Burrs End Mills Cutters, Tool Bits

Transcription

Burrs
End Mills
Cutters, Tool Bits
C
Burrs
Solid Carbide End Mills
Carbide
Three Flute
NEW!
Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications & Speeds . . . . . . . . . . . . . . . . . . .
Carbide Burrs / Sets / Dispenser . . . . . . . . . . .
Carbide Burrs, Long Shank . . . . . . . . . . . . . . .
Carbide Burrs, Miniature Series / Sets . . . . . . .
Carbide Burrs, Alumacut / Sets . . . . . . . . . . . .
Carbide Burr Dispenser . . . . . . . . . . . . . . . . . . .
Carbide Fiberglass Routers . . . . . . . . . . . . . . .
C2
C3
C4-6
C7
C8
C9
C10
C10
High-Speed Steel
Center Cutting
Single End 60° Helix . . . . . . . . . . . . . . . . . . . . . C16
Single End 60° Helix, AlTiN Coated . . . . . . . . . C16
NEW!
Four Flute
Center Cutting
Single End . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single End, AlTiN Coated . . . . . . . . . . . . . . . . .
Single End X-Long . . . . . . . . . . . . . . . . . . . . . .
Single End X-Long, AlTiN Coated . . . . . . . . . . .
Single End Stub . . . . . . . . . . . . . . . . . . . . . . . .
Single End Stub, AlTiN Coated . . . . . . . . . . . . .
Single End Metric . . . . . . . . . . . . . . . . . . . . . . .
Single End Metric, AlTiN Coated . . . . . . . . . . .
Single End Ball . . . . . . . . . . . . . . . . . . . . . . . . .
Single End Ball, AlTiN Coated . . . . . . . . . . . . .
Single End, Corner Radius . . . . . . . . . . . . . . . .
Single End, Corner Radius, AlTiN Coated . . . .
C17
C17
C17
C17
C17
C17
C18
C18
C18
C18
C18
C18
Double End . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Double End, AlTiN Coated . . . . . . . . . . . . . . . .
Double End Stub . . . . . . . . . . . . . . . . . . . . . . . .
Double End Stub, AlTiN Coated . . . . . . . . . . . .
C19
C19
C19
C19
NEW!
NEW!
Rotary Files / Sets . . . . . . . . . . . . . . . . . . . . . . . C11
NEW!
Deburring Tools
Deburring Tools . . . . . . . . . . . . . . . . . . . . . . . . . C12
Blades for Deburring Tools . . . . . . . . . . . . . . . . C12
NEW!
NEW!
NEW!
End Mills
C
NEW!
Information & Coatings . . . . . . . . . . . . . . . . . . . C13
NEW!
NEW!
Two Flute
NEW!
NEW!
Center Cutting
Single End . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single End, AlTiN Coated . . . . . . . . . . . . . . . . .
Single End, X-Long . . . . . . . . . . . . . . . . . . . . . .
Single End, X-Long, AlTiN Coated . . . . . . . . . .
Single End Stub . . . . . . . . . . . . . . . . . . . . . . . .
Single End Stub, AlTiN Coated . . . . . . . . . . . . .
Single End Metric . . . . . . . . . . . . . . . . . . . . . . .
Single End Metric, AlTiN Coated . . . . . . . . . . .
Single End Ball . . . . . . . . . . . . . . . . . . . . . . . . .
Single End Ball, AlTiN Coated . . . . . . . . . . . . .
C14
C14
C14
C14
C14
C14
C15
C15
C15
C15
Double End . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Double End, AlTiN Coated . . . . . . . . . . . . . . . .
Double End Stub . . . . . . . . . . . . . . . . . . . . . . . .
Double End Stub, AlTiN Coated . . . . . . . . . . . .
C16
C16
C16
C16
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
C-ii
High Performance Variable Helix, AlTiN Coated C19
High Performance Ball, Variable Helix,
AlTiN Coated . . . . . . . . . . . . . . . . . . . . . . . . C19
Solid Carbide Roughing End Mills
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
Four Flute, Coarse Pitch . . . . . . . . . . . . . . . . . .
Four Flute, Coarse Pitch, AlTiN Coated . . . . . .
Four Flute, Coarse Pitch, Long . . . . . . . . . . . . .
Four Flute, Coarse Pitch, Long, AlTiN Coated .
C20
C20
C20
C20
Multi-Flute, Fine Pitch . . . . . . . . . . . . . . . . . . . . C20
Multi-Flute, Fine Pitch, AlTiN Coated . . . . . . . . C20
C
Burrs
End Mills
Cutters, Tool Bits
High-Speed Steel End Mills
Cobalt Steel End Mills
Two Flute
Two Flute
Center Cutting
Single End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C21
Single End Long . . . . . . . . . . . . . . . . . . . . . . . . C21
Single End Ball . . . . . . . . . . . . . . . . . . . . . . . . . C21
Center Cutting
Single End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C26
Double End . . . . . . . . . . . . . . . . . . . . . . . . . . . . C22
Double End Ball . . . . . . . . . . . . . . . . . . . . . . . . C22
Multi-Flute
Center Cutting
Single End . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single End Long . . . . . . . . . . . . . . . . . . . . . . . .
Single End X-Long . . . . . . . . . . . . . . . . . . . . . .
Single End Ball . . . . . . . . . . . . . . . . . . . . . . . . .
Single End Ball Long . . . . . . . . . . . . . . . . . . . . .
Single End Ball X-Long . . . . . . . . . . . . . . . . . . .
NEW!
NEW!
NEW!
NEW!
C23
C23
C23
C23
C23
C23
Non-Center Cutting
Single End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C24
Single End Long . . . . . . . . . . . . . . . . . . . . . . . . C24
Double End . . . . . . . . . . . . . . . . . . . . . . . . . . . . C24
End Mills, Miniature . . . . . . . . . . . . . . . . . . . . . . . . C25
Double End . . . . . . . . . . . . . . . . . . . . . . . . . . . . C26
Multi-Flute
Center Cutting
Single End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C27
Single End Long . . . . . . . . . . . . . . . . . . . . . . . . C27
Double End . . . . . . . . . . . . . . . . . . . . . . . . . . . . C27
End Mill Dispenser Cabinet . . . . . . . . . . . . . . . . . . C27
Cobalt Roughing End Mills
Coarse Pitch
Single End Multi-Flute . . . . . . . . . . . . . . . . . . . .
Single End Multi-Flute Ball . . . . . . . . . . . . . . . .
Single End Multi Flute for Bridgeport . . . . . . . .
Shell Type Multi-Flute . . . . . . . . . . . . . . . . . . . .
C28
C28
C28
C28
C
HSS Cutters
Woodruff Keyseat . . . . . . . . . . . . . . . . . . . . . . . C29
Corner Rounding . . . . . . . . . . . . . . . . . . . . . . . . C29
Dovetail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C29
Tool Bits
HSS / Cobalt . . . . . . . . . . . . . . . . . . . . . . . . . . . C30
Carbide Tipped Tool Bits . . . . . . . . . . . . . . . . . C31
Indexable Insert Boring Bars . . . . . . . . . . . . . . C32
End Mill Terminology . . . . . . . . . . . . . . . . . . . . . . . . C33
C-1
Micrograin Carbide Burrs
• Used in many industries for stock removal and the removal of burrs.
• Manufactured from micrograin carbide on automated CNC machines.
• TiN coating provides longer tool life.
Single Cut
C
• General purpose style . Provides
good stock removal and a smooth
finish on materials like steel, cast
iron and ferrous metals .
TiN Coating
• Titanium Nitride coating provides
longer edge retention, corrosion
resistance and increases tool life
by a factor of three or more .
Double Cut
• Best selling style with heavy stock
removal qualities on tough materials .
• Engineered to reduce chip size
and pulling action .
Chipbreaker
• Made to provide better control and
reduce chipping . For use on hard
materials like steel alloy 50RC-60RC,
carbon steel and cast iron .
Alumacut
• Designed for obtaining a great
finish on aluminum, reinforced
plastics, soft steels and other
soft materials .
Diamond Cut
• Reduces chip size almost to
powder and with excellent control
on tough treated alloy steels .
Single Cut, Double Cut, Alumacut and TiN Coated Double Cut Burrs available in stock.
Chipbreaker and Diamond Cut are available on request.
C-2
Carbide & High-Speed Steel Burrs
APPLICATIONS & SPEED REFERENCE CHARTS
APPLICATIONS
MATERIAL
CUTTING
GENERAL BURR SPEED
RECOMMENDATIONS
SUITABILITY
Single Cut
Double Cut
Aluminum
Alumacut
n
Brass
n
n
Bronze
n
n
Burr
Diameter
n
n
Cast Iron
n
n
Copper
n
n
1/16" or 1 .5mm
1/8" or 3mm
3/16" or 5mm
1/4" or 6mm
n*
Fiberglass
Hard Rubber
n
n
Inconel
n
n
Magnesium
n
n
Stainless Steel
n
n
Steel - 45-55Rc
n
n
Steel - 55-60Rc
n
n
Steel - Nickel Chrome
n
n
Steel - Weldments
n
n
Titanium
n
n
Zinc
60,000 - 90,000
45,000 - 50,000
35,000 - 40,000
30,000 - 35,000
CARBIDE HEAD BRAZED TO STEEL SHANK
n
Plastics
Recommended
(RPM)
SOLID CARBIDE
n*
Carbon Fiber
Carbon Steel
The following chart is a general and approximate
recommendation . Variations to achieve desired results
may be necessary .
n
n
3/16" on 1/8" shank
1/4" on 1/8" shank
5/16" on 1/4" shank
3/8" on 1/4" shank
7/16" on 1/4" shank
1/2" on 1/4" shank
5/8" on 1/4" shank
3/4" on 1/4" shank
1" on 1/4" shank
35,000 - 40,000
25,000 - 30,000
25,000 - 30,000
25,000 - 30,000
20,000 - 25,000
20,000 - 25,000
15,000 - 20,000
15,000 - 20,000
12,000 - 18,000
Speed & Applications • Cross-Reference Chart
• A full line of burrs for a wide range of applications
• A wide selection of fluting styles
• Extra-long shanks available
• Miniature burrs
• State-of-the-art CNC precision made
• Made in the U.S.A.
C
Burrs up to 1/4" head diameter are solid carbide.
Sizes larger that 1/4" diameter feature solid
carbide heads brazed to heat treated shanks.
* Diamond cut burrs are recommended for carbon fiber and fiberglass
and are available by special order. Double cut burrs may be effective,
but they carry a greater risk of shredding the fiber weave.
GENERAL USE
• Adjust speeds as needed for optimum performance. Use slower speeds for harder materials
and cutting with long shank burrs. Use higher speeds for cutting with smaller diameter burrs.
• Do not run above maximum speeds. This will cause premature wear and damage to burr teeth.
• Do not run below minimum speeds. This may cause chipping.
• All other tools and collets should be in good condition. Using worn tools will cause chipping.
• Not for use in portable drill motors.
• Apply constant pressure while cutting.
C-3
1/4" Shank
Right Hand Cut
Carbide Burrs
SA
CYLINDRICAL
SHAPE
HEAD SIZE
DIA. x LENGTH
SA-11
SA-12
SA-14
SA-1
SA-1L
SA-2
SA-3
SA-3L
SA-3X
SA-4
SA-5
SA-6
SA-16
SA-7
SA-9
1/8 x 1/2
1/8 x 5/8
3/16 x 5/8
1/4 x 5/8
1/4 x 1
5/16 x 3/4
3/8 x 3/4
3/8 x 1
3/8 x 1-1/2
7/16 x 1
1/2 x 1
5/8 x 1
3/4 x 3/4
3/4 x 1
1x1
Expanded
SB
STOCK #
CYLINDRICAL END CUT
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
SHAPE
HEAD SIZE
DIA. x LENGTH
B71201
B71301
B71212
B71202
B71202B
B71204
B71205
B71205B
B71205C
B71207
B71208
B71209
B71303
B71210
B71211
B71201D
B71301D
B71212D
B71202D
B71202BD
B71204D
B71205D
B71205BD
B71205CD
B71207D
B71208D
B71209D
B71303D
B71210D
B71211D
B71201DTN
B71301DTN
B71212DTN
B71202DTN
B71202BDTN
B71204DTN
B71205DTN
B71205BDTN
B71205CDTN
B71207DTN
B71208DTN
B71209DTN
B71303DTN
B71210DTN
B71211DTN
SB-11
SB-12
SB-14
SB-1
SB-1L
SB-2
SB-3
SB-3L
SB-3X
SB-4
SB-5
SB-6
SB-16
SB-7
SB-9
1/8 x 1/2
1/8 x 5/8
3/16 x 5/8
1/4 x 5/8
1/4 x 1
5/16 x 3/4
3/8 x 3/4
3/8 x 1
3/8 x 1
7/16 x 1
1/2 x 1
5/8 x 1
3/4 x 3/4
3/4 x 1
1x1
1 per pack
Expanded
STOCK #
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
B71291
B71391
B71392
B71292
B71292B
B71293
B71294
B71294B
B71294C
B71295
B71296
B71297
B71398
B71298
B71299
B71291D
B71391D
B71392D
B71292D
B71292BD
B71293D
B71294D
B71294BD
B71294CD
B71295D
B71296D
B71297D
B71398D
B71298D
B71299D
B71291DTN
B71391DTN
B71392DTN
B71292DTN
B71292BDTN
B71293DTN
B71294DTN
B71294BDTN
B71294CDTN
B71295DTN
B71296DTN
B71297DTN
B71398DTN
B71298DTN
B71299DTN
1 per pack
C
SC
SHAPE
HEAD SIZE
DIA. x LENGTH
SC-11
SC-12
SC-13
SC-14
SC-1
SC-2
SC-3
SC-3L
SC-3X
SC-4
SC-5
SC-6
SC-16
SC-7
SC-9
1/8 x 1/2
1/8 x 5/8
5/32 x 5/8
3/16 x 5/8
1/4 x 5/8
5/16 x 3/4
3/8 x 3/4
3/8 x 1
3/8 x 1-1/2
7/16 x 1
1/2 x 1
5/8 x 1
3/4 x 3/4
3/4 x 1
1x1
1 per pack
C-4
CYLINDRICAL RADIUS END
Expanded
SD
STOCK #
BALL
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
SHAPE
HEAD
DIAMETER
B71221
B71333
B71233B
B71220
B71222
B71224
B71225
B71225B
B71225C
B71227
B71228
B71229
B71229C
B71230
B71231
B71221D
B71333D
B71233BD
B71220D
B71222D
B71224D
B71225D
B71225BD
B71225CD
B71227D
B71228D
B71229D
B71229CD
B71230D
B71231D
B71221DTN
B71333DTN
B71233BDTN
B71220DTN
B71222DTN
B71224DTN
B71225DTN
B71225BDTN
B71225CDTN
B71227DTN
B71228DTN
B71229DTN
B71229CDTN
B71230DTN
B71231DTN
SD-11
SD-14
SD-1
SD-2
SD-3
SD-4
SD-5
SD-6
SD-7
SD-9
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
STOCK #
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
B71241
B71350
B71242
B71243
B71244
B71245
B71246
B71247
B71248
B71249
B71241D
B71350D
B71242D
B71243D
B71244D
B71245D
B71246D
B71247D
B71248D
B71249D
B71241DTN
B71350DTN
B71242DTN
B71243DTN
B71244DTN
B71245DTN
B71246DTN
B71247DTN
B71248DTN
B71249DTN
1 per pack
Chipbreaker and Diamond Cut
are available on request.
