kit), 2 mixing tips, 1 application gun.
#081-000-023AK Acra-Quick Kit 1E33C56. . . . . . . . . . $ 41.95
#081-000-025AK Acra-Quick Gel Kit 1H33C56. . . . . . . . 41.95
#081-000-026AK Acra-Quick Stnl. Gel Kit 1H33C56. . . 41.95
#081-000-024AK Acra-Quick 20 Kit 1H35C87. . . . . . . . 44.99
REPLACEMENT ACRA PRODUCTS
#081-000-017AK 50 ml Acra-Quick w/2 Mixing Tips, 1H12A85. . . . . . . . . . . . . . . . . . . . . . . . . $ 15.99
#081-000-018AK 50 ml Acra-20 w/2 Mixing Tips, 1H10A75. . . . . . . . . . . . . . . . . . . . . . . . . . 13.45
#081-000-019AK 50 ml Acra-Quick Stainless Gel,
w/2 Mixing Tips 1E10A75. . . . . . . . . . 13.45
#081-000-020AK 50 ml Acra-Quick Gel w/2 Mixing Tips, 1H10A75. . . . . . . . . . . . . . . . . . . . . . . . . . 13.45
#081-000-021AK Application Gun 1E23A95 . . . . . . . . . 29.99
#081-000-029AK 5-Pak Mixing Tips 1E06U75. . . . . . . . . 9.00
ITW PHILADELPHIA RESINS
ACRA-BED™ PRE-COLORED EPOXY
For Fast Bedding
& Stock Repairs
“ G o o f - p r o o f ”
epoxy
formula
makes small bedding jobs and
stock repair easy
for beginners and
busy professional gunsmiths alike. The convenient application
gun automatically mixes the resin and the hardener as you apply a precise amount of Acra-Bed exactly where you need it—no
mess, no waste. Thick, smooth consistency makes it stay put, and
a 20-minute work time lets you position parts and work the product into place before it sets. Hardens to the touch in 12 hours;
cures completely in three days. Comes in two colors: a “walnutty”
medium brown that blends with most wood stocks, and black to
match popular black, synthetic stocks. Use the non-flammable
release agent to prevent the epAKoxy from bonding where you
don’t want it to stick. a
b
SPECS: Kit contains application gun, 1.6 fl. oz. (50ml) Acra-Bed car1⁄
tridge, 4 fl. oz. (7.4ml) release agent, 2 mixing tips, and instructions.
Refill Pak contains 1.6 fl. oz. Acra-Bed cartridge and 2 mixing tips.
#081-042-014AK Brown Acra-Bed Kit 1H33A56. . . . . $ 41.95
#081-042-013AK Black Acra-Bed Kit 1H33A56. . . . . . . . 41.95
#081-042-011AK Brown Acra-Bed Refill Pak, 1H14A76. . . . . . . . . . . . . . . . . . . . . . . . . . 16.99
#081-042-012AK Black Acra-Bed Refill Pak, 1H11A96. . . . . . . . . . . . . . . . . . . . . . . . . . 14.95
Brownells ACRAGLAS
®
PROFESSIONAL BEDDING SYSTEM
MARINE-TEX
Handy Size, Ready To Mix & Use
High strength epoxy plugs holes, seals
cracks and makes repairs in wood, aluminum, and steel. Putty-like consistency, will
not run or drip. Impervious to solvents.
Virtually no shrinkage or expansion. b
a
SPECS: 5-to-1 mix ratio. 30-40 minute work
time. Hardens in 4-5 hrs. Contains resin, catalyst, mixing cup, mixing stick, instructions.
32 oz. size does not include cup or stick.
#904-301-002AK 2 oz White Marine-Tex 4K10V42. . . $ 17.49
#904-301-102AK 2 oz Gray Marine-Tex 4K09V59. . . . . 15.99
#904-303-014AK 14 oz White Marine-Tex 4K28V76. . . 38.99
#904-303-114AK 14 oz Gray Marine-Tex 4K28V76. . . . 38.99
904-304-001AK 32 oz Gray Marine-Tex 4K66V42. . . . 85.99
DEVCON® EPOXY METALS
Putty Or Liquid
For Strong, Machinable Rifle Bedding
Two-part epoxy forms maximum-strength
rifle bedding, and helps repair non-critical
metal parts. Fills voids, cracks and machine
marks; excellent bonding strength for many
wood-to-metal and metal-to-metal applications. Machinable after 4 hours; fully cures in 16 hours, or reduce
cure time by applying heat per the manufacturer’s instructions.
Highly resistant to chemicals and acids. Steel, Aluminum and
Titanium available as putty. Steel also available as liquid for
easy flow into tight areas, and making molds, fixtures and light
gauge forming dies. Steel Putty and Titanium Putty meet MilSpec DOD-C-24176B(SH), Steel Liquid meets Mil-Spec MMMA-1754, and Aluminum Putty meets Mil-Spec DOD-C-24176B.
SPECS: Steel Putty - 1 lb. (454g) resin, 3.4 oz.(96.4g) hardener.
Steel Liquid - 1 lb. resin, 2.6 oz. (73.7g) hardener. Aluminum Putty
- 1 lb. resin, 3.3 oz. (93.6g) hardener. Titanium Putty - 1 lb. resin,
4.6 oz. (130.4g) of hardener. All include instructions.
#262-100-101AK Epoxy Steel Putty 2F00PUA . . . . . . $ 36.99
#262-100-102AK Epoxy Steel Liquid 2F38B49. . . . . . . 38.99
#262-000-001AK Epoxy Aluminum Putty, 2F60P89. . . . . . . . . . . . . . . . . . . . . . . . . . 63.99
#262-000-002AK Epoxy Titanium Putty 2F101P75. . . 101.99
Brownells TRIGGER
GROUP BEDDING BLOCK
The industry-standard stock bedding compound for more than
a generation, Acraglas is now available in a full-featured kit with
everything the professional gunsmith needs for taking on almost
any-size bedding or repair job. Available with original-formula
Acraglas, the hard, durable, non-shrinking bedding and accurizing compound preferred by riflesmiths all over the world, or longer-curing Acraglas Gel, with its butter-smooth consistency that
won’t run, drip, or leach, and a stable, molecular lattice structure
that won’t crack, craze, or “sugar out.” These self-contained kits
come with everything you need to get the job done—except the rifle. Both include plenty of hardener, dyes, release agent, solvent/
thinner, measuring/mixing cups, applicators, masking materials, and instructions. You also get fast-setting Acra-Quick™ and
Acra-20™ two-part epoxies for fast repairs. Acra-Quick/Acra-20
are unmatched for strength, hardening speed, and their ability
to bond to almost any material, including wood, metal, and plastics with all the famous strength and holding power of Acraglas.
The kit also includes the reusable, “goof proof” applicator gun
that automatically mixes epoxy and hardener in to a precise
1-to-1 ratio for proper bonding as you apply it to the work area.
