TC40 Industrial Thermocouple Sensor

Comments

Transcription

TC40 Industrial Thermocouple Sensor
Thermocouples
WIKA worldwide
TC40 - Industrial Thermocouple Sensor
„„ Type K (NiCr-Ni),
„„ Type J (Fe-CuNi),
Sensor Element:
„„ Type E (NiCr-CuNi),
„„ Type N (NiCrSi-NiSi),
„„ Type T (Cu-CuNi)
Temperature range:
Number of sensors:
Classification
tolerance:
Measuring point:
Electrical approvals:
-200 °C to +1260 °C
(depending upon element)
„„ 2-wire single circuit
„„ 4-wire dual circuit
„„ Class 2 and class 1
per DIN EN 60584
„„ ISA standard and special
to ANSI MC96.1-1982
Ungrounded, grounded, or
exposed
ATEX/IEC, NAMUR
„„ Lengths and
diameters standard or
customer specific
„„ Calibration - single point
and multiple points
„„ Material traceability
of the thermocouple
alloys, metal sheath
and mineral insulation
Options:
Electrical
Temperature
Measurement
„„ Selectable accuracy
tolerance
„„ Special designs
and materials
„„ Intrinsically safe version:
ATEX, NAMUR (EEx-i)
Features:
„„ The sensor can be mounted into a process with
the use of a fixed fitting, compression fitting,
union nut, swivel nut or a spring-loaded bushing.
„„ The sensor has electrical approvals
for intrinsic safety, ingress protection
and general purpose areas.
„„ Electrical authorities that have registered these
approvals include ATEX/IEC and NAMUR.
„„ The thermocouple sensors are available
with a variety of sheath materials including
austenitic 300 series and ferritic 400 series
stainless steels, corrosion resistant and high
temperature oxidation resistant alloys.
„„ Sensor diameters range from 0.020 inch
to 0.375 inch and 0.5 mm to 8 mm.
„„ Thermocouple temperature ranges are
dependent on the sheath & conductor diameter,
element calibration, and sheath material.
„„ Terminations include stripped leads, standard or
mini plugs & jacks, spade lugs, or Lemosa plugs.
„„ Termination accessories include cord grip,
braze adapter, cable or wire clamps, hex
crimp adapters, or compression adapters.
„„ If required the metal sheath can be formed
during manufacture or by the installer.
„„ Extension cable is available in a variety of
insulation and jacket materials. These include
interlocking flexible armour, braided stainless
steel, fibreglass, PTFE (Teflon®), PVC and Silicon.
North America
Africa/Middle East
Canada
WIKA Instruments Canada Ltd.
Edmonton, Alberta
Tel.: (+1) 780 463 7035
Fax: (+1) 780 462 0017
E-mail: [email protected]
www.wika.ca
Benelux
WIKA Benelux
Echt
Tel.: (+31) 475 53 55 00
Fax: (+31) 475 53 54 46
E-mail: [email protected]
www.wika.nl
Romania
WIKA Instruments Romania S.R.L.
Bucuresti
Tel.: (+40) 21-456 31 38
Fax: (+40) 21-456 31 37
E-mail: [email protected]
www.wika.ro
Egypt
WIKA Alexander Wiegand
GmbH & Co. KG
Nasr City, Cairo
Tel.: (+20) 2-227 33 140
Fax: (+20) 2-227 33 140
E-mail: [email protected]
Kazakhstan
TOO WIKA Kasachstan
Almaty
Tel.: (+7) 3272 33 08 48
Fax: (+7) 3272 78 99 05
E-mail: [email protected]
www.wika.kz
Mexico
Instrumentos WIKA México,
S.A. de C.V.
Álvaro Obregón
Tel.: (+52) 55 5020 5300
Fax: (+52) 55 5020 5301
E-mail: [email protected]
www.wika.com.mx
Bulgaria
WIKA Bulgaria EOOD
Sofia
Tel.: (+359) 2 82138-10
Fax: (+359) 2 82138-13
E-mail: [email protected]
www.wika.bg
Russia
ZAO “WIKA MERA”
Moskau
Tel.: (+7) 495-648 01 80
Fax: (+7) 495-648 01 81
E-mail: [email protected]
www.wika.ru
Korea
WIKA Korea Ltd.
Seoul
Tel.: (+82) 2-869 05 05
Fax: (+82) 2-869 05 25
E-mail: [email protected]
www.wika.co.kr
Finland
WIKA Finland Oy
Helsinki
Tel.: (+358) 9-682 49 20
Fax: (+358) 9-682 49 270
E-mail: [email protected]
www.wika.fi
Serbia
WIKA Merna Tehnika d.o.o.
Beograd
Tel.: (+381) 11 2763 722
Fax: (+381) 11-753 674
E-mail: [email protected]
www.wika.co.yu
Iran
WIKA Instrumentation Pars
Kish Ltd.
Tehran
Tel.: (+98) 21- 8852 6730 3
Fax: (+98) 21- 8875 7413
E-mail: [email protected]
www.wika.ir
France
WIKA Instruments s.a.r.l.
Eragny-sur-Oise
Tel.: (+33) 1/34 30 84 84
Fax: (+33) 1/34 30 84 94
E-mail: [email protected]
www.wika.fr
Spain
Instrumentos WIKA, S.A.
Sabadell (Barcelona)
Tel.: (+34) 902 902 577
Fax: (+34) 933 938 666
E-mail: [email protected]
www.wika.es
Germany - Head Office
WIKA Alexander Wiegand
GmbH & Co. KG
Klingenberg
Tel.: (+49) 9372 132-0
Fax: (+49) 9372 132-406
E-mail: [email protected]
www.wika.de
Switzerland
MANOMETER AG
Hitzkirch
Tel.: (+41) 41 919 72 72
Fax: (+41) 41 919 72 73
E-mail: [email protected]
www.manometer.ch
USA
WIKA Instrument Corporation
Lawrenceville, Georgia
Tel.: (+1) 770-513 8200
Fax: (+1) 770-338 5118
E-mail: [email protected]
www.wika.com
South America
Argentina
WIKA Argentina S.A.
