Eladó használt gépek_1302E - Plastic Product Hungary Kft.

Used plastic processing machines, second hand injection moulds, used injection mould machines,
water coolers, compressors, material dryers, material feeders, colour dosigns, hot runnel
controls, tempering units, robots, grinders, conveyors, machine parts and any more…..
– Plastic Product Hungary Kft. – Budafoki út 64., 1117 Budapest, Hungary
A few samples of sale machines:
Ferromatik Milacron K110 D-S
injection moulding machine
Arburg 270D 500-210
injection moulding machine
Tria 32-20 grinder
Engel ES 330/80 CC90
injection moulding machine
Ferromatik Milacron FM250
injection moulding machine
KT Handling grinder
Battenfeld 460/170 Unilog 4000
injection moulding machine
Klöckner Ferromatik Desma
FM160 injection machine
Rapid grinder
Krauss Maffei 250-1200 B
injection moulding machine
Arburg 320M 850-210
injection moulding machine
Moretto 30-24 grinder
Battenfeld 650/170 Unilog 1000
injection moulding machine
Krauss Maffei KM 90-340 B2
injection moulding machine
Palbase 22-30 grinders
SB SRS202 grinder
HB-Therm tempering unit
BFA sprue picker robot
Boe Therm tempering unit
Regloplas 90S tempering units
Mould crane
DYN tempering unit
Remak tempering unit
MOTAN Duomix mixing valves
Klöckner tempering unit
Wittmann tempering unit
Mould fixing plate
Single STW150
tempering unit
Yudo hot runnel controller
Mobile hot air material dryer
AEC tempering units
Joki conveyor
Hopper dryer
Actual offer (Febr. 2013.):
Renewed Krauss Maffei KM 250-1200 B3 injection moulding machine.
Increased capacity with two pump and hydraulic accumulator. The hydraulic and electric systems
are renewed, pumps, filters, display, many valves and sealings are new. Clamping force 250t,
distance tie bar 630x560mm, distance plates max. 1150mm, opening max. 830mm, screw 60mm,
injection volume 678cm3 (610gr/PS), electric motor capacity 55kW, control MC3, built year 1990
Extras: 2x core pull, 2x air ejector, 2x mould temper control, 8x hot runnel control, 12x water
distributor. Ideal machine to quick production for thin wall product. Price (netto): 16.900 EUR
Used Krauss Maffei KM 150-620 B injection moulding machine in good condition.
Increased plastification capacity, exact and reliable machine. Clamping force 150t, distance tie bar
500x450mm, screw 50mm, injection volume 378cm3, electric motor capacity 30kW, control MC3,
built year 1990. Extras: 1x core pull, 2 x air ejector, 8x hot runnel control. Price(netto): 9.900 EUR
Arburg 420M 800-225 used injection moulding machine in top condition. The machine is in
beautiful aesthetic and technical condition! Clamping force 60t, distance tie bar 420x420mm,
distance plates max. 750mm, screw 30mm, injection volume 106cm3 (90g/PS), electric motor
capacity 15kW, control Multronica, built year 1996. 1x core pull. Price (netto): 9.900 EUR
Used Arburg 270M 500-90 U (universal) horizontal or vertical injection moulding machine.
Clamping force 50t, distance tie bar 270x270mm, distance plates max. 550mm, screw 25mm,
injection volume 49cm3 (40g/PS), electric motor 15kW, built year 1990. Price(netto): 4.900 EUR
Heighten plate for low-built mould to 250-500t machine, sizes 125x800x850mm with M20
worms, distance hole 175mm in the centre. Weight approx. 800 kg. Price (netto): 1.700 EUR
Used injection moulds to plastic slippers production in 4 types and limitless colours. The
collection feasible fit to expand. Plastic slippers sizes 23 to 45 (European sizes). 43 pcs. moulds
and accessories: painting and fixing machines and know-how. Price (netto): 19.000 EUR
Used Remak RX-50 linear robot to 150-400t machine. Movements: x-axis: 500 mm,
y-axis: 1000 mm, z-axis: 2000 mm, C-axis + -90°, product weight: max. 6 kg,
connection: Euromap, control: B&R Compact, built year: 1998. Price (netto): 3.900 EUR
Sprue picker robot without control. All movement with pneumatic system.Price (netto): 900 EUR
Screw and barrel to Krauss Maffei.../1200 B
injection moulding machine. Diameter 60mm.
