factory 4.1 rct powercore 4 hex the q series exhaust

wat
erc
raf
t
ATV
OFFROA
D
STREET
SNO
WMO
BILE
OCTO
BER
2013
FACTORY 4.1 RCT
SYSTEMS AND SLIP-ON MUFFLERS
•Complete systems and slip-on mufflers
•RCT (Resonance Chamber Technology) features a patented core shape
that lowers decibels while maintaining maximum power output
•Internal ducts in the chambers of the RCT system increase internal volume for
improved exhaust flow, resulting in power gains throughout the entire range of power
•FMF’s Factory Forward Engineering centralizes mass and is less prone to crash damage
•Innovative rear end cap features simple installation of tuning tip inserts or spark arrestor
with the removal of four screws
•Compatible with stock header or FMF header
•Meets AMA and FIM sound requirements
•QuietCore 94 dB insert included
•Spark arrestor included in muffler
•Systems feature titanium PowerBomb header and midpipe, except where noted
•Available in natural titanium or blue anodized finish with titanium or carbon fiber end caps
•New systems include Bazzaz Z-Fi Fuel Control unit which precisely controls fuel delivery and exhaust flow; mount using stock connections and installation points
•Made in the U.S.A.
POWERCORE 4 HEX
•Overall increase in power and torque
•Durable stainless steel and aluminum construction
•Space Age internal packing material for maximum longevity
•Internal shape of core uses Hi-Flo technology
•Enhanced sonic evacuation provides for higher flow and
increased power
•Includes removable spark arrestor
THE Q SERIES
SLIP-ON MUFFLERS
•The Q series features advanced engineering to precisely locate baffles and chambers to
absorb sound
•Less mass to enhance power-to-weight ratio
•Quiet power with minimal sacrifice for performance
Q4 HEX
•Less sound equals more ground
•Meets USFS and FIM World Enduro sound regulations
•Power gains throughout the entire rpm range
•Spark arrestor included
•Pounds lighter than stock
•Rugged design for off-road endurance
•Made in the U.S.A.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE.
EXHAUST SYSTEMS AND SLIP-ON MUFFLERS
FOR YAMAHA YZ450F 14
DESCRIPTION
Factory 4.1 system RCT anodized titanium w/ carbon fiber end cap,
titanium MegaBomb header/​headpipe
Factory 4.1 system RCT aluminum w/ carbon fiber end cap, stainless steel
MegaBomb header/​headpipe
Factory 4.1 slip‑on muffler RCT, stainless steel w /​carbon fiber end cap
PART #
SUG.
RETAIL
1820‑1479 $1,049.95
1820‑1480
1821‑1535
799.95
449.95
DESCRIPTION
Factory 4.1 slip‑on muffler RCT, titanium
Factory 4.1 slip‑on muffler RCT, anodized titanium w/ carbon fiber end cap
PowerCore 4 Hex slip‑on muffler
Q4 Hex spark arrestor muffler
PART #
1821‑1536
1821‑1537
1821‑1534
1821‑1538
The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless
certified by CARB, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information.
SUG.
RETAIL
$599.95
599.95
299.95
359.95
MEGABOMB STAINLESS STEEL AND TITANIUM HEADERS
FOR YAMAHA YZ450F 14
•The ultimate power booster
•Improved bottom to mid-range power
•Produce the low end of a longer header and the top end of a short header
•Less susceptible to damage than a long header
•Effectively reduces sound output by as much as 1.5 dB
•Run well with sound-restricting mufflers
•Available in stainless steel or FMF’s exclusive Ti-Metal construction
DESCRIPTION
Titanium header
PART #
1822‑0409
SUG. RETAIL
$449.95
DESCRIPTION
Stainless steel header
PART #
1822‑0408
SUG. RETAIL
$349.95
The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless
certified by CARB, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information.
DAYTRIPPER™ SEAT
•Mustang’s advanced comfort
technology has been incorporated into
this custom seat
•Detailed stitch work in the highly durable,
synthetic glove-leather cover makes the
DayTripper™ a real
show winner
SUG. RETAIL�������������������
•Made in the U.S.A.
FITS MODEL
VICTORY
Cross Country 11‑13
Cross Roads 10‑11
Hard‑Ball 12‑13
$359.95
FRONT WIDTH
REAR WIDTH
PART #
11.5”
11.5”
11.5”
10”
10”
10”
0810‑1420
0810‑1420
0810‑1420
0810-1419
0810-1421
VICTORY WIDE TOURING SEATS
FOR VICTORY CROSS COUNTRY 10-13, CROSS ROADS 10-11, HARD-BALL 12-13
•Durable synthetic glove leather
•Sits rider 1/4” lower than stock
•Backrest model features a driver backrest and receiver for an optional passenger backrest
•Backrests are fully adjustable and easily interchanged from rider to passenger
•Seat dimensions: 15.5” front width, 12” back width
•Made in the U.S.A.
