MBO Folder Parts - Printer`s Parts Store

Transcription

MBO Folder Parts - Printer`s Parts Store
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
TC Counter
RTC Counter
Olden Enterprises RTC (Rate & Total Count) And TC (Total Count) Counters Are Fully Electronic With No Moving Parts. Both Feature Very Large And Bright
Led Displays. The Display Can Easily Be Read From 15 Feet Away.
• The Sensor Counts Using Invisible Infrared Light. Nothing Ever Touches The Piece Being Counted, Which Can Be Up To 2” Away.
• RTC & TC Counters Have An Electronic Memory That Uses Advanced Electronic Circuitry To Retain The Count. There Is No Battery That Ever Needs
Replaceing!
• The RTC Counter Display Can Be Switched To Display The Count Rate In Pieces Per Hour. The Rate Function Is Displayed Until The Next Push Of The
Count/Rate Switch.
• Sensor Has A 10’ Curly Cord And Mounts With Its Own Magnet. Adapters Are Provided For Non-Magnetic Surfaces.
• Counters Come With A New Generation Sensor And Standard 6” Post Mount.
• Counter Body Is Compact And Easy To Install Without Tools.
The Counters Are Used On Folders, Stitchers, And Other Bindery Equipment, As Well As Various Inserters, Mailing Machines, Etc. They Mount To The Machine
With One Of Four Available Mounts. The Half-Round At The End Of The Post Slides Into A Matching Hole In The Bottom Of The Counter Case. The Post Mount
Slides Over Any Vertical Edge Up To 5/8” Thick And Is Secured By A Thumbscrew.
Optional Mounts: The Magnetic Base Mount Features An Adjustable Post, Which Attaches With A Strong Magnet To A Horizontal Surface And Has The Short
Post That Can Be Tilted Up/Down And Locked In Place. This Allows The Display To Be Aimed At The Operator’s Eyes. The Vertical Magnetic Base Mount (Not
Pictured) Has A Straight, Non-Adjustable Post And Is Designed To Allow The Counter To Be Mounted On Vertical Surfaces. The Adjustable Post Mount Has A
Short Post That Can Be Tilted Up/Down And Locked In Place, Aiming The Display At The Operator’s Eyes.
Specifications:
Power Requirements: 110 Volts, 60 Hz, 5 Watts
Maximum Count: 999,999
Sensor Size: 1.5” X 1” X .6”
Batch Counter
Maximum Counting Speed: 200,000+ Per Hour
Counter Size: 5.5”W X 3.5”H X 2.3”D
The Olden Enterprises Batch Counter Is A Seven Digit Total Counter, Two Rate Meters And Job Time Display In One
Compact, Easy To Operate Unit. Four Digit Maximum Batch Size. Variable Delay Time Controls Feeder Or Conveyor. The
Counter Body Can Be Ordered With Different Accessory Packages For Use On Folders, Stitchers, Inserters, Etc. Easy To
Install On Most Baum, O&M, Mbm, Stahl & Mbo Folder Models. Uses The Same Mounts Shown Above. Contact Your Olden
Enterprises Dealer Or The Factory For Details On Selecting The
Accessory Package For Your Application.
Specifications:
Max. Counting Speed: 400,000+ Per Hour
Max. Rate Displayed: 90,000 Per Hour
Power Required: 110 Volts, 60 Hz, 5 Watts
Running Time Displayed: 99.99 Hours
Max. Total Count: 9,999,999
Preset Batch Delay: 0.1 - 9.9 Seconds Preset Batch Size: 1 – 9999
Counter Size: 5.5”W X 3.5”H X 2.3”D
Sensor Size: 1.5” X 1” X .6”
We Have Parts Available For AB Dick, Baum, Challenge, Martin Yale,
MBO, Profold & Stahl Folders Please Call, Fax Or E-Mail For Items Not
Listed.
Maticlean Roller Cleaner
And Conditioner
Matlclean Can Be Used On Chrome,
Rubber, Nylon, And Ceramic Rollers.
Static Tinsel
10 Feet
24 Yards (72 Feet)
ZO36658
ZO36673
This Is Only A Sample Of Items Available
Quart
Gallon
MC222611
MC222613
1
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
AB Dick Folder Parts
Knob
ZA63867
A
A
A
B
C
D
E
Rollers
A
Model 52
A
Model 58 For 5/16 Id Pulley
A
Model 58 For 7/16 Id Pulley
B
Model 52
B
Model 58
C
Model 52
C
Model 58
M Model 52
M Model 58
AB63416
AB63985
AB63930
AB63420
AB63933
AB63416
AB63930
AB63418
Obsolete
Bushings For Above Rollers
A&C
Model 52
A, C, M
Model 58
B
Model 52
B
Model 58
M
Model 52
AB63499
AB63929
AB65100
AB63928
AB63449
Springs For Rollers
A
Model 52 & 58
C
Model 52
C
Model 58
M
Model 52
M
Model 58
P38327
P38327
ZA190174
AB190175
ZA190174
Pulley 1 7/8” Dia.
Pulley 2 1/2” Dia.
Pulley Model 58
Square Belt
Gear & Pulley Assy
Square Belt
Pulley
AB63446
N/A
ZA63860
ZA11072
ZA63789
ZA11088
ZA63796
Model 52 & O.S. Model 58
Drive Pulley
Timing Belt
ZA63457
P3805
N.S. Model 58
Drive Pulley
V-Belt
ZA63857
P4902
Stacking Spring
Weight
Model 58 Uses 2 Of Each
ZA63980
ZA63981
Switch
Stacking Belt
Model 52 Uses 3
ZE450
P3920
Model 58 Uses 5
Rubber Foot
Obsolete
Tires
Feed Wheel N.S. W/Bushing
ZA31067
Feed Wheel Old Style
ZA63207
Rubber Sererator
ZA31068
Feed Wheel Shaft Bushings
Pulley Side Bushing W/Holes
Other Side Model 52 Nylon
Other Side Model 58 W/Holes
Ratchet
AB63865
AB65100
AB63865
Roller Model 52
Roller Model 58
Obsolete
Obsolete
Motor Pulleys
Model 52 Timing Pulley
O.S. Model 58 Timing Pulley
N.S. Model 58 Variable Speed Pulley
AB63469
N/A
AB64709
Obsolete
Ratchet Lever Spring
Model 52
Model 58
Fold Roller Gear
Model 52
Model 58
2
ZA63483
ZA63964
Springs For Stacking Plate Shaft
This Is Only A Sample Of Items Available
P32718
P36716
AB63462
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Baum Folder Parts
26” And 30” Perforator Blades For 35mm Slitter Shafts – M1 Knife Shape
# Teeth
OD
Thickness
Cutting
Slit
(MM)
(MM)
Angle
Length
5
65.5
0.5
20˚
32
6
61.5
0.5
30˚
29
8
61.5
0.5
30˚
21
10
61.5
0.5
30˚
17
15
61.5
0.5
30˚
8
18
61.5
0.5
30˚
4
28
61.5
0.5
20˚
3
12
62
0.5
20˚
13
12
62
0.5
20˚
13
15
62
0.5
20˚
7
18
62
0.5
20˚
7
18
62
0.5
20˚
8
15
62
0.5
20˚
7
18
62
0.5
20˚
7
18
62
0.5
20˚
8
60
59
0.5
20˚
2
80
59
0.5
20˚
1
80
59.5
0.5
20˚
1
80
59.7
0.5
20˚
1
36
59.7
0.5
30˚
3
60
60
0.5
20˚
2
80
60
0.5
20˚
2
60
61
0.5
30˚
2
60
61.5
0.5
20˚
2
90
61.5
0.5
20˚
1
30
61.5
0.5
30˚
4
32
61.5
0.5
30˚
2
36
61.5
0.5
30˚
3
45
61.5
0.5
30˚
4
48
61.5
0.5
30˚
2
60
61.5
0.5
30˚
2
40
62
0.5
20˚
2
12
61.5
1
30˚
11
12
61.5
1
30˚
11
18
61.5
1
30˚
6
18
61.5
1
30˚
6
12
61.5
2
30˚
11
12
62
2
30˚
11
18
61.5
2
30˚
6
18
61.5
2
30˚
6
Connector
Length
6
3
3
2
3
7
3
3
3
6
4
3
6
4
3
1
1
1
1
2
1
1
1
1
1
2
4
2
1
2
1
3
5
6
5
5
5
5
5
5
26” And 30” Perforator Blades For 35mm Slitter Shafts – M2 Knife Shape
# Teeth
OD
Thickness
Cutting
Slit
(MM)
(MM)
Angle
Length
12
61.5
2
40˚
11
15
61.5
2
40˚
8
18
61.5
2
40˚
6
Connector
Length
5
5
5
Notes
26” And 30” Punch Perforating Blades For 35mm Slitter Shafts – M3 Shape
# Teeth
OD
Thickness
Cutting
Slit
(MM)
(MM)
Angle
Length
12
64
0.9
12
12
64
1.2
12
Connector
Length
5
5
Notes
26” And 30” Scoring Blades For 35mm Slittler Shafts – M4 Knife Shape
OD (MM0
Thickness (MM)
Notes
59
0.8
59.5
0.8
60
0.8
Heavy Score Good For 16-Pg Or 32-Pg Signature
61
0.8
60.5
2
Wide Score For Maps Or 32-Pg Signature
This Is Only A Sample Of Items Available
Notes
Parallel
Right Angle
Part#
ZI200-769-02-00
ZI200-756-07-00
ZI200-756-08-00
ZI200-756-13-00
ZI200-756-09-00
ZI200-756-01-00
ZI210-621-01-00
ZI200-759-01-00
ZI205-978-01-00
ZI200-769-01-00
ZI200-749-02-00
ZI205-978-02-00
ZI200-769-01-00
ZI200-749-02-00
ZI205-978-02-00
ZI200-754-06-00
ZI200-754-03-00
ZI200-754-01-00
ZI200-754-02-00
ZI200-756-12-00
ZI200-754-08-00
ZI200-754-04-00
ZI200-756-11-00
ZI200-754-05-00
ZI200-754-07-00
ZI200-756-01-00
ZI200-756-02-00
ZI200-756-03-00
ZI200-756-04-00
ZI200-756-05-00
ZI200-756-06-00
ZI200-749-03-00
ZI226-350-01-00
ZI226-350-03-00
ZI226-350-02-00
ZI226-350-04-00
ZI226-401-01-00
ZI226-401-03-00
ZI226-401-02-00
ZI226-401-04-00
Part#
ZI224-773-02-00
ZI224-773-01-00
ZI224-773-03-00
Part#
ZI213-027-01-00
ZI213-028-01-00
Part#
ZI200-742-12-00
ZI200-742-09-00
ZI200-742-06-00
ZI200-742-05-00
ZI200-753-01-00
3
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Baum Folder Parts
26” And 30” Slitting Blades For 35mm Slittler Shafts – M1 Knife Shape
OD (MM)
Thickness (MM)
Cutting Angle
Notes
60
0.5
30˚
Light Weight Stock Or Single Sheet
60.5
0.5
30˚
62.5
0.5
30˚
63.5
0.5
30˚
For Slitting Very Heavy Stock
61
2
30˚
Heavy Duty Slitter For Knife-To-Knife Slitting
61.5
1
30˚
61.5
1
30˚
64
0.5
45˚
69
2
45˚
64
2
30˚
Solid Perforator Blades
7/8” Shaft
6 Tooth (1 TPI)
12 Tooth (2 TPI)
15 Tooth (2.5 TPI)
18 Tooth (3 TPI)
20 Tooth (3.5 TPI)
24 Tooth (4 TPI)
31 Tooth (5 TPI)
41 Tooth (7 TPI) .060
41 Tooth (7 TPI) .035
64 Tooth (11 TPI)
98 Tooth (17 TPI)
98 Tooth (17 TPI)
1 1/8” Shaft
7 Tooth (1 TPI)
12 Tooth (1.7 TPI)
15 Tooth (2 TPI)
30 Tooth (4 TPI)
50 Tooth (7 TPI)
86 Tooth (12 TPI)
ZI7618
ZI6605
ZI7895
ZI7896
ZI29629
ZI7619
ZI6798
ZI7791
ZI10164
ZI11962
ZI260-328-01-00
ZI55283
4
Slitter Blades
7/8” Shaft
3/32” Thick Countersunk Bevel Side
3/32” Thick Countersunk Flat Side
.062” Thick Countersunk Bevel Side
.062” Thick Countersunk Flat Side
Hollow Ground Countersunk Flat Side
Hollow Ground Countersunk Bevel Side
1 1/8” Shaft
With Key Replaced By 93209
With Three Countersunk Holes
Split Slitter
ZI6378
ZI6804
ZI15240
ZI15241
ZI15573
ZI15574
ZI93209
ZI51943
ZI10361
ZI44706
ZI10362
ZI10363
ZI10364
ZI53425
Split Perforator Blades 1 1/8” Shaft
7 Tooth (1 TPI)
ZI52087
12 Tooth (1.7 TPI)
ZI55776
15 Tooth (2 TPI) Straight
ZI51940
15 Tooth (2 TPI)Angular
ZI55777
30 Tooth (4 TPI)
ZI51942
50 Tooth (7 TPI)
ZI51941
Knock Out Perforator Blades
12 Tooth 7/8” Shaft (1.7 TPI)
15 Tooth 1 1/8” Shaft (2 TPI)
ZI91593
ZI16196
Micro Perf Blades
1 1/8” Shaft Knife (72 Tpi)
1 1/8” Shaft Lower Anvil
7/8” Shaft Knife (72 TPI0
7/8” Shaft Lower Anvil
ZIFK0000386
ZIFK0000387
ZI263-889-01-00
ZI268-320-01-00
Score Blades
7/8” Shaft
Light Score 0.60
Heavy Score .125
Split Slitter
1 1/8” Shaft
#1 Score
#2 Score
Split Score
PART#
ZI200-747-04-00
ZI200-747-03-00
ZI200-747-06-00
ZI200-747-05-00
ZI205-970-01-00
