our latest brochure In PDF format
Transcription
our latest brochure In PDF format
TECO PRODUCT CATALOGUE Joist Hangers Girder Hangers Straps Timber Connectors Brackets Nail Plates Sole Plate Channels Bead & Mesh Wallstarters & Ties Fencing Washers Bolts TECO have been manufacturing Timber Connectors and Joist Hangers for 35 years. Ron Sammons Ltd. was founded by Ron Sammons in 1979. Ron began his career as an accountant but his true passion was always engineering so he took the leap of faith, relocated his young family to Sussex and began manufacturing Timber Connectors. From day one it was very much a family business with Ron’s mum Greta running the office, Ron’s dad Ronald helping with production, Ron’s wife Doreen in charge of packing and despatch and the children earning their pocket money counting Timber Connectors in a shed at the bottom of the garden. A lot has changed since 1979. Ron Sammons Ltd. trade as TECO Building Products, a brand that is trusted for exceptional technical performance. TECO have developed a full range of Joist Hangers, Brackets and Connectors. To keep us competitive our factory operates high speed presses with sophisticated progression All copyright, trademarks and unregistered design rights for the products detailed in this catalogue are the property of Ron Sammons Ltd. We reserve the right to amend specification without prior notification as part of our continuous development programme. For a copy of our standard terms & conditions of sale and the latest information regarding TECO products please refer to our website. Special Products TECO can manufacture non-standard items to any design and size required. Products or sizes not included in this catalogue will be regarded as non-standard ‘specials’. Special products must be designed by the customer and then manufactured by TECO in accordance to customer specifications. TECO cannot and does not make any representations regarding the suitability of use or load carrying capacities of specials. Hanger Size Unless specifically requested, 50mm Joist Hangers may be supplied 47mm wide to reflect the changes in timber sizes. If 50mm is required for refurbishment work, please ensure this is clearly stated at the time of order. tools, all designed and built in house in our own bespoke toolroom facility. We employ a team of experienced engineers, managers and support staff, offering a friendly, reliable and consistent service. We have gained a loyal customer base of respected merchants and distributors. We operate ISO9001 Quality Management, ISO14001 Environmental Management and the humble Timber Connector, where it all started, is now CE marked and certified for Factory Production Control by BM TRADA. However, some things remain the same. Three generations of the Sammons family still work within the business. Ron can still be found in the toolroom or on the factory floor working on his latest innovation. Ron’s passion is still engineering and this same passion has been installed in the very heart of the company, that’s why we take great pride in the products we manufacture and the fact we remain fully committed to being a true British manufacturer. Safe Working Loads (SWL) Where appropriate, products are tested by CERAM Research Ltd Notification Body No.1289. Calculations and assessments are by C4Ci Ltd. Health & Safety Handling of materials must comply with the Manual Handling Operations Regulations. Protective gloves should be worn as there may be risk of cuts from sharp edges. Installation Products must be installed correctly to prevent risk of failure. For further details on installation please visit our website or contact TECO. Tel 01273 423 983 Email [email protected] Web www.tecoproducts.co.uk Contents Nails Builders Plastics Studding www.tecoproducts.co.uk Frame Cramps Screws Miscellaneous Joist Hangers 2 Truss Clips & Girder Hangers 11 Straps, Waterbar & Banding 13 Timber Connectors 17 Brackets & Framing Anchors 19 Nail Plates & Connector Plates 21 Sole Plates & Sole Plate Channels 22 Frame Cramps & Frame Ties 23 Bead & Mesh 24 Wallstarters & Ties 30 Fencing 33 Studding 36 Washers & Nuts 37 Nails 39 Bolts 40 Screws 43 Builders Plastics 47 Miscellaneous 48 Product Index 50 1 TECO Mini Joist Hangers MMINI & MINI Application: Timber to timber joist hangers; suitable for light duty applications such as trimmers, ceiling joists and decking. Features: • Tag on the base of the hanger helps avoid rotation and aids fast, accurate location. The tag can easily be bent if not required. MINI JOIST HANGERS • 50mm joist bearing. Code MMINI Product Dimensions (mm) Width Height Product Number of nails (30 x 3.75) Joist size (mm) Pre Galvanised Steel - 1mm Characteristic Value (kN) for Eurocode 5 Safe Working Load for BS5268 (kN) Short Medium Long Term Term Term Square Twist MMINI38 Mini Mini 38 72 38 x 75 to 100 14 8.34 4.17 3.97 3.47 MMINI44 Mini Mini 44 68 44 x 75 to 100 14 8.34 4.17 3.97 3.47 MMINI47 Mini Mini 47 67 47 x 75 to 100 14 8.34 4.17 3.97 3.47 MMINI50 Mini Mini 50 65 50 x 75 to 100 14 8.34 4.17 3.97 3.47 MINI38 Woody Mini 38 100 38 x 100 to 150 20 9.5 4.75 4.53 3.96 MINI44 Woody Mini 44 97 44 x 100 to 150 20 9.5 4.75 4.53 3.96 MINI47 Woody Mini 47 96 47 x 100 to 150 20 9.5 4.75 4.53 3.96 MINI50 Woody Mini 50 94 50 x 100 to 150 20 9.5 4.75 4.53 3.96 Stainless Steel - 1mm Annular Ring MINISS44 Woody Mini 44 97 44 x 100 up to 150 20 9.5 4.75 4.53 3.96 MINISS47 Woody Mini 47 96 47 x 100 up to 150 20 9.5 4.75 4.53 3.96 STD WNT MINI LL WNT To order or find out more call 01273 423 983 or scan the QR code. 2 www.tecoproducts.co.uk TECO Woody Timber Hangers WNT, MSL, SHORTLEG & STD Application: Timber to timber joist hangers to support floor joists and trimmers of varying depths. Features: WNT - Woody No Tag • Designed to allow easy fixing of plasterboard. • Superior design allows for the use of fewer nails for faster installation. JOIST HANGERS • Increased leg lengths, all widths can take up to a 225mm deep joist. STD - Woody Standard • Increased leg lengths, all widths can take up to a 225mm deep joist. • Available up to 150mm wide. MSL, SHORTLEG & STD • Tag on the base of the hanger to help avoid rotation and aid fast, accurate location. The tag can easily be bent if not required. Code Product Product Dimensions (mm) Joist Width Leg Bearing Joist size (mm) Pre Galvanised Steel Number of nails (30 x 3.75) STD Characteristic Value (kN) for Eurocode 5 SHORTLEG MSL Safe Working Load for BS5268 (kN) Short Medium Long Term Term Term Square Twist WNT38 Woody No Tag 38 309 60 38 x 125 to 220 23 14.41 7.21 6.86 6.0 WNT44 Woody No Tag 44 306 60 44 x 125 to 220 23 14.41 7.21 6.86 6.0 WNT47 Woody No Tag 47 305 60 47 x 125 to 220 23 14.41 7.21 6.86 6.0 WNT50 Woody No Tag 50 303 60 50 x 125 to 220 23 14.41 7.21 6.86 6.0 WNT63 Woody No Tag 63 297 60 63 x 125 to 220 23 14.41 7.21 6.86 6.0 WNT75 Woody No Tag 75 291 60 75x 125 to 220 23 14.41 7.21 6.86 6.0 WNT90 Woody No Tag 90 283 60 90 x 125 to 220 23 14.41 7.21 6.86 6.0 WNT100 Woody No Tag 100 278 60 100 x 125 to 220 23 14.41 7.21 6.86 6.0 MSL38 Mini Short Leg 38 140 50 38 x 100 to 125 22 9.5 4.75 4.53 3.96 MSL50 Mini Short Leg 50 135 50 50 x 100 to 125 22 9.5 4.75 4.53 3.96 SHORTLEG38 Short Leg 38 216 50 38 x 100 to 175 28 9.5 4.75 4.53 3.96 SHORTLEG47 Short Leg 47 210 50 47 x 100 to 175 28 9.5 4.75 4.53 3.96 SHORTLEG50 Short Leg 50 210 50 50 x 100 to 175 28 9.5 4.75 4.53 3.96 STD38 Woody Standard 38 285 50 38 x 100 to 225 32 15.44 7.72 7.35 6.43 STD44 Woody Standard 44 282 50 44 x 100 to 225 32 15.44 7.72 7.35 6.43 STD47 Woody Standard 47 277 50 47 x 100 to 225 32 15.44 7.72 7.35 6.43 STD50 Woody Standard 50 275 50 50 x 100 to 225 32 15.44 7.72 7.35 6.43 STD63 Woody Standard 63 300 50 63 x 100 to 225 32 15.44 7.72 7.35 6.43 STD76 Woody Standard 76 300 50 76 x 100 to 225 32 15.44 7.72 7.35 6.43 STD90 Woody Standard 90 300 50 90 x 100 to 225 32 15.44 7.72 7.35 6.43 STD100 Woody Standard 100 300 50 100 x 100 to 225 32 15.44 7.72 7.35 6.43 STD125 Woody Standard 125 300 50 125 x 100 to 225 32 15.44 7.72 7.35 6.43 STD132 Woody Standard 132 300 50 132 x 100 to 225 32 15.44 7.72 7.35 6.43 STD150 Woody Standard 150 300 50 150 x 100 to 225 32 15.44 7.72 7.35 6.43 Stainless Steel - 1mm Annular Ring STDSS38 Woody Standard 38 285 50 38 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS44 Woody Standard 44 282 50 44 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS50 Woody Standard 50 275 50 50 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS63 Woody Standard 63 300 50 63 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS76 Woody Standard 76 300 50 76 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS90 Woody Standard 90 300 50 90 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS100 Woody Standard 100 300 50 100 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS125 Woody Standard 125 300 50 125 x 100 to 225 32 15.44 7.72 7.35 6.43 STDSS150 Woody Standard 150 300 50 150 x 100 to 225 32 15.44 7.72 7.35 6.43 www.tecoproducts.co.uk 3 TECO Long Leg Joist Hangers LL & WNTLL Application: Timber to timber joist hangers; designed for use in Loft Conversions where the hanger extends below the support. Features: LL - Woody Long Leg JOIST HANGERS • The superior design does not require wide straps making them easier to install on site. • Loads below are from tests where the Long Leg is hung 100mm below the support with all available holes nailed. • Far greater load carrying capabilities than other leading brands. • 450mm and 600mm legs available. WNTLL - Woody No Tag Long Leg • Wider strap provides more surface area on the supporting timber. • Increased joist bearing. Installation: • All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails. LL600 Code Product Product Dimensions (mm) Width Leg Joist bearing Joist size (mm) Characteristic Value (kN) for Eurocode 5 LL450 Safe Working Load for BS5268 (kN) Short Medium Long Term Term Term Pre Galvanised Steel - 1.4mm LL38X450 Woody Long Leg 38 450 50 38 x 175 to 250 28.04 14.02 13.35 11.68 LL38X600 Woody Long Leg 38 600 50 38 x 210 to 300 28.04 14.02 13.35 11.68 LL44X450 Woody Long Leg 44 453 50 44 x 150 to 250 28.04 14.02 13.35 11.68 LL44X600 Woody Long Leg 44 600 50 44 x 200 to 300 28.04 14.02 13.35 11.68 LL47X450 Woody Long Leg 47 445 50 47 x 150 to 250 28.04 14.02 13.35 11.68 LL47X600 Woody Long Leg 47 600 50 47 x 200 to 300 28.04 14.02 13.35 11.68 LL50X450 Woody Long Leg 50 445 50 50 x 150 to 250 28.04 14.02 13.35 11.68 LL50X600 Woody Long Leg 50 600 50 50 x 200 to 300 28.04 14.02 13.35 11.68 LL63X450 Woody Long Leg 63 440 50 63 x 175 to 250 28.04 14.02 13.35 11.68 LL63X600 Woody Long Leg 63 600 50 63 x 220 to 300 28.04 14.02 13.35 11.68 LL76X450 Woody Long Leg 76 435 50 76 x 175 to 250 28.04 14.02 13.35 11.68 LL76X600 Woody Long Leg 76 600 50 76 x 220 to 300 28.04 14.02 13.35 11.68 LL90X450 Woody Long Leg 90 425 50 90 x 150 to 250 28.04 14.02 13.35 11.68 LL90X600 Woody Long Leg 90 600 50 90 x 200 to 300 28.04 14.02 13.35 11.68 LL100X450 Woody Long Leg 100 420 50 100 x 150 to 250 28.04 14.02 13.35 11.68 LL100X600 Woody Long Leg 100 600 50 100 x 200 to 300 28.04 14.02 13.35 11.68 LL125X450 Woody Long Leg 125 450 50 125 x 175 to 250 28.04 14.02 13.35 11.68 LL125X600 Woody Long Leg 125 600 50 125 x 220 to 300 28.04 14.02 13.35 11.68 LL132X450 Woody Long Leg 132 450 50 132 x 175 to 250 28.04 14.02 13.35 11.68 LL150X450 Woody Long Leg 150 450 50 150 x 175 to 250 28.04 14.02 13.35 11.68 LL150X600 Woody Long Leg 150 600 50 150 x 220 to 300 28.04 14.02 13.35 11.68 WNTLL44 Woody No Tag Long Leg 44 448 100 44 x 150 to 250 - - - - WNTLL47 Woody No Tag Long Leg 47 446 100 47 x 150 to 250 - - - - WNTLL50 Woody No Tag Long Leg 50 445 100 50 x 150 to 250 - - - - WNTLL90 Woody No Tag Long Leg 90 425 100 90 x 150 to 250 - - - - WNTLL100 Woody No Tag Long Leg 100 420 100 100 x 150 to 250 - - - - Stainless Steel - 1mm 4 LLSS47X450 Woody Long Leg 47 445 50 47 x 150 to 250 - - - - LLSS47X600 Woody Long Leg 47 600 50 47 x 200 to 300 - - - - LLSS100X450 Woody Long Leg 100 420 50 100 x 150 to 250 - - - - LLSS100X600 Woody Long Leg 100 600 50 100 x 200 to 300 - - - - www.tecoproducts.co.uk TECO Masonry Hangers FHM & WM Application: The FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger are designed to support timber joists built into brick or block walls with a minimum crushing strength of 3.5N/mm². They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropriate fixings. Installation: • The back plate of the hanger should lie flat against the vertical masonry support. JOIST HANGERS • Masonry flange should have a minimum of 3 courses (675mm masonry) above. • Both supporting and above masonry should be allowed to mature before any load is applied. • Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm. • Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent. • To provide lateral restraint HD Straps should be used. • The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots. FHM Single Piece Masonry Joist Hangers Features: FHM • Straight top flange. • Can easily be transformed into a hook over joist hanger using the unique FHM Lock Plates, no special tools or rivets are required. Just insert Lock Plate at 90°, rotate and tap into place. • No welds. • FHM Hangers 150mm and above are manufactured 10mm less to allow for notching and regularised timber. Code Product Product Dimensions (mm) Width Height Characteristic Value (kN) for Eurocode 6 Safe Working Load for BS5628 (kN) Pre Galvanised Steel - 2.4mm FHM47/100 FHM Single Piece Masonry Hanger 47 100 