Catalogue - Dremel Newsroom

Catalogue
2012
Available from:
Robert Bosch (Australia) Pty. Ltd.
Robert Bosch (New Zealand) Pty. Ltd.
1555 Centre Road
Clayton Vic 3168
Phone:
Fax:
Phone:
Fax:
www.bosch.co.nz
1300 30 70 44
1300 30 70 45
0800 543 353
0800 428 570
www.bosch.com.au
F005XC0012
Printed in Australia
KRD 5/2012 – RB 2678 D
While every care has been taken in the preparation of this publication, Bosch does not warrant the accuracy or completeness of the information in this publication and accepts no
responsibility for any errors or omissions. Bosch reserves the right to alter specifications and product range without notice. To the extent permitted by law, Bosch excludes all liability,
including negligence, for any loss incurred in reliance on the contents of this publication.
Contents
2
Versatile Tool Systems 4
Cutting 35
Rotary Tools
6
Sanding 38
Tools 8
Collets / Mandrels / Miscellaneous 40
DREMEL® 3000 Series 8
Accessory Kits 42
DREMEL® 4000 Series 10
Rotary Attachments
49
DREMEL® 10.8V Lithium-Ion 12
Attachments to Reach 50
DREMEL® StylusTM Lithium-Ion 14
Attachments to Rout 50
DREMEL® Multi-MaxTM 16
Attachments to Sharpen 51
DREMEL® TrioTM
18
Attachments to Cut 51
DREMEL® Saw-MaxTM 20
Attachments to Plane 52
DREMEL® VersatipTM 22
Attachments to Control
52
Accessories 24
Attachments to Saw
53
EZ LockTM 26
Rotary Tool Hints and Tips
54
Carving / Engraving / Routing 28
Icons
56
Grinding / Sharpening 31
Projects
58
Cleaning / Polishing 33
DREMEL – Range Catalogue
3
Versatile Tool Systems
Rotary
Rotary
Want to know more about Dremel Rotary Tools?
The Dremel rotary tool is more versatile than any
tool you’ve ever owned. With more than 150 available
accessories and attachments, you can use it to cut, sand,
shape, drill, grind, polish, rout, etch, clean and more.
There is truly no limit to the amount of projects you can
complete with Dremel rotary tools.
Oscillating
A compact, yet full-featured multi-tasking tool, the
Multi-Max moves from side to side at high speeds in
3-degree arcs to undertake a wide variety of tasks from
sanding and cutting to scraping and grinding. It offers
many different accessories to help both do-it-yourself
enthusiasts and professionals repair, remodel and
restore with ease.
Specialty
can this QR code with your phone for product info, project videos
S
and more information on other tools in the Dremel line-up.
You will need QR code reading software or an app suitable for your phone.
Don't have a code reading phone?
Direct your mobile browser here: http://m.dremel.com/8000
Oscillating
Want to know more about Dremel Oscillating Tools?
Scan this QR code with your phone for product info, project videos
and more information on other tools in the Dremel line-up.
You will need QR code reading software or an app suitable for your phone.
on't have a code reading phone?
D
Direct your mobile browser here: http://m.dremel.com/8001
Specialty
Want to know more about Dremel Specialty Tools?
Specialty tools allow do-it-yourselfers to perform the
functions of many specialized tools in just one, versatile
package. Specialty tools offer the ultimate in versatility,
ergonomics, and innovation. Tackle multiple materials,
multiple applications, and multiple projects. Whatever
your DIY project demands, specialty tools will provide.
4
DREMEL – Range Catalogue
Scan this QR code with your phone for product info, project videos
and more information on other tools in the Dremel line-up.
You will need QR code reading software or an app suitable for your phone.
on't have a code reading phone?
D
Direct your mobile browser here: http://m.dremel.com/8002
5
Rotary Tools
Dremel is the inventor of the famous high speed rotary tool system which you can use for a great number of projects
where precision is required, both indoor and out:
»» DIY-projects: like fixing a hinge of a door, or sanding parts of a wooden swing.
The Dremel system consists of three components:
A
»» Hobby projects: like making model planes, or fixing parts of your classic car.
»» Creative projects: like engraving glass, wood or other materials.
The possibilities with the Dremel system are almost infinite. With your Dremel you become the expert in handling
projects with great detail and in hard to reach places. Whether you are an experienced craftsman working with great
care on details of a car or model plane, or a beginner, taking on hobby projects, the Dremel system is perfect for
anyone looking for precision and a wide variety of possibilities.
The innovative Dremel System has developed into a great range of tools and over 150 accessories
and attachments.
In this brochure the Dremel system will be explained, helping you find the right tools,
attachments and accessories for every project.
Tool
A Dremel rotary tool
combined with the right accessory
allows you to reach the perfect result
in all applications. Its variable high
speed makes it possible to carve,
engrave, rout, sharp, grind, clean,
polish, cut and sand all kinds
of materials.
B
Accessories
Dremel® offers you a wide
variety of high quality accessories
for different applications. They are
colour-coded to help you select the
right accessories for your jobs. No
matter which materials you want to
work with, Dremel® has a solution
for you.
C
Attachments
With Dremel® attachments
you can do your job with even more
precision and ease. Dremel® offers the
versatility you need to easily reach the
hardest places, find the best position
to work and fix any object by setting
up a workstation at home.
Dremel has created a number of high speed rotary tools, corded as well as cordless. Every tool has specific features
that makes it unique in its class. Dremel has developed each tool to meet the highest quality standards and optimize
your enjoyment and comfort while working.
DREMEL® 3000 Series (3000-1/26)
DREMEL® 3000 Series (3000-2/30)
DREMEL® 4000 Series (4000-3/36)
DREMEL® 4000 Series (4000-4/50)
A
DREMEL® 10.8V Lithium-Ion (8200-1/34)
B
C
6
DREMEL – Range Catalogue
DREMEL® StylusTM Lithium-Ion (1100-25)
7
DREMEL® 3000 Series
Rotary
2
3
YEAR
4
YEAR
5
YEAR
360° Grip Zone
360º grip zone with soft grip and superior ergonomics
for comfort and control.
YEAR
Limited
Warranty
Variable Speed
Enhanced switch design for easier speed
adjustment.
High Performance Motor
Insulating air gap between motor and housing
to eliminate direct heat transfer to hand.
Replacable brushes
Replaceable brushes
for a longer lifetime.
Ventilation
More efficient fan design to keep the tool
running cool under tough applications
and in any grip position.
DREMEL® 3000 Series (3000-1/26)
Carving /
Engraving /
Routing
191
191
Grinding /
Sharpening
Grinding /
Sharpening
Order information
DREMEL® 3000 Series (3000-2/30)
541
932
932
Order information
Order number: F0133000PN
84922
Order number: F0133000PM
Cleaning /
Polishing
Cleaning /
Polishing
0
80596
03078
403
0
428
414(2)
421
420(5)
426
561
407
150
408
401
Attachments
421
428
420(2)
426(2)
561
429
8
710364
056941
432(2)
402
445(2)
407
Collets /
Mandrels /
Misc.
401
408(2) 411(3)
412(3)
413(2)
432(2)
445(2)
402
Attachments
Cutting Guide
DREMEL – Range Catalogue
414
Sanding
Sanding
8
429(3)
Cutting
Cutting
Collets /
Mandrels /
Misc.
Dremel 3000
130
5,000 – 32,000
0.62
F0133000PM / F0133000PN
Contents
Contents
Carving /
Engraving /
Routing
Specification
Input Power (W)
Variable Speed (rpm)
Weight (kg)
Part Number
Cutting Guide
Flexible Shaft
9
DREMEL® 4000 Series
2
YEAR
Rotary
3
YEAR
4
5
YEAR
Electronic Feedback
Maintains speed under load.
YEAR
Variable Speed
Limited
Warranty
Does it All, Better.™
For greater versatility.
Controls do not interfere with grip.
Separate On/Off Switch
Retains speed setting for ease of use.
Quick Collet Lock
For fast accessory changes.
Pencil Grip
Close to bit.
360º Grip Zone
High-Performance Motor
With soft grip for comfort
and control.
For maximum performance
at all speeds.