All of this comes packed in a convenient, go-anywhere “ammo
box” carry/storage case. a
b
SPECS: Both kits contain 16 oz. Acraglas solvent/thinner, 3 oz. release agent, 14 oz. Acra-Release aerosol, 50 ml Acra-20 cartridge,
50ml Acra-Quick cartridge, applicator gun, 1 oz. brown dye, 1 oz.
black dye, 16 oz. masking clay, (100) mixing sticks, (50) 1 oz. mix-
order on the web
www.brownells.com
Replaces The Trigger
Assembly During Bedding Jobs
Solid Delrin® block takes the place of the trigger
assembly so you don’t have to fill yours with clay, or wrap it with
tape - and then clean all that up after bedding - to keep bedding
compound out when ’glas bedding your stock. Just remove your
trigger assembly, attach the blank and spray with release agent.
Simple to install, quick and mess-free to remove. a
b
SPECS: Delrin , white. Remington 700 - Approx. 11⁄2" (3.8cm)
1⁄
29⁄
wide, 2 4" (5.7cm) high, 64" (11.5mm) thick; Mauser 98 will vary.
#080-000-206AK Rem. 700 Trigger Group Bedding Block, 8K22V98. . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99
#080-000-207AK Mauser 98 Trgr Group Bedding Block, 8K23V27. . . . . . . . . . . . . . . . . . . . . . . . . . 29.99
®
ing cups, (25) applicator swabs, (12) applicator brushes, (2) epoxy
mixing pads, 36 yds. 2" bedding tape, 12 ft. surgical tubing, and
instructions, all packed in a tough, molded-polymer carrying case
with lift-out tray. Acraglas Kit includes 28 oz. Acraglas resin, 7 oz.
Acraglas hardener, 8 oz. Acraglas floc, and (4) measuring spoons.
Acraglas Gel Kit includes 8 oz. Acraglas Gel resin, 8 oz. Acraglas
Gel hardener, and (10) 8 oz. plastic mixing cups
#080-000-633AK Prof. Acraglas Bedding System, 8K171Y89. . . . . . . . . . . . . . . . . . . . . . . $ 205.95
#080-000-634AK Prof. Acraglas Gel Bedding System, 8K172Y13. . . . . . . . . . . . . . . . . . . . . . . . 212.99
BROWNELLS
. . . ONLY THE BEST . . . 441
PAGE BEDDING SUPPLIES
Specially formulated to apply easily, yet gives
sure, positive release for all “Acra” products in
all types of bedding under varying conditions. (You
still have to cover all surfaces with it!!) Ideal for irregular shapes. Cuts cleanup time. Recoats missed
areas easily. Will not affect fit/tolerances. Clear, but
stays “oily” so you can both see and feel the coverage. Wipes off metal and cured epoxy with 1,1,1
Trichloroethane. Works great with all our epoxies: ACRAGLAS®, ACRAGLAS GEL®, STEEL BED™,
a
ACRA-WELD™, ACRA-QUICK™, and most others! b
SPECS: 16 fl. oz. (473 ml) Aerosol.
081-028-000AK ACRA-RELEASE Aerosol, 1H20U10. . . . . . . . . . . . . . . . . . . . . . . . . $ 31.99
The Best Possible Epoxy
In An Easy-To-Use Applicator
Brownells
STOCK WORK
Self Centering Action Screws
Improve Accuracy
CARTRIDGES
Brownells
SCORE HIGH REMINGTON 700
STOCK WORK
STOCK BEDDING BLOCK KIT
Eliminates Bedding
Disasters;
Provides A Clean,
Professional Look
Aluminum filler blocks
replace the Remington 700
bottom metal to prevent epoxy overflow that can cause
parts to be permanently bonded to the stock. CNC machined to
slightly oversize dimensions to ensure original or custom parts
fit stress-free with little to no extra cleanup. Produces a straight,
flat, bedded surface that looks custom-molded for a truly professional look. BDL Kits include filler blocks for both the magazine
well and the floorplate assembly to allow bedding the sides of
the magazine well if desired. Filler blocks remove easily after
the bedding has hardened; simply tighten the extraction screws
against the provided bolt recess rod. Models for BDL short (SA)
and long action (LA) rifles available. ADL includes a filler block
to replace the triggerguard on ADL short and long actions. Extra
long screw provides leverage to gently lift out the block after
bedding. ADL/BDL Kit includes all filler blocks for bedding ADL/
BDL short and long action rifles. a
b
SPECS: 6061 aluminum filler blocks, bead-blasted finish; steel,
blued hardware. BDL Kit includes floorplate block, magazine block,
11⁄
16" dia. bolt recess rod, hardware and Allen wrench. ADL includes
triggerguard block and hardware. ADL/BDL Kit includes all blocks
and hardware for ADL and BDL short and long action.
#804-000-013AK BDL Bedding Block Kit, SA, 4K00DZA . . . . . . . . . . . . . . . . . . . . . . . . $ 85.00
#804-000-012AK BDL Bedding Block Kit, LA, 4K00BXC . . . . . . . . . . . . . . . . . . . . . . . . . 85.00
#804-000-011AK ADL Bedding Block, SA/LA, 4K00PUA . . . . . . . . . . . . . . . . . . . . . . . . . . 19.95
#804-000-010AK ADL/BDL Bedding Block Kit, 4K00ZAY. . . . . . . . . . . . . . . . . . . . . . . . . 195.00
Brownells SURGICAL TUBING
STOCK FINISHING SUPPLIES
BEDDING SUPPLIES
Constant Pressure To Hold Where
You Want It - How You Want It
The stretchiest, pullingest, selftightening clamp you can buy…
Pure Gum Surgical Latex Tubing!
Wrapped around a split gun stock,
it will draw the glue line so thin it
looks like part of the grain, with no
“clamp marks” in the wood and no slipping or pulling-off of the
joint. For holding all irregular surfaces it is unsurpassed - gluing, forming, jigging, aligning - use the Pulling Power of surgical tubing. (It also makes excellent slingshot rubbers.) Use
no knots. Tuck over one end and wrap over it, as shown, when
pulling the tube around the part being held. Make the final tuck
as shown. A small wedge or wood dowel simplifies making this
final tuck. Guaranteed to hold!
Choate’s Rifle Shop, Palmdale, CA., reports, “I have been using
my piece of tubing for 8 years and repaired stocks split end-toend using ACRAGLAS®. It will stick to ACRAGLAS, but pulls
right off with no damage to the tubing. Use it for forend tips, grip
caps, cracked and split stocks …”
Stocked in 2 weights. Type A is for light, multiple wrap jobs.
Type B is for long pull or where greater tension is desired.
SPECS: Type A - 1⁄8" (3.2mm) I.D., 1⁄4" (6.3mm) O.D. Type B - 3⁄16"
(4.8mm) I.D., 5⁄16" (7.9mm) O.D.
