leavitt training - Leavitt Machinery

Transcription

NEED A LIFT?
LEAVITT TRAINING
STACK IT
1-866-LEAVITT
| REACH IT
|
| LIFT IT
www.leavittmachinery.com
TABLE OF CONTENTS
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operator Training
Counterbalanced/Vertical Mast Forklift (Class 1,4,5) Operator Training . . . . . . . . 4
Aerial Work Platform Operator Training . . . . . . . . . . . . . . . . . . . . . . . . . 5
Telehandler/Variable Reach Forklift (Class 7) Operator Training . . . . . . . . . . . . 6
Skid Steer Loader Operator Training . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Narrow Aisle Operator Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Industrial/Commercial Fall Protection Program . . . . . . . . . . . . . . . . . . . . . 9
Fall Protection - OSSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Fall Protection - Non-OSSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Truck Mounted Crane Operator Training . . . . . . . . . . . . . . . . . . . . . . . 12
Overhead Crane Operator Training . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Practical Rigging Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Wheel Loader/Front-end Loader Operator Training . . . . . . . . . . . . . . . . . . 15
Backhoe Operator Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Excavator Operator Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
In-House Instructor Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
In-House Instructor Recertification Training . . . . . . . . . . . . . . . . . . . . . . 19
About us
New Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Used Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Online Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
21
21
22
22
23
Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Mention this ad for
10% OFF
when booking an operator training course with Leavitt
Machinery. *Coupon is valid for one
operator training seat, not vaild for initial booking.
Reference Code: FLY-OT-CATALOGUE
2
1-866-291-3322
NEED A LIFT?
LEAVITT TRAINING
Leave it to Leavitt Training to provide customized training solutions that help you:
• Establish a safety culture and protect your people
• Ensure quality control through Leavitt Training’s comprehensive course
curriculum
• Save time and increase operational efficiency
• Meet or exceed occupational health and safety requirements
We understand that each organization has unique training needs and offer a variety
of training solutions for any application including: open registration training at our
branches, private onsite training, online training and blended training options.
Technical equipment maintenance training, custom program development, safety
audit services and learning management system services are also available.
ONLINE TRAINING
We are excited to now offer over 50 industry leading online safety training courses
designed to help employees and supervisors to increase productivity and reduce
risks to employees and equipment.
As a special introductory offer we are offering 10% off one seat in an open
enrollment operator training course when you sign up for any two of our online
safety training courses.
3
COUNTERBALANCED/VERTICAL MAST FORKLIFT
CLASS 1, 4 & 5
Course Overview:
This training program is designed to provide vertical mast forklift operators with a
solid foundation in health and safety standards, preventative maintenance and proper
procedures for safe operation. The course consists of classroom theory with a written
component and practical, hands-on experience. Course content is delivered through a
PowerPoint presentation and interactive discussion, and reinforced through workbooks
and supplementary handouts.
The course curriculum covers:
•
•
•
•
•
•
•
•
•
•
•
•
Safety regulations & standards
Lift truck fundamentals
Principles of stability, balance & capacity
Preventative maintenance & procedures (pre-operational inspections)
General rules of the road
Job safety analysis
Safe load handling techniques
Proper start up & shut down protocol
Steering & control
Refueling gasoline, diesel & LP lift trucks
Charging/changing industrial batteries on electric powered trucks
Designations for powered industrial trucks
Location: Leavitt Machinery branch (open enrollment) or private on-site.
