Found in this Section - Big Boar V-Twin

YAMAHA
for
Found in this Section:
LIGHTING
HANDLEBAR CONTROLS
FOOT CONTROLS
COVERS, TRIMS & ACCENTS
touring & comfort
PERFORMANCE
44
47
49
52
58
60
find more accessories for
your yamaha in multi-fit
89
37
accessory mounts 102
handlebar controls 47
touring & comfort 58
38
rear end chrome 55
foot controls (passenger) 130
foot controls (driver) 49
for
ROAD STAR
HEADLAMPS 46
driving lights 44
39
covers, trims & accents 52
performance 60
audio 90
handlebar controls 47
lighting 44
40
front end chrome 52
foot controls 49
air cleaners 60
engine chrome 55
rear end chrome 54
rear end chrome 54
for
RAIDER
41
touring & Comfort 58
performance 60
42
rear end lighting 45
rear end chrome 56
accessory mounts 102
handlebar controls 47
sound of chrome 90
driving lights 44
front end chrome 52
43
foot controls 49
for
V STAR 110
Lighting
constellation
driving lights
Great Driving
Light Bar Options!
find these, and more lighting
options in Multi-Fit
with turn signals
91
Constellation Driving Light Bar
P/N 5001
patent pending
With DOT approved H-3 bulbs in a 3”
diameter stretched bullet housing that
flows down to a coordinating 2-1/4” turn
signal housing, these are the answer
to exceptional front lighting. Designed
to mount directly to your forks with our
Two-Piece Clamps. Wiring & adding a switch is simple with our Wiring
Relay Kits (P/N’s 2202 or 2328 – Sold Separately), found in the Multi-Fit
section, page 93.
Fits: Universal Applications for Installation with Küryakyn Two-Piece
Clamps (Sold Separately - below)
Not intended for use with motorcycles that have OEM fork shrouds
5009 Constellation Driving Lights with Turn Signals (set)
Driving Light Bar
P/N 4001
Note: Turn signals have smoked lenses with amber bulbs.
Note: For applications with OEM fork shrouds we suggest the Constellation Driving
Light Bar (P/N 5001 - left). Not for use with Küryakyn Windshields or Fairings.
replacement bulbs (p/n 5035, 2229, 2214 & 4813)
can be found in the multi-fit section, pages 91 & 98-99
two-piece fork mounts
Our sturdy chrome-plated mounts are just
the ticket to attach Constellation Driving
Lights, Silver Bullets or custom lights using
5/16” mounting hardware to fork tubes.
Mounting Bracket
P/N 4004, 4005 & P/N 4010
Upgrade
to L.E.D.
replace your driving lights
with our 3” L.E.D. UPGRADE
LAMPS (P/N 5035) - found in
the multi-fit section, page 91
2286 41mm Two-Piece Fork Mounts (pr)
Fits: Stryker, V Star 1100 Custom & V Star 650 Custom
2275 54mm/58mm Two-Piece Fork Mounts for Inverted Forks (pr)
Fits: Road Star Warrior
frame mounted driving lights
Light up the night with our slick Frame Mounted Driving lights. These luminous lights use a 3”
diameter streamlined housing with super white H3 bulbs that provide extra light where it is needed
most. Light can be mounted virtually anywhere on the down tubes & can be adjusted with ease.
Increase your visibility to others without compromising the style & function of your ride.
5016 For 1-1/8" & 1-1/4" Bar (pr)
Fits: Yamaha: All ‘98-’13 V Star 650, ’99-’09 V Star 1100, ’99-‘13 Road Star
1600/1700, ’06-’13 Roadliner & Stratoliner & Deluxe, & ’08-’13 Raider Models
Universal: 1-1/8” & 1-1/4” tube
Requires 3/4” clearance around tube by 3/4” straight tube length for mounting.
Note: We suggest using Wiring & Relay K it for proper installation (P/N 2202 or 2328 - page 93).
44
www . K uryakyn . com
866.277.9598
yamaha
change turn signals into run–turn–brake!
triple whammy™ run-turn-brake light kit
4602
Change your stock turn signals into run-turn-brake lights with easy
plug-&-play installation. The optional flash mode flashes the taillights
when the brakes are hit – catching the attention of anyone behind you.
This kit includes Plug & Play Run-Turn-Brake Controller & replacement
lenses or bulbs to update turn signals to red.
Optional- 2 Second Flashing B rake Function
4602 Fits: All ‘04-‘13 Road Star1700 (except
Warrior), all ‘04-‘09 V Star 1100 & all
‘04-’13 V Star 650, all ‘07-’13 V Star 1300,
‘09-‘13 V Star 950, & ‘11-’13 Stryker (set)
accessories for
yamaha
note: triple whammy includes everything you need for installation on motorcycles equipped
with oem turn signals. installation of this product may be in violation of fmvss #108.
plug & play
run-turn-brake controller
96
Upgrade
to L.E.D.