#084-076-001AK Type A Surgical Tube 12 ft., 4H11T00. . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99
#084-076-002AK Type B Surgical Tubing 12 ft., 4H11T73. . . . . . . . . . . . . . . . . . . . . . . . . . . 17.99
SAVE! WHEN YOU BUY IN BULK
TALK TO ONE OF OUR HELPFUL ORDER TAKERS
B
ROWNELLS
442
PAGE BEDDING/MASKING TAPE
Extra-Heavy Duty For Abrasive Blasting
High-density, PVC tape easily protects carefully polished sides of 1911 Auto slides, pistol
frames, or shotgun and rifle receivers from abrasive grit in the blast cabinet. Withstands high
blast pressures up to 100 psi.
SPECS: Black, available in 1" (2.5cm) wide x 36 yds (33m) long or
2" (5cm) wide x 36 yds long rolls.
#084-092-101AK 1" Bedding/Mask Tape 4H05V89. . . $ 10.99
— 3 or More — 1" Bed/Mask Tape, each 4H00VBX. . . . 4.70
#084-092-001AK 2" Bedding/Mask Tape 4H11V87. . . . 16.99
— 3 or More — 2" Bed/Mask Tape, each 4H09V09 . . . 16.95
PASCO .010" PIPE WRAP TAPE
Exact Spacing When Free-Floating Barrels
Each layer of tape is exactly .010" thick
and provides a nice, uniform gap to properly
float barrels to improve accuracy by eliminating stock-to-barrel pressure. Can also be
used when bedding lugs.
SPECS: 100 feet (30.5m) long roll, 2" (5.1cm) wide, .010" (.25mm)
thick.
#100-001-354AK .010" Pipe Wrap Tape 1A04D63. . . . . $ 5.99
MODELING CLAY
Easily and Cheaply Fill Action
Recesses Re-use Clay Filler Over & Over
Use this simple, inexpensive clay to prevent bedding headaches! Fill recesses or
voids around the triggerguard, magazine cut, or any machine
cuts ahead of or behind the recoil lug. Prevents bedding material filling those voids and making action removal very difficult!
SPECS: Light tan color, non-drying, regular consistency; eight 4 oz.
(113g) sticks per pak. 2 lb. (.9 kg) total weight.
#046-100-002AK Modeling Clay 4A07Y63 . . . . . . . . . . $ 14.99
Brownells STOCK REPAIR PIN KIT
Use With ACRAGLAS ,
ACRA-QUICK™ or
ACRA-20™
For Stronger-Than-New
Repairs On
Cracked/Split Stocks
®
With this Kit, plus
ACRAGLAS and a varispeed drill, you can do
quick, easy, sure-to-hold
repair jobs on cracked or broken stocks. Pins go in easily, won’t
further split the stock; cannot pull or shoot out; can be cut off at
any length. Made of “half- hard” brass alloy. 60° flat-top threads
for best holding. After broken surfaces are coated with ACRAGLAS and clamped tightly, drill pin hole with drill provided. Coat
pin with ACRAGLAS also, and run it into hole with vari-speed
drill at slow speed. After cured, cut off and dress ends. a
b
SPECS: 2 1⁄2" (6.3cm) overall length with 2" (5.1cm) threaded. Kit
1
3
contains: 12 each of ⁄8" (3.2mm) and ⁄32" (2.4mm) Stock Repair
Pins, plus (1) 1⁄8" (3.2mm) & (1) 3⁄32" (2.4mm) jobber length drills.
#080-565-000AK Stock Repair Pin Kit 8K25Y37. . . . $ 35.99
#080-565-125AK 12, 1⁄8" Stock Repair Pins 8K17Y27. . . 27.99
#080-565-093AK 12, 3⁄32" Stock Repair Pins 8K14Y64. . 31.71
Brownells EPOXY MIXING PADS
Always Have A Clean
Mixing Surface
Brownells REUSABLE SYRINGES
Accurate Dispensing Of ACRAGLAS ,
ACRAGLAS GEL , Wood Glues & Greases
®
®
Put just the right amount of cutting compounds or greases exactly
where you want them. Great for
getting into tight places. Clean up
easily; use again and again. TryPak has 2 of each size.
SPECS: Polypropylene, 10cc - 5 1⁄4"
11⁄
(13.3cm) overall, 16" (17.5mm) dia. 30cc - 6 1⁄4" (15.9cm) overall, 1"
(2.5cm) dia. 50cc - 7 1⁄2" (19cm) overall, 11⁄4" (3.2cm) dia.
#081-100-610AK 10cc Syringe, 6-pak 1H09U37. . . . . . $ 14.99
#081-100-630AK 30cc Syringe, 6-pak 1H11U98. . . . . . . 14.99
#081-100-650AK 50cc Syringe, 6-pak 1H14U95. . . . . . . . 19.99
#081-100-000AK Syringe Try-Pak 1H11U99. . . . . . . . . 14.99 Brownells “LITTLE BITTY” CUPS
No-Mess, No-Waste, Small Quantity Mixing
Accurately measure and mix smaller
amounts of our fine family of Acra™ Bedding
Products for stock repairs or quick f ixes, without waste, in these strong, plastic, medicine
cups.
Also, perfect working containers for
small amounts of paint, stain, stock finish, cold
blue or any non-trichlor- or non-TCE-based gunsmithing liquids.
Graduations clearly marked in drams, ounces, cc’s, milliliters,
and tablespoons for convenience and ease of measuring. a
b
SPECS: 1 fl. oz. (30 ml) plastic cups packaged in bags of 25 each.
#081-010-125AK “Little Bitty” Cups 1H04X92. . . . . . . $ 6.99
Brownells OLD FASHIONED WHITING
Quickly Draws Excess OilOut Of Gun Stocks
Simple “paint-it-on, brush-it-off” process literally draws soaked-in grease and oils out of any
oil-finished or oil-soaked gun stock. Especially
useful on military stocks. Same method as described in the traditional gunsmithing books and just as effective
now as then. Just make a thin paste of Whiting and methanol or
TCE, acetone, or toluene and paint it onto the stock, then brush
if off after it dries and darkens with oil. Warming gently speeds
process. Repeat if needed. a
b
SPECS: 1 lb. (454 g) or 3 lbs. (1.4 kg) net weight.
#083-032-100AK 1 lb. Whiting 5L06A71. . . . . . . . . . . . . $ 8.99
#083-032-300AK 3 lb. Whiting 5L10A10. . . . . . . . . . . . . 14.45
CERTISTRIP
Sanding media developed especially
for wet sanding of wood finishes to get
the Dull London look, or on steel before
polishing. Great on 1911 frames and
slides, too. Works great wet or dry. Silicon carbide grain; strong, waterproof,
backing paper. a
b
SPECS: 9" (22.9cm) x 11" (27.9cm).
STOCK #
GRIT
STOCK #
GRIT
#657-250-220AK 220
#657-250-400AK
400
#657-250-320AK 320
#657-250-600AK
600
— Advise # — 50 Sheets Durite, one grit, not asst., 7E00BXC. . . . . . . . . . . . . . . . . . . . . . . . $ 68.08
DOUBLE ULTRA-FINE 1200 GRIT WET OR DRY PAPER - For
folks wanting the “high-shine” finishes. Follow with our Five “F”
Compound for an eye-popping gleam.