Micrograin Carbide Burrs - Cont.
SE
SF
OVAL
SHAPE
HEAD SIZE
DIA. x LENGTH
SE-11
SE-1
SE-3
SE-5
SE-6
SE-7
3/16 x 5/16
1/4 x 3/8
3/8 x 5/8
1/2 x 7/8
5/8 x 1
3/4 x 1
STOCK #
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
SHAPE
B71319
B71214
B71215
B71216
B71217
B71218
B71319D
B71214D
B71215D
B71216D
B71217D
B71218D
B71319DTN
B71214DTN
B71215DTN
B71216DTN
B71217DTN
B71218DTN
SF-11
SF-1
SF-3
SF-4
SF-13
SF-5
SF-6
SF-7
SF-14
SF-15
1 per pack
TREE – RADIUS END
HEAD SIZE
DIA. x LENGTH
1/8 x 1/2
1/4 x 5/8
3/8 x 3/4
7/16 x 1
1/2 x 3/4
1/2 x 1
5/8 x 1
3/4 x 1
3/4 x 1-1/4
3/4 x 1-1/2
Expanded
STOCK #
SINGLE
CUT
DOUBLE
CUT
B71252B
B71252
B71253
B71354
B71258
B71255
B71256
B71257
B71351
B71259
B71252BD
B71252D
B71253D
B71354D
B71258D
B71255D
B71256D
B71257D
B71351D
B71259D
DOUBLE CUT
TiN COATED
B71252BDTN
B71252DTN
B71253DTN
B71354DTN
B71258DTN
B71255DTN
B71256DTN
B71257DTN
B71351DTN
B71259DTN
1 per pack
TREE – POINTED END
SHAPE
HEAD SIZE
DIA. x LENGTH
SG-1
SG-2
SG-3
SG-13
SG-5
SG-6
SG-7
SG-15
1/4 x 5/8
5/16 x 3/4
3/8 x 3/4
1/2 x 3/4
1/2 x 1
5/8 x 1
3/4 x 1
3/4 x 1-1/2
STOCK #
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
B71261
B71262
B71263
B71364
B71265
B71266
B71267
B71268
B71261D
B71262D
B71263D
B71364D
B71265D
B71266D
B71267D
B71268D
B71261DTN
B71262DTN
B71263DTN
B71364DTN
B71265DTN
B71266DTN
B71267DTN
B71268DTN
FLAME
SHAPE
HEAD SIZE
DIA. x LENGTH
SH-1
SH-2
SH-5
SH-6
SH-7
1/4 x 5/8
5/16 x 3/4
1/2 x 1-1/4
5/8 x 1-7/16
3/4 x 1-5/8
STOCK #
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
B71271
B71272
B71273
B71274
B71275
B71271D
B71272D
B71273D
B71274D
B71275D
B71271DTN
B71272DTN
B71273DTN
B71274DTN
B71275DTN
C
1 per pack
1 per pack
SJ
Expanded
60O CONE
SHAPE
HEAD SIZE
DIA. x LENGTH
SJ-1
SJ-2
SJ-3
SJ-5
SJ-6
SJ-7
SJ-9
1/4 x 3/16
5/16 x 5/16
3/8 x 5/16
1/2 x 7/16
5/8 x 9/16
3/4 x 11/16
1 x 15/16
1 per pack
SH
Carbide Burrs
SG
SK
STOCK #
SINGLE
CUT
DOUBLE
CUT
B71260A
B71305
B71312
B71313
B71314
B71315
B71316
B71260AD
B71305D
B71312D
B71313D
B71314D
B71315D
B71316D
DOUBLE CUT
TiN COATED
B71260ADTN
B71305DTN
B71312DTN
B71313DTN
B71314DTN
B71315DTN
B71316DTN
Expanded
90O CONE
SHAPE
HEAD SIZE
DIA. x LENGTH
SK-1
SK-2
SK-3
SK-5
SK-6
SK-7
SK-9
1/4 x 1/8
5/16 x 3/16
3/8 x 3/16
1/2 x 1/4
5/8 x 5/16
3/4 x 3/8
1 x 1/2
STOCK #
SINGLE
CUT
DOUBLE
CUT
B71321
B71321B
B71322
B71323
B71324
B71325
B71326
B71321D
B71321BD
B71322D
B71323D
B71324D
B71325D
B71326D
DOUBLE CUT
TiN COATED
B71321DTN
B71321BDTN
B71322DTN
B71323DTN
B71324DTN
B71325DTN
B71326DTN
1 per pack
Chipbreaker and Diamond Cut are available on request.
C-5
Micrograin Carbide Burrs - Cont.
SL
SM
14O TAPER /CONE – RADIUS END
SHAPE
HEAD SIZE
DIA. x LENGTH
SL-1
SL-2
SL-3
SL-4
SL-5
SL-6
SL-7
1/4 x 5/8
5/16 x 7/8
3/8 x 1-1/16
1/2 x 1-1/8
5/8 x 1-3/16
5/8 x 1-5/16
3/4 x 1-1/2
STOCK #
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
SHAPE
B71281
B71282
B71283
B71284
B71287A
B71285
B71286
B71281D
B71282D
B71283D
B71284D
B71287AD
B71285D
B71286D
B71281DTN
B71282DTN
B71283DTN
B71284DTN
B71287ADTN
B71285DTN
B71286DTN
SM-1
SM-2
SM-3
SM-4
SM-5
SM-6
Carbide Burrs
1 per pack
C
MICROGRAIN CARBIDE
BURR SETS
8 Pc.
Set
DOUBLE
CUT
DOUBLE
CUT
TiN COATED
B81
B81TN
C-6
1/4" Shank 1/4" Head
Contains one each:
SA-1, SC-1, SD-1, SE-1
SF-1, SG-1, SL-1, SM-1
DOUBLE
CUT
DOUBLE CUT
TiN COATED
B71233
B71234
B71235
B71236
B71237
B71238
B71233D
B71234D
B71235D
B71236D
B71237D
B71238D
B71233DTN
B71234DTN
B71235DTN
B71236DTN
B71237DTN
B71238DTN
INVERTED CONE
HEAD SIZE
DIA. x LENGTH
SN-1
SN-2
SN-4
SN-6
SN-7
1/4 x 5/16
3/8 x 3/8
1/2 x 1/2
5/8 x 3/4
3/4 x 5/8
STOCK #
SINGLE
CUT
DOUBLE
CUT
DOUBLE CUT
TiN COATED
B71276
B71277
B71278
B71279
B71280
B71276D
B71277D
B71278D
B71279D
B71280D
B71276DTN
B71277DTN
B71278DTN
B71279DTN
B71280DTN
1 per pack
1/4" Shank 1/2" Head
Contains one each:
SA-5, SC-5, SD-5, SE-5,
SF-5, SG-5, SL-4, SM-5
22O
14O
10O
28O
28O
31O
SHAPE
SET DESCRIPTION
STOCK #
8 Pc.
Set
1/4 x 1/2
1/4 x 3/4
1/4 x 1
3/8 x 5/8
1/2 x 7/8
5/8 x 1
STOCK #
SINGLE
CUT
Expanded
BLOW MOLDED CASE
SET DESCRIPTION
HEAD SIZE
DIA. x
ANGLE
LENGTH
1 per pack
SN
Chipbreaker and Diamond Cut
are available on request.
TAPER /CONE – POINTED END
B82
B82TN
STOCK #
1/4" Shank Burrs
12 Pc.
Set
Contains one each:
SA-1, SA-14, SB-1, SC-1, SC-14, SD-1,
SE-1, SF-1, SG-1, SH-1, SJ-1, SL-1
Single Cut
Double Cut
16 Pc.
Set
Contains one each:
SA-1, SA-3, SA-5, SC-1, SC-3, SC-5,
SD-3, SD-5, SE-3, SF-1, SF-3, SF-5,
SG-1, SG-3, SL-3, SL-4
Single Cut
Double Cut
B71287
B71287D
1/4" Shank Burrs
B71290
B71290D
Micrograin Carbide Burrs – Long Shank
LONG SHANK BURRS
SHANK DIA. 1/4" • LENGTH 6" • SINGLE CUT • DOUBLE CUT
SHAPE
HEAD SIZE
DIA. x LENGTH
STOCK #
SINGLE
CUT
DOUBLE
CUT
A-CYLINDRICAL
SA-1L6
SA-3L6
SA-5L6
1/4 x 5/8
3/8 x 3/4
1/2 x 1
B71202L
B71205L
B71208L
B71202DL
B71205DL
B71208DL
B-CYLINDRICAL END
CUT CUT
B - CYLINDRICAL
END
SB-1L6
SB-3L6
SB-5L6
1/4 x 5/8
3/8 x 3/4
1/2 x 1
B71292L
B71294L
B71296L
B71292DL
B71294DL
B71296DL
SC-1L6
SC-3L6
SC-5L6
1/4 x 5/8
3/8 x 3/4
1/2 x 1
B71222L
B71225L
B71228L
B71222DL
B71225DL
B71228DL
D D-BALL
- BALL
SD-1L6
SD-3L6
SD-5L6
1/4
3/8
1/2
B71242L
B71244L
B71246L
all hard to reach work .
• Smaller diameter heads are ideal
for small components .
• Large diameter heads are suitable
for deep applications, such as engine
block work .
When working with long shank burrs,
the burr must be in contact with the
workpiece (or inserted in the bore or
slot to be machined) before the
machine is turned on. As a rule,
the tool must remain in contact with
the workpiece for as long as the
machine is running. Failure to observe
this procedure may result in shank
failure and hence, an increased
accident risk.
B71242DL
B71244DL
B71246DL
E E- -OVAL
OVAL
SE-1L6
SE-3L6
SE-5L6
1/4 x 3/8
3/8 x 5/8
1/2 x 7/8
B71214L
B71215L
B71216L
B71214DL
B71215DL
B71216DL
C
F-TREE
RAD . END END
F - TREE
RADIUS
SF-1L6
SF-3L6
SF-5L6
1/4 x 5/8
3/8 x 3/4
1/2 x 1
B71252L
B71253L
B71255L
Carbide Burrs - Long Shank
C-CYLINDRICAL RADIUS
END END
C - CYLINDRICAL
RADIUS
Features: • Long shank burrs are suitable for
B71252DL
B71253DL
B71255DL
G - TREEPOINTED
POINTED END
G - TREE
END
SG-1L6
SG- 3L6
SG-5L6
1/4 x 5/8
3/8 x 3/4
1/2 x 1
B71261L
B71263L
B71265L
B71261DL
B71263DL
B71265DL
FLAME
H H- -FLAME
SH-2L6
SH -5L6
5/16 x 3/4
1/2 x 1-1/4
L - TAPER
SL-1L6
SL-3L6
SL-4L6
B71272L
B71273L
L-TAPER
CONE CONE
POINTED
1/4 x 5/8
3/8 x 1-1/16
5/8 x 1-3/16
B71281L
B71283L
B71284L
B71272DL
B71273DL
END
Longer shanks
up to 10" are available.
B71281DL
B71283DL
B71284DL
TAPER/CONE
M -MTAPER
CONE
SM-1L6
SM-3L6
SM-5L6
1/4 x 1/2
1/4 x 1
1/2 x 7/8
B71233L
B71235L
B71237L
B71233DL
—
B71237DL
1 per pack
C-7
Micrograin Carbide Burrs – Miniature Series
Single Cut
Features: • Ideal for delicate work such as engraving .
• Suitable for use in pencil grinders .
• Use for deburring, sculpting and removing material
in small areas .
