Video Intercom System - Intelligent Home Online

Transcription

Video Intercom System - Intelligent Home Online
Video Intercom System
IH692 user manual
CALL
UNLOCK
TALK/MON
IN-USE
Manual covers IH-692 Master and IH-692 Slave Monitors
PRECAUTIONS
●● Connect this unit ONLY to other compatible units. Do not connect it to
any other type of alarm or auxiliary device. Connecting anything else
to this unit may damage it or prevent it from operating properly, and will
invalidate the warranty.
●● Do not place cables from the AC/DC adapters, camera or monitor where
they can be damaged or stepped on. Protect the cables by keeping
them out of the way of children, pets and routine household traffic. Do
not place heavy objects on power cables; do not cover them with rugs or
carpet.
●● Unplug the AC/DC adapters from the wall outlet when the system is not
in use for a long time.
●● Slots or openings in the back of the monitor, are provided for ventilation
and to ensure reliable operation of the video monitor or equipment and
to protect if from overheating. These openings must not be blocked or
covered. The monitor should never be placed near or over a radiator and
should not be placed in a built-in installation or enclosure unless proper
ventilation is provided.
●● All parts should be protected from violent vibration. Impact shocks and
dropping may damage the product and should be avoided.
●● Installation of doorbell camera facing into direct sunlight may affect
quality of the video.
FFEATURES
UNLOCK
INTERCOM
MON/TALK
IN-USE
Touch Screen Operation
All the operations and settings can be done by
touching the LCD screen.
Full Screen Digital Clock
The date and time will displayed when touch
anywhere of the screen, and it will closed
automatically after 3 minutes.
Press-To-Talk Function
A special ‘listening’ mode which suppresses external
background noise.
Auto Picture Memory(optional)
When the house owner is out, the monitor can take
pictures of visitors who called your door/bell; you can
check pictures with date and time later on.
RLC Control Unit(not included)
To connect second electric lock or light.
CONTENT
1. Parts and Functions - - - - - - - - - - - - - - - - - - - - - - - - - - 1
2. Installations- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
3. System Connection - - - - - - - - - - - - - - - - - - - - - - - - - - 2
4. Bus Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
5. Multi Door Camera Connection - - - - - - - - - - - - - - - - - - 4
6. Basic Video Door Phone Operation - - - - - - - - - - - - - - - 5
7. Operation for Multiple Doorbell Cameras - - - - - - - - - - - 6
8. Intercom Function- - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
9. Ring Tone and Other Settings - - - - - - - - - - - - - - - - - - - 7
10. Picture Memory Operations- - - - - - - - - - - - - - - - - - - - 8
11. Image and Volume Adjustment- - - - - - - - - - - - - - - - - - 9
1. Parts and Functions
LCD Touch Screen
Microphone
CALL button
CALL
UNLOCK
UNLOCK button
TALK/MON
TALK/MON button
IN-USE
LED indicator
Speaker
Ventilation Vent
connect slave monitor here
connect power here
Power
Slave Mon
CAM 1
connect first
camera here
Audio
H-set
connect audio phone here
CAM 2
connect second
camera here
145~160 cm
2. Installations
Use the screws to fix the Mounting Bracket on the wall. Screws and brackets are included with the
product for this purpose.
-1-
3. System Connection
Terminals and descriptions:
●●
1RPower positive. +12V present when Outdoor Station calling or being monitored.
●●
2W Power negative (GND)
●●
3YImage signal (Video signal)
●●
4B Talk and control signal (Audio signal)
●●
POWER TERMINAL: Black wire DC negative (-)
●● POWER TERMINAL: White wire DC positive (+)
It’s recommended you use shielded alarm cable 4x0.3mm2 for distances up
to 30m. For distances over 30m, we suggest you add coaxial cable (RG-59) to
connect the 3Y and 2W pin in addition to the alarm cable.
UNLOCK
INTERCOM
MON/TALK
4
* Note 1
2
3
JP-LK
Black
Yellow
Red
1R
2W
3Y
4B
White
Black
Yellow
1R
2W
3Y
4B
Red
CAM 2
4B
2W
+12
Audio
H-set
1R
2W
3Y
4B
Slave Mon
CAM 1
1R
2W
3Y
4B
LB
1R
2W
3Y
4B
White
DC DC+
JP-VD
1
1R
2W
3Y
4B
* Note 2
* Note 3
JS-VP
AC ~
IN-USE
Shielded layer
●●
Note 1: Plug the AC Adaptor in to the AC power terminal ensuring it is well seated.
