a new dimension: DYCS Brieda Cabins

Transcription

a new dimension: DYCS Brieda Cabins
Welcome
to a new dimension:
DYCS Brieda Cabins
A new generation
of ergonomically-designed
Crane Cab Operator
interface devices
This is the control station which provides
an effective scientifically-tested answer
to the persistent crane operator lower
back stress and pain.
With the new and innovative function
of the joystick, the forearm is completely
supported.
The Brieda Dynamic Project is
in accordance with the European
Standard: EN 1005-3/4/5
• Human Physical Performance
• Risk assessment for repetitive handling
high frequency
• Evaluation of work postures
and movements
The OCRA Index Metod
• Occupational Risk Assessment on
the overload of the upper limbs
• Method also used in the International
Standards ISO 11228-3
4
5
Electric Adjustable Boxes
The universal floor attachment point
makes installing or retrofitting
the Brieda DYCS possible in every type
of operators cab.
The adjustment of the control boxes
is performed by an electric device
for all the required directions.
The DYCS utilizes an extremely strong
structure with a shock-absorbing
system, tested for over 5000 hours
under stress conditions.
6
7
Highly ergonomic-designed
push buttons side panel
with electric adjustable monitor
support
This design reduces overall stress,
including, as a consequence, reduction
of the lower back lumbar load.
Lumbar stress has always been one
of the main causes of strain,
loss of productivity and development
of functional muscular disorders
associated with crane operation.
Now this problem has finally been
properly addressed.
Brieda Smart Bar
Modular boxes for spreader
lighting and analogic indicator
8
• Roof gutter for water draingage
• Split type air conditioner
• Shock absorbing device
• Tip-up seat
• Smart Bar light box
• Brieda adjustable touch screen support
• Brieda DYNAMIC control station
9
The joystick is activated with the simple
use of the fingers.
The highly ergonomic position of all
the controls enables the crane operator
to monitor the work in the best possible
way, considerably contributing to the
overall performance and productivity.
It will soon be possible to record
with a memory card the work position
of various operators.
10
11
LSCT
La Spezia
Container Terminal
Italy
The “Dynamic Project Team Brieda”,
in cooperation with the Biomedical
Technology Department of the
University of Milan and the EPM
(Research Unit-Ergonomics of the body
Posture and Movement)
have developed the biomechanical studies
of the operator on the control station,
taking measurements with sensors,
positioned on the muscles under stress,
during the various work operations.
This has led to a new design of the various
controls and supports, reducing over 60%
of the muscular stress, in particular in
the lumbar area.
Less fatigue and stress provide better
working efficiency and accuracy.
The reduction of working stress and
operator comfort have been studied
and documented by a special task force
of the Brieda Cabins company, combining
technical measurements, medical reports
and live footage of actual crane operations
to provide the most comprehensive study
of crane operator stress ever attempted.
12
Analyzing method.
We have used the OCRA Index Method
to evaluate the risk to contract muscle-tendon
pathologies with the innovative use
of the joystick and push buttons
Evaluating our system with the electromyography
by positioning some electrodes on the zones
interested by our research, has enabled us
to scientifically investigate the muscular
contractions and evaluate the stresses imposed
by various working positions
Results assessed by comparing the traditional
working system of the operators with the DYCS
Brieda system.
The diagrams show both static and dynamic
positions.The data here shown are relevant
to the lumbar area, but in our medical report,
we have charts for each zone concerned
13
PTP
Malaysia
Port of Tanjung Pelepas
The 18th biggest port in the world
This design reduces overall stress,
including, as a consequence, reduction
of the lower back lumbar load.
Lumbar stress has always been one
of the main causes of strain,
loss of productivity and development
of functional muscular disorders
associated with crane operation.
Now this problem has finally been
properly addressed.
15
Dynamic 07
Brieda Seat SB4
Technical features:
Control Station according
to EN 1005-3/4/5
• Versatile design accommodating
a variety of operator work positions
in relation to adjustable seat
and console positions
• Universal cab floor attachment point
for all cab types
• Rotating Control Station with sturdy
manual locking device
• Feed 24VCC-20A
• Control station with electric height
adjustment using industrial-grade
linear actuators
• Innovative high-tech gas shock
absorbing system in the control
station base
• Electric linear actuator console
adjustments for height, tilt and
horizontal forwards/backwards
movement
• No. 2 Joysticks wired and working
• Push buttons
• Wiring and terminal board
in the consoles of the joysticks
and push button
• Lateral appendix for the right
console with push buttons and wiring
till terminal board in the box.
16
Seat SB4
280
280
80
80
500
310
200
• Ergonomically-designed, heavy-duty
seat for optimum, various-size operator
comfort with:
• Seat forward/backward adjustment
• Headrest height and tilt adjustment
• Tilting backrest for operator relaxation
• Seat cushion designed for optimal
blood circulation in thigh zone
• Lumbar support
• Safety shoulder straps and seat belt
160
Floor Level
250
60
345
1120
Brieda Control Station
Type Dynamic 07
DWG 27.140.6 / A
250
280
550
Floor Fixing
ARRANGEMENT
M10
660
in.R
Rm
220
17
140
280
280
( BASE )
270
0
26
220
560
90
550
Side Console
OPTIONS
BD330
LayOut
Adjustable support
for touch screen
Main side panel
Control station
Dynamic 07
Modular
Smart bar
18
BD110
BD220
Asjustable support
for touch screen
Support type:
Brieda Supp003
Adjustable auxiliary
side panel
Fixed main
side panel
Fixed
man side panel
Control station
Dynamic 07
Smart bar
Smart bar
Control station
Dynamic 07
19
Brieda Cabins
di Rino Brieda e figlio Srl
Via del Laghetto 21
33080 Porcia / Pn / Italy
Tel. +39 0434 921071
Fax +39 0434 922758
e-mail: [email protected]
http: //www.briedacabins.com
rAffin / Stampa DTG - BRDDYCS 01/2012
We are just entering
our 40th year of activity
with same design
innovation attitude,
certain that this way
we can really help
our customers success