Buenos Aires
Tel.: (+54) 11 4730-1800
Fax: (+54) 11 4761-0050
E-mail: [email protected]
www.wika.com.ar
Brazil
WIKA DO BRASIL
Iperó - SP
Tel.: (+55) 15 3459 9700
Fax: (+55) 15 3266 1650
E-mail: [email protected]
www.wika.com.br
Europe
Austria
WIKA Meßgerätevertrieb
Ursula Wiegand GmbH & Co. KG
Wien
Tel.: (+43) 1-8 69 16 31
Fax: (+43) 1-8 69 16 34
E-mail: [email protected]
www.wika.at
„„ Non-sparking version:
ATEX (EEx-n)
„„ Inline transition
„„ Retractable cord
„„ Strain relief spring
103-02028 11/2007 CA
Italy
WIKA Italiana SRL
Arese (Milano)
Tel.: (+39) 02-93 86 11
Fax: (+39) 02-93 86 174
E-mail: [email protected]
www.wika.it
Poland
Kujawska Fabryka Manometrow
Wloclawek
Tel.: (+48) 54230 11 00
Fax: (+48) 54230 11 01
E-mail: [email protected]
www.manometry.com.pl
Ukraine
WIKA Pribor GmbH
Donetsk
Tel.: (+38) 062 345-34-16
Fax: (+38) 062 345-34-17
E-mail: [email protected]
www.wika.donetsk.ua
United Kingdom
WIKA Instruments Limited
Merstham, Redhill
Tel.: (+44) (0) 1737 644 008
Fax: (+44) (0) 1737 644 403
E-mail: [email protected]
www.wika.co.uk
South Africa
WIKA Instruments (Pty.) Ltd.
Gardenview, Johannesburg
Tel.: (+27) 11-621 00 00
Fax: (+27) 11-621 00 59
E-mail: [email protected]
www.wika.co.za
United Arab Emirates
WIKA Middle East FZE
Jebel Ali, Dubai
Tel.: (+971) 4-883 90 90
Fax: (+971) 4-883 91 98
E-mail: [email protected]
Asia
China
WIKA International Trading
(Shanghai) Co., Ltd.
Shanghai
Tel.: (+86) 21 53 85 25 72
Fax: (+86) 21 53 85 25 75
E-mail: [email protected]
India
WIKA Instruments India Pvt. Ltd.
Wagholi, Pune
Tel.: (+91) 20-66293200
Fax: (+91) 20-66293325
E-mail: [email protected]
www.wika.co.in
Japan
WIKA Japan K.K.
Minato-ku, Tokyo
Tel.: (+81) 3-5439-6673
Fax: (+81) 3-5439-6674
E-mail: [email protected]
Malaysia
WIKA Instrumentation (M) Sdn Bhd
Puchong, Selangor
Tel.: (+03) 80631080
Fax: (+03) 80631070
E-mail: [email protected]
www.wika.com.my
Singapore
WIKA Instrumentation PTE. LTD.
Singapore
Tel.: (+65) 6844 55 06
Fax: (+65) 6844 55 07
E-mail: [email protected]
www.wika.com.sg
Taiwan
WIKA Instrumentation Taiwan Ltd.
Pinjen, Taoyuan
Tel.: (+886) 3 420 6052
Fax: (+886) 3 490 0080
E-mail: [email protected]
www.wika.com.tw
Australia
Australia
WIKA Australia Pty. Ltd.
Rydalmere NSW
Tel.: (+61) 2 8845 5222
Fax: (+61) 2 9684 4767
E-mail: [email protected]
www.wika.com.au
TC40
Industrial Thermocouple Sensor
Part of Your Business
TC40
Part
Number
TC40 Industrial Thermocouple Sensor
1
M
extensive range of elements, terminations, and process connections can
2
be individually selected for the appropriate application. With their flexibility
Electrical approval
and the small diameters in which they are available, TC40 thermocouples
can be used in locations that are not easily accessible.
B
EEx-i (ATEX) gas/dust, acc. to
directive 94/9/EC
H
EEx-n (ATEX) acc. to directive
94/9/EC
D
EEx-i, confirmation NAMUR NE24
Z
Without
3
3
4
5
Fitting style
6
7
8
9
10
12
Straight
„„ Automotive industries
4
45 degree bend
„„ Chemical and petrochemical industries
9
90 degree bend
Fitting material
9
Element
17
18
19
20
21
14
Termination
16
22
Miscellaneous options
Stainless steel 316 (1.4401)
1
Type K (NiCr-Ni) / 0...+1260 °C
1
Stripped leads
S
Strain relief spring
B
Stainless steel 316 Ti (1.4571)
2
Type K (NiCr-Ni) / 0...+600 °C
2
Spade lugs
R
Retractable cord
Z
Without
3
Type J (Fe-CuNi) / 0...+760 °C
3
Standard plug 2-pin (male)
I
Inline transition
4
Type J (Fe-CuNi) / 0...+300 °C
4
Mini plug 2-pin (male)
Z
Without
A
High temperature standard plug
2-pin (male)
C
Compression fitting with Teflon®
ferrule
D
Compression fitting, spring loaded,
with stainless steel ferrule
L
7
Compression fitting, spring loaded,
with Teflon® ferrule
Fixed fitting, double threaded hex
bushing
Spring loaded bushing without oil
seal
K
Spring loaded bushing with oil seal
G
Union nut
H
Swivel nut
Z
Without
Thread size
K
1/2 NPT
Sensor diameter
5
Type N (NiCrSi-NiSi) / 0...+1260 °C
1
1/4 inch / 0.250 inch (6.35 mm)
6
Type N (NiCrSi-NiSi) / 0...+600 °C
4
3/16 inch / 0.188 inch (4.75 mm)
7
Type E (NiCr-CuNi) / 0...+870 °C
B
High temperature mini plug 2-pin
(male)
2
1/8 inch / 0.125 inch (3.17 mm)
8
Type E (NiCr-CuNi) / 0...+400 °C
5
Standard jack 2-pin (female)
5
1/16 inch / 0.063 inch (1.59 mm)
9
Type T (Cu-CuNi) / -200...+370 °C
6
Mini jack 2-pin (female)
8
3/8 inch / 0.375 inch (9.53 mm)