L.E.D. Turn Signal
conversion kits
P/N 5446 or 5447
Change your turn signals into
running, turn & brake lights & light
4612
up the back of your motorcycle
for increased visibility. This plug &
play controller connects directly into the stock OEM wiring harness under the
seat with no need to splice any wires. Simply finish off the installation with the
required red turn signal lenses (or bulbs if you have clear lenses) for the rear of
your motorcycle. See Red Turn Signal options & Red Replacement Bulbs (pg 97)
4612 Fits: All ‘04-’13 Road Star 1700 (except Warrior), all ‘04-’09 V Star
1100 & All ‘04-’13 V Star 650, ‘07-’13 V Star 1300, ‘09-‘13 V Star 950,
& ‘11-’13 Stryker (set)
Note: Adds optional pulsating brake light function. Rear running lights on a motor vehicle must
be R ed (see page 96). I nstallation of this product may be in violation of FMVSS #108.
For additional applications, see
run-turn-brake controller (p/n 4710)
Multi-Fit – page 100
multi-fit
audio
lighting
plug & play!
turn signals
accessory
mounts
for road star
gauges &
instruments
with lighted curved license plate
Streamline your back fender & add that custom classy
look to your Road Star! Designed to flow around
your stock taillight this kit fully replaces that stock
bulky turn signal & license plate bracket.
Fits: ’04-’13 Road Star 1700 Models (except Warrior)
9259 Turn Signals with Lighted Curved
License Plate (kit)
note: comes with standard
handlebar
controls
foot
controls
covers,
trims &
accents
luggage
1156 clear bulb.
4814 Replacement Red 1156 Style Bulb (ea)
Note: Updates turn signals to red. License plate frame marked
SAE DOT L11.
yamaha > lighting
performance
the shop
45
Night and
DayDifference!
2249
2249 & 5049 UNLIT
2249 & 5049 LIT
Stock Halogen Low Beam & Passing Lamps
L.E.D. Low Beam & Passing Lamps
phase 7 l.e.d. headlamp
Increase your visibility and enhance your night time riding experience
with this DOT approved replacement for your halogen light!
L.E.d. Halo
trim ring
for yamaha headlights
• Complex Reflector design provides unmatched performance while
providing the appearance of a traditional headlamp.
U.S. Patent D667,989 &
D668,380
• Impact resistant polycarbonate lenses with chemical & scratch resistant non-yellowing coating.
Turn some heads! Its ability
to shine in both the brightest of
days & darkest of nights, its incredibly low
power draw, & stylish chrome outer bezel,
make this a must-have product.
• Low beam current draw 1.5 amps (stock halogen=4.9 amps)
• High beam current draw 2.3 amps (stock halogen=5.5 amps)
• Meets applicable DOT, FMVSS or SAE requirements – 3-yr warranty
2249 Fits: Yamaha V Star 650 & 1100 Classic with 7”
headlamp, All Road Star Models (except Warrior) for
7” Headlamp housing with H4 headlamp plug
5049
Fits: All V Star 1100 Classic & V Star
650 Classic
5049
L.E.D. Halo Trim Ring (ea)
7” headlamp
Using a 55/60 watt halogen bulb, this headlamp projects a strong white beam uniquely
directed by a gemstone-inspired reflector & a centered reverse reflector. Replacement
bulbs can be found on in our Multi-Fit section, page 98.
2147 Fits: Yamaha V Star 650 & 1100 Classic with 7” headlamp,
Road Star Models (except Warrior) with 7” headlamp (ea)
Note: Use of high power (100w) bulbs is not recommended & will void warranty.
46
www . K uryakyn . com
866.277.9598
iso ®
Handlebar Controls
iso®-grips U.S. P
atent
D411,432
Combining great style & comfort, these grips
provide a soft, non-slip surface that dampens
operating vibration. Recessed area between the
ISO-Pads permit air movement for added comfort
in hot weather.
iso -flame grips
®
Featuring a unique flamed pattern in the soft &
cushy raised rubber pads & finished off with a
Maltese Cross emblazoned end cap & smooth trim
ring for that additional bad attitude.
transformer™ grips
U.S. Patent D631,725
Transform the look & feel of your ride! Bright
chrome grip bodies & sculpted end caps provide a
solid feel while contrasting soft black rubber inlays
absorb vibration. Interchangeable Widow, Zombie
or Maltese Cross Emblems.
Note: Accepts all grip end accessories except Accent Rings.
Will only accept smooth accent rings for transformer grips
(P/N 6364).
Note: Kuryakyn Grips are compatible with aftermarket internal
bar-style heated grips. N ot compatible with OEM heated grips
where heat element is in the grip.
Grip Accessories
accessories for
black iso ®
iso ®-Flame
yamaha
transformer™
yamaha
Black ISO
ISO Flame
Yamaha
Road Star
(All Models)
YR
ISO
’99-’13
6235
6345
6261
6231
Road Star Warrior
‘02-’09
6235
6345
6261
6231
V Star 1300
(All Models)
‘07-’13
6235
6345
6261
6231
V Star 1100/650
Classic
‘98-’10
6235
6345
6261
6233
V Star 1100/650
Custom
‘98-’13
6235
6345
6261
6231
V Star 950 (All
Models)
‘09-’13
6235
6345
6261
6231
Roadliner
(All Models)
’06-’13
6235
6345
6261
6233
Stratoliner &
Deluxe
(All Models)
’06-’13
6235
6345
6261
6233
Royal Star &
Venture
ALL
6235
6345
6261
6231
Raider (All Models)
‘08-’13
6235
6345
6261
6233
Stryker
‘11-'13
6235
6345
6261
6231
lighting
ALL
6241
6341
6263
N/A
accessory
mounts
Universal
1” Handlebars
YR
ALL
Black ISO
ISO
ISO Flame
6240 6340 6262
7/8” Handlebars
ALL
6241
Virago
750/535/250/
V Star 250*
6341
6263
Transformer
multi-fit
audio
gauges &
instruments
Transformer
6232
N/A
handlebar
controls
foot
controls
covers,
trims &
accents
luggage
110
performance
mechanical throttle cruise assists,
end caps, accent rings & more!
the shop
yamaha > handlebar controls
47
accessory switches
for master cylinder reservoir covers
Control your accent lighting & additional motorcycle accessories at
the tip of your fingers with these master cylinder Accessory Switches.