SPECS: 12" (30.5cm) x 12" (30.5cm) sheets. 1200 grit.
#657-251-900AK 1200 Grit Durite, 5 or more sheets, each, 7E00UAV . . . . . . . . . . . . . . . . . . . . . . . . . $ 2.75
SATELLITE CITY HOT STUFF
INSTANT GLUE
Repairs Wooden Stocks, Fixes Gun Parts
In As Little As Five Seconds
Quick bonding, industrial-grade, cyanoacrylate adhesives make short work of clear finish
filling, fiberglass and wooden stock repairs,
sight mounting and general shop work. Bonds
almost instantly to leather, vinyl, rubber, wood, laminates, plastic, fiberglass and Kevlar. Most repairs require only a drop. Original Formula - ultra thin; wicks into the smallest crack and bonds
in only five seconds. Use to make invisible repairs on wooden
stocks, and fill chips in clear finishes. Super “T” - Thick consistency to fill gaps and voids on rough surfaces. 10 to 25 second
working time. a
b
SPECS: 1 oz. (28 g) or 2 oz. (28 g) wt. Applicator tip bottles.
#862-000-001AK 1 oz. Hot Stuff 2F04P83. . . . . . . . . . . . $ 5.99
#862-100-002AK 2 oz. Hot Stuff 2F07P69. . . . . . . . . . . . 10.99
#862-000-004AK 1 oz. Super “T” 2F04P99. . . . . . . . . . . . 6.99
#862-101-002AK 2 oz. Super “T” 2F07P51. . . . . . . . . . . 10.99
#862-110-000AK Instruction Book . . . . . . . . . . . . . . . . . . NC
NCF QUICK AEROSOL ACCELERATORS - Forces Hot Stuff and
Super T to cure instantly for a super-tough bond. Stays active for
up to three minutes. Low-evaporation, long shelf-life formula.
#862-000-007AK 6 oz. Quick Accel. 2F09P11. . . . . . . . $ 16.99
Cannot ship outside Continental U. S. Ship UPS or FedEx Ground only within U.S.
The most potent stripper we’ve found. Fast,
easy-to-use. Water cleanup. Works like honestto-goodness magic in removing those incredibly tough epoxy finishes. Minimal grain raising; requires only light sanding before refinishing. Wear rubber gloves. Use adequate ventilation. Apply with a natural bristle brush. b
a
SPECS: 1 qt. (32 fl. oz./946 ml) and 1 gal. (128 fl. oz./3.8 L) containers.
#173-100-032AK 1 Quart Certistrip 5L23D35. . . . . . . $ 36.99
#173-100-125AK 1 Gallon Certistrip 8K84D62. . . . . . 122.99
Slick, plasticized paper glued on two edges so it won't curl up. Use
the top one, tear it off, toss it, and there’s a fresh one waiting. a
b
SPECS: 4" (10.2cm) x 4". 100 sheets per pad. Sold per 3 pads.
#081-031-003AK Epoxy Mixing Pads, 1H07X25. . . . . . . . . . . . . . . . . . . . . . . . . $ 10.99
SINCE 1939
When Wet Or Dry Paper
Is A Must - Durite Is The Answer
SUPER SOLVENT - ALWAYS have on hand, just in case you glue
your fingers together. Dissolves fully cured Hot Stuff glues.
#862-105-002AK Super Solvent 2F06P24. . . . . . . . . . . . $ 9.99
Heavy Duty - So Tough It Even Strips
Remington and Browning Epoxy Finishes
DURITE WATERPROOF
REPLACEMENT TIPS - Hot Tips replace clogged bottle tips; extra
friction snap caps included. Pro-Tips - Very fine tip applicators
for jobs that require only a tiny amount of adhesive applied to a
specific area. Friction fits over the top of the standard tip.
#862-106-000AK Hot Tips, box of 2 2F01P92 . . . . . . . . . $ 4.99
#862-107-000AK Pro-Tips, box of 12 2F01P56 . . . . . . . . . 4.99
STOCK IRON
Just The Right Size &
Shape For Raising Stock Dents
Hold this teflon-coated, professional
quality, stock iron close to a dampened stock
to quickly create the steam needed when raising dents. Compact, angled head and long, plastic handle give
precise control. Variable heat control gives just the right temperature. Heavy-duty for continuous use.
SPECS: 115v. 165 watts. 15⁄8" (3.2cm) x 4 3⁄4" (12cm) head.
#875-100-002AK Stock Iron 5G23Z42. . . . . . . . . . . . . . $ 33.99
Brownells
PETER VANDERHAVE
MILITARY STOCK STAIN
Mix & Match Military Stock Colors
Save Marred & Gouged Stocks
Touch the shellac stick to a hot knife, work into a scratch, let
harden, sand. a
b
SPECS: 7" (17.9cm) long x 1⁄2" (12.7mm) wide x 1⁄4" (6.3mm) thick.
#080-528-521AK Light Walnut Shellac Stick,
4K11D94. . . . . . . . . . . . . . . . . . . . . . . . $ 18.99
#080-528-522AK Dark Walnut Shellac Stick, 4K13D55. . . . . . . . . . . . . . . . . . . . . . . . . . . 18.99
#080-528-025AK Transparent Shellac Stick, 4K13D55. . . . . . . . . . . . . . . . . . . . . . . . . . . 18.99
WALNUT FINISH REPAIR KIT
All-Finish “Hot” Repair
Sticks In Colors
Fill voids, fix scratches,
dents and gouges in walnut stocks with these sticks plus a pallet knife and a heat source. a
b
SPECS: 6" (15.2cm) long x 3⁄8" (9.52mm) high x 3⁄4" (19mm) wide.
Kit contains one of each shade listed below, plus two additional
shades.
#826-775-105AK Dark Walnut Repair Stick, 8K00YTP. . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99
#826-775-119AK Walnut Repair Stick, 8K00AVB . . . . . . . . . . . . . . . . . . . . . . . . . . 6.99
#826-775-168AK American Walnut Repair Stick, 6B00PUA . . . . . . . . . . . . . . . . . . . . . . . . . . 6.99
#826-775-000AK Finish Repair Kit 6B00AVB. . . . . . . . 23.99
Brownells SHEET FELT PADS
For Polishing Pads,
Vise Jaws; Three Densities
Great for rubbing, polishing,
and hand buffing on wood or
metal. Soft for tight curves; Medium for rounded and gradual
curves; Hard for flat surfaces. b
a
SPECS: 2" (5.1cm) x 4" (10.2cm)
x 1⁄4" (6.3mm). Wool felt.