9.7 5.4 FHM47/125 FHM Single Piece Masonry Hanger 47 125 9.7 5.4 FHM47/150 FHM Single Piece Masonry Hanger 47 140 9.7 5.4 FHM47/175 FHM Single Piece Masonry Hanger 47 165 9.7 5.4 FHM47/200 FHM Single Piece Masonry Hanger 47 190 9.7 5.4 FHM47/225 FHM Single Piece Masonry Hanger 47 215 9.7 5.4 FHM50/100 FHM Single Piece Masonry Hanger 50 100 9.7 5.4 FHM50/125 FHM Single Piece Masonry Hanger 50 125 9.7 5.4 FHM50/150 FHM Single Piece Masonry Hanger 50 140 9.7 5.4 FHM50/175 FHM Single Piece Masonry Hanger 50 165 9.7 5.4 FHM50/200 FHM Single Piece Masonry Hanger 50 190 9.7 5.4 FHM50/225 FHM Single Piece Masonry Hanger 50 215 9.7 5.4 All values are derived in line with EN 845-1:2013 based on a declared value of 10.8kN Lock Plates FHMR100 FHM Lock Plate Return - - - - FHMR115 FHM Lock Plate Return - - - - FHMR140 FHM Lock Plate Return - - - FHMR150 FHM Lock Plate Return - - - FHMR215 FHM Lock Plate Return - - - FHM lock plate WM - WM Welded Masonry Joist Hangers Features: • Flexibility of design means as well as the standard sizes shown the WM can be manufactured in any size to order. • 2.4mm thick. www.tecoproducts.co.uk 5 WM Welded Masonry Joist Hangers Code Product Dimensions (mm) Width Height Characteristic Value (kN) for Eurocode 6 Safe Working Load for BS5628 (kN) Product Dimensions (mm) Width Height Code Characteristic Value (kN) for Eurocode 6 Safe Working Load for BS5628 (kN) JOIST HANGERS Pre Galvanised Steel - 2.4mm WM44X100 44 100 6.7 3.5 WM90X200 90 190 6.7 3.5 WM44X125 44 125 6.7 3.5 WM90X225 90 215 6.7 3.5 WM44X150 44 140 6.7 3.5 WM90X250 90 240 6.7 3.5 WM44X175 44 165 6.7 3.5 WM90X275 90 265 6.7 3.5 WM44X200 44 190 6.7 3.5 WM90X300 90 290 6.7 3.5 WM44X225 44 215 6.7 3.5 WM100X100 100 100 6.7 3.5 WM44X250 44 240 6.7 3.5 WM100X125 100 125 6.7 3.5 WM44X275 44 265 6.7 3.5 WM100X150 100 140 6.7 3.5 WM44X300 44 290 6.7 3.5 WM100X175 100 165 6.7 3.5 WM50X100 50 100 6.7 3.5 WM100X200 100 190 6.7 3.5 WM50X125 50 125 6.7 3.5 WM100X225 100 215 6.7 3.5 WM50X150 50 140 6.7 3.5 WM100X250 100 240 6.7 3.5 WM50X175 50 165 6.7 3.5 WM100X275 100 265 6.7 3.5 WM50X200 50 190 6.7 3.5 WM100X300 100 290 6.7 3.5 WM50X225 50 215 6.7 3.5 WM125X100 125 100 6.7 3.5 WM50X250 50 240 6.7 3.5 WM125X125 125 125 6.7 3.5 WM50X275 50 265 6.7 3.5 WM125X150 125 140 6.7 3.5 WM50X300 50 290 6.7 3.5 WM125X175 125 165 6.7 3.5 WM63X100 63 100 6.7 3.5 WM125X200 125 190 6.7 3.5 WM63X125 63 125 6.7 3.5 WM125X225 125 215 6.7 3.5 WM63X150 63 140 6.7 3.5 WM132X150 132 140 6.7 3.5 WM63X175 63 165 6.7 3.5 WM132X200 132 190 6.7 3.5 WM63X200 63 190 6.7 3.5 WM132X225 132 215 6.7 3.5 WM63X225 63 215 6.7 3.5 WM150X150 150 140 6.7 3.5 WM63X250 63 240 6.7 3.5 WM150X175 150 165 6.7 3.5 WM63X275 63 265 6.7 3.5 WM150X200 150 190 6.7 3.5 WM63X300 63 290 6.7 3.5 WM150X225 150 215 6.7 3.5 WM75X100 75 100 6.7 3.5 Stainless Steel WM75X125 75 125 6.7 3.5 WMSS50X100 50 100 6.7 3.5 WM75X150 75 140 6.7 3.5 WMSS50X125 50 125 6.7 3.5 WM75X175 75 165 6.7 3.5 WMSS50X150 50 140 6.7 3.5 WM75X200 75 190 6.7 3.5 WMSS50X175 50 165 6.7 3.5 WM75X225 75 215 6.7 3.5 WMSS50X200 50 190 6.7 3.5 WM75X250 75 240 6.7 3.5 WMSS50X225 50 215 6.7 3.5 WM75X275 75 265 6.7 3.5 WMSS100X150 100 140 6.7 3.5 WM75X300 75 290 6.7 3.5 WMSS100X175 100 165 6.7 3.5 WM90X100 90 100 6.7 3.5 WMSS100X200 100 190 6.7 3.5 WM90X125 90 125 6.7 3.5 WMSS100X225 100 215 6.7 3.5 WM90X150 90 140 6.7 3.5 WM90X175 90 165 6.7 3.5 All values are derived in line with EN 845-1:2013 based on a declared value of 7kN Code Product Product Dimensions (mm) Width Height 2.8N/mm² Safe Working Load with various types of masonry 3.5N/mm² 4.0N/mm² 7.0N/mm² Pre Galvanised - 2mm 6 BI38X100 Masonry Joist Hanger 38 100 3.08 2.67 2.84 3.13 BI38X125 Masonry Joist Hanger 38 125 3.21 2.86 3.06 3.55 BI38X150 Masonry Joist Hanger 38 140 3.28 3.05 3.19 3.80 BI38X175 Masonry Joist Hanger 38 165 3.40 3.25 3.41 4.22 BI38X200 Masonry Joist Hanger 38 190 3.52 3.44 3.64 4.63 BI38X225 Masonry Joist Hanger 38 215 3.65 3.63 3.87 5.05 www.tecoproducts.co.uk TECO Masonry Return Hangers FHMR & WR Application: The FHMR and WR Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers FHM & WM. The return adds additional lateral support by wrapping around the back of the masonry or timber. The FHMR and WR have a 25mm drop on the return flange as standard but many specials and variations can be made to order. JOIST HANGERS FHMR FHMR Masonry Return Hangers Features: • No welds. • FHM Hangers 150mm and above are manufactured 10mm less to allow for notching and regularised timber. Ordering: • FHMR are available in 47mm and 50mm wide. • When ordering please state the width, height and the width of the return. Code Product Characteristic Value (kN) for Eurocode 6 Safe Working Load for BS5628 (kN) 9.7 5.4 Pre Galvanised Steel - 2.4mm FHMR FHMR Masonry Return Hanger All values are derived in line with EN 845-1:2013 based on a declared value of 10.8kN WR WR Welded Masonry Return Hangers Features: • Flexibility of design means as well as the standard sizes the WR can be manufactured in any size to order. • 2.4mm thick. Ordering: • When ordering please state the width, height and the width of the return. Code Characteristic Value (kN) for Eurocode 6 Safe Working Load for BS5628 (kN) Welded Return Hanger 6.7 3.5 Welded Return Hanger Stainless Steel 6.7 3.5 Product Pre Galvanised Steel - 2.4mm WR Stainless Steel WRSS All values are derived in line with EN 845-1:2013 based on a declared value of 7kN To order or find out more call 01273 423 983 or scan the QR code. www.tecoproducts.co.uk 7 TECO Masonry Straddle Hangers WS Application: The WS Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers FHM & WM. The WS is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned directly opposite each other on either side of a wall or beam. Features: JOIST HANGERS • Flexibility of design means as well as the standard sizes the WS can be manufactured in any size to order. • 2.4mm thick. Ordering: • When ordering please state the width, height and the straddle width. Code WS Characteristic Value (kN) for Eurocode 6 Safe Working Load for BS5628 (kN) Welded Straddle Hanger 6.7 3.5 Welded Straddle Hanger Stainless Steel 6.7 3.5 Product Pre Galvanised Steel - 2.4mm WS Stainless Steel WSSS All values are derived in line with EN 845-1:2013 based on a declared value of 7kN TECO Face Fix Hangers MFM, MFT, HWT, HWTI & AH Application: The TECO Face Fix Range of Joist Hangers are designed for applications where additional strength is required or where access to the top of the timber or steel is not available. This range can be nailed or bolted. All values are given based on all nail holes being used, for bolting values please refer to the bolt manufacturers guidelines. The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation. AH - Angled Face Fix Hangers Features: • Angled 45° Left or Right handed. • 3mm thick. • Heavy Duty Galvanised after manufacture. • Special sizes, depths and angles available to order. Code Product Product Dimensions (mm) Width Height AHL Heavy Duty Galvanised - 3mm 8 AHL38 Angled Hanger Left Hand 38 150 AHL50 Angled Hanger Left Hand 50 150 AHL75 Angled Hanger Left Hand 75 150 AHL100 Angled Hanger Left Hand 100 150 AHR38 Angled Hanger Right Hand 38 15 AHR50 Angled Hanger Right Hand 50 150 AHR75 Angled Hanger Right Hand 75 150 AHR100 Angled Hanger Right Hand 100 150 AHR www.tecoproducts.co.uk Multi Functional Face Fix Hangers MFM & MFT MFM - 1.2mm thick MFT - 2mm thick Features: • Location tabs aid fast accurate alignment of the hanger. • M12 Bolt Holes. • 85mm Bearing. Code Product Product Dimensions (mm) Width Height Pre Galvanised Steel MFT346 Number of nails (30 x 3.75) Header Joist MFT404 Characteristic Value (kN) for Eurocode 5 JOIST HANGERS MFM MFT504 Safe Working Load for BS5268 (kN) Short Medium Long Term Term Term Square Twist MFM38 Multi Functional Mini 38 101 10 8 - - - - MFM44 Multi Functional Mini 44 98 10 8 - - - - MFM47 Multi Functional Mini 47 97 10 8 - - - - MFM50 Multi Functional Mini 50 95 10 8 - - - - MFM76 Multi Functional Mini 76 82 10 8 - - - - MFM90 Multi Functional Mini 90 75 10 8 - - - - MFM100 Multi Functional Mini 100 70 10 8 - - - - MFT38/346BA Multi Functional Hanger 38 154 12 13 12.8 6.4 6.1 5.3 MFT38/404BA Multi Functional Hanger 38 183 18 15 19.8 9.9 9.4 8.25 MFT38/504BA Multi Functional Hanger 38 233 28 21 25.1 12.55 11.95 10.45 MFT44/346BA Multi Functional Hanger 44 151 12 13 12.8 6.4 6.1 5.3 MFT44/404BA Multi Functional Hanger 44 180 18 15 19.8 9.9 9.4 8.25 MFT44/504BA Multi Functional Hanger 44 230 28 21 25.1 12.55 11.95 10.45 MFT47/346BA Multi Functional Hanger 47 150 12 13 12.8 6.4 6.1 5.3 MFT47/404BA Multi Functional Hanger 47 179 18 15 19.8 9.9 9.4 8.25 MFT47/504BA Multi Functional Hanger 47 229 28 21 25.1 12.55 11.95 10.45 MFT50/346BA Multi Functional Hanger 50 150 12 13 12.8 6.4 6.1 5.3 MFT50/404BA Multi Functional Hanger 50 179 18 15 19.8 9.9 9.4 8.25 MFT50/504BA Multi Functional Hanger 50 229 28 21 25.1 12.55 11.95 10.45 MFT63/346BA Multi Functional Hanger 63 142 12 13 12.8 6.4 6.1 5.3 MFT63/404BA Multi Functional Hanger 63 170 18 15 19.8 9.9 9.4 8.25 MFT63/504BA Multi Functional Hanger 63 220 28 21 25.1 12.55 11.95 10.45 MFT76/346BA Multi Functional Hanger 76 135 12 13 12.8 6.4 6.1 5.3 MFT76/404BA Multi Functional Hanger 76 164 18 15 19.8 9.9 9.4 8.25 MFT76/504BA Multi Functional Hanger 76 214 28 21 25.1 12.55 11.95 10.45 MFT90/346BA Multi Functional Hanger 90 128 12 13 12.8 6.4 6.1 5.3 MFT90/404BA Multi Functional Hanger 90 157 18 15 19.8 9.9 9.4 8.25 MFT90/504BA Multi Functional Hanger 90 207 28 21 25.1 12.55 11.95 10.45 MFT100/346BA Multi Functional Hanger 100 123 12 13 12.8 6.4 6.1 5.3 MFT100/404BA Multi Functional Hanger 100 152 18 15 19.8 9.9 9.4 8.25 MFT100/504BA Multi Functional Hanger 100 202 28 21 25.1 12.55 11.95 10.45 MFT125/346BA Multi Functional Hanger 125 110 12 13 12.8 6.4 6.1 5.3 MFT125/404BA Multi Functional Hanger 125 140 18 15 19.8 9.9 9.4 8.25 MFT125/504BA Multi Functional Hanger 125 190 28 21 25.1 12.55 11.95 10.45 MFT150/346BA Multi Functional Hanger 150 98 12 13 12.8 6.4 6.1 5.3 MFT150/404BA Multi Functional Hanger 150 127 18 15 19.8 9.9 9.4 8.25 MFT150/504BA Multi Functional Hanger 150 177 28 21 25.1 12.55 11.95 10.45 www.tecoproducts.co.uk 9 Heavy Face Fix Hangers HWT Features: • All Hangers come up 150mm deep. • M10 & M12 Bolt Holes for added versatility. • 95mm Bearing. • Versatile design enables specials to be ordered in a variety of depths and widths. • Available in standard (HWTNT) or with concealed flanges (HWT-I). HWTNT JOIST HANGERS • Available in Stainless Steel. Code Product Number of nails Dimensions (mm) (30 x 3.75) Width Height Header Joist Product Pre Galvanised Steel - 2.4mm Square Twist Product Product Number of nails Dimensions (mm) (30 x 3.75) Width Height Header Joist Stainless Steel - 2mm Annular Ring HWTNT38 HWT-NT Joist Hanger 38 150 20 16 HWTSS38 HWT Joist Hanger 38 150 20 16 HWTNT44 HWT-NT Joist Hanger 44 150 20 16 HWTSS50 HWT Joist Hanger 50 150 20 16 HWTNT50 HWT-NT Joist Hanger 50 150 20 16 HWTSS63 HWT Joist Hanger 63 150 20 16 HWTNT63 HWT-NT Joist Hanger 63 150 20 16 HWTSS76 HWT Joist Hanger 76 150 20 16 HWTNT76 HWT-NT Joist Hanger 76 150 20 16 HWTSS80 HWT Joist Hanger 80 150 20 16 HWTNT80 HWT-NT Joist Hanger 80 150 20 16 HWTSS90 HWT Joist Hanger 90 150 20 16 HWTNT90 HWT-NT Joist Hanger 90 150 20 16 HWTSS100 HWT Joist Hanger 100 150 20 16 HWTNT100 HWT-NT Joist Hanger 100 150 20 16 HWTSS125 HWT Joist Hanger 125 150 20 16 HWTNT125 HWT-NT Joist Hanger 125 150 20 16 HWTSS150 HWT Joist Hanger 150 150 20 16 HWTNT150 HWT-NT Joist Hanger 150 150 20 16 HWTSS175 HWT Joist Hanger 175 150 20 16 HWTNT175 HWT-NT Joist Hanger 175 150 20 16 HWTSS200 HWT Joist Hanger 200 150 20 16 HWTNT200 HWT-NT Joist Hanger 200 150 20 16 HWTSS225 HWT Joist Hanger 225 150 20 16 HWTNT225 HWT-NT Joist Hanger 225 150 20 16 HWTSS250 HWT Joist Hanger 250 150 20 16 HWTNT250 HWT-NT Joist Hanger 250 150 20 16 HWTSS300 HWT Joist Hanger 300 150 20 16 HWTNT275 HWT-NT Joist Hanger 275 150 20 16 HWTNT300 HWT-NT Joist Hanger 300 150 20 16 Code Product Product Dimensions (mm) Width Height Pre Galvanised Steel - 2.4mm 10 Code Number of nails (30 x 3.75) Header Joist Square Twist HWTI90 HWT-I Concealed Flange 90 150 20 16 HWTI100 HWT-I Concealed Flange 100 150 20 16 HWTI125 HWT-I Concealed Flange 125 150 20 16 HWTI150 HWT-I Concealed Flange 150 150 20 16 HWTI200 HWT-I Concealed Flange 200 150 20 16 HWTI225 HWT-I Concealed Flange 225 150 20 16 HWTI250 HWT-I Concealed Flange 250 150 20 16 HWTI300 HWT-I Concealed Flange 300 150 20 16 HWTI www.tecoproducts.co.uk TECO Truss Clips TCP & TCW Application: Used to fix trusses, girders and rafters to the wall plate. Features: TRUSS CLIPS & GIRDER HANGERS • Available in two styles, Truss Clip Woody (TCW) & Truss Clip Pye (TCP). • Installation prongs on the TCW to aid location. TCP • Superior design loads on TCW. Code Product Number of nails (30 x 3.75) Width Pre Galvanised Steel - 1mm TCW Characteristic Value (kN) for Eurocode 5 Safe Working Load (kN) for BS5268 Short Term uplift 1.44 Square Twist TCP38 Pye Truss Clip 38 13 2.88 TCP50 Pye Truss Clip 50 13 2.88 1.44 TCW38 Woody Truss Clip 38 12 6.36 3.18 TCW47 Woody Truss Clip 47 12 6.36 3.18 TCW50 Woody Truss Clip 50 12 6.36 3.18 TCWSS38 Woody Truss Clip 38 38 12 6.36 3.18 TCWSS47 Woody Truss Clip 47 47 12 6.36 3.18 Stainless Steel - 1mm Annular Ring TECO Girder Truss Shoes GTS & MGTS Application: GTS For supporting Truss Rafters, fully adjustable for depths between 100 to 225mm. TECO Mini GTS For short span, mono or in-fill