ZI226-341-03-00
ZI226-341-02-00
ZI205-972-03-00
ZI205-970-03-00
ZI205-972-03-00
Tires (I.D.XO.D.XW)
Caliper Tire 1 5/16X1 7/8X5/8
Pull Out Tire 7/8” Slitter Shaft 15/16X1 11/16X1/2
Retarder Tire 7/8X1 3/4X1
Retarder Tire 1X1 1/2X5/8
Retarder Tire 1X1 1/2X1
Retarder Tire, Ultrafold 15/32X1X1
Feed Tire 3 1/4X3 3/4X5/8
Feed Tire, Ultra Fold 1 3/32X1 13/16X1
Scoring Rubber, 7/8” Slitter Shaft
Scoring Rubber, 1 1/8” Slitter Shaft
Pull Out Tire, 1 1/8 Slitter Shaft
Sucker Wheel Tire 1 7/16X1 3/4X1/4
Feed Tire Floor Models
Pull Out Tire – Toner Reistant
ZI6378
ZI6380
ZI263-582-01-00
ZI10352
ZI10353
ZI51947
This Is Only A Sample Of Items Available
Marbles
5/8” Steel
5/8” Glass
3/4” Steel
3/4” Glass
1” Glass
1” Steel
1” Delrin
1 1/4” Steel
1 1/4” Acrylic
Liner-Marble Holder
ZI6182
ZI3750
ZI10306
ZI12718
ZI14993
ZI45290
ZI13266
ZI48429
ZI7781
ZI10350
ZI10347
ZI50080
ZI8997
ZI52335
ZI21123
ZI21128
ZI21124
ZI21129
ZI21125
ZI21130
ZI24115
ZI31018
ZI31016
ZI53384
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Baum Folder Parts
Blade Holders
7/8” Shaft, 5/8” Wide
7/8” Shaft, 6411 W/ Metric SS
7/8” Shaft, 1” Wide
7/8” Shaft, Screw Collar
1 1/8” Shaft, Screw Collar
1 1/8” Shaft, Screw Collar
1 1/8” Shaft, Snap Ring
1 1/8” Shaft, Three Screw
ZI6411
ZI264-089-01-00
ZI6413
ZI52092
ZI10688
ZIS52083
ZI91483
ZI93329
Perf And Score Collars
7/8” Shaft, Female Perf
7/8” Shaft, Female Perf 6799 W/Metric SS
7/8” Shaft, Sheet Pullout Sleeve
7/8” Shaft, Score
7/8” Shaft, Score 7780 W/Metric SS
7/8” Shaft, Knockout Perf
7/8” Shaft, Scoring Lower
1 1/8” Shaft, Sheet Pullout
1 1/8” Shaft, Scoring Rubber
1 1/8” Shaft, Perforator
1 1/8” Shaft, Knockout Perf
1 1/8” Shaft, Scoring Lower
1 1/8” Shaft, Score Rubber/Steel
ZI6799
ZI264-084-01-00
ZI6997
ZI7780
ZI264-086-01-00
ZI91594
ZI51987
ZI10346
ZI10351
ZI10360
ZI16194
ZI51948
ZI51917
Register Tapes
1”X61” PVC
1”X61 1/8” Cloth
1”X73” Cloth
1”X73” PVC
1”X97” Cloth
1 1/2”X35 1/8” Cloth
1 1/2”X61” PVC
1 1/2”X61 1/8” Cloth
1 1/2”X73” Cloth
1 1/2”X73” PVC
1 1/2X74 1/2” PVC
1 1/2”X90” Cloth
1 1/2”X97” Cloth
1 1/2”X 102” PVC
1 1/2”X105” Cloth
1 1/2”X105” PVC
1 1/2”X105” PVC
1 1/2”X128 1/2” PVC
50MMX78.31” SYN
ZI3111
ZI20924
ZI20925
ZI30217
ZI20926
ZI21771
ZI3110
ZI20929
ZI21679
ZI3162
ZI31200
ZI22470
ZI20930
ZI23909
ZI20931
ZI30861
ZI31310
ZI31311
ZI260-318-01-00
Steel, Solid Rubber/Urethane, And Combination Rollers Are Available
For All Machines
Strippers, Guide Shoe & Stacker Hold Down
Center Stripper S
1/4” Wide
1/8” Wide
1/4” Brass, 7/8” Shaft
1/8” Brass, 7/8” Shaft
1/8” Wide
1/4” Brass, 1 1/8” Shaft
1/8” Brass, 1 1/8” Shaft
1/8” Center Trim
1/4” Center Trim
Edge Strippers
Outside Right Hand
Outside Left Hand
Outside Right Hand
Outside Left Hand
Perf Strippers
Stripper – Slotted
Stripper – Slotted
Stripper – Slotted (714)
Guide Shoes & Stacker Hold Down
Clamp
Shoe
Spring Stacker Hold Down
Guide Shoe
Guide Shoe
Guide Shoe
Guide Shoe
Spool And Related Parts
Spool Pin - Short
Spool Pin – Long
1” Tape Spool
1 1/2” Tape Spool
Tape Roll Bushing
Spool Arm
Brass Tip Set Screw
Perf/Score Screw
Slitter Blade Screw
Stacker Belts
19 1/2”X35 1/8”
26 1/2”X47”
17 3/4”X28 3/4”
24”X47”
1 1/2”X35 1/8” (ALL 714 Except XLT)
17 3/4”X35 1/8”
1 1/2”X35 1/4”
1 1/2”X44.98” (714XLT)
This Is Only A Sample Of Items Available
ZI13328
ZI13329
ZI28613
ZI28614
ZI51828
ZI92447
ZI92448
ZI6436
ZI6437
ZI6434
ZI6435
ZI16437
ZI16438
ZI6438
ZI29255
ZI45208
ZI6439
ZI6442
ZI6443
ZI9258
ZI14803
ZI38973
ZI42662
ZI6231
ZI7643
ZI6232
ZI6902
ZI14349
ZI26795
ZI20438
ZI20312
ZI7728
ZI6346
ZI7103
ZI10272
ZI18717
ZI21771
ZI26307
ZI260-797-01-00
ZI264-697-01-00
5
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Baum Folder Parts
Caliper Parts
Pin
Bushing
Draw Roll Hub
Draw Roll Band
Spring
Upper Spring Guide
Lower Spring Guide
Throw Off Wheel
Floor Model Folder Gears
Description
21T Roll Spur Gear
18T Roll Spur Gear
18T Roll Spur Gear
36T Idler Spur Gear
5T Pinion Spur Gear
13T RH Roll Helical Gear
13T LH Roll Helical Gear
13T RH Roll Helical Gear
18T Helical Gear Assy
18T Helical Gear Assy
21T Helical Gear Assy
21T Helical Gear Assy
21T Helical Drive Gear Assy
21T Helical Drive Gear Assy
26T Helical Drive Gear Assy
26T Helical Drive Gear Assy
36T Idler Spur Drive Gear
5T Pinion Spur Drive Gear
18T Bevel Drive Gear
20T Feeder Bevel Drive Gear
21T/24T Bevel Spur Drive Gear
21T Spur Drive Gear
27T Spur Drive Gear
35T Spur Grive Gear
18T Spur Drive Gear
56T Idler Steel Spur Drive Gear
56T Delrin Spur Drive Gear
21T Sheave Drive Gear Assy
20T Bevel Crosscarrier Gear
21T Spur Crosscarrier Gear
18T Sheave Spur Crosscarrier Gear
28 T Spur Crosscarrier Gear
32T Spur Crosscarrier Gear
26T Sheave Spur Crosscarrier Gear
32T Spur Crosscarrier Gear
Notes
MKII, MKIII, 200, 600, 700
500 Series, Futura
MKI, 400, O&M
MKII
Gear Driven Stackers
Libery Series
Libery Series
Libery Series
Legend 20 & 23
Legend 20 & 23
Legend 20 & 23
Legend 20 & 23
Legend 26 & 30
Legend 26 & 30
Legend 26 & 30
Legend 26 & 30
MKII
Gear Driven Stackers
MKII 8 Page Drive
Continuous Feeder
MKII 8 Page Gear Box
Stacker
Stacker
Stacker
MK1, 400, 500 Series
MK1, 400, 500 Series
O&M Futura
700 Series
MKII
MKI, 400, 500 Series
MK1, 400, 500 Series
F18, F20, 500 Series
MKII IMP, 200, 600, 700
MKII, 200, 600, 700
Liberty Series
Pump Filters
Description
Intake Air Filter
Filter Element (2565 & 1550)
Felt Pump Filter
Pump Filter Element (10X1040)
Pump Filter (0740)
Pump Filter (2567)
Filter Canister With Element
Filter Element
Element – Filter Ext
Internal Filter
Internal Filter
Internal Filter
6
Part#
ZI6077
ZI9544
ZI9544-S
ZI3618
ZI6338
ZI52677
ZI52678
ZI52875
ZIS54251-001
ZIS54251-002
ZIS54251-003
ZIS54251-004
ZI55127-001
ZI55127-002
ZI55127-003
ZI55127-004
ZI3618
ZI6338
ZI6464
ZI6653
ZI7116
ZI7478
ZI7479
ZI9080
ZI11607
ZI14725
ZI3192
ZIS40997
ZI12321
ZI14956
ZI14957
ZI29407
ZI29953
ZI29954
ZI51543
Notes
Gast AB601G
Gast AA905G
Gast D344B
Gast AA905F
Gast B343B
Gast AC393
Becker T4.25
Becker T4.25
Becker T4.40
Becker T4.25 & T4.40
Becker T4.25 & T4.40
Becker T4.25 & T4.40
Part#
21083
21499
21502
21504
30333
30435
BP74000105
268-673-01-00
FK7000224
BP90950500
FK7000223
FK7000066
This Is Only A Sample Of Items Available
ZI6007
ZI6180
ZI6181
ZI 6182
ZI6198
ZI10955
ZI11055
ZI10927
Sheet Detector Tab For 714
A & B Model (SM)
ZI50498
XE & XLT Models (LG)
ZIS261-680-BG-01
714 Table Top Gears
RH Frame
19T Idler 714
19T Idler 714XE
25T Spur
30T Spur
Roller Gears
Slitter Shaft
Feeder Drive
30t Spur
25t Spur
ZI45294
ZI56239
ZI45226
ZI45226
ZI45223
ZI45211
ZI45223
ZI45226
714 Air Feed Shown
Rebuild Kits Are Available For Most Folders
And Typically Include:
Rollers
Selected Bushings/Bearings
Eccentrics
Stacker/Register Tapes
Belts
Roll & Feeder Gears
Deflectors
Feed Tires
Etc
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Baum Folder Parts
30921 Pump Breaker
22900-333 Resistor
30921 Power Breaker
24188 Operator
45025 Panel
22427 Fuse Holder
22997-1 Fuse
22906-007 Potentiometer
30922 Knob
22906-7 Potentiometer
22996-122 Knob
Baum 714 Friction Feed
31682 Counter
53017 Panel
Baum 714 Air Feed
53228 Panel
47431 Panel
30922 Knob
22906-007 Potentiometer
30921 Breaker
22900-333 Resistor
37680-013 Rocker Switch
22472 Fuse
22427 Fuse Holder
30925 Counter
22906-007 Potentiometer
24077 Screw
Baum 714 Friction Ultrafold
Baum 714 Friction Ultrafold II
Roller Bushings
Mark 1 17 1/2X22 1/2
Parallel Drive
8 Page & 16 Page Drive
Idler
Mark 1 20X26
Drive
Idler
Mark II 23X36
Parallel & 16 Page Drive
8 Page Drive
Idler
Mark II 26X40
Parallel & 16 Page Drive
8 Page Drive
Idler
200 Series 20X26
Parallel Drive
8 Page Drive
16 Page Drive
16 Page Idler
200 Series 26X40
Parallel Drive
8 Page Drive
16 Page Drive
16 Page Idler
(4) ZI20954
(2) ZI20954 & (2) ZI20952
(10) ZI21031
(4) ZI20954
(10) ZI21031
(2) ZI21254 & (1) ZI15304
(1 EA) ZI15304, ZI21254, ZI15302
(10) ZI21037
(2) ZI15302 & (1) ZI21254
(3) ZI15302
(10) ZI21037
(2 EA) ZI15302, ZI20959, ZI20957
(2 EA) ZI20959, ZI20957
(2 EA) ZI22054, ZI20957
(10) ZI21258
(2 EA) ZI20959, ZI20957
(2 EA) ZI20954, ZI20957
(2 EA) ZI22054, ZI20957
(10) ZI21258
Pump Vanes
Pump Vane (2565 Dry)
Pump Vane (10x1040)
Pump Vane (1550 Dry)
Pump Vane (3040 Dry)
Pump Vane (11X1740) Long
Pump Vane (11X1740) Long
Vane Kit (2567 Dry-Pump)
Pump Vane (1023)
Pump Vane (Becker T4.25 DSK)
Pump Vane (2567)
Pump Vane (0870 & 1022)
Vane Set (7)
Vane (7 Required)
Notes
Gast AA750D
Gast AB-125-E
Gast AB125B
Gast AB934A
Gast AC411
Gast AC412
Gast K636
Gast K479
Becker
Gast AH195
Gast AB992B
Becker T4.40
Becker T4.25
Filter Jars
Description
Filter Jar, Pump, Pint (2565)
Glass Jar, Pump (3040)
Aluminum Pump Jar (3040)
Pump Jar (0740)
Aluminum Pump Jar
This Is Only A Sample Of Items Available
Part#
21616
21617
21621
22872
23465
23466
261-644-BG-01
267-088-01-00
BP90134900
31466
31467
FK7000065
268-672-01-00
Notes
Gast AA805
Gast AA401
Gast AA-75
Gast AA125
Gast AA-132
Part#
21543
22967
23363
30332
30436
7
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Baum Folder Parts
Update Ultimate Score
Complete Ultimate Score Kit
Includes: 1 Male Collar
1 Female Collar
4 Inserts
1 Removal Tool
1 T Wrench
7/8” Shaft
1 1/8” Shaft
Changing Score Height
Becomes Your Adjustment
Replacement Score Blades
7/8” Shaft Size
.025 Score Blade
.030 Score Blade
.035 Score Blade
1 1/8” Shaft Size
.025 Score Blade
.030 Score Blade
.035 Score Blade
Narrow To Wide Becomes
Your Adjustment
Glue Rollers & Glue Noses
2020 Glue Roller Pos #1 Parallel
2020 Glue Roller All Other Positions
2020 Glue Nose
Baum Folder 26” Standard Urethane
Baum Folder 26” Soft P.U.
Baum Folder 30” Standard Urethane
Baum Folder 30” Soft P.U.
