2014 Catalog PDF

performance hunting...
roxstar...
Split Point Limb Capture System,
with True Position Technology...
A rich, durable film dipped riser with accenting anodized
components, capped off with Realtree APG limbs make the
Roxstar a beauty to behold. The power supply for the Roxstar
is Alpine’s V3g Cam, designed to produce the best overall
performance for hunting. The cam design provides high
velocities, smooth draw force profile, and a full 80% letoff.
Become a Roxstar and emerge on your stage of performance
with confidence, knowing that you are shooting the most radical,
blood spilling, hunting machine available.
Exclusive Alpine Offset Quiver
Mount, shifts the quiver
inside the riser for improved
centerline bow balance...
The Roxstar is available in
full camo with a film dipped
riser and limbs, or a black
anodized riser with camo
dipped limbs.
Precision Modular Strut System...
V3g Matched Performance
Hybrid Cam System, with
Dynamic Load Balancing...
Pulse Isolator String Stop with linear
and radial adjustment...
Licensed under Patent
#6,990,970B-1
As the cam is drawn, the force applied to the
limbs changes from one side to the other,
which normally induces cam lean. Alpine’s
exclusive “Dynamic Load Balancing System”
with helical grooves machined into the
Velocitec 3G Cam System, move the balance
point of the limb laterally in a continuous
motion as the cam is drawn, thereby following
the load change and keeping the cam straight,
throughout the entire draw cycle.
verdict...
fireball...
The final judgement has been
passed..
The 2014 Alpine F1 Fireball is the performance bow of your dreams…
Built from a rock solid forged riser with power tuff composite limbs. The
F1 Fireball is all the bow you will ever need to tag the trophy of a lifetime
or bang away at the range.
The power plant of this machine is the 3g Velocitec Cam. The Velocitec
Cam System has been in the Alpine line for years and is tried and true in
situations from the bitter northern Canadian cold to the sweltering African
summer heat.
The F1 Fireball is sure to exceed your expectations with its blazing
speed, smooth draw cycle, and bone crushing kinetic energy.
The best part about the F1 Fireball is the fact that it doesn’t hurt the
pocketbook and costs about half of most other performance bows on the
market.
The Verdict features a reflexed forged riser with our new “Limb Vice
Pocket System”. This system clamps the limb and pocket assembly
against the riser just like a vice to totally eliminate noise, vibration, and
recoil.
The new “Fast Lane Cable Guard System” is sleek, smooth, and trouble
free. It drastically reduces recoil and noise to give this new performer an
unbelievable feel when shooting.
An “Integrated Offset Quiver Mount” is a standard feature on this bow
that will allow almost any quiver to be mounted back and out of the
way. This exclusive Alpine mount moves the quiver closer to the true
centerline of the bow to aid in overall balance.
Our “Pulse Isolator String Stop” is now fully adjustable and allows for
fine tuning of centerline, as well as fore and aft movement.
Alpine has also added a 416 stainless steel stabilizer insert to the
Verdict for positive and long lasting thread engagement for the stabilizer.
Available in Black or MO Infinity
Camo
Larry Windnagle, Enterprise Accounts Area Sales Manager
NW District for UPS, with a nice Montana bull taken with his
Fireball.
Rocky Jacobsen, founder of Rocky
Mountain Hunting Calls, relies on
Alpine bows to harvest his game
thougthout the year.
New, redesigned limb
pocket system for 2014
will provide years of
solid, reliable, and
trouble free shooting.
frenzy...
bowfishing...
mako...
The re-introduction of the Alpine Frenzy for 2014 was inevitable…
The Alpine Frenzy is back. The perfect bow for a beginning archer
or a budget minded bowhunter is here and features 7 inches
of adjustable draw length from the Radial Force System and
poundage up to 60 pounds. The Alpine Frenzy meets the needs for
beginner hunters or even a more advanced archer looking to lighten
things up.
The light weight design and full draw length adjustability, without the
use of a bow press, make the Alpine Frenzy the best choice for the
person not wanting to break the bank.
The 2014 Alpine Mako is built with a CNC machined riser and a
redesigned limb pocket system that is capped off with machined
aluminum Radial Force Cams. There are no plastic components on this
bad boy! The Radial Force Cam System features 7 inches of rotating
draw length adjustment to fit almost any age of bowfisherman. The
draw length can be adjusted without a bow press and can be done in
the boat in seconds. The total mass weight of the Mako is right at 3
pounds so it will keep your complete set-up light weight for a full day of
arrow flinging.
