docReplacement Parts - Travel Top Truck Caps
download 
Report Transcription
Replacement Parts - Travel Top Truck Caps
TRUCK CAP PARTS & ACCESSORIES 2014/2015 TABLE OF CONTENTS WINDOWS AND DOORS .......................................................................................... PAGE 4 HANDLES (POP UPS, TWIST, & L) AND SPACERS ....................................................... PAGE 5 T-HANDLES FOR ALL MODELS OF TRUCK CAPS & TONNEAU COVERS ....................... PAGE 6 HANDLES, LOCK SOCKS, AND COVERS ...................................................................... PAGE 7 HANDLES, LOCKBARS, AND SCREWS......................................................................... PAGE 8 GAS PROP BRACKETS, SWITCHES, AND STUDS ......................................................... PAGE 9 GAS PROPS AND SPECIFICATIONS ............................................................................. PAGES 10-11 CLAMPS (TITE-LOK) .................................................................................................. PAGES 12-14 CLAMPS (GRRREAT CREATION) ................................................................................. PAGES 15-17 LIGHTS (HARNESSES, WIRES, LOOP CONNECTORS, AND LOGIC BOXES) .................... PAGE 18 LIGHTS (BRAKE, INTERIOR, AND DOME) ................................................................... PAGE 19 LIGHTS, KNOBS, CRANKS, AND SPRAYS .................................................................... PAGE 20 BOOT RUBBER, DOUBLE BULB TAPE, AND CAB SKIN ................................................ PAGE 21 FOAM TAPE .............................................................................................................. PAGE 22 TRIM SEAL, DOOR RUBBER, TREAD, AND LIGHT STRIPS ............................................ PAGE 23 TAILGATE GUARDS & SEAL, SCOTCHLOCKS, AND HOLDERS ....................................... PAGE 24 AFTER MARKET ENHANCEMENT PRODUCTS ............................................................ PAGE 25 TONNO PRO, LO-ROLL, AND TONNO FOLD ............................................................... PAGE 26 HISPEC WHEELS........................................................................................................ PAGE 27 WE LOOK FORWARD TO EARNING YOUR BUSINESS! ASK ABOUT OUR FULL LINE OF DOORS AND WINDOWS PRODUCED BY BONDED ALL GLASS DOORS RADIUS CAP DOORS 4 WINDOORS AND SIDE ACCESS WINDOWS SIDE SLIDERS POP UP HANDLES* L-HANDLES* SPACERS*TWIST HANDLES TWIST HANDLE