Segmented Glue Nose Baum 26”
Segmented Glue Nose Baum 30”
UP4136
UP4137
UP4138
UP4139
UP4140
UP4141
UP4142
UP4143
UP4030
UP4002
UP4112
UP4421
UP4422
UP4423
UP4424
UP4425
UP4426
Panzer Wheel Weights
Greatly Assists Stacking Of Smaller Signatures Or Bulky Folds
One Wheel Standard Wheel Assy
Replacement Belt
Panzer Weight Base
Panzer Additional Weight
UP1314
UP1329
UP4899
UP4900
Wet Score System
Replaces Steel Scores
Faster Make-Ready
Sharper Cleaner Folds
Can Be Easily Moved
2 Models To Choose From, One For Every Budget
Can Run Up To 4 Score Lines From Single Tank
Micro-Adjustment On Head For Ease Of Make-Ready
3 Different Size Needles For Different Applications
Decreases Packing Cost. Product Lays Flatter Taking Up Less Space
Includes Tank, Two Water Score Arms And All Other Standard Parts
Model 100M2 Manual Shut Off
Model 100EAU2 Auto Electric Controlled (Controlled By Electronic Sheet Sensor)
Accessories
Mounting Bar Kit 30” & Smaller Machines
Mounting Bar Kit 32” & Larger Machines
Additional Score Arm Assembly
Replacement Needles
18 GA X 1”
99HS040
22 GA X 1”
99HS042
18 GA X 2”
99HS070
8
This Is Only A Sample Of Items Available
100STMB
100STMB
100XTRA
20 GA X 1”
99HS041
20 GA X 2”
99HS071
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Martin Yale Folder Parts
1217A
959/959AF S/N 4,000 And Above
Retarder Rubber W/Arbor
Retarder Rubber W/O Arbor
Feed Rubber Only (959)
Suction Wheel Tire (959af)
Sheet Detector Assy. (959AF)
Folding Roller
Main Drive Roller
Left Side Fold Roller Bushings
Right Side Floating Fold Roll Bushings
Right Side Main Drive Roller Bushing
Right Side Fixed Fold Roller Bushing
Fold Roller Springs
Scoring Rubber
Guide Roller
Slitter
Scoring Hub
Perforator 7T
Perforator 3T
Perforator 14T
Speed Control
Circuit Breaker 3.5A
959 Circuit Breaker 2A
959AF Circuit Breaker
Conveyor Belts
Handwheel
Stripper
Leeson Motor Brushes
110VAC Rockfr Switch 959AF
220VAC Rockfr Switch 959AF
ZYWRA003116-WA
ZYWRA003116-NA
ZYW-0008015
Zym-0095250
ZYW-A095224
ZYWRA003015
ZYWRA095034
ZYM-S013009
ZYM-S013009
ZYM-S013010
ZYM-S013013
ZYM-S031059
ZYM-0003083
ZYM-0003080
ZYWRA03085A
ZYM-0003082
ZYWRA03085B
ZYWRA03085C
ZYWRA03085D
ZYWRA0955050959
ZYW-S045195
ZYM-S045195
ZYM-S045002
ZYM-S024002
ZYM-S032047
ZYM-0003132
ZYMRS045138
ZYM-S033015
ZYM-S033053
Retarder Rubber W/Arbor
Retarder Rubber W/O Arbor
Feed Roller S/N 9000-31449
Feed Roller S/N31450-49999
Feed Roller S/N 50000-Current
2ND Fold Roller S/N 50000-Current
4TH Fold Roller S/N 50000-Current
Intermediate Fold Roller S/N 50000-Current
Belt S/N 50000-Current
O Ring Drive Belt S/N 9000-34601
Timing Belt S/N 31450-34601
84 Grey HTD Belt S/N 34602-49999
140 3MM HTD Belt S/N 34602-49999
145 Grey HTD Belt S/N 34602-49999
Conveyor Belt S/N 9000-31449
Conveyor Belt S/N 31450-49999
Conveyor Belt S/N 50000-Current
ZYWRA003116-WA
ZYWRA003116-NA
ZYM-0003548
ZYWRA121745
ZYM-0121760
ZYW-A1217108
ZYW-A1217109
ZYW-A1217107
ZYM-S025055
ZYM-S023001
ZYM-S025056
ZYM-S121796
ZYM-S025055
ZYM-S121791
ZYM-S024002
ZYM-S023053
ZYM-S024013
1501
Retarder Rubber W/Arbor
Retarder Rubber W/O Arbor
Feed Tire
Main Drive Roller
Fold Rollers
Timing Belt S/N 80000-END
Rubber Belt S/N 50000-79999
Timing Belt 210 S/N 50000-79999
Timing Belt 130 S/N 50000-79999
ZYWRA003116-WA
ZYWRA003116-NA
ZYM-0003548
ZYWRA001532
ZYWRA001530
ZYM-S025026
ZYM-S025011
ZYM-S025010
ZYMRS025011
1501X
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
(M)
(N)
24T, 1/2 ID Gear
18T, 1/4 ID Gear
18T, 3/8 ID Gear
210T Timing Belt For
12T Motor Pulley
24T, 3/8 ID Gear
60T/15T Timing Pulley
Dual Gear
150T Timing Belt For 959
Timing Belt For 959AF
60T/15T Timing Pulley
130T Timing Belt For 959
Timing Belt For 959AF
44T Timing Pulley W/Flange
Pulley Flange
1/2X5/8X1 Idler Bushing
14T, 3/8 ID Gear
ZYM-003034A
ZYM-0003036
ZYM-0003035
ZYM-S025010
ZYM-S022017
ZYM-0003033
ZYM-S022021
ZYW-0095136
ZYM-S025026
ZYM-S025008
ZYM-S022021
ZYM-S025024
ZYM-S025010
ZYW-S022019
ZYM-S022022
ZYM-S013053
ZYM-0095903
Feed Roller
Main Drive Roller S/N 0-13999
Main Drive Roller S/N 14000-24999
Main Drive Roller S/N 25000-35392
Main Drive Roller S/N 35393 & Above
Fold Rollers
NON OP Side Belt S/N 0-24999
NON OP Side Belt 25000 & Above
OP Side Belt 80T S/N 0-13999
OP Side Belt 105T S/N 35393 & Above
Roller Tension Spring S/N 0-8999
Roller Tension Spring S/N 9000 & Above
Feed O-Ring S/N 14000-35392
Idler O-Ring S/N 14000-35392
ZYM-0001649
ZYW-A001620
ZYW-A001679
ZYW-A001676
ZYW-A001690
ZYW-0001619
ZYM-S025041
ZYM-S025055
ZYM-S025047
ZYM-S025004
ZYM-0001632
ZYM-0001665
ZYM-S023051
ZYM-S023052
1601/1701
Feed Wheel
Retarder
1ST Fold Roller
2ND Fold Roller
3RD Fold Roller
4TH Fold Roller
123T Belt
Conveyor Belt
This Is Only A Sample Of Items Available
ZYW-A1601011
ZYM-01601003
ZYW-01601051
ZYW-A1601052
ZYW-A1601053
ZYW-A1601054
ZYM-S025059
ZYM-S023048
9
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Perforators
10
Shaft
Size
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
30mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
Description
Knockout Perf
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Micro Perf
Split Perf
Micro Perf
Micro Perf
Micro Perf
Split Perf
Solid Perf
Micro Perf (db)
Micro Perf (db)
Micro Perf (db)
Number
Of Teeth
9T
10T
12T
15T
22T
42T
50TPI
70T
72TPI
72TPI
72TPI
82T
82T
159T
212T
318T
OD
mm
54
53
53
53
53
53
54
53
49
50
52
53
53
50.6
50.6
50.6
ID
mm
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
Thickness
mm
1.57
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.5
0.8
0.4
0.4
0.4
2.0.5591.100
2.0.5591.120
2.0.5591.070
2.0.5591.030
2.0.5591.040
2.0.5591.050
SP988
2.505591.060
MP897
MP896
MP890
2.0.5591.082
SP059
10.5590.10/01
10.5590.08/01
10.5590.06/01
Round Split Perf
Split Perf
Split Perf
Round Split Perf
V Shaped Split Perf
Split Perf
Knockout Perf
Split Perf
V Shaped Split Perf (Wide Gap)
Reverse Teeth Split Perf
Split Perf
Knockout Perf
Split Perf
Knockout Perf
Knockout Perf
Knockout Perf
Split Perf
Split Perf
Round Split Perf
Split Perf
Split Perf (Reverse Teeth)
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf (Reverse Teeth)
Split Perf
V Shaped Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
V Shaped Split Perf
V Shaped Split Perf
Split Perf
V Shaped Split Perf
Split Perf
Split Perf
Split Perf
Micro Perf
Split Perf
V Shaped Split Perf
Split Perf
Split Perf
Split Perf
V Shaped Split Perf
V Shaped Split Perf
Split Perf
5T
6T
8T
8T
8T
10T
10T
12T
12T
12T
12T
12T
12T
12T
12T
12T
14T
15T
15T
16T
16T
18T
18T
18T
18T
18T
18T
18T
28T
28T
30T
30T
30T
32T
36T
36T
40T
45T
48T
50TPI
60T
60T
60T
80T
80T
80T
80T
100T
62
62
61.5
61.5
61.5
62
62
61.5
61.5
62
61.5
62
64
64
64
64
61.5
61.5
61.5
61.5
62
60
61.5
61.5
61.5
62
64
62
60
61.5
62
64
62
61.5
60
61.5
62
61.5
60
62
60
61.5
62
60
62
59
60
60
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
1.2
0.5
0.9
1.2
1.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
SP908
SP720
50210040
SP228
SP520
50210450
60210260
50210050
50210410
SP807
SP808
60210280
MS296
60210300
KP997
KP518
50210460
50211160
SP802
50210970
50211630
50210390
50210060
50210420
5.05591.060
SP590
MS297
SP928
50210210
50210070
MS294
SP060
SP321
SP392
50210720
2007560300
SP468
SP408
50210240
MP459
SP111
MS897
MS295
50210230
SP560
SP888
SP999spec
SP338
This Is Only A Sample Of Items Available
Part#
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Perforators
Shaft
Size
35mm
35mm
35mm
35mm
35mm
Description
Split Perf
Split Perf
Micro Perf (db)
Micro Perf (db)
Micro Perf (db)
Number
Of Teeth
100T
124T
185T
250T
370T
OD
mm
61.5
60
59
59
59
ID
mm
40
40
40
40
40
Thickness
mm
0.5
0.5
0.4
0.4
0.4
Part#
SP777
SP608
10.5590.03/01
10.5590.04/01
10.5590.02/01
40mm
40mm
40mm
40mm
40mm
40mm
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
8T
10T
12T
18T
28T
48T
61.5
61.5
61.5
62
61
60
45
45
45
45
45
45
0.5
0.5
0.5
0.5
0.5
0.5
SP703
SP704
SP705
50210190
50210370
50210380
65mm
65mm
65mm
65mm
65mm
65mm
65mm
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Solid Perf
9T
13T
13T
18T
24T
26T
26T
100
100
100
100
100
100
100
70
70
70
70
70
70
70
0.8
0.5
0.5
0.5
0.5
0.5
1.0
SP088
SP778
SP878
50210341
50211130
50210351
50211300
Slitter & Score Blades
Shaft
Size
30mm
30mm
30mm
30mm
30mm
30mm
30mm
Description
Solid Score
Solid Score
Solid Slitter
Solid Slitter
Split Slitter
Soild Slitter
Solid Slitter
OD
mm
50.8
52
52
53.5
54
54
55
ID
mm
35
35
35
35
35
35
35
Thickness
mm
0.8
0.8
0.8
0.5
0.5
0.8
0.8
2.0.5591.080
2.0.5591.020
SS643
SS853
2.0.5591.090
2.0.5591.010
MN253
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
Split Score
Split Score
Split Score
Split Score
Solid Slitter
Solid Score
Split Score
Solid Slitter
Soild Slitter
Solid Score
Split Slitter
Solid Slitter
Solid Slitter
Split Slitter
Solid Slitter
58.8
59
59.5
60
60
60
61
61.5
61.5
61.5
62
62
62
64
64
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
0.8
0.8
0.8
0.8
1.0
1.5
0.8
0.5
1.0
1.5
0.5
2.0
3.0
0.5
2.0
SS080
50210550
50210020
50210220
SS555
SS973
MN100
50210260
50210760
50210860
50210030
50210250
SS900
50210480
SS006
40mm
40mm
40mm
Split Slitter
Split Score
Solid Slitter
61.5
61.5
61.5
45
45
45
0.5
0.5
0.5
50210150
SS052
50210780
65mm
Split Slitter
100
70
0.5
50210331
This Is Only A Sample Of Items Available
Part#
11
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Continuous & Pile Feeder Parts – New MBO Feeder Drive Motor
A
Side Blower Part
5.0.3661.020
B
Bearing Part
1.0.3544.010
C
Feed Finger Pivot Block
17.3544.00
D
Feed Finger
1.0.3562.010
E
Feed Finger
10.3562.01
F
Spring
2024A & 0102582
G
Teflon Strap 1”X13.750”
0.1.3202.01
G
Teflon Strap 1”X30.750”
0.1.3202.02
G
Teflon Strap 1”X11.50”
0.8.3202.01
G
Teflon Strap 1”X35.50”
08.3202.02
G
Teflon Strap 2”X11.50”
UP2386
GG
Clamp For Teflon Strap B-Series 20mm Bar
Clamp For Teflon Strap Perfection Model
25mm Bar
Teflon Strap Under Chains
2.0.3364.040B
H
Valve Bushing
1.0.2244.020
I
Vacuum Wheel
1.0.2200.351
J
Motor Feeder Drive
Elec. Motor MBO Perfection Drive
Continuous
0104178
GG
GGG
J
K
L
Elec. Motor MBO Perfection
Feeder Drive Gear Box Only
Brushes For Motor
M
Vacuum Tubing
K
12
Gear Box Only
2.0.3364.050
01.3200.17
0103901
0104178GB &
0104179
UP4395
5.0.1171.680
N
Foam Ring
5.0.3239.010
NN
Foam Ring Small
UP3964
O
Feeder Drive Belt T-49
20X1.3X2010
O
Feeder Drive Belt B-115-118-120
00105791
O
Feeder Drive Belt B-16-20
00105940
O
Feeder Drive Belt B23-26-30
20X2300
O
Feeder Drive Belt B26S/B32S
00106055
O
Feeder Drive Belt B21
20X0.9X2280
P
Tape Roller
00111781
Q
Side Blower Tube
5.0.3626-030/040
Q
Side Blower Tube
5.0.3600-270/040
R
Pile Height Switch ( Pile Feed)
BZ2RW82255-A2S
R
Pile Height Switch (Pile Feed)
00126565
S
Pile Back Stop Brush (Cont. Feed)
17.3244.02
S
Pile Back Stop Bush (Cont. Feed)
3.0.6943010
T
Vacuum Belt
17.2202.00
U
Jogger Bone
10.3318.010
V
Smoother Complete
10.3400.200
W
Smoother Complete
17.3400.01
X
Cable For Photo Eye
0131441
Y
Continuous Feed Belt
0106926
Z
MBO Double Sheet Micro Switch
0126417
This Is Only A Sample Of Items Available
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Continuous & Pile Feeder Parts – New MBO Blower Motor
Variable Speed Pulley
A
Variable Speed Pulley With Spring
B
Variable Speed Pulley With Out Spring
C
Cogged Drive Belt
F100B Or 0104373
R100B Or 0104372
22X8X550
A
Form Wheel Assy
15.3400.56
B
Smoother Complete
5.0.3400.210
C
Smoother Complete
15.340.52
D
Compression Ring Set
RFN38006
E
MBO Feeder Chain
UP4164
F
MBO Feeder Chain Link
UP4168
G
Feeder Chain Pulley 12 Tooth
20-260-080
H
Bronze Bushing
119351
I
Feeder Chain Pulley 13 Tooth
1.0.3135.310
J
Feeder Chain Pulley 16 Tooth
1.0.3235.320
Feeder Chain Pulley 51 Tooth
1.0.3335.330
K
Toothed Pulley Vac
17.2236.02
L
Bolt For Toothed Pulley
17.2220.8
M
Valve Bushing Perf Series
17.2227.01
N
Perf. Idler Sprocket Stud
17.3225.00
O
B Series Stud
01.3225.00
P
Double Sheet Feeler
10-300-042
Q
Feed Wheel Weight
083220015
R
Counter Photo Eye
131474
S
Perf. Side Guide Vac Motor
100179
T
Perf. Feeder Belt
107059
U
Smoother
10.3400.300
Clamp Levers
A
Plate Clamp Bracket
B
Clamp Lever MBO Perfection
C
Clamp Lever MBO B Series
D
Clamp Lever Spring
This Is Only A Sample Of Items Available
4.0.5115.020
10.5125.02
5.0.5125.010
2.0.5681.010
13
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Blade Holders
Center Trim Holder 30mm
Blade Holder 30mm
Blade Holder 30mm
Blade Holder 35mm
1.0.5539.310/330
2.0.5539.020.030
35.5539.08
1.0.5539.01/00
Die Block & Transport Collars
Steel Transport Collar 30mm
Steel Transport Collar 35mm
Die Block 30mm
Urethane/Steel Trans 30mm
Urethane/Steel Trans 35mm
Urethane/Steel Trans 35mm
Foam/Steel Trans 35mm
1.0.5339.310
1.0.5339.010
2.0.5539.010
1.0.5339.320
50.220.010
01.5339.00
17-5300-33
Fold Plate Parts
A
Knurled Screw
A
Knurled Screw
B
Knurled Screw
B
Knurled Screw
C
Locking Disc
D
Deflector Stop Screw
E
Plate Stop Screw
F
Deflector Hinge L.H.
G
Deflector Hinge R.H.