Long time Alpine Staff Shooter, Ryan Greene, with a nice
Idaho bull.
Steve Stajkowski, Owner of SJX Jet Boats Inc., with a string of Snake River
carp taken with his Alpine Mako.
Be on top of the food chain when you enter the water with an Alpine
Mako.
RUCKuS...
age 10-adult...
The Alpine Ruckus is built for serious shooting. All machined
components and a high performance Radial Force Cam get
the teen or lady up and running with a great bow for hunting or
target shooting.
The hunting version is finished in Mossy Oak’s Break-Up
Infinity Camo pattern, and the lady version is finished in
stunning Pink Camo. Both bows are inlaid with a pewter
finished medallion. Step up from your beginner bow into a great
shooting performer from Alpine.
The Ruckus and Rookie are built using a machined aluminum
G Series riser and pocket. The RF cams on this little bow are
also machined from billet aircraft aluminum. No plastic on
these babies. It’s top of the line all the way!
ROOKIE Youth...
The Alpine Rookie is just what you need when starting out your aspiring young
archery enthusiast. This little bow is built to handle the abuse of a kid and still
perform flawlessly when your youngster hits the range. The Alpine Rookie has
been designed to maximize its usage as your child grows, with a draw range
of 19 to 25 inches and draw weight range from appx. 10 to 35 pounds.
Alpine believes that champions are built from a young age, and the Alpine
Rookie is a key part to bringing your kiddo to a level above the rest.
Available with a Black riser and the option of Pink or
conventional Camo on the limbs.
No shortcuts on the Ruckus and Rookie bows...
Alpine Youth Bow Case...
The small Alpine soft bow case is specifically designed for the
Alpine youth and bowfishing bows with a budget in mind.
Also available with
a Pink Camo riser &
black limbs for the gals.
Ashley Sande with her first bow kill in
Washington state.
power loc
Ultralite quiver...
Designed for Vertical Bows
and Crossbows...
Designed for Vertical Bows and Crossbows
The new Power Loc™ 4 Arrow Quiver sports the best features of the legendary
Soft Loc Quiver with the addition of some great new designs and improvements.
Alpine continues to use a variation of the very effective rubber mount that isolates
noise and vibration between the quiver guide rails and your bow.
In fact, when the quiver is removed from the mount, all of the latching system
comes off from the bow and stays with the quiver so there is no chance of
unwanted noise and vibration from the quiver mount while the quiver is off the bow.
The new Power Loc™ has an innovative roll and lock latch to prevent accidental
dis-mounting of the quiver while in heavy brush, dirt bike riding, or on horse back.
As the latch is rolled into position it applies pressure to the rubber guide rail
module as the stainless steel latch pin locks into an indent in the 6061 aluminum
mounting base. Safe, secure, and vibration free. Made in the USA
Power Loc Quivers are
available in these popular
camo patterns..
• Mossy Oak Infinity
• Realtree Xtra
• Realtree APG HD
• Mathews Lost Camo
• Mathews Lost AT
• Black
The latch is shown
in red for illustrative
purposes only.
The Power Loc™ is shown above without the mounting base as it would be when
removed from your bow. The aluminum mounting base is all that will remain on the
bow so with no moving parts, there will be no noise or vibration created from the
quiver mount.
1. Load the rail gripper
assembly into the mounting
base pressing the latch side in
last.
The rugged Power Loc™ mounting base is
extruded and machined from 6061 aluminum. It
features 2 hoizontal mounting positions and 1
set of holes for rotaing the quiver 15 degrees for
additional clearance options when installing.
The Power Loc™ hood features a full urethane
foam liner to protect both mechanical and
standard broadheads. With the liner being
the full depth of the ABS hood there is no
chance of making noise when removing
your arrow.
The new Power Loc™ arrow
gripper has been designed as a
two stage gripper that will grip
even the smallest arrow shafts.
2. The latch is now in the
preloaded position. Simply rotate
the lever down until it clicks into
the indent on the aluminum base
as shown below.
SOFT LOC QUIVERS...
