We Use Nothing But The Highest Quality

We Use Nothing But The Highest Quality
Products Throughout Our Whole Design
And Build Process.
In the manufacturing business, quality materials are extremely
important. When cheap resins and fillers are used in designing
parts, the parts move and slightly change shapes before you even
take a mold off of them. These effects can multiple throughout the
entire manufacturing process. For example, when you use those
same cheap products to make your molds from the original part, the
molds will move around on you. And again when you use the cheap
materials to make your parts in the mold, then your finish part will
move around as well only multiplying the shitty fit by three times.
These imperfections in the finish parts will end up costing you more
in body work to make them fit. More body work will result in more
labor hours. Cheaper resins and materials = cheaper parts. The
reason other companies use these cheap materials is they cure fast.
The faster they cure and the less the materials cost, the cheaper they
can make parts. You have seen these parts, bags that are warped
so bad lids don’t fit and don’t even look the same from left to right,
and side covers that don’t fit up to the frame and won’t even fit plush
to the bags. We highly recommend before you buy any companies
parts that you do your research and find out how much money you
will spend in body work. Speed By Design is confident that you will
save money on the body work when you use our products.
Don’t be fooled by the guys that do this
only to increase their margins.
At Speed by Design this does not fly. We use high grade resins with
less styrene which equals less shrinking and longer cure times but
much straighter parts. Fact is we spend much more time tooling them
and spend more money building them. So it saves you time and
labor on your build. You will also get the longevity in these parts,
they will be less likely to change shapes, crack, or blister down the
line. Our parts will fit like we say they do or you simply return
them for a full product refund.
I am Coby Klein and you will not find a higher quality product on the
market. We do not cut corners. Our team and I will always give you
our best work, we are proud of what we do. We will always give you
the personal service you deserve and answer the questions you
have, we answer the phones and do not avoid them.
Again For Any Reason If Our Parts Don’t
Fit Like We Say They Do Then Simply
Return For A Full Product Refund.
Please don’t hesitate to contact us when you are ready to make
your next purchase or if you have any questions or concerns. Be
sure to think of us during your next build. Please feel free to refer
to our website for more information.
With respect,
Coby Klein
Owner of Speed By Design
Long Baller Rear End . . . . . . . . . . . . . . . . . . . . . . . 3 - 4
Crazy 8 Lids + Low Life Side Covers . . . . . . . . . . . 5 - 6
2 Hole, 3 Hole, Venom Chin Spoiler . . . . . . . . . . . 7 - 8
Straight Up Center Stand . . . . . . . . . . . . . . . . . . . . 9 - 10
Get Down Air Ride + Tanks and Fenders . . . . . . . 11 - 12
Neck Rake Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 14
Big Baller Rear End . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 16
Big Bagger Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 - 18
Sound Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 20
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 - 22
Apparel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 24
Follow Us + At The End Of The Day . . . . . . . . . . . . 25 - 26
You Won’t Find A Longer,
Better Looking Set Of Bags
On The Market.
Pre-Drilled!
Year ModelPN#:
2009 Thru 2013 SBD-LBRE-0913
1997 Thru 2008 SBD-LBRE-9708
The best direct replacement there is.
The bags are 6 inch down and 14.5 back
and have added steer ability over 8
inch bags. They come pre-drilled and
truly bolt right on your bike minus some
paint work.
Sick Body Lines...
6” Down
and
14.5” Back
Stretched To
Perfection
Urethane Seat Pan
Urethane License Plate
Bezel Included
Cat Eye LEDs
- Optional
PN# SBD-LBRE--LK
2009 Thru 2013 PN# SBD-LBRE--SP-0913
License Plate Light
1997 Thru 2008 PN# SBD-LBRE--SP-9708
PN# SBD-LBRE--PL
Customers have the option to purchase
a set of cat eye LED taillights that come
complete with a LED license plate light
(that is recessed in the license plate
bezel) and a urethane seat pan.
Bike courtesy Joey Beam of Vindictive Wayz “The Godfather”
*Crazy 8 Lids and Low Life Side Covers Not Included.