●●
Note 2: If you want to use multiple monitors: For a single Monitor system, keep
the jumper (which is already on JP-VD ). If you are setting up a multi-Monitor system, remove
all JP-VD jumpers EXCEPT the last Monitor. NB If you are setting up monitors PARALLEL
rather than chained, the ‘last’ monitor is the one physically furthest away from the door station.
●●
Note 3: JP-LK is used to enable the electric Lock function. Remove the jumper if you are
going to use the Monitor power to supply power to the Lock. Refer to the Doorbell camera
manual.
-2-
-3-
DCDC+
1R
2W
3Y
4B
4B
2W
+12
CN101
CAM 1
CAM 2
1R
2W
3Y
4B
Slave Mon
1R
2W
3Y
4B
JP-LK
JP-VD
White
Black
Red
White
Black
Red
GX-3P
4B
2W
+12
INSIDE
(90 Degree ROTATE)
JS-AP
JS-LK
Audio
H-set
Back View
IN-USE
JP-VD Removed!
Back View
1R
2W
3Y
4B
1R
2W
3Y
4B
JP-LK
JP-VD
CAM 2
UNLOCK
AC ~
CAM 1
MON/TALK
4B
2W
+12
1R
2W
3Y
4B
IN-USE
4B
2W
+12
1R
2W
3Y
4B
DC
DC+
UNLOCK
More
Monitors
JP-VD Reserved!
JP-LK
JP-VD
Back View
1R
2W
3Y
4B
AC ~
1R
2W
3Y
4B
IN-USE
MON/TALK
INTERCOM
Audio
H-set
INTERCOM
CAM 2
1R
2W
3Y
4B
DCDC+
UNLOCK
Slave Mon
Extending Audio Phone:
LB
Back View
CAM 1
1R
2W
3Y
4B
JP-LK
JP-VD
Slave Mon
JS-VP
JP-VD Removed!
CN101
1R
2W
3Y
4B
CN101
Black
MON/TALK
CAM 2
Red
CAM 1
White
4B
2W
+12
1R
2W
3Y
4B
DC
DC+
UNLOCK
IN-USE
MON/TALK
INTERCOM
Slave Mon
Yellow
CN101
1
2
3
INTERCOM
AC ~
4. Bus Connection
Audio
H-set
Audio
H-set
JS-VP
1R
2W
3Y
4B
Black
LB
2# Camera
Red
-4-
JS-VP
LB
JP-VD Removed!
1R
2W
3Y
4B
1R
2W
3Y
4B
JP-LK
JP-VD
Back View
CAM 1
White
DC DC+
UNLOCK
IN-USE
MON/TALK
INTERCOM
AC ~
JP-VD Removed!
1R
2W
3Y
4B
1R
2W
3Y
4B
JP-LK
JP-VD
Back View
CAM 2
Audio
H-set
4B
2W
+12
1R
2W
3Y
4B
DC
DC+
UNLOCK
IN-USE
MON/TALK
INTERCOM
AC ~
More
Monitors
JP-VD Reserved!
NOTE: When connect two Outdoor Stations, one/two camera Mode should
be set to 2 on the 1# Monitor. (Menu-setup-installation-one/two camera)
4B
2W
+12
1R
2W
3Y
4B
Slave Mon
Yellow
CAM 1
1R
2W
3Y
4B
CN101
Audio
H-set
Red
CN101
Black
Slave Mon
White
1R
2W
3Y
4B
1R
2W
3Y
4B
JP-LK
JP-VD
Back View
CAM 1
Yellow
4B
2W
+12
1R
2W
3Y
4B
DC
DC+
UNLOCK
IN-USE
MON/TALK
INTERCOM
Slave Mon
1
2
3
CN101
1
2
3
1# Camera
AC ~
5. Multi Door Camera Connection
Audio
H-set
CAM 2
CAM 2
6. Basic Video Door Phone Operation
1. When a visitor presses the Call button on the
doorbell/camera unit, the monitor will ring and
display the visitor’s image; also the IN-USE LED
will turn red.
TALK
EXIT
rec
2. To answer the doorbell, press the TALK/MON
03
button (or touch TALK icon on the screen). You
can talk with the visitor for 90 seconds before
the screen will automatically shut off. To end the
Intelligent Home S y s t e m
conversation yourself, press TALK/MON Button (or touch TALK icon) again. If nobody responds
to the visitor, the monitor will turn off automatically after 30 seconds
3. Press-To-Talk: The monitor has a special
‘listening’ mode which suppresses external
background noise and makes it easier for you to
hear the person at the door. When the mornal
Press
to talk
EXIT
rec
03
talk is started, press
to enter PressTo-Talk state, and you will in Listening state
Press
to talk
by default, press
/
to toggle between
Speaking state and Listening state. Press
Auto Talk to exit Press-To-Talk state and return to
normal talking state.
