For the BB5000 Portable Boring Machine BB5000 Facing
Transcription
For the BB5000 Portable Boring Machine BB5000 Facing
all 3.qxp 7/13/06 3:25 PM Page 1 BB5000 Facing & Grooving Head Accessory Dimensional Drawings, Ordering Information BB5000 Facing and Grooving Head Accessory Dimensions in inch (mm) BB5000 Facing & Grooving Head Dimensions (Front View, Standard Model) FEATURES • TECHNICAL DATA BB5000 Facing & Grooving Head Dimensions (Front View, Standard Model) For the BB5000 Portable Boring Machine Extend the versatility of your Climax BB5000 Portable Boring System by adding our combination Facing Head & Grooving Tool. This popular accessory is designed for easy set-up and operation, and a high level of accuracy and precision. The Facing Head & Grooving Tool is perfect for your boring procedures that also require you to machine end flanges which are truly flat and perpendicular to your central bore axis, or which may call for machining precision grooves to accommodate O-rings, snap-rings or special lubrication processes. Easy, flexible, setup and operation: The Facing Head & Grooving Tool attaches directly to the Climax BB5000 Boring Machine. The assembly clamps securely to any location along the boring bar for quick and easy setup. You can mount this tool to face either the front or rear side of the work piece. One setup for boring, facing and grooving: The Facing Head & Grooving Tool saves time and provides an added assurance of accuracy and alignment. By utilizing a single machine mounting setup for all machining operations, you’ll be assured that your facing and grooving procedures are square and perfectly concentric to your central bore. Plus inboard and outboard end faces can be cut truly parallel to one another utilizing just one boring machine setup. Change feed rates on the fly: The Facing Head & Grooving Tool has been designed to allow you to vary the feed rate without having to stop the facing head rotation, to get the job done fast. Feed rate can be varied from 0.0 0.05 inches (0.0 - 1.3 mm) per revolution. The Facing Head & Grooving Tool is available in both a standard model and in a specially designed compact version for use where operating space is limited. Compact model shown Product Warranty: Climax warrants that all new machines and accessories are free of defects in materials and workmanship for a period of one year after delivery. Within the warranty period, Climax will, at its option, either repair or replace the defective machine. • Standard Model 36954 19 inches (483 mm) Facing: ø2.5 - 19 inches (64 - 483 mm) Grooving: ø4 - 19 inches (102 - 483 mm) • Compact Model 36936 12 inches (305 mm) Facing: ø 2.5 - 12 inches (64 - 305 mm) Grooving: ø4 - 12 inches (102 - 305 mm) • Tool Kits Facing 36370 Grooving 35950 15º for snap rings 0º for “O” rings Technical Information: • Tool mounts any place on the bar. • Includes facing and grooving tool bits and dial indicator (uses standard 0.5 inch or 12 mm square tool bits). • Shipping weight: 45 lbs. (20.4 Kg) • Container dimensions: (L, W, H) 20 x 24 x 9 inches (508 x 610 x 229 mm) BB5000 Facing & Grooving Head Dimensions (Front View, Compact Model) BB5000 Facing & Grooving Head Dimensions (Front View, Compact Model) Call Climax for: Rentals With six locations in the USA, two in Canada, one in Europe, and one in Asia, you are never far away from a Climax portable machine tool. Special Projects Climax has been solving complicated on-site machining problems for our customers since 1964. Ordering Information On-site Training Need some refresher courses in setting up and operating your Climax machine tool? Call us. We’ll bring the solution to you. BB5FG-1M0706 ® Portable Machine Tools, Inc. B r i n g i n g t h e s o l u t i o n t o Corporate Headquarters Climax Portable Machine Tools, Inc. 2712 E. Second Street Newberg, Oregon 97132 USA Worldwide Telephone: 503.538.2185 N. America Toll-Free: 800.333.8311 Fax: 503.538.7600 Email: [email protected] European Headquarters Climax GmbH Willi - Bleicher - Strasse 11 52353 Düren, Germany Telephone: (+49) (0) 2421.9177.0 Fax: (+49) (0) 2421.9177.29 Email: [email protected] ® Portable Machine Tools, Inc. www.cpmt.com y o u . Copyright © 2006 Climax Portable Machine Tools, Inc. All Rights Reserved. all 3.qxp 7/13/06 3:25 PM Page 1 BB5000 Facing & Grooving Head