User`s Guide - RoadTrucker

Transcription

User’s Guide
For Sales Information Please Contact
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
RoadTrucker Inc (www.RoadTrucker.com
8312 Sidbury Rd. Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
Trademarks
Rand McNally and IntelliRoute are registered trademarks and TND is a
trademark of Rand McNally.
NAVTEQ ON BOARD is a trademark of NAVTEQ.
The Trucker’s Friend and National Truck Stop Directory are registered
trademarks of TR Information Publishers.
Other products and companies mentioned herein may be trade-marks of
their respective owners.
© 2009-2010 Rand McNally
All rights reserved.
Rand McNally follows a continuous improvement process and reserves the
right to provide enhancements that may not be reflected in the pictures
and specifications in this manual.
The information contained herein may be changed at any time without
prior notification. This manual nor any parts thereof may not be
reproduced for any purpose whatsoever without the express written
consent of Rand McNally, Inc, nor transmitted in any form either
electronically or mechanically, including photocopying and recording. All
technical specifications, drawings, etc. are subject to copyright law.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide
ii
Table of Contents
Welcome
Basic Operations
Your IntelliRoute® TND™ 500......................................... 1
About GPS....................................................................... 2
Features . ................. ....................................................... 3
Customer Support .................. ........................................ 5
Start the IntelliRoute® TND™ 500 ................................ 17
The Main Menu ............................................................ 18
Using Keyboards ........................................................... 19
Basic Settings . .............................................................. 20
Select Driver Status .................................................... 20
Select a Keyboard Type .............................................. 20
Volume Settings . ....................................................... 21
Set Truck Information . ............................................... 21
Select Truck or Car Mode ........................................... 22
Set Truck Yard Time Zone . .......................................... 22
Set the Type of Route to Calculate ............................. 23
Set Warnings ............................................................. 23
Getting Started
What’s Included ............................................................... 7
Important Safety Information .......................................... 8
Navigation Safety . ....................................................... 8
Installation Safety ........................................................ 9
Device Safety ............................................................. 10
Battery Power Indicator . ............................................... 11
Charge the Battery ....................................................... 12
First Time Use ............................................................ 12
Charge with the Wall Charger ................................... 12
Charge with the USB Cable ....................................... 12
Charge with the Vehicle Charger ................................ 12
Install the Cradle and Mount ........................................ 13
Power the Device .......................................................... 14
Turn the Device On .................................................... 14
Turn the Device Off . .................................................. 14
Enter or Return from Standby (Sleep) Mode ............... 14
Reset the Device ........................................................ 15
Destinations
Ways to Search for Locations ........................................
Location Searches .........................................................
Destination Selection Window ...................................
Destination Auto-Complete .......................................
About City and Street Names . ...................................
Select a City . .............................................................
Find Addresses . ............................................................
Location Selection Window . ......................................
Search for an Address ................................................
Search Near a City Center ..........................................
Search For an Intersection ..........................................
25
26
26
27
28
29
30
30
31
32
33
iii
Point of Interest Searches . ............................................ 34
Points of Interest Selection Window ............................ 34
Points of Interest Category Window . ......................... 35
Types of Points of Interest (POIs) . .................................. 36
Select a Truck-Related Point of Interest . ..................... 37
Select and Filter Travel Center Amenities .................... 38
Select a Consumer Point of Interest ........................... 39
Find Points of Interest (POIs) . ........................................ 40
Search Near the Current Truck Location ..................... 40
Search In a City . ........................................................ 41
Search Along the Route ............................................. 42
Search Near the Destination . ..................................... 43
Search Near End of Day Location ............................... 44
Find a Location by Tapping on the Map . ....................... 45
Tap on the Map and Avoid the Location . ................... 45
Tap on the Map and Route to the Location ................ 46
Rate a Truck-Related Point of Interest ............................ 47
Manage Destinations .................................................... 48
Save a Location in the Address Book .......................... 48
Select a Location from the Address Book ................... 49
Create an Address Book Group .................................. 50
Select a Location From a Group ................................. 51
Select a Location from the History List . ...................... 52
Multi-Stop Routes
Create a Multiple Stop Route ........................................ 53
Add Locations to a Multi-Stop Route ............................ 54
Manage Routes ............................................................ 55
Optimize a Route ........................................................55
Remove a Stop from a Route ..................................... 56
Select and Run a Saved Route .................................... 57
Delete a Route ........................................................... 58
Maps
Destination Confirmation Windows .............................. 59
Address Confirmation Window .................................. 59
Consumer Point of Interest (POI)
Confirmation Window ............................................... 60
Truck-Related Point of Interest (POI)
Confirmation Window ............................................... 61
Address Book Confirmation Window ......................... 62
Multi-Point Route Confirmation Window ................... 63
Turn-by-Turn List ........................................................... 64
View the Turn-by-Turn List ......................................... 65
Route Map Window ..................................................... 66
Detour Around Part of the Route ................................67
Detour Around a Specific Roadway ............................ 68
Cancel a Route ..............................................................69
iv
Truck Tools
Truck Tools Window . ....................................................
Timers and Logs . ..........................................................
View Timers and Odometer Readings . .......................
View Driver Logs ........................................................
Calculate a Quick Route . ...........................................
View Rand McNally Motor Carriers Road
Atlas Emergency Information .....................................
Use the Calculator .....................................................
Use the Unit Converter ..............................................
Send a Message to Rand McNally .................................
Send a Message on Your Current Location .................
Send a Message on a Different Location ....................
Send a Message on a Location on the Map ................
TND Dock
71
72
72
73
74
75
76
77
78
78
79
80
Customize
Truck Information .........................................................
Set Truck Options . ........................................................
Device and Map Display Settings . .................................
Set Device and Map Display Options .............................
Routing Settings ...........................................................
Set Routing Options . ....................................................
Warning Settings ..........................................................
Set Warning Options ....................................................
81
81
82
83
84
84
85
85
Install TND Dock Software ............................................
Set Up to Use TND Dock ...............................................