SA
SB
SC
SD
SE
SF
SG
SM
SN
Carbide Burrs - Miniature Series
1/4" HEAD 1/8" SHANK
SHAPE
HEAD SIZE
DIA. x LENGTH
STOCK #
SHAPE
SA-51
SB-51
SC-51
SD-51
SE-51
1/4 x 1/2
1/4 x 3/16
1/4 x 1/2
1/4 x 7/32
1/4 x 3/8
B71203
B71219
B71223
B71240
B71269
SF-51
SG-51
SM-51
SN-51
C
SB
SC
SD
SE
HEAD SIZE
DIA. x LENGTH
1/4
1/4
1/4
1/4
x
x
x
x
STOCK #
1/2
1/2
1/2
1/4
B71250
B71260
B71239
B71445
1 per pack
1 per pack
SA
Expanded
SF
SG
SH
SJ
SK
SL
SM
1/8" HEAD 1/8" SHANK
SHAPE
HEAD SIZE
DIA. x LENGTH
SA-41
SA-42
SA-43
SB-41
SB-43
SC-41
SC-42
SD-41
SD-42
SE-41
SF-41
SF-42
SG-41
1/16 x 1/4
3/32 x 7/16
1/8 x 9/16
1/16 x 1/4
1/8 x 9/16
3/32 x 7/16
1/8 x 9/16
3/32 x 3/32
1/8 x 1/8
1/8 x 7/32
1/8 x 1/4
1/8 x 1/2
1/8 x 1/4
1 per pack
Expanded
STOCK #
SHAPE
HEAD SIZE
DIA. x LENGTH
B71205G
B71206
B71213
B71232
B71232B
B71226
B71254
B71239B
B71240A
B71270
B71251
B71251B
B71264
SG-42
SG-43
SG-44
SH-41
SJ-42
SK-42
SL-41
SL-42
SM-41
SM-42
SM-43
SN-41
SN-42
1/8 x 5/16
1/8 x 3/8
1/8 x 1/2
1/8 x 1/4
1/8 x 3/32
1/8 x 1/16
1/8 x 3/8
1/8 x 1/2
1/8 x 11/32
1/8 x 7/16
1/8 x 5/8
3/32 x 1/8
1/8 x 3/16
STOCK #
B71264B
B71264C
B71264E
B71271A
B71401
B71405
B71410
B71415
B71420
B71425
B71430
B71435
B71440
1 per pack
SET DESCRIPTION
8 Pc.
Set
10 Pc.
Set
STOCK #
1/4" Head 1/8" Shank
Contains one each:
SA-51, SB-51, SC-51, SD-51,
SE-51, SF-51, SG-51, SM-51
B71288
1/8" Head 1/8" Shank
Contains one each:
SA-42, SA-43, SB-41, SC-41, SC-42,
SD-42, SE-41, SF-41, SG-41, SH-41
Burrs available TiN coated. Details on request.
C-8
SN
B71289A
Micrograin Carbide Burrs – Alumacut
For Non-Ferrous Metals
Features: • Suitable for deburring softer non-ferrous metals and non-metallic materials .
• Coarse cut for use on soft, stringy materials such as aluminum, magnesium,
plastics, hard rubber, hard woods, etc .
• Wide clearance and end mill type geometry of the flutes promotes fast stock
removal with minimum loading .
1/4" Shank
Right Hand Cut
SA/NF
SC/NF
CYLINDRICAL
HEAD SIZE
DIA. x LENGTH
SA-1NF
SA-3NF
SA-5NF
SA-6NF
SA-7NF
*SA-7NFR
1/4 x 5/8
3/8 x 3/4
1/2 x 1
5/8 x 1
3/4 x 1
3/4 x 1
1 per pack
STOCK #
B71202A
B71205A
B71208A
B71209A
B71210A
B71210BA
SHAPE
HEAD SIZE
DIA. x LENGTH
SC-1NF
SC-3NF
SC-5NF
SC-6NF
SC-7NF
*SC-7NFR
1/4 x 5/8
3/8 x 3/4
1/2 x 1
5/8 x 1
3/4 x 1
3/4 x 1
1 per pack
*3/8" shank
SE/NF
Expanded
STOCK #
B71222A
B71225A
B71228A
B71229A
B71230A
B71230BA
*3/8" shank
SD/NF
OVAL
Expanded
Expanded
BALL
SHAPE
HEAD SIZE
DIA. x LENGTH
STOCK #
SHAPE
HEAD SIZE
DIAMETER
STOCK #
SE-1NF
SE-3NF
SE-5NF
SE-6NF
SE-7NF
1/4 x 3/8
3/8 x 5/8
1/2 x 7/8
5/8 x 1
3/4 x 1
B71214A
B71215A
B71216A
B71217A
B71218A
SD-1NF
SD-3NF
SD-5NF
SD-6NF
SD-7NF
*SD-7NFR
1/4
3/8
1/2
5/8
3/4
3/4
B71242A
B71244A
B71246A
B71247A
B71248A
B71248BA
1 per pack
1 per pack
SF/NF
C
*3/8" shank
SL/NF
TREE – RADIUS END
SHAPE
HEAD SIZE
DIA. x LENGTH
SF-1NF
SF-3NF
SF-5NF
SF-6NF
SF-7NF
*SF-7NFR
SF-14NF
1/4 x 5/8
3/8 x 3/4
1/2 x 1
5/8 x 1
3/4 x 1
3/4 x 1
3/4 x 1
1 per pack
Carbide Burrs - Alumacut
SHAPE
CYLINDRICAL
RADIUS END
Expanded
*3/8" shank
Expanded
14O TAPER CONE RADIUS END
STOCK #
SHAPE
HEAD SIZE
DIA. x LENGTH
B71252A
B71253A
B71255A
B71256A
B71257A
B71258BA
B71258A
SL-1NF
SL-3NF
SL-4NF
SL-5NF
SL-6NF
1/4 x 5/8
3/8 x 1-1/16
1/2 x 1-1/8
5/8 x 1-3/16
5/8 x 1-5/16
NEW!
STOCK #
B71281A
B71283A
B71284A
B71287AA
B71285A
1 per pack
5 PC. ALUMACUT
BURR SET
DESCRIPTION
STOCK #
Contains one each:
SA-3NF SA-5NF SD-5NF
SE-5NF SF-3NF
B71290A
C-9
Carbide Burr Dispenser
42 PC. CARBIDE BURR DISPENSER
(Three Drawer Cabinet)
Features:
• Contains 21 of the most popular burr styles.
• All steel welded construction with heavy gauge
steel drawers with vinyl dividers .
• Organized dispenser makes burrs readily accessible .
• Dimensions: 14-5/8" W x 7-3/8" D x 7-3/4" H .
• Baked epoxy finish for long life.
Burr Dispenser • Fiberglass Routers
Stock # BD42
TYPE
QTY.
STOCK #
SA-1 CYLINDRICAL
2
B71202D
SA-3 CYLINDRICAL
2
B71205D
SA-5 CYLINDRICAL
2
SC-1 CYLINDRICAL RADIUS END
2
NEW!
TYPE
QTY.
STOCK #
SF-1 TREE RADIUS END
2
B71252D
2
B71253D
B71208D
2
B71255D
B71222D
SG-1 TREE POINTED END
2
B71261D
2
B71225D
SG-5 TREE POINTED END
2
B71265D
2
B71228D
SL-1 14° TAPER/CONE RADIUS END
2
B71281D
SD-1 BALL
2
B71242D
SL-4 14° TAPER/CONE RADIUS END
2
B71284D
SD-3 BALL
2
B71244D
SM-4 TAPER/CONE FLAT END
2
B71236D
SD-5 BALL
2
B71246D
SM-5 TAPER/CONE FLAT END
2
B71237D
SE-1 OVAL
2
B71214D
SE-3 OVAL
2
B71215D
SE-5 OVAL
2
B71216D
BURR DISPENSER
Available without tools.
Stock # DIH13200
Note: All burrs in standard dispenser are double cut.
C
Micrograin Carbide Fiberglass Routers
Straight Shank
Diamond Cut
NO END CUT
BURR END
END MILL END
DRILL END
Features:
• Suitable for cutting fiberglass, epoxies and
similiar composite materials .
STYLE
FGR-1
FGR-1.1
FGR-2
FGR-3
FGR-4
FGR-5
FGR-6
FGR-6.2
FGR-7
FGR-8
FGR-9
1 per pack
C-10
TOOL
DIA.
LENGTH
OF CUT
SHANK
DIA.
OAL
1/16
3/32
1/8
3/16
3/16
1/4
1/4
1/4
5/16
3/8
1/2
3/16
3/8
1/2
5/8
5/8
3/4
3/4
1
1
1
1
1/8
1/8
1/8
3/16
1/4
1/4
1/4
1/4
5/16
3/8
1/2
1-1/2
1-1/2
1-1/2
2
2
2
2-1/2
3
2-1/2
2-1/2
3
STOCK #
NO END CUT
BURR END
B71701A
B71703A
B71705A
B71707A
B71709A
B71711A
B71713A
B71715A
B71717A
B71719A
B71721A
B71701B
B71703B
B71705B
B71707B
B71709B
B71711B
B71713B
B71715B
B71717B
B71719B
B71721B
END MILL END
B71701C
B71703C
B71705C
B71707C
B71709C
B71711C
B71713C
B71715C
B71717C
B71719C
B71721C
DRILL END
B71701D
B71703D
B71705D
B71707D
B71709D
B71711D
B71713D
B71715D
B71717D
B71719D
B71721D
HSS Burrs • Rotary Files
High-Speed Steel
Features:
1/4" Shank
Right Hand Cut
SHAPE
• Recommended for use on non-ferrous and other soft materials .
HEAD SIZE
DIA. x LENGTH
IN.
STOCK #
SHAPE
A - CYLINDRICAL
1/8 x 1/2
1/4 x 1
1/4 x 1-1/2
3/8 x 1
3/8 x 1-1/2
1/2 x 1
1/2 x 1-1/2
5/8 x 1
3/4 x 3/4
1x1
AE - CYLINDRICAL END CUT
BH74201
BH74202
BH74203
BH74204
BH74205
BH74206
BH74207
BH74208
BH74209
BH74210
AE-100
AE-106
AE-107
AE-109
AE-110
AE-111
AE-112
AE-114
AE-116
AE-118
1/8
1/4
5/16
3/8
1/2
3/4
x
x
x
x
x
x
1/8
1/4
5/16
3/8
1/2
3/4
C-700
C-710
C-714
C-716
C-718
C-722
BH74215
BH74216
BH74217
BH74218
BH74219
BH74220
1/4 x 3/4
1/2 x 1-1/8
3/4 x 1-1/4
1-1/8 x 1-3/4
BH74221
BH74222
BH74223
BH74224
Q-901
Q-903
Q-905
Q-909
Q-911
Q-913
Q-915
T - TREE POINTED
T-521
T-523
T-525
T-527
T-529
1/4 x 3/4
3/8 x 3/4
1/2 x 3/4
1/2 x 1-1/8
5/8 x 1
BH74226
BH74227
BH74228
BH74229
BH74230
1/2 x 1/2
3/4 x 1/2
D-404
D-406
1/2 x 60O ANGLE
5/8 x 60O ANGLE
1/8 x 1/2
1/4 x 1
3/8 x 1
3/8 x 1-1/2
1/2 x 1
5/8 x 1
BH74251
BH74252
BH74254
BH74255
BH74256
BH74257
3/16 x 5/16
1/4 x 7/16
3/8 x 5/8
1/2 x 7/8
5/8 x 1
3/4 x 1
1 x 1-3/8
BH74261
BH74262
BH74263
BH74264
BH74265
BH74266
BH74267
C
H - CONE SHAPE
H-223
H-226
H-229
H-232
H-235
H-238
H-241
H-244
H-245
I - INVERTED CONE
I-471
I-472
BH74240
BH74241
BH74242
BH74243
BH74244
BH74245
BH74246
BH74247
BH74248
BH74249
Q - OLIVE SHAPED
R - TREE-RADIUS NOSE
R-503
R-507
R-509
R-511
1/8 x 1/2
1/4 x 1
1/4 x 1-1/2
3/8 x 1
3/8 x 1-1/2
1/2 x 1
1/2 x 1-1/2
5/8 x 1
3/4 x 3/4
1x1
C - CYLINDRICAL ROUND
B - BALL SHAPE
B-600
B-602
B-603
B-604
B-606
B-609
STOCK #
HSS Burrs • Rotary Files
A-100
A-106
A-107
A-109
A-110
A-111
A-112
A-114
A-116
A-118
HEAD SIZE
DIA. x LENGTH
IN.
BH74235
BH74236
D - DEBURRING
BH74238
BH74239
1/4 x 1/2
1/4 x 3/4
1/4 x 1
1/4 x 1-1/4
5/16 x 1
3/8 x 5/8
1/2 x 7/8
5/8 x 1
1 x 1-3/8
BH74270
BH74271
BH74272
BH74273
BH74274
BH74275
BH74276
BH74277
BH74278
1 per pack
1 per pack
7 PC. SUPER HSS BURR SET
DESCRIPTION
STOCK #
Contains one each:
A-116
T-529
B-606
H-244
C-722
R-507
Q-915
BH7
C-11
Deburring Tools
ISRAEL
ZIP / BURR™ SYSTEM
BLADES FOR
DEBURRING TOOL
Zip / Burr™ “B” Set for “B” Series Blades
STANDARD DUTY “B” SERIES
BLADES PER PKG.
• Takes all “B” series blades .
• Includes one B-10 blade and one
B-20 blade .
• Handle has storage compartment
for spare blades .
• Holder telescopes from 1/2" to 5" .
• Blade can be inserted at 90O for
deburring cross holes .
• Handle has lifetime guarantee .
Complete Zip / Burr “B” Set
1 Per Pack
10
10
Deburring Tools
• Includes one E-100 blade,
one E-200 blade and one
E-300 blade .
Complete Zip / Burr “E” Set
1 Per Pack
DT22620
MULTI / BURR DEBURRING TOOLS
10
• Blades can be stored in
lightweight plastic handle .
• Blades easily changed by
depressing locking button .
B-30
10
HSS; for internal deburring,
especially for inaccessible locations .
B-60
E-100
1 Per Pack
DT22022
E-100A
E-1500
Box of 10
E-200
DT22050
E-300
10 Blades per pack
• Large reversible countersink includes one
R-2 blade and has a range of 13/64" - 11/32" .
Complete Standard Reversible Countersink 1 Per Pack DT22465
R-2 Standard Blade Only
C-12
1 Per Pack DT22139
DT22030
Heavy Duty HSS for brass
and cast iron .
10
REVERSIBLE COUNTERSINK
DT22046
Heavy Duty HSS for holes
as small as 1/16" dia . in steel
and aluminum .
