Metabox

Transcription

Metabox - Specialty Supplies

METABOX
A drawer system with endless possibilities
Perfecting motion
Table of contents
Page
METABOX drawer system
Blum, Inc. is a leading manufacturer of
functional hardware for the kitchen cabinet
and c ommercial c asegoods industries
specializing in concealed hinges and drawer
runner systems. Virtually all of the hardware
needed to assemble and make casegoods
functional are available within the wide range
of quality Blum products.
3
General specifications
4-5
320N specifications
6-7
320M specifications
8-9
320K specifications
10-11
320H specifications
12-13
330M specifications
14-15
330H specifications
16-17
Gallery rail and BOXSIDE specifications
18-21
Interior roll-out specifications
22-27
Blum’s manufacturing and distribution complex
in Stanley, North Carolina supplies the North
American markets through a network of more
than 150 dependable distributors. Wholly
owned by the Blum family, the company
was formed in 1952 by Julius Blum and is
headquartered in Hoechst, Austria.
METAFILE for METABOX
28
METABOX lateral stabilizer
29
METABOX pull-out surround specifications
30
Accessories
31-32
Global customer benefits
Assembly tools
33-37
Product development at Blum considers all of
the various customers who
will come in contact
with our products.
With this “Global
Customer Benefits”
philosophy we strive
to create advantages
for all users from the
cabinetmaker to the end consumer.
Drawer front overlay charts
38
Part number index
39
Blum, Inc. is ISO 9001 certified
which means that you are
assured of consistent quality
in every Blum product. What’s
more they exceed the requirements of ANSIBHMA standards for cycle life, static load and
self-closing performance. Contact your local
Blum representative for more details.
Blum testing criteria
Cycle life / Dynamic
load capacity test
Side pressure test
100,000 open/close cycles
with a total weight of 34kg
(75 lb.) on a 550mm (22")
drawer.
A force of 15kg (33 lb.) is
applied ten times to a fully
extended 550mm (22")
drawer.
kg
Static load capacity test
45.3kg (100 lb.) applied to
a half extended 550mm
(22") drawer for 1 minute.
Subject to technical modifications without notice. ©2007
kg
kg
METABOX drawer systems exceed ANSI/BHMA
requirements for a Grade 1 rating.
METABOX: The versatile drawer system
Efficient storage in contemporary styling
The spacious layout of this kitchen permits a
Virtually unlimited storage solutions are possible
METABOX 's design complements the style of
variety of customized storage solutions. From the
with the range of heights, lengths and optional
frameless cabinetry that has gained popularity
largest pot to the smallest bottle, everything has
accessories in the METABOX program. Within
because of its effective use of cabinetry interior
a place in the METABOX program. And with the
this comprehensive system, everything stored is
room. Since it is fully compatible with the 32mm
durable epoxy-coated drawer sides, this kitchen
easy to access and even small or bulky items are
cabinet construction system, the METABOX pro-
will keep its good looks for years to come.
handled with ease.
gram makes installation quick and precise.
Drawer fronts are quickly and
easily mounted.
Adjustments are fast, precise
and simple.
Tilt adjustment by turning the
gallery rails.
Gallery cross rails are easily
secured into position.
Subject to technical modifications without notice. ©2007
METABOX general specifications
Cabinet types and capacity
The METABOX drawer system can be
installed in either panel or face-frame constructed cabinets with optional rear mounting sockets.
METABOX drawers have a static load
capacity of 100 pounds and a dynamic
capacity of 75 pounds and are tested to
perform 100,000 open/close cycles without
failure.
Panel
Frame
METABOX drawers install in all cabinets
Example of METABOX load capacity
Available heights and colors
METABOX is available in four drawer
heights, offering a multitude of design
options. “C” drawers are available in cream
or white, while “C15” drawers are available
in white only.
150 (5-7/8")
118 (4-5/8")
White
86 (3-3/8")
54 (2-1/8")
N
Cream
H
K
M
Opening and closing information
BLUMATIC self-closing action results
from the angled drawer and cabinet
profiles.
320 series 3/4 extension drawers have
an extension loss when fully opened.
330 series full extension drawers have an
over extension of 18 (3/4") when fully opened.
Extension loss
Over extension
“C” version and the “C15” version
9 (3/8")
9 (3/8")
Use special
* system
screw
662.1150
Hole
for
system
screw *
Drawer
Bottom
9 (3/8")
METABOX “C” version
METABOX “C15” version
32
32
Ø5 x 12 typ.
(3/16" x 1/2")
371
Holes
for
prongs
18.5
Drawer
Back
(3/4")
Hole
for
system
screw *
(1-1/4")
Ø5 x 12 typ.
(3/16" x 1/2")
32
METABOX “C15” drawers can be manually
assembled (page 30), or with the METABOX
drilling guide (page 28).
(1-7/16") (1-1/4") (1-1/4")
Assembling METABOX “C” drawers
is quick and easy.
1
21 (13/16")
for interior
drawers
9 (3/8")
Boring for C15 drawer back and bottom
(for 13 (1/2") material, holes are 10 (3/8") deep)
Dimensions in millimeters (inch equivalents as noted)
Subject to technical modifications without notice. © 2007
i
Drawer Configurations
Components and accessories
Adjustable gallery rails
Rear gallery bracket
Gallery cross rail
Single gallery connector
Double gallery divider
Double gallery connector
Standard drawer
C15 series
Cabinet profile
Standard drawer with gallery organization
Drawer profile
Cover cap
Front fixing bracket
Interior front fixing bracket
Interior drawer front assembly
Pull-out surround shelf (top)
Interior roll-out trays (bottom)
Drawer front assembly
Drawer front adjustment
Side adjustment
3
Height and Tilt adjustment
SNAP
2
4
1
1. Insert front bracket
2. Snap closed
3. Insert gallery
4. Snap gallery back
2
3
2
1
Removal
1. Loosen fixing screws
2. Adjust front
3. Tighten screws
Removal
1
1. Adjust height cam
2. Turn rail to adjust tilt
METABOX 320N drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
(1/16")
Setback
Front fixing brackets
Cabinet Profile Length
D
C
B
A
37 (1-7/16")
3 (1-1/4")
9 (3/8") typ.
3 (1-1/4")
Runner sets (includes cabinet and drawer profiles)
C15 series
white
Nominal
Length
320N5500C
320N5500C15
(22")
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 517 (20-3/8")
320N5000C
320N5000C15
(20")
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 453(17-13/16")
320N4500C
320N4500C15
(18")
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16")
-
320N4000C
320N4000C15
(16")
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357(14-1/16")
-
320N3500C
320N3500C15
(14")
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4") 325(12-13/16")
-
(11")
277 (10-7/8")
270 (10-5/8")
229 (9")
320N2700C
Min. cabinet
Inside depth
Cabinet & drawer
Profile length
System screw mounting hole positions
C series
cream or white
A
B
-
C
-
D
-
Standard front fixing bracket
Screw-on
Nickel-plated steel
Press-in
ZSF.1510.04
Right
ZSF.1510.05
Left
ZSF.1610.04
Right
ZSF.1610.05
Left
Component specifications
Ins
ide
Bottom
op
de
si
In
en
ing
wid
g
in
en
op
th
Back
mi
w
nu
th
id
us
in
31
")
/4
-1
(1
in
us
2
(1
/1
6"
)
(3/1 Ø 5
6" x 12
x1
/2"
)
1-1
/4"
)
h
le
ng
t
p
ro
fil
e
ra
w
er
Pre-bore holes if
using system screws
D
(3/8 9
")
Drawer bottom
thickness
Profile length
1(
m
32 4")
-1/
32 4") (1
/
1
1
(
37 6")
/1
(1-7
s3
20.5
(13/16")
m
Ø
(3/1 5 x 12
6"x
1/2"
)
9
(3/8
")
Height
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Back
height
Bottom length
13 (1/2")
42 (1-5/8")
550 (21-5/8")
548 (21-9/16")
16 (5/8")
39 (1-9/16")
500 (19-11/16")
498 (19-5/8")
19 (3/4")
36 (1-7/16")
450 (17-11/16")
448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
270 (10-5/8")
268 (10-9/16")
Sid
loc e
atio
n
Front
Bo
locttom
atio
n
Bore Ø10 x 12 (Ø3/8" x 1/2") hole
for front fixing brackets with dowels
(Determine locations from specifications below,
or see page 38 for pre-determined overlays)
Installation specifications
Drawer
Front
Back
OL
V
55 (2-3/16")
20.5 (13/16")
Y
32
(1-1/4")
9 (3/8")
34.5
(1-3/8")
8.5 (5/16")
Ø10 x 12
(3/8"x1/2")
13.5
(9/16") min.