DESCRIPTION
VICTORY
Wide touring w/o backrest receivers
Wide touring w/ driver backrest/passenger receiver
Interchangeable backrest
Backrest pad
2
PART #
0810-1419
0810-1421
0822-0198
1501-0421
0822-0198
1501-0421
SUG. RETAIL
$489.95
689.95
210.95
169.95
BANZAI
HANK JACKET
•80% cotton, 20% polyester
•Full zip fleece
•Sherpa lining in body
and hood
•Taffeta lined sleeves
•Front chest twill logo appliqué
with satin stitch embroidery
•Custom logo trims
•Gas station style jacket
•Taffeta lining
•Patch pocket on sleeve
•Lower body welt pocket
•Chest pocket with flaps
•Woven label
•FMF logo embroidery on
front chest
and on bottom back hem
SUG. RETAIL�������������������������������������������������������������������������� $89.95
SIZE
Small
Medium
HANK, BLACK
3001-0398
3001-0399
SIZE
Large
X-large
HANK, BLACK
3001-0400
3001-0401
SUG. RETAIL���������$73.95
SIZE
Small
Medium
Large
BANZAI
3050-1943
3050-1944
3050-1945
SIZE
X-large
XX-large
BANZAI
3050-1946
3050-1947
A
Back view
B
CHOSEN FLANNEL
SCORPION HOODY
•80% cotton, 20% polyester
•Standard full zip hooded fleece
•Contrast hood and sleeves
•Center front screenprint logo
and custom logo trims
SIZE
Small
Medium
Large
SCORPION, BLACK
3050-1953
3050-1954
3050-1955
Back view
SUG. RETAIL����������������� $51.95
SIZE
X-large
XX-large
SCORPION, BLACK
3050-1956
3050-1957
•Yarn-dye heavyweight flannel
•Dual front pockets
•Tonal chinstitch embroidered logo on
the left chest pocket
•Logo embroidery at front placket and
back collarstand
SUG. RETAIL������������������������������������ $53.95
SIZE
Medium
Large
(A) BLACK
3040‑1709
3040‑1710
(B) NAVY
3040‑1713
3040‑1714
SIZE
X‑large
XX‑large
(A) BLACK
3040‑1711
3040‑1712
(B) NAVY
3040‑1715
3040‑1716
3
A
B
HOODED JACKET
•Taffeta lined flannel jacket
•Chainstitch logo embroidery on left chest pocket
SIZE
Medium
(A) BLACK
3001‑0458
(B) DARK RED
3001‑0462
SIZE
Large
Back view
SUG. RETAIL���������������������������������� $69.95
(A) BLACK
3001‑0459
(B) DARK RED
3001‑0463
SIZE
X‑large
B
A
SIZE
Small
Medium
Large
X‑large
XX‑large
SIZE
XX‑large
(A) BLACK
3001‑0461
(B) DARK RED
3001‑0465
D
CLASSIC HOODY
•80% cotton, 20% polyester
•Standard full zip fleece
•Center front screenprint and logo trims
(A) TRIED AND TRUE, BLACK
3050‑1963
3050‑1964
3050‑1965
3050‑1966
3050‑1967
A
(B) DARK RED
3001‑0464
C
TRIED AND TRUE HOODY
•80% cotton, 20% polyester
•Standard pullover fleece
•Center front screenprint
•Dual sleeve screenprints and custom logo trims
(A) BLACK
3001‑0460
SUG. RETAIL������������������������������������ $49.95
(B) TRIED AND TRUE, RED
3050‑1968
3050‑1969
3050‑1970
3050‑1971
3050‑1972
(C) CLASSIC, BLACK
3050‑1973
3050‑1974
3050‑1975
3050‑1976
3050‑1977
(D) CLASSIC, HEATHER GRAY
3050‑1978
3050‑1979
3050‑1980
3050‑1981
3050‑1982
B
C
JUMPED IN
BEANIES
D
E
F
JUMPED
•100% acrylic with visor
ALL DAY
•100% acrylic
•100% acrylic
SUG. RETAIL������������������������������������ $23.95
SUG. RETAIL���������������������������������������������������������������������������������������������������������������� $19.95
(A) JUMPED IN, BLACK
2501‑1851
(c) JUMPED, BLACK
2501‑1849
4
(b) JUMPED IN, RED
2501‑1852
(d) JUMPED, ROYAL BLUE
2501‑1850
(e) ALL DAY, BLACK
2501‑1570
(f) ALL DAY, GRAY
2501‑1571
IONGEAR™
BATTERY
POWERED
HEATED VESTS
IONGEAR™ BATTERY POWERED HEATED GLOVES
•High collar, handy zippered front pockets, tie string at bottom
and zipper closure
•Wind and rain repellent softshell barrier fleece
•Include removable heating elements, Li-Ion battery, controller and charger
•Converter kit for direct attachment to
12V battery also available (PART #2130-0120) SUG. RETAIL�������
$179.95
SIZE
X-small
Small
Medium
Large
BLACK
2830-0258
2830-0259
2830-0260
2830-0261
SIZE
X-large
XX-large
XXX-large
BLACK
2830-0262
2830-0263
2830-0264