trusses 100mm deep. Features: • Tag on the base of the hanger to help avoid rotation and aid fast, accurate location. The tag can easily be bent if not required. • Increased bearing. Installation: GTS • All holes should be nailed using 30 x 3.75 square twist nails or equivalent. Code Product Product Dimensions (mm) Width Leg Bearing Characteristic Value (kN) for Eurocode 5 MGTS Safe Working Load for BS5268 (kN) Short Medium Long Term Term Term Pre Galvanised Steel - 1.2mm GTS38 Woody Girder Truss Shoe 38 300 85 17.45 8.73 8.31 7.27 GTS50 Woody Girder Truss Shoe 50 300 85 17.45 8.73 8.31 7.27 GTS63 Woody Girder Truss Shoe 63 300 85 17.45 8.73 8.31 7.27 GTS76 Woody Girder Truss Shoe 76 300 85 17.45 8.73 8.31 7.27 GTS100 Woody Girder Truss Shoe 100 300 85 17.45 8.73 8.31 7.27 MGTS38 Mini Girder Truss Shoe 38 100 85 - - - - MGTS50 Mini Girder Truss Shoe 50 100 85 - - - - To order or find out more call 01273 423 983 or scan the QR code. www.tecoproducts.co.uk 11 TECO Girder to Girder Hangers GG Application: • Multi Truss Heavy Duty Girder Hanger. TRUSS CLIPS & GIRDER HANGERS • Bolt sets available to order. • Bolt sets consist of 3 No. M20 x 180 Hex Bolts BZP with 120mm thread, 3 No. M20 x 65mm Round Washers and 3 No. M20 x 40mm Round Washers. Features: • Galvanised after manufacture. • 3mm thick. GG • Holed for M20 bolts. Code Product Dimensions (mm) Joist Width Height bearing Product Characteristic Value (kN) for Eurocode 5 Safe Working Load for BS5268 (kN) Short Medium Long Term Term Term Galvanised after manufacture - 3mm GG80 Girder to Girder Hanger 80 550 120 60.48 30.24 28.8 25.2 GG100 Girder to Girder Hanger 100 550 120 60.48 30.24 28.8 25.2 GG120 Girder to Girder Hanger 120 550 120 60.48 30.24 28.8 25.2 GG150 Girder to Girder Hanger 150 550 120 60.48 30.24 28.8 25.2 GGBOLT Girder to Girder Bolt Set - - - - - - - TCW GTS GG To order or find out more call 01273 423 983 or scan the QR code. 12 www.tecoproducts.co.uk TECO Straps - Traditional LD & HD Traditional Heavy and Light Duty Restraint Straps designed to The Building Regulations BS 5268 Part 3 and other building standards for vertical restraint (LD) or lateral restraint (HD). Features: STRAPS, WATERBAR & BANDING • Popular stock sizes are listed below but straps can be ordered to any length up to 15m. • Holed 6mm at 25mm offset centres. • Available in Galvanised or Stainless Steel. Light Duty Application: Light Duty Restraint Straps are generally for vertical applications such as holding down the wallplate. Installation: When used as a vertical restraint to hold down a wallplate, use a minimum length of 900mm. Galvanised LD Straps • Use min 10 No. 3.75x30mm square twist nails or 6 No. 4mmx40mm screws (drilled and plugged) into the masonry. • Use min 2 No. 3.75x30mm square twist nails into wall plate. Stainless Steel • Use min 10 No. 3.75x30mm annular ring shank nails stainless steel or 6 No. 4mmx40mm stainless steel screws (drilled and plugged) into the masonry. • Use min 2 No. 3.75x30mm annular ring shank stainless steel nails into wall plate. Heavy Duty Application: Heavy Duty Restraint Straps are generally for horizontal applications providing lateral restraint of roof trusses, rafters and joists tied to masonry. HD Bent Installation: When used as a lateral restraint: Galvanised • Use min 7 No. 3.75x30mm square twist nails or equivalent fixed to timber joists/rafters. Stainless Steel • Use min 7 No. 3.75x30mm annular ring shank stainless steel nails or equivalent fixed to timber joists/rafters. Popular sizes are listed below. For a full range of sizes please contact our sales team or visit our website. Code Product Product Dimensions (mm) Overall length including bend Light Duty Galv Bent LD600B100 LD1000B100 300 100 Light Duty Galv Bent 600 100 Light Duty Galv Bent 1000 100 LD1200B100 Light Duty Galv Bent 1200 100 LD1000F Light Duty Galv Flat 1000 - LD600T100 Light Duty Galv Twisted 600 100 LD1000T100 Light Duty Galv Twisted 1000 100 Stainless Steel - 2.4mm LDSS1000B100 Light Duty Stainless Bent 1000 100 LDSS1000F Light Duty Stainless Flat 1000 - www.tecoproducts.co.uk Product Product Dimensions (mm) Overall length including bend Length of bend or twist Pre Galvanised - 4mm Pre Galvanised - 2.4mm LD300B100 Code Length of bend or twist HD1000B100 HD1200B100 HD1600B100 HD1600B150 HD1000F HD1000T100 Heavy Duty Galv Bent Heavy Duty Galv Bent Heavy Duty Galv Bent Heavy Duty Galv Bent Heavy Duty Galv Flat Heavy Duty Galv Twisted 1000 1200 1600 1600 1000 1000 100 100 100 150 100 1000 1200 1000 1000 100 100 100 Stainless Steel - 4mm HDSS1000B100 HDSS1200B100 HDSS1000F HDSS1000T100 Heavy Duty Stainless Bent Heavy Duty Stainless Bent Heavy Duty Stainless Flat Heavy Duty Stainless Twisted 13 TECO Straps - Heavy Engineered ESH Application: STRAPS, WATERBAR & BANDING The TECO ESH Heavy Engineered Strap is lightweight to handle, yet retains its structural strength so it can be used instead of a traditional Heavy Duty Strap in both Horizontal and Vertical applications, providing lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wallplate. Designed to The Building Regulations BS 5268 Part 3 and other building standards for vertical and lateral restraint. Features: • Lightweight design makes it easy to handle. • No need to notch joists making it easier and quicker to install. • Easier to build into brickwork courses. ESH • More cost effective when compared to the traditional Heavy Duty Strap and Heavy Edge Rolled Strap. • One design for both horizontal and vertical applications. Installation: For Vertical applications • Use min 10 No. 3.75x30mm square twist nails or 6 No. 4mmx40mm screws (drilled and plugged) into the masonry. • Use min 2 No. 3.75x30mm square twist nails into wall plate. For Horizontal applications • Use min 7 No. 3.75x30mm square twist nails or equivalent fixed to timber joists/rafters. Product Dimensions (mm) Code Product Overall length including bend Length of bend ESH Pre Galvanised - 1.4mm ESH600B100 Heavy Engineered Strap Bent 600 100 ESH800B100 ESH1000B100 Heavy Engineered Strap Bent 800 100 Heavy Engineered Strap Bent 1000 100 ESH1200B100 Heavy Engineered Strap Bent 1200 100 ESH1500B100 Heavy Engineered Strap Bent 1600 100 ESH1600B100 Heavy Engineered Strap Bent 1600 100 TECO Timber Frame Straps LDTF & HDTF Application: The Timber Frame Strap is a holding down strap providing restraint against uplift to timber frames. Features: • Holed 6mm at 25mm offset centres. • Available in two thicknesses. • Available in both Galvanised and Stainless Steel. Code Product Product Dimensions Thickness Overall length Pre Galvanised LDTF Timber Frame Strap 2.4 900 HDTF Timber Frame Strap 4 900 LDTF Stainless Steel 14 LDTFSS Timber Frame Strap 2.4 900 HDTFSS Timber Frame Strap 4 900 www.tecoproducts.co.uk TECO Straps - Heavy Edge Rolled ER Application: STRAPS, WATERBAR & BANDING The ER Strap has rolled edges along the entire strap making it feel substantial for those that prefer a more traditional strap without the full cost. In tests the TECO ER Strap performed equally as well as or better than the equivalent traditional 5mm Heavy Duty Strap, providing lateral restraint of roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint. Features: • Lighter design makes it easier to handle. • More cost effective when compared to the traditional Heavy Duty Strap. • Available Flat, Bent or Twisted. • 2.5mm thick rolled to 5mm. ER • 30mm wide. • Holed 6mm at 25mm offset centres. Installation: • When used as a lateral restraint; use minimum 6 No. 4x75mm round wire nails or equivalent fixed to timber joists/rafters. Code Product Product Dimensions (mm) Overall length including bend Length of bend Pre Galvanised - 2.4mm ER600B100 Edge Rolled Bent 600 100 ER600B150 Edge Rolled Bent 600 150 ER1000B100 Edge Rolled Bent 1000 100 ER1000B150 Edge Rolled Bent 1000 150 ER1200B100 Edge Rolled Bent 1200 100 ER1200B150 Edge Rolled Bent 1200 150 ER1600B100 Edge Rolled Bent 1600 100 ER1600B150 Edge Rolled Bent 1600 150 ER1800B100 Edge Rolled Bent 1800 100 ER1800B150 Edge Rolled Bent 1800 150 ER2000B150 Edge Rolled Bent 2000 150 Code Product Product Dimensions (mm) Overall length Length of bend or twist Pre Galvanised - 2.4mm ER600F Edge Rolled Flat 600 - ER1000F Edge Rolled Flat 1000 - ER1200F Edge Rolled Flat 1200 - ER1400F Edge Rolled Flat 1400 - ER1600F Edge Rolled Flat 1600 - ER1800F Edge Rolled Flat 1800 - Code Product Product Dimensions (mm) Overall length including twist Length of twist Pre Galvanised - 2.4mm ER600T100 Edge Rolled Twisted 600 100 ER1000T100 Edge Rolled Twisted 1000 100 ER1200T150 Edge Rolled Twisted 1200 150 ER1600T150 Edge Rolled Twisted 1600 150 ER1800T100 Edge Rolled Twisted 1800 100 www.tecoproducts.co.uk 15 TECO Fixing Band FB Application : A versatile multi purpose banding that can be cut, bent and formed for all types of light applications. Ideal for DIY, industrial and agricultural use. STRAPS, WATERBAR & BANDING Features: • Available in Stainless Steel and Galvanised. • Multiple hole sizes to add to its versatility. Holes: • 3.75 Round, M10 Round, M6 & M8 Square. • The square holes are suitable for Cup Square Hex (Coach Bolts). Code FBG Product Dimensions Width Length (mm) (m) Product Pre Galvanised Steel - 0.9mm FBG Fixing Band 20 10 20 10 Stainless Steel - 0.7mm FBS Fixing Band TECO Scaffold Board End Band SCAFF SCAFF Application: Metal end band for use with standard scaffolding boards. Features: • Available with Bent or Crimped ends. Code Product Dimensions (mm) Thickness Width Length Product Galvanised SCAFF/B Scaffold Board End Bent 0.6 25 540 SCAFF/C Scaffold Board End Crimped 0.6 25 540 TECO Waterbar WB Application: A steel bar for fitting into door sills for weather protection. Features: • Available in Galvanised as standard or Stainless Steel for added durability. • Special lengths are available to order. Code Product Product Dimensions (mm) Thickness Width Length Galvanised WB30X2.5 Waterbar 2.4 28 1000 WB30X2.5/2 Waterbar 2.4 28 2000 WB30X2.5/3 Waterbar 2.4 28 3000 WB30X5 Waterbar 4 28 1000 WB30X5/2 Waterbar 4 28 2000 WB30X5/3 Waterbar 4 28 3000 WB Stainless Steel WBSS27.5X4 16 Waterbar 4 28 1000 www.tecoproducts.co.uk TECO Timber Connectors - Tooth Plate Code Product TCDS & TCSS Product Dimensions Diameter (mm) Hole size Pre Galvanised Mild Steel TC Double Sided 38 M12 TCDS38M10 TC Double Sided 38 M10 TCDS50 TC Double Sided 50 M12 TCDS50M10 TC Double Sided 50 M10 TCDS50M16 TC Double Sided 50 M16 TCDS63 TC Double Sided 63 M12 TCDS63M10 TC Double Sided 63 M10 Application: TCDS63M16 TC Double Sided 63 M16 TCDS76 TC Double Sided 76 M12 Single and double sided Tooth Plate Connectors are for improving bolt performance in timber. TCDS76M16 TC Double Sided 76 M16 TCSS38 TC Single Sided 38 M12 TCSS38M10 TC Single Sided 38 M10 TCSS50 TC Single Sided 50 M12 TCSS50M10 TC Single Sided 50 M10 TCSS50M16 TC Single Sided 50 M16 TCSS63 TC Single Sided 63 M12 Timber Connectors are easily installed devices for improving the efficiency of timber structures. They increase the joint strength, reduce the size of members required for a given load, and simplify fabrication and erection. The use of connectors in timber structures can make it possible to develop the full allowable load of the members connected and in some circumstances, make a joint stronger than the members themselves. TCSS63M10 TC Single Sided 63 M10 Features: TCSS63M16 TC Single Sided 63 M16 TCSS76 TC Single Sided 76 M12 TCSS76M16 TC Single Sided 76 M16 TCSS TIMBER CONNECTORS TCDS38 TCDS • Available in a variety of diameters with various hole sizes. • Available in Galvanised and Stainless Steel. Specification: Stainless Steel TCDSSS50 TC Double Sided 50 M12 TCDSSS63 TC Double Sided 63 M12 TCDSSS76 TC Double Sided 76 M12 TCSSSS50 TC Single Sided 50 M12 TCSSSS63 TC Single Sided 63 M12 TCSSSS76 TC Single Sided 76 M12 • Type C6 & Type C7 according to EN 912:2011. TECO Timber Connector Tools TS Application: Tools to cut precision grooves or recesses (daps) for Split Ring and Shear Plate Connectors. The tools consist of a pilot, cutting blades and a depth gauge and can be used with a standard portable drill or drill press. Spare cutter sets are sold separately. Code Product Suitable for diameter (mm) Pilot (mm) 21.5 Shear Plates Tools TSP67 Shear Plate Tool 67 TSP67C Shear Plate (Spare Cutter Set) 67 - TSP102 Shear Plate Tool 102 21.5 TSP102C Shear Plate (Spare Cutter Set) 102 - 12 Split Ring Tools TSR64 Split Ring 64mm Tool 64 TSR64C Split Ring (Spare Cutter Set) 64 - TSR102 Split Ring Tool 102 21.5 TSR102C Split Ring (Spare Cutter Set) 102 - TS To order or find out more call 01273 423 983 or scan the QR code. www.tecoproducts.co.uk 17 TECO Timber Connectors - Shear Plate SPTC Application: Specially designed for heavy shear loads in timber to steel connections, but may be used for demountable timber to timber connections. Shear Plates are placed in recesses cut in the timber and provide a flush surface without projections which facilitates transport. A special tool is available for cutting the recesses (or daps) in the timber. For shear loads please refer to the relevant TECO Declaration of Performance or contact TECO for assistance. TIMBER CONNECTORS Features: • Holed for M20 Bolt. • 67mm Shear Plate available in three finishes, BZP, Galvanised & Stainless Steel. Specification: 67mm diameter • Type B2 according to EN 912:2011. 