8.5 (5/16")
5 (3/16") min.3
24 (15/16")
min.
54 (2-1/8")
min.2
78 (3-1/16") min.1
Inside Opening
C15 series
prong
8.5 (5/16")
OL
X
For frame cabinet specifications please
see page 32
X
OL = Overlay
X = OL + 8.5 (5/16")
VV==Variable
Variablebottom
bottomthickness
thickness
minimum 13(1/2") material
Y = OL + 13.5 (9/16")
For gallery rail and BOXSIDE
specifications see page 19
For interior drawer specifications
see page 22
METABOX 320M drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
(1/16")
Setback
D
C
B
A
37 (1-7/16")
3 (1-1/4")
9 (3/8") typ.
3 (1-1/4")
Min. cabinet
Inside depth
Cabinet & drawer
Profile length
C series
cream or white
C15 series
white
Nominal
Length
320M5500C
320M5500C15
(22")
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 517 (20-3/8")
320M5000C
320M5000C15
(20")
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 453(17-13/16")
320M4500C
320M4500C15
(18")
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16")
-
320M4000C
320M4000C15
(16")
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357(14-1/16")
-
320M3500C
320M3500C15
(14")
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4") 325(12-13/16")
-
320M2700C
320M2700C15
(11")
277 (10-7/8")
270 (10-5/8")
229 (9")
Screw-on
A
B
C
-
-
Press-in
-
Clip-on front fixing bracket
ZSF.1700
Right
ZSF.1700
Left
Screw-on
Press-in
Nickel-plated steel
D
ZSF.1800
Right
ZSF.1800
Left
Nickel-plated steel
Nylon in
white*
Expando
ZSF.1200
Right
ZSF.1200
Left
ZSF.1300
Right
ZSF.1300
Left
ZSF.130E
Right
ZSF.130E
Left
ZAA.3700
Cover cap
Nylon in
white*
ZAA.3500
Cover cap
*Blum logo cover caps available
Ins
ide
Bottom
op
de
si
In
en
ing
wid
g
in
en
op
th
Back
mi
nu
w
th
id
31
")
/4
-1
(1
2
(1
/1
6"
)
20.5
32
(1-1/4") (13/16")
us
in
in
us
9
(3/8
")
(3/8 9
")
Material
thickness
Profile length
/4"
)
Pre-bore holes if
using system screws
D
ra
w
er
p
ro
fil
e
le
ng
t
h
m
32 4")
-1/
32 4") (1
/
1
1
(
37 6")
/1
(1-7
1(
1-1
Ø
(3/1 5 x 12
6"x
1/2"
)
m
(3/1 Ø 5
6" x 12
x1
/2"
)
s3
Height
(3/16" x 3/8") holes for
13 (1/2") material
Back
height
Bottom length
13 (1/2")
74 (2-15/16")
550 (21-5/8")
548 (21-9/16")
16 (5/8")
71 (2-13/16")
500 (19-11/16")
498 (19-5/8")
19 (3/4")
68 (2-11/16")
450 (17-11/16")
448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
270 (10-5/8")
268 (10-9/16")
Front
Sid
loc e
atio
n
Bo
locttom
atio
n
Bore Ø10 x 12 (Ø3/8" x 1/2") hole
Drawer
Front
Back
OL
20.5 (13/16")
Y
V
87 (3-7/16")
64 (2-1/2")
9 (3/8")
34.5
32
(1-3/8") (1-1/4")
8.5 (5/16")
Ø10 x 12
(3/8"x1/2")
13.5 (9/16") min.
8.5 (5/16")
5 (3/16") min.
24 (15/16")
min.
86 (3-3/8") min.
110 (4-5/16") min.
Inside Opening
C15 series
prong
8.5 (5/16")
OL
X
see page 32
X
OL = Overlay
X = OL + 8.5 (5/16")
V = Variable bottom thickness
Y = OL + 13.5 (9/16")
see page 23
METABOX 320K drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
(1/16")
Setback
D
C
B
A
37 (1-7/16")
3 (1-1/4")
9 (3/8") typ.
3 (1-1/4")
Min. cabinet
Inside depth
Cabinet & drawer
Profile length
C series
cream or white
C15 series
white
Nominal
Length
320K5500C
320K5500C15
(22")
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 517 (20-3/8")
320K5000C
320K5000C15
(20")
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 453(17-13/16")
320K4500C
320K4500C15
(18")
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16")
-
320K4000C
320K4000C15
(16")
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357(14-1/16")
-
320K3500C
320K3500C15
(14")
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4")
-
Screw-on
A
B
C
-
ZSF.1700
Right
ZSF.1700
Left
Screw-on
Press-in
Nickel-plated steel
Press-in
D
ZSF.1800
Right
ZSF.1800
Left
Nickel-plated steel
Nylon in
white*
Expando
ZSF.1200
Right
ZSF.1200
Left
ZSF.1300
Right
ZSF.1300
Left
ZSF.130E
Right
ZSF.130E
Left
ZAA.3700
Cover cap
Nylon in
white*
ZAA.3500
Cover cap
10
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
Bottom
op
en
de
si
In
ing
wid
g
in
en
op
th
Back
mi
nu
w
th
id
31
")
/4
-1
(1
)
(1
/1
6"
2
in
us
m
h
le
ng
t
p
ro
fil
e
ra
w
er
D
)
Pre-bore holes if
using system screws
Material
thickness
Profile length
/4"
Height
us
in
Ø
(3/1 5 x 12
6"x
1/2
")
9
(3/8
")
20.5
32
32
(1-1/4") (1-1/4") (13/16")
m
(3/8 9
")
1(
1-1
(3/1 Ø 5
6" x 12
x1
/2"
)
32 4")
-1/
32 4") (1
/
1
1
(
37 6")
/1
(1-7
s3
Back
height
Bottom length
13 (1/2")
550 (21-5/8")
548 (21-9/16")
16 (5/8")
103 (4-1/16")
500 (19-11/16")
498 (19-5/8")
19 (3/4")
100 (3-15/16")
450 (17-11/16")
448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
Front
Sid
loc e
atio
n
106 (4-3/16")
Bo
locttom
atio
n
Bore Ø10 x 12 (Ø3/8" x 1/2") hole
Drawer
Front
Back
OL
C15 series
prong
8.5 (5/16")
OL
X
see page 32
119 (4-11/16")
V
Y
64 (2-1/2")
20.5 (13/16")
9 (3/8")
34.5
32
32
(1-3/8") (1-1/4") (1-1/4")
Ø10 x 12
(3/8"x1/2")
45.5 (1-13/16")
min.
40.5 (1-5/8")
5 (3/16") min.
118 (4-5/8") min.
142 (5-9/16") min.
24 (15/16")
min.
8.5 (5/16")
Inside Opening
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 45.5 (1-13/16")
11
see page 24
METABOX 320H drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
(1/16")
Setback
D
C
B
A
37 (1-7/16")
3 (1-1/4")
9 (3/8") typ.
