Dilip Ramkrishna Peshwe Professor Areas of Interest: Physical

Dilip Ramkrishna Peshwe Professor Areas of Interest: Physical

Dilip Ramkrishna Peshwe
Professor
Areas of Interest: Physical Metallargy, Composites & Solidification
processing , Polymer.
Contact Details:
Dr. D.R. PESHWE
Professor
Department of Metallurgical & Materials Engineering ,
Visvesvaraya National Institute of Technology,
South Ambazari Road,
Nagpur :440010.
Maharashtra (India)
E-mail: [email protected]
[email protected]
Office no:+ 91 – 712 – 280 1385
Name : Dilip Ramkrishna Peshwe
Designation / Deptt. : Professor
Department of Metallurgical & Materials Engg.
Visvesvaraya National Institute of Technology,
Nagpur
Academic Qualification :
S.N.
Degree Held
Name of Institution /
University
Year of Award of Degree
Specialization
1.
B.E.
(Metallurgical
Nagpur University
1983
Metallurgical
Engineering
(1st Merit)
Engineering)
M.Tech
2.
3.
Ph.D.
(Metallurgy)
*
Nagpur University
1985
FAT & ASM
Nagpur University
(1st Merit)
1993
Wear Behavior.(*)
Topic: The role of second phase particles on the adhesive and abrasive wear behavior of Al-Zn base
bearing alloys.
5. Awards / recognition 1.For securing highest marks in B.E. (Metallurgy)
Examination received – Jawaharlal Nehru Memorial
Trust Award, New Delhi.
2. Received BEST PAPER AWARD for the paper
entitled “Characterization of graphite nodules in as
cast low CE ductile iron, Indian Foundry journal,
Volume 51, No.11, November 2005, PP 35-42, in the
National convention at Gwalior, MP.
3. Best S&T Innovation award of KVIC, GOI on 20th
Nov.2007 at New Delhi for the various technologies
developed for the rural sector
4. Appointed on Higher & Technical Education
Committee of Vidarbha Statutory Development
Board, Nagpur.
5 . Nominated on Indian Academy of Social Sciences
as Joint Secretary
6. Employment Record :
S.N. Position Held / Designation Period Period in
Name of the
Years
Employer
From
To
1.
Lecturer
July 84 April 98 14
VRCE,
Nagpur.
2.
Asst. Professor
May 98 May 2006 08 VNIT, Nagpur
3. Professor In-charge (Training Aug. 99 May 2000 VRCE,
& Placement)
Nagpur
4.
Dean (Exams)
Sep. May 2006 04
VNIT,
2002
Nagpur.
5
Professor
May
Till date 04 VNIT, Nagpur
2006
6
HoD, MME
Feb.
Feb. 2010 02 VNIT, Nagpur
2008
7. Research & Development :
Individual Research Contributions:
(a) No. of M.Tech Project Completed -
25
(b) No. of M.E. (By Research) - Completed : 05
- Ongoing :
01
(c) No. of Ph.D. Guided - Completed :
06
(Please refer Annexure – I) Ongoing : 06
(d) No. of Publication : (Please refer Annexure II)
Particulars
1. i) International Journals
Number
24
1. ii) National Journals
18
1. iii) International Conferences
25
1. iv) National Conferences / Seminar / Workshops
38
1. v) Patent
01
Total
106
(e) R&D Project- Coordinated & Completed 10 R&D projects of GOI, amounting to Rs. 2.00 crores
8. Foreign Visits :
1. Visited University of Sheffield Hallam for the specialized training on “Polymer Processing” during 19941995 as TCT Fellow.
2. Attended a specialized programme on “Education Technology” at University of Huddersfield U.K
3. Attended a specialized programme on “Business Development & Marketing” at University of Manchester in
the year 1998-1999
4. Attended International Conference on “Corrosion 2005: Science & Economy, New challenges” at Institute of
Precision Mechanics at Warsaw, Poland during 8th –10th June 2005 and visited various universities in Germany
& France.
9. Details of R&D Project
Sr.No.
1.
2.