102mm diameter • Type B3 according to EN 912:2011. Code Product Product Dimensions Diameter (mm) Hole size Bright Zinc Plated (BZP) SPTC67 Shear Plate Connector (BZP) 67 M20 Shear Plate Connector (Galv) 67 M20 SPTCG102 Shear Plate Connector (Galv) 102 M20 67 M20 Hot Dipped Spun Heavy Duty Galvanised SPTCG67 Stainless Steel SPTCSS67 SPTC Shear Plate Connector (St/St) TECO Timber Connectors - Split Ring SRTC Application: Designed for heavy shear loads in timber to timber connections. The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity. The Ring is split across at one point, the split being in the form of a tongue and groove. The purpose of the tongue and groove is to provide for possible expansion or contraction of the timber. When the Ring is embedded in the timber, it can expand or contract with the wood, and thus at all times forms a tight and rigid connection. The Ring is sunk into the groove of one of the two facing members, and the other half into the groove of the other member, so that when the two members are joined face to face, the Ring is wholly embedded between them. The connecting through bolt, which formerly carried the stress in timber joints, is relieved of this stress by the embedded Split Ring, the bolt principally serves the purpose of holding two members together. A special tool is available for cutting the grooves in the timber. For loads please refer to the relevant TECO Declaration of Performance or contact TECO for assistance. Features: • Available in three finishes, BZP, Galvanised & Stainless Steel (Stainless Steel Split Rings may have parallel sides). Specification: • Type A3 acc. to EN 912:2011. Code Product Product Dimensions Diameter (mm) Bright Zinc Plated (BZP) SRTC64 Split Ring Connector (BZP) 64 Hot Dipped Spun Heavy Duty Galvanised SRTCG64 Split Ring Connector (Galv) 64 SRTCG102 Split Ring Connector (Galv) 102 Stainless Steel 18 SRTCSS64 Split Ring Connector (St/St) 64 SRTCSS102 Split Ring Connector (St/St) 102 SRTC www.tecoproducts.co.uk TECO Angle Brackets AB, CB, HRR & SP40 Application: General purpose brackets for all applications where one member crosses another or one member is trimmed into another. A full range of sizes and finishes are available to suit all applications. BRACKETS & FRAMING ANCHORS Features: ABLD, ABLDSS, HHR • Ideal for connecting Hand Rails in Galvanised and Stainless Steel for outdoor use. • The HHR comes in a kit form, 4 No. Brackets complete with stainless steel screws. AB90, AB150/90, AB150 • Heavy duty brackets with strengthening ribs on bend to give added rigidity. CB • Countersunk holes for a flush finish. SP40 AB90 • Designed to aid easy installation of cabinets and worktops. AB150/90 AB150 AB60 ABLD SP40 AB50 ABH Code Product Product Dimensions (mm) Width Legs Thickness Number of Fixing Holes per Bracket 3.75 6mm M8 M10 M10 Slots Pre Galvanised Mild Steel ABLD Angle Bracket 28 50 x 50 2.4 - 4 - - ABH Angle Bracket 20 50 x 50 4 - 4 - - - AB50 Angle Bracket 62 50 x 50 2.4 11 9 - - 2 AB60 Angle Bracket 62 60 x 40 2.4 13 7 - - 2 AB90 Angle Bracket 62 90 x 90 2.4 15 - 4 3 2 AB150/90 Angle Bracket 62 150 x 90 2.4 23 - 6 3 4 AB150 Angle Bracket 62 150 x 150 2.4 19 - 5 3 3 ABLDSS Angle Bracket 28 50 x 50 2.4 - 4 - - - ABSS50 Angle Bracket 62 50 x 50 2.4 11 9 - - 2 ABSS60 Angle Bracket 62 60 x 40 2.4 13 7 - - 2 ABSS90 Angle Bracket 62 90 x 90 2.4 15 - 4 3 2 ABSS150/90 Angle Bracket 62 150 x 90 2.4 23 - 6 3 4 ABSS150 Angle Bracket 62 150 x 150 2.4 19 - 5 3 3 HHR Hand Rail Bracket kit 28 50 x 50 2.4 - 4 - - - Code Product Stainless Steel Product Dimensions (mm) Width Legs Thickness Suitable for screws only 4mm Screw 5mm Screw 4mm Slot Zinc & Yellow Passivated CB50 Corner Brace 16 50 x 50 1.5 4 - CB75 Corner Brace 17 75 x 75 1.5 4 - - CB100 Corner Brace 22 100 x 100 2 - 6 6 CB150 Corner Brace 26 150 x 150 2.5 - 6 6 SP40 Stretchure Plate 39 27 x 27 1.8 2 - 2 www.tecoproducts.co.uk - 19 TECO Framing Anchors T & TUNI Application For stronger nailed joints and economical secondary connections in timber framing. Framing Anchors are an effective, versatile and economical method of providing strong, mechanical joints. Suitable for timber of minimum 44 x 44 section. BRACKETS & FRAMING ANCHORS Features: TAL Type A,B & C • The bent section is 41mm square on all types. • Each Anchor has a large hole to permit the fixing of covering surface materials. TUNI TAR • Universal Anchor that can be bent on site to suit all applications. TUNI TBR Code Product Product Dimensions (mm) Width Height Pre Galvanised - 1mm Number of nails (30 x 3.75) Square Twist TAL Trip-L-Grip Framing Anchor AL 40 x 40 124 12 TAR Trip-L-Grip Framing Anchor AR 41 x 59 124 12 TBL Trip-L-Grip Framing Anchor BL 41 x 59 124 12 TBR Trip-L-Grip Framing Anchor BR 41 x 59 124 12 TCL Trip-L-Grip Framing Anchor CL 41 x 59 124 12 TCR Trip-L-Grip Framing Anchor CR 41 x 59 124 12 TUNI Trip-L-Grip Framing Anchor Universal 40 x 40 124 12 40 x 40 124 Stainless Steel - 1mm TSSUNI TBL TCL Annular Ring Trip-L-Grip Universal 12 TCR TECO Framing Anchors Du-al-Clips DL & DR Application: An all purpose framing anchor with dual-grip action for rigidity in lighter timber structures. The Du-al-Clip is an alternative to the TECO Trip-L-Grip Framing Anchor where lighter loads and shorter spans permit. Provides nailing on two surfaces for jointing two timber members, where one member crosses or is trimmed to another (as in the fixing of suspended ceiling, framework to the underside of trusses or beams, or in light studding and joist trimming). Features: • Only 89mm high, each flange being 44 x 36mm. • Hook that can be tacked in position before nailing. • Each Anchor has two large holes to permit the fixing of a surface covering. Code Product Product Dimensions (mm) Flange Height Pre Galvanised - 1mm 20 DR Number of nails (30 x 3.75) Square Twist DL Du-al-Clip Left Hand 36 x 44 89 8 DR Du-al-Clip Right Hand 36 x 44 89 8 DL www.tecoproducts.co.uk TECO Nail Plates NP Application: A versatile plate used to connect or repair timber. NAIL PLATES & CONNECTOR PLATES Features: • Strengthening ribs for added rigidity. • All holes are pressed countersunk to aid location of the nail and to give a flush finish. Code NP Product Dimensions (mm) Width Length Product Pre Galvanised - 1mm 178 Product Dimensions (mm) Width Length NPSTD Nail Plate Galvanised 85 NP85X87 Nail Plate Galvanised 85 87 NP85X350 Nail Plate Galvanised 85 338 Stainless Steel - 1mm NP41X152 Nail Plate Galvanised 42 154 NPSSSTD Nail Plate Stainless 85 NP42X175 Nail Plate Galvanised 42 178 NPSS85X87 Nail Plate Stainless 85 89 NP103X152 Nail Plate Galvanised 104 154 NPSS42X175 Nail Plate Stainless 42 178 NP170X175 Nail Plate Galvanised 169 178 NPSS170X175 Nail Plate Stainless 169 178 NP170X350 Nail Plate Galvanised 178 338 NPSS170X350 Nail Plate Stainless 178 338 TECO Flat Connector Plates Code Product 178 CP, TP & FAB Application: An easy to use plate to connect two or more timbers or for use in general repair projects. A wide range of flat plate connectors to suit all applications. Features: CP & TP • Countersunk holes for a flush finish. • Holed for nails or screws. FAB • Holed for 3.75 square twist nails, 6mm screws, M8, M10 bolts and M10 slots. • Heavy Duty 2.4mm thick. • Galvanised or Stainless Steel finish. Code Product Product Dimensions (mm) Thickness Width Length FAB Zinc & Yellow Passivated CP50 Corner Plate 1.5 13 CP75 Corner Plate 2 16 50 X 50 75X 75 CP100 Corner Plate 2 15 100 X 100 CP150 Corner Plate 2 22 150 X 150 TP75 Tee Plate 1.5 16 75 X 75 TP100 Tee Plate 2 30 140 X 110 Pre Galvanised Steel - 2.4mm FAB100 Jointing Plate 2.4 62 100 FAB180 Jointing Plate 2.4 62 180 FAB240 Jointing Plate 2.4 62 240 FAB300 Jointing Plate 2.4 62 300 CP TP Stainless Steel - 2.4mm FABSS100 Jointing Plate 2.4 62 100 FABSS180 Jointing Plate 2.4 62 180 FABSS240 Jointing Plate 2.4 62 240 FABSS300 Jointing Plate 2.4 62 300 www.tecoproducts.co.uk 21 TECO Sole Plate Anchor SP Application: Sole Plate Anchors are used to attach timber sole plates to concrete foundations. SOLE PLATES & SOLE PLATE CHANNELS Features: • Strengthening ribs for added rigidity. • All holes are pressed countersunk to aid location of the fixing and to give a flush finish. Code Product Product Dimensions (mm) Width Upstand Length Pre Galvanised - 1mm SP Sole Plate 85 40 135 SP42 Sole Plate 42 40 135 SP Stainless Steel - 1mm SPSS Sole Plate 85 40 135 SPSS42 Sole Plate 42 40 135 SP42 TECO Sole Plate Channel SPC Application: The Sole Plate Channel is fixed to the concrete base before installation of the sole plate and then secured either side using the holes provided. This system provides a quick and simple solution to aid with the correct alignment of the sole plate, as well as securing it firmly to the concrete base. Features: • Quick and easy alignment of Sole Plate. • 3.75mm nail holes. • 8mm holes for suitable concrete fixings. Code Product Product Dimensions (mm) Width Length Pre Galvanised - 1mm SPC75 Sole Plate Channel 75 200 SPC90 Sole Plate Channel 90 200 SPC96 Sole Plate Channel 96 200 SPC140 Sole Plate Channel 140 200 SPC152 Sole Plate Channel 152 200 SPC To order or find out more call 01273 423 983 or scan the QR code. 22 www.tecoproducts.co.uk TECO Frame Cramps FFCG & FFCS Application: Traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in Galvanised with fishtailed end or Stainless Steel with safety end. FRAME CRAMPS & FRAME TIES Features: FFCG - Fishtailed Frame Cramp Galvanised • 50mm upstand for easy fixing. • Two 6mm holes and one 8mm hole. FFCG • Galvanised after manufacture for superior corrosion resistance. FFCS - Safety End Frame Cramps Stainless • Two 6mm holes and one 9mm hole. Code Product Dimensions (mm) Width Upstand Length Product FFCS Heavy Duty Hot Dipped Spun Galvanised - 2.3mm FFCG150 Fishtailed Frame Cramp 25 50 100 FFCG200 Fishtailed Frame Cramp 25 50 150 FFCG250 Fishtailed Frame Cramp 25 50 200 100 Stainless Steel - 2mm FFCS150 Frame Cramp 19 44 FFCS200 Frame Cramp 19 44 150 FFCS250 Frame Cramp 19 44 200 TECO Screw Ties SFT & ST Application: Screw Ties are used to tie timber door and window frames to adjacent brickwork. SFT Features: • Available in two finishes; Yellow Passivated Mild Steel or Stainless Steel. • Threaded one end. Code Product Dimensions (mm) Dia. Length Product Yellow Passivated ST ST Screw Tie 5 150 Screw in Frame Tie 3 130 Stainless Steel SFT TECO Window Board Tie WBT WBT Application: A bracket designed as a simple solution for fixing down the window board. Code Product Product Dimensions (mm) Width Upstand Length Number of holes per Tie 4mm 6mm Pre Galvanised Steel - 2.4mm WBT Window Board Tie www.tecoproducts.co.uk 12 22 147 3 2 23 TECO Angle Bead Standard ABG & ABS Application: Angle Bead is used to provide a true, straight corner which protects and reinforces a 2 or 3 coat plaster or render application in its most vulnerable area. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended, stainless steel or uPVC should be used. Code Product Length (m) BEAD & MESH Pre Galvanised Mild Steel ABG ABG2.4 Standard Angle Bead 2.4 ABG3 Standard Angle Bead 3 Standard Angle Bead 3 Stainless Steel ABS3 TECO Mini Mesh MMG Application: Galvanised Mini Mesh Beads for internal thin-coat plaster application. Mini Mesh Bead is used to reinforce and protect one-coat finish of plaster on corners at its weakest point on internal walls and plasterboard. The Mini Mesh Bead has a greater area of expanded metal therefore gives a better mechanical key. Code Product Length (m) Pre Galvanised Mild Steel MMG2.4 Mini Mesh 2.4 MMG3 Mini Mesh 3 TECO Skim Bead (Thin Coat) MMG SBG Application: Skim Bead for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points. Code Product Length (m) Pre Galvanised Mild Steel SBG2.4 Skim Bead 2.4 SBG3 Skim Bead 3 TECO External Render Stop (Bell Bead) SBG ERS Application: External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a run-off for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sheltered areas only, stainless steel for all other areas including coastal. Plaster depth 16 to 20mm. Code Product Length (m) Pre Galvanised Mild Steel ERSG2.4 External Render Stop 2.4 ERSG3 External Render Stop 3 External Render Stop 3 ERS Stainless Steel ERSS3 24 www.tecoproducts.co.uk TECO Plaster Stop PSG, PSTC & PSS Application: Plaster Stop bead provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended, stainless steel or uPVC should be used. Features: • PSTC For Thin Coat application. Code Product BEAD & MESH • PSG For use on traditional wet 2 or 3 coat plaster application. PSG Length (m) Size (mm) Pre Galvanised Mild Steel PSG2.4X10 Plaster Stop 2.4 10 PSG2.4X13 Plaster Stop 2.4 13 PSTCG2.4 Thin Coat Plaster Stop 2.4 3 PSG3X10 Plaster Stop 3 10 PSG3X13 Plaster Stop 3 13 PSTCG3 Thin Coat Plaster Stop 3 3 Plaster Stop 3 13 Stainless Steel PSS3X13 PSTC TECO uPVC Bead PB Application: An alternative range of impact resistant dry lining and wet plaster beads for internal or external use. uPVC Plaster Beads are designed for use externally where galvanised beads cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where prolonged drying out periods may be necessary. Features: • Simple installation (with plaster dabs or stainless steel fixings). PBAR • No sharp edges, and safe to handle. • Easy to cut (by use of tin snips or fine tooth saw). • Non corrosive. • uPVC Bead is supplied as standard in white, although many colours are available upon request by supplying us with the relevant ‘RAL’ reference code. Code Product Bead Length (mm) Plaster Depth (mm) uPVC PB13/19 Angle Bead 2500 13 to 19 PB2/3 Angle Bead 2500 2 to 3 PB6/10 Angle Bead 2500 6 to 10 PB8/12 Angle Bead 2500 8 to 12 PBAR Arch Bead 