3 (1-1/4")
Min. cabinet
Inside depth
Cabinet & drawer
Profile length
C series
cream or white
C15 series
white
Nominal
Length
320H5500C
320H5500C15
(22")
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 517 (20-3/8")
320H5000C
320H5000C15
(20")
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 453(17-13/16")
320H4500C
320H4500C15
(18")
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16")
-
320H4000C
320H4000C15
(16")
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357(14-1/16")
-
320H3500C
320H3500C15
(14")
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4") 325(12-13/16")
-
Screw-on
A
B
C
ZSF.1700
Right
ZSF.1700
Left
Screw-on
Press-in
Nickel-plated steel
Press-in
D
ZSF.1800
Right
ZSF.1800
Left
Nickel-plated steel
Nylon in
white*
Expando
ZSF.1200
Right
ZSF.1200
Left
ZSF.1300
Right
ZSF.1300
Left
ZSF.130E
Right
ZSF.130E
Left
ZAA.3700
Cover cap
Nylon in
white*
ZAA.3500
Cover cap
12
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
Bottom
op
en
de
si
In
ing
wid
g
in
en
op
th
Back
mi
nu
us
in
31
")
/4
-1
(1
)
(1
/1
6"
2
in
us
p
ro
fil
e
le
ng
t
h
m
32 4")
-1/
32 4") (1
/
1
1
(
37 6")
/1
(1-7
ra
w
er
Pre-bore holes if
using system screws
D
(3/8 9
")
Material
thickness
Profile length
Bottom length
550 (21-5/8")
548 (21-9/16")
500 (19-11/16")
498 (19-5/8")
450 (17-11/16")
448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
)
Height
m
9
(3/8
")
/4"
20.5
32
32
32
(1-1/4") (1-1/4") (1-1/4") (13/16")
th
id
(3/1 Ø 5
6" x 12
x1
/2"
)
1(
1-1
w
Ø
(3/1 5 x 12
6"x
1/2
")
s3
13 (1/2")
Sid
loc e
atio
n
Front
Back
height
138 (5-7/16")
16 (5/8")
135 (5-5/16")
19 (3/4")
132 (5-3/16")
Bot
loc tom
atio
n
Bore Ø10 x 12 (Ø3/8" x 1/2") hole
Drawer
Front
Back
8.5 (5/16")
OL
X
see page 32
32 (1-1/4")
Hole spacing
V
34.5
(1-3/8")
151 (5-15/16")
64 (2-1/2")
Y
77.5 (3-1/16") min.
OL
C15 series
prong
9 (3/8")
20.5 (13/16")
Ø10 x 12
(3/8"x1/2")
72.5 (2-7/8")
5 (3/16") min.
150 (5-7/8") min.
174 (6-7/8") min.
24 (15/16")
min.
8.5 (5/16")
Inside Opening
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
13
see page 25
METABOX 330M drawer series
Drawer components
C15 series
Cabinet profile
Center profile
Assembly prongs
Drawer profile
20 (13/16")
Setback
D
C
B
A
37 (1-7/16")
9 (3/8") typ.
Min. cabinet
Inside depth
Cabinet & drawer
Profile length
C series
cream or white
C15 series
white
Nominal
Length
330M550PC
330M550PC15
(22")
565 (22-1/4")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 517 (20-3/8")
330M500PC
330M500PC15
(20")
515 (20-1/4")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 453(17-13/16")
330M450PC
330M450PC15
(18")
465 (18-5/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16")
-
330M400PC
330M400PC15
(16")
415 (16-5/16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357(14-1/16")
-
Screw-on
A
B
C
ZSF.1700
Right
ZSF.1700
Left
Screw-on
Press-in
Nickel-plated steel
Press-in
D
ZSF.1800
Right
ZSF.1800
Left
Nickel-plated steel
Nylon in
white*
Expando
ZSF.1200
Right
ZSF.1200
Left
ZSF.1300
Right
ZSF.1300
Left
ZSF.130E
Right
ZSF.130E
Left
ZAA.3700
Cover cap
Nylon in
white*
ZAA.3500
Cover cap
14
Ins
ide
Bottom
op
en
de
si
In
ing
wid
g
in
en
op
th
Back
mi
nu
w
th
id
31
")
/4
-1
(1
)
(1
/1
6"
2
in
us
9
(3/8
")
m
h
le
ng
t
p
ro
fil
e
(3/8 9
")
Material
thickness
Profile length
/4"
)
Pre-bore holes if
using system screws
D
ra
w
er
20.5
32
(1-1/4") (13/16")
us
in
32 4")
-1/
32 4") (1
/
1
1
(
37 6")
/1
(1-7
1(
1-1
Ø
(3/1 5 x 12
6"x
1/2"
)
m
(3/1 Ø 5
6" x 12
x1
/2"
)
s3
Height
(3/16" x 3/8") holes for
13 (1/2") material
Back
height
Bottom length
13 (1/2")
74 (2-15/16")
550 (21-5/8")
548 (21-9/16")
16 (5/8")
71 (2-13/16")
500 (19-11/16")
498 (19-5/8")
19 (3/4")
68 (2-11/16")
450 (17-11/16")
448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
Front
Sid
loc e
atio
n
Bo
locttom
atio
n
Bore Ø10 x 12 (Ø3/8" x 1/2") hole
Drawer
Front
Back
OL
20.5 (13/16")
Y
V
87 (3-7/16")
64 (2-1/2")
9 (3/8")
34.5
32
(1-3/8") (1-1/4")
23.5 (15/16")
Ø10 x 12
(3/8"x1/2")
13.5 (9/16")
min.
8.5 (5/16")
5 (3/16") min.
48 (1-7/8")
min.
54 (2-1/8")
min.
102 (4") min.
Inside Opening
C15 series
prong
8.5 (5/16")
OL
X
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 13.5 (9/16")
15
see page 26
METABOX 330H drawer series
Drawer components
C15 series
Cabinet profile
Center profile
Assembly prongs
Drawer profile
20 (13/16")
Setback
D
C
B
A
37 (1-7/16")
9 (3/8") typ.
Min. cabinet
Inside depth
Cabinet & drawer
Profile length
C series
cream or white
C15 series
white
Nominal
Length
330H550PC
330H550PC15
(22")
565 (22-1/4")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 517 (20-3/8")
330H500PC
330H500PC15
(20")
515 (20-1/4")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16") 453(17-13/16")
330H450PC
330H450PC15
(18")
465 (18-5/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389(15-5/16")
-
330H400PC
330H400PC15
(16")
415 (16-5/16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357(14-1/16")
-
Screw-on
A
B
C
ZSF.1700
Right
ZSF.1700
Left
Screw-on
Press-in
Nickel-plated steel
Press-in
D
ZSF.1800
Right
ZSF.1800
Left
Nickel-plated steel
Nylon in
white*
Expando
ZSF.1200
Right
ZSF.1200
Left
ZSF.1300
Right
ZSF.1300
Left
ZSF.130E
Right
ZSF.130E
Left
ZAA.3700
Cover cap
Nylon in
white*
ZAA.3500
Cover cap
16
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
Bottom
op
en
de
si
In
ing
wid
g
in
en
op
th
Back
mi
nu
w
us
in
31
")
/4
-1
(1
in
us
2
(1
/1
6"
)
9
(3/8
")
ra
w
er
p
ro
fil
e
le
ng
t
h
m
32 4")
-1/
32 4") (1
/
1
1
(
37 6")
/1
(1-7
1-1
Material
thickness
Profile length
Bottom length
550 (21-5/8")
548 (21-9/16")
500 (19-11/16")
498 (19-5/8")
450 (17-11/16")
448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
)
Pre-bore holes if
using system screws
D
(3/8 9
")
/4"
Height
m
(3/1 Ø 5
6" x 12
x1
/2"
)
1(
20.5
32
32
32
(1-1/4") (1-1/4") (1-1/4") (13/16")
th
id
Ø
(3/1 5 x 12
6"x
1/2
")
s3
13 (1/2")
Sid
loc e
atio
n
Front
Back
height
138 (5-7/16")
16 (5/8")
135 (5-5/16")
19 (3/4")
132 (5-3/16")
Bot
loc tom
atio
n
Bore Ø10 x 12 (Ø3/8" x 1/2") hole
Drawer
Front
Back
OL
X
20.5 (13/16")
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
32 (1-1/4")
Hole spacing
V
OL
8.5 (5/16")
151 (5-15/16")
64 (2-1/2")
Y
77.5 (3-1/16") min.