Title of the Project
Fund
Sponsoring Period Status
Received
Agency
Modernization & Removal of Obsolescence (MRO) Rs.10.00 lacs MHRD (1993) 2 years Completed
of Physical Metallurgy Laboratory – (MODROB)
Co- Coordinator – D.R. Peshwe
Development of Polymer blends (R & D)
Rs.05.00 lacs MHRD (1998) 3 years Completed
Joint collaboration with VIP Industries, Nagpur.
3.
Co – Coordinator – D.R. Peshwe
Modernization and removal of obsolescence of
welding and wear testing laboratory (MODROB).
Rs. 10.00
lacs
MHRD (2002) 2 years Completed
4.
Coordinator- D. R. Peshwe
Development of Technical Interface for Northern &
Eastern Maharashtra & Chhattisgarh for Rural
Rs. 60.00
lacs
KVIC (2003)
5 years Completed
Industrialization
5.
6.
7.
8.
Coordinator- D. R. Peshwe
TEQIP on Tribal Development, Community projects
& Staff development program
Rs. 40.00
lacs
10.
5 years Completed
Coordinator- D. R. Peshwe
Effect of Weld Metal Chemistry and Welding
1 years Completed
Rs.12.00lacs M/s ADOR
welding systems,
Process Parameters on Microstructure and Properties
of Weld Metal in SMAW Process Coordinator- D. R.
Mumbai
Peshwe
Investigation of load sequence effects in fatigue of Rs. 8.37 lacs
AR & DB
4 years Completed
damaged composite laminates and characterization of
fatigue damage
(M&P Panel)
Co-coordinator – D. R. Peshwe
Fatigue of composites containing ply-drops.
Rs. 6.14 lacs
AR & DB
2 years Completed
Rs. 7.45 lacs
(Structures
Panel)
AR & DB
2 years
Co-coordinator – D. R. Peshwe
9.
MHRD
Effect of ply-drops on the fatigue behavior of
composites by VERITy process.
Co-coordinator – D. R. Peshwe
Effect of retro ageing and reaging treatments on
7010 Al alloy
Rs. 27.00
lacs
In
progress
(Structures
Panel)
Naval Research 2 years
In
Board
progress
Co-coordinator –
11.
D. R. Peshwe
Development of Carbidic Austempered Inoculated
Low Carbon Equivalent Iron
Rs. 50.00 Deptt. of Science 3 years
In
lacs
& Technology
progress
Co-coordinator –
12
(DST)
D.R.Peshwe
Influence of normalizing & tempering heat treatment Rs.82.14 lacs
on tensile & creep properties of grade 92 steel
BRNS
3 years
In
progress
Co-ordinator- D.R.Peshwe
10.Curriculum Development
A: Participation in Summer / Winter School
Sr.No
1.
2.
Title / Name
Period
From
05th Dec.
To
20th
Dec. 85
Entrepreneurship Development for Western 06th June 18th
Design of Metallurgical Processing Units.
Name of the Sponsor
REC, Rourkela.
Entrepreneurship Institute of India,
3.
Region Technical Teachers.
Solidification and casting processes
10 June
4.
Characterization of Materials
12th June
5.
Polymer Processing
6.
Business Development & Marketing
16th Oct.
95
th
08 June
th
June 98
25th
June 90
27th
June 91
10th
June 96
16th
Aug. 99
Gandhi Nagar, Gujarat.
University of Roorkee.
I.I.T., Delhi.
Sheffield Hallam University. U.K.
University of Manchester. U.K.
B: Seminar / Conference Attended :
S.N
1.
2.
3.
4.
5.
6.
Title
Period
National /
International
From
To
Entrepreneurship Development for Western Region, Entrepreneurship 06/06/1988 18/06/1988 National
Institute of India, Bhat, Gandhi Nagar, Gujarat.
Industry – Institute Co-orelation, at Dept. of Met. Engg., REC,
28/01/1989 29/01/1989 National
Rourkela
Alloy Design and Development, at Dept. of Meta. Engg. University of 10/03/1989 11/03/1989 National
Roorkee, Roorkee
Aluminium – strategies for the Nineties and Beyond (INCAL), at 31/07/1989 02/08/1991 International
Indian Institute of Science, Bangalore
Materials for Thermal Power Plants, at M.A.C.T. Bhopal
10/09/1993 11/09/1993 National
Metallurgical quality control and inspection, Dept. of Met. Engg., 01/11/1994
National
VRCE, Nagpur
C: Continuing Education Program :
Nature of Short Term Course
STUP on Welding Engineering
Workshop on welding of stainless steels.
