DEH-P6700MP/XM/EW

Transcription

DEH-P6700MP/XM/EW

ORDER NO.
CRT3435
DEH-P6700MP/XM/EW
MULTI-CD CONTROL HIGH POWER CD/MP3/WMA PLAYER WITH RDS TUNER
DEH-P6700MP
/XM/EW
This service manual should be used together with the following manual(s):
Model No.
CX-3158
Order No.
CRT3394
Mech.Module
S10.1AAC
Remarks
CD Mech. Module : Circuit Description, Mech. Description, Disassembly
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
K-ZZA. FEB. 2005 Printed in Japan
1
2
3
4
SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
A
1. Safety Precautions for those who Service this Unit.
• When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.
Caution:
1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.
B
2. A “CLASS 1 LASER PRODUCT” label is affixed to the
bottom of the player.
3. The triangular label is attached to the mechanism
unit frame.
CLASS 1
LASER PRODUCT
C
4. Specifications of Laser Diode
D
Specifications of laser radiation fields to which human access is possible during service.
Wavelength = 800 nanometers
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.
E
- Service Precaution
1. You should conform to the regulations governing the product (safety, radio and noise, and other
regulations), and should keep the safety during servicing by following the safety instructions
described in this manual.
2. Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside the unit.
3. To protect the pickup unit from electrostatic discharge during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY".
4. After replacing the pickup unit, be sure to check the grating.
F
2
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
[Important Check Points for Good Servicing]
In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures.
A
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
3 Make sure the soldering of repaired locations is properly performed.
B
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.
C
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
0 Safe environment should be secured during servicing.
D
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the specified substance.
Make sure the proper amount is applied.
E
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
5. Shipping mode and Shipping screws
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be
installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
F
DEH-P6700MP/XM/EW
5
6
7
8
3
1
2
3
4
CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6
2.1 PACKING ................................................................................................................................................... 6
2.2 EXTERIOR................................................................................................................................................. 8
2.3 CD MECHANISM MODULE..................................................................................................................... 10
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 12
3.1 BLOCK DIAGRAM ................................................................................................................................... 12
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE).............................................................................. 14
3.3 KEYBOARD UNIT.................................................................................................................................... 20
3.4 CD MECHANISM MODULE(GUIDE PAGE) ............................................................................................ 22
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 32
4.1 TUNER AMP UNIT................................................................................................................................... 32
4.2 KEYBOARD UNIT.................................................................................................................................... 36
4.3 CD CORE UNIT(S10.1) ........................................................................................................................... 38
4.4 PANEL UNIT ............................................................................................................................................ 40
5. ELECTRICAL PARTS LIST ............................................................................................................................ 41
6. ADJUSTMENT ............................................................................................................................................... 47
6.1 CD ADJUSTMENT................................................................................................................................... 47
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT .................................................... 49
6.3 ERROR MODE ........................................................................................................................................ 51
7. GENERAL INFORMATION ............................................................................................................................. 52
7.1 DIAGNOSIS ............................................................................................................................................. 52
7.1.1 DISASSEMBLY ..................................................................................................................................... 52
7.1.2 CONNECTOR FUNCTION DESCRIPTION .......................................................................................... 55
7.2 PARTS...................................................................................................................................................... 56
7.2.1 IC .......................................................................................................................................................... 56
7.2.2 DISPLAY ............................................................................................................................................... 65
7.3 OPERATIONAL FLOW CHART ............................................................................................................... 66
7.4 CLEANING............................................................................................................................................... 67
8. OPERATIONS ................................................................................................................................................ 68
A
B
C
D
E
F
4
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
1. SPECIFICATIONS
A
B
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
5
1
2
3
4
2. EXPLODED VIEWS AND PARTS LIST
NOTES : • Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
• The > mark found on some component parts indicatesthe importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screw adjacent to mark on the product are used for disassembly.
• For the applying amount of lobricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
A
"
2.1 PACKING
B
C
D
E
F
6
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
PACKING SECTION PARTS LIST
Mark No.
*
*
Description
Mark No.
Part No.
1
2
3
4
5
Polyethylene Bag
Cord Assy
Accessory Assy
•••••
Screw Assy
CEG-162
CDE7059
CEA4993
6
7
8
9
10
Fixing Screw
Screw
Polyethylene Bag
Screw
Screw
BPZ20P060FZK
CBA1650
CEG-127
CRZ50P090FTC
TRZ50P080FTC
11
12
13
14
15
Polyethylene Bag
Handle
Holder
Holder
Bush
CEG-158
CNC5395
CND1249
CND1250
CNV3930
*
CEA3848
16
17
18
19
20
21
22-1
22-2
22-3
22-4
Description
Part No.
Remote Control Unit
Battery
Carton
Contain Box
Protector
CXC3173
CEX1065
CHG5476
CHL5476
XHP7003
Protector
Owner's Manual
Owner's Manual
Owner's Manual
Installation Manual
XHP7004
CRD3959
CRD3960
CRD3961
CRD3962
A
B
*
*
22-5 Passport
22-6 Warranty Card
23 Case Assy
CRY1013
CRY1157
CXB3520
Owner's Manual,Installation Manual
Part No.
Language
CRD3959
English, Spanish
CRD3960
German, French
CRD3961
Italian, Dutch
CRD3962
English, Spanish, German, French, Italian, Dutch
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
7
1
2
3
4
3
4
2.2 EXTERIOR
A
B
C
D
E
F
8
DEH-P6700MP/XM/EW
1
2
5
6
7
8
EXTERIOR SECTION PARTS LIST
Mark No.
>
Description
Mark No.
Part No.
1
2
3
4
5
Screw
Screw
Screw
Screw
Cord Assy
BMZ30P040FZK
BSZ26P060FTC
BSZ30P060FTC
BSZ30P200FTC
CDE7059
6
7
8
9
10
Cap
Cable
Earth Plate
Insulator
Cushion
CKX-003
CDE7189
CNC8915
CNM7682
CNM8890
11
12
13
14
15
Tuner Amp Unit
Screw
Screw
Screw
Fuse(10A)
CWM9790
ASZ26P060FTC
BPZ26P080FTC
BSZ26P160FTC
CEK1208
16
17
18
19
20
FM/AM Tuner Unit
Holder
Pin Jack(CN351)
Plug(CN981)
Connector(CN101)
CWE1645
CND1054
CKB1054
CKM1376
CKS3408
21
22
23
24
25
Plug(CN831)
Connector(CN721)
Connector(CN671)
Antenna Jack(CN401)
Holder
CKS3537
CKS3837
CKS4124
CKX1056
CND1352
26
27
28
29
30
Heat Sink
Terminal(CN402)
Holder
Insulator
Holder Unit
CNR1668
VNF1084
XNC7003
XNM7031
CXB6681
31
32
33
34
35
36
37
38
39
40
Remote Control Unit
Cover
Button(EJECT)
Screw(M2x4.5)
Screw(M2x4)
Washer
Spring
Spring
Spring
Spring
CXC3173
CNS7068
CAC7752
CBA1647
CBA1649
CBF1038
CBH2650
CBH2651
CBH2652
CBH2653
41
42
43
44
45
Holder
Gear
Arm
Arm
Arm
CND1254
CNV5997
CNV7400
CNV7401
CNV7402
46
47
48
49
50
Arm
Panel Unit
Connector(CN1951)
Connector(CN1950)
Holder Unit
CNV7403