DREMEL® 4000 Series (4000-3/36)
Order information
Order number: F0134000ND
109
Carving /
Engraving /
Routing
191
932
8193 84922
DREMEL® 4000 Series (4000-4/50)
194
932
8193
84922
Cleaning /
Polishing
403
8
405
428
428
442
421
414
(3)
429
420
(4)
EZ409 EZ456 EZ476 540
(2)
(2)
(2)
561
511E
512E 407
710364
052028
423E
Cutting
Cutting
420
(4)
426
(3)
561
Sanding
Sanding
407
150
408
(4)
402
432
(4)
445
(2)
411
(2)
412
(2)
413
(2)
481
Collets /
Mandrels /
Misc.
150
401
402
408
(2)
432
(2)
EZ402
481
445
(2)
411
(2)
412
(2)
413
(2)
Attachments
Attachments
Cutting Guide
DREMEL – Range Catalogue
191
Order information
Order number: F0134000NJ
541
(2)
541
Cleaning /
Polishing
10
107
Grinding /
Sharpening
Grinding /
Sharpening
Collets /
Mandrels /
Misc.
Dremel 4000
175
5,000 – 35,000
0.55
F0134000ND/F0134000NJ
Contents
Contents
Carving /
Engraving /
Routing
Specification
Input Power (W)
Variable Speed (rpm)
Weight (kg)
Part Number
Flexible Shaft Sanding & Grinding Guide
Cutting Guide
Flexible Shaft
Sanding & Grinding
Sharpener
Guide
11
DREMEL® 10.8V Lithium-Ion
Rotary
2
3
YEAR
YEAR
4
YEAR
5
YEAR
Limited
Warranty
Does it All, Unplugged.™
Variable Speeds 5,000 – 30,000 rpm
Corded performance in a cordless tool.
Separate On/Off Switch
Retains speed setting for ease of use.
Quick Collet Lock
Specification
Voltage (V)
Variable Speed (rpm)
Battery (rechargeable)
Charge Time
Weight (kg)
Part Number
For fast accessory changes.
High-Performance Motor
For maximum performance
at all speeds.
360º Grip Zone
With soft grip for comfort
and control.
Contents
DREMEL® 10.8V Lithium-Ion (8200)
Order information
Order number: F0138200NA
8200 Multi-Tool
10.8
5,000 - 30,000
Lithium-Ion
1 hour
0.62
F0138200NA
Carving /
Engraving /
Routing
191
194
932
8193 84922
Grinding /
Sharpening
0
80596
03078
0
Cleaning /
Polishing
403
414
(3)
429
(2)
421
425
Cutting
EZ409 EZ456 EZ476
(2)
(2)
(2)
561
Sanding
Collets /
Mandrels /
Misc.
407
408
(2)
432
(3)
445
(3)
150
401
402
EZ402
411
(2)
Attachments
Cutting Guide
12
DREMEL – Range Catalogue
13
DREMEL® StylusTM Lithium-Ion
Rotary
2
YEAR
Created to Fit Your Hand
and Your Lifest yle.™
3
YEAR
4
5
YEAR
Variable Speed
5,000 – 25,000 rpm
YEAR
For precise control
in a variety of materials
and applications.
Limited
Warranty
• Always Ready
• Goes Everywhere
Finger-Tip On / Off Switch
For one-handed operation.
Unique Contoured Grip
Compact and Ultra-Lightweight
Designed for superior precision, control,
and comfort in your hand.
Shaft Lock
For quick accessory changes.
Rechargeable 7.2 V Lithium-ion Battery
Specification
Voltage (V)
Variable Speed (rpm)
Battery (rechargeable)
Charge Time
Weight (kg)
Part Number
Stylus
7.2
5,000 – 25,000
Lithium-Ion
1 hour
0.295
F0131100JG
Holds a charge for 2 years while in storage.
Contents
DREMEL® StylusTM Lithium-Ion (1100-25)
Docking Station
Continually Charges
So the tool is always fully
charged and ready to use.
Order information
Order number: F0131100JG
Carving /
Engraving /
Routing
191
106
194
7144
84922
932
403
414(2)
421
425
438(2)
430
402
481
Grinding /
Sharpening
0
80596
02661
5
Cleaning /
Polishing
429(2)
512
Sanding
412(5)
Premium Accessories
Specifically for intricate work.
14
DREMEL – Range Catalogue
Collets /
Mandrels /
Miscellaneous
401
15
DREMEL® Multi-MaxTM
Oscillating
2
YEAR
Repair. Remodel. Restore.™
3
YEAR
4
5
YEAR
YEAR
Limited
Warranty
Ergonomic Grip
Allows for comfort
and control.
Separate
On/Off Switch
Soft-Start Feature
Provides smooth starts.
Maintains a previously
selected speed setting.
Powerful 10.8 V Lithium-Ion
Battery
To help cut through tougher
materials.
Compact Design
Provides access
in tight areas.
Specification
Voltage (V)
Variable Speed (opm)
Oscillation Angle
Battery (rechargeable)
Charge Time
Weight (kg)
Part Number
8300 Multi-Max
10.8
5,000 – 21,000
1.5°
Lithium-Ion
1 hour
0.8
F0138300NA
Accessories available for Dremel Multi-Max
Segment
Cutting
Grout Removal
Sanding
Scraping
Grinding
Attachments
16
Model No
Description
QTY
Part Number
MM422
Wood & Metal Flush Cut Blade
1
2615M422AA
MM422B
Wood & Metal Flush Cut Blade
3
2615M422AB
MM440
Wood Flush Cut Blade
1
2615M440AA
MM440B
Wood Flush Cut Blade
3
2615M440AB
MM450
Wood & Plasterboard Saw Blade
1
2615M450AA
MM450B
Wood & Plasterboard Saw Blade
3
2615M450AB
MM470
Wood Flush Cut Blade
1
2615M470AA
MM385-01
Cutting Kit
5
2615M385AA
MM500
Floor Tile Grout Removal Blade ⅛"
1
2615M500AA
MM501
Wall Tile Grout Removal Blade
1
2615M501AA
MM11
Hook & Loop Pad
1
2615M011AA
MM70W
60, 120, 240 Grit Paper - Wood
6
2615M70WAA
MM80W
60, 120, 240 Grit Paper - Wood
18
2615M80WAA
MM70P
80, 120, 240 Grit Paper - Paint
6
2615M70PAA
MM80P
80, 120, 240 Grit Paper - Paint
18
2615M80PAA
MM600
Rigid Scraper Blade
1
2615M600AA
Contents
MM610
Flexible Scraper Blade
1
2615M610AA
Cutting
MM920
Carbide Rasp
1
2615M920AA
MM300
Universal Adapter - for Dremel accessories to other tools
1
2615M300AA
MM720
Multi-Flex System
1
2615M720AA
MM810
Cutting/Depth Guide
1
2615M810AA
MM820
Assist Handle
1
2615M820AA
DREMEL – Range Catalogue
"
for fast accessory changes
Quick Fit™ Accessory Change System
Provides accessory changes twice
as fast as similar oscillating tool systems.
DREMEL® Multi-MaxTM (8300)
Order information
Order number: F01 38300NA
0
80596
03120
6
MM440
MM450
MM11
MM70W
Sanding
17
DREMEL® TrioTM
Specialty
2
YEAR
Cut . Sand. Rout .™
3
YEAR
4
YEAR
5
YEAR
Limited
Warranty
90° pivoting handle
Telescoping foot
For superior comfort and control.
Depth control while cutting, sanding and routing.
Specification
Input Power (W)
Variable Speed (rpm)
Collet Capacity (mm)
Weight (kg)
Part Number
Dremel Trio
200
10,000 – 20,000
4.7
1.27
F0136800NE
10,000 – 20,000 rpm
Lock-on button
Variable speed switch for
greater versatility and
optimal control.
For comfort during extended use.
On board dust extraction
Accessories available for Dremel Trio
To maintain a clean workplace.