Tyler Coletta of Kaotic Designs
Custom Road King
*Crazy 8 Lids
and Low Life
Side Covers
Not Included.
Our Best Seller!
Year Model
PN#:
1997 to Current SBD-CRZ8-JL
Pre-cut for JL Audio 7.7 Speakers
1997 to Current SBD-CRZ8-KA
Our Crazy 8 Speaker Lids easily fit your stock 1997 to 2013 Harley Davidson
bags. The lids are manufactured with nothing but the highest quality
materials by process of Urethane Injection. The Crazy 8 Speaker Lids is
recessed to fit your 8” diameter speaker seamlessly. The Crazy 8 Speaker
Lids are available with or without speakers.
Pre-cut for Kicker KM8 Speakers
8”
6”
4”
Lids + Speakers Options:
Complete with Crazy 8 Lids and
JL Audio 7.7 inch (M770-CCX-SG-TB)
(PN#: SBD-CRZ8-JL-W)
or
Complete with Crazy 8 Lids and
Kicker KM8 8 inch (KAKM8)
(PN#: SBD-CRZ8-KA-W)
Our Real Flared
Side Covers
Fit Perfectly And
Snap Right On.
Photo courtesy of Tracey Fields of All In All Customs
Joey Beam of Vindictive Wayz
“The Godfather”
Jason Carragher’s Road Glide
Year Model
PN#:
1997 Thru 2008
SBD-LLSC-9708+4, +6, and +8
2009 Thru 2013
SBD-LLSC-0913+4, +6, and +8
No BULL SHIT grinding, glueing, or bonding. These covers pop
right on. Available in 4, 6, and 8 inch stretch. We will even
show you the inside of our side covers. If they don’t fit like
we say they do, then simply return for a full product refund.
Also, these side covers don’t fit with Top Shop Bags and True
Dual Exhaust.
Note - We recommend purchasing side covers longer...
You can always shape them into the bottom of your bags.
Just know you cannot make them shorter than 4” stretch.
Tyler Coletta of Kaotic Designs Custom Road King
Venom Chin Spoiler
Year ModelPN#:
2 Hole Chin Spoiler
Year ModelPN#:
2014 to Current SBD-VCS-14UP
2014 to Current SBD-2HC-14UP
2009 to 2013 SBD-VCS-0913
2009 to 2013 SBD-2HC-0913
1997 to 2008 SBD-VCS-9708
1997 to 2008 SBD-2HC-9708
Manufactured by process of Urethane Injection.
Manufactured by process of Urethane Injection.
Bike Must Be Raked
Bike Must Be Raked
Factory Oil Cooler - NO PROBLEM
Factory Oil Cooler - NO PROBLEM
Does not fit Fan Assisted Oil Cooler
Does not fit Fan Assisted Oil Cooler
Requires minor fitting
Requires minor fitting
3 Hole Chin Spoiler
Year ModelPN#:
2014 to Current SBD-3HC-14UP
2009 to 2013 SBD-3HC-0913
1997 to 2008 SBD-3HC-9708
No rake needed up to 21” wheel plus tire,
and Hugger wrap around Fender
Rich Dylan’s
Road Glide
Factory Oil Cooler - NO PROBLEM
2 Hole Chin Spoiler
3 Hole Chin Spoiler
Does not fit Fan Assisted Oil Cooler
Requires minor fitting
Be sure to take the
time to check out our
measurement guide for
fitment specifcations
before placing your
order.
Be sure to take the
time to check out our
measurement guide for
fitment specifcations
before placing your
order.
