CATALOGUE 2016

Transcription

CATALOGUE 2016

CATALOGUE 2016
+ 44(0)1322 407 790
www.lockdecoders.com
[email protected]
NEW
LINES
ADDED
4 - 23
Lost & Spare Key:
SuperMerc:
4-8
SuperMerc Mercedes Kits
4-5
SuperMerc Software
6-7
SuperMerc Upgrades
7
SuperMerc Extras
7-8
SuperMerc Emulators
We are the name that you can trust – the firm that brings you Tools that Really
Work – the team that creates the unthinkable advances time after time.
8
MiraClone:
9 - 20
MiraClone Base Unit
9 - 10
We have direct and continuous input into every item of hardware and software
produced by the supplier factories for our franchises.
MiraClone Cloning Packages
MiraClone Generation Packages
11
We approach the technical problems to be solved from the viewpoint
of locksmith and auto locksmiths, not as factory engineers. Locksmithing is in
our blood since 1979.
MiraClone Calculation Packages
11
We give a 12 month warranty on all mechanical components and software
and a further 12 month warranty on all electronics.
10 - 11
MiraClone Eeprom Packages
11 - 17
MiraClone Transponder List
18 - 19
MiraClone Transponder Chips
19
We also give free 6 months technical support on all equipment we sell and
we offer very inexpensive continuing technical support packages after that.
MiraClone Special Transponder Chips
We are Affiliate Members of the Master Locksmiths Association and our
Managing Director, Peter Southern, has been a member of the Auto Locksmiths
Association since 1997 and is also a Member of the British Locksmith Institute.
Peter lectures on locksmithing round the world.
SuperVAG:
21 - 22
SuperVAG Key Programming Tools
21 - 22
Where we arrange finance for you in the UK you have the added protection
of knowing that we are regulated by the Financial Conduct Authority.
About us
We back our distributors across the world and we interact with their customers
who have technical problems every day on FaceBook or by email or Skype or
by TeamViewer.
19 - 20
MiraClone Accessories & Add-ons
20
Instacode:
23
Instacode Access & Add-ons
23
Miracle Key Cutting Machines:
24 - 32
Miracle Key Cutting Machines
24 - 26
Miracle Upgrades
26 - 27
Miracle Cutters & Decoders
27 - 28
Miracle Jaws & Adapters
28 - 29
Miracle Accessories & Extras
30
Miracle Spares
31 - 32
Magic CNC Engraving Machines:
33 - 39
Magic CNC Engraving Machines
33 - 36
Magic Tools & Accessories
37 - 38
Magic Engraving Tags
38 - 39
General FAQs
2
+44(0)1322 407790
●
●
[email protected]
+44(0)1322 407790
Table of Contents
What makes us different?
39
●
●
[email protected]
3
Sprinter, Vito and Viano upto 2014
Duplicating, lost keys through electronic ignition
From original key - 90%
From electronic ignition - 40-60%
From Eeprom ignition - 90%
Soldering & Eeprom skills required
Training courses available
Portable Key Tester & Examiner (in Plus & Pro Version)
Includes IR Tools, NEC12 & EIS password licences, Key Emulator
SuperMerc Kits
NEW SUPERMERC - Original Kit
Ref: SMK 009
Lost & Spare Key
Includes:
4
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
•
•
•
•
•
EIS-EZS Password reader license
NEC prog v.12
IR Tools basic software
Eeprom programmer
Multiprog
NEW SUPERMERC - Plus Kit
Ref: SMK 001
Includes:
•
•
•
•
•
•
•
•
EIS-EZS Password reader license
NEC prog v.12
IR Tools basic software
Eeprom programmer
Multiprog
Expert Key examiner
2x Mercedes Electronic Keys
2x Emergency blades
+44(0)1322 407790
●
●
[email protected]
Includes:
Hardware:
• MB Keyprog 2 EVO main adapter
• PCB adapter: D89 main + 3 NEC PCB
• NEC IC Socket
• MB main OBD cable
• MB 38 pin cable
• USB cable
• EEPROM Programmer
• EIS/ESL Testing tool
• ESL Emulator slim type
• IR Key Tools hardware
• MB Testing key
• Mbprog HC08/12 programmer
• USB security dongle
• DATA flash memory card
• W204 OBDII/ESL K-line cable
• BE key 433 or 315 Mhz
• MB Coil detector
• WSP emulator
• WSP cable
• MB Magic Eraser + connection cable
• ML Keymaker
Software:
• MB Keyprog-2 v.1.5
• MB Keyprog Lite v.2.11
• MB Key Restorer
• NEC Prog v.12
• ECU CR1/2 Reader
• IR Tools basic software
• IR Tools EZS password reader
• IR Tools Advanced - Key Emulation
• ESL/ELV Evo Prog
• Online key calculation access
• Sonderhash registration with 3 tokens
• MB Magic Eraser software
• ML Keymaker
• MB PCF Keymaker (for ML device)
• MB Truck Keymaker (for ML device)
• Eeprom programmer
• Multiprog
+44(0)1322 407790
●
SuperMerc
SuperMerc Kit is designed to make a process of making keys for
Mercedes simple and easy. The kit enables you to save a lot of
valuable time extracting and modifying files thanks to the Remote
Kit Examiner (included in Plus & Pro Versions), while the SuperMerc
system keeps the original EIS bin-file configuration to make sure
your original ordered key will work without any problems.
Pro kit is a specially designed set of software and
hardware that covers entire set of Mercedes keys
programming. The kit covers not only new IR keys,
but also transponder keys and first generation of IR
keys (flip keys).
Pro kit contains tools that allow erasing of the
modules in Mercedes-Benz cars (including ECU’s and
gearbox) and also testing on the bench.
Lost & Spare Key
SuperMerc
NEW SUPERMERC - Pro Kit
Ref: SMK 007
●
[email protected]
5
Designed to allow the user to read hash codes/
information about keys/ password directly from
Mercedes-Benz ignition lock (EIS/EZS) through IR
port (with use of IR Tools). You can use this
information to quickly calculate and program new
key without need to desolder processor from key.
NEW SUPERMERC MERCEDES ELECTRONIC
KEY PROGRAMMER
Ref: SMK 010
With the use of the software and hardware of NEC Key
Programmer V.12 one can program keys in Mercedes Benz
cars starting 2001till 2010/2011. The set that allows you to:
• Read information from the car without the remove
• Can work in offline mode (no internet required)
• Fast key calculations
• One can program keys through the IR ports
Hardware:
• MB Keyprog 2 EVO main adapter
• PCB adapter: DB9 main + 3 NEC PCB
• IR Key Tools hardware
• USB cable & SB security dongle
• DATA flash memory card
Software:
• NEC prog v.12
• IR Tools basic software
Constantly updated software covers up to 60% of the
vehicles.
SuperMerc Upgrades
NEW SUPERMERC - Upgrade to Pro Kit
Ref: SMK 006
Upgrades your existing SuperMerc Kit to Pro
version*.
Pro kit is a specially designed set of software and
hardware that covers entire set of Mercedes keys
programming. The kit covers not only new IR keys,
but also transponder keys and first generation of IR
keys (flip keys).
Pro kit contains tools that allow erasing of the
modules in Mercedes-Benz cars (including ECU’s and
gearbox) and also testing on the bench.
2004-2010
2005-2010
1997-2001
2001-2007
2008-2010
2001-2002
2003-2008
1997-2002
2002-2008
2009-2010
2004-2009
1998-2005
2005-2010
1999-2006
2006-2010
2001-2010
2004-2010
2005-2010
2006-2010
2005-2010
2006-2010
2004-2014
2004-2015
*See full description on Page 5
SuperMerc Extras
NEW MERCEDES EXPERT KEY EXAMINER
Ref: SMK 002
Rechargeable Hand Held Device
Allows the user to test full functionality of Mercedes
Electronic Keys. Infrared, Transponder, how many
times the key has been turned and also the type.
NEW SUPERMERC MERCEDES ELECTRONIC
KEY PROGRAMMER PLUS
Ref: SMK 014
(Already included in Plus & Pro Kits)
Special SuperMerc combo, containing SuperMerc NEC Key
Programmer V.12 software & hardware, plus SuperMerc EIS/
EZS Password Reader software.
6
+44(0)1322 407790
●
SuperMerc
Vehicles covered:
A-Class W169
B-Class W245
C-Class W202
C-Class W203
C-Class W204
CLK-Class W208
CLK-Class W209
E-Class
W210
E-Class
W211
E-Class
W212
CLS-Class W219
S-Class
W220
S-Class
W221
CL
W215
CL
W216
SL
R230
SLK
R171
G-Class W463
R-Class W251
M-Class W164
GL-Class X164
Vito/Viano W639
Sprinter W906
Upgrades & Extras
NEW EIS/EZS PASSWORD READER SOFTWARE
Ref: SMK 012
Lost & Spare Key
Lost & Spare Key
SuperMerc
Software
SuperMerc Software
●
+