PART# SLH TRI-MARK POP UP T-HANDLES 1/2” FULLY THREAD SHANK PART# TM11738-04 C.W. USED BY GLASSTITE (RANDOM KEYS) EL2 L-HANDLE PART# 00585 BLACK PLASTIC CAM PLATE SPACER FOR T-HANDLE PUSH BUTTON LOCK WITH E-CLIP PART# EMC1-680KIT701 TRI-MARK POP UP T-HANDLES 1 7/8” SHANK PART# TM13946-01BLKRK C.W. PART# TM13946-01L C.C.W. (RANDOM KEYS) EMERGENCY RELEASE PART# 00681 HANDLE FOR PART# 00585 T-HANDLE PROVIDED WITH NUT, CAM, AND CAP PART# 5192020000 PART# T-500 KEY K127 PART# T-500J KEY J327 PART# 5130020000 RUBBER GROMMET PART# 5132010000 METAL CLIP 5 T-HANDLES * HANDLES* L-HANDLES* POP UP T-HANDLES INTERIOR SCREW MOUNT KEYED K127 PART# T-311 C.W. 1 7/8” SHANK PART# T311L C.C.W. 1 7/8” SHANK PART# T-311LSR C.W. 2 7/8” SHANK PART# T-311LSL C.C.W. 2 7/8” SHANK PART# T303 RIVOT C.W. HANDLE PART# T303-LSR RIVOT C.W. 2 7/8” SHANK PART# T303-LSL RIVOT C.C.W. 2 7/8” SHANK PART# T311C CHROME C.W. T-HANDLE 1 5/8” THREADED MOUNTING BASE AND SHANK PART# T-501S ALL GLASS REAR DOOR T-HANDLE INTERIOR SCREW MOUNT 1 1/2” SHANK THREADED 1/2” AT BOTTOM PART# T-323T C.W. KEY K127 PART# T-323LT C.C.W. KEY K127 PART# T-323TJ C.W. KEY J327 PART# T-323LTJ C.C.W. KEY J327 QLT HANDLES FOR A.R.E. REAR DOORS PART# T-ARE-15 C.W. T-ARE-215 C.C.W. PART# T-ARE-16 C.W. T-ARE-216 C.C.W. PART# T-ARE-17 C.W. T-ARE-217 C.C.W. PART# T-ARE-18 C.W. T-ARE-218 C.C.W. PART# T-ARE-19 C.W. T-ARE-219 C.C.W. PART# T-ARE-20 C.W. T-ARE-220 C.C.W. **KEYED WITH # SHOWN** T-HANDLE C.W. 2 1/2” THREADED SHANK KEYED K127 PROVIDED WITH NUT PART# T500-4 ALL GLASS REAR DOOR PART# 5213510747 REVERSE WASHER PART# 5199220000 ADHESIVE RING *WASHER ENABLES C.C.W. TURN T-HANDLE 1 1/2” THREADED SHANK KEYED K127 PART# T-501 ALL GLASS REAR DOOR 6 TEAR DROP T-HANDLE WITH COMPONENTS PART# L-502 CLOCKWISE T-HANDLE 1 1/2” FULLY THREADED SHANK PART# 5487020323 C.W. & C.C.W. USED BY GLASSTITE RANDOM KEYS (ONLY SOLD IN PAIRS) HANDLE COVERS* LOCK SOCK* L-HANDLE* G-HANDLE CARGO COVER HANDLE USED ON MOST LIDS PART# ML-2000 BLACK PART# ML-2001 CHROME L HANDLE FOR COMMERCIAL UNITS 3” SHANK PART# L-211 BLACK T-HANDLE COVER PROTECTS LOCKS FROM ELEMENTS PART# LS19-901S USED ON: T-323T & T-323LT T-HANDLE COVER PROTECTS LOCKS FROM ELEMENTS PART# LS232402 USED ON : T-500 & T500-4 G-HANDLE INTERIOR SCREW MOUNT PART# G-400 C.W. PART# G-400L C.C.W. (RANDOM KEYS AVAILABLE) 3 POINT FOLDING T-HANDLE 4 3/8” TALL X 5 5/8” LONG PART# 711 BLACK PART# 711C STAINLESS STEEL PART# 711CYL LOCK CYLINDER USED IN COMMERICAL UNITS SPECIAL KEYS ARE SPECIAL ORDER