clicking here - Ti22 Performance

Ti22 Performance Inc.
100 Halstead Blvd., Zelienople, PA 16063
724-453-2307 Phone 724-452-0217 Fax
ti22performance.com [email protected]
In the Fall of 2010, Ti22 Performance purchased the assets of JEI Performance
and developed a brand new frame, the GF1 Chassis. A skilled team was
assembled to develop and launch the new division of Ti22. On its first night to
hit the track, the GF1 won both its heat and feature in a convincing fashion and
the rest has been history. In its debut year, the GF1 Chassis recorded more
than 55 wins nationwide, 4 track championships and 3 “first-night-out” winners.
More than 100 cars were distributed worldwide in one short year.
The GF1 Chassis design was devised from years of experience in the sprint
car industry. For years, the sprint car industry has relied on the same basic
design principles for chassis frames and parts. Its our goal and our personal
commitment to change the new standard and keep pushing the limits of
chassis design. A good team is only as good as its weakest link. Starting from
the frame up, we are challenging design concepts to make teams more
competitive overall. All GF1 Frames and components are fabricated in Carlisle,
PA by highly talented welders. The craftsmanship of our cars is second to none
in the sprint car industry and this is something we take great pride in. The GF1
Frames are designed to win and built to perform.
##
About the GF1 Chassis ..........................................................3
GF1 Models ....................................................................5
GF1 Kits .................................................................6
Chassis Components ..................................9
(Motorplates, Pedals, Fasteners, Brake Line Kits, Hoses, Misc.)
Body Panels ......................................13
(New 2012 Body, Replacement Panels, Components)
Chassis Repair .........................17
(Tabs and Brackets)
GF1 Chassis Apparel .......18
Terms & Dealers ..................19
Contact Us
Contact us today to discuss your sprint car needs. Check out our
website for up to date part information and to place orders.
Find a dealer near you! Check out our dealer list on Page 19.
Ti22 Performance Inc.
100 Halstead Blvd.
Zelienople, PA 16063
Office: 724-453-2307
Fax: 724-452-0217
[email protected]
2
The GF1 Chassis
The GF1 Chassis was uniquely designed to give racers the ultimate advantage in sprint car racing.
The GF1 Chassis was designed with a unique front end to provide teams with a more uniform and
controlled flex zone in front of the engine compartment. Consistency and repeatability have
trademarked GF1 teams around the world.
The chassis are fully designed and manufactured in the USA by Ti22 Performance using high quality
4130 chromoly tubing. The frames are fabricated by highly talented and experienced welders with
years of experience building sprint car frames. Quality and precision are critical components of the
GF1 sprint car program. The GF1 Frames are designed to win and built to perform.
Jordon Mallett - Greenbrier, AR
3
Brad Sweet - Kasey Kahne Racing
Darren Mollenoyux - Warrnambool, Aus
American Made – GF1 Chassis are
fabricated in Carlisle, PA using high-quality
American Made materials
Experienced Welders – Employees are highly
skilled craftsman and have extensive experience building sprint car frames
Proven Results from Start – In the debut
year, the GF1 Chassis had 3 first-night-out
winners as well as over 55 wins nationwide
Intuitive Design Team – Innovation in safety and
performance is an ongoing priority
Performance Enhancing Options – Unique
options are offered help the car react better to
varying conditions
Superior Service – Multiple contacts on call for
managing customer inquiries and answering
technical questions
Fabricated for Safety – Custom-mounted seat bars
are one of the many ways the frames are designed
to protect the driver
Innovative Design – Unique front end bracing
delivers consistent and competitive results
High Quality Materials – Material
quality is closely monitored to
ensure performance consistency
2012 GF1 Body
Craig Mintz - Bradner, OH
WoO Podium-Larson, McMahan, Pittman Dale Blaney - Ti22 Motorsports
4
GF1 and GF1-X Models
The NEW 2013 GF1 introduces a revised front end that achieves the performance
expectations of a GF1 with the quality and maintainability you would expect from Ti22. The
front end combines non-traditional bracing to reduce weld affected areas and deliver a more
controlled and uniform flex zone in front of the engine compartment. This encourages a
more consistent chassis that is capable of adapting to variable conditions.
The GF1-X is the perfect combination of a standard GF1 and and GF1-SRM,
combining the frame of a GF1 and front end of the SRM. The frame is 2” taller
in the front and rear and is offered in both non raised rail and 1” raised rail
options. The front end bracing is the same used in the GF1-SRM Models.
