Table of Contents
Planting Products................................................2-41
Harvesting Products........................................ 42-71
Other Products.................................................. 72-79
S.I. Distributing Show Schedule.......................... 80
Acra-Plant Blu-Jet Parts.................................................. 40
Acra-Plant Conservation Ripper Points.................... 41
Acra-Plant Fertilizer Knives........................................... 40
Acra-Plant Notched Disc Openers.............................. 39
Acra-Plant Quick Change Fertilizer Knives.............. 41
Acra-Plant V-Slice Inserts............................................... 38
Acre Plus Seed Box Topper............................................ 26
Air Design Drill Scrapers................................................ 26
Air Design Planter Scrapers.......................................... 26
Boule Cristal Strobe Light.............................................. 72
Bullseye Seed Tube.......................................................... 12
Burvee Bubble-Up Auger.............................................. 48
Burvee Hopper Topper................................................... 49
Calmar Auger Spout........................................................ 50
Cast-Iron Closing Wheels............................................... 25
CleanSweep........................................................................ 14
Close-N-Till Cast Wheels................................................. 25
Closing Wheel Brackets.................................................. 24
Depth-A-Matic................................................................... 21
Down Pressure Spring Package.................................. 28
Ergo Hitch........................................................................... 76
Finger-Till Cast Wheels.................................................... 25
Gauge Wheel Cover......................................................... 27
HCC Flip Reel Kit............................................................... 50
HCC Gateway Sieves & Chaffers.................................. 45
HCC Orbit Trac II Reel Kit................................................ 46
HCC Paddle Tines.............................................................. 43
HCC Complete Orbit Trac II Reel.................................. 47
HCC OEM Replacement Reel Tines............................. 44
Insecticide Skirt................................................................. 30
John Deere OEM Replacement Guards.................... 71
John Deere OEM Replacement Cutting Parts.. 70
John Deere Seed Boots.................................................. 36
John Deere Stabilizer Kit................................................ 71
Keeton Seed Firmers.................................................33-35
Kinze Brush Meter Adapter........................................... 22
Leatherman Tools............................................................. 73
Lockease Hitch Pin........................................................... 76
Bold Type indicates New Products for 2013
M3 Monitor System......................................................... 29
Martin Planting Attachments................................15-20
Mojo Wire............................................................................ 37
Montezuma Toolboxes.............................................77-79
Mur-Lok Fittings................................................................ 37
Needham Ag V8 Firming Wheel.................................. 32
NH3 Disc Sealer.................................................. 32
One Wrench........................................................................ 22
Parallel Linkage Rebuild Kits........................................ 28
Planter Pivot Arm Kits..................................................... 23
Planter Replacement Parts............................................ 10
Plastic Wear Blocks........................................................... 42
Postboxx Mailbox............................................................. 73
Precision Meter....................................................................8
Precision Meter Parts.........................................................9
Quick Crank Trash Whipper Adjuster......................... 21
Quick Finger....................................................................... 42
Radura Disc Mower Blades............................................ 51
SCH Cutting System........................................................ 52
SCH EasyCut II Kits......................................................54-60
SCH EasyCut II Parts...................................................61-63
SCH EasyCut II Knifeheads.......................................64-66
SCH Pro-Drive Kits............................................................ 69
SCH Pro-Drive Knife Drive.......................................67-68
SCH Roller System............................................................ 53
Schuck Cushion Hitches...........................................74-75
Seed Level Indicator........................................................ 22
Shield Ag Drill Discs......................................................... 31
S.I. Belt Meter....................................................................2-3
S.I. Belt Meter Kits............................................................3-7
S.I. Belt Meter Parts.............................................................7
S.I. Distributing Show Schedule.................................. 80
Smart Till Replacement Parts............................ 72
Spring Compression Spacers....................................... 36
Sure Mark Marker Weights............................................ 27
Sure Stop............................................................ 44
Tractor Safety Lights........................................................ 73
Trail-Jet Fertilizer Opener.............................................. 30
Trash Guard........................................................................ 27
V-Closing Wheel Bracket for Case IH
and White Planters........................................................... 23
VenHuizen AccuVac Kit.................................................. 11
WaveVision Seed Tube.................................................... 13
www.sidist.com
VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING
1
S.i. Belt Meter
The First Significant Technology Change In Grain Drill Meters In Decades
Features:
• The S.I. Belt Meter allows the operator to seed with one
setting at a determined rate of flow for most seed sizes
• A regular even rate of seed flowing from the meter at all times
• Seed damage at the meter is greatly reduced or eliminated
• There is a positive setting by adjusting meter speed
• The flow rate remains constant up to 10 mph
• Plants soybeans, wheat and oats
Benefits:
• You save money due to no over seeding
• You make money due to no under seeding
• Any variation in seeding rate is eliminated
Information:
Now you can plant the seed population per acre you
choose without guessing. Accurate population control is
possible even on large seed crops such as soybeans. The S.I.
Belt Meter, when mounted on a grain drill, will singulate the
seed and maintain accurate population control over a wide
range of seed sizes (2,000 to 4,000 actual seeds per pound).
The S.I. Belt Meter will plant a known number of seeds for every revolution of the drill shaft.
Population rate changes are simply made by using a planter-type rate transmission (chart and
sprockets provided) that changes the ratio between the ground drive wheel and the drill drive
shaft. Changes in seed size do not affect the planting rate as most fluted type grain drill meters
do.
John Deere Transmission
Seed flow is greatly improved over all other current designs of grain drill meters. A constant
stream of seed flows out the S.I. Belt Meter at any operating speed. Accordingly, a more even
flow of seed creates the opportunity for more even spacing in the seed trench.
The S.I. Belt Meter is designed to primarily plant the following crops: Soybeans at 2,000 to 4,000
actual seeds per pound, wheat and oats. The S.I. Belt Meter is not designed (and does not work
well) on crops planted at low rate or of a non-symmetrical shape such as milo/sorghum, corn,
sunflower, cotton and edible beans.
Great Plains Transmission
Any guess work in setting rate is eliminated. For most seed sizes, the meter will plant your seed
at the rate you establish.
The conversion pays for itself through seed savings and virtually eliminating seed damage.
The S.I. Belt Meter adapts to most John Deere, Great Plains and Case-IH grain drills.
Case-IH Transmission
2
800.368.7773
CALL TOLL-FREE TO ORDER TODAY.
William Romans, the inventor of the S.I. Belt Meter, was awarded the
2005 Iowa Inventor of the Year for his innovative contributions for seed
and chemical metering devices. Mr. Romans recognized the problem of
measuring seed sowed by grain drills and developed the S.I. Belt Meter
to replace the conventional fluted feed wheel. With ever increasing
seed costs there is more of a necessity to only plant the population
you desire and no more. In addition, the S.I. Belt Meter delivers the
same number of seeds with each revolution so re-calibrating is not
necessary when changing to a different seed size or variety.
S.I. Belt Meter
Disclaimer
Mention of any specific trade names
within this publication does not
represent a product
endorsement on the part of Purdue
University or any of its employees.
Measured row-to-row variation in seeding rate produced by a grain drill equipped
with a standard fluted-wheel feed system. Due to the row-to-row variation
produced by a fluted-feed grain drill, Purdue researchers examined an
alternative metering approach. A belt-type metering system that could be fitted
to a conventional grain drill was shown to reduce row-to-row variation in grain
drill seed delivery during calibration. (Individual belt units replaced each
fluted-feed mechanism on a grain drill.) Field plots confirmed that the belt-type
metering system produces a significant (37 percent) reduction in plant stand
variation.
Authors
Stephen E. Hawkins, assistant
director, Purdue Ag Centers,
Agricultural Research Programs,
Purdue University
Daniel R. Ess, associate professor,
Department of Agricultural and
Biological Engineering, Purdue
University
Measured row-to-row variation in seeding rate produced by a grain drill
equipped with a belt metering system.
S.I. Belt Meter Kits
All kits include:
• S.I. Belt Meter for each opener
• Transmission conversion kit(s)
• New seed charts
• Installation instructions
• Extra belt meter, cutoff brush,
cotter pin
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
Illustration of
the differences in
construction between
conventional flutedwheel and belt-type
metering systems.
Call For Pricing And Availability Of Makes And Models Not Listed.
Important: The S.I. Belt Meter is not designed nor will it work properly when planting soybeans
that are larger than 2,000 actual seeds per pound. Soybeans must be properly graded so as to
not contain soybeans that are larger than 2,000 actual seeds per pound.
Larger beans such as tofu and edible beans generally will not work with the S.I. Belt Meter
because of the size of the bean.
www.sidist.com
3
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
John Deere Belt Meter Kits
Product ID
Description
Make
Model
Lift Kit
Price
BMK12560455
BELT METER KIT-JD455 25’ 6”
John Deere
455
Width Spacing Meters Drives
25’
6”
49
2
0
$4,696.00
BMK12575455
BELT METER KIT-JD455 25’ 7.5”
John Deere
455
25’
7.5”
40
2
0
$4,029.00
BMK12510455
John Deere
455
25’
10”
30
2
0
$3,292.00
BMK12515455
John Deere
455
25’
15”
20
2
0
$2,555.00
BMK13060455
John Deere
455
30’
6”
60
3
0
$6,044.00
BMK13075455
John Deere
455
30’
7.5”
48
3
0
$5,160.00
BMK13010455
John Deere
455
30’
10”
36
3
0
$4,275.00
BMK13015455
John Deere
455
30’
15”
24
3
0
$3,391.00
BMK13575455
John Deere
455
35’
7.5”
56
3
0
$5,749.00
BMK13510455
John Deere
455
35’
10”
42
3
0
$4,717.00
BMK11075750
John Deere
750
10’
7.5”
16
1
0
$1,720.00
BMK11010750
John Deere
750
10’
10”
12
1
0
$1,425.00
BMK11015750
John Deere
750
10’
15”
8
1
0
$1,130.00
BMK11575750
John Deere
750
15’
7.5”
24
1
0
$2,310.00
BMK11510750
John Deere
750
15’
10”
18
1
0
$1,867.00
BMK11515750
John Deere
750
15’
15”
12
1
0
$1,425.00
BMK12075750
John Deere
750
20’
7.5”
32
2
0
$3,440.00
BMK12010750
John Deere
750
20’
10”
24
2
0
$2,850.00
BMK12015750
John Deere
750
20’
15”
16
2
0
$2,260.00
BMK13075750
John Deere
750
30’
7.5”
48
2
0
$4,619.00
BMK13010750
John Deere
750
30’
10”
36
2
0
$3,735.00
BMK13015750
John Deere
750
30’
15”
24
2
0
$2,850.00
BMK115751520
John Deere
1520
15’
7.5”
24
1
0
$2,310.00
BMK120751520
John Deere
1520
20’
7.5”
32
2
0
$3,440.00
BMK120101520
John Deere
1520
20’
10”
24
2
0
$2,850.00
BMK115151530
John Deere
1530
15’
15”
12
1
0
$1,425.00
BMK120151530
John Deere
1530
20’
15”
16
1
0
$1,720.00
BMK110751560
John Deere
1560
10’
7.5”
16
1
0
$1,720.00
BMK110151560
John Deere
1560
10’
15”
8
1
0
$1,130.00
BMK115751560
John Deere
1560
15’
7.5”
24
1
0
$2,310.00
BMK115101560
John Deere
1560
15’
10”
18
1
0
$1,867.00
BMK115151560
John Deere
1560
15’
15”
12
1
0
$1,425.00
BMK120751560
John Deere
1560
20’
7.5”
32
2
0
$3,440.00
BMK120101560
John Deere
1560
20’
10”
24
2
0
$2,850.00
BMK120151560
John Deere
1560
20’
15”
16
2
0
$2,260.00
BMK130751560
John Deere
1560
30’
7.5”
48
2
0
$4,619.00
BMK130101560
John Deere
1560
30’
10”
36
2
0
$3,735.00
BMK130151560
John Deere
1560
30’
15”
24
2
0
$2,850.00
BMK110751590
John Deere
1590
10’
7.5”
16
1
0
$1,720.00
BMK110151590
John Deere
1590
10’
15”
8
1
0
$1,130.00
BMK115751590
John Deere
1590
15’
7.5”
24
1
0
$2,310.00
BMK115101590
John Deere
1590
15’
10”
18
1
0
$1,867.00
BMK115151590
John Deere
1590
15’
15”
12
1
0
$1,425.00
BMK120751590
John Deere
1590
20’
7.5”
32
2
0
$3,440.00
BMK120101590
John Deere
1590
20’
10”
24
2
0
$2,850.00
BMK120151590
John Deere
1590
20’
15”
16
2
0
$2,260.00
BMK130751590
John Deere
1590
30’
7.5”
48
2
0
$4,619.00
4
800.368.7773
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
John Deere Belt Meter Kits - Continued
Product ID
Description
Make
Model
Lift Kit
Price
BMK130101590
John Deere
1590
30’
10”
36
2
0
$3,735.00
BMK130151590
John Deere
1590
30’
15”
24
2
0
$2,850.00
• On early models of John Deere 750 drills (serial number-10550) the seed tubes will not fit onto the S.I. Belt Meter. Updating to the new style seed tubes or
modification is necessary.
• John Deere drills with fertilizer cannot be fitted with the S.I. Belt Meter. The S.I. Belt Meter transmission driveline is not compatible with the fertilizer driveline.
• John Deere drills with a seed agitator in the seed box can be fitted, but the agitator cannot be used.
Great Plains Belt Meter Kits*
Product ID
Description
BMK212601200
BELT METER KIT-GP1200 12’ 6”
Make
Model
Great Plains
1200
12’
6”
24
1
Lift Kit
Price
0
$2,310.00
BMK212701200
Great Plains
1200
12’
7”
20
1
0
$2,015.00
BMK212751200
BELT METER KIT-GP1200 12’ 7.5”
Great Plains
1200
12’
7.5”
19
1
0
$1,944.00
$1,867.00
BMK212801200
Great Plains
1200
12’
8”
18
1
0
BMK212101200
Great Plains
1200
12’
10”
14
1
0
$1,572.00
BMK212701205
Great Plains
1205
12’
7”
20
1
0
$2,015.00
BMK212701210
Great Plains
1210
12’
7”
20
1
1
$2,179.00
BMK212751210
Great Plains
1210
12’
7.5”
19
1
1
$2,108.00
$2,031.00
BMK212801210
Great Plains
1210
12’
8”
18
1
1
BMK212101210
Great Plains
1210
12’
10”
14
1
1
$1,736.00
BMK215601500
Great Plains
1500
15’
6”
30
1
0
$2,752.00
BMK215701500
Great Plains
1500
15’
7”
26
1
0
$2,457.00
BMK215751500
Great Plains
1500
15’
7.5”
24
1
0
$2,310.00
BMK215801500
Great Plains
1500
15’
8”
22
1
0
$2,162.00
BMK215101500
Great Plains
1500
15’
10”
18
1
0
$1,867.00
BMK215161500
Great Plains
1500
15’
16”
12
1
0
$1,425.00
BMK215151500
Great Plains
1500
15’
15”
12
1
0
$1,425.00
BMK215701510
Great Plains
1510
15’
7”
26
1
1
$2,621.00
BMK215751510
Great Plains
1510
15’
7.5”
24
1
1
$2,473.00
BMK215801510
Great Plains
1510
15’
8”
22
1
1
$2,326.00
BMK215101510
Great Plains
1510
15’
10”
18
1
1
$2,031.00
BMK220602000
Great Plains
2000
20’
6”
40
2
0
$4,029.00
BMK220702000
Great Plains
2000
20’
7”
34
2
0
$3,587.00
BMK220752000
Great Plains
2000
20’
7.5”
32
2
0
$3,440.00
BMK220802000
Great Plains
2000
20’
8”
30
2
0
$3,292.00
BMK220102000
Great Plains
2000
20’
10”
24
2
0
$2,850.00
BMK220142000
Great Plains
2000
20’
14”
17
2
0
$2,337.00
BMK220152000
Great Plains
2000
20’
15”
16
2
0
$2,260.00
BMK220702010
Great Plains
2010
20’
7”
34
2
1
$3,751.00
BMK220752010
Great Plains
2010
20’
7.5”
32
2
1
$3,604.00
BMK220802010
Great Plains
2010
20’
8”
30
2
1
$3,456.00
BMK220102010
Great Plains
2010
20’
10”
24
2
1
$3,014.00
BMK220152015
Great Plains
2015
20’
15”
16
2
0
$2,260.00
BMK224602400
Great Plains
2400
24’
6”
48
2
0
$4,619.00
BMK224702400
Great Plains
2400
24’
7”
40
2
0
$4,029.00
BMK224752400
Great Plains
2400
24’
7.5
38
2
0
$3,882.00
BMK224802400
Great Plains
2400
24’
8”
36
2
0
$3,735.00
BMK224102400
Great Plains
2400
24’
10”
28
2
0
$3,145.00
BMK224152400
Great Plains
2400
24’
15”
19
2
0
$2,484.00
BMK224752410
Great Plains
2410
24’
7.5”
38
2
1
$4,046.00
BMK224802410
Great Plains
2410
24’
8”
36
2
1
$3,898.00
Note: For Great Plains, need model number, serial number and if the drill has parallel linkage or markers.
www.sidist.com
5
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
Great Plains Belt Meter Kits - Continued
Product ID
Description
Make
Model
BMK224102410
BMK224152410
BMK230753010
Lift Kit
Price
Great Plains
2410
24’
10”
28
Great Plains
2410
24’
15”
19
2
1
$3,309.00
2
1
Great Plains
3010
30’
7.5”
$2,648.00
48
2
1
$4,783.00
BMK230803010
Great Plains
3010
30’
8”
44
2
1
$4,488.00
BMK230103010
Great Plains
3010
30’
10”
36
2
1
$3,898.00
BMK224752SF24
BELT METER KIT-GP2SF24 24’ 7.5”
Great Plains
2SF24
24’
7.5”
38
2
0
$3,882.00
BMK212603PD12
BELT METER KIT-GP3PD12 12’ 6”
Great Plains
3PD12
12’
6”
24
1
0
$2,310.00
BMK212703PD12
Great Plains
3PD12
12’
7”
20
1
0
$2,015.00
BMK212753PD12
BELT METER KIT-GP3PD12 12’ 7.5”
Great Plains
3PD12
12’
7.5”
19
1
0
$1,944.00
BMK212803PD12
Great Plains
3PD12
12’
8”
18
1
0
$1,867.00
BMK212103PD12
Great Plains
3PD12
12’
10”
14
1
0
$1,572.00
BMK214083PD14
Great Plains
3PD14
14’
8”
20
1
0
$2,015.00
BMK215603PD15
Great Plains
3PD15
15’
6”
30
1
0
$2,752.00
BMK215703PD15-1
BELT METER KIT-GP3PD15 15’ 7” W/MARKER
Great Plains
3PD15
15’
7”
26
1
0
$2,457.00
BMK215703PD15
Great Plains
3PD15
15’
7”
26
1
0
$2,457.00
BMK215753PD15-1
BELT METER KIT-GP3PD15 15’ 7.5” W/MARKER
Great Plains
3PD15
15’
7.5”
24
1
0
$2,310.00
BMK215753PD15
Great Plains
3PD15
15’
7.5”
24
1
0
$2,310.00
BMK215803PD15-1
BELT METER KIT-GP3PD15 15’ 8” W/MARKER
Great Plains
3PD15
15’
8”
22
1
0
$2,162.00
BMK215803PD15
Great Plains
3PD15
15’
8”
22
1
0
$2,162.00
BMK215103PD15
Great Plains
3PD15
15’
10”
18
1
0
$1,867.00
BMK215153PD15
Great Plains
3PD15
15’
15”
12
1
0
$1,425.00
BMK220753PD20
Great Plains
3PD20
20’
7.5”
32
2
0
$3,440.00
BMK220803PD20-1
BELT METER KIT-GP3PD20 20’ 8” W/MARKERS
Great Plains
3PD20
20’
8”
30
2
0
$3,292.00
BMK220803PD20
Great Plains
3PD20
20’
8”
30
2
0
$3,292.00
BMK220103PD20-1
BELT METER KIT-GP3PD20 20’ 10” W/MARKERS
Great Plains
3PD20
20’
10”
24
2
0
$2,850.00
BMK220153PD20
Great Plains
3PD20
20’
15”
16
2
0
$2,260.00
BMK230702SF30
BELT METER KIT-GP2SF30 30’ 7”
Great Plains
SF30
30’
7”
52
2
0
$4,914.00
BMK24580SS45
BELT METER KIT-GPSS45 45’ 8”
Great Plains
SS45
45’
8”
66
3
0
$6,044.00
BMK23075SS87
BELT METER KIT-GPSS’87 30’ 7.5”
Great Plains
SS87
30’
7.5”
48
2
0
$4,619.00
BMK23015SS87
BELT METER KIT-GPSS’87 30’ 15”
Great Plains
SS87
30’
15”
24
2
0
$2,850.00
Case-IH Belt Meter Kits
Product ID
Description
Make
Model
Lift Kit
Price
BMK415705400
BELT METER KIT-CIH5400 15’ 7”
Case IH
5400
15’
7”
26
1
0
$2,457.00
BMK415755400
BELT METER KIT-CIH5400 15’ 7.5”
Case IH
5400
15’
7.5”
24
1
0
$2,310.00
BMK415805400
Case IH
5400
15’
8”
22
1
0
$2,162.00
BMK415105400
Case IH
5400
15’
10”
18
1
0
$1,867.00
BMK415155400
Case IH
5400
15’
15”
12
1
0
$1,425.00
BMK420705400
Case IH
5400
20’
7”
34
2
0
$3,587.00
BMK420755400
Case IH
5400
20’
7.5”
32
2
0
$3,440.00
BMK420805400
Case IH
5400
20’
8”
30
2
0
$3,292.00
BMK420105400
Case IH
5400
20’
10”
24
1
0
$2,310.00
BMK420205400
Case IH
5400
20’
20”
12
1
0
$1,425.00
BMK430705500
Case IH
5500
30’
7”
52
2
0
$4,914.00
BMK430755500
Case IH
5500
30’
7.5”
48
2
0
$4,619.00
6
800.368.7773
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
Case-IH Belt Meter Kits - Continued
Product ID
Description
Make
Model
Lift Kit
Price
BMK430105500
Case IH
5500
30’
10”
36
2
0
$3,735.00
BMK415155400-12
BELT METER KIT-CIH5400 SS 15’ 15”
Case IH
5400SS
15’
15”
12
1
0
$1,425.00
BMK415155400-11
Case IH
5400SS
15’
15”
11
1
0
$1,354.00
BMK420155400-16
Case IH
5400SS
20’
15”
16
1
0
$1,720.00
BMK420155400-15
Case IH
5400SS
20’
15”
15
1
0
$1,649.00
BMK420155400-14
Case IH
5400SS
20’
15”
14
1
0
$1,572.00
BMK430155500
Case IH
5500SS
30’
15”
24
2
0
$2,850.00
S.I. Belt
Meter
Parts
S.I. Belt Meter Parts
Key
1
2
3
7
8
6
5
4
10
11
9
Product ID
Description
BMP001000
BMP001005
BMP001500
BMP002000
BMP002005
BMP003000
BMP003005
BMP005000
BMP005001
BMP005002
BMP005003
BMP005004
BMP005005
BMP005008
BMP005009
BMP005011
BMP005012
BMP005013
BMP005014
BMP005015
BMP005016
BMP005018
BMP005022
BMP006169
Belt Meter, John Deere, complete
Retaining cap, John Deere (not shown; fits on top of meter
Belt Meter, clear, with handle, for display purposes only, complete
Belt Meter, Great Plains, angled top, complete
Retaining cap, Great Plains, angled top (not shown; fits on top of meter
Belt Meter, Great Plains, Case-IH, flat top, complete
Retaining cap, Great Plains, Case-IH, flat top (not shown; fits on top of meter
Meter housing, John Deere, right hand
Meter housing, John Deere, left hand
Meter housing, Great Plains, Case-IH, flat top, left hand
Meter housing, Great Plains, Case-IH, flat top, right hand
Meter housing, Great Plains, angled top, left hand
Meter housing, Great Plains, angled top, right hand
Seed belt
Brush, cutoff
Brush, drop
Drive sprocket
Spool
Lower idler
Screw, Phillips head, #10-24 x 1/2
Flange nut, #10-24
Cap, plastic, for grass seed tube (not shown)
Cotter pin, humped
Soybean Screen, to check seed size (not shown)
Qty/Meter
Price/Each
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
7
7
1
1
$79.00
$7.20
$79.00
$79.00
$7.20
$79.00
$7.20
$11.85
$11.85
$11.85
$11.85
$11.85
$11.85
$5.95
$6.95
$8.75
$18.75
$3.25
$3.25
$0.12
$0.25
$0.60
$0.85
$17.50
S.I. Distributing offers a service to inspect and repair customer’s Belt Meters
Product ID
Description
BMP008100
Meter disassmbley, inspection, repair & reassembly (plus parts)
BMP008151
Meter fixture, makes disassembly & reassembly of your own meters easier
BMP008151
Price
$8.00
www.sidist.com
$36.95
7
Precision Meter
Better Seed Spacing for More Harvestable Ears
At 5 mph on 30-inch rows, your meter is turning at 65 rpm. At that speed, precision matters.
Springs, fingers, cams, backing plates, belts, housings, covers, brushes, bearings – everything
must work together to get seed to the ground every 6.8 inches.
In the Precision Meter, everything does work together. Every part is precisely designed,
engineered and manufactured to work with every other part. So every 6.8 inches, it plants one
seed. Compared to ordinary, less precise meters, this instantly produces more ears, 6+ bushels
more, from every acre.
At $6.00 per bushel, that’s $36.00 per acre. No wonder many top producers are upgrading to
Precision Meters or ordering new planters without meters and adding Precision Meters.
The Precision Meter contains the following parts:
Precision Finger Set – The shape and design of the finger determines how well it can singulate and hold
a single seed – round or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds
under the flag for secure delivery to the seed belt.
PopMax Backing Plate – The special Kevlar® impregnated poly backing plate presents a flatter more
consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than
metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes.
Adjustable Brush – For the first time, with just a set screw, you can change the aggressiveness of your
meter. Set the brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further
inside the finger for small seeds so it can aggressively remove doubles.
SkipStop – With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce
skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt
for delivery to the seed tube.
SureFire Seed Belt – A seed released down the center of the tube can catch up with one bouncing around
because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/
double. The new SureFireTM cupped seed belt releases down the center every time for sure spacing and more ears.
Precision Meters
When everything works
together, every seed ends up
where it belongs, producing
picket fence stands, maximum
yields and an extra $36 per
acre for you.
Please reference chart on
pages 12-13 to identify
correct seed tube applications.
Product ID
Description
PPM343022
PPM343072
PPM343063
Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, corn
Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 6-fingers, corn
Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, sweet corn
$180.00
$184.00
$195.00
Price
PPM343025
PPM343099
PPM343101
Precision Meter, John Deere 7200, 7300, 1700 series, 12-fingers, corn
Precision Meter, John Deere 7200, 7300, 1700 series, 6-fingers, corn
Precision Meter, John Deere 7200, 7300, 1700 series, 12-fingers, sweet corn
$180.00
$184.00
$195.00
PPM343030
PPM343071
PPM343105
Precision Meter, Kinze 3000 series, 12 fingers, corn
Precision Meter, Kinze 3000 series, 6-fingers, corn
Precision Meter, Kinze 3000 series, 12-fingers, sunflower
$180.00
$184.00
$240.00
PPM343050
PPM343051
PPM343055
Precision Meter, Great Plains planters, 12-fingers, corn
Precision Meter, Great Plains planters, 6-fingers, corn
Precision Meter, Great Plains planters, 12-fingers, sunflower
$180.00
$180.00
$240.00
Product ID
PPM345020
PPM345021
PPM345022
Description
John Deere 7000, 7100; Kinze 2000 series (PPM343022 & PPM700150)
John Deere 7200, 7300, 1700 series (PPM343025 & PPM700160)
Kinze 3000 Series (PPM343030 & PPM700150)
Product ID
PPM345026
PPM345027
PPM345028
Description
John Deere 7000, 7100; Kinze 2000 series (PPM343022 & PPM700250)
John Deere 7200, 7300, 1700 series (PPM343025 & PPM700200)
Kinze 3000 Series (PPM343030 & PPM700250)
Note: For planters with Keeton Seed Firmers the new WaveVision firmer tail is required.
Precision Meter & Universal Bullseye Seed Tube Kits Save $8.00 per row
Price
$187.50
$187.50
$187.50
Precision Meter & Wave Vision Seed Tube Kits Save $13.00 per row
8
800.368.7773
Price
$307.00
$307.00
$307.00
Precision Meter Parts
Precision Finger Set
The shape and design of the finger determines how well it can singulate and hold a single seed – round
or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag for
secure delivery to the seed belt.
Product ID
PPM343029
PPM343053
PPM343064
PPM343065
PPM343067
PPM343104
Description
Precision Finger set, 12-finger, corn
Precision Finger set, 6-finger, narrow row corn
Precision Finger set, 12-finger, sweet corn
Precision Finger set, 6-finger, pumpkin
Precision Finger set, 12-finger, sunflower
Precision Finger set, 12-finger, popcorn
Price
$35.00
$37.00
$57.00
$57.00
$135.00
$57.00
Precision Finger Set
Precision PopMax Backing Plate
The special Kevlar® impregnated poly backing plate presents a flatter more consistent platform for the
Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable
inserts let you make adjustments for varying seed sizes and shapes. Includes adjustable brush.
Product ID
PPM342103
PPM342111
PPM342110
PPM342107
PPM342108
Description
Precision PopMax Backing Plate with “A” insert & adjustable brush
Precision PopMax Backing Plate with “C” insert & brushless blank
Replacement “A” Insert, most field corn and larger popcorn
Replacement “B” Insert, flat field corn with heavy seed treatment and small to medium popcorn
Replacement “C” Insert, sunflower, sweet corn and edible beans
Price
$36.00
$36.00
$6.25
$6.25
$6.25
Precision Brushes
For the first time, with just a set screw, you can change the aggressiveness of the Precision meter. Set the
brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further inside
the finger for small seeds so it can aggressively remove doubles.
Product ID
PPM343052
PPM343049
PPM343060
Description
Precision Adjustable Brush
Pkg of 2, Precision Maroon Brush, Non-Adjustable, for Precision PopMax plate
T-Handle for Adjustable Brush
Price
$7.50
$5.00
$3.00
Precision SkipStop Cover
With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips
that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed
belt for delivery to the seed tube. Includes cushion.
