D - Kazus.ru

Transcription

D - Kazus.ru

ORDER NO.
CRT3598
DEH-P55BT/XN/EW
HIGH POWER CD/MP3/WMA PLAYER WITH BLUETOOTH WIRELESS TECHNOLOGY, RDS TUNER AND MULTI-CD CONTROL
DEH-P55BT
/XN/EW5
This service manual should be used together with the following manual(s):
Model No.
CX-3164
Order No.
CRT3583
Mech.Module
S10.5COMP1
Remarks
CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
K-ZZW. JAN. 2006 Printed in Japan
1
2
3
4
SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
A
• When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.
Caution:
1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.
B
- CD Section Precaution
1. You should conform to the regulations governing
the product (safety, radio and noise, and other
regulations), and should keep the safety during
servicing by following the safety instructions
described in this manual.
2. Before disassembling the unit, be sure to turn off
the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside
the unit.
3. To protect the pickup unit from electrostatic discharge
during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY".
4. After replacing the pickup unit, be sure to check the
grating.
C
D
E
F
2
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
[Important Check Points for Good Servicing]
In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures.
A
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
3 Make sure the soldering of repaired locations is properly performed.
B
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.
C
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
0 Safe environment should be secured during servicing.
D
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the specified substance.
Make sure the proper amount is applied.
E
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
5. Shipping mode and Shipping screws
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be
installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
F
DEH-P55BT/XN/EW5
5
6
7
8
3
1
2
3
4
CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8
2.1 PACKING ................................................................................................................................................... 8
2.2 EXTERIOR............................................................................................................................................... 10
2.3 CD MECHANISM MODULE..................................................................................................................... 12
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 14
3.1 BLOCK DIAGRAM ................................................................................................................................... 14
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE).............................................................................. 16
3.3 KEYBOARD UNIT.................................................................................................................................... 22
3.4 CD MECHANISM MODULE(GUIDE PAGE) ............................................................................................ 24
3.5 BLUETOOTH UNIT .................................................................................................................................. 34
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 36
4.1 TUNER AMP UNIT................................................................................................................................... 36
4.2 KEYBOARD UNIT.................................................................................................................................... 40
4.3 CD CORE UNIT(S10.5COMP1)............................................................................................................... 42
4.4 BLUETOOTH PCB ................................................................................................................................... 44
4.5 PANEL UNIT ............................................................................................................................................ 46
4.6 ANTENNA PCB ....................................................................................................................................... 47
5. ELECTRICAL PARTS LIST ............................................................................................................................ 48
6. ADJUSTMENT ............................................................................................................................................... 55
6.1 CD ADJUSTMENT................................................................................................................................... 55
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT .................................................... 57
6.3 ERROR MODE ........................................................................................................................................ 59
6.4 BLUETOOTH TEST MODE...................................................................................................................... 60
6.5 SYSTEM MICROCOMPUTER TEST PROGRAM ................................................................................... 65
7. GENERAL INFORMATION ............................................................................................................................. 66
7.1 DIAGNOSIS ............................................................................................................................................. 66
7.1.1 DISASSEMBLY ..................................................................................................................................... 66
7.1.2 CONNECTOR FUNCTION DESCRIPTION .......................................................................................... 71
7.2 PARTS...................................................................................................................................................... 72
7.2.1 IC .......................................................................................................................................................... 72
7.2.2 DISPLAY ............................................................................................................................................... 85
7.3 OPERATIONAL FLOW CHART ............................................................................................................... 86
8. OPERATIONS ................................................................................................................................................ 87
A
B
C
D
E
F
4
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
1. SPECIFICATIONS
A
B
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
5
1
2
1
2
3
4
3
4
A
B
C
D
E
F
6
DEH-P55BT/XN/EW5
5
6
7
8
A
B
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
7
1
2
3
4
2. EXPLODED VIEWS AND PARTS LIST
NOTES : • Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
• The > mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screw adjacent to mark on the product are used for disassembly.
• For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
A
"
2.1 PACKING
B
C
D
E
F
8
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
PACKING SECTION PARTS LIST
Mark No.
*
*
Description
Mark No.
Part No.
1
2
3
4
5
Cord Assy
Accessory Assy
Cord Clamper Assy
Screw Assy
Screw
CDE7059
CEA5688
CEA4636
CEA5317
BPZ20P060FTB
6
7
8
9
10
Screw
Polyethylene Bag
Screw
Screw
Polyethylene Bag
CBA1650
CEG-127
CRZ50P090FTC
TRZ50P080FTC
CEG-158
11
12
13
14
15
Handle
Holder
Holder
Bush
Polyethylene Bag
CNC5395
CND1250
CND2699
CNV3930
CEG-162
16
17
Sub Carton
Carton
CHG5195
CHG5879
18
19
20
*
*
*
Description
Part No.
Contain Box
Protector
Protector
CHL5879
CHP2540
CHP2797
21
22
23
24-1
24-2
Protector
Protector
Microphone Assy
Owner's Manual
Owner's Manual
CHP2798
CHP2812
CPM1059
CRB2140
CRD4062
24-3
24-4
24-5
24-6
24-7
Owner's Manual
Owner's Manual
Installation Manual
Passport
Warranty Card
CRD4063
CRD4064
CRD4065
CRY1013
CRY1157
24-8 Polyethylene Bag
25 Case Assy
A
B
E36-634
CXB3520
Owner's Manual,Installation Manual
Part No.
Language
CRD4062
English, Spanish
CRD4063
German, French
CRD4064
Italian, Dutch
CRB2140
Russian
CRD4065
English, Spanish, German, French, Italian, Dutch, Russian
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
9
1
2
3
4
3
4
2.2 EXTERIOR
A
B
C
D
E
F
10
DEH-P55BT/XN/EW5
1
2
5
6
7
8
EXTERIOR SECTION PARTS LIST
Mark No.
>
Description
Mark No.
Part No.
1
2
3
4
5
Screw
Screw
Screw
Screw
Cord Assy
BMZ30P040FTB
BSZ26P060FTC
BSZ30P060FTC
BSZ30P200FTC
CDE7059
6
7
8
9
10
Cap
Cable
Cord Assy
Case
Holder
CKX-003
CDE8272
CDE8051
CNB3329
CNC8659
11
12
13
14
15
Earth Plate
Insulator
Cushion
Sheet
Insulator
CNC8915
CNM7682
CNM8890
CNM9600
CNM9628
16
17
18
19
20
Panel
Tuner Amp Unit
Screw
Screw
Screw
CNS8625
CWN1485
ASZ26P060FTC
BPZ26P080FTC
BSZ26P160FTC
21
22
23
24
25
Clamper
Fuse(10 A)
Pin Jack(CN301)
Plug(CN981)
Plug(CN801)
CEF1047
CEK1208
CKB1054
CKM1376
CKS3537
26
27
28
29
30
Connector(CN701)
Connector(CN151)
Connector(CN971)
Connector(CN101)
Antenna Jack(CN401)
CKS3834
CKS4124
CKS4980
CKS5271
CKX1056
31
32
33
34
35
Holder
Holder
Insulator
Sheet
Heat Sink
CND2701
CND3434
CNM9629
CNN1130
CNR1668
36
37
38
39
40
FM/AM Tuner Unit
Holder
Bluetooth Unit
Connector(CN1051)
Connector(ANT1001)
CWE1951
CND1054
CWN1908
CKS4244
CKS5058
41
42
43
44
45
Connector(ANT1102)
Holder
Holder
Insulator
Sheet
CKS5058
CND2703
CND2704
CNM9449
CNM9598
46
47
48
49
50
BT Module(Y1001)
BT Antenna(ANT1101)
Terminal(CN402)
Insulator
IC(IC351)
CWX3131
CWX3132
VNF1084
XNM7031
PAL007B
51
52
53
54
55
IC(IC911)
Transistor(Q551,751)
Choke Coil(L981)
Detach Grille Assy
Screw
NJM2388F84
2SD2396
CTH1280
CXC5586
BPZ20P100FTB
56
57
Button(SRC)
Button(ILL,BAND)
CAC9520
CAC9521
Description
Part No.
58
59
60
Button(FUNC,AUDIO,DISP)
Button(1-6,TA)
Button(OPEN)
CAC9522
CAC9523
CAC9524
61
62
63
64
65
Cover
Lighting Conductor
Lighting Conductor
Lighting Conductor
Lighting Conductor
CNS8462
CNV8813
CNV8814
CNV8815
CNV8816
66
67
68
69
70
Plate
LCD
Connector(CN10)
Holder
Sheet
CNV8854
CAW1926
CKS5207
CND3112
CNM8658
71
72
73
74
75
Sheet
Lighting Conductor
Connector
Cushion
Button Unit
CNM9896
CNV8812
CNV8817
XNM7049
CXC5571
76
77
78
79
80
Grille Unit
Knob Unit
Spring
IC(IC3)
Chassis Unit
CXC5572
CXC5674
XBH7001
TSOP4840SB1
CXC5981
81
82
83
84
85
Button(EJECT)
Screw(M2x4)
Screw
Washer
Spring
CAC7752
CBA1649
CBA1925
CBF1038
CBH2650
86
87
88
89
90
Spring
Spring
Spring
Cord Assy
Holder
CBH2651
CBH2652
CBH2653
CDE7847
CND1254
91
92
93
94
95
Earth Plate
Gear
Arm
Arm
Arm
CND2708
CNV5997
CNV7400
CNV7401
CNV7402
96
97
98
99
100
Arm
Panel Unit
Connector(CN1951)
Connector(CN1950)
Holder Unit
CNV7403
CWM9781
CKS4806
CKS5192
CXB9502
101
102
103
104
105
Damper Unit
Sub Panel Unit
Cover
Panel
Lighting Conductor
CXB9503
CXC4398
CNM6854
CNS8209
CNV6487
106
107
108
109
110
Spring
Pin
Holder Unit
CD Mechanism Module(S10.5)
Screw
CBL1512
CNV6486
CXC5760
CXK5752
ISS26P055FTC
6
B
C
D
111 Insulator
7
E
F
XNM7106
DEH-P55BT/XN/EW5
5
A
8
11
1
2
3
4
3
4
