Chainsaw Protective Trousers

Clothing
Wessex fire coat & trousers
Wfire
e scoat
s ex
&
trousers
JBS Ref No.
Fire coat: W/A
Trousers: TC/B
Diagrams
®
Delta T
Dark Navy
Brigadier Blue
Orange
Yellow
NOMEX
®
Z200™
Dark Navy
Available colours
Inferno
2
Pbi ®
Gold
Kermel HTA
Dark Navy
The philosophy of the Wessex fire coat was to produce
a comfortable and practical garment, without any
compromise to safety, in a common design, attractive
to many brigades. The result has proven highly
successful and this range is now a particular favourite
with many brigades in Ireland and the UK as well as
other countries worldwide.
AVAILABLE EX-STOCK IN NOMEX ® DELTA T,
DARK NAVY OR ORANGE, STANDARD STYLE
Extremely lightweight
Traditional bunker length
Internal Kevlar felt shoulder pads to protect
against BA compression
Two outer coat pockets, positioned to avoid contact
with BA straps
Heavy moulded zip covered with Velcro front fastening
Four internal pockets
One row of 50mm silver 3M reflective tape (also
shown: two rows 50mm silver and yellow)
Meets Gore Rain Room Test
Wessex Coat available in sizes: Small, Medium,
Large, X-Large, 2X-Large, 3X-Large, 4X-Large
Wessex Trousers available in sizes: Small, Medium,
Large, X-Large, 2X-Large, 3X-Large
Can be tailored to suit any specification – see range
of technical solutions available on pages 12-15.
Note: The above specification refers to the garments in the photograph –
many other styles are available to meet specific customer requirements.
Information
These fabric colours are readily available. However, other
non-standard colours are obtainable, subject to availability.
NOMEX
Wessex fire coat & trousers
Clothing
Complies with standards
EN 469
W.L.Gore & Associates Rain Room Test
3
Clothing
Ergotech fire coat and trouser
Ergotech
fire coat
&
trousers
JBS Ref No.
Fire coat: E2/A
Trousers: TE2/A
Diagrams
These fabric colours are readily available. However, other
non-standard colours are obtainable, subject to availability.
Paris blue
Yellow
Orange
Red/orange
Desert tan
Red
Grey
PBI
Gold
Available colours
Available to order:
Black, navy, red
4
Also available to
order:
PBI Matrix.
Using the latest materials, designed in collaboration
with the world’s leading fabric producers, the Ergotech
range provides improved fit, wearer comfort, and a
lighter weight ensemble, without compromising on any
levels of operational protection.
Minimizing wearer heat stress has been key to the
design process; the Ergotech range helps reduce
internal body heat build up for greater safety under
extended operational conditions.
Usual fabric combinations:
 XR2 Hainsworth TITAN
 M10 Gore-Tex Airlock
 N21ME Nomex Viscose Lining
 PS1 PBI
 M10 Gore-Tex Airlock
 N21ME Nomex Viscose Lining
Ergotech coat model E2/A
 Tapered girth with sleeve featuring articulated
construction and underarm gusset
 Closed cell foam padding to shoulders and elbows
 Extended lined and laminated zip flap
Ergotech trouser model TE2/A
 Articulated seat and knee construction for greater
wearer comfort and manoeuvrability
 Arashield external knee panels with closed cell foam
and Kevlar felt padding
SizesChest/waist: small-4XL
Height fittings: short, regular, tall and extra tall
28 male and female sizes
Complies with standards: EN469:2005 Level 2
Information
XR2 Hainsworth
TITAN
B-Tech fire coat and trouser
B-Tech
fire coat
Clothing
&
trousers
JBS Ref No.
Fire coat: BT/A & BT/B
Trousers: TBT/A & TBT/B
Diagrams
These fabric colours are readily available. However, other
non-standard colours are obtainable, subject to availability.
Available colours
Dark navy
Brigadier blue
Orange
Yellow
B-Tech is Bristol’s entry level for a structural firefighting
coat and trousers to EN469:2005 Level 2. The short style
coat is designed with ergonomic fit. The trouser measurements provide adequate overlap, so that there is no
gap between coat and trousers when bending.
Features: Coat
 Two outer lower welt pockets with mitred flaps
 One internal patch pocket
 Plain cuffs with Neoprene anti-wicking barrier
 Neoprene anti-wicking barrier in hem
 Hanger loop on under collar
 Moulded zip front with velcro fastened flap Neoprene lined
 Flip back throat tab Gore-tex lined
 Articulated sleeves
BT/A with silver reflective
BT/B with triple trim reflective
Trousers
 Standard waist trousers with side elastication
 Fixed braces crossed at back
 Back seat with yoke
 Self cloth outer curved kneepads, twin stitched seam
and Aramid felt internal knee pads
 One internal hip patch pocket
 Plain trouser hems with Neoprene anti-wicking panels
TBT/A with silver reflective
TBT/B with triple trim reflective