Open the TND Dock Main Window . .............................
TND Dock Main Window ..............................................
IntelliRoute® TND™ 500 ..............................................
Check for IntelliRoute® TND™ 500 Software
Updates ........................................................................
View IntelliRoute® TND™ 500 Information . .................
Backup IntelliRoute® TND™ 500 Information ...............
Restore IntelliRoute® TND™ 500 Information ...............
View IntelliRoute® TND™ 500 Manual .........................
Sign Up for Road Construction Updates ........................
Tell Rand McNally . ........................................................
Go To Websites . ...........................................................
Rand McNally Consumer . .............................................
Rand McNally Commercial Transportation .....................
87
88
88
89
90
90
91
92
93
94
95
96
97
97
97
Index
v
Welcome
Your IntelliRoute® TND™ 500
1
1
Front
3
4
Turns the device On, Off, and used to enter/return from Standby mode.
2
2
7
Battery Power Indicator
Shows charging status.
6
9
SD Card Slot
Stores map data (in some devices).
5
Back
Traffic Antenna Socket
For future use.
4
6
Audio Output Socket
Connect to external speaker (not provided).
3
5
Power Key
Mini-USB Port
Connects to a power source (computer, car charger, or wall charger). Also
used with the TND Dock application.
7
Issues spoken road instructions and maneuvers.
8
8
Speaker
Reset Button
Restores factory settings and restarts the device.Note: Use this button only
when instructed to do so by Rand McNally Customer Support Personnel.
9
External GPS port
Used in cases where clear view of the sky is blocked by metal objects or
metalized windshields.
1
About GPS
The Global Positioning System (GPS) is a constellation of satellites that a GPS
receiver uses to calculate geographical positions. To determine a position, data
from at least three satellites is required. To determine altitude, the data from 4
or more satellites is required. Accuracy of the positioning varies from 10 feet
to several hundred feet, depending on vehicle placement and the surrounding
environment
Geographical terrain (such as mountains), man-made structures (such as
highway overpasses, bridges and tall buildings), as well as weather can interfere
with the GPS signal. For best GPS reception, position the IntelliRoute® TND™
500 and mount with a clear line of sight to the sky.
Some vehicles may have a limited view of the sky due to metal sun shields, or
a metallized windshield coating. If your unit does not appear to receive signals
well inside your vehicle but works well outside, contact Rand McNally for an
available external antennae.
Map data used by the IntelliRoute® TND™ 500 includes the geographical
coordinates for address locations and Points Of Interest (POIs). With GPS
reception, your device calculates a route to your selected location.
2
Features
Truck-Specific Routing
The IntelliRoute® TND™ 500 uses Rand McNally proprietary road information to
calculate the best route to your destination. Enter your truck information, such
as length, width, weight, height and the IntelliRoute® TND™ 500 calculates
a route that meets your needs. You can calculate routes for either the shortest
amount of time or the shortest distance. With additional routing settings, you
can specify the type of roadways (tollroads, ferries, etc) to allow in the route or
to avoid.
For more information, see:
• “Set Truck Information” on page21.
• “Set the Type of Route to Calculate” on page23.
• “Routing Settings” on page84.
Enhanced Spoken Directions
The IntelliRoute® TND™ 500 includes turn-by-turn directions with spoken
street names. You can also repeat an instruction by tapping a button.For more
information, see:
• “View the Turn-by-Turn List” on page65.
Road Construction Updates
With TND Dock, you can register to automatically receive regular updates on
highway construction across the US and Canada. Once installed, you receive
updates whenever you log onto TND Dock and connect to Rand McNally. For
more information, see:
• “Install TND Dock Software” on page87.
• “Sign Up for Road Construction Updates” on page95.
3
Timers and Logs
Record and monitor driving time and On/Off Duty time. Track odometer readings to better manage scheduled maintenance
• “Select Driver Status” on page20.
• “Timers and Logs” on page72.
Points of Interest (POIs)
IntelliRoute® TND™ 500 offers thousands of Trucker’s Friend National Truck
Stop Directory® Points of Interest, with dozens of amenity types including truck
stops, rest areas, and weigh stations. Also included are 6 million Rand McNally
and ‘yellow pages’ Consumer points of interest.
• “Types of Points of Interest (POIs)” on page36.
TND Dock
Rand McNally TND Dock, a PC application, lets you to update your device software electronically, receive free road construction updates, view the IntelliRoute® TND™ 500 User’s Guide, along with other useful functions.
• “TND Dock” on page87.
Amenity Ratings & Reviews
Read amenity reviews of Truck-related Points of Interest from fellow truckers and
record your own rating.
• “Rate a Truck-Related Point of Interest” on page47.
Vehicle Mode Flexibility
The IntelliRoute® TND™ 500 vehicle mode can be set to truck or car. When set
to Truck, routes are calculated according to the specific truck needs.
• “Select Truck or Car Mode” on page22.
4
Customer Support
Call Toll Free:
877-IGO4TND (Toll Free)
877-446-4863
Service Hours:
Monday through Friday, 8 a.m. to 7 p.m. CT
(except official holidays)
E-Mail:
[email protected]
5
Getting Started
What’s Included
Your IntelliRoute® TND™ 500 includes:
• IntelliRoute® TND™ 500 navigation device
• Mount and Cradle
• 12V Truck Charger with extended length cable
• Home Charger (120/240V)
• USB cable
• Extra Fuse
• Quick Start Guide
(800) 507-0482 / (910) 686-4281
7
Important Safety Information
Navigation Safety
Caution:
Use this navigation device at your own risk.
Caution:
Use this navigation device only when it is safe to do so.
Caution:
Look at the display only when it is safe to do so.
Caution:
Traffic regulations always have priority over any instructions from
the navigation system.
Caution:
Follow navigation system instructions only when local regulations
and road traffic allow you do so.
Caution:
Make sure that the mount is securely mounted and properly adjusted
before each trip.
Note:
If you do not understand the spoken instructions, or are unsure of what
to do next, refer to the Navigation map on your navigation device.
8
Installation Safety
Caution:
Make sure that the mount does not impair the driver’s driver’s visibility.
Caution:
Do not attach the mount within the airbag deployment zone.
Caution:
When installing the mount, make sure that it does not pose a risk in the event
of an accident.
Caution:
Do not run cables directly next to safety-relevant devices and power supplies.
Caution:
After installation, check all safety-relevant equipment in the car.
Caution:
Connect the wall charger to a 120V or 240V outlet only.
Caution:
Connect the vehicle charger to a 12V outlet only.
(800) 507-0482 / (910) 686-4281
9
Device Safety
Caution: Do not use sharp-edged objects on the device touch screen.
Caution: Protect the device from moisture. The device is not waterproof and is
not protected against water damage.
Caution: Protect the device from extreme temperatures. Operating
temperature for the device is between 32 degrees F to 120 degrees F.
Caution: When parking the vehicle for an extended time, to avoid battery
drain, hold down the power button for 10 seconds to power off the device. For
shorter periods of inactivity, see “Enter or Return from Standby (Sleep) Mode”
on page14.
Caution: Do not open the navigation device casing.
Caution: Do not attempt to replace the battery. For problems with the battery,
contact Rand McNally Customer Support.
Caution: Always follow local regulations when disposing of this device.
Caution: Do not expose the navigation device to extreme heat or cold.
Damage to the device may impair its function.
Note: Make sure that there are no kinks in the cable and that it will not be
damaged by any sharp objects.
Note: Use only a moist cloth to clean the navigation device.
Note: Do not pull the cable to unplug the unit.
The Indicator displays the status of the built-in battery:
10
Bright Red
Device is plugged in and the battery is charging.
Bright Green
Device is plugged in and the battery is fully charged.
Light Green
Device is in Standby Mode.
Charge the Battery
First Time Use
11
Charge with the Wall Charger
To maximize battery life, plug in the IntelliRoute® TND™ 500 for the first two
(2) hours of use. Use the:
• Home charger to power the device from wall outlet, or
• 12V vehicle charger to power the device from the battery, or
• USB cable to power the device from a computer.
Charge with the Wall Charger
1. Plug the mini-USB socket into the port on the side of the device.
2. Plug the wall charger into a wall socket.
Charge with the USB Cable
2. Plug the USB socket into a USB port on your computer.
On some computers, the computer may need be on to charge the device.
Charge with the Vehicle Charger
Charge with the USB Cable
Charge with the Vehicle Charger
2. Plug the vehicle charger into the vehicle power outlet or cigarette lighter.