Rated for 12V & up to 10 Amp accessories each.
Fits: ’96-’01 Royal Star, ’02 Royal Star Venture, ’99-’13 Road Star
1600/1700, ’02-’09 Road Star Warrior
Note: Does not install with other M aster Cylinder Cover Accessories.
7803 Accessory Switches for Master Cylinder
Reservoir Covers (ea)
zombie™ levers
U.S. Patent D596,091
photo shown is
representative of
product listed
With contoured finger
pockets & a small center rib,
you'll have a positive pull when clutching & braking with reduced
finger pressure. Match these to other Zombie or Grooved products &
achieve that truly finished look.
7413 Fits: Yamaha ‘06-’13 Roadliner, ‘06-’13
grooved & zombie
emblems included
Stratoliner/Deluxe, ‘08-’13 Raider (pr)
Handlebar Accessories, Throttle Assists,
Mirrors, and more!
see all our handlebar
accessories in Multi-Fit
108
wide style levers
7415
’06-’13 Stratoliner/Deluxe (All Models)
for metric cruisers
These chrome levers are
typically wider & more
comfortable than stock.
’06-’13 Roadliner (All Models)
7417
’08-’13 Raider (All Models)
’98-’13 V Star 650 Custom
7418
’99-’09 V Star 1100 Custom
’99-’13 Road Star 1600/1700 (All Models)
7419
’02-’09 Road Star Warrior
’98-’10 V Star 650 Classic
’99-’09 V Star 1100 Classic
‘07-’09 V Star 1300/T
‘09-’13 V Star 950/T
48
www . K uryakyn . com
866.277.9598
starting on page 114
Foot Controls
accessories for
7024
floorboard covers
yamaha
Huge Selection of Footpegs & Floorboards
yamaha
Dress up those drab stock rider (driver) boards. To
install, just peel off the stock rubber layer, pop the cover into
place, & screw the cover onto the stock board from the bottom.
7020 Floorboard Covers for Yamaha (pr) U.S. Patent D544,410
Fits: ‘99-’09 V Star 1100 Classic, '09-'13 V Star 950/T,
‘07-’13 V Star 1300/T, & all ‘99-’13 Road Star 1600/1700
(except Warrior)
7024 Floorboard Covers for Yamaha (pr)
Fits: All Roadliner, Stratoliner, & Deluxe Models with
OEM floorboards
footpeg adapters
7020
Sold in Pairs
Kuryakyn floorboards and foot pegs feature a two part
mounting system allowing you to choose the right style for the
right bike. Depending on the style you choose, each floorboard
or foot peg will require either a splined or tapered adapter
(sold in pairs). Throughout the book, floorboards and foot pegs
are identified by a symbol next to each style indicating whether
it requires a splined or tapered adapter. Use the chart below to
determine the right adapter for your application.
Select a Footpeg or Floorboard
and Mount it with an Adapter!
(pg 114)
multi-fit
yamaha
V Star 1300/T (All)
V Star 1100
V Star 950/T
V Star 650
V Star/Virago 250
V-Max
V-Max
Virago 1100/750
Road Star 1600/ 1700 (ex. Warrior)
Road Star Warrior
Royal Star with OEM Rear Pegs
Roadliner/Stratoliner/Deluxe
Raider
Styker
tapered
splined
year
front
rear
front
rear
‘07-’13
‘99-‘09
'09-'13
‘98-‘13
All
'09-'13
'85-'08
All
‘99-’13
‘02-’09
‘96-’01
‘06-‘13
‘08-'13
‘11-’13
None
8810
None
8810
8831
8802
8810
8810
None
8812
None
None
8802
8810
8809
8811
8811
8811
8811
8843
8811
8811
8811
8809
8811
8809
8809
8811
None
8814
None
8814
––
––
––
8814
None
8818
None
None
8818
8814/8826*
8825
8818
8818
8818
––
––
––
8818
8818
8825
8818
8825
8825
8818
audio
lighting
8810
accessory
mounts
gauges &
instruments
handlebar
controls
8811
foot
controls
covers,
trims &
accents
luggage
8814
Note: Motorcycle specific adapters only work with stock OEM peg mounts.
*Splined Adapter for driver applications requiring P/N 8826 are intended for floorboard applications only.
performance
the shop
yamaha > foot controls
49
adjustable
cruise peg mounts
Adjustable
mounts directly to
your floorboards!
pegs sold separately
page
116
for floorboards
Add the comfort of cruise pegs & keep that clean simple style
with our Adjustable Cruise Peg Mounts. These little beauties
bolt directly onto your floorboards & allow full adjustability for
optional foot positions. Add any of Küryakyn's Male Mount Pegs
(starting on page 116 - sold separately) & ride on!