Usual fabric combination:
M03 Gore-tex Fireblocker
Q02 FR Felt quilted to FR Cotton lining
Sizes: Chest/waist: Small to 4XL
Height fittings: short/regular/tall/extra tall
28 male and 28 female sizes
Complies with Standards: EN469:2005 Level 2
Information
Standard
Colours
5
Clothing
Jaguar coat & trousers
J a gu a r
&
coat
trousers
JBS Ref No.
Fire coat: J/A
Trousers: TJ/A
Diagrams
15cm
10cm
7cm
ARASHIELD
®
Delta T
Dark Navy
Brigadier Blue
Available colours
Short coat and high rise trouser design
for ease of movement
Orange
Internal Kevlar felt reinforcement shoulder
and knee pads for added comfort
Yellow
External knee pad reinforcement
for extra abrasion resistance
NOMEX
®
Z200™
Dark Navy
One outer sleeve coat pocket
Heavy moulded zip covered with
Velcro front fastening
Two internal pockets – one jetted and one patch
Inferno
6
The Jaguar fire coat and trousers were designed
and developed to meet the needs of those
customers who required garments to be less
restrictive when working in confined spaces,
whilst maintaining maximum protection.
Pbi ®
Gold
Kermel
Dark Navy
One row of 50mm silver 3M Scotchlite™
(also shown 50mm yellow/silver/yellow 3M
Scotchlite™ reflective tape)
Fixed trouser braces, crossed at back
Fire coat meets Gore Rain Room Test
Available to order in a range of sizes: Small, Medium,
Large, X-Large, 2X-Large, 3X-Large, 4X-Large
Can be tailored to suit any specification – see range
of technical solutions available on pages 12-15.
Note: The above specification refers to the garments in the photograph –
many other styles are available to meet specific customer requirements.
Information
These fabric colours are readily available. However, other
non-standard colours are obtainable, subject to availability.
NOMEX
Jaguar coat & trousers
Clothing
Above garment
complies with standards
EN 469
DuPont Nomex ‘Omega’ Quality Programme*
®
W.L.Gore & Associates Rain Room Test
Above garment
complies with standards
‘Omega’ refers to a total garment system
* NOMEX– including
outer shell fabric, moisture barrier,
®
EN 469
W.L.Gore & Associates Rain Room Test
thermal barrier and inner liner.
7
Clothing
Marine suits
M asuits
r ine
JBS Ref No.
FS1 HP8YE
FS2 HP8YE
Diagrams
High visibility colour yellow
Sewn-in non-flammable light lining
Fleece lined high collar
Velcro fastenings
Drawcord at hem
Trouser contains internal thermal knee pads
and one patch pocket
Available in sizes: Small, Medium, Large and X-Large
Information
The Marine (or Fleet) Suit is an internationally
recognised Close Proximity Fire Fighting suit. A twopiece suit, manufactured from lightweight fire-resistant
Heatshield material, with a water-repellent and antistatic finish. In worldwide use, the suit contains the
following features:
Approved by the
following authorities
Mariner’s Wheel
UK Department of Trade Approval
Lloyd’s Register of Shipping Approval
American Bureau of Shipping Approval
China Classification Society
Bureau Veritas, Marine Departments, France
Ministère Des Transport, France
Det Norske Veritas, Norway
USSR Register of Shipping, USSR
Department of Transport, Australia
United States Coast Guard, USA
American Bureau of Shipping, USA
Swedish National Administration of
Shipping and Navigation, Sweden
Ministère Van Verkeer en Waterstaat,
The Netherlands
8
Marine suits
JBS Ref No.
Clothing
FS3 HP8YE Quilted
FS4 HP8YE Quilted
Diagrams
Information
The Marine (or Fleet) Suit is a two-piece suit
manufactured from a lightweight fire-resistant
heatshield material, with a water-repellent and antistatic finish, with a moisture barrier and thermal
barrier quilted to an inner lining of flame-retardant
cotton. This suit complies with EN 469. The suit
contains the following features:
High-visibility colour yellow
Front fastening by zip covered by a flap
fastened by velcro
High collar
Trousers are fully lined with adjustable braces
Available in sizes: Small, Medium, Large,
and X-Large
Approved by the
following authorities
Mariner’s Wheel
Complies with standards
EN 469
Approved by Mariner’s Wheel
9
Clothing
Wildland firefighting
Wfirefighting
ildla nd
Complies with standards
EN 531
Unlined coverall
One-piece unlined coverall
Yellow 3M Scotchlite™ retroreflective
Front zip fastening
Two outside patch pockets
Two slant side pockets
Available in sizes: Small, Medium, Large, X-Large
We can also supply as a two-piece garment, or
alternatively a garment containing more than one layer
Can be tailored to suit any specification – see range of
technical solutions available on pages 12-15.
Available materials:
NOMEX ® Delta T
NOMEX ® III
NOMEX ® Delta C
Pbi ®
Kermel HTA
Note: The above specification refers to the garments in the photograph –
