2016 JDM MEDICAL CATALOG

Transcription

Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
resident specific positioning
2016 JDM MEDICAL CATALOG
Since 1989 JDM Medical has benefited from the input of hundreds
of therapists and other health care professionals. This accumulated
knowledge, which we refer to as “resident-specific” positioning, is the
driving force behind JDM’s approach to manufacturing for long-term care.
This approach puts forth the concept that each patient’s needs, body type,
environment, abilities and disabilities are unique; therefore, each piece of
equipment should be just as unique.
As always, we are indebted to each of you for your continued
support and assistance. It is our privilege, and indeed our mission, to
be viewed as your manufacturing arm.
Page 1
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Table of Contents
Introduction
How Do You Code A Cushion?
Product Codes and Feature Codes
Statement of Materials
Fabric Specifications
Policies and Procedures
Wheelchair Section
Anti-Hammocking Cushions & Wedges - Considerations
Anti-Hammocking Cushions
Anti-Hammocking Wedges
Anti-Hammocking Ischial-Step Wedges
Anti-Hammocking Coccyx Cutout Cushions with Anti-Skid Bottom
Anti-Hamm. Cushions with Coccyx Scoop & Medial Thigh Separator
Anti-Hamm Ischial Step with Coccyx Scoop & Medial Thigh Separator
Anti-Hammocking Flexible Pelvic-Obliquity Wedges
Anti-Hammocking Fixed Pelvic-Obliquity Wedges
Anti-Hammocking Bariatric Cushions & Wedges
Gel-Foam Cushion & Wedges - Considerations
Gel-Foam Flat Cushions
Gel-Foam Wedges
Gel-Foam Ischial Steps
Gel-Foam Coccyx-Scoop
Gel-Foam Ischial Step with Coccyx Scoop and Medial Thigh Separator
Solid-Insert Cushions & Wedges - Considerations
Solid-Insert Flat Cushions
Solid-Insert Wedges
Solid-Insert Ischial-Step Wedges
Solid-Insert Coccyx Cutouts
Solid-Insert Coccyx Scoops with Medial Thigh Separator & Visco
Solid-Insert Ischial Step with Coccyx Scoop & Medial Thigh Separator
Solid-Insert Flexible Pelvic-Obliquity Cushions
Solid-Insert Cushions with Lateral Elevated Wings
Solid-Insert Amputee Cushions
Solid-Insert Amputee Flip-Down Cushions
Solid-Insert Adjustable Amputee Support
Drop Seats and Drop-Seat Cushions & Wedges - Considerations
Drop Seats
Drop-Seat Cushions
Drop-Seat Wedges
Drop-Seat Ischial-Step Wedges
Drop-Seat Coccyx Scoops
Drop-Seat Ischial Step with Coccyx Scoop & Medial Thigh Separator
Drop-Seat Coccyx Cutouts
Page 2
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
21
22-23
24-25
26-27
28-29
30-31
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Table of Contents
Drop-Seat Flexible Pelvic-Obliquity Cushions
Bariatric Drop Seats
Bariatric Drop-Seat Cushions & Wedges
Back Devices for Wheelchairs - Considerations
Wedged Back Pad
Contoured Back Pad
Cozie Back
Cozie Back with Lateral Supports
Cozie Back Swing-Away Lateral Supports
HAV-A-Back
HAV-A-Back with Lateral Supports
Bariatric Back Support with Gluteus Contour
Bariatric T-Cushions for Bariatric Back Supports
Kyphotic Back Support
Extended Back Support
Adjustable Lateral Supports
Lateral Wedges
Cylinder Lumbar Rolls (Full & Half)
Winged Head Support
Head Supports
Strap Backs
Lateral Supports:
Slip-On Wheelchair Arm/Lateral Body Support
Static Arm Trough
Articulating Arm Trough
Static Lap Tray
Flip-Away Lap Tray Solid Bolsters
Wheelchair Arm/Lateral Bolsters
Slip-On Arm Bolsters for Wheelchair
Slip-On Leg Bolsters for Wheelchair
Rectangular Bolsters
Hip Bolsters
Lateral Supports for Wheelchair
Short-Arm Lateral Bolsters
Foot and Calf Supports:
Flexible Calf Support
Slip-On Foot and Calf Pad
Foot Rest Covers
Wheelchair Foot Boxes
Easy Foot Cradle
Adjustable Knee Adductor
Leg Abductor
Page 3
53
54
55
57
58
59
60
61
62-63
64
65
66
67
68
69
70
71
72
72
73
74-75
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Table of Contents
Flip-Down Abductor Solid-Back Foot and Calf Support
Solid-Back Foot and Calf Support
Solid-Back Calf Support with Heel Cutouts
Solid-Back Foot and Calf Support with Abductor
Geri Chair Section:
Geri Chair Torso Supports
Head Supports for Geri Chairs
Cervical Pillows
Geri Chair Wedges & Ischial Steps
Abducted Knee Lift
Lateral Supports for Geri Chair
Foot Box for Geri Chair
Slip-On Arm Bolsters for Geri Chair
Lumbar Roll for Geri Chair Torso Support
Bed Section:
Fall Mat
Side-Lying Leg and Knee Abductor
Side-Lying Wedge
Double Side-Lying Wedge
Bed Bolsters
Full-Length Bed Wedges
Mattress Cover with Perimeter Bolsters
Covered Bed Rail Pads
Bed Rail Bolsters
Cropped Visco Mattress Topper with Incontinent, Washable Cover
Hip Abductors
Supine Heel Elevators
Head & Foot Board Gap Fillers
Contracture Relief Section - Considerations
Resident-Specific Knee Wedge
Knee Wedge for Extended Range & Heel Decub
Knee Wedge for Ext. Range, Heel Decub & Foot Drop
Resident-Specific Knee Flexion Inhibitor
Contrac-Tree
Resident-Specific Arm Flexion Inhibitor
Kits:
Geri-Chair Kit
HTR Conversion Kit
Reclining Back Wheelchair Kit
Broda Kit
Hemi Height Kit
Gait Belts
Order Form
Page 4
98-99
100
101
102
103
104
105
106
107
108
109
110
110
111
112
113
114
115
116
117
118
119
120
121
122
123
125
126
127
128
129
130
131
133
134
135
136
137
138
139
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
How Do You Code A Cushion?
JDM uses a code system to specify our products. This system is very easy and useful to
both the party ordering and the party taking the order. The system attempts to ensure that no
mistakes are made during the ordering process.
The Code system uses the product code, which defines the type of product (please see page
6), followed by measurements, such as the thickness, the width, and/or the depth of the item,
followed by the feature codes (please see page 6).
The following is an example of how JDM codes its products:
Example : Item # 031816-AH-AS-V
Your resident needs a flat cushion that is 3-inches thick. The wheelchair measures 18”
wide by 16” deep. You would like the cushion to be Anti-Hammocking with a layer of
Visco on top and an Anti-Skid Bottom. The order of JDM’s coding system is as follows:
Product Code (followed by) Measurements (followed by) Feature Code(s)
0
31816
-AH-AS-V
(See page 6 for
(Order of Measurements:
(List in Alphabetical Order;
Product Codes)
Thickness of Cushion
Add a Dash Between
X Width X Depth)
Each Feature Code)
For the example listed above, the cushion is designated as “0” for the product code
(see page 6 for list of product codes). The product code would be followed by the measurements of the cushion: 3 is the thickness of the wedge. Next, the “18” is the width
of the cushion and of the wheelchair and the “16” is the depth of the cushion and of the
wheelchair. The -AH-AS-V are the added feature codes ( -AH = Anti-Hammocking;
-AS = Anti-Skid Bottom; and -V = Visco (see page 6 for feature codes).
Page 5
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Product and Feature Codes
Product Codes (Always First No.) :
Feature Codes:
0 - Cushion
AH -
Anti-Hammocking AML - Amputee Cushion (Left Amputee)
1 - Wedge
AMR - Amputee Cushion (Right Amputee)
2 - Bolster
3 - Back Support
4 - Lower Extremity Foot and Calf Devices
5 - Hip Bolsters
6 - Lower Extremity Abductors
AS -
Anti-Skid Bottom
CB -
Cozie Back
CV -
Cutout with Visco (Any Type)
CS -
Coccyx Scoop & Medial Thigh Separator
D
-
Drop Seat Cushion
F
-
Flip Down Abductor
I
-
Ischial Step
7 - Drop Seats/Anti-Hammocking
M -
Medial Thigh Separators
8 - Geri-Chair Devices
POL -
Pelvic Obliquity (For Left Hip)
POR -
Pelvic Obliquity (For Right Hip)
9 - Mattresses, Pads, Etc.
SALS - Swing-Away Lateral Supports
SP -
Specialized Device
T
-
Torso Support Device
V
-
Visco
12 - Upper Extremity Contracture Devices
V2
-
Extra Layer of Visco
13 - Lower Extremity Contracture Devices
WL
- Wing (For Left Side)
WR
- Wing (For Right Side)
WB
- Wings (For Both Sides)
10 - Bed Wedges
11 - Foot Elevators
15 - Lap Trays
Page 6
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Statement of Materials
I. SUBSTRATES:
A. Polyurethane Foams
All polyurethanes used by JDM meet or exceed California 117B Fire retardancy testing. JDM uses
two types of polyurethanes:
1) HR (High Resiliency) has excellent longevity and buoyancy properties with minimal pressure
redistribution capability. This type of polyurethane is most often found in high-dollar furniture for
its “cushioning” capabilities.
2) G.I.V.E. (Gel-Infused Visco Elastic) has exceptional pressure redistribution properties.
This material was introduced to the medical industry in 2011 by JDM. This Visco Elastic
Polyurethane has 28% of its content composed of Gel “Micro Beads,” which are infused right into
the Visco. This combination Gel and Visco is considered by many to be perfect for LTC.
Why use Visco?
Hard, flat surfaces often cause high local pressure and instability.
Stability
Visco foam molds to the shape of the resident’s body. This ability, coupled with its pressure
and shock-reducing properties, makes it an excellent material for seating devices, back supports, bed positioning devices and contracture relief devices. Visco is recommended anytime there is a skin integrity problem.
B. Gel
JDM will add an additional thin layer of Gel to Bariatric cushions. This layer of gel is in addition to
the HR base and layer of G.I.V.E. (for pressure redistribution).
(Continued on next page.)
Page 7
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Statement of Materials (Continued)
II. COVERING:
Devices manufactured by JDM Medical are covered in a material that is incontinent proof,
antibacterial, anti-fungal, self-deodorizing, stain-resistant and flame retardant.
Antibacterial/Antifungal
Vital contribution to infection control. The patented dual-agent, antimicrobial system
has been proven effective in decreasing the potential problems of cross infection by
reducing the growth of both Gram positive and Gram negative organisms, such as
Staphylococcus aureus, Klebsiella pneumoniae, and Legionella pneumophilia on the
fabrics’ non-allergenic surfaces.
Flame Retardant
Resists combustion and will self-extinguish when the source of flame is removed. This
provides an extra measure of protection against the ever present dangers of accidental
fires. Approved or registered by every major fire regulatory agency.
Antistatic
Anstat, an enduring antistatic property that prevents the buildup or retention of electrostatic charges that could interfere with the functioning of sensitive life support
equipment. Meets NFPA standards.
Non-Absorbent
Fluid proof and serve as an impermeable barrier that guards against “hidden” contamination caused by the seep-through of liquids and patient discharges. Virtually unaffected by exposure to excreta, urine, blood, and commonly used medications.
The fabrics will not crack or become brittle.
Self-Deodorizing
Self-sanitizing and eliminate undesirable organic odors by inhibiting the growth of
odor-forming surface bacteria. This is another key contribution to both the comfort
of the patient and the attending personnel.
Simplified Maintenance
Resists unsightly stains. Most medications, oils, greases and contaminants wipe
clean with water, mild detergents and/or properly diluted disinfectants and germicides. Soil and stain resistant properties minimize labor, work time, and
maintenance costs for housekeeping.
Longer Lasting
Made to withstand severe physical and environmental abuse and are resistant to
wear, tear, and excessive punishment. This results in extended product life with
fewer replacements, reduced inventories, and greater overall economy.
Comfortable
Designed for maximum comfort. Specially textured diamond patterned surfaces
reduce heat buildup and alleviate skin irritation by channeling off perspiration
vapors and permitting air to circulate beneath the patient.
Page 8
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Policies and Procedures
Warranty:
Stock items may be returned for credit within the first 30 days following
the invoice date. Custom and Specially-Designed devices which have
been manufactured in accordance with your requests are not restockable and may not be returned for credit. You may return custom
devices for modification. Each modification is unique, so please
call for a modification fee (normally 25% of initial cost).
Return Policy:
If there is a need to return a restockable device, please call JDM within
30 days of the purchase date. You will be assigned a Return Authorization (R.A.) Number and will receive instructions for returning the merchandise. Returns without the R.A. number are not accepted and will
automatically be returned at freight costs to you. Returns are subject
to a 20 percent restocking fee.
We are unable to accept the return of any device that has been
marked upon or damaged by the customer.
Credit Memos are issued when the devices are returned to and
received by JDM.
Normal Terms:
Freight:
C.O.D. or Net 30 with approved credit
F.O.B. Pace, FL, unless otherwise quoted
Lead Times:
Stock Items:
2 full working days from receipt
and approval of order
Customized Items:
3 to 5 working days from receipt
Modified Items:
3 to 5 full working days from receipt
Customer Service Hours: Monday - Friday; 8:00am - 4:30pm, CST
Page 9
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
NOTES: _____________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Page 10
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
ANTI-HAMMOCKING CUSHIONS AND WEDGES
Considerations when utilizing Anti-Hammocking Cushions or
Wedges:
1. The Anti-Hammocking bottom is convex to eliminate the hammocking
effect of a sling-bottom wheelchair.
2. The convex bottom allows the patient to sit lower than if they were seated
on a solid-insert equivalent.
3. The removal of the solid insert in conjunction with adding Visco layering
increases comfort without substantially increasing height. Example: A 4-inch
cushion with 2 inches of Visco and 2 inches of HR Foam will sit like a
2 1/2-inch cushion.
4. All of JDM’s Anti-Hammocking Cushions have Velcro strapping to prevent
the cushions from twisting and sliding.
5. All of JDM’s Anti-Hammocking Cushions have a rubberized anti-skid
bottom to further prevent the cushion from sliding, as well as to prevent the
wheelchair’s upholstery tubing from “rubbing” into the fabric.
6. By utilizing JDM’s feature code system, the cushion or wedge may be
modified to accommodate many of the problems found in long-term care.
Page 11
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Cushions
Measurement Instructions for Customized
Anti-Hammocking Cushions:
In order to customize a cushion’s height, width, or
depth from our stock items, please copy page; fill in
the blanks and fax to JDM.
A. __________” thickness of cushion
(minimum for “A” is 2 inches)
B. __________” width of cushion
C. __________” depth of cushion
Example 021816-AH-AS
(2” x 18” Wide x 16 “ Deep
Anti-Hammocking Cushion )
The Anti-Hammocking Cushion is particularly
effective when used with residents who are currently
able to maneuver their wheelchairs by foot movement.
Many wedges and cushions have solid inserts, thereby
elevating the resident up too high, thus causing the
resident to lose mobility. Because the Anti-Hammocking bottom is convex, the health care professional
may cushion and position without taking away the
resident’s ability to foot propel. All Anti-Hammocking
Cushions come with an Anti-Skid bottom and Velcro
straps to prevent the cushion from sliding in the
wheelchair.
Code#
For 16” Wide Wheelchair
Description
(Thickness x Width x Depth)
021616-AH-AS
031616-AH-AS
041616-AH-AS
031616-AH-AS-V
041616-AH-AS-V
2” x 16” x 16” (HR Only)
3” x 16” x 16” (HR Only)
4” x 16” x 16” (HR Only)
3” (2” HR & 1” Visco) x 16” x 16” (Sits like 2-inch)
021816-AH-AS
031816-AH-AS
041816-AH-AS
031816-AH-AS-V
041816-AH-AS-V
2” x 18” x 16” (HR Only)
3” x 18” x 16” (HR Only)
4” x 18” x 16” (HR Only)
Prices are subject to change without notice.
Page 12
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Wedges
Anti-Hammocking Wedges:
In order to customize a cushion’s height, width, or
depth from our stock items, please copy page; fill in
the blanks and fax to JDM.
A. __________” thickness at “front edge” of cushion
Example 1321816-AH-AS-V
(3” to 2” x 18” Wide x 16 “ Deep
Anti-Hammocking Cushion
With Anti-Skid Bottom & Visco)
B. __________” thickness at “back edge” of cushion
C. __________” width of cushion
D. __________” depth of cushion
The Anti-Hammocking bottom of this
wedge eliminates the hammocking (or sling)
effect of vinyl-bottomed wheelchairs. The
wedge shape inhibits forward leaning and
sacral sitting. HR polyurethane provides
comfort and durability for the long-term care
environment. All Anti-Hammocking Wedges
come with an Anti-Skid bottom and Velcro
straps to prevent the cushion from sliding in
the wheelchair.
Price List (Stock Items)
Code#
Description
1321616-AH-AS
1421616-AH-AS
1321616-AH-AS-V
1421616-AH-AS-V
3” to 2” x 16” x 16” (HR Only)
4” to 2” x 16” x 16” (HR Only)
3” to 2” (1” Visco Layered) x 16” x 16” (Sits like 2” to 1”)
1321816-AH-AS
1421816-AH-AS
1321816-AH-AS-V
1421816-AH-AS-V
3” to 2” x 18” x 16” (HR Only)
4” to 2” x 18” x 16” (HR Only)
Page 13
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Ischial-Step Wedges
Measurement Instructions for Customized Ischial-Steps
To customize, please copy page; fill in the blanks & fax to JDM.
Example 1421816-AH-AS-I
(4” to 2” x 18” Wide x 16 “ Deep
Anti-Hammocking Cushion
With Ischial Step and Anti-Skid Bottom)
The Anti-Hammocking Ischial-Step Wedge is
designed to inhibit sliding by utilizing your resident’s
“natural curvature.” The Ischial Step utilizes this
natural curvature to give an anchored support to the
posterior tilt. In order to properly utilize this anchor,
the step should be located at the resident’s gluteal
fold. Please refer to the diagram on the right for
proper measuring instructions. Because the posterior tilt increases the pressure on the Ischials, the
back half of all JDM’s Ischial Steps have one-inch
layer or more of Visco. The anti-hammocking bottom allows residents to sit lower in the wheelchair
than they would in a solid-insert type of cushion. All
Anti-Hammocking Ischial-Step Cushions come with
an Anti-Skid bottom and Velcro straps to prevent the
cushion from sliding in the wheelchair.
As the diagram on the right
reflects, your residents have a
“natural curvature” to their bodies. This curvature
creates an “anchor of support.”
In order to properly utilize this
“anchor,” the step should be
located at the resident’s Gluteal Fold. Please refer to the
diagram below, or call JDM for
proper measuring instructions.
A.
B.
C.
D.
E.
__________”
__________”
__________”
__________”
__________”
Proper “step” placement
is at the gluteal fold.
thickness at “front edge” of cushion
