docTRADEquip - lgtools.co.za
download 
Report Transcription
TRADEquip - lgtools.co.za
TRADEquip CONTENTS JACKS BOTTLE JACKS.............................................................................................................................................................................................. 3 OFF ROAD JACKS....................................................................................................................................................................................... 4 FLOOR JACKS.................................................................................................................................................................................................. 4 LONG CHASSIS SERVICE JACKS....................................................................................................................................... 5 RATCHETING AXLE STANDS..................................................................................................................................................... 6 LOW GEARBOX JACK........................................................................................................................................................................... 6 HYDRAULIC AND TELESCOPIC JACKS.................................................................................................................... 6 TELESCOPIC GEARBOX JACK................................................................................................................................................ 6 ENGINE CRANES & STANDS FOLDABLE ENGINE CRANE......................................................................................................................................................... 7 FIXED ENGINE CRANE........................................................................................................................................................................ 7 ENGINE HOLDER.......................................................................................................................................................................................... 7 ENGINE SUPPORT...................................................................................................................................................................................... 8 CREEPERS STEEL............................................................................................................................................................................................................................ 8 PLASTIC..................................................................................................................................................................................................................... 8 DRAINS OIL DRAIN............................................................................................................................................................................................................... 9 PARTS WASHERS PARTS WASHER ........................................................................................................................................................................................... PRESSES 10 HYDRAULIC SHOP PRESSES.................................................................................................................................................... 11 COIL SPRING COMPRESSOR COIL SPRING COMPRESSOR..................................................................................................................................................... 12 PIPE BENDERS PIPE BENDER WITH EXTERNAL PUMP..................................................................................................................... 12 HYDRAULIC PIPE BENDER........................................................................................................................................................... 