Non-marring base
Segment
Model No
Description
Part Number
Sanding
TR407
½" Sanding Mandrel + 60 Grit
2615T407AA
TR408
½" 60 Grit Sanding Bands (6x)
2615T408AA
TR432
½" 120 Grit Sanding Bands (6x)
2615T432AA
TR445
½" 240 Grit Sanding Bands (6x)
2615T445AA
TR470
½" 60, 120, 240 Grit Bands (6x)
2615T470AA
TR561
Multipurpose HSS Bit
2615T561AA
TR561B
Multipurpose HSS Bit (2x)
2615T561AB
TR562
Wall Tile Cutter
2615T562AA
TR563
Laminate/Sheet Metal Bit, Carbide
2615T563AA
TR615
Corner Rounding Bit
2615T615AA
TR618
Chamfer Routing Bit
2615T618AA
TR654
¼" Straight Routing Bit
2615T654AA
TR670
¼" Straight and Corner Rounding Bit
2615T670AA
TR750
Straight Router Bit, 3 Piece Kit
2615T750AA
TR770
Starter Router Bit, 5 Piece Kit
2615T770AA
TR780
Specialty Router Bit, 5 Piece Kit
2615T780AA
TR820
Trio Compact Foot & Dust Port
2615T820AA
To protect delicate work pieces.
DREMEL® TrioTM (6800)
Order information
Order number: F0136800NE
Contents
Cutting
Cutting
561
8
710364
055593
Routing
Sanding
407
408(2)
432(2)
Routing
654
Attachments
Compact Depth Guide
18
DREMEL – Range Catalogue
Attachments
19
DREMEL® Saw-MaxTM
Specialty
SAW-MAX
2
YEAR
Limited
Warranty
3
YEAR
4
YEAR
TM
5
Worm drive gearing
For durability and power.
YEAR
Dust extraction port
For keeping the work place clean.
Powerful 710 W motor
For tough applications.
Versatile Cutting System
Specification
Input Power (W)
Speed (rpm)
Disc Diameter (mm)
Cutting Depth (mm)
Weight (kg)
Part Number
For a variety of materials (wood, plastic, metal, tile, masonry).
2nd Wheel Position
For flush cutting.
Excellent line of sight
Dremel Saw-Max
710
17,000
75
20
1.8
F013SM20NE
Depth Guide
For precise, confident cuts.
For precise cuts.
DREMEL® Saw-MaxTM
Order information
Order number: F013SM20NE
8
710364
057740
Accessories available for Dremel Saw-Max
Contents
Cutting
SM500
SM510
SM520
Segment
Model No
Description
Part Number
Cutting
SM500
Multi-Purpose Carbide Wheel
2615S500NA
SM510C
Metal Cut-Off Wheel (3pk)
2615S510NC
SM520C
Masonry Cut-Off Wheel (3pk)
2615S520NC
SM540
Tile Diamond Wheel
2615S540NA
SM600
Multi-Purpose Flush Cut Carbide Wheel
2615S600NA
SM840
Mitre Trim Cutting Guide
2615S840AA
SM540
Attachments
Dust Extraction Port
20
DREMEL – Range Catalogue
Attachments
21
DREMEL® VersatipTM
Specialty
Powered by liquid butane gas
Easily refilled.
Cor dless 6 in 1 . Us e any w he re . Us e any t im e .™
Child safety lock mechanism
Children can’t turn on the tool.
Precise
Allows for detailed
and intricate work.
Very short heat-up
time and quick recharge
Use anytime anywhere.
Durable quality
Variable temperature setting
For a long lifetime.
Specification
Burn Time (min)
Tank capacity
Temperatures
Select the right temperature for your project.
Versatile
One tool for 6 different applications.
Weight (kg)
Part Number
Versatip
30 – 60
7 ml / 9 g
1200°C (open air)
680°C (hot air)
550°C (tips)
0.135
F0132000JA
DREMEL® VersatipTM (2000)
Contents: DREMEL®VersaTip Soldering Tip,
Cutting Knife Hot Knife, Flat Wide Flame Head,
Reflector, Hot Blower Head, Soldering Tin with
Blue Cap, Soldering Sponge + Sponge Box,
2 Wrenches: 1 x 7 mm Wrench, 1 x 8 mm Wrench
DREMEL® VersatipTM 6 Interchangeable Tips
Order information
Order number: F0132000JA
8
710364
037582
Soldering
Melting
22
DREMEL – Range Catalogue
Hot Cutting
Woodburning
Shrinking
Paint Removing
23
Rotary Accessories
To optimise your project result, you need the right accessories with a high quality standard. Dremel has created
a range of accessories to suit all your needs. To help you select the right accessories, Dremel has created a
colour coding system: every colour represents a category of applications. This will help you to select the right
accessories for your jobs. No matter which materials you want to work with, Dremel has a solution for you.
Carving /
Engraving /
Routing
Dremel offers high quality carving,
engraving and routing accessories
for many different applications.
Their sharpness and durability
allow them to last a long time.
Grinding /
Sharpening
The accessories in this category
can deburr, smooth, grind
and clean a variety of materials
in any kind of job.
Cleaning /
Polishing
Dremel cleaning and polishing
accessories include brushes,
felt accessories and rubber points
to work on steel, aluminium, brass,
silver, gold and plastics.
Cutting
Dremel provides two types of
cutting accessories for any cutting
job; cut-off wheels and cutting bits.
Cut-off wheels cut metal, wood and
plastic along their edge. Cutting bits
are used with the Dremel cutting
guide and cut in any direction.
Sanding
Dremel sanding accessories
include sanding drums, bands,
discs, flapwheels and abrasive buffs
to remove and smoothen material.
Collets /
Mandrels /
Miscellaneous
This category features the
miscellaneous extras, like drill bits,
collets, mandrels and a MultiChuck.
25
Rotary EZ Lock System
1
1
Pull
2
3
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron,
nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.
Just pull down the
EZ Lock mandrel
2
Twist
Faster Accessory Changes – Easy as 1, 2, 3
Dremel, the inventor of the rotary tool, now brings you EZ Lock - an innovation that makes
changing cut-off wheels quick and easy.
Dremel, the inventor of the rotary tool, now brings you
EZ Lock - an innovation that makes changing cut-off
wheels quick and easy.
Through a patented mandrel and wheel design, Dremel has found a way that enables you
to change your accessory in 3 simple steps – Pull, Click, Twist – without using tools.
Through a patented mandrel and wheel design,
Dremel has found a way that enables you to change
your accessory in 3 simple steps– Pull, Click, Twist
– without using tools!
Overview of the full range of EZ Lock accessories:
For rotary tool users, EZ Lock provides greater ease
and effectiveness when working on projects,
and it saves you time!
With EZ Lock you can change cut-off wheels within
10 seconds: Quick, Easy, Keyless!
EZ402
EZ406
EZ409
EZ456
EZ456B
EZ476
EZ544
EZ545
423E
511E
And this is just the beginning, Dremel will further develop
more accessories to help you work on your project
with more joy and satisfaction.
Insert the Dremel EZ Lock
cut-off wheel onto the EZ Lock
3
Release
Model
Mandrel
512E
EZ471SA
Cutting
Polishing
Until it fits and you are ready
Sanding
EZ472SA
26
DREMEL – Range Catalogue
EZ473SA
Qty
Order number Barcode
EZ402
1
2615E402AC
080596025502
EZ406
5+1
2615E406AC
080596025519
EZ409
5
2615E409AA
080596027476
EZ456
5
2615E456AA
080596025816
12
2615E456AB
080596025823
EZ476
5
2615E476AA
080596025830
EZ544
1
2615E544AA
080596027483
EZ456B
EZ545
1
2615E545AA
080596027490
423E
1
2615E423AC
080596025847
511E
1
2615E511AA
080596025854
512E
1
2615E512AC
080596025861
EZ471SA
1
2615E471AA
080596029609
EZ472SA
1
2615E472AA
080596029616
EZ473SA
1
2615E473AA
080596029623
27
Rotary Carving / Engraving / Routing Accessories
Engraving Cutters
Diamond Wheel Points
For fine detail work, cutting, engraving, carving, touch-up
finishing. Can be used on hard materials like porcelain,
ceramic, glass, hardened steel, silver, gold, brass, copper.
Bits are covered with diamond particles.
Quality cutters for detailed
engraving, carving, routing
in wood, fibreglass, plastic
and soft metals.