STUP on Failure Analysis of Engineering Materials
Coordinator Duration Organization
etc.
D.R. Peshwe 15 days
S.I.D.B.I.,
Nagpur
D.R. Peshwe 02 days
UK – REC
D.R. Peshwe 15 days
STTP on Failure Analysis of Engineering Materials & Residual Life D.R. Peshwe 15 Days
Assessment
31-1-05
to
S.I.D.B.I.,
Nagpur
AICTE
11-2-05
a) Lecture delivered regularly at the following courses.
•
-Invited to deliver special lectures in orientation / refresher courses. – Personality Development of
Teachers, Anandwan, Social Sensitization, Use of Teaching aids, Autonomy, Industry-Institute
Interaction etc.
•
-Delivered various technical lectures during STTP Programs, workshops & conferences on the areas
such as Nano technology, Selection of Materials, Wear Behavior of Materials, Physical Metallurgy of
Steels and Cast Irons, Welding Metallurgy & Casting of Materials.
• -Delivered Keynote Lectures on various topics such as “Advanced Materials”, “Use of modern
technology for teaching aids”, “Impact of Nano-technology on society” & “Challenges in engineering
& technological education in global scenario” at various conferences & seminars.
11.Academic / Administrative Responsibilities at Institute or Departmental Level.
•
•
•
•
•
•
•
•
-Active member in UK – REC program.
-Departmental coordinator for POA Scheme.
-Chairman, Dept. Store Purchase Committee (DSPC)
-Chairman & Member, Board of Studies in MME
-Course Director (UG), Dept. of MME
-Dean Examination
-Member of Senate, Senate Standing Committee, Central Research Committee and Central Examination
Committee.
-Prof. In-charge – AAROHI- A Socio-cultural organization.
12. Membership of Professional Societies.
-Secretary, Indian Institute of Metals, Nagpur Chapter.
-Ex-secretary, Indian Society for Non-destructive Testing.
13.Association with the RTM Nagpur University Bodies.
Member Board of Studies / Faculty (NU).
Member of Senate (NU)
Member of Management Council.(NU)
Member of Board of Examination(NU)
Member of Academic & Administrative Audit Committee of Nagpur
University
Member Expert Committee for the development of Gadchirolli Sub-centre of
NU
Also worked on various sub-committees of University for selection of panels
for Teachers, Convocation, Academic reforms & Examination reforms.
14.Extra Curricular / Social / Cultural Activities.
•
•
•
-Secretary, College Teachers Sports Council, Nagpur
-Ex-Joint Secretary, VNIT Staff Association.
-Ex-President & Member, VRCE Co-operative Path Sanstha.
15. Products/ Process Development and Technology Transfer / Patents:
:
1992 – 2000
:
2000 – 2002
1996 – 2000
:
:
:
2000 – 2002
2000 – 2002
2000 – 2002
2002 – till date
:
2004 – till date
1996 – 2002
•
¬ Development of laminates from agricultural & forest wastes and modification of artisans tools for
improvement in tool life were developed and the same technology is now ready for transfer at various
Clusters. The group members are D.R. Peshwe , Dr. R. K. Paretkar, Dr.P M Padole, Dr. A D Phophale
&Dr.V.K.Deshpande
The technologies developed by the Technical Interface at VNIT Nagpur are :
• The materials and heat treatment optimization for rural blacksmithy.
• Development of Double roller ginning and pressing machine.
• Low cost mechanized machine for stirrup making.
• Hand operated Dhup stick making machine
• Development of laminates form agricultural wastes.
¬ Filed a Patent on “Method for producing white light” with the team comprising of Mr. Abhay Deshmukh,
Dr. Sanjay Dhoble & Dr. Animesh Kumar, NEERI Nagpur.
16. Any other items not covered above.
- Successfully Developed Examination System for VNIT (Deemed University) and also drafted various
ordinances related to the examination, and declared the results of last seven examinations within the 96 hours
from the last date of examination.