#839-295-301AK 3 Soft Felt Pads 9C00XCH . . . . . . . . . $ 7.85
#839-295-302AK 3 Medium Felt Pads, 9C00ZAY. . . . . . . . . . . . . . . . . . . . . . . . . . . 8.99
#839-295-303AK 3 Hard Felt Pads, 9C00PUA . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.99
#839-295-000AK Asst. Felt Pads, 1 pad ea. of above densities, 9C00UAV . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.99
Brownells
WATER-SOLUBLE DYE
Get The Color Needed To Match
Or Bring Out Beauty Of Wood
PILKINGTON CLASSIC SPIRIT STAINS
Original Factory Colors For Classic Results
Use the same rich, clear-colored stains as Master Gun Builder Phil Pilkington does to match the
look and luster of classic guns. Special solvent
minimizes grain raising, lets these stains mix
with most stock finishes for big time-savings, better final job.
SPECS: 2 fl. oz. (59 ml) glass bottles. Stain in three
colors: Pre-’64 - Reddish brown like older U.S. guns.
English Red - More red like English/ European guns.
Gold & Brown - Same look as old acid stain, works
wonders on curly maple and walnut. Thinner - Used to thin stains.
STOCK #
COLOR
STOCK #
COLOR
#703-300-204AK Pre-’64
#703-300-104AK Gold & Brown
#703-300-304AK English Red
— Advise # — Classic Spirit Stain 3K00XCH. . . . . $ 23.00
#703-300-904AK Stain Thinner 3K00PUA. . . . . . . . . . . 22.25
R. GALE LOCK CO. GUN STAIN
Penetrates Without Raising The Grain
Traditional, spirit-based stains for less sanding and faster recoats. Beautiful, vibrant colors
compliment the finest hardwoods.
SPECS: 4 fl. oz. (118 ml) resealable bottle. DarkWalnut - very dark, great on birch and maple stocks.
Early American - a medium dark walnut with red
highlights.1776 Antique - red/yellow highlights.
Gives curly maple an antique look. Good for pre-'64
Winchester. 1787 Golden - gold/yellow-brown highlights. Enhances walnut and curly maple. 1864 English - with soft brown/yellow
tones, lighter than Golden. 1884 Black - dark chocolate brown with
yellow highlights. Has less black than Dark Walnut.
#346-069-004AK Dark Walnut 6D00YTP . . . . . . . . . . . $ 22.99
#346-165-004AK Early American Walnut 6D00AVB. . 22.99
#346-177-604AK 1776 Antique Walnut 6D00CHD . . . . 22.99
#346-178-700AK 1787 Golden Walnut 6D00YTP. . . . . . 22.99
#346-186-400AK 1864 English Walnut 6D00AVB. . . . . 22.99
#346-188-400AK 1884 Black Walnut 6D00CHD . . . . . . 22.99
Looking for a DEAL?
Go online and click on our SALE page banner!!
STOCK & CHECKER OIL - Waterproof, low sheen,
London-type oil finish is ultra thin to soak in deep
and seal the open poors of the wood. Use as a stock
finish or to seal freshly cut checkering. Will not
plug up the diamonds or become yellowish in time.
Contains no silicas or pigment fillers. a
b
#241-820-002AK Dem-Bart Oil, 1D05P36. . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99
BROWNELLS STOCK RUBBING KIT - All
the right materials so you can produce
incomparable, hand-rubbed stock finishes that have been a part of fine custom gun making for generations. Plus,
works to restore dull, worn finishes. a
b
SPECS: Kit contains 1 pt. (16 fl. oz./473 ml)
linseed oil, 8 oz. (227 g) rottenstone, (3) 4"
(10.cm) x 2" (5cm) x 1⁄4" (6.35mm) medium
felt pads and instructions.
#083-038-000AK Stock Rubbing Kit 3H21U68. . . . . . $ 29.99
ROTTENSTONE - Genuine, triple fine, Rottenstone powder. The same that’s been used by
professional stock finishers for generations. Mix
with linseed oil; becomes a fast, but fine-cutting
abrasive that’s easily worked over the finish with
a felt pad. Use on fully dried finishes only. a
b
SPECS: 3F grade. Plastic jar. 8 oz. (227 g) and 1
lb. (454 g).
#083-039-008AK 8 oz. Rottenstone 5L09U92. . . . . . . . $ 13.99
#083-039-016AK 1 lb. Rottenstone 5L13U86. . . . . . . . . . 19.99
PUMICE - Genuine 3F pumice powder produces
a soft satin finish. Use to rub out a stock before
finishing with rottenstone. Mix with linseed oil
to make a mild, fine abrasive. Use on fully dried
finishes only. a
b
SPECS: 3F grade. Plastic jar. 8 oz. (226 g) or 1 lb.
(.45 kg).
#083-057-008AK 8 oz. Pumice 8K07U99. . . . . . . . . . . . $ 11.99
#083-057-016AK 1 lb. Pumice 5L11U89 . . . . . . . . . . . . . 16.99
ART’S GUN STOCK FILLER
The Original Formula, Fills & Stains, Protects
A combination of the finest oils, ultra-fine stock
filler and the traditional Herter’s stains bring out
the warmth and hidden beauty of any gunstock.
Quickly fills the pores and seals the wood with
natural oils and preservatives. French Red - a
rich walnut color with just a hint of red; closely matches pre-'64
Winchesters and older Brownings. Walnut - a vivid, rich brown
enhances real walnut and darkens lighter hardwoods. Clear - no
stains included, intended to enrichen and enhance the grain on
birdseye maple, myrtle, or other fancy-grained, light-colored
woods.
SPECS: Oil base filler and stain. 16 fl. oz. (473 ml), 8 oz.fl. (237 ml).
#464-101-000AK French Red Filler, 16 oz,4F00XCH. $ 29.45
#464-101-008AK French Red Filler, 8 oz. 4F00ZAY. . . 16.99
#464-101-108AK Walnut Filler, 8 oz. 4F00PUA. . . . . . . 16.99
#464-101-808AK Clear Filler, 8 oz. 4F00BXC. . . . . . . . . 16.99
Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
FRENCH RED STAIN - French Red stain gives a rich, walnut color
with just a hint of red. Closely matches pre-’64 Winchesters and
older Brownings. Stain only, no fillers or sealers.
SPECS: Oil based stain. 8 oz. fl. (237ml)
#464-000-003AK French Red Stain, only 4F00UAV. . $ 15.99
order on the web
www.brownells.com
BOILED LINSEED OIL - Clear, linseed oil, double boiled
and double filtered to remove any impurities. Contains driers for 4-6 hr. curing. a
b
SPECS: 1 pint (473mL) or 1 quart (946mL).
#083-040-016AK Pint Linseed Oil, 5L17U91. . . . . . . . . . . . . . . . $ 24.99
#083-040-032AK Quart Linseed Oil 5L22U37. . . . . . . . . 31.99
BIRCHWOOD CASEY
TRU-OIL® STOCK FINISH
Gives The Deep, Rich “Hand-Rubbed” Look
Without The Hassle
Easy-to-use Tru-Oil brings out the warm,
natural beauty of a wood stock and gives it
the look of a deep, rich, hand-rubbed finish
without the hassle. It requires an average of
only three coats and dries so fast - 90 to 120
minutes per coat - that a stock can be finished in one day! TruOil is a purified triple-processed blend of all-natural oils that
penetrates into the grain to seal out moisture. Won’t yellow or
cloud the grain, and the surface becomes harder and tougher.