thickness at “back edge” of cushion
width of cushion
depth of cushion
distance to gluteal fold from back edge of
wheelchair seat (See diagram above.)
Code#
Description (Thickness x Width x Depth)
1321616-AH-AS-I
1421616-AH-AS-I
1521616-AH-AS-I
1321616-AH-AS-I-V
1421616-AH-AS-I-V
3” to 2” x 16” x 16” (HR, with Visco at IT’s only)
1321816-AH-AS-I
1421816-AH-AS-I
1521816-AH-AS-I
1321816-AH-AS-I-V
1421816-AH-AS-I-V
Price
NOTE: The back half of JDM’s Ischial Steps ALL have a one-inch layer of Visco. Prices are subject to change without notice.
Page 14
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Coccyx-Cutout Cushions
Measurement Instructions for Customized Cutouts:
Copy and draw desired “Cut-Out in appropriate area on diagram
below. Fill in the blanks below and fax to JDM. Please call if
assistance is needed.
(minimum of “B” is 3 inches)
Diagram To Left:
Copy and draw “Cut
Out” in appropriate area.
Example 1321816-AH-AS-CV
(3” to 2” Thick x 18” Wide x 16” Deep Anti-Hammocking
Cushion with Coccyx Cutout, Anti-Skid Bottom & Visco)
The Coccyx Cutout Option for a cushion or
wedge is designed for those residents with existing difficulties at the coccyx area, such as decubitus
ulcers. As the name implies, the coccyx portion
of the cushion is “cut out.” The entire cushion or
wedge is layered with Visco to redistribute pressure over the total surface area; but, in particular,
the Visco foam molds to the shape of the body
surrounding the cutout. The idea is to eliminate
any pressure exerted on the wound and to redistribute the pressure surrounding the wound, promoting
faster healing. The low-profile, anti-hammocking
bottom allows most residents to continue to selfpropel. These cushions come with Anti-Skid bottoms
and Velcro straps to prevent them from sliding in the
wheelchair. For customized Cutouts, please refer to
the adjacent diagram. Fill in measurements and draw
desired cutouts at the appropriate area.
Diagram To Left:
Standard Coccyx
Cutout Cushion
(5” Wide & 5” Deep)
Code#
For 16” Wide x 16” Deep Wheelchair
Description
021616-AH-AS-CV
031616-AH-AS-CV
041616-AH-AS-CV
1321616-AH-AS-CV
1421616-AH-AS-CV
2” x 16” x 16”
3” x 16” x 16”
4” x 16” x 16”
3” to 2” x 16” x 16”
4” to 2” x 16” x 16”
021816-AH-AS-CV
031816-AH-AS-CV
041816-AH-AS-CV
1321816-AH-AS-CV
1421816-AH-AS-CV
2” x 18” x 16”
3” x 18” x 16”
4” x 18” x 16”
3” to 2” x 18” x 16”
4” to 2” x 18” x 16”
Price
NOTE: All of these anti-hammocking cushions come with an anti-skid bottom, a coccyx cutout and a one-inch layer of Visco.
Page 15
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Cushions with Coccyx Scoop & Medial Thigh Separator
AH Coccyx Scoop with Medial Separator
In order to customize the cushion’s height, width, or depth
from our stock items, please copy page; fill in the blanks
and fax to JDM.
A. __________” thickness at front of cushion where the
legs will lie
B. __________” thickness at the back, center of cushion
Example 1321816-AH-AS-CS-M-V
(3” to 2” Thick x 18” Wide x 16” Deep
Anti-Hammocking Cushion with Coccyx Scoop, Medial
Thigh Separator, Anti-Skid Bottom & Visco)
These Anti-Hammocking Coccyx Scoop
Cushions have contoured two-leg channeled
medial thigh separators, an anti-hammocking
bottom, and a Visco-laminating design, thereby
promoting proper leg alignment, providing slight
abduction, redistributing pressure and weight
evenly, while placing the resident in a low-profile
pelvic tilt.
These cushions come with Anti-Skid bottoms
and Velcro straps to prevent them from sliding in
the wheelchair.
To the Right:
Front Side of Coccyx
Scoop for a better View
of Measurement “A”
Code#
Description
1321616-AH-AS-CS-M-V
3” to 2” x 16” x 16”
4” to 2” x 16” x 16”
3” to 2” x 18” x 16”
4” to 2” x 18” x 16”
3” to 2” x 18” x 18”
4” to 2” x 18” x 18”
Price
NOTE: All of these anti-hammocking cushions come with an anti-skid bottom, a coccyx scoop, a medial thigh
separator and a one-inch layer of Visco. Due to Visco Layering all Coccyx Scoop Cushions sit lower when
compressed.
Page 16
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Ischial Coccyx Scoop with Medial
Thigh Separators and Visco (G.I.V.E)
The Anti-Hammocking Ischial Coccyx Scoop has the
following features.
• A convex-shaped bottom of HR (High Resiliency)
Polyurethane to eliminate sling seat sag and provide a
stable base of support.
• Anti-skid bottom.
• Contoured two-leg channeled medial thigh separators
to promote proper leg alignment.
• Coccyx-Scoops assist in redistributing and off loading sacral and coccyx pressures.
Example 1421816-AH-AS-CS-I-M-V
Anti-Hammocking Cushion with Ischial-Step, Coccyx
Scoop, Medial Thigh Separator, Anti-Skid Bottom & Visco)
• A ‘Pre-Ischial” step that utilizes the body’s natural
curvature to inhibit sliding and thrusting.
• A top layer of G.I.V.E (Gel Infused Visco Elastic Foam)
to redistribute pressure, body mold, absorb shock, and provide overall comfort.
Code#
Description
Anti-Hammocking Ischial Coccyx Scoop with Medial Thigh Separator for Weights up to 175 lbs
1321616-AH-AS-CS-I-M-V
3” to 2”x 16”x16”
3” to 2”x 18”x16”
3” to 2”x 18”x18”
4” to 2”x 16”x16”
4” to 2”x 18”x16”
4” to 2”x 18”x18”
Anti-Hammocking Ischial Coccyx Scoop with Medial Thigh Separator for Weights up to 300 lbs
4” to 3”x 16”x16”
4” to 3”x 18”x16”
4” to 3”x 18”x18”
Page 17
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Flexible Pelvic-Obliquity Wedges
(Back)
(Right)
(Left)
(Front)
Example 1431816-AH-AS-POL-V
Flexible Pelvic-Obliquity Wedge
4”-3” x 18” x 16” Wedge
to Elevate Left Hip
The Pelvic-Obliquity Cushion is used for a flexible
obliquity and is designed to build up the low side of
the pelvis. The picture on the left is an example of a
Pelvic Obliquity Cushion designed for a patient with
a left flexible pelvic obliquity.
To address the pressures associated with this
positioning correction, JDM’s Pelvic Obliquity
Cushions are layered with Visco elastic pressureredistributing polyurethane.
To measure for correction of a flexible pelvic
obliquity, seat the patient on a PT mat. With an
assistant’s aid, place a yardstick level across the
patient’s PSIS. At each end of the yardstick, measure
the distance from the yardstick to the mat and advise
JDM Medical. (Example Left = 3” Right =2”).
If the patient has a fixed obliquity (often caused
by muscle or joint contractures), you will need to
select a cushion that builds up the high side of the
pelvis. This will allow for a more stable base of
support. JDM recommends you use an AntiHammocking Fixed Obliquity cushion. (See next
page.)
Code #
1431616-AH-AS-POL-V
1431616-AH-AS-POR-V
1531616-AH-AS-POL-V
1531616-AH-AS-POR-V
1431816-AH-AS-POL-V
1431816-AH-AS-POR-V
1531816-AH-AS-POL-V
1531816-AH-AS-POR-V
Description
(Thickness x Width X Depth)
Price
Flexible Pelvic-Obliquity Wedge 4” to 3” x 16” x 16” (To Raise Left Hip)
Flexible Pelvic-Obliquity Wedge 4” to 3” x 16” x 16” (To Raise Right Hip)
For Special Dimensions, please call JDM for assistance and price quote. Prices are subject to change without notice.
Page 18
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Fixed Pelvic-Obliquity Wedges
Fixed
Pelvic-Obliquity
Wedge
Fixed Pelvic-Obliquity Wedges are designed
for those residents with a “fixed” pelvic obliquity. Fixed tilt/obliquity patients should have
a cushion that accommodates the individual’s
tilt without trying to correct the imbalance. If a
patient’s pelvic obliquity is fixed, you build up
under the high side. In the picture to the left, the
patient’s fixed obliquity is on the patient’s right
side. Building up the high side allows the pelvis
to be fully supported. All Pelvic Obliquity Cushions are layered with Visco for proper pressure
redistribution.
Fixed Pelvic-Obliquity Wedges can be right or
left quadrant fixed. Fixed Pelvic-Obliquity
Wedges are always “Resident Specific.”The
therapist will need to contact JDM for measuring, coding and pricing instructions.
Code #
Fixed Pelvic-Obliquity Wedge
All Fixed-Pelvic Obliquity Wedges are custom made. Please
call JDM for measuring, pricing and coding instructions.
Page 19
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Anti-Hammocking Bariatric Cushions & Wedges
Example 1432418-AH-AS-CS-M-V
4” to 3” x 24” Wide x 18” Deep
Bariatric Cushions and Wedges are designed for the larger patients. These cushions
and wedges have a minimum of one inch of
Visco to redistribute the increased pressures.
Wheelchair sizes of 22-inches wide and
greater additionally have a thin layer of Gel.
Bariatric Cushions are available in the
same types of cushions and wedges normally manufactured by JDM Medical. For
example: you may order Bariatrics as Flat
Cushions, Wedges, Ischial Steps, Coccyx
Scoops or Coccyx Cutouts. For availability
of features, such as Flip-Down Abductors,
Wings, etc., please refer to the respective
pages of cushion types listed above. Please
call JDM for assistance and pricing for any
Bariatric Cushion not listed below. We are
always happy to serve you.
Code#
Description
Price
Anti-Hammocking Bariatric Cushions with Anti-Skid Bottom & One-Inch Layer of Visco
1432018-AH-AS-I-V
4” to 3”x 20” x 18”
1432218-AH-AS-I-V
4” to 3”x 22” x 18” (1/2” Gel Added)
1432418-AH-AS-I-V
4” to 3”x 24” x 18” (1/2” Gel Added)
1532618-AH-AS-I-V
5” to 3”x 26” x 18” (1/2” Gel Added)
1532820-AH-AS-I-V
5” to 3”x 28” x 20” (1/2” Gel Added)
1543020-AH-AS-I-V
5” to 4”x 30” x 20” (1/2” Gel Added)
Anti-Hammocking Coccyx Scoop/Medial Thigh Separator/Anti-Skid Bottom/1-Inch Layer of Visco
4” to 3”x 20” x 18”
4” to 3”x 22” x 18” (1/2” Gel Added)
4” to 3”x 24” x 18” (1/2” Gel Added)
5” to 3”x 26” x 18” (1/2” Gel Added)
5” to 3”x 28” x 20” (1/2” Gel Added)
5” to 4”x 30” x 20” (1/2” Gel Added)
Page 20
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
GEL-FOAM CUSHIONS
The Gel-Foam concept is a combination of four (4) substrates:
1.
A convex-shaped bottom of high-resiliency (HR) polyurethane to
eliminate the hammocking sling-seat sag, while providing a stable base
of support.
2.
A middle layer of Quadragel to help reduce shear forces, to
assist in redistributing pressure and to inhibit heat buildup.
3.
A layer of “Gel-Infused Visco Elastic” (G.I.V.E.) with “Micro-Gel” beads This
layer provides shock absorption, body molding, pressure redistribution
and comfort. (Note: G.I.V.E. comes on the heavier weight-bearing
cushions; i.e., those cushions with item code “-V.”)
4.
A thin top layer of HR Foam.
Any of JDM’s Gel-Foam Cushions are excellent devices for long-term care
providing comfort, pressure redistribution and durability at good prices.
Page 21
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Gel-Foam Flat Cushions have anti-hammocking; anti-skid bottoms to eliminate the “slingseat sag,” while providing a stable base of support. Due to their “low profile,” these cushions
are excellent for those individuals who are able
to propel their wheelchair by foot movement.
These cushions have:
• A convex-shaped bottom of high-resiliency
(HR) polyurethane to eliminate sling-seat sag.
Displayed Above: Item # 021816-AH-AS-G-V
• A middle layer of Quadragel to help reduce
shear forces, to assist in redistributing pressure and to inhibit heat buildup.
• A layer of “Gel-Infused Visco Elastic” (G.I.V.E.)
with“Micro-Gel” beads This layer provides
shock absorption, body molding, pressure redistribution and comfort. (Note: G.I.V.E. comes
on the heavier weight-bearing cushions; i.e.,
those cushions with item code (“-V.”)
• A thin top layer of HR Foam.
• An anti-skid bottom.
Code#
Item Description
Price
For Weights Up To 150 lbs. Without Visco:
021616-AH-AS-G --------------------2”x16”x16” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------021816-AH-AS-G --------------------2”x18”x16” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------021818-AH-AS-G --------------------2”x18”x18” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------For Weights Up To 250 lbs. Without Visco:
031616-AH-AS-G --------------------3”x16”x16” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------031816-AH-AS-G --------------------3”x18”x16” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------031818-AH-AS-G --------------------3”x18”x18” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------032016-AH-AS-G --------------------3”x20”x16” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------032018-AH-AS-G --------------------3”x20”x18” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------032020-AH-AS-G --------------------3”x20”x20” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------032216-AH-AS-G --------------------3”x22”x16” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------032218-AH-AS-G --------------------3”x22”x18” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------032220-AH-AS-G --------------------3”x22”x20” Flat Cushion: Anti-Hamm, Anti-Skid & Gel Inserts-------------------------For Weights Up To 175 lbs with One Inch of Visco (G.I.V.E.) (Actual thickness is 2½“ but will compress to 2” or less):
021616-AH-AS-G-V -----------------2”x16”x16” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------021618-AH-AS-G-V -----------------2”x16”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------021816-AH-AS-G-V -----------------2”x18”x16” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------021818-AH-AS-G-V -----------------2”x18”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------022016-AH-AS-G-V -----------------2”x20”x16” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------022018-AH-AS-G-V -----------------2”x20”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------022020-AH-AS-G-V -----------------2”x20”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco--------------
Page 22
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Code#
Item Description
Price
Gel-Foam Flat Cushions (Continued)
For Weights Up To 300 lbs with One Inch of Visco (G.I.V.E.) (Actual thickness is 3½“ but will compress to 2½” or less):
031816-AH-AS-G-V -----------------3”x18”x16” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------031818-AH-AS-G-V -----------------3”x18”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------032018-AH-AS-G-V -----------------3”x20”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------032020-AH-AS-G-V -----------------3”x20”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------032218-AH-AS-G-V -----------------3”x22”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------032220-AH-AS-G-V -----------------3”x22”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------032418-AH-AS-G-V -----------------3”x24”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------032420-AH-AS-G-V -----------------3”x24”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------For Weights Up To 450 lbs with One Inch of Visco (G.I.V.E.) (Actual thickness is 4½“ but will compress to 3½” or less):
042218-AH-AS-G-V -----------------4”x22”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------042220-AH-AS-G-V -----------------4”x22”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------042418-AH-AS-G-V -----------------4”x24”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------042420-AH-AS-G-V -----------------4”x24”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------042618-AH-AS-G-V -----------------4”x26”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------042620-AH-AS-G-V -----------------4”x26”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------042818-AH-AS-G-V -----------------4”x28”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------042820-AH-AS-G-V -----------------4”x28”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------043020-AH-AS-G-V -----------------4”x30”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------For Weights Up To 475 lbs with Two Inches of Visco (G.I.V.E.) (Actual thickness is 4½“ but will compress to 3½” or less):
042218-AH-AS-G-V2 ---------------4”x22”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------042220-AH-AS-G-V2 ---------------4”x22”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------042418-AH-AS-G-V2 ---------------4”x24”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------042420-AH-AS-G-V2 ---------------4”x24”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------042618-AH-AS-G-V2 ---------------4”x26”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------042620-AH-AS-G-V2 ---------------4”x26”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------042818-AH-AS-G-V2 ---------------4”x28”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------042820-AH-AS-G-V2 ---------------4”x28”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------043020-AH-AS-G-V2 ---------------4”x30”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------For Weights Up To 500 lbs with One Inch of Visco (G.I.V.E.) (Actual thickness is 5½“ but will compress to 4½” or less):
052418-AH-AS-G-V -----------------5”x24”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------052420-AH-AS-G-V -----------------5”x24”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------052620-AH-AS-G-V -----------------5”x26”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------052818-AH-AS-G-V -----------------5”x28”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------052820-AH-AS-G-V -----------------5”x28”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------053020-AH-AS-G-V -----------------5”x30”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 1” Visco-------------For Weights Up To 600 lbs with Two Inches of Visco (G.I.V.E.) (Actual thickness is 6½“ but will compress to 3½” or less):
052418-AH-AS-G-V2 ---------------5”x24”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------052420-AH-AS-G-V2 ---------------5”x24”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------052620-AH-AS-G-V2 ---------------5”x26”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------052818-AH-AS-G-V2 ---------------5”x28”x18” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------052820-AH-AS-G-V2 ---------------5”x28”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------053020-AH-AS-G-V2 ---------------5”x30”x20” Flat Cushion: Anti-Hamm, Anti-Skid, Gel Inserts & 2” Visco-------------Prices are subject to change without notice.
Page 23
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Gel-Foam Wedges
Gel-Foam Wedges have anti-hammocking;
anti-skid bottoms to eliminate the “sling-seat
sag,” while providing a stable base of support.
The wedge shape inhibits forward leaning and
sacral sitting. These cushions have:
Displayed Above: Item # 132816-AH-AS-G-V
(HR) polyurethane to eliminate the effect of a
“sling-bottom” wheelchair, while providing a
stable base of support.
shear forces, to assist in redistributing pressure and to inhibit heat buildup.