T-HANDLE COVER PROTECTS LOCKS FROM ELEMENTS PART# LS19-901 USED ON: T311 & T311L LOCK SOCK FOR TRIMARK PART# 14118-01 USED ON : TRI-MARK POP UP T-HANDLE 7 HANDLES * SCREWS* LOCK BARS* KEYS 10-24 TAPPED SCREWS FOR T-HANDLES PART# T-SCREWS (100 BAG) PLASTIC INSIDE HANDLE PART# 60011 USED ON T-HANDLE USED ON T-HANDLES ON MOST FRAMED DOORS PART# 52525-BRZ “LEFT” 3” INSIDE HANDLE PART# 52526-BRZ “RIGHT” 3” INSIDE HANDLE PART# 52527-BRZ “3.1875” INSIDE HANDLE LOCK BAR **COMES WITH ROD GUIDES** PART# LB54 = 54 3/8” PART# LB61 = 61 3/4” PART# LB65 = 65” PART# LB66 = 66” PART# LB72 = 72” 8 INSIDE HANDLE WITH BEND PART# 60019 “LEFT” PART# 60020 “RIGHT” USED ON “STATEWIDE” REAR DOORS INSIDE POT METAL HANDLE PART# IL-C-2.75 INSIDE L HANDLE PART# I-7003 HEAVY DUTY CHROME WE STOCK A VARIETY OF KEYS PLEASE CALL FOR AVAILABILITY SWITCHES * STUDS * GAS PROP BRACKETS GAS PROP SWITCH PART# AT-PROP-44 ENABLES DOMELIGHT TO TURN ON WHEN OPENING REAR DOOR GAS PROP BRACKET PART# GPB-168 GAS PROP BRACKET PART# GPB-1 GAS PROP BRACKET PART# GPB-3 THREADED BALL STUDS PART# TBS-1 10MM PART# TBS-516 13MM GAS PROP BRACKET PART# GPB-1R WITH REVERSE BALL ON INSIDE GAS PROP BRACKET PART# GPB-2 GAS PROP BRACKET PART# GPB-8 9 SUSPA GAS PROP SPECIFICATIONS PART# DESCRP COMP EXT LBS C16-03288 9" 13# SIDE WINDOW PROP 5.98 8.94 13.49 C16-03213 10" 13# SIDE WINDOW PROP 6.69 9.84 13.49 C16-10334 10" 22# SIDE WINDOW PROP 6.69 9.84 22.03 C16-09322 10" 40# PROP FOR TOOL BOXES 6.69 9.84 40.02 C16-09903 11 1/2" 24# SIDE WINDOW PROP 7.64 11.57 24.06 C16-10610 12" 13# SIDE WINDOW PROP 7.64 11.57 13.49 C16-03795 12" 24# SIDE WINDOW PROP 8.27 12.2 24.06 C16-13313 12" 30# SIDE WINDOW PROP (SAME AS C16-11027) 8.27 12.2 29.9 C16-10788 12" 35# SIDE WINDOW PROP 8.27 12.2 35.07 C16-11028 12" 40# SIDE WINDOW PROP 8.27 12.2 40.02 C16-12104 12" 50# SIDE WINDOW PROP 8.27 12.2 49.91 C16-12105 12" 65# SIDE WINDOW PROP 8.27 12.2 64.97 C16-12106 12" 80# SIDE WINDOW PROP 8.27 12.2 80.04 C16-22360 13" 35# SIDE WINDOW PROP 8.11 13.03 34.85 C16-06389 14" 24# REAR DOOR PROP 8.5 13.98 24.06 C16-21066 14.53" 24# REAR DOOR PROP 9.61 14.53 24.28 C16-10176 14" 35# REAR DOOR PROP 8.5 13.98 35.07 C16-09461 14" 40# REAR DOOR PROP 8.5 13.98 40.02 C16-11543 14.53" 40# REAR DOOR PROP 9.61 14.53 40.02 C16-08584 14" 60# REAR DOOR PROP 8.5 13.98 40.02 C16-04154 15" 24# REAR DOOR PROP 8.98 14.45 24.28 C16-21702 15" 40# REAR DOOR PROP 9.61 15.08 40.02 C16-22331 15" 45# REAR DOOR PROP WITH ANGLED END 9.41 15.71 44.96 C16-22127 15" 50# REAR DOOR