METABOX

METABOX
METABOX
A drawer system with endless possibilities
www.blum.com
METABOX — The versatile drawer system
2
Efficient storage in
contemporary styling
With METABOX, Blum offers an economical steel drawer for different
application options in the kitchen, bathroom and office.
Contents
4
METABOX drawer system
6
General specifications
8
320N specifications
10
320M specifications
12
320K specifications
14
320H specifications
16
330M specifications
18
330H specifications
20
Gallery rail and BOXSIDE specifications
24
Interior roll-out specifications
30
METAFILE for METABOX
31
METABOX lateral stabilizer
32
METABOX pull-out surround specifications
33
Accessories
35
Assembly tools
40
Drawer front overlay charts
41
Part number index
3
Virtually unlimited
storage solutions are possible
From the largest pot to the smallest bottle, everything has a place in the METABOX program, and
with the durable epoxy-coated drawer sides, this kitchen will keep its good looks for years to come.
The METABOX program has a wide range of heights, lengths and optional accessories available.
Within this comprehensive system, everything stored is easy to access and even small or bulky
items are handled with ease.
METABOX’s design complements the style of frameless cabinetry that has gained popularity
because of its effective use of cabinetry interior room. Since it is fully compatible with the 32 mm
cabinet construction system, the METABOX program makes installation quick and precise.
Features & benefits
■ Application possibilities
■ Contemporary design
■ Three-dimensional front adjustment
■ Easy cam height adjustment
■ Simple insertion and removal
■ With BLUMATIC self-closing feature
4
Testing standards
Blum, Inc. is ISO 9001 certified which means that you are assured of consistent quality in every Blum product. What’s more, they
exceed the requirements of ANSI/BHMA standards for cycle life, static load and self-closing performance. Contact your local
Blum representative for more details.
Blum testing
Dynamic wear test
Static load test
lb
Side pressure test
lb
lb
100,000 open/close cycles with a total load
of 75 lb on a 550 mm drawer.
100 lb applied to a half extended 550 mm
drawer for one minute.
A force of 33 lb is applied 10 times to a fully
extended 550 mm drawer.
ANSI/BHMA A 156.9-2003 testing
Static load test
Standard duty cycle test
lb
lb
The standard duty static load test with a static load exceeding 150 lb
on a 450 mm drawer. (exceeds grade 1)
The standard duty cycle test tested to 100,000 cycles at 10 cycles
per minute with 100 lb initial load on a 450 mm drawer.
(exceeds grade 1)
Quick assembly and adjustments
Drawer fronts are quickly and
easily mounted.
Adjustments are fast, precise
and simple.
Tilt adjustment by turning the
gallery rails.
5
Gallery cross rails are easily
secured into position.
General specifications
Cabinet types and capacity
METABOX drawers install in all cabinets
The METABOX drawer system can be installed in either panel or face frame constructed
cabinets with optional rear mounting sockets.
METABOX drawers have a static load capacity of 100 lbs and a dynamic capacity of 75 lb
and are tested to perform 100,000 open/close cycles without failure.
Panel
Frame
Available heights and colors
150 (5-7/8")
118 (4-5/8")
86 (3-3/8")
White
Cream
54 (2-1/8")
N
M
H
K
METABOX is available in four drawer heights, offering a multitude of design options. “C” drawers are available in cream or white, while “C15”
drawers are available in white only.
Opening and closing information
Extension loss
BLUMATIC self-closing action results from
the angled drawer and cabinet profiles.
320 series 3/4 extension drawers have an
extension loss when fully opened.
Over extension
330 series full extension drawers have an over
extension of 18 (3/4") when fully opened.
“C” version and the “C15” version
Ø5 x 12 typ.
METABOX “C15” version
%SBXFS
#BDL
9
32
)PMF
GPS
TZTUFN
TDSFX
9
*Use special
system screw
662.1150
Ø5 x 12 typ.
Assembling METABOX “C” drawers is quick
and easy.
Subject to technical modifications without notice. © 2009
METABOX “C15” drawers can be assembled
with the aid of the METABOX boring template
(page 35).
6
32
)PMF
GPS
QSPOHT
32
%SBXFS
#PUUPN
37
)PMF
GPS
TZTUFN
TDSFX
18.5
METABOX “C” version
9
9
Boring for C15 drawer back and bottom
(for 13 (1/2") material, holes are 10 (3/8") deep)
i
Drawer configurations
Components and accessories
Standard drawer
Adjustable gallery rails
Rear gallery bracket
Gallery cross rail
Single gallery connector
Double gallery divider
Double gallery connector
Standard drawer with gallery organization
C15 series
Cabinet profile
Drawer profile
Cover cap
Pull-out surround shelf (top)
Interior roll-out trays (bottom)
Front fixing bracket
Interior front fixing bracket
Interior drawer front assembly
Drawer front assembly
Drawer front adjustment
Side adjustment
Height and tilt adjustment
3
4
2
2
1
2
1
1
1 Insert front bracket
2 Snap closed
3 Insert gallery
4 Snap gallery back
3
Removal
Dimensions in millimeters (inch equivalents as noted)
1.
1 Loosen fixing screws
2.
2 Adjust front
3.
3 Tighten screws
Removal
7
1.1 Adjust height cam
2.
2 Turn rail to adjust tilt
METABOX 320N drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
2 (1/16")
Setback
Front fixing brackets
Cabinet profile length
D
C
B
A
37 (1-7/16")
9 (3/8") typ.
32 (1-1/4")
32 (1-1/4")
Runner sets (includes cabinet and drawer profiles)
Min. cabinet
Inside depth
Cabinet & drawer
Profile length
System screw mounting hole positions
C15 series
white
Nominal
Length
320N5500C
320N5500C15
22"
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
517 (20-3/8")
320N5000C
320N5000C15
20"
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
453 (17-13/16")
C series
cream or white
A
B
C
D
320N4500C
320N4500C15
18"
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
—
320N4000C
320N4000C15
16"
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357 (14-1/16")
—
320N3500C
320N3500C15
14"
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4") 325 (12-13/16")
320N2700C
—
11"
277 (10-7/8")
270 (10-5/8")
229 (9")
Standard front fixing bracket
Nickel-plated steel
Part no.
Right
Screw-on
Press-in
Subject to technical modifications without notice. © 2009
ZSF.1510.04
Left
ZSF.1510.05
Right
ZSF.1610.04
Left
ZSF.1610.05
8
—
—
—
—
Component specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
op
en
wid
In
th
d
si
e
mi
op
nu
en
id
w
th
m
in
us
31
/
-1
(1
4"
Back
m
in
us
2
(1
/1
6"
)
)
20.5
(13/16")
g
(3/1 Ø5 x
6" x 12
1/2
")
s3
1(
1-1
in
Ø5
(3/1 x 12
6"x1
/2")
9
(3/8
")
(3/8 9
")
Profile length
550 (21-5/8")
pr
ofi
le
D
ra
w
er
Bottom
Drawer bottom
thickness
Sid
locae
tion
Bottom length
548 (21-9/16")
Bot
locatom
tion
500 (19-11/16") 498 (19-5/8")
450 (17-11/16") 448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
270 (10-5/8")
268 (10-9/16")
)
Pre-bore holes
if using system
screws
le
ng
th
32 4")
-1/
32 4") (1
/
1
1
37 6") (
7/1
(1-
/4"
Height
ing
Front
Back height
13 (1/2")
42 (1-5/8")
16 (5/8")
39 (1-9/16")
19 (3/4")
36 (1-7/16")
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 40 for pre-determined overlays)
Installation specifications
Drawer
Inside opening
OL
C15 series
prong
8.5 (5/16")
OL
X
9
0-0WFSMBZ
90-
:0-
34.5
(1-3/8")
V
:
32
(1-1/4")
9 (3/8")
55 (2-3/16")
8.5 (5/16")
13.5
(9/16") min.
8.5 (5/16")
5 (3/16") min.
54 (2-1/8") 24 (15/16")
min.
min.
78 (3-1/16") min.
Ø10 x 12
(3/8"x1/2")
20.5 (13/16")
Back
Front
V = Variable bottom thickness minimum
13 (1/2") material
For frame cabinet specifications
page 34
For gallery rail and BOXSIDE specifications
page 20
For interior drawer specifications
page 24
Dimensions in millimeters (inch equivalents as noted)
9
METABOX 320M drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
2 (1/16")
Setback
Cabinet profile length
D
Front fixing brackets
C
B
A
37 (1-7/16")
9 (3/8") typ.