[email protected]
NEW MERCEDES EXPERT KEY EXAMINER
- in Fitted Case Option
Ref: SMK 011
+44(0)1322 407790
●
●
[email protected]
7
NEW MERCEDES 315 MHZ ELECTRONIC FOBS
SMK 004
MiraClone features the innovative electronic
components in the field of radio frequencies
thus allowing easy detection, reading & cloning
(duplication) of fixed code transponders and
identification of cryptographic transponder codes.
Fully re-writable via IRDA.
Preloaded to work with SuperMerc.
(Sold only for the SuperMerc Products)
MiraClone also offers complete flexibility
when it comes to providing lost & damaged
key replacement services. Once the Base unit is
purchased the functionality of the machine can be
expanded with more than 350+ Eeprom Modules
to choose from.
SuperMerc
NEW MERCEDES EMERGENCY KEY BLADE
Ref: SMK 005
Uncut key blade.
This key blade will fit a genuine Mercedes remote key.
Device can either be used as a stand alone tool or
with PC software which increases its ease of use.
SuperMerc Emulators
You can customise your MiraClone Base Unit by selecting Eeprom & Cloning packages
as and when you need them:
NEW MERCEDES SPRINTER EMULATOR
Ref: SMK 013
MIRACLONE
Lost & Spare Key
EEPROM
Base Unit
This new generation of ESL emulators was developed
to let you replace faulty or broken ESL (steering lock) in
Mercedes-Benz vehicle in order to drive it to workshop.
Package 4
Coverage:
Volkswagen CRAFTER ONLY
This new generation of ESL emulators was developed
to let you replace faulty or broken ESL (steering lock) in
VW Crafter vehicles in order to drive it to workshop.
Package 2.1
Fiat/Alfa
Japanese Bikes
Build Your Own
MiraClone
Package 2.4
Package 2.5
Hyundai/Kia
Renault/Nissan
ID 46
1. Get your MiraClone
Base Unit
Package 2.7
2. Add packages to suit
your needs
MIRACLONE
Base Unit
●
[email protected]
+44(0)1322 407790
Package 2.3
Package 3
ID 41, 42, 44, 45
Package 2.6
Package 6
Package 2.8
Package 2.9
Package 8
Toyota/Lexus
8C & ID 48
Package 2.10
Package 2.11
Package 2.12
Package 2.13
Package 2.14
Package 2.15
Package 2.16
Package 2.17
Package 2.18
Package 2.19
Package 2.20
Package 2.21
BMW CAS
Ford/Jaguar
Mercedes IFZ
Suzuki Cars
●
Package 2.2
Mazda
Peugeot/Citroen (PSA)
●
TPX2 4D
Package 9
+
Simply unplug original ESL (steering lock) and plug our
emulator in place.
Package 1
General Starter Eeprom
Mazda, Ford, Ecrypted Coding
NEW VW CRAFTER EMULATOR
Ref: SMK 008
CLONING
Starter Package 2-0
Chip Generation
Simply unplug original ESL (steering lock) and plug our
emulator in place.
+44(0)1322 407790
✓✓ Advanced Transponder Cloning
✓✓ Advanced Eeprom Functions
✓✓ Advanced Generating functions
MiraClone Base Unit
Coverage:
MB SPRINTER - W906 ONLY
8
MiraClone Base Unit
MiraClone is a professional copying and Eeprom
programming machine, that has been designed
and built to keep pace with the constant evolution
of transponder car keys.
(Sold only for the SuperMerc Products)
Honda/Acura
GM
Mitsubishi
VW Passat 3C
MiraClone
Fully re-writable via IRDA.
Preloaded to work with SuperMerc.
●
Italian Bikes
USA
VAG Porsche
Trucks
VAG
Lost & Spare Key
Extras & Emulators
NEW MERCEDES 433/434 MHZ ELECTRONIC FOBS
Ref: SMK 003
Landrover/MG
[email protected]
9
ID transponders
ID ID46, ID47, ID48, TPX2, 8E (open/close)
ID Phillips Crypto ll ID46 according to OE numbers
ID transponders in Smart keys (Toyota/Lexus)
Copy fixed code transponders (11, 12, 13, 21, 23, 33,73,4C)
Copy Phillips Crypto ID40 Unlocked (Open, Suzuki)
Copy Phillips Crypto ID42 (Ford, Seat, Volkswagen)
Copy Texas 4C with a use of EH2, TK23, TK24 & TPX1
Copy Texas 4D (60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70)
with a use of EH2 (online/offline)
Copy Texas Crypto ll 6F with a use of EH2
Copy access cards and keyrings
Unlock Megamos ID48 CR2
Unlock ID46 Chrysler, Dodge, Honda, Hyundai, Jeep, Kia
Generate fixed code transponders
Generate transponders for Mercedes C, E, G 1996-2002 (ready for use)
Manual writing of transponders (device and PC)
Archive for transponders (fixed and crypto)
Online update of software and firmware
Manual programming procedures (cars and motorcycles)
Key catalogue
Transponder info
PIN code calculation ID33 (Renault)
PIN code calculation ID46 (Kia/Hyundai)
PIN code calculation on the VIN basis (Kia/Hyundai)
Charge battery in EML keys (BMW)
Lost & Spare Key
TEXAS CRYPTO - Package 1
Ref: MIC 001
PHILIPS CRYPTO - Package 3
Ref: MIC 003
This MiraClone package will upgrade
your Base Unit to do:
• Copy transponders Texas Crypto 4D (60,
61, 62, 63, 64, 65, 66, 67, 68, 69, 6A, 6D, 70,
71, 72) with a use of TPX2
• PIN code calculation from the key for
Renault Megane (ID:60/64)
(Online with internet/offline via TPX Cloner
or PC only with no TPX cloner)
PHILIPS CRYPTO 46 - Package 6
Ref: MIC 006
8C & ID48 CLONING - Package 8
Ref: MIC 008
• Copy of transponders Philips Crypto II ID46
(1998 -2009 +): Abarth, Acura, Alfa Romeo,
Buick, Cadillac, Chevrolet, Chrysler, Citroen,
• Copy all Mazda 8C Transponders
• Copy Ford Ranger 8C Transponders
+44(0)1322 407790
●
Only for users who do not own Package 6
• Copy ID46 - TK60, TPX3 and TPX4
MiraClone Generation Packages
MIRACLONE CHIP GENERATION - Package 4
Ref: MIG 001
This MiraClone package will upgrade your
Base Unit to do:
• Generate transponders Philips Crypto
40 GM, 41 Nissan, 42 VAG, 42 Ford, 44
VAG, 44 Ford, 45 Peugeot
• Generate transponders Philips Crypto II
- more then 200 vehicles
• Generate transponders Texas Crypto 4D
(61, 62, 63, 64, 65, 66, 67, 68, 69, 70)
• Generate transponders for Abritus
devices Abritus (Mercedes ML/BMW)
(Microchip transponders)
(Microchip transponders in cards)
• Manual for remote synchronising - Europe
• Manual for remote synchronising - USA
• Locations of diagnostic sockets
• Make VAG can transponders
• Scan original VAG key for 7th byte
• Generate transponders with use of bin
file from SuperVAG
• VAG engine list
• SuperVAG functions
MiraClone Calculation Packages
MIRACLONE FORD + MAZDA CODED ACCESS - Package 9
Ref: MIC 009
MiraClone Cloning Packages
10
ID46 TOKENS 10 - Package 7
Ref: MIC 007
MiraClone Packages
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Copy Proton 8C Transponders
(via writing to a carbon transponder (ADE))
• Allows cloning to ID48 as used on
Hyundai, Kia, Daewoo, Chevrolet & Pontiac
MiraClone
Basic Version
• Dacia, Dodge, Fiat, Ford, GM, Honda,
Honda Motor, Hummer, Hyundai, Isuzu, Infiniti,
Jeep, Iveco, Kia, Lancia, Land Rover, Mitsubishi,
Nissan, Opel, Peugeot, Pontiac, Renault, Saturn,
• Suzuki, Vauxhall - using TK60 or TPX3/TPX4
• Copy transponders Philips Crypto
(41 Nissan, 42 Ford, 42 Volkswagen,
42 Seat, 44 Ford, 44 Volkswagen, 44 Seat,
44 Mitsubishi, 45 Peugeot)
• PIN code calculation ID45 (Peugeot)
●
[email protected]
Allows the users to get the Incode from the Outcode for Ford and Mazda cars upto 2010:
• Encrypted PIN coding (Outcode/Incode) using 4D Texas Crypto; Ford, Mazda, Jaguar,
Land Rover Models 2002 - 2010.
MiraClone Eeprom Packages
MIRACLONE EEPROM STARTER KIT - Starter Package 2-0
Ref: MIE 000
This MiraClone package will upgrade your Base Unit to do:
• Generate transponders with use of immo dump
• Generate transponders with use of immo bytes (3, 4 or 5 bytes)
• Precode transponders with use of immo eg. Fiat
• Generate PIN code with use of immo dump
• Generate remotes with use of immo dump
• Specialized transponder calculators Catalogue of Motorola masks
• Localisation of immo modules
• Pictures of immo modules
*Continued on page 12
+44(0)1322 407790
●
●
[email protected]
Lost & Spare Key
Base Unit & Packages
MiraClone
MIRACLONE - Base Unit
Ref: MIR 001
11
Automatic ID of immo
Editor of immo dump
Achive of immo dumps
Pictures of PCB’s
This kit will generate transponders with use of immo dump for the following 166 modules:
01. Fiat, Lancia, Alfa Romeo BSI Marelli
02. Fiat, Citroen, Peugeot CODE2 immobox
Delphi
03. Fiat, Lancia, Alfa Romeo CODE2 with BSI
Delphi