Since the introduction of the Soft Loc Quiver System back in
2001, it has only gained in popularity. The Soft Loc quickly
became known as the quietest, mid-priced quiver available.
When mounted on a bow, this quiver actually reduces felt
vibrations, therefore acting as a great and very practical
vibration dampener. The many awards for quality and
innovation have posted this system to be quoted as “The best
quiver system on the market”!
The beauty of the “system” is the extreme versatility of the
quiver itself due to the unique rubber mount and dual guide
rails. Attach or detach the quiver quickly and quietly. Vertical
adjustment, vibration dampening, hip holsters, and compact
mounts are all features that a great quiver must have. All are
present in the Soft Loc family.
If you are looking for a quiver that is unequalled in quality,
innovation, dampening, and price, look no further than Alpine
Archery.
Pro Balance G1 Quiver Mounting System..
The Pro Balance G1 Quiver Mount is designed to accept almost any 1 piece
quiver. Using this mount allows you to balance your bow with a quiver you
already own. Adjustments include fore and aft movement, in 3 hole positions
on the mounting bracket and infinite windage adjustment with the guide rail
clamp.
Soft Loc Screw-in Tree Mount...
Secure your Soft Loc Quiver to any tree with a flip of the wrist and a simple
twist. This unique Quiver Clip is a great way, pioneered by Alpine Archery, to
securely attach your Soft Loc Quiver to the tree.
The screw-in version of the quiver mount has a very sharp lag screw that tucks
neatly into the body of the mount for transportation and storage. This compact
feature allows you to pack the quiver mount in your pocket or any pouch of your
hunting pack without injury or damage.
Soft Loc Quivers are
available in these
popular camo patterns..
• Mossy Oak Infinity
• Realtree Xtra
• Realtree APG HD
• Mathews Lost Camo
• Mathews Lost AT
• Black (5 arrow only)
• Skulz Camo (5 arrow only)
Soft Loc Quivers are available in
3, 5, and 7 arrow versions...
The Tension Pin Set is for securing smaller diameter
arrows. Each pin is molded in an oval shape and
designed to increase arrow tension on the Alpine
Soft Loc and Bear Claw arrow grippers. Simply slip
a pin into the outbound hole in the lower gripper.
Twist slightly, to increase or decrease tension. 7 pins
included.
Soft Loc Hip Quiver System...
Alpine’s Quick Draw Hip Quiver System features a rugged full grain leather holster with a rotating mount and a
quick detach rail gripper. This is a very unique hip quiver designed with the flexibility to adapt to brushy or open
conditions in seconds. Simply purchase the Soft Loc of your choice (3, 5, or 7 arrow) and mount it to your bow.
Then once you purchase the hip quiver, you are set and ready to go with a mount on your bow and on your hip.
This allows you to switch back and forth from the bow to your hip in seconds.
BEAR CLAW QUIVERS...
Bear Claw Compact Screw-in Mount...
Secure your Bear Claw Quiver to any tree with a flip of the wrist and
a simple twist. This Quiver Clip is a unique way, pioneered by Alpine
Archery, to securely attach your Bear Claw Quiver to the tree.
This screw-in mount has a very sharp lag screw that tucks neatly into
its body for transportation and storage.
Cousin to the Soft Loc… The Alpine Bear Claw
Quiver is a great, cost effective way to carry your
arrows. The Bear Claw 3 and 5 arrow versions are
designed to have more refined features than any
other price point quiver available.
The Bear Claw Quiver is a universal quiver system
designed with the treestand hunter in mind. With the
Bear Claw you have a lightweight, inexpensive quiver
that easily detaches and will accept any common
arrow size. The Bear Claw has a wide range of
vertical adjustment, so you can move the quiver to
avoid rest or sight conflicts and keep your nocks out
of the mud. Conventional broadheads are no problem
and the convenient pre-cut holes in the quiver foam
allow you to use mechanical broadheads without
the extra weight and expense of an additional arrow
gripper.
Bear Claw Quivers are available in 3 & 5
arrow versions...
Bear Claw Quiver, the
ideal treestand quiver,
in all of the hot camo
patterns...
• Mossy Oak Infinity
• Realtree Xtra
• Realtree APG HD
• Mathews Lost Camo
• Mathews Lost AT
• Black (5 arrow only)
• Skulz Camo (5 arrow only)
Now with a smaller and more
compact mounting bracket...