Duration: 1 day (8:00am to 4:00pm)
Note: Novice operator courses can be delivered in extended 1 day or 2 day course format.
Unless otherwise requested, evaluations will be completed on boom lift equipment.
Materials Provided: Workbook, supplementary handouts and wallet card certification
upon successful completion of this course.
To find out more regarding Leavitt’s open enrollment course locations, availability,
re-certification or if you are interested in becoming an in-house instructor for your
company please contact Leavitt Training today!
4
1-866-291-3322
NEED A LIFT?
AERIAL WORK PLATFORM OPERATOR TRAINING
ARTICULATED BOOM, STRAIGHT BOOM & SCISSOR LIFT
Course Overview:
This training program is designed to provide elevated work platform operators with a
solid foundation in health and safety standards, preventative maintenance and proper
and supplementary handouts. Practical training is conducted on boom type equipment
unless otherwise requested.
•
•
•
•
•
•
•
•
Aerial platform fundamentals
Hazard identification Manual & powered vertical aerial platforms
Machine stability & characteristics
Job safety analysis
Machine orientation & safe operation
• Proper start up & shut down protocol
• Steering & controls
• Operating envelope & range of motion
• Emergency controls
• Safe dismounting
Duration: 1 day (8:00am to 4:00pm)
Note: Novice operator courses can be delivered in extended 1 day or 2 day course
format.
To find out more regarding Leavitt’s open enrollment course locations, availability,
re-certification or if you are interested in becoming an in-house instructor for your
company please contact Leavitt Training today!
5
TELEHANDLER/VARIABLE REACH FORKLIFT
OPERATOR TRAINING
Course Overview:
CLASS 7
This training program is designed to provide telehandler/variable reach operators with
a solid foundation in health and safety standards, preventative maintenance and proper
•
•
•
•
•
•
•
•
•
•
•
Telehandler fundamentals
Field hazard identification
Job safety analysis
Safe operation
Principle of balance & stability
Operating on slopes
Safe load handling & techniques
Load charts
Duration: 1 day (8:00am to 4:00pm).
format.
6
1-866-291-3322
NEED A LIFT?
SKID STEER LOADER
OPERATOR TRAINING
Course Overview:
This training program is designed to provide skid steer loader operators with a solid
foundation in health and safety standards, preventative maintenance and proper
PowerPoint presentation and interactive discussion and reinforced through workbooks
•
•
•
•
•
•
•
•
•
•
Skid steer loader fundamentals
Hazard identification
Job safety analysis
Basic operation
Steering, maneuvering & control
Load handling
Installation & removal of attachments
Location: Leavitt Machinery branch (open enrollment) & private on-site.
format.
7
NARROW AISLE OPERATOR TRAINING
CLASS 2, 3, 4: REACH TRUCK, ORDER PICKER, WALKIE STACKER
Course Overview:
This training program is designed to provide narrow aisle warehouse equipment operators
with a solid foundation in health and safety standards, preventative maintenance and
proper procedures for safe operation. The course consists of classroom theory with
a written component and practical, hands-on experience. Course content is delivered
through a PowerPoint presentation and interactive discussion, and reinforced through
workbooks and supplementary handouts.
•
•
•
•
•
•
Fundamentals of warehouse products
Principles of stability, balance & capacity
General rules of the road
Battery charging & changing
Job safety analysis
To be trained on below applicable machine types:
•
•
•
•
Reach truck operation
Order picker operation
Electric motor hand truck operation
Designations for powered industrial trucks
Location: Private onsite training.
New open registration Narrow Aisle Reach Truck now available at the Coquitlam
training facility.
Duration: 1 day (8:00am to 4:00pm or can be customized to your needs).
format.
8
1-866-291-3322
NEED A LIFT?
INDUSTRIAL/COMMERCIAL FALL PROTECTION
PROGRAM – OSSA ACCREDITED
FALL PROTECTION GROUP
Course Overview:
This End User Fall Protection Program (#6116) is developed by Fall Protection Group
Inc., a leader in North American Fall Safety.
Fall Protection Group Inc. is an OSSA Accredited Fall Protection Training Provider and