7
Standard solid pin plug 2-pin (male)
7
1/25 inch / 0.040 inch (1.02 mm)
F
Lemosa plug size 1 S (male)
6
1/50 inch / 0.020 inch (0.51 mm)
1
Single
G
Lemosa plug size 2 S (male)
D
6.0 mm
2
Dual
I
Lemosa plug size 1 S (female)
J
Lemosa plug size 2 S (female)
10
Number of sensors
W-Dimension (W)
*****
ZZZZZ
18
Please specify (e.g. 84 mm = 00084)
(e.g. 9.5 inch = 00095)
Without
X-Dimension (X)
****
ZZZZ
Please specify (e.g. 84 mm = 0084)
(e.g. 9.5 inch = 0950)
Without
B
3.0 mm
4.5 mm
Q
1.6 mm
8
ISA standard to ANSI MC96.1-1982
N
1.5 mm
9
ISA special to ANSI MC96.1-1982
F
Cord grip
Class 2 per DIN EN 60584
A
Braze adapter
Class 1 per DIN EN 60584
C
Cable clamp
D
Cable clamp and weatherproof boot
E
Dual compression adapter
G
Hex crimp adapter
H
Hex crimp adapter and
weatherproof boot
1
Quality certificates
I
Compression adapter
Z
Without
J
Compression adapter and
weatherproof boot
K
Wire clamp
T
Additional text
L
Wire clamp and weatherproof boot
Z
Without
M
Mini wire clamp
Z
Without
11
Classification tolerance
1.0 mm
„„ Energy and power plant technology
N
1/4 NPT
O
0.5 mm
1
„„ Furnaces, kilns, ovens and boilers
X
3/8 NPT
A
2.0 mm
„„ Heat treating
W
1/8 NPT
E
8.0 mm
F
G 1/2 B
8
17
C
P
12
Sheath material
Measuring point
1
Ungrounded
2
Grounded
3
Exposed
C
G 3/4 B
R
G 1/4 B
P
Stainless steel 316 / 316 L (1.4401
/ 1.4435)
„„ Plastics and rubber industries
D
G 1/8 B
O
Stainless steel 310 (1.4841)
„„ Power and utilities
P
M14 x 1.5
J
Inconel® 600 (2.4816)
N
PVC jacket
„„ Pulp and paper
O
M18 x 1.5
T
Stainless steel 446 (1.4762)
O
PVC jacket, shielded
Z
Without
„„ Water and wastewater treatment
16
A
3/4 NPT
„„ Turbines
15
B
J
„„ Smelting
14
Compression fitting with stainless
steel ferrule
I
5
6
2
„„ Machinery, plant and tank measurement
13
Fixed fitting, threaded hex bushing
E
Sensor design
0
„„ Incinerators
11
A
Metric
EEx-i (ATEX) gas, acc. to directive
94/9/EC
„„ Engine cylinder heads and oil sumps
4
Imperial
A
(~25 mm)
2
Note: Some configurations are unavailable. Your WIKA sales person will notify you if you have made an incorrect selection
TC40-XXXXXXXX-XXXX-XXXXXXXXXXXXXXXXXXXXXX-XX
Unit of measure
I
all applications where metal sheathed thermocouples are required. An
TC40 series sensors are suitable for all industrial and
commercial applications including:
1
Code
TC40 series thermocouples are custom industrial sensors designed to suit
Applications:
Create your product part number by selecting the appropriate assembly items from each of the
categories below. Enter the item code into the applicable box to generate the part number.
13
Lead wire insulation
I
Hastelloy® X (2.4665)
D
PVC armour over Teflon®
H
Hastelloy® C276 (2.4819)
J
Silicon jacket
M
Silicon jacket, shielded
T
Teflon® jacket
L
Teflon® jacket, shielded
S
Stainless steel braid over Teflon®
G
Teflon® armour over Teflon®
F
Individual Teflon® leads
B
Armoured Teflon®
H
Fibreglass jacket
E
Teflon® armour over fibreglass
K
Stainless steel braid over fibreglass
C
Individual fibreglass leads
A
Armoured fibreglass
P
MI-cable conductor wire
15
19
Termination accessories
Y-Dimension (Y)
****
ZZZZ
20
22
Without
A-Dimension (A)
*****
21
Please specify (e.g. 84 mm = 0084)
(e.g. 9.5 inch = 0095)
Please specify (e.g. 84 mm = 00084)
(e.g. 9.5 inch = 00950)
Certificates
Additional order details
Thermocouples
WIKA worldwide
TC40 - Industrial Thermocouple Sensor
„„ Type K (NiCr-Ni),
„„ Type J (Fe-CuNi),
Sensor Element:
„„ Type E (NiCr-CuNi),
„„ Type N (NiCrSi-NiSi),
„„ Type T (Cu-CuNi)
Temperature range:
Number of sensors:
Classification
tolerance:
Measuring point:
Electrical approvals:
-200 °C to +1260 °C
(depending upon element)
„„ 2-wire single circuit
„„ 4-wire dual circuit
„„ Class 2 and class 1
per DIN EN 60584
„„ ISA standard and special
to ANSI MC96.1-1982
Ungrounded, grounded, or
exposed
ATEX/IEC, NAMUR
„„ Lengths and
diameters standard or
customer specific
„„ Calibration - single point
and multiple points
„„ Material traceability
of the thermocouple
alloys, metal sheath
and mineral insulation
Options:
Electrical
Temperature
Measurement
„„ Selectable accuracy
tolerance
„„ Special designs
and materials
„„ Intrinsically safe version:
ATEX, NAMUR (EEx-i)
Features:
„„ The sensor can be mounted into a process with
the use of a fixed fitting, compression fitting,
union nut, swivel nut or a spring-loaded bushing.