5 (3/16") min.
C15 series
prong
9 (3/8")
34.5
(1-3/8")
23.5 (15/16")
Ø10 x 12
(3/8"x1/2")
72.5 (2-7/8")
48 (1-7/8") min.
118 (4-5/8") min.
166 (6-9/16") min.
Inside Opening
17
see page 27
METABOX gallery rail and BOXSIDE systems
Gallery components
1
2
6
3
4
5
7
INSERTA gallery set
1
BOXSIDE
Includes 2 adjustable rails
2 rear fixing brackets
Colors: cream or white
ZRE.321S.ID
350 (14") drawer length
ZRE.371S.ID
ZRE.421S.ID
ZRE.471S.ID
ZRE.521S.ID
6
7
Gallery cross rail
2
1104 (44") long, cut to length
M (64mm high)
Color: white
Z36M367SE01
Z36M417SE01
Z36M467SE01
Z36M517SE01
H (128mm high) Color: white
Z36H367SE01
Z36H417SE01
Z36H467SE01
Z36H517SE01
Length = inside opening
width minus 60 (2-3/8")
ZRG.1104U
gallery cross rail
Gallery connectors
3
ZRU.00E0.01
ZRU.00Z0.01
4
5
ZRU.10B1E
Spring connector
Colors: dust gray
18
320N installation specifications
Drawer
Front
Back
Ø10 x 12
(3/8"x1/2")
OL
32 (1-1/4")
Hole spacing
34.5
(1-3/8")
Y
V
32
(1-1/4")
111 (4-3/8")
64 (2-1/2")
8.5 (5/16")
13.5
(9/16") min.
8.5 (5/16")
5 (3/16") min.
80 (3-1/8")
min.
54 (2-1/8")
min.
134 (5-1/4") min.
9 (3/8")
12.5 (1/2")
Inside Opening
8.5 (5/16")
C15 series
prong
X
OL
OL = Overlay
X = OL + 8.5 (5/16")
X
Y = OL + 13.5 (9/16")
For double gallery rail application add 64
(2-1/2") to opening and back height
320M installation specifications
Drawer
Front
Back
Ø10 x 12
(3/8"x1/2")
OL
C15 series
prong
8.5 (5/16")
OL
X
32 (1-1/4")
Hole spacing
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 13.5 (9/16")
19
(1-3/8")
34.5
Y
V
143 (5-5/8")
64 (2-1/2")
64 (2-1/2")
13.5 (9/16") min.
8.5 (5/16")
5 (3/16") min.
8.5 (5/16")
80 (3-1/8") min.
86 (3-3/8") min.
166 (6-9/16") min.
9 (3/8")
12.5 (1/2")
Inside Opening
METABOX gallery rail and BOXSIDE systems
320K installation specifications
Drawer
Front
Back
Ø10 x 12
(3/8"x1/2")
8.5 (5/16")
C15 series
prong
34.5
V
(1-3/8")
175 (6-7/8")
32 (1-1/4")
Hole spacing
64 (2-1/2")
64 (2-1/2")
OL
Y
40.5 (1-5/8")
5 (3/16") min.
45.5 (1-13/16")
min.
8.5 (5/16")
80 (3-1/8") min.
118 (4-5/8") min.
198 (7-13/16") min.
9 (3/8")
12.5 (1/2")
Inside Opening
X
OL
OL = Overlay
X = OL + 8.5 (5/16")
X
Y = OL + 45.5 (1-13/16")
320H installation specifications
Drawer
Front
Back
Ø10 x 12
(3/8"x1/2")
8.5 (5/16")
OL
X
34.5
V
(1-3/8")
207 (8-1/8")
Y
77.5 (3-1/16") min.
OL
C15 series
prong
32 (1-1/4")
Hole spacing
64 (2-1/2")
64 (2-1/2")
8.5 (5/16")
72.5 (2-7/8")
5 (3/16") min.
150 (5-7/8") min.
230 (9-1/16") min.
80 (3-1/8") min.
9 (3/8")
12.5 (1/2")
Inside Opening
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
20
330M installation specifications
Drawer
Front
Back
Inside Opening
12.5 (1/2")
Ø10 x 12
(3/8"x1/2")
32 (1-1/4")
Hole spacing
34.5
V
OL
Y
(1-3/8")
143 (5-5/8")
64 (2-1/2")
64 (2-1/2")
13.5 (9/16")
min.
8.5 (5/16")
5 (3/16") min.
23.5 (15/16")
112 (4-7/16") min.
54 (2-1/8")
min.
166 (6-9/16") min.
9 (3/8")
8.5 (5/16")
C15 series
prong
X
OL
OL = Overlay
X = OL + 8.5 (5/16")
X
Y = OL + 13.5 (9/16")
330H installation specifications
Drawer
Front
Back
Ø10 x 12
(3/8"x1/2")
OL
8.5 (5/16")
OL
X
32 (1-1/4")
Hole spacing
34.5
(1-3/8")
V
Y
77.5 (3-1/16") min.
5 (3/16") min.
C15 series
prong
207 (8-1/8")
72.5 (2-7/8")
64 (2-1/2")
64 (2-1/2")
23.5 (15/16")
112 (4-7/16") min.
118 (4-5/8") min.
230 (9-1/16") min.
9 (3/8")
12.5 (1/2")
Inside Opening
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
21
METABOX 320N interior drawer application
Drawer components
Bottom
s
In
Pre-bore holes for
use with METABOX
C15 prongs
id
e
i
en
op
ng
w
id
th
in
m
us
31
(1
1/
s
18
(1
1/
16
")
)
4"
(3/1 Ø 5 x
6"x 12
1/2
")
op
en
wid
th
Us
mi
nu
h
gt
le
n
ile
ro
f
p
ra
w
er
s6
4(
2-1
e1
6(
5/8
Front
") t
hic
/2"
)
kn
es
s
on
ly
Screw-on
ZIF.3010.02
Right
ZIF.3010.03
Left
ide
op
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
270 (10-5/8")
252 (9-15/16")
en
ing
wid
th
mi
Back
nu
s3
1(
1-1
Ø
(3/1 5 x 12
6"x
1/2"
)
Bottom length
532 (20-15/16")
Ins
61 (2-3/8")
ing
Profile length
550 (21-5/8")
/4"
9
(3/8
")
)
Bottom
material
thickness
Height
Interior front
fixing brackets
(3/8 9
")
20.5
(13/16")
ide
D
Ins
m
in
u
32 4")
-1/
32 4") (1
/
1
1
21 6") (
/1
(13
Pre-bore holes
if using system
screws
Nylon, white
Back
height
13 (1/2")
42 (1-5/8")
16 (5/8")
39 (1-9/16")
19 (3/4")
36 (1-7/16")
Drawer
Front
Back
V
55 (2-3/16")
20.5 (13/16")
34.5
(1-3/8")
8.5 (5/16")
18.5
9 (3/8")
(3/4")
61
(2-3/8")
49
(1-15/16")
8 (5/16") min.
24 (15/16")
min.
57 (2-1/4")
min.
81 (3-3/16") min.