The vehicle may need to be on for the device to charge.
Install the Cradle and Mount
Select an area with a line of sight to the sky and GPS satellites to ensure reliable
GPS information.
12
Note: Obey all local regulations governing the placement of the mount.
Note: Do not place the mount in an airbag deployment area.
1
Clean and dry the mounting area.
2
Remove the suction cup protective film.
3
Adjust the angle and secure the cradle to the mount using the thumbscrew.
4
Pull the suction cup lever up to release suction.
5
Place and hold the mount suction cup against the mounting surface.
6
Press the suction cup lever down until it snaps into place.
7
Angle the bottom of the device into the cradle and align the two slots on
the bottom of the device into the two projections on the cradle.
8
Press the top of the device towards the cradle until you hear two clicks
indicating the device is fully secured.
9
Plug the power cord into the device and the vehicle’s 12 volt power source.
10 Adjust
the navigation device so that it can be easily seen and does not block
the driver’s line of sight.
Power the Device
Note: To maximize battery life, plug in the IntelliRoute® TND™ 500 for the first
two (2) hours of use. See “First Time Use” on page12.
13
Power Key
Turn the Device On
• Press and hold the Power Key for two (2) seconds, then release.
(After 5-10 seconds, the Rand McNally splash screen displays as the device
powers on.)
Turn the Device Off
• Press and hold the Power Key for five (5) seconds, then release.
A message displays indicating that the device is powering off.
Enter or Return from Standby (Sleep) Mode
• Press and release the Power key.
Reset the Device
Resetting the device restores factory settings and restarts the device.
When you reset the device, your current route information is lost. Address Book
entries, trips, settings, ratings and messages to Rand McNally are not affected.
Note: Use this procedure only when instructed to do so by Rand McNally
Customer Support Personnel.
• Use a paper clip to press the reset button located on the back of the
device case
Reset Button
14
Basic Operations
Install TND Dock Window
Start the IntelliRoute® TND™ 500
1 Press and hold the device Power Key for two (2) seconds.
(Device powers on in 5 seconds.)
2 On first use and occasionally on subsequent use, the Install TND Dock
Window displays.
(Once TND Dock is installed, this window no longer displays.)
3 To install the TND Dock, tap Yes. See “Install TND Dock Software” on
page 89 for more information.
Warning and User Consent Window
4 To start the IntelliRoute® TND™ 500 without installing TND Dock, tap
No.
The Warning and User Consent Window displays.
5 Tap Accept.
The Main Menu displays.
To view a short tutorial on device use, tap Tutorial.
Main Menu
16
The Main Menu
Truck Mode
2
1
Car Mode
1 Status Icons
Icons shown in this area indicate device status.
3
6
Car Mode
5
4
7
Displays when GPS connection is lost.
When on battery power, displays battery level.
2 Driver Status
Select driver status.
Note: Not available in Car mode. See “Select Truck or Car Mode” on
page22.
8
3 Truck Tools
Select to enter truck information, access other tools (such as the Unit
Converter, Calculator), or to set warnings.
Note: Not available in Car mode. See “Select Truck or Car Mode” on
page22.
1
4 Go To Map
Tap to view location on the map.
5
4
5 Choose Destination
Tap to select an address or Point of Interest (POI).
6 Preferences
Tap to set device or routing options.
6
7
8
7 Mute/Unmute the Volume
Tap to mute or unmute spoken instructions.
8 Set Volume Louder or Softer
Tap to increase or decrease spoken instructions volume.
17
ABC Keyboard
Using Keyboard
Software keyboards are used when entering text.
Special Keys
Return to previous window.
View a list of valid options.
Delete last character and move back one space.
Add a space.
(800) 507-0482 / (910) 686-4281
18
Driver Status Field
Driver Status
Basic Settings
Select Driver Status
Note: Only available when in Truck mode. See “Select Truck or Car Mode” on
page 22
When set to truck, a simplified set of menus display and routing is calculated for
cars. When set to Truck, routing is calculated for the specified truck and load.
(See “Set Truck Information” on page 21). Also, when set to Truck, the driver
status setting controls how timers are calculated.
From the Main Menu:
•
Tap on the driver status.
Keyboard Setting
Select a Keyboard Type
For more information, see “Using Keyboards” on page 19.
From the Main Menu:
1
Tap Truck Tools > Preferences.
2
Tap on the Device tab.
3
Tap
4
Tap on the Keyboard option and select the keyboard type.
5
Tap Back to save changes.
and
to view the options.
19
Volume Settings
Volume Controls
Set the volume for spoken navigation instructions. You can select an option to
increase the volume automatically as the vehicle speed increases. See “Device
and Map Display Settings” on page 84.
Increase Volume
•
Tap
Decrease Volume
•
Tap
Mute/UnMute
•
Mute
Softer
Tap
Louder
Set Truck Information
page 22
The IntelliRoute® TND™ 500 uses truck information to calculate a route for
your specific type of truck and load.
For more truck information options, see “Truck Information” on page 83.
From the Main Menu:
1
Tap Truck Tools > Truck Info.
2
Tap
3
Tap the option to be set.
4
Enter the new information.
5
and
to view the options
20
Select Truck or Car Mode
Mode Setting
Select the type of vehicle. The IntelliRoute® TND™ 500 calculates routes based
on this type of vehicle. When Car is selected, some truck-related features will
not be available.
From the Main Menu:
1
Tap Truck Tools > Preferences.
2
3
Tap
4
Tap on the Mode option and select Truck or Car.
5
and
Set Truck Yard Time Zone
Truck Yard Time Zone
Select the time zone of the truck yard. With GPS reception, the IntelliRoute®
TND™ 500 displays times for your current location and your destination.
From the Main Menu:
1
Tap Preferences.
2
3
Tap
4
Tap on the Yard Time Zone option and select the time zone.
5
and
21
Set the Type of Route to Calculate
Set Route Type
Set the IntelliRoute® TND™ 500 to calculate the fastest route to a location.
For more routing options, see “Routing Settings” on page 86
From the Main Menu:
Weigh Station Warning
1
Tap Preferences.
2
Tap on the Routing tab.
3
Tap
4
Tap on the Routing option and select the route type.
5
and
Set Warnings
For more on warning options, see “Warning Settings” on page 87.
Note: Only available when in Truck mode See “Select Truck or Car Mode” on
page 22.
From the Main Menu:
1
Tap Truck Tools > Warnings.
2
Tap
3
Tap the warning to be set.
4
Tap
5
and
and
to specify the number of miles.
22
Destinations
Ways to Search for Locations
Find Addresses
To find an address, you can:
•
“Search for an Address” on page 31
•
“Search Near a City Center” on page 32
•
“Search Near an Intersection” on page 33
Find Points of Interest (POIs)
You can find Points of Interest (POIs) by:
•
“Search Near the Current Truck Location” on page 40
•
“Search In a City” on page 41
•
“Search Along the Route” on page 42
•
“Search Near the Destination” on page 43
24
Location Searches
Truck Mode
Destination Selection Window
1
To access this window from the Main Menu, tap Choose Destination.
1
2
4
3
5
Tap to return to the Main Menu.
2
Address Book
Tap to view a list of saved locations.
5
1
History
Tap to view a list of previous locations.
4
Car Mode
New Location
Tap to find a new address.
3
6
Back
Multi-Stop Trips
Tap to view a list of saved multi-stop routes or to create a new one.
6
Points of Interest (POIs)
Tap to search for a point of interest (POI) such as, a gas station, restaurant,
etc.
2
5
4
3
6
7
7
Set as Home
Set a location as Home to quickly calculate routes to or from the location.
Once Home has been set, this button will change to Take Me Home.
To reset to a new Home, simply delete the “Home” entry from your
Address Book.
Note: Only available in Car mode. See “Select Truck or Car Mode” on
page 21.
25
Destination Auto-Complete
Enter the first few characters in a name and a short list displays a couple of
names that start with the typed characters.
On the keyboard, the only keys available are for the next valid characters in a
search name.
Continue entering characters until the searched for name displays in the list.
Tap on the name to select it.
Other buttons on this window include:
Tap to return to the previous window.
Tap to view a longer list of names matching the typed characters.
Tap to enter a space.
Tap to delete the last character and move the cursor back one space.
26
About City and Street Names
Some cities with common names, such as “Concord” have several types of
names associated with a city.
If a name does not display, continue typing characters until the name you are
looking for displays in the list.
27
First Use
Select a City
First Use
On first use, the Select City Name Window displays. On the keyboard, type
the first few characters in the city name.
On the next use, the city name selected in the previous search displays. Tap on
the city name to search for a location in the city. To find locations in a different
city, type the first few characters in the new city name.
Short City List
Short City List
As you type the characters in the city name, a short list of matching city names
displays. Tap on a city to select it.
Long City List