many other styles are available to meet specific customer requirements.
10
Information
The nature of Wildland firefighting is somewhat different
to structural firefighting, therefore we have a specific
lightweight design to meet this particular need. Some
of the features are as follows:
Diagrams
MUP RH
VATROGASTVO
Fully lined coverall
Clothing
F u l l y lcoverall
ine d
Complies with standards
EN 469
JBS Ref. Unc 9 Lined Coverall
NOMEX
®
Delta T
Brigadier Blue
Two half bellow pockets with drainholes
One internal pocket
Orange
Plain waist (no elastic)
Yellow
Two way zip covered
with Velcro front fastening
Information
Dark Navy
Many customers around the world still favour
the traditional one-piece suit, and JBS
offers a practical solution to this
requirement which is durable yet
comfortable.
Diagrams
MUP RH
VATROGASTVO
One row of 50mm silver 3M reflective tape
NOMEX
®
Z200™
Dark Navy
Available colours
Inferno
Pbi ®
Available in sizes: Small, Medium, Large,
X-Large, XX-Large
Can be tailored to suit any specification –
see range of technical solutions available
on pages 12-15.
Note: The above specification refers to the suit in the
photograph – many other styles are available to meet specific
customer requirements.
Gold
Kermel
Dark Navy
11
Clothing
Fire Dress Uniform
Fire
Dress
uniform
Information
Shirt:
Brigade navy open neck fireman’s pilot shirt, 195gm polycotton, with
epaulettes, pleats & pockets with pen divider. Size S-2XL. Colours: White, Navy,
Black.
Trouser:
Brigade navy combat trouser 245gms.
Belt:
Nickel encapsulated buckle black leather belt.
Wicking Navy T-Shirt:
This poly wool t-shirt (80% polyester, 20% wool), provides comfortable insulation from hot temperatures, while wicking sweat and moisture away. Weight
170gm.
Fleece:
Navy fleece super anti pill micro fibre fleece 300gm.
3 in 1 Jacket:
Navy outer 3 in 1 jacket and fleece (380gm) EN 343 class3:2. Jacket has 4
outer pockets and 1 map pocket, with high neck and storm flap.
Soft Shell Jacket:
The abrasion resistant outer is bonded to a micro/breathable membrane that
blocks wind and water but allow moisture molecules to pass freely to the
outside, keeping the wearer dry on the inside. The inner fleece regulates core
body temperatures by wicking moisture and providing insulation.
Specifications: 325gms, 3 layer waterproof 10000mm Bonded Fleece
Outer Layer: 93% polyester/7% Elastane. Size XS – 3XL Colours: Black, Navy.
60 degree wash
Navy 3 in 1 Jacket
12
Fire Stationwear
Clothing
Fire
stationwear
Navy Soft Shell
Jacket
Navy Fleece
Jacket
13
Clothing
Industrial
Teramo T-Shirt
Ref: 2690
Ref: 2689
T-Shirt with long sleeves, ribbed wrists for extra comfort,
Composition: 60 % modacryl, 40 % viscose FR,
Weight : 170-180 g/m2
FR Long Johns with front fly, ribbed ankles for extra comfort,
Composition: 60% modacryl, 40% viscose FR,
Weight: 170-180gr/m2
Ruapo Polo Shirt
Desado Fleece
Ref: 3142
High visibility anti-flame anti-static long sleeved polo shirt:
Double cloth, 18% acryl, 19% viscose, 63% modacryl
Weight : 215 g/m2. Reflective FR striping.
Compies to EN471 class 3, EN 531 class A, B1, C1, EN1149-3
14
Trieste Long Johns
Ref: 7796
Flame retardant AST fleece can be worn separately,
Elasticated sleeves, antistatic, fire retardant
Industrial
Bravone Bodywarmer
Ref: 1666
Ekofisk Trousers
Clothing
Ref: 5806
Detachable SIOPOR FR AST bodywarmer – can be worn separately,
Double sided quilted FR cotton lining, inside pocket, fire retardant,
EN 471
Siopor FR AST trousers with fixed flame retardant cotton lining,
elasticated waist with drawstring, taped seams, fixed Pyrovatex lining, fire retardant, antistatic, chemical resistant,
EN 343 32
Winseler Jacket
Hanson Jacket
Ref: 3073
Siopor FR AST jacket with fixed flame retardant cotton lining,
foldaway hood in collar, mobile pocket, taped seams, fire
retardant, antistatic, chemical resistant, EN 471, EN 343 33
Ref: 3085
Double closure with zip and snap
Detachable lining up in the hood
2 patch pockets and 1 inside pocket
15
Tools & Accessories
Helmets
Traditional helmet
 Traditional shaped helmet.
 Manufactured from glass fibre polyester material with colour pigment impregnated.
 Multi-sized helmet, adjustable by ratchet system.
 Manufactured to EN 443.
 Compatible with breathing apparatus mask.
 Available in colours: Yellow and White. Extras available.
 Polycarbonate visor available 2mm thick to
 EN 166 (Ref No. Gen 34).
 Black neck curtain available (Ref No. Gen 36).
 Bubble shaped visor available in 2mm thick to EN 166 (Ref. No.
Gen 35).
 Helmet shown has these additions.
JBS Ref No. Helmet 1
Firefighters’ helmet