Product ID
PPM343024
PPM343014
PPM343073
PopMax
Backing Plate
Description
Precision SkipStop Cover, with cushion, all except Great Plains
Replacement SkipStop Cushion
Replacement SkipStop Cushion, Great Plains
Adjustable Brush
Price
$22.50
$16.00
$17.00
Precision SureFire Seed Belt
A seed released down the center of the tube can catch up with one bouncing around because it was
released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/double. The
new SureFire™ cupped seed belt releases seed down the center every time for sure spacing and more ears.
Product ID Description
PPM343066 Precision SureFire Seed Belt
Price
$11.50
SkipStop Cover
Meter Re-Power Plus Kit
Includes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover,
SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush.
Precision Re-Power Kits Save $4.50 Per Row
PPM345024 Precision Re-Power Kit, John Deere 7000, 7100; Kinze with PPM700150 Bullseye
PPM345025 Precision Re-Power Kit, John Deere 7200, 7300, 1700 series with PPM700160 Bullseye
Price
$118.50
$118.50
Please reference chart on pages 12-13 to identify correct seed tube applications.
Product ID
PPM343062
PPM343098
PPM343102
Miscellaneous Replacement Parts
Description
Drive Wheel for seed belt
Cover for Precision Meter, John Deere 7000, Kinze 2000
Ash Tray, finger holder
Price
$6.50
$8.90
$7.50
SureFire Seed Belt
www.sidist.com
9
PLANTER REPLACEMENT
PARTS
Planter Replacement Parts
Application
OEM#
PLT037474
Double Disc Opener Assembly
15” diameter x 3.5mm thick
Includes blade, bearing, hub, dust
cap
John Deere MaxEmerge series row units
Kinze, all
White 6000 series
AA20242,
AA37474,
AA55927
GA8324
852063
$29.95
PLT065248
Double Disc Opener Assembly
15” diameter x 3.5mm thick
Includes blade, bearing, hub, dust
cap
John Deere XP series row units
AA65248
$31.95
PLT061577
Seed Tube Guard
Seed tube guide welded to guard
John Deere 1700 series with curved seed
tubes
Will not fit XP series
A61577,
AA54755
$8.95
PLT080203
Seed Tube Guard
Seed tube guide welded to guard
John Deere XP series with curved seed tubes
A80203
$8.95
PLT079648
Pivot Arm
Two required per row
John Deere 1700 series; MaxEmerge XP and
XP Pro units
Gauge wheel arm mounts to planter with
100mm long bolt
Gauge wheel mounts to arm with bolt
A79648
$23.25
PLT054179
Pivot Arm
John Deere 1700 series; MaxEmerge Plus and
Pro units
Gauge wheel arm mounts to planter with
100mm long bolt
Gauge wheel mounts to arm with set screw
A54179,
A79647
$23.25
PLT154179
Self Aligning Bushing
16mm (5/8”) inside diameter
John Deere late MaxEmerge 2; all MaxEmerge
Plus, Pro, XP, XP Pro
A57058
Used in PLT006614, PLT079648 and PLT054179
kits
$9.95
PLT041968
Pivot Arm
John Deere 7200, 7300 and early 1760, 1780
MaxEmerge 2 units
Gauge wheel arm mounts to planter on 1”
diameter pin
Gauge wheel mounts to arm with set screw
AA41968
PLT141968
Self Aligning Bushing
1” inside diameter
John Deere 7200, 7300 and early 1760, 1780
MaxEmerge 2 units
Used in PLT041968 kits
A57057
PLT035951
Bearing, Gauge Wheel
For roll pin style gauge wheels
John Deere MaxEmerge, MaxEmerge 2 prior
to 1992
Kinze prior to 1993
Case 800, 900, 1200 series (to S/N
CBJ0001610)
White 5100, 5700
PLT006614
Pivot Arm
Kinze 2000 series, 1993-1999
Gauge wheel mounts to arm with bolt
800.368.7773
10 CALL TOLL-FREE TO ORDER TODAY.
Photo
AA35951
128558C91
GA6614
Price
$23.25
$9.95
$8.95
$21.95
VenHuizen AccuVac Kit
The VenHuizen AccuVac Kit for John Deere Improves
The Desired Planting Population For Corn
The VenHuizen AccuVac kit for John Deere can also plant most
sizes of seed corn, even mixed sizes, without changing the plate
and with minimal vacuum level changes on the planter.
Seed Guide Helps Funnel The Seed To
Center of Seed Tube
VenHuizen AccuVac Kits
Product ID
Description
Price
AVC020000
AccuVac Kit, all John Deere except Pro-Series
$65.00
AVC020560
AccuVac Kit, John Deere Pro-Series
$75.00
AVC030001
Replacement AccuVac Seed Plate
$29.95
AVC021100
Package of 4, Seed Guide Kit
$20.00
AVC021200
Package of 6, Seed Guide Kit
$30.00
The features are:
• VenHuizen AccuVac 40-hole seed corn plate replaces the 30-cell seed corn disk
• The vacuum meter turns slower since the AccuVac 40-hole seed plate makes fewer revolutions to plant the same number
of seeds as the original 30-cell disk
• Since the vacuum meter is turning slower, the planter can travel at a faster
ground speed without increasing meter RPM’s when compared to the original meter
• The VenHuizen AccuVac plate allows for better seed pickup on hillsides and in high humidity conditions
• The modified adjustable “Seed Singulator Kit” virtually eliminates doubles, which significantly improves the desired
planting population. The design of the seed singulator allows for one setting regardless of the seed size
• Seed Guide funnels seed to center of seed tube to eliminate seed bounce which causes erratic seed spacing in the row
Kit includes:
• A VenHuizen AccuVac 40-hole seed corn plate
• The modified adjustable “Seed Singulator Kit”
• Adjustment tool to properly set the singulator kit
• New seed guide
• Installation hardware and detailed instructions
The VenHuizen AccuVac kit is available
for all John Deere vacuum meters
including the dual seed inlet meter
and Pro-Series meter.
www.sidist.com
11
Bullseye Seed Tube
Seed Tube Bounce or Ricochet Can Ruin the Best Meter Singulation.
Every time a seed hits the seed tube wall it slows down. Slow seeds lead to erratic spacing, causing the familiar skip/
double pattern that leads to lost yields.
It happens because ordinary seed tubes have catch points that interfere with the seed’s descent. So we eliminated them. In our
new BullsEye seed tube, we moved the sensor out of the way - offset it just enough so that it won’t snag the seed. So there’s
nothing in the way of a smooth, consistent ride down the tube. And we made that tube out of a special nylon that speeds the seed
on its way.
We also eliminated the biggest wear issue with seed tubes: the way openers wear away their tips. That not only shortens the tube’s
life, it leads to spotty spacing because seeds scatter when they hit that worn spot. Tungsten carbide tips insure that the BullsEye
will long outlast ordinary seed tubes. Your replacement costs will plummet.
Offset Sensor to Reduce
Seed Catchpoints
Redesigned Tip for Less Wear
• Bullseye (left)
• Conventional (right)
Bullseye Seed Tubes
Make
Model
Not Available Not Available
Case-IH
All
Note
Price
PPM700150
Bullseye, for 1/2” and 3/4” sensors Great Plains
Yield Pro Planters
PPM700150
Bullseye, for 1/2” and 3/4” sensors
7000, 7100
PPM700160
7200, 7300
Requires PPM700137
$15.50
PPM700160
1700 series
Model year -2006 requires PPM700137
$15.50
PPM700160
1700 series
Model year 2007- requires PPM700167
$15.50
PPM700150
PPM700150
PPM700158
Bullseye, for 1/2” and 3/4” sensors Monosem
All
PPM700155
5100 series
PPM700155
Bullseye, for 1/2” and 3/4” sensors White
6000 series
$15.50
PPM700155
8000 series
$15.50
John Deere
Kinze
$15.50
$15.50
2000 series
3000 series
$15.50
Except EdgeVac
$15.50
$15.50
Modification required
$15.50
Seed Tube Mounting Accessories
Bullseye Advantages:
• Reduces seed tube bounce
• Reduces excessive wear
800.368.7773
Price
PPM700137
Pkg of 4, Pin & clip for John Deere 7200, 1700 series ( model year -2006) to
install Bullseye seed tubes on planters with mounting holes in shank
$5.00
PPM700167
Pkg of 4, Spring pin for John Deere 7200, 1700 series ( model year 2007-)
to install Bullseye seed tube on planters without mounting holes in shank
$10.00
Note: 1/2” seed tube hole is for low rate sensors and 3/4” seed tube hole is for high rate sensors.
WAVEVISION Seed Tube
Better information in. Better information out.
For measuring population, seed spacing, skips and doubles, you depend on the
accuracy of your seed sensors. But optical sensors have four big problems:
•
•
•
•
Dust looks just like seeds
Doubles look like singles
Dust coats the eyes
They mount at the middle of the seed tube
Because optical sensors use light beams, they are susceptible to all the things that can falsely break that beam. That’s why dust is such a problem.
Dust that blows up the seed tube looks like seed. So the optical sensor routinely over counts seeds, which undercuts your population. Of course
there are times when you can tell dust is the issue – when you’re planting with the wind and your population spikes ten or twenty thousand
seeds. But more harmful impact is the day-in day-out over reporting of seeds because of dust.
And then there is the problem of dust coating the sensor eyes and failing all together. Optical sensors must be mounted at the middle of the
seed tube in order to keep them out of the dust. But most of the seed-delaying seed tube bounce happens in the lower part of the tube. So you
really don’t have a good idea of seed spacing with an optical sensor.
And finally, optical sensors look at the surface of the seed – just the plane that breaks the
beam. So, two seeds (a double) that move along the seed tube
together will be reported as a single seed, again under reporting
the actual population and accurate numbers.
Optical sensors can’t distinguish dust and
debris from seeds. WaveVision can, and gives
you an accurate count.
PPM700200
PPM700250
PPM700255
PPM700260
PPM700266
WaveVision eliminates these problems and provides good
clean information to your monitor. High
frequency radio waves, rather than
light, engulf seeds so that you
get a “three-dimensional” look
at seeds. It sees mass, not
shape. So doubles look like
doubles. The radio waves
also see through dust. And
that means we can mount
the seed sensor where it
belongs, at the bottom of
the seed tube.
WaveVision Seed Tubes
Price
WaveVision Seed Tube, John Deere 7200, 7300, 1700 series
WaveVision Seed Tube, John Deere 7000, 7100; Kinze; Great Plains Yield Pro
WaveVision Seed Tube, White 5000, 6000, 8000 series
WaveVision Seed Tube, Monosem
WaveVision Power Module, for planters without 2020 SeedSense
Note: For planters without Precision Planting’s 2020 SeedSense a power module is required.
See page 12 for Seed Tube Mounting Accessories
Keeton Seed Firmer Tails Only for WaveVision
KTN125011
KTN115013
KTN126010
KTN121006
KTN125012
KTN115011
KTN126008
KTN121004
KTN125013
KTN115012
KTN126009
KTN121005
Price
WaveVision Firmer Tail, dry tail only, fits in Universal or Kinze bracket
WaveVision Firmer Tail, dual tube tail only, fits in Universal or Kinze bracket
WaveVision Firmer Tail, short low profile tail only, fits in Universal or Kinze bracket
WaveVision Firmer Tail, long low profile tail only, fits in Universal or Kinze bracket
Note: For planters with Keeton Seed Firmers a new WaveVision firmer tail is required.
$140.00
$140.00
$140.00
$140.00
$100.00
Keeton Seed Firmer Kits for WaveVision
$34.50
$34.50
$34.50
$34.50
Price
WaveVision Firmer, Universal bracket & dry tail
WaveVision Firmer, Universal bracket & dual tube tail
WaveVision Firmer, Universal bracket & short low profile tail
WaveVision Firmer, Universal bracket & long low profile tail
WaveVision Firmer, Kinze bracket & dry tail
WaveVision Firmer, Kinze bracket & dual tube tail
WaveVision Firmer, Kinze bracket & short low profile tail
WaveVision Firmer, Kinze bracket & long low profile tail
Note: For planters with Keeton Seed Firmers the new WaveVision firmer tail is required.
$37.00
$37.00
$37.00
$37.00
$37.00
$37.00
$37.00
$37.00
Not compatible with these
monitors: AGCO GTA, KPM I,
II or III, Kinze Vision, Monosem
MPM, SM400SE and GTA.
www.sidist.com
13
cleansweep
NOW, with CleanSweep™, you no longer have to hope, but you can manage your row cleaner
performance, from the cab, on the go.
Row Cleaners are a great planter attachment for handling excessive residue during planting. They remove the plant debris and create a uniform seedbed; However, too light of setting leaves residue in the row competing for moisture and nutrients. Too heavy of
setting tills and moves soil creating trenches and potentially alter planting depth.
Properly set row cleaners and floating row cleaners are ways growers could look to reduce these negative impacts, but conditions
can vary greatly from field to field, day to day, even row to row. And, making these adjustments are time consuming. Thus, most
growers set for the average and hope for good performance.
CleanSweep is a dual air cylinder that lets you set and adjust your
row cleaners’ down pressure from the cab.
1. Have heavy residue? Add more pressure to sweep away the
debris.
2. Have light residue or soft ground? Lighten the pressure and
keep the row cleaner floating across the top.
The cylinders have a control box mounted in the cab. You set the
pounds of pressure from your cab based on the condition you are in.
Plus, the pressurized cylinder gives the row cleaner the ability to adjust
or “float” across the small changes you encounter such as terrain or varying
amounts of debris
The CleanSweep system includes air cylinders, lines, air tank, compressor
and controller. Available for these row cleaner models:
•
•
•
•
Martin C125 MTS, MTS-XP, MTS-81, MTS-IH
Martin C125 MTR, MTR-XP, MTR-81, MTR-IH
Martin WA1360 BD, BK, BW, BCIH, BDC
.Yetter 2967-007, 2967-029, 2967-035 (short bracket), 2967-035, 2967042, 2967-043, 2967-115
Need more aggressive cleaning?
These new, larger 3-1/2” treader wheels allow you to
increase pressure on your row cleaner while keeping
the row cleaner atop the terrain, a handy way to move
through heavy residue while reducing the amount of
soil you move.
Please Call for Current Pricing on
Specific Makes and Models.
800.368.7773
• Heavy residue – add
more pressure
• Light residue – lighten
the pressure
• Soft ground – lighten
the pressure
• Maintains row cleaner
floating ability
Martin Planting
Attachments
All Martin Row Cleaners
Feature the Following:
Martin Row Cleaners
•Heavy duty frame
• 3/8” thick, heat treated, T-1
wheels
• Stationary triple-lip seals
• Heavy gauge dust caps
• Double tapered bearings
• Greaseable hubs
Properly designed row cleaners provide a very desirable type of tillage. The row cleaner teeth continuously
engage the soil to the shallow depth of 1” to 1-1/2”. This scarifying of the soil’s surface layer makes it easier
for the seed openers to open a well-defined “V” but without furrowing out or causing slabbing or flaking.
Eliminating furrows is the key to preventing erosion in the row on slopes and the ponding of water over the row
in level areas.
Martin Row Cleaners come in two basic types:
Pin Adjust: Our pin adjust models are more aggressive row cleaners and are particularly useful when a furrow is
needed to reach moisture. Pin Adjust models are available for all popular planters.
Floating: The WA1360 floating row cleaners are designed to follow the contours of the soil
surface, consistently moving residue away from the path of the gauge wheels. This allows
the gauge wheels to run in the cleared zone to promote uniform depth control and facilitate
quicker soil warning and rapid emergence. Floating models fit most planters and may be used
ahead of most no-till coulters and certain fertilizer openers including the Martin UMO-100.
The Martin-Till Planting System
1. Row cleaners move residue and lightly till the row
2. Fertilizer opener places liquid fertilizer beside the row
3. Keetons firm the seed in the bottom of the seed trench
4. Spading closing wheels lift and fracture the sidewall
5. Drag chains level and lightly firm the row top
WA1360 Floating Row Cleaner
• Most compact floating row cleaner available. Only requires 19” of clearance from planter
face plate, 22” when using with no-till coulter and 25” when using with Martin UMO-100
fertilizer opener
• Optional rear lever adjustment available (no tools needed, no under planter work)
• Optional dial depth adjustment
• Wheels can be installed in the intersected, offset, or retracted operating positions
Martin WA1360 Floating Row Cleaners
Product ID Vendor ID Description
MRT001360
WA1360
Price
Wrap around floating row cleaner, 13” wheels (mounting bracket not included)
Martin WA1360 Mounting Brackets
$334.50
Price
MRT001361 MT1360KS John Deere 7000, 7100, Kinze, White EARLY 6000 series w/o no-till coulters
$79.50
MRT001363* MT1360KU John Deere 7000, 7100, Kinze, White EARLY 6000 series with Martin UMO
$89.50
MRT001362 MT1360DS John Deere 7200, 7300, 1700 without no-till coulters
$79.50
MRT001368 MT1360DC John Deere 7200, 7300, 1700 with OEM unit mount, no-till coulter
$79.50
MRT001365* MT1360DU John Deere 7200, 7300, 1700 with Martin UMO
$89.50
MRT001376 MT1360DD John Deere 7200, 7300, 1700 with OEM double disc fertilizer openers
$84.50
MRT001367 MT1360KC Kinze with OEM double arm, unit mount, no-till coulter
$79.50
MRT001369 MT1360CIH Case-IH 800-1200 series without no-till coulters
$102.50
MRT001371* MT1360CU Case-IH 1200, 1300 series with Martin UMO (requires MRT007106 listed below)
$99.50
MRT001374 MT1360WS White LATE 6000 series, all 8000 series without no-till coulters
$79.50
MRT001375* MT1360WU White LATE 6000 series, all 8000 series with Martin UMO
$89.50
*Only one bracket is required to mount both Martin WA1360 row cleaner and Martin UMO-100 fertilizer opener.
Martin WA1360 Accessories
MRT003002
MRT003146
STW-04
WW-04
MRT003154
MRT003155
MRT003500
MRT003510
MRT007106
CA-03D
CA-03K
USB-70
USB-72
HDP-CIH01
Price
Aluminum side treader wheel (2 required per row) 4-bolt
Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each
Cam adjustment kit, all JD; Kinze w/o no-till coulters; White 6000, 8000 series
with UMO; Case-IH 1200 series with UMO, WA1360 row cleaners
Cam adjustment kit, Kinze with OEM no-till coulters, WA1360 row cleaners
Unit set back bracket, John Deere 7000, 7100, Kinze
Unit set back bracket, John Deere 7200, 7300, 1700 Series
Heavy duty lower parallel linkage set, CIH 1200, 1300 series
$29.50
$21.00
$61.00
$61.00
$76.00
$109.00
$108.00
Optional
cam dial depth adjustment
WA1360
Operating Positions
A. Intersected
Good for no-till conditions
B. Offset
Use in freshly worked soil
or loose sandy conditions.
Suitable for no-till. May be
used behind certain forward
mounted fertilizer openers
C. Retracted
Use this position if the
overall length is too long.
www.sidist.com
15
Martin Row Cleaners
Martin Planting
Attachments
C125 Floating Row Cleaner
• The C-125 was replaced by the WA1360; however it is still available for certain planter configurations such as with
aftermarket no-till coulters.
• Floats to follow ground contour
• Threaded depth adjustment limits down travel while allowing the semi-mounted frame to follow the contour of the
land
• Moveable axles with the Martin Exclusive D-lock System allow several mounting positions (intersect, offset, retracted)
• 13” diameter left- and right-toothed steel wheels with diamond shaped points (15” wheels may be used on certain
planters)
• Includes internal deflectors protected under U.S. Patent #5,507,351
Side Treader Wheels
C125
Shown with optional side
treader wheels (STW-04)
Our side treader wheels are a very good option, one most customers order, for the floating row cleaners because
they help prevent unwanted trenching in softer parts of the field. Recent Farm Journal tests show a large yield
increase when using this option.
Martin C125 Floating Row Cleaners
Product ID
MRT012504
Vendor ID
C125
MRT112504
C125-GPTL
MRT212504
C125-GPTR
Product ID
Vendor ID
MRT001400
C125MTR
MRT001402
MRT001409
C125MTR-IH
C125MTR-81
MRT001404
C125MTR-XP
MRT001412
C125MTR-G1
Description
John Deere 7000, 7100, Kinze, White 6000 series, with no-till coulters, 24-3/4”
long
Case-IH 800, 900, 1200 series with no-till coulters, 28” long
White 8000 series with no-till coulters, 24-3/4” long
John Deere 7200, 7300, 1700 series with no-till coulters; Great Plains 6030; 243/4” long
Great Plains Yield-Pro Planter, 30” rows, use standard C125 row cleaner
Product ID
MRT003000
MRT003001
MRT003002
MRT003143
MRT003145
MRT003146
MRT003147
MRT003500
MRT003510
Vendor ID
STW-01
STW-01K
STW-04
CA-02
DP-01
WW-04
CDP-01
USB-70
USB-72
Description
Aluminum side treader wheel (2 required per row) 6-bolt, for Kinze
Cam adjustment kit, C125 floating row cleaners
Down pressure kit, C125 floating row cleaners
Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each
Cam adjustment & down pressure kit, C125 floating row cleaners
Unit set back bracket, John Deere 7000, 7100, Kinze
Unit set back bracket, John Deere 7200, 7300, 1700 Series
Product ID
MRT003900
MRT003901
MRT003905
MRT003906
MRT003909
MRT003910
MRT004158
MRT004159
MRT004177
MRT004178
MRT003908
MRT003902
Vendor ID
TW3813-L3
TW3813-R3
TW3813-L4
TW3813-R4
TW3813-LK
TW3813-RK
TW3815-L3
TW3815-R3
TW3815-L4
TW3815-R4
HA13305-D
HA13270-D
MRT003907
MRT003903
MRT004167
MRT004190
MRT004175
Description
Price
Wrap around floating row cleaner, 13” wheels (mounting bracket not included) $334.50
Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, LH
$299.50
Includes single wheel row cleaner, mounting bracket & side treader wheel
Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, RH
$299.50
Includes single wheel row cleaner, mounting bracket & side treader wheel
Martin C125 Mounting Brackets
Martin C125 Accessories
Martin Row Cleaner & Spader Wheel Replacement Parts
Description
Wheel, 13” 3-bolt, LH on row cleaner, RH on closing wheels
Wheel, 13” 3-bolt, RH on row cleaner, LH on closing wheels
Hub & Axle, 3-bolt, for Martin pin adjust row cleaners, WA1317, WA1330
Hub & Axle, 3-bolt, for Martin floating row cleaners, C125
Hub & Axle, 4-bolt, for Martin row cleaners, C125, WA1360, WA1332, WA1334,
HA44270-D
WA1532
CHU024
Hub, 3-bolt, for Martin closing wheels with single bearing, 5/8” I.D.
CHU022
Hub, 3-bolt, for Martin closing wheels with two bearings, 17mm I.D.
CHU044-B2 Hub, 4-bolt, for Martin closing wheels with single bearing, 5/8” I.D.
CHU44-A
Hub, 4-bolt, for Martin closing wheels with two bearings, 17mm I.D.
Note: 13” wheels should be replaced when 12” or less and 15” wheels when 13-3/4” or less
800.368.7773
C125MTR
C125MTR-IH
Price
$79.50
$85.00
$79.50
$79.50
$79.50
Price
$29.50
$34.00
$29.50
$41.00
$41.00
$21.00
$60.50
$76.00
$109.00
Price
$52.50
$52.50
$52.50
$52.50
$58.00
$58.00
$61.00
$61.00
$61.00
$61.00
$76.50
$76.50
$76.50
$41.00
$41.00
$59.00
$59.00
C125MTR-81
C125MTR-XP
STW-04
Side treader wheels
increase traction and
flotation. Useful in
loose soil or extremely
heavy residue. Two
required per row.
DP-01
Adds up to 20 lbs of
down pressure to row
cleaner. For use when
planting in severe soil
conditions.
CA-02
Allows adjustment
in 1/4” increments.
USB70/72
Unit set back kit.
Moves planter unit
back 6”.
WW-04
Wheel weights add
weight to row cleaner.
Helpful when planting
in heavy residue
situations.
CDP-01
Allows adjustment in
1/4” increments and
adds up to 20 lbs of
down pressure.
Martin Planting
Attachments
Martin Pin Adjust Row Cleaners
The Martin original style row cleaner clears the widest path of any tooth wheel row cleaner on the market.
The 15” diameter, 3/8” thick, T-1 heat-treated wheels are made left and right in order to shed the residue
better. The axles are located to the rear of the adjustable stem in order to insure a simultaneous stretching
and cutting of the residue. The teeth on the cleaning wheels actually reach past the edge of the planter
gauge wheel rubber.
WA1532 Martin Original Style Row Cleaner
• Rigidly mounted directly to planter unit face plate
• Easily adjustable in 1/4” increments with lift assist handle and spring
• 3/8” thick, 15” diameter, toothed steel wheels with diamond shaped points - largest on the market
• Cast 4-bolt hub
• Double tapered bearings
• Triple lip seals
WA1532
WA1332 and WA1334 Row Cleaners
• Rigidly mounted directly to planter unit face plate
• Easily adjustable in 1/4” increments with lift assist handle and spring
• Movable axles with the Martin Exclusive D-Lock System allow for several mounting positions (intersect,
offset, retracted)
• 13” diameter toothed steel wheels with diamond shaped points allow plenty of upward adjustment in
loosely worked soils
A. Intersected
For use in firm soil conditions
and severe residue.
WA1332 and WA1334 Operating Positions
A.
B.
WA1532 Dimensions
C.
B. Left or Right Offset
For moderate residue and
freshly tilled soil.
C. Retracted
Can be used behind certain
frame mounted coulters.
Martin Pin-Adjust Row Cleaners
MRT001320
MRT001332
MRT001334
MRT001532
WA1320N
WA1332
WA1334
WA1532
Price
Pin-adjust row cleaner, narrow row, 1-½” stem, 13” wheels
Pin-adjust row cleaner, 1-½” stem, 13” wheels
Pin-adjust row cleaner, 2” stem for Case-IH planters, 13” wheels
Pin-adjust row cleaner, 1-½” stem, 15” wheels
$321.00
$323.00
$323.00
$340.00
Martin Pin-Adjust Mounting Brackets
MRT002000
MT772
MRT000892
MT892
MRT001250
MRT002200
MT1250
MT512
MRT000610
MT610
MRT002100
MRT002400
MT810
MT385
MT772
Price
John Deere, Kinze and White EARLY 6000 series with REGULAR down pressure
springs, accepts 1-½” stem wheel assemblies
Case-IH 800, 900 series without heavy duty down pressure springs, accepts 2”
stem wheel assemblies
Case-IH 1200, 1300 series, accepts 2” stem wheel assemblies
White 5100 series, accepts 1-½” stem wheel assemblies
White EARLY 6000 series with HEAVY duty down pressure springs, accepts 1-½”
stem wheel assemblies
White LATE 6000 series and all 8000 series, accepts 1-½” stem wheel assemblies
Deutz-Allis Quadra Disk, Landoll, accepts 1-½” stem wheel assemblies
MT892
MT512
MT610
$72.00
$58.00
$58.00
$59.00
$73.00
WA1334
WA1332
WA1332 Row Cleaner
1-1/2” stem wheel assembly. For use with all
pin adjust brackets that
accept 1-1/2” stem.
WA1334 Row Cleaner
2” stem wheel assembly. For use with MT892
bracket.
$77.00
$59.00
MT810
MT385
www.sidist.com
17
Martin Planting
Attachments
UMO-100 Fertilizer Opener
The fertilizer opener mounts directly to the planting unit and is compact enough to be mounted
within the WA1360 and C125 floating row cleaners. Because the opener mounts directly to the
planter unit, the fertilizer is always precisely the same distance from the seed even when planting on
the contour. The lateral spacing from the seed can be 1”, 2”, or 3”, and there are three vertical settings
that allow fertilizer to be placed 3/4” above, even with, or 3/4” below seed depth. We like the way it
consistently places the fertilizer in the ground without splattering on the planter.
Apply nitrogen to side of seed furrow in a single pass.
UMO-100
FEATURES OF UMO-100:
Martin Unit Mounted Fertilizer Opener
Price
MRT100100 UMO-100L
Single disk unit mounted fertilizer opener, left
$358.00
MRT200100 UMO-100R
Single disk unit mounted fertilizer opener, right
$358.00
Martin Unit Mounted Fertilizer Opener Brackets
Price
MRT000300 UMO-MTJ
Bracket, John Deere 7200, 7300 & 1700 series planters
$33.00
MRT000301 UMO-MTA
Bracket, John Deere 7000, 7100 and Kinze planters
$33.00
MRT000302 UMO-MTW
Bracket, White 8000 series planters
Bracket, Great Plains Yield-Pro Planter, mounts on top of standard C125
bracket
$33.00
MRT000303 UMO-MTG
$33.00
• Sturdy compact design
• Double tapered bearing hub
• 5mm thick (0.197”) blade
• Adjustable furrow control
device
• Can be set to place liquids 1”,
2”, or 3” from seed row
• Can also be set to place
liquids 3/4” above, even with
or 3/4” below seed depth
• Fit John Deere 7000-1700
series, all Kinze, White 6000 &
8000 series and Case-IH 1200
& 1300 series.
• Patent #7,481,171
Reduced Inner Diameter Gauge Tires
RID-01 Tire
• Reduced inner diameter gauge tires
• Allows seed trench to lift and fracture
• Softer, more flexible compound better sheds wet soil
• Fits existing John Deere, Kinze, and White rims
• Two required per row
Note: Reduced inner diameter gauge tires are NOT
for use with John Deere XP series row units and NOT
recommended for use in tilled soil conditions.
Product ID
Vendor ID
Description
Price
MRT003730
RID-01
Reduced inner diameter gauge wheel tires (2 required per row)
$24.95
Twisted Drag Chain
DCK-01 drag chain kit
•
•
•
•
•
•
Crumbles, fills unclosed areas and levels soil above the seed slot
Heavy-duty, square-edged cross chain and brackets
Attaches to closing wheel brackets
Bolts to all John Deere Max-Emerge units
Fits Kinze and White units with bolt-on wheels
Kinze units with roll pin attached closing wheels will need holes drilled for mounting
Product ID
Vendor ID
Description
Price
MRT003600
DCK-01
Drag chain kit
$38.00
800.368.7773
Martin Planting
Attachments
Spading Closing Wheels
Martin spading closing wheels move soil
toward the seed at planting depth, while lifting
and fracturing the surface layer to achieve
compaction-free closing of the seed trench in
wet, hard or sod conditions. With soil firmed
around the seed from each side and the surface
layer loosened, crops emerge sooner and
planting can be done at the proper depth, even
in wetter conditions, without fear of crushed
soil above the seed preventing emergence.
Pictures above illustrate the difference between the
seed trench after the Martin Spading-Closing wheel
set passes on the left, compared to the seed trench
after the regular closing wheel set passes on the right.