„„ The sensor has electrical approvals
for intrinsic safety, ingress protection
and general purpose areas.
„„ Electrical authorities that have registered these
approvals include ATEX/IEC and NAMUR.
„„ The thermocouple sensors are available
with a variety of sheath materials including
austenitic 300 series and ferritic 400 series
stainless steels, corrosion resistant and high
temperature oxidation resistant alloys.
„„ Sensor diameters range from 0.020 inch
to 0.375 inch and 0.5 mm to 8 mm.
„„ Thermocouple temperature ranges are
dependent on the sheath & conductor diameter,
element calibration, and sheath material.
„„ Terminations include stripped leads, standard or
mini plugs & jacks, spade lugs, or Lemosa plugs.
„„ Termination accessories include cord grip,
braze adapter, cable or wire clamps, hex
crimp adapters, or compression adapters.
„„ If required the metal sheath can be formed
during manufacture or by the installer.
„„ Extension cable is available in a variety of
insulation and jacket materials. These include
interlocking flexible armour, braided stainless
steel, fibreglass, PTFE (Teflon®), PVC and Silicon.
North America
Africa/Middle East
Canada
WIKA Instruments Canada Ltd.
Edmonton, Alberta
Tel.: (+1) 780 463 7035
Fax: (+1) 780 462 0017
E-mail: [email protected]
www.wika.ca
Benelux
WIKA Benelux
Echt
Tel.: (+31) 475 53 55 00
Fax: (+31) 475 53 54 46
E-mail: [email protected]
www.wika.nl
Romania
WIKA Instruments Romania S.R.L.
Bucuresti
Tel.: (+40) 21-456 31 38
Fax: (+40) 21-456 31 37
E-mail: [email protected]
www.wika.ro
Egypt
WIKA Alexander Wiegand
GmbH & Co. KG
Nasr City, Cairo
Tel.: (+20) 2-227 33 140
Fax: (+20) 2-227 33 140
E-mail: [email protected]
Kazakhstan
TOO WIKA Kasachstan
Almaty
Tel.: (+7) 3272 33 08 48
Fax: (+7) 3272 78 99 05
E-mail: [email protected]
www.wika.kz
Mexico
Instrumentos WIKA México,
S.A. de C.V.
Álvaro Obregón
Tel.: (+52) 55 5020 5300
Fax: (+52) 55 5020 5301
E-mail: [email protected]
www.wika.com.mx
Bulgaria
WIKA Bulgaria EOOD
Sofia
Tel.: (+359) 2 82138-10
Fax: (+359) 2 82138-13
E-mail: [email protected]
www.wika.bg
Russia
ZAO “WIKA MERA”
Moskau
Tel.: (+7) 495-648 01 80
Fax: (+7) 495-648 01 81
E-mail: [email protected]
www.wika.ru
Korea
WIKA Korea Ltd.
Seoul
Tel.: (+82) 2-869 05 05
Fax: (+82) 2-869 05 25
E-mail: [email protected]
www.wika.co.kr
Finland
WIKA Finland Oy
Helsinki
Tel.: (+358) 9-682 49 20
Fax: (+358) 9-682 49 270
E-mail: [email protected]
www.wika.fi
Serbia
WIKA Merna Tehnika d.o.o.
Beograd
Tel.: (+381) 11 2763 722
Fax: (+381) 11-753 674
E-mail: [email protected]
www.wika.co.yu
Iran
WIKA Instrumentation Pars
Kish Ltd.
Tehran
Tel.: (+98) 21- 8852 6730 3
Fax: (+98) 21- 8875 7413
E-mail: [email protected]
www.wika.ir
France
WIKA Instruments s.a.r.l.
Eragny-sur-Oise
Tel.: (+33) 1/34 30 84 84
Fax: (+33) 1/34 30 84 94
E-mail: [email protected]
www.wika.fr
Spain
Instrumentos WIKA, S.A.
Sabadell (Barcelona)
Tel.: (+34) 902 902 577
Fax: (+34) 933 938 666
E-mail: [email protected]
www.wika.es
Germany - Head Office
WIKA Alexander Wiegand
GmbH & Co. KG
Klingenberg
Tel.: (+49) 9372 132-0
Fax: (+49) 9372 132-406
E-mail: [email protected]
www.wika.de
Switzerland
MANOMETER AG
Hitzkirch
Tel.: (+41) 41 919 72 72
Fax: (+41) 41 919 72 73
E-mail: [email protected]
www.manometer.ch
USA
WIKA Instrument Corporation
Lawrenceville, Georgia
Tel.: (+1) 770-513 8200
Fax: (+1) 770-338 5118
E-mail: [email protected]
www.wika.com
South America
Argentina
WIKA Argentina S.A.
Buenos Aires
Tel.: (+54) 11 4730-1800
Fax: (+54) 11 4761-0050
E-mail: [email protected]
www.wika.com.ar
Brazil
WIKA DO BRASIL
Iperó - SP
Tel.: (+55) 15 3459 9700
Fax: (+55) 15 3266 1650
E-mail: [email protected]
www.wika.com.br
Europe
Austria
WIKA Meßgerätevertrieb
Ursula Wiegand GmbH & Co. KG
Wien
Tel.: (+43) 1-8 69 16 31
Fax: (+43) 1-8 69 16 34
E-mail: [email protected]
www.wika.at
„„ Non-sparking version:
ATEX (EEx-n)
„„ Inline transition
„„ Retractable cord
„„ Strain relief spring
103-02028 11/2007 CA
Italy
WIKA Italiana SRL
Arese (Milano)
Tel.: (+39) 02-93 86 11
Fax: (+39) 02-93 86 174
E-mail: [email protected]
www.wika.it
Poland
Kujawska Fabryka Manometrow
Wloclawek
Tel.: (+48) 54230 11 00
Fax: (+48) 54230 11 01
E-mail: [email protected]
www.manometry.com.pl
Ukraine
WIKA Pribor GmbH
Donetsk
Tel.: (+38) 062 345-34-16
Fax: (+38) 062 345-34-17
E-mail: [email protected]
www.wika.donetsk.ua
United Kingdom
WIKA Instruments Limited
Merstham, Redhill
Tel.: (+44) (0) 1737 644 008
Fax: (+44) (0) 1737 644 403
E-mail: [email protected]
www.wika.co.uk
South Africa
WIKA Instruments (Pty.) Ltd.
