Atlas Copco Screwdrivers

Transcription

Atlas Copco Screwdrivers
Atlas Copco Screwdrivers
Securing productivity from 0.005 Nm
0.005 Nm
0.010 Nm
0.1 Nm
0.5 Nm
1 Nm
5 Nm
12 Nm
2
AT L A S C O P C O S C R E W D R I V E R S
Contents
Introducing five levels of functionality
Level 1. Torque control
n LUM pneumatic screwdriver
n EBL Standard electric brushless screwdriver
n BCP Battery clutch screwdriver
4–5
6–9
Level 2. Batch count + Torque control
n EBL Advanced electric brushless screwdriver
10 – 13
Level 3. Joint control + Batch count + Torque control
n Tensor DL electric screwdriver
n MicroTorque TM electric screwdriver
14 – 17
Level 4. Critical fastening + Joint control
+ Batch count + Torque control
n Tensor SL electric screwdriver
n MicroTorqueTM electric screwdriver
Level 5. Zero fault fastening
n ToolsNet PF
n ToolsTalk MT Net
18 – 21
22 – 23
Technical data, ordering numbers and accessories
24 – 37
Screwdriver bits
38 – 42
Vibration and noise emission values
43
AT L A S C O P C O S C R E W D R I V E R S
3
Five levels of functionality
For every low-torque assembly need, the Atlas
­Copco screwdriver range range has a solution
– from ultra-low torque timepiece assembly to
­industrial scale electronics production. The range
features inno­vative technology and advanced
­control capabilities, combined with unrivalled
­ergonomics.
Level 5: Zero fault fastening
You need zero fault fastening plus level 4 ­functionality.
Level 4: Critical fastening
Level 3: Joint control
You need fastening that ensures joint integrity, plus level
2 functionality.
Levels
You need critical fastening plus level 3 ­functionality.
Level 2: Batch count
You need to know that every screw has been fastened,
plus level 1 functionality.
Level 1: Torque control
You need precision fastening, cycle after cycle. Torque
must be accurate and consistent.
4
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
1
LEVEL
LEVEL
LEVEL
LEVEL
5
4
3
2
Functionality
AT L A S C O P C O S C R E W D R I V E R S
5
The EBL electric screwdriver is in
line with Atlas Copco’s reputation.
With this tool I get a significant
process improvement, thanks to the
improved quality of the fastening.
This is a result of the b
­ etter torque
accuracy and consistency. The EBL
will also increase productivity because it is light, very easy to handle
and more comfortable to use.
Mr Jesus Reyes, Project Engineer, Valeo Mexico.
6
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
1 – TORQUE control
Functionality level 1
g
Torque control
For industrial assembly operations, accurate fastening and productivity go hand-in-hand.
The application of accurate and consistent torque on high-volume production applications
is crucial to efficient assembly.
Accurate and consistent torque control reduces customer
warranty claims and production costs, improves productivity and minimizes production line downtime.
Problem:Repetitive stress injuries and fatigue.
Solution:Screwdrivers with fast clutch release, ­
ergonomic ­design and soft, warm grips for ­
optimum operator comfort.
Problem:Damage to plastic threads and delicate ­
components.
Solution: The Atlas Copco soft-stop feature reduces the shock levels transmitted to delicate joints ­during the tightening cycle.
Problem:High running costs for tools.
Solution:Tools designed to last for many years with low ­service and maintenance costs.
Problem:High noise levels in the working environment.
Solution: EBL screwdriver – quiet operation thanks to
brushless motor.
AT L A S C O P C O S C R E W D R I V E R S
7
Assembly needs:
You need precision fastening, cycle after cycle.
Torque must be accurate and consistent.
Atlas Copco screwdriver solutions:
LUM, LTV, EBL and BCP.
LUM/LTV pneumatic
screwdrivers
EBL standard electric
brushless screwdrivers
BCP battery clutch
screwdrivers
• From 0.025 to 15.5 Nm
• From 0.05 to 4.5 Nm
• From 0.8 to 12 Nm
• Rapid shut-off
• Rapid shut-off
• Ergonomic pistol-grip design
• Low reaction impulse
• Brushless motor – longer lifespan
• Low noise level
• Low noise level
•7 brushless models offering variable
speed with a speed setting unit
• Operator comfort
• Unique non-tamper torque setting
•Choice of two 18 V Li-Ion batteries:
• Lubrication-free
• Lever start or push start
1.3 Ah Flat Pack or 2.6 Ah Big Pack
• Soft stop options
• Vacuum pick-up accessories
•Light in front to illuminate work piece
•Vacuum pick up accessories for
LUM 02
• Soft stop versions
• Torque OK/NOK light with optional
buzzer
• ESD and UL approved
• ESD approved
For technical data, see pages 28 – 29
For technical data, see pages 24 – 27
•Battery can be mounted in two
­directions
•Low noise level
For technical data, see pages 30
ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from
the tools. In practice it certifies that at no point will the material
of the equipment hold an electrostatic potential above 100 V for
more than 2 seconds.
8
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
1 – TORQUE control
AT L A S C O P C O S C R E W D R I V E R S
9
EBL screwdrivers had the functionality we needed when we built our
new LCD assembly lines. D
­ urability,
quiet operation and batch count
­capabilities – in combination with
line control – made the screwdriver
the ideal choice, making sure we
­never miss a screw.
Mr Marek Blaha, LCD Production Division ­General
Manager, Sony Slovakia.
10
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
2 – BATCH count
Functionality level 2
g
Batch count + Torque control
Eliminate the problem of missing screws with batch count functionality. Complex fastening ­regimes with multiple screws and high-speed production can lead to missed screws and
­compromised quality.
Get it right the first time round with batch count and line
control functionality.
Problem: On fast moving assembly lines, operators can miss screws.
Solution: Screw counting capability with operator ­
feedback signal.
counting?
Eliminate the problem straight out of the box with the
Atlas Copco EBL advanced electric brushless screwdriver.
Problem: Operator needs to paint every screw in order to check each one is fastened.
Solution: Screw counting function and line control capability. When all the screws are in place, the screwdriver sends a signal to the line and next batch arrives.
Does your production process require screw
1...
...2...
...3...
...4 Batch OK
Screw counting
AT L A S C O P C O S C R E W D R I V E R S
11
Assembly needs:
You need precision fastening, cycle after cycle. Torque must
be accurate and consistent. You also need batch count
­functionality.
Atlas Copco screwdriver solution:
EBL – advanced electric brushless screwdriver.
EBL – advanced electric brushless screwdriver
RE Drive
• From 0.05 to 4.5 Nm
• Batch count functionality
• Rapid shut-off
• Tightening cycle time programming
• Brushless motor – longer lifespan
• I/O digital signals for line control
• Low noise levels
• Unique non-tamper torque setting
• Lever start or push start
• Vacuum pick-up accessories
• Soft stop versions
• Reporting models
• ESD and UL approved
For technical data, see pages 28 – 29
ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from
the tools. In practice it certifies that at no point will the material
of the equipment hold an electrostatic potential above 100 V for
more than 2 seconds.
12
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
2 – BATCH count
AT L A S C O P C O S C R E W D R I V E R S
13
We need to identify that operators
correctly install the screws in one
of our critical products. The MicroTorque’s angle control functionality is amazingly precise and has
helped us to reduce scrapped parts.
Additionally, the robust design of
the screwdriver makes it the most
­durable we have ever had.
Mr Sam Zhao
Equipment Maintenance
Manager Schneider Electric, China.
14
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
3
– JOINT CONTROL
Functionality level 3
g
Joint control + Batch count + Torque control
Complex assembly, requiring multiple torque settings within the same cycle sequence, can be
time consuming to execute correctly.
Do it automatically with level 3 functionality – torque settings change sequentially, eliminating operator errors –
while process control detects cross-threaded joints and
angle control eliminates assembly errors.
Problem: Cross-threading of joints.
Solution: Detection of cross-threading by controlling the torque level during the rundown stage of the tightening cycle.
Problem: Wrong screw in the wrong place.
Solution: By programming the angle according to the screw length the system detects if the screw is installed in the right place, and gives opera
tor feedback.
Problem: Several tools required for different types of joint.
Solution: Use one tool that can be programmed to ­
handle different torque settings.
Problem: Stripped screw in sensitive plastics.
Solution: Programmable speed in the second stage of the­­tightening.
AT L A S C O P C O S C R E W D R I V E R S
15
Assembly needs:
You need precision fastening, cycle after cycle. Torque must
be a
­ ccurate and consistent, batch count and securing the
joint are also essential.
Atlas Copco screwdriver solutions:
Tensor DL and MicroTorque TM.
Tensor DL electric screwdriver
• From 0.3 to 12 Nm
• Lever start or push start
• Ergonomics design
• Signal lights
• Front lights
• ESD approved
MicroTorque ETD M-ABL Ergo
electric screwdrivers
MicroTorque ETD M 27 ABL
electric screwdrivers
• From 0.1 to 0.8 Nm
• From 0.075 to 0.27 Nm
• Lever start or push start
• Prepared for vacuum pick-up
• Prepared for vacuum pick-up
• Angle encoder
• Angle encoder
For technical data, see pages 35 – 37
MicroTorque controller
• One to eight tightening steps
Tensor DL advanced controller
• Up to 32 parameter sets
• Up to 10 parameter sets
• Line control
• Tool service indicator
• LED display
• LED display
• Configurable display
• Line control
• Compact controller
• Autoset
• Up to 10 tightening sequences
For technical data, see page 32
For technical data, see pages 35 – 37
ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from
the tools. In practice it certifies that at no point will the material
of the equipment hold an electrostatic potential above 100 V for
more than 2 seconds.
16
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
3
– JOINT CONTROL
AT L A S C O P C O S C R E W D R I V E R S
17
In order to maintain our competitiveness and achieve better assembly
quality, we installed four fixtured
Micro­Torque screwdrivers. Working
as multiple spindles within one automated assembly station, we significantly increased productivity and by
detecting common assembly problems, we now have documentable
process control.
Mr Luis Marques, Manufacturing Engineer, ­Visteon
Portugal.
18
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
4 – CRITICAL FASTENING
Functionality level 4
Critical fastening + Joint control + Batch count + Torque control
g
For the most demanding fastening scenarios, the Atlas Copco screwdriver range offers tools for
performing safety and mission-critical assembly.
Capable of handling multiple parameter sets sequentially,
producing detailed information for tightening analysis and
­allowing full traceability, these transducerized tools represent state-of-the-art control and precision.
Problem: Operator has to use a click wrench after ­
tightening to check fastening is correct.
Solution: Using a high-accuracy screwdriver eliminates the need to use a click wrench.
Problem: The assembly of safety-critical components needs to be operator independant.
Solution:Transducerized screwdrivers deliver the ­
highest level of accuracy and allow ­
comprehensive data collection.
Problem: Assembling safety-critical or delicate plastic components requires the highest level of ­
tightening accuracy.
Solution: Choose an Atlas Copco transducerized screw-
driver – the only type of screwdriver that can perform repeated ­fastening with industry
leading accuracy.
Problem: Need to increase cycle rate – automation.
Solution: Use fixtured tools, controllers equipped with I/O bus and network integration.
AT L A S C O P C O S C R E W D R I V E R S
19
Assembly needs:
You need precision fastening, cycle after cycle. Torque
must be a
­ ccurate and consistent, batch count and securing
the joint are also essential. In addition you need to ensure
­critical fastening.
Atlas Copco screwdriver solutions:
Tensor SL and MicroTorqueTM ETF MT.