Long City List
If the city is not displayed on the short name list, continue typing characters in
the city name or tap ENTER to display a long list of city names. Use the up and
down arrows to view all cities/states. Tap on a city to select it.
Address List
The City/State List displays cities of the selected name in different states. Use the
up and down arrows to find the correct city/state. Tap on the city/state name to
select it.
Address List
Special note: If a city name appears twice within a state, you may need to
check both for your specific address.
28
Find Addresses
Location Selection Window
From the Main Menu:
1
2
3
•
1
5
Intersection
Tap to search for an address by entering the city and two intersecting roads.
4
Back
Tap to return to the Destination Selection Window.
5
City Center
Tap to search for an address in a city.
3
Address
Tap to search for an address by entering the city, street and number.
2
4
Tap Choose Destination > New Location.
Menu
29
Search for an Address
Select City List
From the Main Menu:
1
Tap Choose Destination > New Location > Address.
2
Type the first few characters in the city name and tap Enter.
The Select City List displays.
3
Tap on the city/state from the displayed list.
4
Type the first few characters in the street name and tap Enter.
The Select Street List displays.
Select Street List
5
Tap on the street name from the displayed list.
6
Tap Enter to show a list of street numbers.
The Select Address Range List displays.
7
Tap on the street number range from the list.
The Confirmation Window displays:
Select Address Range List
8
Tap Begin Route to navigate to the location.
See “Destination Confirmation Windows” on page 61 for more options.
30
Search Near a City Center
Select Address List
From the Main Menu:
1
Tap Choose Destination > New Location > City Center.
2
The Select Address List displays.
3
Tap on the city/state name.
The Confirmation Window displays.
4
See “Destination Confirmation Windows” on page 61 for more options
31
Search For an Intersection
Select Address List
From the Main Menu:
1
Tap Choose Destination > New Location > Intersection.
2
3
Tap on the city/state name from the displayed list.
The Enter Primary Street Window displays.
4
Type the first few characters in the primary street name and tap Enter.
The Select Intersecting Street List shows streets that intersect with the
primary street.
Select Street List
5
Tap on the intersecting street name.
Select Intersecting Street List
6
32
Point of Interest Searches
Points of Interest Selection Window
1 My Truck
2
1
Tap to search for a point of interest near the current truck location.
2
Tap to search for a point of interest in a city.
3
4
3
5
4
7
End of Day
Tap to search for a point of interest near your end of day location.
This search is based on your remaining Driving Hours. (See “View Timers
and Odometer Readings” on page72.) The search along your route is based
on your estimated end of day location. The search includes the last 30
minutes of your trip.
5
6
Back
Tap to return to the Destination Selection Window.
7
Destination
Tap to find a point of interest near the route destination.
My Route
Tap to search for a point of interest along the truck’s route.
6
City
Menu
33
Points of Interest Category Window
1 Travel Center
Tap to search for a point of interest near the current truck location.
2
Tap to search for a point of interest in a city.
3
CAT Scale
Tap to search for a point of interest near your end of day location.
5
Truck Dealer
Tap to find a point of interest near the route destination.
6
More
Tap to select a non-truck related point of interest.
7
Back
8
Weigh Station
Tap to search for a point of interest along the truck’s route.
4
Parking & Rest Area
Menu
34
Types of Points of Interest (POIs)
Truck-Related POIs
The IntelliRoute® TND™ 500 offer thousands of Points of Interest. Truckrelated POIs include Truckers Friend and Rand McNally locations that offer
many amenities to address trucking professional needs. Consumer POIs are also
available.
On the Points of Interest Category Window, available POIs are:
Travel Center
Amenities include: Fueling stations,
Food stores, Restaurants, Showers,
etc. See “Select and Filter Travel
Center Amenities” on
page 38.
Parking and Rest Area
Weigh Station
CAT Scale
See “Select a Truck-Related
Point of Interest” on page 37.
Truck Dealer
Consumer Points of Interest
See “Select a Consumer Point
of Interest” on page 39.
35
POI Category Window
Select a Truck-Related Point of Interest
1 Perform a Point of Interest search.
On the POI Category Window:
2
Tap:
•
•
•
•
Parking & Rest Area, or
Weigh Station, or
CAT Scale, or
Truck Dealer
Note: To select a Travel Center see “Select and Filter Travel Center Amenities”
on page 38.
Note: To select a consumer POI see “Select a Consumer Point of Interest” on
page 39.
The Select <Type of POI> Window displays POI locations.
3
Tap on a location from the list.
36
POI Category Window
Select and Filter Travel Center Amenities
Truck-related Travel Center Points of Interest can include over 70 different types
of amenities. To select only amenities that you are interested in, filter your
search results.
1
Perform a Point of Interest search.
2
Tap Travel Center.
The Select Travel Center Window displays all travel centers in your
area.
Select Travel Center WIndow
3
Tap Select Amenities.
The Select Amenities Window displays.
4
Click on the checkbox of each amenity to be included in the search.
5
Tap OK.
The Select Travel Center Window re-displays.
6
Click on the Filter checkbox.
The Select Travel Center Window displays POI locations with your
selected amenities.
Select Amenities Window
7
37
POI Category Window
Select a Consumer Point of Interest
1 Perform a Point of Interest search.
2
Tap More.
The Select Category Window displays.
3
Tap on a category. (For example, tap Restaurant.)
4
If necessary, tap on a subcategory type.(For example, tap Bistro.)
The Select Point of Interest Window displays POI locations.
Select Category Window
Select Subcategory Window
5
6
In order to search for a point of interest by name, select the appropriate
category and (if applicable) sub category. Tap the Spell button to bring
up a keyboard.
7
Enter characters until the searched for name displays in the list.
8
Tap on the name to select it.
38
Find Points of Interest (POIs)
POI Category Window
Search Near the Current Truck Location
From the Main Menu:
1
Tap Choose Destination > Points of Interest > My Truck.
The POI Category Window displays.
2
Select <Point of Interest Type> > Window
Tap:
•Travel Center and filter for amenities. (See “Select and Filter Travel
Center Amenities” on page 38.)
•Parking & Rest Area, Weigh Station, CAT Scale, or Truck
Dealers.
• More and see “Select a Consumer Point of Interest” on page 38.
3
Tap on a location on the list.
4
39
Search In a City
Select Address List
From the Main Menu:
1
Tap Choose Destination > Points of Interest > City.
2
3
Tap on the city/state from the displayed list.
4
POI Category Window
Tap:
Dealers.
• M
ore and see “Select a Consumer Point of Interest” on page 38.
The Select (Point of Interest Type) displays POI locations.
5
Note: If no locations are found, a message displays.
Select <POI Type> Window
6
40
POI Category Window
Search Along the Route
1 Create a route or load a trip.
From the Main Menu:
2
Tap Choose Destination > Points of Interest > My Route.
3
Tap:
Dealers.
• M
ore. (See “Select a Consumer Point of Interest” on page 38.)
4
5
41
POI Category Window
Search Near the Destination
From the Main Menu:
2
Tap Choose Destination > Points of Interest > Destination.
3
Tap:
Dealers.
• M
4
5
42
POI Category Window
Search Near End of Day Location
From the Main Menu:
2
Tap Choose Destination > Points of Interest > End of Day.
3
Select <Point of Interest Type> Window
Tap:
Dealers.
• M
4
5
43
Find a Location by Tapping on the Map
Map Window
Tap on the Map and Avoid the Location
1 With a map displayed:
The crosshairs ()(crosshairs.bmp) display over your current location.
2
Touch and drag the map until the crosshairs are centered over the location.
The Tap on Map Location Window displays.
3
You may select “Route to Here”, or “Avoid”. If you select Avoid, this
segment is blocked permanently, until you select it again, and choose
“Remove Avoid”.
4
Tap Map Location Window
See “Route Map Window” on page 68 for more options.
44
Map Window
Tap on the Map and Route to the Location
3 With a map displayed:
The crosshairs
3
display over your current location.
Touch and drag the map until the crosshairs are centered over the location.
The Tap on Map Location Window displays.
3
Tap Route to Here.
3
Tap Map Location Window
3
45
Confirmation Window
Rate a Truck-Related Point of Interest
1
Search for and select a Truck-related Point of Interest. (See “Select a TruckRelated Point of Interest” on page 37.
On the Rating button, the top row indicates the community rating from
fellow drivers for the Point of Interest. The bottom row indicates your
individual rating.
2
Tap on the Ratings button.
The Ratings Window displays the Personal Rating tab.
Ratings Window
3
Use
4
Tap Create Comment to enter a personal comment on the facility.
and
to rate the facility.
Then tap Enter to save the comment.
The Ratings Window re-displays.
5
Your rating displays on the button.
Create Note Window