32 (1-1/4")
32 (1-1/4")
Runner sets (includes cabinet and drawer profiles)
Min. cabinet
Inside depth
System screw mounting hole positions
C series
cream or white
C15 series
white
Nominal
Length
Cabinet & drawer
Profile length
320M5500C
320M5500C15
22"
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 517 (20-3/8")
320M5000C
320M5000C15
20"
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 453 (17-13/16")
320M4500C
320M4500C15
18"
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
—
320M4000C
320M4000C15
16"
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357 (14-1/16")
—
320M3500C
320M3500C15
14"
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4") 325 (12-13/16")
—
320M2700C
320M2700C15
11"
277 (10-7/8")
270 (10-5/8")
229 (9")
Standard front fixing bracket
A
—
Right
Screw-on
ZSF.1700
Left
ZSF.1700
Right
ZSF.1800
Left
ZSF.1800
Press-in
EXPANDO
D
—
ZSF.1200
Left
ZSF.1200
Right
ZSF.1300
Left
ZSF.1300
Right
ZSF.130E
Left
ZSF.130E
Cover cap
Cover cap
Nylon white
—
Nickel-plated steel
Part no.
Right
Press-in
C
Clip-on front fixing bracket
Nickel-plated steel
Screw-on
B
Nylon white
NOTE: Blum logo cover caps available
ZAA.3700
ZAA.3500
Subject to technical modifications without notice. © 2009
NOTE: Blum logo cover caps available
10
Component specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
op
d
si
ing
wid
e
th
op
en
in
mi
g
w
th
m
us
31
/
-1
(1
4"
2
(1
/1
6"
)
)
550 (21-5/8")
m
in
us
le
ng
th
pr
ofi
le
Sid
locae
tion
Bottom length
548 (21-9/16")
Bot
locatom
tion
500 (19-11/16") 498 (19-5/8")
450 (17-11/16") 448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
270 (10-5/8")
268 (10-9/16")
/4"
)
Back
Pre-bore holes
if using system
screws
D
ra
w
er
Bottom
(3/8 9
")
Profile length
9
(3/8
")
20.5
32
(1-1/4") (13/16")
Ø5
(3/1 x 12
6"x1
/2")
in
32 4")
-1/
32 4") (1
-1/
1
(
7
3
6")
7/1
(1-
s3
1(
1-1
id
(3/1 Ø5 x
6" x 12
1/2
")
nu
Height
In
en
Material
thickness
Back height
13 (1/2")
74 (2-15/16")
16 (5/8")
71 (2-13/16")
19 (3/4")
68 (2-11/16")
Front
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 40 for pre-determined overlays)
Installation specifications
Drawer
Inside opening
V
64 (2-1/2")
Y
OL
C15 series
prong
8.5 (5/16")
OL
X
X
OL = Overlay
90-+ 8.5 (5/16")
Y = OL + 13.5 (9/16")
34.5
32
(1-3/8") (1-1/4")
9 (3/8")
87 (3-7/16")
8.5 (5/16")
Ø10 x 12
(3/8"x1/2")
13.5 (9/16") min.
8.5 (5/16")
5 (3/16") min.
24 (15/16")
min.
86 (3-3/8") min.
110 (4-5/16") min.
Front
20.5 (13/16")
Back
V = Variable bottom thickness minimum
For frame cabinet specifications
page 34
For gallery rail and BOXSIDE specifications
page 20
For interior drawer specifications
page 24
Dimensions in millimeters (inch equivalents as noted)
11
METABOX 320K drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
2 (1/16")
Setback
Cabinet profile length
D
Front fixing brackets
C
B
A
37 (1-7/16")
9 (3/8") typ.
32 (1-1/4")
32 (1-1/4")
Runner sets (includes cabinet and drawer profiles)
Min. cabinet
Inside depth
System screw mounting hole positions
C15 series
white
Nominal
Length
320K5500C
320K5500C15
22"
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 517 (20-3/8")
320K5000C
320K5000C15
20"
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 453 (17-13/16")
C series
cream or white
Cabinet & drawer
Profile length
A
B
C
D
320K4500C
320K4500C15
18"
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
—
320K4000C
320K4000C15
16"
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357 (14-1/16")
—
320K3500C
320K3500C15
14"
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4")
—
Standard front fixing bracket
Clip-on front fixing bracket
Nickel-plated steel
Nickel-plated steel
Part no.
Right
Screw-on
Press-in
Right
Screw-on
ZSF.1700
Left
ZSF.1700
Right
ZSF.1800
Left
ZSF.1800
Press-in
EXPANDO
ZSF.1200
Left
ZSF.1200
Right
ZSF.1300
Left
ZSF.1300
Right
ZSF.130E
Left
ZSF.130E
Cover cap
Cover cap
Nylon white
—
Nylon white
NOTE: Blum logo cover caps available
ZAA.3700
ZAA.3500
Subject to technical modifications without notice. © 2009
NOTE: Blum logo cover caps available
12
Component specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
op
d
si
e
ing
op
wid
en
th
in
g
id
w
mi
th
in
31
/
-1
(1
4"
m
in
us
2
(1
/1
6"
)
)
Profile length
550 (21-5/8")
le
ng
th
pr
ofi
le
Bottom
Sid
locae
tion
Bottom length
548 (21-9/16")
Bot
locatom
tion
500 (19-11/16") 498 (19-5/8")
Front
450 (17-11/16") 448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
/4"
)
Back
Pre-bore holes
if using system
screws
D
ra
w
er
(3/8 9
")
9
(3/8
")
20.5
32
(1-1/4") (13/16")
Ø5
(3/1 x 12
6"x1
/2")
us
32 4")
-1/
32 4") (1
/
1
1
37 6") (
7/1
(1-
s3
1(
1-1
m
(3/1 Ø5 x
6" x 12
1/2
")
nu
Height
In
en
Material
thickness
Back height
13 (1/2")
106 (4-3/16")
16 (5/8")
103 (4-1/16")
19 (3/4")
100 (3-15/16")
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 40 for pre-determined overlays)
Back
8.5 (5/16")
Ø10 x 12
9 (3/8")
8.5 (5/16")
OL
X
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 45.5 (1-13/16")
V
64 (2-1/2")
Y
OL
C15 series
prong
119 (4-11/16")
(3/8"x1/2")
45.5 (1-13/16")
min.
5 (3/16") min.
40.5 (1-5/8")
24 (15/16")
min.
118 (4-5/8") min.
142 (5-9/16") min.
Front
32
34.5
32
(1-3/8") (1-1/4")(1-1/4")
Drawer
Inside opening
20.5 (13/16")
Installation specifications
V = Variable bottom thickness minimum
For frame cabinet specifications
page 34
For gallery rail and BOXSIDE specifications
page 20
For interior drawer specifications
page 24
Dimensions in millimeters (inch equivalents as noted)
13
METABOX 320H drawer series
Drawer components
C15 series
Cabinet profile
Assembly prongs
Drawer profile
2 (1/16")
Setback
Cabinet profile length
D
C
Front fixing brackets
B
A
37 (1-7/16")
9 (3/8") typ.
32 (1-1/4")
32 (1-1/4")
Runner sets (includes cabinet and drawer profiles)
Min. cabinet
Inside depth
System screw mounting hole positions
C15 series
white
Nominal
Length
320H5500C
320H5500C15
22"
557 (21-7/8")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 517 (20-3/8")
320H5000C
320H5000C15
20"
507 (19-15/16")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 453 (17-13/16")
C series
cream or white
Cabinet & drawer
Profile length
A
B
C
D
320H4500C
320H4500C15
18"
457 (17-15/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
—
320H4000C
320H4000C15
16"
407 (16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357 (14-1/16")
—
320H3500C
320H3500C15
14"
357 (14")
350 (13-3/4")
165 (6-1/2")
261 (10-1/4") 325 (12-13/16")
—
Standard front fixing bracket
Clip-on front fixing bracket
Nickel-plated steel
Nickel-plated steel
Part no.