Tensor SL electric screwdriver
MicroTorque ETF MT electric screwdriver
• From 0.3 to 12 Nm
• From 0.005 to 5 Nm
• Lever start or push start
• Fixtured screwdriver
• Ergonomic design
• Built-in angle encoder
• Signal lights and buzzer
• Longer durability
• Front lights
• ESD approved
Tensor SL controller
MicroTorque controller
• One to eight tightening steps
• Up to 16 parameter sets
• Up to 250 parameter sets
• Line control
• Tightening status storage: 5000
• LED display
• Up to 99 jobs
• Configurable display
• Cell programming
• Compact controller
•Logic configurator
• Up to 10 tightening sequences
•Graph model with color display
For technical data, see page 35 – 37
For technical data, see page 33 – 34
ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from
the tools. In practice it certifies that at no point will the material
of the equipment hold an electrostatic potential above 100 V for
more than 2 seconds.
20
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
4 – CRITICAL FASTENING
AT L A S C O P C O S C R E W D R I V E R S
21
Visualization of the assembly sequence makes work much easier, prevents p
­ roduction errors and improves
product quality. We like using Atlas
Copco ­electric screwdrivers. With
Tensor tools we are always in full
control of the tightening processes.
Mr Gerhard Visser, Manager, P
­ ilot Production, Lenze
Drive Systems GmbH, Aerzen, Germany
22
AT L A S C O P C O S C R E W D R I V E R S
LEVEL
5 – ZERO FAULT FASTENING
Functionality level 5
g
Zero fault fastening
Zero fault fastening is now easily achievable thanks to Atlas Copco’s ToolsNet software. Centralized
trend monitoring of production line data allows problem areas to be identified and processes to be
streamlined.
Real-time data collection and analysis allows adjustments to be made directly to the production process.
The system allows full traceability and auditing, allowing
compliance with the most challenging quality control programmes.
Take full control with ToolsNet
• Collect data for process improvement
• Access historical data and statistics
• Historical and real-time data presentation
• Full process traceability
Traceability minimizes recall costs
Data can be presented historically or in real-time and
shift ­reports are easily generated to satisfy production
­managers.
ToolsTalk MT Net
Data collection software for the MT screwdriver range.
In the event of warranty recalls, the result database
provides access to critical information which can easily
minimize the extent of any recall leading to an overnight
payback on your investment.
ToolsNet PF W10
Data collection software for the Tensor SL screwdriver.
AT L A S C O P C O S C R E W D R I V E R S
23
LUM Pneumatic Screwdrivers
Pistol grip shut-off models
Pistol grip
Balanced pistol grip
Torque range
Soft joint
Nm in lb
Model
Free
speed
r/min
Multiple air inlet
Air
consumption at
free speed
Weight
l/s cfm
kg Ib
Length
mm
Air
inlet
thread
in
Distance
centre
to side
mm
Ordering No.
Pistol grip models with trigger start
LUM22 HR3
0.6 - 3
5.3 - 26.5
2200
7.5
16
0.85
1.9
186
1/4
18
8431 0269 00
LUM22 HR3-RE
0.6 - 3
5.3 - 26.5
2200
7.5
16
0.85
1.9
186
1/4
18
8431 0278 63
LUM22 HR4
0.6 - 4
5.3 - 35.4
1650
7.5
16
0.85
1.9
186
1/4
18
8431 0269 02
LUM22 HR4-RE
0.6 - 4
5.3 - 35.4
1650
7.5
16
0.85
1.9
186
1/4
18
8431 0278 65
LUM22 HR6
1.5 - 6.5
13.3 - 57.5
1150
7.5
16
0.85
1.9
186
1/4
18
8431 0269 01
LUM22 HR6-RE
1.5 - 6.5
13.3 - 57.5
1150
7.5
16
0.85
1.9
186
1/4
18
8431 0278 64
Pistol grip models with trigger and push start
LUM22 HR3-P
0.6 - 3
5.3 - 26.5
2200
7.5
16
0.85
1.9
186
1/4
21
8431 0269 06
LUM22 HR4-P
0.6 - 4
5.3 - 35.4
1650
7.5
16
0.85
1.9
186
1/4
21
8431 0269 08
LUM22 HR6-P
1.5 - 6.5
13.3 - 57.5
1150
7.5
16
0.85
1.9
186
1/4
21
8431 0269 07
LUM22 HR10-P
3.5 - 10
31 - 88.5
750
7.5
16
1
2.2
218
1/4
21
8431 0269 09
Balanced pistol grip models with trigger start
LUM12 HRX1
0.6 - 1.8
5.3 - 15.9
2300
6
13
0.65
1.4
176
1/8
15
8431 0278 58
LUM12 HRX1-RE
0.6 - 1.8
5.3 - 15.9
2300
6
13
0.65
1.4
176
1/8
16
8431 0278 59
LUM12 HRX2
0.6 - 2.5
5.3 - 22.1
1650
6
13
0.65
1.4
176
1/8
16
8431 0278 56
LUM12 HRX2-RE
0.6 - 2.5
5.3 - 22.1
1650
6
13
0.65
1.4
176
1/8
16
8431 0278 57
LUM12 HRX3
0.4 - 3.5
5.3 - 31.9
1150
6
13
0.7
1.5
186
1/8
16
8431 0278 54
LUM12 HRX3-RE
0.4 - 3.5
3.5 - 31.9
1150
6
13
0.7
1.5
186
1/8
16
8431 0278 55
LUM12 HRX5
0.4 - 5
3.5 - 44.2
850
6
13
0.7
1.5
186
1/8
16
8431 0278 51
LUM12 HRX5-RE
0.4 - 5
3.5 - 44.2
850
6
13
0.7
1.5
186
1/8
16
8431 0278 53
LUM12 HRX5-170
0.4 - 5
3.5 - 44.2
170
6
13
0.7
1.5
196
1/8
16
8431 0278 47
LUM12 HRX5-350
0.4 - 5
3.5 - 44.2
350
6
13
0.7
1.5
186
1/8
16
8431 0278 48
LUM12 HRX5-350-RE
0.4 - 5
3.5 - 44.2
350
6
13
0.7
1.5
186
1/8
16
8431 0278 49
LUM12 HRX8
1.5 - 8
13.3 - 70.8
500
6
13
0.7
1.5
186
1/8
16
8431 0278 60
LUM12 HRX8-RE
1.5 - 8
13.3 - 70.8
500
6
13
0.7
1.5
186
1/8
16
8431 0278 61
LUM12 HRX8-50
1.5 - 8
13.3 - 70.8
50
6
13
0.7
1.5
196
1/8
16
8431 0280 25
LUM12 HRX8-110
1.5 - 8
13.3 - 70.8
110
6
13
0.7
1.5
196
1/8
16
8431 0280 27
LUM22 HRX2
1.2 - 2a
10.6 - 17.7
4500
9
19
0.9
2
187
1/4
18
8431 0269 29
1.1 - 2.6a
9.7 - 23
3200
9
19
0,9
2
187
1/4
18
8431 0278 85
LUM22 HRX3
0.6 - 3a
5.3 - 26.5
2250
9
19
0.9
2
187
1/4
18
8431 0269 22
LUM22 HRX3-RE
0.6 - 3a
5.3 - 26.5
2250
9
19
0.9
2
187
1/4
18
8431 0278 70
LUM22 HRX4
0.6 - 4a
5.3 - 35.4
1650
9
19
0.9
2
187
1/4
18
8431 0269 20
LUM22 HRX6
1.5 - 6.5a
13.3 - 57.5
1100
9
19
0.95
2.1
197
1/4
18
8431 0269 21
LUM22 HRX6-RE
1.5 - 6.5a
13.3 - 57.5
1100
9
19
0.95
2.1
197
1/4
18
8431 0278 71
LUM22 HRX2-3200
Balanced grip models with trigger start and soft stop function
LUM10 HRX1-SS
0.2 - 0.6
1.8 - 5.3
800
6
13
0.65
1.4
176
1/8
16
8431 0280 02
LUM12 HRX1-SS
0.6 - 1.3
5.3 - 11.5
800
6
13
0.65
1.5
176
1/8
16
8431 0280 01
Multiple air inlet models and air-on-top models with trigger start
a
LUM12 HRF2
0.6 - 2.5
5.3 - 22.1
1650
6
13
0.65
1.4
190
1/8
16
8431 0269 31
LUM12 HRF3
0.4 - 3.6
3.5 - 31.9
1150
6
13
0.7
1.5
200
1/8
16
8431 0269 32
LUM12 HRF5
0.4 - 5
3.5 - 44.2
850
6
13
0.7
1.5
200
1/8
16
8431 0269 33
LUM12 HRF8
1.5 - 8
13.3 - 70.8
500
6
13
0.7
1.5
200
1/8
16
8431 0269 34
1.4 - 4 Nm with spring, Ordering No. 4210 1831 00. Recommended hose size mm: LUM10/12/21 = 6, LUM22/25 = 8, LUM22 HR/HRX10 = 10
All models: Are reversible and have quick change chuck. All data at an air pressure of 6.3 bar. For operator comfort support handle recommended for high torque,
see Optional Accessories.
24
AT L A S C O P C O S C R E W D R I V E R S
TECHNICAL DATA / ACCESSORIES
LUM Pneumatic Screwdrivers
Straight shut-off models
Straight models with lever start
Straight models with push start
Torque range
Soft joint
Model
Nm in lb
Free
speed
r/min
Air
consumption at
free speed
Weight
l/s cfm
kg Ib
Length
mm
Air
inlet
thread
in
Distance
centre
to side
mm
Drive
type
Ordering No.
