Wrenches - DiVal Safety Equipment

Transcription

Wrenches
Import Adjustable Wrenches
Domestic Adjustable
Wrench
Wright wrenches feel as good as they look. And they have a reserve of
strength for tough jobs. They feature the patented Wright Drive, which
provides more torque with less fastener damage, distributing stress evenly
over a larger contact area and away from the fastener corners. They’re
ideal for applications ranging from standard nuts and bolts to aerospace
fasteners. We also offer striking wrenches for extra-heavy-duty use.
Item #
* 914
* AC6
* AC8
* AC10
* AC12
* AC15
* AC124
Description
Wright 4” Adjustable Wrench Cobalt Finish- Domestic
Wright 6” Adjustable Wrench Cobalt Finish - Domestic
Crescent 24” Adjustable Wrench with Tapered Handle
Adjustable wrenches are made of stong
chrome vanadium steel. Legendary quality
means this wrench meets or exceeds ANSI
specifications. Rust resistant polished
chrome finish. Handy hang hole for wall
storage.
Item #
* 87366
* 87368
* 87470
* 87472
* 87482
Description
Adjustable Wrench, Import, 6”
Stubby Wrench Set
Set contains sizes 3/8 to 3/4, Stubby
wrench beam allows you access
into tight areas that a standard
combination will not. Surface
Drive® reduces fastener rounding.
Ratcheting box-end needs as little
as 5° to move fastener vs. 30° for
standard box end wrenches.
Combination Wrenches
Wright wrenches feel as good as they look. And they have a reserve of
strength for tough jobs. They feature the patented Wright Drive, which provides
more torque with less fastener damage, distributing stress evenly over a larger
contact area and away from the fastener corners. They’re ideal for applications
ranging from standard nuts and bolts to aerospace fasteners. 12 point.
Item #
1158
1159
1160W
1161
1162W
1163W
* 1166
1168
1171
1164
1167
1167A
1170
1172
1173
Item #
Description
9507
9520
KD Tools 7 Piece Stubby Combination Standard Wrench Set
KD Tools 10 Piece Stubby Combination Metric Wrench Set
Description
Combination Wrench Sets
Wright Cougar 1/4” X 1/4” 12 Point Combination Wrench
Wright Cougar 1-1/16” X 1-1/16” 12 Point Combination Wrench
Wright Cougar 1” X 1” 12 Point Combination Wrench
Full one year warranty on this
Craftsman tool. If this Craftsman tool
fails due to a defect in material or
workmanship within one year from the
date of purchase, Sears will repair it,
free of charge. Warranty service is
available by simply returning the tool
to the nearest Sears store or other
Craftsman outlet in the United States.
Item #
Description
944741
944742
Craftsman 12 Piece 12 Point Standard Combination Wrench Set
Craftsman 12 Piece 12 Point Metric Combination Wrench Set
Import Combination
Wrench Set
Ratchet Combination Wrench
Gear Wrench ratcheting box end wrenches
need as little as 5° of sweep to move a
fastener, and the thin head shank allows the
Gear Wrench into the tightest areas. Surface
Drive® box end virtually eliminates the
rounding of fasteners. Extremely strong, Gear
Wrench meets or exceeds ANSI, DIN and
Federal torque specifications. Handles long
bolts and threaded rods with ease and speed.
Gear Wrench speed wrench moves a fastener
with the speed and ease of a fine tooth ratchet.
Item #
Description
942407
Craftsman 7 Piece Metric Reversible Wrench Set
14 Piece Quality Combination Wrench
Set. Contains: 3/8”, 7/16”, 1/2”,
9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”,
5/16”, 1”, 1-1/16”, 1-1/8” & 1-1/4”.
Fully dropped forged, hardened &
tempered, polished & triple chrome
plated. Ming Shin USA (import).
Item #
Description
4028019
Olympia 9 Piece Standard Combination Wrench Set
Phone 716.874.9060 Toll Free 800.343.1354 Fax 716.874.4686 DiValSafety.com
433
Wrenches
Offset Box Wrenches
Box Wrenches
Straight pattern box wrenches with 6 or
12 point design.
Item #
Description
9381
9382
9383
9384
9386
9387
Wright Ratcheting Box Wrench 1/4” X 5/16” 6 Point
Ratcheting Box Wrench 3/4” X 7/8” 12 Point
Linemans Wrench
Forged from special bar steel and
heat-treated for long life. Each end
has two different size openings. Hole
is provided at larger end for turning-in
standard pole steps. Wrench is suited
for use on the heavy three-bolt guy
clamps on which clearance is limited.
Dark blue painted finish with small
end painted silver.
Item #
Description
3146B
Klein Lineman’s Wrench For Nema Hardware, Silver
Wright wrenches feature the patented
Wright Drive, which provides more
torque with less fastener damage,
distributing stress evenly over a larger
contact area and away from the fastener
corners. They’re ideal for applications
ranging from standard nuts and bolts to
aerospace fasteners.
Item #
Description
9424
9425
9426
9427
9428
Ratcheting Box Wrench Offset 1/4” X 5/16” 12 Point
Ratcheting Box Wrench
Ratcheting box wrench fits fargo
connectors which use 3/8”, 5/8” or 3/4”
hexagon head bolts.
Linemans Wrench
Forged from special bar steel and
heat-treated for long life. Each end
has two different size openings. A
hole is provided at the larger end for
turning standard pole steps. Wrench is
designed for use on heavy three-bolt guy
clamps on which clearance is limited.
Item #
* 3146
Description
Item #
* GP201
* GP203
* GP223
* GP2235
* GP221
Description
3/8” X 9/16” Ratcheting Box Wrench with Impact Insul. Handle
3/8” & 9/16” Ratcheting Box Wrench with Impact Insul. Handle
Klein Lineman’s Wrench For 5/8” Hardware, Dark Blue
Linemans Ratchet Wrench
This heavy-duty ratchet wrench
accepts 5/8” and 3/4” bolts. The
reversible ratchet is designed with
an open center to operate on long
threaded bolts.
Double head ratcheting box wrench
with chrome finish, 12 point. Allows
turning of fastener without removal
of wrench. A must for applications
where access is limited. Different
opening sizes in each end.
Item #
Description
Item #
Description
RB1820
9/16” X 5/8” Ratcheting Box Wrench
151T
Lineman’s Ratchet Wrench with 12” Open Gear Handle
Ratchet Wrench
Compressor access valve wrench.
Chrome plated. Has 1/4”, 3/8”, 3/16”,
and 5/16” square drive ratchets and
is specially designed for use on
compressors with access valves in
hard to reach places. Reversible
ratchets.
Straight pattern box wrench with 6 or
12 point design.
Item #
Description
Item #
Description
127C
Imperial Ratchet Wrench 1/4”, 3/8”, 3/16” & 5/16”
RB810DH
Ratcheting Box Wrench 1/4” X 5/16” 12 Point
434
YOUR DEPENDABLE SUPPLIER of Safety Products and Much, Much More!
Wrenches & Pliers
Pipe Wrench
Chain Wrench
The Ridgid heavy-duty straight pipe 6”
wrench is a sturdy, cast-iron housing and
I-beam handle with full floating forged hook
jaw, nonstick adjustment and replaceable
hook and heel jaws.
Item #
* 31000
* 31005
* 31010
31015
* 31020
* 21218
* 21224
Description
Ridgid 6” Heavy Duty Steel Pipe Wrench
A double jaw gives fast, ratchet-like action in
either direction. The heavy-duty model has
replaceable alloy steel jaws. The light-duty model
has a one-piece forged alloy steel handle and
jaw. Ideal for use in close quarters.
Item #
Description
31310R
31315
31325
Ridgid Lite Duty Chain Wrench Model C-12
Ridgid Heavy Duty Chain Wrench Model C-14
Ridgid Heavy Duty Chain Wrench Model C-24
Strap Wrench
Klein Tools S6H 6” Grip-It Strap Wrench (1-1/2” to 5”
capacity). Urethane-covered, high-strength belting, highleverage-torque application, can be ratcheted with one
hand. The completely adjustable strap wrench. Under
normal conditions, will not scratch, damage or deform
polished pipe and fittings, plastic pipe and fittings, oil
and water filters, glass pipe, PVC conduit, and polished
shafts. Also works on alternator belts, flywheels, and
propeller assemblies. Works in the tightest quarters.
Aluminum Pipe Wrench
Brand new Ridgid heavy duty pipe
wrench with 1-1/2” pipe capacity.
Weighs 1lb. Straight pipe wrench with
replaceable jaws and I-beam handle
for comfortable grip. Full-floating forged
hook jaw. Rugged, easy-spin, nonstick
adjustment nut and a lifetime warranty!
Item #
Description
31090
9450A
9452A
31110R
31115
9451A
Ridgid 10” Aluminum Pipe Wrench
Aluminum Offset Wrenches
Nearly 50% lighter than comparable
cast-iron models of the same size.
Features a jaw opening parallel to
the handle and a narrower hook jaw
head which provides easy entry into
tight spots.
Item #
Description
31120
31125
31130
Ridgid Aluminum Offset Pipe Wrench 14”
Pump Style Plumbers Pliers
Black epoxy powder coated.
Ergonomically designed, slip proof
handles. Self locking jaws will not slip
even on smooth surfaces. Firm grip on
tubular and sheet material, and square
and hex threads. High grip, induction
hardened jaw toothing.
Item #
* 70521
* 70523
* 70522
Item #
Description
S6H
S12H
S18H
Klein 6” Grip-It Strap Wrench
Telescoping Basin Wrench
Spring-loaded jaws of forged alloy steel
provide fast, one-hand ratcheting. Tension
plug holds head in any position up to 90°
angle. Telescopic shanks quickly adjust for
lengths from 10” to 17”.
Item #
Description
31175
Ridgid Telescoping Basin Wrench Model 1017 3/8”-1 1/4” Capacity
Tongue & Groove Pliers
Right angle teeth grip in all directions for maximum bite and minimum wear.
Patented undercut tongue and groove design assures no slip jaw action. Patented
reinforcing edge minimizes stress breakage. Patented PermaLock® fastener
eliminates nut and bolt failures. Distinctive CHANNELLOCK BLUE® comfort grips.
Item #
* 424
* 426
* 420
* 422CH
* 430
* 440CH
* 460
Description
Channellock 4-1/2” Tongue & Groove Pliers
Channellock 9-1/2” Tongue & Groove Pliers with V Jaw
Channellock 10” Tongue & Groove Pliers
Pump Pliers
Secure tongue and groove design
for non-slip grip even with heavy
pressure. Wide range of versatile jaw
positions.
Description
Rothenberger 7” Plumbers Plier Pump Style
Item #
Description
D50210
Klein 10” Pump Pliers
435
Wrenches & Pipe Threading
Heavy Duty Steel Pipe Wrench
Heavy Duty Steel Pipe Wrench
Length: 6”; capacity: 3/4”. The original
heavy-duty pipe wrench, known for its
serviceability. Replaceable jaws are
made of hardened alloy steel. Full
floating hook jaw gives instant grip
and release. Handy pipe scale and
large easy-to-spin adjusting nut allow
fast, one-hand setting to pipe size.
Comfort grip, malleable iron I-beam
handle.
Item #
* RW6
* RW8
* RW10
* RW12
* RW14
* RW18
* RW24
* RW36
Heavy-duty aluminum handle pipe
Wrench is nearly 40% lighter than
comparable cast-iron models so it is
easier to use for longer periods. Dual
heat-treated jaws and machinedsharp teeth.
Description
Reed 6” Heavy Duty Steel Pipe Wrench, Domestic
Item #
* ARW10
* ARW14
* ARW18
* ARW24
* ARW48
* ARW36
Description
Reed 10” Heavy Duty Aluminum Pipe Wrench, Domestic
Tristand
Chain Vise
Chain vises permit the holding of
irregular shapes and provide an
excellent cost-for-capacity value.
Reed chain vises are the fastest to
use: two turns to open or close. These
vises are the strongest available
and hardened tool steel jaws are
triple-faced for rotations instead of
replacements.
Item #
Description
CV2
CV6
Reed 1/8”-2-1/2” Chain Vise
Reed Chain Vise Pipe, Capacity 1/4”- 6”
Made in the USA with heavy gauge
steel, overlapping hinges and best
clamp system for sturdy, long lasting
life. Yoke style vise with exclusive
double-faced jaws and 1/8” to 2-1/2”
capacity. Weighs 39 lbs.
Item #
Description
R450PLUS
Reed Tristand 1/8-6” X 44”
Pipe Threader
Pipe Threader Set
The Ridgid No. 700 Portable Power
Drive is an electric-motor-driven,
heavy-duty power drive which
provides power for threading pipe,
conduit and rod (bolt stock). Ridgid
adapters, which require no machining,
are available to hold drop head die
heads and turn geared threaders and
other equipment.
Reed high-speed steel (HSS) R12+ Segmental Dies have cutting edges
manufactured in-house by precision CNC machinery. R12+ die sets replaceable
parts for Reed R12+ Dropheads, as well as the following Ridgid® brand
drophead threaders: 00-R, 111-R, 12-R, 0-R, 11-R, 30A and 31A threaders.
Reed R12+ Dropheads ship completely assembled and ready to use with HSS
segmental dies already in place. The unique design of the dies enables better
chip flow and easier cutting. R12+ Dropheads are can be used manually with
the ratchet ring and handle or with Reeds new 700PD Power Drive. The R12+
Dropheads can also be utilized in the Ridgid® brand 700 Power Drive. Reed
R12+ Drophead Threader Sets include complete dropheads in sizes from ½” to
2” NPT or NPSM, and a ratchet ring and handle. In addition, the Reed R12+
ratcheting ring** accepts all Ridgid® brand 12-R drop heads. **R12+ Ratchet
Ring and Handle can also be ordered separately by using Item Code #05638.
Item #
Description
Item #
Description
R12NPT4
Reed High Speed Pipe Threader Drop Head Die
41935
Ridgid Power Pipe Threader, Model 700
436
Pliers
6” Slip Joint Pliers
Heavy-duty design for industrial use. Cross
hatching on jaws grabs work tightly. Heavy
duty shear-type wire cutter. Precision made of
fine polished, high carbon drop forged steel.
Patented PermaLock® fastener eliminates nut
and bolt failures. CHANNELLOCK BLUE®
comfort grips.
Item #
* 546G
Forged steel construction double
dipped handle for user comfort Meets
or exceeds ANSI standards Rustresistant finish machined jaws for
better grip.
Description
Channellock 6” Slip Joint Plier
Linemans Side
Cutting Pliers
Heavy duty 2000 series pliers cut through ASCR,
screws, nails, & most hardened wire. Rivet is
closer to cutting edge for 46% greater cutting
& gripping power. Cross hatch knurled jaws.
Super tough cutting knives.
Item #
Description
D2016NE
D2018NE
Klein 6” Lineman’s Side Cutting Pliers
Klein 8-1/2” Lineman’s Side Cutting Pliers
Item #
Description
84107
Linemans Pliers
Exclusive Klein top forging, hot
riveting and heat treating processes
assure long lasting performance and
erfect alignment. Blue plastic dipped
handles, patented POP resealable
packaging design, innovative “2000
series” Klein tools Inc.
Linemans Pliers
Item #
Description
Our most popular side cutting pliers. Highleverage design. Rivet is closer to the cutting
edge for 46% greater cutting and gripping power
than other plier designs. Streamlined design
with sure-gripping, cross-hatched knurled jaws.
Plastic-dipped handles for comfort and ease of
identification. Not for protection against electrical
shock. Custom US-made tool steel.
Item #
Description
D2138NE
D2139NE
2139NE
Klein 8-1/2” Lineman’s Side Cutting Plier
Klein 9-1/4” Lineman’s Side Cutting Pliers, Dipped Handles
Klein 9” Lineman’s Side Cutting Plier
D2139NETH 9” Lineman’s Dipped Bolt Thread Holding Pliers
2000 Series High Leverage
Side Cutting Pliers
Crescent 9” Linemans Dipped
High Leverage Pliers
The Klein Tools 2000 Series 9 1/2
Inch High Leverage Side-Cutting
Pliers have super-tough cutting knives
that are specially designed and heattreated to cut bolts, nails, ACSR, and
most hardened wire without damage.
All “2000 SERIES” have combination
polished and black-oxide finish.
9” Ne-Type Side-Cut Lineman’s Pliers. Hot riveting
& heat treating processes assure long lasting
performance & perfect alignment. Blue plastic dipped
handles. Patented POP resealable packaging design.
High-leverage (HL) design provides 46% greater
cutting & gripping power than conventional plier.
Specially designed for rodman or iron worker with
hook bend on 1 handle & coil spring. Enables user to
pull rebar. Made in USA.
Item #
* 20509CV
20509CTH
Description
Item #
Description
Crescent 9” Lineman’s Dipped High Leverage Plier
Crescent 9” Lineman’s Dipped Thread Holding Pliers
HD20009NE
Klein 2000 Series Side Cutting Pliers High Leverage
8” Diagonal Cutting Pliers
7” Diagonal Cutting Pliers
Custom US-made tool steel. Induction
hardened cutting knives for long life. Hotriveted joint ensures smooth action and no
handle wobble. Short jaws and beveled cutting
edges permit close cutting of wire. Cuts
ACSR, screws, nails, and most hardened wire.
Plastic-dipped handles for comfort and ease
of identification. Journeyman pliers available.
State-of-the-art, dual-material handles, which
provide a better grip without sacrificing tool
strength or durability.
Item #
Description
D2288
Klein 8” Diagonal Cutting Plier
Induction hardened cutting knives for
long life. Hot-riveted joint ensures
smooth action and no handle wobble.
Short jaws and beveled cutting edges
permit close cutting of wire. Plasticdipped handles for comfort and ease
of identification. Heavy-duty tapered
nose design. One-inch jaws easily
reach into confined spaces.
Item #
* D2207
Description
Klein 7” Diagonal Cutting Plier with Tapered Nose
437
Cutting / Stripping
6” Standard Diagonal
Cutting Pliers
7” Diagonal Cutting Plier
Stanley diagonal cutting plier. Overall
length of 7-1/2”, jaw length of 1-1/4”,
jaw width of 1/2”, max jaw opening of
3/4”. Cutting edge straight. Jaw type
smooth. 2 tone bi-metal handle. Color
is yellow and black. Lap joint design
material. High carbon alloy steel.
Tapered nose and standard bevel
cutting knives. Red plastic-dipped
handles. Without coil spring. Overall
length is 6-1/8”.
Item #
Item #
Description
D2026
Klein 6” Standard Diagonal Cutting Pliers
* 84133
All Purpose Shears
Description
Stanley 84-108 7” Diagonal Cutting Pliers
Shears
High-leverage; shear-type design for
one-hand operation. Lightweight,
compact. Stripping notch for added
convenience. Cuts a variety of materials
including cable, sheet metal, steel
strapping, and bundling wire. Handle
cavity is designed to restore BX cable