CWM9781
CKS4806
CKS5192
CXB9501
Description
52
53
54
55
Damper Unit
Sub Panel Unit
Cover
Lighting Conductor
CXB9503
XXA7361
CNM6854
CNV6487
56
57
58
59
60
Spring
Pin
Chassis Unit
Detach Grille Assy
Screw
CBL1512
CNV6486
CXC4063
CXC4175
BPZ20P100FZK
61
62
63
64
65
Button(DISPLAY)
Button(SW)
Button(1-6)
Button(SOURCE)
Button(BAND)
CAC9036
CAC9037
CAC9038
CAC9039
CAC9040
66
67
68
69
70
Button(TA)
Button(FUNCTION, AUDIO)
Button(EQ, ILLUMINATION)
Spring
Sheet
CAC9041
CAC9042
CAC9043
CBL1470
CNM9482
71
72
73
74
75
Sheet
Sheet
Cover
Lighting Conductor
Lighting Conductor
CNM9560
CNM9561
CNS8149
CNV8361
CNV8362
76
77
78
79
80
Lighting Conductor
LCD(LCD1)
Connector(CN1)
Holder
Sheet
CNV8363
CAW1865
CKS5207
CND2510
CNM9366
81
82
83
84
85
Sheet
Connector
Lighting Conductor
Cushion
86
87
88
89
90
Sub Grille Assy
Knob(VOLUME)
Button(OPEN)
Spring
91
92
93
94
95
Screw
Label
Case
Insulator
Insulator
ISS26P055FTC
VRW-329
XNB7002
XNM7100
XNM7106
96
97
98
99
100
Panel
Choke Coil(L981)
IC(IC301)
IC(IC911)
Transistor(Q751, 901)
XNS7089
CTH1291
PAL007A
NJM2388F84
2SD2396
Holder Unit
B
C
D
CXC4243
XAA7021
XAC7065
XBH7001
CD Mechanism Module(S10.1AACA) CXK5668
E
F
TSOP4840SB1
CXB9502
DEH-P6700MP/XM/EW
5
A
CNM9367
CNV8275
CNV8360
XNM7049
Sub Button Assy(UP, DOWN, LEFT, RIGHT) CXC4242
101 IC(IC3)
51
Part No.
6
7
8
9
1
2
3
4
2.3 CD MECHANISM MODULE
5
42
13
A
81
34
5
15
13
22
E
5
F
93
13
92
A
B
44
5
54
1
13
C
G
83
86
68
D
52
B
26
82
86
53
28
I
H
4
28
37
71
4
23
1
55
4
1
2
J
87
36
5
45
50
73
23
72
18 29
51
64
38
K
10
47
75
1
C
I
2
24
76
B
49
1
7
61
E
M
2
A
Q
27
8
H
21
G
L
M
1
57
D
90
48
1
79
77
F
1
63
2
59
N
D
O
R
16
17
12
1
58
67
J
3
1
78
33
P
2
62
46
60
20
2
80
40
1
6
1
N
1GEM1024
2GEM1045
3GEM1035
1
11
1
25
69
P
43
L
30
19
56
60
39
K
70
14
E
74
41
R
85
31
C
91
14
C
65
1
3
F
Q
35
O
85
31
2
66
85
10
DEH-P6700MP/XM/EW
1
2
3
4
89
10
5
6
7
8
CD MECHANISM MODULE SECTION PARTS LIST
Mark No.
Description
Mark No.
Part No.
1
2
3
4
5
CD Core Unit(S10.1)
Connector(CN101)
Connector(CN901)
Screw
Screw
CWX3096
CKS4182
CKS4017
BMZ20P035FTC
BSZ20P040FTC
6
7
8
9
10
Screw(M2x4)
Screw(M2x3)
Screw(M2x3)
•••••
Washer
CBA1362
CBA1824
CBA1825
11
12
13
14
15
Washer
Spring
Spring
Spring
Spring
CBF1060
CBH2390
CBH2606
CBH2607
CBH2608
16
17
18
19
20
Spring
Spring
Spring
Spring
Spring
CBH2609
CBH2610
CBH2735
CBH2612
CBH2613
21
22
23
24
25
Spring
Spring
Spring
Spring
Spring
CBH2614
CBH2615
CBH2616
CBH2617
CBH2620
26
27
28
29
30
Spring
Spring
Spring
Spring
Spring
CBH2621
CBH2641
CBH2642
CBH2643
CBH2659
31
32
33
34
35
Spring
•••••
Shaft
Frame
Frame
CBH2688
36
37
38
39
40
Bracket
Bracket
Arm
Arm
Lever
CND2712
CND1895
CNC9968
CND1909
CND2032
41
42
43
44
45
Lever
Sheet
Collar
Guide
Arm
CNC9984
CNM8134
CNV7798
CNV7799
CNV8403
46
47
48
49
Rack
Holder
Holder
Arm
CNV8374
CNV8376
CNV8377
CNV8378
CBF1038
CLA4441
CNC9962
CNC9963
Description
Part No.
50
Gear
CNV8379
51
52
53
54
55
Gear
Gear
Gear
Gear
Gear
CNV8380
CNV8381
CNV8382
CNV8383
CNV8384
56
57
58
59
60
Rack
Arm
Arm
Guide
Roller
CNV8385
CNV8386
CNV8387
CNV8388
CNV7218
61
62
63
64
65
Gear
Arm
Arm
Arm
Damper
CNV8389
CNV8391
CNV8390
CNV8392
CNV7313
66
67
68
69
70
Damper
Arm
Arm
Guide
Guide
CNV7314
CNV8394
CNV8395
CNV8396
CNV8397
71
72
73
74
75
Holder
Arm
Gear
Damper
Motor Unit(M1)
CNV8398
CNV8402
CNV8400
CNV7618
CXC4440
76
77
78
79
80
Chassis Unit
Screw Unit
Gear Unit
Arm Unit
Arm
CXC2318
CXB8729
CXC2397
CXC2316
CND1896
81
82
83
84
85
Arm
Motor Unit(M2)
Bracket
•••••
Screw(M2x5)
CND1894
CXB8933
CNC9985
86
87
88
89
90
Screw
Screw
•••••
Washer
Pickup Unit(P10)(Service)
YE20FTC
CXX1641
91
92
93
Screw
Spring
Clamper
IMS26P030FTC
CBL1635
CNV8372
6
B
C
D
EBA1028
JFZ20P020FTC
JGZ17P022FTC
E
F
DEH-P6700MP/XM/EW
5
A
7
8
11
1
2
3
4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
3.1 BLOCK DIAGRAM
A TUNER AMP UNIT
5V
OSC
B
ANTENNA
TUNPDI
RDS_HSLK
RDS_CK
LDET
RDS_DATA
18 19 20 21
RDS_LOCK
14
DO
11
CE1
DI
IC3 EEPROM
5.0V
CK
10 9 8
SL
ROM_VDD
WC
5
LDET
TUNPDO
CE2
13
CE2
7 6
FM/AM TUNER UNIT
TUNPCK
VDD
IC5
3.3V
←
A
LPF
CN401
AM ANT
1
1
FMRF
ATT
Rch
2,3
3
IC1
3.3V
FM ANT
ATT
FMRF
RDS_HSLK
Lch
MIXER, IF AMP
23
DET, FM MPX,
RDS DECODER
RF adj
ANT adj
RDS_DATA
24
IC2
2.5V
5
7
IC431
NJM4558MD
RDS_CK
RDS_LOCK
T51
CF52
AUDIOGND
NC
15
22
16
VDD_3.3
DGND
12
VCC
OSCGND
2
4
ELE
SO
IC4
3.3V 2.5V 2.5V
←
C
RFGND
CF51
3.3V
TUN L
41
IN2
17
44
TUN3.3V
IN4
43
IN4
SYS+B
42
IN3
EVCK EVDT EVST
CDL
CN101
IP-BUS
11 BUSL7 BUSL+
Q101
8
B.UP
Q102
71
ASENBO
C CD CORE UNIT(S10.1)
PICKUP UNIT
(P10)(SERVICE)
D
5
5
1
6
BUSBUS+
DIN1
IC101
HA12240FP
DOUT
STBY
V3R3D
2
85
8
24
LDMD
15
15
5
5
142
Q101
143
FOCUS ACT.
MONITOR TRACKING ACT.
DIODE
TX
RX
IPPW
LD+
14
1
4
M2
LOADING/CARRIAGE
MOTOR
LOUT
31
10
14
15
9
IC601(2/2)
PE5468A
CDL
LOUT
FOP
TOP
FD,TD
14
SD,MD
X701
12
FOP
13
TOP
M1
SPINDLE
MOTOR
SYSTEM CONTRO
CN721
CN901
RF AMP, CD DECODER,
LOUT
MP3 AND WMA DECODER,
DIGITAL SERVO/DATA PROCESSOR
E,F
FOP
1
TOP
4
IC201
UPD63763GJ
LD
PD
AC,BD
HOLOGRAM
UNIT
12
16
SOP
15
SOM
18
LCOP
17
LCOM
M
13
X1
CD
DRIVER
M
LOEJ
CONT
22
53
9
47
X2
MICRO
COMPUTER
RG
reset
LOEJ
RESET
14
IC701
PE5454A
31
30
97
BRST,BRXEN,BSRQ
VD
12EJ
8EJ
DSCSNS
3
BRST,BRXEN,BSRQ,BDATA,BSCK
VDCONT
CD3VON
3
21
4
20
Q751
VD1
B.UP
3
49
46
1
4
2
5 VDCONT
19
S905
S901
S903
8EJ DSCSNS HOME
IC203
NJM2885DL1-33
Q753
HOME
Q761
VD2
V3R3D
A
5
VDCONT
S904
12EJ
RST2
BDATA,BSCK
VD
32
RESET
CONT
IC301
BA5835FP
2
22
1
23
5
19
VD2
Q762
VD2
CD3VON
3.3V REGULATOR
CD3VON
3V REGULATOR
F
3VDD
3
IC703
2
VDD
VDD
S-812C33AUA-C2N
VDD
12
ASENBO
CN101
LASER
DIODE
E
86
1
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
CN671
WIRED REMOTE CONTROL
2
A
3
1
CN351
RESET
1
RST2
A
IC651
BD4834G
2
VDD
Q352
58
Q351
RESET
11
TUNPDO
STRKEY2
STRKEY1
RL
8
SUBWOOFER OUTPUT
NON FADING OUTPUT
FL
4
FRONT OUTPUT
75
98
TUNPDO
88 LDET
94
TUNPDI
74
SL
97 TUNPCK
LDET
TUNPDI
SL
TUNPCK
CE1
SP601
PEE
100
VDD 5V REG
99
TUNPCE
32 TUNPCE2
CE2
Q901
B
VDD
Q902
SYSTEM CONTROLLER
Q421
RDS_DATA
45
RDS_HSLK
42
7
IC601(1/2)
PE5468A
RDT
DALMON
10
RDS57K
BACKUP SENSE
Q422
MD
RDS_CK
89
RDS_LOCK
44 RDSLK
BSENS
RCK
ASENS
93
BSENS
92
ASENS
CN981
B.UP
FUSE
16
16
BACK UP
10A
Q931
ACC
14
14
TEL IN
TELIN
ACC
Q951
ACC SENSE
7
VDD
15
15
9
9
7
7
FL-
5
5
FL+
8
RLRL+
GND
B.UP
AMP
TUN L
41
Frontout_L
IN2L
IC251
PML009A
Rearout_L
44
IN4-L
Preout_L
43
42
10
14
11
12
RLIN
FL-
IC301
PAL007A
FL+
FLIN
RLRL+
12
22
MUTE
B.REMOTE
STBY
4
IN3L
3
8
5
25
6
6
11
11
TUN 3V REG.
3
TUN3.3V
B.REM
IC921
NJM2391DL1-33
SYS 8V REG.
1
IC911
NJM2388F84
2
1
B.UP
4
SYSPW
37
21
SYSPW
BACK
UP
B.
REM
W
GND ACC
SYSTEM CONTROLLER
X1
IC601(2/2)
PE5468A
X2
C
B.UP
B.UP
SYSPW
21
SYS+B
Q371
Q391
MUTE
23
MUTE
MUTE
Q301
ENBO
TEL
VCC3/4 VCC1/2
IN4+L
EVCK, EVDT, EVST
CDL
6
20
ELECTRONIC VOLUME/
SOURCE SELECTOR
RR
FR
FL
RL
-
RR
+
FR
+
FL
+
RL
+
D
16
15
X601
12.58291MHz
D
CN831
B.UP
Q881
ILB
10
B
PANEL UNIT
ILB
10
KEYBOARD UNIT
CN1
CN1951
CN1950
5
8
BL+B
Q882
5
ILMPW
RGBST/SRC
RGBCK
RGBDT
(RGB)
IC2
MB88347PFV-G-BND
20
59
RGBST(SRC)
60
RGBCK
61
RGBDT
4
4
3
3
7
7
RGBLD
RGBCK
RGBDT
3
10
DAST
12
12
1
DACLK
13
4
9
DADT
14
Q1-Q14
A02-A07
LD(B)
LED DRIVE
CLK(R)
E
DI(G)
S1970
RGB CONTROLLER
EJECTIN
8
EJSW
8
8
5
5
2
2
Q861
EJILP
B.UP
EJECT
Q862
FLPILM
9
Q851
VDD
Q852
SWVDD
ROT1
ROT0
CSENS
DPDT
KYDT
DSENS
SWVDD
SWVDD
KEY MATRIX
2
11
SWVDD
VOLUME
1
SWVDD
REM.CON.
S1
56
ROT1
12
12
57
ROT0
13
13
77
CSENS 6
6
DPDT
96
95
KYDT
11
11
14
14
ROT1
ROT0
CSENS
DPDT
KYDT
7
6
9
4
11
2
10
3
8
5
3
ROT1 1
IC3
1
TSOP4840SB1
ROT0 2
17
RFM
3
DPDT
KYDT
S831
18
20
DPDT
KYDT
10
VLCD
56
VDD
90
KEY DATA
LCD DRIVER/
KEY CONTROLLER
IC1
PD6340A
XO
XI
22
23
X1
4.97MHz
F
LCD1
DSENS
DEH-P6700MP/XM/EW
5
6
7
8
13
1
2
3
4
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or
"ELECTRICAL PARTS LIST".
A-a
A
C
CD-DA, MP3 : 0.2dB
CN901
swvdd
dalmon
IP-BUS : 2.2dB
8 9 10 11
C
FM(30%)
AM(30%
IP-BUS
CD-DA, MP
5 6 7
1 2 3 4
B
mute
CSA30-201N
A-b
Large size
SCH diagram
EJECT
B
CN1
A-a
A-a
A-b
Guide page
DSENS
F
A-a
A-b
Detailed page
D
A D
14
PANEL UNIT
DEH-P6700MP/XM/EW
1
2
3
4
NC
NC
ASENSBO
TSCK/BSCK
FM(30%) : -26dB
AM(30%) : -26dB
E
TSI/BSI
FM/AM TUNER UNIT
D
BEEP
5
6
7
8
A-b
A
A
TUNER AMP UNIT
FRONT
R CH
FRONT
L CH
REAR
R CH
FM(30%) : -27dB
AM(30%) : -27dB
IP-BUS : 2.2dB
CD-DA, MP3 : 0.2dB
B
REAR
L CH
>
FM(30%) : -4.66dB
AM(30%) : -2.66dB
IP-BUS : 9.54dB
CD-DA, MP3 : 9.54dB
FM(30%) : -3.9dB
AM(30%) : -1.9dB
IP-BUS : 10.3dB
CD-DA, MP3 : 10.3dB
swvdd
dalmon
C
BEEP
D
>
NC
NC
ASENSBO
CEK1208
10A
FM(30%) : 22.1dB
AM(30%) : 24.1dB
IP-BUS : 36.3dB
CD-DA, MP3 : 36.3dB
E
NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.
Decimal points for resistor
and capacitor fixed values
are expressed as :
2.2 ← 2R2
0.022 ← R022
F
The > mark found on some component parts indicates
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
BACK
UP
B.
REM
GND ACC
RR
FR
FL
RL
-
DEH-P6700MP/XM/EW
5
6
7
8
RR
+
FR
+
FL
+
RL
+
A
15
1
2
3
4
DEH-P6700MP/XM/EW
8 9 10 11
IP-BUS : 2.2dB
16
A-a
5 6 7
1 2 3 4
F
C
CN901
CD-DA, MP3 : 0.2dB
E
D
A-a A-b
C
mute
B
2
1
dalmon
A-b
3
A
FM
AM
I
CD-D
1
2
3
4
5
6
7
8
DEH-P6700MP/XM/EW
17
A-a D
FM(30%) : -26dB
AM(30%) : -26dB
FM/AM TUNER UNIT
F
CSA30-201N
E
D
A-a A-b
B
CN1
D
PANEL UNIT
EJECT
C
DSENS
mute
B
TSCK/BSCK
TSI/BSI
ASENSBO
4
5
A-b
6
dalmon
A
NC
NC
5
6
7
8
F
A-b
18
1
1
2
BEEP
FM(30%) : -27dB
AM(30%) : -27dB
IP-BUS : 2.2dB
CD-DA, MP3 : 0.2dB
D
FM(30%) : -3.9dB
AM(30%) : -1.9dB
IP-BUS : 10.3dB
CD-DA, MP3 : 10.3dB
A-a A-b
A
>
TUNER AMP UNIT
B
FM(30%) : -4.66dB