Straight models with push start and button reverse
LUM 02 PR04-1800
0.03 - 0.32
0.027 - 0.29
1800
2.2
4.7
0.16
0.35
165
*
10
4 mm HM
8431 0146 02
LUM 02 PR04-1200
0.03 - 0.32
0.027 - 0.29
1200
2.2
4.7
0.16
0.35
165
*
10
4 mm HM
8431 0146 04
LUM 02 PR07-500
0.025 - 0.6
0.023 - 0.54
500
2.2
4.7
0.16
0.35
165
*
10
4 mm HM
8431 0146 06
LUM 02 PR07-350
0.025 - 0.6
0.023 - 0.54
350
2.2
4.7
0.16
0.35
165
*
10
4 mm HM
8431 0146 08
LUM 02 PR04-1800-Q
0.03 - 0.32
0.027 - 0.29
1800
2.2
4.7
0.16
0.35
165
*
10
3 mm Hex
8431 0146 12
LUM 02 PR04-1200-Q
0.03 - 0.32
0.027 - 0.29
1200
2.2
4.7
0.16
0.35
165
*
10
3 mm Hex
8431 0146 14
LUM 02 PR07-500-Q
0.025 - 0.6
0.023 - 0.54
500
2.2
4.7
0.16
0.35
165
*
10
3 mm Hex
8431 0146 16
LUM 02 PR07-350-Q
0.025 - 0.6
0.023 - 0.54
350
2.2
4.7
0.16
0.35
165
*
10
3 mm Hex
8431 0146 18
LUM10 PR03
0.1 - 1.5
0.8 - 13
300
3
6
0.4
0.9
206
1/8
15
1/4 Hex
8431 0146 05
LUM10 PR05
0.1 - 1.5
0.8 - 13
460
3
6
0.4
0.9
206
1/8
15
1/4 Hex
8431 0146 09
LUM10 PR12
0.1 - 1.1
0.8 - 10
1200
3
6
0.4
0.9
196
1/8
15
1/4 Hex
8431 0146 17
LUM10 PR21
0.1 - 0.7
0.8 - 6
2000
3
6
0.4
0.9
196
1/8
15
1/4 Hex
8431 0146 25
LUM12 PR1
0.6 - 1.6
5.3 - 14.2
1900
4.5
10
0.55
1.2
195
1/8
15
1/4 Hex
8431 0278 29
LUM12 PR2
0.4 - 2.3
3.5 - 20.4
1450
4.5
10
0.55
1.2
195
1/8
15
1/4 Hex
8431 0278 27
LUM12 PR3
0.4 - 3.2
3.5 - 28.3
1000
4.5
10
0.55
1.2
195
1/8
15
1/4 Hex
8431 0278 26
LUM12 PR4
0.4 - 4.2
3.5 - 37.2
750
4.5
10
0.55
1.2
195
1/8
15
1/4 Hex
8431 0278 25
LUM12 PR5
0.4 - 5
3.5 - 44.2
450
4.5
10
0.55
1.2
195
1/8
15
1/4 Hex
8431 0278 30
LUM22 PR2-3500
1.1 - 2.5
9.7 - 22.1
3500
7
15
0.75
1.7
211
1/4
15
1/4 Hex
8431 0278 89
LUM22 PR3
0.6 - 3.2
5.3 - 28.3
2100
7
15
0.75
1.7
211
1/4
15
1/4 Hex
8431 0269 61
LUM22 PR4
0.5 - 4.0
4.4 - 35.4
1600
7
15
0.75
1.7
211
1/4
15
1/4 Hex
8431 0269 55
LUM22 PR4-2300
0.7 - 4.5
5.9 - 38.2
2300
7
15
0.75
1.7
211
1/4
15
1/4 Hex
8431 0278 81
LUM22 PR5-350
0.4 - 5.0
3.5 - 44.2
350
7
15
0.75
1.7
211
1/4
15
1/4 Hex
8431 0269 60
LUM22 PR6
1.5 - 6.0
13.3 - 53.1
1000
7
15
0.75
1.7
211
1/4
15
1/4 Hex
8431 0269 56
LUM22 PR8-1100
1.5 - 8.0
13.3 - 70.8
1100
7
15
0.9
2.0
224
1/4
15
1/4 Hex
8431 0278 88
Straight models with push start, button reverse and soft stop function
LUM10 PR1-SS
0.2 - 0.6
1.8 - 5.3
460
3
6
0.4
0.9
206
1/8
15
1/4 Hex
8431 0280 06
LUM12 PR1-SS
0.6 - 1.3
5.3 - 11.5
800
4.5
10
0.55
1.2
195
1/8
15
1/4 Hex
8431 0280 05
8431 0278 35
Straight models with lever start and without push start
LUM12 SR1
0.6 - 1.8
5.3 - 15.9
2200
6
13
0.6
1.3
217
1/8
15
1/4 Hex
LUM12 SR2
0.5 - 2.5
4.4 - 22.1
1700
6
13
0.6
1.3
217
1/8
15
1/4 Hex
8431 0278 34
LUM12 SR3
0.4 - 3.5
3.5 - 31
1200
6
13
0.6
1.3
217
1/8
15
1/4 Hex
8431 0278 33
LUM12 SR4
0.4 - 4.5
3.5 - 39.8
850
6
13
0.6
1.3
217
1/8
15
1/4 Hex
8431 0278 32
LUM22 SR3
0.6 - 3.2
5.3 - 28.3
1950
7
15
0.8
1.8
239
1/4
16
1/4 Hex
8431 0269 44
LUM22 SR4
0.6 - 4
5.3 - 35.4
1500
7
15
0.8
1.8
239
1/4
16
1/4 Hex
8431 0269 46
LUM22 SR5-300
0.4 - 5
3.5 - 44.2
300
7
15
0.8
1.8
239
1/4
16
1/4 Hex
8431 0269 51
LUM22 SR6
1.5 - 6
13.3 - 53.1
1000
7
15
0.85
1.9
239
1/4
16
1/4 Hex
8431 0269 47
a
Front end 12.5 mm (4210 3918 01) included.
b
Optional front end 21 mm (4210 3918 02).
Recommended hose size mm: LUM10/12/21 = 6, LUM22 = 8, LUM37 = 10
ESD approved: LUM 10/21/12/22 SR/PR
All models are reversible and have quick change chuck.
SR-models have ring reverse control.
PR-models have push button reverse.
b
Air inlet thread M5. Nipple and coupling included accessory for all LUM 02 models, hose size diameter 6 mm.
AT L A S C O P C O S C R E W D R I V E R S
25
LTV Pneumatic Screwdrivers
Angle head models
Angle head
Torque range
Soft joint
Air
consumption at
free speed
Weight
l/s cfm
kg Ib
Length
mm
Air
inlet
thread
in
Angle head
centre
to side
mm
Angle
head
height
mm
Nm in lb
Free
speed
r/min
LTV009 R025-Q
0.6 - 2.5
5.3 - 22.1
1650
6
13
0.7
1.5
266
1/8
9
25
8431 0278 00
LTV009 R025-42
0.6 - 2.5
5.3 - 22.1
1650
6
13
0.7
1.5
266
1/8
9
25
8431 0278 01
LTV009 R025-6
0.6 - 2.5
5.3 - 22.1
1650
6
13
0.7
1.5
266
1/8
9
25
8431 0278 02
LTV009 R03-10
0.7 - 3
6.2 - 26.5
1400
6
13
0.7
1.5
266
1/8
9
25
8431 0278 23
LTV009 R035-Q
0.4 - 3.5
3.5 - 31
1100
6
13
0.7
1.5
266
1/8
9
25
8431 0278 03
LTV009 R035-42
0.4 - 3.5
3.5 - 31
1100
6
13
0.7
1.5
266
1/8
9
25
8431 0278 04
LTV009 R035-6
0.4 - 3.5
3.5 - 31
1100
6
13
0.7
1.5
266
1/8
9
25
8431 0278 05
LTV009 R05-Q
0.4 - 5
3.5 - 44.2
850
6
13
0.7
1.5
266
1/8
9
25
8431 0278 06
LTV009 R05-42
0.4 - 5
3.5 - 44.2
850
6
13
0.7
1.5
266
1/8
9
25
8431 0278 07
LTV009 R05-6
0.4 - 5
3.5 - 44.2
850
6
13
0.7
1.5
266
1/8
9
25
8431 0278 08
LTV009 R07-Q
1.1 - 7
9.7 - 61.9
500
6
13
0.7
1.5
266
1/8
9
25
8431 0278 09
LTV009 R07-42
1.1 - 7
9.7 - 61.9
500
6
13
0.7
1.5
266
1/8
9
25
8431 0278 10
LTV009 R07-6
1.1 - 7
9.7 - 61.9
500
6
13
0.7
1.5
266
1/8
11
28.5
8431 0278 11
LTV009 R08-6-200
1.3 - 9
11.5 - 79.6
200
6
13
0.7
1.5
266
1/8
11
28.5
8431 0278 24
LTV009 R09-Q
1.3 - 9
11.5 - 79.6
430
6
13
0.7
1.5
266
1/8
11
28.5
8431 0278 12
LTV009 R09-10
1.3 - 9
11.5 - 79.6
430
6
13
0.7
1.5
266
1/8
11
28.5
8431 0278 13
LTV009 R09-42
1.3 - 9
11.5 - 79.6
430
6
13
0.7
1.5
266
1/8
11
28.5
8431 0278 15
LTV009 R09-42M
1.3 - 9
11.5 - 79.6
430
6
13
0.7
1.5
266
1/8
11
28.5
8431 0278 16
LTV009 R09-6
1.3 - 9
11.5 - 79.6
430
6
13
0.7
1.5
266
1/8
11
28.5
8431 0278 17
LTV009 R11-Q
1.3 - 11
11.5 - 97.3
320
6
13
0.8
1.8
266
1/8
11
28.5
8431 0278 19
LTV009 R11-10
1.3 - 11
11.5 - 97.3
320
6
13
0.8
1.8
266
1/8
11
28.5
8431 0278 20
LTV009 R11-42
1.3 - 11
11.5 - 97.3
320
6
13
0.8
1.8
266
1/8
11
28.5
8431 0278 21
LTV009 R11-6
1.3 - 11
11.5 - 97.3
320
6
13
0.8
1.8
266
1/8
11
28.5
8431 0278 22
Model
Ordering No.
Shut-off angle models
ESD approved: LTV 009. Recommended hose size mm: LTV009 = 6
All LTV 009 models are ESD approved
All models: Are reversible.
- 42 = 1/4” female hexagon drive for bits.
- 10 = 3/8” square drive.
- 6 = 1/4” square drive for sockets.
- Q = 1/4” quick change chuck.
26
AT L A S C O P C O S C R E W D R I V E R S
TECHNICAL DATA / ACCESSORIES
Accessories – LUM/LTV
Designation
Exhaust hose
Support handle
ESD hose
Torque arms
adapters
Installation
proposal
ESD approved
pistol handle
LUM12 HRX/HRF
4210 2052 00
4110 1355 92
8202 0501 06
–
8202 1180 67
4210 3616 04
LUM22 HR 3, 4, 6
4210 2052 00
4110 1355 92
8202 0501 10
–
8202 1180 77
4210 4337 04
LUM22 HR 10, 12
4210 2052 00
4110 1355 93
8202 0501 10
–
8202 1180 77
4210 4337 04
LUM22 HRX 3, 4, 6
4210 2052 00
4110 1355 92
8202 0501 10
–
8202 1180 77
4210 3616 04
LUM12 SR
4210 2052 00
–
8202 0501 06
4390 1735 52
8202 1180 67
–
LUM12 PR
4210 2052 00
–
8202 0501 06
4390 1735 53
8202 1180 67
–
LUM22 SR
4210 2053 00
–
8202 0501 10
4390 1735 51
8202 1180 77
–
LUM22 PR
4210 2053 00
–
8202 0501 10
4390 1735 54
8202 1180 77
–
LTV009
4210 2052 00
–
8202 0501 06
–
8202 1180 67
–
Accessories included
Clutch adjustment key
Exhaust hose
Included with all shut-off and slip clutch
tools.
Included with straight and air-on-top
models.
Quick change chuck
Hose nipple
Included with all straight and pistol grip
tools.
Included with all tools.
Suspension yoke
Vacuum screw pick-up
Quick change chuck kit
Angle-head for LTV009
Optional accessories
Model
RE-Conversion kits for LUM/LTV models
Ordering No.
Threaded clutch houses
Model
Ordering No.
LUM12 HRF
4210 3624 99
LUM12 PR/SR 1, 2, 3, 4
4210 4386 04
LUM12 SR
4210 4137 90
LUM12 HRX/HRF 1, 3, 5, 8
4210 4386 04
LUM22 SR
4210 2057 80
LUM22 HRX/HR 2, 3, 4, 6
4210 4386 04
LTV009
4210 4137 90
LUM22 HRX/HR 10, 12
4210 4392 03
LUM22 SR/PR 3, 4, 5, 6
4210 4383 04
LUM22 SR/PR 10, 12
4210 4383 03
Vacuum screw pick up LUM02
4210 4706 80
Angle head covers
Service kits
LTV009 R025-R07
4210 4115 00
Model
Ordering No.