PROP 9.61 15.08 49.91 C16-08941 16" 28# REAR DOOR PROP 9.41 15.71 28.1 C16-09209 16" 38# REAR DOOR PROP 9.41 15.71 37.99 C16-19568 16" 40# REAR DOOR PROP WITH ANGLED END 9.37 15.67 40.02 C16-14194 16" 45# REAR DOOR PROP 9.76 16.06 44.96 C16-15208 16" 45# REAR DOOR PROP 9.41 15.71 44.96 C16-19567 16" 45# REAR DOOR PROP WITH ANGLED END 10.16 16.46 44.96 C16-21949 16" 60# REAR DOOR PROP 9.53 15.98 60.03 C16-15645 17" 20# REAR DOOR PROP 10.83 17.13 20.01 C16-02622 17" 28# REAR DOOR PROP 10.83 17.13 28.1 C16-02648 17" 35# REAR DOOR PROP 10.83 17.13 37.32 C16-14732 17" 35# REAR DOOR PROP WITH ANGLED END 10.83 17.13 35.07 10 SUSPA GAS PROP SPECIFICATIONS PART# DESCRP COMP EXT LBS C16-23292 17" 38# REAR DOOR PROP WITH ANGLE ON ROD END 10.83 17.13 37.99 C16-06874 17" 40# REAR DOOR PROP 10.83 17.13 40.02 C16-04270 17" 45# REAR DOOR PROP 10.83 17.13 47.44 C16-04445 17" 55# REAR DOOR PROP 10.83 17.13 57.33 C16-06867 17" 60# REAR DOOR PROP 10.83 17.13 60.03 C16-08789 17" 80# REAR DOOR PROP 10.83 17.13 80.04 C16-06889 17" 97# REAR DOOR PROP 10.83 17.13 97.12 C16-23833 18" 100# TONNEAU COVER PROP 11.85 18.15 100.04 C16-20651 19" 40# REAR DOOR PROP WITH ANGLED END 10.83 18.7 40.02 C16-08568 20" 20# TONNEAU COVER PROP 11.85 19.72 20.01 C16-08316 20" 40# REAR DOOR PROP 11.85 19.72 40.02 C16-08260 20" 60# TONNEAU COVER PROP 11.85 19.72 60.03 C16-08053 20" 80# TONNEAU COVER PROP 11.85 19.72 80.04 C16-19222 20" 90# TONNEAU COVER PROP 11.85 19.72 89.93 C16-08054 20" 100# TONNEAU COVER PROP 11.85 19.72 100.04 C16-17796 20" 110# TONNEAU COVER PROP 11.85 19.72 109.94 C16-08055 20" 120# TONNEAU COVER PROP 11.85 19.72 120 C16-08376 20" 135# TONNEAU COVER PROP 11.85 19.72 134.89 C16-17566 20" 150# TONNEAU COVER PROP 11.85 19.72 149.96 C16-21478 20" 180# TONNEAU COVER PROP 11.81 19.69 179.86 C16-20877 22" 37# TONNEAU COVER PROP WITH ANGLED END 13.03 22.87 37.1 C16-16142 26" 60# TONNEAU COVER PROP 16.1 26.34 60.03 C16-12492 26" 74# TONNEAU COVER PROP 16.1 26.34 73.74 C16-13334 26" 87# TONNEAU COVER PROP 16.1 26.34 86.56 C16-12666 26" 100# TONNEAU COVER PROP 16.1 26.34 100.04 C16-12181 26" 150# TONNEAU COVER PROP 16.1 26.34 149.96 ST270P-40 27" 40# TONNEAU COVER PROP 15.5 27.0 40.0 C16-21081 29" 26# REAR GAS PROP 16.1 28.9 25.85 C16-23717 29" 100# TONNEAU COVER PROP 15.87 28.66 100.04 C16-17397 31" 45# TONNEAU COVER PROP 16.85 30.63 44.96 C16-17261 31" 60# TONNEAU COVER PROP 16.85 30.63 60.25 C16-17262 31" 70# TONNEAU COVER PROP 16.85 30.63 69.92 C16-18001 31" 80# TONNEAU COVER PROP 16.85 