GF1 CHASSIS
Roll Cage Height:
2” Taller in Front and Rear
Wheel Base:
86 1/2”
Engine Setback:
40”
RF Arm Length:
13 1/4”
Raised Rail Options:
0” or 1” Raised
GF1-SRM Model
The GF1-SRM was designed to bridge the gap
between the standard GF1 and a more traditional
chassis design. The frame is a standard height cage
and is available in a 1/2” raised rail configuration. The
front end bracing is based off a more traditional design
with some modern adjustments for performance.
GF1-SRM CHASSIS
Roll Cage Height:
Standard Height
Wheel Base:
87 1/2”
Engine Setback:
40”
RF Arm Length:
13 1/2”
Raised Rail Options:
1/2” Raised
GF1 Frame Options
5
Crimp Lock Nuts make an axle change quickly with ease
Double Top Wing Mount change top wing posts position with ease
Right & Left Safety Bars available for added driver protection
Torsion Bearings reduces torsion bar bind
Building Your GF1 Chassis
Step 1: Build Your Chassis
Each car is custom built per each teams unique needs. A full list of options is included on the order form for
each person to specify exactly what they need on the car. Options such as Fuel Tank Type, Shock Spuds, etc
make it easy to make the car your own. All options at this stage are included in the price of the chassis frame.
Step 2.1: Customize Your Chassis - Frame Options
Beyond the frame construction, many options are offered to suit your individual racing style and meet certain
performance and safety needs. Options such as the Torsion Bearing Option and Safety Cage bars are offered.
Step 2.2: Customize Your Chassis - Body Options and Powder Coating
In this section, options such as Lower Panels, Body Options and powder coating are offered.
Step 2.3 - 2.4: Customize Your Chassis - Seat Bar Layout & Cage A-Frame
Positioning the seat bars correctly is a critical factor for the safety of the driver. All cars are offered with the
option to customize the seat bar dimensions at no additional charge.
Step 3: Select Your Package
Whether you need a spare frame or complete roller, we offer a variety of kits to meet the simplicity or
complexity of your needs. Upgrades to each of the component packages are offered so that you can customize your cars even more. Upgrades such as Black Anodized, Titanium and Adjustable are offered where
applicable.
Step 4: Choose Your Extras
If we missed anything, now is the time to add extras to your chassis order. Items such as Brake Line Kits,
Body Panels and spare parts can be added at this time.
Option 1 - GF1 Bare Chassis
1. Frame
Option 2 - GF1 Starter Package
1.
2.
3.
4.
Frame
Fiberglass Body
Lower Kick Panels
Complete Dzus Fasteners
6
Building Your GF1 Chassis
Option 3 - GF1 Racer Package
1.
2.
3.
4.
5.
Frame
Fiberglass Body
Lower Kick Panels
Complete Dzus Fasteners
Nerf Bar and Bumper Set
6. Floor Pan
7. Rear Motor Plate
8. Front Torsion Arms
9. Rear Torsion Arms
10. Front Axle
Frame and Body Not Shown
Option 4 - GF1 Mini-Roller Package
1. Frame
2. Fiberglass Body
3. Lower Kick Panels
4. Complete Dzus Fasteners
5. Nerf Bar and Bumper Set
6. Floor Pan
7. Rear Motor Plate
8. Front Torsion Arms
9. Rear Torsion Arms
10. Front Axle
11. Aluminum Torsion Stops
12.
13.
14.
15.
16.
17.
18.
19.
20.