• A layer of “Gel-Infused Visco Elastic”
(G.I.V.E.) with “Micro-Gel” beads. This layer
provides shock absorption, body molding,
pressure redistribution and comfort. (Note:
G.I.V.E. comes on the heavier weight-bearing
cushions; i.e., those cushions with item code “-V.”)
Measurements Instructions:
A. __________” thickness at “front edge” of
cushion
B. __________” thickness at “back edge” of
cushion
Page 24
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Code#
Item Description
Price
Gel-Foam Wedges
For Weights Up To 150 lbs. Without Visco:
1321616-AH-AS-G -----------------3” to 2”x16”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts---------------------------1321816-AH-AS-G -----------------3” to 2”x18”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts---------------------------1421616-AH-AS-G -----------------4” to 2”x16”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1421818-AH-AS-G -----------------4” to 2”x18”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts---------------------------For Weights Up To 250 lbs. Without Visco:
1431616-AH-AS-G -----------------4” to 3”x16”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1431816-AH-AS-G -----------------4” to 3”x18”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1431818-AH-AS-G -----------------4” to 3”x18”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1432016-AH-AS-G -----------------4” to 3”x20”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1432018-AH-AS-G -----------------4” to 3”x20”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1432020-AH-AS-G -----------------4” to 3”x20”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1432216-AH-AS-G -----------------4” to 3”x22”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1432218-AH-AS-G -----------------4” to 3”x22”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------1432220-AH-AS-G -----------------4” to 3”x22”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts --------------------------For Weights Up To 175 lbs with One Inch of Visco (G.I.V.E.) (Actual thickness is 3½ to 2½“; will compress to 2½- to 1½“ or less):
1321616-AH-AS-G-V --------------3” to 2”x16”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco -----------1321816-AH-AS-G-V --------------3” to 2”x18”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco -----------1321818-AH-AS-G-V --------------3” to 2”x18”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1322016-AH-AS-G-V --------------3” to 2”x20”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1322018-AH-AS-G-V --------------3” to 2”x20”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1322020-AH-AS-G-V --------------3” to 2”x20”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1421616-AH-AS-G-V --------------4” to 2”x16”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1421816-AH-AS-G-V --------------4” to 2”x18”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1421818-AH-AS-G-V --------------4” to 2”x18”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1422018-AH-AS-G-V --------------4” to 2”x20”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1422020-AH-AS-G-V --------------4” to 2”x20”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------For Weights Up To 300 lbs with One Inch of Visco (G.I.V.E.) (Actual thickness is 4½ to 3½“; will compress to 3½- to 2½“ or less):
1431816-AH-AS-G-V --------------4” to 3”x18”x16” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco -----------1431818-AH-AS-G-V --------------4” to 3”x18”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432018-AH-AS-G-V --------------4” to 3”x20X18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432020-AH-AS-G-V --------------4” to 3”x20”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432218-AH-AS-G-V --------------4” to 3”x22”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432220-AH-AS-G-V --------------4” to 3”x20”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432418-AH-AS-G-V --------------4” to 3”x24”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432420-AH-AS-G-V --------------4” to 3”x24”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432618-AH-AS-G-V --------------4” to 3”x26”x18” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------1432620-AH-AS-G-V --------------4” to 3”x26”x20” Wedge: Anti-Hamm, Anti-Skid & Gel Inserts & 1” Visco------------For larger weights please call JDM customer service for recommendations and pricing.
Page 25
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Gel-Foam Ischial-Step Wedges
Gel-Foam Ischial Step Wedges have antihammocking; anti-skid bottoms to eliminate the
“sling-seat sag,” while providing a stable base of
support. The wedge shape inhibits forward leaning
and sacral sitting. These cushions have:
Displayed Above: Item # 132816-AH-AS-G-I-V
• A convex-shaped bottom of high-resiliency (HR)
polyurethane to eliminate the effect of a “slingbottom” wheelchair, while providing a stable base
of support.
• A middle layer of Quadragel to help reduce shear
forces, to assist in redistributing pressure and to
inhibit heat buildup.
• A layer of “Gel-Infused Visco Elastic” (G.I.V.E.)
with “Micro-Gel” beads. This layer provides shock
absorption, body molding, pressure redistribution
and comfort. (Note: G.I.V.E. comes on the heavier weight-bearing cushions; i.e., those cushions with item code “-V.”)
Item Description
Code#
For Weight Up To 175 lbs Without Visco:
1321616-AH-AS-G-I
1321816-AH-AS-G-I
1321818-AH-AS-G-I
1322018-AH-AS-G-I
3” to 2”x16”x16” Ischial Step: Anti-Hamm, Anti-Skid & Gel
For Weight Up To 300 lbs With 1” Visco:
1431816-AH-AS-G-I-V
1431818-AH-AS-G-I-V
1432018-AH-AS-G-I-V
1432218-AH-AS-G-I-V
1432220-AH-AS-G-I-V
1432420-AH-AS-G-I-V
1432618-AH-AS-G-I-V
1432620-AH-AS-G-I-V
1432818-AH-AS-G-I-V
1432820-AH-AS-G-I-V
4” to 3”x18”x16” Ischial Step: Anti-Hamm, Anti-Skid, Gel &Visco
For Customized Ischial-Steps see instructions below and call JDM for a price quote.
Page 26
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Measurement Instructions for Customized Ischial Steps
As the diagram on the left, below illustrates, your residents have a “natural curvature” to their bodies. This curvature creates an “anchor of support.” In order
to properly utilize this “anchor,” the step should be located at the resident’s Gluteal Fold. Please refer to the diagram to the left, or call JDM for proper measuring instructions.
E. __________” distance to gluteal fold from front
edge of wheelchair seat. (See
diagram below.)
Proper “step”
placement is at
the gluteal fold.
Page 27
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Thigh Adductor
Gel-Foam Coccyx-Scoop Cushions
Displayed Above: Item # 143816-AH-AS-CS-G-M-V
Gel-Foam Coccyx-Scoop cushions and wedges have anti-hammocking, anti-skid bottoms to
eliminate the “sling-seat sag” and to provide a
stable base of support. They have contoured
two-leg channeled medial thigh separators to
promote proper leg alignment and reduce hip
rotation. Coccyx scoops assist in redistributing
and off-loading sacral and coccyx pressure.
These cushions have:
(HR) polyurethane to eliminate sling-seat sag.
shear forces, to assist in redistributing pressure
and to inhibit heat buildup.
• A layer of “Gel-Infused Visco Elastic”
(G.I.V.E.) with “Micro-Gel” beads. This layer
provides shock absorption, body molding, pressure redistribution and comfort.
Code#
Item Description
Price
Gel-Foam Coccyx-Scoop Cushions
For Weights Up To 175 lbs with 1 Inch of Visco (G.I.V.E.) (Actual thickness is 3½ to 2½“; will compress to 2½- to 1½“ or less):
1321616-AH-AS-CS-G-M-V
3” to 2”x16”x16”Coccyx Scoop Wedge: Anti-Hamm, Anti-Skid, Gel &Visco
Page 28
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Code#
Item Description
Price
Gel-Foam Coccyx-Scoop Cushions (Continued)
For Weights Up To 300 lbs with One Inch of Visco (G.I.V.E.):
3”x18”x16”Coccyx Scoop Flat Cushion: Anti-Hamm, Anti-Skid, Gel &Visco
For Weights Up To 450 lbs with 1 Inch of Visco (G.I.V.E.) (Actual thickness is 4½” but will compress to 3½-” or less):
Page 29
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Gel-Foam Coccyx-Scoop Ischial-Step Wedges
Gel-Foam Coccyx Scoops with Ischial-Step Wedges
have anti-hammocking, anti-skid bottoms to eliminate
the “sling-seat sag” and to provide a stable base of support. They have contoured two-leg channeled medial
thigh separators to promote proper leg alignment and
reduce hip rotation. Coccyx scoops assist in redistributing and off-loading sacral and coccyx pressure, while the
“Pre-Ischial” Step utilizes the body’s natural curvature to
inhibit sliding and thrusting. These cushions have:
• A convex-shaped bottom of high-resiliency (HR) polyurethane to eliminate sling-seat sag.
• A middle layer of Quadragel to help reduce shear
forces, to assist in redistributing pressure and to inhibit
heat buildup.
Displayed Above:
Item # 142816-AH-AS-CS-G-I-M-V
• A layer of “Gel-Infused Visco Elastic” (G.I.V.E.) with
“Micro-Gel” beads This layer provides shock absorption,
body molding, pressure redistribution and comfort.
Page 30
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Code#
Item Description
Price
Gel-Foam Coccyx-Scoop Ischial-Step Wedges
1321616-AH-AS-CS-G I-M-V
3” to 2”x16”x16” Coccyx-Scoop Ischial: Anti-Hamm, Anti-Skid, Gel &Visco
1321816-AH-AS-CS-G-I-M-V
4” to 3”x18”x16”Coccyx-Scoop Ischial: Anti-Hamm, Anti-Skid, Gel &Visco
Page 31
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
NOTES: _____________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Page 32
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
SOLID-INSERT CUSHIONS AND WEDGES
Considerations when utilizing a Solid-Insert Cushion or
Wedge:
1. The Solid-Insert in these cushions eliminate the “hammocking effect” of
a sling-bottom wheelchair by elevating the individual above the upholstery
tubing.
2. All of JDM’s Solid Inserts must have a minimum of three inches of
our High Resiliency Polyurethane (HR) as a cushioning damper between
the insert and the patient, or the cushions/wedge may have a combination of at least two inches of HR along with an additional inch of “G.I.V.E.”
(Gel-Infused Visco Elastic) for pressure redistribution. In other words, all
standard solid inserts must be a minimum of three-inches thick. Please note:
due to G.I.V.E.’s compression capabilities, the additional one inch added to the
cushion or wedges’s height is minimized. Example: 3” x 18” 16” with Visco
(031816-AS-V) will sit like a 2” thick cushion with a solid insert.
3. All of JDM’s Solid-Insert Cushions have Velcro strapping to attach under
the vinyl seat to prevent the cushion from twisting and sliding.
4. All of JDM’s Solid-Insert Cushions have a rubberized anti-skid bottom to
further prevent the cushion from sliding, as well as to prevent the wheelchair’s
upholstery tubing from “rubbing” into the fabric.
5. By utilizing JDM’s feature code system, the cushion or wedge may be
modified to accommodate many of the problems found in long-term care.
Page 33
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Flat Cushions
Measurement Instructions for Customized Cushions
In order to customize a cushion’s height, width, or depth
and fax to JDM.
A. __________” thickness of cushion
(minimum for “A” is 3 inches)
B. __________” width of cushion
Example 031816-AS
C. __________” depth of cushion
(3” Thick x 18” Wide x 16” Deep
with Solid Insert & Anit-Skid Bottom)
(Front)
Flat Cushions are for individuals who do not have
a potential for sliding and who do not have a history
C
B
of sliding.
JDM manufactures cushions for any size wheel-
A
chair. For special dimensions, please refer to the ad(Back)
jacent diagram and call JDM for pricing or assistance.
For weight-bearing purposes, JDM’s Solid-Insert
Cushions have a minimum thickness of 3 inches of
Note: in order to extend a cushion’s
depth beyond the front wheelchair posts,
JDM notches the solid insert to fit properly.
HR polyurethane foam, or a combination of 2 inches
HR and one inch of G.I.V.E.
Code #
Description
Price
031616-AS
031616-AS-V
041616-AS
041616-AS-V
3”x16”x16” with Anti-Skid Bottom
3”x16”x16” with Anti-Skid & Visco
62.00
86.50
81.00
105.50
Code #
031816-AS
031816-AS-V
041816-AS
041816-AS-V
Page 34
Description
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Wedges
Measurement Instructions for Customized Wedges
In order to customize a cushion’s height, width, or depth
and fax to JDM.
(minimum for “B” is 3 inches)
Example 1431816-AS-V
with a Solid Insert, Anti-Skid Bottom and Visco)
(Front)
D
C
The Wedged Shape of this cushion helps to inhibit
sliding and sacral sitting by placing the patient into
A
a posterior tilt. Because the posterior tilt moves the
weight-bearing pressures to the ischials, JDM’s solid-
(Back)
insert wedges will have a minimum of two inches of
HR (High Resiliency) Polyurethane foam along with
B
one inch of Visco. JDM manufactures wedges for any
size wheelchair. For special dimensions, please refer
Note: In order to extend a wedge’s
depth beyond the front wheelchair posts,
JDM notches the solid insert to fit properly.
to the adjacent diagram and call JDM for pricing or
assistance.
Code #
Description
Price
Code #
Description
1431616-AS-V 4-3”x16”x16” with Anti-Skid & Visco 105.50 1431816-AS-V 4-3”x18”x16” with Anti-Skid & Visco
1531616-AS-V 5-3”x16”x16” with Anti-Skid & Visco 124.50 1531816-AS-V 5-3”x18”x16” with Anti-Skid & Visco
Page 35
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Ischial-Step Wedges
As the diagram on the right
reflects, your residents have
a “natural curvature” to their
bodies. This curvature
creates an “anchor of support.” In order to properly
utilize this “anchor,” the step
should be located at the resident’s Gluteal Fold. Please
refer to the diagram below, or
call JDM for proper measuring instructions.
Example 1431816-AS-I
E
Proper “step”
placement is at
the gluteal fold.
Measurement Instructions for Customized Ischial-Steps
In order to customize a cushion’s height, width, or depth from
our stock items, please copy page; fill in the blanks and fax to
JDM.
with 1” Ischial Step with Anti-Skid Bottom)
(minimum of “A” is 4 inches)
Ischial-Step Cushions differ from “Anti-Thrust”
Cushions in the fact that the “Step” is correctly placed
directly in front of the I.T.’s. The Ischial Step utilizes
the natural curvature of the body to give an “anchored
support” and uses the posterior tilt of a wedge to
prevent sliding. This combination moves the weightbearing pressure to the I.T.’s. Because this pressure is being placed onto the solid-insert bottom, all
solid-bottom Ischial Steps will have a “minimum” of 2
inches of HR Polyurethane foam, as well as one inch
of Visco at the rear of the cushion to accommodate
this I.T. pressure. Due to Visco’s compression capabilities, the additional one inch of Visco adds very little
height when sat upon. Note: To layer entire cushion
with Visco, please use the feature code “V.”
E. __________” distance to gluteal fold from back edge
of wheelchair seat (See diagram above.)
Code #
1431616-AS-I
1531616-AS-I
Description
4” - 3” x 16” x 16”
5” - 3” x 16” x 16”
Price
Code #
93.50
112.50
1431816-AS-I
1531816-AS-I
Page 36
Description
4” - 3” x 18” x 16”
5” - 3” x 18” x 16”
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Coccyx Cutouts
Measurement Instructions for Customized Cutouts:
Copy and draw desired “Cut-Out in appropriate area on diagram
below. Fill in the blanks below and fax to JDM. Please call if
assistance is needed.
Diagram To Left:
Copy and draw “Cut
Out” in appropriate area.
(Back)
C
Example 1431816-AS-CV
Wedge with Cutout, Anti-Skid Bottom and Visco Layer
for Pressure Redistribution)
(Back)
B
C
The Coccyx Cutout Option for a cushion or
wedge is designed for those residents with existing
difficulties at the coccyx area, such as decubitus
ulcers. As the name implies, the coccyxBportion of
the cushion is “cut out.” The idea is to eliminate any
pressure exerted on the wound and to redistribute the
D
pressure surrounding the wound, promoting faster
healing. The entire cushion or wedge is layered
with Visco elastic polyurethane to redistribute
pressure over the entire surface area; but, in particular, the Visco foam moulds to the shape of the
body surrounding the cutout.
The “Cut-Out” may be positioned in different areas
on the cushion or wedge as shown in the example to
the right. This allows for pressure removal at the groin,
coccyx, ischials, etc. Please use the adjacent diagram
to draw desired cutouts at the appropriate area. If a
Cutout Cushion is required for a 3-inch to 2-inch
wedge, please refer to the anti-hammocking
section.
D
A
(Front)
Diagram To Left:
Standard Coccyx
Cutout Cushion
(5” Wide & 5” Deep)
NOTES:
**All of JDM’s Solid-Insert Cut-Out Cushions and Wedges are layered
with Visco Foam over a minimum of 2 inches of HR Foam on the back
portion for pressure redistribution.
**In order to extend a cushion’s depth beyond the front wheelchair
posts, JDM notches the solid insert to fit properly.
Code #
031616-AS-CV
041616-AS-CV
Description
3” x 16” x 16” w/coccyx cutout
1431616-AS-CV 4”-3”x 16” x 16” w/coccyx cutout
Price
Code #
Description
86.50
105.50
031816-AS-CV
041816-AS-CV
105.50
1431816-AS-CV 4”-3”x 18” x 16” w/coccyx cutout
Page 37
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Coccyx Scoops with a Medial Thigh Separator & Visco
Coccyx Scoop with Medial Thigh Separator:
In order to customize the cushion’s height, width, or depth
and fax to JDM.
A. __________” thickness at front of cushion where the
legs will lie (minimum of “A” is 4 inches)
B. __________” thickness at the back, center of cushion
Example 1431816-AS-CS-M-V
(Anti-Skid Wedge 4” to 3” x 18” Wide x 16” Deep
with Coccyx Scoop, Medial Thigh Separator & Visco
on a Solid-Insert Bottom)
This Coccyx Scoop comes with an anti-skid
bottom, a coccyx scoop, a contoured two-leg
channeled medial thigh separator and a one-inch
layer of Visco. The contoured leg channels added
to the wedge shape provide a slight abduction and
improved alignment of the lower extremities. The
coccyx scoop and Visco layering help redistribute
pressure on the Coccyx, the I.T.’s and the entire
seating area. The wedge shape helps to inhibit sliding. All coccyx scoop cushions are layered with
Visco elastic polyurethane to redistribute pressure at key pressure points. These cushions are
an excellent “preventative” device for those residents
with slight lower extremity adduction problems, and
with recently “healed” decubs.
If a 3-inch to 2-inch, or a 4-inch to 2-inch
coccyx scoop incline is required, please use
the anti-hammocking options.
To the Right:
Front Side of Coccyx
Scoop for a better View
of Measurement “A”
**All of JDM’s Solid-Insert Coccyx Scoops with Medial Thigh
Separators are layered with Visco Foam over a minimum