Inside Opening
9
(3/8")
32
(1-1/4")
22
METABOX 320M interior drawer application
Drawer components
Bottom
s
In
Pre-bore holes for
use with METABOX
C15 prongs
id
e
i
en
op
ng
w
id
th
in
m
us
31
(1
1/
s
18
(1
1/
16
")
)
4"
(3/1 Ø 5 x
6"x 12
1/2
")
en
wid
th
Us
mi
nu
4(
2-1
e1
6(
5/8
Front
") t
hic
h
gt
le
n
ile
ro
f
/2"
)
kn
es
s
on
ly
ide
op
ing
wid
Right
ZIF.3000.03
Left
mi
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
270 (10-5/8")
252 (9-15/16")
Back
nu
s3
1(
1-1
20.5
32
(1-1/4") (13/16")
ZIF.3000.02
532 (20-15/16")
en
Ø
(3/1 5 x 12
6"x
1/2"
)
Bottom length
550 (21-5/8")
Ins
th
Screw-on
Profile length
s6
61 (2-3/8")
ing
p
(3/8 9
")
9
(3/8
")
Nylon, Colors:
cream or white
/4"
)
Bottom
material
thickness
Height
Interior front
fixing brackets
op
ra
w
er
ide
D
Ins
m
in
u
32 4")
-1/
32 4") (1
/
1
1
21 6") (
/1
(13
Back
height
13 (1/2")
74 (2-15/16")
16 (5/8")
71 (2-13/16")
19 (3/4")
68 (2-11/16")
Pre-bore holes
if using system
screws
Drawer
Front
Back
V
87 (3-7/16")
20.5 (13/16")
8.5 (5/16")
18.5
(3/4")
61
(2-3/8")
81
(3-3/16")
8 (5/16") min.
34.5
32
(1-3/8") (1-1/4")
9 (3/8")
24 (15/16")
min.
89 (3-1/2") min.
113 (4-7/16") min.
Inside Opening
9
(3/8")
32
(1-1/4")
23
METABOX 320K interior drawer application
Drawer components
Bottom
s
In
Pre-bore holes for
use with METABOX
C15 prongs
id
e
i
en
op
ng
w
id
th
in
m
us
31
(1
1/
s
18
(1
1/
16
")
)
4"
(3/1 Ø 5 x
6"x 12
1/2
")
ide
Interior front
fixing brackets
op
wid
th
mi
nu
4(
2-1
Us
5/8
Front
h
gt
le
n
ile
ro
f
/2"
e1
6(
p
s6
") t
hic
kn
es
)
so
nly
ide
op
ing
wid
th
mi
nu
ZIF.3030
Left
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
1(
Ø
(3/1 5 x 12
6"x
1/2
")
/4"
)
Bottom
material
thickness
9
(3/8
")
Height
Right
500 (19-11/16")
Back
s3
20.5
32
32
(1-1/4") (1-1/4") (13/16")
Screw-on
ZIF.3030
532 (20-15/16")
en
1-1
Bottom length
550 (21-5/8")
Ins
93 (3-11/16")
ing
ra
w
er
(3/8 9
")
en
Profile length
D
Ins
m
in
u
32 4")
-1/
32 4") (1
/
1
1
21 6") (
/1
(13
Back
height
13 (1/2")
106 (4-3/16")
16 (5/8")
103 (4-1/16")
19 (3/4")
100 (3-15/16")
Pre-bore holes
if using system
screws
Nylon, Colors:
cream or white
Drawer
Front
Back
20.5 (13/16")
34.5
32
32
(1-3/8") (1-1/4") (1-1/4")
V
32
119 (4-11/16")
17.5 (11/16")
9 (3/8")
(1-1/4")
93 (3-11/16")
113 (4-7/16")
8 (5/16") min.
121 (4-3/4") min.
145 (5-11/16") min.
24 (15/16")
min.
Inside Opening
9
(3/8")
32
(1-1/4")
24
METABOX 320H interior drawer application
Drawer components
Bottom
s
In
Pre-bore holes for
use with METABOX
C15 prongs
id
e
i
en
op
ng
w
id
th
in
m
us
31
(1
1/
s
18
(1
1/
16
")
)
4"
(3/1 Ø 5 x
6"x 12
1/2
")
op
ing
wid
th
mi
nu
h
gt
le
n
ile
ro
f
Profile length
s6
4(
2-1
Us
p
(3/8 9
")
en
Interior front
fixing brackets
ra
w
er
ide
D
Ins
m
in
u
32 4")
-1/
32 4") (1
/
1
1
21 6") (
/1
(13
/2"
)
e1
hic
kn
es
s
on
ly
ide
Screw-on
ZIF.3050
Left
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
op
en
ing
wid
th
Right
500 (19-11/16")
Ins
Ø
(3/1 5 x 12
6"x
1/2
")
ZIF.3050
532 (20-15/16")
9
(3/8
")
mi
nu
Back
s3
1(
1-1
/4"
)
Height
Front
") t
20.5
32
32
32
(1-1/4") (1-1/4") (1-1/4") (13/16")
5/8
125 (4-15/16")
6(
Bottom length
550 (21-5/8")
Bottom
material
thickness
Back
height
13 (1/2")
138 (5-7/16")
16 (5/8")
135 (5-5/16")
19 (3/4")
132 (5-3/16")
Pre-bore holes
if using system
screws
Nylon, Colors:
cream or white
Drawer
Front
Back
32 (1-1/4")
Hole spacing
34.5
(1-3/8")
V
151 (5-15/16")
64
20.5 (13/16")
17.5 (11/16")
9 (3/8")
(2-1/2")
125 (4-15/16")
145 (5-11/16")
8 (5/16") min.
153 (6") min.
177 (6-15/16") min.
24 (15/16")
min.
Inside Opening
9
(3/8")
32
(1-1/4")
25
METABOX 330M interior drawer application
Drawer components
Bottom
s
In
Pre-bore holes for
use with METABOX
C15 prongs
id
e
i
en
op
ng
w
id
th
in
m
us
31
(1
1/
s
18
(1
1/
16
")
)
4"
(3/1 Ø 5 x
6"x 12
1/2
")
en
wid
th
Us
mi
nu
4(
2-1
e1
6(
5/8
Front
") t
hic
h
gt
le
n
ile
ro
f
/2"
Bottom length
550 (21-5/8")
532 (20-15/16")
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
)
kn
es
s
on
ly
Ins
ide
op
en
ing
wid
th
Right
ZIF.3000.03
Left
Back
nu
s3
1(
1-1
20.5
32
(1-1/4") (13/16")
ZIF.3000.02
mi
Ø
(3/1 5 x 12
6"x
1/2"
)
Screw-on
Profile length
s6
61 (2-3/8")
ing
p
(3/8 9
")
9
(3/8
")
Nylon, Colors:
cream or white
/4"
)
Bottom
material
thickness
Height
Interior front
fixing brackets
op
ra
w
er
ide
D
Ins
m
in
u
32 4")
-1/
32 4") (1
/
1
1
21 6") (
/1
(13
Back
height
13 (1/2")
74 (2-15/16")
16 (5/8")
71 (2-13/16")
19 (3/4")
68 (2-11/16")
Pre-bore holes
if using system
screws
Drawer
Front
Back
20.5 (13/16")
34.5
32
(1-3/8") (1-1/4")
V
87 (3-7/16")
18.5
8.5 (5/16")
9 (3/8")
(3/4")
61
(2-3/8")
49
(1-15/16")
8 (5/16") min.
48 (1-7/8")
min.
57 (2-1/4")
min.
105 (4-1/8") min.