4549 Fits: Yamaha: Road Star & V Star 950, 1100, &
1300 with stock floorboards (pr)
adjustable mustache bar
Get highway pegs without needing bulky or intrusive engine guards to do
so. With the Adjustable Mustache Bar you get the customization to mount
exactly where needed for a comfort level unlike any other. The perfect
position is possible thanks to the ability to move the pegs both up or down
& forward or back. Requires Küryakyn Male Mount Pegs (sold separately
– see the Multi-Fit section, page 116).
Fits: All ’99-’13 Yamaha Road Star, ‘08-’13 Raider Models, & All ‘98-’13 V
Star 650 Models
7548 Adjustable Mustache Bar (ea)
Note: Pegs fold up stowed when not needed. Not
suggested for use with full size engine guards.
quick reference shift & brake fitment chart
adjustable
cruise pegs
U.S. Patent D405,393 &
D411,440
Utilizing our easily
installed 1-1/4" Magnum
Quick Clamps & X-Tension
Peg Mounts, alter your peg
location to your liking. Comes
equipped with our ever popular & durable Dually
ISO-Peg. Ride on in style & comfort.
Fits: All ‘99-’13 Road Star 1600/1700, ‘02-’09 Road
Star Warrior, ‘06-’13 Roadliner/Stratoliner & Deluxe,
‘99-’09 V Star 1100, '09-'13 V Star 950, All V Star
650, ‘08-'13 Raider (Requires 1-1/4” of available
round space on both front frame tubes)
Note: Pegs can fold up when not needed. Not suggested for use
with full size engine guards.
4501 Cruise Pegs for Yamaha (pr)
50
www . K uryakyn . com
A quick reference for a few Shift & Brake Cover fitments. (Confirm
motorcycle fitment with matching P/N)
yamaha
’07-’13 Road Star 1700 (except
Warrior)
‘99-’06 Road Star 1600/1700 (except
Warrior)
Road Star Warrior
V Star 1300/T & V Star 1100 Classic
V Star 1100 Custom
V Star 950/T
‘01-’10 V Star 650 Classic
‘98-’00 V Star 650 Classic
V Star 650 Custom
‘06-’13 Roadliner, Stratoliner & Deluxe
‘08-'13 Raider
Stryker
Toe
Shifter
Heel
Shifter
Brake
Pedal
8851
None
8858
8851
8851
8858
8851
8851
4034
8851
8851
4034
4034
8851
8851
8851
None
4034
None
4034
4034
None
None
None
None
None
8851
4045
4029
4045
4045
4029
4029
4045
8851
8851
*heel shifter may not work with kuryakyn floorboards or may require upward
adjustments for clearance with floorboards.
866.277.9598
yamaha
2"L x 1-1/4" W
round shift &
brake peg covers
This round rubber-lined chrome
peg accommodates almost any
round application.
4034
shift peg covers
8851 Fits: Royal Star & Venture (Heel & Toe)
Simple hassle-free installation.
4034 Fits: ’98-’00 V Star 650
8851
$
19.99
Classic (Toe)
‘98-’13 V Star 650
Custom (Toe)
‘01-’10 V Star 650
Classic (Heel Only, Toe
P/N 8851)
‘99-’09 V Star 1100
Classic (Heel only, Toe
P/N 8851)
‘99-’09 V Star 1100
Custom (Toe)
'09-'13 V Star 950 (Heel
Only, Toe P/N 8851)
‘07-’13 V Star 1300 (Heel
Only, Toe P/N 8851)
Universal: Most
applications with an oval
shift peg with a width of
5/8” or less
$
19.99
‘07-’13 Road Star (Toe Only)
‘99-’06 Road Star (Heel & Toe) (‘06 Heel Only if OEM Style
Round with Rubber)
‘06-’13 Roadliner, Stratoliner & Deluxe (Toe Only)
‘02-’09 Road Star Warrior (Toe Shift & Brake Pad)
‘99-’09 V Star 1100 Classic (Toe Only, Heel P/N 4034)
'09-'13 VStar 950/T (Toe Only, Heel P/N 4034)
‘01-’10 V Star 650 Classic (Toe Only, Heel P/N 4034)
‘07-’13 V Star 1300/T (Toe Only, Heel P/N 4034)
‘08-'13 Raider (Toe Shift & Brake Pad)
'11-'13 Stryker (Toe Shift & Brake Pad)
accessories for
yamaha
Universal: Most applications with round shift pegs
approximately 2-9/16” long & 9/16” in diameter
brake pedal cover
Clamshell design installs in minutes.
Fits: All ‘99-’13 Road Star 1600/1700
Models (except Warrior)
8858 Brake Pedal Cover (ea)
8858
brake pedal pads
Replace your old stock pads with glistening chrome and high-quality rubber.
Fits: All ’99-’13 Road Star Models (except Warrior)
4029
brake pedal pad covers
A slick little chrome & rubber clamshell
cover that replaces the stock rubber pad.