LTV009 R08-R11
4210 4116 00
LUM12 HRX, HRF
4081 0247 90
LUM22 HR/HRX 3, 4, 6, 12
4081 0281 90
LUM22 HR/HRX 10
4081 0282 90
LUM12 SR
4081 0254 90
LUM12 PR
4081 0250 90
LUM22 PR/SR 3, 4, 6, 12
4081 0284 90
LUM22 PR/SR 10
4081 0285 90
LUM10 PR
4081 0070 90
LTV009
4081 0248 90
Protective covers
LUM22 HR
4210 3150 00
LUM22 HRX
4210 3151 00
LUM12 HRX
4210 3152 00
Suspension yoke for LTV009
4210 4461 80
Quick change chuck kit, extra wide diameter for easy handling
4210 2326 91
Angle-head for LTV009, 90° hex drive magnetic bit holder*
4210 3857 91
* Substitute for 4210 3857 XX angle heads.
AT L A S C O P C O S C R E W D R I V E R S
27
EBL Screwdrivers
EBL screwdriver
Torque
Type
Model
STANDARD
SOFT STOP
REPORTING
SOFT STOP
REPORTING
SOFT START
a
EBL03
EBL03-Q
EBL12
EBL12-1500
EBL20
EBL21-1500
EBL25
EBL35
EBL25-1500 a
EBL45 a
EBL03-SS
EBL12-SS
EBL20-SS
EBL25-SS
EBL35-SS
EBL03-RE
EBL03-Q-RE
EBL12-RE
EBL12-1500-RE
EBL20-RE
EBL21-1500-RE
EBL25-RE
EBL35-RE
EBL03-SS-RE
EBL12-SS-RE
EBL20-SS-RE
EBL25-SS-RE
EBL35-SS-RE
EBL12 ST
EBL25 ST
EBL35 ST
Ncm In Ib
0.05 - 0.3
0.05 - 0.3
0.2 - 1.2
0.2 - 1.2
0.5 - 2.0
0.5 - 2.1
1.0 - 2.5
1.0 - 3.5
1.0 - 2.5
1.0 - 4.5
0.05 - 0.3
0.2 - 1.2
0.5 - 2.0
1.0 - 2.5
1.0 - 3.5
0.05 - 0.3
0.05 - 0.3
0.2 - 1.2
0.2 - 1.2
0.5 - 2.0
0.5 - 2.1
1.0 - 2.5
1.0 - 3.5
0.05 - 0.3
0.2 - 1.2
0.5 - 2.0
1.0 - 2.5
1.0 - 3.5
0.2 - 1.2
1.0 - 2.5
1.0 - 3.5
0.4 - 2.7
0.4 - 2.7
1.8 - 10.6
1.8 - 10.6
4.5 - 18
4.5 - 19
8.8 - 22.1
8.8 - 31
8.8 - 22.1
8.8 - 39.8
0.4 - 2.7
1.8 - 10.6
4.5 - 18
8.8 - 22.1
8.8 - 31
0.4 - 2.7
0.4 - 2.7
1.8 - 10.6
1.8 - 10.6
4.5 - 18
4.5 - 19
8.8 - 22.1
8.8 - 31
0.4 - 2.7
1.8 - 10.6
4.5 - 18
8.8 - 22.1
8.8 - 31
1.8 - 10.6
8.8 - 22.1
8.8 - 31
Speed
r/min
870
870
910
1500
750
1500
930
700
1500
700
870
910
750
930
700
870
870
910
1500
750
1500
930
700
870
910
750
930
700
910
930
700
Weight
kg Ib
0.3
0.3
0.5
0.5
0.5
0.8
0.8
0.8
0.8
0.8
0.3
0.5
0.5
0.8
0.8
0.3
0.3
0.5
0.5
0.5
0.8
0.8
0.8
0.3
0.5
0.5
0.8
0.8
0.5
0.8
0.8
0.7
0.7
1.1
1.1
1.1
1.8
1.8
1.8
1.8
1.8
0.7
1.1
1.1
1.8
1.8
0.7
0.7
1.1
1.1
1.1
1.8
1.8
1.8
0.7
1.1
1.1
1.8
1.8
1.1
1.8
1.8
Length
mm
Bit
drive
Ordering No.
185
185
215
215
215
235
235
235
235
235
185
215
215
235
235
185
185
215
215
215
235
235
235
185
215
215
235
235
215
235
235
Wing type 4mm
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
Wing type 4mm
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
Wing type 4mm
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
Wing type 4mm
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
1/4" Hex
8431 0170 02
8431 0170 04
8431 0170 11
8431 0170 41
8431 0170 16
8431 0170 43
8431 0170 23
8431 0170 33
8431 0170 25
8431 0170 40
8431 0170 07
8431 0170 15
8431 0170 20
8431 0170 28
8431 0170 38
8431 0170 55
8431 0170 06
8431 0170 13
8431 0170 18
8431 0170 19
8431 0170 47
8431 0170 26
8431 0170 36
8431 0170 08
8431 0170 17
8431 0170 21
8431 0170 29
8431 0170 39
8431 0170 14
8431 0170 24
8431 0170 37
EBL 45 and EBL 25-1500 to be used with EBL Drive Plus.
- All tool models, drives and cables are ESD and UL certified.
- Tool box include cable for drive connection (standard models with 5 pins cable and reporting models with 6 pins cable).
28
AT L A S C O P C O S C R E W D R I V E R S
Drive to be used
EBL Drive
EBL Drive Plus
EBL RE Drive
ST controller
+ EBL Drive
TECHNICAL DATA / ACCESSORIES
Accessories – EBL
Screw pick-up system
Cable options
Picking and positioning of screws are many times crucial
for productivity in small screw assembly. The optional
equipment offers a vacuum pick-up system to simplify
pre-tightening preparations. The system consists of a
vacuum pump, adapters for the screwdriver a shaker tray
and grids for different screw dimensions.
Model
Vacuum pick‑up adapters
Screwdrivers can be equipped with vacuum pick‑up adapters ready to connect to a vacuum pump. The adapters are
delivered without nozzles.
Spiral cable, 1.3 m (5 pin)
4220 0347 00
Spiral cable, 1.3 m (6 pin)
4220 0349 00
Heavy duty, cable 2.0 m (5 pin)
4216 0132 00
Heavy duty, cable 2.0 m (6 pin)
4216 0133 00
Cable (ESD approved)
Nozzle blanks
They must be machined to fit the specific screw to be
picked up.
Ordering No.
Cable (not ESD approved)
Extension cableb 3.0 m (5 pin)
4220 0138 01
Extension cableb 3.0 m (6 pin)
4216 0115 00
b
Maximum total length 8 m.
ISO standard connectors
To build your own 22 V AC network. With our components
and an ordinary two core cable, min 1.5 mm2, you can
quickly arrange the electric supply for a series of screwdrivers.
Model
Ordering No.
Male plug
4220 0095 00
2-way female socket. For wall mounting (not ESD approved)
4220 0096 00
Angle head
Vacuum pump
Nozzle blank
Vaccum pick-up adapter
Model
Ordering No.
Vacuum pump – 220V
4220 0062 00
Vacuum pump – 115V
4220 0062 05
Vacuum pick-up adapter for EBL 03
4220 0080 30
Vacuum pick-up adapter for EBL 12/20
4220 0080 31
Vacuum pick-up adapter for EBL 21/25/35
4220 0080 33
Nozzle blank Ø 7.5 mm for EBL 03
4220 0067 03
Nozzle blank Ø 8 mm for EBL 12/20/21/25/35
4220 0070 03
Nozzle blank Ø 14 mm for EBL 12/20/21/25/35
4220 0072 03
Shaker tray
Angle head adapter
EBL screwdriver models EBL 25 and 35 can be equipped
with a 90° angle head for access in cramped quarters.
Model
Ordering No.
EBL screwdriver
4220 0081 02
Square drive 1/4” (06)
4210 4033 80
Hex bit drive 1/4” (42)
4210 4033 81
Hex quick change 1/4” (Q)
4210 4033 82
Adaptera (ESD approved)
4210 4609 80
a
Consists of a rubber box. A variety of interchangeable
rubber grid plates should be ordered separately. (see table
below)
Model
Ordering No.
Shaker tray
4220 0054 00
Need to be ordered separately.
Pistol grip handle
(ESD approved)
Service kits
Model
Ordering No.
Model
EBL 21, 25, 35
4220 0051 05
EBL
EBL 12, 20
4220 0051 04
Ordering No.
4216 6 0049 90
Grid plate
For screw size, mm
Ordering No.
1.2/1.4
4220 0055 00
1.7
4220 0056 00
2.0
4220 0057 00
2.3
4220 0058 00
2.6
4220 0059 00
3.0
4220 0060 00
4.0
4220 0061 00
Pistol grip handle
AT L A S C O P C O S C R E W D R I V E R S
29
BCP – Battery Clutch Screwdrivers
Model
Square drive
in
Torque range
Nm
ft lb
Torque ft Ib
Min
Max
Speed
r/min
Weight (excl. battery)
kg
Ib
Length/Height
mm
Ordering No.
BCP – shut-off brushless tools with variable speed
BCP BL2-I06
1/4
0.8
2.5
0.6
1.8
500 - 1550
0.86
1.89
200/188
8431 1273 00
BCP BL6-I06
1/4
2.0
6.0
1.5
4.4
300 - 1000
0.86
1.89
200/188
8431 1273 10
BCP BL8-I06
1/4
3.0
8.0
2.2
5.9
300 - 800
0.86
1.89
200/188
8431 1273 20
BCP BL12-I06
1/4
5.0
12.0
3.7
8.8
300 - 600
0.86
1.89
200/188
8431 1273 30
BCP BL-12L-I06
1/4
3.0
12.0
2.2
8.8
150 - 440
0.86
1.89
200/188
8431 1273 40
BCP BL-2L-I06
1/4
0.8
2.5
0.6
1.8
150 - 440
0.86
1.89
200/188
8431 1273 50
BCP BL-6L-I06
1/4
1.5
6.0
1.5
4.4
150 - 440
0.86
1.89
200/188
8431 1273 60
The tools are set at maximum speed at delivery.
Accessories – BCP Battery Clutch Screwdrivers
Battery charger
Support handle
Tool cover
Colour rings
18 V.
Battery
Battery
18 V, 2.6 Ah.
18 V, 1.3 Ah.
Battery cover
Battery cover
18 V, 2.6 Ah.
18 V, 1.3 Ah.
Speed setting unit
Suspension yoke
Weight
Miscellaneous
Ordering No.
Speed setting unit
4211 5462 80
Support handle
4211 5421 80
Tool cover protection
4211 5415 00
Battery cover protection flat pack
4211 5601 00
Battery cover protection big pack
4211 5602 00
Suspension bail
4211 5600 00
Colour ring – red
4211 5461 02
Colour ring – orange
4211 5461 03
Colour ring – green
4211 5461 04
Colour ring – blue
4211 5461 05
Colour ring – white
4211 5461 06
Colour ring – purple
4211 5461 07
Colour ring – grey
4211 5461 08
Current
V
Electric charge
Ah
kg
Ib
Charge time
min
Ordering No.
Li-Ion flat pack
18
1.3
0.37
0.81
35
4211 5426 82
Li-Ion big pack
18
2.6
0.63
1.39
70
4211 5426 83
Input
V / Hz
Output
V /A
kg
Ib
Ordering No.
