croquet caddy - EastPoint Sports

CROQUET CADDY
Assembly Instructions
Model 1-1-02340
CHOKING HAZARD - Product contains small balls
and small parts. Not for children under 3 years.
ADULT ASSEMBLY REQUIRED - Product
must be assembled by adult before use.
TOOLS
Recommended (Not Required):
Required
• Electric Screwdriver or Power Driver
CAUTION - DO NOT OVER TIGHTEN. Over Tightening
will result in irreparable damage to the product. If using,
please make sure that the tool is set to a very low torque
to prevent damage to the product.
• 1 - Phillips Head Screwdriver
(Standard Size) - Not Included
How to use the PARTS IDENTIFIER
Before you begin assembly, please make sure that
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Instructions Parts ID #
1
Part Name
Part Name
Part Image
Item #
Be sure to work on the assembly on a soft
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage
to the table surface during assembly.
Part Quantity
# 52703-QT
FOR STEP 1
x2
Step Used In
PARTS IDENTIFIER
1
2
Leg - Left
#02340-01LG
x1
#02340-02LG
FOR STEP 1
5
6
x2
FOR STEP 2
9
10
x1
FOR STEP 3
13
FOR STEP 6
x2
14
x2
x2
x2
x2
x2
FOR STEP 7
FOR STEP 8
1
#02340-08LG
x2
Mallet Head Holder
#02340-12LG
x2
FOR STEP 5
16
Mallet Handle Holder
#02340-15LG
Wheel Axle Cap
12
FOR STEP 5
15
x1
FOR STEP 2
Short Spacer
#02340-11LG
Stake Holder
#02340-14LG
#02340-04LG
8
FOR STEP 2
11
Foot - Right
FOR STEP 1
Wheel Axle Spacer
#02340-07LG
FOR STEP 4
Cross Support
#02340-13LG
7
Pole
#02340-10LG
x1
FOR STEP 1
Wheel Axle
#02340-06LG
4
Foot - Left
#02340-03LG
FOR STEP 2
Leg Base
#02340-09LG
x1
FOR STEP 1
Wheel
#02340-05LG
3
Leg - Right
x1
Cross Support Bar
#02340-16LG
FOR STEP 8
x1
PARTS IDENTIFIER
17
18
Handle Assembly
#02340-17LG
x1
FOR STEP 10
19
Ball Bag
#02340-18LG
x2
Bar Holder
#02340-19LG
FOR STEP 11
x2
PRE-INSTALLED
HARDWARE
60
61
Screw (Foot)
#02340-60LG
x2
FOR STEP 1
64
#02340-61LG
x10
65
x2
FOR STEP 7
x10
FOR STEP 4, 9, 10
66
Long Bolt (Cross Support Bar)
#02340-65LG
63
Nut
#02340-62LG
FOR STEP 3, 4, 10
Screw (Stake Holder)
#02340-64LG
62
Bolt
x2
#02340-63LG
x4
FOR STEP 6
Screw (Bar Holder)
#02340-66LG
FOR STEP 9
Screw (Cross Supports)
x8
PRE-INSTALLED
ACCESSORIES
80
81
Mallet Head
x6
FOR STEP 14
84
82
Mallet Handle
x6
83
Croquet Balls
x6
FOR STEP 14
Wooden Stake
x2
2
Metal Wickets
x9
ASSEMBLY INSTRUCTIONS
Caddy Construction
START
BEFORE BUILDING - Please inspect and layout all your PARTS
All parts listed in the Parts
Identifier and Accessories
Please review
the Parts
Identifier and
make sure that
you have all
parts before
beginning
assembly.
STEP 1
1
2
3
4
1 Leg - Left
x1
2 Leg - Right
x1
3 Foot - Left
x1
4 Foot - Right
x1
HARDWARE
QTY.
60 Screw (Foot)
x2
60
STEP 2
6
Step 1 Assembly
Step 1 Assemblies
5
7
8
NOTE: Tab on
Shaft goes face up
and Flat end is on
the bottom.