AM(30%) : -2.66dB
IP-BUS : 9.54dB
CD-DA, MP3 : 9.54dB
REAR
L CH
REAR
R CH
FRONT
L CH
FRONT
R CH
2
3
2
3
3
dalmon
A
swvdd
1
4
C
E
DEH-P6700MP/XM/EW
4
BEEP
5
6
dalmon
ASENSBO
4
5
7
A-a A-b
6
DEH-P6700MP/XM/EW
8
GND ACC
B.
REM
RR
FR
FL
RL
-
RR
+
FR
+
FL
+
RL
+
7
BACK
UP
Decimal points for resistor
and capacitor fixed values
are expressed as :
2.2 ← 2R2
0.022 ← R022
FM(30%) : 22.1dB
AM(30%) : 24.1dB
IP-BUS : 36.3dB
CD-DA, MP3 : 36.3dB
6
The > mark found on some component parts indicates
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.
>
CEK1208
10A
5
8
A
B
C
D
E
NC
F
A-b
19
NC
swvdd
1
2
3
4
3.3 KEYBOARD UNIT
D
A
RGB CONTROLLER
CN1951
VOLUME
B
C
CAW1865
LCD DRIVER/
KEY CONTROLLER
D
REM. CON.
E
FUNCTION
ILLUMINATION
F
DISPLAY
B
20
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
B
A
KEYBOARD UNIT
B
C
D
E
: The power supply is shown with the marked box.
F
B B
DEH-P6700MP/XM/EW
5
6
7
8
21
1
2
3
4
3.4 CD MECHANISM MODULE(GUIDE PAGE)
A
F
T
C
S
C-a
PICKUP UNIT(P10)(SERVICE)
%
B
F
F
F
T
T
T
F
T
#
T
F
@
F
T
C
D
3
$
2
S
T
1
7
9
C
F
E
8
0
M1 CXC4440
SPINDLE MOTOR
4
5
TY
S
S
F
F
C
T
S
C
CD DRIVER
C
M2 CXB8933
LOADING
/CARRIAGE
MOTOR
S
T
C
F
C
22
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
A
C-b
SWITCHES:
CD CORE UNIT(S10.1)
S901:HOME SWITCH..........ON-OFF
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
ras
B
The underlined indicates the switch position.
SIGNAL LINE
F
T
C
S
!
FOCUS SERVO LINE
TRACKING SERVO LINE
CARRIAGE SERVO LINE
SPINDLE SERVO LINE
C
CD CORE UNIT(S10.1)
3.3V REGULATOR
C
D
SRAMLEVEL2
MICRO COMPUTER
A
3V REGULATOR
SRAMLEVEL1
CN721
SRAMLEVEL0
E
6
TYPE_A/D
^
&
F
C
DEH-P6700MP/XM/EW
5
6
7
8
23
F
C-a
24
E
1
2
3
T
#
@
C
F
F
2
T
T
T
T
T
B
F
F
%
C-b
F
F
C-a
A-a C-b
1
3
4
A
1
2
D
DEH-P6700MP/XM/EW
4
F
T
C
S
5
6
C
C
T
T
F
F
0
9
8
7
$
4
7
4
5
7
C-a
A-a C-b
CD DRIVER
5
C
S
3
S
S
F
T
6
M2 CXB8933
LOADING
/CARRIAGE
MOTOR
M1 CXC4440
SPINDLE MOTOR
1
2
3
2
C
5
8
A
6
C-b
B
C
D
E
F
C-a
DEH-P6700MP/XM/EW
8
25
C
S
S
ras
!
C-a C-b
C
C-b
26
1
2
S
C
T
F
B
2
3.3V REGULATOR
C CD CORE UNIT(S10.1)
SPINDLE SERVO LINE
CARRIAGE SERVO LINE
TRACKING SERVO LINE
FOCUS SERVO LINE
SIGNAL LINE
The underlined indicates the switch position.
SWITCHES:
CD CORE UNIT(S10.1)
S901:HOME SWITCH..........ON-OFF
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
1
3
3
4
A
D
E
F
1
2
DEH-P6700MP/XM/EW
4
TYPE_A/D
MICRO COMPUTER
2
5
3
6
SRAMLEVEL0
SRAMLEVEL1
SRAMLEVEL2
C-a C-b
3V REGULATOR
6
&
^
6
CN721
A
5
7
4
7
8
A
B
C
D
E
F
5
6
C-b
DEH-P6700MP/XM/EW
8
27
1
2
- Waveforms
A
1 DSCSNS
2 8SNS
3 12SNS
4 LOEJ
B
500ms/div 1 DSCSNS
5 CLCONT
4 LOEJ
6 VD
5V/div
5V/div
5V/div
10V/div
500ms/div 1 DSCSNS
2 8SNS
3 12SNS
4 LOEJ
5V/div
5V/div
5V/div
5V/div
8 cm CD Loading operation
Ref.:
GND
Ref.:
GND
Ref.:
GND
Mode:
Normal
Mode:
Normal
Mode:
Normal
1V/div
2s/div
500mV/div
500mV/div
7 SIN
8 CIN
9 TIN
7 SIN
8 CIN
9 TIN
1V/div
1s/div
500mV/div
500mV/div
500ms/div
1V/div
2s/div
500mV/div
500mV/div
12 cm CD-DA setup operation after loading
12 cm CD-ROM(1 session) setup operation
after loading
12 cm CD-ROM(3 sessions) setup operation
after loading
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
200mV/div 500ms/div @ TE
2V/div
# FE
2V/div
500mV/div 200ms/div # FE
500mV/div
0 FIN
@ TE
9 TIN
12 cm CD-DA Source On setup operation
Source On setup operation
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
# FE
0 FIN
@ TE
9 TIN
E
Note : 1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage REFO1(1.65V)
0 FIN
! RFOK
7 SIN
D
4
7 SIN
8 CIN
9 TIN
C
5V/div
5V/div
5V/div
5V/div
3
500mV/div 20ms/div
500mV/div
500mV/div
500mV/div
$ MDX
7 SIN
500mV/div 20ms/div
500mV/div
500mV/div
500mV/div
CD-DA Play operation
1V/div
50ms/div
200mV/div
$ MDX
7 SIN
2V/div
1V/div
5µs/div
CD-ROM play operation(Regular track Jump)
Spindle waveform during play operation
Spindle waveform during play operation
(Wider)
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
F
28
DEH-P6700MP/XM/EW
1
2
3
4
5
0 FIN
# FE
6
500mV/div 200ms/div @ TE
500mV/div
% RFAGC
7
500mV/div 2ms/div
500mV/div
% RFAGC
@ TE
9 TIN
8
1V/div
500µs/div
500mV/div
500mV/div
Focus Search waveform
Track Open waveform
1 Track Jump waveform
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
TEST
Mode:
TEST
Mode:
TEST
A
B
% RFAGC
@ TE
9 TIN
1V/div
500µs/div % RFAGC
500mV/div
@ TE
500mV/div
9 TIN
1V/div
1ms/div
500mV/div
500mV/div
% RFAGC
@ TE
9 TIN
1V/div
2ms/div
500mV/div
500mV/div
4 Tracks Jump waveform
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
TEST
Mode:
TEST
Mode:
TEST
C
% RFAGC
@ TE
8 CIN
7 SIN
200ms/div ^ LOUT
1V/div
1V/div
& ROUT
500mV/div
2V/div
Search operation(Outter to Inner)
1V/div
1V/div
200µs/div 1 DSCSNS
2 8SNS
3 12SNS
4 LOEJ
Analog audio waveform
5V/div
5V/div
5V/div
5V/div
500ms/div
12 cm CD Eject operation
D
Ref.:
REFO
Ref.:
AGND
Ref.:
GND
Mode:
Normal
Mode:
Normal
Mode:
Normal
1 DSCSNS 5V/div
5 CLCONT 5V/div
4 LOEJ
5V/div
500ms/div 1 DSCSNS
2 8SNS
3 12SNS
4 LOEJ
5V/div
5V/div
5V/div
5V/div
500ms/div 7 SIN
8 CIN
9 TIN
1V/div
500ms/div
500mV/div
500mV/div
E
CD-DA >> CD-ROM mode change(Band key)
Ref.:
GND
Ref.:
GND
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
F
DEH-P6700MP/XM/EW
5
6
7
8
29
1
7 SIN
8 CIN
9 TIN
A
2
3
1V/div
500ms/div % RFAGC
500mV/div
9 TIN
500mV/div
@ TE
0 FIN
1V/div
1V/div
1V/div
1V/div
CD-ROM >> CD-DA mode change(Band key)
Black dot(800µm) during play
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
4
500µs/div
B
C
D
E
F
30
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
A
B
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
31
1
2
3
4
4. PCB CONNECTION DIAGRAM
4.1 TUNER AMP UNIT
A
NOTE FOR PCB DIAGRAMS
1.The parts mounted on this PCB
include all necessary parts for
several destination.
For further information for
respective destinations, be sure
to check with the schematic diagram.
2.Viewpoint of PCB diagrams
A
TUNER AMP UNIT
150
1
140
Capacitor
Connector
CORD ASSY
IP-BUS
16
14
12
10
8
6
4
2
15
13
11
9
7
5
3
1
2
SIDE A
4
3
2
130
7
B
11 10 9
Chip Part
P.C.Board
1
3
6
5
8
SIDE B
120
110
100
C
90
80
70
D
60
50
40
E
C
CN901
30
20
10
F
DSENS
Y
A
32
0
X
10
20
30
40
50
60
DEH-P6700MP/XM/EW
1
2
3
4
70
5
6
7
8
SIDE A
SUBWOOFER OUTPUT
NON FADING OUTPUT
FRONT OUTPUT
4
2
3
1
3
1
4
2
7
5
8
6
ANTENNA
2
FM/AM TUNER UNIT
1
D
CN1950
FRONT
70
80
90
100
110
120
130
140
150
160
170
A
1
A
A
2
3
4
TUNER AMP UNIT
1
B
C
D
E
F
A
34
170
160
150
140
130
120
110
100
DEH-P6700MP/XM/EW
1
2
3
4
90
5
6
7
8
A
SIDE B
150
1
140
1
130
B
120
110
100
C
90
80
70
D
60
50
40
E
30
20
10
F
Y
90
80
70
60
50
40
30
20
10
X
A
0
DEH-P6700MP/XM/EW
5
6
7
8
35
B
36
1
2
X
0
Y
20
30
50
1
60
2
70
3
80
100
C
3
90
4
5
110
6
120
130
BAND
B
40
SOURCE
ILLUMINATION
140
AUDIO
LEFT
FUNCTION
150
SW
DOWN
160
RIGHT
2
10
DISPLAY
VOLUME
EQ
E
10
TA
A
20
30
UP
B
40
1
3
4
4.2 KEYBOARD UNIT
KEYBOARD UNIT
SIDE A
D
F
DEH-P6700MP/XM/EW
4
5
B
6
7
8
SIDE B
KEYBOARD UNIT
A
160
150
140
D
130
CN1951
B
120
110
100
C
90
80
70
D
60
50
40
E
30
20
10
Y
F
40
30
20
X
10
0
B
DEH-P6700MP/XM/EW
5
6
7
8
37
1
2
3
4
4.3 CD CORE UNIT(S10.1)
C
CD CORE UNIT(S10.1)
SIDE A
A
M2
LOADING
/CARRIAGE
MOTOR
B
M1
SPINDLE
MOTOR
A
C
CN721
D
HOME
E
FE
REFO1
F
C
38
DEH-P6700MP/XM/EW
1
2
3
4
5
C
6
7
CD CORE UNIT(S10.1)
8
SIDE B
A
8EJ
12EJ
DSCSNS
B
C
D
E
F
C
DEH-P6700MP/XM/EW
5
6
7
8
39
1
2
3
4
4.4 PANEL UNIT
A
D
SIDE A
PANEL UNIT
D
SIDE B
PANEL UNIT
B
B
A
CN1
CN831
EJECT
C
D
E
F
D
40
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
5. ELECTRICAL PARTS LIST
NOTE:
• Parts whose parts numbers are omitted are subject to being not supplied.
• The part numbers shown below indicate chip components.
Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
• The > mark found on some component parts indicatesthe importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Meaning of the figures and others in the parentheses in the parts list.
Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding
PC board.
IC 301 (A, 91, 111) IC NJM2068V
Circuit Symbol and No.
Part No.
DEH-P6700MP/XM/EW
Tuner Amp Unit : CWM9790
Keyboard Unit : NSP
Panel Unit : CWM9781
CD Core Unit(S10.1) : CWX3096
A
Unit Number:CWM9790
Unit Name:Tuner Amp Unit
A
B
Part No.
Q 902
Q 931
(B,31,69) Transistor
(A,60,117) Transistor
UMD2N
UMX1N
Q
D
D
D
D
951
391
392
441
751
(A,17,86) Diode
(A,127,116) Diode
(A,155,41) Diode
(A,16,65) Diode
2SA1576
HZS7L(B2)
DAN202U
UDZS5R6(B)
HZS9L(A1)
D
D
D
D
D
801
802
803
881
882
(B,120,29) Diode
(B,108,29) Diode
(B,66,27) Diode
(A,31,15) Diode
(A,28,25) Diode
UMZ6R8EN
UMZ6R8EN
UDZS10(B)
HZS9L(B1)
MPG06G-6415G50
D
D
D
D
D
901
902
921
931
932
(A,29,79) Diode
(A,32,75) Diode
(A,145,24) Diode
(A,54,115) Diode
(A,60,113) Diode
HZS6L(B1)
MPG06G-6415G50
MPG06G-6415G50
HZU7L(C3)
HZU7L(A1)
D
D
D
D
D
951
971
972
981
982
(A,60,108) Diode
(A,122,129) Diode
(A,124,122) Diode
(A,69,113) Diode
(A,72,111) Diode
DAN202U
MPG06G-6415G50
MPG06G-6415G50
MPG06G-6415G50
MPG06G-6415G50
ZNR401
L 101
L 211
L 401
L 402
(B,158,113) Surge Protector
(A,77,65) Inductor
(A,60,87) Inductor
(A,155,97) Ferri-Inductor
(A,151,89) Inductor
CSA30-201N
LAU2R2K
LAU2R2K
LAU4R7K
LAU1R0K
L
L
L
L
L
(A,151,67) Inductor
(A,101,67) Inductor
(A,51,54) Inductor
(A,71,29) Inductor
(A,64,104) Inductor
LAU1R0K
LAU2R2K
LAU2R2K
LAU2R2K
LAU2R2K
C
MISCELLANEOUS
IC 101
IC 251
IC 301
IC 431
IC 601
(A,58,64) IC
(A,86,88) IC
(A,104,139) IC
(A,147,43) IC
(A,96,46) IC
HA12240FP
PML009A
PAL007A
NJM4558MD
PE5468A