2500 2 to 3 PBERS6/12 External Render Stop 2500 6 to 12 PBERS12/22 External Render Stop 2500 12 to 22 PBPS6/8 Plaster Stop 2500 6 to 8 PBPS10/12 Plaster Stop 2500 10 to 12 PBPS15/17 Plaster Stop 2500 15 to 17 PBPS20/22 Plaster Stop 2500 20 to 22 www.tecoproducts.co.uk PB PBPS 25 TECO Drywall Tape TAPEDW Application: BEAD & MESH A range of professional internal plastering joint tapes. Drywall Tape is used for reinforcing joints and patching repairs on plasterboard. Code Product Product Dimensions Width (mm) Length (m) TAPEDW Drywall Joint Tape 50 90 TAPEDW75 Drywall Joint Tape 75 90 TAPEDW100 Drywall Joint Tape 100 90 TECO Corner Tape TAPEDW CT Application: Corner Tape is designed for finishing inside and outside drywall corners and is also suitable for construction repair work. The flexible steel backing fits any angle where traditional beading cannot be used and can be easily cut to any length for minimum wastage. It is applied by using standard jointing compound. No nails or special tools are required. Corner Tape is made by bonding two corrosion resistant metal strips to paper jointing tape. It is very safe to use as there are no sharp edges compared to conventional beads. CT Code Product CT Corner Tape TECO Paper Tape Product Dimensions Width (mm) Length (m) 50 30 TAPEP Application: Paper Joint Tape is a creased, paper roll, manufactured from cross-fibre paper giving strength through the width and length of the tape. It is designed for reinforcing joints and internal corners on gypsum drywall interiors. The tape is perforated and centre creased to enable excellent bonding. The roll is supplied in a dispenser box and is easily cut to length. It is applied using standard jointing compound. No nails or special tools required. Code Product TAPEP Paper Plasterboard Joint Tape TAPEP Product Dimensions Width (mm) Length (m) 50 150 To order or find out more call 01273 423 983 or scan the QR code. 26 www.tecoproducts.co.uk TECO Alkaline Resistant Render Mesh ARRM Application: A reinforcing mesh which is made from woven fibre-glass yarns and coated with an alkaline resistant latex. This coating prevents the alkaline present in cements from degrading the glass fibre, resulting in reduced strength. The mesh is ideal for use in construction and is mainly used to reinforce concrete, cement, screeds, renders and plasters. It is an ideal reinforcement for render, even where cracking can be seen and allows previously uneven masonry substrates to be rendered. BEAD & MESH Installation: The majority of manufacturers recommend the placement of meshes to be within the first 50% of the render / plaster depth. In general, the nearer the mesh to the substrate, the better. ARRM Storage: Store rolls in a cool, dry location, away from direct contact with the ground or concrete, out of direct sunlight. Protect rolls from weather and other damage. Store individual rolls or roll cases on end. Code Product Width (m) Product Dimensions Length (m) Mesh size (mm) Colour : Pink or White ARRM Alkaline Resistant Render Mesh 1 50 4x4 TECO Expanded Metal Lath Coil (Brick Reinforcement) EMLG & EMLS Application: Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. Code Product Product Dimensions Width (mm) Length (m) Galvanised EMLG63 EML Galv 63 20 EMLG100 EML Galv 100 20 EMLG175 EML Galv 175 20 EMLG225 EML Galv 225 20 EMLG305 EML Galv 305 20 EML Stainless Steel EMLS63 EML Stainless 63 20 EMLS100 EML Stainless 100 20 EMLS175 EML Stainless 175 20 EMLS225 EML Stainless 225 20 TECO Hex Mesh HM Application: Hex Mesh Netting is used for floor screed reinforcement and roof insulation. Features: • Hot dipped galvanised prior to weaving. Code Product Product Dimensions Width (mm) Length (m) Galvanised HM900 Hex Mesh www.tecoproducts.co.uk 900 50 HM900 27 TECO Expanded Metal Lath Sheet EML8x2 & EMLS8x2 Application: Expanded Metal Lathing is mainly used as a key for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended, Stainless Steel should be used. Installation: BEAD & MESH Fixing of Expanded Metal Lathing Sheets Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways. EML Timber Support To connect to timber use plasterer’s nails, screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight. Ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless products. Metal Support To fix to steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a 'hairpin' shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface. To Solid Background Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and large diameter headed screw/nail that will keep the sheets firmly in place. Code Product Product Dimensions (mm) Width Length Square Metre m² Pre Galvanised Mild Steel EML8X2 EML Sheet 2438 685 1.67 EML Sheet 2500 700 1.75 Stainless Steel EMLS8X2 TECO Soffit Vent Mesh SVM Application: Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Features: • Stainless Steel. • Supplied in a box dispenser. • Lightweight. SVM Code Product Product Dimensions Width (mm) Length (m) Stainless Steel SVM Soffit Vent Mesh 75 30 To order or find out more call 01273 423 983 or scan the QR code. 28 www.tecoproducts.co.uk TECO Rib Lath Sheet RLG & RLS Application: Rib Lath is stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended Stainless Steel should be used. Installation: Fixing of Rib Lath Sheets BEAD & MESH Rib Lath is fixed so that the tip of the rib is placed against the supporting background. The rib of the sheet should run at right angles to any supports. Ensure that sheets are overlapped by a minimum of 50mm end to end and by 25mm widthways and that the ribs are nestled together. RL Timber Support Rib Lath is fixed at each rib to timber supports using plasterer’s nails, screws or staples. Ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings for stainless steel. Metal Support Rib Lath is fixed at each rib to metal support using 1.63mm galvanised or stainless steel tying wire. When joining Rib Lath sheets overlap, the edge ribs and tie the edges with 1.22mm tying wire at 150mm centres. Solid Background Rib Lath can be fixed to a solid background using a suitable fixing which holds the ribs firmly against the background. Where sheets are installed vertically, fixings should be positioned through all ribs at 600mm centres to ensure adequate stability. Code Product Product Dimensions (mm) Width Length Square Metre m² Pre Galvanised RLG Rib Lath 2500 600 1.5 Rib Lath 2500 600 1.5 Stainless Steel RLS TECO Ladder Mesh (Brick Span) Code Product Product Dimensions (mm) Main Wire Width LMS Wall Width (mm) Stainless Steel - 3mm Wire LMS360 Ladder Mesh Stainless 3 60 100 LMS3100 Ladder Mesh Stainless 3 100 140 LMS3150 Ladder Mesh Stainless 3 150 190 LMS3160 Ladder Mesh Stainless 3 160 200 LMS3175 Ladder Mesh Stainless 3 175 215 Application: Ladder Mesh (Brick Span) is a welded ladder type Bed Joint Reinforcement generally used as a structural product, also ideal for crack control. Available in Stainless Steel Grade 304 BS EN 1.4301 and in numerous widths to suit any brick and block thickness. Ladder Mesh Masonry Reinforcement conforms to BS EN 845-3:2003+A1:2008. Features: Stainless Steel - 4mm Equivalent Flattened Wire LMS460 Ladder Mesh Stainless 4 60 100 LMS4100 Ladder Mesh Stainless 4 100 140 LMS4150 Ladder Mesh Stainless 4 150 190 LMS4160 Ladder Mesh Stainless 4 160 200 LMS4175 Ladder Mesh Stainless 4 175 215 • Three diameters of main wire available. • 2.5mm diameter cross wire at 450mm centres. • 2700mm long. Stainless Steel - 5mm Equivalent Flattened Wire LMS560 Ladder Mesh Stainless 5 60 100 LMS5100 Ladder Mesh Stainless 5 100 140 LMS5150 Ladder Mesh Stainless 5 150 190 LMS5160 Ladder Mesh Stainless 5 160 200 LMS5175 Ladder Mesh Stainless 5 175 215 www.tecoproducts.co.uk LMS 29 TECO Wall Starter Kits WST & WSTV Application: Stainless Steel Wall Starter systems join new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Features: WALLSTARTERS & TIES • Available in two grades of Stainless Steel. • Each pack contains the fixings necessary for a single leaf wall up to 2.4m/8' high. • Engineered for outstanding strength and performance. • Tested by CERAM Research Ltd. Code Product WST Product Dimensions (mm) Profile Profile Width Length Kit Length (2 x Profiles) (mm) Material Design Shear Strength per 2.4m 2400 Austenitic Stainless Steel (Grade 304) 12kN (5kN/metre)* Ferritic Stainless Steel (Grade 430) 5.1kN (2.12kN/metre)* Stainless Steel WST Wallstarter 41 1200 WSTV Wallstarter 41 1200 2400 *Fixing into existing AAC block work with a compressive strength of 3.5N/mm2 TECO Insulation Clip WTIC Application: The Universal Wall Tie Insulation Clip is a retaining clip used to hold insulation material against the inner wall of a cavity. Code Product WTIC Insulation Clip TECO Helical Bar Size Universal WTIC H Application: Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard reinforcing materials. Features: • Grade 304 austenitic stainless steel high stress material (Grade 316 available to order). • Excellent bonding capabilities, less intrusive than standard repairs. • Coiled spring properties within elastic limit. • No sudden or catastrophic failure point. Code Product Product Dimensions (mm) Dia. Length H Stainless Steel H61000 Helical Bar 6 1000 H62000 Helical Bar 6 2000 H81000 Helical Bar 8 1000 H82000 Helical Bar 8 2000 Accessories 30 HG3 Helical Bar Grout - 3 Litre GUNPOINT Pointing Gun Kit www.tecoproducts.co.uk TECO Standard Wall Ties WT WT - Housing Ties Type 4 Light Duty Ties offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to two storeys or a maximum 10m in height. Specification: Fully tested to BS EN846-5:2000, the ties meet the requirements of BS EN 845-1:2003 and DD140: Part 2. Product Tie Length (mm) Cavity Width (mm) Height (m) Pack Qty. WALLSTARTERS & TIES Code Stainless Steel Type 4 Housing Ties Part E Type A WT200 Housing Tie 200 50 to 75 10 250 WT225 Housing Tie 225 76 to 100 10 250 WT250 Housing Tie 250 101 to 125 10 250 WT200/50 Housing Tie 200 50 to 75 10 50 WT225/50 Housing Tie 225 76 to 100 10 50 WT250/50 Housing Tie 250 101 to 125 10 50 WT WTGP - General Purpose Wall Ties Type 2 General Purpose Ties offer a practical and cost effective solution for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys or a maximum 15m in height. Code Product Tie Length (mm) Cavity Width (mm) Height (m) Pack Qty. Stainless Steel Type 2 Housing Ties Part E Type B WTGP200 General Purpose Tie 200 50 to 75 15 250 WTGP225 General Purpose Tie 225 76 to 100 15 250 WTGP200/50 General Purpose Tie 200 50 to 75 15 50 WTGP225/50 General Purpose Tie 225 76 to 100 15 50 WTGP WTDT - Double Triangle Wall Ties The traditional wall tie for domestic houses and small commercial buildings of up to three stories or a maximum 15m in height. Specification: Fully tested to BS EN 846-5:2000, the ties meet the requirements of BS EN 845-1:2003 and DD140: Part 2. Code Product Tie Length (mm) Cavity Width (mm) Height (m) Pack Qty. Stainless Steel Type 2 Housing Ties Part E Type B WTDT225 Double Triangle Tie 225 50 to 75 15 250 WTDT250 Double Triangle Tie 250 76 to 100 15 250 WTDT300 Double Triangle Tie 300 76 to 100 15 250 HWTDT/25 Double Triangle Wall Ties 250 76 to 100 15 25 WTDT WTB - Butterfly Wall Ties Traditional Butterfly Wall Tie previously to BS1243. The central twist must be placed down the cavity to prevent moisture travelling across the cavity. Specification: Accepted as Type A (sound). Code Product Tie Length (mm) Pack Qty. Stainless Steel WTB200 Butterfly Wall Tie 200 250 WTB225 Butterfly Wall Tie 225 250 WTB250 Butterfly Wall Tie 250 250 www.tecoproducts.co.uk WTB 31 TECO Starter Ties SST Application: Starter Ties are used where new walls are being built directly from existing brickwork. Sizes 150mm and above have a drip feature for use where there is a cavity and a new wall needs to be built. Features: WALLSTARTERS & TIES • Supplied complete with nylon plug. Code Product Product Dimensions (mm) Length Dia. Stainless Steel SST Starter Tie 130 4 SST150 Starter Tie 150 4 SST180 Starter Tie 180 4 SST200 Starter Tie 200 4 SST225 Starter Tie 225 4 SST275 Starter Tie 275 4 TECO Timber Frame Ties SST TFT Application: Timber Frame Ties suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/ commercial buildings up to 4 storeys and not greater than 15m in height. Features: • Complies with a DD140 Type 6 tie, meets with the appropriate parts of NHBC standards. • Tested by CERAM Research Ltd. • Supplied with nails included. Code Product Product Dimensions (mm) Tie Width Tie Length Cavity Width (mm) Stainless Steel to BSEN 10088-2 grade 1.4301 (Grade 304) TFT50 Timber Frame Tie 50mm 19 130 TFT75 Timber Frame Tie 75mm 19 155 75 to 99 TFT100 Timber Frame Tie 100mm 19 180 100 to 120 TECO Movement Ties TFT 50 to 74 MT Application: Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Features: • All movement ties come complete with sleeve. • Additional sleeves available to order. Code Product Product Dimensions (mm) Width Length MT Stainless Steel 32 MT150 Movement Tie c/w sleeve 19 150 MT175 Movement Tie c/w sleeve 19 175 MT200 Movement Tie c/w sleeve 19 200 MT225 Movement Tie c/w sleeve 19 225 MT250 Movement Tie c/w sleeve 19 250 MT300 Movement Tie c/w sleeve 19 300 MTDS Sleeve - 100 www.tecoproducts.co.uk TECO Arris Rail Brackets AR & GAR Application: A range of Arris Rail Brackets for use with fencing. AR - Arris Rail Brackets Suitable for securing arris rails to a square fence post when building a feather edge fence or to repair a broken wooden arris rail to an existing post. GAR12 