provides end users with OSSA Accredited certification.
Leavitt Machinery’s Trainers are trained and certified by Fall Protection Group Inc. to
deliver, on Fall Protection Group’s behalf, this End User Fall Protection Program
This one day program includes theory, tools and knowledge of fall protection to safely
work at height. The course material is energetically delivered and includes hands-on
activities, video analysis, and focuses on student participation.
Course Features:
This program includes both theoretical and practical application and testing on the
following topics:
•
•
•
•
•
•
Fall accident statistics
Dynamics of falling
Fall protection planning
Clearance & free fall calculations
Equipment care and inspection Rescue principles
Course Administration:
The duration of the course is 8 hours and includes a mandatory written theory test
(English only). The certification is valid for 3 years from course date. Government
issued photo ID must be presented to the instructor.
9
NON-OSSA INDUSTRIAL/COMMERCIAL END-USER
FALL PROTECTION PROGRAM
Course Description:
The Industrial/Commercial End-User Fall Protection Program (#6117) has been created
by Fall Protection Group Inc., a leader in North American fall protection training. The
program is designed to address the fall safety needs for any industrial and commercial
worker working at any height, but who are not engaged in the Oil Sands sites. The
program was developed in accordance with the Alberta Construction Safety Association
(ACSA) and Alberta OH & S Part 9.
Learning Objectives:
The goal of this fall protection program is to ensure that recipients understand the use
of fall protection as it relates to the work you perform at height. Various fall protection
options exist; this course will identify which options best meet your needs, and give you
the tools and knowledge to work at height safely. The learning objectives of this program
are as follows:
•
•
•
•
•
•
To comprehend fall protection fundamentals and regulations
To understand methods of eliminating the fall hazard
To identify the components of personal travel restrain and fall arrest systems
To understand equipment specifications, limitations, care and inspection
To understand methods of proper planning when controlling fall hazards
To understand the need for rescue planning and preparedness
Course Structure:
following topics:
• Rescue principles
• Governing bodies & regulations
• Fall accident statistics
• Fall protection systems
• Dynamics of falling
• Fall arrest system components
• Fall protection planning
• Clearance & free fall calculations • Harness fitting
• Suspension trauma
• Anchor points
• Course summary
• Connectors
•
Equipment care & inspection
Course Duration: The duration of the Industrial/Commercial End-User Fall Protection
Program is 8 hours, including both theoretical and practical application and testing
dependant on the total number of participants in the course. The certification is valid
for 3 years from date of completion.
10
1-866-291-3322
NEED A LIFT?
BC END-USER FALL PROTECTION
FALL PROTECTION PROGRAM
Course Description:
This one day Industrial / Commercial End-User (#5115) program will allow you to
understand the proper use of fall protection, as it relates to what you do at height. It
covers fall protection practices, systems, equipment, and regulations specific to the
province of British Columbia.
Various fall protection options exist, this course will identify which options best meet
your needs, and give you the tools and knowledge to work safely at height.
The course material is energetically delivered over a full day, that includes hands-on
activities, and focuses on student participation. Course delivery is performed by one of
our highly qualified instructors.
Course Structure:
following topics:
•
•
•
•
•
•
•
•
•
•
•
•
Fall accident statistics
Governing bodies & regulations
Dynamics of falling
Fall protection systems
Fall protection planning
Fall arrest and restraint system components
Specialty solutions (including lifts and ladders)
Harness fitting (includes an optional practical suspension exercise)
Clearance & freefall calculations
Equipment care and inspection
Suspension trauma
Rescue awareness
Course Duration:
The duration of the 5115 BC End-User Fall Protection Program is 8 hours, including
both theoretical and practical application and testing dependant on the total number of
participants in the course. The certification is valid for 3 years from date of completion.
11
TRUCK MOUNTED CRANE
OPERATOR TRAINING
Course Overview:
This training program is designed to provide Folding Boom Truck Crane and Stiff
Boom Truck Crane operators with a solid foundation in health and safety standards,
preventative maintenance and proper procedures for safe operation. The course consists
of classroom theory with a written component and practical, hands-on experience.
Content delivery will focus on applicable designation and can be customized to help
maximize participant’s success with complying with initial crane assessments. Course
content is delivered through a PowerPoint presentation and interactive discussion, and
reinforced through workbooks and supplementary handouts.
Please Note: In BC we are able to provide training on cranes with boom lengths less
than 25 feet and capacities under 5 tonnes. In Alberta we are able to provide training on
cranes with capacities under 8 tonnes. This training seminar does not provide you with
BCACS or Fulford Harbour CraneSafe licensing.
•
•
•
•
•
•
•
Truck mounted articulated crane fundamentals
Principles of balance, stability & capacity
Safe operations (for applicable designation)
• Folding boom truck crane
• Stiff boom truck crane
Load control techniques
Rigging orientation
Location: On-site training only.
12
1-866-291-3322
NEED A LIFT?
OVERHEAD CRANE OPERATOR TRAINING
Course Overview:
This training program is designed to provide overhead crane operators with a solid
•
•
•
•
•
•
•
•
•
•
Overhead crane fundamentals & overview
Crane terminology
Crane movement & controls
Load control techniques
Brakes overview
Load hook up & handling
Crane start up & shut down
Rigging
Location: Private on-site training only.
format.
13
PRACTICAL RIGGING TRAINING
Course Overview:
This training program is designed to provide riggers with a solid foundation in health and
safety standards, preventative maintenance and proper procedures for safe operation.
The course consists of classroom theory with a written component and
practical, hands-on experience. Course content is delivered through a PowerPoint
presentation and interactive discussion, and reinforced through workbooks and
supplementary handouts.
This program can be conducted as “theory awareness” or as full training with practical
assessment included. Use of a compliant rigging gear (must pass inspection), hoist
and hoist operators are required for practical to be completed.
•
•
•
•
Hoisting/rigging fundamentals & principles
Hoisting/rigging hazard identification
Inspection & application of rigging hardware & slings
Location: Private branch or onsite training only. Not available in all locations.
format.
Materials Provided: Workbook, supplementary handouts and wallet card
certification upon successful completion of this course.
14
1-866-291-3322
NEED A LIFT?
WHEEL LOADER/FRONT-END LOADER
OPERATOR TRAINING
Course Overview:
This training program is designed to provide wheel loader operators with a solid
•
•
•
•
•
•
•
•
•
Loader fundamentals orientation
Job safety analysis
Machine stability
Steering & control
Safe load handling techniques
Location: On-site Training.
Note: Novice operator courses can be delivered in extended 1 day or 2 day course format.
15
BACKHOE OPERATOR TRAINING
Course Overview:
This training program is designed to provide backhoe operators with a solid
•
•
•
•
•
•
•
•
•
•
•
•
Backhoe fundamentals & controls
Preventative maintenance & procedures
Site & pre-operation inspections
Steering, maneuvers, backhoe techniques
Trenching & backhoe techniques
Machine positioning & control
Transporting & hauling securement standard
Proper loading procedures
format.
Materials Provided: Workbook, supplementary handouts and wallet card certification upon successful completion of this course.
16
1-866-291-3322
NEED A LIFT?
EXCAVATOR OPERATOR TRAINING
Course Overview:
This training program is designed to provide excavator operators with a solid foundation
in health and safety standards, preventative maintenance and proper procedures for