Available for John Deere, Kinze,
White, Case-IH & Great Plains
Specific Advantages
• Speeds up warming of the row
area
• Closing wheel arm pressure can be
greatly reduced
• Seed trench is closed in the most
severe conditions
• Seed depth does not have to be
raised to insure emergence
• Soil above the seed is loose and
slightly mounded allowing quicker
emergence in a compaction-free
environment
• Sidewall compaction is greatly
reduced
Planter Spading Closing Wheels
SCW1341 Closing Wheels
• 3/8” thick, 13” diameter right and
left toothed steel wheels with
diamond shaped points
• Cast hubs
• Adaptor axles
• For planters with roll-pin attached hubs: Deere 7000 & 7100
series, early Kinze series planters
• Two 17mm I.D. bearings
• 3/8” thick, 15” diameter right or
left toothed steel wheel with
• Cast hub
• Adaptor axle
• For planters with roll-pin attached hubs: Deere 7000 & 7100
series and early Kinze planters
• 3/8” thick, 15” diameter right or
left toothed steel wheel with
• Cast hub
• For Deere 7200 & 7300 series
planters
• Cast hubs
• For Deere 7200-7300 series
planters
•
•
•
3/8” thick, 15” diameter right or left
toothed steel wheel with diamond
shaped points
Cast hub
For planters with bolt-on hubs:
Deere1700 series, Kinze and White
6000 & 8000 series planters
• Single 2-row 5/8” I.D. ball bearing
Martin Planter Spading Closing Wheels
MRT001343 SCW1343
MRT001344 SCW1344
MRT101541 SCW1541SL
MRT201541 SCW1541SR
MRT101543 SCW1543SL
MRT201543 SCW1543SR
MRT101544 SCW1544SL
MRT201544 SCW1544SR
MRT004191 DK-01
• Cast hubs
• For planters with bolt-on hubs:
Deere 1700 series, Kinze & White
6000 & 8000 series planters
• Single 2-row 5/8” I.D. ball bearing
MRT001341 SCW1341
Price
13” double closing wheel set, John Deere and Kinze planters with roll pin
attached closing wheels, water pump bearing
13” double closing wheel set, John Deere 7200, 7300, 1700 MaxEmerge 2
(threaded spindle on closing wheel bracket) and Great Plains 6030, 17mm
bearing
13” double closing wheel set, John Deere, Kinze, White, Great Plains planters
with bolt-on closing wheels, 5/8” bearing
15” single closing wheel, John Deere and Kinze planters with roll pin attached
closing wheels, LH, water pump bearing
15” single closing wheel, John Deere and Kinze planters with roll pin attached
closing wheels, RH, water pump bearing
15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded
spindle on closing wheel bracket) GP 6030, LH, 17mm bearing
15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded
spindle on closing wheel bracket) GP 6030, RH, 17mm bearing
15” single closing wheel, John Deere, Kinze, White, Great Plains planters with
bolt-on closing wheels, LH, 5/8” bearing
15” single closing wheel, John Deere, Kinze, White, Great Plains planters with
bolt-on closing wheels, RH, 5/8” bearing
Drop down kit. Bolts to John Deere or Kinze closing wheel frame with bolt-on
13” spading closing wheels. Lowers the closing wheels so the frame runs level.
$236.00
$223.00
$223.00
$126.50
$126.50
$120.00
$120.00
$120.00
$120.00
$21.00
In the past we thought the
only way to grow no-till crops
successfully was to wait until
the soil was dry enough for
the planter’s smooth closing
wheels to crumble the soil
over the seed.
Our long-standing struggle
with the problem prompted
us to find a solution that
we have since patented.
Customers around the
country are praising it.
www.sidist.com
19
Martin Planting
Attachments
Planter Spading Closing Wheels
SCW514 & SCW614 Double Closing Wheel Sets. These closing wheels can be added to the White 5000
or 6000 series planters that have single closing tires. The Martin Spading-Closing Wheels enhance closing
of the seed trench while the smooth wheel gently firms the surface.
Moist soil is moved toward the seed at seeding depth even in wet, hard or sod conditions. In wet conditions, the soil is prevented from forming a continuous ribbon by the lifting action of the teeth as they
rotate up out of the soil.
Other benefits include:
• Closing wheel arm pressure can be greatly reduced
• Seed trench is closed in the most severe conditions
• Seeding depth does not have to be raised to insure
emergence
• Soil above the seed is loose allowing quicker
emergence in a compaction free environment
• Sidewall compaction is eliminated
Advantages:
• Double 3/8” thick, 13” diameter,
left & right toothed steel wheels
with diamond shaped points
• Cast hubs with single 2-row ball
bearing
• Left & right angled brackets
• Does not change planter’s overall
length
White Planter
Martin Planter Spading Closing Wheels
Product ID
Vendor ID Description
MRT005104
SCW514
13” double closing wheel set, White 5100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame
$259.00
MRT006104
SCW614
13” double closing wheel set, White 6100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame
$259.00
MRT089903
SCW899
MRT004191
DK-01
Price
9” double closing wheel set, Case IH planters and John Deere & Kinze planters with shallow closing attachments, replaces
OEM covering discs
Drop down kit. Bolts to John Deere or Kinze closing wheel frame with bolt-on 13” spading closing wheels. Lowers the
closing wheels so the frame runs level.
SCW899
$116.00
$21.00
DK-01
• 9” diameter toothed steel
wheels & ball bearing hubs
• Replaces offset closing disk
on Case IH planters
• Also fit JD & Kinze shallow
closing systems
• Bolts to John Deere or Kinze
closing wheel frame with
bolt-on closing wheels.
• Lowers the closing wheels so
the frame runs level.
• Designed for paired 13”
spading closing wheels when
used in loose soils
Case-IH Planter
Martin Drill Spading Closing Wheels
Product ID
Vendor ID
Description
MRT175404
SCW75B4L
13” single spiked closing wheel, John Deere 750, 1850 drill, LH
$121.00
MRT275404
SCW75B4R
13” single spiked closing wheel, John Deere 750, 1850 drill, RH
$121.00
MRT075104
SCW75B4D-20R
13” single 20 pt. dimple closing wheel, John Deere 750, 1850, RH
$127.50
MRT075204
SCW75B4D-20L
13” single 20 pt. dimple closing wheel, John Deere 750, 1850, LH
$127.50
MRT115604
SCW1564L
13” single spiked closing wheel, John Deere 1560-1890 drills, LH
$83.50
MRT215604
SCW1564R
13” single spiked closing wheel, John Deere 1560-1890 drills, RH
$83.50
MRT315604
SCW1564D-20
13” single 20 pt. dimple closing wheel, John Deere 1560-1890 drills
$90.00
800.368.7773
SCW75B4
Spading-Closing
Wheel
Price
SCW75B4D
20 Point
Dimple-Closing
Wheel
SCW1564
Spading-Closing
Wheel
SCW1564D
20 Point
Dimple-Closing
Wheel
Quick Crank
Trashwhipper Adjuster
For Factory Installed, Pin-Adjust, Yetter Residue Managers on John Deere Planters
Will only work with Yetter model #2967-15 fixed row cleaners
Provides the Opportunity to Raise Height
of Residue Managers an Additional 3/4”
Features:
• Converts fixed pin-adjust residue managers to screw-adjust
• Height adjustments can be made in seconds while standing in front of the planter
• Extremely quick – approximately 60 seconds to adjust 12 rows
• Allows adjustments to be made easily in the field as conditions
change
• Installation requires no cutting or welding of original residue
managers or on the planter
• Provides the opportunity to raise height of
residue managers an additional 3/4”
• Powder coat painted
Quick Crank Trashwhipper Adjuster
Product ID
Description
PLT130602
PLT130601
Quick Crank Trashwhipper Adjuster
Crank Handle
Price
$99.00
$20.00
PLT130601
Depth-A-Matic
The Depth-A-Matic can easily be installed on your planter in approximately ten minutes per
row. Simply remove one depth control wheel, remove snap ring from pin, remove pin that
holds depth stop and remove old depth stop. Then install the Depth-A-Matic in its place, with
our replacement bolt and locknut.
Advantages include:
• It allows the depth gauge wheels to follow the ground terrain allowing the unit to travel
smoothly in all field conditions
• More equal compaction on either side of the disk
enhances seed to soil contact and equal emergence
• Consistent seed depth control
• Longer seed disk life in rocky conditions
• Life of depth gauge wheels is greatly extended in
all rocky and no-till conditions
• Less bearing failure on depth gauge wheels
• Includes installation hardware
John Deere
7200
7300
1700
Depth-A-Matic
Product ID
Description
DAM001000
Depth-A-Matic, John Deere 7000, 7100; Kinze (except Kinze 3000 series) and
New Idea planters
$32.95
DAM002000
Depth-A-Matic, John Deere 7200, 7300 and 1700 series (except John Deere XP
row units)
$41.95
DAM003100
Rocker, for Depth-A-Matic
$13.95
DAM003200
Roll pin, for Depth-A-Matic
$0.50
John Deere
7000
7100
Price
Depth-A-Matic Replacement Parts
Rocker
www.sidist.com
21
Seed Level Indicator
Are you ready for planting?
Where will you be when the planter runs out of seed? Eliminate the frustration of the uncertain.
You can save time and steps during the busy planting season by installing the Seed Level
Indicator on one or more of your planter seed boxes. It’s easy and will save you time.
Product ID
Description
Price
PLT100500
Seed Level Indicator
$ 99.95
One Wrench
Adjusts John Deere 750 & 1850 Grain Drills
Depth Using Only One Hand and One Wrench
The unique design of the new One WrenchTM allows you to adjust
the depth of the John Deere 750 & 1850 Grain Drills with only one
hand in one quick motion. The design incorporates several pads that
are used to depress the locking pin of the
adjusting plate. Upon releasing the locking Product ID Description
pin you can adjust the grain drill to the
DRL010001
One Wrench
desired depth. Patent No. 7249391
Price
$49.95
Works in Seconds - One Hand, One Motion
Kinze Brush Meter Adapter
Conversion Kit to Adapt to Kinze Brush-Type Seed Meter
to Fit a John Deere 7200, 7300 and 1700 Series Finger Pick-up Seed Box
Conversion kit includes:
1. Seed block for finger pick-up seed box
2. Metric bolt and nut
3. Detailed instructions for complete installation
PLT000100
Adapter kit, to install Kinze brush meter on John Deere
7200, 7300 and 1700 series planter
Price
$9.95
Note: Will not work on Kinze Brush Meters manufactured after July 2010 because the
shaft is now hardened and very difficult to modify.
800.368.7773
Planter Pivot Arm Kits
Original, Field Tested And Proven Quick-Adjusting Pivot Arm Replacement Kits With O-Ring Grease Seals
Planters with Roll Pin Gauge Wheels
All pivot arm kits include:
PLT110120 Pivot Arm Kit, John Deere 7000, 7100, 7200, 7300; Kinze
Price
$75.95
Planters with Bolt-On Gauge Wheels
Pivot Arm Kit, John Deere 7000, 7100, 7200, 7300, 1700
PLT110100 series; Kinze
Pivot Arm Kit, John Deere 1700 series with self-aligning
bushing
Note: A 16mm x 100mm bolt attaches OEM pivot arm to
planter row unit.
John Deere’s self-aligning bushing is not re-used.
PLT110115 Kit includes new threaded spindle, bolt and lock washer.
Price
$75.95
• 2- Heavy duty cast pivot arms with o-ring grooves
• 2- Counterbored, heat-treated bushings with a grease groove
• 4- O-rings for pivot arms
• 2- Key handle wrenches used for adjustment
• 2- 7-gauge flat washers used for installation
• 10- 14 gauge shim washers used for adjustment
• Installation instructions
$85.95
Planters with Set Screw Gauge Wheels
Pivot Arm Kit, John Deere 7200, 7300 (1992 and newer),
1700 series
PLT110140 planter row unit.
Pivot Arm Kit, John Deere 1700 series with self-aligning
bushing
planter row unit.
John Deere’s self-aligning bushing is not re-used.
PLT110146 Kit includes new threaded spindle, bolt and lock washer.
Price
$75.95
$85.95
Note: Bolts for planter re-installation not included.
Product ID
PLT110200
PLT110210
PLT110220
PLT110180
PLT110250
PLT110251
PLT110254
PLT110256
PLT110257
PLT110264
Pivot Arm Replacement Parts
Description
Price
Pivot arm only, threaded, each
Pivot arm only, roll pin, each
Pivot arm only, set screw, each
Bearing Kit, includes 2 gauge wheel bearings, 5/8” x 3”
bolts and lock washers
Bearing, 40mm, for gauge wheels
Counterbored bushing, each
O-ring, (2 required per arm) each
Shim washer, 14-gauge, each
Key handle wrench, without washer, each
Flat washer, 7-gauge, 1/2” ID, each
$29.95
$29.95
$29.95
$17.95
$7.95
$5.95
$0.40
$0.30
$3.75
$0.95
V-Closing Wheel
Conversion Bracket
Product ID
PLT125001
V-Closing Wheel Bracket, White 5000 & 6000 Series Planters
Description
Bracket kit, to convert planter to v-closing
wheels
Includes shim washers for spacing wheels
to desired width
Price
$39.95
V-Closing Wheel Bracket, Case-IH 800 & 900 Series Planters
PLT125101
Case-IH Planter
White Planter
Bracket kit, to convert planter to v-closing
wheels
Includes shim washers for spacing wheels
to desired width
$79.95
www.sidist.com
23
Closing Wheel BracketS
Update Your John Deere And Kinze Planter For Quick And Easy Down Pressure Adjustment
Parts Include:
Closing Wheel Bracket Kits
Price
PLT120700
Closing Wheel
Bracket, John
Deere 7000, 7100
with roll pin
attached wheels
$59.95
PLT120710
Closing Wheel
Bracket, Kinze
1993 and earlier
with roll pin
attached wheels
$59.95
PLT120720
PLT120730
PLT120740
Closing Wheel
Bracket, Kinze
1994 and newer
with bolt-on
wheels
$59.95
Closing Wheel
Bracket, John
Deere 7000, 7100
converted to bolton wheels.
Includes hardware
kit to bolt wheels
on bracket.
$59.95
Closing Wheel
Bracket, John
Deere 7200, 7300,
1700 converted to
bolt-on wheels.
Includes hardware
kit to bolt wheels
on bracket.
$59.95
· New and improved bracket allows opportunity to offset
the V-Closing wheels
· Hardened hex step bushings that are replaceable; saves
wear and tear on the bracket
· Hardened 1” eccentric bushings to correct misalignment
· Heavy duty down pressure spring
· Cast “T” handle for quick adjustment of down pressure
· Bolt and locknut for handle
Closing Wheel Bracket Replacement Parts
Product ID
Description
Price
PLT120550
Eccentric bushing, for 1/8” ears, each
$2.39
PLT120650
Eccentric bushing, for 1/4” hardened ears,
each
$5.95
PLT120660
Eccentric bushing, for hex style ears, each
$3.79
PLT120661
Hex step bushing, each
$1.69
PLT120750
T-handle, painted green, each
$8.95
PLT120753
T-handle, painted black, each
$8.95
PLT120751
Spring, each
$5.79
Product ID
Description
PLT120618
Rebuild Kit, White 6000 Series. Kit includes
new bolt-on arms, eccentric bushings, hex
bushings and hardware.
White 6000 Series Rebuild Kit
Price
$25.00
White 6000
Series Bracket
Note: Bolts to install bracket on planter and closing wheels are not included
Rebuild Your OEM Closing
Wheel Bracket
Rebuilt John Deere
7200, 7300 Bracket
S.I. Distributing offers a service to rebuild existing
John Deere V-Closing wheel brackets. The old
worn-out ears are cut off and new hex style ears
are welded on while in a jig to insure proper
alignment. Includes hex step bushings and new
eccentric bushings.
Rebuilt John Deere
Cast Bracket
Closing Wheel Bracket Rebuild Service
Product ID
Description
PLT120610
Rebuild John Deere 7200, 7300 closing wheel bracket
$29.95
Price
PLT120630
Rebuild John Deere 1700 Series cast closing wheel bracket
$29.95
PLT120640
Rebuild Kinze closing wheel bracket with bolt-on closing wheels
$29.95
Closing wheel bracket is sent to S.I. Distributing where the old worn-out ears are cut off and new hex style ears are welded on while
in a jig to insure proper alignment. Price includes new eccentric bushings, hex step bushings and repainting.
800.368.7773
Cast-Iron
Closing Wheels
Successful No Till Planting Depends On The Closing Of The Seed Trench
The problem:
Seed coverage is the biggest problem in no till planting. It is not unusual to see
12” in Diameter no-till corn laying in an open seed trench only to germinate if and when rain
occurs to help put soil around the seed. Since there is no loose soil to speak of and
the ground tends to be more moist in no-till, the seed trench doesn’t close behind the opener. Many
researchers have suggested the double, angled-type of press wheels as the best all-around answer to
the seed coverage problem. Cast Iron Angled Closing Wheels that squeeze the seed trench together are
definitely superior to the standard type, especially in reduced tillage. The extra weight of the cast iron
and the narrow rolling edge (obtainable only by a solid cast wheel) squeeze the seed trench together
for good soil to seed contact.
The solution:
Cast Iron Closing Wheels
PLT110000
PLT110010
PLT110020
Price
Cast iron closing wheel, John Deere 7000, 7100; Kinze 1993 & prior,
each
Water pump style bearing
Cast iron closing wheel, John Deere 7200, 7300, 1700 series, each
Bearing ID = 16.95mm
Cast iron closing wheel, John Deere 1700 series, Kinze 1994 & newer,
White 6000, 8000 series, each
Bearing ID = 5/8”
$57.00
$57.00
$57.00
Cast Iron Closing Wheel Replacement Parts
PLT110001
PLT110011
PLT110022
PLT110021
PLT110002
Price
Bearing, for John Deere 7000, 7100; Kinze 1993 & prior, each
Water pump style bearing; one bearing per wheel
Bearing, outside, for John Deere 7200, 7300, 1700 series, each
Bearing ID = 16.95mm; one outside & one inside bearing per wheel
Bearing, inside, for John Deere 7200, 7300, 1700 series, each
Bearing ID = 16.95mm; one outside & one inside bearing per wheel
Bearing, for Kinze 1994 & newer, White 6000, 8000 series, each
Bearing ID = 5/8”; two bearings per wheel
Snap ring, for John Deere 7000, 7100; Kinze 1993 & prior, each
CLOSE-N-TILL
CAST WHEELS
$16.00
$7.50
$10.95
$9.25
$1.00
Pushing the Seed Trench Together
• Better plant emergence
• More even plant population
• Helps retain valuable moisture for faster
germination
• Can be used in conventional tillage with proper
spring tension
• Wheels are made to interchange easily with
original press wheels on Max-Emerge, Kinze,
New Idea and Yetter planters
• The precision sealed bearing can be easily
changed with removable snap ring
• The wheel is made of rugged, thick, cast iron
• Weigh 45 pounds per row
• One year workmanship guarantee on unit
Comparison Weight of Closing Wheels (each)
Rubber Wheel.......................................... 3.5 lbs.
13” Martin Spike Wheel......................12.0 lbs.
15” Martin Spike Wheel......................14.5 lbs.
Finger-Till Wheel...................................16.2 lbs.
Close-N-Till Wheel................................17.3 lbs.
Regular Cast Iron Wheel.....................23.0 lbs.
Finger-till CAST
WHEELS
Wheel Diameter: 13”
Material: Ductile iron
•
•
•
•
•
•
Advantages vs. regular cast wheels
• Lighter weight
• Less compaction
• Fins will break up clods and fine up the topsoil
• Better in dry, no-till conditions
More aggressive
Reduces sidewall compaction
Lightly tills the soil
Faster seed emergence
15” in diameter
Better in wet, no-till conditions
Finger-Till Cast Wheels
Close-N-Till Cast Wheels
PLT110030
PLT110040
PLT110050
Close-N-Till Wheel, 5/8” bearing, for John Deere 1700
series, Kinze 1994 & newer, White 6000, 8000 series
planters that use 5/8” bolt to attach closing wheels.
Close-N-Till Wheel, 17mm bearing, for John Deere 7200,
7300, 1700 series planter with a 16.95 mm threaded
spindle on closing wheel frame.
Close-N-Till Wheel, water pump bearing, for John Deere
7000, 7100 series, Kinze 1993 & prior planters where
closing wheels are attached with roll pin.
Price
PLT110060
$72.00
PLT110070
$72.00
PLT110080
$72.00
Price
Close-N-Till Wheel, 5/8” bearing, for John Deere 1700
series, Kinze 1994 & newer, White 6000, 8000 series
$90.00
planters that use 5/8” bolt to attach closing wheels.
Close-N-Till Wheel, 17mm bearing, for John Deere
7200, 7300, 1700 series planter with a 16.95 mm
$90.00
threaded spindle on closing wheel frame.
Close-N-Till Wheel, water pump bearing, for John Deere
7000, 7100 series, Kinze 1993 & prior planters where
$90.00
closing wheels are attached with roll pin.
www.sidist.com
25
Air Design
Planter Scrapers
The AIR DESIGN scrapers feature an extremely simple design with a special tungsten carbide
edge. The tungsten carbide provides outstanding abrasion resistance along with toughness to
give superior, long-lasting performance and reduces the need for replacement.
Air Design Planter Scrapers
Product ID
Description
Price
ADC210670
Scraper kit, outside, John Deere 7000, 7100, Kinze
Includes 2 scrapers, 2 arms and 1 spring.
No modifications or holes to drill.
Scraper kit, outside, John Deere 7200, 7300, 1700-30, 1750-80
Includes 2 scrapers. Reuse original John Deere arms and spring.
No modifications required.
Scraper kit, outside, White 6000, 8000 series
Includes 2 scrapers, 2 adapter plates and 2 shims.
Reuse original White arms.
Scraper kit, outside, Case-IH 800, 900 series
Includes 2 scrapers.
Reuse original Case-IH arms and rivets.
Scraper kit, inside, Case-IH 955, 1200, left leading disc
ADC210680
Scraper kit, inside, Case-IH 955, 1200, right leading disc
$22.95
ADC210700
Scraper kit, inside, John Deere 7200, 7300, 1700 series
$31.95
ADC210500
ADC210510
ADC210530
ADC210560
$33.75
$22.95
$24.95
$28.95
$22.95
• Aggressive cleaning
action
• Enhances seed depth
placement accuracy
• Easy to install
• No drilling or other
hardware required
Tungsten carbide edge will outlast OEM steel scrapers by a factor of 100 to 1.
Air Design Drill Scrapers
Save time, labor and money. The Air Design scraper will outlast and outwear standard cast
scrapers and they can’t flip over and fall off. The scraper features a special tungsten carbide
cutting edge. You’ll get superior performance and reduce tedious replacement time.
Includes hardware for installation.
Air Design Drill Scrapers
Product ID
Description
ADC210601
Scraper kit, John Deere 1890, 1895, right disc
Price
$38.95
ADC210602
Scraper kit, John Deere 1890, 1895, left disc
$38.95
ADC210750
Scraper kit, Krause, all
$22.95
ADC210801
Scraper kit, Case-IH SDX, right disc
$38.95
ADC210802
Scraper kit, Case-IH SDX, left disc
$38.95
ADC210950
Scrapter kit, Great Plains 00HD opener
$24.95
ADC700000
Scraper kit, Case-IH 620, 6200
$18.50
ADC700200
Scraper kit, Case-IH 5400, 5500, left leading disc
$13.95
ADC700300
Scraper kit, Case-IH 5400, 5500, right leading disc
$13.95
ADC800000
Scraper kit, John Deere 455, 730, 1060, 8300, 9350
$18.50
Tungsten carbide edge will outlast OEM steel scrapers by a factor of 100 to 1.
Acre Plus Seed Box Topper
• OEM color matched plastic construction
• Plastic mold injection process insures better fit with one-piece snap-on design
• No modification to original seed box, use existing seed box lid
• Adds one bushel to seed box capacity - Plant more acres between fills
• Fit John Deere 7200, 7300 (1995 and newer), & John Deere 1700 series poly boxes
• Fit Kinze 3000 series poly boxes (2001 and newer)
• Not recommended for fiberglass constructed boxes
• Adds 7-1/4” to height of planter seed box
Kinze
Product ID
Description
PDM030000
Acre Plus, John Deere 7200, 7300 poly boxes (1995 & newer), 1700 series
$29.95
PDM031000
Acre Plus, Kinze 3000 series poly boxes (2001 & newer)
$29.95
800.368.7773
Price
John Deere
Sure Mark Marker Weight
Marker Weight For No-Till
SURE MARK is a 12-1/2 pound weight that simply bolts on the dish of your marker
disk. The additional weight of SURE MARK will assist the disk to cut a much deeper
furrow in No-Till planting. For extremely hard No-Till conditions, another weight
can be added.
Description
Price
Sure Mark
Please specify make, model and hub bolt pattern when ordering.
$29.95
When placing an order please measure the hub bolt pattern from center-to-center
of each bolt and the distance that the hub extends beyond the marker blade.
Longer bolts for installation are not included.
GAUge Wheel Cover
For John Deere, Kinze and White Planters
• Prevents rocks from bending planter units and twisting depth control arms
• Reduces bending and breaking of depth gauge wheels
• Helps prevent plugging of rocks and residue between depth gauge wheel and
planter drive wheel
• Made of heavy gauge steel
• Includes all mounting hardware
Product ID
Description
Price
PLT130500
Gauge wheel cover, each
$12.95
Trash Guard
• Keeps your planter V-Closing wheels free of old stalks, lumps of soil and other
field debris
• Improves planting results
• Saves time and money on maintenance
• For all John Deere, Kinze and White planters
• Bolts easily between the closing wheels
• Includes installation hardware
Product ID
Description
Price
PLT126000
Trash guard kit, John Deere, Kinze and White planters
$9.95
www.sidist.com
27
Down Pressure Spring Package
This Package Equals or Exceeds Competitive Designs
in Down Force in the Normal Working Range.
• Variable settings
• Maximum down pressure up to 700 lbs.
• Will fit all Kinze and John Deere planters with steel (not cast) parallel
linkage arms providing there is enough room on the inside of the arms
• On John Deere 7200, 7300 row units, the holes in the parallel linkage
arms will need to be enlarged.
Down Pressure Spring Kit
Price
PLT141000
Down pressure spring kit, per row
$75.00
PLT141001
Down pressure spring kit with plate, per row
Note: The spring kit with plate is for planter row units that
currently do not have a plate installed to hold the u-bolts
square and keep the parallel linkage from twisting.
$95.00
Each package includes:
Down Pressure Spring Kit Components
Price
PLT141010
Detent pin, 4 per kit, each
$3.89
PLT141011
Anchor, 4 per kit, each
$9.75
PLT141012
Spring, 4 per kit, each
$5.95
4 - Detent pins
4 - Anchors
4 - Heavy duty down pressure springs
Parallel Linkage Rebuild Kits
For John Deere 7000, 7100 and Kinze Planters
Benefits include:
• Replaces worn bushings in parallel linkage for John Deere 7000, 7100 and Kinze
Planters
• Oversized bushings last up to four times longer
• Special designed bolts have a shoulder so the bushings don’t wear on the bolt
threads
• No need to replace parallel linkage because holes are enlarged to accept the
new bushings
• Insures a precise fit to eliminate movement between the bushing and the bolt
• For John Deere 7000, 7100 and Kinze planters must drill out parallel linkage to 1-3/32”.
• For John Deere 7200, 7300, 1700 series planters no drilling is required. Kit includes same
size bushing as original.
Parallel Linkage Rebuild Kit
Product ID
Description
PLT130100
Parallel linkage rebuild kit, per row
Note: Will not work with parallel linkage mounted attachments
Price
Product ID
Description
Price
PLT130101
PLT130102
PLT130103
PLT130104
Bushing, 8 per kit, each
Bolt, 5/8” x 1-3/4”, 6 per kit, each
Bolt, 5/8” x 2-1/4”, 2 per kit, each
Nut, 5/8” lock, 8 per kit, each
$1.95
$1.90
$2.10
$0.40
$29.95
Parallel Linkage Rebuild Kit Components
800.368.7773
Kit includes:
• 8 oversized bushings
• 8 special shouldered grade 5 bolts
• 8 grade 5 locknuts
M3 Monitor System
Population Monitor for Planters and Grain Drills
The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. Using an Intel® microprocessor the M3
monitors speed, area, population, hopper levels, limit switch status, seed spacing, and row failure to keep the operator informed of the current
status of the planter or drill.
The M3 has two separate sets of setup parameters that may be entered and retained, eliminating the need to re-enter values when switching
planters or drills. Every feature of the M3 has been designed to be as simple to operate as possible, thereby eliminating confusion and
unnecessary down time in the field.