Inside Opening
9
(3/8")
32
(1-1/4")
26
METABOX 330H interior drawer application
Drawer components
Bottom
s
In
Pre-bore holes for
use with METABOX
C15 prongs
id
e
i
en
op
ng
w
id
th
in
m
us
31
(1
1/
s
18
(1
1/
16
")
)
4"
(3/1 Ø 5 x
6"x 12
1/2
")
op
ing
wid
th
mi
nu
h
gt
le
n
ile
ro
f
Profile length
s6
4(
2-1
Us
p
(3/8 9
")
en
Interior front
fixing brackets
ra
w
er
ide
D
Ins
m
in
u
32 4")
-1/
32 4") (1
/
1
1
21 6") (
/1
(13
/2"
)
Bottom length
550 (21-5/8")
532 (20-15/16")
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
e1
hic
kn
es
s
Ins
on
ide
ly
en
Screw-on
Right
ZIF.3050
Left
ing
wid
th
Ø
(3/1 5 x 12
6"x
1/2
")
ZIF.3050
op
9
(3/8
")
mi
nu
Back
s3
1(
1-1
/4"
)
Height
Front
") t
20.5
32
32
32
(1-1/4") (1-1/4") (1-1/4") (13/16")
5/8
125 (4-15/16")
6(
Bottom
material
thickness
Back
height
13 (1/2")
138 (5-7/16")
16 (5/8")
135 (5-5/16")
19 (3/4")
132 (5-3/16")
Pre-bore holes
if using system
screws
Nylon, Colors:
cream or white
Drawer
Front
Back
34.5
(1-3/8")
V
151 (5-15/16")
32 (1-1/4")
Hole spacing
17.5 (11/16")
64
(2-1/2")
125 (4-15/16")
8 (5/16") min.
113 (4-7/16")
48 (1-7/8") min.
121 (4-3/4") min.
169 (6-5/8") min.
9 (3/8")
20.5 (13/16")
Inside Opening
9
(3/8")
32
(1-1/4")
27
METAFILE for METABOX
Hanging rail accessories
METAFILE set
Includes components to make one
standard hanging file system
Includes:
1 (2) steel hanging rails (ZRM.550S)
1
2 zinc coated, 3 x 13 x 550
1
2
3
1
2
3
4
2
3
4
5
1
3
4
5
2
4
5
3
5
4
5
(4) rail support brackets (ZRM.0005.10)
synthetic, natural color
6
6
7
7
6
8
8
7
9
9
8
10
10
9
1
10
2
(4) rail support covers (ZRM.0003.10)
synthetic, cream or white
(2) glide profiles (ZRM.550G)
synthetic, cream or white, 550 length
(8) flathead wood screws (6064N)
nickel, #6 x 3/4"
3
1
4
1
2
5
2
3
1
3
4
2
4
5
3
5
4
ZRM.5500.US
5
METAFILE set
1
Lateral file accessories
6
ZRM.0004.10
7
86
97
ZRM.1100S
Steel hanging rail
zinc coated, 3 x 13 x 1100
cut to length
ZRM.1100G
Glide profile
synthetic, cream or white,
1100mm long, cut to length
6
8
10
7
9
8
10
9
10
2
Lateral bracket
synthetic, cream or white,
4 required per drawer
3
4
5
Centers:
Letter = 310 (12-3/16")
Legal = 386 (15-3/16")
14 (9/16")
320 series = 18 (11/16") min.
330 series = 10 (3/8") min.
Assembly and installation specifications
279 (11")
217 (8-9/16")
32
(1-1/4")
Letter = 310 (12-3/16")
Legal = 386 (15-3/16")
V
Minimum
Letter = 370 (14-9/16")
Legal = 446 (17-9/16")
28
a
METABOX lateral stabilizer
Additional stabilization for wide drawers
1
2
3
1
4
2
5
3
1
1
2
2
3
3
4
4
5
5
For use with1METABOX 330M and H series
full extension
2 drawers only.
Available for 3drawer lengths 550mm (22")
Linkage rod 4 can be cut according to
cabinet width.5
Suitable for cabinet widths up to 1200mm
(47"). Simple assembly of all components.
4
5
Does not increase load capacity.
Includes:
1 Gear racks, R & L
2 (2) pinion gears
3 Brackets, R & L
4 Linkage (1076mm)
5
7 (1/4") Setback
Minimum inside cabinet depth:
572 (22-1/2") for standard drawer
575 (22-5/8") for interior roll-out tray
37 (1-7/16")
ZST.550MH
165 (6-1/2")
261 (10-1/4")
398 (15-5/16")
526 (20-11/16")
L = Inside opening width
minus 86 (3-3/8")
330M specifications
330H specifications
29
82.5
(3-1/4")
118
(4-5/8") min.
150 (5-7/8")
32
(1-1/4")
18.5
(3/4")
32 (1-1/4")
54
(2-1/8") min.
86 (3-3/8")
29 (1-1/8")
32
(1-1/4")
32 (1-1/4")
29 (1-1/8")
Pull-out surround
For interior pull-out tray organization
1
1
&
2
2
3
3
4
4
5
5
Standard runner set:
L&R cabinet and drawer profiles
1
2
3
Drawer length
230M3500
350 (13-3/4")
230M4000
400 (15-3/4")
230M4500
450 (17-11/16")
230M5000
500 (19-11/16")
230M5500
550 (21-5/8")
4
5
1
1
2
2
3
3
4
4
5
5
1
6
21
2
31
ZTU.00Z0
3
42
4
53
ZRG.1104U
4
5
5
6
ZRU.00E0.01
ZRU.00Z0.01
7
Double corner support
7
8
6
Gallery rails, 1104 (44") long
cream or white, cut to length
9
7
10
8
9
10
8
1
2
1
3
2
4
3
5
4
5
Pull-out bottom dimensions
W = inside opening width minus 25 (1")
Deduct side spacer width if used
L = drawer profile length
9
10
For pull-out surround assembly
The pull-out surround drilling gauge enables
pre-boreing of the fixing positions for the
corner supports.
Includes:
(3) special Ø2.5 drill bits
(1) #2 Phillips, long screwdriver blade
Drilling gauge
2 (1/16")
Side gallery rail length = runner length minus 60 (2-3/8")
Front and back gallery rail lengths = interior cabinet width
minus 69 (2-11/16")
12.5 (1/2")
min.
30
(1-3/16")
51
(2")
87 (3-7/16")
30
(1-3/16")
22.5 (7/8")
4 (3/16")
Front
22.5 (7/8")
22.5 (7/8")
22.5 (7/8")
Double corner support
specifications
18 (11/16")
ZML.0010
Attach with 606N or 606P screws
30
a
METABOX accessories
POSI-STOP
Add-on device to keep drawer front from
contacting the cabinet face.
Assembly
Available in thicknesses of
1.5 (1/16") or 3 (1/8")
Synthetic, natural finish.
Non-handed, use two per drawer, snap in
place and secure with wood screw
Attach with 606N or
606P screws
1.5 or 3 gap
Will not work with rear
mount sockets (Part no.
602320), or on METABOX
330 series.
298.3210.01
1.5 (1/16") gap
298.3230.01
3 (1/8") gap
Drawer front support brackets
Add-on brackets for wide drawers to keep
the front tight to the drawer bottom.
Interior
pull-out trays
14 (9/16") min.
Standard
drawers
Drawer front
Stainless steel
Attach with 612TH screws
#6 x 1/2" trusshead
Drawer front
ZSB.0090.01
ZSB.0045.01
Drawer bottom
612TH screws
Drawer bottom
ZSB.0090.01
For standard drawers
ZSB.0045.01
For interior roll-out trays
612TH screws
Cabinet profile spacers
2
2
3
3
4
8
5
2
3
1
4
2
32 (1-1/4")
1
4
1
Without split dowel
To space runners away from the cabinet
side to clear door protrusion for interior
roll-out trays.
1
With split dowel
Two thicknesses available that can be stacked
up to 24 (15/16")
Synthetic, cream color
Heavy duty spacer
5
Use 661.1450 deep thread
system screw
4
5
3
1
4
1
2
5
8
19
(3/4
")
Use 661.1150 deep
thread system screw
or longer
Use #6 FH screw
that penetrates
cabinet side at
least 13 (1/2")
Important: Use spacers on front, middle and rear of
each cabinet profile for adequate support.