2.3 CD MECHANISM MODULE
A
B
C
D
E
F
12
DEH-P55BT/XN/EW5
1
2
5
6
7
8
CD MECHANISM MODULE SECTION PARTS LIST
Mark No.
Description
Mark No.
Part No.
1
2
3
4
5
CD Core Unit(S10.5COMP1)
Connector(CN101)
Connector(CN901)
Screw
Screw
CWX3176
CKS4182
CKS5284
BMZ20P025FTC
BSZ20P040FTC
6
7
8
9
10
Screw(M2 x 3)
Screw(M2 x 4)
Washer
•••••
Spring
CBA1511
CBA1835
CBF1038
CBH2609
11
12
13
14
15
Spring
Spring
Spring
Spring
Spring
CBH2612
CBH2614
CBH2616
CBH2617
CBH2620
16
17
18
19
20
Spring
Spring
Spring
Spring
Spring
CBH2855
CBH2937
CBH2735
CBH2854
CBH2642
21
22
23
24
25
Spring
Spring
Spring
Spring
Spring
CBH2856
CBH2857
CBH2860
CBH2861
CBL1686
26
27
28
29
30
Arm
Frame
Bracket
Arm
Lever
CND1909
CND2582
CND2583
CND2584
CND2585
31
32
33
34
35
Arm
Bracket
Arm
Lever
Holder
CND2586
CND2587
CND2588
CND2589
CNV7201
36
37
38
39
40
Gear
Gear
Gear
Gear
Gear
CNV7207
CNV7208
CNV7209
CNV7210
CNV7211
41
42
43
44
45
Gear
Rack
Arm
Roller
Gear
CNV7212
CNV7214
CNV7216
CNV7218
CNV7219
46
47
48
49
Guide
Gear
Guide
Arm
CNV7361
CNV7595
CNV7799
CNV7805
Description
Part No.
50
Rack
CNV8342
51
52
53
54
55
Roller
Holder
Arm
Guide
Arm
CNV8343
CNV8344
CNV8345
CNV8347
CNV8348
56
57
58
59
60
Arm
Arm
Clamper
Arm
Guide
CNV8349
CNV8350
CNV8365
CNV8386
CNV8396
61
62
63
64
65
Arm
Collar
Motor Unit(M2)
Arm Unit
Chassis Unit
CNV8413
CNV8938
CXC4026
CXC4027
CXC4028
66
67
68
69
70
Gear Unit
Frame Unit
Motor Unit(M1)
Screw Unit
Screw
CXC4029
CXC4031
CXC6742
CXC6359
JFZ20P020FTC
71
72
73
74
Screw
Washer
Pickup Unit(P10.5)(Service)
Screw
JGZ17P022FTC
YE20FTC
CXX1942
IMS26P030FTC
6
B
C
D
E
F
DEH-P55BT/XN/EW5
5
A
7
8
13
1
2
3
4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
3.1 BLOCK DIAGRAM
A
A TUNER AMP UNIT
CN101
DI
LDET
8
5
1
7
11
IP-BUS
RDS_LOCK
RDS_CK
DO
RDS_HSLK
18 19 20 21
RDS_DATA
14
LDET
11
CE1
DI
SL
10 9 8
CK
5
ROM_VDD
13
CE2
NC
7 6
DO
CK
CE1
SL
CE2
VDD
CN971
4
MIC IN
BUSBUS+
BUSL+
BUSL
3
5
A
5
2
3
1
AUX IN
ANTENNA
AM ANT
1
1
LPF
FMRF
ATT
Rch
2,3
IC 1
3.3V
FM ANT
ATT
FMRF
Lch
MIXER, IF AMP
RF adj
DGND
AUDIOGND
NC
2
12
15
22
16
CF52
VCC
OSCGND
C
RFGND
T51
4
IC 4
3.3V 2.5V 2.5V
3.3V
BT+B
1
IC451
NJM2391DL1-33
Q553
BLUETOOTH MODULE
3.3V
SIOF_SCK
2
N1
3
SCIF1_RTS
SCIF1_TXD
SCIF1_RXD
SCIF1_CTS
LDMD
15
LOAD/ CARRIAGE
MOTOR
8
8
47
BTRST
49
142
Q101
5
5
8
143
REFO
133
AC,BD
F,E
3
FOP
2
TOP
1
TOM
4
LD+
14
MUTEN
IC1041
AK2301A
VFTN
GSR
23
BTMUTE
12
12
15
7
MICIN
10
TELOUT
1
10
1
84
BTMUTE
MICIN
TELOUT1
3V 5V
4
9
3 BTCTS3
BTRX3
5
4
6
32
6
IC501(2/2)
8
TC74VHCT08AFTS1
34
LD
IC201
UPD63763CGJ
PD
LOUT
LOUT
31
16
5
LOUT
2
VDD
34
Q701
41
40
47
32
31
30
42
S904
12EJ
S905
8EJ
VDD
RGBDT
11
10
/RESET
10
CDMUTE
8
11
13
CLCONT
/CD3VON
56
RESET
CSENSOUT
IC701
PE5505A
CD CONTROLLER
BDATA,BSCK
X1 12
12EJ
8EJ
X2 13
DSCSNS
HOME
VDCONT
VD
VD
X701
4.00MHz
49
VDCONT
1
20
2
19
9
12
VD
Q751
FLPILM
MECHA VD
B.UP
ROT0
Q752
ROT1
IC203
NJM2886DL3-33
2
42
40
66
65
VDCONT
V
S901
HOME
SWVDD
S802
39
D SENSE SW
1
3
VD
CSENS
DPDT/TSO
KYDT/TSI
DEH-P55BT/XN/EW5
1
EJTIN
BRST,BRXEN,BSRQ,BDATA,BSCK
+3.3V REGULATOR
14
54
B.
BRST,BRXEN,BSRQ
CONT
DSENS
4
53
52
LOEJ
S903
DSCSNS
V3R3D
41
VDD
43
14
RESET
39
CDMUTE
CD3VON
46
F
X
15
63
LOCK
16
SOP CLCONT 21
15
SOM
22
18
LOEJ
LCOP
17
9
CONT
LCOM
M
RGBST
RGBCK
SWVDD
IC301
BA5835FP
M
ILMPW
XRST,XASTB,ADO,XCK,
XSO,XSI,WAIT,XINT
VDD
CD
12
FOM
DRIVER
11
FOP
14
TOP
13
TOM
11
RESET
S651
RESET
LOCK/RFOK
56
SD,MD
10
1
IC651
BD4835G
X201
16.93MHz
XOUT
13
IC601(2/2)
PEG238A
RESET
RF-AMP,CD DECODER,
XTAL
MP3 , WMA, DECODER,
DIGITAL SERVO / DATA PROCESSOR
/XTAL 35
14
SYSTEM
CONTROLLER
CDL
1
50
MEMCS
98
MEMDI
51
MEMWP
99
MEMDO
100
MEMCK
BTCTS
BTRX
33
BTTX
36
BTRTS
CN701
85
BTMUTE
XIN
REFOUT
TD,FD
MUTE
BTRST
5V 3V
BTTX3
BTRTS3
CN901
FOM
3
FOP
2
1 TOP
TOM
4
BTTEST
SYSPW
BTCTS
3
BTRX
5
BTTX
4
BTRTS
6
E
SPINDLE
MOTOR
BTRST
7
Q1042
CODEC
V3R3D
15
VREF 8
FOM
BCLK
7
BTTEST
D CD CORE UNIT(S10.5COMP1)
HOLOGRAM
UNIT
FOCUS ACT.
MONITOR
TRACKING ACT.
DIODE
22
RSTN
I2
H3
H2
I1
CN101
LASER
DIODE
DX
4 DR
5
FS
O2
SIOF_SYNC
PICKUP UNIT
(P10.5)(SERVICE)
N2
N3
SIOF_TXD
D
Q591
BTPW
BTTEST
Q1041
SIOF_RXD
2,3
MUTE
14
Q1002
Q2
RESETP
RF_I/O
Y551
14
48
Y1001
ANT1001
1
A5
CN1051
BT3V
Q1001
P1
SIOF_SS2
ANTENNA
3
D3.3V
BLUETOOTH PCB
ANTENNA PCB
ANT1102
ANT1101
B.UP
BT 3V REGULATOR
SYS +B
F
Q552
Q551
17
TUN 3.3V
E
23
DET, FM MPX,
RDS DECODER
VDD_3.3
ANT adj
24
IC 2
2.5V
←
3
+IN
←
OSC
CN401
+I
1
IC 5
5V 3.3V
IC 3 EEPROM
5.0V
B
3
3
4
38
91
29
30
5
6
7
8
A
CN101
Q101
8
5
1
7
11
S
B.UP
BUSBUS+
BUSL+
BUSL-
80
ALC
CN971
4
3
5
IP-BUS DRIVER
IC581
AN6123MS
2
3
1
PEE
1 TX
IC101
6 HA12241FP 2 RX
5
IC202
BA3131FS
5
8
3
+IN1B
IPPW
8
9
7
SW1
1
+IN1A SW2
OUT1
28
19
27
79
21
20
2
89
KEYD
KEYAD
ASENBO
22
69
CE1
70
DO
58
DI
57
WIRED
REMOTE
CN301
TX
RX2
RX
IPPW
SEL2
SEL1
SWL
SWL
8
Q303
SYSTEM
CONTROLLER
RCA OUT
FL
FL
Q304
TUNPCE2
4
B
Q301
B.UP
VDD REGULATOR
TUNPCE1
Q901
TUNPDO
VDD
TUNPDI
59
TUNPCK
95
SL
CK
SL
3
2
1
SP601
BUZZER
IC601(1/2)
PEG238A
CE2
CN151
KEYD
KEYAD
Q902
Q404
RDS_CK
16
RDS_LOCK
45
DALMON
RCK
RDSLK
46
RDT
ASENS
RDS_HSLK
44
BUP1 16
Q921
72
ACC1
14
ACC SENSE
RDS57K
Q951
VDD
17
LDET
CN981
B.UP
BACKUP SENSE
BSENS 73
Q403
RDS_DATA
67
TEL1
LDET
TELIN
9
8
SOURCE
CONNECTOR
TEL IN
B
C
ELECTRONIC VOLUME/
SOURCE SELECTOR
Q552
B.UP
1
4
BUSL+
Q553
BUSL-
5
TUNL
3
CDL
2
GND
B.UP
POWER AMP
IN1L
IN4L+
IN4LIN3L
R/SWL
VCC1,2
12
14
IC201
6
FRONTL
PML015A
7
REARL
12
IN2L
VST,VCK,VDT
OUT2OUT2+
Switch_out
MUTE STBY
4
22
8
W
IN2(RL)
OUT4OUT4+
IC351
PAL007B
IN4(FL)
15
6,20
23
FL22 7
FL21 5
21
3
RL22 8
RL21 6
5
25
BRE1
MUTE
11
Q352
MUTE
SYSPW
TUNER 3V
REGULATOR
85
1
3V 5V
3
XIN
STEM
ROLLER
XOUT
MEMORY
11
1
2
3
5
8
6
5V 3V
4
12
IC521
TC74VHC08FTS1
9
IC431
NJM2391DL1-33
1
SYS +B
Q351
1
3
1
50
MEMCS
98
MEMDI
51
MEMWP
99
MEMDO
100
MEMCK
TUN 3.3V
MUTE
IC501(2/2)
TC74VHCT08AFTS1
3
6
MUTE
IC541
S99-50084
CS
SO
W#
SI
SYS+B
Q381
2
SYS+B
B.UP
E-MUTE
IC911
NJM2388F84
4
1
D
B.UP
SYSPW
SCK
13
11
X601
15.000MHz
C
IL+B CONTROL
01(2/2)
G238A
B.UP
CN801
Q821
IL+B
10
B
PANEL UNIT
5
10
KEYBOARD UNIT
CN10
CN1951
CN1950
8
IL+B
Q822
(RGB)
IC2
BU2507FV
RGBDT
EJTIN
RGBCK
52
RGBDT
ROT0
ROT1
4
3
3
12
7
7
4
RGBST
9
1 RGBCK
10
10
9
LD
A01-A06
LED DRIVE
RGBDT 11 DI
EJSW
42
Q801
FLPILM
40
66
Q802
8
8
5
5
1
9
1
9
ROT0 13
ROT1
12
65
EJECT
S1
13
9
4
12
7
6
2
2
11
ROT0 10
ROT1
SWVDD
1
SWVDD
2
3
DPDT/TSO
KYDT/TSI
38
91
Q832
CSENS 6
DPDT
29
KYDT
30
S3
CH3
S4
CH4
S6
CH2
S7
CH5
S8
BAND
S9
SOURCE
S10
TA
S11
AUDIO
S12
FUNC
S13
OFF HOOK
S15
DISP
S16
ILL
6
11
2
11
11
10
3
14
14
8
5
S17
ON HOOK
KDT1-4
REM.CON.
SWVDD
IC3
1
TSOP4840SB1
DPDT
50
KYDT
49
S5
CH6
S2
CH1
KDT1-4,KST1
Q831
CSENS
E
KEY MATRIX
VDD
SWVDD
Q1-Q14
CLK
S1970
54
B.UP
FLPILM
4
3
57
69
REM
KST1
RXD
TXD
47
VCC
46
V3
KDT1-4,KST2-5
RGBCK
RGBST
53
KST1
ILMPW
RGBST
41
KEY DATA
SWVDD
(ILLUMINATION)
POUT1
X0
LCD DRIVER/
KEY CONTROLLER
IC4
PD6538A
X1
Q90
48
LED DRIVE
54
55
X1
5.00MHz
F
LCD1
DEH-P55BT/XN/EW5
5
6
7
8
15
1
2
3
4
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or
"ELECTRICAL PARTS LIST".
A-a
A
A-a
Large size
SCH diagram
A-b
WIRED REMOTE
CONTROL
A-a
A-b
A-a
Guide page
A-b
Detailed page
D
CN901
B
CD:+0.3dBs
FM(30%):-20.0dBs
AM(30%):-20.0dBs
C
D
DSENSE
RESET
SYSTEM CONTROL
E
B
CN10
8.1V
EJECT
IB-BUS:+2.2dBs
C
F
PANEL UNIT
A C
16
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
A-b
A
TE
A
TUNER AMP UNIT
B
FRONT
OUTPUT
SUB WOOFER,
REAR OUTPUT
FM:-1.9dBs
AM:-1.9dBs
IB-BUS:10.3dBs
CD:10.4dBs
AUX:10.3dBs
TEL:10.3dBs
>
FM:-1.9dBs
AM:-1.9dBs
IP-BUS:+10.3dBs
CD:+10.4dBs
AUX:+10.3dBs
TEL:+10.3dBs
C
MICROPHONE
INPUT
+2.2dBs
AUX INPUT
E
CN1051
D
ONTROL
>
FUSE
CEK1208
600µH
10A
-5.0dBs
FM:+24.1dBs
AM:+24.1dBs
IP-BUS:+36.3dBs
CD:+36.4dBs
AUX:+36.3dBs
TEL:+36.3dBs
E
BACK
UP
ILM
B.
REM
GND ACC
NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.
F
A
DEH-P55BT/XN/EW5
6
RR
+
FR
+
FL
+
RL
+
Decimal points for resistor
and capacitor fixed values
are expressed as :
2.2 ← 2R2
0.022 ← R022
The > mark found on some component parts indicates
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
5
RR
FR
FL
RL
-
7
8
17
E
WIRED REMOTE
CONTROL
B
18
1
2
1
2
FM(30%):-20.0dBs
AM(30%):-20.0dBs
CD:+0.3dBs
A-a A-b
A-b
CN901
D
1
3
2
3
4
A
3
C
D
F
A-a
DEH-P55BT/XN/EW5
4
5
IB-BUS:+2.2dBs
B
6
7
PANEL UNIT
A-a A-b
8.1V
4
C
EJECT
6
CN10
SYSTEM CONTROL
5
7
8
A
5
6
A-b
B
C
D
E
F
A-a C
DEH-P55BT/XN/EW5
8
19
DSENSE
RESET
FM:-1.9dBs
AM:-1.9dBs
IB-BUS:10.3dBs
CD:10.4dBs
AUX:10.3dBs
TEL:10.3dBs
A-a A-b
A
B
A-b
20
1
>
TUNER AMP UNIT
A
2
1
2
3
+2.2dBs
3
AUX INPUT
2
MICROPHONE
INPUT
FM:-1.9dBs
AM:-1.9dBs
IP-BUS:+10.3dBs
CD:+10.4dBs
AUX:+10.3dBs
TEL:+10.3dBs
SUB WOOFER,
REAR OUTPUT
FRONT
OUTPUT
1
4
C
D
E
F
3
DEH-P55BT/XN/EW5
4
5
CN1051
6
10A
B.
REM
GND ACC
ILM
BACK
UP
RR
FR
FL
RL
-
RR
+
FR
+
FL
+
RL
+
7
4
5
7
The > mark found on some component parts indicates
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
Decimal points for resistor
and capacitor fixed values
are expressed as :
2.2 ← 2R2
0.022 ← R022
FM:+24.1dBs
AM:+24.1dBs
IP-BUS:+36.3dBs
CD:+36.4dBs
AUX:+36.3dBs
TEL:+36.3dBs
600µH
>
FUSE
CEK1208
6
A-a A-b
NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.
-5.0dBs
E
5
8
A
6
DEH-P55BT/XN/EW5
8
B
C
D
E
F
A-b
21
1
2
3
4
3
4
3.3 KEYBOARD UNIT
C
CN1951
8.2V
5.2V
A
B
VOLUME
C
LCD DRIVER
D
E
F
B
22
DEH-P55BT/XN/EW5
1
2
5
6
7
8
A
B
KEYBOARD UNIT
B
C
D
E
: The power supply is shown with the marked box.
F
B
DEH-P55BT/XN/EW5
5
6
7
8
23
1
2
3
4
3.4 CD MECHANISM MODULE(GUIDE PAGE)
A
B
S
C
T
F
S
C
T
F
D-a
PICKUP UNIT(P10.5)(SERVICE)
$
F
F
F
T
T
T
F
@
T
F
F
T
C
!
T
SWITCHES:
CD CORE UNIT(S10.5COMP1)
S901:HOME SWITCH..........ON-OFF
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
The underlined indicates the switch position.
CD DRIVER
M1 CXC6742
SPINDLE MOTOR
NC
NC
NC
S
NC
S
NC
NC
C
NC
#
NC
C
NC
NC
M2 CXC4026
LOADING/CARRIAGE MOTOR
T
S
NC
NC
6
8
NC
C
F
NC
7
9
4
E
NC
NC
F
F
T
3
T
S
S
C
C
2
1
F
D
24
DEH-P55BT/XN/EW5
1
2
3
4
NC
NC
NC
NC
NC
D
5
6
7
8
A
D-b
B
SIGNAL LINE
F
T
C
S
FOCUS SERVO LINE
TRACKING SERVO LINE
CARRIAGE SERVO LINE
SPINDLE SERVO LINE
D
0
+ 3.3 V REGULATOR
C
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
D
NC
NC
NC
NC
CD3VON(MCKRQ)
NC
SRAMLEVEL2
NC
ADENA
NC
NC
NC
NC
NC
NC
NC
SRAMLEVEL1
NC
SRAMLEVEL0
CD CONTROLLER
5
(S904)
(S905)
E
NC
NC
NC
^
%
A
CN701
F
D
DEH-P55BT/XN/EW5
5
6
7
8
25
F
2
3
T
!
@
3
E
D-a
DEH-P55BT/XN/EW5
4
T
F
F
T
T
T
F
F
2
T
F
F
$
T
T
C
S
S
1
C
26
F
F
D-b
SWITCHES:
S905:8EJ SWITCH...............ON-OFF
D-a
A-a D-b
1
4
A
1
B
C
D
5
6
M2 CXC4026
LOADING/CARRIAGE MOTOR
M1 CXC6742
SPINDLE MOTOR
C
C
S
S
F
T
T
F
F
T
D-a
A-a D-b
9
8
CD DRIVER
4
S
7
C
6
#
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
6
1
2
3
SWITCHES:
S905:8EJ SWITCH...............ON-OFF
S
S
C
C
5
7
7
8
A
2
3
D-b
B
C
D
E
F
D-a
DEH-P55BT/XN/EW5
8
27
NC
NC
NC
NC
0
C
D-b
28
1
2
S
C
T
F
D CD CORE UNIT(S10.5COMP1)
SPINDLE SERVO LINE
CARRIAGE SERVO LINE
TRACKING SERVO LINE
FOCUS SERVO LINE
SIGNAL LINE
B
+ 3.3 V REGULATOR
D-a D-b
1
2
3
3
4
A
D
E
F
1
DEH-P55BT/XN/EW5
4
5
6
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
CD CONTROLLER
NC
(S905)
(S904)
SRAMLEVEL0
SRAMLEVEL1
ADENA
SRAMLEVEL2
CD3VON(MCKRQ)
D-a D-b
A
CN701
6
2
7
%
^
5
5
7
8
A
B
C
D
E
NC
F
3
D-b
DEH-P55BT/XN/EW5
8
29
NC
NC
NC
NC
NC
1
2
- Waveforms
A
1 DSCSNS 5 V/div
2 8SNS
5 V/div
3 12SNS
5 V/div
B
500 ms/div 1 DSCSNS 5 V/div
4 CLCONT 5 V/div
5 VD
10 V/div
2 8SNS
5 V/div
3 12SNS
