Enzyme MPC Super Pick Up Super Pick Up Super Pick Up

Enzyme MPC
(works on odors…right from the source)
PCE Enzyme MPC provides stain removal and long term odor control. PCE
Enzyme MPC contains our exclusive ProAction Bacterial P.A.B. which
dispenses free enzymes that quickly and continuously neutralize lingering
odors and organic stains. Specifically designed to be effective on pet odors,
food spills, vomit, urine, sewage, and perspiration. PCE Enzyme MPC
prevents the return of persistent malodors by removing the source of the
odor. PCE Enzyme MPC deep-cleans by penetrating the pores of surfaces
such as wood, concrete, plastics, tile and grout.
the
stuff
you
here’s how to use it...
For Stains, remove as much excess solids as possible. Apply full strength to
affected area until saturated. With a moist cloth, gently work into affected area
to break up any solids. Leave product up to 20 minutes to allow the P.A.B. to
penetrate the stain. Rinse with water, blot or pick up with wet vac. Safe to use
with household carpet extractors, simply use PCE Enzyme MPC in place of normal
extraction products. Always, pretreat as above and final pick up with clear water.
For surface cleaning mix 1 part PCE Enzyme MPC with 2-4 parts water
depending on the affected area. Apply this mixture to the affected a((9(rea leave
for 20 minutes or more. Repeat daily until odors are gone. Rinse with water.
For kennel runs and cages follow directions above and/or PCE Enzyme
MPC can be used with a hose end portioning sprayer. (Available at most
hardware stores). Simply, pour PCE Enzyme MPC full strength into reservoir,
apply to affected area, leave for 20 minutes or more. Then rinse.
need to
Skunk Shampoo is recommended by top
Breeders, Groomers and Veterinarians.
Super
Pick Up
(it comes in 1L, 4L, and a convenient 20L no-glug cube)
available from:
(super picky uppy stuff)
PCE Super Pick Up instantly binds & absorbs urine, diarrhea, vomit, etc.
(any water based solution) to make for easy clean-up.
• Neutralizes acids and odors instantly/reduces staining.
• Safe for most carpet and other floor coverings (do test patch in an
inconspicuous area before use).
here’s how to use it...
1. As soon as possible after spill sprinkle product sparingly over
affected area.
2. Wait 2 minutes for product to absorb liquid.
3. Scoop or sweep up and dispose in waste receptacle or FLUSH DOWN
TOILET (biodegradable). If product is used on carpet use stiff brush to
remove from carpet fibres and dispose same as above. If stain is dry on
carpet or fabric re-hydrate with warm water. Follow Steps 1-3.
PCE products are proudly made in Canada by
Armstrong Manufacturing Inc.
866-627-6588
www.armstrongmanufacturing.com
clean
your pets
(and all the things they make dirty)
Skunk
Sku
k nk Shampoo
ku
(it’s not for the skunk, it’s for everything that got too
close to the business end of that stinky critter)
PCE Skunk Shampoo is a mild fragrant shampoo containing
ingredients scientifically developed to completely deodorize skunk
odor/tomcat’s spray. Money Back Guarantee
here’s how to use it...
To deodorize sprayed dogs, cats, etc., apply equal portions of both PCE
Skunk Shampoo and warm water ONTO DRY COAT. Use enough PCE
Skunk Shampoo to produce generous lather that penetrates pet’s coat
completely. PCE SKUNK SHAMPOO MUST CONTACT SKUNK SPRAY. When
lathering is complete, bathe in lukewarm water. Reapply if necessary.
Works Instantly On:
•Cars •Farm Vehicles •Floors •Walls •Carpeting •Clothing •Ferrets
•Any surface that comes in contact with skunk or tomcat spray
Mix equal parts PCE Skunk Shampoo and water, spray affected areas,
allowing mixture to penetrate. Leave for 10 minutes or more, rinse and
reapply if necessary.
Powder
Powder
Deodorizer
Deodorizer
MP
MP
Surface MPD
(smells great, works even better, you’ll want to use
it everywhere!)
PCE Surface MPD combines a fresh fragrance with the power of ProOdor
Control P.O.C. PCE Surface MPD’s unique formula is not a masking agent or
cover-up perfume. Surface MPD actually filters out bad odors and allows
pleasant scents through.
here’s how to use it...
Kennels/Dog Runs
• For general area deodorizing use 1 ounce PCE Surface MPD to 1 gallon
water and distribute evenly over area. Non-irritating to animals when
used as directed.
• Or 1 ounce to diluted bleach solution for cleaning/disinfecting hard
surfaces, use usual precautions.