to original shape after cutting. Plasticdipped handles for comfort.
Lightweight shears for cutting small soft cable,
insulation materials, electrical tape, cable ties, etc.
Handy for any electricians tool pouch. Blades
made of high carbon stainless steel. Serrated
blade edge for gripping. Comfortable molded nylon
handles. Length: 5.5 inches (138 mm). Length:
5.38 in (138.00 mm). Weight: 2.77 ounces (79.0g).
Item #
Description
Item #
Description
1104KL
Klein All Purpose Shears 7” Cable Cutter
ES1
Ripley Electrical Shears Light Weight Carbon Stainless Steel
Fiber Optic Kevlar Cutters
Designed to cut Kevlar® strength
members in fiber optic cables. Powerful
quick cutting action. Full serrated edge
for consistent, fast and clean cuts.
Lightweight and compact. Return spring
designed for precise repeated cuts.
Ergonomic handles with cushioned nonslip grips. Made of high carbon steel
specially treated for long life and trouble
free cuts. Made in the USA.
Item #
Description
FOKC
Ripley Fiber Optic Kevlar Cutter
Knipex Combination Shears
Precision ground, sharp hardened blades of
forged Vanadium steel for copper and aluminum
cables. Easy cutting with one hand operation.
No crushing or deformation of cables. Suitable
for universal use for cutting, dismantling and
stripping. Not suitable for steel wire and hard
drawn copper conductors.
Item #
Description
KN9505512
Knipex Combination Shears-Not Suitable For Metal Wire, 5-1/2”
Prosnip Straight Cut
Aviation Tin Snips
Prosnip 10” Tin Snip Cutters
Cut up to 22 gauge cold roll steel.
Features include plastisol dipped
handles, precision-ground edges to
ensure tight grip for cutting and 2” cut.
10” long.
Multi-purpose utility snips cut sheet
metal, vinyl, plastic and many other
materials. Features include pro-touch
grips, cut up to 18 gauge, 1-3/16”
cutting length and 10” long.
Item #
* 104
Item #
Description
010
Prosnip 10” Tin Snip Cutter
Wire Strippers
Wire Stripper-Cutter - solid and stranded wire. Strips
six standard wire sizes without nicking wire and the
scissors action of 1/2” (13 mm) wide cutter makes
clean cuts with little effort. It has a serrated nose
jaws to bend shape or pull wire; holes for looping wire
ends and is spring-loaded for self-opening action. It
also has comfortable plastic-covered handles.
Description
American Tool Prosnip Straight Cut Aviation Tin Snips
Wire Strippers
Wire Stripper/Cutter is a compact lightweight wirestripping and cutting tool with a narrow nose that fits
into tight places. It is made of hardened steel with
precision ground stripping holes. It features springloaded action for self-opening and has precision-ground stripping holes for easy
removal of insulation. The easy-to-read wire gauge markings on both sides are
for stripping in either direction. It has a black-oxide finish that resists corrosion
and color-coded handles: red indicates stranded wire yellow indicates solid wire.
The textured handles provide a firm comfortable grip.
Item #
Description
Item #
Description
1011
Klein Wire Stripper with Cutter, AWG 20-10, Metric 2.6-.8 mm
11045
Klein Wire Stripper AWG 18-10, Metric 4.0-.75 mm
438
Cutting / Stripping
Wire Stripper
High Leverage Cable Cutter
Item #
Description
Y1022
Wire Stripper AWG 22-10
Bolt Cutters
Drop forged, precision
ground alloy steel jaws.
Cuts soft, medium & hard
materials. Screw type
adjustments realign edges.
Fiberglass handles with
cushion grip rubber ends.
Item #
* 0090FC
* 0190FC
High-leverage design for exceptional
cutting capability. Precision, onehand shearing action. Cable-gripping
shear-type jaws. Perfect for working
in confined spaces. Can be carried
in most tool pouches. Hot-riveted
joint ensures smooth action and no
handle wobble. Beveled jaw tips
provide proper mating and shearing
action, which protects leading jaw
edges. Through-hardened (not casehardened) for longer-lasting cutting
surfaces. Custom, US-made tool steel.
Self-Adjusting Wire Stripper. 10-24
AWG wire. Automatically adjusts
to the diameter of the wire. Cutting
blades never touch the conductors;
damage to wire is virtually impossible.
Spring action returns wire stripper to
ready-to-use position. Plastic suregrip handles.
Item #
Description
* 63050
Klein High Leverage Cable Cutter
Ratchet Cable Cutter
Extra-thick blades, ground flat to
reduce potential for breakage. Ratchet
action for increased cutting power.
Two cutting actions - fast scissor
cutting for small cable; converts
automatically to ratchet mode. Antislip mechanism for positive ratchet
action. Rubber boot protects ratchet
mechanism.
Description
18-1/4” Bolt Cutter with Fiberglass Handles
24-1/2” Bolt Cutter with Fiberglass Handles
14” Compact Ratcheting
Soft Cable Cutter
Compact, lightweight cutter for confined
spaces. Ratchet-type jaws with shear-cut
blades grip and hold while moderate pumping
action cuts cable. Leaves no burrs or sharp
edges. Fiberglass handles with non-slip,
plastic grip. Has self-lubricating ratchet and
only 6 moving parts. MCM capacity does not
include cable insulation and MCM capacity
equates to conductor size only. 10 per case.
Item #
Description
6990FS
H.K. Porter 14” Compact Ratcheting Soft Cable Cutter
Item #
Description
757
Greenlee Ratchet Cable Cutter 1.18” Opening, 29-1/4” Length
Ratchet Type Guy Strand Cutter
H.K. Porter 28” ratchet type guy
strand cutter, 1/2” capacity. Notched
shear cut blades hold material firmly
in place. Ratchet and chain produce
easy, progressive cuts. Cuts EHS
guy strand, mild steel rods and bolts,
and similar materials. Makes clean,
square cuts with minimal distortion.
Increased mechanical advantage over
manual cutters.
Ratchet Bolt Cutter
H.K. Porter 27 1/2” ratchet type, soft cable
cutter, 2” capacity. Jaw keeper prevents jaws
from spreading while under heavy load. Cuts
copper and aluminum communications power
cable up to 2”. Improved heavy duty jaw design,
built for tough conditions. Ratchet provides
up to 5 times the mechanical advantage over
manual cutters. Cuts all types of other copper
and aluminum cables up to 2500MCM.
Item #
Description
8690FSK
H.K. Porter Ratchet Bolt Cutter with Keeper, Soft Cable
Item #
* 8690CK
Description
H.K. Porter Ratchet Type Guy Strand Cutter
Ratcheting Cable Cutter
Cleanly cuts copper up to 400 MCM, as well
as aluminum and multi-conductor cables
up to 600 MCM. Unique ratchet action
holds cable tight and allows rapid, straight
cuts with minimum effort. Hold-open spring
speeds cutting action. Quick-release lever
opens blade at anytime during operation.
Large, finger-formed handles have limit
guards and plastic covering for comfort.
Compact, lightweight tool can be locked
in closed position for pouch carrying. Not
designed for cutting steel or ACSR.
Cable Cutter
32 through 500 MCM cable cutter 13”.
Item #
Description
Item #
Description
763
32 Through 500 Mcm Cable Cutter 13”
* 63060
Ratcheting Cable Cutter
439
Cutting / Stripping
Imperial Tube Cutter
Pro-Mini Tube Cutter
This big capacity, small size tube cutter is
designed for use in tight quarters where other
cutters won’t fit. The enclosed feed screw
minimizes contamination assuring continued
smooth operation. Corrosion resistant stainless
steel rollers allow for easier cutter engagement on
tubing. Includes 1 general purpose cutting wheel.
Tube Cutter - Tube OD 1/8” to 1-1/8”,
overall length 4-15/16”, standard with
reamer and spare wheel.
Item #
Item #
Description
TC1000
Imperial Tube Cutter 1/8” - 1 1/8” Od
Quick Release Tube Cutter
Reed Quick Release tubing cutters are 8”
long, weigh 1.2 lbs & have a 1/4” - 2 5/8”
O.D. capacity. They are the best tracking,
easiest cutting tubing cutters available.
Cut copper, aluminum, light wall steel
& stainless steel tubing. With special
wheels, it will cut a variety of plastic pipe
& tubing. This model also features a
retractable reamer & a ball detent wheel
pin which makes wheel change easy.
Item #
Description
TC2Q
Reed Quick Release Tube Cutter For 1/4”- 2-5/8” Capacity
Steel Pipe Cutters
Strong malleable iron frames and wide
rollers insure square cuts. Thinnest
wheels of highest quality tool steel
make cutting easier and faster.
Sharper wheels allow shorter handles
for work in smaller spaces.
Item #
Description
21REED
Reed 1 Wheel Steel Pipe Cutter
Heavy Duty Pipe Cutters
Item #
* 32820
Description
Fast, clean pipe cutting by hand or
power. Extra-long shank protects
adjustment threads, while an extralarge handle is provided for quick,
easy adjustment. Can be converted
to 3-wheel cutter by replacing rollers
with cutter wheel, or pipe cutter can
be ordered as 3-wheel model for use
in areas where a complete turn is not
possible. Will cut 1/8” to 2” pipe.
Ridgid 2A 1/8”- 2” Pipe Cutter
* TC2050
Description
Imperial “ Pro-Mini “ 3/16 - 7/8” Tube Cutter
Hinged Cutters
Four wheels cut steel, stainless steel, cast and ductile iron
with only 90° to 110° handle swing. Only 4” clearance
required around pipe. Strong guide fingers insure perfect
wheel alignment for square cuts. A closed 360° frame
forces all energy into cutting the pipe for maximum
efficiency. There is no shower of sparks in this cold cut.
This is the only hinged cutter that tracks every time and the
only one recommended for ductile iron, steel, and stainless
steel to Schedule 100. This tool is a Reed invention.
NOTE: S= includes cutter wheels for steel; I= includes
cutter wheels for cast and ductile iron; X= includes cutter
wheels for schedule 80 steel; XX= for schedule 100 steel. Wheels for same size
cutters are interchangeable. Recommend only Reed cutter wheels be used with
these hinged cutters. Reed wheels are made from high shock-resistant tool steel
on computerized (CNC) machines and then precisely heat treated. This allows
for a thinner profile yet stronger blade.
Item #
Description
* HI6
Reed Hinged 4 Cutter Wheel 6” - 8” Capacity For H8S Cutter
03506REED Reed Replacement Cutter Wheels For The H6I, Cuts Ss, 4 per box
Quick Release Cutting Tool
Best tracking, easiest cutting tubing cutters available. Cut
copper, aluminum, light wall steel, and stainless steel
tubing. With special wheels it will cut a wide variety of
plastic pipe and tubing.
Item #
Description
03660R
03416
Reed Replacement Cutter Wheel For 03416 Tubing Cutter
Reed Quick Release Tubing Cutter 1/4”- 1-5/8” O.D.
4 Wheel Pipe Cutter
Designed for work in areas where a complete
turn is impossible. No. 42-A has a short handle
for use in areas where only a 130° turn can be
made. Equipped with four heavy-duty wheels.
Will cut 3/4” to 2” pipe.
Item #
Description
32870
Ridgid 42A 4 Wheel Pipe Cutter
Scissor Shears For
Plastic Tubing
Ratchet Shears
Reed ratchet shears are 8.3” long, 1.7” capacity &
weigh .8lbs. They are ideal for cutting PVC, PE,
PP, PEX & ABS pipe. This one hand model offers
a 7 step ratchet mechanism for best mechanical
advantage & smoothest operation. The blades can be
easily sharpened. Broader base & 7 step ratcheting
mechanism means square cuts are easily attained with
minimal clearance.
Reed scissor shears are 8.3” long, have a
1/3” capacity & weigh .3 lb. These scissor
shears squeeze together for fast cutting
of thin wall & small diameter PE, rubber or
nylon tubing. Rotate shears around tubing
while squeezing handles together for best
cut. The blades are Teflon coated.
Item #
Description
Item #
Description
* SC1
Reed Ratchet Shears, 8.3” Over All Length
RS1
Reed Ratchet Shears, 8.3” Over All Length
440
Screwdivers
Deluxe Slotted
Screwdrivers
Deluxe Phillips Screwdrivers
Highest-quality tempered steel. Carefully heat-treated
for maximum strength. Shafts have integral flanges
that provide an extra-strong, torque-proof anchor in
the handle. Strong, durable black tips are forged
& precision ground with square edges to fit screw
openings securely. Cushion-grip handle allows for
greater torque & comfort. Meets or exceeds applicable
ASME/ANSI specifications.
Cushion-Grip handles for greater torque and
comfort. Patented Tip-Indent quickly identifies
the type of screwdriver and tip orientation. Built
to handle the tough jobs with ease. Reinforced
shank for hard use.
Item #
* 6024KL
* 6026KL
* 6028
* 60212
Description
Klein 1/4” X 4” Round Shank Cushion Grip Screwdriver
Klein 3/8” X 12” Round Shank Cabinet Tip Screwdriver
Item #
Description
6034
6036
6037
60310K
Klein #2 Phillips Screwdriver, 8-5/16 Length
Klein #3 Phillips Tip Screwdriver, 6” Length
Klein #2 Phillips Screwdriver, 7” X 11-5/16” Length
Klein #2 Deluxe Phillips Screwdriver, 14-5/16” Length
Deluxe Cabinet
Screwdrivers
Coated Cabinet
Screwdrivers
Plastic coating for circuit protection
only. Not insulated. Narrow cabinettip permits blades access where
space is limited. Features include
cushion grip handle, labeled tip on top
to identify screwdriver, and precisionmachined tip for exact fit.
3/16” Cabinet-tip screwdriver - 3”
round-shank. Small-diameter shank
for use in recessed holes or tight
places. Well-suited for electrical and
telecommunications work.
Item #
* 6013
* 6016
* 6018
* 60110
Description
Item #
Description
6204KL
6208K
6206K
Klein 1/4” X 3 3/4” Round Shank Cabinet-Tip Screwdriver, 8”
Klein Coated Tip Screwdriver 3/8” X 8” X 13-7/16”
Klein 6” Flat Head, Coated, Non-Insulated Screwdriver
5 in 1 Screwdrivers
Screw Holding Screwdrivers
Cushion-Grip handle allows
for greater torque and comfort.
Patented Tip-Ident® quickly
identifies the type of screwdriver and
screwdriver tip orientation. Premium
chrome plated for smooth feel and corrosion resistance. Internal flanges inside
handle provide solid, twist-resistant blade anchor. Special heat-treated shafts.
Precision-machined tip for exact fit. Meets or exceeds applicable ASME / ANSI
specifications. End of handle is marked to quickly identify tool. Features 5/16”
nut driver, #1 and #2 Phillips, 9/32” slotted and 3/16” slotted.
Split-blade screw-holding driver
wedges into screw slot. Positive
gripping action holds, starts, and
drives slotted screws in awkward,
hard-to-reach places. Not designed
for torquing or tightening. Blade
thickness of .043” expanding to .085”.
Item #
Item #
Description
3247612
Klein 5 in 1 Screwdriver / Nut Driver with Cushion Handle
* K34
* K44
Deluxe Screwdriver Set
Description
Klein 8” X 3/16” Slotted Screw- Holding Screwdriver
Klein 8” X 5/16” Slotted Screw-Holding Screwdriver
Conduit Reamer
Hooded-blade design keeps tip from slipping out of
screws, especially when tightening hard-to-reach
conduit fittings. Thicker hood is designed for rugged
use. Reams and smoothes 1/2” (13 mm), 3/4” (19 mm),
and 1” (25 mm) thin-wall conduit ends to protect wire
and permit correct installation of fittings. Reams both
the inside and outside of the conduit at the same time.
Longer cushion-grip handle provides comfort and more
torque for reaming. Replaceable reaming blade is now
held in place with a 1/16” hex socket set screw.
General-purpose selection of the
most frequently used screwdrivers.
Includes: three cabinet-tip, two Phillipstip and two keystone-tip styles.
Item #
Description
Item #
Description
85076
Klein 7 Piece Cushion-Grip Screwdriver Set
85188
Klein Cinduit Fitting & Reaming Screwdriver 3/8” X 3” Shank
441
Screwdrivers
Slotted Screwdrivers
Phillips Screwdriver
Xcelite screwdrivers are vibratory
polished (not chrome plated) and the
tip is vapor blasted for better grip!
Xcelite screwdrivers are vibratory polished
(not chrome plated) and the tip is vapor
blasted for better grip! Sizes listed below.
Item #
* X100
* X101
* X102
* X103
* X108
Description
Xcelite 1/8” X 2” #0 Point Phillips Screwdriver,
Xcelite 3/16” X 3” # 1 Point Phillips Screwdriver
Screwdriver Set
Item #
Slotted blades make use of serrations to enhance
fastener contact and resistance to slipping.
Color-coded virgin acetate handles for impressive
impact and chemical resistance. Blade tips are
precision ground for accurate, tight fit with the
fastener. Color coded red flutes for slotted/clear
for Phillips. Serrated slotted screwdriver blades
help resist slipping. Heat-treated alloy steel
blades for maximum strength and durability.
Large handles with fluted design for sure grip
and turning power. Advanced plating process
enhances corrosion resistance. Phillips: P0 x
2-1/2”, P1 x 3”, P2 x 4”, P2 x 6”. Slotted: 1/8 x 2
square inches, 1/8 x 4 square inches, 3/16 x 6
Description square inches, 1/4 x 4 square inches.
947136
Craftsman 8 Piece Screwdriver Set 4 Slotted & 4 Phillips
Item #
* R144
* R146
* R148X
* R181
* R182
* R183
* R184
* R186
* R188
* R1410
* R1810
* R3163
* R3164
* R3166
* R3168
* R31610
Description
Xcelite 1/4” X 4” Amber Handle Regular Round Blade Screwdriver
Xcelite 1/4” X 8” Round Blade Flat Head Screwdriver, Amber
Xcelite 1/8” X 2” Round Shank Slotted Pocket Screwdriver
Xcelite 1/8” X 3” Red Handle Round Blade Pocket Screwdriver
Xcelite 1/8” X 4” Round Shank Slotted Screwdriver
Xcelite 3/16”X 10” Amber Handle Regular Round Blade Screwdriver
Square Shank Screwdrivers
Square shank screwdriver with
chrome plated blades. Constructed
from chrome vanadium steel.
Precision ground and sand blasted
tips, size: 3/8” x 12”.
Stubby Screwdrivers
Economical short screwdriver
for small areas.
Item #
* 76102
76101
* 9122
Description
Wright #2 1 1/2” Stubby Phillip Screwdriver, OAL 3 7/16”
Pratt #1 1 1/2” Stubby Phillip Screwdriver, OAL 3 7/16”
Wright 1/4” X 4” Round Shank Slotted Stubby Screwdriver
Item #
* S146
* S148
* S3166
* S5164
* S5166
* S5168