Steel Torsion Stops
Complete Radius Rod Set
Standard Birdcage Set
Standard Jacob’s Ladder
Ladder Strap Kit
Tie Rod
Drag Link
Steering Arms
Pitman Arm, Angled
Frame and Body Not Shown
Option 5 - GF1 Deluxe Package
1. Frame
2. Fiberglass Body
3. Lower Kick Panels
4. Complete Dzus Fasteners
5. Nerf Bar and Bumper Set
6. Floor Pan
7. Rear Motor Plate
8. Front Torsion Arms
9. Rear Torsion Arms
10. Front Axle
11. Aluminum Torsion Stops
12. Steel Torsion Stops
13. Complete Radius Rod Set
14. Standard Birdcage Set
15. Standard Jacob’s Ladder
7
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
Ladder Strap Kit
Tie Rod
Drag Link
Steering Arms
Pitman Arm, Angled
FK Rod End Kit
Throttle Pedal
Brake Pedal
Master Cylinder, 1” Bore
Steering Box Top Mount
Top Wing Post Set
Rear Wing Tree
Nose Wing Post Set
Front Wing Straps Set
Frame and Body Not Shown
Building a GF1 Roller
Option 6 - GF1 Custom Roller
When building a GF1 Custom Roller, there are numerous options and combinations to build a car custom tailored
to your needs. Ti22 Performance partners with a wide network of manufacturers to provide you with a wide
spectrum of component options. Below is a list of some of the more popular options to add to your car. Call for
your free custom quote per your specifications.
Seats
Kirkey
ButlerBuilt
Driveline
Rear End
Winters
DMI
Frankland
Gauges
Wings
QuickCar
Autometer
Rebco
Tel-Tac
Top Flite
Wings Unlimited
HRP
Vortex
Winters
DMI
MPD
Tail Tank
ATL
FuelSafe
Saldana
Shocks
ProShocks
Afco
Bilstien
QA1
VRP
Radiator
Four Seasons
Intense
Saldana
Torsion Bars
DMI
Winters
MPD
Chalk Stix
Rod Ends
Wheels
Keizer
MPD
Valken
FK Rod Ends
Brakes
Steering
KSE
Wilwood
Red Devil
Tire Bleeders
Conroy
“Pneu” Control
Front End
Winters
DMI
MPD
Keizer
8
Chassis Components
Rock Screen
Constructed of lightweight rod, Ti22's
Rock Screen provides dependable
protection from rocks and other debris.
Available in titanium or black powder
coated chromoly.
PART ID
MATERIAL
01029C
Chromoly
01029T
Titanium
Front Motor Plate
PART ID
STYLE
MATERIAL
01130A
Standard
Aluminum
01130N
Standard
Anodized Aluminum
01166A
w/ Bushings
Aluminum
01166N
w/ Bushings
Anodized Aluminum
Ti22’s Front Motor Plate is offered in a standard
configuration or with flex bushings. The bushings
provide the ability for the chassis to flex and
respond to changing track conditions.
“...the GF1 Assembled easier than any
other cars I have put together over the
years. I did not have to rework any
parts - they all fit perfectly.”
Don Kreitz Jr. - Sinking Springs, PA
Rear Motor Plate
Ti22’s Rear Motor Plate is made from
durable aluminum with lightened pockets
for added weight savings.
9
PART ID
STYLE
MATERIAL
01129A
0” Raise
Aluminum
01129N
0” Raise
Anodized Aluminum
01131A
1/2” Raise
Aluminum
01131N
1/2” Raise
Anodized Aluminum
01132A
1” Raise
Aluminum
01132N
1” Raise
Anodized Aluminum
Chassis Components
Tank Mount Plate
Brake Pedals
Ti22 Brake Pedals are offered for standard
cars or 1/2" and 1" raised rail cars.
Titanium and Chromoly options are offered.
The Tank Mount Plate reduces the
need for varying tail tank mounts.
The adjustable mounts minimize tail
tank mounting inconsistencies.
PART ID
STYLE
MATERIAL
01125C
0” Raise
Chromoly
01125T
0” Raise
Titanium
01126C
1/2” Raise
Chromoly
01126T
1/2” Raise
Titanium
01127C
1” Raise
Chromoly
01127T
1” Raise
Titanium
#01136
Throttle Pedal
Ti22’s Throttle Pedal mounts to a 5/16”
spud on the chassis frame. Lighten up with
a titanium pedal or keep costs down with a
chromoly black powder coated one.
GF1 Chassis Bolt Kit
The GF1 Chassis Bolt Kit contains more than 290 components for
putting together your car using top quality bolts that were made for
Sprint Car Racing. Cut extra weight with the titanium kit!
Steel Kit #01165S
Titanium #01103T
Titanium Kit #01165S
Chromoly #01103C
“Just wanted to drop you a
line about my GF1 car first
time out...best car I have
ever owned. wow. thanks.”
Orval Burke Sr. - Salinas, CA
10
Chassis Components
Complete Fuel System Hose Kit
#10 Power Steering Return Line
#01201
Will work with a KSE Steering Pump
and Gen II Steering Gear.