•Heating elements built into glove
•Elements extend along entire finger and back of hand
•One battery per glove; each battery has multi-level temperature controller
•Includes sport gloves (pair), batteries (pair) and charger
•Available in black
SIZE
SPORT GLOVES
Small/medium
Large/X-large
PART #
SUG. RETAIL
3310-0419
3310-0420
$199.95
199.95
A
A
B
C
B
C
MUDLOC BOOT TOTES
DE CRISTO HELMET BAGS
•Made with vented material to allow the items on
the inside to dry out instead of trapping moisture
•Vented pocket on the inside can be used for any
number of accessories
•Additionally, there is a zipper pocket on the outside
which can be used for gloves, beacon, socks, etc.
•The real added benefit to this product is the
vacuum-formed mud catcher that will keep everything contained
•For many riders who bring their stuff in the hotel at night or have to put it in
the car, this will prevent the mud or dirt from getting everywhere
•The plastic can be removed and hosed off when it is needed
•Also a great way to store the gear in the off-season to keep track of everything
and allow airflow
•Tote is large enough to be used
with motocross boots
•Made in the U.S.A.
SUG. RETAIL�����������������
•Made from durable, water-resistant materials
•Incorporates a polyester-reinforced vinyl bottom to provide a waterproof
barrier and a long-lasting foundation for the helmet bag
•The inside is structured to accommodate any size helmet and includes a divider
to store gloves, goggles or additional accessories
•The center zip cover is fitted with a water-resistant zipper and pocket which
can hold small personal items
•The helmet section is constructed with stylish vented sections on both sides of
the helmet bag to allow airflow for drying purposes or for storage
•Vented sections are located on the top of the sides to prevent trapping of
moisture and to keep airflow moving up and out of bag
•Bag is padded and lined with a soft brushed poly material to protect your
helmet and a molded carry handle is located on the front for
easy transportation
•Made in the U.S.A.
SUG. RETAIL�����������������
COLOR
(A) Black/blue
COLOR
(A) Black/blue
$74.95
PART #
3513-0004
COLOR
(B) Black
PART #
3513-0006
COLOR
(C) Black/red
PART #
3513-0007
$64.95
PART #
3514-0019
COLOR
(B) Black
PART #
3514-0022
COLOR
(C) Black/red
PART #
3514-0023
5
Helmet with
shield and
chin bar
A
Helmet with standard visor, shield,
and chin bar (standard configuration)
Helmet with mx
vent chin bar and
standard visor
Helmet with
standard visor
and shield
Helmet with
standard visor
Helmet with
short visor
Helmet with shield
FX-55 7 IN 1
•Aerodynamic shell design constructed of advanced poly-alloy plastic for lightweight strength
•Helmet can be configured one of seven different ways: 1. Helmet with standard visor, shield and chin bar (standard configuration); 2. Helmet with standard visor
and shield; 3. Helmet with shield and chin bar; 4. Helmet with shield; 5. Helmet with standard visor; 6. Helmet with short visor; 7. Helmet with MX vent chin bar and
standard visor; includes all seven parts
•Clear-coat finish to protect paint and graphics
•Hypo-allergenic, antimicrobial nylon liner and cheek pads are removable and washable
•Ear cavities for speakers
•A flip-up, flush-fit, quick-release, single-turn-screw face shield; the shield itself is a curved, optically correct compound, which is scratch-resistant and protects
against UV-rays
•Smoke-tinted inner flip-down sun shield with left-side slide lever
•10 points of ventilation with chin, side, forehead, top and rear vents
SIZE
(A) PEARL WHITE
SIZE
(A) PEARL WHITE
•Retention system is quick-release
X-small
0104-1267
Large
0104-1270
with sewn-on ECE logo
Small
0104-1268
X-large
0104-1271
•Deluxe carrying bag
Medium