105
Model
106
Qty
107
108
Working ø mm
105
1
106
107
108
109
Shank ø mm
111
113
Order number
2.4
2615000105
080596001056
1
1.6
2.4
2615000106
080596001063
1
2.4
2.4
2615000107
080596001070
1
0.8
2.4
2615000108
080596001087
109
1
1.6
2.4
2615000109
080596001094
111
1
0.8
2.4
2615000111
080596001117
113
1
1.6
2.4
2615000113
080596001131
Plexi
190
Model
28
191
Qty
117
118
192
193
Working ø mm
121
194
Shank ø mm
125
196
Order number
7134
7144
7120
7122
7123
Plastic
Model
High Speed Cutters
115
7105
Barcode
0.8
114
7103
134
144
High speed cutters can be
used for shaping, hollowing,
grooving, slotting, making
tapered holes in soft metals,
plastics and woods.
Working ø mm
Shank ø mm
1
2.0
2.4
Order number
Barcode
2615007103
080596071035
7105
1
4.4
2.4
2615007105
080596071059
7120
1
6.7
2.4
2615007120
080596071202
7122
1
2.4
2.4
2615007122
080596071226
7123
1
4.8
2.4
2615007123
080596071233
7134
1
2.0
2.4
2615007134
080596071349
7144
1
2.4
2.4
2615007144
080596071448
Cu
9902
9904
9903
9905
9906
9909
9910
Use for shaping, smoothing
and material removal. Use
on hardened steel, stainless
steel, cast iron, nonferrous
metals, fired ceramics,
plastics, hardwoods
and other hard materials.
Barcode
114
1
7.8
3.2
2615000114
080596001148
115
1
7.8
3.2
2615000115
080596001155
117
1
6.4
3.2
2615000117
080596001179
118
1
3.2
3.2
2615000118
080596001186
121
1
6.4
3.2
2615000121
080596001216
125
1
6.4
3.2
2615000125
080596001254
134
1
6.4
3.2
2615000134
080596001346
144
1
7.8
3.2
2615000144
190
1
2.4
3.2
2615000190
Plexi
Plastic
9911
Model
Qty
9901
1
080596001445
9902
080596001902
9903
Working ø mm
Shank ø mm
Order number
2615009901
Barcode
3.2
3.2
1
2.4
3.2
2615009902
080596099022
1
3.2
3.2
2615009903
080596099039
Al
080596099015
191
1
3.2
3.2
2615000191
080596001919
9904
1
2.4
3.2
2615009904
080596099046
192
1
4.8
3.2
2615000192
080596001926
9905
1
3.2
3.2
2615009905
080596099053
193
1
2.0
3.2
2615000193
080596001933
9906
1
3.2
3.2
2615009906
080596099060
194
1
3.2
3.2
2615000194
080596001940
9909
1
3.2
3.2
2615009909
080596099091
196
1
5.6
3.2
2615000196
080596001964
9910
1
3.2
3.2
2615009910
080596099107
199
1
9.5
3.2
2615000199
080596001995
9911
1
3.2
3.2
2615009911
080596099114
DREMEL – Range Catalogue
Ag
Tungsten Carbide Cutters
9901
199
Qty
7103
Plastic
29
Rotary Carving / Engraving / Routing
Rotary Grinding / Sharpening
Structured Tooth Tungsten Carbide Cutters
9931
Model
9931
9934
Qty
Aluminium Oxide Grinding Wheel
Fast cutting sharp teeth
for greater material removal.
Use on fibreglass, wood,
plastic, epoxy, rubber,
laminates, particle board,
soft metals, ceramic tile.
9936
Working ø mm
1
Shank ø mm
6.4
3.2
Order number
Barcode
2615009931
080596099312
9934
1
7.8
3.2
2615009934
080596099343
9936
1
19.0
3.2
2615009936
080596099367
615
541
Model
541
Epoxy
Qty
Working ø mm
2
Shank ø mm
25.4
Order number
3.2
Barcode
2615000541
08059601059
Ag
Cu
Aluminium Oxide Grinding Stones
640
650
652
For routing, inlaying
and mortising in wood
and other soft materials.
Use with Dremel Router
Attachment 335
or Shaper/Router Table 231.
654
911
Model
Model
Qty
Plastic
Router Bits (HSS)
612
Use for deburring, rust
removal and general
purpose grinding.
Use with mandrel 402.
Working ø mm
Shank ø mm
Order number
Barcode
612
1
2.4
3.2
2615000612
080596006129
615
1
3.2
3.2
2615000615
080596006150
640
1
6.4
3.2
2615000640
080596006327
650
1
3.2
3.2
2615000650
080596006501
652
1
4.8
3.2
2615000652
080596006525
654
1
6.4
3.2
2615000654
080596006549
932
Qty
952
953
Working ø mm
997
8153
Shank ø mm
911
1
11.1
3.2
8175
Order number
2615000911
8193
8215
Use on metals, castings,
welded joints, rivets and
rust. Ideal for sharpening,
deburring and general
purpose grinding
of most materials.
Barcode
080596009113
Plastic
932
1
9.5
3.2
2615000932
080596009328
952
1
9.5
3.2
2615000952
080596009526
953
1
6.4
3.2
2615000953
080596009533
997
1
6.4
3.2
2615000997
080596009977
8153
1
4.8
3.2
2615008153
080596081539
8175
1
9.5
3.2
2615008175
080596081751
8193
1
15.9
3.2
2615008193
080596081935
8215
1
25.4
3.2
2615008215
080596082154
Ag
Cu
Plexi
Router Bit Set
For routing, inlaying and
mortising in wood and other
soft materials. Use with #335
Plunge Router Attachment,
and #231 Shaper/Router Table.
692
Model
692
30
Qty
Working ø mm
Shank ø mm
6
DREMEL – Range Catalogue
Order number
2615069200
Barcode
080596014353
31
Rotary Grinding / Sharpening
Rotary Cleaning / Polishing
Silicon Carbide Grinding Stones
Rubber Polishing Points
Designed to work well
on stone, glass, ceramics,
porcelain and
non-ferrous metals.
83142
Model
83322
Qty
83702
84922
Working ø mm
85422
Shank ø mm
85602
Order number
Blue points for finishing and polishing all ferrous metals. Removes
small burrs and scratch marks left by grinding and sanding,
and cleans and defines grooves. Also effective on many stones
and ceramics.
461
Barcode
83142
1
7.0
3.2
2615083142
080596831424
83322
1
3.2
3.2
2615083322
83702
1
3.2
3.2
2615083702
84922
1
4.8
3.2
2615084922
080596849221
85422
1
19.8
3.2
2615085422
080596854225
85602
1
10.3
3.2
2615085602
080596856021
Model
462
Qty
463
Working ø mm
Shank ø mm
461
1
6.4
2.4
080596833220
462
1
6.4
080596837020
463
1
6.4
Order number
Barcode
2615000461
080596004613
2.4
2615000462
080596004620
2.4
2615000463
080596004637
Polishing Wheels
Ideal for polishing metals
and plastics. Using polishing
compound no. 421 with wheels
to produce a high lustre. Use
414, 422 and 429 with mandrel
401. Use 423 and 425 with
mandrel 402.
Chainsaw Sharpening Grinding Stones
453
Model
454
Qty
Precision ground for quick,
easy sharpening of chain
saw blades. Use with Dremel
Chainsaw sharpening
attachment No. 1453.
455
Working ø mm
Shank ø mm
Order number
Barcode
453
2
4.0
3.2
2615000453
080596004538
454
2
4.7
3.2
2615000454
080596004545
455
2
5.6
3.2
2615000455
080596004552
414
Model
421
Qty
422
423E
Working ø mm
425
Shank ø mm
429
Order number
Barcode
414
6
13.0
3.2
2615000414
080596004149
421
1
–
–
2615000421
080596004217
422
1
10.0
3.2
2615000422
080596004224
423E
1
26.0
3.2
2615E423AC
080596025847
425
1
22.5
3.2
2615000425
080596004255
429
1
26.0
3.2
2615000429
080596004293
Al
Ag
Plastic
Plexi
Cu
Bristle Brushes
403
Model
404
Qty
Use for light deburring,
cleaning, polishing
of silverware, jewellery
and other precious metals.