ARH - Handed Arris Rail Brackets (Bolt on Type) Suitable for fitting plain unended arris rails to blank posts. FENCING ARM - Mortice Arris Rail Brackets Used for attaching a standard arris rail to a concrete post. GAR - Green Arris Rail Brackets Powder Coated, Green finish. Code AR12 Product Length (mm) Pre Galvanised Mild Steel AR9 Arris Rail Bracket 230 AR12 Arris Rail Bracket 300 ARH Handed Arris Rail Bracket 190 ARM Mortice Arris Rail Bracket 200 ARH Pre Galvanised & Powder Coated Green GAR12 Arris Rail Bracket 300 ARM TECO Fencing Clips FC, GFC & TC Application: A quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry. Features: • Available in two finishes, standard galvanised or galvanised and powder coated green. Code Product FC TC Product Dimensions (mm) Width Pre Galvanised TC32 Trellis Clip 32 TC38 Trellis Clip 38 FC35 Fencing Clip 35 FC38 Fencing Clip 38 FC44 Fencing Clip 44 FC51 Fencing Clip 51 Pre Galvanised & Powder Coated Green GFC44 Fencing Clip - Green 44 GFC51 Fencing Clip - Green 51 GFC To order or find out more call 01273 423 983 or scan the QR code. www.tecoproducts.co.uk 33 TECO Fencing Post Shoes PSC, PSU, FB, FCI, FDT, FEX, FRS & FS Application: A range of fence post supports in both standard and heavy duty. PSC & PSU - 6mm thick, heavy duty spun galvanised. FB - Bolt Down Shoes. FCI - Concrete In Post Shoes for where ground conditions are loose or stony and do not allow the use of a fence spike. FEX - Fence Post Extender. FENCING FRS - Repair Spike are used to repair a damaged or rotten post set into existing concrete. FS - Spiked Post Shoes to hold fence posts above ground level, suitable for standard soil conditions. FB FEX Code FCI Product Post Size FRS Product Dimensions (mm) Shoe Height Support Height Hole Size Heavy Duty Galvanised - 6mm PSC Post Shoe - Cake Stand PSU Post Shoe - U Shoe 75 x 75 up to 150 x 150 60 130 M10 100 x 100 100 115 M10 M10 Galvanised & Powder Coated Brown FB50 Fencing Bolt Down Shoe 50 x 50 150 - FB75 Fencing Bolt Down Shoe 75 x 75 150 - M10 FB100 Fencing Bolt Down Shoe 100 x 100 150 - M10 FCI75 Fencing Concrete In Shoe 75 x 75 150 200 - FCI100 Fencing Concrete In Shoe 100 x 100 150 200 - FDT Fencing Drive Tool min. 75 x 75 - 150 - FEX Fence Post Extender 75 x 75 - 180 M10 FEX100 Fence Post Extender 100 x 100 - 180 M10 FRS75 Fencing Repair Spike 75 x 75 150 300 - FS50X450 Fencing Spike 50 x 50 150 450 - FS75X600 Fencing Spike 75 x 75 150 600 - FS75X700 Fencing Spike 75 x 75 150 700 - FS100X700 Fencing Spike 100 x 100 150 700 - PSC 34 PSU FS FDT www.tecoproducts.co.uk TECO Fence Panel & Post Brackets PSB & PWB Application: PSB - Fence Panel Security Bracket A bracket designed to secure the fence panel securely to the post. PWB - Fence Post Wall Bracket PWB To secure the post to the wall. Features: • Available for 75mm or 100mm posts. FENCING • Holed 6mm at 25mm offset centres. • 2.4mm thick. Code PSB Product Product Dimensions (mm) Width Pre Galvanised - 2.4mm PSB75 Fence Panel Security Bracket 75 PSB100 Fence Panel Security Bracket 100 PWB75 Fence Post Wall Bracket 75 PWB100 Fence Post Wall Bracket 100 TECO Gravel Board Clips & Cleats GBC Application: For connecting gravel boards to fence posts. GBC Cleats GBC Two Pin Gravel Board Cleats designed to attach concrete gravel boards to concrete fence post. GBC Clips Galvanised Gravel Board Clips for fitting gravel boards securely to fence posts. Available for concrete or timber gravel boards. Code Product Product Dimensions (mm) Width Length Hot Dipped Galvanised GBC6 Gravel Board Cleat - 150 GBC12 Extended Gravel Board Cleat - 300 Pre Galvanised - 1.2mm GBC Gravel Board Clip 25 150 GBC50/150 Gravel Board Clip 50 150 GBC50 Gravel Board Clip - with lip for Concrete 50 175 GBC50/225 Gravel Board Clip - with lip for Concrete 50 225 TECO Knee Rail Straps GBC6 KR Application: The TECO Knee Rail Straps are supplied flat or with one bend at 90°. The Knee Rail Strap can then be bent into shape and secured with nails forming a birdsmouth strap on site. Code Product Product Dimensions (mm) Width Length Pre Galvanised Mild Steel KR46 Knee Rail Strap - Flat 46 500 KR46B Knee Rail Strap - Bent 46 250 x 250 KR90 Knee Rail Strap - Flat 90 500 KR90B Knee Rail Strap - Bent 90 250 x 250 www.tecoproducts.co.uk KR 35 TECO Studding STUD Application: A range of metric studding / threaded bar, suitable for many applications. Supplied as standard in Mild Steel, High Tensile available to order. Features: • Available in three finishes, Bright Zinc Plated, Galvanised & Stainless Steel. • Cutting Service available. STUDDING Code Product Product Dimensions Dia. Length (mm) Bright Zinc Plated (BZP) STUDBZPM6 Studding BZP M6 1000 STUDBZPM8 Studding BZP M8 1000 STUDBZPM10 Studding BZP M10 1000 STUDBZPM12 Studding BZP M12 1000 STUDBZPM16 Studding BZP M16 1000 Heavy Duty Hot Dipped Spun Galvanised STUDGM10 Studding Galv M10 1000 STUDGM12 Studding Galv M12 1000 STUDGM16 Studding Galv M16 1000 STUDGM20 Studding Galv M20 1000 STUDGM24 Studding Galv M24 1000 STUDSSM8 Studding Stainless Steel M8 1000 STUDSSM10 Studding Stainless Steel M10 1000 STUDSSM12 Studding Stainless Steel M12 1000 STUDSSM16 Studding Stainless Steel M16 1000 Stainless Steel STUD TECO Stud Connectors SC Application: Stud Connectors for joining studding end to end. Features: • Available in two finishes, Bright Zinc Plated or Galvanised. Code Product Diameter SC Bright Zinc Plated (BZP) SCBZPM6 Stud Connector SCBZPM8 Stud Connector M6 M8 SCBZPM10 Stud Connector M10 SCBZPM12 Stud Connector M12 SCBZPM16 Stud Connector M16 SCGM12 Stud Connector M12 SCGM16 Stud Connector M16 SCGM20 Stud Connector M20 SCGM24 Stud Connector M24 SCGM30 Stud Connector M30 Spun Galvanised 36 www.tecoproducts.co.uk TECO Square Plate Washers WSQP Application: Square Plate Washers available in bright zinc plated, heavy duty hot dipped spun galvanised or stainless steel. Suitable for a variety of applications where a heavy washer is required. Code Product Hole Size Product Dimensions (mm) Size Thickness Bright Zinc Plated (BZP) Sq. Plate Washer BZP M10 50 x 50 3 WSQPBZPM12 Sq. Plate Washer BZP M12 50 x 50 3 WSQPBZPM16 Sq. Plate Washer BZP M16 50 x 50 3 WSQPBZPM20 Sq. Plate Washer BZP M20 50 x 50 3 WSQPGM10X50X3 Sq. Plate Washer Galv M10 50 x 50 3 WSQPGM10X50X5 Sq. Plate Washer Galv M10 50 x 50 5 WSQPGM10X60X5 Sq. Plate Washer Galv M10 60 x 60 5 WSQPGM12X50X3 Sq. Plate Washer Galv M12 50 x 50 3 WSQPGM12X50X5 Sq. Plate Washer Galv M12 50 x 50 5 WSQPGM12X60X5 Sq. Plate Washer Galv M12 60 x 60 5 WSQPGM12X75X5 Sq. Plate Washer Galv M12 75 x 75 5 WSQPGM12X100X6 Sq. Plate Washer Galv M12 100 x 100 6 WSQPGM16X50X3 Sq. Plate Washer Galv M16 50 x 50 3 WSQPGM16X50X5 Sq. Plate Washer Galv M16 50 x 50 5 WSQPGM16X60X5 Sq. Plate Washer Galv M16 60 x 60 5 WSQPGM16X75X5 Sq. Plate Washer Galv M16 75 x 75 5 WSQPGM20X50X3 Sq. Plate Washer Galv M20 50 x 50 3 WSQPGM20X50X5 Sq. Plate Washer Galv M20 50 x 50 5 WSQPGM20X60X5 Sq. Plate Washer Galv M20 60 x 60 5 WSQPGM20X75X5 Sq. Plate Washer Galv M20 75 x 75 5 WSQPGM20X100X6 Sq. Plate Washer Galv M20 100 x 100 6 WSQPGM24X75X5 Sq. Plate Washer Galv M24 75 x 75 5 WSQPGM24X100X6 Sq. Plate Washer Galv M24 100 x 100 6 WSQPSSM10 Sq. Plate Washer Stainless M10 50 x 50 3 WSQPSSM12 Sq. Plate Washer Stainless M12 50 x 50 3 WSQPSSM16 Sq. Plate Washer Stainless M16 50 x 50 3 WASHERS & NUTS WSQPBZPM10 Hot Dipped Galvanised WSQP Stainless Steel TECO Spring & Taper Washers WSPRING & WTAP Application: A Spring Washer is a washer split at one point and bent into a helical shape. This causes the washer to exert a spring force between the fastener's head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation. Taper Washers are used with bolting products on steelwork to provide a flat surface under fastener heads for sloping webs, sections etc. Code Product Product Dimensions (mm) Hole Dia. Size Galvanised WSPRINGGM8 Spring Washer M8 12 WSPRINGGM12 Spring Washer M12 19 WSPRINGGM16 Spring Washer M16 24 WSPRINGGM20 Spring Washer M20 30 WSPRINGGM24 Spring Washer M24 35 WTAPGM10 Taper Washer M10 26 x 26 WTAPGM12 Taper Washer M12 33 x 33 WTAPGM20 Taper Washer M20 45 x 45 www.tecoproducts.co.uk WSPRING WTAP 37 TECO Heavy Round Washers WRD,WSTD & WP Application: A full range of washers of varying thicknesses, diameters and finishes suitable for many applications. WP - Penny Washers Light Duty Bright Zinc Plated Washers. Minimum diameter 30mm, 1.5mm thick. WSTD WSTD - Standard Round Washers Available M6 in Bright Zinc Plated, all other sizes Galvanised or Stainless Steel. WASHERS & NUTS WRD - Heavy Round Washers Large diameter washers for heavy applications. Code Product Hole Size WP Product Dimensions (mm) Dia. Thickness WRDG Heavy Duty Hot Dipped Galvanised Code Product Hole Size Product Dimensions (mm) Dia. Thickness WRDGM8X36X3 Round Washer M8 36 3 WRDGM10X36X3 Round Washer M10 36 3 WRDGM10X50X3 Round Washer M10 50 3 Bright Zinc Plated (BZP) WRDGM10X50X5 Round Washer M10 50 5 WPM6 Penny Washer M6 ≥30 WRDGM10X60X5 Round Washer M10 60 5 WPM8 Penny Washer M8 ≥30 ≥1 WRDGM12X36X3 Round Washer M12 36 3 WPM10 Penny Washer M10 ≥30 ≥1 WRDGM12X50X3 Round Washer M12 50 3 WPM12 Penny Washer M12 ≥30 ≥1 WRDGM12X50X5 Round Washer M12 50 5 WRDGM12X60X5 Round Washer M12 60 5 WRDGM12X75X5 Round Washer M12 75 5 WRDGM16X36X3 Round Washer M16 36 3 WRDGM16X50X3 Round Washer M16 50 3 WRDGM16X50X5 Round Washer M16 50 5 WRDGM16X50X10 Round Washer M16 50 10 WRDGM16X60X5 Round Washer M16 60 5 WRDGM16X75X5 Round Washer M16 75 5 WSTDGM8 Code Product Hole Size ≥1 Product Dimensions (mm) Dia. Thickness Bright Zinc Plated (BZP) WSTDBZPM6 Standard Washer M6 12 1.5 Standard Washer M8 16 2 M10 20 2.3 2.5 Heavy Duty Galvanised WRDGM16X75X10 Round Washer M16 75 10 WSTDGM10 Standard Washer WRDGM20X50X3 M20 50 3 WSTDGM12 Standard Washer M12 24 5 WSTDGM16 Standard Washer M16 30 3 M20 37 3.5 M24 44 4.5 WRDGM20X50X5 Round Washer Round Washer M20 50 WRDGM20X50X10 Round Washer M20 50 10 WSTDGM20 Standard Washer WRDGM20X60X5 M20 60 5 WSTDGM24 Standard Washer Round Washer Round Washer M20 75 5 Stainless Steel WRDGM20X75X10 Round Washer M20 75 10 WSTDSSM8 Standard Washer M8 17 1 WRDGM24X50X10 Round Washer M24 50 10 WSTDSSM10 Standard Washer M10 20 1 WRDGM24X75X5 Round Washer M24 75 5 WSTDSSM12 Standard Washer M12 24 2 WRDGM24X75X10 Round Washer M24 75 10 WSTDSSM16 Standard Washer M16 30 2 WRDGM20X75X5 TECO Nuts NUT Application: NUT A range of Bright Zinc Plated, Galvanised and Stainless Steel Nuts for use with Bolts and Studding. Code Product Size Product Size Hot Dipped Spun Galvanised Bright Zinc Plated (BZP) 38 Code NUTFBZPM6 Hex Full Nut M6 NUTFGM12 Hex Full Nut M12 NUTFBZPM8 Hex Full Nut M8 NUTFGM16 Hex Full Nut M16 NUTFBZPM10 Hex Full Nut M10 NUTFGM20 Hex Full Nut M20 NUTFBZPM12 Hex Full Nut M12 Stainless Steel NUTFBZPM16 Hex Full Nut M16 NUTFSSM10 Hex Full Nut M10 NUTFBZPM20 Hex Full Nut M20 NUTFSSM12 Hex Full Nut M12 www.tecoproducts.co.uk TECO Galvanised Nails Application: Square Twist Nails - Ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire nail. Available in two lengths, 30mm and 40mm. Round Wire Nails - Suitable for general joinery applications. Available in a variety of lengths and pack sizes. Code Product Product Dimensions (mm) Dia. Length Pack Qty. Galvanised Sq. Twist Nails 3.75 30 500g Bag NKG30X3.75 Sq. Twist Nails 3.75 30 1Kg Bag NKG40X3.75 Sq. Twist Nails 3.75 40 1Kg Bag NBOX30X3.75 Sq. Twist Nails 3.75 30 25Kg Box NBOX40X3.75 Sq. Twist Nails 3.75 40 25Kg Box NKG75X3.75 Rd. Wire Nails 3.75 75 1Kg Bag NKG90X4 Rd. Wire Nails 4 90 1Kg Bag NKG100X4.5 Rd. Wire Nails 4.5 100 1Kg Bag NBOX75X3.75 Rd. Wire Nails 3.75 75 25Kg Box NBOX90X4 Rd. Wire Nails 4 90 25Kg Box NBOX100X4.5 Rd. Wire Nails 4.5 100 25Kg Box TECO Annular Ring Shank Nails NAILS N5GSTG30 N NSS Application: Stainless Steel Annular Ring Shank Nails for use with stainless steel products or for hardwood or external applications. Code Product Product Dimensions (mm) Dia. Length Stainless Steel NSS30X3.75 Annular Ring Shank 3.75 30 NSS50X3.35 Annular Ring Shank 3.35 50 NSS75X3.35 Annular Ring Shank 3.35 75 TECO Suretwist NSS STW Application: The Suretwist Nail is a hammer driven fixing for securing composite panels to wooden battens. Features: • Quick installation, no need for drilling or screws. Unique one piece to prevent bending during installation with a large 20mm diameter head. High performance with minimal compression of insulation and improved thermal bridging. Approved by the major insulation suppliers. Code Product Product Dimensions (mm) Dia. Length Rec. Tensile Load (kN) Maximum Fixture Thickness Pack Qty. Zinc Plated STW135 Suretwist 8 135 0.22 100 Loose STW135/25 Suretwist 8 135 0.22 100 Bag of 25 STW165 Suretwist 8 165 0.22 130 Loose STW165/25 Suretwist 8 165 0.22 130 Bag of 25 STW195 Suretwist 8 195 0.22 160 Loose STW195/25 Suretwist 8 195 0.22 160 Bag of 25 STW220 Suretwist 8 220 0.22 185 Loose STW220/25 Suretwist 8 220 0.22 185 Bag of 25 www.tecoproducts.co.uk STW 39 TECO CSK Socket Screws CSKSG Application: A Heavy Duty Galvanised Socket Countersunk Screw to give a high tensile grade 10.9 flush finish. Supplied complete with a galvanised hexagon full nut. Code Product Product Dimensions (mm) Dia. Length Hot Dipped Spun Galvanised BOLTS CSKSGM8X25 CSKSGM8X30 CSKSGM8X35 CSKSGM8X40 CSKSGM8X45 CSKSGM8X50 CSKSGM10X25 CSKSGM10X30 CSKSGM10X35 CSKSGM10X40 CSKSGM10X45 CSKSGM10X50 CSKSGM10X55 CSKSGM10X60 CSKSGM12X25 CSKSGM12X30 CSKSGM12X35 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 25 30 35 40 45 50 25 30 35 40 45 50 55 60 25 30 35 XOX & SET8.8 Application: Hexagon Headed Bolts for a variety of applications. Features: • Available in Bright Zinc Plated or Spun Galvanised. • Galvanised bolts from M8 to M24. • Stainless Steel bolts are available to order. • All bolts are supplied complete with a suitable nut. Product Product Dimensions (mm) Dia. Grade Length Bright Zinc Plated (BZP) XOXBZPM12X100 Hex Head Bolt M12 100 XOXBZPM12X130 Hex Head Bolt M12 130 XOXBZPM12X150 Hex Head Bolt M12 150 XOXBZPM12X180 Hex Head Bolt M12 180 Hot Dipped Spun Galvanised, fully threaded, Grade 8.8 SET8.8GM8X20 Set Screw M8 20 SET8.8GM8X25 Set Screw M8 25 SET8.8GM8X30 Set Screw M8 30 SET8.8GM8X35 Set Screw M8 35 SET8.8GM8X40 Set Screw M8 40 SET8.8GM8X45 Set Screw M8 45 SET8.8GM8X50 Set Screw M8 50 SET8.8GM8X55 Set Screw M8 55 SET8.8GM8X60 Set Screw M8 60 SET8.8GM8X65 Set Screw M8 65 SET8.8GM10X20 Set Screw M10 20 SET8.8GM10X25 Set Screw M10 25 SET8.8GM10X30 Set Screw M10 30 40 Product Product Dimensions (mm) Dia. Length Hot Dipped Spun Galvanised CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket TECO Hex Head Bolts Code Code 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 CSKSGM12X40 CSKSGM12X45 CSKSGM12X50 CSKSGM12X55 CSKSGM12X60 CSKSGM16X30 CSKSGM16X35 CSKSGM16X40 CSKSGM16X45 CSKSGM16X50 CSKSGM16X55 CSKSGM16X60 CSKSGM20X40 CSKSGM20X45 CSKSGM20X50 CSKSGM20X55 CSKSGM20X60 CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket CSK Socket Code Product SET8.8GM10X35 SET8.8GM10X40 SET8.8GM10X45 SET8.8GM10X50 SET8.8GM10X55 SET8.8GM10X60 SET8.8GM10X65 SET8.8GM10X75 SET8.8GM10X80 SET8.8GM12X20 SET8.8GM12X25 SET8.8GM12X30 SET8.8GM12X35 SET8.8GM12X40 SET8.8GM12X45 SET8.8GM12X50 SET8.8GM12X55 SET8.8GM12X60 SET8.8GM12X70 SET8.8GM12X75 SET8.8GM12X80 SET8.8GM16X25 SET8.8GM16X30 SET8.8GM16X35 SET8.8GM16X40 SET8.8GM16X45 SET8.8GM16X50 SET8.8GM16X55 SET8.8GM16X60 SET8.8GM16X70 SET8.8GM16X75 SET8.8GM16X80 Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw Set Screw M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 40 45 50 55 60 30 35 40 45 50 55 60 40 45 50 55 60 Product Dimensions (mm) Dia. Length M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 35 40 45 50 55 60 65 75 80 20 25 30 35 40 45 50 55 60 70 75 80 25 30 35 40 45 50 55 60 70 75 80 Grade 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 www.tecoproducts.co.uk Code Product Product Dimensions (mm) Dia. Code Product 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 XOXGM12X300 XOXGM16X65 XOXGM16X70 XOXGM16X75 XOXGM16X80 XOXGM16X90 XOXGM16X100 XOXGM16X110 XOXGM16X120 XOXGM16X130 XOXGM16X140 XOXGM16X150 XOXGM16X160 XOXGM16X170 XOXGM16X180 XOXGM16X190 XOXGM16X200 XOXGM16X220 XOXGM16X240 XOXGM16X260 XOXGM16X280 XOXGM16X300 XOXGM20X65 XOXGM20X70 XOXGM20X75 XOXGM20X80 XOXGM20X90 XOXGM20X100 XOXGM20X110 XOXGM20X120 XOXGM20X130 XOXGM20X140 XOXGM20X150 XOXGM20X160 XOXGM20X170 XOXGM20X180 XOXGM20X190 XOXGM20X200 XOXGM20X220 XOXGM20X240 XOXGM20X260 XOXGM20X280 XOXGM20X300 XOXGM24X65 XOXGM24X70 XOXGM24X75 XOXGM24X80 XOXGM24X90 XOXGM24X100 XOXGM24X110 XOXGM24X120 XOXGM24X130 XOXGM24X140 XOXGM24X150 XOXGM24X160 XOXGM24X170 XOXGM24X180 XOXGM24X190 XOXGM24X200 XOXGM24X220 XOXGM24X240 XOXGM24X260 XOXGM24X280 XOXGM24X300 Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Hex Head Bolt Product Dimensions (mm) Grade Dia. Length M12 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 300 65 70 75 80 90 100 110 120 130 140 150 160 170 180 190 200 220 240 260 280 300 65 70 75 80 90 100 110 120 130 140 150 160 170 180 190 200 220 240 260 280 300 65 70 75 80 90 100 110 120 130 140 150 160 170 180 190 200 220 240 260 280 300 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 BOLTS SET8.8GM20X30 Set Screw M20 30 SET8.8GM20X40 Set Screw M20 40 SET8.8GM20X45 Set Screw M20 45 SET8.8GM20X50 Set Screw M20 50 SET8.8GM20X55 Set Screw M20 55 SET8.8GM20X60 Set Screw M20 60 SET8.8GM20X70 Set Screw M20 70 SET8.8GM20X75 Set Screw M20 75 SET8.8GM20X80 Set Screw M20 80 SET8.8GM24X50 Set Screw M24 50 SET8.8GM24X55 Set Screw M24 55 SET8.8GM24X60 Set Screw M24 60 Heavy Duty Hot Dipped Spun Galvanised minimum Grade 4.6 XOXGM8X65 Hex Head Bolt M8 65 XOXGM8X70 Hex Head Bolt M8 70 XOXGM8X75 Hex Head Bolt M8 75 XOXGM8X80 Hex Head Bolt M8 80 XOXGM8X90 Hex Head Bolt M8 90 XOXGM8X100 Hex Head Bolt M8 100 XOXGM8X110 Hex Head Bolt M8 110 XOXGM8X120 Hex Head Bolt M8 120 XOXGM8X130 Hex Head Bolt M8 130 XOXGM8X140 Hex Head Bolt M8 140 XOXGM8X150 Hex Head Bolt M8 150 XOXGM10X65 Hex Head Bolt M10 65 XOXGM10X70 Hex Head Bolt M10 70 XOXGM10X75 Hex Head Bolt M10 75 XOXGM10X80 Hex Head Bolt M10 80 XOXGM10X90 Hex Head Bolt M10 90 XOXGM10X100 Hex Head Bolt M10 100 XOXGM10X110 Hex Head Bolt M10 110 XOXGM10X120 Hex Head Bolt M10 120 XOXGM10X130 Hex Head Bolt M10 130 XOXGM10X140 Hex Head Bolt M10 140 XOXGM10X150 Hex Head Bolt M10 150 XOXGM10X160 Hex Head Bolt M10 160 XOXGM10X170 Hex Head Bolt M10 170 XOXGM10X180 Hex Head Bolt M10 180 XOXGM10X190 Hex Head Bolt M10 190 XOXGM10X200 Hex Head Bolt M10 200 XOXGM10X220 Hex Head Bolt M10 220 XOXGM10X240 Hex Head Bolt M10 240 XOXGM10X260 Hex Head Bolt M10 260 XOXGM10X280 Hex Head Bolt M10 280 XOXGM10X300 Hex Head Bolt M10 300 XOXGM12X65 Hex Head Bolt M12 65 XOXGM12X70 Hex Head Bolt M12 70 XOXGM12X75 Hex Head Bolt M12 75 XOXGM12X80 Hex Head Bolt M12 80 XOXGM12X90 Hex Head Bolt M12 90 XOXGM12X100 Hex Head Bolt M12 100 XOXGM12X110 Hex Head Bolt M12 110 XOXGM12X120 Hex Head Bolt M12 120 XOXGM12X130 Hex Head Bolt M12 130 XOXGM12X140 Hex Head Bolt M12 140 XOXGM12X150 Hex Head Bolt M12 150 XOXGM12X160 Hex Head Bolt M12 160 XOXGM12X170 Hex Head Bolt M12 170 XOXGM12X180 Hex Head Bolt M12 180 XOXGM12X190 Hex Head Bolt M12 190 XOXGM12X200 Hex Head Bolt M12 200 XOXGM12X220 Hex Head Bolt M12 220 XOXGM12X240 Hex Head Bolt M12 240 XOXGM12X260 Hex Head Bolt M12 260 XOXGM12X280 Hex Head Bolt M12 280 www.tecoproducts.co.uk Grade Length 41 TECO Coach Bolts CSH Application: Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. CSH Features: • Supplied complete with a hexagon full nut to suit. • Available in Bright Zinc Plated, Galvanised and Stainless Steel to order. BOLTS Code Product Product Dimensions (mm) Dia. Length Bright Zinc Plated 42 CSHBZPM6X25 CSHBZPM6X40 CSHBZPM6X50 CSHBZPM6X65 CSHBZPM6X75 CSHBZPM6X100 CSHBZPM8X40 CSHBZPM8X50 CSHBZPM8X65 CSHBZPM8X75 CSHBZPM8X100 CSHBZPM8X110 CSHBZPM8X130 CSHBZPM8X150 CSHBZPM10X65 CSHBZPM10X75 CSHBZPM10X100 CSHBZPM10X110 CSHBZPM10X130 CSHBZPM10X150 CSHBZPM10X180 CSHBZPM10X200 CSHBZPM10X220 CSHBZPM10X240 CSHBZPM12X75 CSHBZPM12X100 CSHBZPM12X110 CSHBZPM12X130 CSHBZPM12X150 CSHBZPM12X180 CSHBZPM12X200 CSHBZPM12X220 CSHBZPM12X240 CSHBZPM12X260 CSHBZPM12X280 Galvanised Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 25 40 50 65 75 100 40 50 65 75 100 110 130 150 65 75 100 110 130 150 180 200 220 240 75 100 110 130 150 180 200 220 240 260 280 CSHGM8X25 CSHGM8X30 CSHGM8X35 CSHGM8X40 CSHGM8X45 CSHGM8X50 CSHGM8X55 CSHGM8X60 CSHGM8X65 CSHGM8X70 CSHGM8X75 CSHGM8X80 CSHGM8X90 CSHGM8X100 CSHGM8X110 CSHGM8X130 CSHGM8X140 CSHGM8X150 CSHGM8X160 Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 25 30 35 40 45 50 55 60 65 70 75 80 90 100 110 130 140 150 160 Code CSHGM8X180 CSHGM8X200 CSHGM10X25 CSHGM10X30 CSHGM10X35 CSHGM10X40 CSHGM10X45 CSHGM10X50 CSHGM10X55 CSHGM10X60 CSHGM10X65 CSHGM10X70 CSHGM10X75 CSHGM10X80 CSHGM10X90 CSHGM10X100 CSHGM10X110 CSHGM10X120 CSHGM10X130 CSHGM10X140 CSHGM10X150 CSHGM10X160 CSHGM10X180 CSHGM10X200 CSHGM10X220 CSHGM10X230 CSHGM10X240 CSHGM10X260 CSHGM10X280 CSHGM10X300 CSHGM12X30 CSHGM12X40 CSHGM12X45 CSHGM12X50 CSHGM12X55 CSHGM12X60 CSHGM12X65 CSHGM12X70 CSHGM12X75 CSHGM12X80 CSHGM12X90 CSHGM12X100 CSHGM12X110 CSHGM12X120 CSHGM12X130 CSHGM12X140 CSHGM12X150 CSHGM12X160 CSHGM12X180 CSHGM12X200 CSHGM12X220 CSHGM12X230 CSHGM12X240 CSHGM12X260 CSHGM12X280 CSHGM12X300 Product Product Dimensions (mm) Dia. Length Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt Coach Bolt M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 180 200 25 30 35 40 45 50 55 60 65 70 75 80 90 100 110 120 130 140 150 160 180 200 220 230 240 260 280 300 30 40 45 50 55 60 65 70 75 80 90 100 110 120 130 140 150 160 180 200 220 230 240 260 280 300 www.tecoproducts.co.uk TECO Self Tapping Anchors JAB, TB & CS Application: A range of Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Features: • Concrete screws are sold with a T30 drive bit in each pack and a white cover cap. • Thunderbolts have three head types; Countersunk, Flanged or Hexagon. Product Drill Screw Min Hole Max Fixture Rec.Tensile Rec.Shear Dia. (mm) Length (mm) Depth (mm) Thickness (mm) Resistance (kN) Resistance (kN) CS SCREWS Code Zinc Plated and Yellow Passivated CS100/4 Concrete Screw 6 100 45 60 2.0 CS120/4 Concrete Screw 6 120 45 80 2.0 2.5 CS150/4 Concrete Screw 6 150 45 110 2.0 2.5 Code Product 2.5 Drill Dia. (mm) Anchor Length (mm) Max Fixture Dia. (mm) Min Hole Depth (mm) Driver Type 30 ~ 55 15mm A/F Zinc Plated and Clear Passivated JAB JAB08030 Anker Bolt - Hex Head 8 JAB08075 Anker Bolt - Hex Head 8 75 35 55 15mm A/F JAB08100 Anker Bolt - Hex Head 8 100 60 55 15mm A/F JAB10100 Anker Bolt - Hex Head 10 100 50 70 17mm A/F JAB10150 Anker Bolt - Hex Head 10 150 100 70 17mm A/F JAB12075 Anker Bolt - Hex Head 12 75 15 85 19mm A/F JAB12100 Anker Bolt - Hex Head 12 100 40 85 19mm A/F JAB12150 Anker Bolt - Hex Head 12 150 90 85 19mm A/F Code Product Length (mm) Drill Diameter (mm) Hole Depth Embedment (mm) Max Fixture Thickness (mm) Clearance Hole (Fixture) Driver Type TBFLANGE Zinc Plated and Yellow Passivated TB05X75CSK Thunderbolt CSK Head 75 5 10 50 7 T25 Torx Bit TB06X50CSK Thunderbolt CSK Head 50 6 10 20 8 T30 Torx Bit TB06X75CSK Thunderbolt CSK Head 75 6 10 45 8 T30 Torx Bit TB06X100CSK Thunderbolt CSK Head 100 6 10 55 8 T30 Torx Bit TB05X50FLANGE Thunderbolt Flange Head 50 5 10 25 7 10mm A/F TB06X50FLANGE Thunderbolt Flange Head 50 6 10 20 8 10mm A/F TB06X75FLANGE Thunderbolt Flange Head 75 6 10 45 8 10mm A/F TB06X100FLANGE Thunderbolt Flange Head 100 6 10 55 8 10mm A/F TB08X60HEX Thunderbolt Hex Head 60 8 15 20 10 15mm A/F TB08X75HEX Thunderbolt Hex Head 75 8 15 35 10 15mm A/F TB08X100HEX Thunderbolt Hex Head 100 8 15 60 10 15mm A/F TB08X150HEX Thunderbolt Hex Head 150 8 15 110 10 15mm A/F TB10X60HEX Thunderbolt Hex Head 60 10 20 10 12 17mm A/F TB10X75HEX Thunderbolt Hex Head 75 10 20 25 12 17mm A/F TB10X100HEX Thunderbolt Hex Head 100 10 20 50 12 17mm A/F TB10X150HEX Thunderbolt Hex Head 150 10 20 100 12 17mm A/F TB12X100HEX Thunderbolt Hex Head 100 12 25 40 14 19mm A/F TB12X150HEX Thunderbolt Hex Head 150 12 25 90 14 19mm A/F www.tecoproducts.co.uk TBCSK TBHEX 43 TECO Coach Screws CS Application: Coach Screws have a course single thread allowing more bite than a standard screw. Used for connecting steel to timber and timber to timber where access on the reverse side is restricted. Features: • Hexagonal Headed Bright Zinc Plated or Hot Dipped Spun Galvanised (Galvanised Coach Screws may be supplied Imperial Square Head or Metric Hex Head, please contact us for details). SCREWS • Stainless Steel available to order. Code Product Product Dimensions (mm) Dia. Length Bright Zinc Plated (BZP) CSBZPM8X35 Coach Screw BZP M8 35 CSBZPM8X50 Coach Screw BZP M8 50 CSBZPM8X75 Coach Screw BZP M8 75 CSBZPM8X100 Coach Screw BZP M8 100 CSBZPM10X50 Coach Screw BZP M10 50 CSBZPM10X65 Coach Screw BZP M10 65 CSBZPM10X75 Coach Screw BZP M10 75 CSBZPM10X100 Coach Screw BZP M10 100 CSBZPM10X120 Coach Screw BZP M10 120 CSBZPM10X130 Coach Screw BZP M10 130 CSBZPM10X150 Coach Screw BZP M10 150 CSBZPM10X200 Coach Screw BZP M10 200 CSBZPM12X75 Coach Screw BZP M12 75 CSBZPM12X100 Coach Screw BZP M12 100 CSBZPM12X120 Coach Screw BZP M12 120 CSBZPM12X130 Coach Screw BZP M12 130 CSBZPM12X150 Coach Screw BZP M12 150 Code Product Galvanised CSG3/8X4 Coach Screw M10 100 CSG1/4X11/2 Coach Screw M6 40 CSG3/8X41/2 Coach Screw M10 110 CSG1/4X2 Coach Screw M6 50 CSG3/8X5 Coach Screw M10 120 CSG1/4X21/4 Coach Screw M6 55 CSG3/8X6 Coach Screw M10 150 CSG1/4X21/2 Coach Screw M6 65 CSG1/2X11/2 Coach Screw M12 40 CSG1/4X3 Coach Screw M6 75 CSG1/2X2 Coach Screw M12 50 CSG1/4X31/2 Coach Screw M6 90 CSG1/2X21/4 Coach Screw M12 55 CSG1/4X4 Coach Screw M6 100 CSG1/2X21/2 Coach Screw M12 65 CSG1/4X5 Coach Screw M6 120 CSG1/2X3 Coach Screw M12 75 40 CSG1/2X31/2 Coach Screw M12 90 Coach Screw M12 100 CSG5/16X11/2 Coach Screw M8 Product Dimensions (mm) Dia. Length CSG5/16X13/4 Coach Screw M8 45 CSG1/2X4 CSG5/16X2 Coach Screw M8 50 CSG1/2X5 Coach Screw M12 120 CSG5/16X21/2 Coach Screw M8 65 CSG1/2X6 Coach Screw M12 150 CSG5/16X3 Coach Screw M8 75 CSG1/2X8 Coach Screw M12 200 CSG5/16X31/2 Coach Screw M8 90 CSG5/8X3 Coach Screw M16 75 CSG5/16X4 Coach Screw M8 100 CSG5/8X4 Coach Screw M16 100 CSG5/16X41/2 Coach Screw M8 110 CSG5/8X5 Coach Screw M16 120 CSG5/16X5 Coach Screw M8 120 CSG5/8X6 Coach Screw M16 150 150 CSG5/8X8 Coach Screw M16 200 Coach Screw M16 250 CSG5/16X6 44 CS Coach Screw M8 CSG3/8X1 Coach Screw M10 25 CSG5/8X10 CSG3/8X11/4 Coach Screw M10 30 CSG3/4X3 Coach Screw M20 75 CSG3/8X11/2 Coach Screw M10 40 CSG3/4X4 Coach Screw M20 100 CSG3/8X2 Coach Screw M10 50 CSG3/4X5 Coach Screw M20 120 CSG3/8X21/2 Coach Screw M10 65 CSG3/4X6 Coach Screw M20 150 CSG3/8X3 Coach Screw M10 75 CSG3/4X8 Coach Screw M20 200 CSG3/8X31/2 Coach Screw M10 90 CSG3/4X10 Coach Screw M20 250 www.tecoproducts.co.uk TECO Timber Drive Screws TDS Application: A heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. Features: • Heat treated shank for extra strength. • Green organic coating. • Each pack comes complete with driver. Code Product Pack Quantity SCREWS Product