4029 Fits: ’98-’13 V Star 650
Custom, ’99-’09 V Star
1100 Custom & ’98-’00
V Star 650 Classic
4045 Fits: ’06-’13 Roadliner,
Stratoliner & Deluxe
‘07-’13 V Star 1300/T
'09-'13 V Star 950/T
‘01-’10 V Star 650
Classic
'00-’09 V Star 1100
Classic
‘96-’13 Royal Star with
2” x 3-1/8” Rubber Pad
deluxe iso ®- brake pedal pad
multi-fit
Installs easily using hidden fasteners for
a flawless appearance.
7589 Deluxe ISO® Brake
Pedal Pad
7589
lighting
Note: Requires drilling a 1/4” hold in brake pad.
accessory
mounts
iso ®- brake pedal pad
gauges &
instruments
Simply drill one hole in your existing
rear brake pedal.
handlebar
controls
8857 ISO® -Brake Pedal Pad
8857
8082 Replacement Rubber
Pads (set/3)
foot
controls
covers,
trims &
accents
Note: Requires ability to drill a 3/8” bolt hole in
center of brake pedal.
Flamin’ brake pedal pad
audio
7518
All rubber components physically
retained - no more glued on pads.
luggage
performance
7518 Flamin’ Brake Pedal Pad
the shop
Note: Requires ability to drill a 3/8" bolt hole in
center of brake pedal.
yamaha > foot controls
51
Covers, Trims & Accents
neck cover for v star 1100
A stunning replacement for the dull, stock, black
components found on your bike. The chrome-plated
contours have been smoothed & molded to provide
a flowing appearance. The right side cover has a
stylized teardrop shaped boss that surrounds the
ignition switch & leaves just its outer surface exposed.
Simple installation.
Fits: All ’99-‘09 V Star 1100 Models
7856 Neck Cover (set)
headlight
visor
chrome fork protector covers
for raider
Chrome always looks better than plain black
plastic! The stock black fork protectors are difficult
& time consuming to remove but they do help
shield against nicks & scratches. These peel-&stick chrome covers provide a classy custom
appearance while keeping the protection the
factory intended in place.
Fits: All ‘08-‘13 Yamaha Raider Models
Features a nicely finished rolled front
edge with center bullet - a big difference
that will be noticed immediately. Fastens
securely to your existing headlight for
easy installation!
Fits: All ’99-’13 Road Star Models (except
Warrior), all ’98-’10 V Star 650 Classic &
'99-'09 V Star 1100 Classic Models with
7" headlamp
2182 Headlight Visor (ea)
8699 Chrome Fork Protector
Covers (pr)
front caliper covers
This bold design evokes the look of a high
performance six piston brake caliper. With multiple
cutouts, keep the look light or install the black
back plate & cover everything up. Installs with high
strength peel-&-stick adhesive.
pushrod top covers
Fits: All ’06-’13 Roadliner, Stratoliner & Deluxe
Models, all ‘04-‘13 Road Star 1700 Models (except
Warrior), & all '08-'13 Raider Models
Connect the chrome between your valve
covers & push rod tubes on the right side
of your motor.
8701 Front Caliper Covers (set)
7759 Fits: ‘99-’03 Road Star
1600 Models (pr)
front caliper cover
rear master cylinder cover
This wicked looking cover installs in
minutes. No tools required.
Get a clean finished look in minutes.
1294 Fits: V Star 1100/1300,
Stryker & Royal Star
Venture (ea)
Fits: All ‘99-’13 Road Star
1600/1700 Models (except Warrior),
& '09-'13 V Star 950
7825 Rear Master
Cylinder Covers (ea)
52
www . K uryakyn . com
866.277.9598
1745
yamaha
9108
9106
1744
9112
9112
master cylinder covers
9106
handlebar
control covers
brake master cylinder covers
U.S. Patent D556,645 & D575,203 may apply
9105 Fits: All ’98-’07 V Star 650 & ‘99-’07 V Star 1100 (ea)
9106 Fits: All ’99-’13 Road Star & ‘02-’09 Road Star Warrior (ea)
1744 Fits: All ’07-’09 V Star 1300, ‘09-’13 V Star 950, all ‘09 V
Star 1100, ‘09-’13 V Star 650, & ’08 V Star 1100 & 650
with brake master cylinders extending 1/2” or more above
the mount clamp (ea)
Note: Master Cylinder Covers (P/N 9106) does not install with accessories that mount to
clutch or brake perch bolts.
yamaha
sold as sets
brake & clutch master cylinder covers
9112
Fits: Yamaha: ’99-’07
Road Star, all Road Star
Warrior, V Star 650
Custom
9113
Fits: Yamaha: V Star 1100
Custom
9114
Fits: Yamaha: V Star 1100
Classic/Silverado
9117
Fits: Yamaha: V Star 650
Classic/Silverado
1745 Fits: All ’06-’13 Yamaha Roadliner,
Stratoliner, Deluxe & Raider Models (pr)
clutch perch cover
9108 Fits: All ‘99-’13 Road Star, ‘02-’09
Road Star Warrior, ‘07-’13 V Star
1300, ‘99-’09 VStar 1100, ‘11-’13
Stryker, ‘99-’13 V Star 950, ‘98-’13
V Star 650 (pr)
accessories for
Cover up unsightly housings & create
a smooth, full-custom look with these
clamshell-design chrome covers. They
install easily & encapsulate the stock
housings without interfering with control
functions.