Price (netto): 2.200 EUR
Used injection moulds (3 sets of different
sizes) to openable plastic box production.
The bottom and top are together with
film-hinge. Suitable to VHS cassette, screwdriver set, hand tools set, sealing set, screw
set, writing units, sewing-box, play card,
angler set, cosmetic set, promotion units, food
products packing. Price(netto): 2.900 EUR/pc.
Used Labotek hopper hot air dryer to
plastic machine with high capacity and flow
past system. Volume 35l, heating capacity 6
kW. Price (netto): 800 EUR
Used Rozmaring type grinder, power 3 kW
2 pcs. fixed knife, 2 pcs. turning knife for
smaller parts and sprue.
Price(netto): 600 EUR
Used injection moulds to angular electric
installation box (100x100mm) production.
2 pcs. moulds, the bottom mould have 1
cavity, the top mould have 2 cavities.
Price (netto): 3.200 EUR / 2 moulds
Used injection moulds to rounded electric
installation box (dia. 80 mm) production.
2 pcs. moulds, the bottom mould have 2
cavities, the top mould have 2 cavities too.
Price (netto): 3.800 EUR / 2 moulds
Used injection mould to champagne plug
production. The mould have 6 cavities with
hot runnel. Price (netto): 3.900 EUR
Tool lifting hoist Arburg type with Stahl
electric winch. Capacity 400 kg
Price (netto): 1100 EUR
Used temper units HB-Therm, type MW-90
Built year 1998- 2000, medium water till 95 C,
heating capacity 6,6kW.Price (netto): 530EUR
Used injection moulds (2 pcs.) to CD box
production. The moulds have 2-2 cavities.
Price (netto): 4.700 EUR / 2 moulds
Used temper units GWK, type TW-33
Built year 1997, medium water till 140 C,
heating capacity 3kW. Price (netto): 450EUR
Used injection moulds to DVD case
production. The mould have 1 cavity with hot
runnel. Price (netto): 3.200 EUR
Used Colortech colouring gravimetric
feeder for masterbatch, sliding, foaming or
other granular additive to raw material. Digital
control with alarm. Price (netto): 850 EUR
Used injection mould to tennis ball holder
production. The mould have 1 + 1 cavity. The
product is from two parts, it is collapsible or
fixing on short or skirt.
Price (netto): 1.000 EUR
Used injection moulds (2 pcs.) to play card
box production. 2 pcs. moulds with hot
runnel. The bottom and top moulds have 1-1
cavity. Price (netto): 2.700 EUR / 2 moulds
Used injection mould to pipe-end
production. Its are usable to injection moulds
and any more where need the anti-corrosion
parts. The mould have 2 cavities with
changeable inserts to 4 types worm: M10,
10x1,5, M12, 12x1,5 Price(netto): 1.200 EUR
Used injection mould to top for bottle
production. Diameter 120mm with three
section twine-worm. The mould have 1 cavity
Price (netto): 800 EUR
Used injection mould to plastic hook
production. Its are usable for different
product in markets. The mould have 4
cavities. Price (netto): 800 EUR
Used Mischboy colouring gravimetric
feeder for masterbatch, sliding, foaming or
other granular additive to raw material.
Price (netto): 400 EUR
Used injection mould to promotion parts
production. The product may stick on maps,
calendar, notebook and any more. The mould
have 4 cavities and changeable inserts for
different figure. Price (netto): 800 EUR
Used injection moulds to marking on car
production. The parts are from ABS material
with galvanised surface. Self-adhesive is on
the backside. The mouds have 2-2 cavities.
Price (netto): 700 EUR /pc.
Used injection mould to plastic token
production. Its are usable for play or
promotion. The mould have 4 cavities and
changeable inserts for different figure in the
centre. Price (netto): 800 EUR
Used injection mould to small rounded
plastic case (diameter 40mm) production.
The case make from 2 parts and its are fit
together. The bottom and top may turn round
therefore the holes are variable. The case
usable to perfume for car and garderobe or
insecticide and any more. The mould have
1 + 1 cavity. Price (netto): 800 EUR
Used cooling aggregate for industrial
water cooler, type VEB H2-80/17-107/6.