IC 651
IC 911
IC 921
Q 101
Q 102
(A,54,73) IC
(A,5,120) IC
(B,159,27) IC
BD4834G
NJM2388F84
NJM2391DL1-33
2SA1576
DTC124EU
Q
Q
Q
Q
Q
301
351
352
371
391
(A,128,122)
(A,141,128)
(A,157,127)
(B,137,115)
(A,118,111)
DTC124EU
UMH3N
UMH3N
UMD2N
2SC4081
Q
Q
Q
Q
Q
421
422
751
753
761
(A,6,70) Transistor
UMH1N
UMH1N
2SD2396
UMD2N
2SA1577
Q
Q
Q
Q
Q
762
851
852
861
862
(B,22,33)
(B,65,35)
(B,63,30)
(A,45,16)
(A,41,16)
Transistor
Transistor
Transistor
Transistor
Transistor
DTC114EU
2SA1576
DTC114EU
2SA1576
DTC114EU
2SD2318F5
UMD3N
2SD2396
Q 881
Q 882
Q 901
Transistor
Transistor
Transistor
Transistor
Transistor
E
403
601
701
851
951
L 981
X 601
S 831
>FU351
SP601
(A,25,10) Switch(DSENS)
(B,127,134) Fuse 3A
(A,135,25) Buzzer
Y 401
>
Fuse 10A
(A,32,107) Choke Coil 600µH CTH1291
(A,100,61) Radiator 12.58291MHz CSS1402
CSN1039
CEK1286
CPV1062
6
F
(A,162,101) FM/AM Tuner Unit CWE1645
CEK1208
RESISTORS
DEH-P6700MP/XM/EW
5
D
7
8
41
1
A
B
C
D
E
F
2
3
Part No.
4
Part No.
R
R
R
R
R
101
102
103
104
105
(B,36,134)
(B,36,135)
(B,37,124)
(B,36,137)
(B,27,135)
RS1/16S150J
RS1/16S470J
RS1/16S101J
RS1/16S101J
RS1/16S181J
R
R
R
R
R
441
601
603
604
605
(A,155,45)
(B,134,38)
(B,97,54)
(A,112,65)
(B,102,57)
RS1/16S681J
RS1/16S102J
RS1/16S104J
RS1/16S104J
RS1/16S102J
R
R
R
R
R
106
107
108
109
110
(B,31,121)
(B,25,135)
(B,29,121)
(B,26,122)
(B,27,121)
RS1/16S181J
RS1/16S223J
RS1/16S223J
RS1/16S102J
RS1/16S102J
R
R
R
R
R
606
607
610
611
612
(B,91,53)
(A,72,60)
(A,83,33)
(A,83,34)
(A,80,39)
RS1/16S473J
RS1/16S104J
RS1/16S103J
RS1/16S473J
RS1/16S104J
R
R
R
R
R
111
113
114
211
251
(B,34,121)
(A,42,83)
(A,43,80)
(A,104,75)
(A,79,79)
RS1/16S222J
RS1/16S332J
RS1/16S562J
RAB4C102J
RS1/16S102J
R
R
R
R
R
613
616
617
620
621
(A,103,33)
(B,115,45)
(A,116,43)
(B,107,44)
(B,119,45)
RS1/16S103J
RS1/16S472J
RS1/16S102J
RS1/16S104J
RS1/16S104J
R
R
R
R
R
252
271
272
273
274
(A,81,96)
(A,110,96)
(A,106,96)
(A,111,96)
(A,108,96)
RS1/16S102J
RS1/16S101J
RS1/16S101J
RS1/16S101J
RS1/16S101J
R
R
R
R
R
622
623
624
625
626
(B,121,45)
(B,124,45)
(A,111,49)
(A,111,51)
(A,111,52)
RS1/16S104J
RS1/16S104J
RS1/16S681J
RS1/16S681J
RS1/16S681J
R
R
R
R
R
275
276
301
302
303
(A,113,96)
(A,116,96)
(B,118,125)
(A,129,132)
(A,129,134)
RS1/16S101J
RS1/16S101J
RS1/16S153J
RS1/16S103J
RS1/16S103J
R
R
R
R
R
627
640
651
652
671
(A,96,33)
(A,109,34)
(A,60,72)
(A,59,73)
(B,7,134)
RAB4C471J
RS1/16S0R0J
RS1/16S183J
RS1/16S102J
RS1/16S102J
R
R
R
R
R
304
331
332
333
334
(A,127,135)
(A,106,110)
(A,102,110)
(A,109,110)
(A,104,110)
RS1/16S331J
RSK1/16S471J
RSK1/16S471J
RSK1/16S471J
RSK1/16S471J
R
R
R
R
R
672
701
702
703
704
(B,5,134)
(A,61,44)
(A,61,35)
(A,61,36)
(A,61,47)
RS1/16S102J
RS1/16S221J
RS1/16S221J
RS1/16S102J
RS1/16S102J
R
R
R
R
R
351
352
353
354
355
(B,131,127)
(B,141,129)
(B,141,123)
(B,158,127)
(B,129,130)
RS1/16S821J
RS1/16S821J
RS1/16S821J
RS1/16S821J
RS1/16S223J
R
R
R
R
R
705
706
707
708
712
(A,61,46)
(A,61,38)
(A,44,45)
(A,61,41)
(B,49,51)
RS1/16S221J
RS1/16S221J
RS1/16S221J
RAB4C682J
RS1/16S473J
R
R
R
R
R
356
357
368
371
372
(B,140,129)
(B,143,123)
(B,156,126)
(B,142,109)
(A,131,115)
RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S102J
RS1/16S0R0J
R
R
R
R
R
731
732
733
734
751
(A,67,52)
(A,58,54)
(A,67,56)
(A,61,56)
(A,16,57)
RS1/16S6800D
RS1/16S6800D
RS1/16S0R0J
RS1/16S0R0J
RD1/4PU102J
R
R
R
R
R
391
392
393
401
402
(A,121,111)
(A,118,108)
(A,130,130)
(B,158,64)
(B,157,81)
RS1/16S104J
RS1/16S104J
RS1/16S222J
RS1/16S681J
RS1/16S681J
R
R
R
R
R
761
762
801
802
803
(B,30,36)
(B,25,30)
(A,127,27)
(A,125,27)
(A,78,27)
RS1/16S103J
RS1/16S152J
RS1/16S222J
RS1/16S222J
RS1/16S222J
R
R
R
R
R
403
404
405
407
408
(B,157,83)
(B,157,86)
(B,157,88)
(B,157,90)
(B,158,69)
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S0R0J
R
R
R
R
R
804
805
835
836
838
(A,76,27)
(A,74,27)
(A,105,29)
(A,100,26)
(A,103,29)
RS1/16S222J
RS1/16S222J
RS1/16S222J
RS1/16S104J
RS1/16S222J
R
R
R
R
R
421
422
431
432
433
(A,145,59)
(B,157,79)
(B,153,43)
(B,153,41)
(A,153,44)
RAB4C223J
RS1/16S681J
RS1/16S103J
RS1/16S103J
RS1/16S103J
R
R
R
R
R
839
841
843
845
851
(A,100,28)
(A,86,27)
(A,120,27)
(A,122,27)
(B,61,34)
RS1/16S104J
RS1/16S222J
RS1/16S222J
RS1/16S222J
RS1/16S473J
R
R
R
R
R
434
435
436
437
438
(A,153,42)
(B,154,47)
(B,152,45)
(B,146,47)
(A,143,43)
RS1/16S103J
RS1/16S103J
RS1/16S103J
RS1/16S103J
RS1/16S103J
R
R
R
R
R
852
853
861
862
863
(B,60,31)
(B,60,26)
(A,49,16)
(A,45,12)
(A,41,12)
RS1/16S472J
RS1/16S222J
RD1/4PU391J
RS1/16S473J
RS1/16S103J
42
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
Part No.
R
R
R
R
R
881
882
901
902
911
(A,26,20)
(B,18,27)
(B,11,77)
(B,14,75)
(B,6,110)
RD1/4PU222J
RS1/16S222J
RS1/16S333J
RS1/16S103J
RS1/16S103J
R
R
R
R
R
912
931
932
933
934
(A,16,98)
(A,57,115)
(A,56,115)
(A,64,115)
(A,64,112)
RS1/16S102J
RS1/16S104J
RS1/16S473J
RS1/16S103J
RS1/16S473J
R
R
R
R
R
935
951
952
953
954
(A,62,115)
(A,54,103)
(A,53,107)
(A,57,109)
(A,58,103)
RS1/16S472J
RS1/16S102J
RS1/16S472J
RS1/16S472J
RS1/16S153J
R 981
(A,67,105)
RD1/4PU102J
CAPACITORS
C
C
C
C
C
101
103
104
105
106
(B,29,137)
(A,59,69)
(A,61,69)
(B,38,127)
(B,31,137)
CKSRYB104K25
CKSRYB102K50
CKSRYB102K50
CCSRCH101J50
CCSRCH101J50
C
C
C
C
C
107
108
201
202
203
(A,51,64)
(B,45,65)
(B,121,79)
(B,121,75)
(A,66,79) 1µF/50V
CKSRYB472K50
CCSRCH680J50
CKSRYB105K10
CKSRYB105K10
CCH1510
C
C
C
C
C
204
205
206
207
208
(A,67,92) 1µF/50V
(A,73,85)
(A,73,91)
(A,73,79)
(A,72,97)
CCH1510
CEJQ2R2M50
CEJQ2R2M50
CEJQ2R2M50
CEJQ2R2M50
C
C
C
C
C
211
212
213
251
252
(A,66,86) 47µF/10V
(B,72,89)
(A,103,89)
(A,76,74)
(A,81,100)
CCH1558
CKSRYB104K25
CEJQ100M16
CEJQNP4R7M16
CEJQNP4R7M16
C
C
C
C
C
253
254
255
256
257
(A,82,74)
(A,87,100)
(A,89,74)
(A,95,100)
(A,95,73)
CEJQNP4R7M16
CEJQNP4R7M16
CEJQNP4R7M16
CEJQNP4R7M16
CEJQNP4R7M16
C
C
C
C
C
258
259
261
262
301
(A,99,95)
(A,76,83)
(A,74,69)
(A,68,98)
(A,48,124) 3300µF/16V
CEJQNP4R7M16
CKSRYB474K10
CCSQCH152J50
CCSQCH152J50
CCH1486
C
C
C
C
C
302
303
304
305
306
(B,105,144)
(A,118,121)
(A,112,130)
(A,117,115)
(A,109,130)
CKSQYB105K16
CEHAR100M16
CKSQYB225K10
CEHAR330M10
CKSQYB225K10
C
C
C
C
C
331
332
333
334
335
(A,108,102)
(A,103,102)
(A,111,102)
(A,105,102)
(A,108,106)
CKSRYB474K10
CKSRYB474K10
CKSRYB474K10
CKSRYB474K10
CKSQYB474K16
8
Part No.
C
C
C
C
C
336
337
338
351
352
(A,102,106)
(A,111,106)
(A,105,106)
(A,134,127)
(A,134,120)
CKSQYB474K16
CKSQYB474K16
CKSQYB474K16
CEJQ100M16
CEJQ100M16
C
C
C
C
C
353
354
361
401
402
(A,141,120)
(A,144,113)
(B,160,139)
(B,165,59)
(A,153,60)
CEJQ100M16
CEJQ100M16
CKSRYB104K25
CKSRYB103K50
CEJQ470M6R3
C
C
C
C
C
403
404
405
407
411
(B,165,64)
(B,165,96)
(A,148,99)
(B,158,60)
(A,149,78)
CKSRYB103K50
CKSRYB103K50
CEJQ101M16
CKSYB475K10
CCSRCH101J50
C
C
C
C
C
412
431
432
433
434
(B,140,65)
(B,156,43)
(B,156,41)
(A,153,45)
(A,153,41)
CCSRCH101J50
CKSRYB474K10
CKSRYB474K10
CCSRCH470J50
CCSRCH470J50
C
C
C
C
C
435
436
437
438
441
(B,157,47)
(B,156,45)
(B,146,46)
(A,141,43)
(A,143,47)
CKSRYB474K10
CKSRYB474K10
CCSRCH470J50
CCSRCH470J50
CKSRYB105K10
C
C
C
C
C
442
602
603
604
605
(A,153,39)
(B,92,67)
(A,90,65)
(B,101,58)
(B,97,58)
CKSRYB105K10
CKSRYB105K10
CEJQ4R7M35
CCSRCH200J50
CCSRCH200J50
C
C
C
C
C
606
607
609
611
651
(B,91,55)
(A,81,45)
(A,114,58)
(B,85,52)
(A,64,72)
CKSRYB105K10
CKSRYB104K25
CCSRCH470J50
CCSRCH680J50
CKSRYB105K10
C
C
C
C
C
712
731
732
751
752
(B,38,30)
(A,66,54)
(A,62,54)
(B,21,63)
(B,15,54)
CCSRCH101J50
CCSQCH222J50
CCSQCH222J50
CKSRYB224K10
CKSRYB102K50
C
C
C
C
C
753
761
762
801
802
(A,15,51)
(B,28,41)
(A,29,44)
(B,87,22)
(B,89,22)
CEJQ101M16
CKSRYB473K50
CEAT471M16
CCSRCH220J50
CCSRCH220J50
C
C
C
C
C
803
804
805
881
882
(B,91,22)
(B,93,22)
(B,114,31)
(B,28,17)
(A,17,31)
CCSRCH220J50
CCSRCH220J50
CCSRCH220J50
CKSRYB104K25
CEJQ1R0M50
C
C
C
C
C
901
902
903
904
911
(A,16,70)
(B,21,68)
(B,34,81)
(A,25,70) 470µF/16V
(A,17,80)
CEJQ221M6R3
CKSRYB103K50
CKSRYB472K50
CCH1331
CEJQ221M10
C
C
C
C
C
912
913
921
922
923
(B,9,116)
(A,14,118)
(A,150,32)
(B,155,32)
(B,152,21)
CKSRYB103K50
CEJQ101M16
CEJQ220M10
CKSRYB103K50
CKSYB475K10
6
B
C
DEH-P6700MP/XM/EW
5
A
7
8
D
E
F
43
1
2
C 931
C 981
A
(A,62,112)
(B,58,122)
3
Part No.
CKSRYB104K25
CKSRYB104K25
B
Unit Number:
Unit Name:Keyboard Unit
MISCELLANEOUS
C
D
E
RS1/16S104J
RS1/16S102J
R
R
R
R
R
7
8
10
11
12
(B,119,14)
(B,116,14)
(B,43,17)
(B,35,36)
(B,123,4)
RS1/16S102J
RS1/16S102J
RS1/16S121J
RS1/16S2R2J
RS1/16S104J
R
R
R
R
R
13
14
15
16
17
(B,116,4)
(B,119,4)
(B,28,26)
(B,27,30)
(B,42,22)
RS1/16S104J
RS1/16S104J
RS1/16S121J
RS1/16S121J
RS1/16S101J
R
R
R
R
R
18
19
21
22
23
(B,115,7)
(B,118,7)
(B,43,25)
(B,36,18)
(B,38,18)
RS1/16S104J
RS1/16S104J
RS1/16S101J
RS1/16S680J
RS1/16S680J
R
R
R
R
R
24
25
26
27
28
(B,135,14)
(B,18,11)
(B,137,14)
(B,13,37)
(B,11,35)
RS1/16S104J
RS1/16S101J
RS1/16S222J
RS1/16S101J
RS1/16S101J
R
R
R
R
R
29
30
31
32
33
(B,126,4)
(B,12,35)
(B,11,32)
(B,40,22)
(B,38,22)
RS1/16S102J
RS1/16S101J
RS1/16S101J
RS1/16S101J
RS1/16S121J
R
R
R
R
R
34
35
36
37
38
(B,28,30)
(B,43,29)
(B,155,29)
(B,155,32)
(B,18,8)
RS1/16S121J
RS1/16S101J
RS1/16S104J
RS1/16S222J
RS1/16S101J
R
R
R
R
R
39
40
41
42
43
(B,40,25)
(B,41,29)
(B,127,4)
(B,14,11)
(B,12,11)
RS1/16S680J
RS1/16S680J
RS1/16S102J
RS1/16S121J
RS1/16S121J
R
R
R
R
R
44
45
46
47
48
(B,18,37)
(B,11,11)
(B,9,11)
(B,19,35)
(B,51,9)
RS1/16S101J
RS1/16S680J
RS1/16S680J
RS1/16S101J
RS1/16S101J
R
R
R
R
R
49
50
51
52
53
(B,52,9)
(B,151,18)
(B,148,14)
(B,47,9)