Can be used with polishing
compound (421).
405
Working ø mm
Shank ø mm
Order number
Barcode
403
1
19.0
3.2
2615000403
080596004033
404
1
13.0
3.2
2615000404
080596004040
405
1
3.2
3.2
2615000405
080596004057
Al
Ag
Cu
32
DREMEL – Range Catalogue
33
Rotary Cleaning / Polishing
Rotary Cutting
Carbon Steel Brushes
428
442
DREMEL® EZ Lock Cutting Wheels
Versatile brush for removing
rust and corrosion, polishing
metal surfaces, deburr and
blend surface junctures or
clean electrical components.
443
1
Model
Model
Qty
Working ø mm
Shank ø mm
Order number
Barcode
428
1
19.0
3.2
2615000428
080596004286
442
1
13.0
3.2
2615000442
080596004422
443
1
3.2
3.2
2615000443
080596004439
Ag
Cu
2
Dremel, the inventor of the multi-tool, now brings you EZ Lock an innovation that makes changing cut-off wheels quick and easy.
Through a patented mandrel and wheel design, Dremel has found
a way that enables you to change your accessory in 3 simple
steps - Pull, Click, Twist - without using any tools.
3
Qty
Description
Order number
Barcode
EZ406
5+1
EZ Lock Starter Kit
2615E406AC
080596025519
EZ409
5
EZ Lock 1½" Thin Cut Off Wheel
2615E409AA
080596027476
EZ456
5
EZ Lock 1½" Metal Cut Off Wheel
2615E456AE
080596025816
EZ456B
12
EZ Lock 1½" Metal Cut Off Wheel
2615E456AB
080596025823
EZ476
5
EZ Lock 1½" Plastic Cut Off Wheel
2615E476AC
080596025830
EZ544
1
EZ Lock 1½" Carbide Cutting Wheel
2615E544AA
080596027483
EZ545
1
EZ Lock 1½" Diamond Wheel
2615E545AA
080596027490
Al
Ag
Cu
Plastic
Stainless Steel Brushes
530
Model
530
531
Qty
Stainless steel brushes do not
cause 'after rust' when used on
corrosive-resistant materials
like pewter, aluminium and
stainless steel.
532
Working ø mm
Shank ø mm
3.2
Order number
2615000530
Cut-Off Wheels
Barcode
1
19.0
8710364010561
531
1
13.0
3.2
2615000531
8710364010578
532
1
3.2
3.2
2615000532
8710364010585
409
Al
Model
Brass Brushes
Model
34
536
Qty
Brass brushes are
non-sparking and softer
than steel. They will not
scratch soft metals like
gold, copper, brass.
537
Working ø mm
Shank ø mm
Order number
426B
540
Qty
Working ø mm
Shank ø mm
Order number
Barcode
409
36
24.0
3.2
2615000409
080596004095
420
20
24.0
3.2
2615000420
080596004200
426
5
32.0
3.2
2615000426
080596004262
426B
20
32.0
3.2
2615426BAA
080596017934
540
5
32.0
3.2
2615000540
080596010607
Al
Ag
Cu
Plastic
Barcode
535
1
19.0
3.2
2615000535
8710364010530
536
1
13.0
3.2
2615000536
8710364010547
537
1
3.2
3.2
2615000537
8710364010554
DREMEL – Range Catalogue
426
Ag
Cu
535
420
For slicing and cutting in metal, wood and plastic. Cut-off wheels
make it easy to cut or slot bolts, screws, sheet metal, thin wood
and plastic. Fibreglass reinforced cut-off wheels (426, 426B)
are for tough applications. The cut-off wheel cuts only along
its edge. Do not attempt to sand or cut curved holes with
them. Use Dremel cut-off wheels with mandrel 402.
Al
Ag
Cu
35
Rotary Cutting
Spiral Cutting Bits
Diamond Wheel
A unique accessory especially suited to cutting, grinding and
filing materials that are harder than metal. For example concrete,
marble, stone, porcelain, ceramic and hard epoxide. The diamond
wheel produces a fine cut, is extremely durable, does not break
and retains its shape.
545
Model
EZ545
Qty
The plasterboard cutting bit 560 gives you fast clean cuts in
plasterboard. The multipurpose cutting bit 561 cuts wood,
plastic, fiberglass, plasterboard, laminate & vinyl siding. The tile
cutting bit 562 cuts ceramic wall tile, cement board and plaster.
(Not for use on floor tile)
560
Working ø mm
Shank ø mm
Order number
Barcode
545
1
22.2
3.2
26150545AB
080596012274
EZ545
1
22.2
3.2
2615E545AA
080596027490
Model
560
561
Qty
562
Working ø mm
Shank ø mm
Order number
2615000560
Barcode
1
3.2
3.2
8710364010592
561
1
3.2
3.2
2615000561
8710364010615
562
1
3.2
3.2
2615000562
8710364010608
Al
Plastic
Plexi
Cutting / Shaping Wheel
For cutting and shaping on soft and hard woods, fibreglass,
plastics and laminates. Do not use on metal. Mandrel included.
Thickness 1.8 mm.
543
Model
Grout Removal Bits
Ideal for cleaning wall
and floor grout or removing
grout to replace broken tiles.
Use with the Dremel Grout
Removal attachment 568.
EZ544
Qty
Working ø mm
Shank ø mm
Order number
Barcode
543
1
25.4
3.2
26150543AA
080596011574
EZ544
1
25.4
3.2
2615E544AA
080596027483
569
Model
570
Qty
Working ø mm
Shank ø mm
Order number
Barcode
569
1
1.6
3.2
26150569AA
080596011970
570
1
3.2
3.2
2615057000
080596012250
Rip / Cross-Cut Blade
Precision saw blade for fine, clean and straight cuts in all sorts
of wood. Perfect for laminate and wood flooring or thin wood
plates. Use only with Dremel Mini Saw attachment 670. Made
of carbon steel, 48 offset teeth guarantee precise, fast cuts
up to 6.35 mm.
Precision Drill Bit Set
The DREMEL precision drill bit
set (628) contains 7 drill bits
for drilling into wood or soft
metal. The different diameters
included are 0.8 / 1.2 / 1.6 /
2.0 / 2.4 / 2.8 and 3.2 mm.
546
Model
546
Qty
1
Working ø mm
Shank ø mm
31.8
3.2
Order number
26150546AA
Barcode
628
080596018214
Model
628
36
DREMEL – Range Catalogue
Qty
7
Working ø mm
Shank ø mm
Order number
26150628AA
Barcode
080596006280
37
Rotary Sanding
Sanding Bands
407
408
Sanding Discs
430
431
432
For rough shaping
and smoothing wood
and fibreglass, removing
rust from metal surfaces
and shaping rubber
surfaces. Sanding bands
are easily replaceable.
438
Sanding discs are designed
for precise sanding on wood.
Use with mandrel 402.
411
Model
Model
Qty
Working
ø mm
Shank
ø mm
Grit
Order number
Barcode
407
1
13.0
3.2
60
2615000407
080596004071
408
6
13.0
3.2
60
2615000408
080596004088
430
1
6.4
3.2
60
2615000430
080596004309
431
6
6.4
3.2
60
2615000431
080596004316
432
6
13.0
3.2
120
2615000432
080596004323
438
6
6.4
3.2
120
2615000438
080596004385
Al
412
Qty
413
Working
ø mm
Shank
ø mm
Grit
Order number
Barcode
411
36
19.0
3.2
180
2615000411
080596004118
412
36
19.0
3.2
220
2615000412
080596004125
413
36
19.0
3.2
240
2615000413
080596004132
Ag
Plastic
Cu
EZ Lock Abrasive Buffs
Plexi
Great for cleaning and light
sanding. Use with either EZ402
EZ Lock Mandrel or Standard
402 Mandrel.
511E
Flapwheels
Model
Perfect for sanding flat
or contoured surfaces
on metal, wood, rubber
or plastic.