- Member of Board of studies in Metallurgical & Materials engineering of College of Engineering, Pune.
- Joint Secretary in the Governing Board of Bharatiya Shikshan Mandal, Nagpur, which is
schools and a junior college in Nagpur.
-
Associated with the Govigyan Anusandhan Kendra, Deolapar for various technical activities
-
Associated with Maharogi Seva Samiti Warora (Anandwan) for the various technical projects
running four
- Associated with Lok Biradari Prakalpa, Bhamaragad for various technical projects related to the Forest &
Agro based products.
-
Associated with Somnath project for the development of various agricultural based YuvaGram projects
-
Successfully organized first four convocations of VNIT (Deemed University).
PHOTOGRAPHS OF VARIOUS ACHIEVEMENTS AND ACTIVITIES.
CERTIFICATE OF EXCELLENCE
S & T INNOVATION AWARD
GIVEN TO
VNIT, NAGPUR TEAM HEADED BY Dr. PESHWE
FOR THE CONTRIBUTIONS IN THE FIELD OF RURAL ENGINEERING.
ANNEXURE – I
List of Ph.D. and M.E. (by Research) Students
S.No
Name of
Student
Reg.
Year
and
status
Thesis Title
Other
Completed/Ongoing
supervisor (s)
(if any),
name &
department
(FT/PT)
1. P.P.Deshpande July
Synthesis &
1999 Characterization
S.U.Pathak
of conducting
Polyaniline
2.
Mrs.
June Modified Nylon
D.S. Kelkar
S.A.Pande
2004
11:study &
development of
Piezoelectric Inst. of Science
Polymer
3.
Ajay A.
July
Performance
Likhite
2003 Evaluation of
Ductile iron
produced from S.U.Pathak
Low Carbon
equivalent iron
melts.
4.
Manoj
June
Study of
R.K.Paretkar
M.Humane 2002
processing
Degree awarded in
2004.
Degree awarded in
2007.
Degree awarded in
2008.
Degree awarded in
2010.
5.
C.L. Gogte
June
2004
6. Rashmi Pathak Jan.
2007
7. Ms. Manjusha Jan
S. Duragkar 2004
8.
Mrs. Varsha
A. Chourasia
Jan
2004
9.
Ms. Gauri S.
Deshmukh
June
2007
10.
Mrs. S R.
Charde
June
2007
11
Ms. Kavita
Pande
April
2009
12
Ashwini
Kumar
Sharma
June
2010
Parameters on
Structure
property
relationship of
Ultra low
Carbon
(Interstitial free
) Steel Sheets.
Study of effect
of deep
cryogenic
R.K.Paretkar
treatment on
tool steels
Development
and Synthesis
Dr. S.U.Pathak
of PET-PBT
blends
Study of
Fatigue
S.A.Paranjape
properties of
(M/s. Weldmet
Fiber reinforced
Tech.)
Polymer based
composites
To study &
develop the
Methodology
for improving
R.K.Paretkar
the life of
traditional tools
( artisan made )
in the rural area
Dr. S. U.
Development &
study of PBT
Pathak
composites.
Dr. J. D. Ekhe
A FEM based
Dr. R. K.
model to predict
Paretkar
creep properties
of 316 LN S.S.
Dr. M. D.
weld joint.
Mathew
Cryo-treatment Dr.Anupama
on polymer &
Kumar
polymer
composites
Development of
Rare Earth
Activated
AluminoJatin Bhatt
Silicate Based
Nanophosphors
for slid State
Degree awarded in
2009.
Degree awarded in
2010.
Degree awarded in
2007
Degree awarded in
2007
Thesis writing in
progress
Thesis writing in
progress
Work in progress
Work in progress
13
R.S.Ranade
June
2010
14
S.V.Lomte
June
2010
Kighting
Development of Dr.N.B.Dhokey Work in progress
Al-TiB2 MMC
by bxide
reduction
method
Cryotreatment
Work in progress
of Die tool
steels.