5 Wheel
x2
6 Wheel Axle
x2
7 Wheel Axle Spacer
x2
8 Wheel Axle Cap
x2
HARDWARE
NOTE: Tab on
Cap goes face up.
3
x2
QTY.
IMPORTANT:
The Tabs on
both the
Wheel Axle &
Wheel Axle
Cap must face
up in order for
Wheel to be
properly
assembly.
STEP 3
Step 2 Assembly
9 Leg Base
9
Step 2 Assemblies
x2
x1
IMPORTANT:
Nut side of Leg
Base should face
Wheels.
HARDWARE
61 Bolt
QTY.
x2
61
STEP 4
Step 3 Assembly
A
10 Pole
Insert Poles into
Step Assembly 3.
x1
x2
10
HARDWARE
B
Bolt the Poles in.
DO NOT
OVERTIGHTEN.
NOTE:
Smaller
holes are located
towards the lower
end of Poles. Sink
hole side should
face out.
62
Step 3 Assembly
61
4
QTY.
61 Bolt
x4
62 Nut
x4
12
11
STEP 5
Step 4 Assembly
x1
11 Short Spacer
x2
12 Mallet Head Holder
x2
HARDWARE
QTY.
Wiggle the
Short Spacer &
Mallet Head
Holders down
the poles.
DO NOT
FORCE.
Gently work
until poles
reach their
correct
placement.
Step 4 Assembly
STEP 6
13 Cross Support
x2
Slide the Cross
Supports into
the designated
spot, then
insert Screws.
HARDWARE
QTY.
DO NOT
OVERTIGHTEN.
Step 5 Assembly
x1
Step 5 Assembly
63
63 Screw (Cross Support)
x4
Step 6 Assembly
x1
13
STEP 7
14 Stake Holder
x2
14
64
NOTE: Stake holder
MUST BE on WHEEL SIDE
of leg base.
HARDWARE
64 Screw (Stake Holder)
Step 5 Assembly
5
QTY.
x2
Slide Stake
Holders down
Poles and
insert Screws.
DO NOT
OVERTIGHTEN.
NOTE:
STEP 8
Wicket Holder is on same side as Stake
“c” Clip.
15
15 Mallet Handle Holder
x1
16 Cross Support Bar
x1
HARDWARE
Snap together.
QTY.
NOTE:
Shows Finished STEP 8
Assembly
16
STEP 9
Step 8 Assembly
62
Step 7 Assembly
x1
Step 8 Assembly
x1
NOTE:
65
Make sure Stake “C”
Clip and Stake
Holder are on the
SAME SIDE.
Step 7 Assembly
HARDWARE
QTY.
62 Nut
x2
65 Long Bolt (Cross Support Bar)
x2
NOTE:
Slide STEP 8
Assembly
down poles
until bolt
holes line up
Hold finger on
Nut while
screwing bolt
tight.
DO NOT
OVERTIGHTEN.
STEP 10
17
Step 9 Assembly
x1
17 Handle Assembly
x1
62
HARDWARE
61
Step 9 Assembly
6
QTY.
61 Bolt
x4
62 Nut
x4
Sit Handle
Assembly onto
holes.
Hold finger on
Nut while
screwing bolt
tight.
DO NOT
OVERTIGHTEN.
STEP 11
Step 10 Assembly
18 Ball Bag
Step 10 Assembly
HARDWARE
18
x1
x2
QTY.
STEP 12
CADDY IS NOW ASSEMBLED.
TIME TO MOBILIZE AND
ORGANIZE.
7
Hang Ball Bags
on hooks.
ASSEMBLY INSTRUCTIONS
Mallet Construction
STEP 13
BEFORE BUILDING - Please inspect and layout all your PARTS
All parts listed in the Parts
Identifier and Accessories
Please review
the Parts
Identifier and
make sure that
you have all
parts before
beginning
assembly.