30.63 80.04 C16-21671 35" 62# TONNEAU COVER PROP WITH CLEVIS ON ROD SIDE 19.17 35.31 62.05 C16-15952 36" 40# TONNEAU COVER PROP 19.29 35.43 40.02 C16-10198 36" 60# TONNEAU COVER PROP 19.29 35.43 60.03 C16-10944 36" 80# TONNEAU COVER PROP 19.29 35.43 80.04 C16-15953 36" 100# TONNEAU COVER PROP 19.29 35.43 100.04 11 TITE-LOK CLAMPS * TITE-LOK CLAMPS PART# 32001-50 PART# 32007-24 ASSEMBLED 50 PER CASE A=0 TO 7/8’ CLAMPING RANGE B= 1-3/4” MAJOR REACH C=1” MINOR REACH DESIGNED FOR MOUNTING TRUCK CAPS OR COVERS WITH FIBERGLASS OR ALUMINUM RAILS PART# 32002-50 ASSEMBLED 50 PER CASE A= 0 TO 1 3/8” CLAMPING RANGE B= 1-3/4” MAJOR REACH C= 1” MINOR REACH DESIGNED FOR MOUNTING TRUCK CAPS OR COVERS WITH FIBERGLASS OR ALUMINUM RAILS ASSEMBLED 24 PER CASE A= 0 TO 1-3/8” CLAMPING RANGE B= 2-1/2” MAJOR REACH C= 1-3/4” MINOR REACH SPECIALTY CLAMP DESIGNED WITH EXTRA REACH FOR MOUNTING TRUCK CAPS WITH FIBERGLASS OR ALUMINUM RAILS PART# 3118-100 ASSEMBLED 100 PER CASE A= 0 TO 1-3/4” CLAMPING RANGE B= 1-1/2” MAJOR REACH C= 3/4” MINOR REACH DELUXE DESIGN FOR MOUNTING ALUMINUM RAIL TRUCK CAPS OR COVERS PART# 3118-NH ASSEMBLED 100 PER CASE (NO HANDLE) A= 0 TO 1-3/4” CLAMPING RANGE B= 1-1/2” MAJOR REACH C= 3/4” MINOR REACH DESIGNED FOR CAP RACKS, SHIPPING OR MOUNTING TRUCK CAPS OR COVERS WITH ALUMINUM OR FIBERGLASS RAILS PART# 3120-50 ASSEMBLED 50 PER CASE PART# 3120-NH50 ASSEMBLED 50 PER CASE(NO HANDLE) A= 0 TO 2” CLAMPING RANGE B= 2-3/16” MAJOR REACH C= 1-1/4” MINOR REACH FOR RACKS, SHIP OR MOUNTING CAPS OR COVERS W/ ALUM OR FIBERGLASS RAILS. PART# 3123-50 ASSEMBLED 50 PER CASE PART# 3123-NH50 ASSEMBLED 50 PER CASE(NO HANDLE) A= 0 TO 2-1/4” CLAMPING RANGE B= 2-3/16” MAJOR REACH C= 1-1/4” MINOR REACH DESIGNED FOR MOUNTING ALUM. OR FIBERGLASS RAIL TRUCK CAPS OR COVERS PART# 32027-50 12 ASSEMBLED 50 PER CASE A= 0 TO 3/4” CLAMPING RANGE B= 1-1/2” MAJOR REACH C= 1” MINOR REACH D= .675” DEPTH OF REACH FOR MOUNTING CENTURY, LEER, AND OTHER LIDS. CAN BE USED FOR TRUCK CAPS TITE-LOK CLAMPS * TITE-LOK CLAMPS PART# 3TL1031-50 ASSEMBLED 50 PER CASE A= 0 TO 7/8” CLAMPING RANGE B= 2-3/4” MAJOR REACH C= 1-3/4” MINOR REACH BRACKET D= 1” MINOR REACH BASE 1997 & NEWER FORD CLAMP REVISED TO REPLACE AC1031 PART# 3TL250S-50 ASSEMBLED 50 PER CASE A= 0 TO 1-3/8” CLAMPING RANGE B= 3” MAJOR REACH C= 1” MINOR REACH BASE D= 5/8” MINOR REACH BRACKET DESIGNED FOR 2004 FORD 150 EXTRA REACH, SHORTER BRACKET PART# 33008/TL1-24 ASSEMBLED 50 PER CASE A= 1-3/8” TO 1-7/8” B= 2” MAJOR REACH C= 1-1/4” MINOR REACH