Thermalite Shutters - Danmer Custom Shutters

T HE GREEN C HOICE
IN C USTOM S HUTTERS:
E NERGY E FFICIENT T HERMALITE
The Thermalite™ Shutter Insulating System was created to
reduce energy consumption in your home by cutting heat
loss or gain through your windows.
Thermalite will keep your house warmer in the winter
and cooler in the summer, providing as much as 3 times
the insulation of typical wood shutters, reducing your
home energy bills by up to 35%.
over 40 years
• Shutters that look and feel
exactly like wood
• Insulates up to 3 times better
than wood shutters
• Lowers your home energy bills
Thermalite shutters are made in the USA
proprietary
are water based, environmentally safe,
and produce very low VOCs.
• Made right here in the USA for
by up to 35%
• A warranty that’s transferable
to the next homeowner
Thermalite™ Shutters
• Shutters that increase the resale
value of your home
Call 888-326-6378
888-DANMER-8
For your FREE in-home design consultation
Contractor License #1013172
THE RIGHT SHUTTERS
WILL SAVE YOU UP TO 35%
ON YOUR ENERGY BILLS
How It Works
What Else Makes Thermalite Unique?
ThermaliteTM Shutters from Danmer are made from non-toxic
In addition to saving on energy costs, Thermalite won’t crack,
polymer material that provides up to three times the insulation
warp, peel, or discolor. It has no toxic ingredients, unlike rigid
provided of wood shutters. More insulation means the heat you
vinyl or MDF, and it is flame retardant. It is also more friendly to
pay for stays inside during the winter and the air conditioning
the environment, using less resources in production, and does not
you REALLY pay for all summer stays in!
break down into toxic chemicals when they are disposed of. And
Tested and Proven by Independent Home Builders
Independent testing carried out by the National Association
Thermalite comes with the most unique lifetime warranty in the
industry, one that’s even transferable to the next homeowner.
of Home Builders Research Center shows that the R factor for
The Origins of Thermalite
Thermalite is nearly three times that of wood. This means that,
The Thermalite story began in the mid 1980s, when David
compared to wood, it takes nearly three times the amount of
Neiman, founder of Danmer Custom Shutters, went looking
energy applied to one side of piece of Thermalite to raise the
for a way to make synthetic shutter louvers that would provide
temperature on the other side one degree centigrade. To be
better insulation and last longer. Over time, he was able to
specific, the R factor for wood is just under 1, while the R factor
manufacture not just the louvers out of Thermalite, but all
for Thermalite is nearly 3. The greater the R factor, the greater the
of the shutter components as well.
capacity to insulate. (By the way, don’t be confused if you hear
someone talking about “U factor.” The U value is the inverse of
the R value, or 1 over R. So, with U values, lower is better.)
As the manufacturing process has become
more refined, Thermalite Shutters have led
the industry in energy efficiency. They now
What Does All That Mean?
provide 3 times the level of insulation
Thermalite shutters are about three times better than wood
o ered by wood shutters.
at keeping you warmer in winter and cooler in the summer.
Given that wood shutters already provide far better insulation
than draperies and blinds, installing Thermalite shutters
™
The result is an elegant, completely non-toxic shutter, with a
powerful capacity to insulate.
will significantly reduce your home energy costs.
Call
Lic#1013172
Lic#1013172
888-326-6378
888-DANMER-8
© 2016 Danmer Custom Window Coverings. All Rights Reserved.