Apply multiple coats to produce a high-gloss finish, or for a more
subdued satin finish, cut back the gloss with fine steel wool or
rubbing compound, then apply Birchwood Casey Stock Sheen &
Conditioner (sold separately). Tru-Oil is perfect for refinishing
existing stocks; for an unfinished stock, first apply Birchwood
Casey Clear Sealer & Filler. Minor scuffs and marks on a stock
finished with Tru-Oil are easily fixed: just rub the spot gently
with a pad moistened with Tru-Oil. b
a
SPECS: Available in 3 fl. oz. (90 ml) and 8 fl. oz. (237 ml) bottles,
or 11 fl. oz. (325 ml) aerosol can. Dries in 90 to 120 minutes; cures
in 48 hours.
#167-009-220AK 3 oz. Tru-Oil 7F04U17 . . . . . . . . . . . . . $ 6.99
— 3 or More — 3 oz. Tru-Oil, per each 7F03U69. . . . . . 6.80
#167-009-800AK 8 oz. Tru-Oil 7F08U49 . . . . . . . . . . . . . 14.29
— 3 or More — 8 oz. Tru-Oil, per each 7F06U93. . . . . 12.80
#167-000-045AK 11 oz. Tru-Oil Aerosol, 7F07C99. . . . . 11.99
— 3 or More — 11 oz. Tru-Oil Aerosol, per each, 7F06C03 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.20
TRU-OIL STOCK FINISH KIT - Economical kit with everything you need to produce deluxe finish using the proven TruOil process.
SPECS: Kit contains: 3 oz. TruOil, 21⁄2 oz. Stock
Sheen & Conditioner, 21⁄2 oz. Walnut Stain, fine and
coarse sandpaper. 00 steel wool, Burlap cloth.
#167-121-000AK Tru-Oil Stock Finish Kit 7F13C49. $ 19.99
— 3 or More — Tru-Oil Kit, per each 7F09C54 . . . . . . . 17.70
Brownells/FAIRTRIMMER’S MILITARY oX STOCK OIL
Refinishes, Refurbishes, Protects & Beautifies
Wood Military Rifle Stocks
Deep-penetrating finishing oil is specially
formulated to protect wood military rifle stocks
from the elements, while bringing out the natural beauty of the grain in everything from USGI
walnut and birch to European hardwoods. a
b
SPECS: Available in ½ Pint (237mL) or 1 Pint (474mL) can.
#083-000-041AK Fairtrimmer’s Military oX, ½ Pint, 3H12A93. . . . . . . . . . . . . . . . . . . . . . . . . $ 15.99
#083-000-042AK Fairtrimmer’s Military oX, 1 Pint, 3H16A94. . . . . . . . . . . . . . . . . . . . . . . . . . . 19.99
BROWNELLS
. . . ONLY THE BEST . . . 443
PAGE STOCK FINISHING SUPPLIES
Highly concentrated, water soluble. Use individually or follow the instructions that come with each
bottle for mixing one or more base color to create
other colors. Powder scales required for mixing. a
b
SPECS: 2 oz. (57 g) bottles. Assortment has one bottle each of
Orange, Scarlet, Brown,Tartrazine, and Nigrozine. Some colors also
available separately, as listed below.
#083-023-000AK Water-Soluble Dye Assortment, 3H38A31. . . . . . . . . . . . . . . . . . . . . . . . . $ 47.99
#083-023-202AK Brown Water-Soluble Dye, 5L12A95. . . . . . . . . . . . . . . . . . . . . . . . . . 14.99
#083-023-402AK Scarlet Water-Soluble Dye, 5L09A99. . . . . . . . . . . . . . . . . . . . . . . . . . 12.99
#083-023-302AK Nigrosine Water-Soluble Dye, 5L13A02. . . . . . . . . . . . . . . . . . . . . . . . . . 14.99
Use alone or mix for an exact color match to
restore U.S. military stocks. Alcohol-based; penetrates and dries quickly . Formula VII - deep brown
with strong purple tones. Formula XII - medium
brown. Formula XIII - light brown with red tone.
Formula XIX - deep brown. Formula XX - gives
birch, maple, and soft woods, a uniform, dark, walnut color; enhances natural walnut, too. Kit contains one, 2 oz. bottle of each
formula except Formula XX. a
b
SPECS: Individual Bottles - 4 fl. oz. (120 ml) plastic bottle. Kit Includes (1) 2 fl. oz. (59 ml) bottle of each formula except Formula
XX. Includes instructions.
#500-104-001AK Formula VII, 4 oz. Bottle 5Z17P49. . $ 21.99
#500-104-002AK Formula XII, 4 oz. Bottle 5Z17P49. . . . 21.99
#500-104-003AK Formula XIII, 4 oz. Bottle 5Z17P39 . . . 21.39
#500-104-004AK Formula XIX, 4 oz. Bottle 5Z17P08. . . 20.99
#500-104-005AK Formula XX, 4 oz. Bottle 5Z16P99 . . . . 21.49
#500-104-000AK Military Stain Kit 5Z33P29 . . . . . . . . 38.99
OIL STOCK FINISHES
PURE TUNG OIL - 100% pure, natural tung oil without additives or driers, for beautiful, hand-rubbed,
in-the-wood finishes.
SPECS: 16 fl. oz. (473mL) or 32 fl. oz. (946mL).
#586-501-016AK Pint Tung Oil, 6H15A39. . . . . . . . . . . . . . $ 24.99
#586-501-032AK Quart Tung Oil 6H26A16 . . . . . . . . . . 42.99
STOCK WORK
SHELLAC
STICKS
STOCK FINISHING ACCESSORIES
ANTIQUE WOOD STAINS - Transparent dyes that
enhance woods’ natural grain without obscuring or
dulling. Deep penetrating. Won’t raise grain. a
b
SPECS: 4 fl. oz. (118 ml) net contents in metal can.
#519-200-104AK Antique Walnut Stain, 9A00XCH. . . . . . . . . . . . . . $ 13.99
#519-200-204AK Antique Maple Stain 9A00ZAY. . . . . 14.99
Brownells
PERMALYN
STOCK FINISH & SEALER
STOCK WORK
ACRA-COAT™ WOOD
Tough Epoxy Gives Added Stock Protection
Gives wood and plastic stocks a durable,
weather-proof finish. Not a one-shot wonder
finish, but one you apply in multiple, thin coats
until you reach the desired luster. Resists all but
the most aggressive bore solvents. Normal cure
time, one week, shortened by warming stock to
90° F. Replacement Nozzle - The easy solution
for clogged nozzles. Clean Out Nozzle - Use only
to clear a plugged pickup tube. a
b
SPECS: Aerosol. 12 oz. (340 g). Clear Matte or Gloss finish. Nozzles are correct size for Acra-Coat - Wood, sold in Paks of 12. Clean
Out Nozzle not intended for spraying.
