Instructiuni de utilizare si instalare Lampa solara pentru gradina

Instructiuni de utilizare si instalare Lampa solara pentru gradina

Instructiuni de utilizare si instalare
Lampa solara pentru gradina SilverCloud SGL02
Inainte de a utiliza lampa solara SilverCloud SGL02, cititi cu atentie acest manual.
Pastrati manualul pentru consultare ulterioara.
Functionare:
In timpul zilei, panoul solar transforma energia solara in energie electrica si incarca
acumulatorul. Pe timpul noptii, lampa solara se aprinde automat folosind energia stocata in
timpul zilei. Timpul de iluminare a lampii depinde de nivelul de incarcare a bateriei care
poate fi influentat de mai multi factori: pozitia geografica, conditiile de clima, anotimp.
Amplasarea corecta a lampii solare
Lampa solara functioneaza cel mai bine atunci cand este amplasata la exterior. Astfel,
panoul solar primeste energie direct de la soare. Daca lampa va fi amplasata in locatii
intunecate, acumulatorul nu se va incarca complet, reducand timpul de iluminare pe timp de
noapte.
Atentionari speciale
Ÿ Pentru a folosi la maxim capacitatea acumulatorului, expuneti lampa la lumina directa a
soarelui pentru cel putin 8 ore pe zi.
Ÿ Asigurati-va ca ati instalat corect acumulatorul, respectand polaritatea.
Ÿ Pentru o functionare corecta, nu amplasati lampa solara in apropierea unui alt obiect
luminos.
Ÿ In conditii de temperatura foarte scazuta, acumulatorul ar putea sa nu se incarce
complet, reducand astfel, timpul de iluminare pe timp de noapte.
Caracteristici
Ÿ Fara fire
Ÿ Usor de instalat
Ÿ Lumina alba
Ÿ Acumulator AAA Ni-MH (300mAh 1.2V) inclus
Ÿ Timp de iluminare pana la 8 ore
Instalare
Ÿ Amplasati lampa LED intr-o locatie in care poate primi lumina directa a soarelui pentru
cel putin 8 ore pe zi. Nu o amplasati in apropierea altor corpuri de iluminat, cum ar fi stalpi
stradali, intrucat s-ar putea sa nu se aprinda pe timpul noptii sau lumina ar putea palpai.
Ÿ Scoateti cu grija lampa solara din cutie.
Ÿ Asigurati-va ca acumulatorul este instalat in mod corect.
Ÿ Nu apasati pe panoul solar, intrucat ati putea deteriora modulul solar.
Ÿ Asamblati partile componente ale lampii solare.
Ÿ Fixati in pamant lampa, apasand usor in jos.
Ÿ Inainte de prima utilizare, acumulatorul necesita cel putin 8 ore de incarcare.
Ÿ Daca acumulatorul este complet incarcat, lampa se va aprinde automat cand conditiile
de lumina scad.
1
Posibile probleme si solutii
Daca lampa nu se aprinde procedati dupa cum urmeaza pentru a localiza defectul:
Ÿ Verificati daca acumulatorul este instalat in mod corect.
Ÿ Verificati daca acumulatorul este incarcat.
Ÿ Acoperiti panoul solar pentru a simula intunericul. LED-ul ar trebui sa se aprinda imediat.
Ÿ Asigurati-va ca lampa, pe timpul zilei, nu este amplasata in locatii ferite de lumina directa
a soarelui.
Intretinere
Curatati periodic suprafata panoului solar pentru a asigura o buna absorbtie de energie. Nu
apasati pe panoul solar in timp ce-l curatati. Pentru curatare, nu folositi solventi.
Pe timpul iernii, curatati panoul solar de zapada, pentru a permite acumulatorului o
incarcare cat mai eficienta.
Inlocuirea acumulatorului
Rotiti abajurul in sens invers acelor de ceasornic si indepartati-l de corpul lampii.
Indepartati capacul si scoateti acumulatorul.