safe operation. The course consists of classroom theory with a written component
and practical, hands-on experience. Course content is delivered through a PowerPoint
presentation and interactive discussion, and reinforced through workbooks and
supplementary handouts.
•
•
•
•
•
Excavator fundamentals & controls
Preventative maintenance & procedures
Site & pre-operation inspections
Steering, maneuvers, excavating techniques
Trenching & excavation techniques
Machine positioning & control
Transporting & hauling securement standard
Proper loading procedures
17
IN-HOUSE INSTRUCTOR TRAINING
Course Overview:
This two day instructor training program is designed to provide aspiring in-house trainers
with the fundamentals to deliver an effective training program and ensure course
curriculum standards are adhered. Course content is delivered through PowerPoint,
interactive discussion and practice. Participants are provided with a safe learning
environment to practice content delivery and class management techniques to engage
end users and ensure learning objectives are being achieved. Instructor training is
reinforced through use of instructor guides and supplementary hand outs. Participants
are encouraged to purchase recommended multi-media and training supplies to guide
internal training.
Course Pre-requisite:
In-house instructors are required to successfully complete Day 1 Operator Training and
comply with program audit requirements, in which instructors will need to submit one
completed class file for in order to receive permanent certification.
Please contact the operator training division to find out more regarding audit
requirements and re-qualification process if applicable.
Day 2:
•
•
•
•
•
•
•
•
•
Training methodology & approach
Training requirements & due diligence
OH & S guidelines & regulations
Theory of learning & styles
Training environment aids & set up
Presentation tips for success
Leveraging multi media & training materials
Class presentation & practice
Evaluation techniques record management
Materials Provided: Workbook, instructor guide, supplementary handouts and wallet
card certification upon successful completion of the course.
18
1-866-291-3322
NEED A LIFT?
IN-HOUSE INSTRUCTOR RECERTIFICATION TRAINING
Course Overview:
This one day audit is designed to review a previously trained in-house instructor to
ensure their presentation and documentation skills continue to meet an acceptable
standard for jurisdictional requirements and to provide updates on program changes.
At the time of training, participants are required to:
•
•
•
Provide a sample documentation of a course file completed within their certification
period
Lead a pre-shift inspection for a piece of equipment in front of a live training group
Do a mock practical assessment on a live training group of varying skill levels and
experience
An email including the required homework and a checklist of required items for the
session is emailed at the time of registration.
Course Pre-requisite:
Prior successful completion of a Leavitt Machinery In-House Instructor training program.
Location: Leavitt Machinery branch (registered into any open registration equipment
class). Private and onsite options are available however the actual audit process used
may be customized from the description listed above.
Duration: 1 Day (8:00am-4:00pm)
Materials Provided: Operator workbook, operator supplementary handout, updated
instructor resource package and wallet card certification upon successful completion of
the course.
Please note that if you were originally certified as an in-house trainer for more than
one equipment type, updated copies of all prior instructor wallet card certifications will
be provided following the session however only the operator wallet card certification
for the testing equipment used on the day of the course will be provided. If you require
additional assessments for operator recertification training, please contact our office to
book testing times.
19
NEW EQUIPMENT
Leavitt Machinery is the authorized dealer for 21 industry leading equipment
manufacturers. It is our belief that this enables us to provide an unbiased perspective
on what equipment solution will suit your application best.