Intelligent Home S y s t e m
IMG 16
Auto Talk
4. When Monitor is in standby, press TALK/MON
button (or touch anywhere on the screen, then
touch monitor ) and the screen will display the
view from the doorbell (Outdoor Station). During
monitoring state, press TALK/MON button (or
EXIT
rec
03
2009/02/14
10:30
Intelligent Home S y s t e m
touch TALK icon) to talk to someone outside. Press again to exit. Monitoring state is limited to
30 seconds and will shut off automatically.
5. When you wish to open the door lock, press UNLOCK button (or touch
Electric Lock.
icon) to release the
6. To get the system to record pictures automatically from the doorbell when people come to the
door, press MENU, press SETUP and press AUTO-RECORD on. It will record up to 120 pictures
of people at the door even if you are not there to answer.
7. Touch the
icon to hide the icons; to re-show the icons, touch anywhere on the screen again.
8. Press the CALL Button (or touch
rec
icon) to manually record the current picture.
-5-
7. Operation for Multiple Doorbell Cameras
1. If two doorbell cameras are required, the One/Two Camera option should be enabled. To do
this, touch setup icon to enter SETUP. Now press ADVANCED SET (tings) submenu. Enter the
password (2008), and change the mode to 1/2 CAMERA.
2. Two doorbell cameras can be connected to the monitor directly. The second outdoor station can
be a doorbell or a CCTV camera. For the system to function correctly, you must have at least
one doorbell. If there is only one Outdoor station to be installed, the Outdoor station must be
connected to the CAM1 Port. The second must be connected to the CAM2 Port.
3. When monitoring multiple doorbells/CCTV cameras (outdoor stations), switch between them by
pressing TALK/MON. Each time you press TALK/MON it will take you to the next outdoor station.
4. Please Note: If two doorbells connected, and each doorbell is connected to an electric lock,
when you operate EITHER of the UNLOCK buttons on EITHER monitor, it will unlock BOTH
locks. If you don’t wish for this to happen, you can purchase and install an RLC controller and
operate them separately
8. Intercom Function
1. Intercom can be initiated by either Monitor.
Press the INTERCOM button, the other Monitor
will ring. Press TALK/MON button on the other
Monitor to answer.
2. To end the intercom conversation, press TALK/
MON. If no one answers, it will exit automatically
after 30 seconds.
3. The doorbell function will always override the
intercom function.
-6-
Redial
EXIT
Intelligent Home S y s t e m
9. Ring Tone and Other Settings
1. Touch anywhere on the screen and the date/time page
will be displayed. The first line shows the current time,
the second line shows the current date and weekday.
The date/time page will close in 3 minutes if no buttons
are pressed.
2. Entering the main Menu: Touch the screen
again to enter the Main Menu, press
enter Setup Menu.
setup
Intelligent Home S y s t e m
icon to
play
3. Outdoor Tone and Intercom Tone are for
choosing the doorbell melody and the intercom
melody. Touch
value
/
monitor
intercom
setup
to increase/decrease the
exit
Intelligent Home S y s t e m
4. Monitor Time: To change the amount of time the
monitor will remain active if no buttons are pressed,
use the plus and minus buttons to set between 30
seconds and 10 minutes.
5. Auto Record: If the item is set to ON(the LED will
flashes green), the Monitor will record the image
automatically in 2 seconds after the visitor pressed the
CALL Button on the Outdoor station(the LED turn to
red if there is a missing call picture).
6. Advanced Set: To access the Advanced Settings, a
password will be required before entering. The default
password is 2008
7. Input the password by touching the digital keypad on
the screen to enter.
8. The 1/2 Camera can be set to 2 if two outdoor
stations are to be installed.
9. Unlock Time: can be adjusted according to different
locks.
Outdoor Tone
--
01
Intercom Tone
--
05
Monitor Time
-- 1min
Advanced Set...
Auto Record
--
OFF
Exit
Intelligent Home S y s t e m
Password: 0
***
*
Intelligent Home S y s t e m
One/Two Camera
--
1
Unlock Time
--
3
Date/Time Set...
Other Device Set...
Information...