04. Opel IMMO2 immobox Siemens
05. VW, Seat IMMO2 immobox Siemens
06. VW, Seat IMMO3 immobox Valeo
07. Fiat, Lancia, Citroen, Peugeot immobox
Delphi
08. Alfa Romeo, Iveco CODE1 immobox Bosch
09. Honda, Acura immobox Megamos
10. Honda, Rover immobox Valeo
11. Fiat, Lancia IMM001.01 immobox Marelli
13. Mercedes Sprinter, Vito immobox Temic
14. VW, Skoda, Seat IMMO1 immobox Siemens
15. Renault immobox Valeo
16. Renault,Dacia immobox Sagem
17. Renault UCH Siemens
18. BMW, Rover, Mini immobox EWS
19. Toyota immobox type 1
20. Toyota, Lexus ECU Denso
21. Toyota ECU Bosch, Fujitsu
22. Toyota, Lexus ECU
23. Toyota Immobox 24C04 ID:33
24. Renault Laguna II
25. Iveco Daily/Iveco Truck immobox Bosch
26. Renault Megane, Scenic UCH
27. Alfa Romeo CODE2 immobox Bosch
28. Mitsubishi immobox Bosch
29. IMMO3 immobox Bosch
30. Peugeot, Citroen immobox Valeo
31. Mitsubishi immobox ID:4C
32. Daihatsu immobox ID:4C
33. Audi immobox Delphi
34. Nissan, Subaru immobox Siemens
35. Mercedes Sprinter, Vito immobox Temic
36. Opel IMMO1 immobox Siemens
37.Mitsubishi Cartronic Bosch
38. Peugeot, Fiat, Lancia, Citroen CPH Texton
39.Mazda immobox Temic
40. Peugeot 206 BSI Siemens
+44(0)1322 407790
●
41.Renault immobox Siemens
42. Mercedes Actros, Atego engine ECU Temic
43. Toyota ECU Bosch
44. Renault UCH Sagem type 2
45. Suzuki (Mitsubishi) immobox ID:4C type 2
46. Daewoo Immobox
47.Peugeot, Piaggio bike engine ECU Marelli
48. Volvo IMMO1 immobox Bosch
49.Toyota Avensis immobox Valeo v1
50. Suzuki immobox
51.Chrysler SKIM type 2
52. Nissan Siemens NATS-4
53. Toyota ECU Bosch type 2
54. Opel, Isuzu immobox Megamos
63. Toyota Avensis immobox Valeo v2
74. Nissan Siemens NATS-5
75. Toyota ECU Bosch type 3
78. BMW EWS4
86. Chery immobox Siemens VDO
102. Audi dashboard Magneti Marelli
103. Audi dashboard VDO
104. Audi A8 dashboard VDO
105. Samand, Saipa immobox Siemens VDO
117. Polonez immobox Megamos
121. Peugeot, Fiat, Citroen immobox Siemens
126. Volvo Cartronic Bosch
127. Skoda Octavia dashboard
137. Saab body module TWICE
138. Saab column module CIM
140. VW dashboard Bosch RB8V24
144. Seat Ibiza dashboard VDO
146. PSA BSI 95128
147. Renault BSI Valeo
148. PSA BSI 95128 type 2
149. PSA BSI 9S12
151. PSA BSI 95160
154. PSA BSI Valeo HC912
158. VW, Seat Marelli ID48
160. Golf IV dashboard Motometer
●
[email protected]
SAVE 30%
MIRACLONE FIAT/ALFA - Package 2.1
Ref: MIE 001
with Starter 2 - 0
This kit will generate transponders with use of immo dump for the following modules:
55. Fiat BSI Siemens VDO
56. Fiat, Citroen BSI Delphi
57. Fiat, Citroen, Peugeot BSI Marelli type 2
142. Iveco BSI Marelli
+44(0)1322 407790
●
145. Alfa Romeo, Fiat BSI Marelli
208. Fiat, Citroen, Peugeot BSI Marelli type 3
288. Fiat dashboard Marelli
304. Alfa Romeo, Fiat EZS
310. Fiat BSI Marelli type 4
●
[email protected]
Eeprom Packages
• Add cards (Renault) to immo
• Add transponders to immo
• Add OE keys to immo
•
•
•
•
275. Skoda Octavia dashboard VDO
276. Seat Toledo dashboard VDO
277. Audi A4 dashboard UNKSI
278. Kawasaki JetSki Ultra ECU
279. Proton Savvy immobox ID:4C
282. Opel Vectra C dashboard
283. Isuzu immobox Tokai Rika ID:4C
284. Toyota ECU ID:4C
285. Mercedes Actros, Atego ECU Temic type2
287. ChangAn Ben Ben immobox
289. Opel Corsa D display
292. VW Beetle dashboard
293. Roewe GIM
294. Volvo module CEM ID:48 type 2
295. VW dashboard VDO
296. Citroen Xantia immobox Texton ID:48
301. Skoda Fabia dashboard VDO type 2
315. Mazda ECU Mitsubishi ID:12
318. Honda, Acura ECU
321. Mercedes DAS-2 IR system
323. VW dashboard VDO type 2
324. Yamaha bikes immobox Moric type 2
327. Tata immobox
333. PSA EDC17 ECU
334. PSA BSI 95128 type 10
335. FAW Group immobox
336. Ford Galaxy ECU Visteon
337. PSA BSI 95128 type 11
338. Renault Avantime BSI
340. Fiat Sedici immobox Siemens
343. Opel Corsa dashboard
344. PSA BSI 95128 type 12
347. PSA BSI 95128 type 13
350. PSA BSI 95128 Type 14
353. PSA BSI 95128 Type 15
354. PSA BSI 95040 Type 2
NEW 360. PSA BSI Continental 95256
NEW 361. PSA BSI 95128 Type 16
NEW 362. PSA BSI 95128 Type 17
NEW 364. Audi Immobox 4B0953234
MiraClone
*Continued
161. Ford PATS Siemens
163. Toyota immobox type 4
164. SsangYong, Proton engine ECU
165. Mazda ECU Mitsubishi
170. PSA BSI 25160
177. Ford PATS SCP control module
182. Isuzu immobox Tokai Rika
183. Daewoo-FSO immobox Texton
187. PSA BSI 95040
196. Isuzu immobox Siemens VDO
197. Porsche immobox ID:13
202. Mercedes Benz ML AAM
203. Mercedes Benz ML EAM
205. Peugeot 406 BSI
209. SsangYong immobox VDO
210. Daihatsu immobox ID:67
212. Toyota ECU Denso type 2
213. Opel BCM module HC912
214. Opel REC module 95040
215. Opel ECU Delphi Delco Y17DT
216. Audi A8 dashboard VDO type 2
218. Volvo module CEM ID:48
219. Golf IV Motometer
222. Renault immobox Siemens type 2
224. Ford Bosch ID:4C
225. Toyota P/N 89661-42670 ID:4C
227. Toyota Immobox 24C04 ID:4C
231. Citroen BSI NEC
232. Ford engine ECU Visteon ID:4C
237. Opel Za ra/Astra dashboard
240. Golf IV Motometer type 2
252. Ford IMMO3 immobox Valeo type 2
253. Chery ECU Bosch
254. Tata Safari immobox Alltech
256. SsangYong immobox MOTOTECH
257. Peugeot/Citroen keyboard immobox
263. PSA BSI 95128 type 6 Johnson Control
270. VW immobox Delphi
271. PSA BSI 95160 type 5 Valeo
274. Skoda dashboard VDO
Lost & Spare Key
Eeprom Packages
MiraClone
Lost & Spare Key
12
MIRACLONE EEPROM STARTER KIT - Starter Package 2-0
Ref: MIE 000
13
51. Suzuki Bikes ECU Mitsubishi
59. Yamaha bikes immobox Moric
61. Suzuki bikes ECU Keihin
62. Honda bikes ECU Keihin
128. Suzuki bikes engine ECU Denso
MIRACLONE MAZDA - Package 2.3
Ref: MIE 003
60. Mazda dashboard YNS
66. Mazda 6 engine ECU Denso
70. Mazda 6 engine ECU Mitsubishi
82. Mazda immobox Lucas 19AS
83. Mazda immobox Lucas 34AS
89. Mazda RX-8 immobox Visteon
141. Mazda ECU Denso
188. Mazda ECU type 2
255. Proton immobox ID:8C
297. Mazda ECU Denso ID:63
312. Mazda Siemens VDO
316. Mazda ECU Denso ID:33
317. Mazda ECU Mitsubishi ID:33
322. Mazda 6 diesel ECU Denso
SAVE 30%
MIRACLONE BMW CAS - Package 2.4
Ref: MIE 004
with Starter 2 - 0
65. BMW CAS
201. BMW bikes engine ECU Bosch
NEW 246. BMW CAS4
319. BMW bikes engine ECU
SAVE 30%
MIRACLONE HYUNDAI/KIA - Package 2.5
Ref: MIE 005
with Starter 2 - 0
Lost & Spare Key
14
72. Hyundai control unit immo ID:4C
76. Hyundai control unit immo ID:4C type 2
79. KIA immo unit ID:48
90. KIA immobox Shinchang
91. Hyundai engine ECU Ke co
98. KIA, Hyundai ECU Bosch
99. KIA, Hyundai ECU Ke co type 2
181. Hyundai Control Unit ID:60
235. KIA engine ECU Bosch
264. KIA / Hyundai immobox ID:60
268. KIA immobox Texton
306. KIA, Hyundai ECU
307. KIA, Hyundai ECU Bosch type 2
320. Hyundai BSI Bosch
342. KIA ECU
349. Kia Immobox Shinchang ID 4C
SAVE 30%
MIRACLONE RENAULT/ NISSAN - Package 2.6
Ref: MIE 006
with Starter 2 - 0
67. Renault UCH Sagem type 1
68. Renault Megane UCH Siemens
77. Renault UCH Johnson Controls
80. Renault immobox Sagem
130. Nissan/Renault UCH Johnson Controls
185. Nissan NATS-6
186. Nissan BCM
193. Renault UCH Johnson Controls type 2
+44(0)1322 407790
●
200. Nissan dashboard Samsung
204. Renault Laguna III
206. Renault UCH Johnson Controls type 3
217. Renault BCM Temic
239. Renault,Dacia immobox Siemens
286. Nissan/Renault UCH Johnson Controls type 2
305. Renault Megane immobox Siemens
325. Renault, Dacia BCM Johnson Controls
●
[email protected]
69. Ford engine ECU Visteon
71. Ford PATS control module
73. Ford Focus dashboard Visteon
92. Ford Galaxy immobox
96. Ford engine ECU Siemens
97. Ford, Mazda engine ECU Siemens
120. Jaguar dashboard
131. Ford engine ECU Delphi
134. Ford Puma ECU
156. Jaguar immobox
159. Jaguar immobox type 2
166. Ford RFA Siemens VDO module
168. Ford dashboard Visteon type 2
191. Ford ECU Delphi
221. Ford PATS control module type 2
233. Jaguar dashboard
242. Ford Transit Siemens VDO
243. Ford Connect Dashboard
244. Ford PATS control module type 2
261. Ford, Mazda immobox Mitsubishi