5 V/div
8 cm CD Loading operation
Ref.:
GND
Ref.:
GND
Ref.:
GND
Mode:
Normal
Mode:
Normal
Mode:
Normal
1 V/div
1 s/div
500 mV/div
500 mV/div
6 SIN
7 CIN
8 TIN
6 SIN
7 CIN
8 TIN
1 V/div
1 s/div
500 mV/div
500 mV/div
500 ms/div
1 V/div
1 s/div
500 mV/div
500 mV/div
12 cm CD-DA setup operation after loading
12 cm CD-ROM(1 session) setup operation
after loading
12 cm CD-ROM(3 sessions) setup operation
after loading
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
200 mV/div 500 ms/div ! TE
2 V/div
@ FE
2 V/div
500 mV/div 200 ms/div @ FE
500 mV/div
9 FIN
! TE
8 TIN
12 cm CD-DA Source On setup operation
Source On setup operation
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
@ FE
9 FIN
! TE
8 TIN
E
Note : 1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage REFO1(1.65 V)
9 FIN
0 RFOK
6 SIN
D
4
6 SIN
7 CIN
8 TIN
C
3
500 mV/div 20 ms/div
500 mV/div
500 mV/div
500 mV/div
# MDX
6 SIN
500 mV/div 20 ms/div
500 mV/div
500 mV/div
500 mV/div
CD-DA Play operation
2 V/div
50 ms/div # MDX
200 mV/div
6 SIN
2 V/div
5 µs/div
500 mV/div
CD-ROM play operation(Regular track Jump)
Spindle waveform during play operation
Spindle waveform during play operation
(Wider)
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
F
30
DEH-P55BT/XN/EW5
1
2
3
4
5
9 FIN
@ FE
6
500 mV/div 200 ms/div ! TE
500 mV/div
$ RFAGC
7
8
$ RFAGC
! TE
8 TIN
500 mV/div 2 ms/div
500 mV/div
500 µs/div
1 V/div
500 mV/div
500 mV/div
Focus Search waveform
Track Open waveform
1 Track Jump waveform
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
TEST
Mode:
TEST
Mode:
TEST
A
B
1 V/div
500 µs/div $ RFAGC
500 mV/div
! TE
500 mV/div
8 TIN
$ RFAGC
! TE
8 TIN
$ RFAGC
! TE
8 TIN
1 V/div
1 ms/div
500 mV/div
500 mV/div
1 V/div
2 ms/div
500 mV/div
500 mV/div
4 Tracks Jump waveform
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
TEST
Mode:
TEST
Mode:
TEST
C
$ RFAGC
! TE
7 CIN
6 SIN
200 ms/div % LOUT
1 V/div
1 V/div
^ ROUT
500 mV/div
2 V/div
Search operation(Outter to Inner)
1 V/div
1 V/div
200 µs/div 1 DSCSNS 5 V/div
2 8SNS
5 V/div
3 12SNS
5 V/div
Analog audio waveform
500 ms/div
12 cm CD Eject operation
D
Ref.:
REFO
Ref.:
AGND
Ref.:
GND
Mode:
Normal
Mode:
Normal
Mode:
Normal
1 DSCSNS 5 V/div
5 CLCONT 5 V/div
4 LOEJ
5 V/div
2 8SNS
5 V/div
3 12SNS
5 V/div
500 ms/div 6 SIN
7 CIN
8 TIN
1 V/div
500 ms/div
500 mV/div
500 mV/div
E
CD-DA → CD-ROM mode change(Band key)
Ref.:
GND
Ref.:
GND
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
F
DEH-P55BT/XN/EW5
5
6
7
8
31
1
6 SIN
7 CIN
8 TIN
A
2
3
500 ms/div $ RFAGC
1 V/div
500 mV/div
8 TIN
500 mV/div
! TE
9 FIN
1 V/div
1 V/div
1 V/div
1 V/div
CD-ROM → CD-DA mode change(Band key)
Black dot(800 µm) during play
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
4
500 µs/div
B
C
D
E
F
32
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
A
B
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
33
1
2
3
4
3
4
3.5 BLUETOOTH UNIT
A
E
BLUETOOTH PCB
B
C
D
E
F
ANTENNA PCB
F
E F
34
DEH-P55BT/XN/EW5
1
2
5
6
7
8
A
A
B
C
D
BLUETOOTH UNIT
Consists of
BLUETOOTH PCB
ANTENNA PCB
E
F
E
DEH-P55BT/XN/EW5
5
6
7
8
35
1
2
3
4
4. PCB CONNECTION DIAGRAM
4.1 TUNER AMP UNIT
A
NOTE FOR PCB DIAGRAMS
150
1.The parts mounted on this PCB
include all necessary parts for
several destination.
For further information for
respective destinations, be sure
to check with the schematic diagram.
2.Viewpoint of PCB diagrams
WIRED REMOTE
CONTROL
140
1
IP-BUS
2
Capacitor
Connector
CORD ASSY
3
4
130
SIDE A
3
7
2
6
11 10 9
1
5
8
B
Chip Part
P.C.Board
A
SIDE B
120
110
TUNER AMP UNIT
100
C
CORD ASSY
90
80
70
D
60
50
E
CN1051
40
E
30
20
DSENSE
RESE
10
F
Y
A
36
0
X
10
20
30
40
50
60
DEH-P55BT/XN/EW5
1
2
3
4
70
5
6
7
8
A
SIDE A
SUB WOOFER OR
FRONT
OUTOUT REAR OUTPUT
SSY
FM/AM
ANTENNA
B
C
FM/AM TUNER UNIT
Y
D
E
RESET
F
D
FRONT
70
80
90
100
C
CN901
110
120
130
CN1950
140
150
160
A
170
DEH-P55BT/XN/EW5
5
6
7
8
37
1
A
A
2
3
4
TUNER AMP UNIT
B
C
D
E
F
A
38
170
160
150
140
130
120
110
100
DEH-P55BT/XN/EW5
1
2
3
4
90
80
5
6
7
8
A
SIDE B
150
140
1
1
130
B
120
110
100
C
90
80
70
D
60
50
40
E
30
20
10
F
Y
90
80
70
60
50
40
30
20
10
X
A
0
DEH-P55BT/XN/EW5
5
6
7
8
39
B
40
1
2
F
X
10
20
BAND
30
40
50
FUNC
60
AUDIO
D
3
0
ILL
VOLUME
3
4
6
10
1
9
7
8
2
5
70
DISP
80
1
90
2
100
110
3
120
4
130
5
140
6
150
TA
2
Y
10
ON HOOK
OFF HOOK
E
20
30
SRC
B
40
1
3
4
4.2 KEYBOARD UNIT
A
KEYBOARD UNIT
SIDE A
B
C
DEH-P55BT/XN/EW5
4
5
B
6
7
8
KEYBOARD UNIT
SIDE B
A
150
140
130
C
CN1951
B
120
110
100
C
90
80
70
D
60
50
40
E
30
20
10
X
F
40
30
20
10
Y
0
B
DEH-P55BT/XN/EW5
5
6
7
8
41
1
2
3
4
4.3 CD CORE UNIT(S10.5COMP1)
D
SIDE A
A
A
CN701
B
REFO1
20
E
F
C
HOME
CN901
D
M2
LOADING
/CARRIAGE
MOTOR
M1
SPINDLE
MOTOR
E
IC203
IC301
F
D
42
DEH-P55BT/XN/EW5
1
2
3
4
5
D
6
7
8
SIDE B
A
8EJ
12EJ
B
DSCSNS
C
D
E
F
D
DEH-P55BT/XN/EW5
5
6
7
8
43
1
2
3
4
4.4 BLUETOOTH PCB
E
SIDE A
BLUETOOTH PCB
A
A
40
B
30
C
20
D
10
E
Y
0
X
10
20
30
F
E
44
DEH-P55BT/XN/EW5
1
2
3
4
5
E
6
7
8
SIDE B
BLUETOOTH PCB
A
40
B
BT MODULE
30
C
20
D
10
E
Y
30
20
10
X
0
F
F
ANT1102
E
DEH-P55BT/XN/EW5
5
6
7
8
45
1
2
3
4
4.5 PANEL UNIT
A
C
PANEL UNIT
SIDE A
B
CN10
EJECT
B
C
C
D
SIDE B
PANEL UNIT
A
CN801
E
F
C
46
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
4.6 ANTENNA PCB
A
F
SIDE A
ANTENNA PCB
E
F
SIDE B
ANTENNA PCB
ANT1001
20
20
10
10
B
BT ANTENNA
Y
Y
C
0
X
10
20
30
30
20
10
X
0
D
E
F
F
DEH-P55BT/XN/EW5
5
6
7
8
47
1
2
3
4
5. ELECTRICAL PARTS LIST
A
B
NOTE:
• Parts whose parts numbers are omitted are subject to being not supplied.
• The part numbers shown below indicate chip components.
Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
• The > mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Meaning of the figures and others in the parentheses in the parts list.
Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding
PC board.
IC 301 (A, 91, 111) IC NJM2068V
Circuit Symbol and No.
C
D
Unit Number :
Unit Name :
Unit Number :
Unit Name :
Unit Number :
Unit Name :
Unit Number :
Unit Name :
Unit Number :
Unit Name :
Part No.
CWN1485
Tuner Amp Unit
Keyboard Unit
CWM9781
Panel Unit
CWN1908
Bluetooth Unit
CWX3176
CD Core Unit(S10.5COMP1)
A
Unit Number : CWN1485
Unit Name
: Tuner Amp Unit
Part No.
Q 352
Q 381
(B,120,131) Transistor
(A,135,128) Transistor
DTC124EU
2SC4081
Q
Q
Q
Q
Q
403
404
551
552
553
UMH1N
UMH1N
2SD2396
2SB1243
DTC114EU
Q
Q
Q
Q
Q
591
751
752
801
802
(A,5,69) Transistor
DTC314TU
2SD2396
UMD2N
2SA1576
DTC114EU
Q
Q
Q
Q
Q
821
822
831
832
901
(B,34,19)
(A,24,35)
(A,76,19)
(A,72,18)
(B,37,43)
2SD2318F5
UMD2N
2SA1576
DTC124EU
2SD1760F5
Q
Q
Q
D
D
902
921
951
151
152
(A,10,128) Diode
(B,5,133) Diode
UMD2N
UMX1N
2SA1576
DAN202U
DAP202U
D
D
D
D
D
251
252
253
301
381
(A,59,81) Diode
(A,63,82) Diode
(A,65,88) Diode
(A,122,123) Diode
(A,122,127) Diode
UMZ6R8N
UMZ6R8N
UMZ6R8N
1SS133
HZS9L(A2)
D
D
D
D
D
382
433
551
591
651
(A,130,127) Diode
(A,148,24) Diode
(B,21,87) Diode
(A,72,75) Diode
(B,111,47) Diode
DAN202U
1SR154-400
UDZS5R6(B)
1SS355
1SS355
D
D
D
D
D
751
801
802
803
804
(A,14,69) Diode
(B,122,29) Diode
(B,119,25) Diode
(B,128,21) Diode
(B,128,18) Diode
HZS7L(C3)
DAP202U
DAN202U
DAP202U
DAN202U
D
D
D
D
805
806
807
821
(B,111,29) Diode
(B,110,23) Diode
(B,96,19) Diode
(A,18,27) Diode
DAP202U
DAN202U
UMZ6R8EN
HZS9L(B1)
Transistor
Transistor
Transistor
Transistor
Transistor
MISCELLANEOUS
E
IC 101
IC 201
IC 202
IC 351
IC 431
(B,34,115) IC
(A,100,95) IC
(A,73,85) IC
(A,103,138) IC
(B,145,24) IC
HA12241FP
PML015A
BA3131FS
PAL007B
NJM2391DL1-33
IC 451
IC 501
IC 521
IC 541
IC 581
(B,63,54)
(A,97,68)
(A,98,60)
(A,97,54)
(A,40,63)
NJM2391DL1-33
TC74VHCT08AFTS1
TC74VHC08FTS1
S99-50084
AN6123MS
IC 601
IC 651
IC 911
Q 101
Q 301
(A,136,76) IC
(B,120,42) IC
(A,5,118) IC
PEG238A
BD4835G
NJM2388F84
UMF23N
IMH3A
Q 303
Q 304
Q 351
IMH3A
UMD2N
DTC114EU
IC
IC
IC
IC
IC
F
48
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
Part No.
8
Part No.
D 822
(A,17,35) Diode
MPG06G-6415G50
R 216
(B,72,89)
RS1/16S473J
D
D
D
D
D
(A,36,80) Diode
(A,31,52) Diode
(A,64,113) Diode
(A,68,113) Diode
(B,65,124) Diode
MPG06G-6415G50
HZS6L(B1)
HZS7L(C3)
HZS7L(A1)
DAN202U
R
R
R
R
R
217
220
221
222
223
(B,70,81)
(A,70,93)
(A,70,79)
(A,74,91)
(A,73,78)
RS1/16S473J
RS1/16S153J
RS1/16S153J
RS1/16S473J
RS1/16S473J
901
902
921
922
951
D 961
D 962
D 981
D 982
ZNR401
(A,110,117) Diode
MPG06G-6415G50
(A,107,117) Diode
MPG06G-6415G50
(A,45,124) Diode
MPG06G-6415G50
(A,53,116) Diode
MPG06G-6415G50
(A,159,108) Surge Protector RCCA-201Q31UA-PI
R
R
R
R
R
224
225
301
302
305
(A,61,85)
(B,60,84)
(B,138,127)
(B,140,127)
(B,134,138)
RS1/16S223J
RS1/16S223J
RS1/16S821J
RS1/16S821J
RS1/16S223J
L
L
L
L
L
101
401
402
404
601
(B,49,112) Inductor
(B,156,102) Inductor
(A,151,93) Inductor
(A,153,52) Inductor
(A,118,67) Ferri-Inductor
R
R
R
R
R
306
313
314
317
318
(B,139,138)
(B,156,127)
(B,158,127)
(B,148,138)
(B,153,138)
RS1/16S223J
RS1/16S821J
RS1/16S821J
RS1/16S223J
RS1/16S223J
L
L
L
L
X
701
831
951
981
601
(A,109,49) Inductor
LAU2R2K
(A,83,20) Ferri-Inductor
LAU100K
(B,59,126) Inductor
LCTAW2R2J3225
(A,33,105) Choke Coil 600 µH CTH1280
(A,123,76) Crystal Resonator 15.000 MHz CSS1653
R
R
R
R
R
319
351
352
353
354
(A,147,119)
(B,77,132)
(B,124,129)
(B,117,141)
(B,122,139)
RS1/16S102J
RS1/16S153J
RS1/16S103J
RS1/16S103J
RS1/16S331J
(A,72,8) Switch(RESET)
(A,24,9) Switch(DSENSE)
(A,156,123) Fuse 3 A
Fuse 10 A
(A,59,12) Buzzer
CSG1020
CSN1039
CEK1286
CEK1208
CPV1062
R
R
R
R
R
355
381
382
383
384
(B,117,139)
(A,119,133)
(A,120,133)
(A,129,125)
(A,132,126)
RS1/16S101J
RS1/16S104J
RS1/16S473J
RS1/16S472J
RS1/16S473J
Bluetooth Unit
FM/AM Tuner Unit
CWN1908
CWE1951
R
R
R
R
R
405
406
407
408
409
(A,144,50)
(B,157,63)
(B,157,78)
(B,157,80)
(B,157,82)
RAB4C223J
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S681J
R
R
R
R
R
410
411
412
425
426
(B,157,84)
(B,158,89)
(B,158,91)
(B,150,46)
(B,152,41)
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S0R0J
RS1/16S0R0J
R
R
R
R
R
501
502
503
504
505
(B,85,71)
(B,99,69)
(B,98,57)
(B,98,59)
(B,99,64)
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S681J
R
R
R
R
R
506
507
521
522
523
(B,103,66)
(A,91,68)
(A,104,61)
(A,92,61)
(B,129,51)
RS1/16S681J
RS1/16S0R0J
RAB4C681J
RAB4C681J
RS1/16S122J
R
R
R
R
R
524
525
526
527
541
(B,133,52)
(B,135,53)
(B,137,55)
(A,91,66)
(A,103,53)
RS1/16S332J
RS1/16S332J
RS1/16S182J
RS1/16S0R0J
RAB4C101J
R
R
R
R
R
542
543
544
551
552
(A,92,55)
(A,92,56)
(A,92,52)
(B,7,103)
(B,20,82)
RS1/16S101J
RS1/16S101J
RS1/16S0R0J
RS1/16S472J
RS1/16S223J
R
R
R
R
553
556
581
582
(A,14,85)
(A,14,93)
(A,40,69)
(B,36,71)
RD1/4PU332J
RD1/4PU0R0J
RS1/16S105J
RS1/16S332J
S 651
S 802
>FU301
>
SP601
LCTC1R0K1608
LCTAW220J2520
LAU2R2K
LAU2R2K
LAU100K
RESISTORS
R
R
R
R
R
101
102
103
104
105
(B,26,120)
(B,28,123)
(B,25,123)
(B,32,119)
(B,25,128)
RS1/16S102J
RS1/16S102J
RS1/16S223J
RS1/16S223J
RS1/16S181J
R
R
R
R
R
106
107
108
109
110
(B,30,123)
(B,32,123)
(B,57,106)
(B,126,106)
(B,55,108)
RS1/16S181J
RS1/16S222J
RS1/16S101J
RS1/16S101J
RS1/16S102J
R
R
R
R
R
111
112
113
114
115
(B,40,128)
(B,38,128)
(B,40,132)
(B,38,132)
(A,25,122)
RS1/16S101J
RS1/16S101J
RS1/16S470J
RS1/16S150J
RS1/16S332J
R
R
R
R
R
116
151
152
203
204
(A,25,121)
(B,5,137)
(B,3,138)
(B,65,90)
(B,64,82)
RS1/16S562J
RS1/16S102J
RS1/16S102J
RS1/16S473J
RS1/16S473J
R
R
R