Always hunt safe!
Works great with mechanical
broadheads!
When your foam gets worn out, you
should replace it. The Bear Claw
Replacement Foam is cut from top
quality ethafoam and will hold your
arrows safely until you are ready for that
next shot.
Available for 3 and 5 arrow versions.
V-Twin arrow rests...
There are more varieties of arrows and different cam systems than ever before. Sometimes certain
combinations of the two can be a little more challenging to tune than the dealer or consumer wants.
At times it is necessary to vary the pressure on one side of the arrow to compensate for a particular
cam system or arrow combination. The V-Twin Arrow Rest from Xtreme Hardcore Gear™ has a great
way of dealing with this issue. Independent adjustable spring tension on each fluoropolymer launcher
allows for custom tuning of side and downward tension. Combine this with the rubber mounted top
capture option and you get one of the most adjustable full capture rests on the market today. Billet
machined aluminum body and fluoropolymer launchers make the V-Twin Arrow Rest extremely
durable and quiet enough to harvest the wariest of big game.
The machined aluminum plunger housing holds the fluoropolymer plunger
and a compression spring, with the spring tension controlled by the
adjustment of the set screw. The plunger system is extremely forgiving and
easy to tune.
When paper tuning, for example, you would turn the screw in on the left
plunger spring to increase tension and correct a slight left tear. Larger tears
in the paper will be adjusted with normal windage and elevation adjustments
to the rest body itself.
Fluoropolymer has a very low
coefficient of friction, so the
arrow is quiet and smooth
during the draw cycle.
Whisperflite Arrow Rest
Affordable, innovative, rugged, and easy to set up...
In 2006, Alpine introduced the Whisperflite Fall Away Arrow Rests and today the legacy
continues to grow. Independent testing on over 15 different fall away rests awarded
Alpine the #1 best pick in the “Best Bang For The Buck” category in a recent head to
head comparison. This innovative rest is a “no bones about it” product… Alpine has
achieved this by taking into account every possible feature… Built in arrow holder on the
launcher, independent windage and vertical adjustment, universal mounting holes, buss
cable or cable slide pull option, sealed ball bearings, black anodize and the list goes
on…
Alpine’s Match Grade
Whisperflite Rest is built using
dual ball bearings with one
bearing mounted into each
side of the mounting bracket to
assure absolute accuracy shot
after shot for years of trouble
free shooting.
“Six Shooter Weight System” ...
Your arrow is placed between the 3 fluoropolymer
pins for absolute control. The 2 lower plungers are
spring loaded and compress as the arrow is placed
into capture mode. The upper pin is mounted in a
rubber housing that will flex out of the way when
placing the arrow in capture mode, or when the
arrow is released during the shot. This top capture
pin can also be removed if so desired for simple
launcher style shooting without full capture.
MR Series Stabilizer, superior dampening,
compact, and adjustable...
Rest is available in RH
only
• 3” Carbon fiber rod
• Mass weight is 6 to 8 oz.
• Length is 5.5 inches
xhcg stabilizers...
The Phantom XR7 has a custom wrapped carbon main tube with two adjustable
dampening modules for added vibration and noise control. The flexible rubber body
absorbs vibration like a sponge and the carbon film dipped head weight adds the
right balance for the ultimate shooting experience.
Weight 8.5 oz.
Available in Carbon Fiber finish.
The Phantom XR is a great all around stabilizer. With an overall length of 4.5” and a weight of
6.5 ounces, you will have a stabilizer offering lots of recoil and vibration control in a compact
package.
Available in Carbon Fiber finish.
The Phantom ZR7 has all the features of the XR7, with the addition of the Mathews
Harmonic Damper® installed in the head weight. Our custom wrapped carbon main
tube is fitted with two adjustable dampening modules for added vibration and noise
control. The flexible rubber body absorbs vibration like a sponge.
Weight 9.5 oz.
Available in Lost Camo, Lost AT, and Carbon Fiber finishes.
*Mathews Dealer Exclusive Item*
The Phantom ZR is a great all around stabilizer. With an overall length of 4.5” and a weight of
7.5 ounces, you will have a stabilizer offering lots of recoil and vibration control in a compact
package, with the addition of the exclusive Mathews Harmonic Damper®.