262. Ford, Mazda ECU
332. Jaguar dashboard type 2
NEW 357. Ford Focus/Escape BCM
NEW 359. Ford ECU Bosch
NEW 363. Ford Ranger ECU Mitsubishi 8C
SAVE 30%
MIRACLONE HONDA/ACURA - Package 2.8
Ref: MIE 008
with Starter 2 - 0
88. Acura immobox
93. Honda immobox HIS5 ID48
118. Honda, Acura immobox Valeo ID:46
238. Honda immobox Valeo ID:46 type 2
Eeprom Packages
SAVE 30%
with Starter 2 - 0
260. Honda Lock immobox ID:46
269. Honda immobox ID:8E
300. Honda ECU ID:48
SAVE 30%
MIRACLONE TOYOTA/LEXUS - Package 2.9
Ref: MIE 009
with Starter 2 - 0
MiraClone
Eeprom Packages
MiraClone
with Starter 2 - 0
MIRACLONE FORD/JAGUAR - Package 2.7
Ref: MIE 007
110. Toyota immobox ID:67
111. Toyota immobox type 2 ID:67
112. Toyota immobox ID:70
195. Lexus, Toyota immobox type 3 ID:68
226. Toyota immobox Tokai Rika ID:67
234. Toyota immobox Tokai Rika ID:67 v2
346. Toyota immobox ID:6E
355. Lexus immobox ID:68
SAVE 30%
MIRACLONE MERCEDES IFZ - Package 2.10
Ref: MIE 010
with Starter 2 - 0
328. MB Siemens SWK4 736 (1D69J)
329. MB Siemens SWK4 688 (0D53J/0D62J)
330. MB Siemens SWK4 8697 (1D69J)
SAVE 30%
MIRACLONE GM - Package 2.11
Ref: MIE 011
with Starter 2 - 0
It will generate transponders with use of immo dump for the following modules:
64. Opel, Isuzu immobox Megamos v2
85. Opel IMMO2 immobox Siemens type 2
101. Daewoo, Chevrolet immobox ID:48
122. Chevrolet UCH Siemens
135. Opel/Chevrolet ECU
157. Daewoo, Chevrolet immobox ID:48 type 2
+44(0)1322 407790
●
211. Daewoo immobox ID:48 type 2
230. Daewoo,Chevrolet immobox ID:46
241. GM BCM module
250. Opel immobox Mitsubishi
314. Chevrolet immobox
331. GM BCM module type 2
●
[email protected]
Lost & Spare Key
SAVE 30%
MIRACLONE JAPANESE MOTOCYCLES - Package 2.2
Ref: MIE 002
15
84. Kawasaki bikes ECU
94. Ducati bikes dashboard Marelli
100. Ducati bikes dashboard Digitek ID:11
119. Seat, Peugeot, Piaggio immobox Marelli
125. Yamaha scooter ECU Mitsuba
132. Aprilia scooter dashboard Digitek
133. Kawasaki bikes Mitsubishi
192. Piaggio bikes ECU
194. Piaggio, Gilera bikes
199. Moto Gucci dashboard Digitek
247. Ducati bikes dashboard Digitek ID:12
311. Agusta Brutale dashboard
313. KTM bikes immobox
339. Ducati Panigale immobox ZADI
345. Piaggio bikes ECU
NEW 352. KTM Bikes Zadi Type 2
SAVE 30%
MIRACLONE TRUCKS - Package 2.13
Ref: MIE 013
with Starter 2 - 0
Lost & Spare Key
MiraClone
16
81. MAN TGA module FFR
109. Renault truck immobox Texton
139. DAF truck immobox VDO
143. VW Crafter EZS
173. Renault truck immobox ID:46
176. Scania ECU
273. Scania module Coordinator
SAVE 30%
MIRACLONE SUZUKI CARS - Package 2.14
Ref: MIE 014
with Starter 2 - 0
106. Suzuki immobox Mitsubishi
108. Suzuki ECU Denso
115. Subaru immobox Mitsubishi
124. Subaru immobox Mitsubishi type 2
174. Suzuki Liana immobox ID:46
175. Suzuki Liana immobox ID:66
207. Suzuki immobox Mitsubishi type 2
248. Subaru immobox Mitsubishi
281. Suzuki ECU
290. Suzuki ECU
309. Subaru immobox Denso
341. Suzuki Grand Vitara immobox Texton
NEW 356. Subaru BCM with Mitsubisho box
NEW 366. Suzuki BCM ID46
MIRACLONE MITSUBISHI/PEUGEOT/BRILLIANCE - Package 2.15
Ref: MIE 015
SAVE 30%
with Starter 2 - 0
87. Mitsubishi immobox ID:46
123. Mitsubishi/Smart ETACS Siemens VDO
136. Mitsubishi immobox ID:46 type 2
223. Mitsubishi ID:46
229. Mitsubishi immobox ID46 type 2
236. Mitsubishi Fuso ECU
291. Mitsubishi Etacs module
358. Subaru BCM Mitsubishi
SAVE 30%
MIRACLONE USA For Chevrolet Cars - Package 2.16
Ref: MIE 016
with Starter 2 - 0
07. Chrysler 300C immobox
116. Chrysler Siemens VDO immobox
129. DaimlerChrysler immobox
162. GM Passkey 3 Delphi
+44(0)1322 407790
●
169. Lincoln dashboard
184. DaimlerChrysler immobox type 3
198. GM Passkey 3 Delphi type 2
●
[email protected]
267. GM Passkey 3+ Delphi
SAVE 30%
MIRACLONE VAG - Package 2.17
Ref: MIE 017
with Starter 2 - 0
VAG vin precoding - writing component security to VAG CAN ID:48 with searching missing
byte from the working key.
171. VAG EDC16 ECU
172. VAG Simos PPD1 Siemens ECU
178. VAG ME 7.x Siemens ECU
179. VAG MED 9.x Siemens ECU (not crypted)
180. VAG Simos 7 Siemens ECU
266. Audi, Seat, Skoda, VW dashboard VDO
NEW MIRACLONE PEUGEOT/CITROEN (PSA) - Package 2.18
Ref: MIE 018
SAVE 30%
with Starter 2 - 0
Eeprom Packages
(PIN + Transponder)
150. BSI 95128 Type 3
151. BSI 95160
152. BSI 95160 Type 2
153. BSI 95128 Type 4
170. BSI 25160
249. BSI 95128 Type 5
251. BSI 95160 Type 4
263. BSI 95128 Type 6 Johnson Control
271. BSI 95160 Type 5 Valeo
302. BSI 95128 Type 7
303. BSI 95128 Type 8
326. BSI 95128 Type 9
334. BSI 95128 Type 10
337. BSI 95128 Type 11
344. BSI 95128 Type 12
347. BSI 95128 Type 13
348. PSA BSI 95160 Type 6
350. PSA BSI 95128 Type 14
353. PSA BSI 95128 Type 15
360. PSA BSI Continental 95256
361. PSA BSI 95128 Type 16
362. PSA BSI 95128 Type 17
MiraClone
Eeprom Packages
with Starter 2 - 0
SAVE 30%
MIRACLONE VW PASSAT 3C - Package 2.19
Ref: MIE 019
with Starter 2 - 0
The package allows you to do Passat comfort unit, non-Kessy eeprom files to a new slug key.
265. VW Passat 6/CC Comfort Module
298. VW Passat 6/CC keyless Comfort Module
SAVE 30%
MIRACLONE VAG PORSCHE - Package 2.20
Ref: MIE 020
with Starter 2 - 0
The package allows you to do the Kessy keyless entry cars.
272. VAG, Porsche Kessy Siemens VDO
280. Audi EZS ID:8E
SAVE 30%
MIRACLONE LANDROVER/MG - Package 2.21
Ref: MIE 021
with Starter 2 - 0
The package allows you to code keys
for the Land Rover Freelander Sawdock unit used around about 2002.
It also lets you code new remotes to the Pektron unit on Rover and MG
from around about 2004 to when they stopped making cars.
299. Land Rover immobox Sawdoc
+44(0)1322 407790
●
Lost & Spare Key
SAVE 30%
MIRACLONE ITALIAN BIKES - Package 2.12
Ref: MIE 012
308. MG Pektron SCU
●
[email protected]
17
18
COPY
TRANSPONDER
NOTES
CR
6E
CR
6X-6F
YES
EH2, TPX2(*), ADX
Texas Crypto 2
YES
EH2, TPX2(*), ADX
Texas Crypto - KTM genuine
Texas Crypto 2
80 bit mode
11
Temic
YES
T5, TK
70
CR
Texas Crypto - Toyota
YES
EH2, TPX2(*), ADX
12
Temic
YES
T5, TK
71
CR
Texas Crypto - Suzuki bike
YES
EH2, TPX2(*), ADX
13
Megamos
YES
T5, TK
72
CR
Texas Crypto - Kawasaki bike
YES
EH2, TPX2(*), ADX
14
Megamos-SAAB
YES
T5, TK
73
Phillips
YES
T2X
20
Sokymat
33
Phillips
YES
8CADE(*)
Blank T5
T5, T2
40
CR
Phillips Crypto
40
CR WR
Phillips Crypto
YES
T5, T2
41
CR WR
Phillips Crypto
YES
44AD3(*)
42
CR WR
Phillips Crypto
YES
44AD3(*)
44
CR WR
Phillips Crypto - VAG
YES
44AD3(*)
VAG unlocked
44
CR WR
MS
Phillips Crypto - Mitsubishi
YES
44ADS(*)
Only some keys
1999-2003
44
WR
Phillips Crypto
74
CR
Texas Crypto 3 - Toyota
8C
CR
WR
Temic Crypto - Mazda,
Proton, Ford
8C
CR
Temic Crypto
8E
CR
Megamos Crypto 2
MiraClone Transponder Chips
MIRACLONE FORD 80 BIT
Ref: FOR 001
45
CR
Phillips Crypto
YES
44AD3(*)
Ford 80 bit transponders. Can be coded as 40 or 80 bit.
46
CR
Phillips Crypto 2
YES
TK60, TPX3/4,
Carbon 46W
MIRACLONE TOYOTA 80 BIT G
Ref: TOY 001
47
CR
Phillips Crypto 3
48
CR WR
Megamos Crypto - Daewoo/
Chevrolet
YES
ID:48W
Texas
YES
EH2, TK24, TPX1,
ADX
4C
Toyota 80 bit transponders (G chip). Can be downgraded to 40 bit.
60
CR
Texas Crypto
YES
EH2, TPX2(*), ADX
61
CR
Texas Crypto - Mitsubishi
YES
EH2, TPX2(*), ADX
62
CR
Texas Crypto
YES
EH2, TPX2(*), ADX
63
CR
Texas Crypto - Ford
YES
EH2, TPX2(*), ADX
64
CR
Texas Crypto
YES
EH2, TPX2(*)
65
CR
Texas Crypto - Suzuki
YES
EH2, TPX2(*), ADX
66
CR
Texas Crypto - Suzuki
YES
EH2, TPX2(*), ADX
67
CR
YES
EH2, TPX2(*), ADX
68
CR
YES
EH2, TPX2(*), ADX
69
CR
Texas Crypto - Yamaha bike
YES
EH2, TPX2(*), ADX
6A
CR
YES
EH2, TPX2(*), ADX
6B
CR
+44(0)1322 407790
●
Excluding BMW,
Mercedes rolling
mode
MiraClone
YES
40 bit mode
Transponder Chips
TYPE
6D
MiraClone Special Transponder Chips
MIRACLONE ADX PRECODED
Ref: ADX
Cloneable (4C/4D) Carbon Transponder Chip.
Great for replacing or inserting chips in OEM key shells.
MIRACLONE ADE PRECODED
Ref: ADE
Toyota 80 Bit Transponder (G chip). Can be downgraded to 40 bit.