Each Kits Includes:
• M3 Monitor Console
• Power Cable
• Cab Harness
• Planter or Grain Drill
Harness
• DICKEY-john® HighRate Seed Sensors
• New Seed Tubes for
Planters
• Seed Tube Adapters for
Drills (if required)
• Instruction Manual
M3 Monitor Drill Kits
Product ID
Description
AGT30040102
AGT30040202
AGT30040302
AGT30040402
AGT30060102
AGT30060302
AGT30080102
AGT30080302
AGT30080402
AGT30120102
AGT30160202
AGT30160203
M3 Kit, 4-row drill, rigid, 10-20’
M3 Kit, 4-row drill, folding, 20-25’
M3 Kit, 4-row drill, folding, 30’
M3 Kit, 4-row drill, tandem, 10-15’
M3 Kit, 6-row drill, 3-fold, 30’
M3 Kit, 8-row drill, front fold, 30’
M3 Kit, 8-row drill, tandem, 10-15’
M3 Kit, 16-row drill, folding, 20-25’
M3 Kit, 16-row drill, folding, 30’
Price
Product ID
Description
AGT30045051
AGT30045052
AGT30065051
AGT30065052
AGT30085051
AGT30085052
AGT30085251
AGT30085252
AGT30085351
AGT30085352
AGT30125051
AGT30125052
AGT30125251
AGT30125252
AGT30125351
AGT30125352
AGT30165051
AGT30165052
AGT30165251
AGT30165252
AGT30165351
AGT30165352
M3 Kit, 4-row planter, rigid, John Deere 7000, 7100, Kinze
M3 Kit, 4-row planter, rigid, John Deere 7200, 7300, 1700 series
M3 Kit, 8-row planter, rear fold, John Deere 7000, 7100, Kinze
M3 Kit, 8-row planter, rear fold, John Deere 7200, 7300, 1700 series
M3 Kit, 8-row planter, front fold, John Deere 7000, 7100, Kinze
M3 Kit, 8-row planter, front fold, John Deere 7200, 7300, 1700 series
Product ID
Description
AGT10003389
AGT10003795
AGT10005800
AGT10006552
AGT10006518
AGT10006525
AGT10009000
AGT1050300001
AGT1050300002
MTS901425
MTS901413
Sensor, drill, Dickey-john, high-rate
Power cable, M3 monitor, 18’
Cab cable, M3 monitor, Computer-Trak pinout, 12’
Adapter kit, John Deere drill seed tubes
Limit switch kit (disables acre counter when implement is raised)
Gear tooth sensor kit, for RPM or ground speed sensing
Cab cable, M3 monitor, DICKEY-john pinout, 12’
M3 console, includes DICKEY-john cab cable
M3 console, includes Computer-Trak cab cable
Astro 5 GPS Speed Sensor, 5Hz update rate
Astro II GPS Speed Sensor, 1Hz update rate
$1,209.00
$1,375.00
$1,430.00
$1,485.00
$1,650.00
$1,650.00
$1,925.00
$2,035.00
$2,035.00
$2,475.00
$3,135.00
$3,135.00
M3 Monitor Planter Kits
Price
M3 Monitor Accessories
$1,375.00
$1,375.00
$1,650.00
$1,650.00
$1,925.00
$1,925.00
$2,035.00
$2,035.00
$2,035.00
$2,035.00
$2,475.00
$2,475.00
$2,585.00
$2,585.00
$2,585.00
$2,585.00
$3,025.00
$3,025.00
$3,135.00
$3,135.00
$3,135.00
$3,135.00
Price
www.sidist.com
$91.00
$28.00
$85.00
$20.00
$90.00
$120.00
$85.00
$925.00
$925.00
$453.00
$336.00
29
Trail-Jet Fertilizer Opener
Applies Liquid Fertilizer Behind the Planter
•
•
•
•
•
•
•
•
•
Frees up the front of the planter for other attachments
Allows for split applications of two different types of fertilizer
No sideways movement of residue
High pressure assures excellent placement of fertilizer
Mounts directly on the planter unit – no extra tool bars required
Low maintenance and low draft
13” double-beveled coulter blade
Applies fertilizer approximately 3” to either side of the row
Trail-Jet requires a constant pressure pump; not a squeeze pump
Trail-Jet Fertilizer Opener
Product ID
Description
TJT001000
Trail-Jet, Monosem units
$259.00
TJT001200
Trail-Jet, Case-IH 1200 series; Will not fit 1220
$249.00
TJT003000
Trail-Jet, Kinze 3000 series
$249.00
TJT006000
Trail-Jet, White 6000 series
$249.00
TJT007000
Trail-Jet, John Deere 7000, 7100 series, Kinze 2000 series
$235.00
TJT007200
Trail-Jet, John Deere 7200, 7300, 1700 series with MaxEmerge 2 row units
$235.00
TJT007500
Trail-Jet, John Deere 1700 series with MaxEmerge Plus row units
$249.00
TJT007600
Trail-Jet, John Deere 1700 series with MaxEmerge XP row units
$251.00
TJT007700
Trail-Jet, John Deere 1700 series with Pro-Series XP row units
$251.00
TJT008000
Trail-Jet, Case-IH 800, 900 series
$269.00
Trail-Jet, White 8000 series
$249.00
TJT008100
Price
Note: Price is per row and does not include pump or hoses. Nozzles are sold separately.
Trail-Jet Nozzles
Product ID
Description
Price
TJT830002
Stainless steel nozzle, 5 gallons per acre
$15.15
TJT830003
$15.15
TJT830004
$15.15
TJT830005
$15.15
TJT830006
$15.15
TJT830008
$15.15
TJT830010
$15.15
Available For:
John Deere Series
7000-7300
1700
Kinze Series
2000
3000
Case-IH Series
800
900
1200
White Series
6000
8000
Insecticide Skirt
PDM050000
Price
Insecticide skirt
800.368.7773
$5.50
• Designed to keep insecticide
in place during windy planting
conditions
• Soft flexible material will not affect
flow pattern of insecticide
• Uses existing hardware to mount to
bander
• Available for Kinze, John Deere, and
models using insecticide bander as
shown in picture
SHIELD AG DRILL DISCS
Extreme Conditions Drill Discs
These Extreme Conditions Discs are more than 17% thicker to last longer in dry and
abrasive conditions, and they are more than 36% stronger to resist breakage in the
toughest ground. These drill discs are made from high quality chrome-boron steel for
toughness and improved ability to penetrate, scour and self-clean.
• Extreme conditions discs are made of earth-metal, chrome-boron steel
• Built for toughness; improved ability to penetrate, scour and self-clean
• Available as blade only, single disc assembly and boxed sets of two disc assemblies
• 205 series bearing with triple-lip seals on both sides
• 3.5mm blades are 17% thicker than 3.0mm OEM blades
• Last longer in dry and abrasive conditions
• 36% stronger to resist breakage in the toughest ground
ShieldAg Drill Discs
OEM ID
APL135050
Drill disc assembly, Great Plains
All 13-1/2 double disc opener drills
APL135051
APL135052
APL135053
APL150050
HD, 15 & 25 series drills
Yield Pro planters
107-130S
107-133S
107-135S
107-138S
Diam. Bearing
Dust Shims Smooth Notched Qty.
Thick. Cover
13.5”
205, 5/8”
3.5mm
13.5”
205, 5/8”
3.5mm
13.5”
205, 5/8”
3.5mm
13.5”
205, 5/8”
3.5mm
15”
205, 5/8”
4mm
15”
205, 5/8”
4mm
2
2
6
Price
x
1
$33.00
x
2
$76.75
x
1
$36.00
x
2
$83.00
x
1
$43.00
x
2
$90.00
6
404-072S
404-121S
APL150051
HD, 15 & 25 series drills
Yield Pro planters
APL135000
Drill disc blade, John Deere
450, 455, 515 520, 1520, 8100, 8200,
8250, 8300, 8350, 8500, 8550, 9400, 9450
conventional drills;
730, 770, 780, 1060 air seeders
N164594
N283805
13.5”
none
3.5mm
x
1
$18.00
APL180000
Drill disc blade, John Deere
750, 1560, 1590, 1690, 1850, 1860, 1890,
1895, 1990
Note: This is a double beveled blade that
improves penetration.
N214190
N283804
18”
none
5mm
x
1
$44.00
APL135050
APL135052
APL150050
2
6
APL135000
APL180000
www.sidist.com
31
NEEDHAM AG
V8 Firming Wheel
Needham Ag Technologies, LLC
Designed a New and Improved
Seed Firming Wheel Called V8.
DRL400001
Price
Needham AG V8 firming wheel,
John Deere drill
$39.95
Features:
• John Deere’s single disc opener creates a seed
Needham Ag V8 wheel installed
on John Deere drill
slot that is almost vertical on the disc side with an
angled sidewall on the opposite boot side
• John Deere’s firming wheel is too wide to fit down
into the angled seed slot, especially in noFirming Wheels Compared
till conditions
Maximum
Tire
• Needham Ag V8 firming wheel is designed
Wheel
Width
Design
to closely match the profile of the seed slot
Information
(Inches)
Profile
• Needham Ag V8 firming wheel pushes the
John Deere
seed into the bottom of the seed slot for
Part Number
0.982
uniform access to soil moisture
AN281359
• Needham Ag V8 firming wheel promotes
John Deere
more even seed emergence, even in low
Part Number
0.831
soil moisture conditions
AN282296
• Needham Ag V8 firming wheel incorporates
Needham Ag
a 5203 bearing for longer service life
V8
0.596
• Needham Ag V8 firming wheel includes
Firming Wheel
mounting bolt, lock nut, spacer and
installation instructions
• Fit John Deere 750, 752, 1560, 1590, 1850, 1860,
1890 and rear 2 gangs on 1895
Needham Ag V8
wheel is down
within the seed slot
Durometer
(compound
hardness)
Wheel Design
Characteristics
Ability to
Flex Within
Seed Slot
82
Rubber tire with 2
steel wheel halves
No
80
Rubber tire with
2 plastic wheel
halves
No
95
Flexible rubber
wheel design with
tapered shape to
match seed slot
Yes
NH3 DISC SEALERS
• Start applying anhydrous and 28% fertilizer when crop is smaller.
• Drive faster without covering corn.
• Moves ground where knife ran for better sealing.
• Prevents loss of anhydrous and 28% fertilizer.
• Prevents the possibility of open slots in dry conditions.
• Purchasing without discs and using your planter’s worn seed discs makes it
economical.
• Independent arms reduce clogging and dragging of residue.
• Powder coat painted frames.
• No springs; simple and low maintenance.
• Only needs greased every 200-300 acres and before storing for the season.
NH3 Disc Sealers
Product ID
Description
GRB100000
Disc Sealer, straight shank, 2” wide
$199.00
GRB200000
Disc Sealer, straight shank, 1” wide
$199.00
GRB300000
Disc Sealer, coiled shank
$199.00
800.368.7773
Price
John Deere 1”
firming wheel is too
wide to fit down
within the seed slot
www.needhamag.com
Keeton Seed FirmerS
Uneven seed germination and uneven plant emergence sap yields. Plants
coming up even a little late can’t compete with their neighbors for resources and
at pollination they’re vulnerable to heat stress and insects. Keeton Seed Firmers
set the seed at the right depth and create consistent seed-to-soil contact. That
leads to uniform germination, uniform emergence, and tests show, an average
increase of six bushels per acre.
Firmer contact leads to
uniform emergence leads to
1,000 more ears per acre.
• Set seeds to the bottom of the seed trench • Ensures uniform seed germination
• Hit the depth you set on your planter
• Ensures uniform plant emergence
• Ensures uniform seed-to-soil contact
• Research proves an average six
bushel increase in corn yield
Keeton Planter Replacement Parts
KTN900002
KTN900003
Tie strap, white
$0.17
Splitter insert
Tubing, clear, 3/8” diameter x
KTN900017
2” long splice
Tubing, red, 1/4” diameter,
KTN900024
per foot
Screw, 1/4-10 x 1-1/4, hex
HDW210245 head slotted; for seed tube
mount Keetons
Screw, 1/4-20 x 1-3/4, hex
HDW210253 head slotted; for bracket
mount Keetons
Screw, 1/4-10 x 1-3/4, hex head
HDW210246 slotted; for seed tube mount
Keetons with Mojo Wire
$0.80
KTN111501
KTN131500
KTN125011
KTN115013
KTN126010
KTN121006
KTN900000
KTN900001
Seed Tube Mount
Case-IH Seed Boot Mount
Price
Bracket, Kinze Gold, with
hardware
Bracket, Universal, with
hardware
WaveVision Firmer Tail, dry
tail only, fits in Universal or
Kinze bracket
WaveVision Firmer Tail,
dual tube tail only, fits in
Universal or Kinze bracket
WaveVision Firmer Tail, short
low profile tail only, fits in
WaveVision Firmer Tail, long
low profile tail only, fits in
Tubing, blue, 1/4” diameter,
per foot
Hose clamp, for seed tube
mount firmers
Tie strap, black
$9.00
$9.00
$34.50
$34.50
$34.50
$34.50
$0.40
$1.00
$0.17
KTN900004
Universal Bracket Mount
Kinze (Gold) Bracket Mount
$0.16
$0.40
$0.35
$0.35
$1.63
Keeton Planter Replacement Tails
Standard Dry Tail
Standard Liquid Tail
Short Low Profile Tail
Long Low Profile Tail
Standard tail with no liquid
application tube. Use in
non-sticky soils with all tillage
systems. Works with Wave
Vision seed tube.
Standard tail with liquid
application over seed and split
to the side walls of the seed
trench. Use in non-sticky soils
with all tillage systems. Works
with Wave Vision seed tube.
Low Profile Tail with splitter for
liquid application. Use in sticky
soil types and/or minimum tillage
environments. Works with Wave
Vision seed tube.
*Do not use low profile tails in
sandy soil types.
Product ID
Price
Product ID
Price
Product ID
Price
Product ID
Price
KTN125011
$34.50
KTN115013
$34.50
KTN126010
$34.50
KTN121006
$34.50
Low Profile Tail with liquid over
the seed only (dry application
recommended). Does not
include splitter. Use in sticky soil
types and/or minimum tillage
environments. Works with Wave
Vision seed tube.
*Do not use low profile tails in
sandy soil types.
www.sidist.com
33
Keeton Seed FirmerS
Keeton Seed Firmer Planter Application Guide
Make
Models
Installation
Options
Case-IH
400, 500
800, 900
5400, 5500
Seed Boot Mount
Mounts to seed boot.
Also fits 5400 and 5500 Soybean Special drills
Will NOT fit seed boot #82443285
Great Plains
Yield-Pro
Seed Tube Mount
Mounts to seed tube.
John Deere
Kinze
Monosem
White
7000
7100
7200
7300
1700 Series
1530 Drill
1535 Drill
2000 Series
3000 Series
All
5000 Series
6000 Series
8000 Series
Universal Bracket
Fits Wave Vision
Kinze (Gold) Bracket
Fits Wave Vision
Notes
Tail Options
Product ID
Price
Short low profile tail
(liquid not available)
KTN101004
$30.50
Standard dry tail
KTN101000
$31.50
Standard liquid tail
KTN101001
$32.50
Standard dry tail
KTN125012
$37.00
KTN115011
$37.00
KTN126008
$37.00
Long low profile tail
KTN121004
$37.00
Standard dry tail
KTN125013
$37.00
KTN115012
$37.00
KTN126009
$37.00
KTN121005
$37.00
Standard dry tail
KTN101000
$31.50
KTN101001
$32.50
Standard dry tail
KTN125012
$37.00
KTN115011
$37.00
KTN126008
$37.00
KTN121004
$37.00
Standard dry tail
KTN125013
$37.00
KTN115012
$37.00
KTN126009
$37.00
KTN121005
$37.00
Standard dry tail
KTN101000
$31.50
KTN101001
$32.50
Standard dry tail
KTN101000
$31.50
KTN101001
$32.50
Standard dry tail
KTN125012
$37.00
KTN115011
$37.00
KTN126008
$37.00
KTN121004
$37.00
Standard dry tail
KTN101000
$31.50
KTN101001
$32.50
Bracket mounts to seed disk opener shafts and around
row unit shank.
Mounts inside row unit between scrapers.
Will NOT work with spring loaded disk scrapers.
Will NOT fit 7200, 7300 or 1700.
Seed Tube Mount
Mounts to seed tube. Also fits 1530, 1535 drills.
Universal Bracket
Fits Wave Vision
Bracket mounts to seed disk opener shafts and around
row unit shank.
Will NOT fit EdgeVac planters
Will NOT fit 2013 mechanical meter planters
Kinze (Gold) Bracket
Fits Wave Vision
Mounts inside row unit between scrapers. Will not work
with spring loaded disk scrapers. EdgeVac and 2013
mechanical meter planters requires drilling 2 holes.
Seed Tube Mount
Will NOT fit EdgeVac
Will NOT fit 2013 mechanical meter planters
Seed Tube Mount
Universal Bracket
Fits Wave Vision
Bracket mounts to seed disk opener shafts.
Bracket modification is required.
Will NOT fit 5000 series.
Seed Tube Mount
800.368.7773
Keeton Seed FirmerS
Get the money-making advantages of Keeton Seed Firmers for your drill, too. New field trials show that Firmers make you money in
three ways:
• Reduced seed costs. Improved germination means you get better stands with fewer seeds. On average, tests show a 9.4% increase in soybean
germination. That translates to typical seed savings of about $2 per acre.
• Increased soybean yields. Field tests show an average yield increase of over 7%.
• Lower equipment and labor costs. Apply liquids as you plant with Keeton’s integrated liquid applicator tubes.
Seed savings alone will pay for the Keeton Seed Firmers during the first year. Then you’ll profit year after year from the additional yield. Keeton
Seed Firmers make a dramatic difference on shallow planted seeds like soybeans. Firming seeds into moisture and improving seed-to-soil
contact improves germination. So you can reduce seeding rates of expensive seeds while maintaining productive stands.
Keeton Seed Firmer Drill Application Guide
Make
Models
Installation
Options
Crustbuster
3700, 3800
3400 w/o parallel arms
Metal Bracket
Mounts on scraper bracket.
Will not fit 3400 All-Plant or 3400 Min-Till openers.
KTN210002
$30.50
Crustbuster
3400 Series
4000 Series
Metal Bracket
Mounts to scraper support rod.
Fits All-Plant & Min-Till openers.
KTN210004
$30.50
Case-IH
5100
5400
Metal Bracket
Mounts to scraper housing.
KTN210006
$29.50
Great Plains
Fluted Metering Wheel Drills:
00, 05, 06, 07, 10 Series; 20
Metal Bracket
Series (-2003)
Mounts to scraper bracket.
KTN210008
$29.50
Great Plains
Precision Drills (singulating &
volumetric metering wheel): Metal Bracket
10, 20 Series
KTN210010
$29.50
Great Plains
15, 25 Series Planter Style
Row Units and HD10 Series
Row Units
Metal Bracket
KTN210027
$29.50
Great Plains
All 00HD Series Row Units
Metal Bracket
KTN210028
$29.50
John Deere
1560, 1860
1590, 1890
1690, 1990
Metal Bracket
Mounts to back of t-handle slotted bracket.
KTN210012
$35.50
John Deere
450, 455
520, 1520
Metal Bracket
Mounts to seed disk scraper.
KTN210014
$29.50
John Deere
750, 1850
Metal Bracket
KTN210016
$35.50
Krause
Most
Metal Bracket
Mounts to fertilizer opener.
Will not fit 5200 and 5400.
KTN210018
$30.50
Marliss
Most
Metal Bracket
Mounts to seed disk opener.
Will not fit 2038.
KTN210020
$30.50
Tye
All
Metal Bracket
KTN210023
$30.50
Sunflower
9411, 9412, 9421
Metal Bracket
Mounts to back of disk opener casting.
Modified dry tail
KTN210024
$30.50
Notes
Tail Options
Product ID
Price
Metal Bracket
• Mounting brackets and instructions are included.
• Drill firmers are only available with liquid tails.
• For non-liquid use simply remove the tube from the tail.
Keeton Drill Replacement Parts
Product ID
Product Description
KTN210054
Tail, drill, standard liquid
Price
$27.50
KTN210025
Tail, Sunflower drill, modified dry tail
$30.50
KTN210055
Tail, drill, narrow liquid
(Recommended for Great Plains Yield Pro planters.)
$27.50
KTN900000
Tubing, blue, 1/4” diameter, per foot
$0.40
KTN900017
Tubing, clear, 3/8” diameter x 2” long splice
$0.16
Standard Liquid Drill Tail
www.sidist.com
35
SPRING COMPRESSION SPACERS
For John Deere Single Disc Seeders
Individual row unit down pressure is available on the Case SDX series and
this feature is particularly useful when setting up their no-till drills. Often the
amount of down pressure required to penetrate the soil is higher behind
tractor and mid-cart wheel tracks, so additional force can be added to these
individual units using the pin hole configuration illustrated in the left photo.
In the past, operators of John Deere single disc seeders have not had the luxury of this adjustment and frequently the amount of down pressure in wheel tracks is not high enough
to ensure consistent soil engagement. If down pressure is elevated to achieve penetration within the
wheel tracks, then units not within previous wheel tracks usually have excessive down pressure. This is a
concern because it commonly results in sidewall compaction.
Needham Ag Technologies, LLC is proud to offer the new Spring
Product ID
Compression Spacers for John Deere single disc seeders. They are easDRL400100
ily installed within the compression spring housing by loosening the
DRL400200
tension on the bolt and installing the spacer. Depending on the width
of the seeder, the size of the tires on the cart and tractor and the row
spacing, 4-8 of these spacers may be required for a John Deere drill or seeder.
Each spacer provides around 70 lb of additional down force.
Product Description
Price
John Deere 750, 1850
John Deere 1560, 1590, 1860, 1890, 1895
$26.25
$26.25
john deere seed boots
John Deere Drill Seed Boots
DRL280446
Product ID
Product Description
DRL280446
DRL280447
DRL282788
DRL282789
DRL283432
DRL283433
Seed Boot, John Deere 750, 1850, right hand
Seed Boot, John Deere 750, 1850, left hand
Seed Boot, John Deere 1560, 1565, 1860, top right hand
Seed Boot, John Deere 1560, 1565, 1860, top left hand
Seed Boot, John Deere 1560, 1565, 1860, bottom right hand
Seed Boot, John Deere 1560, 1565, 1860, bottom left hand
Seed Boot, John Deere 1560, 1590, 1890, 1-piece right hand
For drills that have been converted to the 1-piece seed boot
Seed Boot, John Deere 1560, 1590, 1890, 1-piece left hand
For drills that have been converted to the 1-piece seed boot
DRL283730
DRL283731
DRL280447
DRL282788
DRL282789
800.368.7773
DRL283432
Price
DRL283433
DRL283730
$26.63
$26.63
$15.42
$15.42
$14.92
$14.92
$32.92
$32.92
DRL283731
Mojo Wire
In North America, most seeders were never really engineered to plant no-till. For instance, the original press wheels on
all planters (and so-called “no-till” drills) were designed for the loose, dry conditions found in tilled seedbeds—they were
intended to pack the soil from the surface all the way down to the seed, which was easily done in loose tilled soil. Substantial
packing was desirable to help the seed draw moisture from beneath, since the soil near the surface had dried with tillage.
In no-till, this concept is terribly flawed. No-till soils are resilient (structured) and don’t readily fall back into the furrow. Plus,
an enormous amount of pressure must be applied at the surface to do any seed firming at all down in the bottom of the
furrow. In no-till, to get even 5 lbs of pressure at seed depth might require 50 to 150 lbs. applied to the press wheel at the
surface, and even then it might not be enough and certainly won’t be consistent at seed depth. You are severely packing
the sidewalls and soil over the seed (thru which it must push) in attempting to do something down at the bottom of
the furrow. Why not just apply a precise amount of pressure exactly where it’s needed—at the bottom of the furrow?
In the early ’90s, this is exactly what the introduction of the Keeton seed firmer was supposed to do. However,
the Keetons applied only a few ounces to (at most) ~ 1.5 lbs of pressure on the business end of the Keeton.
In many cases, that wasn’t enough force. The situation is made worse by the fact that the nylon
material used to mold the Keetons loses its integrity (springiness) after awhile (apparently due to
absorbing moisture, ‘cold flowing,’ and UV degradation).
Why the Mojo Wire?
• 3x to 5x pressure of standard Keeton
• Ensures fast, uniform germination
• Large payback potential, especially in
resilient no-till soils
• Quick fix for limp, aging Keeton firmers
Product ID
KTN400100
KTN400200
KTN400211
HDW210246
To remedy the situation, Exapta introduced the Mojo Wire stiffener in 2006, which supplies
up to 5 times the pressure to the standard Keeton. In our testing and our customers’
experience, we’ve simply been amazed at how much better the germination consistency
was—both in terms of higher percentages of seeds emerging, and in uniformity of timing of
emergence.
Another noticeable improvement was in the self-cleaning action of the Keeton against the
furrow sidewalls. Adding the Mojo Wire has improved this self-cleaning action, at least in
low-disturbance no-till.
Product Description
Price
Mojo Wire, for Keeton seed tube mount
$22.00
Mojo Wire, for standard Keeton bracket mount
$19.00
Mojo Wire, for Wave Vision Keeton bracket mount
$19.00
Screw, 1/4-10 x 1-3/4, hex head slotted; for seed tube mount Keetons with Mojo Wire
$1.63
Note: One drawback to increasing the pressure
on the Keeton is that the tail wears more quickly.
If you put lots of acres on your planter in a
season, expect to completely wear out a set of
Keetons with the Mojo Wire installed.
Mojo Wires fit most planter Keetons. Will not fit low profile tails or drill Keetons.
Features Include:
• Leak Resistant Dual EPDM O-Rings
• Chemical Resistant Polypropylene
• NSF Standard 58 Certified
• 150 psi @ 70ºF
• 60 psi @ 140ºF
• For Use with Plastic or Soft Metal Tubing
Mur-lok® Fitting Installation Instructions
Mur-lok Fittings
Product ID
Product Description
KTN500000
Mur-Lok fitting, union, 1/4” to 1/4”
Price
$1.95
KTN500001
$2.66
KTN500002
$2.64
KTN500003
$3.58
KTN500004
$3.04
KTN500100
Mur-Lok fitting, divider, 1/4” to 1/4”
$3.07
KTN500101
Mur-Lok fitting, divider, 3/8” to 3/8”
$3.54
1. MAKE A CLEAN TUBE CUT
Cut the tube squarely and if using plastic tubing, ensure that the cut has not made
the tube out of round. Also ensure that the tube has a smooth outside diameter
without any burrs or score marks prior to inserting it into the fitting.
3. TEST AND INSPECT
2. INSERT TUBE INTO FITTING
TUBE REMOVAL
Push the tubing through the collet and dual o-rings until it bottoms out against
the tube stop. The collet holds the tube in place and the dual o-rings provide a leak
resistant seal.
Push and pull the tubing toward and away from the fitting to ensure that
it has been installed properly. Test & inspect for any leaks.
Relieve pressure from the tubing and
fitting. Push uniformly around the collet flange against the fitting body
while pulling the tubing away from the fitting to release it.
www.sidist.com
37
Acra-Plant
V-Slice Inserts
Acra-Plant specializes in No-Till & Min-Till planting and drilling equipment, fertilizer
application tools, and chisel plow tools. The current awareness and emphasis on NoTill and Min-Till agricultural practices emphasizes our full line of Acra-Plant Precision
Planting/Seeding Solutions.
The Acra-Plant® insert creates a uniform V-Slice below the sidewall compaction of
discs. The formed V-Shape contacts seed firmly on both sides . . . soil springs back . . .
catching and squeezes seed . . . locking it in place within the row as metered.
The Acra-Plant® insert enhances the planting performance of your planter. The
V-slice creates a uniform firm & moist seedbed. It allows even spacing and uniform
depth of each seed in the row.
Faster and more even germination of seed. Faster and more uniform emergence of
plants. Even competition between plants in row. Increased yield potential from each
plant and better overall yeilds.
Note: Not recommended for use in rocky conditions.
The Six Most Important Characteristics of A Proper Crop
Stand:
1. Fast germination
2. Uniform and fast emergence
3. Early root development
4. Uniform plant spacing in the row
5. Proper plant population
6. Correct leaf position
Acra-Plant V-Slice Inserts
Price
APL001685
V-Slice insert, White 6000-8000
series
$24.95
APL001785
V-Slice insert, Kinze 2000 series,
John Deere 7000-7300, 1700
series
$26.95
APL001885
V-Slice insert, Kinze 3000 series,
includes special socket-head cap
screws with Loctite
$39.95
APL001985
V-Slice insert, John Deere, XP row
unit series
$39.95
APL001772
Tube extension bracket, required
when a straight, instead of
curved, seed tube is used
$6.95
Acra-Plant Replacement V-Slice Inserts
Product ID
Description
APL410000
V-Slice insert, for APL100040
tandem blade opener (long
piece)
$48.95
APL410100
V-Slice insert, for APL009040,
APL100040 tandem blade opener
(short piece)
$42.95
APL410601
$45.95
APL410602
$45.95
Made of
Chrome-Alloy
For Longer Life.
800.368.7773
Price
Acra-Plant V-Slice Openers
Price
APL009040
V-9 opener, IHC 400-500 series
with offset discs
$169.95
APL009840
V-98 opener, Case-IH 800, 900,
1200 series
$131.95
APL034550
V-51 opener, White 5100, 5700
series
$139.95
No-Till Now with Acra-Plant
Notched Disc Openers
Acra-Plant Notched Disc Openers
Acra-Plant® Notched Disc Openers
• Strong disc design is 50% thicker chrome-moly alloy that sheds wet soil better and
keeps discs clear
• Stronger, heavy duty bearing and flange design
• Modified gothic arch bearing structure extends wear and runs straight and true
• Molded rubber hubcap stays in place
• Acra-Plant notched discs and inserts turn your present planter into the ultimate
narrow profile no-till system insert
• 11 & 15 notch discs aggressively slice through the toughest residue
• Package requires the Acra-Plant V-slice insert
Special Features of Acra-Plant No-Till/Min-Till Planter Notched Disc Opener Kit
1. The two disc blades in the set each have a different number of notches, 15 notches on
Convert your standard
one blade and 11 notches on the other. This assures that the blades will self-turn instead
planter to a No-Till machine
of skidding over old crop residue, and the blade notches overlap as they work together to
without increasing row unit
actually CUT the trash ahead of the V-slice opener system. This feature converts the planter
down-pressure and without
openers to a true NO-TILL operation that is equally suited for Minimum Till and Conservation
the high cost of residue
Tillage plans.
management systems or
2. The disc blades themselves are up to 50% thicker than the smooth OEM blades that they
coulters
replace. Combine that with the Chrome-Boron-Moly alloy, and you get a strength and
durability unmatched by other replacement blades. Cutting through heavy residue and trash
acre after acre requires tough, durable, and thick opener blades. Acra-Plant answers the call to duty with these blades.
3. Note that the opener discs feature a flat ground edge, rather than the cheaper alternative of hollow grinding the edge. Flat grinding a true
bevel allows the blades to self sharpen as they wear, rather than immediately going dull.
4. The bearings used in Acra-Plant opener discs are of the true Gothic Arch design. Gothic Arch 4-race bearings cost more, but they allow the
bearings to transmit radial load, axial thrust & overturning moments to a much greater extent than the cheaper twin-race ball bearings.
5. The alloy casting V-slice opener that actually produces the uniform seed trench is made of 25% chrome for longer life and durability.
Acra-Plant Notched Disc Openers
John Deere 7000-7300, 1700 Series, Kinze and White 6000-8000 Series
APL101711
APL101715
APL001760
Acra-Plant notched disc opener, 15”-11 notch
Bearing & flange repair kit, notched disc openers
Note: A firming point must be installed when using notched disc openers.
Case-IH 400, 500, 800, 900, 1200 Series and White 5100, 5700 Series
APL109811
APL109815
APL001760
Bearing & flange repair kit, notched disc openers
Note: A firming point must be installed when using notched disc openers.
Price
$87.95
$87.95
$46.95
Price
$88.95
$88.95
$46.95
Acra-Plant Notched Marker Discs
Price
APL430000
Acra-Plant 13” notched marker disc for John Deere 7000-7300, 1700 series, Kinze and Case-IH 800, 900
series (additional mounting bracket is required). Note: For John Deere prior to 1974, must purchase
AA27924 from a John Deere dealer.