of 2 inches of HR Foam on the back portion for pressure
redistribution.
**In order to extend a cushion’s depth beyond the front
wheelchair posts, JDM notches the solid insert to fit properly.
Code #
Description
For 16” Wide Wheelchair (Thickness x Width X Depth)
1431616-AS-CS-M-V 4” - 3” x 16” x16” with Coccyx Scoop and Medial Thigh Separator
For 18” Wide Wheelchair (Thickness x Width X Depth)
1431816-AS-CS-M-V 4” - 3” x 18” x16” with Coccyx Scoop and Medial Thigh Separator
Page 38
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Solid Insert Ischial Coccyx Scoop with a Medial
Thigh Separator and Visco (G.I.V.E)
The Solid Insert Ischial Coccyx Scoop has the
following features:
• A solid-insert bottom to eliminate sling seat sag by
elevating the individual above the upholstery tubing.
• Anti-skid bottom
• Contoured leg channels with leg adduction and medial
thigh separation to promote proper leg alignment.
Example 1421816-SI-AS-CS-I-M-V
• A top layer of G.I.V.E (Gel Infused Visco Elastic Foam) to redistribute pressure, body mold, absorb shock, and provide overall comfort.
Code#
Description
Price
Solid Insert Ischial Coccyx Scoop with Medial Thigh Separator for Weights up to 300 lbs
1431616-SI-AS-CS-I-M-V
4” to 3”x 16”x16”
4” to 3”x 18”x16”
4” to 3”x 18”x18”
Note: Solid Insert Ischial Coccyx Scoops with Medial Thigh Separator and Visco
must have a minimum of 3” of width
Page 39
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Flexible Pelvic-Obliquity Cushions
This Pelvic-Obliquity Cushion is used for a flexible
obliquity and is designed to build up the low side of the
pelvis. The picture on the left is an example of a Pelvic
Obliquity Cushion designed for a patient with a left
flexible pelvic obliquity.
To address the pressures associated with this
positioning correction, JDM’s Pelvic Obliquity
Cushions are layered with Visco elastic pressureredistributing polyurethane.
Example 1431816-AS-POL-V
(Sideways 4”-3” x 18” x 16” Wedge
to Elevate Left Hip)
If the patient has a fixed obliquity (often caused by
muscle or joint contractures), you will need to select a
cushion that builds up the high side of the pelvis. This
will allow for a more stable base of support. JDM
recommends you use an Anti-Hammocking Fixed
Obliquity cushion.
Code #
Description
Price
1431616-AS-POL-V
1431616-AS-POR-V
1531616-AS-POL-V
1531616-AS-POR-V
Sideway’s Wedge 4” to 3” x 16” x 16” (To Raise Left Hip)
Sideway’s Wedge 4” to 3” x 16” x 16” (To Raise Right Hip)
1431816-AS-POL-V
1431816-AS-POR-V
1531816-AS-POL-V
1531816-AS-POR-V
For Special Dimensions, please call JDM for assistance and price quote.
Page 40
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Lateral Elevated Wings
Example 1431816-CS-M-WL-V
Example 1431816-CS-M-WB-V
4” to 3” 18” x 16” Coccyx Scoop & Medial
Thigh Separator with Lateral Elevated Wing
for Right Side
4” to 3” 18” x 16” Coccyx Scoop & Medial
Thigh Separator with Lateral Elevated Wings
for Both Sides
Elevated Wings placed laterally on any cushion or wedge helps to keep the hips in proper
alignment, to inhibit L.E. sweeping and to prevent the wheelchair from contacting the resident.
The Wings may be added to the left side, right side, or both sides of the cushion or wedge. An
added benefit of this feature is that the “Wings” are built in as a part of the cushion, preventing
their misplacement and insuring their utilization.
In order to add wings to a cushion or wedge manufactured by JDM, add the proper code below
to the product’s code.
Feature Code #
WL
WR
WB
Description
Price
Lateral Elevated Wing for Left Side of Cushion/Wedge
Lateral Elevated Wing for Right Side of Cushion/Wedge
Lateral Elevated Wing for Both Sides of Cushion/Wedge
Lateral Elevated Wings may be added to any Cushion or Wedge that JDM manufactures at the
time of its original manufacturing.
For Special Dimensions, please call JDM for assistance and price quote.
Page 41
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Amputee Cushions
Example 021816-AMR-AS-V
Example 031816-AML-AS-V
(Cushion 2” x 18”W x 16”D for Right-Leg Amputee)
(Cushion 3” x 18”W x 16”D for Left-Leg Amputee)
Amputee Cushions have an extended side to support above-knee or below-knee amputations. Amputee
Cushions come in two types: 1) Rigid Extension Cushions (see examples above) and 2) Flip-Down Cushions
(see next page). Amputee Cushions and Wedges come with a solid insert to eliminate hammocking and to
support the lower extremity. They are manufactured with a minimum of two inches of HR Polyurethane foam
and one inch of Visco Layering. Velcro straps are attached to prevent the cushion from sliding in the chair.
Each Amputee Cushion is resident specific.
To measure B.K.A. flexed amputee extensions: First have the patient seated all the way to the back of the
wheelchair. Then measure from the front edge of the wheelchair sling to approximately 1 1/2 inches behind the
knee.
To measure B.K.A. Extended and A.K.A.’s: First seat patient all the way in the back of the wheelchair.
Measure from the front edge of the wheelchair sling to the end of the amputation and add 1 inch. Please note
the maximum length for any solid extension from the front edge of the wheelchair sling is 15 inches. Please call
JDM Medical for any assistance.
Code #
For Left-Leg Amputees
Description
031616-AML-AS-V
041616-AML-AS-V
031816-AML-AS-V
041816-AML-AS-V
Ext.
3”x16”x16” Amp.-Left_____”
4”x16”x16” Amp.-Left_____”
3”x18”x16” Amp.-Left_____”
4”x18”x16” Amp.-Left_____”
Price
113.50
121.50
113.50
121.50
Code #
For Right-Leg Amputees
Description
031616-AMR-AS-V
041616-AMR-AS-V
031816-AMR-AS-V
041816-AMR-AS-V
Ext.
3”x16”x16” Amp.-Right_____”
4”x16”x16” Amp.-Right_____”
3”x18”x16” Amp.-Right_____”
4”x18”x16” Amp.-Right_____”
Each Amputee Cushion is resident specific. Please call JDM for help for measuring instructions.
Page 42
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid-Insert Amputee Flip-Down Cushions
Amputee Flip-Down Cushions
The advantages of Flip-Down Amputee
Cushions as opposed to Rigid Amputee
Cushions are:
1) The flip-down portion of the cushion releases to assist in transfer if needed.
2) These devices may be used for both
BKA’s and AKA’s.
Example 031816-AM-AS-F-V
(3” Thick x 18” Wide x 16” Deep
Amputee Flip-Down Cushion )
The maximum extension is 12 inches for
BKA’s or AKA’s.
Code #
Description
Price
Bilateral Amputee Flip-Down Cushion With Visco
031616-AM-AS-F-V
031816-AM-AS-F-V
041616-AM-AS-F-V
041816-AM-AS-F-V
3” (2” Foam & 1” Visco) x 16” x 16”
3” (2” Foam & 1” Visco) x 18” x 16” 4” (3” Foam & 1” Visco) x 16” x 16”
4” (3” Foam & 1” Visco) x 18” x 16” Please call JDM for help with measuring instructions. Each Amputee Cushion is resident specific.
Page 43
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Adjustable Amputee Support
Adjustable Amputee Supports attach to
Swing Away Leg Rest Posts. The cushioned
pad is manufactured with 2 inches of HR
foam and 1 inch of Visco to absorb impact,
redistribute pressure and conform to
amputated limb. The pad measures 3” x 8” x
10”. However, for larger chairs, the pad width
may be modified at no extra cost. The
maximum length is 12 inches.
Example 630-R
Adjustable Amputee Support for Right Leg
Code #
Description
630-L
Adjustable Amputee Support -Left
630-R
Adjustable Amputee Support - Right
Page 44
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
DROP SEATS AND DROP-SEAT CUSHIONS
Considerations when utilizing Drop Seats:
1. Drop Seats are a form of Solid Insert; therefore, any Drop Seat
Cushion or Wedge does not need any additional Solid Insert.
2. Drop Seats can be manufactured to fit almost any sized wheelchair. However, JDM may
require specific measurements.
3. Bariatric Drop Seats require additional underpinning, which JDM
provides.
4. Any cushion or wedge used with JDM’s Drop Seat has to account for and redistribute the
increased pressures created by the wheelchair crossbars. We strongly encourage using our
Drop-Seat Cushions and Wedges for this reason.
5. A Drop Seat will only lower a resident 1 1/2 inch to 2 1/2 inches, depending on the
wheelchair’s crossbar configuration.
6. Measurement instructions for customized Drop Seats are as follows:
A. __________ distance from back of chair to
crossbar on resident’s left side
B. __________ distance from back of chair to
crossbar on resident’s right side
Please copy page; fill in the blanks and call or fax
JDM the following measurements:
(If you need further instructions for measuring
drop seat, please call JDM for assistance.)
Page 45
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Drop Seats
Example 718
(Drop Seat for 18” x 16” Wheelchair )
Drop Seats are used to lower the height of the
resident’s seat so that the health care professional
can properly seat the resident without elevating
the feet beyond his or her functional capability.
This often allows the resident to continue to be
mobile. Because JDM’s Drop Seats are adjustable at all four corners, you may tilt the resident, if
so needed. This sometimes inhibits the hips from
sliding forward. This device is especially useful in
conjunction with a Kyphotic-Back Device for those
residents with a “C-shaping” forward.
JDM manufactures the Drop Seat utilizing a
composite material which is strong enough to
support the patient, but doesn’t add a lot of weight
to the wheelchair. The hooks are made with a
high-grade aluminum to prevent rusting and other
decomposition. The Drop Seat can be modified
to accommodate many different wheelchair sizes.
Flip-Down Abductors are available as an accessory. For custom Drop Seats, please refer to the
diagram and instructions on previous page (33).
Code #
716
718
720
Description
Price
Drop Seat for 16”W x 16”D Chair *
*Note: Cushions and Wedges for drop seats are sold separately.
Page 46
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Drop-Seat Cushions
The differences between cushions
which are designed for “Drop Seats” versus
“Sling-Bottom Seats” are:
1) Drop-Seat Cushions are designed to
sit upon the Drop Seat, so these
cushions have no need for a solidbottom insert.
2) Drop-Seat Cushions have a convex
bottom, angled sides and are Visco
layered to redistribute pressure at
the crossbars.
Example: 031816-AH-D-V
3” Drop Seat Cushion with Visco
(Displayed in Wheelchair)
Drop-Seat Cushions are manufactured
with a Velcro strip on the bottom to cling
to JDM’s Drop Seat for further stability. All
drop seat cushions are manufactured without the solid insert.
Code #
Description
Price
Drop Seat Cushions for 16” Wide x 16” Deep Wheelchairs
031616-AH-D-V
041616-AH-D-V
Drop Seat Cushions for 18” Wide x 16” Deep Wheelchairs
031816-AH-D-V
041816-AH-D-V
For Drop-Seat Cushions with Special Dimensions, fax measurements to JDM for quote, or
call for assistance. Drop Seats are sold separately.
Page 47
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Drop-Seat Wedges
The differences between wedges which
are designed for “Drop Seats” versus
“Sling-Bottom Seats” are:
1) Drop-Seat Wedges are designed to
sit upon the Drop Seat, so these
cushions have no need for a solidbottom insert.
2) Drop-Seat Wedges have a convex
bottom, angled sides and are Visco
layered to redistribute pressure at the
crossbars.
Example: 1431816-AH-D-V
4” to 3” Drop Seat Wedge with Visco
for 18” x 16” Wheelchair
Drop-Seat Wedges are manufactured
with a Velcro strip on the bottom to cling
to JDM’s Drop Seat for further stability. All
drop seat cushions are manufactured without the solid insert.
Code
Description
Price
Drop Seat Wedges for 16” Wide x 16” Deep Wheelchairs
1431616-AH-D-V
4” to 3” Drop Seat Cushion with Visco
Drop Seat Wedges for 18” Wide x 16” Deep Wheelchairs
1431816-AH-D-V
4” to 3” Drop Seat Cushion with Visco
For Drop-Seat Wedges with Special Dimensions, fax JDM for a quote, or call for assistance.
Drop Seats are sold separately.
Page 48
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Drop-Seat Ischial-Step Wedges
The differences between Ischial Steps which are
designed for “Drop Seats” versus “Sling-Bottom
Seats are:
1) Drop-Seat Ischial-Step Wedges are designed to sit upon the Drop Seat, so these
cushions have no need for a solid-bottom
insert.
Example: 1431816-AH-D-I-V
4”-3” Drop Seat Ischial Step Wedge
for an 18”W x 16”D Wheelchair
2) Drop-Seat Ischial-Step Wedges have a
convex bottom, angled sides and are Visco
layered to redistribute pressure at the
crossbars.
Note: In order to properly utilize this “anchor,” the
step should be located at the resident’s gluteal
fold. Please refer to the diagram on page 14, or
call JDM for proper measuring instructions.
Code#
Description
Price
Drop-Seat Ischial Steps for 16” Wide x 16” Deep Wheelchairs
1431616-AH-D-I-V
4”-3” Drop-Seat Ischial Step Wedge
1531616-AH-D-I-V
Drop-Seat Ischial Steps for 18” Wide x 16” Deep Wheelchairs
1431816-AH-D-I-V
1531816-AH-D-I-V
For Drop-Seat Ischial Steps with Special Dimensions, fax JDM for a quote, or call for assistance.
Drop Seats are sold separately.
Page 49
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Drop-Seat Coccyx Scoops
A Drop-Seat Coccyx Scoop has the same
coccyx scoop, contoured two-leg channeled medial
thigh separators and Visco as do all of JDM’s
Coccyx Scoop Cushions. The differences are:
Example: 1431816-AH-CS-D-M-V
4”-3” Drop-Seat Coccyx-Scoop Wedge
1) Drop-Seat Coccyx Scoops are
designed to sit upon the Drop Seat,
so these cushions have no need for a
solid-bottom insert.
2) Drop-Seat Coccyx Scoops have a
convex bottom, angled sides and are
Visco layered to redistribute pressure
at the crossbars.
Code#
Description
Price
Drop-Seat Coccyx Scoops for 16” Wide x 16” Deep Wheelchairs
1431616-AH-CS-D-M-V
4”- 3” Drop-Seat Coccyx Scoop
1431816-AH-CS-D-M-V
1431818-AH-CS-D-M-V
For Drop-Seat Coccyx Scoops with Special Dimensions, fax JDM for a quote, or call for
assistance. Drop Seats are sold separately.
Page 50
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Drop Seat Ischial Coccyx Scoop with Contoured
Medial Thigh Separators and Visco (G.I.V.E)
The Drop Seat Ischial Coccyx Scoop has the following features:
• A Drop Seat bottom made of HR (High Resiliency
Polyurethane) with Velcro attachments.
• Anti-skid bottom
• Contoured leg channels with leg adduction and medial
thigh separation to promote proper leg alignment.
Example 1421816-DS-AS-CS-I-M-V
• A top layer of G.I.V.E (Gel Infused Visco Elastic Foam) to redistribute pressure, body mold, absorb shock, and provide overall comfort.
Code#
Description
Drop Seat Ischial Coccyx Scoop with Medial Thigh Separator for Weights up to 175 lbs
1321616-DS-AS-CS-I-M-V
3” to 2”x 16”x16”
3” to 2”x 18”x16”
3” to 2”x 18”x18”
4” to 2”x 16”x16”
4” to 2”x 18”x16”
4” to 2”x 18”x18”
Drop Seat Ischial Coccyx Scoop with Medial Thigh Separator for Weights up to 300 lbs
4” to 3”x 16”x16”
4” to 3”x 18”x16”
4” to 3”x 18”x18”
Page 51
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Drop-Seat Coccyx Cutouts
As the name implies, the coccyx portion of the
cushion is “cut out.” The idea is to eliminate any
pressure exerted on the wound and to redistribute the pressure surrounding the wound, promoting faster healing. The entire cushion or wedge
is layered with Visco elastic polyurethane to
redistribute pressure over the entire surface
area; but, in particular, the Visco foam molds
to the shape of the body surrounding the
cutout.
1) Drop-Seat Coccyx Cutout Cushions are
designed to sit upon the Drop Seat, so these
cushions have no need for a solid-bottom
insert.
Example: 1431816-AH-CV-D
2) Drop-Seat Coccyx Cutout Cushions have a
convex bottom, angled sides and are Visco
layered to redistribute pressure at the crossbars.
For customized Cutouts, please refer to
the measuring instructions on page 16.
4”-3” Drop-Seat Coccyx Cutout
Code#
Description
Price
Drop-Seat Coccyx Cutouts for 16” Wide x 16” Deep Wheelchairs
031616-AH-CV-D
041616-AH-CV-D
1431616-AH-CV-D
Drop-Seat Coccyx Cutout Cushions for 18” Wide x 16” Deep Wheelchairs
031816-AH-CV-D
041816-AH-CV-D
1431816-AH-CV-D
For Drop-Seat Coccyx Cutout Cushions with Special Dimensions, fax JDM for a quote, or call for
Page 52
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Drop-Seat Wedge for Flexible Pelvic Obliquity
Example:1431816-AH-D-POL-V
Sideways 4”-3” Drop-Seat PelvicObliquity Wedge to Elevate Left Hip
The Pelvic-Obliquity Cushion is used for a flexible
obliquity and is designed to build up the low side of
the pelvis. The picture on the left is an example of a
Pelvic Obliquity Cushion designed for a patient with
a left flexible pelvic obliquity.
To address the pressures associated with
this positioning correction, JDM’s Pelvic Obliquity Cushions are layered with Visco elastic
pressure-redistributing polyurethane.
To measure for correction of a flexible pelvic
obliquity, seat the patient on a PT mat. With an
assistant’s aid, place a yardstick level across the
patient’s PSIS. At each end of the yardstick, measure the distance from the yardstick to the mat and
advise JDM Medical. (Example Left = 3” Right =2”).
If the patient has a fixed obliquity (often caused
by muscle or joint contractures), you will need to
select a cushion that builds up the high side of the
pelvis. This will allow for a more stable base of
support. JDM recommends you use a Fixed Obliquity cushion (see picture on page 30). Call JDM for
instructions.
Code#
Description
Price
1431616-AH-D-POL-V
1431616-AH-D-POR-V
1531616-AH-D-POL-V
1531616-AH-D-POR-V
1431816-AH-D-POL-V
1431816-AH-D-POR-V
1531816-AH-D-POL-V
1531816-AH-D-POR-V
Sideway’s Wedge 4” to 3” x 18” x 16” (To Raise Right Hip) Sideway’s Wedge 5” to 3” x 18” x 16” (To Raise Left Hip)
For Drop-Seat Pelvic-Obliquity Cushions with Special Dimensions, fax JDM for a quote, or call for
Page 53
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Bariatric Drop Seats
Bariatric Drop Seat Measuring Instructions for
Wheelchairs with Double Crossbars:
Note: All measurements for crossbars are to be taken
from the back of chair coming forward.
Distance to Second Crossbar ______
Distance to First Crossbar ________
Distance to Second Crossbar ______
Distance to First Crossbar ________
(Back of Chair)
B
Example: 72418
C
(PT’s Right)
(Drop Seat for a 24”W x 18”D Wheelchair)
(PT’s Left)
A
The Bariatric Drop-Seat can be made for wheelchairs 20 to 30 inches wide and either 18 or 20 inches
deep. This Drop Seat is double enforced underneath
to accommodate increased weight. Flip-Down Abductors may be added to Bariatric Drop Seats.
All Bariatric Drop Seats require measurements.
Please refer to the adjacent diagram. Copy, fill in
and fax to JDM for quote, or call for assistance.
D
(Front of Chair)
Wheelchair Dimensions (Please provide actual dimensions.
We will do the rest):
Width ______________