MIRACLONE AD3 PRECODED
Ref: AD3
Precoded Phillips Crypto 41, 42, 44 or 45 Cloneable Transponder.
(Not for Mitsubishi 44).
MIRACLONE ID46W
Ref: 46W
ID46 Generating & Eeprom functions.
●
[email protected]
Lost & Spare Key
Lost & Spare Key
MiraClone
Transponder list
MiraClone Transponder List
+44(0)1322 407790
●
*Continued on Page 20
●
[email protected]
19
MIRACLONE ID48W
Ref: 48W
The SuperVAG is a key programming tool that allows
locksmiths to read PIN and component security,
perform ODB diagnostics, check signaling as well as
find out the identification, state and diagnostic trouble
codes of vehicle’s immobilizer.
Special transponder chip for Megamos.
MiraClone Accessories & Add-Ons
It works on VAG group vehicles, including VW, Seat,
Audi and Skoda. It supports both K-Line and CAN
type systems.
MiraClone
The cable plugs in the back RS232 plug and allows the user to read
most BMW EWS 3 immo units with out desoldering external reader
for BMW EWS3.
Works with module 18.
(Requires activation of MiraClone Eeprom Starter Package 2-0)
MIRACLONE MULTI CABLE D2
Ref: MLT 001
The cable allows the user to bench test, or test in the vehicle, for
either an inoperable EZS/EIS or Infrared Key. Also used for Nats 5.
The same cable can be used to read most scooter immo units
in-ciruit without cutting holes in the unit and trying to remove the
potting compound. (Requires purchase of D2+ for the scooters and
Package 2-12)
Lost & Spare Key
External reader - testing MB EZS, works with module 74 (Nissan
NATS-5) and 44, 67 (Renault UCH).
MIRACLONE D2+ SCOOTER ACTIVATION
Ref: MLT 002
(Requires purchase of D2 accessory harness and adaptor)
Reads most Scooters in circuit. AC reader extended functions.
Works with bikes modules 47, 119, 192 and 52 (Nissan NATS-4).
MIRACLONE D2+ SCOOTER ACTIVATION
Ref: MLT 002
The cable used for the Moric 2 immo units.
Moric programmer - works with module 324 (Yamaha bikes).
MIRACLONE VW/ OPEL CABLE D4
Ref: VWO 001
Allows the user to read VW and Opel/ Vauxhall Motorola immo units
through the multiplug on the front.
Opel/VW immo1 reader - works with modules 14, 36.
+44(0)1322 407790
●
●
[email protected]
Cooperates well with MiraClone key programming
and transponder cloning device.
Functions for transponder pre-coding and key learning (adding) function: ✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
SuperVAG
MIRACLONE EWS CABLE D1
Ref: EWS 001
20
Key Programming
Precoded (44) Transponder for Mitsubishi vehicles.
Key learning/adding function Export & Preparation of data for programming transponders
Safely identify and verify the PIN & Component Security
View the status of the immobilizer Erasing the trouble code memory Automatic recognition of type of control units
Functions for remotes:
✓✓ Add remotes ✓✓ Erase remotes ✓✓ Test of remote control signal
SOLUTION FOR ALL KEY LOST SITUATIONS:
Specially designed SVG149 and SVG157 add-on cables makes SuperVAG a solution
for all KEY lost situations without soldering.
✓✓ No soldering, no need to remove needles ✓✓ No need for Eeprom programmer
✓✓ Only SuperVAG KEY and SVG 157 or SVG149 add-on cable needed
Diagnostic functions to determine the vehicle status: ✓✓ Reading and erasing of trouble code
✓✓ Memory of all control units ✓✓ Available reports and protocols
Lost & Spare Key
Accessories
MIRACLONE ADS PRECODED
Ref: ADS
SuperVAG KEY Set includes: Durable and practical case, USB or Bluetooth interface,
Installation DVD, Instruction manual.
+44(0)1322 407790
●
●
[email protected]
21
Key programming tool for VW, Audi, Skoda and Seat cars.
• Works with MiraClone
• Cars from 2008 to about 2012
• Communicate through OBD connector
• Makes it possible to read the PIN code (1999-) and component
security (2006-) which is needed for the key programming
SuperVAG
SuperVAG Comfort VW module enables: Read and write serial
memory EEPROM, Work with odometers, Reading secret numbers,
Reactivation of airbags, Cloning control units.
Codes Key Blanks
Cards
Transponders & key remotes
Airbags
Car opening techniques
ASP replacement products
Instacode Access Codes & Add-ons
SUPERVAG LOST KEY ADAPTER SVG 149 - For NEC
Ref: SVG 003
INSTACODE - Just Auto
Ref: WHS 001
This cable covers VAG VDO, VDD instrument clusters (VW, Skoda,
Seat) with NEC processor. (for example GOLF VI., Superb II, Octavia,
Jetta, ....).
Unlocks Access to Vehicle codes ONLY.
With special harness (xture) SuperVAG SVG149 lets you to plug
your SuperVAG directly to instrument cluster and from service
mode you pull out data to make a valid key.
Unlocks Access to General codes ONLY.
SUPERVAG LOST KEY ADAPTOR SVG 157 - For Micronas
Ref: SVG 004
INSTACODE - Just General
Ref: WHS 002
INSTACODE - The Works
Ref: WHS 003
Unlocks Access to both Vehicle & General codes ONLY.
This cable covers VAGinstrument clusters (VW, Skoda, Seat)
with Micronas processor.
INSTACODE - All Codes
Ref: WHS 004
With special harness (xture) SuperVAG SVG157 lets you to plug
your SuperVAG directly to instrument cluster and from service
mode you pull out data to make a valid key.
Unlocks Access to All Codes and features.
SUPERVAG ANNUAL LICENSE
Ref: SVG 002
VAG FORCE IGNITION TOOL
Ref: VAG 004
A force ignition tool for VAG cars and also an OBD tester all-in-one.
Works with all VAG cars.
●
NEW INSTACODE - Live Car Opening
Ref: WHS 010
An add-on to Just Auto, Just General and All codes.
SuperVAG Update for your yealy purchase of SuperVag updates and
technical support.
+44(0)1322 407790
Instacode
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
Expansion Licences and tools for SuperVAG Key Set to add
SuperVAG Comfort VW module:
SVG–TACH; SVG–VIN; SVG–ARB
Lost & Spare Key
InstaCode is considered the leading Key Data Software
throughout the world. With over 4 billion key codes,
and new codes added daily, InstaCode is the essential
tool for any professional locksmith worldwide.
InstaCode comes complete with up-to-date databases
for all key data systems available. Works with MiraClone.
With InstaCode you get the latest information on: Handle keys smartly!
NEW SUPERVAG TOOLBOX ADD - ON
Ref: SVK 003
22
Access & Add-ons
SUPERVAG KEY SET
Ref: SVK 001
●
[email protected]
NEW INSTACODE - Live Transponder
Ref: WHS 011
An add-on for Transponder & Remote procedures for Instacode packages.
NEW INSTACODE - Live Bitting Swapper
Ref: WHS 012
Lost & Spare Key
Key Programming
SuperVAG Key Programming Tools
An add-on to Just Auto, Just General and All codes.
+44(0)1322 407790
●
●
[email protected]
23
Designed for professional locksmiths Miracle machines use an
advanced CNC technology to support fast and accurate key
production. Equipped with high precision laser assessment system
the machines achieve high results in errorless key copying by
automatically correcting measurement miscalculations.
Key Cutting Machines
Miracle
Work with Instacode Software.
24
Main features include:
Its light-weight and compact size makes it ideal for
locksmiths on the go.
• Equipped with big 8” touch screen.
• Quick response with faster CPU.
• Supports more accurate and powerful cutting force by
using Ball screw and LM-guide.
• Provides manual operation to mill key for special purposes.
• Supports key data upgrade via Wi-Fi wireless network.
• Noise reduction with low-vibration design.
• Rapid key measurement and duplication by using both
decoder and cutter simultaneously.
• Adjustable touch screen tilt angle.
• Replaceable clamps to support various key productions.
• Light weight (19.3kg) - easy to use in narrow space and
better mobility.
• Bright LED light for night work.
• Powerful & Stable key production with 27W, 24VDC motor.
• Key production log and customer management function
are added.
• Tool tray is equipped to store tools easily.
• Both standard and laser key cut.
• Decode and cut.
• Bluetooth wireless communication & mobile device
support.
• Light-weight(13.5Kg) and compact sized machine for
easy carry.