APL430001
Marker bracket, Case-IH with folding markers and round shaft
$36.95
APL430002
Marker bracket, Case-IH with non-folding markers and flat plate
$41.95
www.sidist.com
$105.95
39
Acra-Plant
Fertilizer Knives
• Quick-Change
• Side Mount
• Acra-Plant replaceable point fertilizer knives outlast “throwaway” knives 3–5 times reducing downtime and saving money in the long run
• Chrome Carbide Points scour quickly to a high polish, slipping through the soil
and pulling easier than “throwaway” knives — you’ll save more fertilizer with the
unique self-sealing design
• Acra-Tuff Chrome Carbide alloy point continues to perform like new throughout its
life with no degradation of performance after just a few hundred acres
• Acra knives are designed for minimum surface disturbance — perfect for your NoTill cropping plan
• With a choice of three Acra-Tuff Chrome Carbide replacement points and many
NH3 and liquid tube options, you can tailor your fertilizer rig to match your
conditions and switch very easily if your crop rotation or nutrient plan changes
3/8˝ and 1/2˝ NH3 or liquid
tubes available in just about
any combination
High-strength steel shank is
punched to accept most
side-mount applicators
Acra-Plant Fertilizer Knives
APL700041
APL700042
APL700142
APL700043
APL700044
APL700010
Price
Fertilizer point, standard wing. The most widely used and effective in a wide variety
of soil types. Includes 3/8” x 1-3/8” spiral pin
Fertilizer point, super wing. Ideal for use in sandy soils that need to be loosened or
fractured to allow maximum penetration of fertilizer. Includes 3/8” x 1-3/8” spiral pin
Change worn inserts in
seconds with spring pin
$26.95
$31.95
$32.95
Strip till point, has a flat wedge point on bottom like a strip till knife
Fertilizer point, heavy duty super wing. Ideal for use in sandy soils that need to be
loosened or fractured to allow maximum penetration of fertilizer. Includes 3/8” x
1-3/8” spiral pin
Fertilizer point, super wing with closer. Designed for sandy or clay soils that are both
tough to open and tough to close. Incorporates a “Super Wing” as well as “Closing
Wing” to seal the fertilizer at the desired location. Includes 3/8” x 1-3/8” spiral pin
Shank with NH3 tube (.408 OD). Universal hole and slot to fit most applicators.
Remove spirol pin for quick point replacement. Dead air space insulates point to
prevent freeze-ups.
Three styles of Chrome
Carbide replacement
points available to match
your ground conditions
$31.95
$44.95
$42.95
Gas/liquid expel point is low, forward, and
protected by the Chrome Carbide point to
minimize freeze-up, plugging and tube
wear, even in dual application
APL700041
APL700042
APL700043
APL700044
APL700010
Acra-Plant Blu-Jet Parts
Made Of Chrome-Alloy For Longer Life
Product ID
Description
APL801300
V-crown ripper “Spring” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Narrow point is 2” wide and 14” long for deep tillage.
V-crown ripper “Fall” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Wider point is 2-7/8” wide and 15-1/2” long for deeper tillage
and more shattering action.
Shin guard, Blu-Jet Sub-Tiller II with 1-1/2” shank.
APL801400
APL801600
APL801300
Price
APL801400
$119.95
$149.95
$149.95
APL801600
Caution: S.I. Distributing Inc. warrants these products to be free of defects in material and workmanship. Liability under warranty shall extend to replacement or credit of product
found to be defective on examination by S.I. Distributing Inc. This warranty does not extend to misuse or damage by accident or negligence. Chrome castings are not guaranteed for
use in rocky, stony or frozen ground. S.I. Distributing Inc. will not honor any claim for warranty on chrome castings that have been altered or welded on in any way. S.I. Distributing
Inc. will not recognize any claims for consequential or incidental damages.
800.368.7773
Acra-Plant
Conservation Ripper Points
Features & Benefits:
Conservation Points are
now available in 2-1/2”
(no wing), 7” winged, &
10” winged for just about
any application!
• Relieves soil compaction zone for yield improvement
• Improves soil tilth to increase nutrient availability and root uptake
• Produces a subsoil profile that assures improved root penetration
• Assures moisture retention in the driest conditions
• Provides fracture and lift with little surface disruption or “slabbing”
• Allows flexibility in running depth
• Scours up, pulls easy and flows soil around the shank to reduce wear
• Provides long wear life in the widest variety of soil conditions
The CRP line of points is the
newest evolution of Subsoiler
& Ripper points designed by
combining Acra-Plant technology
with the years of experience
ShieldAg has in supplying longlasting high-performance Chrome
Carbide Ripper Points.
2-1/2”
7”
10”
CRP points are available with wings and without wings for inner row and spring fieldwork. The unique design allows for the use of solid 25%
chrome carbide in all the wear surfaces with mounting boots designed specifically for the most popular makes and models of disc rippers and
subsoilers.
Please call with make and model of ripper for pricing.
Acra-Plant QUICK-CHANGE
FERTILIZER KNIVES
For Chisel Plow Applicators
Features & Benefits
• Long-lasting Alloy replaceable points outwear ˝throwaway˝ chisel knives 3–5 times
• Continues to perform like new throughout its life, no degradation of performance after just a few
hundred acres
• Convert from fertilizer placement to standard chisel in just a few minutes by replacing the
APL708041 fertilizer point with the APL705141 chisel plow point
• Tube options available for nearly any NH3 or liquid application
Acra-Plant Chisel Plow Applicators
Key
1
Product ID
Description
APL708041
Chisel plow fertilizer point. Includes APL500657, 1/2” x 1-1/4” spiral pin
$19.95
Price
2
APL705141
Chisel plow tillage point. Reversible. Includes APL500657, 1/2” x 1-1/4” spiral pin.
$26.95
3
APL705011
Chisel plow shank
$25.95
4
APL708003
Adjusting wedge to change shank angle
$8.95
5
APL705029
Tube mounting kit
$12.95
6
APL705020
3/8” NH3 tube (.408” OD) crimped and drilled
$10.25
6
APL705021
3/8” liquid tube (.408” OD) open end
6
APL705022
$12.25
6
APL705023
1/2” liquid tube (.569” OD) open end
3/8” NH3 tube and clip rings for 1/2” plastic hose for dual application. Tube is crimped and drilled and clip
rings are welded on.
6
APL705024
1/2” NH3 tube (.569” OD) crimped and drilled
$12.95
$9.95
www.sidist.com
$24.95
41
Quick Finger
+
Broken Reel Finger
=
Quick Finger Installation
Repaired Reel Finger
in a Snap!
The Quick Finger will Fit the Following Pipe Reels:
AGCO
300, 400, 500, 700, 800 series heads
Case-IH
1010, 1020, 2020, series heads
Caterpillar
1998 and later
John Deere
900, 600 series heads
Massey Ferguson
9700, 9750, 9800, 9850 series heads
New Holland
971, 973, 71C, 73C, 72C, 74C series heads
Product ID
Description
Price
PDM020000
Quick Finger, 10-Pack
$15.50
• Quick repair
• Saves time and money
• Easy installation, no
tools required
• Cost effective vs. OEM
replacements
• Patented
Note: Will only fit Level II pipe reels with 6” tine spacing.
Plastic Wear Blocks
Long Lasting Self-Lubricating Plastic Chain Tightner and/or Wear Block with 9/16” Hole
• Decreases wood block replacement
• Reduces chain wear and friction
• Saves labor, money and downtime
• Increases chain life and keeps chain tight
• Lasts 4 To 5 times longer than wood blocks
• Replaces any idler on chain driven equipment
The Plastic Wear Block has characteristics that are very high in lubrication which
reduces chain wear. After several years of continuous testing, this type of plastic
has shown an outstanding capability to replace chain sprocket idlers on all types
of machinery. As well as being used on the earlier models of Gleaner combines,
there has been excellent success with them on the more recent models, where
idler bearing pulleys and sprockets were being used. This Plastic Wear Block can
definitely reduce your operating costs since the Plastic Wear Block is priced
considerably lower than the current idler bearing.
800.368.7773
Product ID
Description
CBM500000
Plastic wear block
Price
$6.95
HCC Paddle Tines
Maximized Pickup
High Performance Tines for Short or Sparse Crops
The Paddle is a proven tine replacement system that offers true high performance at harvest
time. When crop conditions make harvesting difficult and inefficient, the Paddle is the
cost-effective alternative to standard tines.
The Paddle’s six-inch width lift and feeds crop that standard tines miss. The Paddle provides
full crop contact, even with short crop, and delivers positive and even feeding into the
header. The Paddle helps reduce or eliminate the need for an expensive air reel.
The Paddle is available for wood bat, tear-drop, and tube-type reels. HCC’s patented tine
mounting system makes installation fast and easy. Paddles are packaged ten to a box and
include mounting hardware with complete installation instructions.
Original Tine Spacing
The “Paddle” offers several
advantages over standard tines
including:
• Increased Harvest
• Improved Feeding
• Cleaner Cutterbar
• Faster Harvesting
Reel Width
18’
20’
25’
30’
36’
4.5”
40
40
50
60
N/A
6.0”
30
40
40
50
60
The “Paddle” is packaged ten to a box and includes “Paddles”, screws and
complete installation instructions.
HCC Paddle Tines
Product ID
Description
HCC783950
Paddle Tines, 10-pack, Polytine reel (1)
$52.50
Price
HCC783845
Paddle Tines, 10-pack, ML reel (3)
$52.50
HCC783846
Paddle Tines, 10-pack, Level II reel (4)
$52.50
HCC783949
Paddle Tines, 10-pack, wood bat reel (5)
$52.50
Reel Tine Identification
(1) Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” (114 mm) apart. The tines fit into the
notches and are fastened to the back of the metal bat approximately 3” (76 mm) above the notch. Supplied from
1984-1989.
(2) Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits into
a hole on the front of the bat approximately 2.5” (64 mm) above the edge. The Love Reel was not manufactured by
HCC Inc.
(3) ML Reels have a 1.375” (35 mm) tube with 0.4” (10 mm) round holes spaced approximately 4.5” (114 mm) apart.
The tines have a round nub that fits into a round hole in the tube. Supplied from 1989-1999.
The Paddle is designed to
provide a complete sweep of the
header with each rotation. By
limiting the number of Paddles
used, you save installation time
& money.
(4) Level II Reels have a 1.375” (35 mm) tube with 0.5” (12.7 mm) hex holes spaced 6.0” (152 mm) apart. The tines
have a hex nub that fits into a hex hole in the tube. Standard since 1999/2000.
(5) Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” (114 mm) apart. The tines are
pressed into the bat and there is a metal clip riveted to the bat to provide support to the tine.
www.sidist.com
43
HCC OEM Replacement Reel Tines
Reel Tine Identification
(1) Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” (114 mm) apart. The tines fit into the notches and are fastened to the back of the
metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989.
(2) Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately
2.5” (64 mm) above the edge. The Love Reel was not manufactured by HCC Inc.
(3) ML Reels have a 1.375” (35 mm) tube with 0.4” (10 mm) round holes spaced approximately 4.5” (114 mm) apart. The tines have a round nub that fits into a
round hole in the tube. Supplied from 1989-1999.
HCC OEM Replacement Reel Tines
(4) Level II Reels have a 1.375” (35 mm) tube with 0.5” (12.7 mm) hex holes
Price spaced 6.0” (152 mm) apart. The tines have a hex nub that fits into a hex hole in
the tube. Standard since 1999/2000.
HCC782018
Polytine reel tine, 10-pack, with
screws (1)
$22.94
HCC782123
Polytine reel tine, 500-pack, with
screws (1)
$779.10
(5) Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5”
(114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted
to the bat to provide support to the tine.
HCC783707
HCC782094
Love reel tine, 10-pack, with screws
(2)
$28.98
HCC782124
Love reel tine, 275-pack, with screws
(2)
$673.58
HCC783597
HCC224048
HCC783708
HCC224049
ML reel tine, full bat, 10-pack, with
screws (3)
ML reel tine, full bat, 180-pack, with
screws (3)
ML reel tine, right hand bat, one (3)
ML reel tine, right hand bat, 6-pack,
with screws (3)
ML reel tine, left hand bat, one (3)
ML reel tine, left hand bat, 6-pack,
with screws (3)
ML reel tine, no bat, one (3)
ML reel tine, no bat, 6-pack, with
screws (3)
HCC782226
HCC782551
HCC224017
HCC782223
HCC224018
HCC782224
HCC224019
HCC782225
$28.98
$441.00
$3.13
HCC783709
HCC224050
HCC783710
Level II reel tine, full bat, 10-pack, with
screws (4)
Level II reel tine, full bat, 130-pack,
with screws (4)
Level II reel tine, left hand bat, one (4)
Level II reel tine, left hand bat, 10-pack,
with screws (4)
Level II reel tine, right hand bat, one (4)
Level II reel tine, right hand bat, 10pack, with screws (4)
Level II reel tine, no bat, one (4)
Level II reel tine, no bat, 10-pack, with
screws (4)
Price
$35.70
$405.30
$3.52
$32.55
$3.52
$32.55
$3.52
$32.55
$17.06
$3.13
HCC480056
Wood bat steel tine, one (5)
$2.33
HCC480057
Clip, for wood bat steel tine, one (5)
$0.27
$17.06
$3.71
$20.79
The Sure Stop
Features:
• 90 Decibel Alarm & LED Light Signals Your Exact Stopping Position
• Operates on 110V, 8‐Foot Cord Included
• Weather Resistant
• Proven Technology for 10+ Years
The Sure Stop Applications:
•
•
•
•
•
Trailer Placement under Bins
Trailer Placement over Pit Screws
Alignment with Transport Augers
Alignment on Truck Scales
Permanent Mount or Portable with
Optional Tri‐Pod (not included)
800.368.7773
Product ID
Description
WPS100000
Sure Stop
Price
$595.00
INVENTED & MADE BY FARMERS FOR FARMERS
HCC Gateway Sieves & Chaffers
Made By
Tested and Refined Over Several Harvest Seasons
by High-Hour Combine Users
Gateway™ Sieves & Chaffers offer a number of advantages
over standard steel sieves and chaffers including:
• Greater slat lubricity for improved crop flow
• Improved grain cleaning
• Reduces combine down time
• Less chaff build-up
• Rust proof, resists freezing
• Repairable with reduced wear and tear
• Lightweight - up to 50% lighter
The Gateway, HCC’s NEW sieve and chaffer system, is significantly lighter than standard
sieves and chaffers found on current combines. The patented design utilizes aluminum and
plastic construction for lower frame weight. That reduces wear and tear on cleaning shoe
bushings and bearings, extends their life, and reduces
combine downtime.
Two slat design options for a
variety of crops. The “LT” (top
45mm) and “ST” (bottom
33mm) are available.
Unlike conventional all-steel sieves and chaffers that
are difficult or impossible to repair, the modular
construction of Gateway Sieves & Chaffers permits
easy and cost-effective repair. The added lubricity of
the plastic slats also prevents crop build up on the
slats, especially when harvesting in near-freezing
conditions.
Side-by-side field comparisons demonstrate that
Gateway Sieves & Chaffers clean grain as well or better
than current systems. Gateway Sieves excel in cleaning
lighter crops (like alfalfa seed) and heavy crops (like
high yield / high moisture corn).
Handle makes it easy to
adjust slats.
Gateway Sieves & Chaffers are manufactured by HCC,
Inc., the same company that makes virtually all of the
original equipment sieves and chaffers.
As a result, fit and function is guaranteed to meet or
exceed original equipment standards. Gateway™ works
with manual or remote adjustment systems.
Slats are infinitely adjustable to
match your specific crop needs. Slat
opening is uniform and repeatable.
The number of adjustment controls
will match most units.
Why spacing options?
Narrow Spacing (33mm): Used for small grains:
wheat, alfalfa, and cereal grains; 33ST top 33ST
bottom.
Modular construction permits
easy and cost-effective repair.
Wide Spacing (45mm): Used for large crops: corn
and soybeans; provides faster operation through
high-yielding crop; 45LT top 33ST bottom.
Currently available for most combines.
Please call for current pricing on specific makes and models.
Slat connectors are durable and
provide reliable adjustment
consistency. All components are
replaceable for quick and economic
repair.
www.sidist.com
45
HCC Orbit Trac II Reel Kit
New &
Improved!
Eliminating the Reel - Auger Gap
True High Performance
The revolutionary, patent-pending design of the
Orbit Trac II is tailored to today’s high-performance
headers and brings the reel tines right up to the
auger before exiting the crop. The old-fashioned reel
is replaced with a double-track system. The unique
shape of the Orbit Trac II allows the reel tines to
break their circular path and swing directly past the
auger. Crop flow is positive. Build-up and slugging is
reduced.
Product ID Product Description
AGCO 400-8000 Series
The Orbit Trac II is a proven solution
that has been field tested by large
operators and custom cutters for
six years. The Orbit Trac II has been
designed as a retrofit for all HCC
tube-type reels. Installation is easy
and can be accomplished on the
farm in a few hours.
HCC031371
HCC031372
AGCO, 400, 500, 800, 8000 series, 25-35’
AGCO, 400, 500, 800, 8000 series, 22’ & shorter
$2,591.27
$1,360.53
AGCO, 8200 series, 25-35’
AGCO, 8200 series, 20’ & shorter
$2,591.27
$1,360.53
AGCO 8200
HCC031373
HCC031396
Case-IH 1010 & 1020 (Verify single eccentric or double eccentric reel.)
HCC031382
HCC031383
Case-IH, 1994 & prior, 22’ & longer
1010 headers (-JJC0200000) & 1020 headers (-JJC0215000)
Case-IH, 1994 & prior, 20’ & shorter
1010 headers (-JJC0200000) & 1020 headers (-JJC0215000)
Case-IH, 1995-1997, 22’ & longer
1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000)
Case-IH, 1995-1997, 20’ & shorter
1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000)
Case-IH, 1998 & newer, 22’ & longer
1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-)
Case-IH, 1998 & newer, 20’ & shorter
1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-)
Go with the flow. The
Orbit Trac II™ allows you to
harvest more crop in less
time:
HCC031380
• Continuous crop flow –
less slugging
Case-IH 2010 & 2020
• Positively places crop into the auger
Case-IH 3020
• Adjusts reel path to
specific header depth and
auger size
• Longer sweep – more
control of crop entry to
header
• Six years of field-testing
• Retrofits all HCC ML and
Level II reels built since
1990
• Lower Half of Track is
Now Made of Steel!
Price
HCC031381
HCC031369
HCC031370
HCC031376
HCC031377
HCC031532
HCC031533
Case-IH, 2010, 2020, 22-35’
Case-IH, 2010, 2020, 20’ & shorter
$2,591.27
$1,360.53
$2,591.27
$1,360.53
$2,591.27
$1,360.53
$2,591.27
$1,360.53
Case-IH, 3020, 25-35’
Case-IH, 3020, 20’
$2,591.27
$1,360.53
Honey Bee, double eccentric
$2,591.27
Honey Bee
HCC031385
John Deere 600 Series (Will not fit Flex Draper)
HCC031374
HCC031375
John Deere, 600 series, 25’ & longer
John Deere, 600 series, 22’ & shorter
$2,591.27
$1,360.53
John Deere 900 Series
HCC031367
HCC031368
John Deere, 900 series, (serial # 645301-) 25’ & longer
John Deere, 900 series, (serial # 645301-) 22’ & shorter
$2,591.27
$1,360.53
Massey Ferguson
HCC031384
HCC031388
HCC031373
HCC031396
Massey Ferguson, 1859, single eccentric
Massey Ferguson, draper, double eccentric
Massey Ferguson, 8200 series, 25-35’
Massey Ferguson, 8200 series, 20’ & shorter
$1,360.53
$2,591.27
$2,591.27
$1,360.53
New Holland
HCC031378
HCC031379
HCC031376
HCC031377
HCC031400
HCC031401
HCC031532
HCC031533
New Holland, 970-973, 25’ & longer
New Holland, 970-973, 22’ & shorter
New Holland 72C, 74C, 22-35’
New Holland 72C, 74C, 20’ & shorter
New Holland 73C, 22’ & longer
New Holland 73C, 20’ & shorter
New Holland 740CF, 22’ & longer
New Holland 740CF, 20’ & shorter
$2,591.27
$1,360.53
$2,591.27
$1,360.53
$2,591.27
$1,360.53
$2,591.27
$1,360.53
Orbit Trac II Update Kits
HCC031410
HCC031411
HCC031412
800.368.7773
Orbit Trac II Update Kit, Double Eccentric (Steel track for bottom half of Orbit Reel)
Orbit Trac II Update Kit, Single Eccentric, LH (Steel track for bottom half of Orbit Reel)
Orbit Trac II Update Kit, Single Eccentric, RH (Steel track for bottom half of Orbit Reel)
$476.90
$238.45
$238.45
Note: The new and improved Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac
II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most
headers since 1990.
HCC Complete orbit trac II reel
For Combines and Swathers - Smoother crop flow, Less downtime & superior component strength
HCC Reels are constructed from resilient, durable materials such as 14 gauge HSLA tubing for bat tubes, and patented, tough polymer tines
giving the reels greater strength at lower weight. Center tubes on 15 to 30 foot reels are 8-inches in diameter and 10-inches on reels larger than
30 feet. Integral hex drive pins increase pin shear strength by 75%, while heavy, welded 8mm crank arms increase bat tube lateral and torsional
strength. HCC Reels feature an innovative tine layout, staggering tines to reduce weight and bat wrapping while creating a more efficient
tine path. With fewer parts, stronger components, 35 – 40% greater visibility, and lighter weight, HCC Reels improve performance and reduce
downtime.
Product ID
Product Description
Pkg. Price Total Price
AGCO 400-8000 Series
HCC031392
HCC030561
HCC031392
30’
HCC030581
25’
Orbit II attaching package, AGCO, 25’ & 30’
Reel bundle, Level II, AGCO, CIH, 25’
Orbit II attaching package, AGCO, 25’ & 30’
$3,962.73
$1,991.19
$3,962.73
$2,304.86
Orbit II attaching package, AGCO 8200, 25’ & 30’
Orbit II attaching package, AGCO 8200, 25’ & 30’
Orbit II attaching package, AGCO 8200, 35’
Reel bundle, Level II, AGCO 8200, 35’
$3,860.42
$1,991.19
$3,860.42
$2,304.86
$4,833.55
$3,326.26
Orbit II attaching package, CIH 1020, 25’ & 30’
$4,136.42
$1,991.19
$4,136.42
$2,304.86
Reel bundle, Level II, CIH 2020, 25’
Reel bundle, Level II, CIH, JD, NH, 30’
Orbit II attaching package, CIH 2020, 35’
$4,172.11
$1,950.75
$4,172.11
$2,170.08
$4,893.04
$3,332.21
Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’
Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’
Orbit II attaching package, CIH 3020, NH 740CF, 35’
$4,318.24
$1,851.49
$4,318.24
$2,320.80
$5,266.32
$3,332.21
$5,953.92
$6,267.59
AGCO 8200
HCC031397
HCC030561
HCC031397
30’
HCC030581
HCC031395
35’
HCC032082
25’
$5,851.61
$6,165.28
$8,159.81
Case-IH 1020 (1)
HCC031387
HCC030561
HCC031387
30’
HCC030581
25’
$6,127.61
$6,441.28
Case-IH 2020
HCC031393
HCC030560
HCC031393
30’
HCC030580
HCC031398
35’
HCC032023
25’
$6,122.86
$6,342.19
$8,225.25
Case-IH 3020
HCC031534
HCC030562
HCC031534
30’
HCC030582
HCC031535
35’
HCC032023
25’
$6,169.73
• Lower Weight
• Stronger Construction
• Increased Visibility
• More Effective Crop
Movement
$6,639.04
$8,598.53
John Deere 600 Series (Will not fit Flex Draper)
HCC031389
HCC030562
HCC031389
30’
HCC030582
HCC031402
35’
HCC032023
25’
Orbit II attaching package, JD 600, 25’ & 30’
Orbit II attaching package, JD 600, 35’
$3,980.57
$1,851.49
$3,980.57
$2,320.80
$5,000.70
$3,332.21
$5,832.06
$6,301.37
$8,332.91
John Deere 900 Series
HCC031390
HCC030562
HCC031390
30’
HCC030580
25’
$4,063.84
$1,851.49
$4,063.84
$2,170.08
$5,915.33
$6,233.92
New Holland 740CF
HCC031534
HCC030562
HCC031534
30’
HCC030582
HCC031535
35’
HCC032023
25’
Orbit II attaching package, CIH 3020, NH 740CF, 35’
$4,318.24
$1,851.49
$4,318.24
$2,320.80
$5,266.32
$3,332.21
(1) For Case-IH headers 1998 and newer with serial number #JJC0315001 & CBJ023003 and up.
Please call for complete Reel replacement options for other combines and swathers not listed above.
Note: The new and improved Orbit Trac II Reel kit has the bottom half of the track made out of steel.
The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels.
They have been original equipment on most headers since 1990.
$6,169.73
$6,639.04
$8,598.53
Advance Engineering has
allowed a stronger reel with
fewer parts. Steel tine reel
option also available.
Lighter weight reels require
less horsepower and lower
drive loads.
Made By
www.sidist.com
47
Burvee Bubble-Up Auger
Completely Fill Your Grain Bin Extension
• Reduces grain damage
• Reduces wear & load on combine bin fill system
• Utilizes “super edge” helicoid for longer wear
• Large trouble free orbit motor for high torque
• Mounting brackets attach quickly & easily
• Installs in less than one hour
• Quickly folds down lower than the cab
• Includes a one year warranty
the
original
The Bubble-Up Auger is a good companion product for any make of combine hopper
extensions. It will take the load and strain off of the combine’s hopper fill system. The
Bubble-Up Auger enables the user to put the “PEAK OF THE HEAP” where it’s wanted and
provides more complete filling of the combine’s hopper extension.
The Bubble-Up Auger uses 8” diameter by 46” tall open flight auger that utilizes “Super Edge”
helicoid for longer wear and a heavy duty hydraulic motor for years of trouble free power.
The Bubble-Up Auger quickly folds down into the combine’s hopper for storage.
The Bubble-Up Auger requires approximately 10 GPM of oil at 1,500 PSI to operate. It will run
approximately 300 RPM. Because it runs 100% full in operation, it can handle large quantities
of grain per hour, posing no problems with either 8 or 12 row corn heads.
Mounting Brackets
Attach Quickly
The Bubble-Up Auger includes everything needed to install it in the combine hopper, except
hoses, which are best measured and made up after installation of the Bubble-Up Auger is
completed.
Normally, the Bubble-Up Auger connects directly into the reel drive outlets for corn head
work or in series with the reel drive motor for flex head work. When operated in this fashion,
the Bubble-Up Auger will run full speed for corn; but markedly slower when doing flex head
work. This happens because when the operator sets the speed of the reel for his harvest
conditions, the Bubble-Up Auger will receive less oil, resulting in a slower speed. Generally,
because the bushels of crop that need to be handled is less with flex head work, having the
Bubble-Up Auger run slower is usually not a problem, but something to be aware of.
Reduces Grain Damage
Relieves Wear & Load
Under normal conditions it is NOT necessary to purchase the optional hydraulic kit
since the Bubble-Up Auger connects directly into the reel drive outlets. The only
exception is when harvesting rice it is recommended to purchase the hydraulic kit.
If it is desired that the Bubble-Up Auger run at full speed in all harvest applications, then it
needs to be plumbed directly into the combine’s reel drive circuit. Various kits are available
that include all the fittings and valves required.
Pivot Plate Mount for
Ease of Adjustment
The Bubble-Up Auger Fits All Popular Makes
- Regardless of Their Bin Fill System.
Burvee Bubble-Up Auger
Product ID
Description
BRV500100
BRV500200
BRV500300
BRV500400
BRV500500
BRV500600
BRV500700
BRV500900
Bubble-Up Auger
Hydraulic kit for John Deere 20 series
Hydraulic kit for John Deere 9000 series
Hydraulic kit for IH/Case-IH, before mid-1995 (1400, 1600)
Hydraulic kit for Case-IH, mid 1995-2000
Hydraulic kit for Case-IH, 2001-current
Hydraulic kit for New Holland, TR96, TR97, TR98
Hydraulic kit for other makes (specify make, model and year)
800.368.7773
Price
$895.00
$150.00
$200.00
$150.00
$200.00
$200.00
$200.00
$200.00
Quickly Folds Lower
Than Your Cab
Burvee Hopper Topper
Flexible-Sided PopUp Combine Grain Bin
Extension
The unique and innovative hopper
topper offers time and money
saving features
The HOPPER TOPPER uses a high quality
22 ounce vinyl-coated nylon cord fabric
that will not shrink, stretch, rot or mildew
and is pliable to 40 degrees below zero.
This fabric is extremely tough and tear
resistant. All the seams are double stitched,
making them stronger than the parent material.
Up When You Need It!
A Full 24” Tall
Down When You Don’t!
Only 3” Tall
Allows you to use more of your valuable harvest time combining – instead of being parked alongside a truck unloading smaller
amounts of grain. Even in lower yielding crops, if you can make an extra round between dumps; think of how many extra acres
you’ll be able to harvest each day.
Custom harvesters who transport their combines don’t have to worry about a bulky or rigid combine grain bin extension
interfering with their transport clearance.
Some assembly is required.
Burvee Hopper Topper
Product ID
Description
BRV244250
BRV266200
BRV277200
BRV288200
BRV294000
BRV296000
BRV298000
BRV299000
Hopper Topper, John Deere 4425, 4435
Hopper Topper, John Deere 6620
Hopper Topper, John Deere 9400, 9410, 9450, 9460, 9500, 9510, 9550, 9560
Hopper Topper, John Deere 9600, 9610, 9650, 9660
Hopper Topper, John Deere 9560STS, 9570STS
Hopper Topper, John Deere 9650STS
Hopper Topper, John Deere 9650CTS, 9750STS
John Deere
Added
Bushels
Price
56
58
65
75
85
95
125
125
-
$725.00
$750.00
$770.00
$780.00
$925.00
$960.00
$825.00
$825.00
N/A
56
70
63
66
56
70
60
85
$725.00
$740.00
$730.00
$740.00
$725.00
$740.00
$740.00
$890.00
65
86
81
65
$850.00
$760.00
$760.00
$850.00
90
90
100
100
$810.00
$810.00
$825.00
$825.00
Case International
BRV114200
BRV114400
BRV114600
BRV114800
BRV116200
BRV116400
BRV116600
BRV116800
Hopper Topper, Case-IH 1420
Hopper Topper, Case-IH 1440, short auger only
Hopper Topper, Case-IH 1640, 1644, 2144, 2344, 2544, short auger only
Hopper Topper, Case-IH 1660, 1666, 2160, 2366, 2566
Hopper Topper, Case-IH 1680, 1688, 2180, 2188, 2388
Gleaner
BRV320000
Hopper Topper, Gleaner N5, N6, N7
BRV340000
Hopper Topper, Gleaner R40, R42
BRV330000
Hopper Topper, Gleaner R50, R52
BRV350000
Hopper Topper, Gleaner R60, R62, R65, R70, R72, R75
Note: Hopper Topper only fits onto the main hopper of the above models.