Right
Screw-on
Press-in
Screw-on
ZSF.1700
Left
ZSF.1700
Right
ZSF.1800
Left
ZSF.1800
Press-in
EXPANDO
ZSF.1200
Left
ZSF.1200
Right
ZSF.1300
Left
ZSF.1300
Right
ZSF.130E
Left
ZSF.130E
Cover cap
Cover cap
Nylon white
Right
Nylon white
NOTE: Blum logo cover caps available
ZAA.3700
ZAA.3500
Subject to technical modifications without notice. © 2009
NOTE: Blum logo cover caps available
14
Component specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
op
en
d
si
wid
e
th
op
en
in
mi
g
nu
w
1-1
id
th
m
us
31
/
-1
(1
4"
2
(1
/1
6"
)
)
m
in
us
le
ng
th
pr
ofi
le
Bottom
(3/8 9
")
Profile length
550 (21-5/8")
9
(3/8
")
Sid
locae
tion
Bottom length
548 (21-9/16")
Bot
locatom
tion
500 (19-11/16") 498 (19-5/8")
Front
450 (17-11/16") 448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
350 (13-3/4")
348 (13-11/16")
/4"
)
Back
Pre-bore holes
if using system
screws
D
ra
w
er
32 4")
-1/
32 4") (1
/
1
1
37 6") (
7/1
(1-
20.5
32
(1-1/4") (13/16")
Ø5
(3/1 x 12
6"x1
/2")
in
(3/1 Ø5 x
6" x 12
1/2
")
s3
1(
Height
In
ing
Material
thickness
Back height
13 (1/2")
138 (5-7/16")
16 (5/8")
135 (5-5/16")
19 (3/4")
132 (5-3/16")
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 40 for pre-determined overlays)
Installation specifications
Back
Ø10 x 12
09
V
9
0-0WFSMBZ
90-+ 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
34.5
(1-3/8")
151 (5-15/16")
64 (2-1/2")
8.5 (5/16")
:
77.5 (3-1/16") min.
0-
$TFSJFT
QSPOH
9 (3/8")
(3/8"x1/2")
72.5 (2-7/8")
5 (3/16") min.
150 (5-7/8") min.
174 (6-7/8") min.
24 (15/16")
min.
8.5 (5/16")
Front
20.5 (13/16")
Drawer
*OTJEFPQFOJOH
V = Variable bottom thickness minimum
For frame cabinet specifications
page 34
For gallery rail and BOXSIDE specifications
page 20
For interior drawer specifications
page 24
Dimensions in millimeters (inch equivalents as noted)
15
METABOX 330M drawer series
Drawer components
C15 series
Cabinet profile
Center profile
Assembly prongs
Drawer profile
20 (13/16")
Setback
Cabinet profile length
D
Front fixing brackets
C
B
A
37 (1-7/16")
9 (3/8") typ.
Runner sets (includes cabinet and drawer profiles)
Min. cabinet
Inside depth
System screw mounting hole positions
C series
cream or white
C15 series
white
Nominal
Length
Cabinet & drawer
Profile length
330M550PC
330M550PC15
22"
565 (22-1/4")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 517 (20-3/8")
330M500PC
330M500PC15
20"
515 (20-1/4")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 453 (17-13/16")
330M450PC
330M450PC15
18"
456 (18-5/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
—
330M400PC
330M400PC15
16"
415 (16-5/16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357 (14-1/16")
—
Standard front fixing bracket
A
Nickel-plated steel
Part no.
Right
Press-in
Right
Screw-on
ZSF.1700
Left
ZSF.1700
Right
ZSF.1800
Left
ZSF.1800
Press-in
EXPANDO
D
ZSF.1200
Left
ZSF.1200
Right
ZSF.1300
Left
ZSF.1300
Right
ZSF.130E
Left
ZSF.130E
Cover cap
Cover cap
Nylon white
C
Clip-on front fixing bracket
Nickel-plated steel
Screw-on
B
Nylon white
NOTE: Blum logo cover caps available
ZAA.3700
ZAA.3500
Subject to technical modifications without notice. © 2009
NOTE: Blum logo cover caps available
16
Component specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
op
en
In
d
si
ing
wid
e
th
op
en
in
mi
g
nu
w
1-1
id
th
m
Ø5
(3/1 x 12
6"x1
/2")
31
/
-1
(1
4"
2
(1
/1
6"
)
)
Profile length
550 (21-5/8")
m
in
us
le
ng
th
pr
ofi
le
Pre-bore holes
if using system
screws
D
ra
w
er
(3/8 9
")
9
(3/8
")
Bottom
)
Height
us
32 4")
-1/
32 4") (1
-1/
1
(
7
3
6")
7/1
(1-
/4"
Back
20.5
32
(1-1/4") (13/16")
in
(3/1 Ø5 x
6" x 12
1/2
")
s3
1(
Sid
locae
tion
Bottom length
548 (21-9/16")
Bot
locatom
tion
500 (19-11/16") 498 (19-5/8")
Front
Material
thickness
Back height
13 (1/2")
74 (2-15/16")
16 (5/8")
71 (2-13/16")
19 (3/4")
68 (2-11/16")
450 (17-11/16") 448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 38 for pre-determined overlays)
Installation specifications
Drawer
Inside opening
OL
Y
V
87 (3-7/16")
64 (2-1/2")
9 (3/8")
34.5
32
(1-3/8") (1-1/4")
23.5 (15/16")
13.5 (9/16")
min.
8.5 (5/16")
5 (3/16") min.
48 (1-7/8")
min.
102 (4") min.
54 (2-1/8")
min.
Ø10 x 12
(3/8"x1/2")
20.5 (13/16")
Back
Front
C15 series
prong
8.5 (5/16")
OL
X
For gallery rail and BOXSIDE specifications
Dimensions in millimeters (inch equivalents as noted)
X
0-0WFSMBZ
X = OL + 8.5 (5/16")
V = Variable bottom thickness minimum
Y = OL + 13.5 (9/16")
page 20 For interior drawer specifications
17
page 24
METABOX 330H drawer series
Drawer components
C15 series
Cabinet profile
Center profile
Assembly prongs
Drawer profile
20 (13/16")
Setback
Cabinet profile length
D
C
Front fixing brackets
B
A
37 (1-7/16")
9 (3/8") typ.
Runner sets (includes cabinet and drawer profiles)
Min. cabinet
Inside depth
System screw mounting hole positions
C series
cream or white
C15 series
white
Nominal
Length
Cabinet & drawer
Profile length
330H550PC
330H550PC15
22"
565 (22-1/4")
550 (21-5/8")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 517 (20-3/8")
330H500PC
330H500PC15
20"
515 (20-1/4")
500 (19-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16") 453 (17-13/16")
330H450PC
330H450PC15
18"
456 (18-5/16")
450 (17-11/16")
165 (6-1/2")
261 (10-1/4") 389 (15-5/16")
—
330H400PC
330H400PC15
16"
415 (16-5/16")
400 (15-3/4")
165 (6-1/2")
261 (10-1/4") 357 (14-1/16")
—
Standard front fixing bracket
A
Nickel-plated steel
Part no.
Right
Press-in
Right
Screw-on
ZSF.1700
Left
ZSF.1700
Right
ZSF.1800
Left
ZSF.1800
Press-in
EXPANDO
D
ZSF.1200
Left
ZSF.1200
Right
ZSF.1300
Left
ZSF.1300
Right
ZSF.130E
Left
ZSF.130E
Cover cap
Cover cap
Nylon white
C
Clip-on front fixing bracket
Nickel-plated steel
Screw-on
B
Nylon white
NOTE: Blum logo cover caps available
ZAA.3700
ZAA.3500
Subject to technical modifications without notice. © 2009
NOTE: Blum logo cover caps available
18
Component specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Ins
ide
op
en
d
si
wid
e
th
op
en
in
mi
g
w
th
m
us
31
/
-1
(1
4"
2
(1
/1
6"
)
)
20.5
32
(1-1/4") (13/16")
Ø5
(3/1 x 12
6"x1
/2")
in
pr
ofi
le
le
ng
th
m
in
us
9
(3/8
")
Bottom
(3/8 9
")
Sid
locae
tion
Profile length
550 (21-5/8")
/4"
)
Back
Pre-bore holes
if using system
screws
D
ra
w
er
32 4")
-1/
32 4") (1
-1/
1
(
7
3
6")
7/1
(1-
s3
1(
1-1
id
(3/1 Ø5 x
6" x 12
1/2
")
nu
Height
In
ing
Bot
locatom
tion
Bottom length
548 (21-9/16")
Front
500 (19-11/16") 498 (19-5/8")
Material
thickness
Back height
13 (1/2")
138 (5-7/16")
16 (5/8")
135 (5-5/16")
19 (3/4")
132 (5-3/16")
450 (17-11/16") 448 (17-5/8")
400 (15-3/4")
398 (15-11/16")
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 38 for pre-determined overlays)
Drawer
Back
(3/8"x1/2")
7
08.5 (5/16")
For gallery rail and BOXSIDE specifications
Dimensions in millimeters (inch equivalents as noted)
09
34.5
(1-3/8")
64 (2-1/2")
Y
77.5 (3-1/16") min.
5 (3/16") min.