• Built-in battery.
• Automatic key measurement.
• One clamp for holding all types of keys.
• Bright LED light for night use.
• 3-Axes operation.
• Stand-alone, automatic cutter length sensor.
• Support various power source (portable battery, vehicle
cigarette cord, AC, etc.)
●
DC Motor:
27W
The successor to the enormously popular Miracle A9.
It features many innovations to make key cutting easier and
faster for professional locksmiths. It can produce a key by
using bluetooth wireless communication between Miracle A9
Premium and any PC.
Based on the hugely popular Miracle A5 Key Cutting
machine. It is smaller, more compact with the same power.
It has a built in battery capable of cutting up to 10 keys
and can also run off mains.
+44(0)1322 407790
Weight:
24kg
NEW MIRACLE A9 PREMIUM - All-in-One Key Cutter
Ref: RED 028
MIRACLE A4
Ref: RED 050
Weight:
13.5kg
• Bit, Double bit and Laser key cutting in one machine.
• Fully automatic electronic 3 axis key cutting machine.
• Easy creation of new types of key data.
• Various bluetooth enabled devices like PDa, smart
Phone, Laptop etc.
• Bright LED light for night use.
• Key cutting history management.
• Same as original key in just 2 minutes.
• Compatable with Instacode.
Size:
260(W) x 303(H) x 360(D)mm
Miracle Key Cutting Machines
Size:
215(W) x 330(H) x 285(D)mm
Size:
265(W) x 350(H) x 340(D)mm
Spindle:
12000rpm
Miracle Key Cutting Machines are the next generation of
computerised and mechanical key cutting machines used to
create or copy a large spectrum of automobile and domestic keys,
including tubular and dimple keys.
Miracle
A computerised All-in-One Bit and Laser key cutting machine.
It is electronic 3-Axes key cutting machine which operates with
Laptop etc. Enable users to enter the code into instacode
and cut the key from the incstacode information.
●
[email protected]
+44(0)1322 407790
●
Weight:
19.3kg
DC Motor:
27W
●
[email protected]
MIRACLE A6 - Edge & Laser Key Cutter
Ref: RED 051
25
Kit includes:
New Motherboard, Tools, New style jaw like the A9, HU66
Adaptor, SX9 Adaptor, Renault Smart Key Adaptor, Manual,
Firmware update via USB, Instacode card numbers, VA2 and
VA6 all cut, HU66 extra cut, Key Center/ Tip stop sensor measurement and alignment, No more SD Card.
Miracle
Size:
288(W) x 395(H) x 340(D)mm
26
Weight:
28kg
MIRACLE A5 UPGRADE - Master Upgrade Kit
Ref: RED 081
Kit includes:
New Motherboard, Tools, New style jaw like the A9, Manual,
Firmware update via USB, Instacode card
numbers, VA2 and VA6 all cut, HU66 extra cut
Key Center/ Tip stop sensor measurement and alignment, No
more SD Card.
DC Motor:
27W
NEW MIRACLE SELECT PREMIUM - Domestic Key Cutter
Ref: RED 090
Has all the features of Miracle Select, Plus:
• Large Touch Screen • Multiple key manufacturers options
NEW MIRACLE M501 - Manual Laser Duplicator
Ref: RED 085
Miracle M501 is of a new generation of key duplicating
machines from Lockdecoders. Quickly duplicates laser &
dimple cut keys with supplied Standard Jaw.
The machine is a perfect for left and right-handed users.
• Reduced vibration levels.
• Easy and accurate tool setting.
• Suitable for cutting laser, dimple and tubular keys.
• Adjustable handle for left and right-handed users.
• Electro-mechanical decoder and cutter calibration sensor.
• Rotating angled jaw.
Size:
345W) x 440(H) x 350(D)mm
Weight:
36kg
Spindle:
10000rpm
Miracle Upgrade Kits
Please note: Old Motherboards MUST come back or you will be charged another £100.00
MIRACLE A5 UPGRADE - Standard Upgrade Kit
Ref: RED 078
Kit includes: New Motherboard, Tools, Manual, Firmware
update via USB, Instacode card numbers, VA2 and VA6 all cut,
HU66 extra cut, Tip stop sensor measurement and alignment,
No more SD Card.
+44(0)1322 407790
●
●
[email protected]
Miracle Cutters & Decoders
MIRACLE A4/A6/A5/A9
CUTTER 1.5MM
Ref: RED 016
MIRACLE MAGNUM
1.7MM CUTTER
Ref: RED 061
For the edge cut keys that
need a narrower cutter.
(example: GT10, Iveco etc.)
Also for the Miracle Select.
For Miracle A4/A5/A6/A9
Miracle Magnum 1.7mm
cutter.
T60-E15-P
T60-E17-P
MIRACLE A4/A6/A5/ A9
CUTTER 2MM
Ref: RED 002
MIRACLE A9 DIMPLE
CUTTER 1MM
Ref: RED 073
6mm x 2mm cutter.
New modied cutter.
Miracle A9 Dimple Cutter
1mm.
MIRACLE A9 DIMPLE
CUTTER
Ref: RED 018
MIRACLE A4/A6/A5/A9
DECODER TIP
Ref: RED 003
Cutter for cutting all
Multilock Dimple keys.
0.6mm wide
Decoder tip for use with our
machine. Not for use with
the MT5+ & Cadnam keys.
T60-E20-P
T60-DC10-45
T60-DC06-45 - New part
T60-MC06-45 - Old part
T60-P10
MIRACLE A9
ENGRAVING CUTTER
Ref: RED 060
MIRACLE A9 1MM END
MILL CUTTER
Ref: RED 017
Miracle A9 Engraving Cutter.
Miracle 1.mm Cutter End Mill
T60-MC00-45
T60-E10-P
+44(0)1322 407790
●
●
[email protected]
Upgrade Kits & Cutters
An automated key cutting machine for single pattern
specialized keys such as Magnum, Multilock, Yale, Abus, AVA
set, Abloy, Locxis etc. It provides an easy way to cut special
types of keys and offers a simple and fast way of selecting
and cutting keys. It will be most suitable for locksmiths who
cut special type of keys in volume everyday in shop.
• Duplicating keys.
• Cutting keys by bitting number input.
• Tilting vice.
• Spindle driven by two spindle belts.
• Automatic key and tool measurement
• 3-Axis operation & 3 Built-in tools.
Miracle
MIRACLE A5 UPGRADE - Super Upgrade Kit
Ref: RED 079
MIRACLE SELECT - Domestic Key Cutter
Ref: RED 052
27
Ref: RED 025
MIRACLE A9 DIMPLE
KEY JAW
Ref: RED 031
Decoder for decoding
dimple keys.
Miracle A9 1.2mm Dimple
Cutter.
Standard jaw designed for
auto keyway applications.
Add-on jaw designed for
dimple keyway applications.
MIRACLE MT5+
& CADNAM DECODER
Ref: RED 056
NEW MIRACLE M501
2.5MM CUTTER
Ref: RED 052
CP-86
CP-88
MIRACLE MAGNUM KIT
6mm x 2mm cutter.
New modied cutter.
Miracle M501 2.5mm Cutter.
MIRACLE A9
TUBULAR JAW
Ref: RED 024
T60-E20-P
T60-E25
NEW MIRACLE M501
2.5MM DIMPLE DECODER
Ref: RED 091
NEW MIRACLE M501
5MM CUTTER
Ref: RED 092
Add-on jaw for tubular key
applications.
Jaw turns 14 Degrees Left
and Right for Dimple cuts.
CP-87
Miracle M501 2.5mm
Dimple Decoder
Miracle M501 5mm Cutter.
Includes:
• Magnum jaw
• 1.5mm Cutter
• Dimple Multilock
• Dimple Decoder
T60-P10M T60-P10D
T60-DC12-45
Miracle
T60-P25
NEW MIRACLE M501
5MM DECODER
Ref: RED 093
Miracle M501 5mm Decoder.
Requires M501 Tubular
Adapter.
Jaw turns 14 Degrees Left
and Right for Dimple cutting.
Requires M501 Tubular
Adapter.
MIRACLE A9 ABLOY
SINGLE SIDED JAW
Ref: RED 095
MIRACLE ENGRAVING
CLAMP & CUTTER
Ref: RED 059
T60-E50
Abloy clamp for Miracle A9
Includes the Cutter for the
jaw. 1x supplied.
Allows the ability to engrave
keys and dogtags etc.
28
MIRACLE TIBBE
ADAPTOR
Ref: RED 013
For all models.
Clamp for Ford and Jaguar.
MIRACLE A4/A6/A5/A9
FO19 ADAPTOR
Ref: RED 019
MIRACLE RENAULT
SMART KEY VA2 ADAPTOR
Ref: RED 075
For the Silca FO19 key as
used on the Ford, LDV and
London Taxis.
Miracle Renault Smart key
Adaptor. For use with the
Renault smart key cards.
MIRACLE SX9 ADAPTOR
Ref: RED 076
MIRACLE A9 DOMESTIC
JAW
Ref: RED 023
For use with the Peugeot,
Citroen cars using SX9
cruciform.
Add-on jaw to cut single
sided domestic commercial
keyways.
+44(0)1322 407790
CP-87
CP 104 & CP104A
CP-102
MIRACLE HU66
ADAPTOR JAW
Ref: RED 026
CP-61
CP-62
MIRACLE A9 & SELECT
MAGNUM JAW
Ref: RED 053
For use with the Miracle
M501 machine for Tubular
Key cutting.
Miracle Jaws & Adapters
CP-105
Ref: RED 058
CP-109
NEW MIRACLE SELECT
MULTI LOCK JAW
Ref: RED 054
Multi Lock jaw for Miracle
Select.
CP-107
NEW MIRACLE M501
STANDARD JAW
Ref: RED 094
NEW MIRACLE M501
TUBULAR ADAPTOR
Ref: RED 086
For cutting Lazer & Dimple
keys. Does not rotate
Includes Adapter, Decoder
& Cutter.
NEW MIRACLE M501
35o ROTATING JAW
Ref: RED 087
NEW MIRACLE M501
45o ROTATING JAW
Ref: RED 088
Dual angled jaw from 0o
up to to 35o Degrees with
clamping jaws on either
side.
Dual angled jaw from 0o
up to to 45o Degrees with
clamping jaws on either