Depth _______________
Code#
72018
72218
72418
72618
72820
73020
Description
Price
Bariatric Drop Seat for 20” x 18” Chair
*Note: Cushions and Wedges for Bariatric Drop Seats are sold separately. (See page 42.)
Page 54
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Bariatric Drop-Seat Wedges & Cushions
Example: 1432418-AH-CS-D-M-V
4” to 3” Coccyx Scoop Wedge for Bariatric
Drop Seat on a 24”W x 18”D Wheelchair
Bariatric Cushions and Wedges are
designed for the larger patients. These cushions
and wedges have a minimum of one-inch top
layer of Visco. JDM adds a 1/2-inch Gel layer
to all sizes greater than 20 inches wide. If more
redistribution is needed due to the greater pressure associated with increased weight, you may
request additional Visco.
Bariatric Cushions are available in the
same types as other Drop Seat cushions and
wedges manufactured by JDM Medical. For
example: you may order Bariatrics as Flat
Cushions, Wedges, Ischial Steps, Coccyx
Scoops, Coccyx Cutouts, Winged Cushions or
Pelvic Obliquity Wedges. Please call JDM for assistance and pricing for any Bariatric Cushion not
listed below.
Code#
Description
Price
Bariatric Drop-Seat Ischial Step Wedges
1432018-AH-D-I-V
4” to 3” x 20” x 18”
1432218-AH-D-I-V
4” to 3” x 22” x 18” (1/2” Gel Added)
1432418-AH-D-I-V
4” to 3” x 24” x 18” (1/2” Gel Added)
1532618-AH-D-I-V
5” to 3” x 26” x 18” (1/2” Gel Added)
1532820-AH-D-I-V
5” to 3” x 28” x 20” (1/2” Gel Added)
1543020-AH-D-I-V
5” to 4” x 30” x 20” (1/2” Gel Added)
Bariatric Drop-Seat Coccyx Scoop/Medial Thigh Separator/Anti-Skid Bottom/Layer of Visco
1432018-AH-CS-D-M-V
4” to 3 ”x 20” x 18”
1432218-AH-CS-D-M-V
4” to 3” x 22” x 18” (1/2” Gel Added)
1432418-AH-CS-D-M-V
4” to 3” x 24” x 18” (1/2” Gel Added)
1532618-AH-CS-D-M-V
5” to 3” x 26” x 18” (1/2” Gel Added)
1532820-AH-CS-D-M-V
5” to 3” x 28” x 20” (1/2” Gel Added)
1543020-AH-CS-D-M-V
5” to 4” x 30” x 20” (1/2” Gel Added)
For Bariatric Drop-Seat Cushions/Wedges with Special Dimensions, fax JDM for a quote, or call
for assistance. Bariatric Drop Seats are sold separately.
Page 55
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
NOTES: _____________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Page 56
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
BACK DEVICES FOR WHEELCHAIRS
Considerations when utilizing Back Devices for wheelchairs:
1. Measurements between the push canes are sometimes required by JDM.
This is the measurement inside the two vertical posts to which the back sling is
attached. Please refer to this measurement as “I.D.” when ordering.
Example: An 18-inch wide wheelchair normally has 16 inches between the
back rest posts, as in the following illustration:
18-Inch Wide Wheelchair
“ I.D.” = 16 inches
2. Sometimes the back rest frame is tapered, being wider at the bottom than
the top. If this is the case, please advise JDM when ordering.
Page 57
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Wedged Back Pad
Measurement Instructions for Customized Wedged
Back Pads:
In order to customize a wedged back pad, please copy
page, fill in the blanks and fax to JDM .
A. __________” width from the medial border of the
scapula to the outside of the shoulder
B. __________” depth of torso
C. __________” height from cushion to approximately
1 1/2” under axilla
D. __________” width of back of wheelchair
7” W x 11” L
Example 318
(Wedged Back Pad)
Standard
Dimensions
for 318:
C
The Wedged Back Pad is designed to cushion
the back and to inhibit lateral leaning. It is manufactured as a single unit with nylon webbing. The
strapping is secured to the rear of the wheelchair
with quick release buckles. It works extremely
well on those petite individuals that most wheelchairs “swallow up.” The lateral wedges center
the resident in the wheelchair and inhibit lateral
leaning. When Visco foam is added to the centerpiece, the device will mold to the shape of the
resident’s back, thereby redistributing pressure at
the bony protuberances.
The Wedged Back Pads may be made
resident specific to accommodate special
needs. [See measuring instructions and
diagram to the right.]
A = 5”_
:
B = 5”_
C = 15.5”
D = ____
45°
B
A
Notes:
**The minimum A or B measurement can be no smaller than 3 inches.
**The maximum A or B measurement can be no larger than 6 inches.
Code #
Description
318
Wedged Back Pad
318-V
Wedge Back Pad with Center Pad Visco Elastic
Note: For Resident-Specific Wedged Back Pads, call or fax JDM for a quote.
Page 58
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Contoured Back Pads
307-18
307-18
The Contoured Back Pad works with the existing wheelchair back sling. The wrap-around lateral wedges
support the resident, providing more stability. This device is constructed of HR (High Resiliency) polyurethane
foam and laminated with one inch of Visco to redistribute pressure and conform to the resident’s back.
Standard laterals are 5” x 5” x 15” but may be modified if so needed.
Code #
Description
307-16
Contoured Back Pad for 16” Wheelchair
307-18
Contoured Back Pad for 18” Wheelchair
Page 59
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Cozie Back
The “Cozie Back” is designed to give the
patient a pressure-redistributing back without taking up any of the seating area of the
wheelchair.
The back sling is removed and replaced
with the “Cozie Back.”
Because it has G.I.V.E. (Gel Infused Visco
Elastic) as its substrate, the Cozie Back
moulds to the patient’s back. It is excellent for patients with potential skin integrity
problems, slight kyphosis, or rounded
shoulders. It’s also wonderful for just plain
comfort!
Example 302-CB-18
Code#
Description
Cozie Backs
302-CB-16
302-CB-18
302-CB-20
Cozie Back for 16” Wheelchair
Page 60
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Cozie Back with Lateral Supports
Measurement Instructions for
Customized Lateral Wedges
In order to customize a Cozie Back Lateral Wedge, please fill in the blanks and
fax to JDM .
A. ______” Width from the medial border
of the scapula to the outside
of the shoulder
B. ______” Depth of torso
C. ______” Height from cushion to approximately 1 1/2” under axilla
Example 302-CB-03BW-18
A
The Cozie Back with Laterals (03BW’s) has the same
benefits as the Cozie Back plus the addition of Lateral
Wedges.
• It has Pressure-Redistributing G.I.V.E (Gel Infused Visco
Elastic), replacing the standard wheelchair back sling.
• It takes up limited seat area, allowing the patient
to lean more comfortably into the soft, body-molding back.
• The Lateral Wedges (03BW’s) attach to the
“Cozie Back” with Velcro. The standard 03BW
Lateral Wedge measures 5” x 5” x 15”. They may be customized by filling in the attached measurements.
B
C
Note: The minimum A or B measurement can be no smaller than 3 inches,
nor can A or B measurements be larger
than 6 inches.
Code#
Cozie Backs
302-CB-03BW-16
302-CB-03BW-18
302-CB-03BW-20
Description
Price
Cozie Back with 5”x 5” x 15” Laterals for 16” Wheelchair
Cozie Back with 5”x 5” x 15” Laterals for 18” Wheelchair
Cozie Back with 5”x 5” x 15” Laterals for 20” Wheelchair Prices are subject to change without notice.
Page 61
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Cozie Back with Swing-Away Lateral Supports
302-CB-SALS-18
(Closed Position)
302-CB-SALS-18
(Opened Position)
Code#
Cozie Backs
302-CB-SALS-16
302-CB-SALS-18
302-CB-SALS-20
Description
Price
Cozie Back with Swing Away Laterals for 16” Wheelchair
Cozie Back with Swing Away Laterals for 18” Wheelchair
Cozie Back with Swing Away Laterals for 20” Wheelchair Prices are subject to change without notice.
Page 62
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Cozie Back with Swing-Away Lateral Supports
(continued)
The Cozie Back with Swing-Away Lateral Supports (SALS), have the same
benefits as the “Cozie Back” plus the Swing Away Laterals.
• They have Pressure-Redistributing G.I.V.E (Gel Infused Visco Elastic), replacing
the standard wheelchair back sling
• They take up limited seat area- allowing the patient to more comfortably lean into
the soft, body-molding back.
• The SALS attach to the wheelchair “canes” after the sling back is removed and
replaced with the Cozie Back.
These Swing Away Lateral Supports are curved (as shown on the picture) to “cup and
support” the upper torso. By simply pressing a button, they swing out of the way allowing the patient better access to the wheelchair.
When ordering please provide the wheelchair tubing
circumference.
Tubing Circumference: The distance around the tubing on most wheelchair backs is either 7/8
inch or 1 inch. To determine this distance, wrap a soft measuring tape around the tubing. If the
measurement is less than 3 inches, the tubing is 7/8 inch. If the measurement is just over 2
inches, the tubing is 1 inch.
Page 63
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
HAV-A-Backs
Example 3018
Example 3018-TALL
HAV-A-Back
Tall
HAV-A-Back
The HAV-A-Back (Horizontal And Vertical Adjustable Back) has moldable aluminum “stays” which allow the
Back to be shaped to fit the resident. This device is made with HR (High Resiliency) polyurethane foam and
with Visco, a pressure-redistributing polyurethane. This combination enhances the back’s envelopment and
immersion capabilities, thereby providing excellent pressure redistribution. The HAV-A-Back will recline up
to 30 degrees and is very easily adjusted for height accommodations.
Code #
3016
3018
3020
3022
3018-TALL
Description
HAV-A-Back (14”W x 21”H) for 16” Wheelchair
Tall HAV-A-Back for 18” Wheelchair
Note: For Bariatric Chairs 24-inches wide or larger, please call JDM.
Page 64
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Example 3018-LAT
Example 3018-LAT-TALL
Tall HAV-A-Back
with Lateral
Supports
The HAV-A-Back with Lateral Supports has all of the features of the standard HAV-A-Back (Horizontal And
Vertical Adjustable Back). In addition, these devices have padded, moldable, metal stays to provide lateral
support. Because the “stays” are a part of the back, no additional hardware is required. As the resident
applies pressure to the back, the lateral supports actually hug and support the torso.
Code #
Description
3016-LAT
HAV-A-Back with Lats (14”W x 21”H for 16” Wheelchair
3018-LAT
3020-LAT
HAV-A-Back with Lats (18”W x 21”H for 20” Wheelchair 3022-LAT
3018-LAT-TALL
Tall HAV-A-Back for 18” Wheelchair
Note: For Bariatric Chairs 24-inches wide or larger, please call JDM.
Page 65
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Bariatric Back Support With Gluteus Contour
Example: 306-18
Measurement Instructions for Bariatric Back Support
with Gluteus Contour:
Bariatric Back with
Gluteus Contour for an
18” Wide Wheelchair
(Shown with IschialStep T Cushion)
Please copy page, fill in the blanks above and include with your
order of the Kyphotic Back Support.
The Bariatric Back Support with a “Gluteus Contour” is designed and manufactured for the resident
who when seated in a wheelchair doesn’t have
enough seating-surface depth (front to back). JDM
hollows out the polyurethane at the lower half of
the back. This increases the depth available to
those individuals for proper weight bearing and
positioning when they are seated in a wheelchair.
This increased depth allows the residents to more
comfortably “slide back” in the wheelchair, thereby
reducing the constant “repositioning” due to being
pushed forward because of insufficient wheelchair
depth. All “Gluteus Contoured” Back Supports have
a minimum of one inch of pressure-redistributing
Visco foam. Seating cushions are sold separately (see next page).
NOTE: The Gluteus area has been enhanced in
order to better illustrate how to measure properly.
HOW TO MEASURE:
A = ________ “ Depth of Gluteal Contour: Measure from lumbar
recession to posterior extent of buttocks.
B = ________” Height of Contour: Measure height of buttocks as
shown above; then add two (2) inches to this
measurement.
C = ________” Overall Height: Measure from seating surface to
top of head.
D = ______________________ Size of Wheelchair.
If you have any questions concerning measurements for the
Bariatric Back Support, please call JDM. We are happy to assist you.
Code #
306-18
306-20
306-22
306-24
306-26
306-28
306-30
Description
Resident-Specific Bariatric Back with Gluteus Contour for 18” Wide W/C
**Measurements are required with order. See instructions above.
Page 66
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
T-Cushions for Bariatric Back Supports
Gap
Bariatric T-Cushion for
Bariatric Back Support
Bariatric Back Support
Without T-Cushion
(Example: Ischial Step Wedge)
(Gap is exposed)
Bariatric Back T-Cushions or Wedges are designed specifically for the Bariatric Back Support. (Please see previous page.) After removing the sling back and attaching the Bariatric
Back, the seat depth is increased. This increase creates a gap between the sling bottom of the
wheelchair and the back. (See illustration pictured above.) These cushions accommodate for
that gap. T-Cushions are available in the same types as cushions normally manufactured by
JDM. They are a solid-insert type.
For pricing and design (Flat, Wedge, Coccyx-Scoop, Coccyx Cut-Out,
Ischial, etc.) please call JDM.
Page 67
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Kyphotic Back Support
Measurement Instructions for Kyphotic Back Supports:
Please copy page, fill in the blanks above and include with your order of
the Kyphotic Back Support.
With the patient seated upright, fill in the following:
1 = ________ “ Distance from the seating surface to start of Kyphosis;
then add two (2) inches to this measurement
2 = ________” Distance from start of Kyphosis to top of Kyphosis
(Measurement is as show in the brackets above, not
Kyphotic Back Supports are always made to be
resident specific. [Please refer to next measuring
instructions to the right.] These devices are manufactured with an area cut out to accommodate
the bony protuberance of the resident’s Kyphotic
spine. These devices have a solid insert, cushioned by the layering of various grades of HR and
Visco polyurethane foams. These combinations
provide support, pressure-redistribution, shockabsorbing, and body-molding properties along the
entire affected spinal region. Used in conjunction
with a reclined drop seat and the proper seating
cushion, the Kypho-Back works well for those
individuals who “C” shape forward in a wheelchair.
following the curve of the spine.)
3 = ________” Width of Kyphosis (See Note A below.)
4 = ________” Size of wheelchair
Note A: To allow sufficient space for the lateral wedges:
*If the wheelchair is 18” wide, the maximum measurement
of #3 (above) may be 10 inches.
*If the wheelchair is 16” wide, the maximum measurement
of #3 (above) may be 8 inches.
Note B: In order to add a headrest to the Kyphotic Back Support,
please measure from the seating surface to the top of the
patient’s head; then add two (2) inches.
If you have any questions concerning measurements for the
Kypho-Back, please call JDM. We are happy to assist you.
Code #
305
Description
Price
Kypho Back: Includes Back Support, Visco
Lamination and Lateral Wedges
**Measurements are required with order; refer to instructions above.
Page 68
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
The Extended Back Support is manufactured so that
the resident may be reclined slightly, or not. The
standard height is 33 inches, but it can be made taller
in order to be more resident specific. As with all of
JDM’s Back Supports, you may add lateral wedges,
lumbar rolls, various head supports and occipital
supports as needed.
Some common reasons for ordering an Extended Back
Support are:
1) The resident has head or neck flexion problems.
Slightly reclining him or her brings the head back.
2) The resident‘s height dictates the need for more
support along the spinal and torso areas.
3) The resident has a “restraining belt” which might
not be necessary if he or she were slightly reclined.
Example 302-E
All Extended Back Supports have a minimum of one
inch of HR foam and one inch of soft Visco foam. This is
necessary due to the increased weight bearing along the
spine when the resident is in a reclined position.
2” Thick x 16” Wide x 33” High
For any ordering questions, please call JDM for
assistance.
Code #
Description
302-E-V
Extended Back Support (2” x 16”W x 33”H) for 18” W/C
(Thickness includes 1” HR Foam & 1” Soft Visco)
302-E-SYS-V
The 302-E-V with two of the following options:
Please choose two options listed below:
1) Head Support (Item 302 or 304)
2) Lateral Wedges (Item 03BW)
3) Adjustable Lumbar Roll (Item 310 or 311)
4) Additional one inch of HR or Soft Visco Foam
Page 69
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Adjustable Lateral Supports
302-ADJ-LAT
302-ADJ-LAT
(Back View)
(Front View)
Adjustable Lateral Supports are adjustable vertically (up/down along torso), horizontally (to
accommodate patient’s width) and in-and-out (to accommodate girth). “Rigid Stays” in contoured
laterals grip the resident’s torso to inhibit forward and lateral leaning. These Adjustable Lateral
Supports may be added to any of JDM’s rigid back supports; i.e., the Kypho Back, the Bariatric
Back, Extended Back and the Reclining Back.
Code #
302-ADJ-LAT
Description
Adjustable Lateral Support Set
Page 70
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Lateral Wedges
Customized Lateral Wedges
Lateral Wedges for
In order to customize a wedged back
pad, please fill in the blanks and fax to
JDM .
A. ______” Width from the medial border
of the scapula to the outside
of the shoulder
B. ______” Depth of torso
C. ______” Height from cushion to approximately 1 1/2” under axilla
A
B
Example: 03BW
Lateral Wedge for Extended Back Support
(5” x 5” x 15.5”)
C
Note: The minimum A or B measurement can
be no smaller than 3 inches, nor can A or B
measurements be larger than 6 inches.
These Lateral Wedges may be added to any of JDM’s rigid back supports; i.e., the Kypho Back, the
Bariatric Back, Extended Back and the Reclining Back. They also may be ordered for the Cozie Back.
Price List (Stock Item)
Code #
03BW
Description
Lateral Wedge for Extended Back Support
(5” x 5” x 15.5”)
Page 71
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Cylinder Lumbar Rolls
Winged Head Support
Example: 311
(Quarter Cylinder Lumbar Roll )
Example: 302
The Quarter-Cylinder Lumbar Roll fits the contour of the lumbar region. The device attaches by
Velcro. It fits flat against the back support.
The Half-Cylinder Lumbar Roll inhibits poor posture and is effective in maintaining proper lumbar
lordosis. (Not Pictured.)
The Winged Head Support provides contoured support at the occipital area. The device attaches
by Velcro and it fits flat against the Back Support. The Winged Head Support may be used with the