C15 series
prong
9 (3/8")
Ø10 x 12
151 (5-15/16")
23.5 (15/16")
Front
72.5 (2-7/8")
48 (1-7/8") min.
118 (4-5/8") min.
166 (6-9/16") min.
*OTJEFPQFOJOH
20.5 (13/16")
Installation specifications
X
0-0WFSMBZ
90-+ 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
V = Variable bottom thickness minimum
page 20 For interior drawer specifications
19
page 24
METABOX gallery rail and BOXSIDE systems
Gallery components
1
2
3
5
6
7
4
BOXSIDE
INSERTA gallery set
1
Includes:
3
4
Part no.
400 (16") drawer length
Z36M367SE01
450 (18") drawer length
Z36M417SE01
500 (20") drawer length
Z36M467SE01
550 (22") drawer length
Z36M517SE01
H (128 mm high)
Color: cream or white
Part no.
Part no.
400 (16") drawer length
ZRE.371S.ID
400 (16") drawer length
Z36H367SE01
450 (18") drawer length
ZRE.421S.ID
450 (18") drawer length
Z36H417SE01
500 (20") drawer length
ZRE.471S.ID
500 (20") drawer length
Z36H467SE01
550 (22") drawer length
ZRE.521S.ID
550 (22") drawer length
Z36H517SE01
Gallery cross rail
2
M (64 mm high)
Color: cream or white
■ Adjustable rails (qty 2)
■ Rear fixing brackets (qty 2)
■ Colors: cream or white
Gallery connectors
■ 1104 (44") long, cut to length
■ Colors: cream or white
■ Length = inside opening width
minus 60 (2-3/8")
5
Single gallery connector
6
Double gallery connector
Colors: white
Colors: cream or white
Part no.
Gallery cross rail
Subject to technical modifications without notice. © 2009
7
ZRG.1104U
ZRU.00E0.01
ZRU.00Z0.01
Spring connector
Colors: dust gray
20
Part no.
ZRU.10B1E
320N installation specifications
Bottom
Front
Ø10 x 12
(3/8"x1/2")
12.5 (1/2")
Back
OL
32 (1-1/4")
Hole spacing
34.5
Y
V
32
(1-1/4")
111 (4-3/8")
64 (2-1/2")
8.5 (5/16")
13.5
(9/16") min.
8.5 (5/16")
5 (3/16") min.
80 (3-1/8")
min.
54 (2-1/8")
min.
134 (5-1/4") min.
9 (3/8")
(1-3/8")
Inside opening
8.5 (5/16")
C15 series
prong
OL
X
OL = Overlay
V = Variable bottom thickness minimum
X = OL + 8.5 (5/16")
X
Y = OL + 13.5 (9/16")
320M installation specifications
Drawer
Inside opening
Back
OL
C15 series
prong
8.5 (5/16")
OL
X
X
0-0WFSMBZ
X = OL + 8.5 (5/16")
Y = OL + 13.5 (9/16")
NOTE: For double gallery rail application add 64 (2-1/2") to opening and back height
Dimensions in millimeters (inch equivalents as noted)
21
32 (1-1/4")
Hole spacing
34.5
(1-3/8")
V
143 (5-5/8")
64 (2-1/2")
Y
64 (2-1/2")
13.5 (9/16") min.
8.5 (5/16")
5 (3/16")NJO
8.5 (5/16")
80 (3-1/8") min.
9 (3/8")
86 (3-3/8")NJO
166 (6-9/16") min.
Ø10 x 12
(3/8"x1/2")
12.5 (1/2")
Front
V = Variable bottom thickness minimum
METABOX gallery rail and BOXSIDE systems
320K installation specifications
Bottom
Front
Back
Ø10 x 12
(3/8"x1/2")
8.5 (5/16")
C15 series
prong
OL
V
34.5
(1-3/8")
175 (6-7/8")
32 (1-1/4")
Hole spacing
64 (2-1/2")
64 (2-1/2")
OL
Y
40.5 (1-5/8")
5 (3/16") min.
45.5 (1-13/16")
min.
8.5 (5/16")
80 (3-1/8") min.
118 (4-5/8")NJO
198 (7-13/16") min.
9 (3/8")
12.5 (1/2")
Inside opening
X
OL = Overlay
V = Variable bottom thickness minimum
X = OL + 8.5 (5/16")
X
:0- 45.5 (1-13/16")
Back
Front
Ø10 x 12
(3/8"x1/2")
09
V
9
0-0WFSMBZ
X = OL + 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
NOTE: For double gallery rail application add 64 (2-1/2") to opening and back height
Subject to technical modifications without notice. © 2009
207 (8-1/8")
64 (2-1/2")
8.5 (5/16")
:
77.5 (3-1/16") min.
0-
$TFSJFT
QSPOH
32 (1-1/4")
Hole spacing
64 (2-1/2")
8.5 (5/16")
72.5 (2-7/8")
5 (3/16") min.
150 (5-7/8") min.
230 (9-1/16") min.
80 (3-1/8") min.
9 (3/8")
22
34.5
(1-3/8")
Drawer
*OTJEF0QFOJOH
12.5 (1/2")
320H installation specifications
V = Variable bottom thickness minimum
Bottom
Inside Opening
Front
Ø10 x 12
Back
(3/8"x1/2")
OL
32 (1-1/4")
Hole spacing
Y
V
34.5
(1-3/8")
143 (5-5/8")
64 (2-1/2")
64 (2-1/2")
23.5 (15/16")
13.5 (9/16")
min.
5 (3/16") min.
8.5 (5/16")
112 (4-7/16") min.
54 (2-1/8")
min.
166 (6-9/16") min.
9 (3/8")
12.5 (1/2")
330M installation specifications
8.5 (5/16")
C15 series
prong
OL
X
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 13.5 (9/16")
V = Variable bottom thickness minimum
Drawer
Back
Front
Ø10 x 12
(3/8"x1/2")
C15 series
prong
OL
X
207 (8-1/8")
V
X
OL = Overlay
X = OL + 8.5 (5/16")
Y = OL + 77.5 (3-1/16")
NOTE: For double gallery rail application add 64 (2-1/2") to opening and back height
Dimensions in millimeters (inch equivalents as noted)
32 (1-1/4")
Hole spacing
64 (2-1/2")
64 (2-1/2")
8.5 (5/16")
Y
77.5 (3-1/16") min.
OL
5 (3/16") min.
72.5 (2-7/8")
23.5 (15/16")
112 (4-7/16") min.
118 (4-5/8") min.
230 (9-1/16") min.
9 (3/8")
23
34.5
(1-3/8")
Inside Opening
12.5 (1/2")
330H installation specifications
V = Variable bottom thickness minimum
METABOX 320N interior drawer application
Drawer components
Pre-bore holes for use with
METABOX C15 prongs
de
si
In
i
en
op
ng
th
id
w
m
us
in
31
")
/4
-1
(1
18
m
in
us
le
ng
th
pr
ofi
le
Bottom
(3/8 9
")
Interior front
fixing brackets
Ins
ide
op
en
op
ing
th
en
wid
th
Front
mi
nu
4(
2-1
/2"
e1
)
6(
5/8
") t
hic
kn
es
so
nly
61 (2-3/8")
Us
mi
nu
s3
1(
1-1
Ø5
(3/1 x 12
6"x1
/2")
9
(3/8
")
s6
20.5
(13/16")
ing
wid
/4"
)
Height
Ins
ide
32 4")
-1/
32 4") (1
/
1
(1
D
ra
w
er
21 6")
/1
(13
(1
1/
16
")
(3/1 Ø5 x
6"x 12
1/2
")
Back
Bottom length
532 (20-15/16")
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
270 (10-5/8")
252 (9-15/16")
Bottom material
thickness
Pre-bore holes if
using system screws
Back height
13 (1/2")
42 (1-5/8")
Part no.
16 (5/8")
39 (1-9/16")
Right
ZIF.3010.02
19 (3/4")
36 (1-7/16")
Left
ZIF.3010.03
Interior front fixing bracket
Nylon white
Screw-on
Profile length
550 (21-5/8")
Installation specifications
Drawer
34.5
(1-3/8")
V
55 (2-3/16")
18.5
(3/4")
61
(2-3/8")
49
(1-15/16")
Front
9 (3/8")
20.5 (13/16")
Back
8.5 (5/16")
8 (5/16") min.
57 (2-1/4") 24 (15/16")
min.
min.
81 (3-3/16") min.