#083-070-112AK Matte Acra-Coat Wood, 1F08X98. . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99
#083-070-012AK Gloss Acra-Coat Wood, 1F08X99. . . . . . . . . . . . . . . . . . . . . . . . . . 13.99
Cannot ship outside Continental U.S. Ship UPS or FedEx Ground only within U.S.
#084-179-002AK Replacement Nozzle B, 1F02U02. . . . . . . . . . . . . . . . . . . . . . . . . . $ 2.59
#084-179-004AK Clean Out Nozzle 1F02U61 . . . . . . . . . 3.29
CHEM-PAK
PRO-CUSTOM OIL GUNSTOCK FINISH
Tung Oil & Urethane Dries Quickly
To A Durable, Hard Coating
Penetrates wood to seal out moisture and
quickly fill the grain. Produces a hard, tough
finish that dries tack-free in as little as 2-3
hours; dries to full cure in 48 hours. Tung oilmodified urethanes resist scuffing, marring
and will not chip, crack or peel. Dries to a soft
gloss; can be polished to a high gloss or cut to
a satin finish. a
b
SPECS: 9 fl. oz. (267 ml).
#209-642-009AK Pro-Custom Oil Gunstock Finish, 9K10Z97. . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99
CHEM-PAK AEROSOL
Gun Sav’R CUSTOM OIL
GUNSTOCK FINISH
STOCK FINISHING SUPPLIES
Fast-Drying, Easy-To-Use, Run-Proof Aerosol
Our Tech Department gave this aerosol finish
five stars. A super-tough, professional-looking
stock finish applied in only hours without runs or
sags. Fills as it coats so you won’t spend extra time
cutting-back or sanding in. Dries to the touch in
only 45 minutes and can be recoated in as little
as six hours. Specially formulated, oil-modified
urethanes resist scuffs and scratches but provide
the look and feel of traditional, hand-rubbed oil
finishes, without all the hard work. Will not cloud or discolor
with age. Dries uniformly without the aggravating splotches so
common in many aerosol “furniture” finishes. Available in Satin
Gloss (Satin) or High Gloss (Gloss). a
b
SPECS: High gloss or satin gloss. 14 oz. (397 g) aerosol cans.
#209-101-014AK Satin Custom Finish, 9K12Z49. . . . . . . . . . . . . . . . . . . . . . . . . $ 16.49
#209-100-014AK Gloss Custom Finish, 9K10Z88. . . . . . . . . . . . . . . . . . . . . . . . . . 14.99
LIQUID GUN SAV’R GUNSTOCK FINISH – Apply with an airbrush or paint gun spray.
SPECS: 8 oz. liquid. High Gloss (Gloss) or Hunter Satin (Satin).
#209-000-001AK Gloss Liquid Finish, 9K09Z74. . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99
#209-000-002AK Satin Liquid Finish, 9K09Z74. . . . . . . . . . . . . . . . . . . . . . . . . . 12.99
B
ROWNELLS
444
PAGE Brownells “ORIGINAL”
LAUREL MOUNTAIN
STOCK RUBBING
COMPOUND
Tough, Waterproof; Favorite Of Pros
Developed by Rick Schrieber, used and recommended by John Bivins and Joe Balickie
in their stockmaking video (also Rifle #87 and
May ’84 Muzzle Blasts). Made with oil-modified polyurethanes that give the superior water resistance of
the plastics without the brittleness, temperature sensitivity and
later touch-up problems. Produce high-quality, “in-the-wood” or
“built-up” finishes to delight even the pickiest pro. Both contain the same basic resins and polymers. The Sealer penetrates
deeper into the wood, while the Finish does a better job of filling
pores in open-grained woods. a
b
SPECS: 4 fl. oz. (118 ml) or 1 qt. (32 fl. oz./946 ml) cans.
#519-300-004AK 4 oz. Stock Finish 9A12P36 . . . . . . . $ 12.99
#519-301-004AK 4 oz. Stock Sealer 9A09X99 . . . . . . . . . 11.99
#519-300-032AK 1 Qt. Stock Finish 9A00PUA . . . . . . . 34.99
#519-301-032AK 1 Qt. Stock Sealer 9A28X10. . . . . . . . 28.99
®
The Famous, Real, Kettle-Boiled Linseed Oil
Pure linseed oil, specially refined to dry in
just 2 to 3 hours to a tough, hard, easy-to-touchup finish. So simple to use, you can even leave
sanding dust to help fill pores. Apply stain (if
desired) and follow with finger-dunks of LinSpeed. Smooth out with the heel of your hand and set aside to
dry. First coat will “freeze” sanding whiskers for easy removal,
ending time consuming steaming and de-whiskering. Stop working so hard at your stock finishing! Sand it well, then APPLY
Lin-Speed and LET DRY!
#543-100-002AK 2 oz. Lin-Speed 3D07P45. . . . . . . . . . . $ 9.99
Produce Deluxe Finishes On Wood
Brownells
TRIPLE “F”™ COMPOUND
“Ultra-Fine” Stock Rubbing Compound
Almost twice as fine as our “Original”
Stock Rubbing Compound…so it removes
very little material. Greatly enhances the
look and feel of any stock finish by evening
out and brightening the existing finish. On a glossy finish, gives
a bright, jewel-like luster. For a satin finish, cut back Tru-Oil
or Lin-Speed with 600 grit paper, apply a small amount with a
soft cloth and rub until it achieves the look you want, then buff
off with a clean, soft cloth. Gives a magnificent depth and glow.
Can also use to remove fine scratches on stocks or furniture. a
b
SPECS: 2 fl. oz. (59 ml) or 10 fl. oz. (296 ml) net contents.
#083-028-302AK 2 oz. Triple “F” 5L04A40. . . . . . . . . . . $ 5.99
#083-028-310AK 10 oz. Triple “F” 5L08A28. . . . . . . . . . . 10.99
®
®
PILKINGTON
Brownells
CLASSIC GUNSTOCK FINISH
Clear Or Colored For “In-The-Wood”
Or “Built-Up” Finishes
Use Red-Brown Classic to match all those pre'64 guns that actually had the stain in the finish.
Gold & Brown warms walnut, gives light woods a
rich color. Tint Clear with Spirit Stains for any look
wanted, faster finishing. Fills pores easily, dries
hard. Works as an oil finish or build up like varnish. Each bottle
includes a 3,000 word, step-by-step instruction booklet.
SPECS: 2 fl. oz. (59 ml) net contents.
#703-350-602AK Gold & Brown Classic Finish, 3K00AYT. . . . . . . . . . . . . . . . . . . . . . . . . $ 24.25
#703-350-502AK Red-Brown Classic Finish, 3K00CHD. . . . . . . . . . . . . . . . . . . . . . . . . 24.25
#703-350-402AK Clear Classic Finish 3K00AVB . . . . . 23.50
PILKINGTON
LINSEED STOCK RUBBING OIL
Add That Linseed “Glow”
Gives any wood stock a soft, glowing luster. Great
after-season wipe down to maintain a healthy finish.