31
320M0188
8 (5/16") with Ø5 (3/16") x 11
dowel for linebore mounting
1
2
3
320M0048
4 (5/32") stackable
2
3
4
320M0088
8 (5/16") stackable
3
4
5
4
5
5
602750
32 (1-1/4") x 19 (3/4") Heavy duty
synthetic, white color
a
METABOX accessories
Universal drawer bracket
295.4000
Universal bracket kit (set of 4)
M4 ped
tapes
l
ho
79 (3-1/8")
30
(1-3/16")
32
(1-1/4")
1.5 (1/16")
62 (2-7/16")
30 (1-3/16")
68 (2-11/16")
Attach to cabinet with Blum 612TH screws,
#6 x 1/2" truss head
Zinc coated steel
Includes (8) M4 x 6 flathead machine screws
to attach runners to brackets
METABOX top mount
(320N shown)
")
1/2
(264 7/8")
(148 ")
8
(5/
16
Bottom mount (320N only)
13 (1/2")
For mounting Blum runners to the underside of a counter surface (pencil drawer)
or to the floor of a cabinet (roll-out tray).
32
(1-1/4")
68
(211/
16"
)
30
(1-3/16")
Rear mount sockets
For use with METABOX 320N, M, K, H
and all 230M runners in frame cabinets.
Synthetic, cream color
")
16
(7/
12 in.
m
Attach with Blum 612TH screws,
#6 x 1/2" trusshead
Series
602320
Left & right socket set
Cannot be used with METABOX 330 series or
in conjunction with POSI-STOP's.
Runner
position
2")
(1/
13
Socket
position
320N
66.5 (2-5/8")
35.5 (1-3/8")
320M
99.5 (3-15/16")
67.5 (2-11/16")
320K
131.5 (5-3/16") 89.5 (3-1/2")
320H
163.5 (6-7/16")
1/4"
er
nn
Ru ition
s
po
Socket
Chart
Position
min.
Front
Frame
131.5 (5-3/16")
Door protectors
For pull-out surrounds to prevent
damage to doors.
Space requirements
298.2200
15 (9/16")
min 34
(1-5/16")
230M runner
Attaches to the underside of the drawer.
For use with 230M runners only.
Epoxy coated steel with synthetic rollers,
cream color.
Door protector
32
METABOX assembly tools
METABOX layout templates
Cabinet Profile
Drawer & front
fixing bracket
METATEMP
Drawer
front
METATEMP layout templates provide a simple means for locating
the cabinet profile and front fixing bracket positions.
Included in each kit are five templates for 320N, 320/330M, 320K,
320/330H, and a gallery locator for all series.
e
Each template's height is the minimum cabinet opening size required.
To use, place on a side panel and mark the cabinet profile location.
Transfer the front fixing bracket location to the drawer front. For
linebored cabinets, insert a shelf pin through the template into the
system hole.
¨
METATEMP
Layout template kit
Drawer front marking gauges
1.
1
2.
2
3
4
5
4.
1 Standard marking gauge set
2
3
ZML.1500
For METABOX 320M, K, and H
4
ZML.1510
For METABOX 320N
5
1
1
3.
For marking all front fixing bracket positions including drawers with galleries.
2
Marking
3
1. Position gauges onto
closed
4 3-sided drawer.
2. Line
5 up the drawer front
and mark fixing positions
with a light tap on either
side.
2 Gallery marking gauge set
3
4ZML.8000.01
(2) rods with adjustable
5
marking gauges
3. Attach front fixing brackets
over the pin hole marks.
4. Attach INSERTA gallery rail.
METABOX drilling template
Ø10 drill bit
For manually boring all the holes
necessary to build a METABOX drawer.
Drilling template can be used for drawer front,
back and bottom. Locates all fixing points.
Ø5 (3/16") & Ø10 (3/8") stop collars included.
Ø10 (3/8") center punch included.
Marking or
boreing drawer front
ZML.0040
Ø5 drill bit
Boreing
drawer back
Boreing
drawer bottom
Drilling template set
Ø5 drill bit
33
DB-5mm
Ø5 (3/16") drill bit
DB-10mm
Ø10 (3/8") drill bit
MINIFIX
For precise positioning of cabinet profile
fixing screws.
For METABOX series 320N, M, K, H
For runners 230M
65.3300
MINIFIX
Adjustable calibrated drilling gauge
For determining cabinet profile
positions and pilot boring.
1
2
Drilling gauge can be used with assembled
or unassembled cabinets. Locates precise
and level fixing points of cabinet profiles.
Calibrated metric rail works with DynaPlan
for locating profile position.
3
4
5
1
2
3
Includes:
1 Clamp assembly
4
2 Templates
5
3 Calibrated rail, length 1000 (39")
4 Extension drill bit for Ø2.5 (1/8")
5
1
2
1
3
2
4
3
T65.5000.01
Drilling gauge set
4
DB-2.5mm
Ø2.5 (1/8") drill bit
5
5
1. Determine runner locations from DynaPlan or by manual calculation.
2. Set templates on the bar by the scale
3. Clamp assembly to the cabinet side.
5. Fasten runners to cabinet with wood screws.
6. Add screws to back of runner for added strength as required.
4. Bore Ø2.5mm pilot holes for front and middle mounting positions.
34
Machines
MINIPRESS P - Deluxe boring and insertion machine
Features:
■ Front adjustable boring distance
with digital calibration
■ Pneumatic hold-down clamps
■ Improved boring depth adjustment
■ Tool kit included
■ Dust collection attachment
■ Accepts optional 7 or 8 spindle boring heads
■ Improved positioning stops (4)
Single phase - 220V power
M53.1053.US
Three phase - 220V power
M53.1004.US
M53.1005.US
Laser center line optional.
Laser center line optional.
No laser center line option.
MINIPRESS P - Standard boring and insertion machine
Features:
M53.1053.UB
Single phase - 220V power
Laser center line, hold down clamps and digital calibration optional.
MINIPRESS M - 110V manual boring and insertion machine
Features:
■ 110V power with molded plug (portable)
■ Does not require pressurized air
■ 4 positioning stops included
110V power
M52.1056.US
Boring distance stop kit optional. No laser center line option.
MINIDRILL P -Standard boring machine
Features:
Single phase- 220V power
M53.1053.50
Optional hold down clamps, laser center line and digital calibration.
M53.1004.50
Optional hold down clamps, laser center line and digital calibration.
Optional hold down clamps and digital calibration. No laser center line option.
35
M53.1005.50
MINIPRESS boring heads
7-spindle
For line boring with the MINIPRESS.
8-spindle
The 7-spindle head bores 7 holes 32mm
apart, parallel to the fence. The 8-spindle
head bores 8 holes 32mm apart, perpendicular to the fence. Bores for all METABOX front
fixing brackets and galleries.
MZK.1000.US
7 spindle boring head
MZK.8000.US 8 spindle boring head
Drill bits
Ø5mm drill bit
Drill bits for the MINIPRESS/MINDRILL
and boring heads.
Ø10mm drill bit
M01.ZB05.D2
Ø5mm drill bit (right hand)
M01.ZB05.D3
Ø5mm drill bit (left hand)
M01.ZB10.02
Ø10mm drill bit (right hand)
M01.ZB10.03
Ø10mm drill bit (left hand)
Installation tools
For location and insertion of front fixing
brackets.
1
Insertion ram
2
1
Three spindle locator enables the positioning of
the drawer front without using fence stops.
3
2
Three spindle
4
3
locator
5
4
5
MZM.0092.01
Drill fixing holes
1
2
1 Insertion ram for MINIPRESS
2 for ZSF.1300 and ZSF.1800
Insert front fixing brackets
1
3
Knock-in tool
4
3
1
MZR.2000
3
5
ZME.1600
4
5
1
4
2
Three spindle locator
2
5
3
2
ZME.1610
3
4
1
Knock-in tool
4
5
2
for ZSF.1300 and ZSF.1800
5
3
Knock-in tool
4
for ZSF.1610
5
36
MINISTICK fence stop
Enables fast setup for drawer front boreing
and front fixing bracket insertion with the
MINIPRESS.
Eliminates the need for multiple fence stops.