10
• Handles almost every deburring job. • Consists of Heavy Duty E-100 blade,
handle, and handy pocket clip .
• Useable for removing burrs from
steel and aluminum .
DT22034
Heavy Duty M42 steel .
Good for plastic & hard materials .
10
Slim-Grip Disposable Burr
DT22025
Heavy Duty HSS for steel
& aluminum .
10
• Handle has lifetime guarantee .
SLIM-GRIP DEBURRING TOOLS
Slim-Grip Disposable Burr
DT22135
HEAVY DUTY “E” SERIES
• Comes with five blades—
one each of E-100, E-200, E-350
E-101 and E-102 .
Plastic handle complete w/ 5 blades
DT22130
HSS; removes internal & external
burrs simultaneously from holes
drilled into tubing & sheet metal .
10
C
DT22120
HSS for brass & cast iron;
can rotate clockwise and
counterclockwise .
10
Multi / Burr-5
DT22109
HSS for steel, aluminum
and plastic .
B-10A
B-20
• Same features as “B” set but takes
all heavy duty “E” series blades .
• Blade can’t be inserted at 90˚.
DT22110
HSS for steel & aluminum .
B-10
DT22600
Zip / Burr™ Heavy Duty “E” Set for “E” Series Blades
STOCK #
DT22040
Heavy Duty HSS; removes
internal and external burrs
simultaneously from holes
drilled into tubing & sheet metal .
End Mills – Information & Coatings
The End Mill is the most-used tool in the tool crib arsenal in any machine shop . It is used for milling, profiling,
contouring, slotting, counterboring, drilling and reaming.
END MILL TYPES
END MILL MATERIALS
• Finishing end mills
• High-speed steel (HSS)
• Ball end mills
• Powder metal (PM) cobalt
• Square end mills
• Cobalt-M42 (8% cobalt HSS)
• Taper body mills
• Roughing end mills
(Coarse tooth & fine tooth)
• Solid carbide (micrograin)
• Carbide tipped
Max. Operating Temperature
END MILL SELECTION SUMMARY
•
•
•
•
•
•
Select the shortest possible end mill for the greatest rigidity .
Select two or three flutes for slotting or heavy stock removal.
Select multiple flutes for finishing and greater rigidity.
Use the largest diameter possible for added strength and rigidity.
Apply coatings for higher feeds, speeds and tool life .
Use cobalt, PM/Plus and carbide for tougher and harder materials,
and for high production applications .
Uncoated
TiN
TiAlN
750°F
1110°F
1450°F
FLUTE TYPE
• Two Flute: The two-flute end mill has the greatest amount of flute space allowing for more chip carrying capacity. Used primarily
in slotting and pocketing of non-ferrous materials where chip removal is a concern .
• Three Flute: While this tool has the same flute space as two flutes, it has a larger cross-sectional area providing for greater strength
and the ability to pocket and slot both ferrous and non-ferrous materials .
• Four / Multiple Flute: Ideal for peripheral and finish milling . The additional flutes allow faster feed rates, but due to the reduced flute
space, chip removal may be a problem . Produces a much finer finish than two and three flute tools .
MILLING FORMULAE
RPM = SFM x 3.82 / tool diameter
IPM = RPM x number of flutes x chip load
Chip load = IPM / RPM x number of flutes
SFM = .262 x tool diameter x RPM
End Mills – Information & Coatings
Standard Helix Angle is 30°
Mill dia . Tolerance +0 .000
-0 .002
C
• Revolutions per minute (RPM): Number of revolutions the cutter has in one minute .
• Inches per minute (IPM): Number of inches the cutter passes through the workpiece
in one minute .
• Chip load: Amount each flute cuts during a single revolution of the cutting tool .
• Surface feet per minute (SFM): Number of feet a given point on the circumference
of the cutter travels per minute . This is the measure of cutting speed of the end mill
used in the United States.
SURFACE TREATMENT AND COATINGS
Description
Characteristics
Application
TiN
•
•
•
•
TiCN
• Titanium Carbonitride: Blue-Grey color, abrasion
resistant coating .
• Consists of an extremely hard coating on surface of tool.
• Provides excellent wear resistance.
• Recommended for Silicon Aluminum, brass and
bronze applications, cast iron and alloy steels .
• Very effective at higher speeds.
AlTiN
• Aluminum Titanium Nitride: Blue-Black color,
multi-layered high heat-resistant coating .
• Provides excellent wear resistance.
• Forms an aluminum oxide layer at high speeds and
elevated temperatures .
• Recommended for semi and dry milling applications
in high temperature alloys and hardened steel materials .
• Very effective at higher speeds and in some tapping
applications .
Titanium Nitride: Gold color, General Purpose coating.
Consists of a very hard coating on surface of tool.
Provides excellent wear resistance with good lubricity.
Reduces friction and prevents galling .
• Recommended for ferrous and non-metallic
materials .
C-13
Micrograin Solid Carbide End Mills
30O Right Hand Helix
Right Hand Cut
Features: • Micrograin solid carbide end mills provide outstanding
performance and allow optimum cutting speeds and feeds,
high rigidity and minimum tool deflection .
• Designed for aggressive milling of most materials.
Two Flute, Single End,
Center Cutting
Square End
Regular Length
MILL
DIA.
C
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
SHANK FLUTE
DIA. LENGTH
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/32
1/8
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
7/8
7/8
OAL
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
STOCK #
UNCOATED
AlTiN COATED
SC61300
SC61300A
SC61301
SC61302
SC61303
SC61304
SC61305
SC61306
SC61307
SC61308
SC61309
SC61310
SC61311
SC61312
SC61313
SC61314
SC61315
SC61316
SC61317
SC61300AL
SC61300AAL
SC61301AL
SC61302AL
SC61303AL
SC61304AL
SC61305AL
SC61306AL
SC61307AL
SC61308AL
SC61309AL
SC61310AL
SC61311AL
SC61312AL
SC61313AL
SC61314AL
SC61315AL
SC61316AL
SC61317AL
SHANK FLUTE
DIA. LENGTH
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
9/16
5/8
3/4
3/4
7/8
1
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
9/16
5/8
11/16
3/4
7/8
1
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
OAL
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3-1/2
3-1/2
4
4
4
4
Right Hand Cut
Center Cutting
Center Cutting
Square End
Square End
MILL
DIA.
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1 per tube
SHANK FLUTE
DIA. LENGTH
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
3/4
1-1/8
1-1/2
1-5/8
2
2
3
3
3
3
OAL
2
3
4
4
4
4
6
6
6
6
UNCOATED
AlTiN COATED
SCL61351
SCL61353
SCL61355
SCL61357
SCL61359
SCL61361
SCL61364
SCL61366
SCL61368
SCL61370
SCL61351AL
SCL61353AL
SCL61355AL
SCL61357AL
SCL61359AL
SCL61361AL
SCL61364AL
SCL61366AL
SCL61368AL
SCL61370AL
AlTiN COATED
SC61318
SC61319
SC61320
SC61321
SC61322
SC61323
SC61324
SC61325
SC61326
SC61327
SC61328
SC61329
SC61330
SC61331
SC61332
SC61333
SC61334
SC61335
SC61318AL
SC61319AL
SC61320AL
SC61321AL
SC61322AL
SC61323AL
SC61324AL
SC61325AL
SC61326AL
SC61327AL
SC61328AL
SC61329AL
SC61330AL
SC61331AL
SC61332AL
SC61333AL
SC61334AL
SC61335AL
Stub Length
Expanded
STOCK #
STOCK #
UNCOATED
1 per tube
Right Hand Cut
X-Long Length
C-14
MILL
DIA.
Expanded
MILL
DIA.
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1 per tube
SHANK FLUTE
DIA. LENGTH
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
3/4
1
OAL
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
3
2-1/2
3
3
Expanded
STOCK #
UNCOATED
AlTiN COATED
SCS61341
SCS61342
SCS61343
SCS61344
SCS61345
SCS61346
SCS61347
SCS61348
SCS61349
SCS61350
SCS61351
SCS61352
SCS61353
SCS61341AL
SCS61342AL
SCS61343AL
SCS61344AL
SCS61345AL
SCS61346AL
SCS61347AL
SCS61348AL
SCS61349AL
SCS61350AL
SCS61351AL
SCS61352AL
SCS61353AL
30O Right Hand Helix,
Right Hand Cut
performance and allow optimum cutting speeds and feeds,
Metric with Metric Shanks
Square End
TOLERANCE + .000/- .002
Regular Length
STOCK #
OAL
MM
UNCOATED
AlTiN COATED
3 .00
3 .00
3 .00
4 .00
4 .00
5 .00
5 .00
6 .00
8 .00
8 .00
38
38
38
50
50
50
50
63
63
63
SCM91302
SCM91304
SCM91306
SCM91308
SCM91310
SCM91312
SCM91314
SCM91316
SCM91318
SCM91320
SCM91302AL
SCM91304AL
SCM91306AL
SCM91308AL
SCM91310AL
SCM91312AL
SCM91314AL
SCM91316AL
SCM91318AL
SCM91320AL
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
6
7
12
12
14
14
16
19
19
19
Right Hand Cut
MILL
SHANK FLUTE
DIA. MM DIA. MM LENGTH
OAL
MM
UNCOATED
AlTiN COATED
10 .00
10 .00
11 .00
12 .00
14 .00
16 .00
18 .00
20 .00
22 .00
70
70
70
75
88
88
100
100
100
SCM91322
SCM91324
SCM91325
SCM91326
SCM91327
SCM91328
SCM91329
SCM91330
SCM91331
SCM91322AL
SCM91324AL
SCM91325AL
SCM91326AL
SCM91327AL
SCM91328AL
SCM91329AL
SCM91330AL
SCM91331AL
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
22.00
22
22
25
25
30
32
36
38
38
MILL
SHANK FLUTE
Expanded
STOCK #
1 per tube
performance and allows optimum cutting speeds and feeds,
• Ball nose geometry for inside corner radius and CNC contouring.
Ball Nose,
Center Cutting
C
Ball End
Regular Length
MILL
DIA.
1/32
3/64
1/16
5/64
3/32
7/64
1/8
5/32
3/16
7/32
1/4
SHANK FLUTE
DIA. LENGTH
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
1/4
1/4
3/32
1/8
1/4
1/4
3/8
3/8
1/2
9/16
5/8
5/8
3/4
OAL
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2-1/2
2-1/2
STOCK #
UNCOATED
AlTiN COATED
SCB61365
SCB61366
SCB61367
SCB61368
SCB61369
SCB61370
SCB61371
SCB61372
SCB61373
SCB61374
SCB61375
SCB61365AL
SCB61366AL
SCB61367AL
SCB61368AL
SCB61369AL
SCB61370AL
SCB61371AL
SCB61372AL
SCB61373AL
SCB61374AL
SCB61375AL
MILL
DIA.
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
Expanded
SHANK FLUTE
DIA. LENGTH
5/16
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
7/8
7/8
7/8
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
OAL
2-1/2
2-1/2
2-1/2
2-1/2
3
3-1/2
3-1/2
4
4
4
STOCK #
UNCOATED
AlTiN COATED
SCB61376
SCB61377
SCB61378
SCB61379
SCB61380
SCB61381
SCB61382
SCB61383
SCB61384
SCB61385
SCB61376AL
SCB61377AL
SCB61378AL
SCB61379AL
SCB61380AL
SCB61381AL
SCB61382AL
SCB61383AL
SCB61384AL
SCB61385AL
1 per tube
C-15
Right Hand Cut
Two Flute, Double End,
Center Cutting
Center Cutting
Square End
Square End
Regular Length
MILL
DIA.
1/32
3/64
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
SHANK FLUTE
DIA. LENGTH
1/8
1/8
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
3/32
1/8
3/16
1/4
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1
OAL
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
3-1/2
3-1/2
4
4
Stub Length
Expanded
STOCK #
UNCOATED
AlTiN COATED
MILL
DIA.
DEC66801
DEC66802
DEC66803
DEC66804
DEC66805
DEC66807
DEC66809
DEC66811
DEC66813
DEC66815
DEC66817
DEC66819
DEC66821
DEC66801AL
DEC66802AL
DEC66803AL
DEC66804AL
DEC66805AL
DEC66807AL
DEC66809AL
DEC66811AL
DEC66813AL
DEC66815AL
DEC66817AL
DEC66819AL
DEC66821AL
1/32
3/64
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
1 per tube
SHANK FLUTE
DIA. LENGTH
1/8
1/8
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
1/16
3/32
1/8
3/16
1/4
5/16
3/8
1/2
1/2
1/2
1/2
1/2
5/8
OAL
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
Expanded
STOCK #
UNCOATED
AlTiN COATED
DEC66830
DEC66831
DEC66832
DEC66833
DEC66839
DEC66841
DEC66843
DEC66845
DEC66847
DEC66849
DEC66851
DEC66853
DEC66855
DEC66830AL
DEC66831AL
DEC66832AL
DEC66833AL
DEC66839AL
DEC66841AL
DEC66843AL
DEC66845AL
DEC66847AL
DEC66849AL
DEC66851AL
DEC66853AL
DEC66855AL
1 per tube
C
60O High Helix,
Right Hand Cut
Features: • Increased cutting edge engagement reduces vibration and
improves surface finish .
• Engineered for plunging, slotting and peripheral milling applications.
Three Flute, Single End,
Center Cutting
Regular Length
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OAL
1/4
5/16
3/8
1/2
5/8
3/4
1/4
5/16
3/8
1/2
5/8
3/4
3/4
13/16
1
1
1-1/4
1-1/2
2-1/2
2-1/2
2-1/2
3
3-1/2
4
1 per tube
C-16
Expanded
STOCK #
UNCOATED
AlTiN COATED
SCH91628
SCH91630
SCH91632
SCH91636
SCH91640
SCH91642
SCH91628AL
SCH91630AL
SCH91632AL
SCH91636AL
SCH91640AL
SCH91642AL
Right Hand Cut
performance and allows optimum cutting speeds and
feeds, high rigidity and minimum tool deflection .