H
Hinge Block
10.5629.01
50-410-081
M6X28GN421
00095836
3.0.5628.032
1.0.5629.300
00954635
1.0.5615.030
1.0.5615.020
1.0.5615.010
Brass Roller Adjustment Blocks
A
3.5.5326.020
B
1.0.5326.020
Handwheel Safety Clutch
Handwheel Clutch
Retaing Nut
Key
UP2174
UP2175
UP2176
Marbles And Marble Cups
20mm Plastic Marble
20mm Steel Marble
25mm Plastic Marble
25mm Steel Marble
Adjustable Marble Cup (A)
Non Adjustable Marble Cup (A)
Adjustable Marble Cup B120 (B)
14
MBO20DIAP
MBO20DIAS
MBO25DIAP
MBO25DIAS
5.0.7200.220
15.7200.01
UP4814
Register Drive Couplings & Register Drive Shafts
For B & Perfection Series
AA Complete Assembly
A
Coupling Part
B
Coupling Part (Wood Block)
C
Bearing
D
Circlip
E
Tape Roll
F
Shaft
G
Distance Ring
H
Distance Ring Spacer
I
Key W/Screw
J
Circlip
K
Coupling Part
L
Handwheel Shaft B-26
L
Handwheel Shaft B-30
L
Handwheel Shaft B-26 RA
L
Handwheel Shaft B-26S
L
Handwheel Shaft B-26S RA
L
Handwheel Shaft B/23
L
Handwheel Shaft B/23 RA
L
Handwheel Shaft B-30S
L
Handwheel Shaft B-30S RA
M Bearing
N
Handwheel Shaft
This Is Only A Sample Of Items Available
1.0.4200.300
5.0.4227.011
5.0.4244.011
00109918
00087312
1.0.4232.340
1.0.4226.320
5.0.4228.010
1.0.4228.020
5.0.4243.010
00101402
3.0.5326.024
01.5221.02
01.5221.04
1.23.5221.340
1.23.5221.350
17.5221.00
17.5221.02
01.5221.01
17.5221.16
17.5221.17
00109728
01.5221.05
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Cross Carrier Belts
20X1X2750
20X1X2830
20X1X3480
20X1X3240
20X1X3080
20X1X2540
20X1X2970
T49
B115-B118, B120, B20
B26, B30E, B30, B26E
B26S/30S/32S
B-123
B-23
B-21
Split Guide Transfer Table Belts
870/830X20X1.8
B-30
765/730X20X1.8
B-26
680/645X20X1.8
B-23
925/880X20X1.8
B-26S Perfection
50X1.2X2425
Infeed Belts
50X1.2X2100
50X1.2X1790
50X1.2X1804
50X1.2X2425
UP4813
B-123-26-30
T52
T47/T49 Cont. B16/120
B26S/30S/32S Perfection
B-30 Economic
Z-2 Knife Folder Belts And Transport Belts
20X1X520 Transport Band
20X1X1555 Transport Band
25X1X1750 Drive Belt
Register Drive Couplings & Register Drive Shafts For T-49
AA Complete Reg Drive Coupling
1.0.4200.010A
A
Coupling Part
1.0.4276.020
B
Coupling Part (Wood Block)
1.0.4276.031
C
Bearing
61805
D
Circlip
UP3658
E
Tape Roll
1.0.4232.040B
F
Tape Roll Shaft
1.0.4232.030
G
Bearing
0109918
H
Distance Ring
UP3578
I
Distance Ring Spacer
UP3579
J
Key W/Screw
3.0.4244.030CPC
K
Circlip
SW47
L
Handwheel Shaft T-49
1.5.5221.040
L
Handwheel Shaft T-46
1.3.5221.040
Stacker Belts
40X1.3X1360
75X6.1X845
00106991
Drive Belts
25X1.3X1750
25X1.3X1540
25X1.3X1290
25X1.3X2010
25X1.3X2275
25X1.3X1350
25X1.3X1470
25X1.3X2490
25X1.3X2750
25X1.3X1460
35X1.3X1290
35X1.3X1540
35X1.3X1800
T47/T49
B-123/26/30
B-123/26/30 2 Plate
B-26S/30S/32S Perf Ser 4 Plate
B-26S/30S/32S Perf Ser 6 Plate
B-16/B20
B-21
B-26S/30S/32S 4 Plate W/Pre Slit
B-26S/30S/32S 6 Plate W/Pre Slit
B-23
B-26/30 Economic 2 Plate
B-26/30 Economic 4 Plate
B-26/30 Economic 6 Plate
Poly V Belts
Machine Model
Size
B118, 120/B-20 Para
B21 4 Plate Pile Feed
B-21 4 Plate Para Cont. Feed
B-21 4 Plate, 8 Page
B-21 6 Plate, 8 Page
B-21 6 Plate, Para Pile Feed
B-21 6 Plate, Para Cont. Pile Feed
B-23 Para Cont. Feed
B-23 Para Pile Feed, 8 & 16 Page
B-23 Para Pile Feed, 8 & 16 Page
B-26, B30 Para Section
B-26, B30, 8 & 16 Page Section
B-26, B-30 32 page 2 Plate
B26S, B30S, B32S Para 4 Plate W/O Pre Slitters
B26S, B30S, B32S Para 4 Plate W/O Pre Slitters
B26S, B30S, B32S 8 & 16 Page 4 Plate
Without Pre Slitters
B26S, B30S, B32S 8 Page 6 Plate
Without Pre Slitters
B26S, B30S, B32S 8 Para 4 Plate
With Pre Slitters
B26S, B30S, B32S 6 Plate Para With Pre Slitters
915J8
1016J8
965J8
1016J8
1130J8
1130J8
1092J8
865J8
889J8
915J8
965J8
1016J8
865J8
1054J8
1194J8
1092J8
Part
Number
00107557
00107839
00107565
00107839
0107609
0107609
00107681
UP2131
UP3239
00107557
00107565
00107839
UP2131
00107600
00107651
00107681
1222J8
00107681
1054J8
00107600
1194J8
00107651
Feeder Drive Belts
T47 / T49
B115, 118, 120
B-16/B20
B-123-23-30
B26S/B30S/B32S
B-21
This Is Only A Sample Of Items Available
20X1.3X2010
20X1.3X2010
20X1.3X2300
20X1.3X2300
20X1.3X2600
20X0.9X2280
UP2393
00105791
00105940
UP2394
00106055
UP2871
15
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Bearings
(A) Tape Roller
(A) Tape Roller
(B) Bearing
(B) Bearing
(C) Bearing
(D) Bearing
(E) Bearing
F56202
00111781
80491
00111799
00109728
00109686
00109652
Pull-Out Wheel Assembly
Complete Assembly B Series W/Extra Pull-Out Shaft
Complete Assembly Perfection Series
Rebuild Kit For UP1967
Replacement Spring For UP1967 & UP2620
Replacement Tire For UP1967
Replacement Tire For UP2620
Slitter Shaft Support Pin
B115, B116-120-20-21
B26S/B32S Perfection
B23 B123 B26 B30
T-47/49
B26/B30E
Knob Only
O Ring
T-Knob
UP1967
UP2620
UP1785
UP1109
UP1108
UP2680
30mm
30mm
30mm
30mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
1.5.5323.020
35.5300.27
35.5300.89
1.23.5323.08
12.5323.01
01.5323.01
01.5300.01
01.5323.02
01.5300.048
17.5300.00
17.5300.26
17.5300.108
01.5323.00
Deflectors
B-123 Parallel & 8 Page
B-26 Parallel & 8 Page
B-30 Parallel & 8 Page
B-123/26/30 16 Page
B-26S Parallel & 8 Page
B-30S Parallel & 8 Page
B-32S Parallel & 8 Page
B-30S & B323 With 26” 8 Page
B-26S/30S/32S 16 Page
12.5651.06
01.5651.06
01.5651.07
01.5651.05
17.5651.12
17.5651.00
17.5651.24
17.5651.12
10.5651.30
Cross Carrier Parts
(A)
Cone Assy With O-Ring Drive
(B)
Cone Assy Standard
(C)
Cone Only
(D)
Grommet
(E)
Roller End With Bearing (Non Drive Side)
(F)
Tape Roller (Drive Side)
(G)
Coupling Part
(H)
Roller End (Drive Side)
(I)
Cone Removal Tool
(F-H) Complete Assy
UP3017
17.7200.00
UP3013
4.0.7428.010
70-320-09CPL
70-230-021
70-640-011
4.0.7425.091CPL
17.7200.07
UP3755
UP4216
5.0.5325.050 CPL
1.0.5325.380 CPL
1.0.5325.082 CPL
UP4881
GN6336.1-40-M8-E
UP3685
GN56355 M8
Brass Slitter Shaft Bushing With Pin
2.0.5326.020
Brass Roller Adjustment Block
(A) 3.5.5326.020
(B) 1.0.5326.020
Cross Carrier Height Adjustment Lock Knob (M8x18)
50-370-044
Micro Perf Plastic Mandrel For Machines
With Pre-Slitter Shafts
16
Slitter Shafts
T-49 Parallel & 8 Page
B-20
B-120
B-23
B-123
B-26 Parallel & 8 Page
B-26E Parallel & 8 Page
B-30 Parallel & 8 Page
B-30E Parallel & 8 Page
B-26S Parallel & 8 Page
B-32S Parallel & 8 Page
B-30S Parallel & 8 Page
B26 16 Page
520068PA
This Is Only A Sample Of Items Available
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Stripper Assemblies
Stripper Assemblies
Center Trim Stripper B Series
Complete Assy.
1/8” UP1188
1/4” UP1187
3/8” UP1586
Thumb Screw
Clamp
Stripper Only
Center Trim Stripper
Perfection Series With
Cassette Complete Assy.
1/8” UP2981
1/4” UP2982
3/8” UP2983
1/2” UP3330
Set Screw
Clamp
Stripper Only
Center Trim Deflector
B Series Complete Assy.
UP1161
Extension Plate
Thumb Screw
Clamp
Deflector Only
Edge Trim Stripper B Series
& Perfection Complete Assy.
UP1168
“L” Bracket
Plastic Triangle
Metal Triangle
Thumb Screw
Clamp
Stripper Only
Edge Trim Deflector T46/49
Complete Assy.
UP1420
Mounting Screw
Clamp
Deflector Only
Center Trim Stripper
Perfection Series
Complete Assy.
1/8” UP1986
1/4” UP1987
3/8” UP1988
Locking Screw
Clamp
Stripper Only
Center Trim Deflector
Perfection Series
Complete Assy.
UP2231
Thumb Screw
Clamp
Stripper Only
Knockout Perf Stripper B18,
B20, B118, B120, B23, B21
Complete Assy.
UP2616
Thumb Screw
Clamp
Stripper Only
30mm Dia.
Slitter Shaft
UP2619
UP1221
UP2617
UP1172
UP1162
UP1585
UP1223
UP1071
UP2954
UP2971
UP2976
UP2977
UP2972
UP2979
UP1514
UP1515
UP1218
UP1513
UP1205
UP1244
UP1206
UP1218
UP1203
UP1204
M6X20
UP1073
UP2224
UP2225
UP2226
UP2972
UP2227
UP2222
UP1218
UP1513
This Is Only A Sample Of Items Available
Edge Trim Stripper T46/49
Complete Assy.
UP1418
Thumb Screw
Clamp
Stripper Only
Edge Trim Deflector B26/32S
Perfection Complete Assy.
UP2230
Locking Screw
Clamp
Deflector Only
Edge Trim Perfection Series
With Cassette Slitter Shaft
Complete Assy.
UP3387
Side Plate
Plastic Triangle
Thumb Screw
Clamp
Stripper Only
Perforator Stripper T46/49
Complete Assy.
UP1419
Thumb Screw
Clamp
Stripper Only
Perforator Stripper Perfection
Series With Cassette
Complete Assy.
UP3333
Thumb Screw
Clamp
Stripper Only
Knockout Perf Stripper B123,
B26, B30 Complete Assy.
UP2615
UP2682
Thumb Screw
Clamp
Stripper Only
Perforator Stripper B &
Perfection Series
Complete Assy.
UP1275
Thumb Screw
Clamp
Stripper Only
Perf Stripper Low Shaft
Perfection With Cassette
Complete Assy.
UP3334
Set Screw
Clamp
Stripper Only
UP1283
UP1218
UP1203
UP2223
UP2972
UP2227
UP3386
UP3396
UP1221
UP3395
UP1284
UP1218
UP1203
UP2909
UP1221
UP2979
UP2618
UP2681
UP1221
UP2617
UP1169
UP1218
UP1203
UP2937
UP2972
UP2979
17
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Stripper Edge With Plastic Guide Strap
Stripper Edge Trim Perfection Series /
Cassette Slitter Shaft With Guide Strap
Stripper Edge Trim Plastic Triangle For
Guide Strap Perfection With Cassette
Stripper Edge Trim Guide Strap Perf
With Cassette
UP4330
UP4331
18 Pin Female To 24 Pin Male
UP2220
18 Pin Male To 24 Pin Female
UP2221
UP4332
Edge Trim Stripper For Perfection Series With
Cassette Style Slitter Shafts
Strips Waste After Knickout Shaft Eliminates
Trim Strips Backing Up Into Machine
UP4148
Drive Coupling
(A) Plastic Drive Coupling
B-123, 26, 30, 265, 305
(A) Plastic Drive Coupling
B-115, 118, 120
(B) Aluminum Drive Coupling
B-123, 26, 30, 26S, 30S
(B) Aluminum Drive Coupling
B-115, 118, 120, B20
(C) Plastic Drive Coupling T-49
3.0.5226.010
35.5226.05
3.0.5326.030
35.5326.05
1.0.5216.010
Main Drive Motor
B Series
Perfection & B Series With Inverter Drive
0103932
UP2892
Jam Detector Parts
(A) Mounting Plate
(B) Pivot Block
(C) Switch Piece
(D) Micro Switch
(E) Complete Assy
01.5544.01
4.0.5544.110
4.0.5585.060
00126565
01.5500.08
Perfection Style Casters
(A) 8, 16 Page
UP4377
(B) 8 Page Swivel With Lock UP4376
18
Electrical Plugs
(A) 4 pin male power plug
(B) 4 pin female receptacle
(C) 18 pin male control plug
(D) 18 pin female control rect.
(E) 24 pin male insert
(F) 24 pin female insert
(G) 24 pin bulk head mount
(H) 24 pin cable mount
(I) 4 pin panel mount socket
(-) 18 pin false plug
(-) 24 pin false plug
Electrical Connectors
(A) Insert 6-Pin Male 35 Amp
(B) Insert 6-Pin Female 35 Amp
(C) Electrical Hood 6-Pin 35 Amp Cable Mount
(*) Electrical Hood 6-Pin 35 Amp Bulkhead Mount
(*) Electrical Hood 6-Pin 35 Amp Surface Mount
(D) Insert 32-Pin Male 1-16
(E) Insert 32-Pin Male 17-32
(F) Insert 32-Pin Female 1-16
(G) Insert 32-Pin Female 17-32
(H) Electrical Hood 32-Pin Cable Mount
(*) Electrical Hood 32-Pin Cable Bulkhead
(*) Electrical Hood 32-Pin Cable Surface
* Not Shown
This Is Only A Sample Of Items Available
UP2250
UP2251
UP2252
UP2253
UP2333
UP2334
UP2335
UP2159
UP2346
UP2901
UP2902
UP2047
UP2048
UP2049
UP2050
UP2051
UP2052
UP2053
UP2054
UP2055
UP2056
UP2057
UP2058
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
ASP & FA Style Stacker Parts
Self Retracting Jam Switch Cable
UP4398
ASP Stacker Spring
Complete Assy
Replacement Spring
Electrical Switches & Plugs
(A) E Stop Actuator
(B) Clip
(C) Start Actuator
(D) Feed Actuator
(E) Contact Block N/O
(F) Stop Actuator
(G) Contact Block N/C
(H) Contact Block
(I) Feed Actuator
(J) E Stop Actuator
UP3875
UP3876
UP3877
UP4097
UP3878
UP3879
UP3880
UP2154.