Note: To share ratings with fellow drivers, you must install the TND Dock
software. See “Install TND Dock Software” on page 87.
46
Manage Destinations
Set a Location as Home
Note: Only available when in Car mode.
From the Main Menu:
1
Tap Choose Destination > Set as Home.
Note: This will set your current location as home.
47
Save a Location in the Address Book
1
Search for a Destination.
On the Confirmation Window:
2
Tap Save.
The Entry Name Window displays.
3
Type a the name of the location.
4
Tap Enter to save the location in the Address Book.
The Confirmation Window re-displays.
5
48
Select a Location from the Address Book
Address List
From the Main Menu:
1
Tap Choose Destination > Address Book.
2
Tap on the All Addresses tab.
The Address List displays.
3
Tap on an address to select it.
4
49
Address Book Group Tab
Create an Address Book Group
You must create the group first, before you can add addresses to it.
From the Main Menu:
1
The Address Book Window displays.
2
Tap on the Groups tab.
3
Tap New Group.
The Enter Name Window displays.
Enter Named Window
4
Type the group name.
5
To select a different color folder, tap
6
Tap on a color, then tap Close.
7
When finished, tap Enter.
.
The Choose Folder Color Window displays.
The Groups tab re-displays.
The new group name is shown.
Choose Folder Color Window
50
Select a Location From a Group
Groups List
From the Main Menu:
1
2
Tap on the Groups tab.
The Groups List displays.
3
Tap on the location.
Group Address Window
4
51
Select a Location from the History List
Destination History List
From the Main Menu:
1
Tap Choose Destination > History.
The Destination History List displays.
2
Tap on the destination to select it.
3
52
This page intentionally left blank
53
Multi-Stop Routes
Multi-Stop Trips Window
Create a Multiple Stop Route
From the Main Menu:
1
Tap Choose Destination > Multi-Stop Trips.
The Multi-Stop Trips Window displays.
2
Tap New Trip.
The Enter Name Window displays.
Enter Name Window
3
Type the trip name.
4
To select a different color folder, tap
5
Tap on a color, then tap Close.
6
When finished, tap Enter.
.
The Choose Folder Color Window displays.
The Multi-Stop Trips Window re-displays.
The new trip name is shown.
Choose Folder Color Window
54
Add Locations to a Multi-Stop Route
Route Stop Window
Note: Add locations in the order you want to route to them.
From the Main Menu:
1
2
Tap on the route.
The Route Stop Window displays.
3
Tap Add Address.
The Add Destination Window displays.
Add Destination Window
4
• Enter New Address and search for an address. (See page 31.)
• History and select a History List location. (See page 52.)
• Saved and select an Address Book location. (See page 49.)
• POI and select a Point of Interest. (See page 34.)
The Confirmation Window displays for the location.
5
Confirmation Window
To add an address, tap:
Tap Add to Multi-Point.
The Route Stop Window re-displays. The location has been added to
the end of the route.
55
Manage Routes
After all locations have been added to a multi stop route, you can run the
optimizer wizard to organize your trip.
1
Select a 1st stop from your address list. If there is no preference, tap No
Preference to allow the wizard to calculate using your current location.
(continued on the following page)
56
(continued from the previous page)
2
Select Last Stop from your address list. If there is no preference, tap No
Preference.
3
Decide whether you want to return to your current location.
Note: If you want to include your current location as a starting location, you
can enter it in the list.
57
Remove a Stop from a Route
From the Main Menu:
1
2
Tap on the route.
3
Tap on the
4
Tap Yes.
next to the stop to be removed.
A confirmation window displays.
The Route Stop Window re-displays with the stop removed.
58
Select and Run a Saved Route
Multi-Stop Route List
From the Main Menu:
1
The Multi-Stop Route List displays.
2
Tap on the route to select it.
3
Tap on a stop to run the route.
4
5
When you hit Start Trip, it plans the actual route to your first stop. When
you have reached that stop, or at any other time, select the 2nd stop in the
list to determine an actual route there.
Route Stop Window
59
Delete a Route
Multi-Stop Route List
From the Main Menu:
1
2
Tap on the
(Button_DeleteStop.bmp) next to the route to be deleted.
The Multi-Stop Trips Window re-displays.
The selected route has been removed.
60
Maps
Destination Confirmation Windows
Button options on the Confirmation Window change, based on the type of
location selected.
Address Confirmation Window
Address Confirmation Window
1 Destination address
The selected location address.
2
Begin Route
Tap to begin routing to destination.
3
Route Via
Add this location as an interim stop between the origin and destination.
4
Save
Add the location to the Address Book. See “Save a Location in the Address
Book” on page 49.
5
Motor Carriers’ Road Atlas
Cross reference to printed Rand McNally Motor Carriers Road Atlas. “P”
refers to the Road Atlas page number, and the numbers after that refer to
the grid location.
6
Tap to view this location on a map.
7
Back
8
Go to Map
Menu
61
Consumer Point of Interest (POI) Confirmation Window
Consumer Point of Interest (POI) Confirmation Window
Button options always available on this window are:
1
Destination address
2
Begin Route
3
Add to Multi-Point
4
Save
Book” on page 49.
5
Cross reference to printed Rand McNally Motor Carriers Road Atlas.
6
Back
8
Go to Map
7
MCRA:
Menu
62
Truck-Related Point of Interest (POI) Confirmation
Window
Truck-Related Point of Interest (POI)
ConfirmationWindow
1
2
2
3
4
3
7
8
5
6
4
10
Services
Tap to view Trucker amenities at this location.
9
Begin Route
Ratings
Tap to rate amenities at this location.
5
Add to Multi-Point
6
Save
Book” on page 49.
7
8
Go to Map
9
MCRA:
Back
10 Menu
63
Address Book Confirmation Window
Address Book Confirmation Window
2
1
2
4
3
3
7
8
6
5
4
10
Create Note
Tap to create a note about the location.
5
Add to Multi-Point
6
Add to Group
Add this location to an Address Book group.
7
MCRA:
8
Go to Map
9
Edit Entry
Tap to edit the location address book entry.
9
Begin Route
Back
10 Menu
64
Multi-Point Route Confirmation Window
Multi-Point Route ConfirmationWindow
2
1
2
3
7
8
4
3
5
6
4
10
Services
Tap to view Trucker amenities at this location.
9
Begin Route
Ratings
Tap to rate amenities at this location.
5
Add to Multi-Point
Add this location to a multi-point route.
6
Save
Book” on page 49.
7
8
Go to Map
9
MCRA:
Back
10 Menu
65
Turn-by-Turn List
Turn-by-Turn List Window
1
3
2
5
4
6
1
Altitude of current vehicle location.
2
odom1,odom 2
Odometer readings
5
Distance
Distance to and type of next maneuver.
6
Street name
The street you will be on after performing the next maneuver.
7
rise/set
Times of sunrise and sunset.
4
MPH
Current speed.
3
7
altitude
Up/Down
Scroll up and down to view the list of maneuvers.
66
View the Turn-by-Turn List
Route Map Window
While navigating a route:
1
Tap
2
Use
3
To hide the turn-by-turn list tap
to display the turn-by-turn list.
and
to view the instructions.
again.
Turn-by-Turn Window
67
Route Map Window
Route Map Window
1
3
2
1
4
Tap to repeat spoken next maneuver instructions
2
9
8
7
Road Name
The name of street you will turn onto next.
3
5
Next Maneuver
Miles/Time
Tap to select current speed, destination arrival tIme, or time remaining to
the destination.
4
6
Turn-by-Turn slideout
Tap to view the turn-by-turn list.
5
Zoom in/zoom out.
Tap to zoom in and show greater detail on a smaller map or tap to zoom
out to show less detail on a larger map.
6
Main Menu
Tap to return to Main Menu.
7
Map Display
Tap to change the map display. An icon on the upper right corner of the
button displays the selected option. These are: North at the top of the
map (an N displays), direction of travel at the top of the map (and arrow
displays), or display the map in 3D view (a 3 displays).
8
Road Name
Tap to view the current road name, upcoming cross road name, city name,
and state.
9
Options
Tap to see current location information, change route settings, or detour.
68
Route Map Window
Detour Around Part of the Route
Use this procedure to recalculate a route to avoid the next several miles on the
route.
1
Tap
.
The Location Route Options Window displays.
2
Tap Detour.
The Detour Window displays.
3
Location Route Options Window
On the left side of the window, tap the number of miles on the route to be
avoided.
A new route is calculated and the Route Map Window re-displays.
Detour Window
69
Route Map Window
Detour Around a Specific Roadway
Use this procedure to recalculate a route to avoid, if possible, a specific roadway.
1
Tap
2
Tap Detour.
.
The Detour Window displays.
3
On the right side of the window, tap
and
to view a list of roads
in the current route.
4
Tap on one or more roadways to be avoided.
A yellow checkmark
5
appears in front of each selected road.
Tap Detour to recalculate the route.
A new route is calculated and the Route Map Window re-displays.
Detour Window
70
Cancel a Route
Route Map Window
1
Tap
2
Tap Cancel Route.
.
The route is cancelled and the Route Map Window displays your current
location.
71
72
Truck Tools
Note: Truck Tools are not available when in Car mode. See “Select Truck or Car
Mode” on page 22.
Truck Tools Window
Truck Tools Window
1
1
2
3
Return to the Main Menu.
2
5
6
7
9
Timers and Logs
