ICF-SW55
Transcription
ICF-SW55
ICF-SW55 SERVICE MANUAL Ver 1.1 2002.12 US Model Canadian Model AEP Model UK Model E Model Australian Model LW/MW/SW/FM STEREO PLL SYNTHESIZED RECEIVER 9-956-854-12 Sony Corporation 2002L0200-1 © 2002.12 Personal Audio Company Published by Sony Engineering Corporation ICF-SW55 SERVICE MANUAL Ver 1.1 2002.12 SUPPLEMENT - 1 File this Supplement with the Service Manual. Subject : z CHANGE OF ELECTRICAL PARTS z CHANGE OF MICRO COMPUTER BOARD 9-956-854-81 US Model Canadian Model AEP Model UK Model E Model Australian Model ICF-SW55 Electrical parts and microcomputer board became changes from the middle of the production. HOW TO DISTINGUISH A NEW TYPE It is a new type if the code No. printed on the microcomputer board is 1-640-742-15. • CHANGED ELECTRICAL PART LIST MICRO COMPUTER Ref.No. C925 IC904 IC905 R1001 R1002 R1003 R1004 RV901 RV902 2 FORMER TYPE Part No. NEW TYPE Description 1-163-089-00 CERAMIC CHIP 6PF 8-759-551-69 IC M6M80021FP (10pin) 8-759-551-69 IC M6M80021FP (10pin) ________________________________________ ________________________________________ ________________________________________ ________________________________________ 1-241-581-11 1-241-581-11 RES, ADJ, CERMET RES, ADJ, CERMET 100K 100K 50V Part No. Description ________________________________________ 8-759-464-95 IC AK6420AF-E2 (8pin) 8-759-464-95 IC AK6420AF-E2 (8pin) 1-216-091-00 METAL CHIP 56K 1-216-086-00 METAL CHIP 36K 1-216-091-00 METAL CHIP 56K 1-216-086-00 METAL CHIP 36K ________________________________________ ________________________________________ 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W ICF-SW55 PRINTED WIRING BOARD – MICRO COMPUTER SECTION – Last digit : -15 3 2 1 4 5 6 C914 25 41 C927 15 R941 R911 R1003 C939 R945 1 C917 R904 C902 80 R916 US,CND,E2 MODEL R905 5 R909 64 65 IC906 R907 IC901 R942 321 C910 28 29 R918 R913 H901 PL1 EA MODEL D903 C929 R958 C928 H902 C916 D904 R959 R957 B R912 C915 EA,IT MODEL R1002 ECB Q903 R998 8 R906 R1004 4 IC911 1 R1001 R961 14 15 24 2AE2,G,EA,IT MODEL X901 11 R914 IT MODEL 1 D907 40 10 R922 R921 R920 R919 Q901 R956 R812 C901 R917 Q916 D905 D906 R908 ECB R901 ECB R997 BCE R860 C912 C913 D901 C906 C971 R902 C970 D918 Q902 9 KEY BOARD MICRO COMPUTER BOARD (SIDE B) MICRO COMPUTER BOARD (SIDE A) A 8 7 96 95 IC903 LCD901 1 42 C 43 56 S904 (TEST) D S901 (RESET) E C969 7 R820 1 14 1 R943 R982 C938 C951 IC902 Q906 D909 IC908 S902 TIME SET 14 C924 R814 C922 C923 C909 C942 R965 X902 80 R935 R933 C905 R928 R927 R926 R925 R924 R923 R939 R937 14 8 IC910 1 7 R931 R929 R930 S903 LIGHT/BATT CHECK Q905 R934 ECB S905 LOCK R903 t 61 ECB 8 ECB R989 R987 R963 Q910 R990 1 60 C966 R964 1 2 3 R938 R996 Q915 C940 IC907 14 1 IC913 C967 1 2 3 R815 R932 R936 R940 Q907 BCE BCE R973 R851 20 R955 R968 R969 R977 R981 R978 ECB ECB BCE C931 R976 D908 R975 Q908 BCE R992 C934 C964 C935 R979 C933 C932 H C965 21 41 R995 R971 D912 C919 C920 40 1 8 R993 7 R988 R972 R966 C921 Q914 7 1 R861 D911 IC912 IC905 24 R980 Q909 R999 D910 8 5 R974 190 R984 R967 A C941 G C960 C961 4 Q911 C936 8 BCE Q913 1 R994 5 Q912 R954 C962 R991 R970 SIGNAL BOARD R983 1 R813 CN901 1 4 R950 C963 R816 IC904 C937 R841 BCE R944 14 8 