VENUS-T SERIES

VENUS-T SERIES
Tunable White LED Fixture
TW290 / TW350
91 INTELLIGENT LIGHTING SOLUTIONS
INTELLIGENT LIGHTING SOLUTIONS 92
IP20 IK10
SAA
RoHS
VENUS-T SERIES
TW290/ TW350
Diffuser by twist lock
0
1
2
3
4
5
6
7
8
Tunable White LED Fixture
Remote Controller
Features & benefits:
Colour temperature and dimming level can be manually controlled by PUSH & 1~10V dimmer.
The daylight sensor can control daylight harvest or tune the colour temperature automatically
according to ambient daylight.
Memory feature: following a power failure the light reverts to its previous settings.
High quality controllers by HYTRONIK.
TW290
5 years guarantee.
Dynaluxx provides local warehouse and 24 hours technical support on site worldwide.
T
TW290
Power
CCT(K)
Lumen
opal cover
18W
3000K~6000K
1300~1450
TW350
103.00
290.00
C0/C180:
T
TW350
Power
CCT(K)
Lumen
opal cover
28W
3000K~6000K
2000~2200
C90/C270:
350.00
105.00
Cool white (CH2)
C0/C180:
C90/C270:
Warm white (CH1)
93 INTELLIGENT LIGHTING SOLUTIONS
INTELLIGENT LIGHTING SOLUTIONS 94
Manually adjust colour temperature and dimming level:
Daylight sensor
When the photocell is used for daylight harvest, the potentiometer adjusts the
required lux level.
Potentiometer for
adjusting target lux level
or colour temperature
x
80
50- 0Lu
0-600
0
27
0K
PUSH
1-10V dimmer
PUSH
1-10V dimmer
PUSH
1-10V dimmer
PUSH
1-10V dimmer
When the photocell is used for white colour tuning, the potentiometer adjusts the
colour temperature between 2700K and 6000K. This function is very useful for
matching the light to the changing seasons, for example, in summer, by turning up
the meter, the light colour varies between 4000-6000K; while in winter, by turning
down the meter, the light colour varies between 2700-4000K.
These adjustments are more easily done using the remote control.
Colour tuning & dimming level by remote control
Push switch
1-10V dimmer
Push the switch to adjust colour temperature
between warm, natural and cool (3000K to
6000K) the lux level remains the same.
Dimming level 1%~100% by 1~10V dimmer.
Permanent ON/OFF function
Manually switch on or switch off the light
1~10V dimmer: is used to adjust the colour temperature between warm, natural and cool (3000K to 6000K) where push
switches aren’t used.
Colour temperature
Automatic colour tuning and manual dimming adjustment:
8:00AM
6:00AM
10:00AM
Daylight sensor
Daylight sensor
Long press ‘Colour temp. +’ or ‘Colour temp.
-‘ to adjust the colour of the light. ‘+ ‘ means
light turns to cool white, while ‘- ‘ means light
turns to warm white.
12:00AM
Daylight sensor
This fixture is overdesigned with 20% lumen
output @ the initial 10,000 hours due to the
lumen depreciation of LED . this 20% can be
saved by pressing the 80% key during the
first 10,000 hours.
Press the 100% key to go back to the full
output after 10,000 hrs to maintain the total
lumen output.
Daylight sensor
Direct access to 2700k, 3500k, 4500k,
5500k are also available by pressing those
keys.
Push switch
20% saving @ initial 10,000 hrs.
Push switch
Push switch
dim up/down
Long press “Dim +” or “Dim ” to adjust the
brightlness of the fixture.
Push switch
1-10v dimmer function
2 options are offered for the 1-10V dimmer
function: to dim the light or change Colour
temperature.
16:00AM
14:00AM
Daylight sensor
Daylight sensor
19:00AM
17:00AM
photocell function
With the employment of photocell, this fixture
can either harvest daylight, or change Colour
temperature automaticly according to the
nature daylight: the lower ambient light, the
warmer the Colour. this feature matches the
rythm and the need of human well-beings.
Daylight sensor
Daylight sensor
Press “Auto Dim” goes the daylight harvest
function; press “Auto Tune” goes to automatic
Colour tuning.
Auto Mode
SC4
RESET
+
Colour temp.
+
Dim
-
SC2
Scene mode
SC3
-
ON/
OFF
SC1
Detection range
100%
30S
75%
1min
50%
10%
5min
TEST
2S
Hold-time
10min
0S
20min
30min
8H
10S
1min
5min
30min
1H
+
8
Stand-by-period
10min
Stand-by dimming level
10%
Push switch
95 INTELLIGENT LIGHTING SOLUTIONS
Push switch
Push switch
20%
30%
50%
Push switch
INTELLIGENT LIGHTING SOLUTIONS 96
Specification:
Model
TW290
TW350
Input Voltage
220~240VAC / 120~277VAC
220~240VAC / 120~277VAC
Power rating
18W
28W
LEDs
SMD2835 LM-80
SMD2835 LM-80
CRI
80
80
Fitting material
UV stabe Polycarbonate
UV stabe Polycarbonate
Fitting colour
White
White
Class
II
II
Impact resistance
IK10
IK10
IP rating
IP20
IP20
Certificate
CE,EMC,R&TTE,SAA,ETC,FCC
CE,EMC,R&TTE,SAA,ETC,FCC
Standard
EN60598-2-1
EN60598-2-1
Ordering code for product:
Product
Fitting series
Dimension
(DXH mm)
Power(W)
Function Desc.
TW290 18 TUW
TW 290
290x103
18
Tunable white
TW350 28 TUW
TW 350
350x105
28
Tunable white
Ordering code
Input 220V~240V
CE approval
Input 120~277V
ETL approval
Input voltage code:
Code No.
Input voltage
EU
220~240V
CE
US
120~277V
ETL
97 INTELLIGENT LIGHTING SOLUTIONS
Approval
98