UP4097
UP2214
Double Gate Eye
Z-2 Knife Folder Brush
(A) Z-2 Knife Folder Brush Complete
(B) Brush Only For 4621
(C) Z-2 Backstop Brush Left
(D) Z-2 Backstop Brush Right
(E) Knife Folder Rail Assy
Marble Guide For Perfection
UP4620
Side Guide
B14
B20
B23/123/26/30
B16,18,20
B-116-118-120
Round Belt FA & ASP
Flat Belt FA
00107120 Or 00107130
0106550, 0106869,
00105351 Or 00105481
Gas Shocks ASP & FA
00100160, 00100112,
00100176 Or 100124
ASP Main Motor
UP2799
Stacker Motor
UP2421
Drive Belt
00107821 Or 00105271
Speed Controls
(A) Threaded Rod & Knob 1.0.5229.020CPL
(B) Threaded Flange
1.0.5229.011
(A)
(B)
(C)
(D)
UP4386
UP4621
UP4504
UP4915
UP4916
UP4176
UP3358
UP3359
Adjustment Knob
Threaded Spindle
Stop Block
Stop Collar
Roll Hangers
B123 – B26 – B30
Roll Hanger Rollers – Stationary 2, 4
Roll Hanger Rollers 1, 3, 5
Slitter Shaft Hanger, Lower, Non Operating Side
Bearing Lever Slitter Shaft Upper Non Operating Side
Bearing Lever Slitter Shaft Lower Operating Side
Bearing Lever Slitter Shaft Upper Operating Side
B26S – 30S – 32S – Perfection Series
Bearing Lever Rollers Stationary 2, 4, 6
Bearing Lever Rollers 1, 3, 5
Telescoping Guide 23, 123, 26, 30
Replacement Spring
UP1310
UP1698
1.0.4263.330
35.4263.03
35-4262-.07
This Is Only A Sample Of Items Available
35.4230.01
1.0.7129.320
35.7144.05
1910DIN705
1.0.5312.331
1.0.5312.311
1.0.5312.300
1.0.5312.310
5.0.5312.102
1.0.5312.320
1.0.5311.000
17.5311.01
UP4411
UP2360
Smoother Bar 23, 123, 26, 30
Replacement Spring
UP2428
UP2360
Plastic Cross Carrier Smoother
01.7264.00
19
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Standard Edge Trim Kits
UP1026
Replacement
Blade
SS753
Replacement
Trim Ring
UP1017
Replacement
Die Block
UP1025
Replacement
Blade Holder
UP1019
Stripper
Assy
UP1418
Replacement
Stripper Only
UP1283
UP1215
SS753
UP1017
UP1025
UP1019
UP1168
UP1244
UP1391
UP1981
MN400
MN400
UP1030
UP1030
UP1038
UP1038
UP1032
UP1032
UP1168
UP1168
UP1244
UP1244
UP3309
MN400
UP1030
UP1038
UP1032
UP3387
UP3396
Machine Model
Kit #
T46 / T49
B23, B16, B20, B116, B120, B21
30mm Shaft
B123, B26, B30 35mm Shaft
B26S, B30S, B32S Perfection Series
Perfection Series B26S, B30S, With
Cassette Slitter Shaft
Premium Edge Trim Kits
20
UP3702
Replacement
Blade
SS853
Replacement
Trim Ring
UP1017
Replacement
Die Blocks
UP1025
Replacement
Blade Holder
UP1019
Stripper
Assy
UP1418
Replacement
Stripper Only
UP1283
UP3703
SS853
UP1017
UP1025
UP1019
UP1168
UP1244
UP3704
UP3705
MN453
MN453
UP1030
UP1030
UP1038
UP1038
UP1032
UP1032
UP1168
UP1168
UP1244
UP1244
UP3706
MN453
UP1030
UP1038
UP1032
UP3387
UP3396
Machine Model
Kit #
T46 / T49
B23, B16, B20, B116, B120, B21
30mm Shaft
B123, B26, B30 35mm Shaft
B26S, B30S, B32S Perfection Series
Perfection Series B26S, B30S, With
Cassette Slitter Shaft
This Is Only A Sample Of Items Available
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Knife To Knife “Scissor Action” Edge Trim Kits
SS853
Replacement
Trim Ring
Narrow
UP1017
Replacement
Trim Ring
Wide
UP12983
UP3703
SS853
UP1017
UP3704
UP3705
MN453
MN453
UP3706
MN453
Machine Model
Kit #
Replacement
Blade
T46 / T49
B23, B16, B20, B116, B120, B21
30mm Shaft
UP3702
B123, B26, B30 35mm Shaft
B26S, B30S, B32S Perfection Series
Perfection Series B26S, B30S, With
Cassette Slitter Shaft
Replacement
Blade Holder
Stripper
Assy
Replacement
Stripper Only
UP1020
UP1418
UP1283
UP1298
UP1020
UP1168
UP1244
UP1030
UP1030
UP1191
UP1191
UP1033
UP1033
UP1168
UP1168
UP1244
UP1244
UP1030
UP1191
UP103
UP3387
UP3396
Standard Center Trim Kits
Machine Model
T46 / T49
B23, B16, B20, B115,
B118, B120
B123, B26, B30
B26S, B30S, B32S
Perfection Series
B26S, B30S,
W/Cassette Slitter Shaft
Kit #
1/8” UP1721
1/4” UP1722
3/8” UP1723
1/2” UP1724
1/8” UP1725
1/4” UP1726
3/8” UP1727
1/2” UP1728
1/8” UP1406
1/4” UP1407
3/8” UP1408
1/2” UP1409
1/8” UP1978
1/4” UP1979
3/8” UP3874
1/2” UP1980
1/8” UP3321
1/4” UP3322
3/8” UP3323
1/2” UP3324
Replacement
Blade Holder
Upper
UP1020
UP1020
UP1508
UP1508
UP1020
UP1020
UP1508
UP1508
UP1033
UP1033
UP1193
UP1193
UP1033
UP1033
UP1193
UP1193
UP1033
UP1033
UP1193
UP1193
Replacement
Die Block
Replacement
Trim Rings
X2
UP1025
UP1017
UP1025
UP1017
UP1038
UP1030
UP1038
UP1030
UP1038
UP1030
Replacement
Spacer
UP1146
UP1145
UP1309
UP1308
UP1146
UP1145
UP1309
UP1308
UP1656
UP1653
UP1651
UP1649
UP1656
UP1653
UP1651
UP1649
UP1656
UP1653
UP1651
UP1649
This Is Only A Sample Of Items Available
Replacement
Knives
Stripper
Assy
Replacement
Stripper
Only
SS753
UP1421
UP1315
UP1188
UP1187
UP1586
UP1586
UP1188
UP1187
UP1586
UP1586
UP1986
UP1987
UP1988
UP1988
UP2981
UP2982
UP2893
UP3100
UP1172
UP1162
UP1585
UP1585
UP1172
UP1162
UP1585
UP1585
UP2224
UP2225
UP2226
UP2226
UP2954
UP2971
UP2976
UP2977
SS753
SS400
MN400
MN400
21
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Knife To Knife Center Trim Kits
Machine Model
Kit #
B26S, B30S,
Perfection Series
With Standard Slitter
Shaft
1/8” UP1706
1/4” UP1707
3/8” UP1708
1/2” UP1709
1/8” UP1983
1/4” UP1984
3/8” UP3852
1/2” UP1985
B26S, B30S,
Perfection Series,
With Cassette Slitter
Shaft
1/8” UP3313
1/4” UP3314
3/8” UP3315
1/2” UP3316
B123, B26, B30
Replacement
Blade Holder
Lower
Replacement
Blade Screw
Replacement
Trim Rings
X2
UP1044
UP2465
UP1191
UP1044
UP2465
UP1191
UP1044
UP2465
UP1191
Replacement
Spacer
Replacement
Knives
Stripper
Assy
UP16337
UP1656
UP1147
UP1651
UP1637
UP1656
UP1147
UP1651
All 1/8” Kits
Use 2
MN353
Knives On
Top And 2
UP1486
Knives On
Bottom
UP1188
UP1187
UP1586
UP1586
UP1986
UP1987
UP1988
UP1988
Replacement
Stripper
Only
UP1172
UP1162
UP1585
UP1585
UP2224
UP2225
UP2226
UP2226
UP2981
UP2982
UP2983
UP3100
UP2954
UP2971
UP2976
UP2977
UP1637
UP1656
UP1147
UP1651
All Other
Kits Use 4
UP1486
Spine Perf Kit
Unique Desighn Has Opposing Bevels To Perforate
Backbone Allows Air To Escape Yet Retains Strength
So Signatures Don’t Tear Apart
Prevents Sheet “Stretching” At Corners Of Signature
Maintains Hook Ups
Lower Female Die Has 4 Grooves For Long Life
35 Mm Shaft Size B & Perf Ser. W/O Cassette
35 Mm Shaft Size Perf Ser. With Cassette
22
This Is Only A Sample Of Items Available
UP4130
UP4131
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Signature Scoring – Provides Quality Scoring – No “Bird Wings” – No Sheet Tearing
Complete Kit
25mm Shaft
UP3290
30mm Shaft
UP3291
35mm Shaft
UP3292
Replacement Tires
25mm Shaft
UP1948
30mm Shaft
UP2380
35mm Shaft
UP1936
Replacement Score Blades
25mm Shaft
SS222
30mm Shaft
SS163
35mm Shaft
UP2709
Cover Scoring – Good – Adjustable Lower Collar To Control Score Depth – Split Lower
Spacers – Gives Score On Heavy Paper
Complete Kit
25mm Shaft
UP3390
30mm Shaft
UP3391
35mm Shaft
UP3392
Replacement Urethane Wheel
25mm Shaft
UP1001
30mm Shaft
UP1017
35mm Shaft
UP1030
Replacement Score Blades
25mm Shaft
SS222
30mm Shaft
MS537
35mm Shaft
SS083
Cover Scoring – Better – Gives Quality Letterpress Score On Most Stocks
Complete Kit
25mm Shaft
30mm Shaft
35mm Shaft
Replacement Score Blades
25mm Shaft
Thin
Thick
30mm Shaft
Thin
Thick
35mm Shaft
Thin
Thick
UP1906
UP2273
UP1701
UP1738
UP1751
UP2142
UP2143
UP1909
UP1910
Ultimate Score
Letter Press Scores On All Stock
Convenient Color Coded Score Blades Makes It Easy To Select Proper Width
Multiple Micro Perf And / Or Scores Down To 1/4” Center To Center, Great For Perfect
Bound Books Or Tear-Out Pages
Deluxe Kit Allows For Perf Score In Single Pass Or Multiple Scores
Includes .025, .030, .035, Wide Score Blades
Deluxe Kit Includes Color Coded Spacers For Quick Set-Up
Standard Kit
30mm Shaft UP3295
35mm Shaft UP3296
Deluxe Kit
30mm Shaft
B Series UP3298
T Series UP4133
35mm Shaft
B & Perfection Series UP3299
35mm Shaft
B & Perfection Series With Cassette UP4134
Score Blade
Blue
Black
Red
30mm Shaft
UP3301 UP3304 UP3307
35mm Shaft
UP3302 UP3305 UP3308
Upgrade Ultimate Score Kit
Perf Upgrade Kit
Deluxe Upgrade Kit
30mm Shaft
UP4224
UP4226
35mm Shaft
UP4225
UP4227
This Is Only A Sample Of Items Available
23
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
MBO Folder Parts
Glue Nose Assembly
New Design Allows Complete Inner Width Adjustment Of Fold Plate
For Thin Paper
Rugged Plate Adjustment-Long Wearing
Segments Easily Adjustable Without Removing Fold Plate
No Need To Remove For Regular Folding
B-118
B-20/B-120
B-23
B-26 16 Page
B-26S 16 Page
B-30S
T-65
UP2563
UP2107
UP3069
UP4222
UP4454
UP3345
UP4310
B-123
B-21
B-26
B-26S
B-30
T-49
UP2197
UP3857
UP2198
UP3344
UP2026
UP2636
Replacement Segment For Glue Rolls & Plates
(A) B-26-30 4.3” Long
UP2965
(B) B-26-30 2.874” Medium
UP2964
B-120 3” Medium
UP2105
(C) B-26-30 1.437” Short
UP2963
B-120 2” Short
UP2104
“Lil Shermy” Panzer Wheel Weights
Specifically Designed For Work 2 1/2” & Smaller. The New Up Close “Lil
Shermy” Eliminates The Problems Of Inserting, Shingle Stacking, And Lack
Of Drive Common With Pharmaceutical Type Folds. Adjustable Angled Front
Entrance Wheel Allows Operator To Maintain Complete Control Of Signature
From Exit Rollers To Stacker.
One Wheel Standard Wheel Assy
UP2256
Mounting T For Muller
UP1663
Replacement Belt
UP2280
Lil Shermy Weight Base
UP4901
Lil Shermy Additional Weight
UP4902
Complete Rollers
B-123
B-120
B-23
B-26 16 Page
B-26S 16 Page
B-30S
T-65
UP2270
UP2944
UP2695
UP2722
UP4218
UP3349
UP4322
Replacement Segments For Glue Rollers
B-20/120
UP3350
B123/26/30/26S/30S UP3352
B-20
B-21
B-26
B-26S
B-30
T-49
UP3002
UP3347
UP1964
UP3348
UP2452
UP2524
T-49/B-23
UP3351
Panzer Wheel Weights
Greatly Assists Stacking Of Smaller Signatures Or Bulky Folds
One Wheel Standard Wheel Assy
Mounting T For Muller
Replacement Belt
Panzer Weight Base
Panzer Additional Weight
UP1313
UP1663
UP1329
UP4899
UP4900
Wet Score System
● Replaces Steel Scores ● Faster Make-Ready ● Sharper Cleaner Folds ● Can Be Easily Moved ● 2 Models To
Choose From, One For Every Budget ● Can Run Up To 4 Score Lines From Single Tank ● Micro-Adjustment On
Head For Ease Of Make-Ready ● 3 Different Size Needles For Different Applications ● Decreases Packing Cost.