(B,129,4)
RS1/16S101J
RS1/16S104J
RS1/16S222J
RS1/16S101J
RS1/16S102J
R
R
R
R
R
54
55
56
57
58
(B,149,36)
(B,158,9)
(B,158,12)
(B,120,33)
(B,151,36)
RS1/16S101J
RS1/16S104J
RS1/16S222J
RS1/16S101J
RS1/16S121J
59
60
61
62
63
(B,153,36)
(B,131,7)
(B,152,32)
(B,150,22)
(B,114,36)
RS1/16S121J
RS1/16S102J
RS1/16S680J
RS1/16S680J
RS1/16S121J
(B,116,37)
(B,119,33)
(B,119,37)
RS1/16S121J
RS1/16S680J
RS1/16S680J
PD6340A
MB88347PFV-G-BND
TSOP4840SB1
UMX1N
UMX1N
Q
Q
Q
Q
Q
3
4
5
6
7
UMX1N
UMX1N
UMX1N
UMX1N
UMX1N
Q
Q
Q
Q
Q
8
9
10
11
12
(B,49,9) Transistor
UMX1N
UMX1N
UMX1N
UMX1N
UMX1N
Q
Q
D
D
D
13
14
1
2
3
(B,77,13) Diode
(B,70,13) Diode
(A,30,23) Chip LED
UMX1N
UMX1N
DAN202U
DAP202U
NSCM315CT
D
D
D
D
X
4
5
6
7
1
(A,39,22) Chip LED
(A,84,5) Chip LED
(A,129,22) Chip LED
(A,152,23) Chip LED
S
S
S
S
S
1
2
3
4
5
(A,38,7)
(A,52,7)
(A,64,7)
(A,76,7)
S
S
S
S
S
6
7
8
9
10
(A,103,7) Push Switch
CSG1173
CSG1173
CSG1173
CSG1173
CSG1173
S
S
S
S
S
11
12
13
14
15
(A,152,15) Switch
(A,152,32) Switch
(A,143,23) Switch
CSG1173
CSG1173
CSG1110
CSG1110
CSG1110
S
S
S
S
S
16
17
18
19
20
(A,160,23) Switch
CSG1110
CSG1173
CSG1173
CSG1173
CSG1173
(A,84,24) LCD
CAW1865
R
R
R
R
R
RS1/16S103J
RS1/16S222J
RS1/16S222J
R 64
R 65
R 66
NSCM315CT
NSCM315CT
NSCM315CT
NSCM315CT
(B,71,18) Ceramic Resonator 4.97MHz CSS1573
(A,15,23) Encoder(VOLUME) XSD7001
Push Switch
Push Switch
Push Switch
Push Switch
CSG1173
CSG1173
CSG1173
CSG1173
RESISTORS
R 2
R 3
R 4
44
(B,100,17)
(B,115,26)
(B,117,26)
Part No.
(B,119,26)
(B,117,14)
(B,85,20) IC
(B,125,13) IC
(A,30,37) IC
LCD1
F
R 5
R 6
IC 1
IC 2
IC 3
Q 1
Q 2
B
4
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
Part No.
R 67
R 68
(B,154,36)
(B,154,9)
RS1/16S101J
RS1/16S104J
R
R
R
R
R
69
70
71
72
73
(B,154,12)
(B,115,33)
(B,134,6)
(B,159,34)
(B,158,32)
RS1/16S222J
RS1/16S101J
RS1/16S102J
RS1/16S101J
RS1/16S101J
R
R
R
R
R
74
75
76
77
78
(B,160,32)
(B,156,32)
(B,158,26)
(B,149,6)
(B,157,27)
RS1/16S101J
RS1/16S101J
RS1/16S101J
RS1/16S104J
RS1/16S101J
R
R
R
R
R
79
80
81
82
83
(B,150,11)
(B,136,6)
(B,155,6)
(B,156,16)
(B,125,6)
RS1/16S222J
RS1/16S102J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
(B,102,8)
(B,103,8)
RS1/16S471J
RS1/16S471J
CAPACITORS
C 1970
R 84
R 85
(B,24,35)
(B,65,18)
(B,132,14)
(A,28,14)
(A,29,19)
CKSQYB475K6R3
CKSRYB105K10
CKSQYB225K10
CKSRYF104Z25
CKSRYF104Z25
C
C
C
C
C
10
11
12
13
14
(B,121,4)
(B,115,4)
(B,118,4)
(B,113,4)
(B,117,7)
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
C
C
C
C
C
16
18
19
20
21
(B,157,21)
(B,124,4)
(A,30,28)
(A,30,26)
(B,150,15)
CKSQYB225K10
CKSRYB104K25
CKSRYF104Z25
CKSRYF104Z25
CKSQYB225K10
C
C
C
C
C
22
23
24
25
26
(A,79,6)
(A,81,6)
(B,156,12)
(A,136,25)
(B,152,11)
CKSRYF104Z25
CKSRYF104Z25
CKSQYB225K10
CKSRYF104Z25
CKSQYB225K10
C
C
C
C
27
28
29
30
(A,136,22)
(B,148,11)
(A,155,24)
(A,149,23)
CKSRYF104Z25
CKSQYB225K10
CKSRYF104Z25
CKSRYF104Z25
D 1970
S 1970
(A,26,5) LED
CL220PGC
IC 201
IC 203
IC 301
IC 701
IC 703
(A,39,24)
(B,45,78)
(A,49,88)
(A,48,51)
(A,30,44)
IC
IC
IC
IC
IC
UPD63763GJ
NJM2885DL1-33
BA5835FP
PE5454A
S-812C33AUA-C2N
Q
Q
L
L
L
101
701
203
207
209
(A,20,22)
(B,62,59)
(A,53,32)
(A,53,31)
(A,26,20)
Transistor
Transistor
Inductor
Inductor
Inductor
2SA1577
UN2111
CTF1389
CTF1389
CTF1389
L
X
X
S
S
703
201
701
901
903
(A,64,49) Inductor
S 904
S 905
B
CTF1389
(A,51,35) Ceramic Resonator 16.934MHz CSS1603
(A,59,53) Ceramic Resonator 4.00MHz CSS1652
(A,15,43) Switch(HOME)
CSN1067
(B,53,100) Switch(DSCSNS) CSN1068
(B,35,108) Switch(12EJ)
(B,48,109) Switch(8EJ)
C
CSN1067
CSN1067
RESISTORS
R
R
R
R
R
101
102
103
201
202
(A,22,24)
(A,22,26)
(A,25,25)
(A,53,16)
(A,55,21)
RS1/10SR2R4J
RS1/10SR2R4J
RS1/10SR2R7J
RS1/16SS102J
RS1/16SS333J
R
R
R
R
R
221
222
225
226
227
(B,31,18)
(B,26,18)
(A,27,8)
(A,27,7)
(B,33,10)
RS1/16SS103J
RS1/16SS103J
RS1/16SS103J
RS1/16SS393J
RS1/16SS562J
R
R
R
R
R
228
229
232
241
243
(B,36,8)
(B,34,8)
(B,35,10)
(B,42,28)
(B,44,28)
RS1/16SS122J
RS1/16SS472J
RS1/16SS122J
RS1/16SS333J
RS1/16SS333J
R
R
R
R
R
245
301
302
304
305
(A,39,38)
(A,48,78)
(A,42,78)
(A,50,78)
(A,42,77)
RS1/16SS333J
RS1/16SS183J
RS1/16SS822J
RS1/16SS183J
RS1/16SS822J
R
R
R
R
R
307
308
309
310
601
(A,36,85)
(A,32,83)
(A,38,89)
(A,35,88)
(B,43,59)
RS1/16SS183J
RS1/16SS183J
RS1/16SS183J
RS1/16SS183J
RS1/16S101J
R
R
R
R
R
602
606
607
608
705
(B,41,62)
(B,44,67)
(B,43,56)
(B,36,67)
(B,50,59)
RS1/16S101J
RS1/16S0R0J
RS1/16SS0R0J
RS1/16SS0R0J
RS1/16SS221J
D
E
(A,5,78) Push Switch(EJECT) CSG1174
RESISTORS
R 1970
R 1971
A
MISCELLANEOUS
4
5
7
8
9
MISCELLANEOUS
CKSRYB104K16
Unit Name:CD Core Unit(S10.1)
C
C
C
C
C
Unit Name:Panel Unit
(B,39,64)
Part No.
C
Unit Number:CWX3096
CAPACITORS
D
Unit Number:CWM9781
8
(B,35,18)
(B,35,16)
RS1/16S101J
RS1/16S101J
DEH-P6700MP/XM/EW
5
6
7
8
F
45
1
A
B
2
3
Part No.
R
R
R
R
R
706
707
708
710
711
(B,57,61)
(A,62,47)
(B,50,57)
(A,28,77)
(B,44,53)
RS1/16SS221J
RS1/16SS473J
RS1/16SS221J
RS1/16SS102J
RS1/16SS221J
R
R
R
R
R
714
716
719
720
724
(B,51,53)
(A,63,56)
(B,49,45)
(B,46,52)
(A,62,42)
RS1/16SS473J
RS1/16SS472J
RS1/16SS221J
RS1/16SS471J
RS1/16S473J
R
R
R
R
R
725
726
727
729
730
(B,57,43)
(A,52,41)
(B,50,54)
(A,57,40)
(A,65,41)
RS1/16SS222J
RS1/16SS103J
RS1/16SS473J
RS1/16SS223J
RS1/16SS473J
R
R
R
R
R
731
737
740
742
746
(A,53,41)
(A,41,42)
(A,35,46)
(A,50,41)
(B,60,56)
RS1/16SS104J
RS1/16SS104J
RS1/16SS473J
RS1/16SS104J
RS1/16SS104J
R
R
R
R
R
750
754
755
765
769
(A,39,59)
(B,48,60)
(A,43,61)
(B,51,40)
(B,48,40)
RS1/16SS473J
RS1/16SS102J
RS1/16SS102J
RAB4CQ221J
RAB4CQ221J
R
R
R
R
R
773
777
778
779
901
(B,39,37)
(B,48,51)
(B,48,52)
(B,45,54)
(B,52,65)
RAB4CQ221J
RS1/16SS221J
RS1/16SS221J
RS1/16SS221J
RAB4CQ221J
R
R
R
R
R
905
906
908
910
911
(B,54,60)
(B,56,68)
(B,45,69)
(B,44,69)
(B,40,73)
RS1/16SS221J
RS1/16SS221J
RS1/16SS0R0J
RS1/16SS0R0J
RS1/16SS102J
C
D
E
CAPACITORS
103
105
108
110
201
(B,14,8) 100µF/16V
(A,19,15)
(B,39,16)
(A,18,6)
(A,51,14)
CCH1504
CKSSYB104K10
CKSSYB104K10
CKSSYB104K10
CKSSYB102K50
C
C
C
C
C
202
203
204
205
208
(B,50,17)
(A,55,23)
(B,28,22)
(A,53,25)
(B,44,25)
CKSSYB104K10
CKSSYB104K10
CEVW220M6R3
CKSSYB104K10
CKSSYB104K10
C
C
C
C
C
209
212
216
217
218
(A,54,29)
(A,45,37)
(A,25,8)
(A,28,12)
(A,25,7)
CKSSYB104K10
CKSRYB105K10
CKSSYB332K50
CKSSYB104K10
CKSSYB473K10
C
C
C
C
C
219
220
221
222
223
(A,34,7)
(A,33,11)
(B,35,6)
(B,35,8)
(B,33,8)
CKSSYB104K10
CKSSYB182K50
CKSSYB104K10
CCSSCH560J50
CCSSCH4R0C50
C 224
C 225
C 226
(B,40,16)
(B,45,14)
(B,43,12)
CKSSYB104K10
CKSSYB103K16
CCSSCH680J50
Part No.
C 227
C 228
(A,45,10)
(A,49,9)
CCSSCH470J50
CKSSYB103K16
C
C
C
C
C
234
237
239
242
243
(B,36,81)
(B,38,29)
(B,34,10)
(B,58,32)
(B,39,76)
CEVW221M4
CKSSYB104K10
CCSSCH220J50
CKSSYB104K10
CKSSYB104K10
C
C
C
C
C
244
246
251
260
301
(B,49,70)
(A,23,19)
(B,28,31)
(A,54,25)
(A,43,78)
CKSSYB104K10
CKSSYB104K10
CKSRYB102K50
CKSSYB104K10
CKSSYB221K50
C
C
C
C
C
302
303
304
305
307
(A,50,79)
(A,37,85)
(A,39,89)
(B,34,92)
(B,56,90)
CKSSYB221K50
CKSSYB472K25
CKSSYB103K16
CEVW101M16
CKSSYB104K10
C
C
C
C
C
601
602
701
703
706
(B,46,60)
(B,41,65)
(A,64,46)
(B,50,61)
(B,50,62)
CCSRCH102J50
CCSRCH102J50
CKSSYB104K10
CKSSYB103K16
CKSSYB104K10
C
C
C
C
C
707
712
714
716
722
(A,36,45)
(A,22,42)
(B,60,45)
(A,61,40)
(B,52,48)
CKSSYB104K10
CKSRYB224K16
CKSSYB104K10
CKSSYB103K16
CKSQYB475K6R3
C
C
C
C
C
723
903
906
907
910
(A,26,41)
(B,56,70)
(A,40,77)
(A,47,76)
(B,60,71)
CKSRYB105K10
CKSSYB471K50
CKSRYB224K16
CKSSYB103K16
CKSQYB225K10
Miscellaneous Parts List
Pickup Unit(P10)(Service)
Motor Unit(SPINDLE)
CXX1641
CXC4440
Motor Unit(LOADING/CARRIAGE) CXB8933
M 1
M 2
C
C
C
C
C
4
F
46
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
6. ADJUSTMENT
6.1 CD ADJUSTMENT
A
1) Cautions on adjustments
• In this product the single voltage (3.3V) is used for the
regulator. The reference voltage is the REFO1 (1.65V)
instead of the GND.
If you should mistakenly short the REFO1 with the GND
during adjustment, accurate voltage will not be obtained,
and the servo’s misoperation will apply excessive shock
to the pickup. To avoid such problems:
a. Do not mix up the REFO1 with the GND when
connecting the (-) probe of measuring instruments.
Especially on an oscilloscope, avoid connecting the (-)
probe for CH1 to the GND.
b. In many cases, measuring instruments have the same
potential as that for the (-) probe. Be sure to set the
measuring instruments to the floating state.
c. If you have mistakenly connected the REFO1 to the GND,
turn off the regulator or the power immediately.
• Before mounting and removing filters or leads for
adjustment, be sure to turn off the regulator.
• For stable circuit operation, keep the mechanism
operating for about one minute or more after the
regulator is turned on.
2) Test mode
This mode is used to adjust the CD mechanism module.
• To enter the test mode.
While pressing the 4 and 6 keys at the same time, reset.
• To exit from the test mode.
Turn off the ACC and back up.
Notes:
a. During ejection, do not press any other keys than the
EJECT key until the loaded disc is ejected.
b. If you have pressed the (→) key or (←) key during focus
search, turn off the power immediately to protect the
actuator from damage caused by the lens stuck.
c. For the TR jump modes except 100TR, the track jump
operation will continue even if the key is released.
d. For the CRG move and 100TR jump modes, the tracking
loop will be closed at the same time when the key is