ANNEXURE – II
List of Publications
A) International Conferences
1. Mechanical Behavior of Nylon 11 & Nylon 6 Blends
S.A.Pande, D.S.Kelkar and D.R.Peshwe, International conference of ISRS-2006, Chennai, 18-20 Dec. 2006
2. Piezoelectricity in Nylon 6 / Nylon 11Blend Composition
S.A. Pande, D.S. Kelkar, D.R.Peshwe, International conference on Materials (ICMAT) 2007 at Singapore
University, Singapore
3. Piezoelectricity in PANI filled Nylon 11 – S.A.Pande, D.S. Kelkar, D.R.Peshwe, International conference on
Special Materials (SMN) 2007 at Herbin University, China. Applied Physics Letter: 0003 – 6951, 2007 &
proceedings of society of photo-optic instrument engineers (SPIE) Vol. 6423, pp 642326, 2007
4. Effect of Thermo-mechanical Processing on Texture formation and Formability of Interstitial Free (IF) and
Extra Deep Drawing Steel Sheets”, M.M.Humane, A.K.Vaish, P.K.De, Ravi Kumar, M.R.Deshmukh and
D.R.Peshwe and R.K.Paretakar, , International Symposium “SimPro” Ranchi-2004.
5.” Effect of micro alloying elements on texture formation in high formable steel sheets”
M.M.Humane, A.K.Vaish, P.K.De, Ravi Kumar, J. Swaminathan and D.R.Peshwe and R.K.Paretakar, Int. Conf.
on Microalloyed Steels, Calcutta, March 2007.
6. “Synthesis of SrAl2O4: Bi3+ , Eu3+ nanocrystalline phosphor”, A.D.Deshmukh, S.J.Dhoble, D.R.Peshwe,
International conference on nanomatarials and its applications (ICNA-2007), NIT, Tiruchirappalli 4-6 Feb
2007.
7. Electrochemical Synthesis of conducting Poly(O-toluidine) films on low alloy steels, D.R.Peshwe,
P.P.Deshpande, S.U.Pathak, Proc. Of International Conference on Chemistry & Environment, Poland, June
2001
8. Electro deposition of Poly (0-toluidine) coating on steel, P.P.Deshpande, D.R.Peshwe and S.U.Pathak.
International conference on “Corrosion 2005: Science, economy and new challenges, Warsaw, Poland 9-11
June 2005
9. Characterization of conduction polyaniline coating on steel, S.U.Pathak, D.R.Peshwe and
P.P.Deshpande, International conference on “Corrosion 2005: Science, economy and new challenges, Warsaw,
Poland 9-11 June 2005
10. Corrosion prevention by conducting polyaniline coating, D.R.Peshwe , S.U.Pathak.and P.P.Deshpande.
International conference on “Corrosion 2005: Science, economy and new challenges, Warsaw, Poland 9-11
June 2005
11. “Wear behaviour of Al-Zn base alloys with SbSn cuboids as second phase particlaes”, Proceedings of
International Conf. on Aluminum-Strategies for the Nineties and beyond (INCAL-91), Bangalore, 31st July-2nd
Aug. 1991, pp 112-120
12. Synthesis of SrAl2O4 : Cu phosphor for TL dosimelry of ionization radiation, ADDeshmukh, SJDhoble,
DRPeshwe .Proceedings of SSD 15, Netherlands, Delft, July 2007
13. Preparation & characterization of Zn Mg Al10 O17 : Cu phosphor by combustion method, ADDeshmukh,
SJDhoble, DRPeshwe Proceedings of Int-conference on Advanced materials and composites ICAMC 2007,
Trivendrum 24-26 Oct. 2007.
14. Luminescence in Lica Al Fe6 : RE (RE = Ce, Eu, Dy) phosphor, ADDeshmukh, SJDhoble, DRPeshwe ,
Proceeding of International conference. on luminescence materials and its applications, ICLA. 2008, Delhi 1316 Feb 2008.
15. Enhanced Luminescence in Bal-X M X Al 12O 19 : Eu (M – Ca and Sr) phosphor by doping Ca2+ and Sr2+
alkaline earths., ADDeshmukh, SJDhoble, DRPeshwe ,Proceeding of International conference. on
luminescence materials and its applications, ICLA. 2008, Delhi 13-16 Feb 2008.
16. Up conversion Luminescence in Eu3+ activated SeAl12O19 Nan phosphor, ADDeshmukh, SJDhoble,
DRPeshwe ,Proceeding of International conference. on luminescence materials and its applications, ICLA.