12 BODY REPAIR KIT 10 TON PORTA POWER BODY REPAIR KIT......................................................................................................... 12 TYRE CHANGERS TYRE CHANGERS........................................................................................................................................................................................ 13 WHEEL BALANCERS MANUAL & ELECTRIC.......................................................................................................................................................................... 13 SAND BLASTING EQUIPMENT SAND BLASTING CABINETS...................................................................................................................................................... 14 SAND BLASTING POTS...................................................................................................................................................................... 14 HAND HELD SAND BLASTING GUN................................................................................................................................ 15 SAND BLASTING HOOD..................................................................................................................................................................... 15 CONVERSIONS 1 INCH - 25.4MM 1 GALLON - 3.785 LT 2 GARAGE equipment 1 Jacks YEAR WARRANTY 2.0 TON 5.0 10 TON 20 TON TON 30 TON 50 TON BOTTLE JACKS TOOJ951 TOOJ0504 TOOJ1004 TOOJ955 TOOJ956 TOOJ957 - 2T - 5T - 10T - 20T - 30T - 50T 6003751000835 6003398079560 6003398079577 6003751007681 6003751007698 6003751012227 Select proper jack size according to this chart: READ AND UNDERSTAND OPERATING INSTRUCTIONS BEFORE USE. Never go underneath a vehicle supported only by a jack. Use jack stands (also available in the TRADEquip range) immediately after lifting to support the vehicle should you intend going under the vehicle. Do not overload the jack beyond rated capacity. Use only on firm, stable, level surface. Do not move the vehicle while on a jack. Position on “lift up” areas of the vehicle as specified by the manufacturer. Do not make alterations to the jack. Failure to heed these warnings may result in injury and/or damage to the vehicle. Storage: Keep jack upright with release valve closed. Oil must be kept at correct level. ITEM RATED CAPACITY LIFTING RANGE MIN - MAX TOOJ951 2T 158 - 308mm TOOJ0504 5T 200 - 385mm TOOJ1004 10T 200 - 385mm TOOJ955 20T 235 - 440mm TOOJ956 30T 255 - 465mm TOOJ957 50T 285 - 465mm CAPACITY 2T 5T 10 T 20 T 30 T 50 T MIN. HEIGHT 158 MM 200 MM 200 MM 235 MM 255 MM 285 MM LIFT HEIGHT without screw 90 MM 125 MM 125 MM 145 MM 150 MM 180 MM LIFT HEIGHT with screw 150 MM 185 MM 185 MM 205 MM 210 MM N/A ADJ. HEIGHT 60 MM 60 MM 60 MM 60 MM N/A N/A Trade Brands SA TRADEquip 3 JACKS 1.5 METER 1.2 3.0 TON METER HEAVY 3.0 TON FLOOR JACK OFF ROAD JACKS •Do not exceed rated capacity • Use only on hard, level surface • Centre load on saddle •Use the jack stands as a matched pair to support one end of the vehicle only DUTY TOOJ1533 BARCODE: 6003398079669 QUICK LIFT One Pump Only 1.5 M TOOT2809 BARCODE: 6003398079270 1.2 M TOOT2808 BARCODE: 6003398079263 CAPACITY 48”/1200 MM 60”/1500 MM MIN. HEIGHT 154 MM 154 MM MAX HEIGHT 1070 MM 1350 MM MAX. LOAD 3 TON 3 TON WEIGHT 14 KG 15 KG DESCRIPTION CAPACITY MIN. HEIGHT 145 MM MAX. HEIGHT 500 MM 3.5 TON FLOOR JACK 3.5 TON RUBBER Saddle Pad TOOJ973 BARCODE: 6003398079638 •Safety bypass system prevents damage •Rubber saddle pad and handle bumper to protect the vehicle body • Robust steel frame • Low wheel base •Two-piece full length removable handle for convenient transportation and compact storage •Automatic overload protection system •Swivel rear castors for easy maneuverability •Dual pump for quick lift DESCRIPTION CAPACITY WORKING RANGE 105 - 485 MM GROSS WEIGHT 52.5 KG LENGTH 737.5 MM WIDTH INCLUDING CASTOR WHEELS 382.5 MM SADDLE Ø 140 MM LIFT HEIGHT 380 MM BASE HEIGHT 105 MM READ AND UNDERSTAND OPERATING INSTRUCTIONS BEFORE USE. • Do not overload unit beyond its rated capacity. Overloading may cause damage to the unit • This is a lifting device only. Load must be supported immediately by other appropriate means. • Do not move or dolly the vehicle while on the jack • Lift only on areas of the vehicle as specified by the vehicle manufacturer • Do not make any alterations to the jack • Failure to heed these warnings may result in loss of load and or personal injury or property damage. 