Venom Chin Spoiler
w/ Wire Mesh
Desparado Harley Davidson
Scottie Sanford’s Street Glide
Will Hendricks Street Glide
Straight Up Electric
Billet Center Stand
Straight Up Electric
Billet Center Stand
Year ModelPN#:
Year ModelPN#:
2009 to Current SBD-CS-09UP
2000 Thru 2008 SBD-CS-0008
Must have a minimum of rear air ride
Must have a minimum of rear air ride
Does not work with factory crossover exhaust
Does not work with factory crossover exhaust or
aftermarket undercarriage stabilizer
If you have Legend Air Suspension, you will need to
relocate your air compressor
All billet aluminum comes ploshed and anodized black
If you have Legend Air Suspension, you will need to
relocate your air compressor
All billet aluminum comes polished and anodized black
Rick Robert’s Road Glide
Rear Air Ride
Year ModelPN#:
Custom 6.5 Gallon Tank
1997 to Current SBD-GDARK-R
Year ModelPN#:
2007 and Earlier SBD-CGT-0208
The Kit Includes:
2008 Thru 2016 SBD-CGT-09UP
(2) Air shocks + Zinc Plated Mounting Bolts
Solenoid air control valve
DOT- approved lines and fittings
Harness with switch
Air compressor
Hardware
Custom 6.5 Gallon Tank
Notice No Dash and No Fuel Gauge
Flush Fuel Fill
Fuel Pump Location Installed
through Bottom
Zip Ties
Pump Not Included
Why Buy From Us?
Professionally designed and built Plug
and Play wiring harness. Completely
ceiled and shrunk. Shocks have custom steel
bushings which are zinc plated for corrosion
and long life. We also use a high pressure
Solenoid so it doesn’t leak while you’re
riding. Relocated the air fittings that comes
up the shock and installed a push connect
5/32” fittings. All lines and fittings are DOT
approved so you can count on them.
Get Your Bagger
Down With
Speed By Design!
y of
urtes
ng co mance
i
K
d
Roa n Perfor
r
Easte
Front Air Ride
Big, Wide And Dashless
Bagger Tank With Flush
Fuel Fill For Those Of You
That Still Have A Little
Chopper In You.
Yaffe Stretch Tank
Year ModelPN#:
1997 Thru 2013 SBD-GDARK-F-9713
2014 Thru 2016 SBD-GDARK-F-14UP
Year ModelPN#:
2007 and Earlier PYO-STK-07
2008 Thru 2016 PYO-STK-08
The Kit Includes:
(2) Air pistons
Harness with switch
Custom 6 Gallon Steel Tank
Rubber Bump Stops
Air compressor
Flush Fuel Fill
Solenoid air control valves
Hardware
DOT- approved lines and fittings
Zip Ties
Hugger Fender
Part Number: FL-107 - 30”, FL106 - 26“,
FL105 - 23”, & FL140C - 21”
Wrap-around fender
Pre-drilled
FL Model fenders include chrome spacers
and hardware.
Classic Fender
Part Number: FLC-107 - 30”, FLC106 - 26“,
FLC105 - 23”, & FLC140 - 21”
13 gauge Steel
Classic Harley tail and front cut
Includes chrome billet spacers and pre-drilled holes
Custom Road King
Tyler Coletta of Kaotic Designs
Be sure to let us know your year and model when ordering your new fender.
American Suspension Neck Rake Kits
Weld On Neck Rake Kit
30”
Year ModelPN#:
2014 to Current SBD-WNK30-14UP
2009 to 2013 SBD-WNK30-0913
1997 to 2008
SBD-WNK30-9708
HHI Neck Rake Kits
Short Neck Builders Kit
26”
Year ModelPN#:
2014 to Current SBD-WNK26-14UP
2009 to 2013 SBD-WNK26-0913
1997 to 2008
SBD-WNK26-9708
For your 26” and 30” Wheel. The Neck Rake Kits are 100% machined pocketed billet
steel. The short neck kits have internal wiring chase. And they are sold complete
with trees and extenders. 10 degrees.
Keeps neck low with close to stock brake. Finished bike will have perfect trail.
30”
Year ModelPN#:
2014 to Current NRBK9S-12-14
2009 to 2013 NRBK9S-12-09
1997 to 2008
NRBK9S-12-08
26”
Year ModelPN#:
2014 to Current NRBK7S-9-14
2009 to 2013 NRBK7S-9-09
1997 to 2008
NRBK7S-9-08
HHI Short Neck Rake Builders kit for 26” and 30” wheel
custom applications. Reduced length neck.