STEP 14
80
81
8
80 Mallet Head
x6
81 Mallet Handle
x6
HARDWARE
QTY.
Screw Mallet
Handle (81)
into Mallet
Head (80).
Repeat for all
Mallets.
ASSEMBLY INSTRUCTIONS
Game Parts Placements
Caddy
x1
Wickets
x9
Mallets
x6
Ball Bags
x2
Balls
x6
Stakes
x2
9
Limited Warranty
As described in and as limited by this Limited Warranty, EastPoint Sports, Ltd. (the “Company”) warrants this Game (the “Product”) to be free from defects in
workmanship and materials for a period of 90 days from the date of original purchase. The term defects shall mean any imperfections that impair the use of the product.
The Company reserves the right to request confirmation of Proof of Purchase when requesting parts or service in order to confirm that the game is within its warranty period.
What is Covered: Except as provided herein, this Limited Warranty covers all defects in materials and workmanship. This Limited Warranty is void if the Product is:
•
Damaged through improper usage or storage, negligence, misuse, abuse, transportation damage, acts of nature, or accident (including failure to follow the
instructions supplied with the product)
•
Used in commercial applications, rentals or a commercial environment
•
Modified or repaired by anyone not authorized by the Company
What is Not Covered:
The Limited Warranty does not cover:
•
Expendable items such as cosmetic parts, game playing accessories, and any other items that may show signs of wear due to normal usage
•
Any transportation/delivery/installation costs incurred by the Consumer (either home from the original place of purchase or back to the original place of purchase)
What the Company Will Pay For:
•
If any part or component of the Product which is covered by this Limited Warranty is found by the Company to be defective, the Company will provide replacement
parts without charge. The Company’s obligation to repair or replace the Product or any portion thereof, shall be limited to the original purchase price of the product.
•
If during the Limited Warranty period, the product is found to be defective, the Company will, at the Company’s option, repair, replace, or make remuneration for the
Product (either the same or equivalent value) without charge.
How to Obtain Warranty Service: In order to enforce your rights under this Limited Warranty, you must follow these procedures:
•
You must return the ORIGINAL COPY OF YOUR SALES RECEIPT to the Company.
•
You must call the Company’s Consumer Service Department at 1-877-279-7071 on Monday through Friday between the hours of 9:00 A.M. and 5:00 P.M. (EST) to notify
the Company of the nature of the problem. At the Company’s option, replacement parts or a new Product (either the same or equivalent value) will be sent to you
at no charge.
•
If you are instructed to return the Product to the Company for servicing, you are responsible for shipping the Product, at your expense, to the address designated
by the Company in packaging that will protect against further damage.
•
You must also include your name, address, daytime telephone number, Product model number, and a description of the problem.
•
The Company will pay for any shipping charges to return the repaired of replaced Product to you.
THIS LIMITED WARRANTY IS AVAILABLE ONLY TO THE ORIGINAL PURCHASER OF THE PRODUCT AND IS VALID ONLY IN THE UNITED STATES. THE COMPANY’S
LIABILITY IS LIMITED TO THE REPAIR, REPLACEMENT, OR REMUNERATION, AT ITS OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE ANY LIABILITY
FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR DO NOT ALLOW FOR EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. TO THAT EXTENT, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
This Limited Warranty gives you specific legal rights, but you may also have other rights that vary from state to state.
If you have any questions regarding this Limited Warranty or the operation of the Product, you may call or write us.
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A COPY OF THE SALES RECEIPT/PROOF OF PURCHASE. REPORT ANY DEFECTS TO:
628 ROUTE 10, SUITE #5 WHIPPANY, NEW JERSEY 07981 • 1-973-585-4747
10
628 ROUTE 10, SUITE #5 WHIPPANY, NEW JERSEY 07981 • 1-973-585-4747
PRINTED IN CHINA
1-1-02340 IM 185.189