side.
Jaws & Adapters
MIRACLE A9 AUTO JAW
Miracle
MIRACLE A9 1.2MM
DIMPLE CUTTER
Ref: RED 011
Cutters & Decoders
MIRACLE A9 DIMPLE
DECODER
Ref: RED 015
T60-E50
●
●
[email protected]
+44(0)1322 407790
●
●
[email protected]
29
MIRACLE A6/A9
POWER SUPPLY
Ref: RED 055
MIRACLE A5/A9
DRIVER BOARD
Ref: RED 043
MIRACLE A5
MOTHERBOARD
Ref: RED 040
Main power supply for A5.
Main Power Supply for A6/
A9.
Spare driver board for
Miracle A5 & A9
Spare motherboard for
Miracle A5.
MIRACLE 240V POWER
LEAD - UK
Ref: RED 034
MIRACLE 240V POWER
LEAD - AUSTRALIA
Ref: RED 036
MIRACLE A6
MOTHERBOARD
Ref: RED 074
MIRACLE A9
MOTHERBOARD
Ref: RED 057
240V UK lead for power
supply.
For all Miracle models.
240V Australia lead for
power supply.
Miracle A6.
Miracle A9.
MIRACLE 240V POWER
LEAD - EU
Ref: RED 035
MIRACLE T WRENCH
MIRACLE A9 BLUETOOTH
& USB BOARD
Ref: RED 067
MIRACLE A5/A6/A9
CONNECTOR BOARD
Ref: RED 066
240V EU lead for power
supply.
Hex 2.5mm.
Miracle A9 spare Bluetooth/
USB Board.
CP-T25
EP-41U
Connector board for Miracle
A5/A6/A9.
MIRACLE A5/A6/A9
USB SD CARD READER
Ref: RED 029
MIRACLE TIP STOP
SPACER
Ref: RED 049
MIRACLE A5
BLUETOOTH BOARD
Ref: RED 042
MIRACLE A4/A5/A6
KEYBOARD
Ref: RED 084
Special USB SD card reader.
Right to Left Stop Guide.
Miracle A5 spare Bluetooth
Board.
Spare keyboard for Miracle
A4/A5/A6.
CP-97
CP-96
MIRACLE STOP GUIDE
Ref: RED 005
MIRACLE TOOL HOLDER
Ref: RED 048
MIRACLE A5
LCD SCREEN
Ref: RED 041
NEW MIRACLE A6
LCD SCREEN
Ref: RED 083
Special Miracle stopper.
Holds cutters and decoders.
Spare screen for Miracle A5
Spare screen for Miracle A6
CP-97
CP-98
MIRACLE A5/ A9
MOUNTING BRACKETS
Ref: RED 012
MIRACLE AUXILIARY
TOP JAW ADAPTOR
Ref: RED 021
MIRACLE A9
DC NOISE FILTER
Ref: RED 071
NEW MIRACLE A9
REFURBISHED TABLET
Ref: RED 101
Mounting brackets for
Miracle machines.
For narrow keys. Clamps
the key down for additional
support.
Miracle A9 DC Noise filter
board.
BP-95
CP-92
Refurbished tablet.
Carries 3 month warranty.
Old tablet must come back
or you will be charged
£600.00
NEW MIRACLE A9
TOP SWARF TRAY
Ref: RED 022
NEW PLASTIC SAFETY
SHIELD
Ref: RED 100
MIRACLE EMERGENCY
OFF SWITCH FOR A6/
A9/SELECT
Ref: RED 077
MIRACLE
PHOTOSENSOR BOARD
Ref: RED 070
Swarf tray for Miracle A9
Protective plastic clear plate.
Goes inside the front metal
shield for safety.
Miracle Emergency Off
Switch for A6, A9 and Select
Spare photosensor board.
CP-94
Ref: RED 008
+44(0)1322 407790
EP-01
EP-02R
EP-02
EP-41
EP-27
EP-43
BP-17
●
EP-05
●
[email protected]
EP-37B
+44(0)1322 407790
●
EP-03
Miracle
CP-03
Spare Parts
MIRACLE A5
240V POWER SUPPLY
Ref: RED 009
BP-92MA6
30
Miracle Spare Parts
EB-12
EP-28
Accessories & Extras
Miracle
Miracle Accessories & Extras
EP-15
●
[email protected]
31
DC motor for Miracle A9.
HP-34
HP-32
MIRACLE
STEP MOTOR X,Y
Ref: RED 047
MIRACLE STEP MOTOR Z
Step motor axis X,Y for
Miracle models.
Step motor axis Z
for Miracle models.
BP-01
BP-02
MIRACLE A5
KEY PAD STICKER
Ref: RED 044
MIRACLE A6 KEY PAD
STICKER
Ref: RED 065
Miracle A5 key pad sticker.
Miracle A6 key pad sticker.
Ref: RED 062
Miracle
BP-71MA5
CP-T25
MIRACLE A9 TOUCH
SCREEN STICKER
Ref: RED 063
MIRACLE A4/A5/A6/A9
CUTTER HEAD
Ref: RED 045
Touch screen sticker for
Miracle A9.
Cutter head for Miracle A4,
A5, A6, A9.
BP-71MA9
HP-15
MIRACLE SPINDLE BELTS
Ref: RED 007
MIRACLE A4 BATTERY
Ref: RED 096
Pair of spindle belts for
Miracle models.
3mm x 40mm
Replacement battery for
Miracle A4.
CP-SB35
CP-66
MIRACLE
TIBBE GRUB SCREW
Ref: RED 068
MIRACLE
FASTENING BOLT
Ref: RED 006
Spare screw for Miracle
models.
Spare fastening bolt spindle.
All Miracle models.
Package of 10.
BP-95
CP-95
MIRACLE
TIBBE SIDE SCREW
Ref: RED 022
Spare tibbe side screw with
ball plunger. For all Miracle
models.
CP-61-BP
32
+44(0)1322 407790
●
●
[email protected]
CNC Engraving Machines
DC motor for Miracle A5.
Magic CNC Engraving Machines stand out by
their compact size, elegant design and virtually
silent operation.
From basic to advanced models Magic Engravers
produce excellent quality results, leaving the
engraved surface smooth to touch with indelible
high gloss nish achieved by using an engraving
probe made with industrial diamond.
Designed to be easily handled in operation,
Magic machines can efficiently engrave on all
metal surfaces, including gold, silver, copper,
stainless steel, aluminium and also on selective
plastic, glass and natural materials.
✓✓
✓✓
✓✓
✓✓
Every Magic machine comes with simple to use
MagicArt software letting you enjoy so very
many engraving options as well as full support of
custom fonts and vector graphics.
Virtually Silent Engraving
Ultra High Speed
Energy Efficient & Durable
Auto Laser Measurement
Magic CNC Engraving Machines
Magic
MIRACLE A9 DC MOTOR
Ref: RED 072
NEW MAGIC 2P - Compact Engraving Machine
Ref: MAG 002
Magic 2P is a portable professional jewellery and metal
engraver capable of engraving on all metal surfaces as well as
on selective plastic and natural materials.
Perfect equipment for small shops and mobile locksmiths,
offers fast and uncomplicated engraving of medals, tags,
padlocks or ID bracelets.
• Compact & Light weight.
• Bright LED light.
• Equipped with Diamond tool high performance & smooth
glossy finish.
• Stores upto 126 text les and 96 logo files.
• Engraves all pre-installed user fonts.
• Vector Graphics support.
• Multi-purpose clamp - holds most materials.
• Software is easy to use and setup.
Size:
(W)260 x (D)310 x (H)235mm
Weight:
17.5kg
P. Consumption:
12W
Size:
(W)120* x (D)100* x (H)30mm
Tool Type:
Diamond
Tool Size:
4mm
+44(0)1322 407790
●
●
[email protected]
Engraving Machines
Spare Parts
MIRACLE A5 DC MOTOR
Ref: RED 046
33
Engraving Machines
Magic
*Sold separately
34
Size:
(W)288 x (D)355 x (H)303mm
Weight:
24.6kg
P. Consumption:
12W
Max. Engraving Area:
(W)140* x (D)100* x (H)30mm
Tool Type:
Diamond
Tool Size:
4mm
• Depth regulating nose for high quality results on uneven
or curved surfaces.
• Perfect for large size projects.
• Suitable for multi key engraving*.
• Automatic 5 sensor laser measurement for precision in
engraving and cutting.
• Open-back design for working with irregular sized materials.
• Slide-in mechanism for easy clamp changing.
*Sold separately
Size:
(W)470 x (D)455 x (H)375mm
Weight:
38.5kg
P. Consumption:
47W
NEW MAGIC 30P - Versitile Engraving & Cutting Machine
Ref: MAG 003
(W)300*x (D)200*x (H)38.5mm
Speed:
14000rpm
Tool Size:
4mm
Equipped with laser sensors Magic F30P offers precision & superior
quality results even when used on delicate, uneven or raised
surfaces. Powerful motor, simple interface and big size enables
anybody to engrave, cut and carve things in a quick and easy way.
Can engrave up to 14 keys with a special multi key clamp*.
NEW MAGIC R - Compact Ring Engraving Machine
Ref: MAG 034
•
•
•
•
•
•
•
•
Bright LED light.
Suitable for multi key engraving*.
Cuts nameplates and two-colour house signs.
Carves wax, chemical wood etc. in 3D*.
Slide-in mechanism for easy clamp changing.
Rubber stamp making*.
Engraves on curved surfaces.
Vector Graphic support.
Designed for the engraving of the inside & outside circumferences
of rings. A laser pointer reliably marks the area to be engraved
for error-free results. Symbols, Chinese characters, signatures,
fingerprints and all kinds of patterns can be engraved as well as
various fonts and numbers.
• Engraves on all metal.
• Engraves both internal and external diameter of rings.
• Comes with a chuck finger for fastening rings of various
styles and sizes.
• Depth of engraving is sufficient enough to be indelible.
• Sensors automatically measure the ring size prior to engraving.
• Laser pointer for errorless engraving.
• Vector Graphic support.
*Sold separately
*CAD Software is required
*Heat Press is required
Size:
(W)465 x (D)388 x (H)278mm
Weight:
28.5kg
P. Consumption:
47W
Size:
(W)260 x (D)303 x (H)243mm
Weight:
17kg
(W)300*x (D)200*x (H)38.5mm