Inside opening
9
(3/8")
32
(1-1/4")
Subject to technical modifications without notice. © 2009
V = Variable bottom thickness minimum
24
METABOX 320M interior drawer application
Drawer components
Pre-bore holes for use with
METABOX C15 prongs
de
si
In
i
en
op
ng
th
id
w
m
us
in
31
")
/4
-1
(1
18
in
us
m
le
ng
th
pr
ofi
le
Bottom
(3/8 9
")
Interior front
fixing brackets
Ins
ide
op
en
ide
op
th
Front
mi
nu
6(
5/8
") t
hic
kn
s6
4(
es
2-1
)
nly
9
(3/8
")
s3
1(
Back
/4"
)
Colors: cream or white
Part no.
Right
ZIF.3000.02
Left
ZIF.3000.03
Profile length
Bottom length
550 (21-5/8")
532 (5-7/16")
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
270 (10-5/8")
252 (9-15/16")
Bottom material
thickness
Pre-bore holes if
using system screws
Interior front fixing bracket
Screw-on
nu
Ø5
(3/1 x 12
6"x1
/2")
/2"
so
mi
1-1
20.5
32
(1-1/4") (13/16")
wid
61 (2-3/8")
ing
e1
wid
th
en
Us
ing
Height
Ins
Nylon
32 4")
-1/
32 4") (1
/
1
(1
D
ra
w
er
21 6")
/1
(13
(1
1/
16
")
(3/1 Ø5 x
6"x 12
1/2
")
Back height
13 (1/2")
74 (2-15/16")
16 (5/8")
71 (2-15/16")
19 (3/4")
68 (2-11/16")
Installation specifications
34.5
32
(1-3/8") (1-1/4")
V
87 (3-7/16")
8.5 (5/16")
18.5
61
(2-3/8")
81
(3-3/16")
Front
9 (3/8")
20.5 (13/16")
Back
(3/4")
8 (5/16") min.
NJO
89 (3-1/2") min.
113 (4-7/16") min.
Drawer
Inside opening
9
(3/8")
32
(1-1/4")
Dimensions in millimeters (inch equivalents as noted)
V = Variable bottom thickness minimum
25
METABOX 320K interior drawer application
Drawer components
de
si
In
Pre-bore holes for use with
METABOX C15 prongs
i
en
op
ng
Bottom
th
id
w
m
us
in
31
")
/4
-1
(1
18
m
in
us
pr
ofi
le
le
ng
th
32 4")
-1/
32 4") (1
1/
(1-
D
ra
w
er
21 6")
/1
(13
Front
(1
1/
16
")
(3/1 Ø5 x
6"x 12
1/2
")
(3/8 9
")
Interior front
fixing brackets
Ins
ide
Ins
op
op
en
ing
th
mi
nu
s6
nu
s3
1 (1
-1/
4(
2-1
Us
Ø
(3/15 x 12
6"x
1/2
")
9
(3/8
")
/2"
)
e1
6(
5/8
") t
hic
kn
es
so
nly
4")
532 (20-15/16")
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
Bottom material
thickness
Back height
13 (1/2")
106 (4-3/16")
Part no.
16 (5/8")
103 (4-1/16")
Right
ZIF.3030
19 (3/4")
100 (3-15/16")
Left
ZIF.3030
Colors: cream or white
Screw-on
Bottom length
Back
Pre-bore holes if using
system screws
Interior front fixing bracket
Nylon
mi
20.5
32
32
(1-1/4") (1-1/4") (13/16")
wid
93 (3-11/16")
ing
wid
th
en
Profile length
550 (21-5/8")
Height
ide
V
26
32
34.5
32
(1-3/8") (1-1/4")(1-1/4")
9 (3/8")
119 (4-11/16")
32
(1-1/4")
113 (4-7/16")
93 (3-11/16")
9
(3/8")
32
(1-1/4")
Subject to technical modifications without notice. © 2009
17.5 (11/16")
Back
Front
8 (5/16") min.
121 (4-3/4") min. 24 (15/16")
min.
145 (5-11/16") min.
Drawer
Inside opening
20.5 (13/16")
Installation specifications
V = Variable bottom thickness minimum
20_Head_White
METABOX
320H interior drawer application
Drawer components
de
si
In
Pre-bore holes for use with
METABOX C15 prongs
i
en
op
ng
th
id
w
m
us
in
31
")
/4
-1
(1
18
in
us
m
le
ng
th
pr
ofi
le
ra
w
er
Bottom
(3/8 9
")
Interior front
fixing brackets
Ins
ide
Ins
en
en
ing
ing
wid
th
wid
th
mi
nu
s6
Front
4(
2-1
Ø
(3/15 x 12
6"x
1/2
")
/2"
)
Us
9
(3/8
")
125 (4-15/16")
e1
6(
5/8
") t
hic
kn
es
so
nly
nu
s3
1(
1-1
Back
/4"
)
Bottom length
532 (5-7/16")
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
350 (13-3/4")
332 (13-1/16")
Bottom material
thickness
Back height
13 (1/2")
138 (5-7/16")
Part no.
16 (5/8")
135 (5-5/16")
Right
ZIF.3050
19 (3/4")
132 (5-3/16")
Left
ZIF.3050
Pre-bore holes if using
system screws
Interior front fixing bracket
Colors: cream or white
Screw-on
mi
Profile length
550 (21-5/8")
Height
op
op
20.5
32
32
32
(1-1/4") (1-1/4") (1-1/4") (13/16")
ide
Nylon
32 4")
-1/
32 4") (1
/
1
(1
D
21 6")
/1
(13
(1
1/
16
")
(3/1 Ø5 x
6"x 12
1/2
")
Drawer
Back
Inside opening
34.5
(1-3/8")
V
151 (5-15/16")
17.5 (11/16")
64
(2-1/2")
125 (4-15/16")
8 (5/16") min.
145 (5-11/16")
Front
153 (6") min.
177 (6-15/16") min.
9 (3/8")
20.5 (13/16")
Installation specifications
9
(3/8")
V = Variable bottom thickness minimum
32
(1-1/4")
Dimensions in millimeters (inch equivalents as noted)
27
METABOX 330M interior drawer application
Drawer components
de
si
In
Pre-bore holes for use with
METABOX C15 prongs
i
en
op
ng
th
id
w
m
us
in
31
")
/4
-1
(1
18
m
in
us
le
ng
th
pr
ofi
le
Bottom
(3/8 9
")
Interior front
fixing brackets
Ins
ide
op
en
ide
op
ing
wid
th
en
th
Front
mi
nu
Us
e1
6(
5/8
") t
hic
kn
s6
4(
es
2-1
)
nly
9
(3/8
")
1-1
450 (17-11/16") 432 (17")
/4"
)
400 (15-3/4")
Back
382 (15-1/16")
Bottom material
thickness
Back height
13 (1/2")
74 (2-15/16")
Part no.
16 (5/8")
71 (2-13/16")
Right
ZIF.3000.02
19 (3/4")
68 (3-11/16")
Left
ZIF.3000.03
Colors: cream or white
Screw-on
s3
1(
Pre-bore holes if using
system screws
Interior front fixing bracket
Bottom length
532 (20-15/16")
500 (19-11/16") 482 (19")
nu
Ø5
(3/1 x 12
6"x1
/2")
/2"
so
mi
20.5
32
(1-1/4") (13/16")
wid
61 (2-3/8")
ing
Profile length
550 (21-5/8")
Height
Ins
Nylon
32 4")
-1/
32 4") (1
1/
(1-
D
ra
w
er
21 6")
/1
(13
(1
1/
16
")
(3/1 Ø5 x
6"x 12
1/2
")
Installation specifications
34.5
32
(1-3/8") (1-1/4")
V
87 (3-7/16")
Front
9 (3/8")
20.5 (13/16")
Back
NJO
NJO
NJO
NJO
Drawer
*OTJEFPQFOJOH
Subject to technical modifications without notice. © 2009
V = Variable bottom thickness minimum
28
20_Head_White
METABOX
330H interior drawer application
Drawer components
de
si
In
Pre-bore holes for use with
METABOX C15 prongs
i
en
op
ng
th
id
w
m
us
in
31
")
/4
-1
(1
18
m
in
us
pr
ofi
le
le
ng
th
32 4")
-1/
32 4") (1
1/
(1-
Bottom
D
ra
w
er
21 6")
/1
(13
(1
1/
16
")
(3/1 Ø5 x
6"x 12
1/2
")
(3/8 9
")
Interior front
fixing brackets
Ins
ide
Ins
en
op
en
th
wid
th
Front
mi
nu
s6
4(
2-1
/2"
)
9
(3/8
")
125 (4-15/16")
e1
6(
5/8
") t
hic
kn
es
so
nly
nu
s3
1(
/4"
)
Back
Bottom length
532 (5-7/16")
500 (19-11/16")
482 (19")
450 (17-11/16")
432 (17")
400 (15-3/4")
382 (15-1/16")
Bottom material
thickness
Back height
13 (1/2")
138 (5-7/16")
Part no.