Gardenview, Johannesburg
Tel.: (+27) 11-621 00 00
Fax: (+27) 11-621 00 59
E-mail: [email protected]
www.wika.co.za
United Arab Emirates
WIKA Middle East FZE
Jebel Ali, Dubai
Tel.: (+971) 4-883 90 90
Fax: (+971) 4-883 91 98
E-mail: [email protected]
Asia
China
WIKA International Trading
(Shanghai) Co., Ltd.
Shanghai
Tel.: (+86) 21 53 85 25 72
Fax: (+86) 21 53 85 25 75
E-mail: [email protected]
India
WIKA Instruments India Pvt. Ltd.
Wagholi, Pune
Tel.: (+91) 20-66293200
Fax: (+91) 20-66293325
E-mail: [email protected]
www.wika.co.in
Japan
WIKA Japan K.K.
Minato-ku, Tokyo
Tel.: (+81) 3-5439-6673
Fax: (+81) 3-5439-6674
E-mail: [email protected]
Malaysia
WIKA Instrumentation (M) Sdn Bhd
Puchong, Selangor
Tel.: (+03) 80631080
Fax: (+03) 80631070
E-mail: [email protected]
www.wika.com.my
Singapore
WIKA Instrumentation PTE. LTD.
Singapore
Tel.: (+65) 6844 55 06
Fax: (+65) 6844 55 07
E-mail: [email protected]
www.wika.com.sg
Taiwan
WIKA Instrumentation Taiwan Ltd.
Pinjen, Taoyuan
Tel.: (+886) 3 420 6052
Fax: (+886) 3 490 0080
E-mail: [email protected]
www.wika.com.tw
Australia
Australia
WIKA Australia Pty. Ltd.
Rydalmere NSW
Tel.: (+61) 2 8845 5222
Fax: (+61) 2 9684 4767
E-mail: [email protected]
www.wika.com.au
TC40
Industrial Thermocouple Sensor
Part of Your Business
TC40
Part
Number
TC40 Industrial Thermocouple Sensor
1
M
extensive range of elements, terminations, and process connections can
2
be individually selected for the appropriate application. With their flexibility
Electrical approval
and the small diameters in which they are available, TC40 thermocouples
can be used in locations that are not easily accessible.
B
EEx-i (ATEX) gas/dust, acc. to
directive 94/9/EC
H
EEx-n (ATEX) acc. to directive
94/9/EC
D
EEx-i, confirmation NAMUR NE24
Z
Without
3
3
4
5
Fitting style
6
7
8
9
10
12
Straight
„„ Automotive industries
4
45 degree bend
„„ Chemical and petrochemical industries
9
90 degree bend
Fitting material
9
Element
17
18
19
20
21
14
Termination
16
22
Miscellaneous options
Stainless steel 316 (1.4401)
1
Type K (NiCr-Ni) / 0...+1260 °C
1
Stripped leads
S
Strain relief spring
B
Stainless steel 316 Ti (1.4571)
2
Type K (NiCr-Ni) / 0...+600 °C
2
Spade lugs
R
Retractable cord
Z
Without
3
Type J (Fe-CuNi) / 0...+760 °C
3
Standard plug 2-pin (male)
I
Inline transition
4
Type J (Fe-CuNi) / 0...+300 °C
4
Mini plug 2-pin (male)
Z
Without
A
High temperature standard plug
2-pin (male)
C
Compression fitting with Teflon®
ferrule
D
Compression fitting, spring loaded,
with stainless steel ferrule
L
7
Compression fitting, spring loaded,
with Teflon® ferrule
Fixed fitting, double threaded hex
bushing
Spring loaded bushing without oil
seal
K
Spring loaded bushing with oil seal
G
Union nut
H
Swivel nut
Z
Without
Thread size
K
1/2 NPT
Sensor diameter
5
Type N (NiCrSi-NiSi) / 0...+1260 °C
1
1/4 inch / 0.250 inch (6.35 mm)
6
Type N (NiCrSi-NiSi) / 0...+600 °C
4
3/16 inch / 0.188 inch (4.75 mm)
7
Type E (NiCr-CuNi) / 0...+870 °C
B
High temperature mini plug 2-pin
(male)
2
1/8 inch / 0.125 inch (3.17 mm)
8
Type E (NiCr-CuNi) / 0...+400 °C
5
Standard jack 2-pin (female)
5
1/16 inch / 0.063 inch (1.59 mm)
9
Type T (Cu-CuNi) / -200...+370 °C
6
Mini jack 2-pin (female)
8
3/8 inch / 0.375 inch (9.53 mm)
7
Standard solid pin plug 2-pin (male)
7
1/25 inch / 0.040 inch (1.02 mm)
F
Lemosa plug size 1 S (male)
6
1/50 inch / 0.020 inch (0.51 mm)
1
Single
G
Lemosa plug size 2 S (male)
D
6.0 mm
2
Dual
I
Lemosa plug size 1 S (female)
J
Lemosa plug size 2 S (female)
10
Number of sensors
W-Dimension (W)
*****
ZZZZZ
18
Please specify (e.g. 84 mm = 00084)
(e.g. 9.5 inch = 00095)
Without
X-Dimension (X)
****
ZZZZ
Please specify (e.g. 84 mm = 0084)
(e.g. 9.5 inch = 0950)
Without
B
3.0 mm
4.5 mm
Q
1.6 mm
8
ISA standard to ANSI MC96.1-1982
N
1.5 mm
9
ISA special to ANSI MC96.1-1982
F
Cord grip
Class 2 per DIN EN 60584
A
Braze adapter
Class 1 per DIN EN 60584
C
Cable clamp
D
Cable clamp and weatherproof boot
E
Dual compression adapter
G
Hex crimp adapter
H
Hex crimp adapter and
weatherproof boot
1
Quality certificates
I
Compression adapter
Z
Without
J
Compression adapter and
weatherproof boot
K
Wire clamp
T
Additional text
L
Wire clamp and weatherproof boot
Z
Without
M
Mini wire clamp
Z
Without
11
Classification tolerance
1.0 mm
„„ Energy and power plant technology
N
1/4 NPT
O
0.5 mm
1