R
R
207
208
209
210
211
(B,114,77)
(B,115,75)
(B,65,88)
(B,65,86)
(A,105,106)
RS1/16S103J
RS1/16S103J
RS1/16S473J
RS1/16S473J
RAB4C102J
R
R
R
R
212
213
214
215
(B,68,89)
(B,67,81)
(B,70,89)
(B,68,81)
RS1/16S103J
RS1/16S103J
RS1/16S103J
RS1/16S103J
DEH-P55BT/XN/EW5
5
6
7
8
A
B
C
D
E
F
49
1
A
B
C
D
E
F
2
3
Part No.
4
Part No.
R 584
(A,45,68)
RS1/16S0R0J
R 834
(B,73,19)
RS1/16S472J
R
R
R
R
R
587
596
597
601
602
(B,35,61)
(A,76,76)
(A,82,76)
(A,129,89)
(B,127,80)
RS1/16S0R0J
RS1/16S223J
RS1/16S102J
RS1/16S104J
RS1/16S0R0J
R
R
R
R
R
901
902
903
911
921
(B,20,53)
(B,21,55)
(B,20,51)
(B,7,112)
(B,66,120)
RS1/16S821J
RS1/16S333J
RS1/16S821J
RS1/16S473J
RS1/16S472J
R
R
R
R
R
603
604
605
606
607
(A,132,94)
(A,134,98)
(A,132,98)
(A,134,63)
(A,142,64)
RS1/16S473J
RS1/16S472J
RS1/16S472J
RAB4C681J
RAB4C681J
R
R
R
R
R
922
923
924
925
951
(B,62,120)
(B,76,117)
(B,64,120)
(B,73,119)
(B,83,115)
RS1/16S473J
RS1/16S103J
RS1/16S473J
RS1/16S104J
RS1/16S472J
R
R
R
R
R
608
611
612
613
614
(A,149,74)
(A,130,98)
(A,129,98)
(B,100,61)
(A,137,88)
RAB4C681J
RS1/16S104J
RS1/16S104J
RS1/16S104J
RS1/16S473J
R
R
R
R
R
952
953
954
955
971
(B,86,112)
(B,81,115)
(B,77,117)
(B,60,123)
(B,33,61)
RS1/16S102J
RS1/16S472J
RS1/16S104J
RS1/16S153J
RS1/16S220J
R
R
R
R
R
615
616
618
619
620
(A,132,92)
(A,71,16)
(B,132,84)
(B,130,68)
(B,137,73)
RS1/16S103J
RS1/16S102J
RS1/16S104J
RS1/16S221J
RS1/16S104J
R 972
R 981
(B,28,63)
(A,60,113)
RS1/16S102J
RD1/4PU102J
R
R
R
R
R
641
642
643
651
652
(A,114,57)
(A,117,57)
(A,120,57)
(B,116,43)
(B,112,42)
RS1/16S104J
RS1/16S103J
RS1/16S103J
RS1/16S183J
RS1/16S102J
R
R
R
R
R
701
702
703
704
705
(B,84,38)
(B,84,29)
(B,84,34)
(B,84,40)
(B,84,32)
RS1/16S473J
RS1/16S104J
RS1/16S682J
RS1/16S682J
RS1/16S682J
R
R
R
R
R
706
707
708
709
710
(B,84,36)
(B,101,41)
(B,101,38)
(B,101,43)
(B,101,34)
RS1/16S682J
RS1/16S221J
RS1/16S221J
RS1/16S221J
RS1/16S221J
R
R
R
R
R
712
751
801
803
804
(B,101,36)
(A,14,73)
(B,107,23)
(B,114,22)
(B,118,9)
RS1/16S221J
RD1/4PU102J
RS1/16S222J
RS1/16S222J
RS1/16S222J
R
R
R
R
R
805
806
807
808
809
(B,116,23)
(B,125,20)
(B,119,20)
(B,116,31)
(B,46,8)
RS1/16S222J
RS1/16S222J
RS1/16S332J
RS1/16S102J
RS1/16S102J
R
R
R
R
R
810
811
812
813
814
(B,115,27)
(B,117,27)
(B,109,26)
(B,127,25)
(A,43,20)
RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/16S104J
RD1/4PU391J
R
R
R
R
R
815
816
818
819
820
(B,62,17)
(B,58,20)
(B,105,29)
(B,105,31)
(B,111,35)
RS1/16S473J
RS1/16S103J
RS1/16S222J
RS1/16S222J
RS1/16S222J
R
R
R
R
821
824
831
832
(A,17,32)
(B,44,14)
(B,69,25)
(B,64,25)
RD1/4PU182J
RS1/16S222J
RS1/16S472J
RS1/16S102J
50
CAPACITORS
C
C
C
C
C
103
104
105
106
201
(B,31,136)
(B,37,121)
(B,37,123)
(B,36,119)
(A,90,88)
CKSRYB104K16
CKSRYB102K50
CKSRYB102K50
CKSRYB104K16
CKSRYB105K6R3
C
C
C
C
C
202
203
204
205
206
(A,91,103)
(B,62,90)
(B,60,82)
(B,91,88)
(A,92,105)
CKSRYB105K6R3
CKSRYB105K6R3
CKSRYB105K6R3
CKSRYB224K16
CKSRYB224K16
C
C
C
C
C
207
208
209
210
211
(B,89,97)
(A,94,106)
(B,89,99)
(A,96,106)
(A,84,94)
CKSRYB105K6R3
CKSRYB105K6R3
CKSRYB105K6R3
CKSRYB105K6R3
CEAL470M10
C
C
C
C
C
212
213
214
215
216
(B,95,92)
(A,97,84)
(A,112,86)
(A,70,91)
(A,70,78)
CKSRYB105K10
CEAL100M16
CEAL4R7M16
CCSRCH101J50
CCSRCH101J50
C
C
C
C
C
217
218
219
220
221
(A,74,92)
(A,73,79)
(A,69,97)
(A,76,96)
(B,75,94)
CCSRCH470J50
CCSRCH470J50
CEAL220M10
CEAL100M16
CKSRYB103K50
C
C
C
C
C
222
223
224
225
226
(A,82,85)
(B,105,100)
(B,103,90)
(B,62,88)
(B,62,86)
CEAL101M10
CKSRYB153K50
CKSRYB153K50
CKSRYB105K6R3
CKSRYB105K6R3
C
C
C
C
C
228
229
230
231
233
(B,104,87)
(A,105,84)
(B,91,103)
(B,87,90)
(A,65,81)
CKSRYB105K10
CEAL100M25
CKSRYB105K6R3
CKSRYB105K6R3
CKSRYB104K16
C
C
C
C
234
241
242
243
(A,67,81)
(B,74,89)
(B,72,81)
(A,64,85)
CKSRYB104K16
CCSRCH470J50
CCSRCH470J50
CKSRYB104K16
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
Part No.
8
Part No.
C 301
(A,135,121)
CEAL100M25
C 831
(B,77,24)
CKSRYB473K25
C
C
C
C
C
302
305
306
310
351
(A,135,109)
(A,142,122)
(A,139,114)
(A,128,113)
(A,121,119)
CEAL100M25
CEAL100M25
CEAL100M25
CEAL220M35
CKSRYB474K10
C
C
C
C
C
901
902
903
904
905
(A,27,30)
(A,32,28)
(B,31,55)
(B,28,60)
(A,28,58)
CEAT471M16
CEAT471M16
CKSRYB472K50
CKSRYB103K50
CEJQ101M16
C
C
C
C
C
352
353
354
355
356
(B,110,124)
(A,118,120)
(B,115,124)
(A,123,119)
(A,122,115)
CKSRYB474K10
CKSRYB474K10
CKSRYB474K10
CKSQYB225K10
CKSQYB225K10
C
C
C
C
C
911
912
913
921
951
(A,14,106) 100 µF / 25 V
(B,7,116)
(A,14,98)
(B,68,120)
(B,60,120)
CCH1316
CKSRYB103K50
CEHAR101M10
CKSRYB104K25
CKSRYB104K25
C
C
C
C
C
357
358
359
361
363
(A,128,121)
(B,49,122)
(A,47,124) 3300 µF / 16 V
(A,125,132)
(A,120,115)
CEAL100M25
CKSRYB104K16
CCH1486
CEHAR330M10
CKSQYB474K16
C 961
C 971
(B,105,117)
(A,28,66)
CKSRYB473K25
CEJQ330M10
C
C
C
C
C
364
365
366
403
405
(B,114,120)
(A,118,115)
(B,118,120)
(B,158,59)
(B,163,58)
CKSQYB474K16
CKSQYB474K16
CKSQYB474K16
CKSQYB475K6R3
CKSRYB103K50
C
C
C
C
C
406
407
410
411
432
(B,163,63)
(A,152,59)
(B,163,94)
(A,150,101)
(B,153,26)
CKSRYB103K50
CEJQ470M10
CKSRYB103K50
CEAL101M10
CKSRYB103K50
C
C
C
C
C
433
434
435
451
452
(B,153,23)
(A,151,31)
(A,159,30)
(B,56,49)
(B,59,59)
CKSRYB103K50
CEJQ220M10
CEJQ470M10
CKSRYB103K50
CKSRYB103K50
C
C
C
C
C
453
454
501
521
541
(A,38,58)
(B,56,47)
(A,91,70)
(A,91,64)
(A,92,53)
CEJQ220M16
CKSQYB475K6R3
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
C
C
C
C
C
551
552
553
554
581
(A,25,77)
(B,19,88)
(A,15,79)
(A,24,87) 470 µF / 16 V
(A,44,64)
CEHAR101M10
CKSRYB103K50
CEHAR101M10
CCH1339
CKSYB106K6R3
C
C
C
C
C
582
583
584
602
603
(A,42,68)
(B,40,64)
(B,40,62)
(B,120,65)
(A,119,62)
CKSYB106K6R3
CCSRCH331J50
CKSRYB334K10
CKSRYB103K50
CEAL4R7M50
C
C
C
C
C
604
605
606
651
704
(B,125,78)
(B,125,74)
(B,145,77)
(B,111,52)
(B,106,46)
CCSRCH200J50
CCSRCH180J50
CCSRCH470J50
CKSRYB105K6R3
CKSRYB104K16
C
C
C
C
C
751
752
753
801
802
(B,14,67)
(B,12,57)
(A,14,54)
(B,121,20)
(B,123,20)
CKSRYB473K25
CKSRYB102K50
CEAL101M10
CCSRCH220J50
CCSRCH220J50
C
C
C
C
803
820
821
822
(B,105,21)
(A,43,12)
(A,18,24)
(B,51,11)
CCSRCH220J50
CEJQ1R0M50
CKSRYB104K16
CKSRYB224K16
B
B
Unit Number :
Unit Name
: Keyboard Unit
MISCELLANEOUS
IC 2
IC 3
IC 4
Q 1
Q 2
(B,123,8) IC
(A,6,12) IC
(B,97,20) IC
BU2507FV
TSOP4840SB1
PD6538A
UMX1N
UMX1N
Q
Q
Q
Q
Q
3
4
5
6
7
(B,24,32)
(B,39,34)
(B,54,26)
(B,35,28)
(B,32,34)
UMX1N
UMX1N
UMX1N
UMX1N
UMX1N
Q
Q
Q
Q
Q
8
9
10
11
12
UMX1N
UMX1N
UMX1N
UMX1N
UMX1N
Q
Q
Q
D
D
13
14
90
1
2
(B,107,14) Diode
(B,107,10) Diode
UMX1N
UMX1N
DTC114EU
DAN202U
DAP202U
D
D
D
D
D
3
4
5
6
7
(A,28,32) Chip LED
(A,63,21) Chip LED
(A,103,5) Chip LED
(A,151,21) Chip LED
(A,28,12) Chip LED
NSCM315C-5706
NSCM315C-5706
NSCM315C-5706
NSCM315C-5706
NSCM315C-5706
D
X
S
S
S
90
1
1
2
3
(A,14,39) LED
SML412BC5T(NP)
(B,103,9) Ceramic Resonator 5.00 MHz CSS1547
(A,41,22) Switch(VOLUME) CSX1065
(A,87,7) Push Switch
CSG1155
CSG1155
S
S
S
S
S
4
5
6
7
8
CSG1155
CSG1155
CSG1155
CSG1155
CSG1155
S
S
S
S
S
9
10
11
12
13
CSG1155
CSG1155
CSG1155
CSG1155
CSG1155
Transistor
Transistor
Transistor
Transistor
Transistor
6
C
D
DEH-P55BT/XN/EW5
5
A
7
8
E
F
51
1
A
S 15
S 16
S 17
LCD
2
3
Part No.
CSG1155
CSG1155
CSG1155
CAW1926
RESISTORS
B
C
D
E
4
Part No.
R 61
R 62
(B,150,9)
(B,150,6)
RS1/16S680J
RS1/16S820J
R
R
R
R
R
63
64
65
66
67
(B,148,18)
(B,151,18)
(B,148,16)
(B,151,16)
(B,146,13)
RS1/16S820J
RS1/16S121J
RS1/16S680J
RS1/16S820J
RS1/16S101J
R
R
R
R
R
68
69
70
71
72
(B,141,7)
(B,139,5)
(B,142,13)
(B,137,9)
(A,132,39)
RS1/16S104J
RS1/16S222J
RS1/16S101J
RS1/16S102J
RS1/16S121J
R
R
R
R
R
73
74
75
76
77
(A,129,39)
(A,138,39)
(A,141,39)
(B,133,37)
(B,121,36)
RS1/16S121J
RS1/16S121J
RS1/16S121J
RS1/16S101J
RS1/16S104J
R
R
R
R
R
78
79
80
81
82
(B,133,35)
(B,122,36)
(B,140,14)
(B,44,27)
(B,32,26)
RS1/16S101J
RS1/16S222J
RS1/16S102J
RS1/16S101J
RS1/16S101J
R
R
R
R
R
83
84
85
86
87
(A,57,28)
(B,148,20)
(B,150,20)
(A,57,18)
(A,57,26)
RS1/16S103J
RS1/16S471J
RS1/16S471J
RS1/16S102J
RS1/16S102J
R
R
R
R
R
88
89
90
91
92
(A,57,15)
(A,57,16)
(A,57,29)
(A,20,22)
(A,57,31)
RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S102J
R 93
R 99
(A,15,35)
(B,38,25)
RS1/16S101J
RS1/16S101J
R
R
R
R
R
1
2
3
4
5
(B,45,19)
(B,36,15)
(B,110,13)
(B,110,12)
(B,150,26)
RS1/16S101J
RS1/16S101J
RS1/16S222J
RS1/16S222J
RS1/16S473J
R
R
R
R
R
6
7
8
10
11
(B,122,13)
(B,121,13)
(B,119,13)
(B,4,7)
(B,9,7)
RS1/16S272J
RS1/16S272J
RS1/16S272J
RS1/16S121J
RS1/16S2R2J
R
R
R
R
R
15
16
17
21
22
(B,47,26)
(B,45,23)
(B,47,31)
(B,48,31)
(B,50,26)
RS1/16S820J
RS1/16S121J
RS1/16S101J
RS1/16S101J
RS1/16S680J
R
R
R
R
R
23
24
25
26
27
(B,47,23)
(B,46,36)
(B,35,31)
(B,46,37)
(B,21,33)
RS1/16S820J
RS1/16S104J
RS1/16S101J
RS1/16S222J
RS1/16S121J
R
R
R
R
R
28
29
30
31
32
(B,19,33)
(B,108,7)
(B,21,31)
(B,19,31)
(B,45,31)
RS1/16S121J
RS1/16S102J
RS1/16S121J
RS1/16S121J
RS1/16S101J
R
R
R
R
R
33
34
35
36
37
(B,55,23)
(B,55,20)
(B,49,31)
(B,38,36)
(B,38,37)
RS1/16S820J
RS1/16S121J
RS1/16S101J
RS1/16S104J
RS1/16S222J
R
R
R
R
R
38
39
40
41
42
(B,34,31)
(B,54,23)
(B,54,20)
(B,118,5)
(B,35,25)
RS1/16S101J
RS1/16S680J
RS1/16S820J
RS1/16S102J
RS1/16S820J
C
C
C
C
C
1
4
5
7
8
(B,115,8)
(B,4,9)
(B,108,20)
(B,44,36)
(A,24,33)
CCSRCH100D50
CKSQYB475K6R3
CKSRYB103K50
CKSQYB225K10
CKSRYB104K16
R
R
R
R
R
43
44
45
46
47
(B,36,17)
(B,28,33)
(B,37,25)
(B,38,17)
(B,28,31)
RS1/16S121J
RS1/16S101J
RS1/16S680J
RS1/16S820J
RS1/16S101J
C
C
C
C
C
9
16
17
18
19
(A,24,31)
(B,35,36)
(B,108,17)
(B,129,6)
(A,57,23)
CKSRYB104K16
CKSQYB225K10
CKSRYB105K6R3
CKSRYB105K6R3
CKSRYB104K16
R
R
R
R
R
48
49
50
51
52
(B,29,16)
(B,29,14)
(B,32,36)
(B,32,37)
(B,32,31)
RS1/16S121J
RS1/16S121J
RS1/16S104J
RS1/16S222J
RS1/16S101J
C
C
C
C
C
20
21
22
23
24
(A,57,21)
(B,28,36)
(A,103,7)
(A,99,4)
(B,148,6)
CKSRYB104K16
CKSQYB225K10
CKSRYB104K16
CKSRYB104K16
CKSQYB225K10
R
R
R
R
R
53
54
55
56
57
(B,128,4)
(B,146,11)
(B,146,7)
(B,145,5)
(B,144,13)
RS1/16S102J
RS1/16S101J
RS1/16S104J
RS1/16S222J
RS1/16S101J
C
C
C
C
C
25
26
27
28
29
(A,147,4)
(B,143,5)
(A,147,7)
(B,116,37)
(A,24,12)
CKSRYB104K16
CKSQYB225K10
CKSRYB104K16
CKSQYB225K10
CKSRYB104K16
(B,151,9)
(B,151,6)
(B,136,4)
RS1/16S820J
RS1/16S121J
RS1/16S102J
C 30
C 82
C 83
(A,24,10)
(A,14,38)
(B,126,13)
CKSRYB104K16
CKSRYF104Z50
CKSRYB103K50
CAPACITORS
F
R 58
R 59
R 60
52
DEH-P55BT/XN/EW5
1
2
3
4
5
6
C 89
(B,108,19)
Part No.
CKSRYB103K50
C
Unit Number : CWM9781
Unit Name
: Panel Unit
MISCELLANEOUS
D 1970
S 1970
(A,6,20) LED
CL220PGC
(A,79,41) Push Switch(EJECT) CSG1174
RESISTORS
R 1970
R 1971
(B,19,11)
(B,17,11)
RS1/16S101J
RS1/16S101J
(B,65,7)
CKSRYB104K16
Bluetooth Unit
Consists of
Bluetooh PCB
Antenna PCB
EF
Unit Number : CWN1908
Unit Name
8
Part No.
R
R
R
R
R
1032
1033
1034
1041
1042
(B,11,42)
(B,8,40)
(B,8,42)
(A,23,29)
(A,29,29)
RS1/16S393J
RS1/16S103J
RS1/16S103J
RAB4C101J
RS1/16S104J
R
R
R
R
R
1043
1051
1052
1053
1054
(A,27,29)
(B,6,40)
(A,10,35)
(A,11,35)
(A,13,35)
RS1/16S473J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S681J
RS1/16S0R0J
R
R
R
R
R
1055
1056
1057
1058
1059
(A,14,35)
(A,23,33)
(A,23,35)
(B,29,44)
(A,29,35)
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S0R0J
RS1/16S681J
A
B
CAPACITORS
CAPACITORS
C 1970
7
: Bluetooth Unit
MISCELLANEOUS
IC 1041
Q 1001
Q 1002
Q 1041
Q 1042
(B,18,40)
(B,29,17)
(B,29,20)
(B,29,25)
(B,29,29)
IC
Transistor
Transistor
Transistor