16 (5/8")
135 (5-5/16")
Right
ZIF.3050
19 (3/4")
132 (5-3/16")
Left
ZIF.3050
Pre-bore holes if using
system screws
Interior front fixing bracket
Colors: cream or white
Screw-on
mi
1-1
Ø
(3/15 x 12
6"x
1/2
")
Us
Nylon
wid
20.5
32
32
32
(1-1/4") (1-1/4") (1-1/4") (13/16")
ing
ing
Profile length
550 (21-5/8")
Height
ide
op
Back
32 (1-1/4")
Dimensions in millimeters (inch equivalents as noted)
9 (3/8")
29
34.5
(1-3/8")
7
151 (5-15/16")
64 (2-1/2")
125 (4-15/16")
113 (4-7/16")
8 (5/16") min.
Front
9 (3/8")
17.5 (11/16")
48 (1-7/8") min.
121 (4-3/4") min.
169 (6-5/8") min.
Drawer
Inside opening
20.5 (13/16")
Installation specifications
V = Variable bottom thickness minimum
METAFILE for METABOX
Hanging rail accessories
METAFILE set
Includes components to make one standard
hanging file system
7
6
8
Set includes:
2
4
1
3
■
1 (2) steel hanging rails (ZRM.550S)
zinc coated, 3 x 13 x 550
■
2 (4) rail support brackets (ZRM.0005.10)
synthetic, natural color
■
3 (4) rail support covers (ZRM.0003.10)
synthetic, cream or white
■
4 (2) glide profiles (ZRM.550G) synthetic,
cream or white, 550 length
■
5 (8) flathead wood screws (6064N) nickel,
#6 x 3/4"
ZRM.5500.US
Cream or white
Lateral file accessories
■
6 Lateral bracket synthetic, cream or white
ZRM.0004.10
4 required per drawer
■
7 Steel hanging rail zinc coated,
3 x 13 x 1100 cut to length
5
ZRM.1100S
Centers:
Letter = 310 (12-3/16")
Legal = 386 (15-3/16")
■
8 Glide profile synthetic, cream or white,
1100 mm long, cut to length
ZRM.1100G
32
217 (8-9/16")
279 (11")
V
V = Variable bottom thickness minimum
30
(1-1/4")
Letter = 310 (12-3/16")
Legal = 386 (15-3/16")
Minimum
Letter = 370 (14-9/16")
Legal = 446 (17-9/16")
Subject to technical modifications without notice. © 2009
14 (9/16")
320 series = 18 (11/16") min.
330 series = 10 (3/8") min.
Assembly and installation specifications
METABOX lateral stabilizer
Additional stabilization for wide drawers
For use with METABOX 330M and H series full
extension drawers only.
2
3
1
Available for drawer lengths 550 (22'')
Linkage rod 4 can be cut according to
cabinet width.
4
Suitable for cabinet widths up to 1200 (47'').
Simple assembly of all components.
Does not increase load capacity.
Includes:
■
1 Gear racks, R & L
■
2 (2) pinion gears
■
3 Brackets, R & L
■
4 Linkage (1076 mm)
7 (1/4") Setback
Minimum inside cabinet depth:
572 (22-1/2") for standard drawer
575 (22-5/8") for interior roll-out tray
37 (1-7/16")
165 (6-1/2")
261 (10-1/4")
398 (15-5/16")
Part no.
526 (20-11/16")
550 (22") drawer length
ZST.550MH
Assembly and installation specifications
-
2
1
L = Inside opening width
minus 86 (3-3/8")
3
330M specifications
330H specifications
Dimensions in millimeters (inch equivalents as noted)
31
82.5
(3-1/4")
118
(4-5/8") min.
150 (5-7/8")
32
(1-1/4")
18.5
(3/4")
32 (1-1/4")
54
(2-1/8") min.
86 (3-3/8")
29 (1-1/8")
32
(1-1/4")
32 (1-1/4")
29 (1-1/8")
Roll-out shelf
For interior roll-out shelf organization
Standard runner set 1 & 2
L&R cabinet and drawer profiles
Colors: cream or white
3
5
Drawer length
4
6
2
1
Part no.
350 (13-3/4")
230M3500
400 (15-3/4")
230M4000
450 (17-11/16")
230M4500
500 (19-11/16")
230M5000
550 (21-5/8")
230M5500
■
3 Corner post
ZTU.00Z0
synthetic, cream or white
■
4 Gallery rails
104 (44") long, cut to length
Roll-out bottom dimensions
W = inside opening width minus 25 (1")
Deduct side spacer width if used
L = drawer profile length
cream or white
ZRG.1104U
■
5 Single gallery connector
synthetic, white
ZRU.00E0.01
■
6 Double gallery connector
synthetic, cream or white
ZRU.00Z0.01
Assembly and installation specifications
For roll-out surround assembly
The roll-out surround drilling gauge enables
pre-boring of the fixing positions for the corner
posts.
Includes:
■ (3) special Ø2 mm drill bits
■ (1) #2 Phillips, long screwdriver blade
Part no.
ZML.0010
Boring guage
Installation specifications
Corner post specifications
51 (2")
■ Side gallery rail length = runner length minus 60 (2-3/8")
■ Front and back gallery rail lengths = interior cabinet width minus 69 (2-11/16")
■ Attach with 606N or 606P screws
Subject to technical modifications without notice. © 2009
32
12.5 (1/2")
min.
2 (1/16")
18 (11/16")
30
(1-3/16")
87 (3-7/16")
30
(1-3/16")
22.5 (7/8")
4 (3/16")
Front
22.5 (7/8")
22.5 (7/8")
22.5 (7/8")
METABOX accessories
POSI-STOP assembly
Add-on device to keep drawer front from
contacting the cabinet face.
■ Available in thicknesses of 1.5 (1/16") or
3 (1/8")
■ Synthetic, natural finish
■ Non-handed
■ Use two per drawer
■ Snap in place and secure with wood screw
1.5 or 3 gap
Will not work with
rear mount sockets
(Part no. 602320),
or on METABOX
330 series.
Part no.
1.5 (1/16") gap
298.3210.01
3 (1/8") gap
298.3230.01
Installation screws
606N or 606P
Drawer front support brackets
14 (9/16") min.
Standard drawers
Interior pull-out trays
Drawer front
Add-on brackets for wide drawers to keep the
front tight to the drawer bottom.
Drawer front
■ Stainless steel
■ Attach with 612TH screws
#6 x 1/2" trusshead
Part no.
Drawer
bottom
Drawer
bottom
For standard drawers
ZSB.0090.01
For interior roll-out trays
ZSB.0045.01
Installation screw
612TH
Cabinet profile spacers
With split dowel
Heavy duty spacer
4
1
Without split dowel
■ Two thicknesses available that can be
stacked up to 24 (15/16")
■ Synthetic, cream color
32 (1-1/4")
8
2
■
1 8 (5/16") with Ø5 (3/16") x 11
dowel for linebore mounting
4
3
8
Dimensions in millimeters (inch equivalents as noted)
Part no.
320M0188
19
(3/4
")
Use #6 FH
screw that
penetrates
cabinet side at
least 13 (1/2")
To space runners away from the cabinet side
to clear door protrusion for interior roll-out
trays.
2 4 (5/32") stackable
■
320M0048
■
3 8 (5/16") stackable
320M0088
Installation screw
NOTE: Use spacers on front, middle
and rear of each cabinet profile for
adequate support.
33
606N or 606P
■
4 32 (1-1/4") x 19 (3/4")
Synthetic, white color
Heavy duty spacer
602750
Installation screw
661.1150
Installation screw
661.1450
METABOX accessories
Universal drawer bracket
METABOX top mount (320N shown)
M4 ed
p
tap s
e
l
ho
79 (3-1/8")
30
(1-3/16")
32
(1-1/4")
1.5 (1/16")
For mounting Blum runners to the underside
of a counter surface (pencil drawer) or to the
floor of a cabinet (roll-out tray).
■ Zinc coated steel
■ Includes (8) M4 x 6 flathead machine
screws to attach runners to brackets
■ Attach to cabinet with Blum 612TH screws,
#6 x 1/2” truss head
Bottom mount (320N only)
62 (2-7/16")
30 (1-3/16")
68 (2-11/16")
)
/2"
2-1 )
(
64 7/8"
(148 ")
8
(5/
16
Part no.