View driving, on-duty, and maintenance timers or state logs.
4
8
Truck Info
Enter truck information (weight, length, etc.).
3
4
Back
Quick Plan
Quickly calculate a route between two major cities and display the distance,
driving time and cost.
5
Motor Carriers’ Road Atlas Road Info
View Rand McNally Truck Emergency contact information.
6
Calculator
Use a large key calculator.
7
Converter
Quickly convert distance, weight and temperatures.
8
Tell Rand
Compose and send a message to Rand McNally
9
Warnings
Set warning distances for driving time, duty hours and upcoming weigh
stations. Note: the warning type (audio or visual) is set in Preferences.
73
Timers and Logs
View Timers and Odometer Readings
Timers Window
From the Main Menu:
1
Tap Truck Tools > Timers and Logs > Timers.
The Timers Tab displays.
2
To reset a timer, tap on the timer.
The Timer Reset Window displays.
On the left, use the Change To field to make corrections to mileage or
hours. The mileage/hours then continue to count down from the changed
value. This would be used occasionally if you need to make an adjustment
to the current value.
Timer Reset Window
On the right, use the Reset field to set the most common reset value,
normally 0. At the beginning of each day or run, tap Reset to set the value
back to zero.
3
To change the current reading, in the Change To field, use
4
To reset the maximum settings, tap Reset.
5
(TruckInfo_
MinusButton.bmp) and (TruckInfo_PlusButton.bmp) to specify the new
setting, then tap Change.
74
View Driver Logs
Logs Window
From the Main Menu:
1
Tap Truck Tools > Timers and Logs > Logs.
The Logs Window displays.
2
Under the appropriate month, tap on the state.
The State Log Window displays.
State Log Window
75
Quick Planner Window
Calculate a Quick Route
Note: This tool is not available for all locations. Use this tool to quickly estimate
the mileage and time between 500 major cities in North America.
From the Main Menu:
1
Tap Truck Tools > QuickPlan.
The Quick Planner Window displays.
The revenue or cost per mile used in the last computation displays.
Enter Amount Window
2
Tap Major City 1 and select the city.
3
Tap Major City 2 and select the city.
4
To change the revenue or mileage cost, tap Revenue or Cost per Mile
and enter the per mile rate.
The Enter Amount Window displays.
5
Tap the new dollar amount and tap Enter.
The Quick Planner Window re-displays and shows the updated route
costs.
Quick Planner Window with conversion
76
M.C.R.A. Info Window
View Rand McNally Motor Carriers Road Atlas Emergency
Information
From the Main Menu:
1
Tap Truck Tools > M. C. R. A Emergency Info.
The M.C.R.A. Emergency Info Window displays.
2
Select the appropriate tab.
The State List or Province List displays.
3
Tap on the appropriate state or province.
The Motor Carriers’ Road Atlas Road Info Window for the selected
location displays.
4
Use the Up and down buttons to view all the information.
Note: Rand McNally will periodically provide text
M.C.R.A. Atlas Information Window
updates regarding changes to truck routing.
These updates can be found in each state.
If you see a discrepancy between posted routes
and the route provided on the TND this may
explain the cause.
77
Calculator
Use the Calculator
From the Main Menu:
•
Tap Truck Tools > Calculator.
78
Use the Unit Converter
Conversion Types Window
From the Main Menu:
1
Tap Truck Tools > Convertor.
The Converter Window displays
2
Tap on the first field and select the type of conversion to perform.
The Conversion Amount Window displays.
3
Tap on the second field and enter the value to be converted.
4
Tap Enter.
The Converter Window re-displays and show the converted value.
Conversion Amount Window
Converter Window
79
Tell Rand McNally About Window
Send a Message to Rand McNally
You can send a message to Rand McNally about updates, such as road
construction, updates to truck restricted road information, etc.
To use this feature, you must install the TND Dock application on your computer.
See “Install TND Dock Software” on page87 for more information.
Send a Message on Your Current Location
From the Main Menu:
1
Tap Truck Tools > Tell Rand.
The Tell Rand McNally About Window displays.
2
On the left side of the window, tap Current Location.
Your current location appears below the buttons.
Enter Message Window
3
On the right side of the window, tap the type of message you want to
send. The Enter Message Window displays.
4
Type your message.
5
When finished, tap Enter to save the message.
To discard the message and return to the previous window, tap Back.
The Tell Rand McNally About Window re-displays.
Note: You only need to enter a few brief words here, since you will be able
to modify the message later in TND Dock, using your computer keyboard,
before it is sent to Rand McNally
You can send message your message to Rand McNally the next time you
connect your IntelliRoute® TND™ 500 to your computer and use TND
Dock.
80
Send a Message on a Different Location
From the Main Menu:
1
2
On the left side of the window, tap Enter a Different Location.
The Select Address Window displays.
3
Search for select the location.
The selected location appears below the buttons.
4
Select Address Window
5
Type your message.
6
Your message is sent to Rand McNally the next time you connect your
IntelliRoute® TND™ 500 to your computer and use TND Dock.
81
Send a Message on a Location on the Map
From the Main Menu:
1
2
On the left side of the window, tap Enter a Different Location.
The Map Window displays.
3
Move the cursor to the location and tap Back.
The selected location appears below the buttons.
4
Map Window
5
Type your message.
6
Your message is sent to Rand McNally the next time you connect your
IntelliRoute® TND™ 500 to your computer and use TND Dock.
82
Customize
Truck Information
page 22.
Hazmat Type Specify the load hazardous material type. Options are:
None (not hazardous materials), Explosives, Gas,
Flammable, Flammable Solids, Organic, Poison,
Radioactive, Corrosives, Other, and PIH.
Weight Use
and
to specify the truck weight.
HeightUse
and
to specify the truck height.
WidthUse
and
to specify the truck width.
TrailersSpecify the type of trailer(s). Options are Straight, 48', 53',
and Double.
Set Truck Options
Set Truck Options
From the Main Menu:
2
Tap Truck Tools > Truck Info.
2
Tap
2
Tap the option to change.
2
2
and
Note: Rand McNally will periodically provide text
updates regarding changes to truck routing.
These updates can be found in each state.
If you see a discrepancy between posted routes
andthe route provided on the TND this may
explain the cause.
83
Device and Map Display Settings
WarningsSelect the type of speed warning to be issued. Options are:
Audio, Visual, Audio & Visual, or None. (See “Warning
Settings” on page 87 for more information on setting
warnings.)
Vehicle TypeSelect the vehicle mode. Options are: Truck or Car. This
options controls how routes are calculated. When the
Car mode is selected, some truck-related features are not
available. See “Select Truck or Car Mode” on page 22.
UnitsSelect how vehicle weight is displayed. Options are Imperial
or Metric.
Day/Night Map ColorSelect the default display mode for the device.
Options are: Auto (the device switches between
modes depending on the time of sunrise and
sunset), Day Mode (the display uses brighter
colors), and Night Mode (the display uses
darker colors).
POI IconsSpecify whether Point of Interest icons display on the map.
Options are: POI Icons On or POI Icons Off.
LanguageSelect the language to be displayed on screen and to be used
with spoken directions. Options are English, Spanish, or
French.
KeyboardSelect the type of keyboard to be used. Options are: ABC or
Computer.
Yard Time ZoneSelect the yard time zone. The IntelliRoute® TND™
500 calculates time zones for the truck and destination
based on this settings. Options are: Pacific Standard,
Mountain Standard, Central Standard, Eastern
Standard, Alaska Standard, or Hawaii Standard.
84
About
View device information.
GPS Data
View information on the current GPS fix.
Align ScreenCalibrate the touch screen. Note: If your TND seems to
have buttons that are hard to hit, try this. This can happen
sometimes after a software update from TND Dock.
Brightness
Set the brightness level for screen display.
85
Set Device and Map Display Options
Device Settings Window
From the Main Menu:
1
Tap Preferences.
2
Tap the Device tab.
3
Tap
4
5
6
and
86
Routing Settings
Note: When a specific type of roadway (Tollways, Ferries, or Freeways) or
maneuver (U-turns) is set to Avoid, a returned route may still include them if the
only legal route found contains these types of roads.
RoutingSelect the type of route to be calculated. Options are: Fastest
Route (shortest travel time) or Shortest Route (shortest
travel distance).
TollwaysSelect whether highways are considered in a calculated route.
Options are: Allow Tollways or Avoid Tollways. See
Note above.
FerriesSelect whether ferries are considered in a calculated route.
Options are: Allow Ferries or Avoid Ferries. See Note
above.
FreewaysSelect whether freeways are considered in a calculated route.
Options are: Allow Freeways or Avoid Freeways.
U TurnsSelect whether u-turns are considered in a calculated route.
Options are: Allow U-Turns or Avoid U-Turns. See Note
above.
Cross Country
BordersSelect whether roads crossing a country border are considered