502
Model
Qty
Working
ø mm
Shank
ø mm
Grit
Order number
Barcode
511E
2
19.0
3.2 180/280
2615E511AA
080596025854
512E
2
19.0
3.2
2615E512AC
080596025861
320
Al
Plastic
504
Qty
Working
ø mm
Shank
ø mm
Grit
Order number
Barcode
502
1
28.6
3.2
80
2615000502
080596011819
504
1
28.6
3.2
80
2615000504
080596011833
EZ Lock Abrasive Wheels
Al
Cu
Ag
Abrasive wheels for sanding
of contour shapes without
damaging workpieces. No
need for compund. Use with
EZ Lock mandrel EZ402.
Plastic
EZ471SA
Model
EZ471SA
38
512E
DREMEL – Range Catalogue
EZ472SA
Qty
1
EZ473SA
Working
ø mm
25
Shank
ø mm
3.2
Grit
Order number
Barcode
Al
36
2615E471AA
080596029609
EZ472SA
1
25
3.2
120
2615E472AA
080596029616
EZ473SA
1
25
3.2
220
2615E473AA
080596029623
39
Collets / Mandrels / Miscellaneous
Collets
480
Model
481
Qty
480
482
Working ø mm
483
Collets offer the most precise
way to hold an accessory
in a multi-tool. The collet kit
4485 is an assortment of
the different available collets
(0.8 / 1.6 / 2.4 / 3.2 mm)
including a collet nut.
4485
Shank ø mm
1
3.2
Order number
2615000480
Barcode
080596004804
481
1
2.4
2615000481
080596004811
482
1
1.6
2615000482
080596004828
483
1
0.8
2615000483
080596004835
4485
1+4
2615504485
080596000196
MultiChuck
The DREMEL MultiChuck
(4486) allows you to quickly
and easily change accessories
on your DREMEL multi-tool
without using collets. It accepts
accessories from 0.4 mm
to 3.4 mm shank.
4486
Model
Qty
4486
Working ø mm
Shank ø mm
1
Order number
2615004486
Barcode
080596011796
Mandrels
Mandrels are used to mount
different accessories,
like felt polishing wheels
or cut-off wheels.
401
Model
40
402
Qty
EZ402
Working ø mm
Shank ø mm
Order number
Barcode
401
1
3.2
2615000401
080596004019
402
1
3.2
2615000402
080596004026
EZ402
1
3.2
2615E402AC
080596025502
DREMEL – Range Catalogue
41
Accessory Kits
160 Piece Accessory Set (710)
110 Piece Accessory Set (709)
110 high quality Dremel
accessories in a unique
storage box. This versatile
and re-usable accessory kit
includes everything you need
to cut, grind, sand, polish, drill,
sharpen, clean and more.
160 high quality Dremel
accessories in a unique
storage box. The extensive
selection of this set offers
numerous possibilities. Neatly
arranged and very userfriendly. This set also includes
Dremel EZ Lock - an innovation
that makes changing cutoff wheels quick and easy.
Through a patented mandrel
and wheel design, Dremel has
found a way that enables you
to change your accessory in 3
simple steps - Pull, Click, Twist
- without using any tools.
Included accessories
Carving /
Engraving /
Routing
Included accessories
Carving /
Engraving /
Routing
191
Grinding /
Sharpening
Grinding /
Sharpening
8193
83142
Cleaning /
Polishing
414(5)
421
429(4)
423E
Cutting
EZ456
EZ476
540
Sanding
952
953
405
428
414(4)
421
409(12)
420(12)
426
540
422
429(4)
413(12)
430
Sanding
407
42
84922
Cutting
EZ409
Order information
83142
Cleaning /
Polishing
428
Collets /
Mandrels /
Miscellaneous
191
401(2)
408(15)
402
411(24)
EZ 402
412(24)
413(24)
431(15)
432(15)
438(15)
511E
512E
Collets /
Mandrels /
Miscellaneous
Wrench
Order number: 26150710AD
DREMEL – Range Catalogue
430
Barcode: 8710364053629
Order information
407
408(6)
411(12)
412(12)
401(2)
402
415
Wrench
Order number: 26150709AB
431(6)
432(6)
438(6)
511E
Barcode: 8710364053636
43
Accessory Kits
EZ Lock Cutting Kit (EZ688)
Sanding / Grinding Set (EZ686)
All you need for sanding
and grinding in a convenient
box. Removable accessory
tray and 3 dividers provide
perfect storage solution.
Dremel Quick start
leaflet explains the
included accessories.
A selection of Dremel
EZ Lock cutting accessories
and mandrel. Dremel EZ Lock
- an innovation that makes
changing cut-off wheels quick
and easy. Through a patented
mandrel and wheel design,
Dremel has found a way that
enables you to change your
accessory in 3 simple steps Pull, Click, Twist - without
using any tools.
1
3
Included accessories
Included accessories
Grinding /
Sharpening
Cutting
EZ409(3)
Collets /
Mandrels /
Miscellaneous
2
EZ456(4)
EZ476(3)
EZ451GR
84992
952
Cleaning /
Polishing
EZ402
511E
Sanding
EZ411SA (2)
Collets /
Mandrels /
Miscellaneous
Order information
44
Order number: 2615E688AB
DREMEL – Range Catalogue
Barcode: 080596029364
Order information
EZ407SA
EZ412SA (2)
EZ413SA (2)
408 (3)
432 (3)
EZ402
Order number: 26150686AA
Barcode: 080596014254
45
Accessory Kits
Carving / Engraving Set (689)
Multipurpose Set (687)
All you need for carving
and engraving in a convenient
box. Removable accessory
tray and 3 dividers provide
perfect storage solution.
Dremel quick start
leaflet explains the
included accessories.
Assortment of best selling
accessories in a convenient
box. Removable accessory
tray and 3 dividers provide
perfect storage solution.
Dremel Quick Start
leaflet explains the
included accessories.
Included accessories
Included accessories
Carving /
Engraving /
Routing
Carving /
Engraving /
Routing
194
105
106
107
108
83322
83702
7103
7134
Grinding /
Sharpening
Grinding /
Sharpening
952
83142
85422
Collets /
Mandrels /
Miscellaneous
Cleaning /
Polishing
403
414(2)
429(2)
421
84922
481
Cutting
409(36)
426
Sanding
Collets /
Mandrels /
Miscellaneous
Order information
46
407
408
401
402
432(2)
Order number: 26150687AA
DREMEL – Range Catalogue
Barcode: 080596014261
Order information
Order number: 26150689AA
Barcode: 080596025670
47
Accessory Kits
Rotary Attachments
Cleaning / Polishing Set (684)
All you need for cleaning
and polishing in a convenient
box. Removable accessory
tray and 3 dividers provide
perfect storage solution.
Dremel Quick Start
leaflet explains the
included accessories.
To optimise your project result, you need the right accessories with a high quality standard. Dremel has created
a range of accessories to suit all your needs. To help you select the right accessories, Dremel has created a
colour coding system: every colour represents a category of applications. This will help you to select the right
accessories for your jobs. No matter which materials you want to work with, Dremel has a solution for you.
Attachments
to Reach
Flexible Shaft (225)
Right Angle Attachment (575)
Attachments
to Rout
Plunge Router Attachment (335)
Shaper / Router Table (231)
Attachments
to Sharpen
Chainsaw Sharpening
Attachment (1453)
Lawn Mower Sharpening
Attachment (675)
Attachments
to Cut
Multipurpose Cutting Kit (565)
Wall Tile Cutting Kit (566)
Wall & Floor Grout Removal Kit (568)
Attachments
to Control
Multi-Vise™ (2500)
Workstation™ (220)
Sanding/Grinding Guide (A576)
Detailer’s Grip (A577)
Attachments
to Saw
Mini Saw Attachment (670)
Attachments
to Plane
Planer Attachment (PL400)*
Included accessories
Cleaning /
Polishing
Collets /
Mandrels /
Miscellaneous
403
404
401
402
405
428
520
414(6)
422
425(2)
429(3)
421
*400, 4000 and 8200 Rotary Tools Only
Order information
48
Order number: 26150684AA
DREMEL – Range Catalogue
Barcode: 080596014292
49
Attachments
Attachments to Reach
Flexible Shaft (225)
Attachments to Sharpen
Right Angle Attachment (575)
Chainsaw Sharpening Attachment (1453)
Lawn Mower Sharpening Attachment (675)
Contents: Right Angle Attachment,
Driver Cap
Contents: Sharpening Angle Guide, Adjustment
Gauge, Chainsaw Sharpening Grinding Stones
Contents: Sharpening Angle Guide
Aluminum Oxide Grinding Stone (932)
• I deal attachment for precise, detailed work or hard
to reach places.