Speed:
14000rpm
Tool Size:
4mm
Max. Outer Diameter:
30mm
Tool Size:
3.15mm
+44(0)1322 407790
●
●
[email protected]
+44(0)1322 407790
●
●
[email protected]
• Open-sided for handling lengthy materials.
• Suitable for multi key engraving*.
• Equipped with Diamond tool for high performance &
smooth glossy finish.
• The depth of engraving is indelible.
• Engraves all pre-installed user fonts.
• Fastens most material without changing the clamp.
• Engraves on curved surfaces.
Large and versatile Magic F300P is an advanced professional
engraving, cutting and carving machine designed to handle
large industrial marking projects as well as craft and art making.
The engraving process made easy with a 5-sensor auto
measurement technology. Equipped with graphic LCD screen
Magic F300P has all the features of the advanced Magic models
plus an ability to engrave on thick material up to 75mm.
Magic
Magic 20 comes with an open wall design to suit engraving
on long, bulky or irregular shaped materials and a built-in
communicational port to engrave with external tablet without
using a computer. Can engrave up to 5 keys with a special
multi key clamp*.
NEW MAGIC F300P- Large Multifunctional Engraving,
Cutting & Carving Machine
Ref: MAG 021
Engraving Machines
NEW MAGIC 20 - Compact Engraving Machine
Ref: MAG 001
35
NEW MAGIC
DIAMOND ENGRAVING
TIP FOR RINGS
Ref: MAG 035
Ref: MAG 007
Size: 4mm
Use: Magic 2/20/F30P/
F300P/50/70
Size: 9mm
MAGIC CARBIDE
ENGRAVING TIP
Ref: MAG 006
MAGIC CARBIDE
+ DIAMOND ENGRAVING
TIPS PACK
Ref: MAG 031
Size: 4mm
F300P/50/70
Size: 4mm
F300P/50/70
NEW MAGIC V-CUTTER
10O ANGLE
Ref: MAG 013
NEW MAGIC V-CUTTER
35O ANGLE
Ref: MAG 008
NEW MAGIC 70 - All-in-One 4 Axis Engraving & Cutting Machine
Ref: MAG 023
10o(A) - 0.05mm(W)
For wax, wood, acrylic carving
Use: Magic F30P/70/F300P
35o(A) - 0.05mm(W)
Magic 70 is an advanced all-in-one versatile CNC engraving &
cutting machine with 4 axes able to quickly and easily engrave on
pendants, the inside and outside diameter of rings and bangles,
creating beautiful and indelible letters or patterns.
NEW MAGIC V-CUTTER
45O ANGLE
Ref: MAG 014
NEW MAGIC END MILL
CUTTER 0.3MM
Ref: MAG 017
45o(A) - 0.05mm(W)
Size: 0.03mm
For name plate cutting
NEW MAGIC END MILL
CUTTER 0.6MM
Ref: MAG 015
MAGIC END MILL
CUTTER 1MM
Ref: MAG 022
Size: 0.06mm
Size: 1mm
NEW MAGIC MULTI
KEY ENGRAVING CLAMP
- 5 KEYS
Ref: MAG 032
NEW MAGIC MULTI
KEY ENGRAVING CLAMP
- 14 KEYS
Ref: MAG 033
Comes with PC Software
Marks up to 5 keys per
session.
Comes with PC Software
Marks up to 14 keys per
session.
Use: Magic 20
Use: Magic F30P/F300P
•
•
•
•
•
•
•
•
•
•
Engraves on all metal.
Bright LED light.
Engrave both inside and outside of rings/bangles.
Built-in inside-ring/bangle tool (L-Tool).
Bangle engraving is available (Max diameter 83.5mm).
LCD screen shows machine status and user guidelines.
Slide-in mechanism for easy clamp changing.
Fastens most material without changing the clamp.
Diamond tool for smooth glossy finish.
Vector Graphic Support.
Size:
(W)395 x (D)394 x (H)375mm
Weight:
31kg
Outer Diameter:
83.5mm
(W)140*x (D)100*x (H)38.5mm
Tool Type:
Diamond
P. Consumption:
27W
• Engraves and cuts every type of metal.
• Engraves & cuts both inside and outside of rings and
bangles (Max. diameter 93mm).
• Supports 3D carving of cylindrical wax on rings*.
• Built-in L-Tool for ring and bangle engraving.
• Supports Lithophane engraving.
• Equipped with RPM controller for spindle revolution speed
change.
• Slide-in mechanism for easy clamp changing.
• Compatible with 2D/3D CAD/CAM Software.
• Engraves on curved surfaces.
• Full vector and pre-installed user fonts support.
• Comes with a complete tool accessories pack.
*CAD Software is required
Size:
(W)395 x (D)394 x (H)375mm
Weight:
32.5kg
Outer Diameter:
93mm
(W)140*x (D)100*x (H)38.5mm
Speed:
15000rpm
P. Consumption:
47W
+44(0)1322 407790
●
●
[email protected]
+44(0)1322 407790
Use: Magic R/50
●
●
[email protected]
Tools & Accessories
MAGIC DIAMOND
ENGRAVING TIP
Magic
Magic 50 is an advanced professional ring engraving machine
designed for the engraving on both cylinder and at surfaces.
Compact, silent and powerful Magic 50 can perform detailed
engraving on both internal and external circumference of rings
and bangles.
Engraving Machines
Magic
Engraving Machines
36
Magic Tools & Accessories
NEW MAGIC 50 - Ring & Flat Engraving Machine
Ref: MAG 004
37
For pen engraving
MAGIC CUTTING CLAMP
Ref: MAG 009
MAGIC PADLOCK CLAMP
For cutting name plates etc.
Use: Magic F30P/F300P/70
For padlock engraving
MAGIC PIN CLAMP SET
Ref: MAG 027
MAGIC PIN SET
Ref: MAG 028
Perforated pin clamp set for
holding odd sized materials.
Use: Magic 2/20/F30P/50/
F300P/70
Set of 6 pins
For pin clamp
Use: Magic 2P/20/F30P/50/
F300P/70
MAGIC SPINDLE BELT
Ref: MAG 029
MAGIC FLAT-TYPE CLAMP
Ref: MAG 025
Size: 50mm
Use: Magic 20/50/70
Ref: MAG 011
MAGIC FLAT-TYPE CLAMP
- LARGE
Ref: MAG 026
Engraving Machines
DOG BONE TAGS
WITH TAB - SILVER
Ref: MAG T07
DOG BONE TAGS
WITH TABS - GOLD
Size: 37 x 21mm
Packaged in bags of 10
Size: 37 x 21mm
HEART TAGS
WITH TAB - SILVER
Ref: MAG T04
HEART TAGS
WITH TABS - GOLD
Ref: MAG T03
Size: 27 x 24mm
Size: 27 x 24mm
Ref: MAG T08
General FAOs:
How soon will I receive my order?
We accept all major debit and credit cards excluding American Express.
No surcharge applies when you pay by debit card.
CAT TAGS - GOLD
Ref: MAG T12
Size: 22 x 30mm
Size: 22 x 30mm
CIRCULAR TAGS
WITH TAB - SILVER
Ref: MAG T02
CIRCULAR TAGS
WITH TAB - GOLD
Size: 27 x 27mm
Size: 27 x 27mm
DIAMANTE HEART
TAGS - SILVER
Ref: MAG T13
DIAMANTE HEART
TAGS - GOLD
Ref: MAG T14
Size: 34 x 30mm
Size: 34 x 30mm
DOG FACE TAGS - SILVER
Ref: MAG T09
DOG FACE TAGS - GOLD
REF: MAG T10
Size: 30 x 27mm
Size: 30 x 27mm
Ref: MAG T01
●
Size: 20 x 20mm
How do I pay?
CAT TAGS - SILVER
Ref: MAG T11
+44(0)1322 407790
Size: 20 x 20mm
If you are resident in the UK and placed your order before 12:00h, you should receive
your order the next day.
Magic Engraving Tags
38
SQUARE TAGS
WITH TAB - GOLD
Ref: MAG T06
Engraving Tags
For medal engraving
SQUARE TAGS
WITH TAB - SILVER
Ref: MAG T05
Magic
MAGIC PEN CLAMP
Ref: MAG 012
●
[email protected]
What if I change my mind?
You are entitled to cancel your order and return the goods within 7 working days
for a refund, excluding the cost of delivery. Your refund will be forwarded to you.
Normal return conditions apply.
Is my machine covered by warranty?
Yes. All our electronic items come with 12 months warranty, which covers repair
and replacement of faulty goods.
The warranty does not cover batteries and consumables.
If I have a problem with installing or using my machine
what should I do?
FAQs
Accessories & Tags
Magic
MAGIC MEDAL CLAMP
Ref: MAG 010
We provide free technical support cover for a period of 6 months from the date
of purchase. Thereafter an annual fee is payable.
For technical support please call on +44(0)1322 407760 Please have your machine’s
Serial Number ready. Our lines are open from 9:00 to 17:00 - Monday to Friday.
Alternatively, you can get in touch via email [email protected]
+44(0)1322 407790
●
●
[email protected]
39
Lockdecoders - Bringing you tools that really work
+ 44(0)1322 407 790 • [email protected] • www.lockdecoders.com
Address: Lockdecoders Ltd, Unit 14 Park Road Industrial Estate, Park Road, Swanley,
Kent, BR8 8AH, United Kingdom
For our terms of delivery and payment please go to www.lockdecoders.com
Lockdecoders Ltd registered in England & Wales 07571903

CATALOGUE 2016

Transcription

Similar documents

Cokin Mineral ND Filters technical sheet.indd

FUENTE RUTA DEL QUIJOTE ENGLISH

Ultherapy. As Seen In Us Weekly Magazine…

Eucharistic Miracles and Saints

ECLIPSE ECLIPSE

cataloguefor website

FRIDAY (Page 1) - Weir`s Furniture

3 pages written 28 Apr 1852 by Charles H Louis Pelichet in

Ghost Man on Third

To use media clips to understand the different