in a calculated route. Options are: Allow Crossing
Country Borders or Avoid Crossing Country Borders.
When set to Avoid, a route may still cross country borders if
the only legal route contains roads that cross borders.
87
Set Routing Options
Routing Settings Window
From the Main Menu:
1
Tap Preferences.
2
Tap the Routing tab.
3
Tap
4
Tap on the option to change.
5
6
and
88
Warning Settings
page 22.
Note: Also see the Warning option in “Device and Map Display Settings” on
page 84 for information on setting how warnings will be issued (visual, audio,
visual and audio, etc.)
Use (TruckInfo_MinusButton.bmp) and (TruckInfo_PlusButton.bmp) to change
warning settings.
Driving DaySpecify when (in hours and minutes) to issue a warning before
reaching your driving hours limit.
On Duty HoursSpecify when (in hours and minutes) to issue a warning before
reaching your duty hour limit.
Speed LimitSpecify when (in MPH) to issue a warning when exceeding the
speed limit.
State BorderSpecify when (in miles) to issue a warning about an upcoming
state border.
TollboothSpecify when (in miles) to issue a warning about an upcoming
tollbooth.
Weigh StationSpecify when (in miles) to issue a warning about an upcoming
weigh station.
89
Set Warning Options
Warnings Settings Window
From the Main Menu:
1
Tap Truck Tools > Warnings.
2
Tap
3
4
5
and
90
91
TND Dock
Welcome to Rand McNally Setup Wizard Window
Install TND Dock Software
Note: If a “Transfer Music” message displays, click Cancel to close the
message and continue the installation.
On the computer:
1
Click Run Rand McNally TND Dock using the program provided on the
device. The Welcome to Rand McNally Setup Wizard displays.
2
Click on the I Agree button and tap Next.
The License Agreement Window displays.
If you do not agree, click on I Do Not Agree and tap Next to end the
installation.
3
Follow onscreen instructions to complete the installation.
When finished, the Installation Complete Window displays.
License Agreement Window
The TND Dock icon
corner of your screen.
displays in the system tray in the lower right
TND Dock Icon
92
Set Up to Use TND Dock
1
Turn on your IntelliRoute® TND™ 500 and allow it to power up.
2
Connect the device to your computer using the USB cable.
Open the TND Dock Main Window
Note: If a “Transfer Music” message displays, click Cancel to close the
message and continue the installation.
TND Dock Icon
•Double-click on the TND Dock icon
in the system tray.
93
TND Dock Main Window
1 Sign up for Road Construction Updates
Click on this checkbox to sign up to automatically receive road construction
updates.
2
Update My GPS
Click to update your IntelliRoute® TND™ 500 software.
An exclamation mark
indicates updates are available.
Note: You can download the updates without having your
TND connected.
3
Backup/Restore My GPS
Click to backup your GPS data. This button is also used to restore backed
up data to your device.
4
Show IntelliRoute GPS Info
Click to view device ID number and last software update date.
5
Read GPS Manual
Click to view the IntelliRoute® TND™ 500 User’s Guide.
6
Tell Rand McNally
Click to send a message to Rand McNally.
An exclamation mark
indicates messages are ready to be sent to Rand
McNally. You can click this button to review and edit messaages to
Rand McNally.
7
Click to view the Consumer website.
8
Go to the Rand McNally Website
Go to the Rand McNally Commercial Transportation Website
Click to view the Trucking website.
94
IntelliRoute TND 500
Check for IntelliRoute TND 500 Software Updates
On the TND Main Window:
An exclamation mark
next to the Update My GPS button indicates
that updates are available.
1
Roll your mouse pointer over the Update My GPS button and click
Update Now.
The Updating GPS Window displays.
TND Dock checks for software updates.
2
If updates are found, click OK to update the software on your device.
The GPS Updates Progress Bar displays as the updates are transferred
to your device. When finished, a “GPS Successfully Updated” displays.
3
Click OK.
The TND Main Window re-displays.
Note: You can download the updates without having your TND connected.
95
View IntelliRoute TND 500 Information
These logs are part of our continuous improvement program and only contain
information that can be used to diagnose software problems during device
operation. No location, tracking or personal information is included.
1
Click on the Show IntelliRoute TND Info button.
The TND Info Window displays.
2
To send logs to Rand McNally, click on the Send Logs button.
The Send Logs to Rand McNally Window displays.
3
In the Number of Days to Send field, select how many days worth of
information will be sent to Rand McNally.
4
Tap Send.
The TND Dock Main Window re-displays.
96
Backup TND Information
The backup is created on your personal computer. Internet access is not required
to use this feature. Rand McNally respects your privacy and cannot access or
back up your personal information.
1
Roll your mouse pointer over the Backup/Restore My TND button and
click Backup My TND. The TND Dock Backup Type Window displays.
2
Click on the type of backup to be performed:
•Full Backup - Backup the device software and personal data, such as
trips and address book.
•User Data Only - Backup only personal data, such as trips and address
book.
The Backup TND Progress Bar Window displays. When finished, a
message displays.
3
Click OK.
97
Restore GPS Information
1
Roll your mouse pointer over the Backup/Restore My GPS button
and click Restore My GPS. The TND Dock Restore Type Window
displays.
2
Click on the type of restor to be performed:
•Full Restore - Restore device software and personal data, such as trips
and address book.
•User Data Only - Restore only personal data, such as ts and address
book.
The Restore GPS Progress Bar Window displays.
NOTE: DO NOT DISCONNECT YOUR UNIT DURING THIS PROCESS
OR YOUR UNIT COULD BECOME INOPERATIVE.
When finished, a message displays.
3
Click OK.
98
View Manual
Note: Adobe Acrobat Reader is required to view the IntelliRoute® TND™ 500
User’s Guide
•Click on the Read Intelliroute TND Manual button.
The User Guide displays in an Adobe Acrobat Reader Window.
99
Sign Up for Road Construction Updates
On the TND Dock Main Window:
1
Click on the Sign Up for Road Construction Updates checkbox.
The Free Road Construction Updates Window displays.
2
Enter your e-mail address in the provided fields.
3
To receive additional offers and information, select:
•Receive Rand McNally product offers.
•Receive Rand McNally newsletter.
4
Click Submit.
100
Tell Rand McNally
1
Click on the Tell Rand McNally button.
The Tell Rand Window displays. Here you wil see comments you have
entered on your TND.
2
To add a comment, click Add Comment and enter information in the
provided fields.
3
To delete a comment, click on the comment and click Delete Comment.
4
When finished, click Done.
The Send Comments Window displays.
5
Click:
• Yes to send comments now.
• No to send comments later.
101
Go To Websites
Note: Connection to the internet is required to access the websites.
Rand McNally Consumer
•Click on the Go to the Rand McNally Website button.
The Rand McNally Consumer Home Page displays.
Rand McNally Commercial Transportation
•Click on the Go to Rand McNally’s Commercial Transportation
Website button.
The Rand McNally Commercial Transportation Home Page
displays.
102
Index
A
about GPS........................................................................ 2
address........................................................................... 30
Address Book
create a group............................................................. 50
save a location to......................................................... 48
select a location from................................................... 49
select a location from group........................................ 51
addresses
Location Selection Window.......................................... 30
search for an address................................................... 31
search near a city center.............................................. 32
search near an intersection.......................................... 33
audio output socket.......................................................... 1
auto-complete.......................................................... 27, 28
B
Basic settings.................................................................. 20
mute/umute................................................................. 21
select a keyboard type................................................. 20
select driver status....................................................... 20
select truck or car mode............................................... 22
set the route type........................................................ 23
set truck information................................................... 21
set truck yard time zone............................................... 22
set warnings................................................................ 23
volume settings............................................................ 21
battery power indicator............................................... 1, 11
C
charge the battery.......................................................... 12
first time use................................................................ 12