Universal bracket kit (4)
68
(2
Installation screw
295.4000
612TH
Rear mount sockets
For use with METABOX 320N, M, K, H and all
230M runners in frame cabinets.
Series Runner position Socket position
320N
66.5 (2-5/8")
35.5 (1-3/8")
320N
99.5 (3-15/16")
67.5 (2-11/16")
320N
131.5 (5-3/16") 89.5 (3-1/2")
320N
163.5 (6-7/16")
131.5 (5-3/16")
■ Synthetic, cream color
■ Attach with Blum 612TH screws,
#6 x 1/2" trusshead
")
16
(7/
12 in.
m
1/4"
2")
(1/
13
er
nn
Ru ition
s
po
Socket
Chart
Position
min.
Front
Frame
NOTE: Cannot be used with METABOX 330
series or in conjunction with POSI-STOP’s.
Part no.
Left and right socket set
Installation screw
602320
612TH
Door protectors
Space requirements
For pull-out surrounds to prevent damage to
doors.
34 min.
(1-5/16")
230M runner
■ Epoxy coated steel with synthetic rollers,
cream color
■ Attaches to the underside of the drawer
■ For use with 230M runners only
15 (9/16")
Part no.
Door protector
Installation screw
Subject to technical modifications without notice. © 2009
34
298.2200
612TH
METABOX assembly tools
METABOX layout templates
Drawer & front
fixing bracket
Cabinet Profile
METATEMP
Drawer front
METATEMP layout templates provide a simple
means for locating the cabinet profile and front
fixing bracket positions.
■ Included in each kit are five templates for
320N, 320/330M, 320K, 320/330H, and a
gallery locator for all series.
■ Each template’s height is the minimum
cabinet opening size required. To use,
place on a side panel and mark the cabinet
profile location. Transfer the front fixing
bracket location to the drawer front.
■ For linebored cabinets, insert a shelf pin
through the template into the system hole.
e
¨
Part no.
Layout template kit
METATEMP
Drawer front marking gauges
1
For marking all front fixing bracket positions
including drawers with galleries.
2
3
2
4
1
Marking
■ Position gauges onto closed
three-sided drawer
■ Line up the drawer front and mark
fixing positions with a light tap on
either side
■ Attach front fixing brackets over the
pin hole marks
■ Attach INSERTA gallery rail
1 Standard marking gauge set
■
Part no.
For METABOX 320N, K, H
ZML.1500
For METABOX 320N
ZML.1510
■
2 Gallery marking gauge set
(2) rods with adjustable marking gauges
ZML.8000.02
METABOX boring template
For manually boring all the holes
necessary to build a METABOX drawer.
Ø10 drill bit
Boring template can be used for drawer front,
back and bottom. Locates all fixing points.
Ø5 (3/16") & Ø10 (3/8") stop collars included.
Ø10 (3/8") center punch included.
Marking or
boring drawer front
Ø5 drill bit
Ø5 drill bit
Boring
drawer back
Boring template set
Boring drawer bottom
Dimensions in millimeters (inch equivalents as noted)
Part no.
35
ZML.0040
Ø5 (3/16") drill bit
DB-5mm
Ø10 (3/8") drill bit
DB-10mm
METABOX assembly tools
MINIFIX
For precise positioning of cabinet profile fixing
screws.
■ For METABOX series 320N, M, K, H
■ For runners 230M
Part no.
MINIFIX
65.3300
Adjustable calibrated boring gauge
For determining cabinet profile positions and
pilot boring.
A
■ Boring gauge can be used with assembled
or unassembled cabinets.
■ Locates precise and level fixing points of
cabinet profiles.
■ Calibrated metric rail works with
DYNAPLAN for locating profile position.
B
Includes:
■
A Clamp assembly
■
B Templates
C Calibrated rail, length 1000 (39")
■
D Extension drill bit for Ø2 (1/8")
■
C
D
1 Determine runner locations from DYNAPLAN or by manual calculation.
■
2 Set templates on the bar by the scale.
■
■
3
■
4
■
5
■
6
Clamp assembly to the cabinet side.
Bore Ø2 mm pilot holes for front and middle mounting positions.
Fasten runners to cabinet with wood screws.
Add screws to back of runner for added strength as required.
Subject to technical modifications without notice. © 2009
Part no.
Boring gauge set
2 mm twist bit
36
65.1000
DB-2mm
Machines
MINIPRESS P - Deluxe boring and insertion machine
Features:
■ Front adjustable boring distance
with digital counter
■ Pneumatic hold-down clamps
■ Improved boring depth adjustment
■ Improved positioning stops (4)
■ Tool kit included
■ Dust collection attachment
■ Accepts optional 7 or 8 spindle
boring heads
Part no.
Single phase - 220V power Laser center line optional
M53.1053.US
Three phase - 220V power Laser center line optional
M53.1004.US
Three phase - 440V power Laser center line optional
M53.1005.US
MINIPRESS P - Standard boring and insertion machine
Features:
■
■
■
■
Front adjustable boring distance
Improved boring depth adjustment
Improved positioning stops (4)
Tool kit included
■ Dust collection attachment
■ Accepts optional 7 or 8 spindle
boring heads
Single phase - 220V power
Part no.
Optional laser center line, digital counter and hold down clamps
M53.1053.UB
MINIPRESS M - 110V manual boring and insertion machine
Features:
■
■
■
■
110V power with molded plug (portable)
Does not require pressurized air
4 positioning stops included
Tool kit included
■ Dust collection attachment
■ Accepts optional 7 or 8 spindle
boring heads
110V power
Part no.
Boring distance stop kit optional. No laser center line option
M52.1056.US
MINIDRILL P - Standard boring machine
Features:
■ Front adjustable boring distance
■ Improved positioning stops (4)
■ Tool kit included
■ Dust collection attachment
■ Accepts optional 7 or 8 spindle
boring heads
Single phase - 220V power
Optional laser center line, digital counter and hold down clamps
Part no.
M53.1053.50
Three phase - 220V power
Optional laser center line, digital counter and hold down clamps
M53.1004.50
Three phase - 440V power
Optional digital counter and hold down clamps. No laser center line option
M53.1005.50
Optional items
NOTE: See Assembly aids brochure for more options.
Laser center line kit
Digital counter kit
Hold down clamp kit
Dimensions in millimeters (inch equivalents as noted)
37
MZR.5300.US
MZE.2110
M53.0720.US
METABOX assembly tools
MINIPRESS boring heads
Seven spindle
For line boring with the MINIPRESS.
Eight spindle
The seven spindle head bores seven holes
32 mm apart, parallel to the fence. The eight
spindle head bores eight holes 32 mm apart,
perpendicular to the fence. Bores for all
METABOX front fixing brackets and galleries.
Part no.
Countersink drill bit
Seven spindle boring head
MZK.1000.US
Eight spindle boring head
MZK.8000.US
Drill bits
Drill bits for the MINIPRESS/MINDRILL and
boring heads.
Part no.
Ø10 mm drill bit (LH)
Ø5 mm drill bit (right hand)
M01.ZB05.D2
Ø5 mm drill bit (left hand)
M01.ZB05.D3
Part no.
Ø10 mm drill bit (right hand)
M01.ZB10.02
T108-10mm L
Ø10 mm drill bit (left hand)
M01.ZB10.03
Installation tools
For location and insertion of front fixing
brackets.
Three spindle locator enables the positioning
of the drawer front without using fence stops.
1
Insertion ram
2
Three spindle
locator
Drill fixing holes
Insert front fixing brackets
2
Part no.
3
Knock-in tool
■
1 Insertion ram for MINIPRESS
ZSF.1300 and ZSF.1800
2 Three spindle locator
■
MZM.0092.01
MZR.2000
■
3 Knock-in tool
ZSF.1300 and ZSF.1800
ZME.1600
■
3 Knock-in tool
ZSF.1610
Subject to technical modifications without notice. © 2009
38
ZME.1610
MINISTICK fence stop
Bumpers
Enables fast setup for drawer front boring
and front fixing bracket insertion with the
MINIPRESS.
Eliminates the need for multiple fence stops.
Includes:
■
1 LH & RH adj. stick mechanism
2 (2) Upper drawer stops
■
■
3 (2) Bottom drawer stops
3
1
■ Cushions door closing
■ Clear with a self-adhesive back
2
3
NOTE: Essential tool for production boring of
drawer fronts when using DYNAPLAN software.
MINISTICK
Part no.
Part no.