#01198
4-Piece Wing Line Kit
#6 Pressure Line
Will work with a KSE Steering Pump
and Gen II Steering Gear.
#01200
#01199
Soft Brake Line Kit
2-Wheel and 3-Wheel Brake Line
Kits are available to be installed on
your car or sold separately.
2 Wheel Kit #01202
3 Wheel Kit #01203
Brake Line Kits
2-Wheel and 3-Wheel Brake Line Kits are available to be
installed on your car or sold separately. The kits come
with all hard lines, fittings, a master cylinder and residual
valve if needed.
2 Wheel Kit #01184
3 Wheel Kit #01185
11
Chassis Components
Radiator Channels
Two sizes of
Aluminum
Radiator
Channels are
offered, 2” and
2 3/8”.
Flat Radiator Deflector
2” Channel #01174A
2 3/8” Channel #01175A
Torque Tube Hoop
0” Raised Rail #01173A
Lighten up with a titanium torque tube
hoop or keep a chromoly one on hand
as a replacement part. Ti22’s hoop
opening measures 6 7/8” center to
center and it 11 3/4” tall.
1” Raised Rail #01204A
PART ID
MATERIAL
01033C
Chromoly
01033T
Titanium
“I wish I would have put
the car together sooner
cause I think I am going
to be able to really get
this car to work well
and win many races.”
Andre Layfield - Grafton, WV
Justin Henderson - Sioux Falls, SD
12
Body Panels
NEW 2012 GF1 Body
The new 2012 GF1 Body is contoured for performance and made from high quality multi-layer
fiberglass for maximum durability. Unique lines are
precisely positioned to generate downforce where
needed. GF1 body panels are offered in Black,
White, Orange, Navy, Yellow and Red. Custom colors
can be accomodated upon request.
08004 - Hood
08044 - RS Radius Rod Cover
08025 - RS Rockguard
08014 - Nose
08045- LS Radius Rod Cover
08052 - 1-Piece Dash
Cody Darrah - Kasey Kahne Racing
13
08036 - LS Sail Panel
Body Panels
Dzus Components
Keep some extra Dzus Components
in stock for replacement needs or
upgrade to the Heavy Duty Plates
where needed.
01138 - Standard Dzus Plate
01139 - Heavy Duty Dzus Plate
01140 - Dzus Spring
01141 - Dzus Rivet
Lower Kick Panels
The GF1 Lower Kick Panels are
available in standard lengths as
well as the RS Full Enclosure
Panel. The LS panel is offered for
standard and raised rail cars.
08061 - 0” Raise LS Panel
08062 - 1/2” Raise LS Panel
08063 - 1” Raise LS Panel
01142 - Dzus Button, 0.500
Gauge Panel
08060 - RS Lower Kick Panel
08065 - RS Full Enclosure Panel
Ti22’s gauge panel is for
2 5/8” gauges and comes
with 2 Dzus Tabs.
# 01128A
Floor Pan
Gauges sold separate
#08064A
RS Full Enclosure Shown
“...the car was amazing. it has so
much sidebite to the point that I
have never felt so comfortable in a
car like I did in that, through the
slick. I could stick it thru the middle
of the black slick and just drive
straight off the corner”
Barry Martinez - Burlington, WA
Matt Young - Sydney, Australia
14
Body Panels
Replacement Body Panels & Accesories
The 2010 GF1 Body Panels are available upon request. If possible,
please reference the Part # and Description when placing orders.
08003 - Shark II Hood
08024 - Standard RS Rockguard
08002 - Shark I Hood
08037 - LS Safety Cage Panel
08013 - Drop Nose
08042 - RS Radius Rod Cover
08051 - 2-PC Dash
08043 - LS Radius Rod Cover
15
Body Panels
JEI Replacement Body Panels
The body panels listed below will fit most JEI Chassis.
08000 - Hood
08010 - Nose
08030 - LS Sail Panel,
Long Cage
08031 - LS Sail Panel,
Standard Cage
08040 - RS Radius Rod Cover
08050 - Dash
08020 - RS Armguard, Long Cage
08041 - LS Radius Rod Cover
08021 - RS Armguard, Standard Cage
08022 - RS Armguard, Long Cage, Deep Dish
08035 - LS Safety Cage
Panel, Standard Cage
08034 - LS Safety Cage
Panel, Long Cage
08023 - 09 RS Armguard - Standard Cage
08033 - LS Enclosure Panel, Standard Cage
16
Chassis Repair
Below are a list of the common tabs and brackets on the GF1 Chassis.