Extending Back Support, the Reclining Back, the BRODA Kit and the HTR Kit.
Code #
302
310
311
Description
Winged Head Support
Half-Cylinder Lumbar Roll for Extended Back Support
Quarter-Cylinder Lumbar Roll for Extended Back Support
Page 72
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
The Head Support for the
Head Support
Extended Back is attached with
Velcro to JDM’s Extended Back
Support, which has a soft nylon felt
on the head portion of the device.
It can inhibit lateral leaning of the
head and is easily customized.
Example 304
Customized Head Supports
C
For special dimensions, refer to
the diagram on the left and fill in
the following dimensions:
A
Standard
Dimensions:
A = 5 1/2”
B = 1 1/2”
A. ______” total thickness front to back
B. ______” thickness at back of head
C. ______” width of head itself
C = 7 1/2”
B
Code #
304
Description
Head Support for Extended Back Support System
Page 73
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Strap Backs and Pads
Example 303-RB
Strap Back-Tall that will adjust for 16” thru 22”
wide Reclining Back W/C
(Shown without Pad for illustrative purposes)
Example 303-RB
Finished Strap Back-Tall shown with Pad
This adjustable back support positions the user in multiple ways. It is adjustable to fit the Reclining
Back wheelchairs that have seat widths from 16” to 22” wide. In addition to allowing for a wide variety
of wheelchair widths, the adjustable straps also allow for “tightening” and” loosening” along the entire
back area. These adjustable straps working in conjunction with the pressure redistributing, body molding pads make this back an excellent positioning device for rounded shoulders, slight Kyphosis, Scoliosis and overall comfort. The Strap Back pads are tapered to prevent the Reclining Backs upright push
canes from adding pressure to the Scapula and shoulder areas. All Strap Backs allow for JDM’s SwingAway Lateral Supports. For Sizes 24” to 30” please call JDM for assistance.
Code #
Description
Price
303-RB
Tall Strap Back that will adjust for 16” thru 22” wide Reclining Back W/C
(This price includes the 303-RB-PAD)
$298.50
303-RB-PAD
Replacement Pad (if needed) made to fit 16” to 22” wide Reclining
Back W/C for a 303-RB
$ 45.00
Page 74
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Strap Backs and Pads
Example 303-ST
Example 303-ST
Strap Back-Short that will adjust
for 16” thru 22” wide W/C
(Illustrated without Pad
(BELOW)
(Completed Product)
Strap Back-Short with Back Pad
(BELOW)
(ABOVE)
Strap Back Short
Illustrated from
Back View
This adjustable back support positions the user in multiple ways. It is adjustable to fit standard SlingBack wheelchairs that have seat widths from 16” to 22” wide. In addition to allowing for a wide variety of
wheelchair widths, the adjustable straps also allow for “tightening” and” loosening” along the entire back
area. These adjustable straps working in conjunction with the pressure redistributing, body molding
pads make this back an excellent positioning device for rounded shoulders, slight Kyphosis, Scoliosis
and overall comfort. The Strap Back pads are tapered to prevent the wheelchairs upright push canes
from adding pressure to the Scapula and shoulder areas. All Strap Backs allow for JDM’s Swing-Away
Lateral Supports. For 24-inches to 30-inches, please call JDM Medical for assistance.
Code #
Description
303-ST
Short Strap Back that will adjust for 16” thru 22” wide W/C
(Includes Back Pad)
303-ST-PAD
Replacement Pad (if needed) made to fit 16” to 22” wide W/C
with a 303-ST
Page 75
Price
$228.50
$ 45.00
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
NOTES: _____________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Page 76
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Slip-On Wheelchair Arm/Lateral Body Support
Example 208-L
Left Wheelchair Arm/ Lateral
Body Support
The Wheelchair Arm/Lateral Body
Support covers the entire arm rest. It
provides some lateral support as well
as a padded surface on which the
patient may rest his or her arm. When
rigid supports are needed, JDM recommends Static Arm Troughs or Articulating
Arm Troughs. (These are items 210, 211
and 212 presented on the following
pages.)
All Slip-On Bolsters are designed
to prevent skin tears and breakdowns
caused by contact with metal. In
addition, they provide some later
support.
These bolsters are covered with a
fluid-proof material and are closed with
Velcro to prevent any body fluid contamination. The polyurethane used is a
high resiliency type which is expected to
maintain its properties for 8 to 10 years
under everyday usage.
Code #
208-L
208-R
208-L-E
208-R-E
Description
Left Wheelchair Arm/Lateral
Right Wheelchair Arm/Lateral
Elevated Left Wheelchair Arm/Lateral
Elevated Right Wheelchair Arm/Lateral
Page 77
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Static Arm Troughs
Arm Troughs are excellent for
Example 210-L
individuals with flaccid arms or for
Arm Trough for Left Wheelchair Arm
individuals who need to support
themselves by leaning on their elbows.
In either case, the device is designed
to redistribute any increased pressure
by the lamination of Visco Elastic. This
device is attached with a static tray that
slips over the arm rest.
.
As with all of JDM’s devices, these
Arm Troughs are covered with a medical grade fabric, which is an incontinent
proof, antibacterial, anti-fungal, selfdeodorizing, and stain-resistant material.
Code #
Description
210-L
Wheelchair Arm Trough for Left Side
210-R
Wheelchair Arm Trough for Right Side
Page 78
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Articulating Arm Trough
Example: 211-R
Example: 211-R
(Elevated Articulating Arm Trough in
Standard Position)
(Elevated Articulating Arm Trough
Rotated Slightly Inward and Extended Forward)
The Articulating Arm Trough rotates 90 degrees internally and can travel forward 6 inches to extend
the arm rest length. It may be purchased with a removable trough (pictured above) or with a flat
pressure-redistributing pad. It has three swivel locations in 2-inch increments.
Code #
211-L
211-R
212-L
212-R
Description
Elevated Articulating Arm Trough - Left
Elevated Articulating Arm Trough - Right
Flat Articulating Arm Trough - Left
Flat Articulating Arm Trough - Right
Page 79
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Static Lap Tray
Static Lap Trays are designed to
fit standard arm wheelchairs. These
trays slide over the armrest with
Z-Bars for lateral support. Static
Lap Trays are padded with one inch
of HR polyurethane foam, are
covered with an incontinent proof,
antibacterial, anti-fungal, self-deodorizing, and stain-resistant material.
They attach around the back of the
Example 1500
wheelchair with nylon webbing.
Static Full Lap Tray
Code #
Description
1500 Static Full Lap Tray
1504-R
Static Right Half Lap Tray
1504-L
Static Left Half Lap Tray
Page 80
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Flip-Away Lap Trays
Flip-Away Tray
with Tray Up
Flip-Away Tray with Tray Down
Above Example 1505-L (Left)
Code #
Description
1505-R
Right Flip-Away Lap Tray 1505-L
Left Flip-Away Lap Tray
1505-R-E
Elevated Right Flip-Away
Lap Tray
1505-L-E
Elevated Left Flip-Away
Lap Tray
Flip-Away Lap Trays are excellent
Price
for flaccid arms. They offer some
lateral and forward motion support.
They flip up and away for easy
transfer. Flip- Away Lap Trays are
covered with an incontinent proof,
antibacterial, anti-fungal, self-deodorizing, and stain-resistant material.
Page 81
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid Bolsters
Solid Bolsters are multifunctional devices.
Solid Bolsters are best used under the knees
for support when the heels are elevated.
They may be used in bed as a “neck roll.”
When placed vertically against the resident’s
torso, they may be effective in preventing
lateral leaning. When placed horizontally
against the thigh, bolsters can assist in
properly aligning the hips of the seated
resident.
All Solid Bolsters are covered with a fluidproof fabric and are flap-zipper closed to
prevent foam from being exposed to body
fluids. The foam is a highly resilient polyurethane, expected to maintain its cushioning
properties for 8 to 10 years under
everyday usage.
Example: 2516-SB
5” Diameter x 16” Length
Code#
Description
(Diameter x Length)
2610-SB
2412-SB
2316-SB
2416-SB
2516-SB 2616-SB
2320-SB
2420-SB
2520-SB 6” x 10”
4” x 12”
3” x 16”
4” x 16”
5” x 16”
6” x 16”
3” x 20”
4” x 20”
5” x 20”
Solid Bolster
Solid Bolster Solid Bolster Solid Bolster
Solid Bolster
Solid Bolster
Solid Bolster
Solid Bolster
Solid Bolster
Price
For Solid Bolsters with Special Dimensions, fax JDM for a quote, or call for assistance.
Page 82
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Wheelchair Arm/Lateral Bolsters
Example 2416-LAB
16” Arm/Lateral Bolster
The Wheelchair Arm/Lateral Bolster
is a combination of a wheelchair arm
bolster and a lateral support. It inhibits
some lateral leaning, cushions the sides,
protects the arms from skin tears, and
prevents bruising.
This device attaches with Velcro for
easy-on and easy-off convenience.
The Bolsters are made with HR foam
and are covered medical-grade fabric.
JDM recommends these devices for
residents with minor leaning
problems.
Code #
Description
2410-LAB
2414-LAB
2416-LAB
Price
Note: For Resident-Specific Arm/Lateral Bolsters, call or fax JDM for a quote.
Page 83
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Slip-On Arm Bolsters
Slip-On Bolsters are designed to cover
Example 2516-WCA
wheelchair arm posts in order to protect
5” Diameter x 16” Length
to fit Wheelchair Arms
the skin integrity of the resident. These
bolsters cushion and prevent tears and
skin breakdown common to the upper
extremities.
Slip-On Bolsters are made with HR
polyurethane foam and are covered with
a medical grade fabric, which is an incontinent proof, antibacterial, anti-fungal,
self-deodorizing, and stain-resistant
material; therefore, they are preferred
over pipe insulation and other closed-cell
applications.
Code #
2410-WCA
2510-WCA
2610-WCA
2412-WCA
2416-WCA
2516-WCA
2616-WCA
2520-WCA
Description
4” x 10” 5” x 10” 6” x 10”
4” x 12” 4” x 16” 5” x 16”
6” x 16”
5” x 20”
For Special Dimensions, contact JDM for assistance.
Page 84
Price
Each
or
Pair
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Slip-On Leg Bolsters
The Culprit
Exposed
Wheelchair
When the wheelchair leg rests are removed,
Leg
the brackets create a sharp edged “hook” that
Brackets
is notorious for generating skin tears. Sharp
metal and fragile skin do not mix well.
Improper Measures
Taking measures to prevent skin tears is imperative, but certain methods used to cover
these metal brackets are improper. Pipe insulation, sheep skin, noodles and foam wrapped in
masking tape are unsightly, unsanitary, unsafe
and sometimes illegal.
Pipe Insulation
Sheepskin
Proper Measure
Wheelchair
Leg
Bolsters
Item #
246-WCL
Code#
246-WCL
246-WCL-CASE
The proper way to protect the legs from wheelchair leg rest brackets is by “bolstering” them
with a covered, staph-checked, hypo-allergenic, moisture-proof, soft polyurethane foam,
such as JDM’s Wheelchair Leg Bolsters.
Description
Set of Wheelchair Leg Bolsters (4” x 6”)
Case of 16 Pairs of W/C Leg Bolsters (4” x 6”)
Page 85
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Rectangular Bolsters
Rectangular Bolsters are very efficient at
Example: 30516-R
keeping the hips and legs positioned properly in the wheelchair. They inhibit sideway’s
3” Thick x 5” High x 16” Deep
sitting by blocking the lateral movement
(sweeping) of the hips and legs. The bolsters
may be secured by attaching Velcro, straps
or anti-skid materials.
All bolsters are covered with a fluid-proof
material and flap-zippered closed to prevent
any body fluid contamination. The polyurethane used is a high resiliency type which is
expected to maintain its properties for 8 to 10
years under everyday usage.
Code#
Description
Price
(Thickness x Height x Depth)
20516-L
2” Thick x 5” High x 16” Deep (Left)
20516-R
2” Thick x 5” High x 16” Deep (Right)
30516-L
30516-R
For Rectangular Bolsters with Special Dimensions, fax JDM for a quote, or call for assistance.
Page 86
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Hip Bolsters
Example: 521516-R
2” Thick x 15” High x 16” Deep
for Right Side of Wheelchair
Hip Bolsters are designed to support the
torso. The torso portion should be approximately
two inches shorter than the distance from the
wheelchair seat to the axilla. This positioning
prevents undue pressure being placed under the
axilla. The device also extends front to back in
the wheelchair to prevent the leg from “sweeping.”
Hip Bolsters are covered with a medical grade
fabric, which is an incontinent proof, antibacterial,
anti-fungal, self-deodorizing, and stain-resistant
material. They are manufactured with a wood
insert that is 1/2-inch thick and the foam is
normally two to three inches thick. The depth is
determined by the size that is needed to support
the entire upper leg while the patient is seated.
The device may be customized by calling JDM
Medical. Please inform our customer service
representative of the thickness, height and size
of the wheelchair. Please state whether the Hip
Bolster is for the (R) right or (L) left side of the
wheelchair.
Code#
521516-R
521516-L
531516-R
531516-L
Description
(Thickness x Height x Depth)
Price
(Each)
**When Hip Bolsters are ordered in pairs, JDM will discount the price by 10 percent.
For Hip Bolsters with Special Dimensions, fax JDM for a quote, or call for assistance.
Page 87
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Set of Lateral Supports for Wheelchairs
The Lateral Supports have a solid insert to prevent those residents who have severe lateral leaning problems from climbing out of the wheelchair.
Example 503
Set of Lateral Supports
Customized Lateral Supports
These devices are made resident specific by
measuring the following dimensions:
A. _______” depth of torso
B. _______” height from wheelchair cushion to
approximately 1.5” under axilla
C. _______” length of support against side of
leg while seated
D. _______” thickness (not less than 2”)
E. _______” height along thigh
A
Code #
503
Description
Price
B
E
Set of Standard Lateral Supports
For Wheelchairs
For Special Dimensions, please refer to diagram
on right and call or fax JDM for price quote.
C
Note: The measurement for “D” may
not be less than two inches.
Page 88
D
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Short-Arm Lateral Bolsters
Example 209-R
Right Short-Arm Wheelchair Lateral Bolster
The Short-Arm Lateral Bolster is
designed to fit the desk-arm type of
wheelchair.
All Slip-On Bolsters are designed to prevent skin tears and breakdowns caused
by contact with metal. In addition, they
provide some lateral support.
These bolsters are covered with a fluidproof material and are closed with Velcro
to prevent any body fluid contamination.
The polyurethane used is a high resiliency
type which is expected to maintain its
properties for 8 to 10 years under
everyday usage.
Code #
Description
Price
209-L
Left Short-Arm Wheelchair Lateral
209-R
Right Short-Arm Wheelchair Lateral
Page 89
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
NOTES: _____________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Page 90
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
A Flexible Calf Support is a simple
yet effective method of preventing skin
tears and inhibiting knee flexion. This
device consists of a one-inch piece of
polyurethane foam covered with a medical grade fabric, which is an incontinent
proof, antibacterial, anti-fungal, selfdeodorizing, and stain-resistant material.
It is attached to the wheelchair leg posts
using Velcro closures for easy-on/easyoff convenience.
The Flexible Calf Support may be
Example 403
used in conjunction with the wheelchair
footrest covers (Code #400, page 91) to
1” Thick x 20” Wide x 8” High
make a soft, effective foot and calf support system.
Code #
403
Description
Price
For wheelchairs wider than 18 inches, call or fax JDM for a price quote.
Page 91
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
The Slip-On Foot and Calf Pad is a
one-piece item designed to prevent
skin tears on the lower extremities of
the wheelchair-bound residents. It is
an excellent device for those residents
with leg-contracting problems and/or
sensitive skin.
This device slips on over the foot pads
and attaches to the back of the wheelchair leg posts using 3 sets of Velcro
straps and a buckled nylon webbing.
The device does not have to be
removed even during patient
transfers.
As with all of JDM’s devices, the
Slip-On Foot and Calf Pad is covered
with a medical grade fabric, which is an
incontinent proof, antibacterial, anti-fungal, self-deodorizing, and stain-resistant
material.
Example 410
Code #
410
Description
Page 92
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Foot Rest Covers
The Foot Rest Covers slip over the foot
rests to cushion the resident’s feet and
ankles from the hard metal. JDM’s Foot
Rest Covers are attached with Velcro
straps, which flip up and out of the way
for easy transfer.
The Foot Rest Covers may be used in
conjunction with the Flexible Calf
Example 400
Support (Code # 403) to make a soft,
Set of Foot Rest Covers
effective Foot and Calf Support System.
Code #
400
Description
Set of Foot Rest Covers
Page 93
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Wheelchair Foot Boxes
Foot Box In Standard Position
Foot Box Flipped Away
Example 420-L
Code #
Description
420-L
Foot Box for Left Foot
420-R
Foot Box for Right Foot
Price
A Foot Box is an excellent product for patients
who have a flaccid leg, internal or external foot
rotation, foot drop, or contractures of lower extremities (provided the extremity will range forward enough to rest on wheelchair foot rests).
The device is attached to wheelchair leg posts,
yet may be “flipped” out of the way for patient
transfer.
The Foot Box is covered with a medical grade
material. The device may be manufactured to be
resident specific by calling JDM Medical.
Page 94
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Easy Foot Cradle
Easy Foot Cradle Flipped Away
Easy Foot Cradle In Standard Position
Example 411-18
Easy Foot Cradle for 18” Wheelchair
Code #
Description
411-16
Easy Foot Cradle for 16” W/C
411-18
411-20
Price
The Easy Foot Cradle has contoured leg
troughs with heel cut-outs to reduce skin
breakdown. It attaches to the swing-away
leg rest with a hook that secures it for swingaway and for easier patient transfer.
When not swung away, it stays secured with
a strap and buckle to prevent any slippage.
It is available in 16-inch, 18-inch and 20-inch
widths. For other sized chairs, please contact