TOYOTA TACOMA W/UTILA TRACK (FOR CAPS WITH ALUMINUM RAILS) PART# 33008 PART# 33008/TL3 –24 ASSEMBLED 50 PER CASE A= 1-3/8” TO 1-7/8” B= 2-1/2” MAJOR REACH C= 1-3/4” MINOR REACH TOYOTA TACOMA W/UTILA TRACK (FOR CAPS WITH FIBERGLASS RAILS) PART# 3TL150-50 2 PER BAG(W/ HARDWARE) 50 BAGS/BOX TOYOTA TACOMA FOR LEER CAPS WITH POCKETED RAILS OR OTHER CAPS WITH SIMILAR RAILS (4” BOLT LENGTH) ASSEMBLED 50 PER CASE A= 0 TO 1-3/8” CLAMPING RANGE B= 2-1/2” MAJOR REACH C= 1” MINOR REACH DESIGNED FOR ‘97 TO ‘99 FORDS GIVES EXTRA REACH NEEDED FOR THE 150 AND SUPER DUTY FORDS PART# 3TL250-50 ASSEMBLED 50 PER CASE A= 0 TO 1-3/8” CLAMPING RANGE B= 3” MAJOR REACH C= 1” MINOR REACH DESIGNED FOR ‘99 AND NEWER FORD HEAVY DUTY 250 & 350 TRUCKS 13 TITE-LOK CLAMPS * TITE-LOK CLAMPS PART# 3TL1-50 ASSEMBLED 50 PER CASE A = 0 TO 1-1/2” CLAMPING RANGE B= 1-7/8” MAJOR REACH C= 1-1/8” MINOR REACH FOR MOUNTING TRUCK CAPS OR LIDS WITH FIBERGLASS OR ALUM. RAILS EQUAL TO G-1 PART# 3TL4-50 ASSEMBLED 50 PER CASE 50 PER CASE ASSEMBLED PART# 3TLAD-50 ASSEMBLED 50 PER CASE A= 0 TO 1-3/4” CLAMPING RANGE B= 1-5/8” MAJOR REACH C= 1-1/8” MINOR REACH FOR MOUNTING TRUCK CAPS WITH FIBERGLASS OR ALUM. RAILS IMPROVED DESIGN, REPLACES KH1 50 PER CASE A= 0 TO 7/8” CLAMPING RANGE B= 2” MAJOR REACH C= 1” MINOR REACH “ROCKING CLAMP” MOUNTS FIBERGLASS OR ALUM. CAPS REVISED TO REPLACE AC101 PART# 3TL103-50 PART# 3TL105-50 ASSEMBLED A= 0 TO 7/8” CLAMPING RANGE B= 1-3/4” MAJOR REACH C= 1” MINOR REACH D= .854 DEPTH OF BRACKET MOUNTS FIBERGLASS OR ALUM. CAPS REVISED TO REPLACE AC105 ASSEMBLED A= 0 TO 7/8” CLAMPING RANGE B= 2-3/4” MAJOR REACH C= 1-1/2” MINOR REACH “ROCKING CLAMP” MOUNTS FIBERGLASS OR ALUM. CAPS REVISED TO REPLACE AC103 14 ASSEMBLED A= 0 TO 1” CLAMPING RANGE B= 1-7/8” MAJOR REACH C= 1-1/8” MINOR REACH FOR MOUNTING TRUCK CAPS OR LIDS WITH FIBERGLASS OR ALUM. RAILS. EQUAL TO G-2 A= 0 TO 1-3/4” CLAMPING RANGE B= 2-15/16” MAJOR REACH C= 2-3/16” MINOR REACH FOR MOUNTING TRUCK CAPS OR LIDS WITH FIBERGLASS OR ALUM. RAILS EQUAL TO G-4 PART# 3TL101-50 PART# 3TL2-50 50 PER CASE 50 PER CASE GRRREAT CREATION CLAMPS 15 GRRREAT CREATION CLAMPS 16 GRRREAT CREATION CLAMPS 17 HARNESS* WIRES* LOOP CONNECTORS*LOGIC BOX TRIPLE 12V/ACC OUTLET PART# AV95-025 HINGED LIDS INCLUDES MOUNTING BRACKET “A” WIRE HARNESS (4 PRONG) PART# C90-907 TRUCK CAP CAN BE REMOVED W/OUT CUTTING WIRES PLASTIC LOGIC BOX PART# 20-702 USED TO HOOK UP REAR 3RD BRAKE LIGHT 2 WAY LOOP CONNECTOR PART# 212 12” PART# 248 48” 18 POWER GROUND HARNESS KIT PART # AP-HRN-283 22’ OF BLACK & RED WIRE “A” WIRE HARNESS (2 PRONG) PART# C90-801 METAL LOGIC BOX USED FOR HOOKING UP 3RD BRAKE LIGHT PART# AT-LC-1 (3 PRONG) PART# AC-LC-4 (4 PRONG) 3 & 4 WAY LOOP CONNECTOR PART# 312 12” PART# 360 60” PART# 412 12” BRAKE LIGHTS * INTERIOR LIGHTS * DOME LIGHTS PART# AT-LED-28X30-01 3RD BRAKE LIGHT 10” FLUSH MOUNT (USED BY JASON) PART# AT-LED-28X30-03 3RD BRAKE LIGHT W/DOME LIGHT 10” FLUSH MOUNT USED BY 2OTH CENTURY & RANCH PART# AT-LED-28X20-02 PART# AT-LED-36R-02 3RD BRAKE LIGHT 10” FLUSH MOUNT USED BY ASTRO 3RD BRAKE LIGHT 9 7/8” WEDGE STYLE USED BY LEER, A.R.E. JASON & ASTRO PART# AT-LED-35-003 PART# B-315 3RD BRAKE LIGHT 15” RECESS MOUNT USED BY ASTRO 3RD BRAKE LIGHT INTERIOR DOOR MOUNT COMES WITH BRACKET PART# AT-LED-28SMT 3RD BRAKE LIGHT 9.75” SURFACE MOUNT PART# AT-LED-180XQ12V CLEAR 3RD BRAKE LIGHT W/12V LED DOMELIGHT USED BY LEER PART# AT-DOMELIGHT 12 VOLT SLIMLINE DOMELIGHT PART# AT-LED-6VB INTERIOR “LED” BATTERY DOMELIGHT REQUIRES 4 “AAA” (NOT INCLUDED) REPLACES AT-BDL-5M PART# AT-LED-12V 12 VOLT DOMELIGHT INTERIOR “LED” REPLACES PART# AT-LED-DL6 PART#AT-LLP1-6-1 SINGLE PART#AT-LLP2-6-1 DOUBLE INTERIOR “LED” LIGHT SURFACE MOUNTED 19 LIGHTS *SPRAYS * KNOBS * CRANKS PART# ST-28G2 LED BRAKE LIGHT SURFACE MOUNT TAPE ON FRONT SLIDER HANDLE PART# 60004 HANDLE PART# 60005 TAPE FOR HANDLE PART# ST-28 LED BRAKE LIGHT W/ SHOURD PART# 5126020002 KEEPER FOR FRONT DOUBLE SLIDER PART# 5126020001 LATCH FOR FRONT DOUBLE SLIDER PART# 5422020000 SINGLE STUD PART# 5424020000 DOUBLE STUD CRANK ASSIST ARM FOR AWNING WINDOW PART# 54400200708 (7 1/2”) PART# 5441030408 (4 1/2”) KNOB & SCREW SOLD SEPERATELY 303 SPRAY PROTECTANT PART# 230330 8 OZ PUMP PART# 030340 16 OZ TRIGGER SPRAY PART# 5445020100 KNOB FOR AWNING WINDOW PART# 6051203212 SCREW 8/32 X 1/2 STRAP HINGE FOR BONDED ALL GLASS REAR DOOR 20 BOOT RUBBER* DOUBLE BULB* CAB SKIN UNI-GRIP 4” BOOT RUBBER CLIPS ON ONE END PART# SD-515 UNI-GRIP 3” ACCORDIAN BOOT RUBBER CLIPS ON BOTH ENDS PART# EDI5381 EPDM DOUBLE BULB TAPE ADHERES TO CAP WITH I” H2 ACRYLIC BASED ADHESIVE PART# SCS-200 (200’ REEL) UNI-GRIP 3” BOOT RUBBER CLIPS ON ONE END PART# SD-509 CLEAR TRUCK BOOT PART# TC100 20” W X 13” H PART# TC200 24” W X 16” H 2” CLEAR CAB SKIN PART# CS/2 (100’ ROLL) 21 ** FOAM TAPE ** CTP100 3/16” X 1” X 30’ PAPER BACK (32 ROLLS/CASE) CTP125 3/16” X 1 1/4” X 30’ PAPER BACK (24 ROLLS/CASE) CTP150 3/16” X 1 3/8” X 30’ PAPER BACK (20 ROLLS/CASE) CTP200 3/16” X 1 7/8” X 30’ PAPER BACK (16 ROLLS/CASE) CTP250 