2 piece set includes 1 slotted pocket
screwdriver and 1 phillips pocket
screwdriver. Pocket clips included.
Item #
* R181
* 5432
66103
Item #
Description
DP2
DP3
Wright Phillips Tip #2 X 4” Blade, OAL 8 1/4” Screwdriver
Wright Phillips Tip #3 X 6” Blade, OAL 10 7/8” Screwdriver
Xcelite 1/4”X 6” Square Shank Slotted Screwdriver
5/16” X 8” Square Shank Slotted Screwdriver
Pocket Screwdrivers
Philips Screwdriver
Chrome vanadium steel shank.
Chrome-plated, translucent
handle, lifetime warranty.
Description
Description
Xcelite 1/8” X 2” Round Shank Slotted Pocket Screwdriver
Crescent 1/8” Round Shank Pocket Screwdriver with Clip,Flat
Stanley 3/32” X 3” 100 Plus Slotted Pocket Screwdriver
Stanley Screwdrivers
Full size vinyl grips. Boron steel blade
with precision ground tips. Chrome
plated for corrosion resistance.
Screw Starter
Item #
Description
SSN5A
SSN9A
Starter Screw 6”
Starter Screw 9”
442
These double ended screw starters take
the place of two separate screw starters
with the same easy twist. Choose either
a 9” flexible nylon handle or a 6 1/4”
aluminum handle each with Phillips and
standard slotted tips.
Item #
64846
60001
* 60006
* 64466
64641
64642
Description
Stanley 1/8” Thin Slotted Screwdriver
Stanley 3/16” X 4” #1 Point Fluted Phillip Tip Screwdriver
Stanley 1/4” X 6” Standard Fluted/Blade/Tip Screwdriver
Stanley #2 Point Phillips Tip Screwdriver
Stanley 1/4” X 6 5/8” Standard Slotted Screwdriver
Stanley 1/4” X 7 5/8” Standard Slotted Screwdriver w/4” Blade
Nut Drivers & Hex Keys
Nut Driver Set
7 piece cushion grip nut driver set.
Craftsman innovation! Set features 20%
larger handles that provide more torque
than standard nut drivers. Chemical
resistant cusion grip handles help
minimize slippage and improve leverage.
Ideal for reaching fasteners in limited
clearence areas. Color coded with sizes
stamped at the end of each handle for
easy identification. Metric sizes include
5mm thru 11mm. Standard sizes include
3/16”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”.
Crafted in tough alloy steel. Tools measure
6-1/2” long and weigh 3.0 lbs.
Nut Driver Set
Full hollow shafts facilitate work on stacked
circuit boards or other long bolt applications.
Internal flanges provide solid, twist-resistant shaft
anchor. Premium chrome plated for smooth
feel and corrosion resistance. Meets or exceeds
applicable ASME / ANSI specifications. Handle
end is also color coded for easy identification.
Cushion-Grip handle allows for greater torque
and comfort. Patented Tip-Indent quickly
identifies nut driver and size. Set contains:
3/16”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, and 1/2”.
Item #
Description
* 631KL
Klein 7 Piece Cushion Grip Nut Driver Set 3” Shank 3/16”- 1/2”
Nut Drivers
Item #
Description
942200
942190
Craftsman 7 Piece Metric Cushion Grip Nut Driver Set
Craftsman 7 Piece Standard Cushion Grip Nut Driver Set
Contractor grade hollow shaft nut
drivers. Economical yet durable.
Nut Drivers
Smooth Comfordome handle fit the palm of the
hand comfortably. Handles are color-coded for
easy identification. Hollow shafts facilitate work
on stacked circuit boards or other long bolt applications. Chrome-plated shaft
helps prevent corrosion. Internal flanges provide solid, twist-resistant shaft
anchor. Meets or exceeds applicable ASME/ANSI specifications.
Item #
Item #
Description
6401/2
6403/8
Nut Driver, Cushion Grip, 3” Shaft, 1/2” Hex
Nut Driver, Cushion Grip, 3” Shaft, 3/8” Hex
Nut Drivers
* 42810
* 42830
* 42850
* 42860
* 42870
* 42880
Precision-machined, cold-drawn, casehardened socket with bright finish. Molded
firm grip.
Item #
Description
* HS11
* HS7
* HS8
* HS9
* HS18
Xcelite Hollow Shaft Nut Driver with Green Handle, 5/16” X 3 1/8”
Xcelite Hollow Shaft Nut Driver with Brown Handle, 7/32” X 3 1/8”
Xcelite Hollow Shaft Nut Driver with Red Handle, 1/4” X 3 1/8”
Xcelite Hollow Shaft Nut Driver with Orange Handle 9/32” X 3 1/8”
Xcelite Hollow Shaft Nut Driver with Orange Handle, 9/16”X 3 1/8”
Description
3/16” Hollow Shaft Nut Driver
Adjustable Pin Vise
Adjustable pin vise has a capacity of 0.040” to 0.250”.
It can be used for electronic assembling, tool making,
model making & hobbies. This vise holds small drills,
burrs, wires, files, reamers & other small tools. It
features a 3-jaw hardened steel keyless chuck & sturdy
plastic handle & an overall length of 6 7/8” with a body
diameter of 1”.
Item #
Description
93VISE
Adjustable Pin Vise
Folding Hex Key Set
Hex Key Set
Handy sets fit your pocket or tool box
easily and help eliminate losing keys.
Heat-treated alloy steel holder serves
as a handle, two key positions for extra
leverage.
Item #
* 70579
* 70581
Description
Klein Folding Hex Key, 5 Keys
Klein Folding Hex Key Set, 8 Keys, 1-1/2” - 2-3/8”
Armstrong wrench hex head 9 piece
key set.
Item #
* 66865
Description
Armstrong Wrench Hex Head 9 Piece Key Set
443
Hex Keys
Metric L-Key Hex Key Set
Allen Hex Key Set
7 piece Metric Short Arm Hex-L Key set.
Includes: 1.5 mm, 2 mm, 2.5 mm, 3 mm,
4 mm, 5 mm and 6 mm. Set comes in
compact plastic holder that firmly retains
each key in size marked holes with our
unique friction ring design. Made from
8650 chrome nickel alloy steel drawn to a
tolerance of plus .000”/Minus .001”. Hex
corners are sharp and clean. Made In
USA.
5 Piece fold-a-ball set. Includes 3/16”, 7/32”, 1/4”, 5/16”, & 3/8”
5.3”. Large handle length. Produced from 8650 chrome nickel alloy
steel. Allows access to hard to reach fasteners. Turns 360° at up
to a 25° angle. Heat treated for maximum strength, resistant to rust.
Item #
Description
88051
Allen Hex Key Set
Balldriver T Handle Hex Tool Set
Item #
Description
9V98040
L-Key Hex Key Set - Metric
Metric T Handle
Balldriver Set
The T-Handle is the best selection for applications where
maximum torque is needed for insertion/extraction of
screws. Compared to a screwdriver handle, less effort is
needed to generate comparable torque. The T-Handle
is capable of producing a flywheel affect for “spinning”
fasteners in or out of low friction materials. A common
misconception is that a shorter blade can generate more
torque than a longer blade. In reality, blade length has no
affect on torque.
Item #
Description
13189
Bondhus 8 Piece Metric T Handle Balldriver Set 2 mm - 10 mm
The slight downward angle of the handles is ergonomically superior to a straight
T-Handle for comfort and functionality. Cushioned feel reduces fatigue. Handle
size matches blade torque to prevent over-torquing. The mass of a Bondhus
T-Handle enables a flywheel affect, allowing screws to be quickly spun in or out.
Item #
Description
13254
13256
Bondhus Balldriver T-Handle Hex Tool Set 2.5 mm
Bondhus Balldriver T-Handle Hex Tool Set 3.0 mm
Fargo Double Allen
Wrench Connector
Allen Racheting Wrench
Allen ratcheting wrench with impact
insulated handle.
Fargo Double Allen Wrench
Connector.
Item #
* GP240
444
Item #
Description
Fargo Double Allen 3/8” X 5/16” Wrench Connector
* GP209
* GP2093
Description
3/8” Allen Ratcheting Wrench with Impact Insulated Handle
5/16” Allen Ratcheting Wrench with Impact Insulated Handle
Clamps & Locking Pliers
Vise Grip 9” Long
Nose Locking Pliers
Vise Grip Locking C-Clamps
Convenient wire cutter cuts up to a 1/4”
bolt. Long, straight nose allows for
use in narrow spaces not reachable by
curved or straight jaws. Use to clamp
or tighten bolts or to extract items
in hard to reach places. Max jaw
opening: 2-7/8”.
Quick, easy locking and release
action. Leveling swivel pads protect
delicate material. Guarded release
helps keep work fast and safe. Full
lifetime warranty.
Item #
Description
6LN
9LN
Vise Grip 6” Long Nose Locking Pliers
Vise Grip 9” Long Nose Locking Pliers
Quick-Grip One-Handed
Bar Clamp/Spreader
Item #
Description
6R
11R
18R
24R
Vice Grip 6” Locking C-Clamps with Regular Tips
Vise Grip 11” Locking C-Clamps with Regular Tips
Quick Change, 6” Bar Clamp/Spreader. Multi
position jaws can be positioned anywhere on
the bar making even the most challenging
clamping or spreading task a snap. Clamping
capacity 6”. Spreading capacity 7-1/2” To 145/8”. Non-marring Pads.
Vise Grip 10” Locking Pliers
Fast Release is 2x easier to open,
has a no-pinch release, and offers
more finger room. Curved jaw puts
tremendous pressure on four points of
any style nut or bolt head. The no-slip
ProTouch grip provide comfort and
leverage while reducing vibrations
and hand fatigue. Ideal for tightening,
clamping, twisting and turning. Turn
screw to adjust pressure and fit
work. Stays adjusted for repetitive
use. Constructed of high-grade
heat-treated alloy steel for maximum
toughness and durability. Hardened
teeth are designed to grip from any
angle.
Item #
10LW
10R
10WR
* 5WR
* 7WR
8R
Item #
Description
506QC
512QC
518QC
524QC
Irwin Quick-Grip 6” One-Handed Bar Clamp/Spreader
Record C-Clamp
Drop-forged, regular-duty with
extra deep-throat. Spatter resistant
copper plated spindle. Exceptional
value high-visibility welding clamps.
Opening: 12”. Throat depth: 5-3/4”,
Spindle Diameter: 7/8”, Clamping
Force: 9,500 lbs.
Description
Vise Grip 10” Locking Wrench with Wire Cutter
Vise Grip 10” Straight Jaw Locking Pliers
Vise Grip 10” Curved Jaw Locking Pliers with Wire Cutter
Vise Grip 5” Curved Jaw Locking Pliers with Wire Cutter
Vise Grip 7” Protouch Curved Jaw Locking Plier with Wirecutter
Vise Grip 8” Locking Sheet Metal Pliers
Item #
Description
1206
1208
12012
American Tools Record 6” C-Clamp
445
Measuring Tools
Fiberglass
Tape Measure
Open Reel Fiberglass
Tape Measure
Heavy-duty construction and high
impact resistant ABS body. Numbers
and graduations printed in black.
Fiberglass tape will not rot, corrode
or distort. Yellow case with two color
tape, white side of tape has inch
markings, yellow side has engineering
scale. Comfortable rubber hand grip.
Item #
6799
6820
* 6830
Line does not collect dirt in case.
Lightweight open reel is easy to
handle and rewind. 13 mm X 50 m.
Item #
* HY1750CME
HY1760CME
Description
Lufkin Fiberglass Tape Measure 1/2” X 164’
Lufkin 1/2” X 200’ Measuring Tape & Metric
Open Reel Fiberglass
Tape Measure
Description
Empire Level 100’ Open Reel Fiberglass Tape Measure
Klein 1/2”x 150’ open reel fiberglass tape measure with
moisture proof coating of polyvinyl chloride assures durability
& protects against oil or chemicals. Black figures on white
background are easy to read. Metal parts are nickel plated for
protection against rust. End hooks are permanently attached to
a reinforced strip. Case & reel are ruggedly built yet lightweight
& comfortable to use. Line is graduated in feet & inches to
8ths. Graduations & numbers are black, foot markings are red.
Closed Reel Fiberglass
Tape Measure
Klein 1/2” x 50’ closed reel fiberglass
tape measure.
Item #
Description
946150
Klein 1/2” X 150’ Open Reel Fiberglass Tape Measure
Hiviz Orange Open Reel
Fiberglass Tape
Item #
Description
94650
Klein 1/2” X 50’ Closed Reel Fiberglass Tape Measure
Lufkin Hi-Viz Orange Linear Fiberglass Tape 1/2” x 50’.
Line does not collect dirt in case. Lightweight open reel is
easy to handle and rewind. Orange case.
Measuring Wheel
Item #
All steel construction. 5-digit counter.
Records up to 100,000 feet or
meters with convenient rest knob
(dual counters available). 4-foot
circumference wheel for easier
measurements on rough terrain.
Wheel stand & wheel brake.
Item #
Description
400D
400RO
Rolatape Heavy Duty Dual Counter Measuring Wheel
Rolatape All Purpose Measuring Tape In Feet- 4’ Wheel
Folding Wood Ruler
* 1703
* 1706
* 1709
* 066F
1066D
1066DM
446
Lufkin 1/2”X 50’ Hi-Viz Orange Open Reel Fiberglass Tape
Folding Rulers
Precision made of flexible heavy-duty
fiberglass with embedded, easy-to-read
boldface figures and graduations with
red 16” stud marks and positive locking
joints. No. 1602 is graduated on one side
in millimeters with red markings every
10 centimeters. Reverse side reads in
inches.
Item #
Description
619
73370
Ridgid 6’ Folding Wood Ruler, Outside Reading
Ridgid 6’ Folding Fiberglass Ruler, Inside Flat Reading
066F has inside markings; numbering
begins on inside of rule so the
measurement lies close to the work.
Marked on both sides and both edges,
graduated to 1/16ths both edges. 16”
stud centers marked in red. Clear
abrasive-resistant coating protects
markings.
Item #
Description
Carpenter Squares
12” x 16” square, 1/16” thick.
Permanently stamped numbers and
1/8” graduations. Durable protective
epoxy finish to prevent rust.
Description
Lufkin 5/8” X 6’ Folding Wood Ruler, Inside Markings
Lufkin 5/8” X 6’ Engineers Wood Folding Ruler, Red End 2.3 lb
Lufkin 5/8” X 2M Engineers Wood Folding Ruler, Red End 2.3 lb
Item #
Description
1010EMP
Empire 12” X 16” Steel Carpenter Square, 10 per box
Measuring Tools
Tape Measure
This tape measures 1” X 25’ and
comes with the DiVal logo, also
features a sturdy rubber grip.
Item #
Powerlock Tape Measure
Mylar polyester film coating which
extends blade life up to ten times longer.
Heat treated spring for longer life.
Positive blade lock will not creep while
taking measurements. Graduated in
16ths of an inch. Belt clip on back of
case.
Item #
Description
33212
33215
33158
Stanley Powerlock II Tape Measure, 12’
Stanley Powerlock Tape Measure, English and Metric, 3/4” X 12’
Stanley Powerlock Tape Measure, Metallic 5M / 16’ X 3/4”
Description
25’ Power Grip Tape Measure
* 775025DIVAL 1” X 25’ Tape Measure with DiVal Logo
A proven winner, Power Grip Tapes feature
a durable ABS case with a rubber grip that
conforms to the hand for better control and
comfort. The steel blade has a tough acrylic
coating to protect the blade from rust and
corrosion. Available in 16’, 25’, 30’ and 35’
lengths. Features standard markings on
blade.
Leverlock Tape Rule
Power return tape rule with automatic bottom lock for easy
operation. High visibility yellow color case makes it easy
to find. Special Tru-Zero hook allows use of nail as pivot to
draw circles and arcs. Multiple riveted hook for longer life.
Polymer coated blade for longer life. Blade wear guard.
Item #
Description
7525
Empire 25’ Power Grip Steel Tape Measure
10’ Tape Measure
Item #
Description
30982
30825
Stanley 1/2” X 12’ Leverlock Tape Rule
Stanley 1/2” X 25’ Leverlock Tape Rule
Lufkin 1/2” x 10’ series 2000 power return tape measure
with A1 blade style. This measure comes with a lightweight
chrome finished case designed to fit perfectly in the hand.
It fits easily into most tape holsters. The blade is bright
yellow and has clear easy to read numerals. Toggle lock
positioned for convenient operation, holds blade securely.
Cushioned blade return, removable belt clip.
25’ Tape Measure
Item #
* Y210
High impact resistant ABS body. Bold
clear numbers on bright yellow tape,
rigid blade with protective acrylic
coating. Durable steel belt clip and
dependable slide lock, 1” x 25’.
Item #
Description
6527
Empire Tape Measure,Rigid Blade with Acry. Coat, Yellow, 1” X 25’
12’ Orange Tape Measure
Hi-Viz® orange case - easy to find on
the job. Case designed to fit perfectly
in the hand. Lightweight, high
strength case, fits easily into most
tape holsters. Bright yellow blade has
clear easy-to-read numerals. Toggle
lock is positioned for convenient
operation, holds the blade securely
in any position. Cushioned blade
return. Removable belt clip. All shelf
pack power tapes are carded, blade
style: A1.
Description
Lufkin 1/2” X 10’ Series 2000 Tape Measure
25’ Orange Tape Measure
Hi-Viz ® case - easy to find on the job. Lightweight,
high strength case designed to fit perfectly in the hand.
Also fits easily into most tape holsters. Bright yellow
blade has clear easy-to-read numerals. Toggle lock is
positioned for convenient operation and holds the blade
securely in any position. Virtually unbreakable quad
hook; four rivets for extra strength with cushioned blade
return. Removable belt clip, blade style: A5.
Item #
Description
HV1425
Lufkin 1” X 25’ Pro Series 1000 Hi-Vis Orange Tape Measure
Tough Tape 1” X 25’
These new Tough Tapes are high quality, valuepriced tape measures with high visibility, impactresistant rugged cases. They are all fitted with an
ergonomic over-molded soft grip. Smooth blade
lock holds the blade firmly in place. The new wide
blade offers extra blade stand-out.
Item #
Description
Item #
Description
HV1012
Lufkin 1/2” X 12’ High Viz Orange Tape Measure
64183
Starrett 1” X 25’ Tough Tape Measure
447
Measuring Tools
Tru-Lok® Tapes
33’ Tru-Lok® Tape Measure
Industrial quality tape measure with
heavy-duty English/Metric blade. A
basic measuring tape style used
by professionals and homeowners.
Named Tru-Lok® because the blade
positively locks in position until the
cam-activated lock button is released.
Comes in rugged, impact resistant
high-visibility yellow case. Blade
measures 1” X 33’.
A basic measuring tape style
used by professionals and
homeowners. Named Tru-Lok®
because the blade positively
locks in position until the
cam-activated lock button is
released. A new, heavy-duty
tape line is furnished standard
(except where noted.) Ideal for
demanding conditions.
Item #
Description
Y110ME12
Starrett Tru-Lok English and Metric Tape Measure, 1” X 33’
Robosquare
Item #
Description
CH1212
CH3425
65383
Starrett 1/2” X 12’ Tru-Lok Charcoal Tape Measure
Starrett 3/4” X 25’ Tru-Lok Charcoal Tape Measure
Starrett 1” X 30’ Tru-Lok Tape Measure (S1 Grad Style), Yellow