Transistor
AK2301A
DTC124EU
DTC124EU
DTC124EU
DTC124EU
L 1001
L 1041
Y 1001
ANT1001
ANT1101
(B,7,30) Chip Coil
(B,7,32) Inductor
(B,17,21) BT Module
(B,17,3) Connector
(B,9,8) BT Antenna
LCTAW1R0J2520
LCYC2R2K1608
CWX3131
CKS5058
CWX3132
ANT1102
(A,11,17) Connector
CKS5058
C
C
C
C
C
1001
1002
1003
1004
1005
(B,6,10)
(B,6,9)
(B,6,12)
(B,7,14)
(B,7,16)
CCSRCH101J50
CSZS1R0M16
CKSRYB104K50
CKSRYB104K50
CSZS4R7M16
C
C
C
C
C
1006
1007
1010
1021
1022
(B,7,20)
(B,7,18)
(B,26,30)
(B,26,42)
(B,26,40)
CKSRYB104K50
CSZS100M16
CKSRYB104K50
CCSRCH101J50
CCSRCH101J50
C
C
C
C
C
1023
1024
1026
1031
1032
(B,29,42)
(B,29,38)
(B,29,37)
(B,11,40)
(B,11,43)
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CCSRCH101J50
CKSRYB105K10
C
C
C
C
C
1033
1034
1041
1042
1043
(B,8,39)
(B,8,43)
(B,7,34)
(B,7,36)
(B,29,35)
CKSRYB105K10
CKSRYB105K10
CKSRYB104K50
CSZS100M16
CKSRYB105K10
C 1044
(B,29,34)
CKSRYB334K10
D
D
Unit Number : CWX3176
Unit Name
RESISTORS
C
: CD Core Unit(S10.5COMP1)
MISCELLANEOUS
R
R
R
R
R
1001
1002
1003
1004
1005
(A,21,16)
(A,7,12)
(A,21,14)
(A,9,15)
(A,7,17)
RS1/16S681J
RS1/16S0R0J
RS1/16S681J
RS1/16S103J
RS1/16S0R0J
R
R
R
R
R
1006
1007
1008
1009
1010
(A,28,21)
(B,9,25)
(A,9,22)
(A,28,23)
(A,28,26)
RS1/16S103J
RS1/16S0R0J
RS1/16S103J
RS1/16S473J
RS1/16S334J
R
R
R
R
R
1021
1022
1023
1024
1031
(B,25,42)
(B,25,40)
(B,29,41)
(B,29,40)
(B,11,39)
RS1/16S203J
RS1/16S203J
RS1/16S103J
RS1/16S103J
RS1/16S393J
IC 201
IC 203
IC 301
IC 701
Q 101
(B,39,70)
(A,12,16)
(A,28,18)
(A,32,48)
(B,60,89)
IC
IC
IC
IC
Transistor
Q
X
X
S
S
(B,24,41)
(B,28,57)
(A,24,37)
(A,57,57)
(B,23,78)
Transistor
UN2111
Ceramic Resonator 16.934 MHz CSS1603
Ceramic Resonator 4.000 MHz CSS1652
Switch(HOME) CSN1067
Switch(DSCSNS) CSN1067
701
201
701
901
903
S 904
S 905
(B,42,87) Switch(12EJ)
(B,28,88) Switch(8EJ)
UPD63763CGJ
NJM2886DL3-33
BA5835FP
PE5505A
2SA1577
CSN1068
CSN1068
F
RESISTORS
DEH-P55BT/XN/EW5
5
6
E
7
8
53
1
A
B
2
3
Part No.
R
R
R
R
R
101
102
103
104
201
(B,61,92)
(B,63,92)
(B,63,89)
(A,52,73)
(B,44,57)
RS1/10SR2R4J
RS1/10SR2R4J
RS1/10SR2R7J
RS1/16SS102J
RS1/16SS102J
R
R
R
R
R
202
203
214
216
221
(A,38,62)
(A,37,62)
(A,46,79)
(A,46,81)
(A,44,81)
RS1/16SS473J
RS1/16SS473J
RS1/16SS472J
RS1/16SS472J
RS1/16SS103J
R
R
R
R
R
222
225
226
227
228
(A,45,81)
(B,52,78)
(B,52,77)
(A,44,75)
(A,46,72)
RS1/16SS103J
RS1/16SS103J
RS1/16SS393J
RS1/16SS562J
RS1/16SS122J
R
R
R
R
R
229
232
241
243
245
(A,44,72)
(A,46,75)
(B,26,63)
(B,26,62)
(B,26,69)
RS1/16SS472J
RS1/16SS122J
RS1/16SS333J
RS1/16SS333J
RS1/16SS333J
R
R
R
R
R
248
307
308
309
310
(B,55,74)
(A,19,20)
(A,17,20)
(A,18,18)
(A,17,16)
RS1/16SS105J
RS1/16SS183J
RS1/16SS183J
RS1/16SS183J
RS1/16SS183J
R
R
R
R
R
601
602
606
701
707
(B,30,47)
(B,28,50)
(B,20,54)
(B,26,44)
(B,32,45)
RS1/16S101J
RS1/16S101J
RS1/16S0R0J
RS1/16SS221J
RS1/16SS473J
R
R
R
R
R
709
710
712
713
716
(A,36,35)
(B,41,46)
(A,45,57)
(B,40,57)
(B,29,37)
RS1/16SS222J
RS1/16SS102J
RS1/16SS222J
RS1/16SS222J
RS1/16SS472J
R
R
R
R
R
724
726
727
729
730
(B,31,36)
(B,23,47)
(B,31,42)
(B,20,48)
(B,20,46)
RS1/16S473J
RS1/16SS103J
RS1/16SS473J
RS1/16SS223J
RS1/16SS473J
R
R
R
R
R
740
746
750
902
905
(A,38,59)
(A,13,38)
(A,40,66)
(A,20,36)
(A,21,36)
RS1/16SS222J
RS1/16SS104J
RS1/16SS473J
RS1/16SS221J
RS1/16SS221J
R
R
R
R
906
907
908
911
(B,20,36)
(B,16,62)
(B,16,64)
(B,20,32)
RS1/16SS221J
RS1/16SS0R0J
RS1/16SS0R0J
RS1/16SS0R0J
C
D
E
4
Part No.
C 216
(B,53,77)
CKSSYB332K50
C
C
C
C
C
217
218
219
220
221
(B,52,79)
(B,52,76)
(B,52,74)
(A,46,77)
(B,51,74)
CKSSYB104K10
CKSSYB473K10
CKSSYB104K10
CKSSYB182K50
CKSSYB104K10
C
C
C
C
C
222
223
224
225
226
(A,46,73)
(A,44,74)
(B,52,68)
(A,47,67)
(A,49,67)
CCSSCH560J50
CCSSCH4R0C50
CKSSYB104K10
CKSSYB103K16
CCSSCH680J50
C
C
C
C
C
227
228
232
237
239
(A,48,65)
(A,46,62)
(A,12,31)
(A,31,67)
(A,46,74)
CCSSCH470J50
CKSSYB103K16
CKSRYB105K10
CKSSYB104K10
CCSSCH220J50
C
C
C
C
C
246
250
251
303
304
(A,42,80)
(A,42,81)
(A,41,83)
(A,18,20)
(A,17,17)
CKSSYB104K10
CKSRYB102K50
CKSRYB102K50
CKSSYB472K25
CKSSYB103K16
C
C
C
C
C
307
308
601
602
701
(A,34,15)
(A,17,30)
(B,25,50)
(B,26,51)
(B,25,47)
CKSSYB104K10
CKSRYB105K10
CCSRCH102J50
CCSRCH102J50
CKSSYB104K10
C
C
C
C
C
703
706
707
714
722
(B,28,42)
(B,34,43)
(A,36,57)
(A,24,41)
(B,29,45)
CKSSYB103K16
CKSSYB104K10
CKSSYB104K10
CKSSYB104K10
CKSQYB475K6R3
C 903
C 907
(B,14,54)
(B,14,62)
CKSSYB471K50
CKSSYB103K16
Miscellaneous Parts List
Pickup Unit(P10.5)(Service) CXX1942
Motor Unit(SPINDLE)
CXC6742
Motor Unit(LOADING/CARRIAGE) CXC4026
M 1
M 2
CAPACITORS
F
C
C
C
C
C
103
108
201
202
204
(B,57,83)
(A,47,66)
(B,46,56)
(B,47,58)
(B,35,48)
CEVW101M16
CKSSYB104K10
CKSSYB102K50
CKSSYB104K10
CEVW220M6R3
C
C
C
C
205
208
209
210
(A,34,63)
(B,34,54)
(B,31,57)
(A,31,66)
CKSSYB104K10
CKSSYB104K10
CKSSYB104K10
CKSRYB105K10
54
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
6. ADJUSTMENT
6.1 CD ADJUSTMENT
A
1) Cautions on adjustments
• In this product the single voltage (3.3V) is used for the
regulator. The reference voltage is the REFO1 (1.65V)
instead of the GND.
If you should mistakenly short the REFO1 with the GND
during adjustment, accurate voltage will not be obtained,
and the servo’s misoperation will apply excessive shock
to the pickup. To avoid such problems:
a. Do not mix up the REFO1 with the GND when
connecting the (-) probe of measuring instruments.
Especially on an oscilloscope, avoid connecting the (-)
probe for CH1 to the GND.
b. In many cases, measuring instruments have the same
potential as that for the (-) probe. Be sure to set the
measuring instruments to the floating state.
c. If you have mistakenly connected the REFO1 to the GND,
turn off the regulator or the power immediately.
• Before mounting and removing filters or leads for
adjustment, be sure to turn off the regulator.
• For stable circuit operation, keep the mechanism
operating for about one minute or more after the
regulator is turned on.
2) Test mode
This mode is used to adjust the CD mechanism module.
• To enter the test mode.
When +Battery and ACC are ON, push 4 and 6 keys simultaneously.
• To exit from the test mode.
Turn off the ACC and +Battery.
Notes:
a. During ejection, do not press any other keys than the
EJECT key until the loaded disc is ejected.
b. If you have pressed the (→) key or (←) key during focus
search, turn off the power immediately to protect the
actuator from damage caused by the lens stuck.
c. For the TR jump modes except 100TR, the track jump
operation will continue even if the key is released.
d. For the CRG move and 100TR jump modes, the tracking
loop will be closed at the same time when the key is
released.
e. When the power is turned off and on, the jump mode
is reset to the single TR (91), the RF amp gain is set to 0dB,
and the auto-adjustment values are reset to the default
settings.
B
C
• In the test mode, any software protections will not
work. Avoid applying any mechanical or electrical
shock to the mechanism during adjustment.
• The RFI and RFO signals with a wide frequency range
are easy to oscillate. When observing the signals,
insert a resistor of 1k ohms in series.
• The load and eject operation is not guarantied with the
mechanism upside down. If the mechanism is blocked
due to mistaken eject operation, reset the product or
turn off and on the ACC to restore it.
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
55
1
2
3
4
- Flow Chart
[Key]
[4] + [6] +
BU & ACC ON
Test Mode In
Contents
A
Display
[CD] or [SOURCE]
Source On
TRK
MIN
SEC
[3]
[BAND]
Power On
(T.Offset is adjusted)
TRK MIN SEC
00
[BAND]
TRK
MIN
SEC
[BAND]
MIN
SEC
[BAND]
Power Off
TRK
MIN
91
91
[1]
T.Close & AGC
Applicable servomechanism
Power Off
SEC
99
99
99
TRK
MIN
SEC
[2]
[4]
RF AMP *1
Gain switching
TRK MIN SEC
SPINDLE *9
Speed switching
TRK MIN SEC
GG
[6]
Focus Close
S curve check
TRK MIN SEC
91
TRK
00
[3]
Power Off
B
00
Power On
(T.Offset is not adjusted)
TRK MIN SEC
GG
GG
SP
[1]
Focus Mode switching
*2
TRK
MIN
SEC
0X
0X
0X
[6]
[3]
[<]
CRG -
*8
00 00 00
or 99 99 99
*8
00 00 00
or 99 99 99
8X 8X 8X
or 9X 9X 9X
8X 8X 8X
or 9X 9X 9X
[>]
[<]
[3]
[6]
F,T AGC / F.Bias
RF AGC
TRK MIN SEC
CRG/TR jump
value switching
TRK MIN SEC
TRK
?tr ?min ?sec
?tr ?min ?sec
?tr ?min ?sec
??
??
*5
CRG/TR Jump -
*4
*4
SEC
TRK
??
??
OL
OL
OL
T.Balance adjustment /
T.BAL coefficient display
TRK MIN SEC
??
??
??
[2]
CRG/TR Jump +
MIN
Gop Mode *10
Gop Mode switching
TRK MIN SEC
[2]
CRG -
[1]
??
??
??
[<]
?tr ?min ?sec
[5]
Self-adjusting
switching *3
MIN SEC
TRK
CRG +
?tr ?min ?sec
F,T,RF AGC*7
F.Bias display switching
TRK MIN SEC
??
[2]
CRG +
[>]
RF AGC /
RF AGC coefficient display
TRK MIN SEC
??
SP
[>]
Tracking Servo
Close
00 00 00
or 99 99 99
T.Close
Applicable servomechanism
TRK MIN SEC
SP
MIN
Tracking Open
SEC
?tr ?min ?sec
C
8X 8X 8X
or 9X 9X 9X
*6
[BAND]
[2]
Power Off
TRK
MIN
*1)
Tracking Open
→
TYP
TRK
MIN
8X 8X 8X
or 9X 9X 9X
SEC
SEC
TRK
+ 6 dB
→
06MIN06SEC06
TRK
+ 12 dB
12MIN12SEC12
*2) Focus Close → S Curve check setting → F EQ measurement setting
TRK
TRK
TRK
00MIN00SEC00
01MIN01SEC01
02MIN02SEC02
(TRK99MIN99SEC99)
D
[Key]
[BAND]
[>]
[<]
[1]
*3) F.Offset Display → RF.Offset → T.Offset Display → Switch to the
order of the original display
[2]
[3]
*4) 1TR/4TR/10TR/32TR/100TR
*5) Single → 4TR → 10TR → 32TR → 100TR → CRG Move
9x(8x):91(81) 92(82)
93(83)
94(84)
95(85)
96(86)
[4]
*6) Only at the time of CRG move, 100TR jump
[5]
*7) TRK/MIN/SEC → F.AGC → T.AGC Gain → F.Bias → RF AGC
E
[6]
Operation
Test Mode
Power On/Off
CRG + / TR Jump +
(Direction of the external surface)
CRG - / TR Jump (Direction of the internal surface)
T. CLS & AGC & Applicable servomechanism /
AGC,AGC display setting
RF Gain switching / Offset adjustment display /
T.Balance adjustment / T. Open
F. Close,S Curve / Rough Servo and RF AGC /
F,T,RF AGC
SPDL 1X/2X switching
As for the double speed(2x), audio output cannot be
supported.
Error Rate measurement
ON : ERR 30Counts Start
BER display data[%]
F. Mode switching / Tracking Close / CRG•TR
Jump Switching
*8) CRG motor voltage = 2 [V]
*9)
TYP (1X)
TRK
MIN
SEC
→
TRK
2X
→
22MIN22SEC22
TRK
1X
11MIN11SEC11
*10)
OFF(TYP)
TRK
MIN
SEC
→
FORCUS
→
70MIN70SEC70
TRK
TRACKING
71MIN71SEC71
TRK
• As for the double speed (2x), audio output cannot be supported
*) • After the [Eject] key is pressed keys other than the [Eject] key should not be pressed, until disc ejection is complete.
• When the key [2] or [3] is pressed during the Focus Search, the power supply should be immediately turned off (otherwise the lens
sticks to Wall, causing the actuator to be damaged).
• In the case of TR jump other than to 100TR, the function shall continue to be processed even if the TR jump key is released. As for
the CRG Move and 100TR Jump, the mechanism shall be set to the Tracking Close mode when the key is released.
• When the power is turned on/off the jump mode is reset to the Single TR (91) while the gain of the RFAMP is reset to 0 dB. At the
same time all the self-adjusting values shall return to the default setting.
F
56
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT
A
• Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.
• Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
• Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.