Four Flute, Single End,
Center Cutting
Square End
Regular Length
MILL
DIA.
SHANK FLUTE
DIA. LENGTH
3/32
1/8
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
7/8
7/8
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
UNCOATED
AlTiN COATED
SC60600
SC60600A
SC60601
SC60602
SC60603
SC60604
SC60605
SC60606
SC60607
SC60608
SC60609
SC60610
SC60611
SC60612
SC60613
SC60614
SC60615
SC60616
SC60617
SC60600AL
SC60600AAL
SC60601AL
SC60602AL
SC60603AL
SC60604AL
SC60605AL
SC60606AL
SC60607AL
SC60608AL
SC60609AL
SC60610AL
SC60611AL
SC60612AL
SC60613AL
SC60614AL
SC60615AL
SC60616AL
SC60617AL
MILL
DIA.
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
9/16
5/8
11/16
3/4
7/8
1
Expanded
SHANK FLUTE
DIA. LENGTH
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
9/16
5/8
3/4
3/4
7/8
1
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
OAL
STOCK #
UNCOATED
AlTiN COATED
SC60618
SC60619
SC60620
SC60621
SC60622
SC60623
SC60624
SC60625
SC60626
SC60627
SC60628
SC60629
SC60630
SC60631
SC60632
SC60633
SC60634
SC60635
SC60618AL
SC60619AL
SC60620AL
SC60621AL
SC60622AL
SC60623AL
SC60624AL
SC60625AL
SC60626AL
SC60627AL
SC60628AL
SC60629AL
SC60630AL
SC60631AL
SC60632AL
SC60633AL
SC60634AL
SC60635AL
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3-1/2
3-1/2
4
4
4
4
1 per tube
Right Hand Cut
Right Hand Cut
Center Cutting
Center Cutting
Square End
Square End
X-Long Length
MILL
DIA.
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1 per tube
SHANK FLUTE
DIA. LENGTH
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
3/4
1-1/8
1-1/2
1-5/8
2
2
3
3
3
3
OAL
2
3
4
4
4
4
6
6
6
6
UNCOATED
AlTiN COATED
SCL60651
SCL60653
SCL60655
SCL60657
SCL60659
SCL60661
SCL60664
SCL60666
SCL60668
SCL60670
SCL60651AL
SCL60653AL
SCL60655AL
SCL60657AL
SCL60659AL
SCL60661AL
SCL60664AL
SCL60666AL
SCL60668AL
SCL60670AL
C
Stub Length
Expanded
STOCK #
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
OAL
STOCK #
MILL
DIA.
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1 per tube
SHANK FLUTE
DIA. LENGTH
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
3/4
1
OAL
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
3
2-1/2
3
3
Expanded
STOCK #
UNCOATED
AlTiN COATED
SCS60641
SCS60642
SCS60643
SCS60644
SCS60645
SCS60646
SCS60647
SCS60648
SCS60649
SCS60650
SCS60651
SCS60652
SCS60653
SCS60641AL
SCS60642AL
SCS60643AL
SCS60644AL
SCS60645AL
SCS60646AL
SCS60647AL
SCS60648AL
SCS60649AL
SCS60650AL
SCS60651AL
SCS60652AL
SCS60653AL
C-17
Right Hand Cut
Right Hand Cut
Metric with Metric Shanks
Ball Nose, Center Cutting
Features:
• Micrograin solid carbide end mills provide outstanding
• Ball nose geometry for inside corner radius and CNC contouring .
Square End
Ball End
TOLERANCE + .000/- .002
Regular Length
C
STOCK #
MILL
SHANK FLUTE
OAL
MM
UNCOATED
AlTiN COATED
3 .00
3 .00
3 .00
4 .00
4 .00
5 .00
5 .00
6 .00
8 .00
8 .00
10 .00
10 .00
11 .00
12 .00
14 .00
16 .00
18 .00
20 .00
22 .00
38
38
38
50
50
50
50
63
63
63
70
70
70
75
88
88
100
100
100
SCM91602
SCM91604
SCM91606
SCM91608
SCM91610
SCM91612
SCM91614
SCM91616
SCM91618
SCM91620
SCM91622
SCM91624
SCM91625
SCM91626
SCM91627
SCM91628
SCM91629
SCM91630
SCM91631
SCM91602AL
SCM91604AL
SCM91606AL
SCM91608AL
SCM91610AL
SCM91612AL
SCM91614AL
SCM91616AL
SCM91618AL
SCM91620AL
SCM91622AL
SCM91624AL
SCM91625AL
SCM91626AL
SCM91627AL
SCM91628AL
SCM91629AL
SCM91630AL
SCM91631AL
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
22.00
6
7
12
12
14
14
16
19
19
19
22
22
25
25
30
32
36
38
38
Regular Length
Expanded
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OAL
1/32
3/64
1/16
5/64
3/32
7/64
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
3/32
1/8
1/4
1/4
3/8
3/8
1/2
5/8
3/4
7/8
7/8
1
1
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2-1/2
2-1/2
2-1/2
2-1/2
3
3-1/2
4
4
Expanded
STOCK #
UNCOATED
AlTiN COATED
SCB60665
SCB60666
SCB60667
SCB60668
SCB60669
SCB60670
SCB60671
SCB60672
SCB60673
SCB60674
SCB60675
SCB60676
SCB60677
SCB60678
SCB60679
SCB60680
SCB60665AL
SCB60666AL
SCB60667AL
SCB60668AL
SCB60669AL
SCB60670AL
SCB60671AL
SCB60672AL
SCB60673AL
SCB60674AL
SCB60675AL
SCB60676AL
SCB60677AL
SCB60678AL
SCB60679AL
SCB60680AL
1 per tube
1 per tube
Micrograin Solid Carbide Corner Radius End Mills
Corner Radius
Right Hand Cut
Features: • Used for generating corner radius on workpiece, eliminating sharp corners.
• Promotes additional strength, longer tool life, resulting in greater productivity.
• Designed for a wide range of ferrous materials, including stainless steels
and high temperarure alloys .
Four Flute, Single End
Regular Length
MILL
DIA.
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
C-18
1 per tube
SHANK FLUTE
DIA. LENGTH
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1/2
5/8
3/4
13/16
1
1
1-1/4
1-1/2
OAL
1-1/2
2
2-1/2
2-1/2
2-1/2
3
3-1/2
4
.015 RADIUS
NEW!
STOCK #
.030 RADIUS
.060 RADIUS
UNCOATED
AlTiN COATED
UNCOATED
AlTiN COATED
UNCOATED
AlTiN COATED
CRM71505
CRM71509
CRM71513
CRM71517
CRM71521
CRM71529
CRM71531
CRM71533
CRM71505AL
CRM71509AL
CRM71513AL
CRM71517AL
CRM71521AL
CRM71529AL
CRM71531AL
CRM71533AL
CRM73005
CRM73009
CRM73013
CRM73017
CRM73021
CRM73029
CRM73031
CRM73033
CRM73005AL
CRM73009AL
CRM73013AL
CRM73017AL
CRM73021AL
CRM73029AL
CRM73031AL
CRM73033AL
CRM70605
CRM70609
CRM70613
CRM70617
CRM70621
CRM70629
CRM70631
CRM70633
CRM70605AL
CRM70609AL
CRM70613AL
CRM70617AL
CRM70621AL
CRM70629AL
CRM70631AL
CRM70633AL
Right Hand Cut
Four Flute, Double End,
Center Cutting
Center Cutting
Features:
Features:
Square End
Square End
Regular Length
1/32
3/64
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
SHANK FLUTE
OAL
DIA. LENGTH
1/8
1/8
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
3/32
1/8
3/16
1/4
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
3-1/2
3-1/2
4
4
UNCOATED
AlTiN COATED
MILL
DIA.
DEC66861
DEC66862
DEC66863
DEC66864
DEC66865
DEC66867
DEC66869
DEC66871
DEC66873
DEC66875
DEC66877
DEC66879
DEC66881
DEC66861AL
DEC66862AL
DEC66863AL
DEC66864AL
DEC66865AL
DEC66867AL
DEC66869AL
DEC66871AL
DEC66873AL
DEC66875AL
DEC66877AL
DEC66879AL
DEC66881AL
1/32
3/64
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
1 per tube
SHANK FLUTE
DIA. LENGTH
1/8
1/8
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
1/16
3/32
1/8
3/16
1/4
5/16
3/8
1/2
1/2
1/2
1/2
1/2
5/8
OAL
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
Expanded
STOCK #
UNCOATED
AlTiN COATED
DEC66883
DEC66885
DEC66887
DEC66889
DEC66891
DEC66892
DEC66893
DEC66894
DEC66895
DEC66896
DEC66897
DEC66898
DEC66899
DEC66883AL
DEC66885AL
DEC66887AL
DEC66889AL
DEC66891AL
DEC66892AL
DEC66893AL
DEC66894AL
DEC66895AL
DEC66896AL
DEC66897AL
DEC66898AL
DEC66899AL
1 per tube
C
Micrograin Solid Carbide High Performance End Mills
Variable Helix Finishing
Right Hand Spiral
Right Hand Cut
Features:
• Variable indexed flute-to-flute reduces vibrations, allowing increased feeds and speeds.
• Eccentric-radial O.D. relieved for increased tool strength, allowing greater feeds
and speeds .
• Standard with AlTiN coating for heavy fast metal removal rates.
• Can be used dry.
• Shank O.D. coolant groove in each flute to maximize cooling & chip evacuation velocity.
Four Flute
Four Flute, Ball Nose
Regular Length
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OAL
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
3/8
7/16
5/8
13/16
7/8
1
1
1-1/4
1-1/2
1-1/2
1-1/2
2
2-1/2
2-1/2
2-1/2
2-3/4
3
3-1/2
4
4
1 per tube
MILL
DIA.
Stub Length
Expanded
STOCK #
Regular Length
NEW!
STOCK #
AlTiN COATED
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OAL
HPSC60605AL
HPSC60609AL
HPSC60613AL
HPSC60617AL
HPSC60621AL
HPSC60625AL
HPSC60629AL
HPSC60631AL
HPSC60633AL
HPSC60635AL
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
3/8
7/16
5/8
13/16
7/8
1
1
1-1/4
1-1/2
1-1/2
1-1/2
2
2-1/2
2-1/2
2-1/2
2-3/4
3
3-1/2
4
4
1 per tube
NEW!
STOCK #
AlTiN COATED
HPSCB60671AL
HPSCB60672AL
HPSCB60673AL
HPSCB60674AL
HPSCB60675AL
HPSCB60676AL
HPSCB60677AL
HPSCB60678AL
HPSCB60679AL
HPSCB60680AL
C-19
Micrograin Solid Carbide Roughing End Mills
Right Hand Helix
Right Hand Cut
Features: • Provides excellent roughing with reduced heat in the cut for hard material.
• Form relieved on high strength carbide for excellent profile milling.
• Suitable for profiling, plunging, and ramping roughing operations in all types
of hard material .
• Fine profile.
• Small corner radius for strength.
COARSE PITCH
FINE PITCH
Solid Carbide Roughing End Mills
Four Flute,
Coarse Pitch
C
Multi-Flute,
Fine Pitch
Regular Length
CUTTER SHANK LENGTH
DIA.
DIA.
OF CUT
OAL
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
2-1/2
2-1/2
2-1/2
3
3
3-1/2
4
4
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
Regular Length
NEW!
STOCK #
UNCOATED
SCREM50801
SCREM50802
SCREM50803
SCREM50803A
SCREM50804
SCREM50806
SCREM50811
SCREM50818
NEW!
STOCK #
CUTTER SHANK LENGTH
NO. OF
OAL
DIA.
DIA. OF CUT
FLUTES UNCOATED
AlTiN COATED
SCREM50801AL
SCREM50802AL
SCREM50803AL
SCREM50803AAL
SCREM50804AL
SCREM50806AL
SCREM50811AL
SCREM50818AL
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
3/4
3/4
7/8
1
1-1/4
1-1/2
1-1/2
2-1/2
2-1/2
2-1/2
3
3-1/2
4
4
3
3
3
4
4
4
6
SCREM60901
SCREM60902
SCREM60903
SCREM60904
SCREM60906
SCREM60911
SCREM60918
AlTiN COATED
SCREM60901AL
SCREM60902AL
SCREM60903AL
SCREM60904AL
SCREM60906AL
SCREM60911AL
SCREM60918AL
1 per tube
Long Length
1/4
3/8
1/2
5/8
3/4
1
1/4
3/8
1/2
5/8
3/4
1
1-1/8
1-1/4
2
2-1/4
2-1/4
2-1/4
3
3
4
5
5
5
SCREM50829
SCREM50830
SCREM50831
SCREM50832
SCREM50833
SCREM50841
SCREM50829AL
SCREM50830AL
SCREM50831AL
SCREM50832AL
SCREM50833AL
SCREM50841AL
1 per tube
SOLID CARBIDE ROUGHERS – SPEEDS & FEEDS
SFM
UNCOATED
SFM
ALTIN COATED
1/4" – 1/2"
1/2" – 1"
LOW AND PLAIN CARBON, ALLOY & TOOL STEELS
< 19
258 - 345
430 - 575
.0015 - .003
.003 - .0045
20 - 30
210 - 258
350 - 430
.0015 - .003
.003 - .0045
31 - 40
126 - 192
210 - 320
.0011 - .0021
.0021 - .0032
AUESTENITIC STAINLESS STEELS, 200 & 300 SERIES 135-275
< 28
150 - 300
250 - 500
.0010 - .0025
.0025 - .0040
FERRITIC, MARTENSITIC 400, 500 & PH STAINLESS STEELS
< 35
135 - 258
225 - 430
.0015 - .0030
.0030 - .0045
32 - 43
75 - 129
125 - 215
.0009 - .0018
.0018 - .0027
NICKEL-BASED HIGH TEMPERATURE ALLOYS
< 32
39 - 87
65 - 145
.0009 - .0018
.0018 - .0027
NICKEL-BASED HIGH TEMPERATURE ALLOYS
32 - 50
33 - 66
55 - 110
.0009 - .0018
.0018 - .0027
COBALT-BASED HIGH TEMPERATURE ALLOYS
< 45
27 - 45
45 - 75
.0009 - .0018
.0018 - .0027
TITANIUM ALLOYS
C-20
CHIP LOAD PER TOOTH
HARDNESS
HRc
MATERIAL
HSS End Mills
Weldon Shank
Right Hand Cut
Center Cutting
Center Cutting
• Used for general purpose milling operations
including profiling, slotting, keyways, pockets and
plunge cutting .