Handy tool is a 3-beam, level and
square laser all in one! Provides three
90° beams accurate to 1/4” at 75’.
Features magnetic base and straps.
Also mounts to a 1/4” x 20 threaded
tripod (not included). V-groove aligns
unit with pipes and through-holes
accept standard screws
Stud Finder
Item #
Description
TOORT36103 Robosquare 3-Beam Level and Square Level
Self Leveling Rotating Laser
This fast, simple leveling tool is a
great value. NRL200 is equipped
with a high-performance compensator
that offers speedy, accurate leveling.
For indoor or outdoor leveling
applications, just set up within a wide
range of +/- 4°, and the compensator
takes over leveling, letting you get
to work. There is an out-of-levelingrange warning (audio) signal to
prevent wrong measurements. Indoor
features include: wide sweep, narrow
sweep (chalk line generating), and
dual beam squaring (standard) for
both level and plummet.
Greenlee’s SF-420AC Stud Finder with
AC detection finds wood and metal
studs and joists behind walls, floors,
and ceilings up to 1 - 1/2” inches (38
mm) deep and indicates the presence of
energized AC voltage. The SF-420AC
Stud Sensor may be used in stud scan
mode or DeepScan® mode. Stud scan
mode is used for depths up to 3/4” (19
mm) and DeepScan® mode is used for
depths up to 1 - 1/2” deep (38 mm) which
provides the electrical worker with much
needed versatility.
Item #
Description
Item #
Description
SF420AC
Greenlee Wood and Metal Stud Sensor/ Finder with AC Detection
NRL200
NA83
Northwest Instruments Self Leveling Laser with Carrying Case
Northwest Instrument Laser Leveler Tripod
448
Levels
Torpedo Level
Torpedo Level
Our Best Torpedo Level. This level
has a cast aluminum frame with
working surfaces that are lapped for
accuracy. A strong magnetic base
holds the level securely to iron and
steel surfaces. The V-grooved top
working surface is ideal for plumbing
and tubular work.
Item #
* 36071
9” ABS body. 3 vial-level; plumb and
45°. Magnetic base.
Description
Starrett Torpedo Level
Torpedo Level
Item #
* 42264
True Blue® vials are accurate to
within 0.0005” per inch in all 10 level
and plumb working positions. Heavyduty extruded aluminum frame. Vials
read plumb, level and 45°. Strongholding magnetic edge, V-grooved
working edge fits on pipe or conduit.
Item #
Description
EM81.9
Empire 9” True Blue Heavy Duty Torpedo Level
I-Beam Level
Empires I-Beam levels are designed for accuracy
and durability. The extruded aluminum frame
resists warping, twisting or bending. True Blue®
vials offer superior readability and will never fade,
fog or leak. True Blue® vials are accurate to
within 0.0005” per inch in all 10 level and plumb
working positions. Super strong anodized I-beam
frame. Strong holding magnetic edge with shock
absorbing endcaps. Top reading window.
Item #
Description
EM81.96
Empire 96” HD Magnetic Level
Description
Stanley 9” Magnetic Torpedo Level
Magnetic Level
True Blue® vials are accurate to within 0.0005” per inch in all 10 level and
plumb working positions. Super strong anodized I-beam frame. Strong holding
magnetic edge and shock absorbing endcaps. Top reading window, available in
24” and 48”.
Item #
Description
59124
59148
Empire 24” Magnetic Level
Empire 48” Magnetic Level
Pocket Level
Strong molded frame. Overall length
5” with top read window, durable
pocket clip.
Combination Square
This Empire Combination Square
has a 12” steel blade with inch
graduations, machined square head
with self-aligning draw bolt and
hardened scriber.
Item #
* 845EL
Item #
Description
230EMP
Empire 12” Combination Square with Hand Scriber
Description
Empire 5” Pocket Level with Clip
Level
Powerwinder Chalk Box
This Empire aluminum level features
a magnetic edge to hold onto ferrous
surfaces, advanced frame design
assures accuracy. Top read window
as well as beveled end caps to protect
vials from shock.
Patented ChalkView Case - see amount
of chalk inside the case. Rewinds
3-1/2x faster, has a 3.5:1 gear ratio.
Also features the Crank Clutch, crank
handle will spin when pulling out string.
Stainless steel crank handle and hook.
On-board hook storage as well as 100
feet of high strength string.
Item #
Description
47460
47803
Stanley Powerwinder Chalk Box with 100’ofString
Stanley Blue Chalk For Chalk Line 8 oz
Item #
Description
581722
Empire 72” Magnetic Tradesman Aluminum Level, 2 per pack
449
Industrial Staplers & Hardware
Tacker Staple Gun and Staples
Arrow T55 tacker gun features baked enamel
finish, all steel construction, hand contoured
handle, safety handle lock, visual refill
window, patented jam proof mechanism and
molded plastic handle stop. Also has staples
in these available sizes.
Item #
Description
T50M
T501/2
T501/4
T505/16
T509/16
Arrow Heavy Duty Staple Gun Tacker
Arrow Staples 1/2”, 1250 per box
Hammer Stapler and Staples
All steel construction with high carbon hardened steel
working parts, patented jam proof mechanisms, precision
locked rear loading, retractable striking edge, specially
designed power grip handles, durable chrome finish.
Item #
Description
HT50A
T501/2
T501/4
T503/8
T505/16
T509/16
Arrow Hammer Stapler
Seam Stapler and Staples
Drop In Anchors
Arrow extra heavy duty plier type
stapler features all steel construction,
chrome finish, hand guide loop, cam
actuated double leverage mechanism,
& 2 1/2” throat for tougher materials.
Item #
Description
P35
P353/8
Arrow Seam Stapler
Arrow Seam Staples 3/8” 5040 per box
Headed Fasteners
PDP-100 1” headed fastener.
100 quantity.
Item #
Description
PDP100
PDP150
PDP200
PDP250
Simpson 1” Headed Fastener, 100 per box
Simpson 1-1/2” Headed Fastener, 100 per box
Simpson 2” Headed Fastener, 100 per box
Simpson 2-1/2” Headed Fastener, 100 per box
Retrofit Bolts
Simpson RFB retrofit bolt pre-cut threaded rod, supplied
with a nut and washer. They may be ordered in bulk.
Use with the Epoxy-Tie to anchor connectors in existing
concrete and masonry. Inspection is easy, as the bolt
head is stamped with the rod length and “No Equal”
symbol for identification after installation.
Item #
Description
Drop-in anchors are internally threaded
deformation controlled expansion anchors with a
preassembled expander plug, suitable for flush
mount applications in solid base materials. The
anchor is set by driving the expansion plug towards
the bottom of the anchor using the setting tool.
Drop-in anchors are also available in coil-threaded
versions for 1/2” and 3/4” coil threaded rod.
Item #
Description
DIA25
DIA37
DIA50
DIA50C
DIA75
DIA75C
DIA62
Simpson Drop-In Anchor, Zinc Plated Steel, 1/4”, 100 per box
Simpson Drop-In Anchor, Coil Zinc Plated Steel, 1/2”, 50 per box
Simpson Dropin Anchor, Coil Zinc Plated Steel, 3/4”, 20 per box
Washered Fasteners
Simpson Strong-Tie Anchor Systems
PDPW100 1” Headed Fasteners with
3/4” metal washers, 100 per box.
Item #
Description
PDPWL100
PDPWL150
PDPWL200
PDPWL250
PDPWL300
Simpson Washered Fastener, 2”, 100 per box
Simpson Washered Fastener, 1-1/2”, 100 per box
Simpson Washered Fastener, 2-1/2”, 100 per box
Sleeve-All Anchors
Simpson Retrofit Bolt 1/2” X 6”, 50 per box
RFB#4X6
RFB#6X10.5 Simpson Retrofit Bolt 3/4” X 10.5”, 25 per box
Expanding sleeve anchors for use
in all types of hollow and solid base
materials. Available in acorn, hex, rod
coupler, flat or round head styles for a
wide range of applications.
Titen Screw Anchor
Higher load capacity and vibration resistance: threads
along the length of the anchor efficiently transfer the load
to the base material. Ratchet teeth on the underside of the
hex-washer head help prevent the anchor from loosening in
vibratory conditions specialized heat treating.
Item #
Description
THD37300H
THD37400H
THD50300H
THD75600H
THD62600H
Simpson Titen HD High Strength Screw Anchor, 3/8” X 3”, 50 per box
450
Item #
Description
SL37300H
SL25214A
SL50400H
SL75414H
SL37400H
SL62414H
SL37178H
SL50214H
SL50300H
Simpson Sleeve-All Anchor Zinc Plated 3/8” X 3” 50 per box
Simpson Sleeve-All Anchor Zinc Plated 1/4” X 2-1/4” 100 per box
Hardware & Glue
Wedge-All Anchor
Masonry Screws
Screw anchors shall have 360°
contact with the base material and
shall not require oversized holes
for installation. Fasteners shall be
manufactured from carbon steel,
and are heat-treated. Anchors shall
be zinc plated in accordance with
ASTM B633. Anchors are not to be
reused after initial installation. Screw
anchors shall be Titen HD anchors
from Simpson Strong-Tie, Pleasanton,
CA. Anchors shall be installed per
Simpson Strong-Tie’s instructions for
the Titen HD. Must use a 3/4” wedgeall or masonry bit for hole and an 1
1/8” socket or wrench for installation.
Item #
Description
TTN18134H
TTN18214H
TTN18234H
TTN18314H
TTN18134PF
TTN18214PF
TTN18234PF
TTN18314PF
TTN25114H
TTN25134H
TTN25214H
TTN25134PF
TTN25214PF
TTN25234PF
TTN25314PF
TTN25400PF
TTN25500PF
TTN25600PF
Simpson Titen Masonry Screw, 3/16” X 1-3/4” Hex, 100 per box
Simpson Titen Masonry Screw, 3/16” X 1-3/4”, Phillips, 100 per box
Simpson Titen Masonry Screw 1/4” X 2-1/4”, Phillips, 100 per box
Simpson Titen Masonry Screw, 1/4” X 4”, Phillips, 100 per box
The Wedge-All is a non-bottom
bearing, wedge style expansion
anchor for use in solid concrete or
grout filled masonry. A one-piece clip
ensures uniform holding capacity that
increases as tension is applied. The
threaded stud version is available in
nine diameters and multiple lengths. A
single size tie-wire version is available
for wire supported fixtures. Threaded
studs are set by tightening the nut.
Tie-wire anchors are set with the claw
end of a hammer.
Item # Description
* WA16000 Simpson Wedge-All Wedge Anchor Zinc Plated, 1” X 6, 100 per box
* WA25214 Simpson Wedge-All Wedge Anchor Zinc Plated 1/4” X 2-1/4” 100 per box
* WA25314 Simpson Wedge-All Wedge Anchor Zinc Plated 1/4” X 3-1/4” 100 per box
* WA37234 Simpson Wedge-All Wedge Anchor Zinc Plated 3/8” X 2-3/4”, 50 per box
* WA37300 Simpson Wedge-All Wedge Anchor Zinc Plated 3/8” X 3”, 50 per box
* WA37500 Simpson Wedge-All Wedge Anchor Zinc Plated, 3/8” X 5”, 50 per box
* WA62100 Simpson Wedge-All Wedge Anchor Zinc Plated 5/8” X 10, 10 per box
Super Glue
Virtually Anything!
Super Glue is a name synonymous
around the world with strength, quality,
and durability. Original formula Super
Glue forms the strongest bonds on
clean breaks of non-porous material
such as plastic, rubber, and metal,
and once exposed to air it bonds
instantly and sets in seconds.
We can get and stock virtually ANY product you need. Just another way
we do whatever it takes to serve you best!
Item #
Description
NETHNG4U
Virtually Anything, One Size Fits All
Item #
Description
2PLSG
Liquid Super Glue, 2 per pack
451
Rope
Treeline Bull Rope
Multiline II Bull Rope
New England’s most popular 3strand bull rope. Composite rope
made of polyester yarns wrapped
around a core of polyolefin in each
strand. Spun polyester is added to
the surface for better grip and chafe
protection. Identified by 2 orange
markers on the surface strand.
Available in 150’ sections, 600’ spools
or cut to order. 7300-20 series is 5/8”
diameter and is 8,200 tensile strength.
7300-24 series is 3/4” diameter and is
10,500 tensile strength.
Tightly braided, 12-strand rope offers
non-hockling, torque free performance.
Excellent knot holding flexibility and
handling for a larger diameter rope.
Enhanced with a protective finish.
12,200 lb tensile strength. Order by
precut 120’ section, 600’ spool or by
the foot. 3/4” diameter.
Item #
Description
1350-24-120 New England 12 Strand Braided Treeline Rope 3/4” X 120’
1350-24-600 New England 12 Strand Braided Treeline Rope 3/4” X 600’
Item #
Description
7300-20-150
7300-20-600
7300-24-150
7300-24-600
New England Multiline II Rope 5/8”X 150’ Spool
New England Multiline II Rope 5/8” X 600’ Spool
New England Multiline II Rope 3/4”X 150’ Spool
New England Multiline II Rope 3/4” X 600’ Spool
3-Strand Safety
Blue Climbing Rope
Braided Safety Blue Rope
The finest 3-strand climbing rope
produced. Each strand is constructed
of high tenacity polyester cover
yarns securely wrapped around New
England trademark “BLUE” nylon
core. Firmly twisted strands resist
backturning, abrasion and bouncing,
common in most 3-strand climbing
ropes. Tensile strength of 6500 lbs.
Item #
Description
7250-16-120 New England Safety Blue Rope 3-Strand 1/2” X 120’ Spool
Tightly plied, polyester 16-strand
cover, offers smooth snag free
surface. Polyolefin yarns in the core
of each cover strand reduce weight
and improve handling. Twisted
parallel blue sore yarns allow the rope
to stay firm and round while in use,
and also acts as a warning guide if
the cover is cut. Tensile strength of
7700 lbs.
Item #
Description
3250-16-120
3250-16-600
New England Safety Blue Rope Braided 1/2” X 120’ Spool
New England Safety Blue Rope Braided 1/2” X 600’ Spool
Kenrmantle Rope
Throw Line
KM III 1/2” diameter Static Kernmantle
rope is a NFPA approved lifeline.
Filament polyester cover for durability
over nylon core for firmness and
strength. Use as a speedline, handline
or any other application that requires
low stretch. Not splicable. 10,000 lb
tensile strength. White rope with blue
tracers.
Item #
Description
3300-16-600 New England KMIII Static Kernmantle Rope 1/2” X 600’
3300-16-1200 New England KMIII Static Kernmantle Rope 1/2” X 1200’
452
16 oz throw weight with 120’
polyethylene line.
Item #
* 0898209
Description
Weaver 12 oz Throw Weight with 150’ Polyethylene Line
Rope
Yellow Monofilament
Polypropylene Rope
Polyplus Combination Rope
Hooven Allison premium general
purpose monofilament polypropylene
yellow fiber rope with 2 blue tracers is
5/8” x 600’ and has a standard tensile
strength of 6800 lb and minimum
tensile strength of 6120 lb. It features
balanced construction, medium lay,
good strength and moderate stretch.
Lightweight and buoyant. It also has
good abrasion resistance and good
UV resistance.
Hooven Allison commercial polyplus
combination rope is a premium multipurpose rope with good dielectric
properties. High tenacity polyester
with Hooven Allison Pro-Plus core
balanced 4 stage construction, medium
lay, features good strength, low
stretch, good abrasion resistance, and
excellent UV resistance. It is natural
white in color with a red core.
Item #
Description
Item #
Description
167
1673/8
1673/4
1671/1
1/4” X 1200’ Polyplus Combination Rope
1” X 1200’ Polyplus Combination Rope
81030
81031
81032
81033
Premium Yellow Monofilament Polypro Truck Rope 1/2” X 600’
Spool 1/4” X 600’ Manila Rope
Monofilament Polypropylene Rope
Elasticity to absorb sudden shock
loads. Excellent resistance to
abrasion. It is rot resistant & not
damaged by oil, grease, gasoline,
mildew, marine growth or most
chemicals, can be stowed wet without
damage to its fibers. Spliceable;
however, a minimum of 4 extra
tucks should be made to assure a
dependable splice.
T.W. Evans 1/4” x 600’ premium
polypropylene rope on a roll is almost
twice as strong as manila and is
resistant to mildew, rot and most
chemicals. It floats on the surface
of the water and has only moderate
stretch.
Item #
Description
80010
80035
80025EVANS
80040EVANS
81030EVANS
Evans Monofilament Polypropylen Rope 1/4” X 600’
Evans Monofilament Polypropylene Rope 5/8” X 600’
Evans Monofilament Polypropylene Rope 3/8” X 600’
Monofilament Polypropylene Rope 3/4” X 600’
Premium White Monofilament Polypro Truck Rope 1/2” X 600’
Item #
Description
16012
16015
16020
16018
16046
16021
16022
Spool 1” X 600’ Manila Rope
Extralene Combination Rope
Uncoated Wire Rope
This special combination rope
blends the compatible and unique
characteristics of Polyester and
Polyolefin synthetic fibers. The
outer jacket yarns are made of
Polyolefin filaments with a covering
sheath of Polyester in a single yarn
construction. These yarns give
superior resistance to abrasive or
frictional wear. The inner yarns are
made of Polyolefin fiber for good
strength and low weight. Good
strength, low stretch, with good ability
to handle repeated loadings. Holds
knots well making it a great marine
rope.
6 x 19. 1/2” diameter. Working load
limit 4280 lbs. Fiber core construction
and treated with a rust prohibiting
oil. Uncoated wire rope. Bulk retailer
demand for thicker aircraft cable.
Item #
Description
7008027
7008227
7008327
7008427
Campbell 1/4” X 500’ Uncoated Wire Rope- 1040 lb Work Limit
Item #
* R9142
* 05466
* 05470
Description
Orion Extralene Combination Rope 1/4” X 1200’
453
Load Binding & Hardware
Grade 30 Chain
Excellent general-purpose chain
of standard commercial quality.
Frequently used for fabricating tow
chains, binding or tie down chains.
Standard material: Low carbon steel.
Standard finish: zinc plated. Proof
tested. Order unit is by the pal. Do not
use for overhead lifting.
Item #
Description
0140823
0140623
0140523
0140423
0140323
Campbell 1/2” Blu-Krome System 3 Coil Chain In Pail- 40’/ Pail
Campbell 1/4” Blu-Krome System 3 Coil Chain In Pail- 141’/Pail
Campbell 3/16” Blu-Krome System 3 Coil Chain In Pail- 250’/Pail
Grade 70 Binder Chain
A complete line of tie down chains are available. Chain may be used in
accordance with the latest D.O.T. regulations. Standard finish: Yellow
chromated zinc electroplated. Chain has a forged heat treated clevis grab
hook on each end. Do not use for overhead lifting.
Item #
Description
0513574
0513660
0513665
0513667
Campbell 5/16”X 20’ Binder Chain with Clevis Hook 25/ Drum