• Use only when you want
or need to
• Allows easy access to your
shop or shed without
removal
• Unload using only one
headland
• Increased capacity &
decreased wear on grain
carts and operators
• Use more of your valuable
harvest time combining
• Cleans easily with damp
cloth
• Retains its new
appearance year after
year
• Designed by a farmer for
farmers
• Proven to work
New Holland
BRV430000
Hopper Topper, New Holland TR70
BRV410000
Hopper Topper, New Holland TR75, TR86, TR87, TR88
BRV440000
Hopper Topper, New Holland TR95
BRV420000
Hopper Topper, New Holland TR89, TR96, TR97, TR98, TR99
Note: Call for pricing and availability of makes and models not listed.
• Easily Raised & Lowered in
Minutes
www.sidist.com
49
CALMAR AUGER SPOUT
Universal Flow Control. Control the Flow!
With a Calmar Auger Spout, you can efficiently and safely direct the flow of
grains and oilseeds to all areas of your truck box or grain cart without splash,
spillage, and wind loss!
CIL014000
FC-1
CIL014010
FC4-U08
CIL017000
FC4-U09
Price
Calmar Auger Spout, Standard
Only fits bottom discharge augers 14” and under.
Will not work on end discharge augers.
Includes extra extensions to be used at the user’s discretion.
Most economical model, but does not feature pressure release
safety door.
Calmar Auger Spout, Deluxe, 14”
Fits bottom discharge and end discharge augers 14” and under.
Features a pressure release safety door which will open should
the bottom of the Auger Spout becomes plugged or blocked.
Includes extra extensions to be used at the users discretion.
Note: Not recommended for 2009 and newer Case- IH and New
Holland combine models; use FC4-U09
Calmar Auger Spout, Deluxe, 14-17”
Fits bottom discharge and end discharge augers from 14” to 17”.
Features a pressure release safety door which will open should
the bottom of the Auger Spout becomes plugged or blocked.
Includes extra extensions to be used at the user’s discretion.
HCC Flip Reel Kit
Eliminate Crop Wrapping Around Bat Tubes
The Flip Reel Kit is designed to eliminate wrapping around bat
tubes and is particularly effective in canola and other tall, stringy
crops.
Installation is easy and can be done on equipment you already
own. Designed as a retro-fit for all HCC tube-type reels built
since 1990. ML 4-1/2” tine spacing or Level II 6” tine spacings are
designed to work with the Flip Reel Kit. You can install it yourself
in just a few hours using the Installation Instruction Manual.
$338.00
$549.00
$799.00
OEM on left & Calmar Auger Spout on right.
HCC Flip Reel Kit
Product ID Product Description
AGCO
AGCO, 400, 500, 800, 8000 series, double eccentric
AGCO, 400, 500, 800, 8000 series, single eccentric
AGCO, 8200 series, double eccentric
AGCO, 8200 series, single eccentric
AGCO, Draper, double eccentric
AGCO, Draper, single eccentric
$1,825.57
$991.74
$1,984.55
$1,070.69
$1,875.32
$1,016.61
HCC031516
HCC031520
HCC031517
HCC031523
Case-IH, 1010, 1020, 3020, double eccentric
Case-IH, 1010, 1020, 3020 single eccentric
Case-IH, 2010, 2020, double eccentric
Case-IH, 2010, 2020, single eccentric
$1,845.04
$991.74
$1,845.04
$1,010.12
HCC031357
HCC031513
Honey Bee, clamp mounted, double eccentric
Honey Bee, bracket mounted, double eccentric
$2,011.59
$2,031.06
Case-IH
Honey Bee
John Deere
HCC031524
HCC031519
HCC031525
John Deere, 600 series, double eccentric
(Will not fit Flex Draper)
John Deere, 600 series, single eccentric
(Will not fit Flex Draper)
John Deere, 900 series, double eccentric
John Deere, 900 series, single eccentric
$1,040.40
$2,372.81
$1,241.56
HCC031515
HCC031520
HCC031517
HCC031523
HCC031515
HCC031520
HCC031516
HCC031520
New Holland, 971, 973, double eccentric
New Holland, 971, 973, single eccentric
New Holland 72C, 74C, double eccentric
New Holland 72C, 74C, single eccentric
New Holland 73C, double eccentric
New Holland 73C, single eccentric
New Holland 740 CF, double eccentric
New Holland 740 CF, single eccentric
$1,825.57
$991.74
$1,845.04
$1,010.12
$1,825.57
$991.74
$1,845.04
$991.74
New Holland
Standard Reel
• Eliminates crop wrapping around bat
tubes
• Designed to fit HCC tube type reels built
since 1990
800.368.7773
Price
HCC031515
HCC031520
HCC031510
HCC031521
HCC031511
HCC031522
HCC031518
Flip Reel
• Easy Installation
• Serves as an Extension to your
auger for easier unloading
• Grain flow is concentrated but not
restricted
• Built in pressure release
• Fits 12” - 17” augers
$1,930.48
Radura Disc Mower Blades
Radura Disc Mower Blades
Product ID Application
Width Length Hole
Size Price
RSP041864 Claas, Deutz-Fahr, Fella, Krone
LH 1.575
3.780
RSP041870 Deutz-Fahr
LH 1.575
3.780
RSP041874 Deutz-Fahr
LH 1.575
3.543
Greenland, John Deere, Kuhn, Massey
RSP041879
LH 1.575
3.425
Ferguson, New Holland, PZ Zweegers
Greenland, John Deere, Kuhn, Massey
RSP041882
RH 1.575
3.425
Ferguson, New Holland, PZ Zweegers
RSP041887 Deutz-Fahr SM55
Flat 1.575
3.780
RSP041895 Galfre, Maragon
LH 1.811
4.252
RSP041896 Galfre, Maragon
LH 1.811
4.252
RSP041899 PZ Zweegers
LH 1.811
4.134
Gehl, John Deere, Kuhn, New Holland,
RSP041926
LH 1.772
3.740
Sitrex
Gehl, John Deere, Kuhn, New Holland,
RSP041928
RH 1.772
3.740
Sitrex
RSP041973 Krone
LH 1.890
4.409
RSP041974 Krone
RH 1.890
4.409
RSP041986 Case-IH, New Holland
LH 1.969
4.331
RH 1.969
4.331
RSP042006 Vicon
LH 1.890
4.213
RSP042007 Vicon
RH 1.890
4.213
Case-IH, Challenger, Gehl, Hesston, Massey
RSP042010
RH 1.850
4.213
Ferguson, New Idea
Case-IH, Challenger, Gehl, Hesston, Massey
RSP042011
LH 1.850
4.213
Ferguson, New Idea
Claas DISCO 210/250/260/290/300/340/30
RSP042014
RH 1.890
4.527
00/3050/8500
Claas DISCO 210/250/260/290/300/340/30
RSP042015
LH 1.890
4.527
00/3050/8500
RSP042018 Fella
LH 1.890
4.173
RSP042019 Fella
RH 1.890
4.173
Case-IH, Challenger, Gehl, Hesston, John
RSP042022 Deere, Kuhn, Massey Ferguson, New
LH 1.772
4.213
Holland, New Idea
Case-IH, Challenger, Gehl, Hesston, John
RSP042026 Deere, Kuhn, Massey Ferguson, New
RH 1.772
4.213
Holland, New Idea
AGCO, Case-IH, Challenger, Hesston,
RSP042030
RH 1.850
4.213
Massey Ferguson, New Idea
RSP042031
LH 1.850
4.213
RSP042034 Gehl, John Deere, Kuhn, New Holland
LH 1.772
4.843
RSP042037 Gehl, John Deere, Kuhn, New Holland
RH 1.772
4.843
RSP042049
RH 1.890
4.252
RSP042050
LH 1.890
4.252
RSP042051 Krone
LH 1.969
3.780
RSP042052 Krone
RH 1.969
3.780
RH 1.969
4.331
LH 1.969
4.331
AGCO, Bush Hog, Challenger, Hesston,
RSP042057
RH 1.969
4.724
AGCO, Bush Hog, Challenger, Hesston,
RSP042059
LH 1.969
4.724
Bush Hog, Case-IH, Fella, Gehl, Greenland,
RSP042064
LH 1.890
4.724
Lely, Massey Ferguson, New Idea, Vicon
Bush Hog, Case-IH, Fella, Gehl, Greenland,
RSP042066
RH 1.890
4.724
Lely, Massey Ferguson, New Idea, Vicon
Bush Hog, Case-IH, Challenger, Hesston,
RSP052697
RH 1.969
4.724
Bush Hog, Case-IH, Challenger, Hesston,
RSP052698
LH 1.969
4.724
Please specify make and model so correct blade(s) can be selected.
0.748
0.748
0.748
$1.03
$1.18
$1.08
0.640
$1.20
0.640
$1.20
0.827
0.827
0.827
$0.93
$1.78
$1.78
$1.38
0.640
$1.63
0.640
$1.63
0.748
0.748
0.896
0.896
0.725
0.725
$1.95
$1.95
$2.08
$2.08
$2.05
$2.05
0.728
$2.05
0.728
$2.05
0.748
$1.75
0.748
$1.75
0.748
0.748
$1.95
$1.95
0.717
$1.95
0.717
$1.95
0.728
$2.05
0.728
$2.05
0.717
0.717
$2.03
$2.03
0.718
$2.05
0.718
$2.05
0.748
0.748
0.896
0.896
$1.78
$1.78
$2.08
$2.08
0.906
$1.90
0.906
$1.90
0.728
$1.93
0.728
$1.93
0.896
$2.10
0.896
$2.10
Rolled Edges for Greater Strength
and Durability with Less Chipping
and Breakage than other Brands
with Ground Edges.
The trademark RADURA® is world famous for
disc mower blades with a long service life and
a clean cut.
A special cold rolling process of the cutting
edges on the RADURA® blade results in a more
durable cutting edge and maintains a sharp
edge longer than blades with ground edges.
RADURA® blades are used by the leading disc
mower manufacturers and are the first choice
in the replacement market worldwide.
Advantages of RADURA® quality blades
•Highest wear life due to special edge
making process
•Maximum safety due to rigorous quality
control and testing
•Tens of millions used by OEM and
aftermarket customers
•Excellent corrosive protection
www.sidist.com
51
SCh Easycut II Cutting System
High Quality, Effective and Efficient
The ProCut Section The greatest damage to knife sections and guards is caused by bent sections. With
ProCut sections, this is eliminated because the entire knife section is heat-treated, not just the cutting
edge as with conventional made sections. Therefore the section does not bend. This considerably
lengthens the life of the knife and reduces damage to the guards. All ProCut sections are secured
with special serrated bolts. The shoulder of the bolt wedges itself in the section and the knifeback.
Self-locking nuts ensure a secure and durable splice. The cutouts in the center of the section
help clean out residue buildup and also reduce the weight of the knife. The sections are not
chrome plated. They are zinc plated and have a self-sharpening effect. Chromed sections have a surface that is much harder than
the guards and wear the guards faster and do not stay sharp as long. Also, chrome plating is a very hazardous process and an
environmental concern.
The Sectional Knife All SCH cutter bars are manufactured as sectional knives. Now you can
transport a sickle bar of any length in a car, pickup or ship it by overnight carrier. The spliced
knife assemblies can be packaged in easy to handle nine foot or less lengths to virtually
eliminate delays in delivery, damage in transport or injury in handling. Dealers can make up
any length of knife from a minimal amount of segments. The special knife joint allows the
sectional knife to perform in the same way as a one-piece knife and is as strong or stronger
than the original knifeback.
flatter +
optimized cutting edge
The Double Guard The guard is made out of high
wider ridge
quality spring steel with an extremely hard and
New For
wear resistant surface. Because the bottom and
2011!
top of the guard are bolted to the cutterbar, the
guards hardly ever bend and never have the top lip
break off, a common problem of standard guards.
This extraordinary high stability has made the use of croplifters much more
reliable, even under extreme working conditions. Beveled guard cutting
square hole
blunt guard causes
edges hold the crop more firmly, and do not pull it into the cutting gap; this
less spearing of trash
considerably improves the discharge of the cut crop. The cutting forces and
therefore the power expended is reduced substantially. The depth of hardening on the cutting edge of the guard is increased
by about 30% because of the beveled edge. As a result, the guards last longer. New for 2011: The SCH EasyCut II guard gets
more crop through the cutting system. The cutting edge was lengthened by 7% and the cutaway was enlarged for better flow. In
addition, the blunt guard eliminates spearing of residue, especially in no-till conditions.
The Cutting System The combination of the SCH EasyCut II guard and cutterbar knife
create a cutting system which can be used for cutting almost everything in the world of
forestry and agriculture. Even onions or hedges present no problem to the SCH EasyCut
II system. The design of the EasyCut II guard also eliminates hold down clamps, shims
and all of the adjusting that goes with them. Unlike other cutting systems, there’s no
upward pressure on the knife. With the section alternately cutting against the top and
bottom of the guards, the cutting edges stay close together. Because the knife remains
balanced, you get top cutting performance from start to finish. And with our system
always in balance, it keeps cutting under more severe conditions, it’s easier to drive, and
we have less breakage.
800.368.7773
SCH EasyCut II cutting systems can be retrofitted on almost all types of combine
harvesters, swathers, mower conditioners and sickle bar mowers.
SCH EASYCUT II system
New &
Improved!
High Quality, Effective and Efficient
flatter +
wider ridge
The Double Guard The guard is made out of high quality spring steel with
an extremely hard and wear resistant surface. Because the bottom and top
of the guard are bolted to the cutterbar, the guards hardly ever bend and
never have the top lip break off, a common problem of standard guards.
This extraordinary high stability has made the use of croplifters much more
reliable, even under extreme working conditions. Beveled guard cutting
edges hold the crop more firmly, and do not pull it into the cutting gap;
this considerably improves the discharge of the cut crop. The cutting forces
square hole
blunt guard causes
and therefore the power expended is reduced substantially. The depth
of hardening on the cutting edge of the guard is increased by about 30%
because of the beveled edge. As a result, the guards last longer. The new SCH EasyCut II
guard gets more crop through the cutting system. The cutting edge was lengthened by
7% and the cutaway was enlarged for better flow. In addition, the blunt guard eliminates
spearing of residue, especially in no-till conditions.
The Cutting System The combination of the SCH EasyCut II guard and cutterbar knife
create a cutting system which can be used for cutting almost everything in the world of
forestry and agriculture. Even onions or hedges present no problem to the SCH EasyCut
II system. The design of the EasyCut II guard also eliminates hold down clamps, shims
and all of the adjusting that goes with them. Unlike other cutting systems, there’s no
upward pressure on the knife. With the section alternately cutting against the top and bottom of the guards, the cutting edges
stay close together. Because the knife remains balanced, you get top cutting performance from start to finish. And with our system
always in balance, it keeps cutting under more severe conditions, it’s easier to drive, and we have less breakage.
SCH Roller system
Reduce Friction,
Wear & Cost
Top Bridge Roller
SCH Bridge Rollers
SCP015768
SCP016330
Price
SCH bridge roller, bottom. Introduced in 2007; bolts on
top of guard and edge of roller rides on bottom of the $13.98
section
SCH bridge roller, top. Introduced in 2010; bolts on top
$13.98
of guard and edge of roller rides on top of section.
Replaces the standard wear
SCH Spacer Plates
plates on machines equipped SCP015810 SCH spacer plate, 4mm, 2-hole (used with bridge roller) $2.36
SCP015811 SCH spacer plate, 4mm, 3-hole (used with bridge roller) $3.50
with the SCH EasyCut II
cutting system. Typically, a
wear plate supports the knife. SCP015814 SCH spacer plate, 5mm, 3-hole (used with bridge roller) $3.50
With today’s wider platforms SCP015817 SCH spacer plate, 6mm, 3-hole (used with bridge roller) $3.50
and demand for better
cutting performance this
leads to more wear on the
knifeback and wear plates. The SCH Bridge Rollers reduces the friction on the knifeback and
allows the knife to run more smoothly for superior cutting performance.
The advantages of converting to the
SCH Bridge Rollers:
Bottom Bridge Roller
The Bridge Rollers are made with a
hardened roller, sealed bearings and a
• Less knifeback wear
cap to keep the dirt out. With reduced
• Less friction
knife resistance there is less load on
• Less knifeback breakage
the wobble box. Replace existing wear
• Easier knife installation
plates on current SCH cutting systems
• Less power required to drive the knife
or a new conversion kit can be ordered
• Less platform vibration
with Bridge Rollers. When replacing worn
wear plates a new knifeback is required to maintain proper tolerances.
Please refer to next page for kit prices.
www.sidist.com
53
SCH EasyCut II Kits
For Most Combines, Windrowers, Mower Conditioners & Mowers
Kit price includes all parts to convert to the SCH EasyCut II SYSTEM, including
one pre-assembled knife with knifehead, (less bearing) all guards, and hardware,
plus ten extra replacement sections with hardware and two guards. Please specify
coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is
recommended for soybeans and alfalfa; fine is recommended for wheat and grasses.
Also includes 10mm socket and 10mm wrench for section bolts.
Note: The ideal cutter bar speed is 540 RPM for optimum cutting performance.
SCH EasyCut Kit Prices
SCH Kit w/
SCH Kit w/
SCH Roller
SCH Kit w/
SCH Kit w/
SCH Roller
Width Wear
Width Wear
Plates
Rollers
Guide Kit*
Plates
Rollers
Guide Kit*
7
$686.00
$748.00
$92.00
19
$1,354.00
$1,514.00
$233.00
8
$735.00
$803.00
$95.00
20
$1,403.00
$1,574.00
$233.00
9
$784.00
$864.00
$110.00
21
$1,446.00
$1,623.00
$251.00
10
$832.00
$920.00
$129.00
22
$1,494.00
$1,685.00
$269.00
11
$882.00
$975.00
$129.00
22.5
$1,538.00
$1,734.00
$269.00
12
$936.00
$1,041.00
$148.00
24
$1,587.00
$1,795.00
$283.00
13
$986.00
$1,097.00
$159.00
25
$1,630.00
$1,844.00
$300.00
14
$1,049.00
$1,170.00
$171.00
27
$1,716.00
$1,955.00
$318.00
15
$1,116.00
$1,244.00
$184.00
30
$1,832.00
$2,089.00
$362.00
16
$1,170.00
$1,305.00
$196.00
35
$2,028.00
$2,329.00
$422.00
16.5
$1,201.00
$1,342.00
$196.00
36
$2,077.00
$2,383.00
$435.00
17
$1,231.00
$1,378.00
$203.00
39
$2,252.00
$2,635.00
$473.00
17.5
$1,263.00
$1,410.00
$208.00
40
$2,310.00
$2,690.00
$485.00
18
$1,293.00
$1,446.00
$208.00
42
$2,406.00
$2,802.00
$506.00
18.5
$1,323.00
$1,483.00
$220.00
45
$2,527.00
$2,827.00
$529.00
*Installing a roller guide kit on an existing SCH EasyCut cutting system requires a new knifeback.
Price Adjustments to SCH EasyCut Kits
All double drive kits
Add
$232.00
All Hiniker bars
Add
$141.00
All Massey Ferguson/Claas combine models
Add
$141.00
$141.00
All Massey Ferguson 8450 & 8460 models
Add
White combines with wobble box & Hart Carter floating cutter bar
Deduct
$78.00
Masey Ferguson combines with wobble box & Hart Carter floating cutter bar
Deduct
$78.00
Pitman arm style drives, Love and Hart Carter (combines only)
Deduct
$78.00
SCP083690: Optional 540 RPM, 11-1/2” pulley for Case-IH oil bath header.
$82.62
SCH EasyCut Sickle Bar Mower Kit Prices
Width
SCH Kit with Wear Plates
SCH Kit with Rollers
5
$313.00
$360.00
6
$387.00
$445.00
7
$447.00
$509.00
8
$509.00
$579.00
9
$569.00
$651.00
10
$631.00
$724.00
Kit price includes pre-assembled knife, without knifehead, all guards and hardware. Must re-use original
equipment manufacturer (OEM) knifehead. No extra replacement parts are included. Please specify coarse (7
serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa;
fine is recommended for wheat and grasses.
800.368.7773
New &
Improved!
• New and improved EasyCut
II blunt guard eliminates
spearing of residue
• New and improved EasyCut
II guard gets more crop
through the cutting system
• SCH knife system never
needs adjustment
• SCH guards bolt to top and
bottom of platform
• SCH guards are fully heat
treated
• SCH guards have two
beveled cutting edges
• SCH sections are fully heat
treated
• SCH sections will not bend
• Optional SCH rollers
improve performance
• Optional SCH rollers reduce
friction & vibration
SCH EasyCut II Kits
The SCH EasyCut II Kits pages are a list of the most common machines that can be converted to the SCH EasyCut
II cutter bar system. This may also be helpful in determining which parts to order for certain machines. If your
machine is not listed, this does not mean that we do not fit that machine. Please call for assistance.
Mfg.
AGCO
AGCO
AGCO
AGCO
AGCO
AGCO
AGCO
AGCO
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Type
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Platform, Rigid
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Model Description
300 Series, Early Style
500, 800, 8000, 300 Series, 3/4”
500, 800, 8000, 300 Series, 7/8”
8200
Hart Carter, Pitman Drive (1pc head)
Hart Carter, Pitman Drive (2pc head)
Hart Carter, Series 2
300 Series, Rigid
#9, 1/2” BB
#9, 7/16” BB
#31
1100, 100
1200
1300
990
1190
1490, 1590
8330
SC414
2062
2162
2162 Double Drive
4000
503
810 (4-1/2” COFS)
810 (5” COFS)
810 Hiniker
810 Pitman Drive
820
1020
2020, Double Drive (early style)
2020, S/N all “HAJ” & up to CBJ021301
2020, S/N CBJ021301 and after
3020
403 Hiniker
1010
201
230
275
375
721
725
1275
5000, 1/2” BB
5000, 7/16” BB
6000
8220
8340
8360, 7/16” BB
8370, 8830, 3/8” BB
8370, 8830, 7/16” BB
8380 Double Drive
Lefthand
Knifehead
SCP011195
SCP011222
SCP013997
OEM
OEM
OEM
SCP11252
SCP011195
OEM
OEM
OEM
OEM
OEM
OEM
SCP011259
SCP011185
SCP011186
SCP015474
SCP015474
SCP081373
SCP081379
SCP081379
SCP011185
OEM
SCP011252
SCP011227
SCP011227
OEM
SCP011226
SCP014266
SCP083792
SCP011213
SCP083815
SCP002401
OEM
SCP014266
OEM
SCP011185
OEM
OEM
OEM
OEM
SCP011229
SCP011185
SCP011185
SCP015428
SCP015474
SCP015474
SCP015474
SCP015474
SCP015474
SCP083616
Guards
Wear Plates or Spacers
12mm 14mm 17mm 4mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
5mm
6mm
x
x
x
x
Righthand
Knifehead
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
SCP081380
SCP081380
x
x
x
x
x
x
x
x
x
x
x
x
x
SCP083793
SCP011214
SCP083816
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
SCP083617
www.sidist.com
55
SCH EasyCut II Kits
Mfg.
Case-IH
Case-IH
Case-IH
Caterpillar
Caterpillar
Caterpillar
Claas
Ford
Ford
Ford
Ford
Frontier
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Type
Windrower
Windrower
Windrower
Platform, Flex
Platform, Flex
Platform, Flex
Windrower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Windrower
Windrower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Model Description
8820 Double Drive
8840, 8870 Double Drive
HDX162 Double Drive
Caterpillar
Caterpillar
Caterpillar, 5/16” BB
S450
501
505
515
642
1477
1070
1090
1216 Hydra Swing
2130
2160, 1/4” BB
2160, 7/16” BB
2170
2270
2650
2850
HK108
2230
2240
1010
1070, 1071, 3/8” BB
1085, 1090, 1091, 1095
1110
1120
1150
1160, 8200, 1/4” BB
1160, 8200, 7/16” BB
1160, 8200, 3/8” BB
1170 Double Drive
1260, 7/16” BB
1265 Hydra Swing
1275 Double Drive
1660, 1/4” BB
PT 10
320
420
500, 1/2” BB
520, 7/16” BB
600
1014 Hydra Swing
2262 Double Drive, 1/2” BB
5200
6400, 6600, 3/8” BB
6400, 6600, 5/16” BB
6400, 6600, 7/16” BB
6450, 6465
6455 Double Drive
6550 Double Drive
6600, 6610, 3/8” BB
6600, 7/16” BB
800.368.7773
Lefthand
Knifehead
SCP015474
SCP083616
SCP083614
SCP011126
SCP011126
SCP011126
SCP011125
OEM
OEM
OEM
OEM
OEM
SCP083618
SCP083618
SCP013667
SCP014534
SCP014534
SCP014534
SCP011280
SCP011280
SCP011229
SCP011229
OEM
SCP011229
SCP011280
SCP011258
SCP014534
SCP014534
SCP014534
SCP015474
SCP014534
SCP015474
SCP015474
SCP015474
SCP083616
SCP011229
SCP011229
SCP083616
SCP083616
SCP011258
SCP011229
SCP011229
SCP014534
SCP014534
SCP011258
SCP011229
SCP014534
SCP081363
SCP011229
SCP011229
SCP011229
SCP014534
SCP014534
SCP014534
SCP014534
SCP011229
SCP011229
Guards
12mm 14mm 17mm 4mm 5mm
6mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP015475
SCP083617
SCP083615
SCP083617
SCP083617
SCP014535
SCP014535
SCP014535
SCP014535
SCH EasyCut II Kits
Mfg.
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Honey Bee
Honey Bee
Honey Bee
Honey Bee
Honey Bee
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
Type
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Platform, Draper
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Auger
Platform, Auger
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Model Description
Lefthand
Knifehead
6655, 6665
8100 Double Drive
8450, 8840, 8870, 7/16” BB
9300 Lap Double Drive
Draper
Draper, 8mm wear plates
Double Drive, 1/4” BB
Double Drive, 3/16” BB, 8mm wear plates
Series 3
#5, 3/8” BB
#5, 7/16” BB
#8, #38, #39
#8W
#9
#10
#11
#37
50 (Bushing Knifehead)
250, 350, 450 (Bearing Knifehead)
250, 350, 450 (Bushing Knifehead)
3700
485 (Ball Joint Knifehead)
710
720, 820, 1/2” BB
720, 820, 7/16” BB
820, 1/2” BB (Ball Joint Knifehead)
1207 (Bearing Knifehead)
1380, 1424 (K10)
1380, 1424 (K42)
1600 Double Drive (Bearing Knifehead)
78
160
130, 3/8” BB
130, 7/16” BB
220, 230 (Ball Joint Knifehead)
230, 240 (Needle Bearing)
930, 936
200 Series
600 Series HydraFlex
900 Series
Hart Carter, Pitman Drive
SCP014534
SCP014534
SCP015474
SCP083616
SCP083616
SCP083616
SCP083616
SCP083616
SCP013667
SCP014226
SCP014226
SCP014226
SCP014226
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
SCP083662
SCP083663
SCP083662
SCP083663
SCP011220
SCP011220
SCP011220
SCP015427
SCP015427
SCP011220
SCP011220
SCP015427
SCP011196
SCP011220
SCP015427
SCP011196
SCP011220
SCP015427
SCP011196
SCP011196
SCP015427
SCP015427
SCP015427
SCP011220
SCP015427
SCP011196
SCP011196
SCP011220
SCP015427
SCP081352
SCP011207
SCP015421
SCP011207
OEM
Guards
6mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
*
x
x
x
*
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP014535
SCP015475
SCP083617
SCP083617
SCP083617
SCP083617
SCP013668
SCP014227
SCP014227
SCP081378
www.sidist.com
57
SCH EasyCut II Kits
Mfg.
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
Kosch
Love
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F
M/F-Claas
M/F-Claas
M/F-White
M/F-White
M/F-White
M/F-White
M/F-White
M/F-Claas
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
Type
Platform, Rigid
Platform, Rigid
Platform, Rigid
Platform, Rigid
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Mower
Platform, Flex
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Auger
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Mower Cond.
Platform, Auger
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Draper
Model Description
55
55, Hart Carter, Pitman Drive
200 Series
900 Series
300 Double Drive (Bearing Knifehead)
300 Double Drive (Bushing Knifehead)
300, 1380,1424 (Bearing Knifehead)
580
580
800, 1/2” BB
800, 7/16” BB
800, 2250, 2270, 3/8” BB
830
880
890
2250
2270
2280
2320, 2420
2360
2420, 1/2” BB
4840
Love Bar
#41
#42
410
81
725
925
1880
220
655, 675, 775, 785
885
1859, 9100 Series
9224 Rotary
9850 (AGCO Manufactured)
35
200
775
785
3850
36, 44
8450, 8460
8560, 9520, 1/4” BB
8560, 9520, 3/8” BB
8920
9300
9330
8460
4000
920 Lap Double Drive
942 Double Drive
972
972 Double Drive
974
FD70
800.368.7773
Lefthand
Knifehead
SCP011207
OEM
SCP011207
SCP011207
SCP015427
SCP011196
SCP015427
OEM
OEM
SCP011220
SCP011220
SCP011220
SCP011220
SCP011220
SCP015427
SCP011220
SCP011220
SCP011196
SCP015427
SCP015428
SCP015427
OEM
OEM
OEM
OEM
OEM
OEM
SCP011263
SCP011263
OEM
OEM
SCP011188
SCP015428
OEM
SCP011255
SCP013997
OEM
OEM
SCP011220
SCP011188
SCP011222
OEM
SCP011125
SCP011255
SCP011255
SCP011255
SCP011255
SCP011255
SCP011125
SCP083669
SCP015428
SCP015428
SCP013667
SCP013667
SCP081373
SCP081379
Guards
6mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP081378
SCP011197
SCP081351
SCP081351
SCP013668
SCH EasyCut II Kits
Mfg.