Optional Plate
Bolt On Neck Rake Kit
30”
Year ModelPN#:
2014 to Current SBD-BNK30-14UP
2009 to 2013 SBD-BNK30-0913
1997 to 2008
SBD-BNK30-9708
26”
Year ModelPN#:
2014 to Current SBD-BNK26-14UP
2009 to 2013 SBD-BNK26-0913
1997 to 2008
SBD-BNK26-9708
For your 26” and 30” Wheel. The American Suspension
Bolt on Neck Kit is designed for quick and easy installation
with a focus on strength and stability. The full kit includes
- Neck, Stem, Trees, Bushings, Fork Caps, and Bearings.
The American Suspension Bolt on Neck Kit for Harley
bagger motorcycles gives great handling because the
geometry is very similar to a weld on kit.
Rake It
And Put
A Big
Wheel On It...
The 30” Kit includes a 9 degree neck piece, and 12 degree
trees. The 26” Kit includes a 7 degree neck piece and 9
degree trees. Both kits include a template, appropriate
extensions, and directions.
Neck Rake Builders Kit
30”
Year ModelPN#:
2014 to Current NRBK-9-12-14 (9 degree)
2009 to 2013 NRBK-9-12-09+2 (9 degree)
1997 to 2008
NRBK-9-12-08+2 (9 degree)
26”
HHI now offers a weld-on replacement neck section
for bagger/touring models. This piece provides
correct frame geometry for installing a 23”, 26”, or 30”
wheel when installed with our FL raked triple trees.
Trees are available in machine or black anodized
finish. We provide this as a kit with our trees and
correct extensions / inserts for the applications listed
in the options below. Other parts mentioned below
are sold separatley. Trees work with all 1987 and up
Bagger/ touring models with standard late model
ignition location. 2014 and up kits are now available
for all touring models.
Year ModelPN#:
2014 to Current NRBK-7-9-14 (7 degree)
2009 to 2013 NRBK-7-9-09+1 (7 degree)
1997 to 2008
NRBK-7-9-08+1 (7 degree)
2014 to Current NRBK-9-9-14 (9 degree)
2009 to 2013 NRBK-9-9-09+1 (9 degree)
1997 to 2008
NRBK-9-9-08+1 (9 degree)
Big Baller Rear End
Year ModelPN#:
2009 to Current SBD-BBTB-09UP
Bags w/ built in Side Covers
6.5 Gallon stretch dashless tank with recessed fuel fill
Super Impressive!
Showstopping Bags!
Rear fender w/ Built in Bag Fillers (not an overlay, a real
fender) - Notice, it covers all hardware
Tandem seat - Seat ready for your custom upholstry
Bag Lids and Electric Billet Hinges
License Plate Frame
LED Tail Lights
Plug and Play Wiring Harness
Billet Bagger Electric Hinges
For more information please flip to page 21
Joey Pemberton of East
Coast Bagger’s Road King
- Notice Joey stretched
the bags another 4”.
Kicker KM8
Part Number: KM8
8 inch speakers
Spectacular highs and midrange sounds.
Multi-color LED lights that can be
changed at your preference.
Ahead of the Curve
PN#: SBD-CRZ8-JL-W
The KMLC remote allows you to
customize your LED lighting to
get the perfect look for your
bagger (optional).