Dimensions (mm) Dia. Length Green Organic Coating TDS75 Timber Drive Screw 7 75 25 TDS100 Timber Drive Screw 7 100 25 TDS150 Timber Drive Screw 7 150 25 TDS200 Timber Drive Screw 7 200 10 TDS250 Timber Drive Screw 7 250 10 TDS100/100 Timber Drive Screw 7 100 100 TDS150/100 Timber Drive Screw 7 150 100 TDS200/100 Timber Drive Screw 7 200 100 TECO Deck Screws TDS DS Application: Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. Code Product Product Dimensions (mm) Dia. Length Pack Details Green Organic Coating DS8X2/200 Deck Screws 4 50 DS8X2/500 Deck Screws 4 50 Box of 200 Tub of 500 DS8X2.1/2/150 Deck Screws 4 65 Box of 150 DS8X2.1/2/350 Deck Screws 4 65 Tub of 350 DS10X3/100 Deck Screws 5 75 Box of 100 DS10X3/200 Deck Screws 5 75 Tub of 200 TECO Stainless Steel Woodscrews DS WSS Application: Stainless Steel Woodscrews ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Code Product Product Dimensions (mm) Dia. Length Stainless Steel WSS4X20 Wood Screw 4 20 WSS4X30 Wood Screw 4 30 WSS4X40 Wood Screw 4 40 WSS4X70 Wood Screw 4 70 WSS5X70 Wood Screw 5 70 WSS5X100 Wood Screw 5 100 WSS3IDM6 Washer M6 18mm Dia. www.tecoproducts.co.uk WSS 45 TECO Timber Master TMF Application: Timber Master is a heavy duty fixing for both timber to timber and component to timber applications. It has been specifically designed for ease of use and speed of application when used with a power tool. Features: • Torx Drive for ease of use and speed with power drills, self countersinking, heat treated shank ensures maximum strength. Code Product Product Dimensions (mm) Dia. Length Head Type SCREWS Zinc Plated and Yellow Passivated TMF08140 Timber Master 8 140 Flanged Head TMF08180 Timber Master 8 180 Flanged Head TMF08220 Timber Master 8 220 Flanged Head TMF08300 Timber Master 8 300 Flanged Head TMF10140 Timber Master 10 140 Flanged Head TMF10180 Timber Master 10 180 Flanged Head TMF10220 Timber Master 10 220 Flanged Head TMF10300 Timber Master 10 300 Flanged Head TECO Drywall Screws TMF DWS Application: High quality screws designed for fixing plasterboard. Code Product Product Dimensions (mm) Dia. Length DWS Black Phosphate Finish DWS25 Dry Wall Screws 3.5 25 DWS32 Dry Wall Screws 3.5 32 DWS38 Dry Wall Screws 3.5 38 DWS42 Dry Wall Screws 3.5 42 DWS50 Dry Wall Screws 3.5 50 DWS60 Dry Wall Screws 3.5 60 DWS75 Dry Wall Screws 4.2 75 DWS100 Dry Wall Screws 4.8 100 TECO Self Drilling Screws MFH & WFH Application: Self Drilling Screws for fixing to steel. MFH - Metalfix for Steel to Steel applications. Hexagon Head. WFH - Woodfix for Timber to Steel applications. Countersunk Head, Phillips No.3 Drive. Code Product Product Dimensions (mm) Thread Dia. Length Point Type (mm) Steel Thickness (mm) Max.Fixture Thickness (mm) 4 5 5 5 5 5 5 5 5 3.0-6.0 4.0-12.5 4.0-12.5 4.0-12.5 4.0-12.5 4.0-12.5 4.0-12.5 4.0-12.5 4.0-12.5 5 5 13 23 33 43 53 70 90 Code Product Zinc Plated MFH55022 MFH55032 MFH55040 MFH55050 MFH55060 MFH55070 MFH55080 MFH550100 MFH550120 46 Metalfix Metalfix Metalfix Metalfix Metalfix Metalfix Metalfix Metalfix Metalfix 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 22 32 40 50 60 70 80 100 120 MFH WFH Product Dimensions (mm) Thread Dia. Length Point Type (mm) Steel Thickness (mm) Max.Fixture Thickness (mm) Zinc Plated WFH55040 Woodfix 5.5 40 3 1.2-3.0 22 WFH55050 Woodfix 5.5 50 5 4.0-12.5 23 WFH55060 Woodfix 5.5 60 5 4.0-12.5 33 WFH55070 Woodfix 5.5 70 5 4.0-12.5 43 WFH55085 Woodfix 5.5 85 5 4.0-12.5 58 WFH55110 Woodfix 5.5 109 5 4.0-12.5 82 WFH55120 Woodfix 5.5 120 5 4.0-12.5 92 www.tecoproducts.co.uk TECO Damp Proof Membrane DPM Application: Intended for use within solid concrete floors to prevent the rise of moisture or damp through structure flooring. Suitable for most construction damp proofing requirements. The DPM can be used as either below the slab application, directly below the flooring surface or in a sandwich construction, between base concrete and the screed. Not recommended for use as a general gas proof barrier system on Brownfield sites or in applications where gases such as radon are present. Manufactured from recycled polythene to meet PIFA and BBA standards. Product Product Dimensions (m) Width Length Thickness BUILDERS PLASTICS Code DPM Colour: Black DPM300B DPM 4 25 1200 Gauge/ 300 Micron TECO Damp Proof Course DPC Application: Provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Code Product Product Dimensions Width (mm) Length(m) Produced to BS 6515:84, 500mu DPC100/500 D.P.C 100 30 DPC112/500 D.P.C 112 30 DPC150/500 D.P.C 150 30 DPC225/500 D.P.C 225 30 DPC300/500 D.P.C 300 30 DPC337/500 D.P.C 337 30 DPC450/500 D.P.C 450 30 DPC600/500 D.P.C 600 30 TECO Rubble Sacks DPC SACKRUBB Application: Polythene Rubble Sacks provide a strong bag suitable for carrying most construction and building waste. The Polythene Rubble Sacks are made from 100% recycled polythene in a thick construction which makes them tear resistant and reusable. Code Product Size (mm) Thickness (Microns) SACKRUBB Rubble Sack 535 x 820 79 TECO Temporary Polythene Sheet SACKRUBB TPS TPS Application: An Eco Light Duty versatile multi purpose polythene sheet intended for a wide range of applications from protecting flooring and equipment through to temporary repairs. Made from recycled polythene, all sheets are waterproof and tear resistant and provide an excellent protective barrier within building environments. Code Product TPS/LD Temporary Polythene Sheet www.tecoproducts.co.uk Product Dimensions (m) Width Length 4 25 47 TECO Gallows Brackets GB Application: Gallows Brackets provide support when removing an internal chimney breast. Supplied in pairs. Code Product Size (mm) MISCELLANEOUS Painted - Red or Grey Primer GB375 Gallows Brackets 375 x 375 GB490 Gallows Brackets 490 x 375 GB TECO Herringbone Joist Struts HB Application: Herringbone Joist Struts provide the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Code Product Joist Centres Strut Length (mm) Pre Galvanised - 1mm HB400 Herringbone Joist Strut 400 480 HB450 Herringbone Joist Strut 450 523 HB600 Herringbone Joist Strut 600 680 HB Stainless Steel - 1mm HBSS400 Herringbone Joist Strut 400 480 HBSS450 Herringbone Joist Strut 450 523 HBSS600 Herringbone Joist Strut 600 680 TECO Hip Irons HI Application: Scrolled Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. Stainless Steel Hip Irons are available for a superior corrosion resistance. Code Product HI Product Dimensions (mm) Size Thickness Heavy Duty Hot Dipped Spun Galvanised HI200/3 Hip Iron 200 3 HI240 Hip Iron 240 3 HI300/3 Hip Iron 300 3 HI300/4 Hip Iron 300 4 HI300 Hip Iron 300 5 Hip Iron 300 4 Stainless Steel HISS300 TECO Z Clips ZC Application: The TECO Z Clip is used for fixing I-Joists or solid timber as noggings. Interlocking top flange to prevent overlap. Available in 3 depths (35, 38, 45mm). Code Product Clip Depth (mm) Pre Galvanised Mild Steel 48 ZC35 Z Clip 35 ZC38 Z Clip 38 ZC45 Z Clip 45 ZC www.tecoproducts.co.uk TECO Plugs P8X50 P Application: A full range of plugs. P & PNP Standard Plastic and Nylon Wall Plugs which include sizes for M8 to M12 Coach Screws, P8X50 P Universal plugs suitable for soft blocks and two types of plug fixings as detailed below. MISCELLANEOUS PNNP - Nylon Nail Plug A mushroom head, nylon expansion plug which gives a flush finish with no metal parts. PPP - Push Plug A mushroom head push in fixing with no expansion forces. Grips the hole with flexible wings. Code Product Anchor Hole Size (mm) Length (mm) Wood Screw Size (mm) Max.Fixture Min.Hole Thickness (mm) Depth (mm) Head Dia. Resistance in any (mm) direction (kN) Standard Plastic Plugs PY Ankerit Yellow Plug 5 22 2.5 to 5 - 30 - PR Ankerit Red Plug 6 34 3.5 to 5 - 40 - - PB Ankerit Brown Plug 7 37 5 to 6 - 45 - - - PNNP Nylon Wall Plugs - Suitable for Solid Base Materials P8X40 Wall Plug 8 40 5 to 6 45 - - PNP12 Plug 12 60 8 to 10 70 - - PNP14 Plug 14 70 10 to 12 80 - - 55 - - Universal Plug - Suitable for Hollow or Solid Base Materials P8X50 Nylon Universal Plug 8 41 4.5 to 6 Nylon Nail and Push Plugs PNNP Nylon Nail Plug 6 40 - 7 50 13 0.1 PPP Push Plug 6 35 - 5 45 13 0.04 PNP RESINPS TECO Resin RESINPS Application: Polyester Styrene Free Resin designed to aid and add strength when using anchors or fixings, threaded stud installation, internal threaded sockets and rebar. Suitable for use in brickwork, most natural stone & concrete. 300ml tubes supplied with mixer nozzle. Thread diameter (mm) Hole Size (mm) Embedment Depth (mm) Centre Edge Distance Spacing (mm) (mm) Structure Thickness (mm) Rec.Tensile Resistance (kN) Rec.Shear Resistance (kN) M8 10 80 145 M10 12 90 160 M12 14 110 M16 18 125 Rec.Tightening Torque (Nm) 80 120 6.8 5.1 7 90 135 9.9 8.0 11 200 110 165 15.0 12.0 25 220 125 190 17.1 22.3 50 M20 22 170 300 170 250 25.2 34.9 115 M24 26 210 380 210 310 50.8 50.3 140 To order or find out more call 01273 423 983 or scan the QR code. www.tecoproducts.co.uk 49 TECO Product Index Joist Hangers PRODUCT INDEX Mini Hangers Woody No Tag Woody Standard Woody Mini Short Leg Woody Short Leg Woody Long Leg Woody No Tag Long Leg Single Piece Masonry Hangers Welded Masonry Hangers Masonry Return Hangers Welded Masonry Return Hangers Masonry Straddle Hangers Angled Face Fix Hangers Multi Functional Face Fix Hangers Heavy Face Fix Hangers Nail Plates & Connector Plates 2 3 3 3 3 4 4 5 5-6 7 7 8 8 9 10 Truss Clips & Girder Hangers Truss Clips Girder Truss Shoes Girder to Girder Hangers 11 11 12 Straps, Waterbar & Banding Light Duty Straps Heavy Duty Straps Heavy Engineered Straps Timber Frame Straps Heavy Edge Rolled Straps Fixing Band Scaffold Board End Band Waterbar 13 13 14 14 15 16 16 16 Timber Connectors Double Sided Timber Connectors Single Sided Timber Connectors Timber Connector Tools Shear Plate Connectors Split Ring Connectors 17 17 17 18 18 Brackets & Framing Anchors Angle Brackets Corner Brace Stretchure Plate Framing Anchors Du-al-clip 50 19 19 19 20 20 Nail Plates Corner Plates Tee Plates Jointing Plates 21 21 21 21 Sole Plates & Sole Plate Channels Sole Plate Anchor Sole Plate Channel 22 22 Frame Cramps & Frame Ties Fishtailed Frame Cramps Safety End Frame Cramps Screw Ties Screw In Frame Tie Window Board Tie 23 23 23 23 23 Bead & Mesh Standard Angle Bead Mini Mesh Skim Bead / Thin Coat External Render Stop / Bell Bead Plaster Stop uPVC Bead Drywall Tape Corner Tape Paper tape Alkaline Resistant Render Mesh Expanded Metal Lath Coil Hex Mesh Expanded Metal Lath Sheet Soffit Vent Mesh Rib Lath Sheet Ladder Mesh 24 24 24 24 25 25 26 26 26 27 27 27 28 28 29 29 Wall Starters & Ties Wall Starter Kits Insulation Clip Helical Bar Helical Bar Grout Pointing & Grouting Gun Kit Housing Ties General Purpose Wall Ties Double Triangle Wall Ties Butterfly Wall Ties Starter Ties Timber Frame Ties Movement Ties 30 30 30 30 30 31 31 31 31 32 32 32 www.tecoproducts.co.uk Fencing 33 33 34 34 34 34 34 34 34 35 35 35 35 35 35 35 Concrete Screws Anker Bolt Screws Thunderbolts Coach Screws Timber Drive Screws Deck Screws Stainless Steel Woodscrews Timber Master Drywall Screws Metalfix Self Drilling Screws Woodfix Self Drilling Screws 43 43 43 44 45 45 45 46 46 46 46 PRODUCT INDEX Arris Rail Brackets Fencing Clips Cake Stand Post Shoes U Shoe Post Shoes Bolt Down Shoes Concrete In Shoes Fencing Drive Tool Fence Post Extender Fencing Repair Spike Fencing Spike Fence Panel Security Bracket Fence Post Wall Bracket Gravel Board Cleat Extended Gravel Board Cleat Gravel Board Clip Gravel Board Clip (with Lip) Knee Rail Straps Screws Builders Plastics Damp Proof Membrane Damp Proof Course Rubble Sacks Temporary Polythene Sheet 47 47 47 47 Studding Studding Stud Connectors 36 36 Washers & Nuts Square Plate Washers Spring Washers Taper Washers Heavy Round Washers Penny Washers Standard Washers Nuts 37 37 37 38 38 38 38 Miscellaneous Gallows Brackets Herringbone Joist Struts Hip Irons Z Clips Standard Plastic Plugs Nylon Wall Plugs Universal Plugs Nylon Nail Plug Push Plugs Resin 48 48 48 48 49 49 49 49 49 49 Nails Square Twist Nails Round Wire Nails Annular Ring Shank Nails Suretwist Nails 39 39 39 39 Bolts Countersunk Socket Screws Hex Head Bolts Coach Bolts 40 40 - 41 42 Can’t find what you’re looking for? Give us a call on 01273 423 983 www.tecoproducts.co.uk 51 Delivery TECO’s efficient manufacturing process and consistent stock levels ensure a prompt delivery. We offer a wide range of delivery services which include our own vans. Whether you need a same day courier, overnight service, or just a standard 3 to 4 day service, TECO can accommodate. Boxing & Labelling All standard TECO boxes have rip top lids and are tape free. TECO boxes are designed for light lift and minimal air content to maximise shelf space. We aim to make our labelling as informative as possible. Our CE labels give additional product information to help the installer. TECO offer all products barcoded if required. Technical Services Literature and Samples are available upon request. For more information, please call our sales team on 01273 423983 Opening times Our offices are open: Monday to Thursday 7:30am – 5pm Friday 7:30am – 4:30pm Where to find us Our manufacturing plant is on the South Coast in Brighton. For a map of our location visit the contact page on our website www.tecoproducts.co.uk Notes 52 www.tecoproducts.co.uk Tel 01273 423 983 Email [email protected] Web www.tecoproducts.co.uk 0127 3 423 983 Fax 0127 3 410 074 Email sales@te coproducts .co.uk Ron Sammons Ltd We llington Road Por tslade Brighton East Susse x BN41 1 DN w w w.tecoproducts.co .uk Telephone