Red-Brown and Gold & Brown are especially good
on checkering, won’t plug the diamonds. Apply with
rottenstone to enhance the oil’s polishing action.
SPECS: 2 fl. oz. (59 ml) net contents.
#703-355-602AK Gold/Brown Linseed Oil 3K00ZAY.$ 25.99
#703-355-502AK Red-Brown Linseed Oil 3K00XCH. . 25.75
#703-355-402AK Clear Classic Linseed Oil, 3K00UAV . . . . . . . . . . . . . . . . . . . . . . . . . 23.00
Enhances The Natural Beauty Of Wood
Strongly recommended for new finishes
to rub and blend all those high “shine” and
“dull” flat spots into one superb masterquality finish. Great for rejuvenating an old
gunstock which has a good, original finish
underneath the grime and light scratches. The results of either
project can only be d
escribed as dramatic! Apply with Sheet Felt
Pads. a
b
SPECS: 4 fl. oz. (118 ml) or pint (16 fl. oz./473 ml) net contents.
#083-021-004AK 4 oz. Rubbing Compound, 5L08A85. . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99
#083-021-016AK Pt. Rubbing Compound 5L31A10. . . 42.99
LIN-SPEED GUNSTOCK OIL
R. GALE LOCK CO.
CARNAUBA GUN WAX
FIVE “F”™ COMPOUND
Even Finer Than Ultra-Fine
We really didn’t believe it when customer Don Newman said he’d found a
rubbing compound that would bring a
Triple “F”™ finish up to a “real” shine. We tried it; he’s right and
here it is. If you’re going for that “Shinier than a brass bed in a
sportin’ house” look, Five “F” will do it. We knocked a brand new
Remington finish back a bit, brought it up to just below original
with Triple “F” and then got out the Five “F”. The resulting gloss
and depth are unbelievable! Can be used to give luster to satin
finishes, too. To get “Hi-Shine”, start with “Original” and work
up thru Five “F”. Great for scratch removal on fine surfaces like
plexiglas or plastic lenses. a
b
SPECS: 2 fl. oz. (59 ml) or 10 fl. oz. (296 ml) net contents.
#083-028-502AK 2 oz. Five “F” 5L08A99. . . . . . . . . . . . $ 10.99
#083-028-510AK 10 oz. Five “F” 5L19A99. . . . . . . . . . . . 29.99
Cannot ship outside Continental U.S. Ship UPS or FedEx Ground only within U.S.
BLUE WONDER WOOD SHINE
Restores & Beautifies Wood Surfaces
Simple wipe on/wipe off formula penetrates deep
into wood to restore the original luster of your valuable
wood stocks, handgun grips, gun cases, or presentation cases. Blended formula with natural oils covers
minor scratches, returns moisture to dried out wood
and protects against damage from UV light. Doesn’t
leave behind a slippery residue. a
b
SPECS: 4 fl. oz. (118 ml) squeeze bottle.
#100-005-002AK Wood Shine 6C04Y68. . . . . . . . . . . . . . $ 5.99
SINCE 1939
Protects and beautifies with natural
carnauba, and nothing that can dull or
cloud gun finishes. Soft Paste rubs on
easily, buff with soft cloth. Liquid covers hard-to-get-to areas.
SPECS: Paste - 2 oz. (57 g) wt. in resealable tin. Liquid - 2 fl. oz.
(59 ml) wt. in plastic bottle.
#346-036-002AK Paste Gun Wax, 6D00YTP . . . . . . . . . . . . . . . . . . . . . . . . $ 23.85
#346-037-002AK Liquid Gun Wax, 6D00AVB . . . . . . . . . . . . . . . . . . . . . . . . . 23.85
RENAISSANCE WAX & CLEANER
Outstanding Quality, Used On Priceless
Heirlooms In Museums Worldwide
MICRO-CRYSTALLINE WAX, CLEANER, POLISH - Imparts a
beautiful, glowing luster and moisture resistance to wood, leather, marble, ivory, natural
stone and metal; resists fingerprints, dust and
wear. Helps prevent oxidation, removes oil
and grime; leaves the treated surface with a
translucent, warm glow. Restores cloudy stock
finishes. Acid-free, dries clear, won’t discolor or
yellow.
SPECS: Paste wax, white color. 2.3 oz. (57 g).
#053-050-200AK Renaissance Wax, 9K20V29. . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99
PRE-LIM SURFACE CLEANER - Restores metal
surfaces without scratching. Paste mix of Neuburg silica chalks, petroleum distillates, and
water burnishes away stubborn powder burns
and brass deposits from revolver frames and
bolt faces. Lifts away surface rust safely and
effectively from blued and stainless surfaces,
returning the factory shine, and leaving them
silky-smooth.
SPECS: Paste cleaner, tan color. 7 fl. oz. (200 ml).
#053-000-001AK Pre-Lim Surface Cleaner, 9K00DZA . . . . . . . . . . . . . . . . . . . . . . . . $ 25.95
TAPASTRING
GUITAR POLISH RED & BLUE
Optical Grade Polishes
Remove Scratches & Enhance
The Luster Of Fine Wood Finishes
Our Gun Techs discovered these
amazing wood polishes during a visit
to the renowned gunsmithing school
in Trinidad Colorado, and have been
using them ever since! Formulated
by one of the instructors for use on high-quality guitars, they’ve
become the polish of choice for countless factory and custom gunstocks for equally superior results. The secret of these formulas
is in the superior grade of polishing media selected for the mix
– the same used to polish the windows on U.S. spacecraft. The
3 micron Red formula is ideal for polishing out scratches and
imperfections on old or newly refinished gunstocks and should
be used with light pressure to prevent over-polishing of delicate
surface finishes. Blue formula uses ultra-fine, 1 micron polishing media to refine the luster after use of Polish Red or to blend
imperfections in extremely delicate finishes. Biodegradable and
environmentally friendly with no smeary waxes, silicones, or
damaging chemicals. b
a
SPECS: 2 oz. (.059 l) jar. Includes (1) one 2¾" (6.9cm) long x 1¾"
(4.5cm) wide x ½" (1.3cm) thick felt polishing pad and instructions
included.
#100-003-107AK 3 Micron Red Polish, 4B08Y95. . . . . . . . . . . . . . . . . . . . . . . . . $ 12.97
#100-003-108AK 1 Micron Blue Polish, 4B08Y95. . . . . . . . . . . . . . . . . . . . . . . . . . 12.97

Orders/Tech: 800-741-0015

Transcription

Similar documents

perceived recoil is subjective

Girls talk about menstrual hygiene in Malawi

SCI-Central Washington Chapter Rifle Raffle

here to the GAMO G-Magnum 1250 Air Rifle flyer

PadPak Jr.

The wardrobe malfunction — it`s a Hollywood moment that

Brighton S-Box - Step 7-8

Electronic Drum-Set Buying Guide

Clinic Highlights Prerequisites Field Shooting Clinic Activities

Spring, 2016