Complete with Crazy 8 Lids
and Jl Audio (7.7”) Speakers
JL Audio M-Series - 7.7 inch
KMLC LED Lighting Remote
Grills come in charcoal or white
PN#: SBD-CRZ8-KA-W
PN# KA-KMR
Available in 2 Ohm or 4 Ohm
models
Complete with Crazy 8 Lids
and Kicker KM8 (8”)
Speakers w/ LEDs
Part Number: M770-CCX-SG-TB
M-Series 7.7-inch Marine Cockpit Coaxial System for
Infinite-Baffle Use (100 W, 4 Ω) - Titanium Sport Grille
Joey Beam of
Vindictive Wayz
“The Godfather”
JL Audio Amplifiers
Part Number: JL-MHX300/1
Monoblock Class D Full-Range Amplifier, 160 Watts x 4 @ 4 ohm / 300
Watts x 1 @ 2 ohm - 14.4V
Water resistant and corrosion resistant
JL Audio Amplifiers
Part Number: JL-MHX280/4
4-channel Class D Full-Range Amplifier, 50 Watts x 4 @ 4 ohm / 70
Watts x 4 @ 2 ohm - 14.4V
Water resistant and corrosion resistant
Output is about 35% higher than any other amplifier on the market
Height (H) 1.77 in / 45 mm
Depth (D) 3.09 in / 78.5 mm
Width (W) 8.66 in / 220 mm
Net Weight 3.18 lb / 1.44 kg
Output is about 35% higher than any other amplifier on the market
Height (H) 1.77 in / 45 mm
Depth (D) 3.09 in / 78.5 mm
Width (W) 8.66 in / 220 mm
Net Weight 3.18 lb / 1.44 kg
Kicker
PXA200.1 Amplifier
Kicker
PXA200.2 Amplifier
Part Number: KA-PXA2001
Part Number: KA-PXA2002
200 watts RMS x 1 channel into a 0.5-Ohm load
50 watts RMS x 2 channels into a 2-Ohm load
Bass boost +6 dB at 60 hertz
Full-range amp draws less than 10 amps at max output
Only 2” high, 3-1/2” wide and 4-3/4” long
Only 2” high, 3-1/2” wide and 7” long
Solution For Ipod® Or Iphone® Users To Easily Add Tunes
Kicker PXiBT50.2 Amplifier
Part Number: KA-PXI
RMS Output @ 2 Ohms 25 watts X 2
Signal-to-Noise Ratio 90dB
RMS Output @ 4 Ohms 15 watts X 2
Max Current Draw 10A
Frequency Response 20Hz – 20kHz
(+/- 1dB)
RCA Pre-Out Voltage 2.5V RMS
Aux-Input Sensitivity 500mV to 1.75V
iPod Charging 5V @ 1A
Run, Brake and Turn Wiring Harness
Billet Baller Electric Hinges
Part Number: SBD-RBT-1
Part Number: SBD-BDBH
Wiring Harness
Single Switch
Made from billet aluminum and assembled by hand in house.
For custom installation - bags will need modification.
This item is custom made to order. The sale is final!
No exchanges or refund.
Part Number: SBD-97UP-BHHsw
Part Number: SBD-BHK
The kit includes, (2) electric billet
hinges, (2) hinge adjusters, and
single switch wiring harness.
Trask Road Glide
Hidden Fairing Bracket
Hinge Adjusters
Part Number: SBD-HA
If you’re bike isn’t already
equipped for LED Run Brake And
Turn, then you might consider our
truly plug and play harness and
module. The kit comes complete
with deutsch connectors at each
bag for easy removal.
Billet Cam Cover
Part Number: SBD-01UP-BCC
Ducktail Fender Flair
Billet Derby Cover
Part Number: SBD-DT2630
Trask Road Glide
Down & Out Bracket
Part Number: SBD-99UP-BDC
Road Glide
Fairing Mount
SBD Teathers
Part Number: SBD-TEATHER
Road Glide Engine
Guard Eliminator Kit
Trask Touring
Turbo System’s
02’ - 14’
This system is designed as a bolt on for the
stock Harley Davidson engine.
No need to modify the engine.
Torpedo Lower Leg Kit
41 mm Bomber Front End
Medieval Cross T-Shirt
Red Hostile T-Shirt
Medieval Cross Tank
Black Hostile T-Shirt
M, L, XL, 2X, 3X
$19.95
Exclusive Speed By Design Clothing
L, XL, 2X
$19.95
SBD Hats
Flex fit
Sizes (6 7/8 - 7 1/4), (7 1/4 - 7 5/8)
$24.95
Black Hostile Hoodie
L, XL, 2X
$34.95
Girls White Tank
XS, S (No artwork on back)
$18.95
Girls White Tank
XS, S (No artwork on back)
$18.95
M, L, XL, 2X, 3X
$19.95
M, L, XL, 2X, 3X
$19.95
@
Shop
Online
speedbydesign.net/apparel.php
*Prices subject to change without notice.
Stay up to speed with Speed By Design!
Be sure to share, tag, or send us pictures of your bagger sportin our product!
www.speedbydesign.net