2008, Delhi 13-16 Feb 2008.
17. Piezoelectric behavior of the blended systems (Nylon 6/Nolyn 11), S.A.Pande, D.R.Peshwe, D.S.K.elkar,
Proceeding of International conference on Materials Science & Technology 2008, (5-9 Oct 2008) Pittsburgh,
USA
18. Impact of conducting filler on the dielectric properties of Nylon 11, S.A.Pande, D.R.Peshwe, D.S.Kelker.
Proceedings of International Conference on “POLYCHAR16” world forum of Adv. Materials, 17-21 Feb 2008,
19. Deep subzero possessing of Metals & Alloys – Part I C.L.Gogte, K.M.Iyer, R.K.Paretkar, D.R.Peshwe,
Proceedings of 2nd International Conference on “Heat treatment & Surface Engineering of tools & dies ” at
Bled, Slovenia (25- 28 May 2008)
20. Deep subzero processing of Metals & Alloys - Part II Evolution of microstructure of AISI & T42 tool
steel. C.L.Gogte, K.M.Iyer, R.K.Paretkar, D.R.Peshwe, Proceedings of 2nd International Conference on “Heat
treatment & Surface Engineering of tools & dies ” at Bled, Slovenia (25- 28 May 2008)
B) National Journal
1. “Characterization of graphite nodules in ac cast low CE ductile iron”, AA Likhite, DR Peshwe, SU Pathak,
Indian foundry Jouranl, Vol.51, No.11, November 2005, pp 35-42.
2. “Composites Materials : Materials for futuristic applications.” Dr. D.R. Peshwe, S.G. Sapate, Dr. S.U.
Pathak, Institution of Engineers (I) Journal Vol. 76, Nov. 1995, pages 66 – 71.
3. “Thermo-mechanical processing of low carbon, IF and IF high strength steels- Few typical cases”, D. R.
Peshwe, R.K. Khatirkar, M.M.Humne, A.K.Vaish, R. K. Paretkar, D.N. Prasad, Journal of Metallurgy &
Material Sciences, Volume 45, No.4, Oct-Dec. 2003, pp 161-191.
4 “Corrosion control by an Organic Metal”, D. R. Peshwe, P. P. Deshpande, S. U. Pathak, IE Journal, Volume
82, November 2001, pp 33-36
5. “Development of Appropriate technology for manual processes-A Structured Approch”, D. R. Peshwe, A.
V. Vanalkar, P.M Padole-accepted for KVIC Journal.
6 “Mechanical behaviour of fillers in Nylon 11”, SA Pande, DS Kelkar, DR Peshwe, Accepted for Transaction
of Indian Institute of Metals.
7. Characterization of graphite nodules in as-cast low CE ductile iron, A.A.Likhite, D.R.Peshwe, S.U.Pathak,
Indian Foundry Journal, Volume.51, No.11, Nov. 2005, pp 35-42
8. BaMgAho017 : Eu PDP phosphor for TLD applications, AD . Deshmukh, S.J Dhoble, D.R.Peshwe, Animesh
Kumar, Radiation protection & Environment, Vo1.30 No. 1-4,PP 33-35
9. Intense blue-emitting CasA1s014: Eu phosphor for mercury free lamp phosphor, AD .Deshmukh, S J
Dhoble, D.R.Peshwe, Animesh Kumar, Indian Journal of physics,83(4), PP 1-6.
10. New Eu activated Zn Mg Al 10O17 Nanophosphor, AD .Deshmukh, S J Dhoble, D.R.Peshwe, Animesh
Kumar, Journal of Alloys & compounds, 475 (2009), PP 343-346
National Conference / Seminars / workshops.
1. “Texture evolution and determination of mechanical properties in IF and IF high strength steel sheets” MM
Humane, AK Vaish, Ravikumar, PK De, RK Khatirkar, DR Peshwe and RK Paretkar, Presented in NMD-ATM
2005 held at IIT,Madras.