„„ Furnaces, kilns, ovens and boilers
X
3/8 NPT
A
2.0 mm
„„ Heat treating
W
1/8 NPT
E
8.0 mm
F
G 1/2 B
8
17
C
P
12
Sheath material
Measuring point
1
Ungrounded
2
Grounded
3
Exposed
C
G 3/4 B
R
G 1/4 B
P
Stainless steel 316 / 316 L (1.4401
/ 1.4435)
„„ Plastics and rubber industries
D
G 1/8 B
O
Stainless steel 310 (1.4841)
„„ Power and utilities
P
M14 x 1.5
J
Inconel® 600 (2.4816)
N
PVC jacket
„„ Pulp and paper
O
M18 x 1.5
T
Stainless steel 446 (1.4762)
O
PVC jacket, shielded
Z
Without
„„ Water and wastewater treatment
16
A
3/4 NPT
„„ Turbines
15
B
J
„„ Smelting
14
Compression fitting with stainless
steel ferrule
I
5
6
2
„„ Machinery, plant and tank measurement
13
Fixed fitting, threaded hex bushing
E
Sensor design
0
„„ Incinerators
11
A
Metric
EEx-i (ATEX) gas, acc. to directive
94/9/EC
„„ Engine cylinder heads and oil sumps
4
Imperial
A
(~25 mm)
2
Note: Some configurations are unavailable. Your WIKA sales person will notify you if you have made an incorrect selection
TC40-XXXXXXXX-XXXX-XXXXXXXXXXXXXXXXXXXXXX-XX
Unit of measure
I
all applications where metal sheathed thermocouples are required. An
TC40 series sensors are suitable for all industrial and
commercial applications including:
1
Code
TC40 series thermocouples are custom industrial sensors designed to suit
Applications:
Create your product part number by selecting the appropriate assembly items from each of the
categories below. Enter the item code into the applicable box to generate the part number.
13
Lead wire insulation
I
Hastelloy® X (2.4665)
D
PVC armour over Teflon®
H
Hastelloy® C276 (2.4819)
J
Silicon jacket
M
Silicon jacket, shielded
T
Teflon® jacket
L
Teflon® jacket, shielded
S
Stainless steel braid over Teflon®
G
Teflon® armour over Teflon®
F
Individual Teflon® leads
B
Armoured Teflon®
H
Fibreglass jacket
E
Teflon® armour over fibreglass
K
Stainless steel braid over fibreglass
C
Individual fibreglass leads
A
Armoured fibreglass
P
MI-cable conductor wire
15
19
Termination accessories
Y-Dimension (Y)
****
ZZZZ
20
22
Without
A-Dimension (A)
*****
21
Please specify (e.g. 84 mm = 0084)
(e.g. 9.5 inch = 0095)
Please specify (e.g. 84 mm = 00084)
(e.g. 9.5 inch = 00950)
Certificates
Additional order details
Part of Your Business
TC40
Part
Number
TC40 Industrial Thermocouple Sensor
1
M
extensive range of elements, terminations, and process connections can
2
be individually selected for the appropriate application. With their flexibility
Electrical approval
and the small diameters in which they are available, TC40 thermocouples
can be used in locations that are not easily accessible.
B
EEx-i (ATEX) gas/dust, acc. to
directive 94/9/EC
H
EEx-n (ATEX) acc. to directive
94/9/EC
D
EEx-i, confirmation NAMUR NE24
Z
Without
3
3
4
5
Fitting style
6
7
8
9
10
12
Straight
„„ Automotive industries
4
45 degree bend
„„ Chemical and petrochemical industries
9
90 degree bend
Fitting material
9
Element
17
18
19
20
21
14
Termination
16
22
Miscellaneous options
Stainless steel 316 (1.4401)
1
Type K (NiCr-Ni) / 0...+1260 °C
1
Stripped leads
S
Strain relief spring
B
Stainless steel 316 Ti (1.4571)
2
Type K (NiCr-Ni) / 0...+600 °C
2
Spade lugs
R
Retractable cord
Z
Without
3
Type J (Fe-CuNi) / 0...+760 °C
3
Standard plug 2-pin (male)
I
Inline transition
4
Type J (Fe-CuNi) / 0...+300 °C
4
Mini plug 2-pin (male)
Z
Without
A
High temperature standard plug
2-pin (male)
C
Compression fitting with Teflon®
ferrule
D
Compression fitting, spring loaded,
with stainless steel ferrule
L
7
Compression fitting, spring loaded,
with Teflon® ferrule
Fixed fitting, double threaded hex
bushing
Spring loaded bushing without oil
seal
K
Spring loaded bushing with oil seal
G
Union nut
H
Swivel nut
Z
Without
Thread size
K
1/2 NPT
Sensor diameter
5
Type N (NiCrSi-NiSi) / 0...+1260 °C
1
1/4 inch / 0.250 inch (6.35 mm)
6
Type N (NiCrSi-NiSi) / 0...+600 °C
4
3/16 inch / 0.188 inch (4.75 mm)
7
Type E (NiCr-CuNi) / 0...+870 °C
B
High temperature mini plug 2-pin
(male)
2
1/8 inch / 0.125 inch (3.17 mm)
8
Type E (NiCr-CuNi) / 0...+400 °C
5
Standard jack 2-pin (female)
5
1/16 inch / 0.063 inch (1.59 mm)
9
Type T (Cu-CuNi) / -200...+370 °C
6
Mini jack 2-pin (female)
8
3/8 inch / 0.375 inch (9.53 mm)
7
Standard solid pin plug 2-pin (male)
7
1/25 inch / 0.040 inch (1.02 mm)
F
Lemosa plug size 1 S (male)
6
1/50 inch / 0.020 inch (0.51 mm)
1