Available in Lost Camo, Lost AT, and Carbon Fiber finishes.
*Mathews Dealer Exclusive Item*
xhcg bow slings...
stabilizer accessories...
V-Loc Ultra Bow Sling
Every bow has different balance characteristics, and depending on which accessories you use,
those characteristics can change considerably. Putting a sight, rest, and quiver on a bow can add
a lot of weight to one side. Stabilizers and stabilizer mounting holes are great ways to address
balance problems, but that only adds weight to the center line of the bow. Xtreme Hardcore Gear™
has designed the V-Loc Ultra Sling System™ which allows the stabilizer and its weight to be custom
positioned to offset the weight of added accessories. No one says the stabilizer has to be down the
center. Why not balance your bow the way you want it to be?
Made with billet machined components and a rugged positioning lock, the V-Loc is sure to be as
durable as it is reliable. The V-Loc System™ is available in the Ultra Bow Sling or the Adjustable
Stablizer Mount. Don’t compromise the performance and balance of your bow any longer. Pick one
up at your local dealer today.
V-Loc Adjustable
Stabilizer Mount
The Adjustable Stabilizer Mount is perfect for
balancing your bow when you don’t use a bow sling.
This mount can be mounted in the front stabilizer
hole, or rear mounted, if your bow is tapped for a
reverse stabilizer mount.
Our Dampening Modules will compliment any
stabilizer set-up that uses a .860 diameter carbon
rod. Add as many as needed to get the desired
effect.
Note:
Swing arms are black. Shown in red for illustrative purposes only.
V-Loc Z1 Stabilizer / Sling with Mathews
Harmonic Damping®
The V-Loc Z1 Stabilizer is perfect
for the shooter that wants added
balance and vibration control in a
super compact design. The Mathews
Harmonic Damper® and offset control
arm weigh 6.5 ounces, and offer the
feel and performance of many full
size stabilizers in an ultra compact
package.
*Mathews Dealer Exclusive Item*
Flex Couplers come in 2 sizes.
1” diameter and .750” diameter. Use to customize the feel and
recoil of your target set-up.
V-Loc Mounts & Slings lock in
place with a 6-32 screw that
locates into the serrations
around the bottom of the
mount body.
Target Head Weights in 2 weight
and size combos.
Small weight is .75” diameter and .5 oz.
Large weight is 1” diameter and 1.3 oz.
Machined channel mates
to your riser and keeps the
mount from rotating.
Xtreme Hardcore Gear™ Carbon Fiber Stabilizer Tubes in standard .860 diameter for
target shooting.
We build these tubes with machined aluminum tube ends, finished in a distinctive
red anodize. Tube ends are tapped with the ATA standard 5/16-24 thread. Tubes are
finished with a durable high gloss clear coat and come in the following sizes:
3.5“, 6”, 18”, 24”, and 30”.
xtreme hardcore gear
firearms products section...
The Mach 5 Cable Slide features a
fluoropolymer slide surface, press fit into
a rubber, vibration dampening sleeve, and
capped off with a space age looking slide
body that is fitted with a termination point
for a fall away rest pull cord if desired.
Alpine Archery has created this cable slide
by combining fluoropolymer and rubber into
a high-tech composite housing, making the
Mach 5 the best cable slide available.
Available in black, brown, camo, or carbon
fiber dip/red.
This exploded view drawing shows the Mach
5 components as they are assembled into the
slide.
Rope pull hole for fall away rests.
Streamlined composite body.
Rubber dampening sleeve isolates & reduces
vibrations.
The fluoropolymer liner and rubber sleeve
have a locator hole to keep them mated and
aligned with the alignment post in the composite
body.
TRU Level™ Picatinny Mount for the legendary Ruger® 10/22®...
Alpine Super Duster Wind Tester
Alpine’s Wind Tester is designed to eliminate fumbling
for or even loosing your wind tester while stalking
game and checking wind direction. By hooking it to
your belt or pack, you always know where it is, plus it
allows you to keep hand movement to a minimum and
remain undetected by your quarry. It is assembled using a
shock cord to give you additional reach away from your body
to pick up subtle wind movements. Since the bottle hangs with
the nozzle in the down position, your powder is always charged in
the tip, and ready for action.