EU-contact
230V / 50Hz
18V / 1.8A
0.61
1.34
4211 5428 80
UK-contact
230V / 50Hz
18V / 1.8A
0.61
1.34
4211 5428 81
US-contact
120V / 60Hz
18V / 1.8A
0.61
1.34
4211 5428 84
Battery
Charger
30
AT L A S C O P C O S C R E W D R I V E R S
Weight
TECHNICAL DATA / ACCESSORIES
Tensor DL Screwdrivers
Straight tool
Angle head tool
Torque range
Pistol grip tool
Weight
Nm
in Ib
Speed
r/min
ETD DL21-04-I06
1-4
8.8 - 35.4
1 600
0.6
1.3
235
18 / 19.5
8433 4014 25
ETD DL21-07-I06
2.2 - 7.5
19.5 - 66
970
0.6
1.3
235
18 / 19.5
8433 4017 31
ETD DL21-10-I06
3 - 10
26.6 - 88.5
720
0.6
1.3
235
18 / 19.5
8433 4019 10
Model
kg
Ib
Length
mm
CS distance
mm
Ordering No.
Straight tools with lever start
Push-to-start and front lights
ETD DL21-01-I06-PS
0.3 - 1.2
2.6 - 10
2 200
0.6
1.3
243
18 / 19.5
8433 4010 89
ETD DL21-04-I06-PS
1-4
8.8 - 35.4
1 600
0.6
1.3
242
18 / 19.5
8433 4014 91
ETD DL21-07-I06-PS
2.2 - 7.5
19.5 - 66
970
0.6
1.3
242
18 / 19.5
8433 4017 69
ETD DL21-10-I06-PS
3 - 10
26.6 - 88.5
720
0.6
1.3
242
18 / 19.5
8433 4019 25
ETV DL21-04-I06
1-4
8.8 - 35.4
1 600
0.7
1.5
268
9
8433 4004 47
ETV DL21-04-I06-QC
1-4
8.8 - 35.4
1 600
0.7
1.5
268
9
8433 4004 73
ETV DL21-04-06
1-4
8.8 - 35.4
1 600
0.7
1.5
268
9
8433 4004 91
ETV DL21-07-I06
2.2 - 7.5
19.5 - 66
970
0.7
1.5
268
9
8433 4007 66
ETV DL21-07-I06-QC
2.2 - 7.5
19.5 - 66
970
0.7
1.5
268
9
8433 4007 79
ETV DL21-07-06
2.2 - 7.5
19.5 - 66
970
0.7
1.5
268
9
8433 4007 94
ETV DL21-20-10
5 - 20
44.2 - 180
465
0,85
1,9
285
14
8433 4008 55
ETV DL21-20-B10
5 - 20
44.2 - 180
465
0,85
1,9
285
14
8433 4008 60
ETV DL21-10-I06
3 - 12
26.6 - 106.2
610
0.7
1.5
281
11
8433 4009 34
ETV DL21-10-I06-QC
3 - 12
26.6 - 106.2
610
0.7
1.5
281
11
8433 4009 61
ETV DL21-10-06
3 - 12
26.6 - 106.2
610
0.7
1.5
281
11
8433 4009 77
ETP DL21-04-I06
1-4
8.8 - 35.4
1 600
0.6
1.3
235
20
8433 4024 19
ETP DL21-07-I06
2.2 - 7.5
19.5 - 66
970
0.6
1.3
235
20
8433 4027 26
ETP DL21-10-I06
3 - 10
26.6 - 88.5
720
0.6
1.3
235
20
8433 4029 13
Angle head tools with lever
Pistol grip tools with lever start
Pistol grip (push-to-start and frontlights)
ETP DL21-01-I06-PS-H
0.3 - 1.2
2.6 - 10
2 200
0.6
1.3
243
20
8433 4020 77
ETP DL21-04-I06
1-4
8.8 - 35.4
1 600
0.6
1.3
242
20
8433 4024 66
ETP DL21-07-I06
2.2 - 7.5
19.5 - 66
970
0.6
1.3
242
20
8433 4027 53
ETP DL21-10-I06
3 - 10
26.6 - 88.5
720
0.6
1.3
242
20
8433 4029 28
ETV = CS distance over angle head.
Tensor DL Drive – the brain of the system
The DL Drive powers the screwdriver, controls the
tightening process, monitors the assembly process and
guides the operator to ensure the task is performed
“right first time”. The DL Drive communicates easily with
external sensors and PLCs for line control functionality,
and is designed to interface with accessories such as bit
selectors and audible and visible alarms.
DL Drive
Model
Ordering No.
DL Drive
D303-DL Basic
8433 4850 48
D313-DL Advanced
8433 4850 33
AT L A S C O P C O S C R E W D R I V E R S
31
Accessories – Tensor DL
DL Cable
DL spiral cable
Model
Bit selectors, 4 positions
Tensor DL pistol grip
RE-alarm
I/O expansion box
DL cable with 90°
connector
Ordering No.
Tensor
Quality Integrated Fastening accessories
Tool cable
3m
4220 2604 03
5m
4220 2604 05
10 m
4220 2604 10
15 m
4220 2604 15
Heavy duty cable
3m
4220 3265 03
5m
4220 3265 05
10 m
4220 3265 10
15 m
4220 3265 15
Cables with 90° connector
a
Model
Ordering No.
Bit selector
8433 0612 08
Bit selector pad doublea
4222 0933 92
RE-Alarm
8433 0560 03
I/O expansion box
8433 0564 38
Only compatible with Bit selector.
Accessory cables
Model
Ordering No.
3m
4220 3705 03
I/O bus cable 0.5 m
4222 0917 00
5m
4220 3705 05
I/O bus cable 1 m
4222 0917 01
10 m
4220 3705 10
I/O bus cable 3 m
4222 0917 03
15 m
4220 3705 15
I/O bus cable 5 m
4222 0917 05
I/O bus cable 10 m
4222 0917 10
I/O bus cable 15 m
4222 0917 15
I/O Termination plug
4222 0443 00
Spiral cable straight
5m
4220 3240 05
Spiral cable with 90° connector
5m
4220 3706 05
Extension cable
Pistol grip handdle
3m
4220 2795 03
5m
4220 2795 05
Model
Ordering No.
10 m
4220 2795 10
Pistol grip Tensor DL
4220 2743 90
ToolsTalk DS/DL software
Software
ToolsTalk DS/DL
Ordering No.
Swedish
8092 1138 60
English
8092 1138 62
German
8092 1138 64
French
8092 1138 66
Model
Max torque
Pole height mm
Ordering No.
Spanish
8092 1138 68
SM C10 - 2 Wall mount
10
753
8202 9001 00
Italian
8092 1138 70
SM C10 - 2 Wall mount
10
753
8202 9001 10
32
AT L A S C O P C O S C R E W D R I V E R S
Carbon fibre torque arm
TECHNICAL DATA / ACCESSORIES
Tensor SL Screwdrivers
Straight tool
Angle head tool
Torque range
Model
Nm
Pistol grip tool
Speed
r/min
in Ib
Weight
kg
Ib
Length
mm
CS distancea
mm
Ordering No.
Straight tool push-to-start and front lights
ETD SL21-01-I06-PS
0.3 - 1.2
ETD SL21-04-I06-PS
0.8 - 4
2.7 -
ETD SL21-07-I06-PS
1.5 - 7.5
13
-
66
970
0.7
1.6
246
18/19.5
8433 2107 69
ETD SL21-10-I06-PS
2.0 - 10
18
-
89
720
0.7
1.6
246
18/19.5
8433 2108 25
7
-
10
3000
0.7
1.6
246
18/19.5
8433 2102 92
35
1600
0.7
1.6
246
18/19.5
8433 2104 91
Angle head lever start
ETV SL21-04-I06
0.8 - 4
7
-
35
1600
0.75
1.7
264
9
8433 2004 47
ETV SL21-04-I06-QC
0.8 - 4
8
-
35
1600
0.75
1.7
264
9
8433 2004 73
ETV SL21-04-06
0.8 - 4
9
-
35
1600
0.75
1.7
264
9
8433 2004 91
ETV SL21-07-I06
1.5 - 7.5
13
-
66
970
0.75
1.7
264
9
8433 2007 66
ETV SL21-07-I06-QC
1.5 - 7.5
14
-
66
970
0.75
1.7
264
9
8433 2007 79
ETV SL21-07-06
1.5 - 7.5
15
-
66
970
0.75
1.7
264
9
8433 2007 94
ETV SL21-12-I06
2.5 - 12
22
- 106
610
0.8
1.8
267
11
8433 2008 34
ETV SL21-12-I06-QC
2.5 - 12
23
- 106
610
0.8
1.8
267
11
8433 2008 61
ETV SL21-12-06
2.5 - 12
24
- 106
610
0.8
1.8
267
11
8433 2008 77
0.3 - 1.2
2.7 -
Pistol grip push-to-start
ETP SL21-01-I06-PS
-
10
3000
0.85
1.9
246
20.5
8433 2201 16
1600
0.85
1.9
246
20.5
8433 2204 66
0.8 - 4
ETP SL21-07-PS
1.5 -7.5
13
-
66
970
0.85
1.9
246
20.5
8433 2207 53
ETP SL21-10-PS
2 - 10
18
-
89
720
0.85
1.9
246
20.5
8433 2208 28
a)
7
35
ETP SL21-04-PS
ETD = CS distance without / with handle.
All models have quick change chuck and 1/4” female hex drive for bits.
ETV = CS distance over angle head.
RBU – hardware key
Bronze
Gold
Stand alone functionality:
All the functionality of the silver
plus:
• 64 parameter sets
• Autoset
Power Focus 4002 drive
• Batch count
• Advanced line control (Cell Job)
• Synchronisation in a cell
Model
Ordering No.
Silver
PF 4002 G-HW
8433 3100 00
PF 4002 C-HW
8433 3100 05
All the functionality of the bronze
plus:
PF 4002 G-DN-HW
8433 3140 00
PF 4002 C-DN-HW
8433 3140 05
PF 4002 G-PB-HW
8433 3142 00
PF 4002 C-PB-HW
8433 3142 20
PF 4002 G-IB-HW
8433 3145 00
PF 4002 C-IB-HW
8433 3145 05
PF 4002 G-MB-HW
8433 3147 00
PF 4002 C-MB-HW
8433 3147 05
PF 4002 G-EIP-HW
8433 3149 00
Model
Ordering No.
PF 4002 C-EIP-HW
8433 3149 05
RBU-Bronze
8433 0010 10
PF 4002 G-PN-HW
8433 3148 00
RBU-Silver
8433 0015 20
PF 4002 C-PN-HW
8433 3148 05
RBU-Gold
8433 0020 20
• 250 parameter sets
• Integrated Ethernet
• Job functionality
• Multistage functionality
• Cell functionality
• SPC
• Fieldbus options
AT L A S C O P C O S C R E W D R I V E R S
33
Accessories – Tensor SL
SL Cable
SL Cable with 90°
connector
SL Spiral cable
Stacklight
Quality Integrated fastening accessories
Cables
Model
MaxiDisplay
Ordering No.
Model
Ordering No.
MaxiDisplay 19” including Operator Guidance Software 1 user License*
8435 3070 10
3m
4220 3319 03
Operator Guidance Software 1 user License*
8092 1185 01
5m
4220 3319 05
Stacklight ESL-04 standard
8433 0570 13
10 m
4220 3319 10
15 m
4220 3319 15
20 m
4220 3319 20
Tool Cable
Heavy duty cables
Accessory cables
Model
Ordering No.
3m
4220 3378 03
I/O bus cable 0.5 m
4222 0917 00
5m
4220 3378 05
I/O bus cable 1 m
4222 0917 01
10 m
4220 3378 10
I/O bus cable 3 m
4222 0917 03
15 m
4220 3378 15
I/O bus cable 5 m
4222 0917 05
20 m
4220 3378 20
I/O bus cable 10 m
4222 0917 10
I/O bus cable 15 m
4222 0917 15
I/O Termination plug
4222 0443 00
Cable with 90° connector
3m
4220 3607 03
5m
4220 3607 05
10 m
4220 3607 10
15 m
4220 3607 15
20 m
4220 3607 20
Software
ToolsTalk PF W10
Ordering No.