Ratchet Load Binder
Ratchet load binder. To tighten chain, typically for
cargo securement. Meets U.S. D.O.T. 393.100
-393.102 requirements for use with chain. Ratchet
lever. Allows for easier adjustment of tension
and greater range of take-up. For chain size 3/8”
(System 7) and for chain size 1/2” (System 4).
Ratchet Type Load Binder
Ratchet type load binder for 5/16” or
3/8” system, 7 chain.
Item #
Description
6207803
Campbell Ratchet Type Load Binder For 3/8” Sys. 7 Chain
Bolt Shackle
Item #
Description
6207504
Screw Pin Shackle
Screw pin anchor shackle. Standard
shackle material: drop-forged carbon
steel. Standard finish: galvanized to
ASTM A-153 specification. Working
load limit permanently shown on
every shackle. Design factor: 6 to
1. Meets the design requirements
of the following specification: federal
specification RR-C-271, Type IVA,
Grade A, Class 2. Order unit is “Each”.
Item #
* 5410835
* 5411035
* 5411435
* 5411235
454
Safety anchor shackle. Standard shackle
material: drop-forged carbon steel. Standard
finish: galvanized to ASTM A-153 specification.
Working load limit permanently shown on
every shackle. Design factor: 6 to 1 safety
meets the design requirements of the following
specification: federal specification RR-C-271,
Type IVB, Grade A, Class 3.
Item #
Description
5391035
5390435
5390835
Campbell 5/8” Anchor Shackle Bolt Style Forged, Galvanized
Eye Bolt
Standard material: drop-forged carbon
steel. WLL’s apply only to eyebolts in
lifting or pulling applications. Standard
finish: galvanized to ASTM A-153
specification. If angular loading is
necessary, eyebolts to be used at
reduced loads. Order unit is “Each”.
Description
Campbell 1/2” Screw Pin Anchor Shackle, Forged, Galvanized
Campbell 3/4” Screw Pin Anchor” Shackle, Forged, Galvanized
Item #
Description
7150114
7150119
Campbell 5/8” X 6” Reg Nut Eyebolt, Forged, Galvanized
Campbell 3/4” X 6” Reg Nut Eyebolt, Forged, Galvanized
Blocks
Self Locking Block
Self Locking Block
Self locking block, blocks without
ropes and hooks. Nose extends over
keeper. It is made of light galvanized
steel and aluminum alloy. Sheaves
have bronze bushings. Weight is 1 lb.
Self locking block, blocks without
ropes and hooks. It is made of light
galvanized steel and aluminum alloy.
Sheaves have bronze bushings.
Item #
* H267
Item #
Description
Klein Self Locking Block
* H268
Description
Klein Self Locking Block with Eye & Nose Extendeds Over Keeper
Block without
Ropes and Hooks
3/8” Block and Tackle
Blocks without ropes and hooks. Made
of light galvanized steel and aluminum
alloy. Sheaves have bronze bushings.
3/8” block and tackle.
Item #
Description
Item #
Description
H267H268
Klein 3/8” Block & Tackle
267
Klein Block without Ropes and Hooks
Block without Ropes
and Hook with Eye
Swivel Anchor Hook
Swivel anchor hook for block and
tackle.
Block without ropes and hook with
eye.
Item #
Description
268KL
Klein Block without Ropes & Hooks, with Eye
Item #
* 259
Description
Klein Swivel Anchor Hook For Block & Tackle
3 In Hook Snatch Block
3” Shackle Snatch Block
3” hook snatch block - 2 ton limit 5/16”
X 3/8” wire rope.
3” shackle snatch block - 2 ton limit
5/16” X 3/8” wire rope.
Item #
SB3S
Description
Item #
Description
3” Shackle Snatch Block - 2 Ton Limit 5/16” X 3/8” Wire Rope
SB3H
3” Hook Snatch Block - 2 Ton Limit 5/16” X 3/8” Wire Rope
Campbell 3001 Regular
Wood Shell Block
Round loose hook “AF”, hard wood
shells, drop forged fittings. Available
with bronzed self-lubricating bushings.
Has galvanized metal parts. Order
unit is each.
Item #
Description
7205536
Campbell 3001 Single 5” Regular Wood Shell Block, Loose
Hand Line Snap Swivel
Item #
* 470
Klein swivel hook with plunger latch is made of forged
steel with swivel clevis and quick acting plunger style
latch. Its overall length is 5”. Swivel opening is 1-3/16”
X 1”, and is designed to take 1/2” or lighter hand
lines. Swivel action prevents accidental fouling into
secondary wires. Maximum safe load is 750 lbs.
Description
Klein Hand Line Snap Swivel
Special Made
Hook with Swivel
Side Opening Block
Side opening block with swivel hook
and safety snap.
Item #
* 3550BLOCK
Special made hook with swivel.
Description
Item #
Hastings Side Opening Block with Swivel Hook & Safety Snap
Description
303B4MSPL Special Made Hook with Swivel
455
Load Binding & Tie Downs
Polyester Tiedown One Piece
Endless Style
Ratchet Type Load Binder
Lift-All 2” polyester tie down, 10000
lb ultimate strength, 3300 lb rated
capacity.
Ratchet type load binder for 5/16” or
3/8” system, 7 chain.
Item #
Description
Item #
Description
61011X12
61011X16
Liftall 2” X 12’ Nylon Load Binder, 10,000 lb Ult. Strength
Liftall 2” X 16’ Nylon Load Binder, 10,000 lb Ult. Strength
6207504
6207803
Molded Rubber Strap
Work Ties
Tough nylon cable ties in a variety of
sizes. Continuous locking threads let
you adjust to the exact length needed.
Black cable ties are ultraviolet
resistant for prolonged life. 10 bags of
100 per case.
Special EPDM compound will not
crack, rot or lose rebound qualities. It
is corrosive resistant, low temperature
resistant, non brittle to 40°F, sunlight,
ozone and weather resistant.
Item #
* RS15
* RS20
* RS24K
* RS31
* RS41
Description
Keeper 14” EPDM Molded Rubber Strap
Item #
Description
CB04
CB14
CT07
CT14
CB07
CB11
CT04
4” Black Cable Tie 18 lb Tensile Strength 100 per pack
7” Natural Cable Tie 50 lb Tensile Strength 100 per pack
Bungee Cords
Heavy Duty Bungee Cord
Cord is made from top quality
premium grade long lasting rubber.
Vinyl coated steel hook has 70 lb
capacity.
Item #
Description
06014
06017
06019
06025
06031
06037
Keeper 13” Bungee Cord
456
Industrial strength heavy duty
cord. 100% more rubber inside 3x
the tension. Corrosion resistant,
dichromate hooks.
Item #
Description
06192
06180
06182
06185
Keeper 18” Heavy Duty Bungee Cord
Slings
Pole Sling
Nylon Sling
Bashlin’s 1-3/4” nylon pole sling with
heat-embossed leather tag.
2” endless 2-ply nylon sling. Abrasion resistant fibers cover both
faces and edges for greater sling life. Tuff-Tag provides required
OSHA information for the life of the sling, not just the life of the tag.
Item #
Size
Vert. Cap.
Choker Cap.
Basket Cap.
EN21922
EN21923
EN21924
EN21926
EN21928
2” x 2’
2” x 3’
2” x 4’
2” x 6’
2” x 8’
6,000 lbs
6,000 lbs
6,000 lbs
6,000 lbs
6,000 lbs
4,800 lbs
4,800 lbs
4,800 lbs
4,800 lbs
4,800 lbs
12,000 lbs
12,000 lbs
12,000 lbs
12,000 lbs
12,000 lbs
Item #
2012LT22
2012LT36
2012LT48
Size
Vert. Cap.
Choker Cap.
Basket Cap.
1-3/4” x 22”
1-3/4” x 36”
1-3/4” x 48”
3,300 lbs
3,300 lbs
3,300 lbs
2,640 lbs
2,640 lbs
2,640 lbs
6,600 lbs
6,600 lbs
6,600 lbs
Tuffedge 1600 Polyester
2 Ply Flat Eye Sling
Pole Sling
Lift All Tuff-Edge 1600 polyester 2 ply flat eye sling. Tests prove Tuff-Edge
to be 30% more resistant to edge cutting and 67% more resistant to edge
abrasion than standard sling webbing. Red core yarn warning system aids in the
inspection process. Tuff-Tag provides a serial numbered ID for traceability for the
life of the sling. Silver colored web treatment fights abrasion for added life.
Item #
Size
Vert. Cap.
Choker Cap.
Basket Cap.
EE2801T4
EE2801T6
EE2801T8
EE2801T10
EE2801T12
EE2801T16
EE2801T20
EE2802T4
EE2802T6
EE2802T8
EE2802T10
EE2802T12
EE2802T14
EE2802T16
EE2802T20
1” x 4’
1” x 6’
1” x 8’
1” x 10’
1” x 12’
1” x 16’
1” x 20’
2” x 4’
2” x 6’
2” x 8’
2” x 10’
2” x 12’
2” x 14’
2” x 16’
2” x 20’
3,200 lbs
3,200 lbs
3,200 lbs
3,200 lbs
3,200 lbs
3,200 lbs
3,200 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
2,500 lbs
2,500 lbs
2,500 lbs
2,500 lbs
2,500 lbs
2,500 lbs
2,500 lbs
5,000 lbs
5,000 lbs
5,000 lbs
5,000 lbs
5,000 lbs
5,000 lbs
5,000 lbs
5,000 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
6,400 lbs
12,800 lbs
12,800 lbs
12,800 lbs
12,800 lbs
12,800 lbs
12,800 lbs
12,800 lbs
12,800 lbs
Bashlin’s 1-3/4” nylon pole sling
with heat-embossed leather tag and
hardware. Designed for easy use with
a shotgun stick.
Item #
Size
Vert. Cap.
Choker Cap.
Basket Cap.
* 2011LT36
1-3/4” x 36”
1,000 lbs
1,000 lbs
2,000 lbs
Permaloc Wire Rope Sling
Permaloc sling featuring Flemish splice
technique to form the eyes. Contains
reserve strength should the sling sleeve
become damaged. Contains TuffTag for capacity and serial numbered
ID for traceability. Use of EIP (extra
improved plow), IWRC ( independent
wire rope core) rope gives 15% greater
capacity than IP(improved plow), IWRC
ropes. Countless combinations of
sling terminations - hooks, chokers and
thimbles are available to fit specific lift
requirements.
Endless Round Sling
A versatile sling for general use.
Unlimited ways of rigging- not limited
to configuration of the sling.
Item #
Size
Vert. Cap.
Choker Cap.
Basket Cap.
ENR2-4
ENR2-6
ENR2-8
2” x 4’
2” x 6’
2” x 8’
5,300 lbs
5,300 lbs
5,300 lbs
4,200 lbs
4,200 lbs
4,200 lbs
10,600 lbs
10,600 lbs
10,600 lbs
Item #
Description
540081090
540081220
540081190
540081200
540081210
540081330
Liftall 3/8” X 4’ Wire Rope Sling 6X19 EIP
Liftall 1/2” X 10’ Wire Rope Sling 6X19 IMP E/E
Liftall 1/2” X 4’ Wire Rope Sling 6X19 IMP E/E
457
Hoists
2 Ton Large Insulated Hoist
1.5 Ton Web Strap Winch Hoist
1.5 ton capacity web hoist. Features
include 3000 lb double line capacity,
1500 lb single line capacity, aluminum
alloy frame, exclusive web guide
keeps strap from twisting. Interlocking
system will not slip, fiberglass handle,
open construction for visual inspection
and stress link system to prevent
overload. Web length 7’ and weighs
10 lbs.
2 ton capacity web hoist. Features
keeps strap from twisting, interlocking
system will not slip, fiberglass handle,
open construction for visual inspection
and stress link system to prevent
overload. Web length 8.6’ and weighs
16 lb. Gate style hooks included.
Item #
Description
Item #
Description
2010920114
Lug-All 1 1/2 Ton Hoist w/Small Frame Web Style with Wing Nut
4U
Lug-All Insulated Hoist 2 Ton Large Frame
1.5 Ton Web Strap Winch Hoist
1.5 Ton Cable Ratchet
Winch Hoist
1.5 ton capacity hoist. Features
alloy frame, flexible aircraft cable,
interlocking system will not slip. Open
construction for visual inspection.
Cable length 11.6’ and weighs 9 lb.
Item #
* 300010
1.5 ton capacity web hoist. Features
keeps strap from twisting. Interlocking
system will not slip. Open construction
for visual inspection. Web length 7’
and weighs 11 lbs.
Description
Item #
Description
Lug-All Small Frame Cable Style 1.5 Ton Cap. Reg Lowering Hoist
3AK
Lug-All Medium Frame 1.5 Ton Capacity Web Strap Hoist
1.5 Ton Cable Ratchet
Winch Hoist
Bridge, Jib, Gantry Cranes &
Hoists Checklist
1.5 ton capacity hoist. Features
alloy frame, flexible aircraft cable,
interlocking system will not slip. Open
construction for visual inspection.
Cable length 30’ and weighs 13.75 lb.
This Devtra checklist is for inspection of
all bridge, jib, gantry cranes and hoists
used in manufacturing, maintenance,
industrial, construction, indoor, outdoor,
powered, pendant controlled, remote/
radio frequency controlled, pendant,
manual, cab operated, all models,
brands, capacity, etc.
Item #
Description
Item #
300030
Lug-All Medium Frame 1.5 Ton Capacity Regular Lowering Hoist
2006DEVTRA Devtra Bridge, Jib, Gantry Cranes & Hoists Check List
458
Description
Hoists
1.5 Ton Lineman’s Hoist
1.5 ton capacity linemans hoist.
Features include 3000 lb double
line capacity, 1500 lb single line
capacity, all hooks and gates swivel
360°, positive hold locking in all
environments and standard forged
hook. Web length 15’ and weighs
13 lb.
1.5 ton capacity linemans hoist.
environments and standard forged
hook. Web length 15’ and weighs
13 lb.
Item #
Description
322CB
Little Mule Nylon Ratcheting Hoist 23” & 27” Hook To Hook
3 Ton Ratchet Lever Hoist
Item #
Description
322B
Little Mule Nylon Ratcheting Hoist 20” & 23” Standard Hook
Coffing aluminum ratchet lever
hoist with ratchet and pawl design.
Features include 6000 lb capacity,
handle stops keep handle from free
spinning, pull, lift or bind. Lifetime
warranty. Weighs 35 lb.
Item #
Description
05311
Coffing Little Mule Ratchet Lever Hoists with 3 Ton Capacity
1 Ton Single Strap Nylon Hoist
1.5 ton capacity lineman’s hoist.
environments and swivel gate latch
with hot stick hook. Web length 15’
and weighs 13 lb.
Designed with special features for
the utility worker. Features include
plastisol cap on handle end for use
with rubber gloves, hot line tool hooks
on gates, 2000 lb capacity and lifts
5.75. Weighs 13 lb.
Item #
Description
Item #
Description
322DHB
Little Mule Nylon Ratcheting Hoist 22” & 26” Hook To Hook
C3090323
AB Chance 1 Ton Nylon Strap Hoist with Regular Handle
459
Tool Bags / Buckets
Tool Bag
Tool Chests
Dimensions 36” W x 21” D x 24-1/2” H. Features
the Griplatch® drawer latching system, 16-gauge
steel internal cage, and shell/drawers constructed
of 18-gauge steel for durability. Durable work
surface lets you work right next to your tools.
Full-extension ball bearing drawer slides open and
close easier as load increases. Gas cover struts
let you easily open and close lid. Includes non-slip
drawer liners. Open view top lets you quickly see
all items stored in the top. Pivot locking system
delivers maximum security. Powder coat finish
gives ultimate rust resistance for a long life.
Griplatch® drawer latching system keeps drawers
secure when closed. The toughest storage unit
built for the industrial professional.
Item #
Description
965563
965564
Craftsman 36” Wide Ball Bearing 5 Drawer Tool Chest- Black
Craftsman 36” Wide Ball Bearing 7 Drawer Tool Chest- Black
Estex tool carrying bag is 24” x 14” x 10” &
is made of heavy canvas with a 1/4” double
tempered masonite bottom. Other features
include: 6 brass studs on bottom, heavy
duty polypropylene web handles sewn
completely around the bag (900 lb break
strength), heavy steel top frame enclosed in
canvas, top grain leather straps reinforced
with leather, double riveted with rivet caps,
industrial weight nickel plated snaps on
pockets & heavy vinyl coated nylon bottom
reinforcement & weather seal.
Item #
Description
211324
Estex Tool Bag with #4 Canvas, 24” X 19” X 11”
Aerial Bucket
The Estex oval bucket bag with
blue sides & hook holes has 15 tool
pockets & a molded top ring. The
bucket is made of extra heavy canvas
& has grommets placed so that it can
be used with Estex arial tool apron
or hooks. It has a durable molded
bottom. Polyethylene liner keeps
these bags totally rigid but still allows
inside pockets to organize tools.
Estex oval buckets are your best
value for price & durability.
Vinyl Tool Bag
Estex vinyl tool bag with weather
flap and inner pocket is 24” L x 19”
W x 19” H. The safety orange vinyl
bag repels water while the weather
flap keeps rain from entering the bag
through the frame.
Item #
* 45331
Description
Item #
Description
1820HB
Estex Aerial Bucket with Blue Sides
Lineman’s Belt Bag
Estex Vinyl Tool Bag with Weather Flap & Inner Pocket
Aerial Bucket Bag
The Estex oval bucket bag with
hook holes has 15 tool pockets and
a molded top ring. The bucket is
made of extra heavy canvas and has
grommets placed so that can be used
with Estex arial tool apron or hooks.
It has a durable molded bottom and
PVC supports to keep the bucket open.
Estex oval buckets are your best value
for price and durability.
Item #
* 5144KL
Description
This heavyweight canvas lineman’s
pouch attaches to your belt with snaps
and black web belt loops. The pouch
has reinforced binding at the top hem
and a brass grommet in the bottom for
drainage.
Item #
Description
5142
Lineman’s Belt Bag
Tool Lanyard
Aerial Bucket bag without Hooks
Canvas Tool Bucket
Estex white Straight Wall Bucket has
a leather bottom and heavy canvas
bottom. It is 12” in diameter by 15”
high and has a #3 swivel snap. At
the top is a yellow rope with a special
splice in it so that the more weight you
put in your bucket, the tighter the rope
gets.
Item #
* 2069
460
Description
Estex Heavy Canvas Tool Bucket 12”X 15”
Miller Bandit tool lanyard is designed to be
attached to the worker’s waist belt while
still allowing enough freedom of movement
to perform the task at hand. Tools may
be attached using the carabineer or by
looping the cord around the tool & cinching
tight. Features include loop for waist
belt attachment, lightweight, aluminum
mini carabineer and cord adjuster for tool
attachment. Ideal for construction, general
industry, telecommunications, roofing,
ironwork and maintenance.
Item #
Description
9076BK
9077
Miller Tool Wrist Bandit Holder
Miller Bandit Lanyard Bungi Tool Holder with Hook
Storage Chests / Cabinets
Storage Chest
Storage Chest
Greenlee mobile tool storage chests are ideal
for any applications that require frequent
transporting. Greenlee’s mobile tool storage
unit is equipped with an enhanced lid bolster
for added support and durability and steel
support arms to secure the lid in the open
position. When it is necessary to transport
this tool chest, simply grab the large,
recessed fold-down handles and lift.
Greenlee Mobile tool storage chests are ideal
for any applications that require frequent
transporting. This mobile storage chest provides
storage for both large and small items. Larger
items can be placed in the bottom of the chest
while storage for smaller items is available in a
storage tray that is located on the back wall of
the chest.
Item #
Description
Item #
Description
3048