4 GARAGE equipment 1 JACKS YEAR WARRANTY 2.0 1.5 TON TON •P olished & chromed cylinder rams enhanced by high performance seals. • Polished inner cylinder walls extend the life of the seals by minimising abrasion and wear 1.5 TON ALUMINIUM FLOOR JACK TOOJ974 BARCODE: 6003398079614 • 90 - 447mm working range • 19kg gross weight • Cast Aluminium frame • Great maneuverability • Safety bypass system prevents damage • Universal point release mechanism •Easy to carry •Automatic overload protection system •Ideal lift tool for repairing and maintaining your vehicle 3.0 TON 5.0 TON 10 TON HEAVY DUTY 2.0 TON ALUMINIUM FLOOR JACK TOOJ975 BARCODE: 6003398079621 • 85 - 460mm working range • 25kg gross weight • Cast Aluminium frame • Swivel rear castors for great maneuverability • Safety bypass system prevents damage • Universal point release mechanism •Easy to carry •Automatic overload protection system •Ideal lift tool for repairing and maintaining your vehicle LONG CHASSIS SERVICE JACKS 3.0 TON TOOJ1003 BARCODE: 6003398079676 5.0 TON TOOJ1105 BARCODE: 6003398079683 10.0 TON TOOJ1110 BARCODE: 6003398079690 CAPACITY 3T 5T 10 T MIN. HEIGHT 130 MM 150 MM 160 MM MAX HEIGHT 600 MM 560 MM 560 MM SADDLE STEEL STEEL STEEL WEIGHT 65 KG 87 KG 129 KG READ AND UNDERSTAND OPERATING INSTRUCTIONS BEFORE USE. Never go underneath a vehicle supported only by a jack. Use jack stands (also available in the range) immediately after lifting to support the vehicle should you intend going under the vehicle. Do not overload the jack beyond rated capacity. Use only on firm, stable, level surface. Do not move the vehicle while on a jack. Position on “lift up” areas of the vehicle as specified by the manufacturer. Do not make alterations to the jack. Failure to heed these warnings may result in injury and/or damage to the vehicle and/or jack. Trade Brands SA TRADEquip 5 axle stands & gearbox jacks WARNING Do not exceed rated capacity • Use on hard, flat and level ground only • Always use the vehicle manufacturer’s recommended lift points • Position the load at the centre of the saddle and release the jack slowly • Secure emergency brake before use • Always secure tyres which are not lifted off the ground • Make sure the stands and load are stable before attempting any work • Use the jack stands as a matched pair to support one end of the vehicle only 3.0 TON 6.0 TON 0.5 TON TELESCOPIC CYLINDER RAMS • Large foot base for added support RATCHETING AXLE STANDS • 4 Legged steel base combines integral bracing and welded corner supports for increased stability • Convenient handle & column release • Rigid construction - large saddle • Ductile iron rack automatically locks into position when raised • Safety ratchet design ensures stand remains locked under load Positive lock safely releases handle 3 TON TOOT2805 BARCODE: 6003751017246 6 TON TOOT2806 BARCODE: 6003751365255 CAPACITY 3T 6T MIN. HEIGHT 285 MM 370 MM MAX HEIGHT 425 MM 610 MM 0.5 TON TELESCOPIC GEARBOX JACK 0.5 TON TOOJ976 BARCODE: 6003398079751 • Low profile design assists use in constricted spaces • Castor wheels aid in portability around the work area 1.0 TON CAPACITY LOW GEARBOX JACK HYDRAULIC AND TELESCOPIC • Low profile design assists use in constricted spaces • Castor wheels aid in portability around the work area 0.5 TON TOOJ977 BARCODE: 6003398079768 1.0 TON TOOJ979 BARCODE: 6003398079775 