• Used for general purpose milling including profiling,
slotting, keyways, pockets and plunge cutting .
• Provides an alternative length of cut for deep milling
and profiling applications .
Regular Length
Long Length
STOCK #
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
11/16
11/16
3/4
3/4
3/4
13/16
7/8
7/8
7/8
15/16
1
1
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-5/8
1-3/4
1-3/4
1-7/8
2
2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
1/2
5/8
1/2
5/8
3/4
3/4
5/8
3/4
7/8
3/4
3/4
1
3/4
1
3/4
1
1-1/4
3/4
1
3/4
1
1-1/4
1-1/4
3/4
1-1/4
1-1/4
3/4
1-1/4
3/8
7/16
1/2
9/16
9/16
13/16
13/16
1
1-1/8
1-1/8
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-5/8
1-1/2
1-5/8
1-1/2
1-5/8
1-5/8
1-1/2
1-5/8
1-1/2
1-5/8
1-5/8
1-5/8
1-1/2
1-5/8
1-5/8
1-1/2
1-5/8
2-5/16
2-5/16
2-5/16
2-5/16
2-5/16
2-1/2
2-1/2
3
3-1/8
3-1/8
3-7/16
3-5/16
3-7/16
3-5/16
3-7/16
3-9/16
3-3/4
3-5/8
3-3/4
3-3/4
3-3/4
3-3/4
4-1/8
3-7/8
4-1/8
3-7/8
4-1/8
4-1/8
3-7/8
4-1/8
3-7/8
4-1/8
4-1/8
4-1/8
3-7/8
4-1/8
4-1/8
3-7/8
4-1/8
SE151301
SE151302
SE151303
SE151304
SE151305
SE151306
SE151307
SE151308
SE151309
SE151310
SE151311
SE151312
SE151313
SE151314
SE151315
SE151316
SE151317
SE151318
SE151319
SE151320
SE151321
SE151324
SE151325
SE151326
SE151327
SE151328
SE151329
SE151330
SE151331
SE151332
SE151334
SE151335
SE151336
SE151338
SE151339
SE151340
SE151341
SE151342
SE151344
1 per tube
All end mills available TiN, TiCN, AlTiN
and TiAIN coated. Details on request.
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
ALFA USA
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
3/8
1/2
5/8
3/4
7/8
1
1
1
1-1/4
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
2
2
2-1/4
2-1/2
3
3
3
3
3
3
3
3
3
3
3-1/4
4
4-1/8
4-1/2
4-3/4
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
SEL151351
SEL151352
SEL151353
SEL151354
SEL151355
SEL151356
SEL151357
SEL151358
SEL151359
SEL151360
SEL151361
SEL151362
SEL151363
SEL151364
SEL151365
HSS End Mills
MILL
DIA.
1 per tube
C
• Used for all general purpose radius and slot milling,
die sinking and profile milling .
• Also designed to plunge cut .
Regular Length
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
5/8
3/4
3/4
7/8
1
1-1/8
1-1/4
1-1/2
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
1/2
3/4
7/8
1
1
1-1/4
1-1/4
3/8
1/2
5/8
3/4
3/4
1
1
1
1-3/8
1-3/8
1-5/8
1-5/8
2
2-1/4
2-1/4
2-1/2
2-1/2
2-5/16
2-3/8
2-7/16
2-1/2
2-1/2
3
3
3-1/16
3-3/8
3-1/2
3-5/8
3-7/8
4-1/4
4-3/4
4-3/4
5
5
SEB151371
SEB151372
SEB151373
SEB151374
SEB151375
SEB151376
SEB151377
SEB151378
SEB151379
SEB151380
SEB151381
SEB151382
SEB151383
SEB151384
SEB151385
SEB151386
SEB151387
1 per tube
C-21
HSS End Mills
Weldon Shank
Right Hand Cut
Center Cutting
• Used for general purpose milling operations including
profiling, slotting, keyways, pockets and plunge cutting .
• Used for contour or pocket milling where the ball end
is required to produce a radius in the work piece .
• Can be used for general purpose milling including slots,
keyways, pockets and plunge cutting .
HSS End Mills
Regular Length
C
Regular Length
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
ALFA USA
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1
1
3/8
7/16
7/16
1/2
1/2
9/16
9/16
9/16
9/16
13/16
13/16
13/16
13/16
1-1/8
1-1/8
1-5/16
1-5/16
1-9/16
1-9/16
1-5/8
1-5/8
3-1/16
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-3/4
3-3/4
3-3/4
3-3/4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
5-7/8
5-7/8
DE150731
DE150732
DE150733
DE150734
DE150735
DE150736
DE150737
DE150738
DE150739
DE150740
DE150741
DE150742
DE150743
DE150744
DE150745
DE150746
DE150747
DE150748
DE150749
DE150750
DE150751
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
3/8
3/8
3/8
3/8
3/8
1/2
1/2
5/8
3/4
7/8
1
3/8
7/16
1/2
9/16
9/16
13/16
13/16
1-1/8
1-5/16
1-9/16
1-5/8
3-1/16
3-1/8
3-1/8
3-1/8
3-1/8
3-3/4
3-3/4
4-1/2
5
5-1/2
5-7/8
DEB150761
DEB150762
DEB150763
DEB150764
DEB150765
DEB150766
DEB150767
DEB150768
DEB150769
DEB150770
DEB150771
1 per tube
1 per tube
C-22
STOCK #
MILL
DIA.
HSS End Mills
Weldon Shank
Right Hand Cut
Multi-Flute, Single End,
Center Cutting
• Used for general purpose milling operations including
profiling, slotting, keyways, pockets and plunge cutting .
• Used for all general purpose radius and slot milling,
die sinking and profile milling . Also designed to plunge cut .
Regular Length
Regular Length
STOCK #
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-3/4
2
3/8
3/8
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
3/8
1/2
5/8
3/4
3/4
1-1/4
1-5/8
1-5/8
1-7/8
2
2
2
2
2
2
3
2
2
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
4
6
6
2-5/16
2-3/8
2-7/16
2-1/2
2-1/2
3-1/4
3-3/4
3-7/8
4-1/8
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
5-1/2
4-1/2
4-1/2
SECC151031
SECC151032
SECC151033
SECC151034
SECC151035
SECC151036
SECC151037
SECC151038
SECC151039
SECC151040
SECC151042
SECC151043
SECC151044
SECC151047
SECC151048
SECC151049
SECC151051
SECC151052
Long Length
NEW!
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
ALFA USA
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/4
1-1/2
1-1/2
2
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-3/8
1-1/2
2
2-1/2
3
3-1/2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
6
3-1/16
3-1/8
3-1/4
4
4-5/8
5-1/4
5-3/4
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
SECCL151033
SECCL151034
SECCL151035
SECCL151036
SECCL151037
SECCL151038
SECCL151039
SECCL151041
SECCL151043
SECCL151044
SECCL151045
SECCL151046
SECCL151054
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1
1-1/4"
1-3/4
2
2-1/2
3
4
4
5
6
6
4
4
4
4
4
4
4
4
6
3-9/16
3-3/4
4-1/4
5
6-1/8
6-1/4
7-1/4
8-1/2
8-1/2
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
1/4
5/16
3/8
1/2
5/8
3/4
1
3/8
3/8
3/8
1/2
5/8
3/4
1
3/4
1
1
1-1/2
1-3/4
1-1/2
2
4
4
4
4
4
4
4
2-9/16
2-3/4
2-3/4
3-1/2
3-7/8
3-3/4
4-1/2
STOCK #
ALFA USA
SEB150730
SEB150730A
SEB150731
SEB150732
SEB150733
SEB150734
SEB150735
Long Length
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
1/4
5/16
3/8
1/2
5/8
3/4
1
3/8
3/8
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-1/2
2
2-1/2
2-1/4
3
4
4
4
4
4
4
4
3-1/16
3-1/4
3-1/4
4
4-5/8
4-1/2
5-1/2
NEW!
STOCK #
ALFA USA
SEBL150730
SEBL150730A
SEBL150731
SEBL150732
SEBL150733
SEBL150734
SEBL150735
X-Long Length
STOCK #
MILL
DIA.
X-Long Length
MILL
DIA.
1/4
3/8
1/2
5/8
3/4
1
3/8
3/8
1/2
5/8
3/4
1
1-1/2
2-1/2
3
3
3-3/4
4
4
4
4
4
4
4
3-5/16
4-5/16
5
5-1/8
6
6-1/2
HSS End Mills
MILL
DIA.
C
NEW!
SEBXL150730
SEBXL150731
SEBXL150732
SEBXL150733
SEBXL150734
SEBXL150735
1 per tube
NEW!
SECCXL151033
SECCXL151034
SECCXL151035
SECCXL151036
SECCXL151037
SECCXL151038
SECCXL151039
SECCXL151041
SECCXL151044
1 per tube
C-23
HSS End Mills
Weldon Shank
Right Hand Cut
Non-Center Cutting
• Provides an alternative length of cut for deep milling
and profiling applications .
Non-Center Cutting
• Used for general purpose milling including profile milling
and producing open-ended slots or pockets where a
plunge feed-in is not required .
HSS End Mills
Regular Length
C
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
11/16
11/16
3/4
3/4
3/4
13/16
7/8
7/8
7/8
15/16
1
1
1
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-1/2
1-5/8
1-3/4
1-3/4
1-3/4
1-7/8
2
2
2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
1/2
5/8
1/2
5/8
3/4
3/4
5/8
3/4
7/8
3/4
5/8
3/4
1
3/4
1
3/4
1
1-1/4
1-1/4
3/4
1
3/4
1
1-1/4
1-1/4
1-1/4
3/4
1-1/4
1-1/4
1-1/4
3/4
1-1/4
1-1/4
3/8
1/2
5/8
3/4
3/4
1
1
1-1/4
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
2
1-1/2
2
1-1/2
2
2
2
1-1/2
2
1-1/2
2
2
2
2
1-1/2
2
2
2
1-1/2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
4
4
6
4
4
6
6
6
6
4
6
6
6
6
6
4
6
6
6
4
6
6
8
4
6
2-5/16
2-3/8
2-7/16
2-1/2
2-1/2
2-11/16
2-11/16
3-1/4
3-3/8
3-3/8
3-3/4
3-5/8
3-3/4
3-5/8
3-3/4
3-7/8
4-1/8
4
4-1/8
4-1/8
4-1/8
4
4-1/8
4-1/2
3-7/8
4-1/2
3-7/8
4-1/2
4-1/2
4-1/2
3-7/8
4-1/2
3-7/8
4-1/2
4-1/2
4-1/2
4-1/2
3-7/8
4-1/2
4-1/2
4-1/2
3-7/8
4-1/2
4-1/2
SE150651
SE150652
SE150653
SE150654
SE150655
SE150656
SE150657
SE150658
SE150659
SE150660
SE150661
SE150662
SE150663
SE150664
SE150665
SE150666
SE150667
SE150668
SE150669
SE150670
SE150671
SE150673
SE150674
SE150675
SE150676
SE150677
SE150678
SE150679
SE150680
SE150681
SE150682
SE150683
SE150684
SE150685
SE150686
SE150687
SE150689
SE150690
SE150691
SE150692
SE150693
SE150694
SE150695
SE150696
1 per tube
C-24
Long Length
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
ALFA USA
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
2
3/8
3/8
3/8
1/2
1/2
5/8
3/4
7/8
1
1
1
1-1/4
1-1/4
1
1-1/4
1-1/4
1-1/4
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
4
6
6
6
6
6
3-1/16
3-1/8
3-1/4
3-3/4
4
4-5/8
5-1/4
5-3/4
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
SEL150701
SEL150702
SEL150703
SEL150704
SEL150705
SEL150706
SEL150707
SEL150708
SEL150709
SEL150710
SEL150711
SEL150712
SEL150713
SEL150715
SEL150716
SEL150717
SEL150718
1 per tube
Multi-Flute, Double End,
Non-Center Cutting
Regular Length
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
ALFA USA
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1
1
3/8
7/16
1/2
9/16
5/8
11/16
3/4
3/4
3/4
1
1
1
1
1-3/8
1-3/8
1-5/8
1-5/8
1-7/8
1-7/8
1-7/8
1-7/8
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3-1/16
3-1/8
3-1/4
3-1/4
3-3/8
3-3/8
3-1/2
3-1/2
3-1/2
4-1/8
4-1/8
4-1/8
4-1/8
5
5
5-5/8
5-5/8
6-1/8
6-1/8
6-3/8
6-3/8
DE151401
DE151402
DE151403
DE151404
DE151405
DE151406
DE151407
DE151408
DE151409
DE151410
DE151411
DE151412
DE151413
DE151414
DE151415
DE151416
DE151417
DE151418
DE151419
DE151420
DE151421
1 per tube
HSS End Mills – Miniature
Right Hand Cut
Center Cutting
Regular End
Regular Length
Regular Length
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
STOCK #
1/32
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/32
7/32
1/4
5/16
11/32
3/8
13/32
7/16
15/32
1/2
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
DE50753
DE50754
DE50755
DE50756
DE50757
DE50758
DE50759
DE50760
DE50761
DE50762
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
STOCK #
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
5/16
5/16
5/16
5/16
3/8
3/8
7/16
7/16
1/2
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
DE51423
DE51424
DE51425
DE51426
DE51427
DE51428
DE51429
DE51430
DE51431
1 per pack
1 per pack
Features: • For cutting and finishing in
hard-to-reach applications .