Greenlee Storage Chest 30” X 48” X 48”
2448
Greenlee Storage Chest 24” X 48” X 24”
Storage Chest
Casters
Greenlee flat-top metal tool box is an all around
job site unit that offers both a place to store tools
and supplies and also a job planning area. The
top portion of this tool cabinet acts as a workspace
to review and adjust plans. Underneath the
workspace is a large storage area and is able to
house tall or bulky items because of the flat top
surface. Inside the industrial storage unit, the
hinged lower shelf of this unit makes even larger
space for oversized, tall, or bulky items.
Greenlee 603 6” caster wheels (4 Wheels).
Capacity: 2000-lbs. Wheel width: 2”, wheel
diameter: 6”, (2) ridgid wheels, (2) swivel
wheels. Caster bolt pattern 2-7/8” x 3-1/4”.
Polyolefin-injected molded hard rubber casters:
stain-resistant, chemical-resistant, and nonmarking. Caster set includes (16) 3/8-16 x 1”
self-threading mounting screws.
Item #
Description
Item #
Description
4848
Greenlee Flat Top Storage Box 48”X 48”X 30”
603GR
Greenlee Caster Set
45 gallon Storage Cabinet
Flammable Liquid Cabinet
Justrite Yellow Sure-Grip® EX Safety Cabinets for
flammables. Flush mounted U-Loc™ handle with
double key set also accepts an optional padlock for
added convenience and security. Includes rounded
safety doors, 3-point stainless steel bullet latching
system for positive closure, twin vents with flame
arresters, and durable powder paint finish. Meets
OSHA & NFPA, FM Approved. 10-year Warranty.
Haz-Alert™ reflective labels burst with high visibility
in the dark. Firefighter friendly zoned positioning
helps rescue personnel quickly isolate volatile liquids. SpillSlope™ shelves
safely drain leaks to back and bottom of leaktight 2” sump. Justrite cabinets are
constructed of sturdy 18-gauge double wall, welded steel with 1.5” of insulating
air space for fire resistance. 1 adjustable shelf, 30 gallons. 44” x 43” x 18”.
Justrite Yellow Sure-Grip® EX Safety Cabinets for
Flammables. Flush mounted U-Loc? handle with
double key set also accepts an optional padlock
for added convenience and security. Includes
rounded safety doors, 3-point stainless steel bullet
latching system for positive closure, twin vents with
flame arresters, and durable powder paint finish.
Meets OSHA & NFPA, FM approved. 10-year
warranty. Haz-Alert? reflective labels burst with
high visibility in the dark. Firefighter friendly zoned
positioning helps rescue personnel quickly isolate
volatile liquids. SpillSlope? shelves safely drain
leaks to back and bottom of leaktight 2” sump. Justrite cabinets are constructed
of sturdy 18-gauge double wall, welded steel with 1.5” of insulating air space for
fire resistance. 2 adjustable shelves, 45 gallons. 65” x 43” x 18”.
Item #
Description
Item #
Description
25300
Justrite 30 gallon Flammable Liquid Storage Cabinet
25450
Justrite 45 gallon Flammable Liquid Storage Cabinet
Storage Cabinet
Storage Cabinet
Justrite Red Sure-Grip® EX Safety Cabinets
for paints and inks. Separate and identify
Class III combustibles in high performance
paint and ink safety storage cabinets.
Multiple adjustable shelves accommodate
many smaller paint cans, aerosols, and
inks found in printing, painting, furniture
and automotive operations. OSHA & NFPA
compliant, Justrite’s FM approved safety
cabinets are backed by an industry exclusive
ten-year warranty. 35” x 23” x 18”.
This 1000 series model combines contemporary
styling with time tested design and construction. This
36” wide model contains a three point door locking
device, double doors, “Quiet Door” operation, and
durable heavy-gauge steel construction. It is sure
to bring excellent storage and organization to any
workspace.
Item #
Description
Item #
Description
25491
Justrite 60 gallon Paint and Ink Storage Cabinet
1080GRAY
Lyons Storage Cabinet 36”W X 78”H X 18”D, Gray with 4 Shelves
461
Garden Hose / Nozzles / Sprayers / Pumps
Heavy Duty Water Hose
6-ply construction 500 psi burst strength
double reinforced for commercial strength.
Heavy-duty brass couplings with O-ring
for tight seals. Maximum kink resistance.
Protective collar resists kinks at faucet.
Rugged gray cover resists abrasion and won’t
mark surfaces. 5/8” diameter 50’.
6’ Hose
Fits all sizes of washing machines.
High pressure, reinforced rubber
hose. Brass couplings Individually
packed, 3/8” x 6’.
Item #
Description
WASHHOSE
6’ Washing Machine Hose Female Connection At Both Ends
Hose Nozzle
Item #
Description
CNT5850
200C
Contractor Water Hose 5/8 X 50’
Melnor Hose Washers
Insulated molded grip for spraying hot or cold water.
Solid brass valve stem with permanent adjusting
nut. Hold-open clip for continuous spraying. Rust
resistant stainless steel spring. Self-adjusting “duck”
packing for lifetime leak proof seal. Heavy-duty, full
size, die cast zinc body.
Hose “Y”
Plastic and metal hose Y with or
without shutoff.
Item #
Description
312S
313S
Metal 2 Way / Y Hose Connector, Built-In Shut Offs
Melnor Plastic 2 Way / Y Hose Connector, Built-In Shut Offs
Item #
Description
571GIL
Gilmour Insulated Pistol Grip Nozzle
Hose Nozzle
Solid brass valve stem with permanent adjusting
nut. Hold-open clip for continuous spraying. Rust
resistant stainless steel spring. Self-adjusting “duck”
packing for lifetime leak proof seal. Heavy-duty, full
size, die cast zinc body.
Garden Sprayer
Sprayer- 3 gallon Dura spray. Plastic funnel top
tank. Repairable pump unit with Buna-N seals
and replaceable parts. 30” reinforced chemical
resistant hose. Plastic valve with Buna-N seals
and plastic ext.
Item #
Description
2503
Plastic 3 gallon Sprayer
Item #
Description
573
Gilmour Full Size Pistol Grip Nozzle
Honda Water Pump
Featuring a 8HP
Overhead Valve engine,
full frame, 3” suction
and discharge ports,
317 gallons per minute
discharge capacity, and
oil alert. Pumps solids
up to 1 1/8” in diameter.
Little Giant Submersible Pump
Handles liquid and solid waste
materials up to 3/4” diameter.
1-1/2” Discharge. Cast iron pump
housing with protective epoxy
coating for corrosion and rust
resistance. Oil filled motor housing
for lifetime lubrication and rapid heat
dissipation. Stainless steel screws,
bolts, handle, and seal assembly.
Thermal overload protection.
Manual or automatic operations.
Automatic operation has 9” - 14”
“On” and, 2” - 6” “Off” level range
with adjustable remote float switch.
Item #
Description
9ECIARFS
Little Giant Submersible Pump
462
Item #
Description
WT30X
WB30XHK3X10
WB30DH3X25
WB30DH3X50
Honda Water Pump, 8Hp with 319 Gpm
Tele-Lite 3” X 10’ Hard Suction Hose Kit For Wb40X Pump
Wb30Xdh Tele-Lite Discharge Hose For Wb30X 3” X 25’
Wb30Xdh Tele-Lite Discharge Hose For Wb30X 3” X 50’
Knives
Skinning Knife
Skinning Knife
Ground beveled edge blade design
provides superior performance and
long life. Wood handle with ring
attachment.
Screwdriver type handle with deeper
thumb stop groove protects the gloved
hand. 9” overall length.
Item #
Description
Item #
Description
7080
Wooden Handle Skinning Knife with D-Ring 1.25” X 8”
70861
Buckingham Skinning Knife with Plastic Handle, without Ring
Skinning Knife
Skinning Knife
Comfort cushion handle with carry-ring
attachment. Ground beveled edge
design. Overall length 9”.
Screwdriver type handle with deeper
thumb stop groove protects the gloved
hand. 9” overall length. Carry-ring for
work belt attachment.
Item #
* 7086
Description
Item #
Description
Buckingham Skinning Knife with Plastic Handle & Ring
7090BUC
Buckingham Cushion Handle Lineman’s Skinning Knife
Lockback Knives
Self Retracting Safety Knife
Revolutionary spring-retractable safety
cutter has a heavy-duty spring-activated
blade that automatically retracts the
instant the blade loses contact with the
cutting surface, reducing injuries in the
workplace. Features a slip-resistant
ergonomic handle and stainless steel
blade channel that holds the blade
tight. For right and left handed use.
Guaranteed forever.
Item #
Description
SK4
SKB2
SKB2/50B
Olfa Self Retracting Safety Knife
Olfa Replacement Knife Blades 5 Blades per pack
Olfa Safety Knife Replacement Blades 50 per pack
44003 Klein lightweight lockback
pocket knife with 2 3/4” drop-point
blade. Premium quality AUS8
stainless steel blade offers superior
edge holding. Impact-resistant
nylon resin handle with rubber insert.
Reversible thumb stud provides easy
one-handed opening. Knife is 4 1/8”
long with blade closed, weighs 2.5 lbs.
Item #
Description
44003
Klein Pocket Knife Lockback 2-3/4” SS Blade
Tripsaver Multi-Tool
Lockback Knives
Klein lightweight lockback knife with
2 5/8” sheepfoot blade. Premium
quality AUS8 stainless steel blade
offers superior edge holding. Impactresistant nylon resin handle with rubber
insert. Reversible thumb stud provides
easy one-handed opening. Knife is
4 1/8” with blade closed and weighs
2.5 lbs.
Specially designed for electricians and
maintenance professionals. Features
include, needle nose pliers, beveled
wire cutter, toothed pipe gripper, files,
5-slot wire strippers 10-18 awg wire,
looping hole, scraper, awl, serrated
knife, Phillips, slotted, socket bits, and
nylon pouch.
Item #
Description
Item #
Description
1016KL
Klein Tripsaver Electrical Maintenance Multi-Tool
44005
Klein Pocket Knife Lockback 2-5/8” SS Sheepfoot
463
Knives
Economy Utility Knife
Classic 99® Utility Knife
Retractable utility knife, lightweight,
durable aluminum, 3 position blade,
3 11-921 (Item #129650) heavy duty
blades, blade storage in handle,
handle length 6”, carded.
Item #
* 10099
* 11921A
Retractable utility knife, rugged
metal design. Uses standard 03012
replacement blades.
Item #
Description
03012
RUK7
Replacement Utility Knife Blade, 100 per Dispenser
Economy Retractable Utility Knife
Description
Slimknife®
Stanley Utility Knife
Stanley Heavy Duty Utility Blade, 100 per Dispenser
This retractable Slimknife® multi-purpose
knife has a 6” (152 mm) handle length.
Multi-purpose retractable knife accepts a
wide variety of hobby and craft blades for
cutting, whittling, trimming, modeling, etc.
Slim, lightweight handle is shaped for a
comfortable grip and provides extra blade
storage. Easy blade changes. Furnished
with one 11-111, 11-113, and 11-114 blades.
Folding Knife
Powder-coated, epoxy handle, safety
blade lock, replaceable stainless steel
blade. Blade folds into handle for safe
storage.
Item #
Description
10109
11111
Stanley Slimknife Retractable Blade Knife
Stanley Whittling Craft Replacement Blades, 30 per box
Quick Change Blade Knife
Item #
Description
10049
11040
Stanley Folding Pocket Knife
Stanley Sheepfoot Blade
Change blades quickly, no screwdriver
required. Three position retractable
blade slide, swing-out blade storage
magazine integrated string cutter
even when blade is retracted.
Safety Knife Retractable
Spring-loaded blade retracts
automatically when pressure on slide
button is released. Designed to be
used for opening cartons. A safer
knife since the blade is only exposed
when the knife is in use. Patented
interlocking nose secures blade safely
between knife halves, Safety orange
color for high visibility.
Item #
10189
* 11921A
464
Stanley Utility Knife
Blade Disposal System
Safety First. Plastic container
available with or without a wire wall
rack. Easily and safely dispose of
blades. Tight closing lid. Bright
yellow color.
Stanley Self-Retracting Utility Knife
Strong, durable construction
combines a cast metal core with
bi-material soft panels for a sure
grip. Blade changes with the push of
a button, no tools required , curved
handle design for comfort, control and
balance. Swing-out blade storage
for easy blade access. Integrated
string cutter and retractable slide,
large hang hole for pegboard storage,
padded thumb rest.
10788
* 11921A
* 10499
* 11921A
Description
Description
Instant Change Knife
Item #
Item #
Description
Stanley Retractable Utility Knife
Item #
Description
11080
Stanley Safe Deposit Blade Disposal Container, Yellow
Stanley Replacement Blades
The original Stanley replacement
blades.
Item #
* 11921A
11111
11041
11988
11987
Description
Stanley Whittling Craft Replacement Blades, 30 per box
Stanley Replacement Pocket Knife Blade For 10049
Stanley Round Replacement Utility Blades 100 per pack
Stanley Replacement Blades 5 per pack
Knives
2 Handed Knife
Handsaver® Lock Blade
The true “workhorse” of the “L” series
heavy-duty cutters, this knife is designed
for two-handed operation on tough
cutting jobs. Extra length handle features
replacement blade storage in the handle
for convenience. Ratchet wheel blade lock
and a stainless steel blade channel holds
blade tight. Blade made from high quality
carbon tool steel is produced using OLFA’s
precise multi-step production process for
unparalleled sharpness and superior edge
retention. Long lasting durable snap-off
blade - a new sharp edge with each snap.
Guaranteed forever
This heavy-duty knife is part of the
Handsaver® Series featuring anti-slip
cushion grip handles. Handsaver®
handles provide premium comfort,
and maximum performance. Acetone
resistant, elastomer handle with a polyacetate locking mechanism, making it an
official acetone resistant cutter. Features
a ratchet blade lock and a heavy gauge
stainless steel blade channel that holds
blade tight. The high quality carbon tool
steel blade is produced using OLFA’s
precise multi-step production process
for unparalleled sharpness and superior
edge retention. Long lasting durable
snap-off blade - a new sharp edge with
each snap. Guaranteed forever.
Item #
Description
Item #
Description
NOL1
LBB-10
Olfa Hand Saver Safety Knife
Olfa Ultramax Blades 10 per pack
LL
LBB-10
Olfa Two Handed Knife Cutting Thicker Materials
Olfa Ultramax Blades 10 per pack
Compass Cutter
Heavy-duty compass cutter designed
to cut circles from approximately 3”
to 12” diameter. Easily adjusts to
accommodate users requirements.
For example, the this cutter is perfect
for scribing circles necessary for the
installation of recessed lighting in
addition to marking cardboard, mat board
and thin plywood. This knife uses extrasharp heavy-duty snap-off blades that
allow you to simply snap-off a dull cutting
edge and advance the new cutting
edge. Also the perfect cutter for making
half-moon wind vents in banners. Simply
cut 4” to 8” diameter 1/2 moon wind slits
in the center of the banner. Guaranteed
forever.
Item #
Description
CMP2
COB1
Olfa Compass Cutter
Olfa Compass Replacement Blades
Handsaver® Cushion Grip Knife
This retractable auto-lock utility knife helps
reduce injuries in the workplace. Features
elastomer on the handles for comfort and
control, a heavy gauge stainless steel blade
channel that holds blade tight, and a five
position retractable blade for application
specific requirements. The blade made
from high quality carbon tool steel is
produced using OLFA’s precise multistep production process for unparalleled
sharpness and superior edge retention.
Long lasting durable snap-off blade - a new
sharp edge with each snap. For right and
left handed use. Guaranteed forever.
Item #
Description
UTC1
SKB2
SKB2/50B
Olfa Auto-Lock Retractable Utility Knife - Heavy Duty
Olfa Replacement Knife Blades 5 Blades per pack
Olfa Safety Knife Replacement Blades 50 per pack
Blade Disposal Can
Olo® Rolling Scissors
Handy pocket-size can for quick and safe
blade disposal. Black plastic tambour door
opens and closes with one thumb for easy
disposal and securely covers the blade slot
when not in use preventing blades from
falling out. It’s easy to use, just slide open
the door to snap a new edge. Easily fits into
a pocket, toolbox, or designers workstation
and is perfect for use at construction
sites, industrial worksites, garages, art
departments, etc. For use with OLFA®
standard-duty (AB) and heavy-duty (LB)
snap-off blades and the Rounded Tip Safety
Blade (RSKB). Convenient 10 unit hanging
display.
Our patented rolling scissors easily and
safely cut straight lines on gift wrap,
paper, vinyl, film, and more. There
are no blades or sharp edges, and
the comfortable handle prevents hand
cramping and fatigue. It’s simple to use,
just push and roll to cut. The built-in
guide assures accurate cuts at any
length. Cuts multiple layers. Great for
kids too! For right and left handed use.
Unique roller bearings will not need
sharpening.
Item #
Description
Item #
Description
J102B
Olfa Rolling Scissor
DC1
Olfa Disposable Can
465
Knives & Scrapers
Hobby Knife
Retractable Knife
Light-duty, retractable knife with Quick-Point snapoff blades. Blade sections snap off providing fresh,
sharp cutting points. Removable blade snapper
included in cap of knife. Pocket clip included.
#1 Soft grip knife version for trimming
and high precision cutting.
Item #
Description
Item #
Description
10150
Stanley Slim Retractable Knife with Quick Point Snap Off Blades
TE01-014
Techni Edge Soft Handle Hobby Knife
Safety Knife
Economy Retractable Knife
Made of high-strength ABS plastic with razor-sharp
blades. Sturdy knives feature a locking blade
snapper. There’s always a sharp edge by breaking
off scored blade sections.
Item #
Description
UF2
Utility Knives Break-Off
Switchblade self retracting utility knife allows
blade exposure only when button is pressed
forward. Orange finish die cast zinc alloy
construction. 1 Heavy duty rounded tip blade
included. Rounded tip.
Item #
Description
42065
42102
Hyde Safety Knife