CAPACITY 0.5 T 1.0 T MINIMUM HEIGHT 200 MM 190 MM MAXIMUM HEIGHT 670 MM 780 MM 6 GARAGE equipment 0.5 T MINIMUM HEIGHT 850 MM MAXIMUM HEIGHT 1790 MM 1 Engine Support YEAR WARRANTY 2.0 2.0 TON TON FOLDABLE LEGS 2.0 TON FOLDABLE ENGINE CRANE MCOC255 BARCODE: 6003398079713 • Ideal for moving, repairing, maintenence & assembly of engines • 4 Adjustable legs provide greater stability • Universal wheels provide easy maneuvering & positioning 2.0 TON FIXED ENGINE CRANE MCOC257 BARCODE: 6003751001542 • Ideal for moving, repairing, maintenence & assembly of engines • 4 Adjustable legs provide greater stability • Universal wheels provide easy maneuvering & positioning CAPACITY 2T CAPACITY 2T LIFTING HEIGHT 2380 MM LIFTING HEIGHT 2380 MM CRANE HEIGHT 1450 MM CRANE HEIGHT 1450 MM CRANE LENGTH 1550 MM CRANE LENGTH 1550 MM 0.5 0.9 TON TON 0.5 TON ENGINE HOLDER TOOT2800 BARCODE: 6003398079720 • Used for safe handling & positioning of automotive engines • Rotating head to easily position engine • Universal wheels provide easy manoevering & positioning 0.9 TON ENGINE HOLDER TOOT2804 BARCODE: 6003398079737 • Used for safe handling & positioning of automotive engines • Rotating head to easily position engine • Universal wheels provide easy manoevering & positioning CAPACITY 450 KG CAPACITY 900 KG OPERATING HEIGHT 800 MM OPERATING HEIGHT 815 MM Trade Brands SA TRADEquip 7 engine support & creepers 0.5 TON 0.5 TON ENGINE SUPPORT TOOT2812 BARCODE: 6003398079744 • Straddles inner fender wells to support engine • Adjustable to fit most vehicles • Rubber foot pads prevent damage and holds load securely CAPACITY 0.5 T LENGTH 1500 MM CREEPER CREEPER Steel TOOC115 BARCODE: 6003751011183 Plastic TOOC121 BARCODE: 6003751032362 8 LENGTH 914 MM LENGTH 914 MM NET WEIGHT 5.5 KG NET WEIGHT 4 KG GARAGE equipment 1 OIL DRAINS YEAR WARRANTY 80 80 LITER LITER 80 L OIL DRAIN 80 L OIL DRAIN • For drum use MCOS1012 BARCODE: 6003398079973 • Easy extraction of engine oil • Castors for easy maneuverability MCOS1011 BARCODE: 6003398079966 DESCRIPTION CAPACITY DESCRIPTION CAPACITY HEIGHT RANGE 103 - 170 MM HEIGHT RANGE 124 - 176 MM Trade Brands SA TRADEquip 9 PARTS WASHERS 75 75 LITER LITER 75 L REMOVABLE PARTS WASHER 75 L PARTS WASHER MCOS1010 BARCODE: 6003398079959 MCOS1008 BARCODE: 6003398079935 DESCRIPTION CAPACITY SOLVENT CAPACITY 45 L PUMP AND PARTS BASKET INCLUDED 150 LITER 150 L PARTS WASHER MCOS1009 BARCODE: 6003398079942 DESCRIPTION CAPACITY SOLVENT CAPACITY 90 L PUMP AND PARTS BASKET INCLUDED 10 GARAGE equipment DESCRIPTION CAPACITY TANK SIZE 710 X 482 X 940 MM PUMP AND PARTS BASKET INCLUDED 1 SHOP PRESSES YEAR WARRANTY 10 TON HYDRAULIC SHOP PRESSES MCOP1444 MCOP1445 MCOP1442 MCOP1446 MCOP1447 MCOP1448 CODE - 10T COMMON - 10T PROFESSIONAL - 20T BLACK JACK - 20T PROFESSIONAL - 30T PROFESSIONAL - 50T PROFESSIONAL 6003398079997 6003398080009 6003751001535 6003398081006 6003398081013 6003398081020 20 TON 30 TON 50 TON READ & UNDERSTAND OPERATING INSTRUCTIONS BEFORE USE. •D o not exceed the rated load capacity •B ase should always rest on a firm, level surface CAPACITY SHOP PRESS TABLE WIDTH WORKING RANGE MCOP1444 10 T COMMON TYPE WITH GUAGE 400 MM 0-980 MM ADJ. DIST. OF RAM MCOP1445 10 T SLIDE HEAD INDUSTRIAL TABLE TOP 400 MM 0-955 MM 180 MM MCOP1442 20 T SLIDE HEAD INDUSTRIAL 500 MM 0-1080 MM 145 MM MCOP1446 20 T SLIDE HEAD PROFESSIONAL 500 MM 0-925 MM 200 MM MCOP1447 30 T SLIDE HEAD PROFESSIONAL 530X142 MM 0-1030 MM 200 MM MCOP1448 50 T SLIDE HEAD PROFESSIONAL 615X272 MM 0-1100 MM 280 MM • Ideal for straightening, bending & pressing parts. • Pressure gauge shows working pressure Trade Brands SA TRADEquip 11 workshop equipment 1.1 12 TON TON 16 TON HYDRAULIC PIPE BENDER 12 TON MCOP1438 BARCODE: 6003751002556 SPRING COMPRESSOR TOOC259 BARCODE: 6003751032379 Read and understand operating instructions before use. Never exceed the stipulated capacity. Ensure all nuts are securely fastened before use. MAX SPRING LOAD 1.1 