Indoor Pet Areas
• Mix 1 part PCE Surface MPD to 10 parts water and mist or spray lightly
on furniture, drapes etc. to eliminate that DOGGY ODOR! (non-staining
when used as directed).
• Add 1 ounce PCE Surface MPD to laundry to eliminate pet and other
unwanted odors.
• Spray directly on kitty litter to keep litter area fresh and odor-free.
Other Areas Of Use
• Carpet Cleaning Equipment • Kitchen
• Washroom Areas • Waste Receptacles
May also be added to other general cleaning and disinfecting products to
clean and deodorize in one easy step.
(a little sprinkle goes a long way)
Deodorizing
Shampoo MP
PCE Powder Deodorizer MP is a multi-purpose odor neutralizer that will
not harm or damage the working parts of your vacuum.
(now your pets are going to be
clean AND smell good!)
ODOR CONTROL with these additional benefits:
• REDUCES static electricity
• SAFE for all carpets
• DEODORIZES vacuum cleaner
• CLEANS by collecting dust and dirt; makes vacuuming effective
• INNOCUOUS when used as directed
here’s how to use it...
Litter Trays
• Sprinkle in trays prior to putting in kitty litter.
Carpets (4-2 oz. per 100 sq. ft.)
• Sprinkle lightly, (no need to cover entire carpet).
• Leave three minutes.
• Vacuum.
Garbage Bins:
• Sprinkle in container prior and during use.
PCE Deodorizing Shampoo MP is a rich-foaming, “conditioning” shampoo
that has been purposely formulated to be non-irritating to the skin and
eyes. This unique cleansing system contains a perfect balance of “natural
source” ingredients to help keep your pet’s coat in top condition. There is Aloe
Vera Extract to soften and condition the coat, and wheat germ oil to help give
a healthy shine. In addition, PCE Deodorizing Shampoo MP contains our
exclusive ProOdor Control P.O.C. which not only works to eliminate any
unpleasant odors but will keep your pet smelling fresh for days.
here’s how to use it...
Mix 1 part shampoo to 8 parts water
• Starting behind the ears and working towards the tail apply diluted
shampoo directly to coat and work into a rich lather. (Do not pour directly
into pet’s eyes).
• Rinse thoroughly
•Towel dry and brush coat
• Procedure may be repeated for larger pets or problem odors.
Deodorizing MPC
(the stuff to use when you want it really
clean…and smelling good too!)
PCE Deodorizing MPC is a highly concentrated all purpose cleaner that has
been specially formulated to work at a neutral pH. This unique heavy duty
cleaner will remove the toughest types of soil yet is very mild to the skin.
Based upon a fast-wetting non-ionic system. PCE Deodorizing MPC is
excellent for all types of general cleaning; floors, walls, woodwork, windows,
countertops, porcelain, tile etc. …Because PCE Deodorizing MPC has a
neutral pH, it will not remove the wax shine from floors like most alkaline
cleaners do. And, PCE Deodorizing MPC contains our exclusive ProOdor
Control P.O.C. that keeps areas smelling fresh and clean for hours after use.
PCE Deodorizing MPC is biodegradable, innocuous and phosphate free.
here’s how to use it...
General Cleaning – 1-2 oz. per gallon of warm water for cleaning for
floors, walls, painted surfaces etc.
Heavy Duty Cleaning – Use 4 oz. per gallon of water.
Windows – Use 1/2 oz. per gallon of water.
Spot & Stain MP
(for everyone who’s pets should be
named “Spot” or “Stain”… this one’s for you!)
PCE Spot & Stain MP has been specially formulated to dissolve and
remove tough stains such as pet urine, food stains, grease, vomit and many
types of ink and paint. This water-based formula contains a safe but very
active “natural source” solvent (D-Limonene) which works much better than
the toxic mineral spirit solvents used in the past.
PCE Spot & Stain MP also contains two fast acting wetting agents that help
to penetrate tough soils in seconds. This results in faster stain removal and
extra safety for the applied surface.
PCE Spot & Stain MP has a neutral pH. It contains no phosphates, borates,
alkalis, or other material that may be harmful to our environment.
PCE Spot & Stain MP is safe to use on most types of fabric or carpeting,
however, it should be tested first on a small inconspicuous area.
here’s how to use it...
For best results apply when stain is as fresh as possible.
• Saturate spot area with PCE Spot & Stain MP
• Wait 1-2 minutes
• Agitate area with stiff brush from centre to outer edges to create foaming
• Blot with paper towel or sponge
• Rinse area with cold water
• When dry, brush and vacuum. Repeat for old or more difficult stains.