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
Mccormick
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
Type
Platform, Draper
Platform, Flex
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Model Description
FD70 Double Drive
973
910
920
920 Double Drive
960
3000
5000, 5020
5010
7000
Mower, 7/16” BB
405
450, 455, 1/4” BB
450, 455, 3/8” BB
450, 455, 7/16” BB
451, 456, 1/2” BB
451, 456, 7/16” BB
451, 456, 1/4” BB
451, 456, 3/8” BB
467
469
472, 477, 478
474
488, 479
489, 3/8” BB
489, 7/16” BB
490
492, 3/8” BB
492, 7/16” BB
495, 1495
880
1496
1496 Double Drive
74C, S/N all HAJ & up to PNL018301
74C, S/N PNL018301 and after
740CF
94C, 8mm Plates
972
972 Double Drive
973
973 Double Drive
9750 Rotary
971
114 Double Drive
116, 1116
499, 1469, 1499 Double Drive
905
910, 7/16” BB
910 Double Drive
912 Double Drive
1100
1112 Double Drive
1114 Double Drive
1118 Double Drive
1465, 3/8” BB
Lefthand
Knifehead
SCP081379
SCP015428
SCP015428
SCP015428
SCP015428
SCP015428
OEM
SCP013667
SCP013667
SCP015428
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
SCP011219
SCP011219
SCP011192
SCP011191
SCP011192
SCP011191
SCP011191
SCP011219
SCP011191
SCP011191
SCP011224
OEM
OEM
OEM
SCP011213
SCP083815
SCP002401
SCP014226
SCP011213
SCP011213
SCP011213
SCP011213
SCP011255
SCP011213
SCP083678
SCP011276
SCP011276
OEM
OEM
SCP011276
SCP011276
SCP011276
SCP011276
SCP011276
SCP011276
SCP011276
SCP011191
Guards
6mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP081380
SCP081351
OEM
SCP011214
SCP083816
SCP011214
SCP083679
SCP011277
OEM
SCP011277
SCP011277
SCP011277
SCP011277
SCP011277
www.sidist.com
59
SCH EasyCut II Kits
Mfg.
New Holland
New Holland
New Holland
New Holland
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
Oliver
Oliver
Oliver
Owatonna
Owatonna
Owatonna
Owatonna
Owatonna
Owatonna
Owatonna
Renn
Rowse
Rowse
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Vicon
White
White
Type
Windrower
Windrower
Windrower
Windrower
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Mower
Platform, Flex
Platform, Flex
Mower
Mower Cond.
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Mower
Mower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Platform, Flex
Windrower
Model Description
1475, 3/8” BB
1475, 2450, 2550, 2300 Double Drive
2216 Double Drive
2326 Double Drive
#40
251, 254
252
522, 1/2” BB
522, 3/8” BB
522, 7/16” BB
290
299
509
5107
5109
5112
5114
711
713, 813 Uni Harvester
715 Uni Harvester
716S
815
82
525
7600
20, Pitman Drive
200
235
260, 270, 280
265, 275, 285
280
280, 7/8-18 Threaded Knifehead
2000
Mower, 3/8” BB
Mower, 7/16” BB
#10
400
400
2800
4018
4022
4025
4025 Double Drive
4030
4030 Double Drive
4400
722
Kwik Cut
6200
800.368.7773
Lefthand
Knifehead
SCP083614
SCP083614
SCP083614
SCP083614
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
SCP011186
OEM
OEM
SCP011186
SCP011186
SCP011282
OEM
OEM
SCP011282
SCP011282
OEM
OEM
OEM
OEM
SCP011280
SCP011280
SCP011280
SCP011280
SCP015428
SCP011281
SCP011220
OEM
OEM
SCP011193
SCP011217
SCP011193
OEM
OEM
OEM
OEM
OEM
SCP083677
SCP083677
SCP011217
SCP011188
OEM
SCP011188
Guards
6mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP083615
SCP083615
SCP083615
OEM
SCP083680
SCH EasyCut II Parts
Coarse Section
7 Serrations/Inch
Fine Section
10 Serrations/Inch
SCH Sections
Product ID
Description
SCP110978
SCP080502
Section, SCH, Coarse, Box of 25 (standard on all SCH kits)
Section, SCH, Coarse, 10-Pack (includes 10 sections & hardware)
$39.92
$21.61
SCP110961
SCP080504
Section, SCH, Fine, Box of 25 (wheat or grass only applications)
Section, SCH, Fine, 10-Pack (includes 10 sections & hardware)
$39.92
$21.61
SCP080503
Hardware, SCH Bolt & Nut 50-Pack (hardware for 25 SCH sections)
$14.31
SCP013935
Half Section, SCH, Single
(1)
(2)
•
•
•
•
•
Number
of
Sections
$2.22
Replacement OEM Sections
Product ID
Product Description
SCP010995
SCP011012
Section, John Deere, Coarse (replaces H160251, H168316, H207930), Box of 25
Section, John Deere, Fine (replaces H136807, H207929), Box of 25
$36.77
$36.77
SCP010999
SCP010997
Section, Case-IH, Coarse (replaces 112074A1, 826720C3), Box of 25
Section, Case-IH, Fine (replaces 826720C3, B93333D), Box of 25
$36.77
$36.77
SCP011003
SCP011001
Section, AGCO, Coarse (replaces 71135135), Box of 25
Section, AGCO, Fine (replaces 71135135), Box of 25
$36.77
$36.77
SCP011007
SCP011005
Section, New Holland, Coarse (replaces 848091), Box of 25
Section, New Holland, Fine (replaces 848091), Box of 25
Coarse sections (7 serrations per inch) are recommended for soybeans and alfalfa.
Fine sections (10 serrations per inch) are recommended for wheat and grasses.
$36.77
$36.77
SCH Knife Assemblies
Starting With A HALF Section
Knife
Assembly
Length
Price
Original Knife Replacement
Assembly
Knife Assembly
Product ID (1) Product ID (2)
Price
SCH Knife Assemblies
Starting With A FULL Section
Price
Knife
Number Original Knife Replacement
Assembly
of
Assembly
Knife Assembly
Length Sections Product ID (3) Product ID (4)
Price
7’
1/2 + 30
SCB210300
SCB210301
$123.95
7’
30
SCB220300
SCB220301
8’
1/2 + 34
SCB210340
SCB210341
$140.47
8’
34
SCB220340
SCB220341
$123.95
$140.47
9’
1/2 + 38
SCB210380
SCB210381
$157.00
9’
38
SCB220380
SCB220381
$157.00
10’
1/2 + 42
SCB210420
SCB210421
$173.53
10’
42
SCB220420
SCB220421
$173.53
11’
1/2 + 46
SCB210460
SCB210461
$190.06
11’
46
SCB220460
SCB220461
$190.06
12’
1/2 + 50
SCB210500
SCB210501
$206.58
12’
50
SCB220500
SCB220501
$206.58
13’
1/2 + 54
SCB210540
SCB210541
$223.10
13’
54
SCB220540
SCB220541
$223.10
15’
1/2 + 62
SCB210620
SCB210621
$256.15
15’
62
SCB220620
SCB220621
$256.15
16’
1/2 + 66
SCB210660
SCB210661
$272.69
16’
66
SCB220660
SCB220661
$272.69
17’
1/2 + 70
SCB210700
SCB210701
$289.21
17’
70
SCB220700
SCB220701
$289.21
18’
1/2 + 74
SCB210740
SCB210741
$305.73
18’
74
SCB220740
SCB220741
$305.73
20’
1/2 + 82
SCB210820
SCB210821
$338.78
20’
82
SCB220820
SCB220821
$338.78
22’
1/2 + 90
SCB210900
SCB210901
$371.84
22’
90
SCB220900
SCB220901
$371.84
24’
1/2 + 98
SCB210980
SCB210981
$404.89
24’
98
SCB220980
SCB220981
$404.89
25’
1/2 + 102
SCB211020
SCB211021
$421.41
25’
102
SCB221020
SCB221021
$421.41
27’
1/2 + 110
SCB211100
SCB211101
$454.47
27’
110
SCB221100
SCB221101
$454.47
30’
1/2 + 122
SCB211220
SCB211221
$504.04
30’
122
SCB221220
SCB221221
$504.04
35’
1/2 + 142
SCB211420
SCB211421
$586.67
35’
142
SCB221420
SCB221421
$586.67
36’
1/2 + 146
SCB211460
SCB211461
$603.20
36’
146
SCB221460
SCB221461
$603.20
(3)
(4)
(1) & (3) Original knife assembly has the knife sections installed the same way as the original knife assembly.
(2) & (4) Replacement knife assembly has the knife sections installed the opposite way as the original knife assembly.
If unsure how the knife assembly starts, order the knife with a half section because the half section can be easily
removed.
Some knife assemblies may need cut to length to match original knife.
Please specify coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections.
Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses.
www.sidist.com
61
SCH Knife Connector Kits & Knifeback
SCH EasyCut II 2-Point Standard Guard
Price
SCP083607 Connector bar with 1 extra bolt & insert
$17.14
Connector bar with 3 extra sections, 1 extra bolt
SCP080000
$21.69
& insert
SCH knifeback (without sections) per foot,
N/A
$6.04
specfiy exact length
Price
SCP016538 12mm 2-point standard guard
$19.30
$19.30
$19.30
SCH EasyCut II 2-Point Open Top Guard
Knife Connector Kits
Knifeback
SCH Wear Plates
Price
SCP017011 Wear plate, 4mm, 2-hole, (brown)
$3.24
SCP017012 Wear plate, 5mm, 2-hole, (blue)
$3.89
SCP017013 Wear plate, 6mm, 2-hole, (black)
$4.52
$3.69
$4.19
$4.70
$4.07
$4.52
$5.03
SCP010753 Wear plate, 5mm, 4-hole, double sided, (blue)
$5.79
SCP010754 Wear plate, 6mm, 4-hole, double sided, (black)
$6.30
Note: Number stamped on top of wear plate indicates thickness in
millimeters. Color also indicates thickness. See above.
SCH Skid Plates
SCP016518 14mm 2-point open top guard
$32.04
$32.04
Price
17mm 2-point head guard, for
SCP017573
$35.10
Case-IH 1020*
*For most other models an open top guard can be
used instead of a head guard.
SCH EasyCut II 3-Point Standard Guard
Price
$36.35
$36.35
$36.35
flatter +
wider ridge
New &
Improved!
EasyCut II
Guards
Price
blunt guard causes
$12.75
square hole
All SCH Guards Are Color Coded & Numbered
SCH Hardware Kits for Knifeheads
$32.04
SCH EasyCut II 2-Point Head Guard
Wear Plates
Skid Plate, fits model year 2006 and after,
MacDon 973, 974, FD60, FD70, D60; Case-IH
SCP082817 2052, 2062, 2152, 2162;
Required when installing SCH EasyCut on these
headers.
Price
Guard Size Paint Color
Price
12mm
Gloss black
Number Identification
Stamped with 5-digit product ID or a “2” on the bottom
SCP083601 Parts package, for knifeheads with top strap
$4.14
14mm
Burnt orange Stamped with 5-digit product ID or a “4” on the bottom
SCP083784 Parts package, for knifeheads without top strap
$4.14
17mm
Light gray
Stamped with 5-digit product ID or a “7” on the bottom
SCH Croplifters
• Improved Positioning
• Improved Wear Resistance
• Simplified Mounting
800.368.7773
Product ID
Description
SCP013549
SCH AS-100/5 croplifter; guards that are 5.4 - 5.8” long
$21.64
Price
SCP016445
SCH ASK-100 croplifter; guards that are 5.7 - 6.0” long (ECI & II)
$26.64
SCP016587
SCH ASK-120 croplifter; guards that are 6.1 - 6.4” long
$26.64
SCP016589
SCH ASK-127 croplifter; guards that are 6.5 - 6.7” long
$26.64
SCP010658
SCH spool fastener, required to install croplifters
$1.60
Note: Croplifters for other guards not listed above may be available. Call with measurement from tip of guard point
to the center of the guard bolt hole for correct fit.
SCH Double Drive Parts
SCP010045
SCP010071
SCP016519
SCP016520
SCP016469
SCP013666
SCP013961
SCP016222
SCP016223
Center Guard
Bolt, countersunk, 6mm x 16mm
Bolt, 6mm x 25mm, for knifehead
12mm 2-point open top center guard
Overlap strap
Nut, flange, 6mm
Section, countersunk, fine
Section, countersunk, coarse
Price
$0.22
$0.35
$32.04
$32.04
$32.04
$22.56
$0.15
$2.87
$2.87
Overlap Strap
SCH Knife Hardware
Knife Hardware
Product ID
Description
Price
SCP010931
Bolt, 6mm x 16mm, for section
$0.29
SCP010067
Bolt, 6mm x 18mm, for knifehead & splice
$0.26
SCP083610
$0.30
SCP010071
$0.35
$0.38
SCP010072
SCP013961
Nut, flange, 6mm
$0.15
SCP083611
Screw, 1/4” x 1” flat head, for H/C 2 piece head
$0.33
SCP083612
Nut, 1/4”-20 center lock, for H/C 2 piece head
$0.11
SCH Inserts
Splice Kit
Price
SCP010937 Insert, for splice kit
$0.70
SCP010941 Insert, for knifehead
$0.64
Knifehead
SCH Guard Hardware
Product ID
Guard Tip
Ball
Description
Price
Product ID
Description
Price
HDW210118 HHCS, 3/8”-16 x 1-1/4”
$0.17
HDW210221
HHCS, 10-1.5mm x 40mm
$0.20
HDW210117 HHCS, 3/8”-16 x 1-1/2”
$0.18
HDW210222
$0.28
HDW210119 HHCS, 3/8”-16 x 1-3/4”
$0.20
HDW210223
$0.36
HDW210120 HHCS, 3/8”-16 x 2”
$0.22
HDW210225
$0.48
HDW210122 HHCS, 3/8”-16 x 2-1/4”
$0.26
HDW210224
$0.60
HDW210121 HHCS, 3/8”-16 x 2-1/2”
$0.30
HDW220002
Carriage bolt, 10-1.5mm x 40mm
$0.40
HDW210124 HHCS, 3/8”-16 x 3”
$0.32
HDW220015
$0.45
HDW210159 Nut, serrated flange, 3/8”-16
$0.06
HDW220016
$0.50
HDW210184 Washer, USS flat, 3/8”
$0.03
HDW220027
$0.60
HDW210183 Washer, SAE flat, 3/8”
$0.02
HDW220003
Nut, flange, 10-1.5mm
$0.10
SCH Skid Plates
16mm Nut
SCH Skid Plates
Machined Washer
SCP082817
SCH Miscellaneous Parts
Price
SCP010050 Nut, 16mm for ball joint knifeheads
$2.61
SCP010660 Washer, for ball joint knifeheads
SCP083613 Bottom strap for H/C 2-piece head
SCP010630 Guard tip ball
Skid Plate, fits model year
2006 and after, MacDon 973,
974, FD60, FD70, D60; Case-IH
2052, 2062, 2152, 2162;
Required when installing SCH
EasyCut on these headers.
Price
$12.75
$1.91
$45.14
$1.21
www.sidist.com
63
SCH EasyCut II Knifeheads
AGCO
SCP081363
SCP013997
SCP011222
SCP011195
SCP011252
SCP011279
SCP011266
Price
AGCO, 5100 draper,
LH
AGCO, 300 series
flex, late model, LH
400 series rigid, LH
500, 800, 8000
series flex; 7/8” tie
rod style, LH
Note: Replaces OEM
knifeheads with
adjustable register
AGCO, 300 series
flex, late model, RH
400 series rigid, RH
500, 800, 8000
series flex; 3/4” tie
rod style, LH
Note: Replaces OEM
knifeheads with
adjustable register
AGCO, 300 series
flex, early model
bushing style, 300 &
700 rigid, LH
AGCO, Hart Carter
Series 2 floating
cutter bar, LH
AGCO, Hiniker
floating cutter bar,
LH
AGCO, crank arm
style, rigid, LH
$146.82
$107.32
$107.32
SCP081373
SCP081381
SCP083815
SCP083816
SCP011213
SCP011214
SCP083792
SCP083793
SCP014266
Price
Case-IH, 820, LH
$117.20
Case-IH, 810, 5-1/4”
from center of
knifehead bearing
to center of first full
section, LH
Case-IH, 810, 4-1/4”
from center of
knifehead bearing
section, LH
$117.20
$117.20
SCP011185
Case-IH, 230, 1190,
4000, 5000, LH
$146.82
SCP011259
Case-IH, 990, LH
$117.20
SCP011186
Case-IH, 1490, 1590,
LH
$146.82
SCP015474
$117.20
SCP015475
$146.82
Case-IH, 8220, 8330,
8340, 8360, 8370,
8820, 8830, SC414,
LH
Case-IH, 8220, 8330,
8340, 8360, 8370,
8820, 8830, SC414,
RH
$94.98
$94.98
Claas
$117.20
Price
SCP016326
$192.70
SCP015949
Claas, bearing
for SCP016326
knifehead
$139.75
SCP011125
Claas 642, 8450,
8460, S450, 15’ and
less, bearing not
included, LH
$132.01
SCP011127
Claas, bearing
for SCP011125
knifehead
$120.42
SCP011252
Claas, Hart Carter
Series 2 floating
cutter bar, LH
$117.20
$94.98
Case-IH, 2062,
double drive, RH
Case-IH, 2020, S/N
CBJ021301 and
after, LH
Case-IH, 2020, S/N
CBJ021301 and
after, RH
Case-IH, 2020, S/N
all “HAJ” & up to
CBJ021301, LH
Case-IH, 2020, S/N
all “HAJ” & up to
CBJ021301, RH
Case-IH, 2020,
double drive early
style, LH
Case-IH, 2020,
double drive early
style, RH
$94.98
$94.98
$94.98
$94.98
$94.98
$94.98
Gehl
SCP083618
Gehl, 1070, 1090, LH
SCP011229
Gehl, 2230, 2650,
2850, LH
$94.98
$146.82
800.368.7773
Price
Claas, 8450, 8460,
20’ and more,
bearing not
included, LH
$253.98
Case-IH, 2062, LH
Case-IH, 1010, 1020,
LH
SCP011227
$117.20
Case-IH
Case-IH, 3020, LH
SCP011226
SCP011252
SCP002401
Case-IH - Continued
Price
$94.98
$102.39
John Deere - Continued
Hesston
SCP081363
SCP014534
SCP014535
SCP083616
SCP083617
SCP011229
SCP011258
SCP015474
SCP015475
Price
Hesston, 5200
draper, LH
Hesston, 500, 520,
1070, 1071, 1085,
1090, 1091, 1095,
1110, 1150, 6450,
6455, 6465, 6550,
6655, 6665, LH
Hesston, 1014+2,
6450, 6455, 6550,
6655, 6665, double
drives, RH
Hesston, 1170,
1275, 1160, 8400,
8450, 8840, 8870 LH
Hesston, 1170,
1275, 8400, 8450,
8840, 8870, double
drives, RH
Hesston, 320, 420,
1014, 1260, 1265,
6400, 6600, 6610,
LH
Hesston, 600, 1010,
PT-7, PT-10, LH
Hesston, 1120,
1160, 8100, 8200,
8400, LH
Hesston, 1120,
1160, 8100, 8200,
8400, RH
$146.82
SCP015427
$94.98
$94.98
SCP081378
$94.98
SCP011220
$94.98
$102.39
$94.98
$94.98
SCP014226
SCP014227
Price
Honey Bee, model
year 2002-current, LH
Honey Bee, model
year 2002-current,
double drive, RH
SCP081352
SCP015421
SCP011207
SCP011121
SCP011122
SCP011196
SCP011197
John Deere, 900
series draper, LH
John Deere, 600
series flex, LH
John Deere, 200
& 900 series flex &
rigid, LH
John Deere,
crank arm style,
rigid, bearing not
included, LH
John Deere, bearing
for SCP011121
knifehead
John Deere, 130,
300, 1207, 1209,
1219, 1380, 1424,
bushing style (serial
#285000-), LH
John Deere, 300
double drives,
bushing style (serial
#285000-), RH
$146.82
$94.98
SCP015428
John Deere 2360,
LH
$94.98
Lexion
SCP002412
Price
Lexion, F535, F540,
LH
Lexion, F535, F540,
RH
$253.98
$253.98
MacDon
Price
$146.82
SCP081379
MacDon, FD70, LH
$94.98
$146.82
SCP081380
MacDon, FD70, RH
$94.98
SCP081373
MacDon, 974, LH
$94.98
John Deere
$94.98
John Deere, 250,
350, 450, 3700, LH
Honey Bee
$94.98
SCP083663
SCP002413
$94.98
Price
John Deere, 130,
160, 230, 300, 710,
720, 820, 890, 895,
1207, 1209, 1219,
1380, 1424, 1600,
2280, 2320, 2420,
needle bearing
style, LH
John Deere, 300,
890, 895, 1600
double drives,
needle bearing
style, RH
John Deere, 78,
220, 230, 485, 710,
800, 830, 880, 1207,
1209, 2250, 2270,
ball joint style
(serial # -285000),
LH
Price
$146.82
$146.82
SCP081381
SCP013667
SCP013668
$146.82
SCP015428
$94.98
SCP081351
$151.23
MacDon, 974,
double drive, RH
MacDon, 972, 5000,
5010, 5020, LH
MacDon, 972,
double drive, RH
MacDon, 910, 920
lap double drive,
942, 960, 973, 7000,
LH
MacDon, 920 lap
double drive, 942
double drive, RH
$94.98
$102.39
$102.39
$94.98
$94.98
SCP015427
MacDon, 920, LH
$94.98
SCP081378
MacDon, 920
double drive, RH
$94.98
$102.39
$102.39
www.sidist.com
65
Massey-Ferguson
SCP011255
SCP016326
Price
Massey-Ferguson,
8560, 8920, 9300,
9520, 9750, Rotary,
LH
Massey-Ferguson,
8450, 8460, 20’ and
more, bearing not
included, LH
SCP015949
Massey-Ferguson,
bearing for
SCP016326
knifehead
SCP011125
Massey-Ferguson,
642, 8450, 8460,
S450, 15’ and
less, bearing not
included, LH
SCP011127
SCP011211
SCP011212
SCP011263
SCP011188
SCP081363
Massey-Ferguson,
bearing for
SCP011125
knifehead
Massey-Ferguson,
Hart Carter &
Hiniker floating
cutter bar,
knifehead bushing
at 0-degree angle,
LH
Note: For
replacement only.
New kits will reuse
the OEM knifehead.
Massey-Ferguson,
Hart Carter &
Hiniker floating
cutter bar,
knifehead bushing
at 5-degree angle,
LH
Note: For
replacement only.
New kits will reuse
the OEM knifehead.
Massey-Ferguson,
725, 925, LH
Massey-Ferguson,
655, 675, 775, 785,
LH
Massey-Ferguson,
220 windrower, LH
$132.01
$192.70
$139.75
$120.42
SCP083815
SCP083816
$146.82
Price
New Holland, 74C
S/N PNL018301
and after, double
drives, LH
New Holland, 74C
S/N PNL018301 and
after, RH
$94.98
SCP011192
New Holland, 472,
477, 478, 479, 488,
LH
$94.98
SCP083678
New Holland, 114
windrower, LH
$111.03
SCP083679
New Holland, 114
windrower, RH
$111.03
SCP011276
New Holland, 116,
910, 912, 1100,
1112, 1114, 1116,
1118, LH
New Holland, 116,
910, 912, 1112,
1114, 1116, 1118,
double drives, RH
$94.98
SCP011224
New Holland, 495,
1495, LH
$94.98
New Holland, 1475,
2216, 2300, 2326,
2450, 2550, LH
New Holland, 1475,
2216, 2300, 2326,
2450, 2550, double
drives, RH
SCP011280
$117.20
SCP011281
$94.98
Price
Owatonna, 200,
206, 217, 235, 260,
265, 270, 275, 285,
7/8-18 threads per
inch, LH
Owatonna, 260,
280, 7/8-14 threads
per inch, LH
$102.39
$102.39
Versatile
Price
SCP083677
Versatile, 4030, LH
$94.98
SCP083680
Versatile, 4030,
double drive, RH
$94.98
$94.98
SCP011193
$94.98
SCP011217
800.368.7773
$94.98
Owatonna
New Holland, 74C
S/N all “HAJ” & up
to PNL018301; 970,
971, 972, 973, LH
New Holland, 74C
S/N all “HAJ” & up
to PNL018301;
970, 971, 972, 973,
double drives, RH
$86.34
New Holland, 461,
467, 469, 490, LH
$146.82
Price
$86.34
SCP011219
SCP083615
$146.82
$94.98
New Holland, 474,
489, 492, 1465, LH
SCP083614
$86.34
$94.98
SCP011191
SCP011277
SCP011214
$132.01
New Holland
SCP011213
New Holland - Continued
Versatile, 10, 400,
3-1/2” from center
of knifehead
bearing to center of
first full section, LH
Versatile, 400, 4400,
3” from center of
knifehead bearing
section, LH
$86.34
$86.34
SCH Pro-Drive Knife Drive
Comparison of SCH Pro-Drive to conventional cutterbar knife drives
Almost all conventional cutterbar knife drives in combine harvesters have a knife stroke of between
3” and 3-1/3”. When a crop that is difficult to cut loads the cutting knife, the knife rarely travels the
full length of the stroke. A considerable amount of the stroke is lost in deflecting gear housings,
gear brackets, ball and socket joints and installed wobble boxes. Drives have been tested in which
the stroke has fallen to 2-1/2” under load. The knocking and shaking this produces in the cutterbar is
known to almost every expert in the field. It gives the impression that dull sections are being used.
The SCH Pro-Drive high performance cutterbar knife drive eliminates all these problems. Built using
planetary gears, these drives produce an absolutely linear knife movement when compared with
wobble boxes or other oscillating and pendulum drives. The gears are in exact alignment with
the knife. This means there is no need for reversing or oscillating levers, which causes the loss of
stroke in other drives. The full length of the stroke generated by the planetary gears is transmitted
to the knife. The SCH Pro-Drive high performance knife drives can be driven either horizontally or
vertically.
Advantages of SCH Pro-Drive to conventional cutterbar knife drives
The SCH Pro-Drive high performance knife drive in conjunction with the uniquely simple SCH
cutterbar system achieve cutting performances that had never been considered possible in the
past, particularly in the case of self-propelled harvesters. The Pro-Drive planetary gear system
is in rotation at all times. Therefore, there are no dead spots as in wobble or crank drives where
arms and levers have to come to a full stop twice per revolution to change direction. These
advantages mean that a change to a SCH Pro-Drive knife drive and cutterbar system will pay for
itself in just a short time.
The problem most knife
drives have, is the loss of
stroke length and force.
This is addressed with the
SCH ProDrive.
• Higher ground travel cutting speeds
• Improved material flow with less reel work
• Low maintenance
• Minimal wear and easy service
• Less plugging with “reverse gear” not used as often
• Longer harvesting days, crops can be cut when there is dew on the ground
• Very easy knife change, remove two bolts for easy in-the-field changes
• Grease lubricated, eliminates the possibility of oil loss due to seal failure
Changing knives with the SCH Pro-Drive
The engineers have devised a brilliant method
of attaching the knifehead to the drive that is a major advancement. Designed as a
trapezoidal claw, the connection is easy and accurate. No bolts to line up, no bearings to
adjust or shim, no fear that dirt might get into bearings, bushings, etc. Makes changing
knives even in the field a breeze.
Overstroke in the SCH Pro-Drive. The special construction of the planetary drive results
in a precisely defined knife stroke. With a stroke of 85mm or 3-1/3” there is an overstroke of
4.4mm or 1/6” to either side.
www.sidist.com
67
SCH Pro-Drive Knife Drive
SCH Pro-Drive
SCP014869
SCP012457
SCP012466
SCP012472
Vertical Pro-Drive
SCH Pro-Drive 85V, vertical, 85mm (3.3”) stroke
SCH Pro-Drive 85H, horizontal, 85mm (3.3”) stroke
SCH Pro-Drive 130H, horizontal, 130mm (5.1”) stroke
Replaces John Deere #DE19785 on 620F, 622F, 625F, 630F and 635F flex platforms &
SCP014714
622R, 625R and 630R rigid platforms.
Note: Does not include pulley and knifehead bearing block assembly.
SCP014697 Replaces John Deere #DE19786 on 925D, 930D, 936D draper platforms.
SCP014811 Replaces drive on AGCO 8200.
Warranty: SCH Pro-Drives have a 1 year warranty on parts and labor from date in service.
SCP012775
SCP083744
SCP012780
SCP012782
SCP012785
SCP012788
SCP012802
SCP012579
Case-IH Flex Mounting Bracket
SCH Pulleys for Vertical Pro-Drive
Pulley, 6-bolt, 180mm
Hub, required if replacing keyed pulley with 6-bolt pulley
SCH Adapters for Horizontal Pro-Drive
SCP012573
SCP012563
SCP012564
Adapter, for 25.4mm (1”) shaft
Adapter, for 31.7mm (1-1/4”) shaft
Adapter, for 32.0mm shaft
SCH Knifeheads for Pro-Drive With SCH Cutter Bar
SCP083748
SCP011339
SCP011340
SCP011341
Knifehead, Massey-White 9750
Knifehead, John Deere flex and rigid
Knifehead, Case-IH flex and rigid
Knifehead, AGCO flex and rigid
SCH Knifeheads for Pro-Drive With OEM Cutter Bar
John Deere Flex Mounting Bracket
SCP011236
SCP081353
SCP081354
SCP083629
SCP081355
SCP081357
Clamp, used to manufacture custom knifehead
Clamp, AGCO 300-800 series, 3/4”
Clamp, AGCO 300-800 series, 7/8”
Knifehead, Claas
Knifehead, Case-IH 3” system
Knifehead, John Deere flex and rigid
Pro-Drive Knifeheads
Bearing Block Assembly
800.368.7773
SCP010099
SCP010258
SCP012543
SCP012766
SCP014739
SCP014742
SCP014230
SCP082702
SCP082705
SCP083625
SCP083626
SCP083627
SCP083628
SCH Pro-Drive Miscellaneous Parts
Bolt, 10mm x 35mm allen head
Bearing, for knifehead
Nylon ring, for Pro-Drive knifehead
Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; greaseable
Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; sealed bearing
Bearing block assembly, AGCO 8200 (#71416424), JD Early 900D (#DE19373)
Bearing block assembly, JD 600F, 600R, JD Late 900D (#DE19294)
U-bracket, for John Deere flex mount
U-bracket, for AGCO flex mount
Mounting plate, used to manufacture custom bracket
Clevis, 16mm, for John Deere late 900 series
Clevis, 12mm, for John Deere early 900 series
Clevis, 1/2”, for John Deere 200 series
Price
$1,625.00
$1,825.00
$1,625.00
$1,625.00
$1,725.00
$1,725.00
$1,725.00
Price
$152.55
$152.55
$152.55
$152.55
$152.55
$152.55
$152.55
$45.26
Price
$68.01
$68.01
$68.01
Price
$146.82
$146.82
$146.82
$146.82
Price
$45.14
$60.38
$60.38
$146.82
$146.82
$146.82
Price
$0.50
$95.29
$8.84
$151.23
$151.23
$229.50
$189.00
$125.00
$125.00
$68.01
$29.56
$29.56
$29.56
SCH Pro-Drive Kits
All SCH Pro-Drive Conversion Kits Include:
• 1-SCH Pro-Drive, vertical, 85mm (3.3”) stroke
• 1-mounting bracket for SCH Pro-Drive
• 1-drive pulley for SCH Pro-Drive
• 1-extra nylon ring for knifehead
• 1-knifehead
Warranty: SCH Pro-Drives have a 1 year warranty
on parts and labor from date in service.