Product Lays Flatter Taking Up Less Space ● Includes Tank, Two Water Score Arms And All Other Standard Parts
Model 100M2 Manual Shut Off
Model 100EAU2 Auto Electric Controlled (Controlled By Electronic Sheet Sensor)
Accessories
Mounting Bar Kit 30” & Smaller Machines
100STMB
Mounting Bar Kit 32” & Larger Machines
100STMB
Additional Score Arm Assembly
100XTRA
Replacement Needles
18 GA X 1”
99HS040
20 GA X 1”
99HS041
18 GA X 2”
99HS070
20 GA X 2”
99HS071
24
This Is Only A Sample Of Items Available
22 GA X 1”
99HS042
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Perforators
Shaft
Size
20mm
20mm
20mm
20mm
20mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
5mm
35mm
35mm
35mm
Description
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Round Split Perf
Split Perf
Round Split Perf
Knockout Perf
Split Perf
Split Perf
Split Perf
Split Perf
Round Split Perf
Reverse Teeth Split Perf
Split Perf
Crimping Perf
Splitperf
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
V Shaped Split Perf
Split Perf
Round Split Perf
Split Perf
V Shaped Split Perf
Special Split Perf
Round Split Perf
Split Perf
Split Perf
Knockout Perf
Split Perf
Reverse Teeth Split Perf
Split Perf
Knockout Perf
Split Perf
Knockout Perf
Knockout Perf
Knockout Perf
V Shaped Split Perf
Split Perf
Round Split Perf
Split Perf
Reverse Teeth Split Perf
Split Perf
Split Perf
Split Perf
Reverse Teeth Split Perf
Split Perf
V Shaped Split Perf
V Shaped Split Perf
Crimping Perf
Split Perf
Split Perf
Split Perf
Split Perf
V Shaped Split Perf
V Shaped Split Perf
Split Perf
Split Perf
Split Perf
Number
Of Teeth
10T
15T
40T
58T
60T
8T
9T
10T
10T
10T
12T
12T
15T
15T
15T
15T
18T
20T
24T
30T
40T
40T
50T
60T
60T
72T
72T
5T
6T
6T
8T
8T
8T
10T
10T
12T
12T
12T
12T
12T
12T
12T
12T
12T
15T
15T
16T
16T
18T
18T
18T
18T
18T
18T
18T
24T
28T
28T
30T
30T
30T
32T
36T
40T
45T
Od
Mm
39
39
37.5
42
37.5
44.5
48
48
48
50.5
48
48
45.5
48
48
48
48
47
48
48
45.5
48
45.5
45.5
48
45.5
48
62
62
62
61.5
61.5
62
62
62
62
62
62
62
64
64
64
64
62
62
62
62
62
60
62
62
62
64
62
62
62
60
61.5
62
64
62
62
60
62
61.5
This Is Only A Sample Of Items Available
Id
Mm
26
26
26
26
26
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
Thickness
Mm
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
1.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
1.2
0.5
0.9
1.2
1.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
Part#
200-750-06-00
200-750-05-00
217-636-01-00
SP829
217-636-02-00
200-771-02-00
200-761-01-00
200-750-02-00
200-766-01-00
213-038-01-00
205-485-01-00
200-759-05-00
200-750-03-00
205-980-02-00
200-766-03-00
SP828
200-759-03-00
213-201-01-00
205-990-01-00
200-758-02-00
200-758-03-00
200-758-04-00
SP568
200-758-05-00
200-758-06-00
SP128
200-759-0600
200-769-02-00
200-756-0700
SP720
SP538
SP228
200-756-08-00
SP502
KP378
200-749-01-00
205-978-01-00
MS292spec
KP718
MS296
213-027-01-00
KP997
213-028-01-00
226-350-01-00
200-756-09-00
200-769-01-00
SP600
SP188
SP488
200-749-02-00
200-765-01-00
205-978-02-00
MS297
226-350-02-00
SP288
273-918-01-00
SP588
210-621-01-00
MS294
SP060
200-756-01-00
200-756-02-00
200-756-12-00
200-749-03-00
200-756-04-00
25
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Perforators
Shaft
Size
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm
Description
Number
Of Teeth
48T
50T
60T
60T
80T
72TPI
80T
80T
80T
100T
100T
124T
9T
16T
18T
18T
30T
40T
70T
Split Perf
Micro Perf
Split Perf
V Shaped Split Perf
Split Perf
Micro Perf
Split Perf
V Shaped Split Perf
V Shaped Split Perf
Split Perf
Split Perf
Split Perf
Split Perf
Knockout Perf
Split Perf
V Shaped Split Perf
Split Perf
Split Perf
Split Perf
Od
Mm
60
60
60
62
60
60
62
59
60
60
61.5
60
79
81
78.5
79
78.5
78.5
78.5
Id
Mm
40
40
40
40
40
40
40
40
40
40
40
40
55
55
55
55
55
55
55
Thickness
Mm
0.5
1.0
0.5
0.5
0.5
1.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.9
0.5
0.5
0.5
0.5
0.5
Part#
SP333
SP077
200-754-06-00
200-754-05-00
200-754-04-00
SP177
SP560
200-754-03-00
SP999spec
SP338
SP777
SP608
200-748-04-00
213-031-01-00
205-981-02-00
226-349-01-00
205-981-01-00
200-748-03-00
200-755-01-00
Slitter And Score Blades
Shaft
Size
20mm
20mm
20mm
20mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
50mm
50mm
50mm
26
Description
Split Score
Split Slitter
Solid Slitter
Split Slitter
Split Score
Split Score
Split Score
Solid Score
Split Slitter
Solid Slitter
Solid Slitter
Solid Slitter
Split Slitter
Split Score
Split Score
Split Score
Split Score
Solid Slitter
Solid Score
Split Score
Split Slitter
Solid Slitter
Solid Slitter
Solid Score
Solid Slitter
Split Slitter
Solid Slitter
Solid Slitter
Split Score
Split Slitter
Solid Slitter
Od
Mm
37.5
40
40
42
45
46
47.5
47.5
48
48
48
49
50
58.8
59
59.5
60
60
60
61
62
61.5
61.5
61.5
62
64
64
64
77
78.5
79
Id
Mm
26
26
26
26
30
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
55
55
55
This Is Only A Sample Of Items Available
Thickness
Mm
0.8
0.5
1.0
0.5
0.8
0.8
0.8
1.5
0.5
1.0
2.0
2.0
0.5
0.8
0.8
0.8
0.8
1.0
1.5
0.8
0.5
0.5
1.0
1.5
2.0
0.5
1.0
2.0
0.5
0.5
2.0
Part#
200-742-11-00
200-747-11-00
226-341-01-00
SS440
200-742-04-00
SS222
SS201
SS373
200-747-01-00
226-341-02-00
205-970-05-00
SS383
SS207
SS080
200-742-12-00
200-742-09-00
200-742-06-00
SS555
200-753-01-00
200-742-05-00
200-747-03-00
MN453
226-341-03-00
SS563
205-970-01-00
200-747-05-00
SS009
205-970-02-00
200-742-08-00
200-747-07-00
205-972-01-00
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Standard Edge Trim Kits
Machine Model
Kit #
UP1012
Replacement
Blade
SS203
Replacement
Trim Ring
UP1001
Replacement
Die Block
UP1009
Replacement
Blade Holder
UP1003
Stripper
Assy
UP1167
Replacement
Stripper Only
UP1166
Stahl-O-Mat T56 & T66 Para Only
Stahl USA B20 / T49, TI 55
Stahl-O-Mat T56 & T66 8 & 16 Page
Sections, Stahl B23, B26, TF56,
TF66, TF78, TC58, TC66, TC78 Stahl
USA B24, B26, B30 & Stahl Folder
Stahl TD56, TD66, TD78
Stahl B14 / T36
Stahl TH Series
UP1041
MN400
UP1030
UP1038
UP1032
UP1167
UP1166
UP1718
UP2846
UP3311
MN400
SS202
MN400
UP1030
UP1413
UP1030
UP1038
UP1318
UP1038
UP1032
UP1320
UP1032
UP1619
UP2232
UP3339
UP1542
UP1526
UP3343
Premium Edge Trim Kits
Machine Model
Kit #
UP3697
Replacement
Blade
SS800
Replacement
Trim Ring
UP1001
Replacement
Die Blocks
UP1009
Replacement
Blade Holder
UP1004
Stripper
Assy
UP1167
Replacement
Stripper Only
UP1166
Stahl-O-Mat T56 & T66 Para Only
Stahl USA B20 / T49, TI 55
Stahl-O-Mat T56 & T66 8 & 16 Page
Sections, Stahl B23, B26, TF56,
TF66, TF78, TC58, TC66, TC78 Stahl
USA B24, B26, B30 & Stahl Folder
Stahl TD56, TD66, TD78
Stahl B14 / T36
Stahl TH Series
UP3698
MN453
UP1030
UP1038
UP1033
UP1167
UP1166
UP3699
UP3700
UP3701
MN453
SS205
MN453
UP1030
UP1413
UP1030
UP1038
UP1318
UP1038
UP1033
UP1325
UP1033
UP1619
UP2232
UP3339
UP1542
UP1526
UP3343
This Is Only A Sample Of Items Available
27
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Knife To Knife “Scissor Action” Edge Trim Kits
Machine Model
Kit #
Replacement
Blade
Replacement
Trim Ring
Wide
UP1297
Replacement
Blade Holder
Stripper
Assy
Replacement
Stripper Only
SS800
Replacement
Trim Ring
Narrow
UP1001
Stahl-O-Mat T56 & T66 Para Only
Stahl USA B20 / T49, TI 55
Stahl-O-Mat T56 & T66 8 & 16 Page
Sections, Stahl B23, B26, TF56,
TF66, TF78, TC58, TC66, TC78 Stahl
USA B24, B26, B30 & Stahl Folder
Stahl TD56, TD66, TD78
Stahl B14 / T36
Stahl TH Series
UP1013
UP1004
UP1167
UP1166
UP1042
MN453
UP1030
UP1191
UP1033
UP1167
UP1166
UP1719
UP2847
UP3312
MN453
SS205
MN453
UP1030
UP1413
UP1030
UP1191
N/A
UP1191
UP1033
UP1325
UP1033
UP1619
UP2232
UP3339
UP1542
UP1526
UP3343
Standard Center Trim Kits
Machine Model
Kit #
Stahl-O-Mat T56 & T66
Para Only
Stahl T49, T50, TX52,
USA B20, TI40 & TI55
Stahl TF, TC, & USA
& Stahl Folder
Stahl-O-Mat 8 & 16 Page,
TF56, TF66, TF78,
TC58, TC66, TC78
Stahl TD56, TD66, TD78
Stahl TH56, TH66, TH78
Stahl B14 / T36
28
Replacement
Die Block
1/8” UP1006
1/4” UP1005
3/8” UP1394
1/2” UP1395
1/8” UP1006
1/4” UP1005
1/2” UP1395
1/8” UP1035
1/4” UP1034
3/8” UP1398
1/2” UP1399
Replacement
Blade Holder
Upper
UP1004
UP1004
UP1499
UP1499
UP1004
UP1004
UP1499
UP1033
UP1033
UP1193
UP1193
UP1009
Replacement
Trim Rings
X2
UP1001
UP1009
UP1001
UP1038
UP1030
1/8” UP1712
1/4” UP1711
3/8” UP1713
1/2” UP1710
1/8” UP3325
1/4” UP3326
3/8” UP3327
1/2” UP3328
1/8” UP2848
1/4” UP2849
UP1033
UP1033
UP1193
UP1193
UP1033
UP1033
UP1193
UP1193
UP1325
UP1325
UP1038
UP1030
UP1038
UP1030
UP1318
UP1413
Replacement
Spacer
Replacement
Knives
Stripper
Assy
Replacement
Stripper Only
UP1144
UP1143
UP1304
UP1305
UP1144
UP1143
UP1305
UP1148
UP1147
UP1229
UP1230
SS203
UP1818
UP1819
UP1820
UP1821
UP2458
UP1989
UP1989
UP1155
UP1151
UP1439
UP1417
UP1154
UP1150
UP1438
UP1410
UP2457
UP1975
UP1975
UP1154
UP1150
UP1438
UP1410
UP1148
UP1147
UP1229
UP1230
UP1148
UP1147
UP1229
UP1230
UP2850
UP2852
MN400
UP1620
UP1621
UP1622
UP1623
UP3282
UP3283
UP3284
UP3285
UP2866
UP2900
UP1536
UP1537
UP1538
UP1139
UP3286
UP3286x2
UP3286x3
UP3286x4
UP2724
UP1950
This Is Only A Sample Of Items Available
SS203
MN400
MN400
SS202
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Knife To Knife Center Trim Kits
Machine Model
Kit #
Stahl TF56 & TF66,
TF78, TC58, TC56,
TC66, TC78 & Stahl
Folder Stahl-O-Mat
T56, T66 8 & 16 Page
Sections, USA
Stahl TD56 & TD66
8 & 16
1/8” UP1037
1/4” UP1036
3/8” UP1628
1/2” UP1629
Stahl TH56, TH66,
TH82
1/8” UP1702
1/4” UP1703
3/8” UP1704
1/2” UP1705
1/8” UP3317
1/4” UP3318
3/8” UP3319
1/2” UP3320
Replacement
Blade Holder
Lower
UP1044
Replacement
Blade Screw
Replacement
Spacer
Replacement
Knives
Stripper
Assy
Replacement
Stripper Only
UP2465
Replacement
Trim Rings
X2
UP1191
UP1637
UP1148
UP1147
UP1229
UP1155
UP1151
UP1439
UP 1417
UP1154
UP1150
UP1438
UP1410
UP1044
UP2465
UP1191
UP1044
UP2465
UP1191
UP1637
UP1148
UP1147
UP1129
UP1637
UP1148
UP1147
UP1129
All 1/8” Kits
Use 2
MN353
Knives On
Top And 2
UP1486
Knives On
Bottom
UP1620
UP1621
UP1622
UP1623
UP3282
UP3283
UP3284
UP3285
UP1536
UP1537
UP1538
UP1539
UP3286
UP3286x2
UP3286x3
UP3286x4
All Other
Kits Use 4
UP1486
Spine Perf Kit
Unique Desighn Has Opposing Bevels To Perforate
Backbone Allows Air To Escape Yet Retains Strength
So Signatures Don’t Tear Apart
Prevents Sheet “Stretching” At Corners Of Signature
Maintains Hook Ups
Lower Female Die Has 4 Grooves For Long Life
35 Mm Shaft Size TF, TC, TD
35 Mm Shaft Size TH
This Is Only A Sample Of Items Available
UP4128
UP4129
29
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Signature Scoring – Provides Quality Scoring – No “Bird Wings” – No Sheet Tearing
Complete Kit
25mm Shaft
UP3290
30mm Shaft
UP3291
35mm Shaft
UP3292
Replacement Tires
25mm Shaft
UP1948
30mm Shaft
UP2380
35mm Shaft
UP1936
Replacement Score Blades
25mm Shaft
SS222
30mm Shaft
SS163
35mm Shaft
UP2709
Cover Scoring – Good – Adjustable Lower Collar To Control Score Depth – Split Lower
Spacers – Gives Score On Heavy Paper
Complete Kit
25mm Shaft
UP3390
30mm Shaft
UP3391
35mm Shaft
UP3392
Replacement Urethane Wheel
25mm Shaft
UP1001
30mm Shaft
UP1017
35mm Shaft
UP1030
Replacement Score Blades
25mm Shaft
SS222
30mm Shaft
MS537
35mm Shaft
SS083
Cover Scoring – Better – Gives Quality Letterpress Score On Most Stocks
Complete Kit
25mm Shaft
30mm Shaft
35mm Shaft
Replacement Score Blades
25mm Shaft
Thin
Thick
30mm Shaft
Thin
Thick
35mm Shaft
Thin
Thick
UP1906
UP2273
UP1701
UP1738
UP1751
UP2142
UP2143
UP1909
UP1910
Ultimate Score
Letter Press Scores On All Stock
Convenient Color Coded Score Blades Makes It Easy To Select Proper Width
Multiple Micro Perf And / Or Scores Down To 1/4” Center To Center, Great For Perfect
Bound Books Or Tear-Out Pages
Deluxe Kit Allows For Perf Score In Single Pass Or Multiple Scores
Includes .025, .030, .035, Wide Score Blades
Deluxe Kit Includes Color Coded Spacers For Quick Set-Up
Standard Kit
25mm Shaft UP3294
35mm Shaft UP3296
Deluxe Kit
25mm Shaft
UP4133
35mm Shaft
TF, TC, TD Series UP3299
TH Series UP4134
Score Blade
Blue .025 Wide
Black .030 Wide
Red .035 Wide
25mm Shaft
UP3300
UP3303
UP3306
35mm Shaft
UP3302
UP3305
UP3308
Upgrade Ultimate Score Kit
Perf Upgrade Kit Deluxe Upgrade Kit
25mm Shaft
UP4229
UP4231
35mm Shaft
UP4228
UP4230
30
This Is Only A Sample Of Items Available
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Blade Holders
A Center Trim Blade Holder 1.5
B Center Trim Blade Holder 1”
B Center Trim Blade Holder 1”
C Center Trim Blade Holder
C Center Trim Blade Holder
C Center Trim Blade Holder
C Center Trim Blade Holder
D Blade Holder
D Blade Holder
D Blade Holder
D Blade Holder
35mm
30mm
35mm
20mm
25mm
30mm
35mm
20mm
25mm
30mm
35mm
Die Block & Transport Collars
A
Steel Transport Collar
A
Steel Transport Collar
A
Steel Transport Collar
B
Perf Block 2 Groove
C
Die Block
C
Die Block
C
Die Block
C
Die Block / Carbide Face
D
Trans. Collar/Urethane Steel, Pin &
Flange
E
Transport Collar / Urethane-Steel
E
Transport Collar / Urethane-Steel
E
Transport Collar / Urethane-Steel
E
Transport Collar / Urethane-Steel
W/Groove
E
Transport Collar / Urethane-Steel
E
Transport Collar / Urethane-Steel
W/Groove
20mm
25mm
35mm
35mm
20mm
25mm
35mm
35mm
35mm
20mm
20mm
25mm
25mm
35mm
35mm
UP1192
UP1508
UP1193
UP1325
203-559-BG03
UP1020
203-559-BG02
203-559-BG09
203-559-BG04
UP1019
203-559-BG01
Micro Perf
Complete Kit For 25mm Shaft
Replacement Blade 25mm
Replacement Mandrel 25mm – Sleave
Complete Kit For 35mm Shaft
Replacement Blade Standard 35mm
Replacement Blade 50TPI 35mm Only
Replacement Mandrel 25mm – Sleave
UP2234
UP2235
UP3609
UP2032
UP2033
UP2116
UP3546
Slit Score Kit 25mm Shaft
Replacement Blade 25mm Shaft
Slit Score Kit 35mm Shaft
Replacement Blade 35mm Shaft
UP4871
UP4874
UP4873
UP4876
203-558-BG-11
203-558-BG05
203-558-BG02
202-845-BG04
203-558-BG12
203-558-BG06
203-558-BG03
274-257-0100
202-845-BG02
203-558-BG10
233-530-BG01
203-558-BG04
213-186-0100
203-558-BG01
Infinity Die Block
Made from the highest grade tool steel
Double sided for longer life
Minimal surface contact between knife and die
block to reduce heat build up to extend life of
cutting edge
No need to change blocks on long run jobs
Will out last standard die blocks 3-5 times
For 35mm shaft only
UP3683
217-530-0100
Urethane Die Block
Urethane Control Ring Molded Directly Into Cutting
Collar For Ultimate Sheet Control. Thin Design Allows
Placement On Extreme Edge Of Folder. For 35mm Shaft
Only.