released.
e. When the power is turned off and on, the jump mode
is reset to the single TR (91), the RF amp gain is set to 0dB,
and the auto-adjustment values are reset to the default
settings.
B
C
• In the test mode, any software protections will not
work. Avoid applying any mechanical or electrical
shock to the mechanism during adjustment.
• The RFI and RFO signals with a wide frequency range
are easy to oscillate. When observing the signals,
insert a resistor of 1k ohms in series.
• The load and eject operation is not guarantied with the
mechanism upside down. If the mechanism is blocked
due to mistaken eject operation, reset the product or
turn off and on the ACC to restore it.
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
47
1
2
3
4
- Flow Chart
[4]+[6]+Reset or
[4]+[6]+BU+ACC
[KEY]
A
Contents
Test Mode In
Display
[CD]or[SOURCE]
Source On
TRK
SEC
MIN
[BAND]
[3]
Power On
Power On
[2]
(T.Offset is adjusted)
[4]
(T.Offset is not adjusted)
RF AMP *1
Gain switching
SPINDLE *9
Speed switching
TRK 99 MIN 99 SEC 99
TRK GGMIN GGSEC GG
TRK SP MIN SP SEC SP
[6]
Focus Mode *2
switching
TRK
0x MIN0x SEC 0x
[1]
[→]
Tracking Servo
Close
CRG+
TRK 00 MIN00 SEC 00
B
[BAND]
[3]
Power Off
Focus Close
S curve check
TRK
MIN
SEC
TRK
91 MIN91 SEC 91
TRK
or
[BAND]
[1]
Power Off
T.Close and AGC
T.Close
Applicable servomechanism
Applicable servomechanism
TRK
MIN
SEC
TRK
?tr
MIN
00 MIN00 SEC00
99 MIN99 SEC99
SEC
TRK
?min ?sec
?tr
TRK
TRK
[6]
or
00 MIN00 SEC00
99 MIN99 SEC 99
TRK
[3]
MIN
SEC
TRK
or
00 MIN00 SEC00
99 MIN 99 SEC 99
Automatic adjustment
switching *3
TRK
TRK
?? MIN?? SEC ??
[→]
[←]
CRG-
T.Balance adjustment /
TRK8x MIN8x SEC8x
TRK8x MIN8x SEC8x
TRK ?? MIN?? SEC ??
RF AGC coefficient display
TRK ?? MIN ?? SEC ??
[2]
*8
CRG-
CRG+
RF AGC /
?min ?sec
[←]
*8
or
TRK 9x MIN 9x SEC 9x
or
[2]
T.BAL coefficient display
C
[1]
F,T,RF AGC *7
[BAND]
Power Off
TRK
MIN
[3]
F.Bias display switching
SEC
TRK
[6]
F,T AGC / F.Bias
RF AGC
?? MIN?? SEC ??
TRK
?tr
MIN
SEC
?min ?sec
[→]
*4
CRG/TR Jump +
CRG/TR Jump *5
value switching
TRK
?tr
MIN
SEC
TRK
?min ?sec
?tr
MIN
SEC
?min ?sec
[←]
*4
CRG/TR Jump TRK
?tr
MIN
SEC
?min ?sec
[2]
Tracking Open
TRK
or
8x MIN8x SEC 8x
9xMIN 9xSEC 9x
TRK
*6
[BAND]
[2]
Power Off
Tracking Open
TRK
MIN
SEC
TRK8x MIN8x SEC8x
or
D
*1)
→
TYP
TRK
MIN
SEC
*2) Focus Close
→
→
-6dB
-12dB
Operation
[Key]
Test Mode
(TRK 99 MIN 99 SEC 99)
S.Curve check setting
→
[BAND] Power On / Off
F EQ measurement setting
[→]
CRG + / TR Jump +
(Direction of the external surface)
[←]
CRG - / TR Jump (Direction of the internal surface)
[1]
U.CLS and AGC and Applicable servomechanism /
AGC, AGC display setting
[2]
RF Gain switching / Offset adjustment display /
T.Balance adjustment / T.Open
[3]
Close, S.Curve / Rough Servo and RF AGC /
F, T, RF AGC
[4]
SPDL 1X / 2X switching
As for the double speed (2x), audio output cannot be supported.
[5]
Error Rate measurement
[6]
F.Mode switching / Tracking Close /
CRG • TR Jump switching
*3) F.Offset Display → T.Offset Display → Switch to the order of the original display
*4) 1TR / 32TR / 100TR
E
*5) Single TR → 32TR → 100TR → CRG Move
9x(8x) : 91(81)
92(82)
93(83)
94(84)
*6) Only at the time of CRG move, 100TR jump
*7) TRK/MIN/SEC → F.AGC → T.AGC → F Bias → RF AGC
1st - ON : ERR count Beginning (30Sec)
2nd - ON : BER display data [%]
*8) CRG motor voltage = 2[V]
*9) Applicability : A, B, C, D, E, F
TYP(1X) →
2X
→
F
TRK
MIN
SEC
Applicability : G
TYP(2X) →
1X
TRK
MIN
SEC
1X
→
2X
As for the double speed (2x), audio output cannot be supported
48
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT
A
• Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.
• Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
• Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.
• Method :
• Measuring Equipment
• Measuring Points
• Disc
• Mode
B
• Oscilloscope, Two L.P.F.
• E, F, REFO1
• TCD-782
• TEST MODE
CD CORE UNIT(S10.1)
C
L.P.F.
E
Xch
100kΩ
F
Oscilloscope
390pF
VREF
Ych
100kΩ
390pF
VREF
L.P.F.
F
E
D
REFO1
• Checking Procedure
1. In test mode, load the disc and switch the 3V regulator on.
2. Using the → and ← buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase
difference is within 75° . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the
mechanism should be judged to be at fault.
• Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
• Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
E
F
DEH-P6700MP/XM/EW
5
6
7
8
49
1
2
3
4
Ech → Xch 20mV/div, AC
Fch → Ych 20mV/div, AC
Grating waveform
A
0°
30°
45°
60°
75°
90°
B
C
D
E
F
50
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
6.3 ERROR MODE
- Error Messages
Error is displayed with number for Error cause when CD is inoperative or stops with Error during operation.
The purpose is to reduce nonsense calls from users as well as to assist all related analysis and repair for defects
at service station.
A
(1) Basic Display Method
1) When CSMOD (CD mode area for system) is SERRORM, Error code will be written in DMIN (minutes area for
display), DSEC (seconds area for display). The same data shall be written in DMIN and DSEC. DTNO is blank as
usual.
2) Display Example of Head Unit
The following is about LCD display ability. xx is Error number.
8 digits
ERROR–xx
6 digits
ERR–xx
4 digits
B
E–xx
OR
Err–xx
(2) Error Code List
No. Classification Contents
10 Electricity
Carriage Home NG
Details • Cause
CRG can’t move to the inner.
CRG can’t move from the inner.
→ HOME SW failure, CRG movement failure.
Focus can’t be caught.
→ Back of Disc / Severe dirt and vibration.
C
11
Electricity
Focus Search NG
12
Electricity
Spindle Lock NG
Subcode NG
Not spindle, lock. Wrong subcode (can’t read).
→ Defective Spindle. Scratch and dirt on Disc. Intense vibration.
RF-amp NG
The appropriate gain of the RF amp cannot be obtained.
→ Defective spindle.
→ Scratched or dirty disc. Severe vibration. Abnormal CD signals.
17
Electricity
Setup NG
→ Blanc CD-R disc. Disc inserted upside down.
AGC protection doesn’t work, out of Focus soon.
D
→ Scratch on Disc/Severe dirt and vibration.
22
Disc
Impossible to play
There is no playable MP3 or WMA file present in a disc.
23
Disc
File Format NG
Contents are stored in an incompatible file format.
→ The contents in a CD-ROM disc inserted are recorded in a file format
other than ISO9660 Level-1 and 2.
30
Electricity
Search Time Out
Can’t reach the target address.
44
Disc
Impossible to play
There is no playable TRK No. present in a disc.
→ All TRK Nos. In a disc inserted are specified as a track which should
be skipped, in the track skip information.
50
Mecha
Disc Load / Eject NG
Disc loading/ejection cannot be complete.
→ Foreign objects entered into the mechanism. Disc caught in between
during loading/ejection.
A0
System
Power NG
→ No MP3 or WMA file exists in a CD-ROM disc inserted.
→ Defective CRG/tracking, or scratch on Disc.
E
Power supply (VD) isn’t connected to the ground.
→ Defective SW transistor. Abnormal power (failed connector)
Note : Error doesn’t display in mechanism only. (CD off causes mechanism off)
If TOC can’t be read, error wouldn’t occur, but mechanism still continues its operation.
The upper digits of error code is mainly classified by 3 kinds as follows:
1x: Setup related error, 3x: Search related error, Ax: Other errors.
DEH-P6700MP/XM/EW
5
6
7
8
F
51
1
2
3
4
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A
7.1.1 DISASSEMBLY
- Removing the Case (not shown)
1. Remove the Case.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1)
1
Remove the four screws.
B
1
Disconnect the connector and then remove the
CD Mechanism Module.
1
- Removing the Grille Assy (Fig.1)
2
Remove the two screws and then remove
the Grille Assy.
1
C
2
2
1
Fig.1
Grille Assy
- Removing the Tuner Amp Unit (Fig.2)
1
Remove the screw.
2
2
D
2
Remove the three screws.
3
Straighten the tabs at three locations
indicated.
4
Remove the screw and then remove
the Tuner Amp Unit.
2
4
1
E
3
3
3
Tuner Amp Unit
Fig.2
F
52
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
- How to hold the Mechanism Unit
1. Hold the top and bottom frame.
2. Do not squeeze top frame's front portion too tight,
because it is fragile.
A
B
Do not squeeze.
- Removing the Upper and Lower Frames
1. With a disc clamped, remove the four springs (A),
the two springs (B), the two springs (C), and the
four screws.
2. To remove the upper frame, open it on the fulcrum
A.
3. While lifting the carriage mechanism, remove the
three dampers.
4. With the frames removed, insert the connectors
coming from the main unit and eject the disc.
Caution: Before installing the carriage mechanism in
the frames, be sure to apply some alcohol to the
dampers and set the mechanism to the clamp mode.
Upper Frame
A
A
C
C
A
A
Carriage Mechanism
B
Damper
Lower Frame
C
A
D
Damper
B
Damper
E
F
DEH-P6700MP/XM/EW
5
6
7
8
53
1
2
3
4
- Removing the Pickup Unit
1. Apply shorting solder to the Pickup flexible cable.
Disconnect the cable.
2. Set the mechanism to the clamp mode.
3. Remove the lead wires from the inner holder.
4. Remove the washer, styling holder, change arm,
and pickup lock arm.
5. While releasing from the hook of the inner holder,
lift the end of the feed screw.
Caution: In assembling, move the planet gear to the
load/eject position before setting the feed screw
in the inner holder.
A