3/16” X 2 3/8” X 30’ PAPER BACK (12 ROLLS/CASE) CTP050 3/16” X 1/2” X 50’ PAPER BACK FOR WINDOWS (38 ROLLS/CASE) DPBL07500750020 3/4” X 3/4” X 20’ 7# DENSITY (24 ROLLS/CASE) HDCTP150 3/16” X 1 1/2” X 50’ PAPER BACK HEAVY DUTY (10 ROLLS/CASE) HDCTP200 3/16” X 2” X 50’ PAPER BACK HEAVY DUTY (8 ROLLS/CASE) HDCTP250 3/16” X 2 1/2” X 50’ PAPER BACK HEAVY DUTY (6 ROLLS/CASE) CTM100 3/16” X 1” X 30’ MYLAR BACK TAPE (32 ROLLS/CASE) CTM125 3/16” X 1 1/4” X 30’ MYLAR BACK TAPE (24 ROLLS /CASE) CTM150 3/16” X 1 3/8” X 30’ MYLAR BACK TAPE (20 ROLLS/CASE) CTM200 3/16” X 1 7/8” X 30’ MYLAR BACK TAPE (16 ROLLS/CASE) CTM250 3/16” X 2 3/8” X 30’ MYLAR BACK TAPE (12 ROLLS/CASE) **SPECIAL SIZES AVAILABLE** ASK ABOUT CASE QTY IN SPECIALITY WIDTHS & THICKNESSES: 1/32”, 1/16”, 1/4”, 1/2”, 5/8”, 3/4”, & MORE BLACK OR GREY 20’, 30’, 50’, & 100’ CUT TO YOUR SPECIFICATIONS 22 TRIM SEAL* DOOR RUBBER* TREAD* LIGHTS TONNEAU COVER TRIM SEAL (AVAILABLE IN VARIOUS SIZES & BULB LOCATIONS) PART# TSB1600AB-3 3/16” I.D. 1600 SERIES 125’ ROLL PART# TSB1600C-8 1/8” I.D. 1600 SERIES 250’ ROLL PART# TSB1700C-3 3/16” I.D. 1700 SERIES 250’ ROLL PART# 4157020000 SINGLE LEAF BOTTOM DOOR RUBBER PART# 4146020000 DOUBLE LEAF/BULB COMBO BOTTOM DOOR RUBBER PART# 4017020000 DOUBLE LEAF BOTTOM DOOR RUBBER (PICTURED) PART# 401-1 6 3/4” WIDE RUBBER STEP TREAD W/ GROOVES COMES W/3M DOUBLE STICK TAPE “D-LOOP” PART# 5423020000 PART# 37042078 6” WIDE NON-SKID STEP TREAD COMES W/3M DOUBL E STICK TAPE PART# TRUCKLYTE-1000 12V LIGHT STRIP LEFT & RIGHT USED TO LIGHT TRUCK BED BONDED DOOR ROTARY LOCK STRIKE 23 TAILGATE GUARDS & SEAL * SCOTCHLOCKS* HOLDERS BUNDLES OF 10 QUALIFY TOWARDS “FREIGHT PROGRAM” (ANY COMBINATION) PART# CH99-06 99-2006 CHEVY REPLACEMENT TAILGATE GUARD PART# CH07 2007-CURRENT CHEVY REPLACEMENT TAILGATE GUARD PART# DG02-06 02-CURRENT DODGE RAM REPLACEMENT TAILGATE GUARD PART# DOK08 08-CURRENT DODGE DAKOTA REPLACEMENT TAILGATE GUARD PART# FRS-6 (6’ BAGGED) PART# FRS-125 (125’ BULK) FRONT RAIL SEAL PART# UTGS-10 (10’ LENGTH) PART# UTGS-200 (200’ BULK) ULTIMATE TAILGATE SEAL SCOTCHLOCKS (500 PER BAG) PART# WCL6164 3M BLUE 16—14 GA PART# WCL6184 3M WHITE 18– 14 GA PART# 302-75 3M VINYL ELECTRICAL TAPE 3/4” X 60 YDS (10 TO A SLEEVE) KLEEN BTWEEN PART# BTWEEN FOR CLEANING WINDOW BETWEEN CAB AND CAP PART# WCB64 3M BLUE BUTT CONNECTORS 16-14 FOLD DOWN GARMENT HOLDER W/SCREW MOUNTING KIT PART# 90-7030-01 12” PART# 90-7010-01 24” PART# THECLAW EXTENDS 48” TO 96” FOR HARD TO REACH ITEMS IN TRUCKBED 24