9108
marquis choke knob cover
9002
U.S. Patent 5,836,214 & D418,390
2009 ‘99-’07 Road Star
2009
reflector covers
$
1600/1700 & All Royal
Star Venture, V Star
650/1100 (ea)
multi-fit
audio
Maintain visibility while adding a stylized cover!
lighting
9002 Large Reflector Covers (pr)
Fits: Front: All Yamaha Road
Star, V Star 950, 1100, Royal
Star & Royal Star Venture,
Raider & Stryker & other
motorcycles with reflectors that
are 3-1/2” by 1-3/8” or smaller
with 1/4” of clearance around
the reflector
29.99
starter cover
accessory
mounts
7725 All ’06 -’13 Roadliner,
gauges &
instruments
Statoliner, Deluxe, &
Raider Models (ea)
7725
handlebar
controls
1062
foot
controls
shift rod linkages
covers,
trims &
accents
Direct replacement installation. Let a little of your dark side out.
luggage
Fits: All ’99-’13 Road Star 1600/1700 (except Warrior) & '08-'13 Raider Models
1061 Widow Shift Rod Linkage (ea)
1062 Zombie Shift Rod Linkage (ea)
©2008 Küryakyn
performance
1061
yamaha > Covers, Trims & Accents
the shop
53
d
b
c
a
b. top belt guard
8941
8942
a. swingarm axle adjuster cover
A two-piece creation with a removable center that allows
access for belt adjustments when needed. Select the
original or short cover to suit your style. (Sold individually)
Fits: All ‘08-‘13 Yamaha Raider Models - Fits both left &
right side of swingarm (sold individually)
Note: Only P/N 8942 installs on right side with Vance & Hines
Exhaust.
8941 Swingarm Axle Adjuster Cover (ea)
8942 Short Swingarm Axle Adjuster Cover (ea)
Simple elegance. This fully
chromed replacement guard with its turned-down
end & stylish side accents only enhance the original lines of the
rear end. Easy two bolt installation.
Fits: All ’08-‘13 Yamaha Raider Models & '06-'13 Roadliner,
Stratoliner/Deluxe
8940 Top Belt Guard (ea)
c. boomerang frame cover
This natural transition covers the black frame
rails with a flash of chrome that catches the eye &
provides a more flowing appearance.
Fits: All ’08-‘13 Yamaha Raider Models & '06-'13
Roadliner, Stratoliner/Deluxe (Covers left side only)
8943 Boomerang Frame Cover (ea)
d
Side Cover accent
A touch of chrome in just the right place to accent an
area that usually goes unnoticed. Featuring a stylish
ribbed design & made from lightweight ABS, this cover
uses ultra strong VHB tape for a secure hold & quick
installation.
Fits: All ’08-‘13 Yamaha Raider Models & '06-'13
Roadliner, Stratoliner/Deluxe
8944 Side Cover Accent for Yamaha (ea)
d. SUB-FENDER LICENSE PLATE BRACKET
with L.E.D. Curved Frame
The best single way to improve the looks of this sweet ride is to
fully remove & replace the OEM billboard with our Curved License
Plate Frame. The compact brackets clean up your rear end & allow
stock, custom, or Silver Bullet Turn Signals to be installed. The
gleaming chrome frame is illuminated with cool white L.E.D.’s built
right in. Now that’s more like it!
Fits: All ‘08-’13 Yamaha Raider Models (Holds a 4” x 7” Plate)
9258 Sub-Fender License Plate Mount with
Turn Signal Mount (ea)
54
www . K uryakyn . com
866.277.9598
yamaha
b
c/d
e
accessories for
a
yamaha
a. front drive
c. phantom covers
for road star
These little beauties cover up the axle,
adjustment bolts, & rough casting in one easy step.
pulley cover
Add the look of motion to your front drive pulley cover.
Installation takes only seconds.
Fits: All ‘99-’13 Road Star 1600/1700 Models (except
Warrior)
8960 Front Drive Pulley Cover (ea)
B. boomerang frame trim
for road star
8229 Fits: All '99-'13 Road Star (except Warrior)
(pr) Note: Right side on '07-'13 Models requires
aftermarket exhaust with
1" clearance from axle nut.
8665 Fits: All ’99-‘13 Road Star (except Warrior)
with stock exhaust or other that covers right
rear axle bolt (pr)
Note: When checking for appropriate clearance, please remember
swingarms move separate from your exhaust mounts. Compress & extend
suspension for proper clearance.
for road star
Includes all the hardware you will
need for a seamless installation.
Fits: All ‘99-’13 Road Star 1600/1700
Models (except Warrior)
8662 Boomerang Frame Trim
for Road Star (set)
d. swingarm covers
for road star
Add that extra shine in minutes
for a fraction of the price.
8262 Fits: All ’99-’13 Road Star (except Warrior)
(set) Note: Right side on ‘07-’13 Models requires
aftermarket exhaust with
1” clearance from axle nut.
8664 Fits: All ’99-‘13 Road Star (except Warrior)
tappet block covers
Bolt directly over the bottom of
your pushrod tubes, to complete the
new chromed base of your motor.