4220 3746 05
1-user license
8092 1190 01
5-user license
8092 1190 05
4220 3617 05
10-user license
8092 1190 10
Extension cable
Plant license
8092 1190 99
3m
4220 2795 03
ToolsNet 4000 Reports
Ordering No.
5m
4220 2795 05
05 Spindle License
8092 1410 05
10 m
4220 2795 10
10 Spindle License
8092 1410 10
25 Spindle License
8092 1410 25
Plant License
8092 1410 00
Spiral cable straight
5m
Spiral cable with 90° connector
5m
34
AT L A S C O P C O S C R E W D R I V E R S
ToolsNet 4000 Alert
Ordering No.
05 Spindle License
8092 1411 05
10 Spindle License
8092 1411 10
25 Spindle License
8092 1411 25
Plant License
8092 1411 00
ToolsNet 4000 History
Ordering No.
05 Spindle License
8092 1412 05
10 Spindle License
8092 1412 10
25 Spindle License
8092 1412 25
Plant License
8092 1412 00
TECHNICAL DATA / ACCESSORIES
MicroTorque
MicroTorqueTM controller
ETD M 80L
ETD M 27 ABL
Torque range
Model
Ncm In lb
ETD M 50 ABL
Speed
r/min
Length
mm
Overall
width
mm
ETF MT 100
Weight
kg lb
Bit
drive
Ordering No.
Fixtured transducerized
ETF MT 5
0.5 - 5
0.04 - 0.4
600
184
20
0.4
0.90
HM 4 mm
8432 0800 10
ETF MT 10
1 - 10
0.09 - 0.9
600
184
20
0.4
0.90
HM 4 mm
8432 0800 11
ETF MT 20
2 - 20
0.18 - 1.8
800
184
20
0.4
0.90
HM 4 mm
8432 0800 12
ETF MT 50
5 - 50
0.44 - 4.4
1000
255
30
0.76
1.67
HM 4 mm
8432 0800 13
ETF MT 80
8 - 80
0.71 - 7.1
1200
274
30
1.18
2.60
HM 4 mm
8432 0800 14
ETF MT 100
10 - 100
0.88 - 8.8
1000
274
30
1.18
2.60
1/4” HEX
8432 0800 15
ETF MT 200
20 - 200
1.77 - 17.7
800
274
30
1.18
2.60
1/4” HEX
8432 0800 16
ETF MT 500
50 - 500
4.42 - 44.2
500
260
40
1.84
4.05
1/4” HEX
8432 0800 17
Hand-held Digitork, without push-to-start
ETD M 03 A
0.5 - 2.5
0.04 - 0.2
1000
132
16
0.1
0.22
Ø 2 mm
8432 0810 05
ETD M 05 A
1.5 - 5
0.13 - 0.4
750
132
16
0.1
0.22
Ø 2 mm
8432 0810 06
ETD M 10 A
3 - 10
0.27 - 0.9
750
132
16
0.1
0.22
Ø 2 mm
8432 0810 08
ETD M 20 AVB
5 - 20
0.44 - 1.8
750
146
22
0.25
0.55
HM 4 mm
8432 0810 34
ETD M 20 ACBS
5 - 20
0.44 - 1.8
750
162
22
0.25
0.55
HM 4 mm
8432 0810 31
ETD M 25 AVB
7.5 - 25
0.66 - 2.2
750
174
22
0.25
0.55
HM 4 mm
8432 0810 09
ETD M 27 ABL
7.5 - 27
0.66 - 2.4
800
185.4
29
0.25
0.5
HM 4 mm
8432 0815 02
ETD M 40 ABL
10 - 40
0.71 - 3.6
850
225.4
36
0.52
1.1
HM 4 mm
8432 0815 05
ETD M 50 ABL
15 - 50
1.33 - 4.4
850
225.4
36
0.52
1.1
HM 4 mm
8432 0815 08
ETD M 80 ABL
16 - 80
1.42 - 7.1
850
225.4
36
0.52
1.1
HM 4 mm
8432 0815 11
ETD M 40 L
10 - 40
0.71 - 3.6
850
240
27
0.65
1.43
HM 4 mm
8432 0810 25
ETD M 50 L
15 - 50
1.33 - 4.4
850
220
27
0.65
1.43
HM 4 mm
8432 0810 10
ETD M 80 L
16 - 80
1.42 - 7.1
850
240
27
0.65
1.43
HM 4 mm
8432 0810 11
ETD M 100 L
25 - 100
2.21 - 8.8
700
240
27
0.65
1.43
1/4” HEX
8432 0810 12
Hand-held Ergo Digitork, push-to-start configurable
Hand-held Digitork, push-start configurable
ETD M 200 L
50 - 200
4.42 - 17.7
700
240
27
0.65
1.43
1/4” HEX
8432 0810 13
ETD M 250 L
75 - 250
6.62 - 23.5
600
240
27
0.65
1.43
1/4” HEX
8432 0810 24
ETF M 05
1.5 - 5
0.13 - 0.4
800
184
20
0.4
0.90
HM 4 mm
8432 0810 15
ETF M 10
3 - 10
0.27 - 0.9
500
184
20
0.4
0.90
HM 4 mm
8432 0810 16
ETF M 20
5 - 20
0.44 - 1.8
650
184
20
0.4
0.90
HM 4 mm
8432 0810 17
ETF M 50
15 - 50
1.33 - 4.4
850
230
30
0.8
1.76
HM 4 mm
8432 0810 18
ETF M 80
16 - 80
1.42 - 7.1
850
272
30
1.2
2.64
HM 4 mm
8432 0810 19
ETF M 100
25 - 100
2.21 - 8.8
700
272
30
1.2
2.64
1/4” HEX
8432 0810 20
Fixtured Digitork
ETF M 200
50 - 200
4.42 - 17.7
600
272
30
1.2
2.64
1/4” HEX
8432 0810 21
ETF M 400
150 - 400
13.27 - 35.4
320
260
40
1.8
3.96
1/4” HEX
8432 0810 22
ETF M 800
300 - 800
26.55 - 70.8
300
322
45
2.6
5.73
1/4” HEX
8432 0810 23
ETD M AXXX line: C - tool cable, V - integrated vacuum hose, B - reverse button, S - short lever, L - long lever.
NOTE: ”Complete system” (single ordering number) includes: Controller, screwdriver, tool cable, Tools Talk MT, USB communication cable and power supply.
Tool cable
Software
Model
Ordering No.
Model
Ordering No.
M - (AB)L tool - 2 m
8432 0830 37
Tools Talk MT Analysis (for graph analysis)
8432 0830 31
MT/M/M-AXXX Tool - 2 m
8432 0830 36
Tools Talk MT Analysis/Net (for graph analysis and data collection)
8432 0830 45
M - (AB)L tool - 3.5 m
8432 0831 02
MT/M/M-AXXX Tool - 3.5 m
8432 0831 01
AT L A S C O P C O S C R E W D R I V E R S
35
Accessories – MicroTorque
Controller accessories
Shaker tray
Model
Ordering No.
Model
Combi (Remote control + program selector)
8432 0830 88
SGQ Largea (110x110x35 mm)
Remote control
8432 0830 08
Digital program selector
8432 0830 34
Vacuum pump, VPX 3
Slot mm
Ordering No.
SGQ 15
1.5
8432 0830 09
SGQ 20
2
8432 0830 10
8432 0830 05
SGQ 25
2.5
8432 0830 11
Vacuum pump, VPX 6
8432 0830 06
SGQ 30
3
8432 0830 12
Controller fixture table
8432 0830 84
SGQ 35
3.5
8432 0830 13
Controller fixture wall
8432 0830 32
SGQ 40
4
8432 0830 14
Footswitch
8432 0830 07
SGQ 45
4.5
8432 0830 15
Desktop socket (with screwdriver presence sensor)
8432 0831 89
SGQ 50
5
8432 0830 16
MT Stacklight table stand
8432 0830 97
SGQ 55
5.5
8432 0830 17
MT Stacklight wall mount
8432 0830 99
SGQ 60
6
8432 0830 18
Y cable for I/O connector*
8432 0831 99
MSG Smallb (70x70x15 mm)
MSG 05
0.5
8432 0830 19
MSG 06
0.6
8432 0830 20
MSG 07
0.7
8432 0830 21
MSG 08
0.8
8432 0830 22
MSG 09
0.9
8432 0830 23
MSG 10
1.0
8432 0830 24
MSG 11
1.1
8432 0830 25
MSG 12
1.2
8432 0830 26
MSG 13
1.3
8432 0830 27
MSG 14
1.4
8432 0830 28
MSG 15
1.5
8432 0830 29
* cable suitable when two I/O accessories are required.
MT Stacklight for
wall mounting
a
MT Stacklight
table version
GHP Small
GHP Mini
SGQ type (big version): For screws up to 30 mm lenght.
From Ø 1.5 up to Ø 6 mm.
b
MSG type (small version): For screws up to 10 mm lenght.
From Ø 1.5 up to Ø 6 mm.
Remote control
Digital Program
Selector
Vacuum adapter
Torque arm
Blank nozzles
Vacuum pump
Shaker tray
Vacuum adapters and nozzles
Model
Ordering No.
GHP Mini
8432 0830 02
GHP Small
8432 0830 03
GHP Large
8432 0830 04
Torque arm handles
Model
Ordering No.
ETD 03-25 xVx ( 36-44 mm bit /nozzle Ø 6 mm)
8432 0770 02
ETD 20-25 ACBx (44 mm bit /nozzle Ø 6 mm)
8432 0770 08
ETD 20-25 ACBx (64 mm bit /nozzle Ø 6 mm)
8432 0770 10
ETD 40-80 L (44 mm bit / nozzle Ø 6 mm)
8432 0770 13
ETD 40-80 L (64 mm bit /nozzle Ø 6 mm)
8432 0770 15
Model
Ordering No.
ETD 40-80 L (44 mm bit /nozzle Ø 8 mm)
8432 0770 17
Handle between GHP Mini and ETF 05, 10, 20
8432 0830 90
ETD 40-80 L (64 mm bit /nozzle Ø 8 mm)
8432 0770 05
Handle between GHP Small and ETF 50, 100, 200
8432 0830 53
ETD 100-250 L (50 mm bit /nozzle Ø 6 mm)
8432 0770 20
Handle between GHP Large and ETF 400, 500, 800
8432 0830 54
ETD 100-250 L (70 mm bit /nozzle Ø 6 mm)
8432 0770 23
ETD 100-250 L (50 mm bit /nozzle Ø 8 mm)
8432 0770 27
ETD 100-250 L (70 mm bit /nozzle Ø 8 mm)
8432 0770 30
ETD 100-250 L (90 mm bit /nozzle Ø 8 mm)
8432 0770 25
ETF 5-80 (44 mm bit /nozzle Ø 6 mm)
8432 0770 33
ETF 5-80 (64 mm bit /nozzle Ø 6 mm)
8432 0770 35
ETF 5-80 (44 mm bit /nozzle Ø 8 mm)
8432 0770 38
ETF 5-80 (64 mm bit /nozzle Ø 8 mm)
8432 0770 40
ETF 100-200 (70 mm bit /nozzle Ø 8 mm)
8432 0770 43
ETF 400-800 (70 mm bit /nozzle Ø 10 mm)
8432 0770 45
Blank nozzle Ø 6 mm
8432 0760 02
Blank nozzle Ø 8 mm
8432 0760 00
Blank nozzle Ø 10 mm
8432 0760 06
Torque arm adapters
Model
Ordering No.