Please reference the diagram and image below to identify the item you
need. If you don’t see the part listed below, call us!
Lower Tank
Mount
Rear Brake
Line Tab
P
Radius Rod Tube
G
Q
A
Rear
Wing Tab
C
J Shifter Bracket
Motor Mount
Tab
Nose Wing Mount
L
K
Lower
Ladder Tab
Front Brake
Line Tab
M
Top Tank Mount
Upper Ladder
Mount
I
Stop Pad
D
N
Nerf Spud
Rear Bumper
Socket
F
E
H
B
Wing Cylinder Tab
Top Wing Mount
B
H
C
I
J
A
M
E
L
N
P
K
F
17
D
Q
G
GF1 Chassis Apparel
GF1 C hassis Wrap T-Shirt
The new GF1 Wrap T-Shirt features "The
Winning Frame of Mind" on the front and
the website on the back. The GF1 Logo
wraps around the side.
Color: Black and Charcoal. Sizes: S - 3XL
#0927
GF1 Chassis T-Shirt
The GF1 t-shirt is made from ringspun cotton
for ultimate softness and durability. The front
features a distressed GF1 Chassis logo.
Color: Heather Charcoal. Sizes: S - 3XL
#0923C
GF1 Chassis Hoodie
Sweatshirt is available in Charcoal Heather
and features a distressed GF1 logo.
Sizes: S - 2XL
#0924C
GF1 Chassis Hat
Flexfit hat features the GF1 logo on the left
side panel and the GF1 website on the back.
Sizes: S/M or L/XL
#0932B
18
Terms and
Dealers
& Dealers
Prices: All prices, specifications and part numbers are subject to change without notice.
Payment Methods Accepted: We accept cash, checks and all major credit cards.
Custom Orders: Custom orders require a 50% deposit at the time the order is placed.
Sales Tax: Ti22 is required to charge applicable Pennsylvania sales tax on every item for which a sales tax
exemption certification has not been provided (PA sales only). Any purchases shipped out of PA may be subject to
the sales tax in the state of delivery.
Deposit: Every car ordered requires a $1500 deposit upon order placement. The deposit initiates the order and
the car is added to the production schedule at that time.
Final Payment: The final balance is due before the car can be picked up. Customers will be notified a few days
in advance when the car will be completed and a final invoice will be given. Shipping or pickup times will be
discussed at this time.
GF1 Chassis Dealers
NEW YORK
Mucci Motorsports
230 Commerce Blvd.
Liverpool, NY 13088
315-457-7827
TR Racing Products
157 Moore Hill Rd.
Stephentown, NY 12168
OHIO
Kistler Racing Products
1263 CR 232
Fremont, OH 43420
419-355-1843
419-332-8855 FAX
kistlerracingproducts.com
PENNSYLVANIA
Kreitz Oval Track Parts
785 Fritztown Road
Sinking Spring, PA 19608
610-678-5325
610-678-8690 FAX
kreitzovaltrackparts.com
SOUTH DAKOTA
The Speed Center LLC
105 North Cambell
Rapid City, SD 57701
605-348-3850
605-718-0832 FAX
TEXAS
M&R Performance
3911 Brazos Ave
Odessa, TX 79764
432-438-3485
WASHINGTON
SpeedMart Inc.
304 Lila Lane
Burlington, WA 98233
360-757-4473
360-757-7405 FAX
speedmartinc.com
AUSTRALIA
Parr Motorsports
12 Lipton Drive
Thomastown, VIC 3074
03-9460-7798
03-9460-8443 FAX
parrmotorsports.com
Rocket Industries
PO Box 6670
Blacktown, NSW 2148
02-8825-1900
02-8825-1911 FAX
rocketind.com
Kacee Frazier - Tulsa, OK
Phil Dietz - Billings, MT
Josh Baughman - Odessa, TX
Dylan Cisney Port Royal, PA
Tyler Blank - California, MO
19
Rick Lafferty - Pennington, NJ
Ti22 Performance Inc.
100 Halstead Blvd., Zelienople, PA 16063
724-453-2307 Phone 724-452-0217 Fax
www.ti22performance.com - [email protected]