• Comfort grip handpiece allows fingertip control
to cut, grind, sand, polish and more.
• Integrated shaft lock button for quick and easy accessory
changes. 127 mm bend radius provides more comfort
and flexibility during use.
• Quick connect attaches your Dremel tool in seconds.
• D
esigned to use accessories in right angle for hard
to reach places.
• Ball bearings and spiral bevel gears provide smooth
and cool operation and guarantee longer lifetime.
• Coupling system allows to place the attachment
in 12 different directions on your Dremel tool.
• Quick connect attaches your Dremel tool in seconds.
• T
he fastest, easiest way to sharpen dull,
slow-cutting chain saws.
• Easily attaches to your Dremel tool.
• Works with a variety of different chain sizes.
•
•
•
•
Order information
Order information
Order information
Order information
Order number: 26150225AB Barcode: 080596002251
Order number: 26150575AD
Contents: Flexible Shaft - length 1070 mm,
Driver Cap
Barcode: 080596012267
Attachments to Rout
Order number: 26151453AA
Barcode: 080596014537
he fastest, easiest way to sharpen lawnmower blades.
T
Easily attaches to your Dremel tool.
Guide provides optimum sharpening angel.
Sharpens many lawn and garden tools.
Order number: 26150675AA Barcode: 080596019303
Attachments to Cut
Plunge Router Attachment (335)
Shaper / Router Table (231)
Multipurpose Cutting Kit (565)
Wall Tile Cutting Kit (566)
ontents: Plunge Router Attachment,
C
Edge Guide, Circle Guide, Guide Bushing
Set, Wrench
Contents: Shaper / Router Table
Contents: Cutting Guide, 2 Plasterboard Cutting
Bits 560, 1 Multipurpose Cutting Bit 561
Contents: Cutting Guide, 1 Tile Cutting Bit 562
(not for use on ceramic floor tiles)
• C
onverts your Dremel tool into a plunge router to rout
circles, signs and inlay work, decorative edges and to rout
parallel to an edge.
• Plunge-lock in handle - simply turn handle to lock/unlock.
• Two depth stops for quick, consistent adjustment of depth.
• Edge guide and circle guide to rout straight lines
and perfect circles.
• C
onverts your Dremel tool into a bench mounted
tool for precise routing, shaping and sanding.
• Slot, groove, sand and trim edges.
• 3-way adjustable fence for accurate working result.
• Work table 203 x 152 mm.
• Provides controlled cutting in a variety of materials.
• Easily attaches to your Dremel tool.
• Easy depth adjustment up to 19 mm material thickness.
• P
rovides controlled cutting in ceramic wall tiles.
• Easily attaches to your Dremel tool.
• Easy depth adjustment up to 19 mm material thickness.
Order information
Order information
Order information
Order information
Order number: 26150335AA
50
Barcode: 080596022617
DREMEL – Range Catalogue
Order number: 26150231AA
Barcode: 080596002312
Order number: 26150565AA
Barcode: 080596010621
Order number: 26150566AD
Barcode: 8710364010639
51
Attachments
Attachments to Cut / Plane
Attachments to Control
Wall & Floor Grout Removal Kit (568)
Planer Attachment (PL400)
Sanding / Grinding Guide (A576)
Detailer’s Grip (A577)
ontents: Grout Removal Attachment,
C
1.6 mm Grout Removal Bit 569
Contents: Planer Attachment,
Planer Cutting Bit
Contents: Sanding / Grinding Guide
Contents: Detailer's Grip Attachment
• S
pecially developed for removing grout from between
wall and floor tiles.
• The risk of chipping your tiles is greatly reduced compared
with manual chiselling.
• Guide keeps bit centered between tiles.
• Easy depth adjustment.
•
•
•
•
urable high-speed steel blade lasts up to 500 linear feet.
D
Planes a depth of 1/64" per pass on material up to 2¼" wide.
2¼" planing width fits most interior and exterior doors.
Precision-ground blade produces a mark-free,
smooth surface.
• 90° and 45° edge guide assures accurate planing.
• Compatible with Dremel 400 Series, 4000 Series
and 8200 Rotary Tools.
• Enhanced control during sanding and grinding applications.
• Platform offers stability during edge sanding
and sharpening.
• Adjustable depth control for a precise finish.
• A
dded comfort and control for detailed applications.
• Repositions the weight of the tool into the palm
of your hand for improved balance.
Order information
Order information
Order information
Order information
Order number: 26150568AA
Barcode: 080596012021
Order number: 26150PL4AA
Barcode: 080596023867
Attachments to Control
Order number: 2615A576AA
Barcode: 080596030377
Workstation™ (220)
Mini Saw Attachment (670)
Contents: Dremel Multi-Vise,
Removable Soft-Pads,
Tool Holder Adapter
Contents: Combined Drill Press
Contents: Mini Saw Attachment,
Rip/Cross-Cut Blade (546), Driver Cap
• T
he Dremel 3-in1 Multi-Vise. Stationary vise,
stand alone clamp & Toolholder.
• Clamps to any workbench, table or countertop
• Rotates 360° and tilts 50°. Allows approach
in the workpiece from an comfortable angle.
• Jaws may be used with base unit or detached
for use as a stand-alone bar clamp.
• Makes removal of objects from jaws fast.
• Resists twisting and bowing for solid stability.
• T
his is the perfect solution for stationary
working with your Dremel.
• Drill vertically or in an angle, adjustable
in increments of 15 degrees.
• Holds tool horizontally for polishing and sanding.
• Integrated, telescoping tool stand holds
tool with Flex Shaft (225).
• Base markings (metric and inches).
• T
ransforms your Dremel tool into a precision circular
saw for fine, clear and straight cuts in all sorts of wood.
• Perfect for laminate and wood flooring or thin wood plates.
• The guide allows to make straight cuts.
• This Mini Saw Attachment is easier to use than a hard
saw, more precise than a jigsaw and fits in tighter spaces
than a circular saw.
Order information
Order information
Order information
52
Barcode: 080596026516
DREMEL – Range Catalogue
Barcode: 080596030384
Attachments to Saw
Multi-Vise™ (2500)
Order number: 26152500JB
Order number: 2615A577AA
and Tool Holder
Order number: 26150220AA
Barcode: 080596022624
Order number: 26150670AC
Barcode: 080596018023
53
Rotary Tool Hints and Tips
1. Accessory Shank
Variable Speed
Electronic Feedback
The part of the Dremel accessory that is
inserted into the tool. Most of the Dremel
accessory shank sizes are 3.2 mm. Other
sizes include 2.4 mm, 1.6 mm and 0.8 mm.
For greater versatility. Controls do not interfere with grip.
Maintains speed under load.
Separate On / Off Switch
4. MultiChuck
Allows users to change accessories
without the use of any collet in the
tool. Works with the Dremel corded
and cordless high speed rotary tools,
and all attachments except the
router, cutting guide, grout removal,
chainsaw sharpening and lawnmower
sharpening attachments.
2. Collet Nut
Tightening the collet nut forces the collet’s
fingers inward, securing accessories
for use. Avoid excessive tightening.
Retains speed setting for ease of use.
Quick Collet Lock
For fast accessory changes.
Pencil Grip
Close to bit.
3. Collet
High-Performance Motor
The most precise way to hold an accessory in
a high speed rotary tool. Even at high speeds
and maximum pressure, collets stay tight.
The collet is located underneath the collet nut
inside the tool’s shaft.
For maximum performance
at all speeds.
5. Shaft
360º Grip Zone
The rotating part of the Dremel rotary
tool where the collet is inserted.
The shaft is threaded for attaching
the collet nut or the MultiChuck.
With soft grip for comfort
and control.
Using Mandrel 401:
Using MultiChuck:
Screw accessory
on to the mandrel firmly.