with the USB cable....................................................... 12
with the vehicle charger............................................... 12
with the wall charger................................................... 12
customer support.............................................................. 5
customize....................................................................... 81
device and map settings............................................... 82
set device and map options ..................................... 83
routing settings............................................................ 84
set routing options.................................................... 84
truck information......................................................... 81
set truck options....................................................... 81
warnings..................................................................... 85
set warning options.................................................. 85
D
destinations.................................................................... 25
Destination Selection Window..................................... 26
ways to find................................................................. 25
device
use standby................................................................. 14
F
features............................................................................ 3
find addresses................................................................. 30
From............................................................................... 74
H
History List
select a location from................................................... 52
I
install
mount......................................................................... 13
104
K
keyboards
ABC............................................................................. 19
auto-complete....................................................... 27, 28
Computer (QWERTY)................................................... 19
special keys . ............................................................... 19
L
location
select from History List................................................. 52
M
Main Menu..................................................................... 18
manage destinations....................................................... 48
create an Address Book group..................................... 50
save a location to Address Book................................... 48
select a location from Address Book . .......................... 49
select a location from Address Book group................... 51
maps
cancel a route.............................................................. 69
Confirmation Window......................... 59, 60, 61, 62, 63
detour around a specific roadway................................ 68
detour around part of route......................................... 67
Route Map Window.................................................... 66
mini-USB port................................................................... 1
mount
install........................................................................... 13
multi-stop routes............................................................ 53
add locations to........................................................... 54
create.......................................................................... 53
delete.......................................................................... 58
optimize...................................................................... 55
remove a stop.............................................................. 56
select a saved............................................................... 57
P
Points of Interestsearch along the route.......................... 42
search in a city............................................................. 41
search near destination................................................ 43
search near end of day................................................. 44
search near truck location.......................... 37, 38, 39, 40
tap on map and route to.............................................. 46
tap on the map and avoid............................................ 45
points of interest (POIs)................................................... 40
Points of Category Window......................................... 35
Points of Interest Selection Window............................. 34
power key......................................................................... 1
power the device............................................................ 14
R
reset button...................................................................... 1
reset the device............................................................... 15
routes
cancel.......................................................................... 69
S
safety information............................................................. 8
device safety................................................................ 10
installation safety........................................................... 9
navigation safety............................................................ 8
SD card slot...................................................................... 1
select a city..................................................................... 29
speaker............................................................................. 1
standby........................................................................... 14
start the device............................................................... 17
105
T
TND Dock
GPS
backup..................................................................... 92
check for updates..................................................... 90
restore...................................................................... 93
view GPS info........................................................... 91
view User Guide ...................................................... 94
install........................................................................... 87
messages..................................................................... 96
set up to use................................................................ 88
sign up for road construction updates.......................... 95
system tray icon........................................................... 88
TND Doc Main Window............................................... 89
websites...................................................................... 97
Commercial Transportation....................................... 97
Rand McNally Consumer........................................... 97
traffic antenna socket....................................................... 1
truck tools
calculate a quick route................................................. 74
calculator..................................................................... 76
send a message to Rand McNally................................. 78
current location........................................................ 78
different location...................................................... 79
location on map........................................................ 80
timers and logs............................................................ 72
view driver logs......................................................... 73
view timers and odometers ...................................... 72
Truck Tools Window..................................................... 71
unit converter.............................................................. 77
view MCRA emergency info......................................... 75
turn off the device.......................................................... 14
turn on the device.......................................................... 14
turn-by-turn list.............................................................. 64
view............................................................................. 65
U
User Guide...................................................................... 94
W
what’s included................................................................. 7
windows
Confirmation....................................... 59, 60, 61, 62, 63
Destination Selection................................................... 26
Location Selection........................................................ 30
Main Menu.................................................................. 18
Points of Interest Category........................................... 35
Points of Interest Selection........................................... 34
Route Map................................................................... 66
TND Dock Main........................................................... 89
Truck Tools................................................................... 71
(800) 507-0482 / (910) 686-4281
106

User`s Guide - RoadTrucker

Transcription

Similar documents

VALENCIA 2 Y100

quick start guide

Road Explorer 7 Quick Start Guide

XiteSolutions

PerfectServe practitioner mobile app: User Guide iPhone

3N1 Hot Tap Brochure

Marvel Outdoor Mobile Beer Dispensers

Shotmeister™ | Owner`s Manual

1991 TAP Annual Report - Technical Assistance Program

Android Product User Guide