Shorting
Solder
B
Washer
C
Pickup Lock Arm
Change Arm
Styling Holder
Feed Screw
D
E
Inner Holder
Planet Gear
F
54
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
7.1.2 CONNECTOR FUNCTION DESCRIPTION
A
SW
F
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
10A
8 9 10 11
5 6
7
1 2 3 4
B
POWER SUPPLY
SPEAKER OUTPUT
FRONT OUTPUT
IP-BUS
SUBWOOFER OUTPUT
NON FADING OUTPUT
ANTENNA JACK
POWER SUPPLY, SPEAKER OUTPUT
Pin No.
Pin No.
9
1
FR+
10
2
RR+
11
3
FR12
4
RR13
5
FL+
14
6
RL+
15
7
FL16
8
RL-
NC
NC
B.REM
NC
NC
ACC
GND
B.UP
C
D
IP-BUS
Pin No.
1
2
3
4
5
6
BUS+
GND
GND
NC
BUSGND
Pin No.
7
8
9
10
11
BUS L+ INPUT
ASENB
BUS R+ INPUT
BUS R- INPUT
BUS L- INPUT
E
F
DEH-P6700MP/XM/EW
5
6
7
8
55
1
2
3
4
7.2 PARTS
7.2.1 IC
- Pin Functions (PE5468A)
A
Pin No.
1
2-4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29-31
32
33
34
35
36
37
38,39
40
41
42
43
44
45
46
47
48
49-55
56,57
58
59
60
61
62
63
64
65
66
67
68
69,70
B
C
D
E
Pin Name
swvdd
NC
TESTIN
LCDPW
TELIN
ejectin
FLPILM
dalmon
reset
XT2
XT1
VSS
X2
X1
REGOFF
REGC
VDD
ILMPW
SYSPW
ADPW
NC
IPPW
NC
ROMDATA
ROMCLK
ROMCS
NC
tunpce@
VST
VCK
VDT
NC
mute
NC
VSS
VDD
RDS57K
drst
rdslk
RDT
DORAON
NC
CSENSOUT
NC
ROT1,0
STRKEY2
RGBST
RGBCK
RGBDT
PCL
BRXEN
BSRQ
TSCK/BSCK
TSI/BSI
BSO
BRST
NC
I/O
O
Function and Operation
Grille : Chip enable output
Not used
Test program mode input
Not used
Telephone mute input
Eject sense input
Flap illumination output
For consumption low-current output
Reset input
Not used
Clock connection pin
GND
Crystal oscillator connection pin
Regulator operation specification signal input
Capacitor for regulator connect pin
Power supply
Illumination power supply control output
System power control output
A/D converter power supply control output
Not used
Power supply control output for IP BUS interface IC
Not used
ROM correction data input/output
Not used
Not used
Not used
PLL chip enable output2
E.VOL : Strobe output
E.VOL : Clock output
E.VOL : Data output
Not used
System mute output
Not used
GND
Power supply
RDS : 57kHz pulse count input
RDS : Decoder reset output
RDS : LOCK input L : RDS signal ON
RDS : Data input
Not used
Not used
CSENS state output
Not used
Rotary encoder pulse input 1,0
Steering remote controller input
RGB strobe output
RGB clock output
RGB data output
Clock adjustment output
P-BUS : Reception enable input/output
P-BUS : Service request input
P-BUS : Serial clock output
P-BUS : Serial data input
P-BUS : Serial data output
P-BUS : Reset output
Not used
I
O
I
I
O
O
I
I
I
I
O
O
O
O
I/O
O
O
O
O
O
O
O
I
O
I
I
O
O
I
I
O
O
O
O
I/O
I
O
I
O
O
F
56
DEH-P6700MP/XM/EW
1
2
3
4
5
Pin No.
71
72
73
74
75
76
77
78-81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
6
Pin Name
ASENSBO
EMUTE
TEST
SL
STRKEY1
NC
CSENS
NC
AVDD
AVREF
AVSS
RX
TX
NMI
LDET
RCK
dsens
NC
asens
bsens
TUNPDI
KYDT
DPDT
TUNPCK
TUNPDO
TUNPCE
BEEP
I/O
O
7
8
IP-BUS : Slave power supply control output
Not used
GND
TUNER : Signal level input
Steering remote controller input
Not used
Flap close sense input
Not used
A/D converter power supply terminal
A/D converter reference voltage terminal
GND
IP-BUS : Data input
IP-BUS : Data output
GND
RDS : PLL lock detection output
RDS : RDS clock input
Grille detach sense input
Not used
ACC power sense input
Back up power sense input
PLL IC data input
Grille data input
Grille data output
PLL clock output
PLL data output
PLL chip enable output
Beep tone output
I
I
I
I
O
I
O
I
O
I
I
I
I
I
I
O
O
O
O
O
A
B
C
81
100
* PE5468A
IC's marked by * are MOS type.
Be careful in handling them because they are very
liable to be damaged by electrostatic induction.
80
1
30
N.C.
BD4834G
N.C.
D
5
4
50
31
51
E
1
2
3
VOUT
VDD
GND
Vref
F
DEH-P6700MP/XM/EW
5
6
7
8
57
1
2
3
4
3
4
- Pin Functions(PD6340A)
Pin No.
1-5
6-9
10
11-14
15,16
17
18
19
20
21
22
23
24
25,26
27
28
29-32
33-55
56
57-64
A
B
Pin Name
SEG4-0
COM3-0
VLCD
KST3-0
KDT0,1
REW
DPDT
NC
KYDT
MODA
X0
X1
VSS
KDT2,3
NC
KST4
NC
SEG35-13
VDD
SEG12-5
I/O
O
O
O
I
I
I
O
I
O
O
O
LCD segment output
LCD common output
LCD drive power supply
Key strobe output
Key data input (analogue input)
Remote control reception input
Display data input
Not used
Key data output
GND
GND
Key data input
Not used
Key strobe output
Not used
LCD segment output
Power supply
LCD segment output
* PD6340A
16
1
C
64
17
49
32
33
48
D
NJM2388F84
E
F
58
DEH-P6700MP/XM/EW
1
2
5
6
7
8
- Pin Functions (MB88347PFV-G-BND)
Pin No.
1
2-7
8
9
10
11
12
13
14
15
16
Pin Name
VSS
AO2-7
VDD
VCC
AO8
DO
LD
CLK
DI
AO1
GND
I/O
GND
8-bit resolution D/A converter output
DC power supply
+5 V DC power supply
Serial address/data output
Load strobe input
Shift clock input
Serial address/data input
GND
O
O
O
I
I
I
O
A
B
* MB88347PFV-G-BND
8
1
9
16
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
59
1
2
3
4
- Pin Functions(UPD63763GJ)
Pin No.
1
2
3
4-8
9-16
17
18
19
20
21
22
23, 24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39-41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73-88
89-99
A
B
C
D
E
F
60
Pin Name
D.VDD
D1.GND
reset
AB12-8
AD7-0
cs
ASTB
read
write
wait
INTQ
IFMODE0, 1
D1.VDD
DA.VDD
ROUT
DA.GND
REGC
DA.GND
LOUT
DA.VDD
X.VDD
XTAL
xtal
X.GND
VDDREG15
PWMSW0
TEST3-1
PWMSW1
TESTEN
D1.GND
DIN
DOUT
SCKIN
SCKO
LRCKIN
LRCK
xtalen
D1.VDD
RFCK/HOLD
WFCK/MIRR
PLCK/RFOK
LOCK/RFOK
C1D1/C8M
C1D2/C16M
C2D1/RMUTE
C2D2/LMUTE
C2D3/SHOCK
D1.GND
C33M
(rcs)
RA11
(CKE)
ras
cas)(LDQM)
cas!(UDQM)
we
oe(cas)
D.GND
RDB0-15
RA0-10
I/O
I
I
I/O
I
I
I
I
O
O
I
O
O
I
O
I
I
I
I
I
O
I
O
I
O
I
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I/O
O
Power supply for digital circuits
GND for 1.6V digital circuits
Input of reset
Address bus 12-8 from the microcomputer
Address/data bus 7-0 to the microcomputer
Chip selection
Address strobe
Control signals(read)
Control signals(write)
Control signals(wait)
Interruption signals to the external microcomputer
Switching the microcomputer I/F 0, 1
Power supply for 1.6V digital circuits
Power supply for DAC
Output of audio for the right channel
GND for DAC
Connected to the capacitor for band gap
GND for DAC
Output of audio for the left channel
Power supply for DAC
Power supply for the crystal oscillator
Connected to the crystal oscillator(16.9344MHz)
Connected to the crystal oscillator(16.9344MHz)
Ground for the crystal oscillator
Control of 1.6V regulator
Setup 0 for PWM output(SD, MD)
Connected to GND
Setup 1 for PWM output(FD, TD)
Connected to GND
Input of audio data
Output of audio data
Clock input for audio data
Clock output for audio data
Input of LRCK for audio data
Output LRCK for audio data
Permission to oscillate 16.9344MHz
Power supply for 1.6V digital circuits
Output of RFCK/HOLD signal
Output of WFCK/MIRR signal
Output of PLCK/Output of RFOK
Output of LRCK/Output of RFOK
Information on error correction/C8M : 8MHz
Information on error correction/C16M : 16MHz
Information on error correction/Mute for Rch
Information on error correction/Mute for Lch
Information on error correction/Detection of vibration
Output of 33.8688MHz(CLK for SDRAM)
DRAM cs
Output of DRAM address 11
Output of DRAM CKE
Output of DRAM ras
Output of DRAM lower cas(LDQM)
Output of DRAM upper cas(UDQM)
Output of DRAM we
Output of DRAM oe(cas)
Ground for digital circuits
Input/output of DRAM data0-15
Output of DRAM address0-10
DEH-P6700MP/XM/EW
1
2
3
4
5
Pin No.
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120, 121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
6
Pin Name
D.VDD
FD+
FDTD+
TDSD+
SDMD+
MDREFOUTSV
AD.VDD
EFM
ASY
ATEST
RFI
AD.GND
AGCO
C3T
AGCI
RFO
EQ2, 1
RF2RFA.GND
A
C
B
D
F
E
VREFIN
A.VDD
REFOUT
REFC
FEFEO
ADIN
TETEO
TE2
TEC
LD
PD
D.GND
I/O
7
8
Power supply for digital circuits
Output of focus drive PWM +
Output of focus drive PWM Output of tracking drive PWM +
Output of tracking drive PWM Output of thread drive PWM +
Output of thread drive PWM Output of spindle drive PWM +
Output of spindle drive PWM REFOUT for servo
Power supply for ADC
Output of EFM signals
Input of asymmetry
Analog tests
Input of RF
Ground for the analog system
Output of RF
Connection to the capacitor for detecting 3T
Input of AGC
Output of RF(AGC)
Equalizer 2, 1
Reversal input of RF2
Reversal input of RF
Ground for the analog system
Input of A
Input of C
Input of B
Input of D
Input of F
Input of E
Input of reference voltage
Power supply for the analog system
Output of reference voltage
Connected to the capacitor for output of REFOUT
Reversal input of FE
Output of FE
Input of FE, TE A/D converter
Reversal input of TE
Output of TE
TE2
TEC
Output of LD
Input of PD
Ground for digital circuits
O
O
O
O
O
O
O
O
O
O
I
O
I
O
O
I
O
I
I
I
I
I
I
I
I
I
I
O
I
I
O
I
I
O
O
I
O
I
A
B
C
D
73
108
* UPD63763GJ
E
72
144
37
F
36
1
109
DEH-P6700MP/XM/EW
5
6
7
8
61
1
2
3
4
- Pin Functions(PE5454A)
Pin No.
1
2
3
4
5
6, 7
8
9
10
11
12
13
14
15
A
B
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35, 36
37
38
39-42
43
44
45
46
47
48
49
50
51
52
53
54
55
56-58
59
60
61
62
63
64
65
66
C
D
E
F
62
Pin Name
AVREF
AVSS
RFOK
NC
EVDD
NC
IC/FLMD0
VDD
REGC
VSS
X1
X2
reset
XT1
XT2
NC
NC
xint
NC
brst
BSI
BSO
bsck
FTXD
FRXD
BRXEN
bsrq
NC
DSCSNS
8EJ(S905)
12EJ(S904)
EVSS
EVDD
SRAMLEVEL0, 1
EMPH
emph
NC
adena
LRCKOK
SRAMLEVEL2
CD3VON
CONT
xrst
VDCONT
ROMDATA
ROMCS
ROMCK
LOEJ
CLCONT
CDMUTE
NC
xcs
NC
xwait
CLKOUT
LOCK
NC
xwrite
NC
I/O
Format
O
C
I
I
I
C
I
I
O
I/O
O
I
I/O
I/O
C
/C
C
/C
/C