JDM for pricing.
Page 95
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Adjustable Knee Adductor
Example 625-R
The Adjustable Knee Adductor has
multiple adjustments to accommodate
various sweeping problems. It may be
adjusted in, out, up or down. It can be
attached to wheelchair leg posts or
to swing away leg posts. The pad is
3 inches thick (1-inch HR foam and 2
inches of Visco) to absorb impact and to
prevent skin tears.
Code #
Description
625-L
Adjustable Knee Adductor for Left Knee
625-R
Adjustable Knee Adductor for Right Knee
Page 96
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Leg Abductor
The Leg Abductor straps around
both lower extremities with a soft
nylon felt. It works well for patients
in a wheelchair or lying in a bed.
Leg Abductors are designed to hold
hips in abduction, to distribute
pressure evenly over thighs and
to increase sitting stability. This
Example 601
device can be customized.
5” Wide x 6” High x 6” Deep
Code
Description
601
Leg Abductor (5”W x 6”H x 6”D)
602
Leg Abductor (3”W x 6”H x 6”D)
Page 97
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Flip-Down Abductors
Example 021816-F
(Cushion 2” Thick x 18” Wide x 16” Deep
With Flip-Down Abductor)
The Flip-Down Abductor is designed to abduct
the lower extremities at the area of the knees.
Previously, many health-care professionals
To the Left:
Flip-Down
Abductor in
Upright and
Locked
Position
utilized “groin abductors” with solid inserts to
inhibit sliding. A groin abductor, unless it is
designed to break away, may cause injury to a
resident. Regular abductors placed in the
immediate seating area may make it more
difficult for the individual to rise from the
wheelchair; hence, JDM offers the Flip-Down
Abductor. It flips down and out of the way for
easy transfer. The Flip-Down Abductor can be
To the Right:
Flip-Down
Abductor in
Down and
Free Position
sized to inhibit crossover as well as to prevent
adduction. The abductor may be placed on any
cushion, wedge, or drop seat that JDM manufactures. To order a customized Flip-Down
Abductor, please refer to next page.
Standard Flip Down Abductor:
4” Wide x 4” Deep x 5” High (above top of cushion)
Feature Code
F
EXFD
Description
Flip-Down Abductor added to cushion, wedge or seat
Flip-Down Abductor ordered separately from cushion
Page 98
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Measurement Instructions for Flip-Down Abductors
In order to customize a flip-down
abductor’s height, width, or depth
from our standard Flip-Down
Abductor, please fill in the blanks
and fax to JDM.
E. __________” depth of abductor
F. __________” width of abductor (no less than 4”)
G. __________” height of abductor (maximum of 10”
from bottom of cushion)
**NOTE** In order to extend a cushion’s depth beyond the front wheelchair
posts, JDM notches the solid insert to fit properly.
Page 99
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Solid-Back Foot and Calf Supports
Solid-Back Foot and Calf Supports
protect the wheelchair-seated resident from
skin tears and also inhibits knee flexion.
JDM’s Solid-Back Foot and Calf Supports
come in separate units, allowing one or the
other to be easily removed during transfers.
However, if you prefer, you may request
the Foot and Calf Supports to be manufactured as one solid unit. (See Item#
4016 in the price list below.)
The Solid-Back Foot and Calf Supports, as
their names suggest, have solid inserts. They
Examples 401 and 407
1” Thick x 20” Wide x 12” High Calf Supt.
and
2” Thick x 20” Wide x 12” Deep Foot Supt.
are covered with foam for comfort. These
devices attach with Velcro to the wheelchair
leg posts and foot rests for easy removal.
Code #
Description
401
402
Solid Back Calf Supports:
Solid-Back Calf Support 1” x 20” Wide x 12” High
Solid-Back Calf Support 2” x 20” Wide x 12” High
406
407
Solid Back Foot Supports:
Solid-Back Foot Support 1” x 20” Wide x 12” High
Solid-Back Foot Support 2” x 20” Wide x 12” High
4016
Solid Back Calf & Foot Support As a Single Unit
401 & 406 (above) As a Single Unit Prices are subject to change without notice.
Page 100
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Solid-Back Calf Support With Heel Cutouts
Heel Cutouts are made available
for the Solid-Back Calf Support
for those patients who have heel
decubs. These devices protect the
wheelchair-seated resident from
skin tears and also inhibits knee
flexion. JDM’s Solid-Back Foot and
Calf Supports come in separate
units, allowing one or the other to be
easily removed during transfers.
The devices have solid inserts
and are covered with foam for
Example 401-C
1” Thick Solid-Back Calf Support
with Heel Cutouts
(The Foot Support is sold separately.)
comfort. They attach with Velcro
to the wheelchair leg posts and
foot rests for easy removal.
Code #
Description
401-C
with Heel Cutouts
402-C
2” Thick Solid Back Calf Support
with Heel Cutouts
Price
Note: These devices may be made with abductors if desired. Please call JDM for a price quote.
Page 101
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Solid Back Foot & Calf Support with Abductor
Abductors may be added to either
the Solid-Back Foot Support or the
Solid-Back Calf Support.
The abductor added to the SolidBack Foot Support is designed to
help prevent internal rotation of the
feet. The abductor added to the
Solid-Back Calf Support aids in the
abduction of the lower legs.
Example: 401-A
with Abductor
(The Foot Support is sold separately.)
JDM strongly advises using both
the Solid-Back Calf and Foot
Support together as a unit for the
maximum stability of the abductor.
Code #
401-A
402-A
Description
Solid-Back Calf Supports:
Solid-Back Calf Support (1” x 20” x 12”) with Abductor
Solid-Back Calf Support (2” x 20” x 12”) with Abductor
Note: The above devices may be made with Heel Cutouts
if desired. Please call JDM for a price quote.
406-A
407-A
Solid-Back Foot Supports:
Solid-Back Foot Support (1” x 20” x 12”) with Abductor
Solid-Back Foot Support (2” x 20” x 12”) with Abductor
Page 102
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Geri Chair Torso Supports
The Geri Chair Torso Support is designed
to support and align the resident in the
middle of the Geri Chair. This device
works particularly well for slightly Kyphotic
individuals due to the “open area” created
by the Lateral Support “Legs” of the Torso
Support. The Torso Support attaches to
the Geri Chair with Velcro bands stretched
around and behind the chair to prevent
movement of the device in the Geri Chair.
The Geri Chair Torso Support comes with
a Lumbar Roll, which easily attaches with
Velcro to the soft, nylon-felt along the
mid-back portion of the Torso Support.
Attachable Head Supports and Occipital
Supports are available upon request. The
Torso Support may also be modified by
changing its overall height.
As with all of JDM’s devices, the Torso
Support is covered with an incontinent
proof, antibacterial, anti-fungal, selfdeodorizing, and stain-resistant
material.
Example 800
(Seating Cushions Sold Separately)
Code #
Description
(Height x Width)
800
Geri Chair Torso Support (33” x 20”)
801
Geri Chair Torso Support (29” x 20”)
Page 103
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Head Supports for Geri Chairs
Head Supports come attachable in two
different ways:
1) Head Supports #804 and #806 attach
with Velcro to JDM’s Torso Supports,
which have a soft nylon felt on the head
portion of the device, and are shaped to
fit the Torso Support.
Example 804
Dual Side Head Support with Velcro
2) Head Supports #805 and #807 attach
to the Geri Chair with Velcro straps that
extend around and behind the
chair, and are flat backed to fit the Geri
Chair without a Torso Support.
C
Customized Head Supports
A
For special dimensions, refer to the
diagram on the left and fill in the following dimensions:
Standard
Dimensions:
B
A. ______” total thickness front to back
A = 5 1/2”
B = 1 1/2”
B. ______” thickness at back of head
C. ______” width of head itself
C = 7 1/2”
Code #
804
805
806
807
Description
Dual Side Head Support with Velcro to fit Torso Support
Dual Side Head Support to fit Geri Chair without Torso Supt.
Single Side Head Support with Velcro to fit Torso Support
Single Side Head Support to fit Geri Chair without Torso Supt.
Page 104
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Cervical Pillows
Cervical Pillows help the neck and
shoulder muscles to relax. They fit
the contour of the neck and promote
proper neck/head position. They
work well in beds, Geri-chairs or
extended wheelchair backs.
Cervical pillows are filled with Dacron and are covered with an incontinent proof, antibacterial, anti-fungal,
Example 808
self-deodorizing, and stain-resistant
material.
Code
808
Description
Cervical Pillow (does not attach to a device)
Page 105
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Geri Chair HR Wedges and Ischial Steps
Example: 1321820-AS-I-T-V
3”-2” X 18” x 20” Ischial Step
to fit Torso Support
Generally, the reason to use a Geri-Chair
Wedge is to keep the resident’s hips at the
back of the Geri Chair. The Geri-Chair Ischial
Step utilizes the natural curvature of the body
to give an “Anchor Support.” Ischial Steps
inhibit the hips from sliding forward without
using any type of “groin” abductor; therefore,
they are not considered a restraint by most
survey teams. Ischial Steps are layered with
Visco on the back portion for pressure redistribution. These devices have an Anti-Skid
bottom to prevent them from sliding, even
when in a reclined position.
Geri Chair Wedges and Ischial Steps are
modifiable. By utilizing the same feature code
system explained in our Wheelchair Wedge
section, you can make the Geri Wedge resident specific. Please call JDM for assistance
and pricing for any Geri Wedge not listed
below.
Code #
Description
1321820-AS-T-V
1421820-AS-T-V
Geri-Chair Wedges:
Geri Wedge 3” to 2” by 18”W x 20”D with Visco
Geri Wedge 4” to 2” by 18”W x 20”D with Visco
1321820-AS-I-T
1321820-AS-I-T-V
1421820-AS-I-T
1421820-AS-I-T-V
Geri-Chair Ischial Steps:
Geri-Chair Ischial Step 3” to 2” by 18”W x 20”D
Geri-Chair Ischial Step 3” to 2” by 18”W x 20”D with Visco
Geri-Chair Ischial Step 4” to 2” by 18”W x 20”D
Geri-Chair Ischial Step 4” to 2” by 18”W x 20”D with Visco
Page 106
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Abducted Knee Lifts
Diagram of Large Abducted Knee Lift
5.5”
9”
13”
Example: 812-LG
Example: 812-SM
20”
The Abducted Knee Lift allows you to extend the resident’s lower extremity in the Geri
Chair, while abducting at the knees. The Large
Abducted Knee Lift may also be used in bed
positioning.
This item is not customizable. For
contracture management, or for positioning
a resident with special needs, you may
order resident-specific knee wedges.
Code #
812-LG
812-SM
Description
Large Abducted Knee Lift
Small Abducted Knee Lift
Page 107
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Set of Lateral Supports for Geri Chairs
Lateral Supports have a solid insert to prevent
those residents who have severe lateral leaning
problems from climbing out of the Geri Chair.
Customized Lateral Supports
These devices are made resident specific by
measuring the following dimensions:
A. _______” depth of torso
B. _______” height from Geri-Chair cushion to
approximately 1.5” under axilla
C. _______” length of support against side of
leg while seated
D. _______” thickness (not less than 2”)
E. _______” height along thigh
Example 803
A
Code #
803
Description
Price
B
Note: Lateral Supports can be made for wheelchairs
also. Call JDM for pricing and instructions.
E
For Special Dimensions, please refer to diagram
on right and call or fax JDM for price quote.
C
Note: The measurement for “D” may
not be less than two inches.
Page 108
D
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Foot Box for Geri Chair
The Geri Chair Foot Box is a
padded device which positions a patient’s legs on a Geri-Chair leg rest.
The Foot Box prevents the patient’s
legs from sliding off to the side.
The lateral sides are reinforced with
solid inserts for support. The device
is padded with HR Polyurethane
to provide comfort. The Foot Box
attaches with adjustable straps and
buckles, and the back is covered
Example 840
with an anti-skid material to prevent
the device from sliding.
Geri Chair Foot Box
Code #
840
Description
Geri Chair Foot Box
Page 109
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Slip-On Arm Bolsters (left) are
Slip-On Arm Bolsters
for Geri Chair
designed to cover Geri Chair arms in
order to protect the skin integrity of
220-GCA
the resident. The Slip-On Bolsters
cushion and help prevent bruises
and skin breakdown common to the
upper extremities. If Arm Rests are
wider than 2 inches, please notify
JDM.
Lumbar Roll for Geri Chair
Torso Support
(Product Code: 810)
Full Cylinder Lumbar Rolls
attach between the Torso Support
“Legs” (as illustrated in picture to the
right) and are easily placed up or
down the spine to promote proper
Lumbar Lordosis positioning.
Code #
220-GCA
810
Description
Set of Geri Chair Slip-On Arm Bolsters
Lumbar Roll for Geri Chair Torso Support
Page 110
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Fall Mat
Fall Mat
(Product Code 900-FALL-MAT)
The Fall Mat measures 2 inches thick by 24 inches wide x 70 inches long. It has
bevelled edges to allow wheelchairs to roll easily on and off. The mat folds in half
for easy storage and is easily wiped clean. The anti-skid bottom holds it securely in
place, while allowing the high-density rebond foam to absorb impact.
Code #
900-FALL MAT
Description
Fall Mat with Bevelled Edges
(2” x 24” x 70”)
Page 111
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Side-Lying Knee Abductor
The Bolster secures behind the knees,
while the abductor cushions between
the knees preventing further contractures. This device works when in a
side-lying position.
Code #
615
Description
Page 112
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Side-Lying Wedge
Example 130-24
Example: 1031-24
The Side-Lying Wedge is 12 inches high and 12 inches along the base. It is cut at a 45
degree angle. In addition to being utilized for side lying and tube feeding, the wedge is an
excellent device to keep residents with falling problems in their beds. These wedges are
covered in an incontinent proof, anti-bacterial, antifungal, self-deodorizing and stain-resistant
fabric.
Code #
1031-24
1031-28
1030-24
Description
Price
Side-Lying Wedge (12”High x 12” Base x 24”Length; 45° Angle
For sizes not listed above, call JDM for a price quote. We will manufacture to your specifications.
Page 113
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Double Side-Lying Wedge
Double Side-Lying Wedges are each
12 inches high and 12 inches along
the base. They are cut at 45 degree
angles. These wedges are attached by
a strapping, which wraps under the
mattress to prevent the wedges from
moving. In addition to being utilized
for side lying and tube feeding, these
wedges are excellent devices to keep
residents in bed who have a falling
problem.
Example 1031-24-24
Two Wedges: Each 12” High
x 12” Base x 24” Length
Double Side-Lying Wedges are covered
with an incontinent proof, antibacterial,
anti-fungal, self-deodorizing, and stainresistant material.
Code #
Description
1031-24-24
Two Wedges: Each 12” High x 12” Base x 24” Length
1031-28-28
Two Wedges: Each 12” High x 12” Base x 28” Length
Price
For sizes not listed above, call JDM for a price quote. We will manufacture to your
specifications.
Page 114
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Bed Bolsters
Bed Bolsters are designed to prevent
arms and legs from being caught between the mattress and rail. They also
prevent the patient from rolling off the
bed when side rails aren’t being used.
The bolsters are secured under the
mattress with a nylon strap and buckle.
Code #
Description
1034-8-8
Bed Bolster
Price
8” High x 8” Deep x 34” Long
For a Bed Wedge with Special Dimensions, call JDM for a price quote.
Page 115
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Full-Length Bed Wedges
Example: 1029
Example: 1030
Single Full-Length Bed Wedge
Set of Full-Length Bed Wedges
Full Length Bed Wedges are often used to help prevent residents from harming themselves
on the bed rails, or to inhibit their falling out of bed. They may be ordered as a single wedge or
as a set. These wedges are covered with an incontinent-proof, antibacterial, anti-fungal, selfdeodorizing, stain-resistant material. The wedges are made with High-resiliency polyurethane,
which is expected to maintain its cushioning properties for 8 - 10 years under everyday usage.
Code #
1029
1030
Description
Price
Single Full-Length Bed Wedge
8” High x 8” Deep x 72” Long
Set of Full-Length Bed Wedges
1
Each: 8” High x 8” Deep x 72” Long
For a Bed Wedge with Special Dimensions, call JDM for a price quote.
Page 116
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Mattress Cover With Perimeter Bolsters
Example: 900-BRB
Slip-On Cover with Four Perimeter Bolsters (4” x 4” x 32 1/2” Each)
The Mattress Cover with Bolsters slips over the existing mattress. The fabric is an
incontinent-proof, anti-bacterial, anti-fungal, self-deodorizing, stain-resistant material.
The four Perimeter Bolsters are sewn into the mattress cover. Each bolster measures
4 inches by 4 inches by 32 1/2 inches each. The patient may enter and exit the bed
through the mid-section openings.
Code #
Description
900-BRB
Mattress Cover with Bolsters
(4 Perimeter Bolsters 4” x 4” x 32 1/2” Each)
Page 117
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Covered Bed Rail Pads
Bed Rail Pads are used to prevent
residents from harming themselves on
the bed rails.
The pads are made with one-inch thick
HR polyurethane foam and are covered
with medical-grad fabric. The pads are
secured to the bed rails by Velcro strips.
Bed Rail Pads may be ordered either
single sided or double sided. The
double-sided pads are for those
extremely agitated residents.
Example: 1001
(Single-Sided Pads)
Code #
Description
1000
Set of Double-Sided Bed Rail Pads
1001
Single-Sided Bed Rail Pad
Page 118
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Bed Rail Bolsters
Many residents are subjected to
bruising while in the bed by hitting
the all-metal side railing found on
most hospital beds.
Bed Rail Bolsters fit over each
individual rail and protect the
resident.
Example: 2460 (Displayed on Top Rail)
Example: 2430 (Two are Displayed
on Bottom Rail)
The fabric is easy to clean and soft
to the resident’s skin. Because each
rail is independently wrapped, air can
pass through to the bed area and the
resident may see beyond the bed
sides.
Code #
Description
Price
(Each)
2430-BRB
Bed Rail Bolster 30” Long & 4” Diameter
2460-BRB
Bed Rail Bolster 60” Long & 4” Diameter