Asigurati-va ca folositi acumulator AAA Ni-MH (300mAh) 1.2V.
Instalati acumulatorul nou, respectand polaritatea.
Puneti capacul la loc peste compartimentul acumulatorului.
Re-asamblati abajurul si corpul lampii.
NOTE:
Acest produs are inclusa o baterie reincarcabila, care asigura functionarea lampii pana la 8
ore.
Acest produs foloseste un bec LED incorporat ce nu poate fi inlocuit.
Detalii tehnice
Alimentare
Consum
Temperatura si umiditate de operare
Clasa de protectie
Intensitate luminoasa
Acumulator 1 x AAA 1.2V 300mAh Ni-MH
~0.06W
-25℃-+65℃ / <85%
IP44
~7 lumeni
2
User manual and installation instructions
Solar post light SilverCloud SGL02
READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
How solar lights works
During the day, the solar panel converts the solar power into electricity and recharges the
battery. At night, solar light turns ON automatically with the electricity stored during the day.
The number of hours of illumination depends on the geographical location, weather
conditions and seasonal lighting availability.
A best location for solar light
Solar light will perform better at an outdoor location where its solar panel can receive direct
sunlight up to eight hours or longer each day. At shadowed locations, the battery will not be
fully charged and the lighting hours at night will be reduced.
Precautions
Ÿ To maximize battery capacity, the solar light should be fully charged by direct sunlight for
eight hours.
Ÿ Be sure battery is securely contacted with the correct polarities.
Ÿ Do not place solar light near a lighted object as the unit may not work properly.
Ÿ Under extremely cold temperatures, the battery may not charge fully. In such cases, the
solar light may not stay illuminated as long.
Features
Ÿ No wiring required
Ÿ Easy to install
Ÿ White LED Bulb
Ÿ Rechargeable AAA Ni-MH battery (300mAh 1.2V)
Ÿ Fully charged battery can provide up to eight hours of light at night
Assembly and operation
Place fixture in a location that gets full sun for at least eight hours. Do not place near light
sources such as streetlights. The light may turn off and flicker.
Ÿ Carefully remove your solar light from the box.
Ÿ Ensure that battery is in place and connected.
Ÿ Do not press on the surface of the solar panel because this can cause damage to solar
module.
Ÿ Attach the solar light body to the shade assembly. Connect one end of the pipe with the
shade assembly, then connect the other end with the spike.
Ÿ Gently insert the solar light into the ground.
Ÿ For the first time use, the solar light requires up to 8 hours or longer of full and direct
sunlight to fully charge the battery.
Ÿ If the battery is fully charged, the light will turn on automatically at nighttime and turn off at
daytime..
Ÿ
3
Troubleshooting
If light does not work, to locate the defect, please follow these steps:
Ÿ Check that the battery is installed correctly.
Ÿ Check that the battery have been charged
Ÿ Cover the solar panel to simulate darkness and LED should light immediately.
Ÿ Ensure the light is not in shade during the daytime.
Maintenance
Periodically clean the top surface of the unit for best solar energy collection. Do not put any
pressure on the solar panel during cleaning. Do not use solvents.
Keep the solar panel free of snow and debris to allow the battery to charge properly.
How to replace the battery
Rotate the solar light body counterclockwise and remove it from the shade.
Indepartati capacul si scoateti acumulatorul.
Open the battery cover and remove the old battery.
Make certain that the new battery is AAA Ni-MH (300 mAh/1.2V) rechargeable.
Install the new battery into the battery compartment. Make certain the battery is placed
according to the correct polarity.
Restore the battery cover back and reinstall the solar light body onto the pipe.
NOTES:
This product is supplied with rechargeable battery, which provides up to eight hours of light
at night.
This product uses non-replaceable white LED bulb.
Technical details
Power
Power consumption
Operating temperature and humidity
Waterproof
Luminous flux
1 x AAA 1.2V 300mAh Ni-MH battery
~0.06W
-25℃-+65℃ / <85%
IP44
~7 lumen
4