I
I
I
O
O
O
C
C
C
O
O
O
O
O
O
O
I/O
O
O
O
O
O
C
C
C
C
C
C
C
/C
C
C
C
C
C
O
C
I
O
I
C
O
A power supply Positive power supply(5V)
A power supply GND
Output of state of RFOK
Not used
E power supply Positive power supply
Not used
IC : VSS direct connection/FLMOD0 : Pull-down
Positive power supply(5V)
Connected to the capacity stabilizing output of the regulator
GND
Oscillator connection for mainclock
Oscillator connection for mainclock
System reset input
Connected to the oscillator for subclock
(connected to VSS via the resistor)
Connected to the oscillator for subclock(Open)
Connected to EVDD or EVSS via the resistor
Not used
CD LSI interruption signal input
Connected to VSS via the resistor
P-Bus reset input
P-Bus serial data input
P-Bus serial data output
P-Bus serial clock input/output
For flash rewriting(transmitted signal)
For flash rewriting(received signal)
It is possible to receive P-Bus
P-Bus service request demand
Not used
Disc state sense input
Input of detection of 8 cm disc ejection
Input of detection of 12 cm disc ejection
E power supply GND
E power supply Positive power supply
SRAM level meter output
Emphasis information output
Emphasis information output
Not used
A/D reference voltage supply control output
(DOUT mute output)
SRAM level meter output
CD +3.3V power supply control output
Servo driver power supply control output
CD LSI reset control output
VD power supply control output
E2PROM data input/output
E2PROM chip selection output
E2PROM clock output
The direction change output of LOAD/EJECT
Driver input change output
CD mute control output
Not used
CD LSI chip selection output
Not used
CD LSI write control signal output
Internal system clock output(Open)
Spindle lock input
Not used
CD LSI write control signal output
Not used
DEH-P6700MP/XM/EW
1
2
3
4
5
Pin No.
67
68
69
70
71-83
84-86
87
88
89-93
94
95
96
97
98
99
100
Pin Name
xread
XASTB
BVSS
BVDD
AD0-12
NC
FMODE
FLRQ
NC
csens
TYPE_A/D
testin
HOME
TEMP
VDSENS
NC
6
7
I/O
O
O
Format
I/O
/C
I
O
C
CD LSI read control signal output
CD LSI address strobe output
B power supply GND
B power supply Positive power supply
Address/data Bus 0-12
Not used
For flash rewriting Connected to VSS via the resistor
For flash rewriting
Not used
Flap closing sense input
CD-DA analog/digital output change setup
Chip check test program starting input
Home SW sense input
Temperature information sense input
VD power supply short sense input
Not used
I
I
I
I
8
A
B
* PE5454A
75
51
Format
C
76
Meaning
CMOS
50
C
26
1
25
100
D
NJM2885DL1-33
Thermal
Protection
-+
E
Bandgap
Reference
1
2
3
IN
GND
OUT
F
DEH-P6700MP/XM/EW
5
6
7
8
63
1
2
3
4
- FM/AM Tuner Unit
5V
OSC
AM ANT
1
RDS_HSLK
RDS_LOCK
RDS_CK
18 19 20 21
RDS_DATA
14
DO
CE1
DI
SL
IC 3 EEPROM
5.0V
11
LDET
A
10 9 8
CK
5
ROM_VDD
CE2
WC
13
IC 5
3.3V
←
7 6
LPF
FMRF
ATT
Rch
3
IC 1
3.3V
FM ANT
ATT
FMRF
B
ANT adj
24
IC 2
2.5V
Lch
MIXER, IF AMP
RF adj
T51
23
DET, FM MPX,
RDS DECODER
CF52
No. Symbol
1 AMANT
C
2
3
4
5
6
7
D
E
RFGND
FMANT
VCC
SL
CE2
WC
AUDIOGND
NC
15
22
16
I/O Explain
I AM antenna input
I
O
I
I
RF ground
FM antenna input
power supply
signal level
chip enable-2
write control
8
9
10
11
12
13
CE1
CK
DI
LDET
OSCGND
ROM_VDD
I
I
I
O
chip enable-1
clock
data in
lock detector
osc ground
power supply
14
15
16
17
18
19
20
DO
DGND
NC
VDD_3.3
RDS_CK
RDS_DATA
RDS_LOCK
O
data out
digital ground
non connection
power supply
RDS clock
RDS data
RDS lock
21 RDS_HSLK
O
O
O
O
22 AUDIOGND
23 L ch
O
24 R ch
O
RDS high speed
lock
audio ground
L channel output
R channel output
4
VDD_3.3
DGND
12
VCC
OSCGND
2
3.3V
IC 4
3.3V 2.5V 2.5V
←
RFGND
CF51
17
AM antenna input high impedance AMANT pin is connected with
an all antenna by way of 4.7µH. (LAU type inductor) A series circuit
including an inductor and a resistor is connected with RF ground for
the countermeasure against the hum of power transmission line.
Ground of antenna block
Input of FM antenna 75Ω Surge absorber(DSP-201M-S00B) is necessary.
The power supply for analog block. D.C 8.4V ± 0.3V
Output of FM/AM signals level
Chip enable for EEPROM ”Low” active
You can write EEPROM, when EEPROM write control is “Low”.
Ordinary non connection
Chip enable for AF•RF ”High” active
Clock
Data input
“Low” active
Ground of oscillator block
Power supply for EEPROM pin 13 is connected with a power supply of
micro computer.
Data output
Ground of digital block
Not used
The power supply for digital block. 3.3V ± 0.2V
Output of RDS clock(2.5V)
Output of RDS data(2.5V)
Output unit “High” active(2.5V) (RDS_LOCK turns over by the
external transistor. “Low” active)
Output unit “High” active(2.5V)(RDS_HSLK turns over by the
external transistor. “Low” active)
Ground of audio block
FM stereo “L-ch” signal output or AM audio output
FM stereo “R-ch” signal output or AM audio output
F
64
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
DEH-P6700MP/XM/EW
65
F
COMMON
SEGMENT
SEG39
SEG38
SEG37
SEG36
E
COM0
COM 0
COM1
COM 1
COM2
COM 2
COM3
COM 3
SEG35
SEG34
SEG33
SEG32
SEG31
SEG30
D
SEG29
SEG28
SEG27
SEG26
SEG25
SEG24
SEG23
SEG22
SEG21
SEG20
C
SEG19
SEG18
SEG17
SEG16
SEG15
SEG14
SEG13
SEG12
SEG11
SEG10
B
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
SEG1
SEG0
A
- LCD(CAW1865)
7.2.2 DISPLAY
5
6
7
8
1
2
3
4
7.3 OPERATIONAL FLOW CHART
Power ON
A
VDD=5V
Pin 19, 41
bsens
Pin 93
B
bsens=L
asens
Pin 92
asens=L
dsens
Pin 90
dsens=L
C
ASENSBO←H
Pin 71
CSENS
Pin 77
2V < CSENS < 3V
Starts
communication
with Grille
microcomputer.
300ms
D
swvdd←L
Pin 1
Source keys
operative
- CSENS <
= 2V, 3V <
= CSENS
Last source returns.
CD loading functions are available.
Keys except for EJECT key are not available.
300ms
In case of the above signal, the communication
with Grille microcomputer may fail.
If the time interval is not 300msec, the oscillator
may be defective.
E
Source ON
SYSPW←H
Pin 21
Completes power-on operation.
(After that, proceed to each source operation)
F
66
DEH-P6700MP/XM/EW
1
2
3
4
5
6
7
8
7.4 CLEANING
A
Before shipping out the product, be sure to clean the
following portions by using the prescribed cleaning
tools:
Portions to be cleaned
CD pickup lenses
Cleaning tools
Cleaning liquid : GEM1004
Cleaning paper : GED-008
B
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
67
1
2
3
4
3
4
8. OPERATIONS
A
B
C
D
E
F
68
DEH-P6700MP/XM/EW
1
2
5
6
7
8
A
B
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
69
1
2
1
2
3
4
3
4
A
B
C
D
E
F
70
DEH-P6700MP/XM/EW
5
6
7
8
A
B
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
71
1
2
1
2
3
4
3
4
A
B
C
D
E
F
72
DEH-P6700MP/XM/EW
5
6
7
8
A
B
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
73
1
2
1
2
3
4
3
4
A
B
C
D
E
F
74
DEH-P6700MP/XM/EW
5
6
7
8
Fixing the front panel
A
If you do not operate the removing and attaching the front panel function, use the supplied
fixing screws and holders to fix the front panel to this unit.
1. Attach the holders to both sides of the front panel.
Holder
CND1249
Holder
CND1250
B
2. Replace the front panel to the unit.
C
3. Flip the holders into upright positions.
D
4. Fix the front panel to the unit using fixing screws.
Fixing Screw
BPZ20P060FZK
E
F
DEH-P6700MP/XM/EW
5
6
7
8
75
E
76
1
4*
5*
2
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Red (5*)
Accessory
(or back-up)
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Fuse
Front output
(FRONT OUTPUT)
3
Speaker leads
White
: Front left +
White/black : Front left ≠
Gray
: Front right +
Gray/black : Front right ≠
Green
: Rear left + or Subwoofer +
Green/black : Rear left ≠ or Subwoofer ≠
Violet
: Rear right + or Subwoofer +
Violet/black : Rear right ≠ or Subwoofer ≠
Subwoofer
Left
Front Speaker
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
Blue/white (6*)
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
Jack for the Wired Remote Control
Please see the Instruction Manual for the
Wired Remote Control (sold separately).
IP-BUS input (Blue)
Note:
Change the initial setting of this unit
(refer to the operational Manual).
The subwoofer outputof the unit is
monaural.
Perform these connections when using
the optional amplifier.
Subwoofer
Right
Front Speaker
System remote control
Power amp
(sold separately)
Power amp
(sold separately)
2
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
Black (ground)
To vehicle (metal) body.
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Yellow (3*)
Back-up
(or accessory)
Connect leads of the same
color to each other.
Antenna jack
Subwoofer output or
non fading output
C
Cap (1*)
When not using this terminal,
do not remove the cap.
2*
3*
D
This product
IP-BUS cable
Connecting cords with RCA pin plugs
(sold separately)
A
1*
Multi-CD player
(sold separately)
B
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
1
3
4
F
DEH-P6700MP/XM/EW
4
5
6
7
8
A
B
C
D
E
F
DEH-P6700MP/XM/EW
5
6
7
8
77
1
2
3
4
- Jigs List
Name
Test Disc
L.P.F.
A
Jig No.
TCD-782
Remarks
Checking
g the g
grating
g
Checking
g the g
grating
g ((Two pieces))
B
C
D
E
F
78
DEH-P6700MP/XM/EW
1
2
3
4

DEH-P6700MP/XM/EW

Transcription

Similar documents

B - Schematheek

DEH-80PRS/XNEW5 DEH

DEH-2310UB/XNEW5 DEH-2300UBB/XNEW5 DEH

Service Manual

D - Kazus.ru

DEH-P680MP/XN/UC

DEH-P880PRS/XN/UC

DEH-P8400MP XN/EW - Recambios, accesorios y repuestos

DEH-2800MP/XN/UC

DEH-P3600MP/XM/EW

KEX-M8547ZT/EW

Pioneer DEH

D - Basic Car Audio Electronics

Pioneer VSX-816, VSX