Long Length
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
7/32
1/4
9/32
9/32
3/4
3/4
7/8
7/8
1
2-1/2
2-1/2
2-5/8
2-5/8
3-1/8
3-1/8
3-1/4
3-1/4
3-3/8
Long Length
DE50754L
DE50755L
DE50756L
DE50757L
DE50758L
DE50759L
DE50760L
DE50761L
DE50762L
1 per pack
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
9/32
9/32
3/4
3/4
7/8
7/8
1
2-5/8
2-5/8
2-5/8
3-1/8
3-1/8
3-1/4
3-1/4
3-3/8
DE51424L
DE51425L
DE51426L
DE51427L
DE51428L
DE51429L
DE51430L
DE51431L
HSS End Mills - Miniature
MILL
DIA.
C
1 per pack
Features: • Most cost-effective option for shallow milling .
• Shorter length improves rigidity of tool .
Stub Length
1/32
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
1 per pack
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/64
3/32
1/8
9/64
5/32
3/16
7/32
15/64
1/4
9/32
2
2
2
2
2
2
2
2
2
2
Stub Length
DE50753S
DE50754S
DE50755S
DE50756S
DE50757S
DE50758S
DE50759S
DE50760S
DE50761S
DE50762S
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/32
1/8
9/64
5/32
3/16
7/32
15/64
1/4
9/32
2
2
2
2
2
2
2
2
2
DE51423S
DE51424S
DE51425S
DE51426S
DE51427S
DE51428S
DE51429S
DE51430S
DE51431S
1 per pack
C-25
Cobalt M42 End Mills
Weldon Shank
Right Hand Cut
Features: • Designed for tougher cutting assignments on high-strength,
high-temp steels and exotic materials or for extended production
runs in conventional and non-conventional milling operations .
• Used for general purpose milling including profiling, slotting,
Center Cutting
Center Cutting
Regular Length
C
Regular Length
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1
1
1-1/4
1-1/2
2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
1/2
5/8
3/4
5/8
7/8
5/8
3/4
1
1-1/4
1-1/4
1-1/4
3/8
7/16
1/2
9/16
9/16
13/16
13/16
1
1-1/8
1-1/8
1-5/16
1-5/16
1-5/16
1-5/16
1-1/2
1-1/2
1-1/2
1-1/2
1-5/8
1-5/8
1-5/8
1-5/8
2-5/16
2-5/16
2-5/16
2-5/16
2-5/16
2-1/2
2-1/2
3
3-1/8
3-1/8
3-7/16
3-5/16
3-7/16
3-9/16
3-5/8
3-3/4
3-5/8
3-3/4
4-1/8
4-1/8
4-1/8
4-1/8
CO51301
CO51302
CO51303
CO51304
CO51305
CO51306
CO51307
CO51308
CO51309
CO51310
CO51311
CO51314
CO51315
CO51316
CO51318
CO51320
CO51323
CO51324
CO51325
CO51330
CO51336
CO51343
SHANK
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
ALFA USA
1/8
5/32
3/16
7/32
1/4
9/32
5/16
3/8
13/32
7/16
1/2
9/16
5/8
3/4
7/8
1
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
7/8
1
3/8
7/16
7/16
1/2
1/2
9/16
9/16
9/16
13/16
13/16
13/16
1-1/8
1-1/8
1-5/16
1-9/16
1-5/8
3-1/16
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-3/4
3-3/4
3-3/4
4-1/2
4-1/2
5
5-1/2
5-7/8
CO50731
CO50732
CO50733
CO50734
CO50735
CO50736
CO50737
CO50739
CO50740
CO50741
CO50743
CO50744
CO50745
CO50747
CO50749
CO50751
1 per tube
1 per tube
C-26
STOCK #
MILL
DIA.
Cobalt M42 End Mills - Cont.
Weldon Shank
Right Hand Cut
Features: • Designed for tougher cutting assignments on high-strength,
high-temp steels and exotic materials or for extended production
runs in conventional and non-conventional milling operations .
• Used for general purpose milling including profiling, slotting,
Center Cutting
Multi-Flute, Double End,
Center Cutting
Regular Length
Regular Length
STOCK #
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/4
1-1/2
1-1/2
2
3/8
3/8
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
3/8
1/2
5/8
3/4
3/4
1-1/4
1-5/8
1-5/8
1-7/8
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
6
4
6
6
2-5/16
2-3/8
2-7/16
2-1/2
2-1/2
3-1/4
3-3/4
3-7/8
4-1/8
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
CO50651
CO50652
CO50653
CO50654
CO50655
CO50658
CO50661
CO50666
CO50667
CO50675
CO50680
CO50681
CO50686
CO50687
CO50688
STOCK #
MILL
DIA.
SHANK
DIA.
FLUTE
LENGTH
NO.
FLTS
OVERALL
LENGTH
ALFA USA
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
3/8
3/8
3/8
3/8
3/8
1/2
5/8
3/4
3/8
1/2
5/8
3/4
3/4
1
1-3/8
1-5/8
4
4
4
4
4
4
4
4
3-1/16
3-1/4
3-3/8
3-1/2
3-1/2
4-1/8
5
5-5/8
CO51401
CO51403
CO51405
CO51407
CO51409
CO51413
CO51415
CO51417
1 per tube
C
Long Length
3/8
1/2
5/8
3/4
1
1-1/4
1-1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/4
1-1/2
2
2-1/2
3
4
4
4
4
4
4
4
4
4
6
3-1/4
4
4-5/8
5-1/4
6-1/2
6-1/2
6-1/2
MILL
DIA.
CO50655L
CO50658L
CO50661L
CO50666L
CO50675L
CO50680L
CO50681L
1 per tube
TOOLS NOT INCLUDED
END MILL DISPENSER
(Three Drawers)
Dimensions: 26" W x 12" D x 9-5/16" H
DIH13300
DIH13325
(Lockable)
DESCRIPTION
WEIGHT
STOCK #
FOR TWO FLUTE END MILLS
Holds sizes 1/16" to 1"
Lockable, stackable
37 lbs .
DIH13300
37 lbs .
DIH13325
FOR FOUR FLUTE END MILLS
Holds sizes 1/16" to 1"
Lockable, stackable
C-27
Cobalt M42 Roughing End Mills
Right Hand Cut
Sinusoidal Tooth Form
Features: • A sinusoidal chipbreaker form, which produces small chips, allowing them to
run at faster feed rates than conventional tools, resulting in high material removal rates .
• Designed to machine difficult and abrasive materials ranging from medium to the
highest hardness levels machinable by high-speed steel .
• 8% cobalt content assures high edge hardness at elevated temperatures.
• Large core diameter provides rigidity and reduces deflection.
• Can be used for general purpose rough milling including profiling and open ended slots.
COARSE PITCH
Cobalt M42 Roughing End Mills
Multi-Flute,
Coarse Pitch,
Non-Center Cutting
C
Round
Profile
Regular Length
SHANK
DIA.
LENGTH
OF CUT
OAL
NO. OF
FLUTES
STOCK #
1/4
5/16
3/8
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
2
2
3/8
3/8
3/8
5/8
3/4
3/4
1
1
1-1/4
1-1/4
1-1/4
2
5/8
3/4
3/4
1-5/8
1-5/8
1-7/8
2
2
2
2
2
4
2-7/16
2-1/2
2-1/2
3-3/4
3-7/8
4-1/8
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
7-3/4
3
3
4
4
4
5
5
6
6
6
8
8
REM50801
REM50802
REM50803
REM50806
REM50811
REM50813
REM50818
REM50819
REM50822
REM50823
REM50825
REM50828
Medium & Long Length
1/2
5/8
3/4
3/4
1
1-1/4
1-1/4
1-1/4
2
2
2
2
2-1/2
3
3-1/2
4
4
4
4
8
10
12
4
4-5/8
5-1/4
5-3/4
6-1/2
6-1/2
6-1/2
6-1/2
11-3/4
13-3/4
15-3/4
4
4
4
5
5
6
6
8
8
8
8
Round
Profile
Regular, Medium & Long Length
CUTTER
DIA.
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
2
2
2
Multi-Flute, Ball Nose,
Coarse Pitch,
Center Cutting
REM50831
REM50832
REM50833
REM50834
REM50841
REM50842
REM50843
REM50845
REM50846
REM50847
REM50848
CUTTER
DIA.
SHANK
DIA.
LENGTH
OF CUT
OAL
NO. OF
FLUTES
STOCK #
1/2
1/2
5/8
5/8
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1/2
1/2
5/8
5/8
3/4
3/4
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
2
1-5/8
2-1/2
1-5/8
3
2
4
2
4
2
4
3-1/4
4
3-3/4
4-5/8
3-7/8
5-1/4
4-1/2
6-1/2
4-1/2
6-1/2
4-1/2
6-1/2
4
4
4
4
4
4
5
5
6
6
6
6
REM50881
REM50882
REM50883
REM50884
REM50885
REM50886
REM50888
REM50889
REM50890
REM50891
REM50892
REM50893
1 per pack
Multi-Flute, Shell Type,
Right Hand Cut,
Non-Center
Cutting
1 per pack
Multi-Flute, For Bridgeport,
Coarse Pitch
C-28
CUTTER
DIA.
SHANK
DIA.
LENGTH
OF CUT
OAL
NO. OF
FLUTES
STOCK #
1
1
1-1/4
1-1/4
1-1/2
1-1/2
3/4
3/4
3/4
3/4
3/4
3/4
1-7/8
4
2
4
2-1/4
4
4-1/8
6-1/4
4-1/4
6-1/4
4-1/2
6-1/4
5
5
6
6
6
6
REM51134
REM51135
REM51138
REM51139
REM51141
REM51142
1 per pack
CUTTER
DIA.
LENGTH
OF CUT
HOLE
OF CUT
NO. OF
FLUTES
STOCK #
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
2
2
2
2
2
2
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
3/4
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
2
2
8
8
8
8
10
10
12
14
14
16
16
REM50853
REM50857
REM50861
REM50865
REM50869
REM50871
REM50872
REM50873
REM50874
REM50875
REM50876
1 per pack
HSS Cutters
Straight Teeth with
1/2" Dia. Shank
• Suitable for cutting smaller
woodruff keysets .
WOODRUFF KEYSEAT CUTTERS
OLD
AMERICAN NOMINAL FACE
STANDARD STANDARD
DIA.
WIDTH
204
304
305
404
405
406
505
605
506
806
507
606
607
707
608
708
1208
609
1/2
1/2
5/8
1/2
5/8
3/4
5/8
5/8
3/4
3/4
7/8
3/4
7/8
7/8
1
1
1
1-1/8
1/16
3/32
3/32
1/8
1/8
1/8
5/32
3/16
5/32
1/4
5/32
3/16
3/16
7/32
3/16
7/32
3/8
3/16
STOCK #
2-1/16
2-3/32
2-3/32
2-1/8
2-1/8
2-1/8
2-5/32
2-3/16
2-5/32
2-1/4
2-5/32
2-3/16
2-3/16
2-7/32
2-3/16
2-7/32
2-3/8
2-3/16
WKC51761
WKC51762
WKC51763
WKC51764
WKC51765
WKC51766
WKC51767
WKC51768
WKC51769
WKC51770
WKC51771
WKC51772
WKC51773
WKC51774
WKC51775
WKC51776
WKC51777
WKC51778
CORNER ROUNDING CUTTERS
• Suitable for milling convex
quarter circles on the edge
of all types of materials .
OLD
AMERICAN NOMINAL FACE
STANDARD STANDARD
DIA.
WIDTH
A
15
17
18
19
20
21
22
24
B
C
D
23
25
E
F
G
807
808
709
809
610
710
810
811
812
1008
1009
1010
1011
1012
1210
1211
1212
1/4
1/4
7/32
1/4
3/16
7/32
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
7/8
1
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-3/8
1-1/2
1
1-1/8
1-1/4
1-3/8
1-1/2
1-1/4
1-3/8
1-1/2
OAL
STOCK #
2-1/4
2-1/4
2-7/32
2-1/4
2-3/16
2-7/32
2-1/4
2-1/4
2-1/4
2-5/16
2-5/16
2-5/16
2-5/16
2-5/16
2-3/8
2-3/8
2-3/8
WKC51779
WKC51780
WKC51781
WKC51782
WKC51783
WKC51784
WKC51785
WKC51786
WKC51787
WKC51788
WKC51789
WKC51790
WKC51791
WKC51792
WKC51793
WKC51794
WKC51795
1 per pack
RADIUS
SHANK
DIA.
HEAD
DIA.
OAL
STOCK #
1/16"
3/32"
1/8"
5/32"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
7/16"
1/2"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3"
3-1/4"
3-1/2"
3-3/4"
3-7/8"
CREM51702
CREM51703
CREM51704
CREM51705
CREM51706
CREM51708
CREM51711
CREM51714
CREM51716
CREM51717
HSS Cutters
1
2
3
4
5
7
6
61
8
91
10
9
11
12
13
14
152
16
OAL
C
1 per pack
DOVETAIL CUTTERS
ANGLE
• Suitable for dovetail milling
in all types of materials .
60O
45O
60O
45O
60O
45O
60O
45O
60O
45O
CUTTER
DIA.
WIDTH
SHANK
DIA.
OAL
STOCK #
1/2"
1/2"
3/4"
3/4"
1-3/8"
1-3/8"
1-7/8"
1-7/8"
2-1/4"
2-1/4"
1/4"
5/32"
5/16"
1/4"
9/16"
7/16"
13/16"
5/8"
1-1/16"
5/8"
3/8"
3/8"
3/8"
3/8"
5/8"
5/8"
7/8"
7/8"
1"
1"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-7/8"
2-7/8"
3-1/4"
3-1/4"
3-3/4"
3-3/4"
DTC51731
DTC51732
DTC51733
DTC51734
DTC51735
DTC51736
DTC51737
DTC51738
DTC51739
DTC51740
1 per pack
C-29
Tool Bits
High-Speed Steel
Cobalt Steel • Ground
Features:
Tool Bits
• Designed for long lasting accurate performance and machining accuracy .