Accessory Dimensional Drawings, Ordering Information BB5000 Facing and Grooving Head Accessory Dimensions in inch (mm) BB5000 Facing & Grooving Head Dimensions (Front View, Standard Model) FEATURES • TECHNICAL DATA BB5000 Facing & Grooving Head Dimensions (Front View, Standard Model) For the BB5000 Portable Boring Machine Extend the versatility of your Climax BB5000 Portable Boring System by adding our combination Facing Head & Grooving Tool. This popular accessory is designed for easy set-up and operation, and a high level of accuracy and precision. The Facing Head & Grooving Tool is perfect for your boring procedures that also require you to machine end flanges which are truly flat and perpendicular to your central bore axis, or which may call for machining precision grooves to accommodate O-rings, snap-rings or special lubrication processes. Easy, flexible, setup and operation: The Facing Head & Grooving Tool attaches directly to the Climax BB5000 Boring Machine. The assembly clamps securely to any location along the boring bar for quick and easy setup. You can mount this tool to face either the front or rear side of the work piece. One setup for boring, facing and grooving: The Facing Head & Grooving Tool saves time and provides an added assurance of accuracy and alignment. By utilizing a single machine mounting setup for all machining operations, you’ll be assured that your facing and grooving procedures are square and perfectly concentric to your central bore. Plus inboard and outboard end faces can be cut truly parallel to one another utilizing just one boring machine setup. Change feed rates on the fly: The Facing Head & Grooving Tool has been designed to allow you to vary the feed rate without having to stop the facing head rotation, to get the job done fast. Feed rate can be varied from 0.0 0.05 inches (0.0 - 1.3 mm) per revolution. The Facing Head & Grooving Tool is available in both a standard model and in a specially designed compact version for use where operating space is limited. Compact model shown Product Warranty: Climax warrants that all new machines and accessories are free of defects in materials and workmanship for a period of one year after delivery. Within the warranty period, Climax will, at its option, either repair or replace the defective machine. • Standard Model 36954 19 inches (483 mm) Facing: ø2.5 - 19 inches (64 - 483 mm) Grooving: ø4 - 19 inches (102 - 483 mm) • Compact Model 36936 12 inches (305 mm) Facing: ø 2.5 - 12 inches (64 - 305 mm) Grooving: ø4 - 12 inches (102 - 305 mm) • Tool Kits Facing 36370 Grooving 35950 15º for snap rings 0º for “O” rings Technical Information: • Tool mounts any place on the bar. • Includes facing and grooving tool bits and dial indicator (uses standard 0.5 inch or 12 mm square tool bits). • Shipping weight: 45 lbs. (20.4 Kg) • Container dimensions: (L, W, H) 20 x 24 x 9 inches (508 x 610 x 229 mm) BB5000 Facing & Grooving Head Dimensions (Front View, Compact Model) BB5000 Facing & Grooving Head Dimensions (Front View, Compact Model) Call Climax for: Rentals With six locations in the USA, two in Canada, one in Europe, and one in Asia, you are never far away from a Climax portable machine tool. Special Projects Climax has been solving complicated on-site machining problems for our customers since 1964. Ordering Information On-site Training Need some refresher courses in setting up and operating your Climax machine tool? Call us. We’ll bring the solution to you. BB5FG-1M0706 ® Portable Machine Tools, Inc. B r i n g i n g t h e s o l u t i o n t o Corporate Headquarters Climax Portable Machine Tools, Inc. 2712 E. Second Street Newberg, Oregon 97132 USA Worldwide Telephone: 503.538.2185 N. America Toll-Free: 800.333.8311 Fax: 503.538.7600 Email: [email protected] European Headquarters Climax GmbH Willi - Bleicher - Strasse 11 52353 Düren, Germany Telephone: (+49) (0) 2421.9177.0 Fax: (+49) (0) 2421.9177.29 Email: [email protected] ® Portable Machine Tools, Inc. www.cpmt.com y o u . Copyright © 2006 Climax Portable Machine Tools, Inc. All Rights Reserved.
Similar documents
BB5000 Facing Head, 24 inches
On-site Training Rentals Need some refresher courses in setting up With 21 worldwide rental depot locations, you are never far away from a CLIMAX tool. and operating your CLIMAX machine tool?
More information