7728 Fits: All ‘99-’13 Road Star
1600/1700 & ‘02-’09 Road Star
Warrior Models (pr)
7726 Fits: ‘06-’13 Roadliner/Stratoliner/
Deluxe, ‘08-’13 Raider, all ‘99-’13
Road Star 1600/1700, & ‘02-’09
Road Star Warrior Models
(Includes 1 pair of Tappet Block
Bottom Accents Only- no lower
trim) (pr)
with stock exhaust or other that covers right
rear axle bolt (set)
Note: When checking for appropriate clearance, please remember
swingarms move separate from your exhaust mounts. Compress &
extend suspension for proper clearance.
e. lower belt guard accent
for road star
This accent is easily added to
the lower belt guard to protect
the OEM belt while covering the
black plastic.
Fits: All ‘99-’13 Road Star 1600/1700 Models (except
Warrior)
multi-fit
audio
lighting
accessory
mounts
gauges &
instruments
handlebar
controls
foot
controls
covers,
trims &
accents
luggage
performance
the shop
8663 Lower Belt Guard Accents (ea)
yamaha > Covers, Trims & Accents
55
8203
8237
8203
phantom covers for v star 650 & 1100
8236
Turn a hodge-podge of fasteners, frame tubes, axles, hubs
etc. into one smooth-sculpted chrome area. The kit includes
covers to hide the bolt heads that secure the drive housing to
the swingarm.
boomerang frame covers
for v star
650 & 1100
Easily installed, these show-chromed, die-cast frame covers make
artwork out of a part of your bike that would otherwise fade into
the background. The kit for the V Star 1100 includes a pair of
upper frame covers that smooth the transition from the Boomerang
Frame Cover to the fender.
Fits: ‘98-’13 V Star 650, ‘99-’09 V Star 1100 (‘06-’13 V Star
650 & 1100 right sides require aftermarket exhaust that allows
3/4” clearance from exhaust mount bracket & axle nut)
8203 Phantom Covers for V Star (pr)
Note: When checking for appropriate clearance on ‘06-‘13 Models please
remember swingarms move separate from your exhaust mounts. Compress &
extend the suspension for proper clearance.
8236 Fits: All V Star 650 Models (pr)
8237 Fits: All V Star 1100 Models (pr)
8203
shaft drive cover
for v star
650 & 1100
U.S. Patent D549,621
Give the rear differential the effect of a chromed
housing at a fraction of the cost. Our Shaft Drive Cover
integrates nicely with our Phantom Covers. Easy add-on with
two-bolt installation.
Fits: ’99-’09 V Star 1100 & ’98-’13 V Star 650 Models
a
8286
8286 Shaft Drive Cover for V Star (ea)
mid-frame covers for v star 1100
Turn that drab black frame tube under your seat into a real eye catcher.
When added to our Boomerang Frame Cover it looks like you’ve
chromed the whole frame! Quick & simple to install.
8255 Fits: All ’99-’09 V Star 1100 Models (pr)
2024
ferrule cover for v star
Here’s a little flash of chrome for V Star Speedo cables.
Just slip it into place & tighten the set screw.
More options
to customize your bike!
found in the multi-fit section
2024 Fits: V Star 650 Models (ea)
56
www . K uryakyn . com
866.277.9598
132
yamaha
accessories for
9253
yamaha
new brighter,
full license plate
illumination!
9252
1
Taillight can be installed on top or bottom!
3125
L.E.D. curved side
mount license holders
Unlit / Lit
In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings
the price down to reality without compromising style & function. Choose your plate then the correct Mounting
Clamps. Sized to fit 4” x 7” plates only.
license holders
9253 Chrome Curved Horizontal Side
Mount (ea)
2
9251 Chrome Curved Vertical Side
mount clamps
Required for installation of
Küryakyn Side Mount License Holders.
chrome
Mount (ea)
3175 Fits: Yamaha Road Star without swingarm
9252 Chrome Lighted Curved Vertical
covers (except Warrior) & other motorcycles
with 1-1/4” diameter swingarms (ea)
Side Mount with Taillight (ea)
3125 Gloss Black Curved Horizontal
3176 Fits: Yamaha V Star 1100/650 (ea)
Side Mount (ea)
gloss black
Note: Not intended for use with saddlebags. Please check local
laws regarding side mount license plates before ordering. M ount
Clamps required for installation - Sold separately (right).
Compliant with FMVSS#571.108 & marked SAE DOT L 11
3121
Fits: Yamaha Road Star without swingarm
covers (except Warrior) & other motorcycles
with 1-1/4”diameter swingarms (ea)
More License Plate Frames
found in the multi-fit section
134
multi-fit
audio
lighting
accessory
mounts
gauges &
instruments
handlebar
controls
foot
controls
Super Deluxe Wolo
Bad Boy Air Horn Kit
found in the multi-fit section
134
yamaha > Covers, Trims & Accents > license plates
covers,
trims &
accents
luggage
performance
the shop
57
Touring & Comfort
driver backrests
Add the comfort you need to fully enjoy those motorcycle rides with
this sleek Driver Backrest. With full adjustability, position your backrest
into the perfect spot then lean back & enjoy the ride. Designed to
allow comfortable room for passengers, it tips forward out of the
way for passenger mounting & includes a storage pouch for added
convenience. Once you relax on the road with this backrest, you’ll
wonder how you ever made it without one.
1554 Fits: ‘99-’13 Road Star 1600/1700 (except Warrior) (ea)
convenient storage pouch included!