Exit
Intelligent Home S y s t e m
-7-
1
2
3
4
5
6
7
8
9
0
#
10. Date/Time Set: to amend the time and date,
access this option. Use MENU button to move the
cursor, and plus minus buttons to change the date/
time. Touch the ‘#’ icon (on the number key pad) to
save and exit or touch the''icon to cancel
Time 1 1 : 3 5
Date 2 0 0 9 0 2 1 4
#: OK
* : Cancel
1
2
3
4
5
*
6
7
8
9
0
#
Intelligent Home S y s t e m
11. Other Device Set: submenu: RLC and Remote
settings.
12. Information: submenu: shows the hardware/
software version and voltage info. Press Restore
to Default if you wish to restore all the settings to
factory defaults.
Hardware ver
A1.1
Software ver
A6.1
Voltage
16.2V
Manufacture
D1.2
Restore to default
Exit
Intelligent Home S y s t e m
10. Picture Memory Operations
1. Pictures can be recorded both manually and
automatically. Image capacity is about 128
pictures. When the memory is full, the oldest
picture will be replaced.
play
monitor
intercom
2. Manually taking pictures: If you wish
to take a picture, you can do so by pressing
MONITOR, then pressing the REC icon
setup
exit
rec ..
Intelligent Home S y s t e m
3. Automatic recording: (see instructions above to enable this option)
4. Note: Indicator light flashing green - image recorder "ON" and ready; Indicator light steady
red - image recorder has new images waiting to be viewed; Indicator light steady green - image
recorder "OFF" .
5. Viewing pictures: To view the pictures on
your monitor, press the PLAY button. The latest
pictures will be shown. To move through the
pictures, press either the PLAY button (or touch
the
play
IMG 16
DELETE?
LAST
DELE?
icon). To delete a picture, touch
the DELE? icon. A 'DELETE?' hint will show on
the upper right of the screen. Touch the DELE?
icon again to delete the current picture. Please
note that deleted pictures cannot be restored.
-8-
NEXT
EXIT
Intelligent Home S y s t e m
11. Image and Volume Adjustment
1. During monitoring or talking, press
MENU will be displayed.
icon, ADJUST
TALK
2. Touch the + / - icons to increase or decrease current
value; touch the
adjustment item.
EXIT
icon to switch to the next
3. The first item is Scene mode selection: Total 4
SCREEN modes can be selected in sequence:
NORMAL, USER, SOFT and BRIGHT. Whenever
you modify BRIGHTNESS or COLOUR, SCENE item
will be set to USER mode automatically.
rec
03
Intelligent Home S y s t e m
soft
Scene
4. RATIO can be shifted from 16:9 to 4:3.
5. The Brightness and Color item is for image quality
setting. Adjust the value to get the best image.
+
—
Intelligent Home S y s t e m
6. The Ring Volume and Talk Volume items are for ring tone and talking volume adjustment
7. Note that all the modifications will be done immediately after the operation. Touch the
exit out the setting.
icon to
12. Specifications
●● Power supply for indoor monitor: DC 15~18V (supplied by Adaptor)
●● Power supply for Door Station:
DC 10~12V (Supplied by Monitor)
●● Power consumption:
Standby 0.5W; Working status 15W (for kits)
●● Monitor screen:
7 Inch color TFT-LCD
●● Display Resolutions:
1,440(R, G, B) x 234 pixels
●● Video signal:
1Vp-p, 75Ω, CCIR standard
●● Picture Memo Capacity:
127 PCS
●● Monitor time:
30 seconds
●● Talking time:
90 seconds
●● Dimensions:
155(H)×225(W)×28(D)mm
-9-
WARRANTY CARD
NB Please keep this document safe, as it is proof of your Warranty
Your Video door system comes with a one year Manufacturers Warranty. When
used normally, the following services are offered:
1. Replacement for malfunctioning parts in first three months
2. Repair free of charge for malfunctioning parts in first year
The following actions will void the Warranty:
1. Damage to the device during installation
2. Damage to the device through misuse
3. Opening and/or disassembling the device
4. Attempting to force the device to perform functions for which it is not intended
5. Attaching the device to power supplies other than thoserecommended by the
manufacturer
Distributor for Warranty purposes:
Intelligent Home Online Ltd
34a High Street
Hornsey
London
N8 7NX
+44 (0)20 83482040
www.intelligenthomeonline.com
Product:_____________________________________________
Purchaser Name: ______________________________________
Invoice N: ____________________________________________
Purchase Date_________________________________________
-10-
The design and specifications can be changed without notice to the user.
Right to interpret and copyright of this manual are preserved.
ST-ENG-IH692MT-V2.2 101S101