Cooling capacity 60kW, electric motor
capacity 17kW.
Price (netto): 900 EUR
Screw and barrels to plastic injection machines:
Screw and barrel univerzal type
with heating elements. Dia. 85mm,
length 1450mm.Price(netto):1.600
Screw and barrel to PVC material
with heating elements. Dia. 50mm,
length 1450mm.Price(netto):1.400
New screw and barrel to silicon
injection. Dia. 35mm, length
970mm. Price (netto): 2.900 EUR
Used components, control cards, display, hydraulik pump, hydraulic motor, valves, block
Battenfeld Unilog 4000 TFU 400
card. Price (netto): 300 EUR
Battenfeld Unilog 4000 CC10
card. Price (netto): 250 EUR
Krauss Maffei MC3 PR 201
card. Price (netto): 500 EUR
Battenfeld Unilog 4000 CPST 203
card. Price (netto): 900 EUR
Krauss Maffei MC3 EK 200
card. Price (netto): 500 EUR
Krauss Maffei MC3 PR 202
card. Price (netto): 500 EUR
Battenfeld Unilog 4000 CPEA 200
card. Price (netto): 300 EUR
Krauss Maffei MC3 KR 103
card. Price (netto): 500 EUR
Krauss Maffei MC3 PV 200
card. Price (netto): 500 EUR
Battenfeld Unilog 4000 ELIF 400
card. Price (netto): 250 EUR
Krauss Maffei MC3 LV 200
card. Price (netto): 700 EUR
Krauss Maffei MC3 EPR10
card. Price (netto): 250 EUR
Krauss Maffei MC3 EPR11
card. Price (netto): 200 EUR
Krauss Maffei MC3 FD100
card. Price (netto): 350 EUR
Bosch 0 811 403 001 proportional
hydraulic valve.
Price (nettó): 300 EUR
Krauss Maffei MC3 VU100
card. Price (netto): 200 EUR
Krauss Maffei MC3 MC301
card. Price (netto): 400 EUR
Bosch 0 810 090 215 hydraulic
valve. Price (nettó): 100 EUR
Krauss Maffei MC3 KMV2
card. Price (netto): 250 EUR
Krauss Maffei MC3 keyboard
Price (netto): 300 EUR
Bosch 0 811 104 113 hydraulic
safety valve.Price (nettó): 200 EUR
Krauss Maffei MC3 CPU100
card. Price (netto): 250 EUR
Krauss Maffei MC3 control table.
Price (netto): 400 EUR
Bosch 0 811 404 035 proportional
valve Price (nettó): 300 EUR
Krauss Maffei MC3 GDC
card. Price (netto): 300 EUR
Krauss Maffei MC3 display to
parts. Price (netto): 100 EUR
Bosch 0 810 060 058 directional
valve Price (nettó): 300 EUR
Krauss Maffei MC3 EPR20
card. Price (netto): 250 EUR
Engel 14” display to parts
Price (netto): 100 EUR
Pall filter house
Price (nettó): 200 EUR
More used plastic processing machines, second hand injection moulds, used injection mould
machines, water coolers, compressors, material dryers, material feeders, colour dosigns, hot
runnel controls, tempering units, robots, grinders, conveyors, machine parts for sale.
WE BUY SECOND HAND ARBURG, BATTENFELD, DEMAG, ENGEL, KLÖCKNER
FERROMATIK DESMA, FERROMATIK MILACRON, KRAUSS MAFFEI INJECTION
MOULDING MACHINES, INDUSTRIAL COOLERS, MATERIAL DRYERS, HOT
RUNNEL CONTROLLERS, TEMPERING UNITS, GRINDERS!
Contact:
Plastic Product Hungary Kft.
Head quarters: Jokai Mor u. 7/b., 1183 Budapest, Hungary
Company seat: Budafoki ut 64., 1117 Budapest, Hungary
Tel.: +36 1 4645 831
Fax: +36 1 4645 830
e-mail: [email protected]
webpage: www.plastic2.hu
Managing director: Mr. Tamas Szily
Mobile: +36 20 9344 100
Other data:
Company registration: Fovarosi Cegbirosag 01-09-704267
VAT: HU12804588
VPID szám: HU0000513634