Our goal is to find you the right piece of equipment for your needs, every time. Our
solutions based sales approach means we can offer you options like long or short
term rentals, cash sales, leases and asset disposal.
With an in house financing team we are able to offer flexible payment programs.
This gives our customers the added security of knowing that they have the ability
to change the terms of their lease as the needs of their business change and grow.
Our fleet management programs assist your business in making educated, strategic
and economically responsible decisions regarding your equipment fleet. We work
with your company to achieve the lowest cost of ownership and maximum uptime
for your entire fleet. With cost control, data management, and utilization reporting
we take care of the details, while you focus on what you do best, growing your
business.
Leavitt Machinery is an authorized dealer for the following brands:
20
1-866-291-3322
NEED A LIFT?
USED EQUIPMENT
With one of the largest used equipment inventories and a number of secured holding
yards across North America, we can offer our customers equipment solutions that
don’t include outrageous shipping costs.
Specializing in forklifts, boom lifts, telehandlers and cranes, our skilled sales staff
offer competitive quotes within minutes of your request, while our in-house financing
team provide you with flexible finance solutions.
We understand the significance of your investment. This is why we offer an industry
leading 30 day money back guarantee on every piece of equipment we sell. We
protect you and your investment, even after delivery.
Our consignment or asset disposal program gives you the option to sell your
underutilized assets to us maximizing your return without having to use an auction.
PARTS SUPPORT
Our parts department specializes in providing quality parts for nearly all makes and
models of equipment. We strive to be the one stop shop for the single forklift owner
and for companies running fleets of varied makes of equipment.
With one of the largest forklift and aerial equipment parts inventories in North America
we offer quality OEM or aftermarket replacement parts, we also offer remanufactured
and used options when available.
Each of our customers is assigned a dedicated parts professional who can provide
them with the consistent and reliable service they need in a time frame that works
for them. We understand how important it is to get your equipment up and running
as quickly as possible and we are able to offer next day shipping solutions for orders
placed within North America before 3pm.
SEATS
SAFETY
BRAKE PARTS
FORKS
LIFT CHAIN
MAST ROLLERS
ROCKWELL
ATTACHMENTS
TIRES
AXLE PARTS
CONTROLLERS
PALLET JACKS
21
SERVICE SUPPORT
With 150 service technicians on hand, Leavitt Machinery is able to offer in-shop
and mobile equipment service in more locations than any other dealership. Our
technicians have experience in virtually every sector and industry, allowing us to
service a number of different applications and markets.
With factory training from a wide variety of manufacturers and a massive pool of
shared technical knowledge, we work as a team to provide our customers with the
best service. Each technician in the shop or on the road has access to an internal
network of knowledge. From mechanics in the oil sands, to technicians working
in our Portland location, we ensure that our customers receive only the best in
knowledgeable service and repair.
RENTAL EQUIPMENT
Our rentals division has one of the largest and most diverse selections of
equipment available in the Pacific Northwest. We offer all late model rentals
with an average age of 1.5 years. Our team of factory trained technicians, parts
professionals and inside and outside sales reps are on hand to ensure that our
machines are functioning at peak performance day in and day out.
From high capacity, 360 degree rotational and telescopic forklifts with capacities
up to 70,000lbs to rough terrain and straight mast forklifts up to 100,000lbs, we
have you covered. We also carry a wide variety of aerial equipment from man lifts
with lifting heights ranging from 35ft to 180ft and electric or rough terrain scissor
lifts with lifting heights up to 50ft.
Our specialty equipment including generators, compressors, light towers and
