Wireless internet Access

5.Now open Safari to start browsing the internet
(fig. o) - you should see the wifi icon to show
you are connected to a wifi network. Safari will
then prompt you with a username and password
screen (fig. n) – enter the details into this screen as
provided on the RamsayWireless access card.
(iPad - fig. o)
(iPhone - fig. o)
6.Tap Go once you have entered the username /
password (fig. p) and you will be able to start
browsing the internet.
How to
get online…
6.Enter the logon details as provided on the
WiFi@Ramsay Access Card (password is case sensitive).
7.Click on the Go button to proceed to the internet.
1. Ensure your wireless enabled laptop or PDA/phone is
turned on and has its wireless signal/switch activated.
WiFi FAQs
2. Go to the available Wireless Network Connection
List, as displayed on your laptop/PDA/phone.
What is wireless internet?
3. Click on Patient and the click on the Connect
button. Enter the WPA key when prompted
and then click Connect. The WPA key is
ramsaypatient. Validate that you have connected
to the WiFi@Ramsay wireless network.
Wireless internet, WiFi and WLAN all refer to a
networking technology that uses radio frequency
instead of physical wire to allow you to connect
to the internet when you’re in a wireless hotspot
location.
How do I know if my laptop/device is
wireless?
Wireless laptops and PDAs have a wireless
icon displayed on them, such as an Intel@
Centrino™Mobile Technology logo. If your device
doesn’t have wireless built-in, you can buy a separate
wireless card from any major electronics store.
4. Open your Internet Browser.
The WiFi@Ramsay login page will appear after a
short time, as per sample screen beIow;
(fig. p)
How secure is it?
Ramsay Health Care uses stringent and monitored
multi-layer Firewall/Security technology to ensure
only valid network traffic is delivered to and from
this internet connection. Ramsay Health Care does
recommend that when using the WiFi internet you
ensure you have a robust and current Anti-Virus
software as well as personal firewalls installed on
your PC.
What are the terms and conditions?
The terms and conditions for use of the WiFi@
Ramsay internet access can be found on the landing
page when you connect.
5. Review the Usage Policy and Terms and Conditions
and tick the box to accept the terms of use.
www.ramsayhealth.com.au
Wireless
Internet
Access
Need more help setting up...
Windows 8
Windows Vista & Windows 7
1. Make sure Wi-Fi is turned on. (This varies on
different devices).
1. Go to Start, Control Panel then Network
and Sharing Center. Go to Manage Wireless
Networks on the left of the screen.
2.Click on the Desktop tile. In the bottom right
hand corner click on the wireless network icon
(fig. a). You will then see the list of available networks.
(if Wi-Fi is turned on.) (fig. b). Click on Patient.
In the Window that appears you will need to type
in the WPA Key which is ramsaypatient (fig. c)
3.Open Internet explorer, once open you should
get the below page. If the below page does not
appear just try to go to any website and it should
pop up. (fig. d) Enter your username and password
as on your card, press go>>
n the next page click Continue as on picture
O
below (fig. d). Once you click continue you will get
your home page and will be connected.
2. Make sure Patient is positioned on the top of
the list by moving it up if needed (fig. f). If no
wireless networks are displayed, ensure your
wireless switch is on. Close the Manage Wireless
Networks screen.
3. Go to Manage Network Connections (Vista)
or Change Adaptor Settings (Win 7) on the
Network and Sharing Center page. Rightclick on Wireless Network Connection and click
on Properties, click Continue if displayed.
Highlight the Internet Protocol Version 4 option
(fig. g) and click on Properties.
4. Select Obtain an lP address automatically and
Obtain DNS server address automatically as
(fig. h). Then select OK.
Windows Vista
5. Lastly, to configure Microsoft© Internet Explorer,
open your web browser and go to Tools. Select
Internet Options and the tab Connections.
Under LAN settings, open the window for Local
Area Network (LAN) settings.
iPhone / iPad connectivity to
Ramsaywireless
1.Open the Settings icon (fig. k).
2.Tap on the Wi-Fi icon (fig. l).
(fig. k)
Ensure the following options are NOT selected.
• Automatically detect settings
• Use automatic configuration script
• Use a proxy server for your LAN
Then select OK. If you have had to change any settings during this configuration process, please
restart your laptop.
6. Open another browser window. The WiFi@Ramsay
landing page should now appear.
(iPhone - fig. l)
(iPad - fig. l)
3.Make sure Wi-Fi is turned On and tap Patient
listed under Choose a Network (fig. m).
Mac Users
Mac OSX Operating System
1.Click on the AirPort icons in the toolbar and select
Turn AirPort On.
(fig. a)
2.Select Patient from the list of available wireless
networks (fig. i).
3.Enter the Password details when prompted and
then click Join. The password is ramsaypatient.
4.Open your internet browser and you will reach the
WiFi@Ramsay landing page (fig. j).
(fig. f)
(fig. m)
4.Enter the password ramsaypatient when
prompted (fig. n) and tap Join
(fig. d)
(fig. b)
(fig. i)
(fig. c)
(fig. e)
(fig. g)
(fig. h)
(fig. j)
(fig. n)