• Precisely controlled heat treatment process gives uniform hardness throughout.
• These cost effective tools offer high resistance to abrasion and even shock
associated with interrupted cuts .
C
HIGH-SPEED STEEL
SQUARE TOOL BITS
BOTH ENDS BEVELED
COBALT STEEL M-35
SQUARE TOOL BITS
BOTH ENDS BEVELED
Features:
Features:
• Useable for general purpose applications.
• Unique tungsten-molybdenum high-speed steel tool bit
provides excellent strength and toughness .
• Ideally suited for a wide variety of applications in ferrous
and non-ferrous alloys .
• Useable for the toughest applications.
• Manufactured from premium cobalt M-35 high-speed steel,
these tools are designed to provide the best wear resistance on
difficult-to-machine alloys and heat treated, high-strength steels .
• For production applications where higher speeds for feeds are
desired with mild materials .
SIZE
A
OVERALL
LENGTH
L
STOCK #
3/16
1/4
1/4
5/16
3/8
7/16
1/2
1/2
5/8
3/4
7/8
1
2-1/2
2-1/2
4
2-1/2
3
3-1/2
4
6
4-1/2
5
6
7
3/16" to 1/2", 5 per pack,
5/8" and above, 1 per pack
C-30
OVERALL
LENGTH
L
STOCK #
HSS
SIZE
A
TBHS60803
TBHS60805
TBHS60806
TBHS60807
TBHS60809
TBHS60811
TBHS60813
TBHS60814
TBHS60815
TBHS60817
TBHS60819
TBHS60821
3/16
1/4
1/4
5/16
3/8
7/16
1/2
1/2
5/8
3/4
7/8
1
2-1/2
2-1/2
4
2-1/2
3
3-1/2
4
6
4-1/2
5
6
7
TBCS60803
TBCS60805
TBCS60806
TBCS60807
TBCS60809
TBCS60811
TBCS60813
TBCS60814
TBCS60815
TBCS60817
TBCS60819
TBCS60821
3/16" to 1/2", 5 per pack,
5/8" and above, 1 per pack
COBALT
Carbide Tipped Tool Bits
Grade C2 for Cast Iron &
Non-Ferrous Metals Grade C5 for Steel
STYLE “AR & AL”
STYLE “BR & BL”
Straight Turning Tool
Lead angle Turning Tool
RIGHT HAND
SIZE
ANSI
SQ x LENGTH
#
1/4" x 2"
5/16" x 2-1/4"
3/8" x 2-1/2"
7/16" x 3"
1/2" x 3-1/2"
5/8" x 4"
3/4" x 4-1/2"
AR4
AR5
AR6
AR7
AR8
AR10
AR12
LEFT HAND
STOCK #
C2
C5
ANSI
#
TBAR4C2
TBAR5C2
TBAR6C2
TBAR7C2
TBAR8C2
TBAR10C2
TBAR12C2
TBAR4C5
TBAR5C5
TBAR6C5
TBAR7C5
TBAR8C5
TBAR10C5
TBAR12C5
AL4
AL5
AL6
AL7
AL8
AL10
AL12
RIGHT HAND
C2
C5
ANSI
#
TBAL4C2
TBAL5C2
TBAL6C2
TBAL7C2
TBAL8C2
TBAL10C2
TBAL12C2
TBAL4C5
TBAL5C5
TBAL6C5
TBAL7C5
TBAL8C5
TBAL10C5
TBAL12C5
BR4
BR5
BR6
BR7
BR8
BR10
BR12
STOCK #
LEFT HAND
STOCK #
C2
C5
TBBR4C2
TBBR5C2
TBBR6C2
TBBR7C2
TBBR8C2
TBBR10C2
TBBR12C2
TBBR4C5
TBBR5C5
TBBR6C5
TBBR7C5
TBBR8C5
TBBR10C5
TBBR12C5
ANSI
#
BL4
BL5
BL6
BL7
BL8
BL10
BL12
STOCK #
C2
C5
TBBL4C2
TBBL5C2
TBBL6C2
TBBL7C2
TBBL8C2
TBBL10C2
TBBL12C2
TBBL4C5
TBBL5C5
TBBL6C5
TBBL7C5
TBBL8C5
TBBL10C5
TBBL12C5
1/4" to 3/8", 10 per pack, 7/16" to 3/4", 5 per pack
STYLE “C”
SQUARE NOSE TOOL
STOCK #
STYLE “E”
60O THREADING TOOL
STOCK #
SIZE
SQ x LENGTH
ANSI
#
C2
C5
ANSI
#
C2
1/4" x 2"
5/16" x 2-1/4"
3/8" x 2-1/2"
7/16" x 3"
1/2" x 3-1/2"
5/8" x 4"
3/4" x 4-1/2"
D4
D5
D6
D7
D8
D10
D12
TBD4C2
TBD5C2
TBD6C2
TBD7C2
TBD8C2
TBD10C2
TBD12C2
TBD4C5
TBD5C5
TBD6C5
TBD7C5
TBD8C5
TBD10C5
TBD12C5
C4
C5
C6
C7
C8
C10
C12
TBC4C2
TBC5C2
TBC6C2
TBC7C2
TBC8C2
TBC10C2
TBC12C2
C5
TBC4C5
TBC5C5
TBC6C5
TBC7C5
TBC8C5
TBC10C5
TBC12C5
Carbide Tipped Tool Bits
STYLE “D”
80O POINTED NOSE TOOL
STOCK #
ANSI
#
C2
E4
E5
E6
E7
E8
E10
E12
TBE4C2
TBE5C2
TBE6C2
TBE7C2
TBE8C2
TBE10C2
TBE12C2
C5
TBE4C5
TBE5C5
TBE6C5
TBE7C5
TBE8C5
TBE10C5
TBE12C5
1/4" to 3/8", 10 per pack, 7/16" to 3/4", 5 per pack
C
STYLE “FR & FL”
END CUTTING
OFFSET TOOL
STYLE “GR & GL”
SIDE CUTTING
OFFSET TOOL
RIGHT HAND
SIZE
ANSI
SQ x LENGTH
#
C2
1/2" x 3-1/2" FR8 TBFR8C2
5/8" x 4"
FR10 TBFR10C2
3/4" x 4-1/2"
–
–
RIGHT HAND
LEFT HAND
STOCK #
STOCK #
ANSI
#
C5
TBFR8C5
TBFR10C5
–
FL8
FL10
–
C2
ANSI
#
C5
TBFL8C2
TBFL10C2
–
TBFL8C5
TBFL10C5
–
GR8
GR10
GR12
LEFT HAND
STOCK #
C2
TBGR8C2
TBGR10C2
TBGR12C2
C5
ANSI
#
STOCK #
C2
C5
TBGR8C5 GL8 TBGL8C2 TBGL8C5
TBGR10C5 GL10 TBGL10C2 TBGL10C5
TBGR12C5 GL12
–
TBGL12C5
1/2" to 3/4", 4/5 per pack
STYLE “CTR & CTL”
CUT-OFF TOOL
RIGHT HAND
STOCK #
SIZE
SQ x H x LENGTH
ANSI #
TIP
WIDTH
C2
C5
1/2" x 1" x 5"
CTR11
CTR22
CTR33
1/8"
3/16"
1/4"
TBCTR11C2
TBCTR22C2
TBCTR33C2
TBCTR11C5
TBCTR22C5
TBCTR33C5
LEFT HAND
1/2" x 1" x 5"
5 per pack
CTL11
CTL22
CTL33
1/8"
3/16"
1/4"
TBCTL11C2
TBCTL22C2
TBCTL33C2
TBCTL11C5
TBCTL22C5
TBCTL33C5
C-31
Indexable Insert Boring Bars
Screw-On Type
Negative 5O End and
Side Cutting Angle
Positive 80O Diamond
CCMT Inserts
Indexable Insert Boring Bars
Individual Boring Bars supplied without inserts .
BORING BAR
STYLE
SHANK
SIZE
MIN.
BORE
LENGTH
L
CENTER
LINE F
INSERTS
STYLE
STOCK #
RH
LH
LOCKING
SCREW
TORX KEY
STOCK #
STOCK #
SCLCR/L 4-2
.315"
.354
4"
.1875
CCMT
BB870042R
BB870042L
SC2504
SCLCR/L 6-2
3/8"
.468
6"
.2500
-21 .51
BB870062R
BB870062L
SC2506
SCLCR/L 8-3
1/2"
.600
7"
.3120
BB870083R
BB870083L
SCLCR/L 10-3
5/8"
.866
8"
.4060
CCMT
BB870103R
BB870103L
SCLCR/L 12-3
3/4"
.920
10"
.5000
-32 .52
BB870123R
BB870123L
SCLCR/L 16-3
1"
1 .120
12"
.6094
BB870163R
BB870163L
SC4008
T7
T8
25 per pack
1 per pack
REPLACEMENT CARBIDE INSERTS
STYLE
COATING
CCMT 21.51
CCMT 32.51
CCMT 32.52
TiAlN
TiAlN
TiAlN
MATERIALS
APPLICATIONS
STOCK #
Milling, Turning,
Drilling, Threading
BBR310
BBR320
BBR330
Turning
BBR410
BBR420
BBR430
STAINLESS STEEL
C
Steels, Stainless,
Cast Irons, HRSA
SHARP EDGE
CCGT 21.51
CCGT 32.51
CCGT 32.52
Uncoated
Uncoated
Uncoated
Aluminum, Fiberglass,
Plastic, Teflon, Brass
10 per pack
INDEXABLE BORING BAR SETS
IN FITTED WOODEN BOX
BB870500
C-32
SET
QTY.
BORING BAR
SIZES
INSERTS
IN SET
ACCESSORIES
STOCK #
11 Pc.
1 each
.315", 3/8", 1/2"
6 Pcs . CCM215L
1 Screw
1 Key
BB870500
13 Pc.
1 each
3/8", 1/2", 5/8"
2 Pcs . CCMT21 .51
4 Pcs . CCMT32 .52
2 Screws
2 Keys
BB870515
11 Pc.
1 each
1/2", 5/8", 3/4"
6 Pcs . CCMT32 .52
1 Screw
1 Key
BB870510
19 Pc.
1 ea . .315", 3/8",
1/2", 5/8", 3/4"
4 Pcs . CCMT21 .51
6 Pcs . CCMT32 .52
2 Screws
2 Keys
BB870505
End Mill Terminology
radial rake angle
(positive)
primary relief angle
(side)
secondary clearance angle
(side)
cutting edge
(side)
primary end
tooth face
end cutting edge
notch or gash
primary relief width
(side)
secondary clearance width
(side)
fishtail or end cutting
edge concavity angle
tooth face
secondary end
clearance angle
primary end
relief angle
width of primary relief
width of secondary clearance
Gash: The secondary cuts on a mill . Provides chip room .
Helical Rake: The angle between the tool axis and a tangent plane
at a given point on the flute face .
overall length
Helix Angle: The cutting edge angle made by a helical cutting
edge with a plane containing the axis of a cylindrical mill .
When viewed from the cutter end of the mill, the flute will move
clockwise for a right hand helix .
Hook: A concave condition of a tooth face . The rake of a hooked
tooth face must be determined at a given point .
Land: Used to define the width of a specified surface.
length of cut
cutting diameter
shank diameter
primary width (end)
primary clearance angle (end)
secondary clearance angle (end)
gash
Center Cutting End View
primary width (end)
primary clearance angle (end)
secondary clearance angle (end)
Non-Center Cutting End View
Flute: The chip space between the back of one tooth and
the face of the following tooth .
end cutting edge
notch or gash
cutting diameter
cutting diameter
Cutting Edge: The leading edge of the cutter tooth .
Heel: The back edge of the relieved land .
length of cut
length of cut
Clearance (Secondary Relief): The additional space provided
behind the relieved land . Eliminates undesirable contact between
the mill and the workpiece .
end cutting edge
rake angle
overall length
shank diameter
Axial Relief: The relief, measured in the axial direction, between
a plane perpendicular to the axis at the cutting edge and the
relieved surface .
Left Hand Cut: When viewed from the cutting end of the mill, a
clockwise rotation of the mill is required to cut .
End Mill Terminology
helical rake (helix angle)
An end mill is a straight or tapered shank milling cutter, which
extends or projects from the milling machine spindle unobstructed.
It is one of the most versatile and most-used of the cutting tools
in any machine shop . It is capable of milling, drilling, reaming,
planning, shaping, contour cutting and more . Improvements in
cutting efficiency through both design and material changes have
only increased the use of this style of tool .
C
Length of Cut: The effective axial length of the relieved peripheral
cutting edge .
Radial Rake: The angle between the tooth face and a radial line
passing through the cutting edge in a plane perpendicular to the
cutting axis .
Rake: The angular relationship between a reference plane or line
and the tooth face or a tangent to the tooth face at a given point .
Relief: The result of the removal of tool material behind or adjacent
to the cutting edge . Provides clearance and prevents rubbing .
Relief Angle: The angle formed between a relieved surface and a
point on the cutting edge, or a given plane tangent to the axis .
Right Hand Cut: When viewed from the cutting end of the mill,
a counterclockwise rotation is required to cut . Most end mills are
right hand cut .
Shank: The projecting portion of a cutter which locates and drives
the cutter from the machine spindle .
Tooth Face: The surface of the tooth on which the chip forms .
C-33

Burrs End Mills Cutters, Tool Bits

Transcription

Similar documents

stock Hello Kitty 1 a 25

Departamento Administrativo Nacional de Estadística CENSO

virtual flyer - Bercor Industriel Inc.

CUTTING TOOLS

Prices valid till 31st December 2015

Mit Werten führen - Institut für Ethik und Werte

Systèmes de surveillance de portes avec contrôle d`accès

HOW TO ORDER REPAIR PARTS