2. “Texture evolution in hot rolled and clod rolled-annealed IFHS steel sheets” MM Humane, AK Vaish,
Ravikumar, PK De, RK Khatirkar, DR Peshwe and RK Paretkar, Presented in NMD-ATM 2006 held at
Jamshedpur
3. “Dy3+.doped calcium aluminate for sustainable lighting”, AD Deshmukh, SJ Dhoble , DR Peshwe, Presented
in National symposium on “Recent trends on Nanostructured materials and Nanotechnology”, Bhilai 23-24
March 2007.
4. “Synthesis of ZnAl2O4 : Dy3+. phosphor for solid state lighting”, AD Deshmukh, S.J. Dhoble , DR Peshwe,
Presented in National conference on “Advances in Electronic materials and devices”, Bilaspur 25-264 March
2007.
5. “Nanophosphor : Past and future”, AD Deshmukh, SJ Dhoble , DR Peshwe, Presented in National conference
on “Recent trends in Materials science”, Sakoli, Bhandara 10 March 2007
6. “Ba MgAl10O17 : Eu PDP phosphor for TLD applications”, SJ Dhoble , DR Peshwe, GV Brahme, RG
Sonkawade, N Sinha, Presented in National conference on Accelerator and low level radiation safety, IUAC,
New Delhi, 26-27 April 2007.
7. “Importance of Industry – Institute Interaction”, Proceedings of National Seminar on Industry – Institute
Correlation, Department of Met. Engg., Rourkela, 28 – 29th Jan. 1989.
8. “Management of conflicts in Today’s organizations”, Ibid.
9. “Correlation of mechanical behaviour and wear behaviour of some Zinc base bearing alloys”, Proceedings of
All India seminar on Alloy Design & Development, DEpt. of Met. Engg. University of Roorkee, Roorkee, 10 –
11th March 1990.
10. “Wear behaviour of some aluminum alloys”, 44th ATM meeting of IIM, Triuchirapalli, 13 – 15 Nov. 1990.
11. “Production of spheroidal graphite malleable cast iron – A hybrid cast iron”, Proceedings of All India
seminar on Special Casting Processes (SPECAST), VRCE, Nagpur, 13 – 14th March 1992, pp 1-2.
12. “Use of silicon carbide as a chill material”, Ibid, pp 42-43.
13. “Computer Aided Design for Gating and Risering of ferrous castings”, Ibid, pp – 118-127.
14. “Philosophy and Design for the selection of Materials for Thermal Power Plants”, National Seminar on
Materials for Thermal Power Plants, Inst. Of Engrs.(I), Bhopal, 10 – 11th Sept. 1993.
15. “Adhesive wear behaviour of Al – Zn base alloys – A new approach (RamaRao Theory)”, 47th ATM
meeting of IIM, Hyderabad, 17 – 19th Nov. 1993.
16. “Abrasive wear behaviour of Al base alloys”, Ibid..
17. “Composite Materials : Novel Materials”, National seminar on Polymer, ceramics and composite materials,
organised by The Institution of Engineers (I), Bombay, 27 – 28th Jan. 1995.
18. “Tribological behaviour of HVOF sprayed Tungston carbide coatings”, Dr. D.R. Peshwe, Ashok Chandak,
K.M. Nayak, G. Balasubramium, proceeding of 36th Annual technical meeting of Indian Institute of Metals,
1998 pages 165 to 168.
19. Tribological study of plasma and HVOF sprayed WC – Co castings”, Dr. D.R. Peshwe, Ashok Chandak,
K.M. Nayak proceedings of 38th Annual tech. Meeting of IIM 2000.
20. “A new approach to correlate oxygen in weld metal with flux composition process parameters and weld
composition in SAW process”, DR. Peshwe, S.R. Desai & S.A. Paranjpee, proceedings of 38th annual tech.
Meeting of IIM’s 2000.
21. “Wear by Erosion of some weld deposited steels”, D.R. Peshwe, S. G. Sapate, A.V. Ramarao, Proce. of
National seminar on Advances and Processing, IIT Roorkee, 9/10 Nov. 2001, pp 55-59.
22. “Conversion of industrial waste into glass ceramic products”, D. R. Peshwe and V. K. Deshpande, Proce.
Of National seminar on Advances and Processing, IIT Roorkee, 9/10 Nov. 2001, pp 216-221.