222-230-BG-01
Register Board Drive Shaft
B-14
204-495-1200
USA B-20
261-796-0100
SOM T56
204-495-1000
SOM T66
204-495-1100
TF-56
216-348-0500
TF-66
216-348-0400
TF-78
216-348-0200
USA 24/26
263-445-0100
Drive Shaft
Handwheel Shaft TF56 MFG. Before 1-85
TF66 MFG. Before 1-85
TF56 MFG. 1-85 Thru 10-88
TF66 1/85 Thru 10-88
TF56 11-88 To Present
TF66 11-88 To Present
This Is Only A Sample Of Items Available
214-914-BG08
214-914-BG07
219-221-BG04
219-221-BG03
228-519-0400
228-519-0300
31
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Fold Plate Stops
(A) 215-988-BG03
(B) 217-680-BG01
(A) 215-988-BG04
(C) FH1070421/02
Delivery Wheel Assembly
A
Wheel Assy Complete 135mm Wheel
135 Wheel Only
B
Wheel Assy Complete 100mm Wheel
100mm Wheel Only
C
Spring
D
Stacker Wheel Rod Clamp Mbo
E
Stcker Guide Holder
F
Collar
G
Stacker Wheel Rod Clamp Stahl
H
Roll Bushing
Crowned Stacker Pulleys
A 25mm Bore X 20mm Wide Tape
B 25mm Bore X 40mm Wide Tape
Used To Convert 20mm To 40mm Tapes
C 30mm Bore X 40mm Wide Tape
Variable Speed Pulleys
(A) Mechanical 24mm Bore
(B) Spring 1 Side 19mm Bore
(C) Spring 2 Sides 19mm Bore
(D) Spring 2 Sides 24 Mm Bore
(D) Spring 2 Sides 24 Mm Bore
(E) Spring 2 Sides 24 Mm Bore
(F) Variable Speed Pulley Shaft TF56
(F) TF66 Shaft
32
Marble Carriers
T56/66SOM
TF56/66/78 Cont.
T49/50/TX52
TC66
TC66
TF56/66/78 Pile
202-278-BG03
204-009-0100
202-278-BG01
202-283-0100
202-280-0100
UP1826
205-684-0100
202-279-0100
202-286-0100
200-671-0100
205-685-0100
UP1265
221-545-0100
209-572-0100
211-162-0100
207-841-0100
225-377-0200
225-520-0100
225-377-0100
218-581-0100
218-581-0200
213-345-0100
217-961-0100
210-201-0100
229-895-0100
229-896-0100
221-178-0100
Marble Cups
24mm
35mm
35mm
206-773-0200
206-774-0200
261-022-0100
Marbles
20mm Plastic
20mm Steel
24mm Plastic
24mm Steel
24mm Glass
25mm Plastic
25mm Steel
25mm Glass
35mm Plastic
35mm Steel
35mm Glass
200-634-0100
200-132-0400
200-634-0200
200-132-0500
261-022-0100
UP1091
UP1092
261-022-0100
200-634-0300
200-132-0600
261-022-0100
Crosscarrier Guide Spring
227-361-BG09
227-361-BG10
Deflectors
T36/B14
T47
TX52
T49
T56 Stahl-O-Mat Parallel Section
T56 Stahl-O-Mat Parallel Section
T66 Stahl-O-Mat Parallel Section
T66 Stahl-O-Mat Parallel Section
T56 Stahl-O-Mat 8, 16 & 32 Page Sec., Early Model
TF SERIES WITH FIXED DEFLECTOR
T66 Blue Line, Stahl-O-Mat 8 Page, Early Model TF
Series With Fixed Deflector
TF78 Fixed Deflector
TF56, TD56
TF66, TC66, TD66
TF78, TD78
Universal Joint
U-Joint
Bearing – 4 Required
Spacer
Spacer
This Is Only A Sample Of Items Available
217-570-0100
211-774-0100
225-335-0100
211-774-0200
200-362-1100
219-252-0400
219-252-0100
200-362-0400
200-362-0300
200-362-0500
200-362-0200
224-697-0200
224-697-0100
224-697-0G00
218-346-0100
213-953-0100
203-975-1100
203-975-1200
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Slitter Shafts
T-36/B-14
T-I 36
T56 Stahl-O-Mat Parallel
T66 Stahl-O-Mat Parallel
TX-52
T-56 Stahl-O-Mat 8 & 16 Page
T-66 Stahl-O-Mat 8 Page
TF-56/56.2 Flex-O-Mat
TF-66/66.2
TF-78/78.2
TF-56.3/TC56/TD56
TF-66.3/TC66/TD66
TF-78.3/TC78.3/TD78
TH-82
20mm
20mm
25mm
25mm
25mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
218-426-BG01/2
FH1012230/02
203-444-BG22
203-444-BG19
225-545-BG01
203-444-BG23
203-444-BG20
203-444-BG23
203-444-BG20
203-444-BG25
234-006-BG01
234-006-BG03
231-854-BG04
FH1077540
Stub Shaft Drive Coupling For T & TF Series
(A) CirClip
(B) Ball Bearing
(C) Spacer
(D) Bearing
(E) Stub Shaft
(E) Stub Shaft
(E) Stub Shaft
(F) Drive Coupling
Stub Shaft Drive Coupling For B-14
(A) Bearing
(B) Stub Shaft
(C) Drive Coulping
(*) Circlip (Not Shown)
(*) Spacer (Not Shown)
Stub Shaft Drive Coupling For TF, TC, TD & USA
(A) Cup Washer
(B) Circlip
(C) Bearing
(D) Stub Shaft
(D1) Stub Shaft
(E) Drive Coupling
200-104-0100
213-593-0100
203-975-0800
213-592-0100
211-432-0100
234-128-Bg01
225-367-Bg01
UP1137
200-584-0700
218-410-0100
UP1700
200-104-1100
200-972-1900
200-637-0200
200-104-1400
213-535-0100
234-007-Bg-01
FH1096630/01
UP1442
Slitter Shaft Removable Ends TF56.3, 66.3, TD & USA
(A) Slitter Shaft Ends
231-927-0100
(B) Compression Sleeve
215-908-0100
(C) End Cap
213-741-0100
Slitter Shaft Removable Ends TF & SOM
(A) Slitter Shaft Ends TF
(B) Slitter Shaft Ends SOM
Kick Out Shaft Removable Ends
(A) Ball Bearing
(B) Bearing Bolt
(C) Compression Sleeve
(D) End Cap
216-052-0100
202-787-0100
Slitter Shaft Removable Ends B14
(A) Slitter Shaft Ends
(B) Compression Sleeve
(C) End Cap
(D) Allen Cap Screw
218-402-0100
215-908-0200
218-403-0100
200-051-1600
Stub Shaft, Bearings, Drive Couplings Exit Shaft
(A) Ball Bearing
(B) Spacer
(C) Ball Bearing
(D) Bearing Flange
(E) Drive Bolt
(E) Drive Bolt
(F) Drive Bolt
212-593-0100
203-975-0200
213-593-0100
231-763-0100
231-764-BG01
FH1096630/01
FH1135280
213-592-0100
231-731-0100
231-796-0100
231-732-0100
Kick Out Shaft
TF-56 45mm Shaft
TF-66 45mm Shaft
TF-78 45mm Shaft
TF-56 25mm Shaft
TF-66 25mm Shaft
TF-78 25mm Shaft
TH-82 25mm Shaft
231-728-BG01
231-728-BG02
231-728-BG03
231-978-BG01
231-978-BG03
231-978-BG04
FH1096830
This Is Only A Sample Of Items Available
33
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
Poly V-Belts
200-437-0100
200-437-0200
201-465-0100
201-466-0100
201-467-0100
219-101-0100
212-067-0100
219-101-0400
231-646-0100
31237
201-463-0100
300J12
300J8
261-314-0100
Cogged Drive Belts
Cogged Drive Belts
Cogged Drive Belts
Cogged Drive Belts
Cogged Drive Belts
Cogged Drive Belts
208-450-0100
213-551-0100
200-620-0100
200-620-0400
200-620-0200
22X8X550
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
V-Belts
200-594-0800
200-594-5000
201-192-0100
200-594-7000
200-592-2100
201-191-0100
200-594-4900
200-594-0200
200-594-0100
200-594-2800
200-594-7900
200-594-0800
200-594-4100
267-654-010
20756
261-473-0100
Timing Belts
Timing Belts
Timing Belts
Timing Belts
Timing Belts
Timing Belts
Timing Belts
Timing Belts
Timing Belts
Timing Belts
203-416-0200
203-473-0600
203-473-1100
203-473-1200
203-473-1300
203-473-1400
220-691-0100
237-438-0100
110XL037
235-737-0100
Round Belts
Round Belts
Round Belts
Round Belts
Round Belts
Round Belts
221-060-0100
221-060-0200
201-890-0700
201-890-1300
212-772-0300
201-560-1700
Cross
Cross
Cross
Cross
34
Carrier Belts
Carrier Belts
Carrier Belts
Carrier Belts
201-190-0500
212-164-0100
201-190-0100
201-190-1100
Infeed Belts
T36/B14
USA B-20
T47/49
T56/66 SOM
TF56/6678 Pile Feed
TF56/66/78 Continuous
TC58/66
TD56/66/78
B24/26
B24/26
TF56/66/78 Continuous Hd
B24/26 HD
TH56, 66, 82
1235X30X1.2
1990X50X1.2
2260X50X1.2
2280X50X1.2
2353X50X1.2
2920X50X1.2
2734X50X1.2
2740X50X1.2
2873X50X1.2
2873X50X1.2
2920X50X1.4
2873X50X1.4
25X2700
221-056-0100
260-318-0100
200-626-1300
200-626-0500
200-626-0200
200-626-2000
200-626-2200
232-798-0300
262-723-0100
267-731-0100
200-626-2000
267-731-0100
FH1107871
Transfer Table Belts
B14
220-554-0100
TF56
200-624-6100
TF56
200-624-6400
Stacker Belts
225-331-0100
225-331-0200
212-588-0100
221-605-0100
200-624-3300
211-874-0200
211-874-0100
Knife Folder Belts & Transport Belts
Transport Belt
VFZ-52
VFZ-52
VFZ-43
VFZ-43
Drive Belt
VFZ
VFZ
Timing Belt
VFZ
This Is Only A Sample Of Items Available
Continuous Feeder
Transport Cloth Belts
213-447-0100
213-447-0200
213-447-0300
213-447-0400
220-037-3800
225-627-0200
220-037-3300
220-627-0100
225-631-0100
201-461-0200
225-632-0100
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Stripper Assemblies
Stripper Assemblies
Center Trim Stripper Assy
Stahl-O-Mat Parallel Section
1/8” UP1818
1/4” UP1819
3/8” UP1820
1/2” UP1821
Thumb Screw
Clamp
Spacer
Stripper Only
Center Trim Stripper Assy
TF Series
1/8” UP1155
1/4” UP1151
3/8” UP1439
1/2” UP1417
Thumb Screw
Clamp
Stripper Only
Center Trim Stripper Assy
TH Series
1/8” UP3282
1/4” UP3283
3/8” UP3284
1/2” UP3285
Thumb Screw
Clamp
Stripper Only
Center Trim Stripper Assy
Stahl SOM, TF, TC Series
1/8” UP2501
1/4” UP2077
Thumb Screw
Clamp
Stripper Only
Center Trim Stripper Assy
TH Series
1/8” UP3336
1/4” UP3337
3/8” UP3338
1/2” UP3339
Thumb Screw
Clamp
Center Trim Stripper Assy
T36/B14 / TI 36 Series
UP2232
Thumb Screw
Clamp
Center Trim Stripper Assy
TD Series
1/8” UP1620
1/4” UP1621
3/8” UP1622
1/2” UP1623
Thumb Screw
Clamp
UP1154
UP1150
UP1438
UP1410
UP1469
UP1070
UP1895
UP1154
UP1150
UP1438
UP1410
UP1469
UP1070
UP3286
UP3286x2
UP3286x3
UP3286x4
UP1218
UP3335
UP2499
UP2078
UP1225
UP1070
Stripper Only
UP3340
UP3340x2
UP3340x3
UP3340x4
UP1218
UP3335
Stripper Only
Center Trim Stripper Assy
B-14/T36/TI 36
1/8” UP2866
1/4” UP2900
Thumb Screw
Clamp
Stripper Only
Center Trim Stripper Assy
B-20/TI Series
1/8” UP2458
1/4” UP1989
Thumb Screw
Clamp
Stripper Only
Edge Trim Stripper Assy
Stahl-O-Mat, B-20
TF & TC Series
UP1167
Thumb Screw
Clamp
Stripper Only
Edge Trim Stripper Assy
TD Series
UP1619
Thumb Screw
Clamp
Stripper Only
Edge Trim Stripper Assy
TH Series
UP3339
Thumb Screw
Clamp
Stripper Only
Perf Stripper 25mm Shaft
Stahl-O-Mat, B-20, TI Series
UP1175
Thumb Screw
Clamp
Stripper Only
Perf Stripper 35mm Shaft
UP1177
Thumb Screw
Clamp
Stripper Only
UP1174
UP1225
UP1070
UP2724
UP1950
UP1223
UP2320
UP2457
UP1975
UP1226
UP1070
UP1166
UP1225
UP1103
UP1542
UP1225
UP1196
UP3343
UP1218
UP3335
UP1176
UP1225
UP1103
UP1526
UP1218
UP1069
Stripper Only
UP1536
UP1537
UP1538
UP1139
UP1226
UP1070
This Is Only A Sample Of Items Available
35
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Stripper Assemblies
Perf Stripper 20mm Shaft
T36/B-14, TI 36
UP3287
Thumb Screw
Clamp
Stripper Only
Knockout Perf Stripper
TH Series
UP3289
Thumb Screw
Clamp
Stripper Only
Knockout Perf Stripper
TF Series
UP2864
Thumb Screw – Side
Thumb Screw - Top
Clamp
Stripper Only
Stahl T, TF, & TC Series
UP1444
Knockout Perf 35mm Shaft
TD Series
UP4378
Universal Center Trim
Stripper
UP3288
UP1225
UP1069
UP3210
UP1218
UP3211
UP2798
UP1226
UP1218
UP3093
UP3240
Jockey Wheels And Pulleys
A
Pulley 10 Groove Poly-V
B
Pulley 8 Groove Poly-V Drive
C
Pulley 8 Groove Poly-V
D
V-Belt Idler Pulley/Jockey Pulley
E
Jockey Wheel Assembly
E
Jockey Wheel Assembly
F
Pulley 8 Groove
G
Belt Tens. Assy Stahl USA B-20
H
Belt Tensioner Pulley Only
N/S Bearings For Belt Tensioner
Pull-Out Wheel Assemblies
Blue Line, Stahl-O-Mat, Flex-O-Mat & TC Series
TD Series
B-14, T-36 Transfer Table
TH Series
*UP1102 Rebuild Kit
*UP3254 Rebuild Kit
*UP1683 Rebuild Kit
UP2621 Replacement Tire
UP1102, UP3254 & UP1683 Replacement Tire
214-821-0500
200-738-0100
200-739-0100
200-177-0100
200-799-0100
200-799-0200
218-542-0100
203-425-BG24
218-493-0100
200-584-0700
UP1102
UP1683
UP2621
UP3254
UP1107
UP3380
UP1785
UP2661
UP1108
*Rebuild Kits Include Upper & Lower Arm, New Spring & All Hardware
Slitter Rings
Special Designed Slitter Rings Allow You To Do Multiple Perfs Or Many
Combinations Of Perf-Score-Perf/Perf-Split Perf. All The While Using
Standard Blade Holders And Tooling. Run Perf Lines As Close As 4mm Apart.