1
Includes:
2
1 LH & RH adj. stick mechanism
2 (2) Upper drawer stops
3 (2) Bottom drawer stops
3
Boreing drawer fronts
4
1
5
2
MZS.0040
4
21
5
32
43
3
MINISTICK
1
54
4
5
5
Essential tool for production boring of drawer
fronts when using DynaPlan software.
Inserting front fixing brackets
POZI DRIVER and bits
A POZI screwdriver (different from Phillips)
is the most crucial tool you can use to assure
that full torque is applied to all Blum adjustment screws. POZI screws can be identified
by the distinctive “tick” marks located in the
center of the screwhead recess.
POZI DRIVER
#2 POZI DRIVER
BIT HOLDER
1/4" magnetic bit holder
POZI BIT #2x1 #2 x 1" POZI bit insert
Screws and bumpers
Drawer bumpers
Cushions drawer closing
Self-adhesive back, clear
Deep thread system screws
Pilot bore Ø5 (3/16") hole
Nickel plated
Deep thread wood screws
606N/P
612TH
FX4041
6 (1/4") dia. x 1.5 (1/16") thk.
661.1150
11.5 (7/16"), #2 POZI
606N
#6 x 5/8", #2 Phillips, nickel plated
SJ5312
10 (3/8") dia. x 3 (1/8") thk.
661.1300
13 (1/2"), #2 POZI
606P
#6 x 5/8", #2 POZI, nickel plated
661.1450
14.5 (9/16"), #2 POZI
662.1150
11.5 (7/16"), #2 POZI, small head
612TH
#6 x 1/2", #2 Phillips, zinc plated
for C15 METABOX assembly
37
METABOX drawer front overlay charts
Determining front fixing bracket locations
32 (1-1/4")
N height
METABOX
Sid
loc e
atio
n
Bot
loc tom
atio
n
64 (2-1/2")
M, K & H height
METABOX
Side location
Ø10 x 12
(3/8"x1/2")
Screw or
boreing
location
Side
overlay
Side
location
13 (1/2")
21.5 (13/16")
14 (9/16")
22.5 (7/8")
16 (5/8")
24.5 (15/16")
17.5 (11/16")
26 (1")
19 (3/4")
27.5 (1-1/16")
For overlays not shown please refer to
specification pages 6-17 to calculate
hole locations
Side
overlay
Bottom location
Ø10 x 12
(3/8"x1/2")
Bottom
overlay
Bottom
location
Bottom
overlay
Screw or boreing location
K
H
13 (1/2")
26.5 (1")
N and M
58.5 (2-5/16")
90.5 (3-9/16")
14 (9/16")
27.5 (1-1/16")
59.5 (2-3/8")
91.5 (3-5/8")
16 (5/8")
29.5 (1-3/16")
61.5 (2-7/16")
93.5 (3-11/16")
17.5 (11/16")
31 (1-1/4")
63 (2-1/2")
95 (3-3/4")
19 (3/4")
32.5 (1-5/16")
64.5 (2-9/16")
96.5 (3-13/16")
For overlays not shown please refer to specification pages 6-17 to calculate
hole locations
38
i
Part number index
Part No.
Page No.
230M3500
30
320N5500C
6
SJ5312
37
230M4000
30
320N5500C15
6
T65.5000.01
34
230M4500
30
330H400PC
16
Z36H367SE01
18
230M5000
30
330H400PC15
16
Z36H417SE01
18
230M5500
30
330H450PC
16
Z36H467SE01
18
295.4000
32
330H450PC15
16
Z36H517SE01
18
298.2200
32
330H500PC
16
Z36M367SE01
18
298.3210.01
31
330H500PC15
16
Z36M417SE01
18
298.3230.01
31
330H550PC
16
Z36M467SE01
18
320H3500C
12
330H550PC15
16
Z36M517SE01
320H3500C15
12
330M400PC
14
ZAA.3500
8, 10, 12, 14, 16
320H4000C
12
330M400PC15
14
ZAA.3700
8, 10, 12, 14, 16
320H4000C15
12
330M450PC
14
ZIF.3000.02
23, 26
320H4500C
12
330M450PC15
14
ZIF.3000.03
23, 26
320H4500C15
12
330M500PC
14
ZIF.3010.02
22
320H5000C
12
330M500PC15
14
ZIF.3010.03
22
320H5000C15
12
330M550PC
14
ZIF.3030
24
320H5500C
12
330M550PC15
14
ZIF.3050
25, 27
320H5500C15
12
602320
32
ZME.1600
320K3500C
10
602750
31
ZME.1610
36
320K3500C15
10
606N
37
ZML.0010
30
320K4000C
10
606P
37
ZML.0040
33
320K4000C15
10
612TH
37
ZML.1500
33
320K4500C
10
65.3300
34
ZML.1510
33
320K4500C15
10
661.1150
37
ZML.8000.01
33
320K5000C
10
661.1300
37
ZRE.321S.ID
18
320K5000C15
10
661.1450
37
ZRE.371S.ID
18
320K5500C
10
662.1150
37
ZRE.421S.ID
18
320K5500C15
10
BIT HOLDER
37
ZRE.471S.ID
18
320M0048
31
DB-2.5mm
34
ZRE.521S.ID
320M0088
31
DB-5mm
33
ZRG.1104U
320M0188
31
18
36
18
18, 30
DB-10mm
33
ZRM.0004.10
28
320M2700C
8
FX4041
37
ZRM.1100G
28
320M2700C15
8
M01.ZB05.D2
36
ZRM.1100S
28
320M3500C
8
M01.ZB05.D3
36
ZRM.5500.US
320M3500C15
8
M01.ZB10.02
36
ZRU.00E0.01
18, 30
320M4000C
8
M01.ZB10.03
36
ZRU.00Z0.01
18, 30
320M4000C15
8
M52.1056.US
35
ZRU.10B1E
18
320M4500C
8
M53.1004.50
35
ZSB.0045.01
31
320M4500C15
8
M53.1004.US
35
ZSB.0090.01
320M5000C
8
M53.1005.50
35
ZSF.1200
8, 10, 12, 14, 16
320M5000C15
8
M53.1005.US
35
ZSF.1300
8, 10, 12, 14, 16
320M5500C
8
M53.1053.50
35
ZSF.130E
8, 10, 12, 14, 16
320M5500C15
8
M53.1053.UB
35
ZSF.1510.04
6
320N2700C
6
M53.1053.US
35
ZSF.1510.05
6
320N2700C15
6
M53.1056.US
35
ZSF.1610.04
6
320N3500C
6
METATEMP
33
ZSF.1610.05
320N3500C15
6
MZK.1000*US
35
ZSF.1700
8, 10, 12, 14, 16
320N4000C
6
MZK.8000*US
35
ZSF.1800
8, 10, 12, 14, 16
320N4000C15
6
MZM.0092.01
36
ZST.550MH
29
320N4500C
6
MZR.2000
36
ZTU.00Z0
30
320N4500C15
6
MZS.0040
37
320N5000C
6
POZI BIT #2x1
37
320N5000C15
6
POZI DRIVER
37
39
28
31
6
Information is also available on these other Blum products:
• AVENTOS lift systems
• Blum Concealed hinges: CLIP top, CLIP, MODUL, and COMPACT
• BLUMOTION for doors
• DYNAMIC SPACE
• Machine and assembly aids
• ORGA-LINE organization system
• POCKET DOOR hardware
• STANDARD drawer runners
• SOLO concealed runners
• TANDEM concealed runners
• TANDEMBOX plus BLUMOTION drawer system
Blum, Inc.
7733 Old Plank Rd.
Stanley, NC 28164
toll free 800-438-6788
local 704-827-1345
fax 704-827-0799
internet www.blum.com
www.dynamicspace.us
3020.06.07
© 2007 Printed in USA

Metabox - Specialty Supplies

Transcription

Similar documents

METABOX – pull-out system