Raptor Bar PLUS
The original just got even better! All the style you’ve come to expect now
with even more comfort thanks to the new, plusher backrest pad. At 12”
tall, this forged bar is just the right height to keep your passenger happy
& the bike looking good.
Fits: Standard Universal Metric 8-3/4” wide mounting with 1/4”-20
tapped threads - Requires mounting straps for installation (sold
separately - below)
1622
Raptor Bar Plus (ea)
1537
Backrest Mounting Straps (pr)
Fits: All ‘99-’09 V Star 1100
Note: Not intended for use with models of OEM saddlebags. Not intended to fit with
additional accessories in fender strut mounting holes.
58
www . K uryakyn . com
866.277.9598
1632
with fold - down luggage rack
1606
U.S. Patent 6,966,471 & Patent Pending
The sweeping oval bars with matching contoured
pad flows with the lines of your bike. Literally fold
down the inconspicuous luggage rack right out of the
backrest when needed & hide it away securely with the
integrated thumb-nut when you don’t. Mounts directly to
the required Küryakyn Motorcycle Specific Side Straps
for Transformer Backrest.
yamaha
transformer™ backrest
accessories for
fold down
yamaha
Fits: Küryakyn Motorcycle Specific
Side Plates for Transformer Backrest (Below)
1606 Transformer Backrest
with Fold-Down
Luggage Rack (ea)
backrest side plates
1632 Fits: All ’99-’09 V Star 1100 Models (pr)
Note: Only intended for installation of Küryakyn Transformer Backrest
(P/N 1606) that requires 5/16” mounting holes. Not intended for use
on models w/OEM saddlebags.
shown on honda
backrest components
Support: we’ve heard of its importance from politicians to footwear ads, but here’s where it hits home for you. Whether
keeping your passenger happy or providing a convenient place to secure luggage, Küryakyn is your best bet for good
looking, sturdy, & comfortable backrest components. Side plates are styled to blend in with their surroundings - right
down to the chrome hardware. Uprights; tall, short, & stylized; offer comfortable high-density pads that endure weather
extremes & miles of use. We provide extraordinary support for exceptional bikes!
select mounting straps, sissy bar, & backrest pad:
mounting straps
sissy bars
Fits: All Küryakyn backrests (except P/N 1606) or others
with 8-3/4” outside mounting dimension with .55” square
stock mounting & 1-1/4” mounting hole spacing for 1/4”20 Bolt
Fits: Küryakyn Backrest Mounting Straps (left) or
8-3/4” outside mounting dimension with .55” square
stock mounting & 1-1/4” mounting hole spacing for
1/4”-20 Bolt
1587 Short Sissy Bar 15” Tall (ea)
1537 Fits: All ‘99-’09 V Star 1100 (pr)
Note: Not intended for use with Models with OEM saddlebags. Not
intended to fit with additional accessories in fender strut mounting holes.
1588 Tall Sissy Bar 20” Tall (ea)
backrest pads
Fits: Küryakyn Sissy Bars (except Raptor or
Transformer) or other 1/2” square Sissy Bars with the
same dimensions (4” inside to inside)
5-1/4” x 9-3/4”
1587
multi-fit
audio
lighting
accessory
mounts
gauges &
instruments
handlebar
controls
foot
controls
1601 Tall Backrest Pad (ea)
covers,
trims &
accents
1602 Tall Backrest Pad with Button (ea)
luggage
1603 Short Backrest Pad (ea)
1604 Short Backrest Pad with Button (ea)
performance
the shop
5-1/4” x 7”
yamaha > touring & Comfort
59
Performance
air cleaners
alley cat air cleaner
for v - star
650
Great looks and outstanding performance, the Alley Cat is sure to turn heads.
Everything you need is all in one kit to turn your bike into a high performance
showpiece. Features include a lifetime high flow Kuryakyn designed K&N air filter
element combined with a state of the art backing plate to extract the maximum
potential from your engine.
9526 Fits: V-Star 650
Select the
perfect
9853
9422
9409
9463
9956
air cleaner for your bike!
Pro-r
hypercharger
Pro-series
hypercharger
standard
hypercharger
twin velocity
plus
skull
98-'13 V Star 650
––––
––––
9422
9853
––––
99-'09 V Star 1100
9463
9409
9423
––––
9956
99-'13 Road Star
1600/1700 (except
Warrior)
9464
9421
9420
9852
––––
U.S. Patent 5,307,771
may apply
Note: These kits contain an all-chrome air cleaner, mounting kit, & jetting necessary for carburetor models for a complete, sanitary installation. For optimum performance
& driveability on fuel injected motorcycles, we strongly recommend use of the Wild Things Fuel Injection Controller (P/N 9218 - pg 155). Note: We recommend that air
cleaner installation & jetting on the V Star be performed by a Yamaha Dealer or other qualified technician.
Don’t forget...
A Wild ThingsTM Fuel Injector
Controller (P/N 9218) will help
you fit it all together!
Find it in Multi-Fit, page 155!
Pseudo pro-r Hypercharger
Amaze everyone with the extreme performance
look of this pseudo Pro-R. Doubling as an
electrical housing, the added visual horsepower
is insane.
Fits: All ’06-’13 Roadliner, Stratoliner/Deluxe
Models & ’08-’13 Raider Models
9468 Pseudo Pro-R (ea)
60
www . K uryakyn . com
866.277.9598