Adapter between GHP Mini and ETF 5-20
8432 0830 70
Adapter between GHP Mini and ETD M 3-10
8432 0831 81
Adapter between GHP Mini and ETD M 20-25 AVB
8432 0830 83
Adapter between GHP Small and ETF 50-200
8432 0830 72
Adapter between GHP Small and ETD M-L
8432 0830 73
Adapter between GHP Large and ETF 400-800
8432 0830 74
Universal adapter for GHP Small (LUM, EBL, DL, SL)
8432 0831 80
NOTE: The adapters and the handles are not included with the torque arm package, need
to be ordered separately.
36
AT L A S C O P C O S C R E W D R I V E R S
TECHNICAL DATA / ACCESSORIES
MicroTorque Transducer
Capacity
Ncm
In Ib
Overall length
mm
Drive
Ordering No.
MT TH 1
1.0
0.09
115
Ø 3 mm
8432 0820 10
MT TH 2
2.0
0.18
115
Ø 3 mm
8432 0820 11
MT TH 5
5.0
0.44
115
Ø 3 mm
8432 0820 12
MT TH 10
10.0
0.88
115
Ø 3 mm
8432 0820 13
MT TH 20
20.0
1.77
115
1/4"
8432 0820 14
MT TH 50
50.0
4.42
124
1/4"
8432 0820 15
MT TH 100
100.0
8.85
124
1/4"
8432 0820 16
MT TH 200
200.0
17.70
124
1/4"
8432 0820 17
MT TS 1
1.0
0.09
81
Ø 3 mm
8432 0820 18
MT TS 2
2.0
0.18
81
Ø 3 mm
8432 0820 19
MT TS 5
5.0
0.44
81
Ø 3 mm
8432 0820 20
MT TS 10
10.0
0.88
81
Ø 3 mm
8432 0820 21
MT TS 20
20.0
1.77
81
Ø 3 mm
8432 0820 22
MT TS 50
50.0
4.42
98
1/4"
8432 0820 23
MT TS 100
100.0
8.85
98
1/4"
8432 0820 24
MT TS 200
200.0
17.70
98
1/4"
8432 0820 25
MT TS 500
500.0
44.25
111
1/4"
8432 0820 52
MT TR 2
2.0
0.18
76
Ø 3 mm
8432 0820 29
MT TR 5
5.0
0.44
76
Ø 3 mm
8432 0820 30
MT TR 10
10.0
0.88
76
Ø 5 mm
8432 0820 31
MT TR 20
20.0
1.77
76
Ø 5 mm
8432 0820 32
MT TR 50
50.0
4.42
105
1/4”
8432 0820 33
MT TR 100
100.0
8.85
105
1/4”
8432 0820 34
MT TR 200
200.0
17.70
105
1/4"
8432 0820 35
MT TR 500
500.0
44.25
105
1/4"
8432 0820 36
MT TRA 2
2.0
0.18
76
Ø 3 mm
8432 0820 41
MT TRA 5
5.0
0.44
76
Ø 3 mm
8432 0820 42
MT TRA 10
10.0
0.88
76
Ø 5 mm
8432 0820 43
MT TRA 20
20.0
1.77
76
Ø 5 mm
8432 0820 44
MT TRA 50
50.0
4.42
105
1/4”
8432 0820 45
MT TRA 100
100.0
8.85
105
1/4”
8432 0820 46
MT TRA 200
200.0
17.70
105
1/4"
8432 0820 47
MT TRA 500
500.0
44.25
105
1/4"
8432 0820 48
Model
Manual screwdriver torque transducer
Static reaction torque transducer
In-line rotary torque transducer
In-line rotary torque and angle transducer
Fastener
Torque analyzer
Joint kit
Model
Ordering No.
ACTA MT 4 (programable over keypad)
8432 0820 04
ToolsTalk MT Analysis (trace analysis)
8432 0830 31
Transducer cable
8432 0830 35
RS232 cable ACTA MT
8432 0831 39
ACTA MT 4
Fasteners for joint kits
Stationary transducer.
Accessories, stationary torque transducers
Bit Drive
Ordering No.
Joint Kit
Ordering No.
DIN7985 PH0 M1.6x4 V2A
PH0
4023 0005 01
M1.6 for MT TS - 3H7 adapter (up to 20 Ncm)
8432 0830 79
ISO14583 TX6 M2.0x10 V2A
TX6
4023 0005 02
M2 for MT TS - 1/4" adapter (up to 50 Ncm)
8432 0830 78
ISO14583 TX8 M2.5x10 V2A
TX8
4023 0005 03
M2.5 for MT TS - 1/4" adapter (up to 100 Ncm)
8432 0830 77
ISO14583 TX10 M3.0x10 V2A
TX10
4023 0005 04
M3.0 for MT TS - 1/4" adapter (up to 200 Ncm)
8432 0830 87
ISO14583 TX20 M4.0x12 V2A
TX20
4023 0005 05
M4.0 for MT TS - 1/4" adapter (up to 300 Ncm)
8432 0830 86
ISO14583 TX25 M5.0x12 V2A
TX25
4023 0005 06
M5.0 for MT TS - 1/4" adapter (up to 600 Ncm)
8432 0830 85
ISO14583 TX30 M6.0x12 V2A
TX30
4023 0005 07
M6.0 for MT TS - 1/4" adapter (up to 800 Ncm)
8432 0832 67
Lens head screw
AT L A S C O P C O S C R E W D R I V E R S
37
Atlas Copco Screwdriver Bits – Hexagon Drive
Torx bits
Drive system: 1/4’’ Hexagon, Style C 6.3
Screw profile:
Application: For Torx screws
Drive: 1/4’’ Hexagon, Style C 6.3
Slotted bits
Length
mm
Ordering No.
TX6
25
4023 0001 60
TX8
25
4023 1329 00
TX9
25
4023 1330 00
TX10
25
4023 1321 00
TX15
25
4023 1331 00
TX20
25
4023 1322 00
TX25
25
4023 1332 00
Phillips bits
TX27
25
4023 1333 00
Application: For Phillips screws
Drive: 1/4’’ Hexagon, Style C 6.3
TX30
25
4023 1323 00
TX40
25
4023 1334 00
Application: For slotted screws
Drive: 1/4’’ Hexagon, Style C 6.3
Blade
thickness (mm)
Point
Blade width
mm
Length
mm
Ordering No.
0.7
3.4
25
4023 1400 21
0.8
3.9
25
4023 1400 22
1
5.5
25
4023 1400 26
Length
mm
Ordering No.
PH0
25
4023 1326 00
PH1
25
4023 0696 01
PH2
25
4023 0697 01
PH3
25
4023 0698 01
Point
Hex bits
Application: For Hex-socket screws
Drive: 1/4’’ Hexagon, Style C 6.3
Ordering No.
2
25
4023 1318 00
2.5
25
4023 1319 00
3
25
4023 0819 00
4
25
4023 1320 00
5
25
4023 0820 00
6
25
4023 0821 00
7
25
4023 1430 00
8
25
4023 0905 00
Length
mm
Ordering No.
PZ1
25
4023 1101 11
PZ2
25
4023 1101 12
PZ3
25
4023 1101 13
TorxPlus bits
Application: For TorxPlus screws
Drive: 1/4’’ Hexagon, Style C 6.3
Length
mm
Ordering No.
IP6
25
4023 0001 70
IP8
25
4023 0001 74
IP10
25
4023 0001 78
38
AT L A S C O P C O S C R E W D R I V E R S
Length
mm
Ordering No.
5
25
4023 1215 00
6
25
4023 1216 00
7
25
4023 1219 00
8
25
4023 1217 00
10
25
4023 1218 00
Drive system: 3 mm Hexagon
Screw profile:
Application: For slotted screws
Drive: 3 mm Hexagon
Application: For Pozidriv screws
Drive: 1/4’’ Hexagon, Style C 6.3
Point
Application: For Hex-socket screws
Drive: 5/16’’ Hexagon, Style C 8
Slotted bits
Pozidriv bits
Point
Hex bits
Point
Length
mm
Point
Drive system: 5/16’’ Hexagon, Style C 8
Screw profile:
Blade
thickness (mm)
Blade width
mm
Length
mm
Ordering No.
1.8
50
4023 0004 03
0.4
2
50
4023 0004 04
0.4
2.5
50
4023 0004 05
0.5
3
50
4023 0004 06
0.5
4
50
4023 0004 07
0.5
3.5
50
4023 0004 08
0.5
4.5
50
4023 0004 09
0.8
4
50
4023 0004 10
0.8
5.5
50
4023 0004 11
0.3
SCREWDRIVER BITS
Phillips bits
Phillips bits
Application: For Phillips screws
Drive: 3 mm Hexagon
Application: For Phillips screws
Drive: 1/4’’ Hexagon, Style E 6.3
Length
mm
Ordering No.
Point
Length
mm
Ordering No.
00
50
4023 0004 00
PH00
50
4023 0001 51
0
50
4023 0004 01
PH00
70
4023 0001 52
1
50
4023 0004 02
PH00
90
4023 0001 53
PH0
50
4023 1325 00
PH1
50
4023 2320 21
PH1
70
4023 2327 21
PH1
89
4023 2335 21
PH1
152
5023 2360 21
PH2
50
4023 2320 22
PH2
70
4023 2327 22
PH2
89
4023 2335 22
PH2
152
4023 2360 22
PH3
50
4023 2320 23
PH3
70
4023 2327 23
PH3
89
4023 2335 23
PH3
152
4023 2360 23
Point
Torx bits
Application: For Torx screws
Drive: 3 mm Hexagon
Length
mm
Ordering No.
T6
50
4023 0004 14
T7
50
4023 0004 15
T8
50
4023 0004 16
T10
50
4023 0004 17
Point
Pozidriv bits
Application: For Pozidriv screws
Drive: 3 mm Hexagon
Torx bits
Length
mm
Ordering No.
PZ0
50
4023 0004 12
PZ1
50
4023 0004 13
Point
Application: For Torx screws
Drive: 1/4’’ Hexagon, Style E 6.3
Length
mm
Ordering No.
TX5
50
4023 0002 16
TX5
70
4023 0002 17
TX6
50
4023 0001 61
Slotted bits
TX6
70
4023 0001 62
Application: For slotted screws
Drive: 1/4’’ Hexagon, Style E 6.3
TX6
90
4023 0001 63
TX7
50
4023 0002 18
TX7
70
4023 0002 19
TX8
50
4023 2220 21
TX8
89
4023 2235 21
TX9
50
4023 2220 22
TX9
89
4023 2235 22
TX10
50
4023 2220 23
TX10
89
4023 2235 23
TX15
50
4023 2220 24
TX15
89
4023 2235 24
TX20
50
4023 2220 25
TX20
89
4023 2235 25
TX25
50
4023 2220 26
TX25
89
4023 2235 26
TX27
50
4023 2220 27
TX27
89
4023 2235 27
TX30
50
4023 2220 28
TX30
89
4023 2235 28
TX40
89
4023 2235 29
Point
Drive system: 1/4’’ Hexagon, Style E 6.3
Screw profile:
Blade
thickness (mm)
Blade width
(mm)
Length
mm
Ordering No.