Ø6 (1/4") x 1.5 (1/16")
FX4041
MZS.0040
Ø10 (3/8") x 3 (1/8")
SJ5312
Replacement dowell and screw
POZI DRIVER and bits
Replacement dowell and screw for the front
fixing brackets.
A POZI screwdriver (different from Phillips)
is the most crucial tool you can use to assure
that full torque is applied to all Blum mounting
screws. POZI screws can be identified by the
distinctive “tick” marks located in the center of
the screw head recess.
Phillips
POZI
Tick marks
Part no.
#2 POZI DRIVER
POZI DRIVER
1/4" bit holder
BIT HOLDER
Part no.
#2 x 1" POZI bit insert
POZI BIT #2x1
Ø10 mm dowell
#2 x 2" POZI bit insert
POZI BIT #2x2
Dowell screw
80.3532
608.1200
Screws
Deep thread system screw
Deep thread wood screw
Truss head wood screw
Pilot bore Ø5 (3/16") hole
Pilot bore Ø2 (3/32") hole
Dia.
Part no.
#7 x 11.5 mm, #2 POZI
661.1150.HG
#6 x 5/8", #2 Phillips
606N
#7 x 13 mm, #2 POZI
661.1300.HG
#6 x 5/8", #2 POZI
606P
#7 x 14.5 mm, #2 POZI
661.1450.HG
#7 x 5/8", #2 Phillips
707N
#7 x 11.5 mm, Special
662.1150.HG
#7 x 3/4", #2 Phillips
7074N
Dimensions in millimeters (inch equivalents as noted)
L
Part no.
39
Part no.
#6 x 1/2", #2 Phillips
612TH
METABOX drawer front overlay charts
Determining front fixing bracket locations
32 (1-1/4")
N height
METABOX
4JE
MPDBF
UJPO
#PU
MPDBUPN
UJPO
64 (2-1/2")
M, K & H height
METABOX
Side location
Screw or
boring
location
Side
overlay
˜Y
Y
4JEF
MPDBUJPO
13 (1/2")
21.5 (13/16")
14 (9/16")
16 (5/8")
22.5 (7/8")
24.5 (15/16")
17.5 (11/16")
19 (3/4")
26 (1")
27.5 (1-1/16")
NOTE: For overlays not shown please refer
to specification pages 6-19 to calculate hole
locations
Bottom location
Bottom
overlay
˜Y
Y
#PUUPN
MPDBUJPO
Screw or boring location
13 (1/2")
14 (9/16")
16 (5/8")
N and M
26.5 (1")
27.5 (1-1/16")
29.5 (1-3/16")
K
58.5 (2-5/16")
59.5 (2-3/8")
61.5 (2-7/16")
H
90.5 (3-9/16")
91.5 (3-5/8")
93.5 (3-11/16")
17.5 (11/16")
19 (3/4")
31 (1-1/4")
32.5 (1-5/16")
63 (2-1/2")
64.5 (2-9/16")
95 (3-3/4")
96.5 (3-13/16")
#PUUPN
PWFSMBZ
NOTE: For overlays not shown please refer to specification pages
6-19 to calculate hole locations
Subject to technical modifications without notice. © 2009
40
i
Part number index
Part no.
Page no.
65.1000
65.3300
80.3532
230M3500
230M4000
230M4500
230M5000
230M5500
295.4000
298.2200
298.3210.01
298.3230.01
320H3500C
320H3500C 15
320H4000C
320H4000C15
320H4500C
320H4500C15
320H5000C
320H5000C15
320H5500C
320H5500C15
320K3500C
320K3500C15
320K4000C
320K4000C15
320K4500C
320K4500C15
320K5000C
320K5000C15
320K5500C
320K5500C15
320M0048
320M0088
320M0188
320M2700C
320M2700C15
320M3500C
320M3500C15
320M4000C
320M4000C15
320M4500C
320M4500C15
320M5000C
320M5000C15
320M5500C
320M5500C15
320N2700C
320N3500C
320N3500C15
320N4000C
320N4000C15
320N4500C
320N4500C15
320N5000C
Dimensions in millimeters (inch equivalents as noted)
36
36
39
32
32
32
32
32
34
34
33
33
14
14
14
14
14
14
14
14
14
14
12
12
12
12
12
12
12
12
12
12
33
33
33
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
320N5000C15
320N5500C
320N5500C15
330H400PC
330H400PC15
330H450PC
330H450PC15
330H500PC
330H500PC15
330H550PC
330H550PC15
330M400PC
330M400PC15
330M450PC
330M450PC15
330M500PC
330M500PC15
330M550PC
330M550PC15
606N
606N or 606P
606P
608.1200
612TH
661.1150
661.1150.HG
661.1300.HG
661.1450
661.1450.HG
662.1150.HG
707N
7074N
602320
602750
BIT HOLDER
DB-2mm
DB-5mm
DB-10mm
M01.ZB05.D2
M01.ZB05.D3
M01.ZB10.02
M01.ZB10.03
M52.1056.US
M53.0720.US
M53.1004.50
M53.1004.US
M53.1005.50
M53.1005.US
M53.1053.50
M53.1053.UB
M53.1053.US
METATEMP
MZE.2110
MZK.1000.US
MZK.8000.US
8
8
8
18
18
18
18
18
18
18
18
16
16
16
16
16
16
16
16
39
33
39
39
33, 34, 39
33
39
39
33
39
39
39
39
34
33
39
36
35
35
38
38
38
38
37
37
37
37
37
37
37
37
37
35
37
38
38
41
MZM.0092.01
MZR.2000
MZR.5300.US
MZS.0040
POZI BIT #2X1
POZI BIT #2X2
POZI DRIVER
Z36H367SE01
Z36H417SE01
Z36H467SE01
Z36H517SE01
Z36M367SE01
Z36M417SE01
Z36M467SE01
Z36M517SE01
ZAA.3500
ZAA.3700
ZIF.3000.02
ZIF.3000.03
ZIF.3010.02
ZIF.3010.03
ZIF.3030
ZIF.3050
ZME.1600
ZME.1610
ZML.0010
ZML.0040
ZML.1500
ZML.1510
ZML.8000.02
ZRE.371S.ID
ZRE.421S.ID
ZRE.471S.ID
ZRE.521S.ID
ZRG.1104U
ZRM.0004.10
ZRM.1100G
ZRM.1100S
ZRM.5500.US
ZRU.00E0.01
ZRU.00Z0.01
ZRU.10B1E
ZSB.0045.01
ZSB.0090.01
ZSF.130E
ZSF.1200
ZSF.1300
ZSF.1510.04
ZSF.1510.05
ZSF.1610.04
ZSF.1610.05
ZSF.1700
ZSF.1800
ZST.550MH
ZTU.00Z0
38
38
37
39
39
39
39
20
20
20
20
20
20
20
20
10, 12, 14, 16, 18
10, 12, 14, 16, 18
25, 28
25, 28
24
24
26
27, 29
38
38
32
35
35
35
35
20
20
20
20
20, 32
30
30
30
30
20, 32
20, 32
20
33
33
10, 12, 14, 16, 18
10, 12, 14, 16, 18
10, 12, 14, 16, 18
8
8
8
8
10, 12, 14, 16, 18
10, 12, 14, 16, 18
31
32
Blum, Inc. Headquarters, Stanley NC
42
Our understanding
of perfecting motion
Blum, Inc. is a leading manufacturer of functional hardware for the
kitchen cabinet and commercial casegoods industries specializing in
concealed hinges, drawer runner systems and lift systems. Virtually all
of the hardware needed to assemble and make cabinets functional is
available within the wide range of quality Blum products.
Blum’s manufacturing and distribution facility in Stanley, North
Carolina supplies the North American markets through a network
of more than 150 dependable distributors. Wholly owned by the
Blum family, the company was formed in 1952 by Julius Blum and is
headquartered in Hoechst, Austria.
Global customer benefits
Product development at Blum considers all of the various customers
who will come in contact with our products. With this “Global Customer
Benefits” philosophy we strive to create advantages for all users from
the manufacturer to the end consumer.
Blum, Inc. is ISO 9001 certified which means that you are assured of
consistent quality in every Blum product. What’s more they exceed the
requirements of ANSI/BHMA standards for cycle life, static load and
self-closing performance. Contact your local Blum representative for
more details.
43
Blum, Inc.
7733 Old Plank Rd.
Stanley, NC 28164
800-438-6788
704-827-1345
fax 704-827-0799
www.blum.com
Please visit www.blum.com for information on other Blum products.
Technical specifications subject to change without notice.
LIT.MBX1000.07.09 © 2009 Printed in USA