*Powder comes in white, not green*
Top accuracy requires a level gun. Even a slight canting of your rifle will cause
windage errors. The TRU Level Pic Rail features a precision level housed in the CNC
machined picatinny base. This mounting system protects the level from being bumped
out of plumb during hard use.
The unique location also keeps your level and scope eye piece in the same sight
picture, allowing you to check the level when aiming, without raising your head from
the shooting position.
If you are serious about rimfire shooting and varminting, you need a TRU Level
Picatinny Mount on your tricked out Ruger® 10/22®.
Available in Black & Clear Anodize
10/22® TRU Level™ Picatinny Mount Specifications:
Material: Source USA Mills
Finish:
Mounting Screws: (4) Source USA
Picatinny Configuration:
6061 T-6 Aluminum
Black Anodize Mill Spec 8625 Type 3 Hardcoat
6-48 Torx #15 @15 Inch Pounds.
(14), MIL-STD 1913 Picatinny Cross Slots.
xhcg scope mounting
accessories...
xhcg ar
tactical level...
TRU Level™ Pic Rail Centerfire Rifles
AR Tactical Level
Long range shooting requires a level gun, as any tilt in
the gun translates into a serious windage error at longer
ranges. When using the TRU Level™ Scope Base, your
level and scope eye piece are in the same sight picture.
This allows you to check the level while aiming without
having to raise your head from the shooting position.
With the level housed in the machined picatinny base,
it is protected from being bumped out of level as often
happens with some scope level systems. If you are
serious about long range shooting, you need a
TRU Level™ Picatinny Mount.
The new AR Tactical Level offers the mid to long
range AR shooter an anti-cant device that is compact
and mounts completely out of the way. The sides are
sculpted so you can easily reach the charging handle
with no chance of snagging the level mount. No more
worries about tearing off or bumping a level that
protrudes from the side of the pic rail. The TRU Level is
always in your sight picture while shooting, so no more
lifting your head to check the cant of your rifle while
executing a shot.
• Precision level mounted into a CNC machined picatinny base for perfect level to base
alignment.
• Constant level verification when in head down shooting position.
• MIL-STD 1913 Picatinny Cross Slots.
• Billet machined 7075 T-6 Aluminum. Source USA Mills
• Black Anodize Mill Spec 8625 Type 3 Hardcoat
• Mounting Screws: (4) 6-48 Torx .225 Head dia. @ 22 Inch Pounds. Source USA
Gun Model
Remington 700
Winchester Model 70
Build with 3 screw holes in the rear to
fit both Long and Magnum actions.
Savage Mod110, 111, 114, and 116
Savage Mod10, 11, 14 and 16
Savage Mod 112
Savage Mod 12
Action type
Long action
Short action
Long action
Short action
Long/Magnum
action
MOA spec
0 MOA
0 MOA
20 MOA
20 MOA
20 MOA
Long action
Long action
Short action
Short action
Long action
Short action
0 MOA
20 MOA
0 MOA
20 MOA
20 MOA
20 MOA
Recoil lug
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
Specifications:
• Constant level verification when in head down
shooting position.
• CNC machined 6061 T-6 aluminum. Source USA
Mills
• Black Anodize Mill Spec 8625 Type 3 Hardcoat.
• Fits all AR15 rifles with MIL-STD 1913 Picatinny
Cross Slots.
• Side cut at the rear for ample hand clearance when
operating the charging handle.
• The Height of the level body from the top of the pic
rail to top of level is .375”
The “Tank” Crosshair Leveling Device
xhcg tactical long range rings...
New, Force Recon Tactical Scope Rings
The Force Recon Tactical Rings feature a built in level housed into the lower portion of the rear scope
ring. Having the level in the base of the ring assures that it is always perfectly parallel to the top of the
picatinny rail which is essential for long range shooting. A perfectly plumb scope and rifle are essential
for the bullet to follow a true vertical line throughout the projectile's path to the target.
These precision, long range rings offer precise mounting for your optics onto the picatinny base and
will not allow the scope to move under any recoil scenario. Our wide .875 mounting platform offers a
stable interface with the pic rail while the 2 cross slot bolts provide awesome clamping power. We go
one step further by installing a pair of stainless steel guide rails that press into the ring base. The ring
base clamp rides on these rails to keep the clamp perfectly aligned as the 2 cross slot bolts are drawn
tight against the pic mount.