T COMPRESSED SPRING Ø 400 MM COMPRESSED LENGTH 210-570 MM 12 16 TON MCOP1437 BARCODE: 6003398079805 CAPACITY 12 T SHOE SIZES 12,19, 25, 31, 38 , 50 MM CAPACITY 16 T SHOE SIZES 12,19, 25, 31, 38 , 50, 63, 76 MM 10 TON TON TRIPOD STAND BLOW MOULD CASE WITH WHEELS PIPE BENDER WITH EXTERNAL PUMP MCOP1451 BARCODE: 6003398079980 CAPACITY 12 T SHOE SIZES 12,19, 25, 31, 38 , 50 MM 12 10 TON PORTA POWER BODY REPAIR KIT • 135mm Stroke of ram • 358mm Minimum height • Includes Pump & ram, Spreader, Flat base, Rubber head, Wedge head, 90º Comb head, Serrated saddle, Male connector, Ram toe, Plunger toe, 100/250/455/685mm Extension tubes • Variety of spreader accessories • Blow moulded case affords high protection to contents MCOJ973 BARCODE: 6003751002549 GARAGE equipment 1 YEAR WARRANTY TYRE CHANGERS & balancers 560 MM 560 MM TYRE CHANGER • Maximum rim: 560 mm TOOJ982 BARCODE: 6003398079416 660 MM 660 MM TYRE CHANGER • Maximum rim: 660 mm TOOJ983 BARCODE: 6003398079485 MANUAL WHEEL BALANCER ELECTRIC WHEEL BALANCER TOOJ984 BARCODE: 6003398079492 Trade Brands SA • Automatic Ruler TOOJ985 BARCODE: 6003398079508 TRADEquip 13 SAND BLASTING 30 90 LITRE LITRE 30 L SAND BLASTING CABINET 90 L SAND BLASTING CABINET • With foot pedal MCOS1000 BARCODE: 6003398079850 • Transparent plastic top door MCOS1001 BARCODE: 6003398079867 DESCRIPTION CAPACITY DESCRIPTION CAPACITY SAND CAPACITY 6 KG DIMENSIONS 66 X 53 X 49 CM CERAMIC NOZZLE 3.5 MM WORK SPACE 56 X 46 X 28 CM AIR CONSUMPTION 198 L/M AIR CONSUMPTION 145 L/M MIN COMPRESSOR 3 HP BELT DRIVE MIN COMPRESSOR 3 HP BELT DRIVE LIGHT & GLOVES INCLUDED 220 LIGHT, GLOVES AND GUN INCLUDED 90 LITRE LITRE 220 L SAND BLASTING CABINET • Heavy steel constructed frame • Transparent glass viewing window • Single door access MCOS1002 BARCODE: 6003398079874 90 L SAND BLASTING POT DESCRIPTION CAPACITY DIMENSIONS 138 X 87 X 63 CM WORK SPACE 145 X 87 X 63 CM AIR CONSUMPTION 708 L/M MIN COMPRESSOR 10 HP BELT DRIVE LIGHT, GLOVES AND GUN INCLUDED 14 • With handles MCOS1003 BARCODE: 6003398079881 DESCRIPTION CAPACITY TANK DIMENSIONS 304 MM Ø X 508 MM (H) AIR CONSUMPTION 708 L/M NOZZLE, PRESSURE GAUGE, SHUT OFF VALVE, CERAMIC NOZZLE, HOSE, FILLING FUNNEL, WATER TRAP AND HOOD GARAGE equipment 1 SAND BLASTING YEAR WARRANTY 106 0.9 LITRE LITRE 106 L SAND BLASTING POT • With vacuum MCOS1004 BARCODE: 6003398079898 DESCRIPTION CAPACITY TANK DIMENSIONS 380 MM Ø X 1041 MM (H) AIR CONSUMPTION 708 L/M BUILT IN VACUUM ELIMINATES MASK USAGE AND RECYCLES ABRASIVES FOR REUSE. SEPERATES ABRASIVES FROM DEBRIS HAND HELD SAND BLASTING GUN • With 4 functions • Lightweight plastic body • 4 Extra nozzles • 0.9L Tank MCOS1005 BARCODE: 6003398079904 HAND HELD SAND BLASTING GUN SAND BLASTING HOOD • With 4 nozzles: 2, 2.5, 3, 3.5mm • Single action ease of operation • Air inlet key wrench MCOS1006 BARCODE: 6003398079911 • Durable fabric • Large acrylic viewing window • Reinforced ventilation panels MCOS1007 6BARCODE: 003398079928 Trade Brands SA TRADEquip 15 Other Categories Available: AIRTOOLS & MACHINERY BATHROOM ACCESSORIES GARDENING TOOLS & MACHINERY HAND TOOLS HINGES, BOLTS, PADLOCKS, HANDLES ETC INDUSTRIAL MACHINERY POWERTOOLS & PRODUCTS SHELVING & BRACKETS WELDING MACHINES & ACCESSORIES L&G TOOLS & MACHINERY DISTRIBUTORS LTD 6 KYALAMI ROAD, WESTMEAD, PINETOWN 3610 TEL: (031) 717 6800 EMAIL: [email protected] www.lgtools.co.za L&G TOOLS & MACHINERY LTD IS NOT RESPONSIBLE FOR PRINTING ERRORS (E & EO) Copyright: This document remains the property of L&G Tools. This document is privileged and for the use of the recipient only. Unauthorized use, disclosure or copying of the contents of this document, or any similar action is prohibited. This restriction is applicable to all product catalogues, product images and design elements. Product Catalogues, product images and design elements remain the property of L&G Tools and their contents shall not be duplicated without written consent from L&G Tools Marketing.