Glass fibre helmet.
Manufactured to EN 397.
Adjustable headband and chinstrap.
Visor manufactured to EN 166.
Supplied with Heatshield neck curtain.
JBS Ref No. Helmet 2
Firefighters’ helmet





Glass fibre helmet.
Manufactured to EN 397.
Adjustable headband and chinstrap.
Visor manufactured to EN 166.
Supplied with aluminised neck curtain.
JBS Ref No. Helmet 3
16
Helmets
Tools & Accessories
Close proximity helmet








Multi-layered flame-retardant shell.
Epoxy coated aluminium finish.
Hinged polycarbonate visor with brass mesh.
Supplied with aluminised neck cape.
Adjustable head harness.
Quick release chinstrap.
In use with Civil and Military Aviation
Authorities, Oil and Shipping Companies worldwide.
JBS Ref No. Helmet 4
JBS Ref No. Helmet 6 (Close proximity helmet for breathing
apparatus) Helmet designed to be worn
with breathing apparatus.
Firefighters’ helmet
 The Cromwell F600 fire-fighters helmet and faceshield
combination has a unique modular design which adapts
easily and quickly to changing operational needs.
 The first to have dual CE certification for both the helmet and
faceshield, the helmet is approved to CE EN 443, the visor to CE
EN 166.
 The F600 fire helmet provides improved protection, higher
comfort levels and a lower cost of ownership with easily replaced
components to extend service life.
 The Cromwell Signum range of communications headsets fits
easily inside the helmet and is compatible with most radio types.
JBS Ref No. PHH115HD - White
PHH103HD - Yellow
Wildfire Helmet 911
Bullard Wildfire helmets are specifically engineered to meet the special needs of
wildland/forestry fire-fighters. Manufactured from heat-resistant thermoplastic for
superior impact and penetration protection, Wildfire helmets meet and exceed the
performance specifications of NFPA 1977-2005. These helmets also exceed all major
state fire codes for wildland fire fighting.
Features:
 Easy to adjust Flex-Gear® ratchet sizing suspension
 Thermoplastic shell
 Available in cap style or full brim hat style
 Reflective lime-yellow stripes
 Three goggle clips, Adjustable chinstrap
 Comfortable 6-point suspension
 Leather ratchet cover (on ratchet models)
 Absorbent cotton brow pad
 Velcro attachments inside shell
 Meets NFPA 1977-2005 specifications
 Nomex Neck curtain for ear & neck protection available
17
Tools & Accessories
Helmets
F2 X-Trem Helmet
General Specifications:
The F2 X-TREM includes state-of-the art features to provide unparalleled security and comfort to the wearer:
 High resistance, high temperature Polycarbonate shell with polyurethane paint, to provide optimal shock
and penetration performance.
 Quick adjustment Ratchet System, for easy setting of head size while the helmet is on the head, even with a gloved hand.
 Retention system with 3 point high comfort chinstrap including chincup, and several adjustment points for optimized stability whatever head size and
morphology of the wearer.
 Attachment points for additionnal equipment used in various types of operations : ear protection (passive or active with Cut-off system, EN352-3
compliance), face protection (mesh visor or polycarbonate clear screen), high performance lamp (Xenon or LED), full face mask.
 Retroreflective stickers (optional) to increase visibility in tough conditions, with the possibility to fully customize the helmet thanks to printed stickers.
 High performance goggles (optional) for specific eye protection against fumes, dust and high speed particles (EN166 compliance).
NEW!
Magma
Fire Helmet
Specification:











18
The lowest weight and the most superior comfort in its class.
Fully compliant with EN443:2008
Available in half, three-quarters and full size helmet.
Magma offers a huge range of colours and color combinations as well as various options for ranking by colours, logos and text on the front frame or
on the reflective stripes.
The layout of the platform, outer shell and visor encloses the inner compartment hermetically against all risks. No comparable helmet offers a similar
protection against heat, flames, sparks and fluids.
The Magma head ring is made from just three components. Clearly laid out and easy to operate. The front and rear height of the head ring can be
adjusted separately, just like the wearing height. These functions ensure sufficient space for a perfect fit of the protective goggles and the mask.
The strap system is equipped with a new safety buckle, which is arranged laterally for utmost wearing comfort and easy handling. The x-shaped
design of the neck straps fit comfortably, adjusts itself automatically and obtains best results in pull-off tests.
The three-dimensional visor covers the retracted front frame for a maximum upper and lateral field of view, while also covering the complete face up
to the chin, leaving enough space for spectacles, protective goggles and even a respirator mask or stethoscope.
The helmet is compatible with all conventional respirator masks – whether with rubber straps or adjustable two-point mask connection.
Radio with bone or swan microphones are located where it should and can be mounted in no time and without using tools to the designated
attachment points.
Made from Nomex with an inner liner and dovetail tuck or as “Dutch Ear Neck Protector” according to HuPF with elastic planes around the face.
Life Support Apparatus
Tools & Accessories
ELSA - Emergency Life
Support System
Renowned as the world’s leading Constant flow escape
set, the ELSA (Emergency Life Support Apparatus) from
Scott Health & Safety is designed for rapid escape from
hazardous industrial and marine environments.
Now in its third generation, Emergency Life Support
Breathing Apparatus is a concept originally pioneered
by Scott Health & Safety under its Sabre Breathing
Apparatus brand and the original design principles
continue to this day.
The current design is simple and quick to operate,
reliable and robust in use and performs to the latest
European Standard EN1146.
Features:
ELSA features
10 or 15 minute versions
Standard Hi Vis or black anti-static bag
Automatic quick fire activation
Unique cubic hood design
CE marked in accordance with EN1146
Shipswheel approved
Corrosion resistant Nickel plated components
Standard breathing air charging adaptor
10 year service interval
THE ELSA HOOD
The uniquely designed hood is fabricated from PVC
coated materials with an ozone resistant neckseal. The
three sided flat visor allows the hood to be flat packed
avoiding creases to the visor and allowing rapid
removal from the bag. The large visor area provides
excellent peripherial vision with the hood offering a
feeling of unrestricted comfort. An inner mask prevents
misting and minimizes Carbon Dioxide dead space.
19
Tools & Accessories
Fire Hoods
PAC II Fire Hood
PAC II hood available in P-84, Nomex, Nomex Blend, P.B.I.,
P.B.I. Gold, and CarbonKnight fire retardant materials.
DESIGN – TWO PIECE with NOTCHED SHOULDER
HEAD DESIGN
LAYERS: 2 ply *
LENGTH: From top of head to neck: 13 inches
WIDTH: Back seam to top of face: 9 inches
Back seam to bottom of head: 11inches
SIZING: One size fits all. Do not modify, change, or alter your
protective hood in any manner.
* LAYERS Hood constructed of P.B.I. Gold has outer layer of
P.B.I. Gold and inner layer of P.B.I.
BIB DESIGN
LAYERS: 2 ply *
LENGTH: 8 inches (front and back)
NOTCHED SHOULDER DESIGN:
From top of head to bottom of notched shoulder:
~15 inches
* LAYERS Bib constructed of P.B.I. Gold has outer layer of P.B.I.
Gold and inner layer of P.B.I.
OVERALL HOOD LENGTH:
From top of head to bottom of apron: 21 inches
CONSTRUCTION
All seams are merrow stitched then top and bottom
covered with a 5-thread cover stitch for extended
durability. All bottom edges are bound with binding.
THREAD: 100% Nomex
SEAMS:
JBS Ref No. PHD03FR
PAC III Fire Hood
DESIGN – TWO PIECE with NOTCHED SHOULDER and SHOULDER
INSERT (for added shoulder protection)
HEAD DESIGN
LAYERS: 2 ply *
LENGTH: From top of head to neck: 13 inches
WIDTH: Back seam to top of face: 9 inches
Back seam to bottom of head: 11 inches
BID DESIGN
LAYERS: 2 ply
LENGTH: 8 inches (front and back)
NOTCHED SHOULDER DESIGN WITH INSERT:
From top of head to bottom of notched shoulder:
15 inches
INSERT: Bib with insert for added shoulder protection
* LAYERS Hood constructed of P.B.I. Gold has outer layer of
P.B.I. Gold and inner layer of P.B.I.
OVERALL HOOD LENGTH:
From top of head to bottom of apron: 21 inches
SIZING:
One size fits all. Do not modify, change, or alter your
protective hood in any manner.
CONSTRUCTION
All seams are merrow stitched then top and bottom
covered with a 5-thread cover stitch for extended
durability. All bottom edges are bound with binding.
THREAD: 100% Nomex
SEAMS:
JBS Ref No. PHD04FR
20
Gloves
Firefighters’ glove
Tools & Accessories
Gauntlet style firefighters’ glove
 Manufactured to
EN659:2003 Protective
Gloves for Structural Fire
Fighting
 PYROHIDE® leather shell
 Gore™ Crosstech® membrane
 Slash resistant blended
KEVLAR® seamless knitted
lining
 3 layer construction to enhance thermal protective
properties
 Chemical bond securing
lining to membrane to
prevent lining inversion
 Sizes : XXS, XS, S, M, L, XL,
XXL, XXXL. + Bespoke
 Manufactured from aluminised material.
 Five fingered gauntlet
style glove.
 Length 36 cms.
 Leather palm.
 Universal size.
JBS Ref No. PFR10GL
JBS Ref No. Glove 2
Aluminised backed firefighting glove
Rubber glove
 Manufactured from aluminised material.
 Five fingered glove.
 Kevlar knitted wrist.
 Leather palm.
 Universal size.
 Electrician’s rubber glove.
 For use on board ships
when firefighting if electrical work is to be undertaken, in accordance with
SOLAS.
 Glove tested to 5000 volts
(650 volts working).
 Universal size.
JBS Ref No. Glove 3
JBS Ref No. Glove 4
Firefighters’ leather glove
 Leather glove, colour: Blue.
 Reinforced at palm and
thumb with leather of
same material as glove
outer.
 Glove lined with GORE-TEX
® membrane.
 Fully lined with Kevlar.
 Kevlar wristlet.
 Manufactured to EN 659.
 Sizes available: Small,
Medium, Large, X-Large.
 Also available in colour
Black
 Also available in black with
waterproof finish to
leather (without GORE-TEX
® membrane) without
reinforced palm.
JBS Ref No. Glove 10
Marine firefighting gauntlet
 Manufactured from Heatshield.
 Thumb and mitten style.
 Elasticated wrist.
 Also available as
thumb/forefinger and
mitten (Ref No. UNM8
HP8YE).