The “Tank” is CNC machined from solid steel to give it
the weight necessary for no-hassle crosshair leveling.
First, your rifle's action must be level. Then to level the
crosshair in your scope to the leveled action, place the
“Tank” on top of your elevation turret with the scope ring
caps loosely in place. Then rotate your scope until the
bubble lines up between the lines in the tank and you
are now plumb to the rifle. Finally, tighten the scope ring
cap screws evenly until tight and you are ready to hit the
range.
Specifications:
Force Recon & Ranger Precision Scope Rings
Ring Bore Diameter:
Ranger Tactical Rings...
The Ranger Rings offer all of the same design
and features as our Force Recon rings, except
for the integrated level. If you want the best in
a 30MM tactical ring this is it!
Material: Source USA Mills
Finish Anodize:
Ring Height 30mm Medium:
Top of pic mount to bore center
Ring Height 30mm Medium:
Top of pic mount to bottom of the scope bore
Ring Height 30mm Low:
Top of pic mount to bore center
Ring Height 30mm Low:
Top of pic mount to bottom of the scope bore
Ring Height 34mm:
Top of pic mount to bore center
Ring Height 34mm:
Top of pic mount to bottom of the scope bore
Cap Screws: (6) Source USA
Clamp Screws: (2) Source USA
Clamp guide Rails: (2) Source USA
30mm Tol. +/-.001
34mm Tol. +/-.001
Billet 7075 T-6 Aircraft Aluminum
Black Anodize Mill Spec 8625
Type 3 Hardcoat
1.000”
Rings are matched within .003
.406”
Rings are matched within .003
.850”
Rings are matched within .003
.260”
Rings are matched within .003
.900”
Rings are matched within .003
.235”
Rings are matched within .003
8-40 #15 Torx @ 20 Inch Pounds
10-24 SHC Grade 8
.125 Precision dowel pins
Josh Cluff, HS Precision Sales Manager, with a great South
Dakota mule deer. Josh is an avid bowhunter and precision
long range rifle shooter.
Dustin Bomley, Alpine and XHCG Production Manager, with a fine
Idaho bull.
XHCG Firearms accessores...
bow specifications...
AR Muzzle Brake
These brakes are designed to be installed on 223/5.56 cal. AR15 rifles with .750 barrels. This
brake will reduce recoil and muzzle jump significantly and improve your time on target with follow
up shots and double tap drills..
BOW
MODEL
IBO
Rating
Draw
Length
Draw
Weight
Brace
Height
Bow
Axle
to
Axle
Bow
Mass
Weight
Color/
Pattern
Cam
Style
Grip
Material
String
Length
Buss
Length
String
Mat.
Letoff
ROXSTAR 6.5
RH only
332 fps
@ 30”
28-31”
modules
60, 70#
6.5”
34.5”
4.4#
REALTREE APG
V3g
Rosewood
1 piece
57.75”
33”
+ yoke
8125
80%
ROXSTAR 7.5
RH only
328 fps
@ 30”
29-32”
modules
60, 70#
7.5”
34.5”
4.4#
REALTREE APG
V3g
Rosewood
1 piece
57.75”
33”
+ yoke
8125
80%
VERDICT
RH only
328 fps
@ 30”
28-31”
modules
6.75”
31.5”
4.2#
REALTREE APG
V3g
Rosewood
2 piece
54.75”
29.5”
+ yoke
8125
80%
We make 416 stainless steel and 4140 carbon steel muzzle brake blanks for gunsmiths. These brakes are precision machined on our CNC turning
centers.
F1 FIREBALL
RH only
327 fps
@ 30”
27-30”
modules
60#
6.125”
34”
4.2#
BLACK/CAMO
OR
CAMO
V3g
Rosewood
2 piece
56.5”
31.5”
+ yoke
8125
80%
Although we call this a blank, we do most of the work for you. They are threaded and counter-bored for the barrel thread and shoulder. The 30
ported holes are .191 diameter and chamfered to save you time.
We have drilled a .250 dia. pilot hole through the brake, and you must finish bore that hole to accommodate the caliber of the gun build plus .020
overbore clearance. These brakes are sold to gunsmiths only, as professional installation is required to make sure the correct bore size is used in
the gun build.