R986 R985 F D902 C950 IC914 BCE IC915 8 7 Q904 1-640-742- POWER S905 3 15 (15) 1-640-742- 3 15 (15) ICF-SW55 SCHEMATIC DIAGRAM – MICRO COMPUTER SECTION – Last digit : -15 For printed wiring board. Note: • z : Through hole. • :: Pattern from the side which enables seeing. (The other layers’ patterns are not indicated.) page 23 (Location H-I, 17-20) ! : Changed portion Caution: Pattern face side: (Side B) Parts face side: (Side A) ! • Abbreviation CND : Canadian model IT : Italian model G : Germany model EA : Saudi Arabia model • 1AE2, 2AE2 : This shows the differences of the FM/SW frequency bands. ! (Location D-F, 6-13) ! ! ! ! Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated. ! ! ! 4 4 • Semiconductor Location Ref. No. Location D901 D902 D903 D904 D905 D906 D907 D908 D909 D910 D911 D912 D918 A-3 F-2 B-3 B-2 A-3 A-3 A-4 H-2 H-2 G-3 G-3 G-5 A-2 H901 H902 B-5 B-6 IC901 IC902 IC903 IC904 IC905 IC906 IC907 IC908 IC910 IC911 IC912 IC913 IC914 IC915 B-3 G-4 C-2 F-2 G-2 C-3 G-5 G-5 H-5 B-6 G-3 G-3 F-2 E-2 Q901 Q902 Q903 Q904 Q905 Q906 Q907 Q908 Q909 Q910 Q911 Q912 Q913 Q914 Q915 Q916 A-3 A-2 B-5 H-5 H-5 H-2 H-2 H-2 H-2 H-3 F-3 F-3 G-2 G-3 H-2 A-2 ICF-SW55 Printing Method for Large Sized Documents Such As Circuit Diagrams Printing the page that exceeds A4-size two pages (or letter size) is possible by specifying the print range. (Acrobat Reader Version 4.0 or later) 1. The enlarged print is made, if a smaller range than A4 size is specified and the A4 size is selected as a print paper. 2. Almost real sized print is made, if the range is specified, meeting the print paper size. 3. The reduced print is made, if a larger range than the print paper size is specified. Printing by Specifying a Range In printing out the drawings such as a schematic diagram and a printed wiring board larger than the printed paper size, they can be printed by specifying the range. (Acrobat Reader Version 4.0 or later) 1. Display the page to be printed. 2. From the File menu, select [Page Setup] and set the paper size. 3. From the Command bar, select [Graphic Select Tool]. (Keep pressing T , select ) 4. Dragging the cursor, enclose the range on the page to be printed. 5. From the File menu, select [Print] and make sure that the [Selected Graphic] is already checked. Also, if [Fit to page] is checked, the selected range is enlarged or reduced (and rotated as necessary) meeting the paper size. @ ! 6. To cancel the printed range, click an arbitrary position on the screen. 5 ICF-SW55 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date 1.0 1991. 12 New 1992.05 Correction-1 (9-956-854-91) 2002. 12 Change of electrical parts and microcomputer board. 1.1 Description of Revision Including correction-1. (ECN-TRA01918)
Similar documents
CDX-M700R/M750
35 dB at 1 kHz Frequency response 30 – 15,000 Hz AM (CDX-M750) Tuning range Antenna terminal Intermediate frequency Sensitivity
More informationAiwa CDC-R504MP, CDC-X504MP Service manual. www.s
Power antenna relay control terminal Power amplifier control terminal Telephone ATT control terminal (AEP, UK Model) Antenna input terminal Low: ±10 dB at 60 Hz (HIP-HOP) Mid: ±10 dB at 1 kHz (HIP-...
More information