Single
G
Lemosa plug size 2 S (male)
D
6.0 mm
2
Dual
I
Lemosa plug size 1 S (female)
J
Lemosa plug size 2 S (female)
10
Number of sensors
W-Dimension (W)
*****
ZZZZZ
18
Please specify (e.g. 84 mm = 00084)
(e.g. 9.5 inch = 00095)
Without
X-Dimension (X)
****
ZZZZ
Please specify (e.g. 84 mm = 0084)
(e.g. 9.5 inch = 0950)
Without
B
3.0 mm
4.5 mm
Q
1.6 mm
8
ISA standard to ANSI MC96.1-1982
N
1.5 mm
9
ISA special to ANSI MC96.1-1982
F
Cord grip
Class 2 per DIN EN 60584
A
Braze adapter
Class 1 per DIN EN 60584
C
Cable clamp
D
Cable clamp and weatherproof boot
E
Dual compression adapter
G
Hex crimp adapter
H
Hex crimp adapter and
weatherproof boot
1
Quality certificates
I
Compression adapter
Z
Without
J
Compression adapter and
weatherproof boot
K
Wire clamp
T
Additional text
L
Wire clamp and weatherproof boot
Z
Without
M
Mini wire clamp
Z
Without
11
Classification tolerance
1.0 mm
„„ Energy and power plant technology
N
1/4 NPT
O
0.5 mm
1
„„ Furnaces, kilns, ovens and boilers
X
3/8 NPT
A
2.0 mm
„„ Heat treating
W
1/8 NPT
E
8.0 mm
F
G 1/2 B
8
17
C
P
12
Sheath material
Measuring point
1
Ungrounded
2
Grounded
3
Exposed
C
G 3/4 B
R
G 1/4 B
P
Stainless steel 316 / 316 L (1.4401
/ 1.4435)
„„ Plastics and rubber industries
D
G 1/8 B
O
Stainless steel 310 (1.4841)
„„ Power and utilities
P
M14 x 1.5
J
Inconel® 600 (2.4816)
N
PVC jacket
„„ Pulp and paper
O
M18 x 1.5
T
Stainless steel 446 (1.4762)
O
PVC jacket, shielded
Z
Without
„„ Water and wastewater treatment
16
A
3/4 NPT
„„ Turbines
15
B
J
„„ Smelting
14
Compression fitting with stainless
steel ferrule
I
5
6
2
„„ Machinery, plant and tank measurement
13
Fixed fitting, threaded hex bushing
E
Sensor design
0
„„ Incinerators
11
A
Metric
EEx-i (ATEX) gas, acc. to directive
94/9/EC
„„ Engine cylinder heads and oil sumps
4
Imperial
A
(~25 mm)
2
Note: Some configurations are unavailable. Your WIKA sales person will notify you if you have made an incorrect selection
TC40-XXXXXXXX-XXXX-XXXXXXXXXXXXXXXXXXXXXX-XX
Unit of measure
I
all applications where metal sheathed thermocouples are required. An
TC40 series sensors are suitable for all industrial and
commercial applications including:
1
Code
TC40 series thermocouples are custom industrial sensors designed to suit
Applications:
Create your product part number by selecting the appropriate assembly items from each of the
categories below. Enter the item code into the applicable box to generate the part number.
13
Lead wire insulation
I
Hastelloy® X (2.4665)
D
PVC armour over Teflon®
H
Hastelloy® C276 (2.4819)
J
Silicon jacket
M
Silicon jacket, shielded
T
Teflon® jacket
L
Teflon® jacket, shielded
S
Stainless steel braid over Teflon®
G
Teflon® armour over Teflon®
F
Individual Teflon® leads
B
Armoured Teflon®
H
Fibreglass jacket
E
Teflon® armour over fibreglass
K
Stainless steel braid over fibreglass
C
Individual fibreglass leads
A
Armoured fibreglass
P
MI-cable conductor wire
15
19
Termination accessories
Y-Dimension (Y)
****
ZZZZ
20
22
Without
A-Dimension (A)
*****
21
Please specify (e.g. 84 mm = 0084)
(e.g. 9.5 inch = 0095)
Please specify (e.g. 84 mm = 00084)
(e.g. 9.5 inch = 00950)
Certificates
Additional order details
WIKA worldwide
North America
Europe
Canada
WIKA Instruments Canada Ltd.
Edmonton, Alberta
Tel.: (+1) 780 463 7035
Fax: (+1) 780 462 0017
E-mail: [email protected]
www.wika.ca
Austria
WIKA Meßgerätevertrieb
Ursula Wiegand GmbH & Co. KG
Wien
Tel.: (+43) 1-8 69 16 31
Fax: (+43) 1-8 69 16 34
E-mail: [email protected]
www.wika.at
Mexico
Instrumentos WIKA México,
S.A. de C.V.
Álvaro Obregón
Tel.: (+52) 55 5020 5300
Fax: (+52) 55 5020 5301
E-mail: [email protected]
www.wika.com.mx
Benelux
WIKA Benelux
Echt
Tel.: (+31) 475 53 55 00
Fax: (+31) 475 53 54 46
E-mail: [email protected]
www.wika.nl
USA
WIKA Instrument Corporation
Lawrenceville, Georgia
Tel.: (+1) 770 513 8200
Fax: (+1) 770 338 5118
E-mail: [email protected]
www.wika.com
Bulgaria
WIKA Bulgaria EOOD
Sofia
Tel.: (+359) 2 82138-10
Fax: (+359) 2 82138-13
E-mail: [email protected]
www.wika.bg
USA
WIKA Instrument Corporation
Houston Facility
Deer Park, Texas
Tel.: (+1) 713 475 0022
Fax: (+1) 713 475 0011
E-mail: [email protected]
www.wika.com
Finland
WIKA Finland Oy
Helsinki
Tel.: (+358) 9-682 49 20
Fax: (+358) 9-682 49 270
E-mail: [email protected]
www.wika.fi
South America
Argentina
WIKA Argentina S.A.