FRENZY
295 fps
@ 30”
23-29”
rotating
60#
6.5”
30.75”
3.0#
CAMO/BLACK
Graphic
Domed
51.375”
32.5”
BCY
652
65%
BOWFISHING
23-29”
rotating
30-50#
range
6.5”
30.75”
3.0#
BLUE WATER
DROPS
Graphic
Domed
51.375”
32.5”
BCY
652
65%
RUCKUS
Teen
22-28”
rotating
30-50#
range
6.5”
30.75”
3.0#
INFINITY/BLACK
OR
PINK CAMO/
BLACK
Radial
Force
Graphic
Domed
49.625”
32.5”
BCY
652
65%
ROOKIE
Youth
19-25”
rotating
10-35#
range
6.0”
28”
2.5#
BLACK/CAMO
OR
BLACK/PINK
CAMO
Radial
Force
Graphic
Domed
44.5”
30”
BCY
652
65%
Specifcations:
Thread: 1/2-28 Class 2
Material: 4140 Carbon Steel
Finish: Black Oxide
Gunsmith Installed Muzzle Brake Blanks
Gunsmith Installed Muzzle Brake Blank Specifications
416 Stainless 1.00 diameter 5/8”-24 thread
2.00” overall
Steel
length
.875 diameter 9/16”-28 thread 2.00” overall
length
.750 diameter 1/2”-28 thread
2.00” overall
length
4140 Carbon
1.00 diameter 5/8”-24 thread
2.00” overall
Steel
length
.875 diameter 9/16”-28 thread 2.00” overall
length
.750 diameter 1/2”-28 thread
2.00” overall
length
MAKO
60, 70#
PART # HC-91110
PART # HC-91111
Radial
Force
Radial
Force
PART # HC-91112
PART # HC-91115
PART # HC-91116
PART # HC-91117
NOTE: Draw lengths, brace heights, and axle to axle lengths
are approximate due to soft harness systems.
All yokes are 15.25” long
clothing...
This hooded sweatshirt is a 50/50
blend fleece. Double layer hood,
drawstrings, and kangaroo pocket.
Middle chest Alpine logo & “Team
Alpine” down left sleeve. Black.
Mens Sizes: SM, MD, LG, XL, and
XXL.
Alpine short sleeve Mako tee with front Alpine logo, shark
on right sleeve, and Mako graphic on back. Gray.
Mens Sizes: SM, MD, LG, XL, and XXL.
These short sleeved polos have
the front embroidered Alpine logo
and are stone washed in Taupe
and Coal.
Mens Sizes: SM, MD, LG, XL, and
XXL.
Alpine hats with embroidered logo.
Available in Black, Sage, Brown, and
Pink Camo.
One size fits all.
Alpine short sleeve bow tee with
front Alpine logo, deer skull on
right sleeve, and bow graphic on
back. Blue.
Mens Sizes: SM, MD, LG, XL,
and XXL.
For the ladies!!! This HOT black
ribbed boyfriend tank is 100%
cotton, has a longer length, and
is form fitting. Comes with Pink &
White Alpine logo on the chest and
“Fear the Force” across the lower
back. Black. Junior Sizes: SM,
MD, LG, XL, XXL.
Be a part of Team Alpine!!!
Short sleeve 100% SoftCool moisture wicking
fabric.
Blue & Gold shirt with Alpine logo and “Staff
Shooter” on left chest with full size logo on the
back. (Available to anyone)
Mens Sizes: SM, MD, LG, XL, XXL, and 3XL.
Alpine long sleeve tee with front Alpine logo &
“Team Alpine” down left sleeve, and bow graphic
on back. Green.
Mens Sizes: SM, MD, LG, XL, and XXL.
Alpine Archery
PO Box 319
3101 North South Highway
Lewiston, ID 83501
208-746-4717
www.alpinearchery.com
Business hours: Monday through Friday 8 AM to 4:30 PM
(Pacific Time)
Catalog requests and email address: [email protected]
Alpine Archery is licensed under one or more of the following U.S. patents.
#4,241,715 #5,368,006 #5,809,982 #4,748,962 #5,020,507 #6,990,970
Visit these other fine Alpine companies
xtremehardcoregear.com
208-746-7065
lilmacmolds.com
208-743-3858