To order Bed Rail Bolsters in sizes other than those listed, call JDM for a price quote.
Page 119
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Cropped Visco Mattress Topper
with Incontinent, Washable Cover to Fit Hospital Mattress
Example: 901-TWIN-V (3 x 36 x 80)
The Cropped Visco Mattress Topper redistributes pressure while progressively conforming to the body’s shape and weight. It
absorbs shock and dampens vibration. The
topper is manufactured with a “lower” firmness to increase body conformance and to
distribute weight (pressure) more effectively.
The cover is a cast-coated polyurethane
polyester fabric with stretch for healthcare
applications. This product is designed for
applications where a flexible cover fabric can
help reduce interface pressure, and antimicrobial performance, which provides for benefit of infection control. It covers the cropped
topper and mattress completely.
All JDM Mattress Topper covers come with
water proof zippers and are Incontinent
Proof, Anti-Bacterial, Anti-fungal, and Flame
Retardant. Washing Instructions included.
Code #
901-TWIN-V
Description
Visco Mattress Topper with Cover
(3” x 36” x 80”)
Page 120
Price
2
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Hip Abductors
Hip abductors are made for
supine positioning and are
secured with leg straps.
Each abductor is covered with
an incontinent-proof, antibacterial, anti-fungal, self-deodorizing, stain-resistant material.
JDM does not customize this
Example 612
particular device.
25” L x 16” W x 7” H
Code
Description
610
Hip Abductor (17” L x 22” W x 7” H)
611
612
Page 121
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Supine Heel Elevator
The Supine Heel Elevator is
designed to support the lower
extremities, suspend (float)
the heels and prevent
hyper-extension by
supporting the knees.
Example 1130
3” x 30” W x 20” D
Code
Description
1130
Supine Heel Elevator (3” x 30” W x 20” D)
1140
Supine Heel Elevator (4” x 30” W x 20” D)
Page 122
Price
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Head & Foot Board Fillers
Before Gap Filler
Gap
JDM’s Head & Foot Board Gap Fillers
are designed to eliminate gaps
between the mattress and the head
or foot board, thereby preventing bed
entrapment at F.D.A. zone 7. These
Gap Fillers attach to the bed’s head
or foot board with self-adhesive,
After Gap Filler
industrial-strength Velcro. They are
covered with Staph-Check Fabric, which
is an anti-bacterial, hypo-allergenic,
incontinent proof, flame resistant material.
The Head & Foot Board Gap Fillers may
be purchased in 2-inch, 4-inch or 6-inch
thickness.
Item #
1040
1042
1044
1046
1048
Description
Head & Foot Board Gap Filler 3 ½” x 6” x 36”
Head & Foot Board Gap Filler 2” x 6” x 36”
Head & Foot Board Gap Filler 4” x 6 ” x 36”
Page 123
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
NOTES: _____________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Page 124
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
CONTRACTURE
RELIEF
SECTION
JDM manufactures several different types of upper and lower
extremity devices. They are all resident specific. Since they are
resident specific, we ask you, the health care professional, to aid
us by accurately measuring each resident. This is very important:
No contracture device may be returned for a refund; however,
we realize mistakes are made. We will modify a device if, for some
reason, the measurements are slightly off. The cost of modifying the
device will be priced accordingly.
The following pages and diagrams are designed to assist you in
dealing with a multitude of lower and upper extremity contracture
problems. We realize that this is by no means the answer to all the
problems that will arise. If you can prepare a rough sketch and/or
talk to one of our customer services representatives about your
particular concerns and needs, JDM will manufacture almost
anything to help you and your resident.
Page 125
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Resident-Specific
Knee Wedge
All Knee Wedges are laminated with soft Visco
elastic for pressure redistribution. The wedges are
fully covered with medical-grade fabric and are
padded and secured at the top with sheepskin.
Smaller knee wedges are utilized most often when
one of the lower extremities is contracting at 90
degrees or greater. Please measure for a Knee
Wedge and provide JDM with the following
measurements:
Measurement Instructions for ResidentSpecific Knee Wedges:
(Please measure with resident in a supine position.)
Example 1301
Diagram of Legs
A._________” distance from behind knee to
top of mat or bed
B._________” distance from behind knee to
either heel or ankle
C._________” distance from either heel or
ankle to buttocks
LEG=________ (L) Left or (R) Right Leg
A
Diagram of Wedge
B
C
70º
80º
90º 100º
110º
Code #
1301
Description
Price
Resident Specific Knee Wedge
A. _________”
B. _________”
C. _________”
LEG= _______(L) Left or (R)Right
In these applications, due to tightness of
contracture, we cut off 1” of the “A”
dimension to allow for air passage behind
the knee. If this is not required, please advise.
Page 126
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Knee Wedge for Extended Range
and Heel Decub
Often the resident’s leg will extend out, but the heel
has decubs. It may be necessary to float the heel.
If the resident has heel decub(s) and will range out,
please measure as follows:
A._______” Measure from behind the knee to the
mat or bed with resident at a comfortable extension.
B._______” Measure from behind the knee to the
area above the heel Decub, to elevate
the
foot.
C._______” Measure from buttocks to area above
heel, chosen in the B measurement
in diagram.
D._______” While holding the heel off the bed or mat, measure height from heel to bed. This
will be the thickness of foam needed to “float” the
wound.
Example 1305
LEG=_____________ (L) Left or (R) Right Leg
Diagram of Knee Wedge
for Extended Range & Decub
Diagram of Legs
0º
10º
A
B
C
20º
30º
40º
50º
60º
90º
Code #
Description
Price
1305
Resident Specific
Lower Extremity Wedge
Page 127
A. __________”
B. __________”
C. __________”
D. __________”
LEG =_______= (L) or (R)
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Knee Wedge for Extended
Range, Heel Decub, and
Foot Drop
Often the resident will range out, but it may be
necessary to float the heel and support the foot
to prevent foot drop. This device allows you to
support the foot at various angles by adjusting
the straps accordingly, thereby inhibiting foot
drop.
Code #
1310
Description
Price
Resident-Specific Extended
Lower Extremity Wedge
with Foot Support
MEASUREMENT INSTRUCTIONS:
A._______” Measure from behind the knee to the
mat bed with resident at a comfortable extension.
B._______” Measure from behind the knee to the
area above the heel Decub, to elevate the foot.
Example 1310
C._______” Measure from buttocks to area above
heel, chosen in the B measurement in diagram.
D._______” While holding the heel off the bed or
mat, measure height from heel to bed. This will be
the thickness of foam needed to “float” the wound.
Diagram of Lower Extremity
Wedge with Foot Support
LEG=________ (L) Left or (R) Right Leg)
Diagram of Legs
0º
10º
B
A
20º
30º
C
40º
50º
60º
90º
Page 128
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Resident-Specific
Knee Flexion Inhibitor
The Resident-Specific Knee Flexion
Inhibitor is a one-piece device which
abducts, while also inhibiting further
knee flexion.
JDM requires the following measurements for lower extremities:
A._________distance from behind knee to
top of mat or bed.
B._________distance from behind knee to
either heel or ankle.
C._________distance from either heel or
ankle to buttocks.
Example 1320
The degrees of flexion must be the same
bilaterally.
Code #
1320
Description
Price
Resident-Specific Knee Flexion Inhibitor
Please provide measurements as specified above:
(Measurements must be same for both legs.)
A. ______”
B. ______”
C. ______”
Abduction = The amount of separation needed at the knees __________”
(2” or 3” are the standard measurements for abduction)
NOTE: The degrees of flexion must be the same bilaterally.
Page 129
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Contrac-Tree
A Contrac-Tree consists of three separate pieces
attached by Velcro and nylon felt. The ContracTree is extremely helpful at inhibiting lower extremity contractures, particularly if each lower
extremity has more than plus or minus 5 degrees
difference. Examples of appropriate situations for
a Contrac-Tree are:
1. The left lower extremity will range to almost full
extension, but has heel decub and is adducting
hard towards the right lower extremity.
2. The right lower extremity has a range of 90
degrees flexion and you want to prevent further
contracture.
3. The resident can comfortably be abducted the
desired inches (2, 3 or 4 Inches) between knees.
Example 1300-2
Measurement Instructions:
(Measure with resident in a supine position.)
A. Distance (inches) from behind knee to top of mat or bed
B. Distance (inches) from behind knee to either heel or ankle
C. Distance (inches) from either heel or ankle to buttocks
Note: Measurement “D” below applies only if contracture is
less than 90º flexion (i.e., more than 90 degrees extending).
D. While holding the heel off the bed or mat, Measure height
(inches) from heel to bed. This will be the thickness
of foam needed to “float” the wound.
Please Indicate Measurements for each extremity before
ordering:
Left Lower Extremity
A. ______”
B. ______”
C. ______”
*D. ______”
Right Lower Extremity
A. ______”
B. ______”
C. ______”
*D. ______”
*(See note for D in the measuring instructions above.)
Abduction: _______ The amount of separation needed at the
knees (The standards are 2 inches and 3 inches. 4 inches may
be ordered as well. Please see price list below.)
Code #
Description
Price
All Contrac-Trees require measurements. Please Indicate Measurements for each extremity before ordering:
1300-2
1300-3
1300-4
Contrac-Tree for 2-inch abduction (the amount of separation needed at the knees)
For other sizes of abduction, please contact JDM.
Page 130
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Resident-Specific
Arm Flexion Inhibitor
Arm Flexion Inhibitors (A.F.I.’s) are
devices which cushion the upper
extremity and utilize the “return memory”
of High-Resilient Polyurethane Foam
to inhibit any further contractures.
The A.F.I. is always covered in an anti-bacterial/
anti-fungal material, but for added comfort you
may request the addition of sheep skin lining.
Please provide JDM with the following
information for each A.F.I.:
Arm = __________ (L) Left or (R) Right Arm)
Degrees of Flexion = ________º
(Note: Standard is 70 degrees, Right or
Left Arm.)
Example 1210-R
Code #
Description
Flexion
1210-L
Left Arm Flexion Inhibitor
________º
1210-R
Right Arm Flexion Inhibitor
________º
Price
Note: If you would like sheepskin lining added to the Arm Flexion Inhibitors,
please make this request along with your order.
Page 131
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
NOTES: _____________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Page 132
JDM
Phone 1-800-994-4043
Fax 1-850-995-4116
Medical, Inc.
Geri Chair Kit
Example: 800-SYS
For those residents with lateral motion problems,
minor leg contractures, sliding problems, etc., JDM
recommends the Geri Chair System. The System
aligns the resident in the center of the chair,
supports the head, prevents climbing out over
the sides, keeps the hips to the rear, and extends
slightly contracted legs.
The Geri Chair System (pictured on the left) is
equipped with the following devices:
1. Torso Support with Lumbar Roll
2. Torso Head Support
3. Lateral Supports
4. Geri Wedge with Ischial Step
5. Abducted Knee Lift
You may choose the appropriate Torso Support,
Head Support, Lateral Support, and Wedge from
our stock items, or you can order any of the above
devices to be resident specific, with the exception
of the Abducted Knee Lift. For Resident-Specific
Geri Chair Systems, there will be an additional
charge.
Code #
Description
Price
800-SYS
Geri Chair System (Includes the Following):
#800 Torso Support with Lumbar Roll
#804 Head Support
#803 Set of Lateral Supports
#1321820-AS-I-T Geri Wedge with Ischial Step
#812 Abducted Knee Lift (Large or Small)
Note: If you require a different size or type of Geri wedge other than the one listed above
(or if you require any of the other devices listed above to be resident specific, with the
exception of the abducted knee lift), please inform JDM of your specific request(s).
Page 133
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
HTR Conversion Kit
HTR Conversion Kits are designed to
enhance and assist the HTR Chairs many
features. Basically this kit makes the HTR chair
less institutional looking and establishes more
pressure redistribution properties.
The HTR Kit (pictured on the left) is equipped
with the following devices:
1. 1-Inch Visco Pad
2. Customized Rectangular Bolsters
3. Winged Head Support
4. Leg Bolsters
5. Solid-Back Foot Support 2” x 21.5”W x 19”H
The kit may be ordered as a whole kit, or by
individual pieces if desired.
Code #
Description
HTR KIT
HTR Conversion Kit (Includes the Following):
1-Inch Visco Pad
Customized Rectangular Bolsters
Winged Head Support
Leg Bolsters
Solid-Back Foot Support 2” x 21.5”W x 19”H
Page 134
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Reclining Back Wheelchair Kit
The Reclining Back Wheelchair System
takes a Reclining Back Wheelchair and converts it into one of the most comfortable seating/positioning systems around. This is an excellent replacement for Geri chairs. It supports
laterally, cushions and protects. The foot boxes
swing away for easier patient transfer. Also the
patient may hand propel if capable.
The Reclining Back System (pictured on the
left) is equipped with the following devices:
1. 3” x 18” x 33” Pressure Redistributing
2. 4”-2” x 18” x 16” Ischial Step Wedge
4. Pair of Huggie Lateral Supports
5. Pair of 4” x 12” Arm Bolsters
6. Flexible Calf Support
7. Foot Boxes for Left & Right Feet
Kit Placed in an Invacare 9000XI
The kit may be ordered as a whole, or by
Code #
302-RCL BACK-SYS
Description
Reclining Back System (Includes the Following):
302-R-V (3x18x33 Pressure Redistributing Pad
#1421816-AH-AS-I-V (4”-2”x18”x16” AH Ischial Step Wedge)
#302 (Winged Head Support)
#302-LAT (Pair of Huggie Lateral Supports)
#2412-WCA (Pair of 4”x12” Wheelchair Arm Bolsters)
#403 (Flexible Calf Support)
#420-L&R (Flip-Away Foot Boxes for Left & Right Feet)
Page 135
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Broda Kit
The Broda Kit is a system that cushions,
bolsters and supports the patient in a Broda
wheelchair.
The Broda Kit (pictured on the left) is
1. Custom Cushion 3” x 20” x 18”
with Anti-Skid and Visco
2. Custom Back 3” x 20” x 33” with
Huggie Laterals
4. Wheelchair Arm Bolsters 5” x 16”
The kit may be ordered as a whole, or by
Code #
Broda Kit
Description
Broda Kit (Includes the Following):
Custom Cushion 3” x 20” x 18”, AS, V
Custom Back 3” x 20” x 33” with Huggie Laterals
#302 (Winged Head Support)
#2516-WCA-PR 5” x 16” W/C Arm Bolsters
Page 136
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Hemi Height Kit
The Hemi Height Kit is designed to take a
Hemi or Super Hemi height wheelchair and
convert it into an excellent positioning and
seating device that allows “foot propellers” to
retain their mobility. It supports laterally with
adjustable supports. Cushions and bolsters
protect the individual from skin tears. The
head support allows the resident to rest comfortably without neck strain. The back may be
reclined and “fixed” up to 30°.
The Hemi Height Kit (pictured on the left) is
1. Coccyx Scoop/Medial Thigh Separator
Cushion
2. Extended Back Support
with Adjustable Laterals
4. Wheelchair Arm Bolsters
5. Wheelchair Leg Bolsters
Code #
Hemi Height Kit
Description
Hemi Height Kit (Includes the Following):
1) #1421816-AH-AS-CS-M-V
(Coccyx Scoop/Medial Thigh Separator Cushion
4”-2”x18”x16”)
2) Extended Back Support System 2” x 16”W x 33”H
With Adjustable Laterals
3) #302 (Winged Head Support)
4) #2416-WCA (pr) 4” x16” W/C Arm Bolsters
5) #246-WCL (pr) 5” x 16” W/C Leg Bolsters
Page 137
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
Gait Belts
Code #
Length
Material
Buckle
161154......................54”....................Natural Cotton....................Metal
161254......................54”....................Natural Cotton....................Plastic
161260......................60”....................Natural Cotton....................Plastic
162160......................60”....................Pastel Cotton .....................Metal
162260......................60”....................Pastel Cotton......................Plastic
163160......................60”....................R, W & B Cotton.................Metal
163260......................60”....................R, W & B Cotton.................Plastic
164160......................60”....................Blue Polypro.......................Metal
164172......................72”....................Blue Polypro.......................Metal
164260......................60”....................Blue Polypro.......................Plastic
165160......................60”....................Rainbow Polypro................Metal
165260......................60”....................Rainbow Polypro................Plastic
Page 138
Price
Phone 1-800-994-4043
JDM
Fax 1-850-995-4116
Medical, Inc.
BILL TO: ________________________________
SHIP TO: _______________________________
Facility: _________________________________
Mailing Address: __________________________
City: _______________ State:_____Zip:________
Phone: ________________ Fax:______________
Contact: _________________________________
Department: ______________________________
Attention: _______________________________
Department: _____________________________
Facility: _________________________________
Street Address: ___________________________
City: _______________ State:_____ Zip:_______
Phone: _______________ Fax:_______________
ADDRESS: JDM Medical, Inc.
4372 Floridatown Rd.
Pace, FL 32571
FAX: 1-850-995-4116
E-MAIL: [email protected]
WE ACCEPT VISA AND MASTER CARD
PRODUCT NUMBER
PRODUCT DESCRIPTION
QTY
PRICE EA.
TOTAL
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________
Page 139

2016 JDM MEDICAL CATALOG

Transcription

Similar documents

www.easypack.net

here - Aerofilm Systems BV

Sure Gel MSDS

Order Form

Page 1 > top performance e v e n ts 18 The fast and furious drifters

cushions - W.Schillig

Antiquing Gel Instructions

Ceramalite - Plantercraft

Tail bone pain: a case report

Grafting 101