Buenos Aires
Tel.: (+54) 11 4730-1800
Fax: (+54) 11 4761-0050
E-mail: [email protected]
www.wika.com.ar
Brazil
WIKA DO BRASIL
Iperó - SP
Tel.: (+55) 15 3459 9700
Fax: (+55) 15 3266 1650
E-mail: [email protected]
www.wika.com.br
France
WIKA Instruments s.a.r.l.
Eragny-sur-Oise
Tel.: (+33) 1/34 30 84 84
Fax: (+33) 1/34 30 84 94
E-mail: [email protected]
www.wika.fr
Germany - Head Office
WIKA Alexander Wiegand
GmbH & Co. KG
Klingenberg
Tel.: (+49) 9372 132-0
Fax: (+49) 9372 132-406
E-mail: [email protected]
www.wika.de
Italy
WIKA Italiana SRL
Arese (Milano)
Tel.: (+39) 02-93 86 11
Fax: (+39) 02-93 86 174
E-mail: [email protected]
www.wika.it
Asia
Africa/Middle East
Poland
Kujawska Fabryka Manometrow
Wloclawek
Tel.: (+48) 54230 11 00
Fax: (+48) 54230 11 01
E-mail: [email protected]
www.manometry.com.pl
China
WIKA International Trading
(Shanghai) Co., Ltd.
Shanghai
Tel.: (+86) 21 53 85 25 72
Fax: (+86) 21 53 85 25 75
E-mail: [email protected]
Egypt
WIKA Alexander Wiegand
GmbH & Co. KG
Nasr City, Cairo
Tel.: (+20) 2-227 33 140
Fax: (+20) 2-227 33 140
E-mail: [email protected]
Romania
WIKA Instruments Romania S.R.L.
Bucuresti
Tel.: (+40) 21-456 31 38
Fax: (+40) 21-456 31 37
E-mail: [email protected]
www.wika.ro
India
WIKA Instruments India Pvt. Ltd.
Wagholi, Pune
Tel.: (+91) 20-66293200
Fax: (+91) 20-66293325
E-mail: [email protected]
www.wika.co.in
Russia
ZAO “WIKA MERA”
Moskau
Tel.: (+7) 495-648 01 80
Fax: (+7) 495-648 01 81
E-mail: [email protected]
www.wika.ru
Japan
WIKA Japan K.K.
Minato-ku, Tokyo
Tel.: (+81) 3-5439-6673
Fax: (+81) 3-5439-6674
E-mail: [email protected]
Iran
WIKA Instrumentation Pars
Kish Ltd.
Tehran
Tel.: (+98) 21- 8852 6730 3
Fax: (+98) 21- 8875 7413
E-mail: [email protected]
www.wika.ir
Serbia
WIKA Merna Tehnika d.o.o.
Beograd
Tel.: (+381) 11 2763 722
Fax: (+381) 11-753 674
E-mail: [email protected]
www.wika.co.yu
Spain
Instrumentos WIKA, S.A.
Sabadell (Barcelona)
Tel.: (+34) 902 902 577
Fax: (+34) 933 938 666
E-mail: [email protected]
www.wika.es
Switzerland
MANOMETER AG
Hitzkirch
Tel.: (+41) 41 919 72 72
Fax: (+41) 41 919 72 73
E-mail: [email protected]
www.manometer.ch
Ukraine
WIKA Pribor GmbH
Donetsk
Tel.: (+38) 062 345-34-16
Fax: (+38) 062 345-34-17
E-mail: [email protected]
www.wika.donetsk.ua
United Kingdom
WIKA Instruments Limited
Merstham, Redhill
Tel.: (+44) (0) 1737 644 008
Fax: (+44) (0) 1737 644 403
E-mail: [email protected]
www.wika.co.uk
Kazakhstan
TOO WIKA Kasachstan
Almaty
Tel.: (+7) 3272 33 08 48
Fax: (+7) 3272 78 99 05
E-mail: [email protected]
www.wika.kz
Korea
WIKA Korea Ltd.
Seoul
Tel.: (+82) 2-869 05 05
Fax: (+82) 2-869 05 25
E-mail: [email protected]
www.wika.co.kr
Malaysia
WIKA Instrumentation (M) Sdn Bhd
Puchong, Selangor
Tel.: (+03) 80631080
Fax: (+03) 80631070
E-mail: [email protected]
www.wika.com.my
Singapore
WIKA Instrumentation PTE. LTD.
Singapore
Tel.: (+65) 6844 55 06
Fax: (+65) 6844 55 07
E-mail: [email protected]
www.wika.com.sg
Taiwan
WIKA Instrumentation Taiwan Ltd.
Pinjen, Taoyuan
Tel.: (+886) 3 420 6052
Fax: (+886) 3 490 0080
E-mail: [email protected]
www.wika.com.tw
South Africa
WIKA Instruments (Pty.) Ltd.
Gardenview, Johannesburg
Tel.: (+27) 11-621 00 00
Fax: (+27) 11-621 00 59
E-mail: [email protected]
www.wika.co.za
United Arab Emirates
WIKA Middle East FZE
Jebel Ali, Dubai
Tel.: (+971) 4-883 90 90
Fax: (+971) 4-883 91 98
E-mail: [email protected]
Australia
Australia
WIKA Australia Pty. Ltd.
Rydalmere NSW
Tel.: (+61) 2 8845 5222
Fax: (+61) 2 9684 4767
E-mail: [email protected]
www.wika.com.au

Similar documents

Chipping Hammers

Chipping Hammers TC-10 through TC-40 Series (W) Pistol Grip

More information

re82 temperature controller e i o

re82 temperature controller e             i         o Measurement of heater current and check of heater overheating or shortening of the control element (e.g. SSR).

More information