3.2
0.7
49
4023 2020 21
3.9
0.8
49
4023 2020 23
4.7
0.9
49
4023 2020 24
6.3
1
49
4023 2020 26
7
1.1
49
4023 2020 27
7.9
1.2
49
4023 2020 28
9.1
1.3
49
4023 2020 29
3.2
0.7
76
4023 2030 21
3.9
0.8
76
4023 2030 23
4.7
0.9
76
4023 2030 24
D
Slotted bits with finder
t
Application: For slotted screws
Drive: 1/4’’ Hexagon, Style E 6.3
Outside dia
(D) mm
9.5
d
Blade thickness
(t) mm
Blade width
(d) mm
Length
mm
Ordering No.
0.9
4.9
95
4023 0683 00
11.1
1
6.1
93
4023 1313 00
12.7
1.1
7.4
93
4023 0684 00
14.3
1.2
8.9
96
4023 0949 00
15.9
1.3
10
95
4023 0685 00
AT L A S C O P C O S C R E W D R I V E R S
39
Hex bits
Drive system: 7/16’’ Hexagon, Style E 11.2
Screwprofile
Application: For Hex-socket screws
Drive: 1/4’’ Hexagon, Style E 6.3
Hex bits
Length
mm
Ordering No.
2
49
4023 1311 00
2.5
49
4023 1312 00
3
49
4023 0710 00
4
49
4023 0711 00
Point
5
49
4023 0712 00
6
49
6.35
49
8
10
Point
Application: For Hex-socket screws
Drive: 7/16’’ Hexagon, Style E 11.2
Length
mm
Ordering No.
5
70
4023 0800 00
4023 0906 00
6
70
4023 0801 00
4023 0942 00
8
70
4023 0802 00
49
4023 1369 00
10
70
4023 0760 00
49
4023 1370 00
Drive system: 1/4’’ Hexagon, Style E 6.3
Application: Suitable for bits with 1/4”
Hexagon Drive
TorxPlus bits
Application: For TorxPlus screws
Drive: 1/4’’ Hexagon, Style E 6.3
Hs
L1
L
D1
Length
mm
Ordering No.
IP5
50
4023 0002 20
IP5
70
4023 0002 21
IP6
50
4023 0001 71
IP6
70
4023 0001 72
Hex
drive
IP6
90
4023 0001 73
IP7
50
4023 0002 23
IP7
70
4023 0002 24
IP7
90
4023 0002 25
IP8
50
4023 0001 75
IP8
70
4023 0001 76
IP8
90
4023 0001 77
IP10
50
4023 0001 79
IP10
70
4023 0001 80
IP10
90
4023 0001 81
Point
D
Bit holders
Standard type
Hex
female
Diameter
(D) mm
Diameter
(D1) mm
Length
L mm
Length
L1 mm
Magnetic
Ordering No.
1/4"
1/4"
9.5
7.9
47.8
53.8
Yes
4023 1208 00
1/4"
1/4"
9.5
7.9
47.8
104.8
Yes
4023 1209 00
Hs
L1
L
Hf
D
Quick release type
Hex
drive
Hex
female
Diameter
(D) mm
Length
L mm
Length
L1 mm
Magnetic
Ordering No.
1/4"
1/4"
9.4
35.7
25.4
Yes
4023 1353 00
1/4"
1/4"
9.4
50
25.4
Yes
4023 0707 00
Pozidriv bits
Drive system: 1/4’’ Hexagon, Style E 6.3
Application: For bits with Wing-Shank
4 mm drive
Application: For Pozidriv screws
Drive: 1/4’’ Hexagon, Style E 6.3
Length
mm
Ordering No.
PZ0
50
4023 0001 41
PZ0
70
4023 0001 42
PZ1
50
4023 2420 21
PZ1
70
4023 2427 21
PZ1
89
4023 2435 21
PZ2
50
4023 2420 22
PZ2
70
4023 2427 22
PZ2
70
4023 2435 22
PZ3
50
4023 2420 23
PZ3
89
4023 2435 23
Point
40
AT L A S C O P C O S C R E W D R I V E R S
Hf
Adapters
Ordering No.
Adapter
4220 0105 00
SCREWDRIVER BITS
Atlas Copco Screwdriver Bits – Wing-shank Drive
Hex bits
Drive system: 4 mm Wing-shank
Screw profile:
Application: For Hex screws
Drive: Wing-shank 4 mm
Torx bits
Application: For Torx screws
Drive: Wing-shank 4 mm
Length
mm
Ordering No.
TX1
40
4023 0002 52
TX2
60
4023 0002 53
TX3
60
4023 0002 54
TX4
60
4023 0001 90
TX5
60
4023 0001 91
TX6
60
4023 0001 92
TX8
60
4023 0001 93
TX10
60
4023 0001 94
Point
Length
mm
Ordering No.
1.5
60
4023 0002 60
2
60
4023 0002 61
2.5
60
4023 0002 62
3
60
4023 0002 63
Point
Slotted bits
Application: For Slotted screws
Drive: Wing-shank 4 mm
Blade width
mm
Length
mm
Ordering No.
TorxPlus bits
0.28
1.3
60
4023 1327 01
Application: For TorxPlus screws
Drive: Wing-shank 4 mm
0.30
1.7
60
4023 1327 02
0.3
2.0
60
4023 1327 03
0.3
2.5
60
4023 1327 04
Point
Length
mm
Ordering No.
IP4
60
4023 0002 10
IP5
60
4023 0002 11
IP6
60
4023 0002 12
IP8
60
4023 0002 13
IP10
60
4023 0002 14
Point
Pozidriv bits
Application: For Pozidriv screws
Drive: Wing-shank 4 mm
Length
mm
Ordering No.
PZ0
60
4023 0002 03
PZ1
60
4023 0002 04
PZ2
60
4023 0002 55
Point
Phillips bits
Application: For Phillips screws
Drive: Wing-shank 4 mm
Point
Length
mm
Ordering No.
PH00
40
4023 0002 56
PH0
40
4023 0002 57
PH0
60
4023 0002 03
PH1
40
4023 0002 58
PH2
40
4023 0002 59
AT L A S C O P C O S C R E W D R I V E R S
41
SCREWDRIVER BITS
Atlas Copco Screwdriver Bits – Halfmoon Drive
Drive system: 4 mm Halfmoon
Screw profile: Torx bits
Application: For Torx screws
Drive: Halfmoon 4 mm
Pozidriv bits
Application: For Pozidriv screws
Drive: Halfmoon 4 mm
Length
mm
Ordering No.
TX1
44
4023 0002 32
TX2
44
4023 0001 06
Point
Length
mm
Ordering No.
TX3
44
4023 0001 08
PZ0
44
4023 0002 26
TX3
64
4023 0001 09
PZ0
64
4023 0002 27
TX4
44
4023 0001 20
PZ1
44
4023 0002 28
TX4
64
4023 0001 21
PZ1
64
4023 0002 29
TX5
44
4023 0001 22
TX5
64
4023 0001 23
TX6
44
4023 0001 24
TX6
64
4023 0001 25
TX8
44
4023 0001 26
TX8
64
4023 0001 27
TX10
44
4023 0001 28
TX10
64
4023 0001 29
Point
Phillips bits
Application: For Phillips screws
Drive: Halfmoon 4 mm
Point
Length
mm
Ordering No.
PH000
44
4023 0001 10
PH000
64
4023 0001 11
TorxPlus bits
PH00
44
4023 0001 12
PH00
64
4023 0001 13
PH0
44
4023 0001 14
Application: For TorxPlus screws
Drive: Halfmoon 4 mm
PH0
64
4023 0001 15
PH1
44
4023 0001 16
PH1
64
4023 0001 17
PH1
90
4023 0001 18
PH2
44
4023 0002 30
PH2
64
4023 0002 31
Hex-socket bits
Nutsetter. Application: For nuts and thread-headed
screws
Drive: Halfmoon 4 mm
Length
mm
Ordering No.
2.3
44
4023 0002 45
2.5
44
4023 0002 46
3
44
4023 0002 47
4
44
4023 0002 48
4.5
44
4023 0002 49
5
44
4023 0002 50
5.5
44
4023 0002 51
Point
Length
mm
Ordering No.
IP2
44
4023 0002 35
IP3
44
4023 0002 36
IP4
44
4023 0001 30
IP4
64
4023 0001 31
IP5
44
4023 0001 32
IP5
64
4023 0001 33
IP6
44
4023 0001 34
IP6
64
4023 0001 35
IP8
44
4023 0001 36
IP8
64
4023 0001 37
IP10
44
4023 0001 38
IP10
64
4023 0001 39
Point
Hex bits
Application: For Hex-socket screws
Drive: Halfmoon 4 mm
Length
mm
Ordering No.
1.5
44
4023 0002 41
Point
2
44
4023 0002 42
Slotted bits
2.5
44
4023 0002 43
Application: For slotted screws
Drive: Halfmoon 4 mm
3
44
4023 0002 44
Blade width
(mm)
Adapters
Blade thickness
mm
Length
mm
Ordering No.
2
0.3
44
4023 0002 37
2.5
0.3
44
4023 0002 38
3
0.4
44
4023 0002 39
Model
Ordering No.
4
0.5
44
4023 0002 40
Non magnetic
4023 0002 15
42
AT L A S C O P C O S C R E W D R I V E R S
Drive system: 4 mm Halfmoon
Application: Suitable for bits with 1/4’’ Hexagon drive
Vibration and noise emission values
The declared values given in this table were obtained
by laboratory type testing in accordance with the stated
standards and are suitable for comparison with the
­declared values of other tools tested in accordance with
the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual workplaces may be higher. The actual exposure values and risk of harm experienced by an individual
user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
as upon the exposure time and the physical condition of
the user.
We, Atlas Copco Tools AB, cannot be held liable for the
consequences of using the declared values, instead of
values reflecting the actual exposure, in an individual risk
assessment in a workplace situation over which we have
no control.
Power Tools may cause hand-arm vibration syndrome
if their use is not adequately managed. An EU guide to
­managing hand-arm vibration can be found at
http://www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a program of health surveillance to
­detect early symptoms which may relate to noise or
­vibration ­exposure, so that management procedures can
be ­modified to help prevent future impairment.
All values are current as of the date of this publication.
For the latest information please visit
www.atlascopco.com/tools/ergonomics
Vibration
total value
Vibration
value
(3-axes value) (1-axis value)
according to according to
ISO 28927-2
ISO 8662-1
Valid from Valid until
2010
2009
Sound
pressure levels
and sound
power levels a
according to
ISO 15744
Value UncerSound Sound
Value 1-axis
3-axes tainty
pressure power
m/s2
dB(A)
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
72
74
<70
78
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
71
<70
75
75
78
<2.5
<2.5
75
<2.5
<2.5
<70
<2.5
—
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
—
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<70
<70
<70
<70
<70
<70
<70
<70
<70
m/s2
Model
Pneumatic screwdrivers
Pistol grip
Shut-off
LUM10
LUM12 HRX
LUM12 HRF
LUM22
Straight
Shut-off
LUM02
LUM10
LUM12
LUM22PR
LUM22SR
Angle
Shut-off
LTV009
Battery screwdrivers
BCP
Electric screwdrivers
EBL
ETF M/MT
ETD M
ETD DL
ETV DL
ETP DL
ETD SL
ETV SL
ETP SL
m/s2
a
The uncertainty in the sound levels is 3 dB(A).
b
Vibrations are not given for tools intended for fixtured
­applications.
dB(A)
AT L A S C O P C O S C R E W D R I V E R S
43
www.atlascopco.com
9833 1778 01
Recyclable paper. Jetlag 2010:1