 Universal size.
JBS Ref No. UNM7 HP8YE
21
Tools & Accessories
Boots
Swift Water Rescue Boot
The Specification
 Upper Material: Grey suede with textile panels with high
drainage weave.
 Lining: Fast moisture wicking textile lining.
 Sole: Combination PU sports contour, high grip two colour
non-marking sole.
 3/4 length dual density PU footbed for instant comfort.
 Swift water rescue elasticated lace and toggle system.
 Highly flexible and lightweight construction.
 True athletic fit with sports shoe comfort.
 Steel toe cap to protect the toe from impact
 Steel midsole to protect from penetration underfoot.
 Oil, acid and slip resistant outsole. Heat resistant to 160°C.
 EN ISO 20345 S1P
 Available in sizes 6 - 13
FB300GTX Firefighter Boot
The Specification
 Pull on Specialist Firefighter Boot
 Upper material: Black full grain leather
 Lining: Fully waterproof Gore-tex lining
 Sole: Dual Density Rubber (DDR) outsole and midsole for long
life and lightweight.
 2 pull on handles for easy donning.
 External ridged rubber bump cap for long wear life.
 Impact resistant steel toe cap to 200 joules.
 Stainless steel midsole for penetration resistance to 1100 newtons.
 Heat resistant to 300 degrees C
 NOMEX ® fire retardant threads throughout.
 Ankle protection on both medial and lateral sides of the foot.
 Shock and Energy absorbing heel zone.
 Oil, heat, slip, acid resistant and antistatic outsole.
 EN ISO 15090
 Available in sizes 5 - 13
FF210 - Zip Up Firefighter Boot
The Specification
 Upper material: Black full grain leather
 Lining: Fully waterproof Gore-tex lining
 Sole: Dual Density Rubber (DDR) outsole and midsole for long
life and lightweight.
 Zip up lace up combination for quick donning and tight fit
 External ridged rubber bump cap for long wear life.
 Impact resistant steel toe cap to 200 joules.
 Stainless steel midsole for penetration resistance to 1100 newtons.
 Heat resistant to 300 degrees C
 NOMEX ® fire retardant threads throughout.
 Ankle protection on both medial and lateral sides of the foot.
 Reflective Hi Viz profile to lateral sides.
 Shock and Energy absorbing heel zone.
 Oil, heat, slip, acid resistant and antistatic outsole.
 EN 15090
22
Boots
Tools & Accessories
Jolly Fire Boot 9005/GA
The Specification
 Upper: Full-grain leather with water-repellant
treatment, rubber toe cap, rear gusset, Kevlar 3 row stitching, innovative elastic system for perfect fit, rear pull-on.
 Lining: Gore-Tex® Footwear.
 Mid-Sole: Innovative laminate high performance composite antipenetration mid-sole.
 Sole: Anti-static nitrile rubber, double density, resistant to fire,
oils/hydrocarbons and heat, non-slip, debris free sole, wear-resistant, shock-absorbing heel.
 Armour: Ankle protection.
 Toe Cap: Aluminium alloy resistant to 200 joules.
 Certifications: EN ISO90:2006, H13, CI, AN-F2A-P.P.E. 3a CAT
 Sizes EU: 36-49
JBS Ref No. ST334
Jolly Fire Boot 9052
The Specification
 EN345/2 S3 HRO HI CI WR - FPA - P.P.E. 3a CAT.
 Full grain leather upper with water repellent
treatment, rubber toecap - rear gusset.
 Kevlar 3 row stitching, ankle protection.
 Gore-Tex® footwear lining.
 Innovative laminate textile.
 Anti-perforation midsole. Anti-static nitrile rubber sole, resistant
to fire, oils, hydrcarbons and heat, non-slip, debris free sole, wear
resistant, shockabsorbing heel.
 Toe cap: Aluminium resistant greater than 200 joules.
 Closure: New Jolly rapid-off system with total
opening zipper
 Sizes: 36-49
JBS Ref No. ST340
Firefighter 4000
The Specification
 Approved EN345 Part 2
 Type SB/FP (Firefighting)
 Home Office A29 Specification
 200 Joule Steel toe cap
 Stainless steel midsole
 Dual density Flame / Heat / Oil resistant sole
 Latex dipped construction
 Heel energy absorber
 Size:UK 3-13
23
Tools & Accessories
Torches
Rechargeable safety handlamp & charger
Rechargeable handlamp (Gen 57)
Charger (Gen 15)
 Automatic standby power fail switch-on
 Deep discharge battery protection
 Operating time 4/5 hours
 Manufactured to EN 50014, EN 50019, EN 5020
 Lloyds’ Register of Shipping approved
JBS Ref No. Gen 57 & 15
Safety torch
 Two-cell safety torch for use in hazardous industrial atmospheres,
shipping and offshore environments.
 Intrinsically safe.
 BASEEFA approved.
 Supplied without batteries.
JBS Ref No. Gen 30
Right angled safety torch
 Two-cell safety torch for use in hazardous industrial atmospheres,
shipping and offshore environments.
 Intrinsically safe.
 BASEEFA approved.
 Supplied without batteries.
JBS Ref No. Gen 16
24
Light Tower
Other Items
Inflatable Light Tower
Examples of applications and effectiveness:
 Any location where a lack of external
power or light is required / command
and control / search & rescue / archaeological & geological research / sport
The Inflatable Light compromises of a
and recreation / event & exhibition
synthetic fabric rip stop air-inflated cylinder,
services / exercise & training scenarios /
which raises the light source up to 4.5 mearmed forces / construction sites / airters (15 feet) high and the metal halide
ports / road works ....
1000w / 95000lm lamp provides excellent ilThe applications are almost limitless –
lumination over an approximate 10000sqm
where and when you require a highly
area.
transportable and easy to operate light
source.
Available in two variants, the PIL is the
larger more powerful unit, the Nite Lite is
 At 35 feet – Perform basic first aid /
lighter, smaller and therefore requires less
triage, prepare serve food.
storage space. Both units can be easily
 At 75 feet – Identify and operate tools,
transported in the boot of any car.
assemble shelters etc.
The system is secured by a system of guy
 At 200 feet – Read documents.
ropes and / or ballast bags which will allow  At 300 – 1000 feet – Avoid trip hazards,
for operation in winds up to 20 miles per
locate casualties.
hour.
The JBS Light Tower is a highly versatile,
easy to use and can be deployed and
operated by one person achieving full
illumination in less than 5 minutes.
All components are easily replaced by the
Available with or without an on board
end user.
generator unit or powered by an external
source, the unit may be run by a 110v / 60hz
or 240v / 50hz power source.
25
Other Items
26
Body Bags
Decontamination Tents
Other Items
Collective Decontamination
The decontamination chain is designed for walking/ disabled victims during a biological,
chemical or nuclear incident. This chain is made of 2 areas of 45 sqm or 72 sqm with the
supply in of hot water, pumps, shower units, reception, undressing /dressing areas, storage
tanks for clean and contaminated liquid and heating. With a recommended shower time of
3 to 10 minutes (depending on the risk) a flow of approximate 40 persons per hour can be
processed. The unit can be deployed in approximately 1 hour by 7 personnel.
27
Paramedic
Workwear
Soft Shell Jacket





