DS275-18V

DS275-18V
DuraSpin screwdriver
DuraSpin screwdriver
Technical specifications
Dimensions (LxWxH)
425x96x279 mm
Net weight
2,9 kg
Shots per charge
900
Recharge time 100%
60 minutes
Battery type
Li-Ion
Battery voltage
18 V
Rotations per minute
(RPM)
3000 RPM
Fastener specification
Applications
For drywallers and remodelers,
DuraSpin is the ideal tool for drywall (to
wood or steel studs), floor sheathing,
decking, underlayment, cement board
and fencing
25-75 mm
3,5 mm
Features & Benefits
• 3000 RPM high-torque motor drives screws
without bogging down
• Slide out 18 volt battery provides the optimum
balance of power weight and run-time across the
full range of screws
• Patented clutch design means long-lasting
durability
• Easy depth-of-screw drive adjustment regulates
the precise amount of countersink
• One-hour charger and extra battery ensures a
backup battery with a full charge
• Reverse switch to back out driven screws
• Easy bit change - from Phillips to square
• Belt hook - DuraSpin goes where you go
• Wide range of collated screws to speed production
Description
Art. Nr.
EAN code
DS275-18V, EU DuraSpin Screwdriver
2P2001N
0741474306297
Verpa Senco B.V. | Pascallaan 88 | 8218NJ Lelystad | The Netherlands | +31 (0) 320 295 575 | www.senco-emea.com
DS275-18V
fasteners
Description
Finish
Art. Nr.
Drywall to heavy steel screw clear zinc 3,5x35mm
35Q35MC
Drywall to heavy steel screw clear zinc 3,5x40mm
35Q45MC
Drywall to heavy steel screw clear zinc 3,5x25mm
35Q25MC-5
Drywall to heavy steel screw clear zinc 3,5x35mm
35Q35MC-5
Verpa Senco B.V. | Pascallaan 88 | 8218NJ Lelystad | The Netherlands | +31 (0) 320 295 575 | www.senco-emea.com