Attaching an accessory to the tool
using the collet and collet nut
Attaching an accessory to the
tool using the MultiChuck
Using Mandrel 402*:
1. Your tool comes with an 3.2 mm collet and collet nut
1. Your tool comes with an 3.2 mm collet and collet nut
Loosen screw, Replace
accessory, Tighten screw.
Do not overtighten.
Using Collets:
2. Now determine the accessory shank size
2. Depress shaft lock button
3. Select a collet to fit the shank diameter of the accessory
3. Loosen and remove collet and collet nut from your tool
4. Depress shaft lock button
4. Begin to thread the MultiChuck onto the tool shaft
while keeping shaft lock button depressed
Dremel accessories have different
shank sizes, depending on the
accessory you might need to use
a different collet. Collets sizes are: 3.2 mm / 2.4 mm /
1.6 mm / 0.8 mm. Your multi-tool comes with a 3.2 mm collet.
5. Loosen and remove collet nut
Changing sand band
of a sanding drum*:
Loosen screw, Pull old band
off the rubber bushing,
Replace with new band,
Tighten screw.
54
It accepts accessories from 0.4 mm to
3.4 mm shank. Dremel MultiChuck uses
similar system as a conventional driller
and dismiss the use of any collet. You can
loosen and tighten it using hands.
DREMEL – Range Catalogue
6. Insert properly sized collet
5. As the jaws begin to close, insert the shank of
the accessory into the chuck
7. Replace but do not tighten collet nut
8. Insert shank of accessory
9. Tighten collet nut
* Hint:
For loosening and tightening screws use the
bottom of the wrench
EZ Lock:
1
2
3
Through a patented mandrel
and wheel design, Dremel has
found a way that enables you to change your accessory in
3 simple steps: Pull, Click, Twist – without using any tools.
55
Icons
Stone
Brick
Ceramic
Drywall /
Plasterboard
Gas
Concrete
Granite
Marble
Porcelain
Tiles
Metal
Al
Ag
Cu
Aluminium
Brass
Cast iron
Copper
Gold
Hardened
Steel
Fiberboard
Hardwood
Laminates
Plywood
Softwood
Silver
Stainless
Steel
Wood
Chipboard
Other
Epoxy
Carbon
56
Expoxy
Plastic
Glass
DREMEL – Range Catalogue
Plastic
Plexi
Plexiglass
Rubber
Vinyl
Soft Metal
Projects
Dremel tools are smart, light to use and extremely versatile! They can be used for a wide variety of applications
such as engraving, gluing, embossing and wood burning. Dremel products can be used in all steps of your
projects, from beginning till end.
Outdoor
Making a Wooden Sign
Cleaning Rust off Patio Furniture
and Other Metal Items
Indoor
Remove Grout
Craft
Etch Bottle or Vase
Cut Laminate Flooring
Wine Rack
59
Projects - Outdoor
Projects - Indoor
Cleaning Rust off Patio Furniture
and Other Metal Items
Remove Grout
What you need:
A
tools
Dremel 4000 Series
B
accessories
C
attachments
What you need:
A
tools
B
MM500 Grout
Removal Blade
(for oscillating
tool)
Dremel Multi-Max
Dremel 3000 Series
Dremel 4000 Series
Dremel 8200 Series
428
Steps
1) Attach the 428 Carbon Steel Brush to Dremel rotary tool. Power
the tool on and slowly increase the tool’s speed. Do not run the tool
in excess of 15,000 rpm.
2) Make contact with metal, working tool in a circular motion to remove rust.
3) After removing built up rust, replace the 428 Carbon Steel Brush with the
952 Aluminum Oxide Grinding Stone to grind deep corrosion and rust down
to bare metal.
accessories
C
attachments
568 Grout Removal Kit
(for rotary tool)
Steps
1) Attach Grout Blade to Multi-Max or 568 Grout Removal kit to your Dremel rotary
tool and set the tool to a desired speed (between 15,000 to 20,000 rpm).
2)In smooth even motions, continue to remove the grout by applying a firm,
even pressure. Guide the tool at a right angle to the surface to prevent the
blade from catching/cutting the edge of the tile. Depending on the hardness
of the grout, a few passes may be required.
4) Should there still be sharp burs present on the metal, use the 425 Emery Impregnated Polishing Wheel to remove. The object is now ready to prime
and paint, if desired.
Create a festive, wooden door hanging
Lay Laminate Flooring
Avoid annual holiday decoration costs by making your own personalized door
hanging out of sturdy wood to withstand yearly wear and tear. Use the Dremel
Trio to cut, sand and rout a design, such as a holiday greeting or winter snowman.
Then, use the cordless Dremel Multi-Max for quick and easy surface sanding.
What you need:
tools
B
accessories
Dremel Trio
MM70W
Dremel Multi-Max
MM11
C
attachments
TR820 Dust
Port Adaptor
TR561
Steps
TR432
1)With a ½ inch wooden plank properly secured, use the Dremel Trio with the
TR561 Multi-Purpose Cutting Bit to cut the board in the shape of the desired
design.
2)
tools
Dremel Saw-Max
What you need:
A
A
After cutting, clean up any rough edges using the TR432 120 Grit Sanding Band at medium speed. Transform straight edges into decorative edges by utilizing the Trio. Tip: To cut straight lines or perfect circles use the TR800 Circle-Cutter/Straight-Edge Guide Attachment with your Trio.
B
accessories
C
attachments
SM500
SM600
Extra - Pencil, measuring tape, Dremel Multi-Vise
Steps
1) Measure length of flooring piece needed.
2)Mark laminate flooring to size of piece needed, using multiple marks to ensure
a straight line.
3) Clamp flooring piece to workbench or other steady surface.
4) Use Saw-Max with SM500 Cutting Wheel to cut across flooring.
5) Place on floor and install on subfloor as required.
6) For neat finishing, use SM600 Carbide Flush cutting wheel to cut into skirting boards and to easily slot in laminate flooring.
3)Before staining or painting the sign, use the cordless Dremel Multi-Max,
MM70W Wood Sandpaper and MM11 Hook and Loop Pad to sand your sign’s
surface. For a smoother finish, start with 120 grit sanding paper and finish with
240 grit sanding paper, and always sand in the direction of the grain.
60
DREMEL – Range Catalogue
61
Projects - Craft
Etched Bottle or Vase
What you need:
A
tools
Dremel Stylus
B
accessories
7103
C
attachments
481
7134
Extra - Masking tape, glass bottle or vase
Steps
1) Test the different Dremel accessory bits and their effects on a piece of scrap
glass before moving on to your work area.
2)Transferring your design to the vase: Method One. Draw your design freehand
on the glass vase using a permanent marker.
3)Transferring your design to the vase: Method Two. Use a permanent marker on
the outside of the vase to trace a photo or lettering that is taped to the inside
of the vase.
4)Follow the pattern you drew on the glass using the Dremel Stylus and one of
the accessory bits to etch your design directly onto the glass. Accessories
7103 and 7134 require the use of the 481 collet.
Wine Rack
What you need:
A
tools
Dremel Trio
Dremel Multi-Max
B
accessories
TR563
TR432
MM70W
C
attachments
TR615
MM11
Steps
1)Find the wine rack pattern on the Dremel website or develop your own pattern,
then mark your cut lines onto a board no thicker than ½ inch. Secure the board
to make sure there’s clearance between the bottom of the working bit and
the top of your workbench. With your Dremel Trio set to a high speed, begin
your cut using a TR563 Hard Wood/Sheet Metal Bit and firm grip for optimal
control. Set the tool’s foot depth so that ⅛ inch to ¼ inch of your cutting bit’s
tip extends beyond the bottom of the work piece.
2) After cutting, unplug your tool for a quick change to the TR432 120 Grit
Sanding Band. Run your tool over the less–than–perfect spots.
3) After sanding, use a TR615 Piloted Corner Rounding Bit to dress edges.
Run the Trio at a high speed and push the router bit gently. Take a few passes
removing only a portion of the amount of you want to remove at a time.
4)After routing, try sanding the wine rack’s surface with the cordless Dremel
Multi–Max, MM70W Wood Sanding Paper and MM11 Hook & Loop Pad.
Start with the 120 grit sanding paper and finish with 240 grit sanding paper
for a smooth finish. Set the tool to a medium speed when sanding.
62
DREMEL – Range Catalogue