pumps ensures that we keep your work site operational regardless of the weather
or your environment.
22
1-866-291-3322
NEED A LIFT?
ONLINE TRAINING COURSES
Sign up for any 2 online safety training courses and save 10% on our mobile
equipment operator courses. See our Online Training Catalogue for a full list of
available courses.
•
WHMIS/TDG
•
Hand and Power Tools for Construction
•
Bear Awareness
•
Scaffolding Safety: Construction
•
Fall Protection Awareness
•
Stand Up Forklifts
•
Confined Space Entry
•
Welding Safety
•
Hazard Assessment
•
Vehicle Mounted Aerial Lifts
•
Rigging and Slinging
•
And More!
•
Joint Health and Safety Committees
•
Ground Disturbance
•
Firefighting and Fire Extinguisher
•
Propane and Cylinder Handling
•
Chainsaw Safety Training
•
Traffic Control Person/Flagger
•
Electrical Safety Training
•
Hydraulic Safety Training
•
Lithium Battery Safety
•
GHS Awareness
•
Respitory Protection
•
Supervisor Skills
•
Acident Investigation
•
Aerial Lift & Scissor Lift
•
Air Brakes Study Guide
•
BC Safe Driving
•
Emergency Procedures
•
Chainsaw Safety
•
Counterbalanced Forklift
•
Effective Communication for Supervisors
•
Excavation Safety
•
Fire Safety
•
Safety Construction Orientation Training (SCSA SCOT)
Call us today at 1-866-291-3322 or visit
our website for more information www.
leavittmachinery.com
23
26 LOCATIONS TO SERVE YOU
BRITISH COLUMBIA
Coquitlam
51 Leeder Street
Coquitlam, BC V3K 3V5
Ph: (604) 527-7901
Coquitlam Training Center
Suite 200-98 Fawcett Road
Coquitlam, BC V3K 6V5
Ph: 1-866-291-3322
Kamloops
Prince George
1 - 452 Dene Drive
Kamloops, BC V2H 1P4
Ph: (250) 828-6177
Kelowna
101-864 McCurdy Place
Kelowna, BC V1X 8C8
Ph: (250) 762-8480
Kitimat
420 Enterprise Ave
Kitimat, BC V8C 2E2
Ph: (250) 632-7833
Kitimat Training Center
434 Enterprise Ave
Kitimat, BC V8C 2E2
Ph: 1-866-291-3322
9565 Rock Island Road
Prince George, BC V2N 5T4
Ph: (250) 562-3342
Penticton
#101 – 1750 Dartmouth
Penticton, BC V2A 4B9
Ph: (250) 493-4222
BRITISH COLUMBIA
ALBERTA
Prince Rupert
Kitimat
Prince George
Fort McMurray
SASKATCHEWAN
Grande Prairie
Edmonton
Prince Rupert
273 Skeena Drive
Port Edward, BC V0V 1G0
Ph: (250) 628-3678
Kamloops
Nanaimo Vernon
Kelowna
Victoria
Penticton
Vancouver
Sparwood
Sparwood
641 Douglas Fir Road,
Sparwood, BC V0B 2G0
Ph: (250) 425-0579
Red Deer
Calgary
Saskatoon
Mount Vernon
Regina
Tukwila Spokane
WASHINGTON
Tualatin
Langley
Vernon
Nanaimo
Victoria
24389 Fraser Highway
Langley, BC V2Z 2L3
Ph: (604) 607-4450
#100 – 2010 Boxwood
Nanaimo, BC V9S 5W7
Ph: (250) 740-2585
OREGON
6215 Hwy 97
Vernon, BC V1B 3R5
Ph: (250) 545-5740
495 Dupplin Place, Building B
Victoria, BC V8Z 1B8
Ph: (250) 385-5814
ALBERTA
Calgary
11330 – 70th Street, SE
Calgary, AB T2C 4Y3
Ph: (403) 723-7555
Edmonton
11015 – 186th Street
Edmonton, AB T5S 2V5
Ph: (780) 451-7200
Fort McMurray
Edmonton Training Center
18166-102 Ave NW
275 McAlpine Crescent
Fort McMurray, AB T9H 4Y4 Edmonton, AB T5S 1S7
Ph: 1-866-291-3322
Ph: (780) 790-9387
Grande Prairie
Red Deer
8614 112 Street
83 Queens Drive
Grande Prairie, AB T8V 5X4 Red Deer, AB T4P 0R8
Ph: (780) 513-6205
Ph: (403) 347-7978
SASKATCHEWAN
WASHINGTON
Saskatoon
Mount Vernon
Regina
Seattle
3028 Millar Ave
Saskatoon, SK S7K 5X9
Ph: (306) 978-3900
61 – 1909 Turvey Road
Regina, SK S4N 3A4
Ph: (306) 546-6100
OREGON
Portland
9585 SW Tualatin Sherwood
Tualatin, OR 97062
Ph: (503) 691-1430
Department Speciﬁc Toll Free Numbers:
New Equipment: 1-866-Leavitt
Operator Training: 1-866-291-3322
1-866-LEAVITT
Used Equipment: 1-877-850-6499
Parts Support: 1-877-772-2787
|
Unit #D-1117 Dale Lane
Mount Vernon, WA 98274
Ph: (360) 366-2225
17300 West Valley Hwy
Tukwila, WA 98188
Ph: (425) 251-0600
Spokane
3534 East Trent Avenue
Spokane, WA 99202
Ph: (509) 533-5600
Rentals: 1-888-346-7368
Service: 1-888-930-7620
FLY-OT-CATALOGUE-FEB 15

leavitt training - Leavitt Machinery

Transcription

Similar documents

OSH Circular 2015-04 (Hatch Lid Car Crush)

M-Line 4500

Vendmaster Brochure

States, Robert J.

BattleNet 360 - Delex Systems, Inc

a new dimension: DYCS Brieda Cabins

907283 - 5635-6635 SX-DX Turbo Skid Loaders Operator`s Manual.tif

the tellurometer mrd1 system

Customer story: Smart technology increases productivity

Manitex 1410JBT