John Deere 200-900 Series Headers
With SCH SCH Cutter
With JD
JD Cutter
Description
Cutter Bar Bar Price
Cutter Bar Bar Price
Flex, 4420, 6620 & 7720 through 1985 with 1/2” clevis*
SCK100100
$2,150.00
SCK100110 $2,150.00
Flex, 9000 Series with 1/2” clevis*
Flex, 6620 & 7720 after 1985 with 1/2” clevis*
SCK100101
$2,150.00
SCK100111 $2,150.00
Flex, 8820 with 1/2” clevis*
Flex, 4420, 6620 & 7720 through 1985 with 12mm clevis*
SCK100102
$2,150.00
SCK100112 $2,150.00
Flex, 9000 Series with 12mm clevis*
Flex, 6620 & 7720 after 1985 with 12mm clevis*
SCK100103
$2,150.00
SCK100113 $2,150.00
Flex 8820 with 12mm clevis*
Flex, 4420, 6620 & 7720 through 1985 with 16mm clevis*
SCK100104
$2,150.00
SCK100114 $2,150.00
Flex, 9000 Series with 16mm clevis*
Flex, 6620 & 7720 after 1985 with 16mm clevis*
SCK100105
$2,150.00
SCK100115 $2,150.00
Flex, 8820 with 16mm clevis*
Rigid, 4420, 6620 & 7720 through 1985
SCK100106
$2,100.00
SCK100116 $2,100.00
Rigid, 9000 Series
Rigid, 6620 & 7720 after 1985
SCK100107
$2,100.00
SCK100117 $2,100.00
Rigid, 8820
*The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring
Size of the Bolt
in the Clevis
Case-IH 1010, 1020 Series Headers
With SCH
SCH Cutter
With CIH
CIH Cutter
Description
Cutter Bar
Bar Price
Cutter Bar
Bar Price
SCK100130
$2,150.00 Flex, 1020, greaseable wobble box, S/N JJC0215000 and lower
SCK100140
$2,150.00
SCK100131
$2,150.00 Fex, 1020, oil bath wobble box, S/N JJC0215001 - JJC0323604
SCK100141
$2,150.00
SCK100132
$2,150.00 Flex 1020, oil bath wobble box, S/N JJC0323605 and up; CBJ023001 and up
SCK100142
$2,150.00
SCK100133
$2,100.00 Rigid, 1010
SCK100143
$2,100.00
Note: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will be
added to the above kit price and credited back if a runner is returned in useable condition.
AGCO 300-8000 Series Headers
With SCH
SCH Cutter
Description
Cutter Bar
Bar Price
SCK100150
$2,150.00 Flex, 300-8000 Series
Note: Please specify the tie rod bolt size (3/4” or 7/8”) with AGCO cutter bar.
Massey-White 9750 Series Headers
With AGCO
Cutter Bar
SCK100155
With SCH
SCH Cutter
With M/F
Description
Cutter Bar
Bar Price
Cutter Bar
SCK100160
$2,150.00 Flex, 9750 series
SCK100162
Note: Knifehead for Massey-White cutting system is not available. A knifehead clamp is provided that must be welded to original knifehead strap.
AGCO Cutter
Bar Price
$2,100.00
M/F Cutter
Bar Price
$2,100.00
www.sidist.com
69
John Deere OEM
Replacement Cutting Parts
Rasspe OEM Replacement Sectional Knife Assemblies
John Deere 200 & 900 Series with 3” Knife Sections
Product ID
Description
RSP052094
Knifehead, John Deere 200 & 900 series, replaces AH121075, KXE10217
Price
RSP080019
Knife Assembly, John Deere 218, 918, w/ knifehead, 11-SPI sections
$59.50
$293.80
RSP080020
$316.08
RSP080021
$336.55
$356.97
RSP080022
RSP080023
$385.43
RSP080024
$434.80
RSP080040
Connector Kit, John Deere 200 & 900 series, 11-SPI sections
$22.50
RSP080044
$293.80
RSP080045
$316.08
RSP080046
$336.55
RSP080047
$356.97
RSP080048
$385.43
RSP080049
$434.80
RSP080057
Connector Kit, John Deere 200 & 900 series, 7-SPI sections
$22.50
Coarse (7-SPI) is recommended for soybeans and alfalfa; fine (11-SPI) is recommended for wheat and grasses.
Rasspe OEM Replacement Sectional Knife Assemblies
John Deere 600 Series with 4” Knife Sections
• UPS Shippable
• Hardware is included
• OEM quality parts
• Available with Coarse or Fine
Sections
Product ID
Description
RSP002559
Knifehead, John Deere 600 series, replaces AH220051
Price
$82.50
RSP080059
Knife Assembly, John Deere 620, w/o knifehead, 14-SPI sections
$368.55
RSP080060
$467.75
RSP080061
$581.17
RSP080062
$666.17
RSP080076
Connector Kit, John Deere 600 series, 14-SPI sections
RSP080084
$32.50
$368.55
RSP080085
$467.75
RSP080086
$581.17
RSP080087
$666.17
RSP080094
Connector Kit, John Deere 600 series, 7-SPI sections
$32.50
Coarse (7-SPI) is recommended for soybeans and alfalfa; fine (14-SPI) is recommended for wheat and grasses.
Rasspe OEM 3” Replacement Sections
OEM
Product ID
Part #
Description
Rasspe OEM 4” Replacement Sections
Price
SCP010995
Box of 25, JD 3” Coarse
Section, 7 serrations
H160251,
per inch
H168316,
$36.77
John Deere, 200, 900
H207930
series with 3” cutting
system
SCP011012
Box of 25, JD 3” Fine
H136807, per inch
H207929 John Deere, 200, 900
series with 3” cutting
system
800.368.7773
$36.77
Product ID
OEM
Part #
RSP080010
Box of 25, JD 4”
Coarse Section, 7
serrations per inch
John Deere, 900
H163131
draper, 600 draper,
600 flex & rigid, 600
flex draper with 4”
cutting system
RSP080011
Box of 25, JD 4” Fine
per inch
John Deere, 900
H153329
$56.25
draper, 600 draper,
600 flex & rigid, 600
flex draper with 4”
cutting system
Description
Price
$56.25
John Deere OEM
Replacement Guards
Product ID OEM #
Rasspe OEM Replacement Guards
Description
Price
RSP133981
Guard, 3-point, long-short-long, 4” standard blunt point, double
H213398
hardened
H229537
John Deere, 600 series flex & flex draper
$15.85
RSP135071
Guard, 3-point, short-long-short, 4” standard blunt point,
H213507
double hardened
H229538
John Deere 600 series flex & flex draper
$15.85
Product ID OEM #
Description
Price
RSP187021
Guard, 3-point, long-short-long, 4” no-till blunt point, double
hardened
H218702
John Deere 600 series flex headers; for no-till, guard doesn’t
have a cross bar
$15.75
RSP187011
H218701
Guard, 3-point, short-long-short, 4” no-till blunt point, double
hardened
John Deere 600 series flex headers; for no-till, guard doesn’t
have a cross bar
$15.75
Product ID OEM #
Description
Price
RSP134051
H213405 Guard, 3-point, long-short-long, 4” long point, double hardened
H229539 John Deere, 600 series rigid & draper; 900 series draper
$15.95
RSP135081
Guard, 3-point, short-long-short, 4” long point, double
H213508
hardened
H229540
John Deere, 600 series rigid & draper; 900 series draper
$15.95
Product ID OEM #
RSP187030
Description
Price
Guard, 3-point, long-long-long, non-clog, 4”
John Deere, 600 series rigid, flex and draper; 900 series draper
H218703
Used in conditions where crop gets tangled; guard doesn’t have
a cross bar
$13.65
John Deere Stabilizer Kit
Recommended for John Deere 25’ - 30’ Flex Heads
to Reduce Vibration
John Deere Stabilizer Kit
Product ID
Description
SCP082802
Stabilizer kit, for John Deere 900 series flex heads
Price
Product ID
Description
SCP082706
Tie rod assembly
Stabilizer Replacement Parts
$210.00
Price
$115.00
SCP082707
Bracket, anchor
$17.00
SCP082708
Bracket, angle
$118.00
SCP082709
“H” bracket
$25.00
www.sidist.com
71
Boule Cristal Strobe Light
Unbreakable &
flexible rotating
beacon
A High Quality, Unbreakable, Flexible & Rotating
Strobe Light for Agricultural Equipment
• Single voltage power supply
• Flexible rubber base
• Vibration proof and watertight
• Unbreakable polycarbonate dome
• Fast, clamp mounting
• Worm gear drive
• Metallized steel reflector with
balance counterweight and
stepped device for manual rotation
• Radio interference filter
Bracket B
LGT010000
Bracket F
Bracket R
Your Smart-Till Parts Service Center
We are now stocking replacement tines, bearings and other wear
items for the HCC Smart-Till residue management tool.
Smart-Till Replacement Parts
Notes
Price
HCC202925 Bolt for Tine
2 required per tine
$3.12
HCC212500 Lock Nut for Tine
2 required per tine
HCC226334 Heavy Duty Spindle & Hub Assembly
$1.04
$197.57
HCC231250 Tine, Left Hand Carriage
Casting Mark: LF/RR
$24.95
HCC231251 Tine, Right Hand Carriage
Casting Mark: RF/LR
$24.95
HCC243750 Pillow Block Bearing
$69.65
HCC553001 Roller Thrust Plate
HCC553237 C-Flex, 1” x 3”, 3-Hole
$4.88
For 2010 and newer models; beginning
with serial number 310xxx
HCC553238 Rock Guard
HCC853092 C-Flex, 1” x 3”, 4-Hole
800.368.7773
$96.75
$51.68
HCC553239 Retainer for Rock Guard
$16.76
For 2009 and earlier models; serial
number prior to 310xxx
Product ID
$115.65
Description
Boule Cristal
light, bracket sold
separately
Price
$79.95
LGT020000
Mounting bracket,
“B” style
$9.95
LGT020010
Mounting bracket,
“F” style
$9.95
LGT020020
Mounting bracket,
“R” style
$9.95
LGT029000
Halogen bulb
$9.95
Leatherman Tools
100% Stainless Steel Multi-Purpose Tools
with 25 Year Guarantee
Micra
Fuse
The stainless steel Leatherman Tool stands alone above the crowd of multipurpose tools on the market today. It is designed for the individual with an
eye for quality, ingenuity and elegance. The Leatherman Tool is more than a
well-designed cutlery item. It is the most practical, useful and compact multipurpose tool yet created. Whether you are buying for yourself or as a gift for a
farmer, fisherman, camper, hunter, hiker or other outdoors enthusiast, you can
make no finer, more appropriate choice than the Leatherman Tool.
Charge XTi
Wave
Surge
Price
Notes
LTH64010101 Micra Tool
$20.00
Pocket size.
LTH830024
Fuse with nylon sheath
$40.00
Mid size.
LTH831102
Super Tool 300 with leather sheath
$70.00
Large tool.
LTH830009
Charge Xti with leather sheath
$80.00 Discontinued. Price reduced!
LTH830038
Wave with nylon sheath
$80.00
Large tool.
LTH830159
Surge with nylon sheath
$100.00
Largest tool.
LTH831399
Super Tool 300 & Monarch 400 flashlight
$70.00
Best value.
Super Tool
300
The Postboxx
Unique Design and Function - No Holes to Dig!
The Postboxx is the only patented and certified mailbox that is free standing
using Sand or Gravel. Simply fill the pedestal with the desired ballast and
you have an elegant mailbox that is safe and durable.
Are You Tired of Having Your Mailbox Smashed?
The Postboxx may possibly be the last mailbox you’ll ever buy. Made from high
quality, sturdy, heavy impact polyethylene, this mailbox is
able to withstand the toughest abuse.
Sick of Looking at a Dingy, Unappealing Mailbox?
The Postboxx is made to complement the beauty and
charm of your home and comes in a variety of colors that
never needs repainted. The Postboxx is made to withstand
the elements and cleans easily, just wipe it or hose it off.
Price
PBX010000
Postboxx mailbox, black
$89.99
PBX020000
Postboxx mailbox, estate brown
$89.99
PBX030000
Postboxx mailbox, hunter green
$89.99
PBX040000
Postboxx mailbox, stone gray
$89.99
PBX050000
Postboxx mailbox, brick red
$89.99
PBX060000
Postboxx mailbox, white
$89.99
Tractor Safety Lights
Universal Mounting
Brackets Included
• Designed to comply with Ohio’s lighting law
• Breakaway extensions prevents damage to light
bar and or tractor
• Can be easily folded in for field operation and in
close quarters
• Adjustable width extensions that extend from
9-1/2’ up to 14’
Price
• Adjustable width universal mounting brackets
LGT090000
Tractor safety light bar
$328.00
that fit most tractors with minimal modifications
• Powder coat paint finish
www.sidist.com
• Draws only 4.7 AMPS
VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING 73
Schuck Cushion Hitches
The Custom Hitch Advantage
Swivel Tongue for
quick, easy hook-ups
Save time and effort on every hook-up, and that means saving
money for you. It eliminates the frustrating job of backing into an
exact position for hookup. The telescoping, swivel cushion tongue
extends out a full (7) seven inches beyond the “Tow” position and swivels 60o laterally (or 12” left to
right) for fast, easy hook-ups.
Model 320
A Urethane Tips “Compress” to Absorb
Minor Shocks!
B Urethane Cushions “Compress” to
Absorb Major Shocks!
Model 340
A
Model 750
B
Model 720
Schuck 300 Series Hitches
750 lbs tongue weight, 20,000 lbs. pulling capacity
For 1 or 2 axle trailers up to 10,000 lbs.
Price
SHU103100
Model 310 cushion hitch
Weld on (not shown)
$180.00
SHU103200
Bolt on for 8-12” bolt pattern
For factory bumpers with a flat mounting surface and all Schuck bumpers
$198.00
SHU103400
For 2” receiver tube, includes pin and clip
Note: Hitch can be turned over for a 4” tongue height difference
$198.00
Model 740
1,000 lbs tongue weight, 40,000 lbs. pulling capacity
Requires 12” from center of bumper mounting holes to spare tire
Model 750
Price
SHU107100
Weld on (not shown)
$239.00
SHU107200
Bolt on for 8-12” bolt pattern, includes stiffening brackets
$282.00
SHU107402
Note: There is a 2-1/2” drop from center of receiver tube to top of tongue.
$282.00
SHU107500
Model 750 cushion hitch with pullout swivel
Bolt on for 10-1/2” to 12” bolt pattern, includes stiffening brackets
$475.00
SHU107505
Model 750RT cushion hitch with pullout swivel
Note: There is a 5-1/2” drop from center of receiver tube to top of tongue. Tongue height
should be 16-18” off the ground. Measure from center of receiver tube to ground and
subtract the 5-1/2” drop.
$475.00
SHU107507
Model 750RTR cushion hitch with pullout swivel
Note: There is a 3-1/2” drop from center of receiver tube to top of tongue. Tongue height
should be 16-18” off the ground. Measure from center of receiver tube to ground and
subtract the 3-1/2” drop.
$475.00
800.368.7773
Model 750 RT
Model RTR
Schuck Cushion Hitches
2,000 lbs tongue weight, 50,000 lbs. pulling capacity
For 2 Ton Trucks
Price
SHU108100
Weld on (not shown)
$305.00
SHU108200
$380.00
SHU108400
$380.00
SHU108500
Model 850 cushion hitch with pullout swivel
Requires 13-1/2” from center of bumper mounting holes to spare tire
$658.00
Model 850
Schuck Receiver Tube
SHU100003
Price
2” Receiver tube
For 8-12” bolt pattern, includes chain hooks and stiffening brackets
$136.00
2” Receiver Tube
Schuck Parts & Accessories
Product ID
Description
SHU900300
300 Series replacement kit; 2 cushions, 3 bearings
$45.00
Price
SHU900700
$85.00
SHU900800
$112.00
SHU900002
Cushion, 300, 700 series
$14.00
SHU900003
Bearing, 300, 700 series
$7.00
SHU900004
Cushion, 800 series
$14.00
SHU900005
Bearing, 800 series
$7.00
SHU900011
Replacement tongue, 300 series
SHU900012
Replacement tongue, 700 series
SHU900013
Replacement tongue, 800 series, one hole
$103.00
SHU900010
Replacement tongue, 800 series, two holes
$113.00
SHU900001
Stone shield, for Schuck bumper
$55.00
SHU900014
Stiffening brackets; 20” long
$30.45
Replacement Kits
$48.00
$63.00
Mounting brackets, for Schuck bumper; specify make, model and year
$112.00
Cushion & Bearing
Schuck Bumper
The Model 1000 Bumper is specifically designed
for all pickup trucks. The 50,000 P.S.I. yield strength
tubing makes this the strongest commercial bumper
available. The bumper also requires a model specific
mounting bracket, stone shield and a hitch to
complete. Custom installation such as drilling holes
or welding braces to frame may be required in some
cases. Available in black only.
Schuck Bumper
SHU001000
Model 1000 heavy duty bumper
Must order mounting brackets, stone shield and hitch to complete
Price
$365.00
www.sidist.com
75
ERGO HITCH
Self-Aligning and Automatically Locking Hitch
with True Multi-Purpose Capabilities.
EgroTech, LLC is excited to announce the release of Ergo-Hitch, the self-aligning, automatically locking hitch that will change the way you think about
towing. If you think you’ve seen similar hitches in the past…THINK AGAIN!
You’ve never seen anything like the Ergo-Hitch. Originally and specifically
designed for SAFETY when hooking grain and hay wagons to your tractor
or truck, the Ergo-Hitch will become the most versatile hitch system on the
market.
Simply back up to your wagon or trailer and “Click” you’re hooked. Pull the
release lever and “Click” you’re unhooked, no pins or clips to mess with. The Ergo-Hitch is automatically locked in the open position
until your next hook up. Again, no pins or clips to mess with.
Use the Ergo-Hitch alone or with the “Big Mouth” vertical alignment ramps and the “Tongue Tender” wagon tongue lift attachment for
maximum versatility and safety. Use with the “Drawbar Adapter” to connect your Ergo-Hitch to any tractor drawbar. Also, available is
the specially engineered “Ergo Ball” for all Class I-IV ball hitch towing needs; available in 1-7/8” and 2” and 2-5/16” sizes.
Ergo-Hitch weighs less than 30 lbs. and is only 2” thick offering a sleek look as well as protection for the internal mechanics. Deceptively strong for its size, the Ergo-Hitch is rated at 40,000 lbs. of pulling capacity and 2,000 lbs. of tongue weight.
Ergo Hitch
Price
Ergo Hitch,
2” Cushion
Shank. For
use with pins
up to 1-1/4”.
$299.00
ERH610000
Ergo Big Mouth, 7/8” Pin. Adds
4” of vertical alignment for easy
hook up.
$25.00
ERH620000
Ergo Big Mouth, 1-1/4” Pin.
Adds 4” of vertical alignment
for easy hook up.
$25.00
ERH710000
Ergo Tongue Tender. Adjustable
spring tension keeps tongue at
correct height.
$85.00
ERH810000
Ergo Drawbar
Adapter.
Connects
Ergo Hitch to
any drawbar.
$65.00
ERH125000
800.368.7773
Lockease Hitch
Pin
The Safe and Easy
Solution
• Heavy duty hinged handle
helps prevent damage and
injury from disengaged pins
• Large metal collar prevents
handle damage and fallout
• Spring-loaded locking pin on top eliminates loss
of hair pin from field trash
• Large handle provides more leverage for easy
removal
• Heavy duty powder coating resists corrosion
and increases visibility
• Certified 1045 cold drawn steel and heat
treatment provides greater strength & wear
Product ID
LEP010001
LEP010002
LEP010003
LEP010004
LEP010005
LEP010006
LEP010008
LEP010009
LEP010010
LEP080005
Description
Lockease hitch pin, 3/4” x 6”
Lockease hitch pin, 7/8” x 6”
Lockease hitch pin, 1” x 6”
Lockease hitch pin, 1-1/8” x 7”
Lockease hitch pin, 3/4” x 4-1/2”
Lockease repair kit, includes
thumb latch, spring & roll pin
Price
$21.75
$23.25
$25.50
$30.25
$32.00
$39.00
$19.50
$22.25
$18.50
$6.50
Montezuma Toolboxes
Montezuma Roller Cabinet & Top Chest Toolboxes
Tool storage so advanced you will feel as though you are working in the future.
Montezuma created this cutting edge tool storage system by combining the flexibility of a drawer toolbox with the efficiency and organization
of their patented tool organization. This tool storage system will make you faster, more efficient, and keep you organized all the while placing
your most used tools at your fingertips and giving you instant tool inventory at a glance. This tool storage system organizes the more difficult to
organize sockets and combination end wrenches allowing the drawers to be used for the general tool storage. With its unique tool organization it
utilizes more of its capacity for tools and occupies less of your valuable shop or garage space.
Montezuma’s quality now comes in roller cabinets and top chest toolboxes that are easily transported within your shop. They are equipped
with full extension ball bearing drawer slides and a resilient powder coat paint finish. Montezuma roller cabinets and top chests have brushed
aluminum drawer pulls and corner trim and coded lock and keys. The top chests include gas springs for easy opening.
Montezuma 72” Elite 17-Drawer
Roller Cabinet Toolbox
72” wide x 30” deep x 46-1/4” high. Weighs 1,000 lbs.
72” Elite
17-drawer
roller
CPL721700 BK7217MZ
cabinet
toolbox,
black
72” Elite
17-drawer
roller
CPL721703 BU7217MZ
cabinet
toolbox,
blue
$4,150.00
$4,150.00
Price
$3,075.00
$3,075.00
CPL560700
BK5607CH
56” 7-drawer
top chest
toolbox, black
$795.00
CPL561100
BK5611TC
56” 11-drawer
roller cabinet
toolbox, black
$1,195.00
Price
CPL410800
BK4108CH
41” 8-drawer
top chest
toolbox, black
$545.00
CPL411100
BK4111TC
41” 11-drawer
roller cabinet
toolbox, black
$830.00
Montezuma 36” Top Chest & Roller Cabinet Toolbox
Price
CPL360800
BK3608CH
36” 8-drawer
top chest, black
$510.00
CPL360610
BK3606TC
36” 6-drawer
roller cabinet,
black
$740.00
Montezuma 72” 13-Drawer Top Chest Toolbox
71-1/2” wide x 29-1/2” deep x 23-1/8” high.
Weighs 505 lbs.
72”
13-drawer
CPL721300 BK7213CH top chest
toolbox,
black
72”
13-drawer
CPL721303 BU7213CH top chest
toolbox,
blue
Price
Price
Montezuma 72” Classic 15-Drawer
Roller Cabinet Toolbox
72” wide x 30” deep x 46-1/4” high. Weighs 850 lbs.
72” Classic
15-drawer
roller
CPL721500 BK7215TC
cabinet
toolbox,
black
72” Classic
15-drawer
roller
CPL721503 BU7215TC
cabinet
toolbox,
blue
Price
$2,250.00
$2,250.00
Price
CPL260400
BK2604CH
26” 4-drawer
top chest, black
$375.00
CPL260600
BK2606TC
26” 6-drawer
roller cabinet,
black
$595.00
Note: The 36” and 26” roller cabinets can also be used with the portable
toolboxes on pages 78-79.
www.sidist.com
77
Montezuma Toolboxes
Limited 5-Year Warranty
All Montezuma toolboxes have a Limited 5-Year Warranty to
the original user against defects in workmanship and material
under normal use. This Limited 5-Year Warranty does not apply to
products that have been misused, abused, damaged by accident
or otherwise, subjected to abnormal use, used in any type of
over the road use, or modified by anyone other than Montezuma
Mfg., Inc. During the applicable duration of the warranty, at its
option Montezuma Mfg., Inc. will repair or replace its products
which fail to give satisfactory performance due to defective
workmanship or materials, or provide a refund by repaying or
crediting with an amount equal to the purchase price of such
products.
Note: The 36” and 26” portable toolboxes can also be used with
the roller cabinets on page 77.
FEATURES:
•
•
•
•
•
•
•
•
•
•
•
•
•
16 gauge steel or .100” thick tread aluminum construction
Welded seams, no spot welding
Holds metric and/or S.A.E. tools
Lid secures tools in position when closed
Gas spring raises lid when unlatched for easy tool access
Weather stripping creates a tight seal against dust and
moisture
Chrome plated side handles on both sides of chest
Locking latch secures tools from unauthorized use
Lock cylinder has double-cut keys for easier locking and
unlocking
Powder coated with a tough, scratch resistance, textured,
powder paint
Full width wrap around aluminum drawer pull
Premium drawer liner
Tool inventory at a glance
Montezuma Portable Steel Toolbox
36” wide x 17-3/8” deep x 21-1/2” high. Weighs 91 lbs.
Product ID
Vendor ID
Description
Price
CPL364500
XL450B
Portable steel toolbox, 36” x 17-3/8” x 21-1/2”, black
$665.00
CPL364501
XL450R
Portable steel toolbox, 36” x 17-3/8” x 21-1/2”, red
$665.00
Product ID
Vendor ID
Description
Price
CPL003100
LA400B
Portable steel toolbox, 30” x 19” x 20-1/8”, black
$675.00
CPL003101
LA400R
Portable steel toolbox, 30” x 19” x 20-1/8”, red
$675.00
CPL003102
LA400W
Portable steel toolbox, 30” x 19” x 20-1/8”, white
$675.00
Montezuma Portable Aluminum Toolbox
800.368.7773
Product ID
Vendor ID
Description
Price
CPL002203
ME300AL
Portable aluminum toolbox, 30” x 15” x 18-1/8”, brite
$595.00
CPL002204
ME300ALB
Portable aluminum toolbox, 30” x 15” x 18-1/8”, black
$595.00
CPL002205
ME300ALR
Portable aluminum toolbox, 30” x 15” x 18-1/8”, red
$595.00
CPL002206
ME300ALW
Portable aluminum toolbox, 30” x 15” x 18-1/8”, white
$595.00
Montezuma Toolboxes
Product ID
Vendor ID
Description
Price
CPL002200
ME300B
Portable steel toolbox, 30” x 15” x 18-1/8”, black
$525.00
CPL002201
ME300R
Portable steel toolbox, 30” x 15” x 18-1/8”, red
$525.00
CPL002202
ME300W
Portable steel toolbox, 30” x 15” x 18-1/8”, white
$525.00
Product ID
Vendor ID
Description
Price
CPL263500
IM350B
$560.00
CPL263501
IM350R
$560.00
Montezuma Portable Aluminum Toolbox
Product ID
Vendor ID
Description
Price
CPL262503
SE250AL
Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, brite
$540.00
CPL262504
SE250ALB
Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, black
$590.00
CPL262505
SE250ALR
Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, red
$590.00
Product ID
Vendor ID
Description
Price
CPL262500
SE250B
$485.00
CPL262501
SE250R
$485.00
22-1/2” wide x 13” deep x 14-1/8” high. Weighs 43 lbs.
Product ID
Vendor ID
Description
Price
CPL001200
SM200B
Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, black
$425.00
CPL001201
SM200R
Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, red
$425.00
CPL001202
SM200W
Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, white
$425.00
www.sidist.com
79
Show Schedule
January 8-10, 2013
Keystone Farm Show
York, Pennsylvania
Booth 420-422
February 26-28, 2013
Hawkeye Farm Show
Cedar Falls, Iowa
Booth 408-412
January 15-17, 2013
Fort Wayne Farm Show
Fort Wayne, Indiana
Booth 760-766
March 1-2, 2013
Mid-South Farm & Gin Supply
Memphis, Tennessee
Booth 919-921
January 20-22, 2013
Quad Cities Farm Equipment Show
Rock Island, Illinois
Booth 701-703
March 6-7, 2013
Triumph of Ag Expo
Omaha, Nebraska
Booth 631-633
January 23-24, 2013
Midwest Ag Expo-Illinois
Gordyville USA, Gifford, Illinois
Booth 225
March 26-28, 2013
WPS Farm Show
Oshkosh, Wisconsin
Booth D6538-D6541
January 25-27, 2013
Power Show Ohio
Columbus, Ohio
Booth 012, Bricker Building
April 18-20, 2013
Southern Plains Farm Show
Oklahoma City, Oklahoma
Booth AB515
January 29-31, 2013
Iowa Power Farming Show
Des Moines, Iowa
Booth 1241
July 9-11, 2013
Wisconsin Farm Technology Days
Barron County, Wisconsin
Lot 648
January 30-February 1, 2013
Southern Farm Show
Raleigh, North Carolina
Booth 3305
July 11-13, 2013
WKMA 3i Show
Dodge City, Kansas
Lot I-62, I-64, I-66
February 13-16, 2013
National Farm & Machinery Show
Louisville, Kentucky
Booth 8004, Pavilion
July 16-18, 2013
Michigan Ag Expo
East Lansing, Michigan
Lot 521
800.368.7773
July 19-21, 2013
Four State Farm Show
Pittsburg, Kansas
Lot 425-426
September 10-12, 2013
Husker Harvest Days
Grand Island, Nebraska
Lot 354
August 6-8, 2013
Farm Fest
Redwood Falls, Minnesota
Lot 214
Farm Science Review
Columbus, Ohio
Lot 581
August 6-8, 2013
Empire Farm Days
Seneca Falls, New York
Lot 709, West Time Saver Ave.
December 3-5, 2013
Greater Peoria Farm Show
Peoria, Illinois
Booth H0827-H0831
August 13-15, 2013
Ag Progress
Rock Springs, Pennsylvania
West 2nd Street
December 10-12, 2013
Nebraska Power Farming Show
Lincoln, Nebraska
Booth 1435
August 20-22, 2013
Dakotafest
Mitchell, South Dakota
Lot 532
December 17-19, 2013
Indiana-Illinois Farm Equip. Show
Indianapolis, Indiana
Booth 205-207
August 27-29, 2013
Farm Progress Show
Decatur, Illinois
Lot 524
Clay County Fair
Spencer, Iowa
7th Avenue & 2nd Street
Big Iron Farm Show & Expo
West Fargo, North Dakota
Booth A32-A34, Ag Building

Table of ConTenTs

Transcription

Similar documents

Provided by Schmidt Equipment, Inc. and John Deere

1800lastbid.com BID LIVE ONLINE

A1-A32 AE50 PGS

Kearney, NE - Ritchie Bros. Auctioneers

OPEN SALE BILL - Terry Evans Auctions

The wardrobe malfunction — it`s a Hollywood moment that

1-800-LASTBID

Centricoater

Keeton Universal Bracket Installation (955001_07)

Emergency Preparedness Guide