Hyde Replacement Blades, 100 per pack
Finger Twine Cutters
4” Scraper
4” wide blade saves time on large jobs. Removes paint
and stickers from glass and tile. Quick-release blade
change. Rugged, polypropylene construction resists
most paint thinners.
Twine knife, ring knife, finger knife and cutters
for food packaging and farming twines.
Item #
Description
TWKNF7
TWKNF8
TWKNF9
TWKNF10
TWKNF11
TWKNF12
TWKNF13
Twine Knife Ring Cutter Size 7
Item #
Description
28596
28597
Stanley 4” Glass & Tile Scraper 10 per box
Stanley 4” Scraper Blade Fits In # 28596 10 per box
Box Cutters
Scraper
Lightweight aluminum, compact
box cutter offers endless practical
applications. Features safe and easy
blade change and a glossy painted
finish. Uses standard single edge
blades. Tap open tap close.
4” wide blade saves time on large jobs.
Removes paint and stickers from glass
and tile. Quick-release blade change.
Rugged, polypropylene construction
resists most paint thinners.
Item #
Description
Item #
Description
28500
28510
Stanley 3-3/4” Retractable Razor Blade Scraper 10 per box
Stanley Straight Razor Blades 10 per pack
34270335
34270406
Replacement Blade For 34270406 Box Cutter, 100 per box
Box Cutter, 12 per case
466
Saws
Sharp Tooth Hand Saw
Predator Hand Saw
Aggressive multi-purpose saw for fast cutting. For use on
MDF, plasterboard, and all wood types. SharpTooth Saw
Technology uses three cutting surfaces to cut 50% faster than
conventional Stanley® Hand Saws. Induction hardened teeth
stay sharp 3 to 5 times longer than standard teeth. Back of
saw can be used to mark 45° and 90° angles (15-085), Total
length of 18” fits conveniently in most tool boxes (15-085).
Hardwood handle.
Ergonomic handle with rubber-coated grip for comfort
and control. Razor sharp diamond ground teeth for
easier cuts. Induction hardened Hard Point (H.P.)
teeth never need resharpening. Handle features
45/90 degree shape for marking angles. Length: 24” /
608mm; teeth per inch: 8; tooth style: standard/H.P.
Item #
* NSP1
Description
Nicholson 24” X 8 Point Hard Point Standard Cut Hand Saw
Hardtooth® Saw
Item #
Description
15087
Stanley Sharptooth Hand Saw with 20” Blade, 9 tpi
PVC Saws
Special square and miter feature built into saw handle
enables user to draw 45° and 90° lines using the back
of the blade. Induction hardened teeth stay sharp 3 to
5 times longer than standard teeth. Contoured sturdy
handle designed for comfort and control. Protective
full-length sleeve.
V tooth design enables straight cuts on both push and pull
saw strokes. Blade can be sharpened for extended use.
Pointed blade nose makes drywall surface penetration
easy. Ergonomic handle is interchangeable with most
popular PVC saw brands.
Item #
Description
Item #
Description
15350
Stanley Sharptooth Hand Saw with 26” Blade, 8 tpi
322013
322018
322113
322118
Greenlee 13” PVC Saw
Greenlee 18” PVC Saw
Greenlee 13” Replacement Blade For 322013
Greenlee 18” Replacement Blade For 322018
Keyhole Saw
4-way blade positioning cuts curves, circles, and frets
into places where ordinary hacksaws cannot reach.
Cuts wood, nails, metal lath, composition board, BX
cable, conduit, and more. Lightweight, pistol grip
handle. Comes with one wood-cutting blade and one
metal-cutting blade.
Item #
* 15275
Rubber Frame Hacksaw with
Guard
Rubber grip hacksaw, rigid steel frame with molded cushion
rubber grip handle, frame depth of throat is 3-1/2”, D-shape
handle, frame is adjustable for 8” (505 mm), 10” (255 mm) &
12” (305 mm) blades, allows blade to be faced in 4 directions,
furnished with 10” (255 mm) standard carbon steel blade.
Description
Stanley Small 4 Way Keyhole Saw
Jab Saw
Special saw always needed for the difficult jobs: those narrow
areas. Jab saw will work with any standard size hacksaw
blade. Can replace worn blade easily. Untighten adjusting
saw, remove worn blade and replace. Replace with a new
Nicholson® blade, retighten the adjusting screw.
Item #
Description
80969
Nicholson 10” Jab Saw with Blade
Item #
* 15265
* SF1214
* SF1218
* SF1224
SF1232
Description
Stanley Rubber Grip Hacksaw
Starrett Hacksaw Blade 12” X 1/2” 14 tpi
Starrett Hacksaw Blade 12” 24 tpi
Heavy Duty Hacksaw
Hacksaw
10-12” Adjustable open grip or close
grip heavy-duty hacksaw frame.
Item #
Item #
64147
* SF1214
* SF1218
* SF1224
SF1232
Description
Starrett Hacksaw Frame
333GR
* SF1214
* SF1218
* SF1224
SF1232
Description
Greenlee 12” Heavy Duty Hacksaw Frame
Adjustable Hacksaw
Wallboard Saw
Ergonomically designed curved handle is cushioned for
comfort. Fully hardened, tempered blade is designed
for long cutting life. Teeth are engineered to cut fast and
prevent clogging. Sharp tip makes plunge cuts easy.
Blade is epoxy-bonded to handle for a secure fit and
durability.
Item #
Description
15556
Stanley Cushion Grip Wallboard Saw, 6” Blade
Over-molded rugged design for heavy-duty use
and comfort. Fully-adjustable blade tension up
to 30,000 psi for longer blade life and faster,
accurate cuts. Alternative 45° blade mounting
allows for flush cutting. Mounting for most
reciprocating saw blades for extra versatility.
Handy blade storage in tubular frame. Convenient
front grip feature for two-handed sawing.
Complete with bi-metal blade (12”/24 tpi).
Item #
* 80951
* SF1214
* SF1218
* SF1224
SF1232
Description
Instantly adjustable for 10”/250 mm to
12”/300 mm blades. Adjusts 90° for
vertical or horizontal cuts.
Nicholson Adjustable Hacksaw 10” Or 12” Blade
467
Saws & Files
Band Saw
The Milwaukee
0729 Cordless
V28 Portable Band
Saw uses a high
powered Milwaukee
built motor to
deliver optimal
cutting speed
and performance.
Powering the 0729
is the revolutionary 28 volt lithium-ion battery
pack exclusively from Milwaukee. The 28 Volt
battery pack weighs less than an 18 Volt pack
yet delivers two times the run-time, expanding
the list of tools that can be driven on this
platform. The battery is positioned so that the
balance and line of sight to the cut are not
compromised. This band saw has the deep cut
capacity of 4-3/4”. x 4-3/4”. which makes this
tool extremely versatile and productive. The
variable speed trigger delivers optimal cutting
speeds of 0-225/0-350 surface feet per minute.
The LED light aids in making cuts in dark
places. A comfortable non-slip soft grip handle
provides a better gripping surface and reduces
operator fatigue.
Item #
072921
Description
Milwaukee V28 Ban Saw Kit
Band Saw Blades
Item #
Description
6FB
* 8FB
* 12512
16FB
10FB
Warrensville 6” Flat Bastard File
Description
ZWEP4410
ZWEP4414
ZWEP4418
ZWEP4424
Morse Bi-Metal Band Saw Blade 10 tpi 44-7/8”X1/2”X.02”, 3 per pack
Skroo-Zon File Handles
Steel die inside wood handle cuts its
own thread on file tang. For 6” (152
mm) files only.
Item #
T4
* T5
* T6
* T7
T8
Description
Skroo-Zon File Handle For 6” Files
Skroo-Zon File Handles For 14” Files
Auger
Bit File
American pattern auger bit file.
Designed to restore original
sharpness to cutting edges of
auger bits. Rectangular shape.
One end of file has uncut edges,
opposite has safe sides. Prevents
damage to surfaces adjacent to
those being filed. Made in 7”
length only.
Item #
Description
Nicholson 7” Auger Bit File
* 00258
Half Round
Bastard Files
Description
SCSS
Stihl Chain Sharpening
Nicholson, 8” x 3/16” round smooth chain saw file, black
diamond, spiral cut, American pattern, spiral cut enables
more material to be removed with each stroke, reducing
amount of strokes to produce keen edge, carded.
Item #
02215
02228
11018
* 11118
* 11518
56057735203
56057735503
Description
Nicholson 8” Flat Chain Saw File #18, 12 per box
Nicholson Round Chain Saw File, 8” X 5/32”
Chain Saw File, 8” X 3/16”
Chainw Saw File, 8” X 7/32”
Chain Saw File, 8” X 5/32”
Stihl 13/64” Double Cut Swiss Saw Chain File
Stihl 7/32” Chain Saw File 36 per box
Rounds
Bastard File
Principal use is to file circular openings or
concave surfaces. Tapered slightly towards
point. All 4”, 6”, 8” and 10” files are single cut.
12” Bastard and second cut are double cut, 12”
smooth is single cut. 14” Bastard is double cut.
Item #
Description
Item #
Description
6” Half Round Bastard File
Warrensville 8” Half Round Bastard File
* 4RB
* 8RB
* 12RB
* 10RB
* 6RB
Warrensville 4” Round Bastard File
468
Item #
Chainsaw File
Rounded with approximately a third of a round
on one side and double cut flat on the other.
Used for filing concave surfaces, enlarging large
holes, and making a corner radius.
* 6HRB
* 8HRB
10HRB
* 12HRB
* 13012
DiVal safety chainsaw sharpening
services are available for all your
chain sharpening needs.
Item #
Flat Bastard
File
Universally used by all machinists, this file is
recommended for fast stock removal where
a smooth finish is not required. In addition
to being double cut, it differs from the mill file
in that it is thicker in the cross section.
Chainsaw
Sharpening
Fit all standard portable band saw machines. Cut
pipe tubing and solids made of any machinable metal.
High speed steel is electron beam welded to a flexible
backer to create longer lasting, faster cutting blades.
Resistant to the effects of shock and heat.
Mill Bastard
File
Single cut, two square edges with teeth
and tapered. Often in conjunction with a
flat or hand file as a finishing file after the
“hogging off” operation. The name came
from their most common use in years gone
by, sharpening saws in lumber mills.
Item #
* 15010
* 15012
* 15018
* 15011
* 15013
* 15016
Description
Warrensville 10” Mill Bastard File
Putty Knives, Scrapers, Chisels, & Punches
MaxxGrip Putty Knives
MaxxGrip Scraper
High carbon steel blades. Full
tang blade construction. Blades
run straight from the working edge
through the handle. Ergo-engineered
soft-grip handles fit your fist and
reduce user fatigue.
Item #
Description
06100
06250
Hyde MaxxGrip 1.5” Flex Putty Knife, 5 per pack
Hyde MaxxGrip Hammer Head Heavy Duty Chisel Putty Knife, 1.25”
High carbon steel blades. Full
tang blade construction. Blades
run straight from the working edge
through the handle. Ergo-engineered
soft-grip handles fit your fist and
reduce user fatigue. Hammer Head®
end and nail setting end. 3”.
Item #
Description
06350
Hyde Maxi Grip 3” Flex Putty Knife, 5 per pack
Black & Silver Flexible Putty
Knives
Guaranteed forever. High carbon
Black & Silver Stiff Putty Knives
Guaranteed forever. High carbon
steel blade individually ground,
polished, mirror finished and clear
coated. Full tang blade construction.
Nylon projection interlock handle
resists most paint thinners.
steel blade individually ground,
polished, mirror finished and clear
coated. Full tang blade construction.
Nylon projection interlock handles
resist most paint thinner.
Item #
* 02000
02250
02550
02850
Description
Item #
Description
Hyde Putty Knife, 1.25”
Hyde Putty Knife, 2”
02050
02150
02300
02400
Hyde Putty Knife Stiff, 1.25”
Hyde Putty Knife Stiff, 1.5”
Hyde Putty Knife Stiff, 2”
Hyde Deluxe Scraper, 3”
Maxxbrass Brass Putty
Economy Cold Chisel
Solid brass, spring tempered. Full
tang construction. Blades individually
ground, mirror finished and clear
coated. Nylon projection-interlock
handle. Non-sparking, non-magnetic
blade for use in hazardous conditions.
Economy finish cold chisels. For
cutting, shaping and removing metal
softer than the cutting edge of the
chisel.
Item #
Item #
Description
02080
02320
Hyde Stiff Brass Putty Knife, 2”
Hyde Stiff Brass Putty Knife, 1.5”
* 701/2
* 705/8
* 703/4
Full Finish Cold Chisel
Description
Mayhew 70 Style Chisel, 1/2”
Extra Long Cold Chisel
For cutting, shaping and removing metal
softer than the cutting edge of the chisel.
Item #
Description
10201MAY
10202MAY
10204MAY
10205MAY
10209MAY
10212MAY
10216MAY
Mayhew 5/16” Cold Chisel
Excellent for cutting, shaping and
removing metal softer than the cutting
edge of the chisel.
Item #
* 1107/8
* 1103/4
Description
Pin Punches
Center Punch
For driving out and removing already
loosened pins and keys after initial
movement by center punch.
Full finish center punches for piercing,
marking or starting drills.
Item #
Description
24000
24001
24002
24003
24004
Mayhew 1/4” Center Punch
Item #
Description
21001
21002M
21005
Mayhew Full Finish Center Punch 5/16” Body Size, 3/32” Point
469
Pry Bars
Drift Pins
Steel Needle Bar
High-carbon steel for durability.
Rugged design for impact strength.
Strong, heat-treated points are
smooth and correctly tapered.
Corrosion resistant black finish.
Item #
* 66340
* 66342
* 66343
* 66344
60” steel bar with needle tip. 1” diameter.
Description
Item #
Description
Klein 9” Drift Punch with 1/8” Tip
7505060
Tamco 1” Diameter 60” Long Steel Needle Bar
Wrecking Bar
San Angelo Heavy Bar
Press forged and heat treated. Slotted chisel. Black finish. Variety of uses.
Choose size below.
Forged, tempered steel hardened for prying strength, toughness,
safety and longer service life. Point for breaking concrete and rock.
Chisel edge for straight-tine concrete breaking, smoothing of rough
edges, and prying.
Item #
Description
11748
Corona San Angelo Heavy Bar Point & Chisel Edge On Ends
Item #
Description
16636
166
Union Razorback 3/4” X 36” Wrecking Bar
3/4” X 18” Wrecking Bar
Gooseneck
Gooseneck wrecking bar. Gooseneck
end used for prying & removing nails.
Chisel end for lifting and prying.
Pry Bar
This square pry bar has a bent head
for better leverage and plastic handles
for better grip. The pry bar goes right
through the end of the handles so you
can use a hammer on it. 32” long.
Item #
Description
0065
Pry Bar 1”X 48” Hexagonal Steel with Point At End & Offset Flat
Connecting Bar
Item #
Description
41001
41004
Mayhew 705 18” Gooseneck Wrecking Bar 5/8” Body 6 per box
Mayhew 717 36” Gooseneck Wrecking Bar 3/4” Body 6 per box
Wonderbar
Forged, high-carbon steel for increased
strength and durability. Heat-treated
for increased durability. Polished and
beveled cutting edges. Contoured
bar makes pulling nails, prying, lifting
and scraping easier. Beveled nail slot
at both ends. High-visibility, powdercoated finish.
Item #
Description
55515
Stanley 12” Wonderbar Pry Bar, Black with Yellow End
Fatmax Xtreme Fubar
4-in-1 tool for prying, splitting, board bending and striking jobs. One
piece forged steel bar for increased durability. Two-tiered jaws for
grabbing common dimensional lumber & decking. Beveled nail
slot for pulling & prying nails. Textured grip for excellent comfort &
control, even when wet. Tempered steel that prevents chipping.
Provides extra leverage when positioning steel members and
aligning bolt holes. Forged fit-up bar is pointed on one end.
Chisel-end is straight.
Item #
Description
Item #
Description
3241
Klein 30” Connecting Bar. 3/4” Diameter
55099
Stanley Fatmax Xtreme Fubar Utility Bar, 18”
470
Hammers
Fiberglass 16 oz Hammer
Straight Claw Hammer
Forged high-carbon steel head.
Jacketed design provides overstrike
protection for long life and increased
safety. Rim temper reduces
incidences of chipping or spalling.
Fiberglass handle absorbs shock and
vibration. High-visibility yellow is easy
to locate quickly.
All steel construction. Forged in one
piece - fully polished. Exclusive nylonvinyl deep cushion grip.
Item #
Description
E320S
E322S
E324S
Estwing 20 oz Straight Claw Hammer with Nylon Grip Handle
Item #
Description
51110ST
Stanley Claw Hammer
Wood 16 oz Hammer
Wood 16 oz Hammer
Forged high-carbon steel head. Fully
heat-treated and polished bell face.
Hickory handle, rip claw.
Forged high-carbon steel head. Fully
heat-treated and polished bell face.
Hickory handle curved claw.
Item #
* 51616
Description
Item #
Description
Stanley 16 oz Claw Hammer with Wooden Handle
51352
Stanley 16 oz Ripping Hammer
Economy Fiberglass Hammer
Economy Wood Hammer
Choice of either curved or rip claw.
Hardwood handle is 16 oz.
Choice of either curved or rip clay. 16
oz fiberglass handle hammers.
Item #
* FG16C
* FG16S
Description
Item #
Description
16 oz Fiberglass Handle Claw Hammer
16 oz Fiberglass Handle Rip Straight Hammer
60034
60036
16 oz Hardwood Handle Claw Hammer
16 oz Hardwood Handle Rip Hammer
Brass Hammer
Ball Peen Hammer
This hammer has a forged high carbon
steel head and is designed for striking
cold chisels in cutting or chipping work
and metal forming.
Item #
Description
04002
02806
04416
04424
Ball Pein Hammer, 2 oz, 9-1/2” Length
Barco 16” Ball Pein Replacement Handle For 2 lb Hammers
Ball Pein Hammer with Fibreglass Handle, 16 oz
Ball Pein Hammer, 24 oz, 15-1/2” Length
3 lb non-sparking brass hammer with
wood handle.
Item #
705C
Description
Cook Non-Sparking Brass Hammer with Wooden Handle, 3 lb
471
Hammers
Lineman’s Double
Face Hammer
Item #
* 80936
Description
Designed for pole-line work. Rugged
and well-balanced, with the weight to
drive lag bolts. Forged, temperedsteel head is only 3-3/4” (95 mm) long
for use in tight areas. Identical faces
with 1-3/4” (44 mm) round-crown
driving surface and beveled edges.
Klein 36 oz Lineman’s Double Face Hammer 14” OAL
Drill Hammer
2 lb Sledge Hammer
2 lb double face sledge hammer is perfect for striking wood, metal, stone,
concrete, driving stakes and general striking use. Forged, heat treated and
tempered carbon steel head has dual machined striking faces and chamfers.
The tool is well balanced with a super durable 15” Nuplaglas® Classic
pultruded handle and comfort grip. Handle is weather, chemical and insectresistant. Lifetime handle warranty.
Item #
BD215
Description
Nupla 2 lb Sledge Hammer with 15” Handle