0104-1269
XX-large
0104-1272
SUG. RETAIL��������������
•DOT and ECE 22.05 certified
$169.95
6
FX-55 7 IN 1 (CONT)
C
B
E
D
G
F
SUG. RETAIL��������������������������������� $169.95
SIZE
X-small
Small
Medium
Large
X-large
XX-large
(B) FLAT BLACK
0104-1231
0104-1232
0104-1233
0104-1234
0104-1235
0104-1236
(C) FROST GRAY
0104-1237
0104-1238
0104-1239
0104-1240
0104-1241
0104-1242
(D) BLACK
0104-1243
0104-1244
0104-1245
0104-1246
0104-1247
0104-1248
(E) SILVER
0104-1249
0104-1250
0104-1251
0104-1252
0104-1253
0104-1254
(F) SAFETY-ORANGE
0104-1255
0104-1256
0104-1257
0104-1258
0104-1259
0104-1260
(G) HI-VIS YELLOW
0104-1261
0104-1262
0104-1263
0104-1264
0104-1265
0104-1266
7
0505-1300
0505-1299
0505-1298
0505-1302
ENGINE GUARDS
•Ride with confidence to take your bike everywhere it was designed to go, both on- and off-road
•Provide the highest level of protection to keep your bike off the ground
•Protect the engine, side panels, shrouds and expensive fuel tanks
•The KLR650 (PART #s 0505-1298 and 0505-1299) Engine Guards are made from 5/8” drawn-over-mandrel (DOM) tube
•The KLR650 (PART #s 0505-1298 and 0505-1299) Engine Guards include one set (two sides) of Engine Guards, mounting hardware
and our engine guard-highway peg combination (EG-3) – the EG-3’s 1” steel base tube adds additional support and provides
highway pegs, giving the rider many more choices in riding positions for greater comfort mile after mile
•The highway pegs provide bonus protection for the engine side cases, and they easily fold up when not in use
•The KTM950/990 Adventure (PART #0505-1301) Engine Guards include one set (two sides) engine guards and mounting hardware
•The KTM950/990 Adventure (PART #0505-1301) Engine Guards are made from 1” drawn-over-mandrel (DOM) tube and includes a
“crumple zone”, which allows bar movement on impact – also includes an energy-absorbing spacer which helps prevent frame
damage on impact
•The BMW F650/800GS Twin (PART #0505-1300) Engine Guards are made from 1” drawn-over-mandrel (DOM) tube and includes one
set (two sides) engine guards and mounting hardware
•The V-Strom (PART #0505-1302) Engine Guards are made from 1” drawn-over-mandrel (DOM) tube and includes one set (two side)
engine guards and mounting hardware
•The Triumph Tiger 800 (PART #0505-1303) Engine Guards are made from 1” drawn-over-mandrel (DOM) tube and includes a
“crumple zone” on the bottom of motor which prevents engine damage; includes one set (two sides) engine guards and
mounting hardware
•All engine guards are powder-coated black
•Each includes detailed mounting instructions
•Made in the U.S.A.
0505-1303
NOTE: KLR650E model cannot be used with factory skid plate. Use Moose Racing skid plate.
FITS MODEL
BMW
F650/700/800GS Twin 08-12
KAWASAKI
KLR650A 87-07
KLR650E 08-12
KTM
950/990 Adventure (all)
WEIGHT INSTALLED
PART #
SUG. RETAIL
12 lb.
0505-1300
$371.95
Nerf Uppers 7 lb./ EG-3 combo 4.5 lb.
Nerf Uppers 7 lb./ EG-3 combo 4.5 lb.
0505-1298
0505-1299
351.95
349.95
8.5 lb.
0505-1301
386.95
FITS MODEL
SUZUKI
DL650 04-12
DL1000 (all)
TRIUMPH
Tiger 800 (all)
WEIGHT INSTALLED
PART #
SUG. RETAIL
16 lb.
16 lb.
0505-1302
0505-1302
$377.95
377.95
10 lb.
0505-1303
445.95
0510‑0271
CENTER STANDS
0510‑0273
•Designed with a “kick” lever to ensure the ease of center stand deployment
•Hardened fasteners ensure a long operating life
•Double springs add security in the event of a spring failure
•Independent mounting plates ensure an exact fit every time
•All Center Stands are powder-coated for a long-lasting great finish
•Made in the U.S.A.
FITS MODEL
KAWASAKI
KLR650A 87‑07
KLR650E 08‑12
8
PART #
0510‑0271
0510‑0272
OCTOBER Issue
ISSUE
SUG. RETAIL
$142.95
142.95
FITS MODEL
SUZUKI
DL650 04‑12
PART #
0510‑0273
9901-1387
SUG. RETAIL
$243.95