Radio Pocket
ID Holder
Epaulettes
Waterproof Zips
Pen Pocket





Reflective Piping In Seam
Washable To 40 Degrees
Stand Collar
Side Access Comfort Zip
Sizes: S - 3XL
Ambulance Green Fleece
 Green Ambulance Fleece with Epaulettes
Ambulance Short Sleeve Shirt






28
195 Gram
Carrington Shirt Fabric
Stiffened Collar
Pen Pocket on Sleeve
2 Back Pleats
2 Front Pockets with Pen
Divider







Fly Front
Long Length Drop Tail
Washable at 85 degrees
Radio Loops
Unisex
Bottle Green, Navy or White
Sizes: XSmall - 3XLarge
V Neck T-Shirt
 Hi-Wicking Cool-Dry Fabric
Workwear
Paramedic
Epaulettes
 Sample of Ambulance Epaulettes, can be embroidered with text
or company logo.
Ambulance Male Trousers













245 Gram Carrington Fabric
2 side zip pockets with self-fabric lining
2 Cargo Pockets with Velcro Fastenings
YKK Brass Zip with Hook and Bar Fastening and Inside Button
Side elastication for comfort
Washable at 85 degrees
Two Layers of Fabric from Mid Thigh at Front
Double Stitched Seams
Reinforced back,crotch and leg seams
Stitched in crease
Sizes 28" - 56"
Hemmed to required leg Length up to 37"
Colours Bottle Green and Navy
Ambulance Female Trousers













245 Gram Carrington Fabric
Ladies Boot Cut
2 side zip pockets with self-fabric lining
2 Cargo Pockets with Velcro Fastenings
YKK Brass Zip with Hook and Bar Fastening and Inside Button
Side elastication for comfort
Washable at 85 degrees
Two Layers of Fabric from Mid Thigh at Front
Double Stitched Seams
Reinforced back,crotch and leg seams
Sizes 8 - 20"
Hemmed to required leg Length up to 37"
Colours Bottle Green and Navy
29
Paramedic
Workwear
Hi-Vis Soft Shell Jacket







Radio Pocket
ID Holder
Epaulettes
Waterproof Zips
Pen Pocket
Reflexite Hi-Vis Tape
EN471 Class 3 – 2




Washable To 40 Degrees
Stand Collar
Side Access Comfort Zip
Sizes: S - 3XL
High-Vis Parka Jacket
 High Collar with Concealed
Hood
 Waterproof Fabric
 Two Layer Breathable
 Epaulettes
 Radio Loops
 Pen Pockets
Hi-Vis Bomber Jacket
 Two Layer Breathable Fabric
 Waterproof & Washable to 60º
 Relexite GP800 and GP340
Tapes
 Epaulettes, Radio Loops and
Pen Pockets
 Mobile Phone Pocket with ID
Holder
30
 Cuff Adjusters with Velcro
 Concealed Hood
 Detachable Fleece Lining
(No Sleeves)
 Hi-Vis Yellow & Bottle Green
 Plastic Badge Holders Optional
 Optional Heatseals






Mobile Phone/Radio Pocket
Cuff Adjusters
Rear Kidney Warmer
Reflexite GP800 and GP340
Washable at 60 Degrees
Hi-Vis Yellow and Bottle
Green
Hi-Vis Waterproof Leggings