• Method :
• Measuring Equipment
• Measuring Points
• Disc
• Mode
B
• Oscilloscope, Two L.P.F.
• E, F, REFO1
• TCD-782
• TEST MODE
C
E
L.P.F.
REFO1
E
F
Xch
100kΩ
F
Oscilloscope
390pF
VREF
Ych
100kΩ
390pF
VREF
L.P.F.
D
• Checking Procedure
1. In test mode, load the disc and switch the 3V regulator on.
2. Using the → and ← buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase
difference is within 75° . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the
mechanism should be judged to be at fault.
• Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
• Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
E
F
DEH-P55BT/XN/EW5
5
6
7
8
57
1
2
3
4
Ech → Xch 20mV/div, AC
Fch → Ych 20mV/div, AC
Grating waveform
A
0°
30°
45°
60°
75°
90°
B
C
D
E
F
58
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
6.3 ERROR MODE
- Error Messages
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of
the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from
the users and also for facilitating trouble analysis and repair work in servicing.
A
(1) Basic Indication Method
1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN
(minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO
remains in blank as before.
2) Head unit display examples
Depending on display capability of LCD used, display will vary as shown below. xx contains the error number.
8-digit display
ERROR–xx
6-digit display
ERR–xx
B
4-digit display
E–xx
(2) Error Code List
Displayed error code Description of the code and potential cause(s)
Code Class
Electricity Carriage Home NG
CRG can't be moved to inner diameter.
10
CRG can't be moved from inner diameter.
SERVO LSI Com→ Failure on home switch or CRG move mechanism.
munication Error
C
11
Electricity
Focus Servo NG
Communication error between microcomputer and SERVO LSI.
Focusing not available.
→ Stains on rear side of disc or excessive vibrations on REWRITABLE.
12
Electricity
Spindle Lock NG
Subcode NG
Spindle not locked. Sub-code is strange (not readable).
→ Failure on spindle, stains or damages on disc, or excessive vibrations.
A disc not containing CD-R data is found.
17
Electricity
Setup NG
Turned over disc are found, though rarely.
CD signal error.
AGC protection doesn't work. Focus can be easily lost.
→ Damages or stains on disc, or excessive vibrations on REWRITABLE.
30
Electricity
Search Time Out
Failed to reach target address.
→ CRG tracking error or damages on disc.
44
Electricity
ALL Skip
50
Mechanism CD On Mech Error
Skip setting for all track.
(CD-R/RW)
Mechanical error during CD ON.
→ Defective loading motor, mechanical lock and mechanical sensor.
A0
System
Power Supply NG
D
Power (VD) is ground faulted.
→ Failure on SW transistor or power supply (failure on connector).
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors).
Unreadable TOC does not constitute an error. An intended operation continues in this case.
Upper digits of an error code are subdivided as shown below:
E
1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.
F
DEH-P55BT/XN/EW5
5
6
7
8
59
1
2
3
4
6.4 BLUETOOTH TEST MODE
- About Memory Clear
A
When resetting the microprocessor, the memory is initialized except for the following four items.
This enables user to avoid the task of registering phones and transfering phone directory again even after resetting
system at the time of battery exchange, etc.
• Registration of phone
• Phone directory
• History of sending/arrival
• Dial preset
B
C
D
E
F
60
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
- Specification of Service Test Mode Functions (for use with a BT-supporting mobile phone)
Specification of a Mobile Phone with a built-in BT function
A mobile phone which supports Bluetooth Ver.1.2 and incorporates HFP and OPP is the minimum requirement.
Preferably, select a phone type for which connection has been satisfactory verified.
[6230(Nokia), SonyEricsson(Z600), etc.]
A type with connection waiting function is desirable.
A
1. Instructions
* The followings are practical instructions for connecting a mobile phone at a service site.
With the conventional specification, when an actual mobile phone is connected for operation check while maintenance
at a repair site, “BUP off” caused clear of the memory. But, with the specification of this time, “BUP off” does not clear
the memory, because the phone directory registered by the user is maintained.
If you connect an actual mobile phone for operation check or some other purpose at the service site and then return the
product to the user as it is, information of the telephone set registered at the service site will be left in the product.
Therefore, if you have connected an actual mobile phone for operation check, etc. at site, you have to clear only
information on the mobile phone used for the service from the FUNCTION Menu.
Please provide description on this matter in your operation manual.
B
[ Important ]
Note that, in accordance with the specification change in Memory Clear, registerable numbers 1 – 5 and “Guest”
register numbers that the user has already registered (or telephone number information registered by the user, if a
mobile phone is connected to “Guest”), are overwritten.
2. Overview of the Functions
You can use a BT-supporting mobile phone to check BT operation in a simple method.
The following three points shall be checked in the test mode:
• Bluetooth Connection (authentication connection and voice connection) Check
• BT Antenna Sensitivity (Connection) Check
• FLASH Memory Operation Check
C
3. Configuration Scheme
DEH-P55BT
Bluetooth
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
61
1
2
3
4
4. How to start-up the Test Mode
Operation Specification
A
Operation Method
Screen
When +Battery and ACC are ON, push 1 and
3 buttons simultaneously.
B T
Press the PHONE key to turn on the telephone
source and start the test.
Start the BT periphery scan (BT equipment is
scanned only in Category AG).
Erasure of the FLASH memory -> Writing ->
Reading -> Implementation of Erasure & Display
of the result
B
C
:
P H O N E
D
I
S P
1
S A R
C H
*
F O
B
T
Completion of the BT periphery scan: Display of
the name of the first detected device (jig).
A
F O
*
*
*
*
*
*
*2
“UP” key to determine the device (jig): Start of
connection.
A
F O
C
O N E C T
I
N G
*3
Detection of the BT Antenna Sensitivity Level &
Completion of the BT connection
A x
x
F O
C
O N E C T : O F F
*4
A x
x
F O
C
O N E C T : N G
*
*
[NOTE]
D
*1 :
A: Antenna Sensitivity, F: Flash TEST “O or N display”
*2 :
Display of the Device Name: If two or more devices, select with the left/right keys.
If search is NG, go to BT Error Display.
*3 :
If registration & connection are NG, go to BT Error Display.
*4 :
x x : Value of antenna sensitivity
The numeric value serves only as a guide.
If you place a mobile phone in front of the product, the display shows about 30 – 60.
If you get a different value or no display at all, BT antenna connection is not good.
F
62
*1
A
BT Error Display
E
+ 3
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
- Specification of Service Test Mode Functions (for use with a 2.4GHz spectrum analyzer)
1. Instructions
* If there is a 2.4GHz spectrum analyzer at site, the following periphery equipments are needed at the same time.
The antenna terminal of the BT unit must be directly cable-connected at the spectrum analyzer.
Take out the upper case and CD Mechanism Module of the product, and disconnect the white coaxial cable connected
to the antenna connector of the BT unit. Here, a special connector-pulling-out jig will help you to work safely.
Then, connect the U.FL connector from the spectrum analyzer. Note that you need to pay attention to the styling of
the cable when performing this. Otherwise, the BT antenna connector may be damaged if a load is applied to it.
A
2. Overview on Functions
The following confirmation is to be conducted by test mode in order to simply check BT actions using 2.4GHz-compliant
apectrum analyzer.
* Confirmation of output level of Bluetooth unit
B
3. Configuration Scheme
2.4GHz-compliant spectrum analyzer
DEH-P55BT
C
A
Remove CD Mechanism
Module and connect to ANT
connector inside Bluetooth
unit
C
D
B
A: U.FL-SMA conversion adapter
(Hirose Electric Co., Ltd
CL311-0301-5)
B: Coaxial cable for SMA microwave
(Stack Electronics Co., Ltd. SMA • P-100-STF358)
C: SMA conversion connector
(Stack Electronics Co., Ltd. BA057)
E
F
DEH-P55BT/XN/EW5
5
6
7
8
63
1
2
3
4
4. How to start-up the Test Mode
Operation Specification
A
Operation Method
Screen
PHONE
When +Battery and ACC are ON, push 4 and
6 buttons simultaneously, and then start the
BT Test Mode using the PHONE Key.
B T
H S P
T E S T
L O C A L
Upon decision with the “OFF HOOK” key, you go
to Frequency Selection. The initial value is
2402MHz.
T X
F R E Q
0 2
2
Decide with the “OFF HOOK” key.
LOC NM Setting Confirmation Screen: Setting of
the product is now completed.
Measure the output level of each frequency using
the spectrum analyzer with the above mentioned
connection.
Judgment criteria: the product is assumed OK, if
the output level V is within the following range:
“-6 dBm < V < 4 dBm”
S E L
*2
Mode selection using the left/right keys: Select
“LOC NM” (no data modulation).
Use the UP/DOWN keys to select the frequency.
The initial value is 2402MHz.
02: 2402 <--> 41:2441 <--> 80: 2480 <--> 95:2495
C
T E S T
*1
3 seconds after Test Mode Start-up: it goes to the
Test Mode Selection Screen
Display of HSP_Connect_TEST Mode with initial
values
B
-
T 0
2
N M
S E L
4 0 2
R
-
*3
DISP
S
-
H
-
P
-
D
[NOTES]
*1 : “PEE” Sound 1 comes out and display
of “BT-TEST” is shown for 3 seconds.
*2 : After display of “BT-TEST”, the screen
changes automatically.
HSP is abbreviation of HEAD_SET_
PROFILE.
E
*3 : In measurement, each of 02, 41, and 80
is measured.
Go back to SEL Screen using the BAND
key.
F
64
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
6.5 SYSTEM MICROCOMPUTER TEST PROGRAM
A
- PCL Output
In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode
cancelled), shift the STEST1 (Pin 86) terminal to H.
The clock signal is output from the PCL1 terminal (Pin 37).
The frequency of the clock signal is 468.75kHz that is one 32th of the fundamental frequency.
The clock signal should be 468.75kHz ± 19Hz.
If the clock signal is out of the range, the X'tal (X601) should be replaced with new one.
B
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
65
1
2
3
4
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A
7.1.1 DISASSEMBLY
- Removing the Case (not shown)
1. Remove the Case.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1)
1
Remove the four screws.
B
1
Disconnect the connector and then remove the
CD Mechanism Module.
1
1
C
1
Fig.1
- Removing the Grille Assy (Fig.2)
D
1
Disconnect the Cord Assy by Jig GGF1539.
2
Remove the two screws and then remove
the Grille Assy.
3
1
E
2
2
Cord Assy
Grille Assy
Fig.2
F
66
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
When unplugging the cord assy, make sure to use jig GGF1539.
If the antenna cable is directly unplugged without using jig GGF1539, you might damage your fingertip or fingernail.
A
- How to Remove the Cord Assy