Short Handle
Sledge Hammer
For driving drilling bits and heavy
chisels. Forged steel head w/
chamfered edges for added durability.
10-1/2” lacquered Hickory handle for
strength.
Item #
* 30568
Description
Union 3 lb Drilling Hammer with Hickory Handle 10-1/2” OAL-USA
Hardened and Tempered drop
forge alloy steel head with mill face.
Hickory 16” handle.
Item #
Description
SLEDGE2
SLEDGE3
SLEDGE4
2 lb Sledge Hammer 15-1/2” OAL
3 lb Sledge Hammer 15-1/2” OAL
4 lb Sledge Hammer 16” OAL
24 oz Blacksmith Hammer
40 oz Blacksmith Hammer
Quality, steel forged head, hardened
and tempered. Durable, flat black
finish on head. Hickory handle.
Wood wedged for easy handle
replacement. Weight distribution
concentrated behind striking face for
added power.
Designed for striking wood or metal.
The cross peen issued for shaping and
bending metal.
Item #
Item #
Description
56402
Barco 3 lb Blacksmith Hammer 15-1/2” OAL
* 11524
Description
Plumb 40 oz Blacksmith Hammer with Wood Handle
Chipping Hammer Knife
40 oz Engineers Hammer
Forged from high-quality steel,
hardened and tempered. Durable, flat
black finish on head. Two precision
machined driving faces. Hickory
handle. Wood wedged for easy
handle replacement.
Item #
Description
11527
Plumb 14” 40 oz Double Faced Engineers Hammer
Item #
Description
15155
Klein Chipping Hammer Knife
Sledge Hammer
Dead Blow Hammer
Dead blow/anti-vibration framing
hammer. Hammer weight 40 oz, head
weight 28 oz, head material steel, face
milled handle length 14”, handle type
fiberglass with vinyl grip, overall length
16”.
Item #
Description
DBH44
Estwing Polyurethane Dead Blow Hammer with Vinyl Grip
472
Compact, lightweight knife for
opening lead cables. Rugged, forged
tempered cutlery steel blade. Sharp,
chisel-shaped edge. Hammer head
on back. Plastic-dipped handle for
comfort. Leather guard available,
catalog No. 5574S.
Hardened and tempered drop forge
alloy steel head with mill face.
Hickory 36” handle.
Item #
* SLEDGE6
* SLEDGE8
* SLEDGE10
* SLEDGE12
* SLEDGE16
* SLEDGE20
* SLEDGEH
Description
Union 6 lb Double Face Sledge Hammer with 36” Hickory Handle
Sledge Hammer 36” Replacement Handle
Hammers & Shovels
Razorback Long
Handle Shovels
Fiberglass Handle
Sledge Hammer
For transferring heavy, loose material. Largest openback industrial gauge, tempered steel blade. Rolled step
prevents material build-up. 48” premium northern white ash
handle.
Super durable Nuplaglas® handled large sledge hammers are built
for heavier jobs such as demolition, breaking up concrete, stone,
masonry, dry wall, driving stakes and fence posts, and dislodging
stuck objects. Forged, heat treated and tempered carbon steel
heads with dual machined striking faces and chamfers. Ergo
Power® injection-molded handles with solid pultruded fiberglass
cores provide safety and strength. The handles are weather,
chemical and insect-resistant. Lifetime handle warranty.
Item #
Description
* 27708
27712
27710
Nupla 8 lb Double Face Sledge Hammer with 32” Fiberglass Handle
42101
43201
Razorback “D” Handle Square Shovel
Razorback “D” Handle Round Shovel
44101
45519
For digging in hard and soft soils, the #2 round point hollow back
blades with forward turned step are heat treated and tempered
to resist wear and breakage. Ergo Power® injection molded
handles with solid fiberglass cores provide strength, safety and
durability. The handles are weather, chemical and insectresistant. Lifetime handle warranty.
For transferring heavy, loose material. Largest open-back
industrial, tempered steel blade. 30” premium northern white ash
handle. Steel and wood D-Grip for added strength.
Description
Description
Razorback Long Handle Square Shovel
Razorback Long Handle Round Shovel
Fiberglass Handle
Shovels
Razorback Shovels
Item #
Item #
Item #
Description
Nupla Round Point Fibreglass Long Handle Shovel
Nupla Round Point Fibreglass Short D-Handle Shovel, 27”
* 72016
72017
Fiberglass Handle
Shovels
Long Handle Shovels
For transferring sandy, light soils.
Rolled step prevents material
build-up. 48” White Ash handle for
strength.
For digging in hard and soft soils, the #2 hollow back blades
with forward turned step are heat treated and tempered to resist
wear and breakage. Classic® pultruded fiberglass handles with
comfortable D-grip provide strength, safety and durability. The
handles are weather, chemical and insect-resistant. Lifetime
handle warranty.
Item # Description
* 69027
69127
Nupla Round Point Fibreglass “D” Handle Shovel, 27” Handle
Nupla Square Point Fibreglass “D” Handle Shovel, 27” Handle
Item #
* 40184
* 40191
Description
Long Handle Square Shovel
Union Round Point 48” Long Handle Digging Shovel
Little Hog
D Handle Digging Shovel
For digging in sandy, light soils. Rolled step prevents material
build-up. 28” ash wood handle with poly D-grip.
Small compact round shovel. Perfect for
tight confined shoveling or in the trunk of
you car for emergencies.
Item #
Description
Item #
Description
43106
42106
Union Round Point 28” D Handle Digging Shovel
Union Industrial D Handle Square Shovel
45107
Union Razorback Little Hog
Round Point Mini Shovel
473
Shovels & Rakes
Deluxe Ice Scraper
Aluminum Scoop
Deluxe Ice Scraper for scraping ice
and other encrusted materials form
hard surfaces. 7” x 6” shank pattern,
forged, steel blade. 54” ash wood
handle. Shipping size 4.00” x 11.00”
x 55.00”.
For transferring grain, sand or snow
and general purpose clean up. #10
sized, 14-1/2” x 17-3/4” heavy-duty
aluminum blade. 29” ash wood
handle with steel and wood D-grip.
Item #
Description
Item #
Description
53132
Union Aluminum Scoop Shovel D-Handle
78202
Razorback Premier Forged Ice Scraper
D Handle Coal Shovel /
Street Shovel
For scooping grain, snow, mulch or
general purpose clean-up. #4 size,
14-1/2” x 15-1/2” wide-flared deep dish
steel blade. 39” ash wood handle with
steel and wood D-grip.
Steel Scoop Long Handle Shovel
general purpose clean-up. #2 Size,
11-1/2” x 14-1/2” steel blade. 46” ash
wood handle.
Item #
* 79805
Item #
* 79804
Description
This Remco indestructible shovel will outperform any
other shovel you’ve owned. It features a solid shaft
and an extra-thick scooping edge that wears evenly.
Non-sparking for safety in dusty areas and also meets
FDA & USDA requirements. One piece construction
makes this shovel sanitary. Built so tough, you can
drive a truck over it. 38” yellow shovel, with 11”x14”
scoop. USA made.
Plastic Scoop
Item #
6900SS
Item #
Description
79722
Plastic Scoop Shovel
Union Steel Scoop Shovel Long Handle
Non-Sparking Shovel
Union D Handle Coal Shovel / Street Shovel
general purpose clean-up. #12 size
equivalent, 14-3/4” x 18-3/4” poly
blade. 27” ash wood handle with poly
D-grip.
Description
Description
Remco Non-Sparking Shovel
Snoforce Aluminum Snow Shovel
For lifting and throwing light to medium
accumulations of snow. 18” x 15”
Aluminum blade with steel wearstrip
to prolong blade life. 38” Hardwood
handle with snow poly D-grip.
Drain Spade
For digging drainage ditches and
trenches. 14” open back tempered
steel blade with forward turned blade
step. 27” ash wood handle with poly
D-grip.
Item #
Description
47107
Union 27” Drain Spade Trenching Shovel with Ash Wood Handle
Steel Snow Shovel
Item #
Description
81113
Union Snoforce Aluminum Snow Shovel
Economy Ice Scraper
For scraping ice and other encrusted
materials from hard surfaces. 6” x 5”
Shank pattern, forged, steel blade.
48” ash wood handle.
Item #
Description
81102
Economy Ice Scraper
Level Head Rake
For lifting and throwing light
accumulations of snow. 18” x 15”.
Ribbed steel blade for added durability.
38” hardwood handle with snow poly
D-grip.
For spreading and leveling gravel.
16-Tine, 17-3/4” x 4” one-piece forged
head. 66” ash wood handle.
Item #
Description
Item #
Description
79214
Union 18” Steel Snow Shovel
63122
Union Razorback Level Head Rake
474
Rakes
Cultivator
Bow Rake
For cultivating, weeding and aerating
in industrial applications. 5” wide,
forged steel head with 4 sharp, curved
tines. 54” ash wood handle.
For loosening and leveling mulch,
peat moss and loose or heavy soils.
15-Tine, 16” x 3-1/4” one-piece forged
steel head. 60” ash wood handle.
Item #
* 63141
Description
Union Razorback Bow Rake
Item #
Description
68115
Razorback Forged Cultivator 4 Prong
Aluminum Landscape Rake
Asphalt Rake
For spreading and leveling asphalt
and tar. 14-Tine, 16” x 4” one-piece
forged steel head with long steel shank
to protect handle form heat. 60” ash
wood handle.
For spreading dirt, gravel and sand.
36” heavy-duty aluminum head with
bolted braces. 66” powder-coated
aluminum handle with 5-1/2” end grip.
Item #
* 63000
Description
Item #
Description
Union Tools 36” Aluminum Landscape Rake
63125
Union Asphalt Rake
Leaf Rake
Asphalt Rake
Fan-shaped head combines flexible
tines with durability of metal. Stress
distribution bar that prevents tines from
twisting or breaking when pressed on.
Coated frame and tines resist rust. 54”
Long wood handle.
For spreading and leveling asphalt
and tar. 36” heavy-duty aluminum
head with wrap-around bolted braces.
82” powder-coated aluminum handle
with 5-1/2” end grip.
Item #
Description
63133
Union 36” Aluminum Asphalt Lute
Item #
* RK24003
Description
Corona Spring Brace Rake 24” 24 Tines, 54” Handle
475
Shovels & Tree Trimming
Post Hole Digger
Post Hole Digger
For digging post holes and footings in all soil types. Atlas pattern,
two piece, riveted, high carbon steel blades with 5-1/2” point
spread and beveled digging edge. 48” Hardwood handles.
For digging post holes and footings in light, sandy soils. Atlas
pattern, one piece, high carbon steel blades with 5-1/4” point
spread and beveled digging edge. 42” Hardwood handles.
Item #
Description
Item #
Description
78101
Union Tools Post Hole Digger
78004
Union Razor-Back Post Hole Digger, 48” Hardwood Handle
Steel Bar Tamper
Hand Held Pruning Saw
Forged, tempered steel hardened for
prying strength, toughness, safety and
longer service life. Wide, thick blade for
efficient digging in dense, heavy and rocky
soils. Tamp for compacting soils around
fence posts, forms, etc.
Item #
For medium to large branches. 3-sided razor teeth. Impulse
hardened teeth for longer life. Replaceable 13” curved blade.
Tempered steel alloy. Cushioned pistol-grip handle with finger
hook.
Description
* BR71090
Corona 17Lb 69” Digging Heavy Tamp Bar & 2” Blade On Ends
12’ Arborist Tree
Pruning System
Item #
* RS7120
Description
Corona 13” Razor Tooth Pruning Saw
Machette
Forged steel alloy Radial Arc® blade with 1¾” diameter cutting capacity.
Compound-action dual-pulley system triples your cutting power. Fully
heat-treated, forged steel hook. 16” Razor Tooth Saw® blade and
quick-connect ferrule. Two 6’, high strength fiberglass pole sections can
be combined or used separately with saw and pruning head.
Item #
Description
TP6881
Corona Professional 12’ Arborist Tree Pruning System
Extension Poles
Tempered steel blade for greater strength and longer service
life. Heat treated to achieve maximum blade flexibility.
Resharpenable blade extends throughout the handle. Polished
and varnished surface. Co-molded handle with anti-slip
material.
Item #
* MA60042
* JE6
PHA11
PHA14
JE10
PS3FP
SB16TE
476
Wood Extension Pole. 6’ octagonal head section hardwood
pole, 1-1/4” diameter. For use with model nos. 102,103, or
3FG. Includes snap connectors-both ends for head poles and
other extension poles.
Description
Jameson 6’ Fibreglass Tree Trimmer Extension Pole
Jameson Pole Adaptor For #20 Pole Saw
Jameson Pole Adaptor For Marvin Pruner
Jameson 10’ Fibreglas Tree Trimmer Extension Pole
Jameson Heavy Duty Pole Saw Casting,Includes Adapter
Jameson 16” Tri-Edge Saw Blade
Corona 22” Machete with Tempered Steel Blade
Gilmour Wood
Extension Poles
At 1-1/4” diameter, the original JE Series foam core fiberglass pole is still
Jameson’s highest quality pole. Its strength-to-weight ratio is unmatched by
any pole on the market. In addition, it has increased flexural strength and a
moisture barrier for high dielectric protection(the ultimate in safety), making
it the right choice for line clearance. Every JE series pole is tested to 100KV
per foot for five minutes. Order PS3FPS1 complete head and saw to make
pruner. Or order PHA11 for gilmour heads and PHA14 for Marvin heads.
Item #
Description
Item #
Description
103S
Gilmour 1-1/4”X 6’ Hardwood Extension Pruning Pole
Tree Trimming
Marvin Pruner Head
Marvin Pruner Head
Pruner Head with strong round
casting, Fits all Marvin 1.25”
octagonal poles. PHA14 adapter
connect to JE6 Jameson Pole system.
Item #
Description
PH4R
PHA14
Marvin Pruner Head with Round Casting and Hardware
Jameson Pole Adaptor For Marvin Pruner
Pruner Head with strong round
casting. 10” fiberglass extension fits
onto 1.25” fiberglass extension poles
with female ferrule head.
Item #
Description
QCPF
Marvin Quick Change Pruner Head with Fiberglass Adapter
Marvin Saw Head with
Fiberglass Adapter
Marvin Pruner Head Pole
Powerful blades cut limbs up to
1.25 inches. Lightweight 1 lb 12 oz.
Precision ground hook. Angled edge
for a duel cut. Slim design for hard to
reach areas. Crafted from high grade
steel. Pruner head - round casting.
Lifetime Guarantee. Fits fiberglass
“head” poles.
Z-6FH (6’ fiberglass pruner head pole).
6’ Fiberglass pruner head pole (male
coupling & rope anchor).
Item #
Description
Item #
Description
QCSF
Marvin Saw Head with 10” Fiberglass Adapter
6FH
Marvin 6’ Fiberglass Tree Pruner Head Pole
Marvin Extension Poles
Z-6FB (6’ fiberglass base pole). 6’
Fiberglass base pole (female coupling
& rubber base).
Item #
Description
M6FB
Marvin 6’ Fiberglass Tree Trimmer Extension Pole
477
Adhesives & Teflon Tape
Economy Spray
Adhesive
High Performance
Spray Adhesive
Spray Adhesive Heavy Duty Web Spray is one of the highest
performance aerosol adhesives available. For both temporary or
permanent bonding, this high solids product is ideal for uneven
or porous surfaces and heavy materials. Waterproof, flexible,
transparent, and non-staining, use this product for your toughest
adhesive applications with materials such as leather, cardboard,
most plastics, polyethylene sheeting and cloth. Formulated with
the environment in mind, this product contains no chlorinated
solvents, carcinogens, or ozone depleters and cleans up easily with
mineral spirits. 20 net 12 oz can. Manufactured by Amrep I-Chem.
Item #
Description
SA398SUB
Economy Spray Adhesive, 12 per case
Spray Adhesives
Designed for temporary and permanent bonding (23.8 fluid
oz can). Low VOC for compliance with state regulations.
Applications may be used to bond fabric, fiberglass insulation,
plastic films, felt, rubber, leather, cork, paper, cardboard,
urethane foam, foil to metal, wood to wood and a variety
of other substrates. Features & Benefits include fast skin,
fast grab, low soak in spray adhesive. Formulated to bond
polyethylene to concrete block, wood and many other hard-tobond pieces. May be used to bond carpet and is ideal for label
applications. May be used for either permanent or temporary
bonds. Operating temperature range -10 to 180 d F.
Item #
Description
357
Nashua Spray Adhesive, 24 oz, 12 per case
Teflon Thread Seal
Excellent for label applications. Ideal for bonding carpet,
paper, cardboard, fabric, urethane foam, foil to metal, wood to
themselves and a variety of other substrates.
Twine knife, ring knife, finger knife and
cutters for food packaging and farming
twines.
Item #
Description
SA398
Nashua Economy Spray Adhesive, 12 per case
Thread Seal Tape
White, multi-purpose, non-adhesive thread seal tape.
Unhindered virgin polytetrafluoroethylene (PTFE)
self lubricates joints, making them easy to assemble
and disassemble for a leak proof seal. Product can
also be used on a number of other maintenance type
applications. Easy to assemble and disassesemble.
Used on a wide variety of maintenance applications.
3.5 mil thick and 3/4” x 260”.
Item #
Description
700035
3/4” X 260’ White Teflon Thread Seal Tape 509W Series
Item #
Description
700475
1/2” X 520’ White Teflon Thread Seal Tape 513W Series
Work Ties
Tough nylon cable ties in a variety of
sizes. Continuous locking threads let you
adjust to the exact length needed. Black
cable ties are ultraviolet resistant for
prolonged life. 10 bags of 100 per case.
Teflon Tape
Intertape Polymer 3/4” x 520” Teflon Tape. This
pure virgin teflon tape is a full 3.5 - 4 mil thick and
comes in as enclosed plastic spool which has an
unlimited shelf life. Since it is completely synthetic
and inert it can be used in a multitude of situations
including thread sealing on pipes, sprinkler systems,
plumbing lines and automotive work. Since this
tape does not react to the pipe nor does it get hard,
the fittings will always come apart easily.
Item #
Description
* TT
TT3/4
TT1
1/2” X 520” Teflon Tape
3/4” X 520” Teflon Tape
1” X 520” Teflon Tape
478
Item #
Description
CB04
CB07
CB11
CB14
CT04
CT07
CT14

Wrenches - DiVal Safety Equipment

Transcription

Similar documents

Paper Lanterns

New Products 2011 New Products 2011

These knives are from original stock we manufactured for Herter`s

1" Impact Wrench - Racine Railroad

GOING THE

Nordic Plow for Dixie Chopper Zee 2

012602 Art. VESPINO

Compact Shop Lights Locking Socket Extensions Hnuchle

kik-step®

Hello from Golden, Colorado: More than 30 years ago, Spyderco