Waterproof
Glass Bead Reflective Tape
Access Openings
Elasticated Waistband
Hi-Vis Yellow and Bottle Green
Helmet
Paramedic
CROMWELL DUAL HELMET
SYSTEM
ADAPTABLE PROTECTION
FOR EVERY EMERGENCY
The new Cromwell Dual Helmet System
meets the demand for increased protection
of personnel involved in a wide range of
fire, emergency response and rescue
operations including:
 Ambulance / paramedic response
 Civil defence
 Road traffic accidents
 Urban search and rescue
 Confined space rescue
 Structural fire fighting
 Woodland fire fighting
 Water rescue
 Mountain rescue
 Police and public security
Innovative new design features two helmet shells that can be integrated into one
 ER1 Emergency Response Helmet with adjustable headband and retractable goggle suitable
for all Level 1 operations not requiring building entry fire fighting
 FR2 Structural Fire Fighting Helmet with additional heat, flame and impact protection and
fitted with retractable face shield – fits easily over the ER1 helmet in seconds
 ER1 can be fitted with ear defenders and configured for additional specialist operations
including air sea rescue, coast guard and heli-deck
 FR2 can be fitted with neck cape, integral communications and SCABA mask fixing points
 Designed to comply with the latest international standards
 High comfort and easy adjustment to fit male and female head shapes and sizes across a
wide range of ethnic groups
 Manufactured in the UK by Helmet Integrated Systems - the leading supplier of Cromwell and
Argus helmets to the UK fire and police services and the leading international supplier of
Alpha military and civil aircrew helmets
31
Chainsaw Protection
Workwear
ECO – RANGE
The ECO range has a light and breathable outer fabric (65 % polyester, 35 % cotton), and is well adapted
for the work in dry, warm conditions. Available as trousers, bib and braces and standard working jacket
with large high-vis surface for safety and visibility.
Chainsaw Protective Trousers
EN381 - 5 design A class 1 20m/s
DESCRIPTION:
 2 inset pockets
 1 back pocket with flap
 1 pocket for folding rule
 enlarged back bib for kidney protection ,
 elasticated waistband
 front fly
SIZES:
XS to 4XL
COLOUR: G75 GREEN - FC1 HV ORANGE
REF:
1XTP
Chainsaw Protective Bib & Brace
EN381 - 5 design A class 1 20m/s
DESCRIPTION:
 1 front bib
 1 back bib for extra kidney protection
 fully elasticated braces with buckels for adjusting
 2 side pockets
 1 back pocket with flap
 1 pocket for folding rule
 elasticated waistband
 front fly
 closing at right side waist with buttons
SIZES:
XS to 4XL
COLOUR: G75 GREEN - FC1 HV ORANGE
REF:
1XTG
Standard Working Jacket
DESCRIPTION:
 large high-vis surface for safety and visibility
 elongated back tail
 back ventilation with mesh liner
 adjustable sleeve narrowing by press studs
 hidden front zipper until top of collar
SIZES:
XS to 3XL
COLOUR: G75 GREEN - FC1 HV ORANGE
REF:
1XTK
32
Workwear Chainsaw Protection
EVO – RANGE
The EVO range has a robust, long lasting, breathable outer fabric (51 % polyamide, 49 % cotton), which
is water and dirt resistant and well adapted for the work in all climates. The EVO-range also has a stretchable reinforced crotch for better comfort. Available as trousers, bib and braces and standard working
jacket with large high-vis surface for safety and visibility.
Chainsaw Protective Bib & Brace
EN381 - 5 design A class 1 20m/s
DESCRIPTION:
 1 front bib
 1 back bib for extra kidney protection
 fully elasticated braces with buckels for adjusting
 2 side pockets
 1 back pocket with flap
 1 pocket for folding rule
 stretchable crotch
 elasticated waistband ,
 front fly
 closing at right side waist with buttons
SIZES:
XS to 4XL
COLOUR: G60 GREEN - FC1 HV ORANGE
REF:
1XIG
Chainsaw Protective Trousers
EN381 - 5 design A class 1 20m/s
DESCRIPTION:
 2 inset pockets
 1 back pocket with flap
 1 pocket for folding rule
 enlarged back bib for kidney protection
 stretchable crotch
 elasticated waistband
 front fl
SIZES:
XS to 4XL
COLOUR: G60 GREEN - FC1 HV ORANGE
REF:
1XIP
Unlined Jacket Without Protection
DESCRIPTION:
 large high-vis surface for safety and visibility
 elongated back tail
 back ventilation with mesh liner
 adjustable sleeve narrowing by press studs
 hidden front zipper until top of collar
SIZES:
XS to 4XL
COLOUR: G60 GREEN - FC1 HV ORANGE
REF:
1XIK
33
Chainsaw Protection
Workwear & Boots
Flex Range
The FLEX range has a strong and stretchable outer fabric (93 % polyamide, 7 % elasthane) for extreme
comfort, reinforcements for better durability that are convex-shaped for even better comfort. The range
is well adapted for work both on the ground and for treecare. Available as trousers and standard working jacket with large high-vis surface for safety and visibility.
Chainsaw Protective Trousers
EN381 - 5 design A classe 1 20m/s
DESCRIPTION:
 reinforcement on the frontside from above the knee to the
bottom seam and on the backside
 14 cm high from bottom seam
 convex-shaped knees
 2 side pockets
 1 back pocket with flap
 1 pocket for folding rule
 enlarged back bib for kidney protection
 elasticated waistband
 front fly
SIZES:
XS to 3XL
COLOUR: R18 RED - FY1 HV Yellow
REF:
1XSP
Unlined Jacket Without Protection
DESCRIPTION:
 large high-vis surface for safety and visibility
 elongated back tail
 back ventilation with mesh liner
 adjustable sleeve narrowing by press studs
 hidden front zipper until top of collar
SIZES:
XS to 3XL
COLOUR: R18 RED - FY1 HV Yellow
REF:
1XSK
Forestry Boots with
Chainsaw Protection
EN17249:2004 - Class 3: 28m/s
DESCRIPTION:
 Steel Toecap
 Outer sole: Flat/randed
 Base rubber compound: 1.7mm, natural rubber
 Lining Material: Glued coarse cotton
 Footbed: Coarse cotton on rubb
SIZES:
EU 39 - 47
COLOUR: 901 green / yellow
REF:
3XB1
34