When unplugging cord assy, hook the point of jig GGF1539 on the lid of cord assy and vertically draw out
along with the engagement axis of connector.
GGF1539
1
Cord Assy
B
Fig.3
2
Connector
- How to Attach the Cord Assy
For inserting cord assy, adjust cord assy with the engagement axis of connector and insert it as vertically
as possible.
Do not insert the cord assy in extreme slant, as the connector might suffer damage.
C
- Removing the Tuner Amp Unit (Fig.4)
1
Remove the screw.
2
2
2
Remove the three screws.
3
Straighten the tabs at three locations
indicated.
4
Remove the screw and then remove
the Tuner Amp Unit.
2
D
4
1
E
3
3
3
Tuner Amp Unit
Fig.4
F
DEH-P55BT/XN/EW5
5
6
7
8
67
1
2
3
4
- Removing the Bluetooth Unit (Fig.5)
A
1
Remove the solder.
2
Remove the solder.
1
Straighten the three tabs, and then remove the
Bluetooth Unit.
2
2
2
B
Bluetooth Unit
Fig.5
C
D
E
F
68
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
- How to hold the Mechanism Unit
1. Hold the Upper and Lower Frames.
2. Do not hold the front portion of the Upper
Frame, because it is not very solid.
A
B
Do not squeeze this area.
- Removing the Upper and Lower Frames
1. With a disc inserted and clamped in the
mechanism, remove the two Springs (A),
the six Springs (B), and the four Screws.
2. Turn the Upper Frame using the part "a" as
a pivot, and remove the Upper Frame.
3. While lifting the Carriage Mechanism,
remove it from the three Dampers.
Caution: When assembling, be sure to apply
some alcohol to the Dampers and assemble
the mechanism in a clamped state.
a
B
Upper Frame
B
C
B
B
B
B
A
Damper
D
Damper
A
Carriage Mechanism
Lower Frame
E
F
DEH-P55BT/XN/EW5
5
6
7
8
69
1
2
3
4
- How to remove the CD Core Unit
Shorting Solder
1. Apply Shorting Solder to the flexible cable of
the Pickup, and disconnect it from the
connector.
2. Unsolder the four leads, and loosen the
Screw.
3. Remove the CD Core Unit.
Caution: When assembling the CD Core Unit,
assemble it with the SW in a clamped state
so as not to damage it.
A
Screw
B
CD Core Unit
Solder
- How to remove the Pickup Unit
1. Make the system in the carriage mechanism mode, and have it clamped.
2. Remove the CD Core Unit and remove the leads from the Inner Holder.
3. Remove the Poly Washer, Change Arm, and Pickup Lock Arm.
4. While releasing from the hook of the Inner Holder, lift the end of the Feed Screw.
Caution: When assembling, move the Planet Gear to the load/eject position before setting the Feed Screw in the Inner
Holder.
Assemble the sub unit side of the Pickup, taking the plate (Chassis) in-between. When treating the leads of the Load
Carriage Motor Assy, do not make them loose over the Feed Screw.
C
Poly Washer
Change Arm
Pickup Lock Arm
Inner Holder
Feed Screw
D
Planet Gear
Pickup Rack
Chassis
E
Pickup
F
70
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
7.1.2 CONNECTOR FUNCTION DESCRIPTION
A
B
POWER SUPPLY, SPEAKER
FRONT OUTPUT
IP-BUS
AUX IN
SUBWOOFER OUTPUT OR
REAR OUTPUT
C
MIC
ANTENNA JACK
WIRED REMOTE
CONTROL
POWER SUPPLY, SPEAKER
IP-BUS
8 9 10 11
1
2
3
4
5
6
1. FR+
2. RR+
3. FR4. RR5. FL+
6. RL+
7. FL8. RL-
7
9
11 13
8 10 12 14
15
16
9. TEL MUTE
10. NC
11. B.REM
12. NC
13. NC
14. ACC
15. GND
16. BACKUP
5 6
7
1 2 3 4
1. BUS+
2. GND
3. GND
4. NC
5. BUS6. GND
7. BUS L+ INPUT
8. ASENB
9. BUS R+ INPUT
10. BUS R- INPUT
11. BUS L- INPUT
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
71
1
2
3
4
7.2 PARTS
7.2.1 IC
TC74VHCT08AFTS1
TC74VHC08FTS1
NJM2388F84
PAL007B
A
PEG238A
AK2301A
PD6538A
BU2507FV
PML015A
S99-50084
AN6123MS
HA12241FP
PE5505A
NJM2886DL3-33
UPD63763CGJ
*TC74VHCT08AFTS1
*TC74VHC08FTS1
B
C
D
1A 1
14 VCC
1B 2
13 4B
1Y 3
12 4A
2A 4
11 4Y
2B 5
10 3B
2Y 6
9 3A
GND 7
8 3Y
IC's marked by * are MOS type.
Be careful in handling them because they are very
liable to be damaged by electrostatic induction.
NJM2388F84
VOUT
VIN
E
Bandgap
Reference
Cont
+
-
1234
ON/OFF
control
Over Voltage
Protection
1.VIN
2.VOUT
3.GND
4.ON/OFF CONTROL
Thermal
Over Current
Protection Protection
GND
F
72
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
PAL007B
sw_vcc
A
Protector;
Over voltage
1
TAB
Reference
amp_vcc
2
OUT2-
3
5
VCC
6
OUT1-
7
8
OUT1+
9
SVR
10
IN1
B
11
Offset
Detection
-+
P-GND1
Protector;
Thermal
+-
4
OUT2+
Offset
Detection
-+
STBY
Stand-by
Circuit
+-
P-GND2
C
13
IN4
14
IN3
15
AC-GND
16
OUT3+
17
19
VCC
20
OUT4+
21
22
OUT4-
23
P-GND4
24
SWITCH
25
Offset
Detection
-+
MUTE
D
Offset
Detection
+-
18
OUT3-
Protector;
Short circuit
-+
P-GND3
amp_vcc
12
S-GND
+-
IN2
E
sw_vcc
stby
Protector;
Over current limit
Mute circuit
F
DEH-P55BT/XN/EW5
5
6
7
8
73
74
1
IN3_R
IN2_R
IN1_R
2
(
MID
M.S.
BASS
Auto
Zero
M.S.S.
LOUDNESS
Gain
Adjuster
)
Anti-Alias
Filter
Volume
Primary
HPF
CLK
STB
DATA
Filter
Radiation
Anti-
AntiRadiation
Filter
Digital
Block
Volume
Secondary
Volume
Secondary
Volume
Secondary
Volume
Secondary
Volume
Secondary
Vref
Vcc
GND
FIE
FIE
&
Reference
Supply
Rear_R
FIE_R
Front_R
Rear_L
FIE_L
Front_L
Pre/SW_R
Pre/SW_L
Vp
Pref
PGND
2
Input Selector
Soft step Blocks
TRE
Isolator
IN4-_R
IN4+_R
E
Isolator
D
IN4+_L
IN4-_L
LM_out
Level Meter
A
Phase inv.
LPF
IN1_L
IN2_L
IN3_L
1
3
- Block Diagram
3
4
PML015A
- Pin Layout
B
C
IN1_L 1
28 IN1_R
IN2_L 2
27 IN2_R
IN3_L 3
26 IN3_R
IN4+_L 4
25 IN4+_R
IN4-_L 5
24 IN4-_R
Front_L 6
23 Front_R
Rear_L 7
22 Rear_R
Vcc 8
21 STB
Vref 9
20 CLK
GND 10
19 DATA
FIE_L 11
18 FIE_R
Pre/SW_L 12
17 Pre/SW_R
Vp 13
16 LMout
Pref 14
15 PGND
F
DEH-P55BT/XN/EW5
4
5
6
7
S99-50084
8
AN6123MS
INPUT GND OUTPUT
CS#
1
SO
2
W#
3
SCK :Serial clock input
:Serial data input
SI
SO :Serial data output
CS# :Chip select input
HOLD :Hold input
VCC :Supply voltage input
GND :Ground
GND 4
8
VCC
7
HOLD#
6
SCK
5
SI
3
4
DET
A
5
gm
B
2
1
DET
VCC
C
HA12241FP
stb
8
VCC
7
-BUS
5
+BUS
6
BIAS
DRIVER
OUTPUT
(current)
+
-
+
RECEIVER
OUTPUT
COM
-
1
S1
D
2
R out
3
S2
4
GND
E
F
DEH-P55BT/XN/EW5
5
6
7
8
75
1
- Pin Functions(PEG238A)
Pin No.
Pin Name
1
SYSPW
2
KEYD
3
BSO
4
BSI
5
BSCK
6
BYTE
7
CNVSS
8
TELIN
9
NC
10
reset
11
XOUT
12
VSS
13
XIN
14
VDD
15
nmi
16
rck
17
ldet
18
NC
19
RX2
20
SEL1
21
SEL2
22
PEE
23
NC
24
brst
25
brxen
26
brsq
27
RX
28
TX
29
DPDT
30
KYDT
31
TSCK
32
BTCTS
33
BTTX
34
BTRX
35
NC
36
BTRTS
37
PCL
38
SWVDD
39
DSENS
40
FLPILM
41
ILMPW
42
ejtin
43
NC
44
rds%&k
45
rdslk
46
RDT
47
BTTEST
48
BTPW
49
BTRST
50
MEMCS
51
MEMWP
52
RGBCK
53
RGBST
54
RGBDT
55
RECIVE
56
CSENSOUT
57
TUNPDI
A
B
C
D
E
2
I/O
O
I
O
I
O
I
I
I
I
O
I
I
I
I
I
I
O
O
O
O
I/O
I
I
O
O
I
O
I
O
I
O
O
O
I
O
O
I
I
I
I
O
O
O
O
O
I
O
O
O
O
I
3
4
Function and Operation
System
y
power control output
p
p
Key
y data input
p
P-BUS : Serial data output
p
P-BUS : Serial data input
P-BUS : Serial clock output
External data bus width change input
Processor mode change input
Mobile phone mute input
Not used
Reset input
Clock output
GND
Clock input
p
Power supply
pp y input
p
NMI input
p
RDS : Clock input
p
RDS : PLL lock detect input
p
Not used
IPBUS : Input
p 2
Audio selector control output 1
Audio selector control output 2
PEE sound output
Not used
P-BUS : Reset output
P-BUS : Reception
p
enable input/output
p
p
P-BUS : Service request
q
input
p
IPBUS : Input
p
IPBUS : Output
p
GRILLE : Data output
p
GRILLE : Data input
p
Not used
BT driver : CTS input
BT driver : Data output
BT driver : Data input
Not used
BT driver : RTS output
Output for clock adjustment
GRILLE : Chip enable output
Detach sense input
p
Illumination output
p inside flap
p
Illumination output
Eject
j
key
y input
p
Not used
RDS : 57kHz pulse count input
RDS : Lock signal input
RDS : Data input
BT driver : RF test output
BT driver : Power supply ON/OFF output
BT driver : Reset output
External memory : Chip select output
External memory : Write protect output
RGB DAC IC : Clock input
p
RGB DAC IC : Strobe output
p
RGB DAC IC : Data output
p
Not used
CSENS output
TUNER : PLL communication
F
76
DEH-P55BT/XN/EW5
1
2
3
4
5
Pin No.
58
59
60
61
62
63,64
65,66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81-83
84
85
86
87,88
89
90
91
92,93
94
95
96
97
98
99
100
6
Pin Name
TUNPDO
TUNPCK
VCC
NC
VSS
NC
ROT1,0
DALMON
NC
tunpce@
TUNPCE1
ROMCS
asens
bsens
ROMCK
ROMDATA
VST
VDT
VCK
IPPW
ASENBO
NC
BTMUTE
MUTE
TESTIN
NC
KEYAD
NC
CSENS
NC
AVSS
SL
VREF
AVCC
MEMDI
MEMDO
MEMCK
I/O
O
O
I
O
O
O
O
I
I
O
I/O
O
O
O
O
O
O
O
I
I
I
I
I
O
O
7
8
TUNER : Data output(PLL)
TUNER : Clock output(PLL)
Power supply input
Not used
GND
Not used
Rotary encoder pulse input
For consumption current reduction output
Not used
TUNER : Chip enable output(EEPROM)
TUNER : Chip enable output(PLL)
ROM correction : Chip select output
ACC sense input
Back up sense input
ROM correction : Clock output
ROM correction : Data input/output
EVOL : Strobe output
EVOL : Data output
EVOL : Clock output
IPBUS : Driver power supply control output
IPBUS : Slave ACC sense output
Not used
Mute output for Bluetooth sound codec
MUTE output
Test program input
Not used
Key data input
Not used
Flap opening-and-closing sense input
Not used
AD translation power supply input terminal
TUNER : Signal level input
AD translation reference voltage
AD translation power supply input terminal
External memory : Data input
External memory : Data output
External memory : Clock output
A
B
C
D
26
50
* PEG238A
25
51
E
75
100
76
1
F
DEH-P55BT/XN/EW5
5
6
7
8
77
1
2
3
4
*AK2301A
A
-Pin Layout
24 23 22 21 20 19 18 17 16 15 14 13
B
1
2
3
4
5
6
7
8
9 10 11 12
C
-Block Diagram
GST
VFTN
VFTP
+
A/D
AAF
AMPT
D
PCM I/F
VR
VFR
GSR
SMF
AMPR
D/A
CODEC Core
+
Internal
Main Clock
TAGND
E
VREF
DX
DR
FS
BCLK
PLL
PLLC
MUTEN
RSTN
BGREF
VDD
AMP1
VSS
AMP2
+
AMP1O
TEST1
TEST2
TEST3
+
AMP1I
AMP2O
AMP2I
F
78
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
- Pin Functions(PD6538A)
Pin No.
1-39
40-43
44-46
47
48
49
50
51,52
53
54
55
56
57
58,59
60-63
64-69
70-100
Pin Name
SEG38-0
COM3-0
V1-3
VCC
POUT1
TXD
RXD
MOD0,1
RESET
X0
X1
VSS
REM
ROUT2,3
KDT4-1
KST6-1
SEG69-39
I/O
O
O
O
O
I
I
I
I
O
O
LCD segment output
LCD common output
Power supply terminal
Power supply
Bluetooth indicator control output
Key data output
Display data input
Connect to GND
Reset input
Crystal oscillator connection pin
Crystal oscillator connection pin
GND
Remote control reception input
Not used
Key data input
Key strobe output
LCD segment output
A
B
* PD6538A
16
1
64
17
C
32
33
VDD
6
5
AO4
4
RESET
AO5
D/A
7
D
3
AO3
2
AO2
E
DEH-P55BT/XN/EW5
5
6
7
8
F
VSS
1
Buffer
Operational
Amplifier
10bit
D/A Converter
10bit Latch
CH2
10bit Latch
CH1
10bit
D/A Converter
14
GND
3
L
D/A
4
L
5
D/A
L
L
Address
decoder
14bit Shift Register
12
13
11
DI
AO1
CLK
6
9
10
D/A
AO6
LD
VCC
48
BU2507FV
8
49
79
1
2
3
4
- Pin Functions (PE5505A)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35,36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
A
B
C
D
E
Pin Name
AVREF
AVSS
testin
CLAMP
EVDD
FMODE
FLRQ
IC/FLMD0
VDD
REGC
VSS
X1
X2
reset
XT1
XT2
PULLDOWN
ejsw
xint
NC
brst
BSI
BSO
bsck
FTxD
FRxD
BRXEN
bsrq
dspok
DSCSNS
8EJ(S905)
12EJ(S904)
EVSS
EVDD
SRAMLEVEL0,1
EMPH
emph
CDMUTE
LOEJ
CLCONT
HOME
adena
LRCKOK
SRAMLEVEL2
CD3VON(MCKRQ)
CONT
xrst
VDCONT
xsi
xso
xck
xwait
XASTB
AD0
INT
I/O
Format
I
I
I
I
I
C
I
I
I
O
I/O
O
I
I/O
I/O
C
/C
C
/C
/C
I
I
I
C
C
C
O
O
C
O
I
O
O
O
O
O
O
O
I
O
O
I
O
O
C
C
C
C
C
C
C
C
C
C
C
C
A power supply / Positive power supply(5V)
A power supply GND
Chip check test program starting input
Not used
E power supply / Positive power supply
For flash rewriting / L : flash rewriting mode
For flash rewriting / Reset voltage control
IC : VSS direct connection/FLMOD0 : Pull-down
Positive power supply(5V)
Connected to the capacity stabilizing output of the regulator
GND
Oscillator connection for mainclock
Oscillator connection for mainclock
System reset input
Connected to the oscillator for subclock(connected to VSS via the resistor)
Connected to the oscillator for subclock(Open)
Connected to EVDD or EVSS via the resistor
Not used
CD LSI interruption signal input
Not used
Bus reset input
Bus serial data input
Bus serial data output
Bus serial clock input/output
For flash rewriting(transmitted signal)
For flash rewriting(received signal)
Bus RX enable input/output
Bus serial clock input/output
Not used
Disc state sense input
input of detection of 8 cm disc ejection
input of detection of 12 cm disc ejection
E power supply GND
E power supply / Positive power supply
SRAM level meter output
Emphasis information output
Not used
Not used
Not used
Driver input switching output
Home SW sense input
A/D reference voltage supply control output
(DOUT mute output)
SRAM level meter output
CD + 3.3 V power supply control output(Digital output : MCKRQ)
Servo driver power supply control output
CD LSI reset control output
VD power supply control output
CD LSI serial data input
CD LSI serial data output
CD LSI serial clock output
CD LSI wait control signal input
CD LSI address strobe output
Address/data Bus 0
Not used
F
80
DEH-P55BT/XN/EW5
1
2
3
4
5
Pin No.
57
58
59
60,61
62
63
64-68
69
70
71-75
76
77-90
91-93
94
95
96,97
98
99
100
6
Pin Name
ROMDATA
ROMCK
ROMCS
NC
CLKOUT
LOCK
NC
BVSS
BVDD
NC
FLMD1
NC
A/D
csens
TYPE_A/D
NC
TEMP
VDSENS
DSCSNS
I/O
I/O
O
O
7
Format
C
I
I/O
/C
I
E2PROM data input/output
E2PROM clock output
E2PROM chip selection output
Not used
Not used
Spindle lock input
Not used
B power supply GND
B power supply / Positive power supply
Not used
Address/Data Bus 5
Not used
Not used
Not used
Not used
Not used
Not used
VD power supply short sense input
Not used
Format
C
76
100
* PE5505A
1
8
A
B
meaning
C MOS
75
C
25
50
26
51
D
NJM2886DL3-33
Thermal
Protection
-+
Bandgap
Reference
E
1
2
3
4
5
CONTROL
VIN
GND
VO
NC
F
DEH-P55BT/XN/EW5
5
6
7
8
81
1
2
3
4
- Pin Functions (UPD63763CGJ)
Pin No.
1
2
3
4-8
9-16
17
18
19
20
21
22
23,24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39-41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
A
B
C
D
E
Pin Name
D.VDD
D1.GND
reset
AB12-8
AD7-0
cs
ASTB
read
write
wait
INTQ
IFMODE0,1
D1.VDD
DA.VDD
ROUT
DA.GND
REGC
DA.GND
LOUT
DA.VDD
X.VDD
XTAL
xtal
X.GND
VDDREG15
PWMSW0
TEST3-1
PWMSW1
TESTEN
D1.GND
DIN
DOUT
SCKIN
SCKO
LRCKIN
LRCK
xtalen
D1.VDD
RFCK/HOLD
WFCK/MIRR
PLCK/RFOK
LOCK/RFOK
C1D1/C8M/(RA13)
C1D2/C16M/(RA12)
C2D1/RMUTE
C2D2/LMUTE
C2D3/SHOCK
D1.GND
C33M
(rcs)
RA11
(CKE)
ras
cas)(LDQM)
cas!(UDQM)
Power supply for digital circuits
Ground for 1.6 V digital circuits
Input of reset
Address bus 12-8 from the microcomputer
Address/data bus 7-0 to the microcomputer
Chip selection
Address strobe
Control signals(read)
Control signals(write)
Control signals(wait)
Interruption signals to the external microcomputer
Switching the microcomputer I/F 0, 1
Power supply for 1.6 V digital circuits
Power supply for DAC
Output of audio for the right channel
Ground for DAC
Connected to the capacitor for band gap
Ground for DAC
Output of audio for the left channel
Power supply for DAC
Power supply for the crystal oscillator
Connected to the crystal oscillator(16.9344 MHz)
Connected to the crystal oscillator(16.9344 MHz)
Ground for the crystal oscillator
Control of 1.6 V regulator
Setup 0 for PWM output(SD, MD)
Connected to Ground
Setup 1 for PWM output(FD, TD)
Connected to Ground
Input of audio data
Output of audio data
Clock input for audio data
Clock output for audio data
Input of LRCK for audio data
Output LRCK for audio data
Permission to oscillate 16.9344 MHz
Power supply for 1.6 V digital circuits
Output of RFCK/HOLD signal
Output of WFCK/MIRR signal
Output of PLCK/Output of RFOK
Output of LRCK/Output of RFOK
Information on error correction/C8M : 8 MHz
Information on error correction/C16M : 16 MHz
Information on error correction/Mute for Rch
Information on error correction/Mute for Lch
Information on error correction/Detection of vibration
Output of 33.8688 MHz(CLK for SDRAM)
DRAM cs
Output of DRAM address 11
Output of DRAM CKE
Output of DRAM ras
Output of DRAM lower cas(LDQM)
Output of DRAM upper cas(UDQM)
I/O
I
I
I/O
I
I
I
I
O
O
I
O
O
I
O
I
I
I
I
I
O
I
O
I
O
I
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
F
82
DEH-P55BT/XN/EW5
1
2
3
4
5
Pin No.
70
71
72
73-88
89-99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120,121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
6
Pin Name
we
oe(cas)
s
s)
D.GND
RDB0-15
RA0-10
D.VDD
FD+
FDTD+
TDSD+
SDMD+
MDREFOUTSV
AD.VDD
EFM
ASY
ATEST
RFI
AD.GND
AGCO
C3T
AGCI
RFO
EQ2,1
RF2RFA.GND
A
C
B
D
F
E
VREFIN
A.VDD
REFOUT
REFC
FEFEO
ADIN
TETEO
TE2
TEC
LD
PD
D.GND
I/O
O
O
I/O
O
O
O
O
O
O
O
O
O
O
O
I
O
I
O
O
I
O
I
I
I
I
I
I
I
I
I
I
O
I
I
O
I
I
O
O
I
O
I
7
8
Output of DRAM we
Output of DRAM oe(cas)
s
s)
Ground for digital circuits
Input/output of DRAM data0-15
Output of DRAM address0-10
Power supply for digital circuits
Output of focus drive PWM +
Output of focus drive PWM Output of tracking drive PWM +
Output of tracking drive PWM Output of thread drive PWM +
Output of thread drive PWM Output of spindle drive PWM +
Output of spindle drive PWM REFOUT for servo
Power supply for ADC
Output of EFM signals
Input of asymmetry
Analog tests
Input of RF
Ground for the analog system
Output of RF
Connection to the capacitor for detecting 3T
Input of AGC
Output of RF(AGC)
Equalizer 2, 1
Reversal input of RF2
Reversal input of RF
Ground for the analog system
Input of A
Input of C
Input of B
Input of D
Input of F
Input of E
Input of reference voltage
Power supply for the analog system
Output of reference voltage
Connected to the capacitor for output of REFOUT
Reversal input of FE
Output of FE
Input of FE, TE A/D converter
Reversal input of TE
Output of TE
TE2
TEC
Output of LD
Input of PD
Ground for digital circuits
A
B
C
D
E
144
109
* UPD63763CGJ
1
108
36
73
72
37
F
DEH-P55BT/XN/EW5
5
6
7
8
83
1
2
3
4
- FM/AM Tuner Unit
IC 3 EEPROM
5.0V
AM ANT
RDS_HSLK
RDS_LOCK
RDS_CK
18 19 20 21
RDS_DATA
14
DO
11
CE1
CK
DI
5V
OSC
1
10 9 8
LDET
A
SL
CE2
NC
5
ROM_VDD
13
IC 5
3.3V
←
7 6
LPF
FMRF
ATT
Rch
IC 1
3.3V
FM ANT
ATT
FMRF
ANT adj
Lch
MIXER, IF AMP
RF adj
No. Symbol
1 AMANT
C
2 RFGND
3 FMANT
4 VCC
L
6
8 CE1
9 CK
10
D
DO
DGND
NC
VDD_3.3
I
O
I
I
I
I
O
O
O
E
NC
15
22
16
20
O
21 RDS_HSLK
O
22 AUDIOGND
23 L ch
O
24 R ch
O
RF ground
g
FM antenna input
power supply
signal
g
level
chip enable-2
non connection
chip enable-1
clock
data in
lock detector
osc ground
g
power supply
data out
digital
g
g
ground
non connection
power supply
RDS clock
DS data
RDS lock
CF52
VCC
AUDIOGND
12
I/O Explain
I AM antenna input
12 OSCGND
13 ROM_VDD
14
15
16
17
DGND
2
OSCGND
RFGND
T51
4
3.3V
IC 4
3.3V 2.5V 2.5V
17
AM antenna input high impedance AMANT pin is connected with
an all antenna by way of 4.7µH. (LAU type inductor) A series circuit
including an inductor and a resistor is connected with RF ground for
the countermeasure against
g
the hum of power transmission line.
Ground of antenna block
Input of FM antenna 75Ω Surge
g absorber(DSP-201M-S00B) is necessary.
The power supply for analog
g block. D.C 8.4V ± 0.3V
Chip enable for EEPROM ”Low” active
Not used
Chip enable for AF•RF ”High
g ” active
Clock
Data input
“Low” active
Ground of oscillator block
Power supply for EEPROM pin 13 is connected with a power supply of
micro computer.
Data output
Ground of digital
g
block
Not used
The power supply for digital
g
block. 3.3V ± 0.2V
Output of RDS clock(2.5V)
Output unit “High” active(2.5V) (RDS_LOCK turns over by the
external transistor “Low” active)
Output unit “High
. “
” active)
Ground of audio block
FM stereo “L-ch” signal output or AM audio output
FM stereo “R-ch” signal output or AM audio output
RDS high speed
lock
audio ground
g
L channel output
R channel output
F
84
DEH-P55BT/XN/EW5
1
2
23
DET, FM MPX,
RDS DECODER
VDD_3.3
B
←
3
24
IC 2
2.5V
3
4
5
6
7
8
DEH-P55BT/XN/EW5
85
COMMON
SEG63
SEG62
SEG61
SEG60
SEG59
SEG58
SEG57
SEG56
SEG55
SEG54
SEG53
SEG52
SEG51
SEG50
SEG49
SEG48
SEG47
SEG46
SEG45
SEG44
SEG43
SEG42
SEG41
SEG40
SEG39
SEG38
SEG37
SEG36
SEG35
SEG34
SEG33
SEG32
SEG31
SEG30
SEG29
SEG28
SEG27
SEG26
SEG25
SEG24
SEG23
SEG22
SEG21
SEG20
SEG19
SEG18
SEG17
SEG16
SEG15
SEG14
SEG13
SEG12
SEG11
SEG10
SEG 9
SEG 8
SEG 7
SEG 6
SEG 5
SEG 4
SEG 3
SEG 2
SEG 1
SEG 0
COM 3
COM 2
COM 1
COM 0
COM 3
COM 2
COM 1
COM 0
SEGMENT
F
E
D
C
B
A
- LCD (CAW1926)
7.2.2 DISPLAY
5
6
7
8
1
2
3
4
7.3 OPERATIONAL FLOW CHART
A
Power ON
VDD, VCC=5V
Pin 14, 60
bsens
Pin 73
B
bsens=L
asens
Pin 72
asens=L
DSENS
Pin 39
C
DSENS=L
ASENBO←H
Pin 80
Starts
communication
with Grille
microcomputer.
300ms
SWVDD←H
Pin 38
D
300ms
In case of the above signal, the communication
with Grille microcomputer may fail.
If the time interval is not 300msec, the oscillator
may be defective.
Source keys
operative
Source ON
E
SYSPW←H
Pin 1
Completes power-on operation.
(After that, proceed to each source operation)
F
86
DEH-P55BT/XN/EW5
1
2
3
4
5
6
7
8
8. OPERATIONS
A
B
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
87
1
2
1
2
3
4
3
4
A
B
C
D
E
F
88
DEH-P55BT/XN/EW5
5
6
7
8
A
B
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
89
1
2
1
2
3
4
3
4
A
B
C
D
E
F
90
DEH-P55BT/XN/EW5
5
6
7
8
Fixing the front panel
A
If you do not operate the removing and attaching the front panel function, use the supplied
fixing screws and holders to fix the front panel to this unit.
1. Attach the holders to both sides of the front panel.
Holder
CND2699
Holder
CND1250
B
2. Replace the front panel to the unit.
C
3. Flip the holders into upright positions.
D
4. Fix the front panel to the unit using fixing screws.
Fixing Screw
BPZ20P060FTB
E
F
DEH-P55BT/XN/EW5
5
6
7
8
91
1
2
3
4
3
4
- CONNECTION DIAGRAM
A
B
C
D
E
F
92
DEH-P55BT/XN/EW5
1
2
5
6
7
8
A
B
C
D
E
F
DEH-P55BT/XN/EW5
5
6
7
8
93
1
2
3
4
- Jigs List
Name
Test Disc
L.P.F.
A
Jig No.
TCD-782
GGF1539
Remarks
Checking
g the g
grating
g
Checking
g the g
grating
g ((Two pieces))
Removing the cord assy (BT antenna cable)
Grease No.
GEM1024
GEM1045
Remarks
CD Mechanism Module
CD Mechanism Module
- Grease List
Name
Grease
Grease
B
Before shipping out the product, be sure to clean the
following portions by using the prescribed cleaning
tools:
C
Portions to be cleaned
CD pickup lenses
Cleaning
g tools
Cleaning liquid : GEM1004
Cleaning
g paper
p p : GED-008
D
E
F
94
DEH-P55BT/XN/EW5
1
2
3
4

D - Kazus.ru

Transcription

Similar documents

B - Schematheek

Bike GPS mobile: Frequently Asked Questions 1. Unterstützt mein

DEH-P680MP/XN/UC

KD-LHX551, KD-LHX552 KD

DEH-P6700MP/XM/EW

DEH-P880PRS/XN/UC

DEH-2800MP/XN/UC

DEH-80PRS/XNEW5 DEH

DEH-2310UB/XNEW5 DEH-2300UBB/XNEW5 DEH

DEH-P8400MP XN/EW - Recambios, accesorios y repuestos