Fits 35mm Shaft. Can Be Used On Both Sides.
UP4720
36
Side Blower Parts
A
Thumb Screw
B
Clamp Handle
C
Clamp Handle Old Style
C
Clamp Handle New Style
D
Clamp Lever Nut
This Is Only A Sample Of Items Available
200-070-0300
212-200-0100
200-627-0100
200-627-0200
229-530-0100
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Vacuum Parts
AA Narrow Alluminum
BB Wide Urethane Coated
BB Wide Urethane Coated
CC Wide Aluminum
O Ring Stahl B-14/Vacuum Wheel
O Ring/Vacuum Wheel
200-960-BG01
228-146-0100
FH1066561/02
233-002-0100
203-508-1200
203-508-0600
Tremat Parts
A
Side Blower Assy
B
Bushing
C
Choke Plate
D
Suction Element
E
Guide Bracket
F
Reflex Head
F
Reflex Head
G
Brush Only
H
Sheet Separator
I
Sucker Carrier
J
Vacuum Bushing
K
Solenoid 24vdc
K
Solenoid 15vdc
L
Reflex Head
M
Cable For Reflex Head
N
Sucker Disc
O
Carrier Spring
P
Flat Spring
Q
O-Ring
R
Suction Element Spring
S
Hose Complete
T
Microswitch
U
Choke Plate Spring
V
Lifting Part Suction Element
W
Spring Lifting Part
X
Spacer
Y
Angle Piece Complete
Z
Brush Holder
AA Spring – Brush Adjusting
BB Knurled Screw
CC Double Sheet Wedge
DD Clamp Lever
EE
Block Pile Sensor Mtg
FF
Rubber Cap
GG Vacuum Bushing
221-874-BG02
UP1521
218-906-BG01
221-145-BG01
212-350-BG01
217-580-BG01
261-438-0100
212-334-BG01
232-911-BG01
212-349-0100
204-278-0100
203-271-0100
230-511-0100
215-477-0200
UP2803
214-170-0100
214-171-0100
212-273-0100
203-508-0700
218-870-0100
214-197-BG01
210-989-0100
214-208-0100
212-302-0100
216-296-0100
216-295-0100
212-348-BG01
216-317-0100
214-209-0100
213-533-0100
212-271-0100
262-027-0100
260-485-0100
210-021-0100
288-207-0100
Pre Wired Tremat Micro Switch Exchange
Includes New Micro Switch
Switches Adjusted & Ready To Use
Easy Field Replacement
Exchange Yours For A Ready To Go
UP2397
This Is Only A Sample Of Items Available
37
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Continuous Feeder Parts
A
Foam Ring 100mm Wheel
A
Foam Ring 135mm Wheel
B
Side Blower Assembly
C
Feeder Drive Motor
D
Gear Box Only
E
Replacement Spring For Blower Rh
E
Replacement Spring For Blower Lh
F
Replacement Bearing For Blower
G
Plunger Valve
H
Sheet Guide
I
Feeder Motor Control Board
J
Cont. Feeder Table Extension Belt
J
Cont. Feeder Table Extension Belt
J
Cont. Feeder Upper Belt TF-56
J
Cont. Feeder Upper Belt TF-66/78
J
Cont. Feeder Upper Belt USA 26
J
Cont. Feed Drum Belt TF56/66/78 80mm
J
Cont. Feed Drum Belt TF56/66/78 40mm
J
Cont. Feed Drum Belt USA 26 40mm
K
Cont. Feeder Belt Lower Table TF-56
K
Cont. Feeder Belt Lower Table TF-66
K
Cont. Feeder Belt Lower Table TF-78
K
Cont. Feeder Belt Lower Table USA
L
Suction Length Switch 4 Wire
M
Suction Length Switch B-14/T-36
N
Sheet Spacing Potentiometer
N
Sheet Spacing Potentiometer (Double)
O
Foam For Back Stop Wheels By The Ft
P
Motor Brusher For 203-464-0100
Q
Double Sheet Wedge
R
Gas Shock
S
Continuous Feeder Drive Chain
T
Continuous Feeder Sprocket
U
Continuous Feeder Sprocket
V
Continuous Feeder Sprocket
W
Continuous Feeder Idler Sprocket
X
Continuous Feeder Load Shaft Version A
Y
Continuous Feeder Load Shaft Version B
Z
Continuous Feeder Idler Sprocket Stud
AA Master Link
BB Clamp Lever M8X25
CC Clamp Lever Nut Square
DD Air Control Knob
EE
Continuous Feeder Sprocket Stud
FF
Side Blower Part
HH Side blower Tube
Feed Finger Retrofit Kit
UP4111
Replaces Outdated Feed Finger Circuit Boards
With Solid State Electronics
Eliminates Misfeeds – Erratic Paper
Advancements And Over Runs
Fits All Stahl Folding Machines Manufactured
From 1980
Handwheel Safety Clutch
Handwheel Clutch USA B-20
Retaing Nut Only
Key
Handwheel Complete
38
UP2192
UP2193
UP2194
UP2580
This Is Only A Sample Of Items Available
Clamp Levers
M6X20
M6X25
M8X25 Brass
M8X25
M8X25
M8X65BT
M10X50
Clamp Lever
Clamp Lever M6X50
Plate Clamp Levers
B-14/T-36
T-47, TF-56/66/78,
TD-56/66/78, USA B-24/26
USA B20
T-49
T50/52
UP2182
UP2183
221-874-BG02
203-464-0100
UP2399
221-876-0200
221-876-0100
221-875-0100
204-268-BG01
213-325-0300
227-794-0100
263-629-0100
246-761-0100
218-938-0300
218-938-0100
218-917-1200
218-917-0400
218-917-0500
218-917-1100
218-917-0700
218-917-0600
218-917-0300
262-783-0100
220-946-0200
220-945-0200
220-945-0100
UP1163
203-755-0400
212-271-0100
263-735-0100
263-928-0100
262-835-0100
264-506-0100
263-901-0100
268-674-BG01
263-451-0100
264-505-0100
263-462-0100
UP4341
200-627-0200
229-530-0100
201-350-0100
263-462-0100
UP4811
UP4812
219-327-0100
212-200-0100
222-608-0200
200-627-0100
200-627-0200
227-981-BG01
200-628-0100
200-160-0200
212-200-0300
204-306-BG08
204-306-BG01
204-306-BG09
204-306-BG05
204-306-BG07
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Cross Carrier Sheet Guide
A
B
C
D
E
F
G
Thumb Screw
Thumb Screw
Hold Down
Thumb Screw
Holddown Hollow
Clamp
2 Piece Clamp
200-613-0100
200-070-0300
205-877-0100
200-070-0200
215-349-BG03
215-345-0100
203-043-0100
A
B
C
D
E
F
G
H
Thumb Screw
Thumb Screw
Thumb Screw
Clamp
Clamp Lever
Extension Block
Holddown
Holddown Hollow
200-613-0100
200-070-0300
200-070-0200
247-023-0100
200-212-0100
209-738-BG07
205-877-0100
215-349-B603
A
B
C
D
E
F
Thumb Screw
Clamp
Clamp – Sheet Guide
Thumb Screw
Thumb Screw
Smoother Bar Solid
200-070-0200
204-179-0100
206-093-B601
200-070-0300
200-070-0900
215-346-0500
Deflector Hinges & Spring
A
211-769-0100
B
217-685-BG02
B-1
217-685-BG01
C
212-833-0100
D
217-681-0100
E
217-671-0100
Lower Pan Adjustment Parts
(A) Spring 222-421-0100
(B) Adjustment Nut 200-065-BG01
(C) Lower Pan Retaining Spring
227-567-0100
(D) Fold Plate Stud 200-052-0600
Register Board Pulleys, Idlers & Drive Belts
A
Front Idler Pulley Stahl-O-Mat
B
Jockey Wheel – SOM, TF Series
C
Rear Idler Pulley TF
D
Front Idler Pulley TF SERIES
E
Rear Idler Pulley Stahl-O-Mat
F
Tape Roll
G
Feeder Drive Belt SOM
G
Feeder Drive Belt TF Cont. Feed
G
Feeder Drive Belt TF Pile Feed
G
Feeder Drive Belt USA 24/26
H
Double Sheet Wedge
I
Double Sheet Microswitch
J
Jockey Pulley/V-Idler Pulley
K
Double Sheet Bearing TF Series
L
Double Sheet Bearing Som
M Variable Speed Pulley
N
Double Sheet Spring
O
Splined Drive Pulley
Plate Bearing Brackets
Adj. Side W/O Micro Adj.
Adj. Side W/O Micro Adj.
Non-Adj. Side SOM 1 & 3
Non-Adj. Side SOM 2 & 4
Adj Side W/Micro Adj.
Adj Side W/Micro Adj. & Hand Numeric Indicator
Non-Adj. Side TF, TC, TD 1 & 3
Non-Adj. Side TF, TC, TD 1 & 3
Non-Adj. Side TF, TC, TD 2 & 4
Non-Adj. Side TF, TC, TD 2 & 4
Adj. Side USA 20
Non-Adj. Side USA 20 1 & 3
Non-Adj. Side USA 20 2 & 4
This Is Only A Sample Of Items Available
210-195-0100
211-559-0100
216-931-0100
216-327-0100
213-259-0100
213-370-0100
213-460-0100
213-460-0500
213-460-0200
262-930-0100
213-533-0100
211-004-0200
200-177-0100
200-584-1000
200-584-0100
213-404-0100
201-354-0100
263-443-0100
212-964-0100
215-228-0100
212.965-0100
212-965-0100
230-307-0100
232-454-BG01
232-454-BG01
218-250-BG01
232-454-BG02
218-250-BG02
215-128-0100
215-129-0100
215-129-0100
39
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Roll Hangers
Stahl-O-Mat #1
Stahl-O-Mat 2-5
TF #1 Before 11/88
TF 2-7 Befor 11/88
TF #1 11/88 To Present, USA B-26/30
TF #2-7 11/88 To Present, USA, B-26/30
Graduated Ring
Thrust Plate
Spring
Steel Ball
Roll Hanger
Operator Side Handwheel Shaft Hanger
Non Operator Side Handwheel Shaft Hanger
Operator Side Main Roll Hanger
Non Operator Side Main Roll Hanger
202-794-0100
207-800-0100
218-968-BG01
219-214-BG02
219-214-BG03
219-214-BG04
201-159-0100
201-482-0100
201-276-0100
200-132-0300
219-214-BG07
228-513-0100
228-512-0100
228-510-0100
228-511-0100
Slitter Shaft Hanger Parts
A
Hanger Pin For 231-919-0100
A
Hanger Pin For 231-893-0300
B
End Cap
C
Compression Sleave
D
Bearing Bolt For Belt Shaft
E
Hanger Slitter Shaft Removable TF/TC/TD
F
Hanger Slitter Shaft Gear Side TF/TC/TD
G
Hanger
H
Hanger
I
Hanger Pin
J
Bushing
229-397-0100
229-356-0300
231-732-0100
231-796-0100
231-731-0100
231-919-0100
231-893-0300
231-866-B601
231-866-B602
UP1139
213-602-0100
VSA 66 Front Roller
A
Spacer
B
Hex Nut
C
Spacer
D
Bearing
E
Shaft
F
Belt Shaft
F
Complete Assembly
201-310-2300
200-067-0100
200-171-0600
200-584-0700
237-374-0100
221-276-1400
UP4113
“Lil Shermy” Panzer Wheel Weights
Specifically Designed For Work 2 1/2” & Smaller. The New Up Close “Lil
Shermy” Eliminates The Problems Of Inserting, Shingle Stacking, And Lack
Of Drive Common With Pharmaceutical Type Folds. Adjustable Angled Front
Entrance Wheel Allows Operator To Maintain Complete Control Of Signature
From Exit Rollers To Stacker.
One Wheel Standard Wheel Assy
Mounting T For Muller
Replacement Belt
Lil Shermy Weight Base
Lil Shermy Additional Weight
UP2257
UP1662
UP2280
UP4901
UP4902
Panzer Wheel Weights
Greatly Assists Stacking Of Smaller Signatures Or Bulky Folds
One Wheel Standard Wheel Assy
Mounting T For Muller
Replacement Belt
Panzer Weight Base
Panzer Additional Weight
UP1312
UP1662
UP1329
UP4899
UP4900
Smoother Bar
SOM, TF, USA, B-26
TD
Replacement Spring
40
Encoder
(A)
(-)
(B)
(C)
Encoder
Encoder Assy
Coupling Part
Encoder Mounting Plate
UP1081
UP2454
UP2275
This Is Only A Sample Of Items Available
245-500-0100/FH126135/00
FH1062075/01
239-748-0200
237-695-0200
Telescoping Guide
SOM, TF, USA, B-26
TD
Replacement Spring
UP4357
UP4410
UP2275
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
VSA Belts & Parts
(A)
(A)
(B)
(B)
(C)
(D)
(E)
(E)
Clamp Lever
Clamp Lever
Solenoid
Solenoid
Guard
Guard
Gas Shock
Gas Shock
200-628-0200
237-457-0100
221-050-0100
248-200-0100
235-414-0200
235-433-0500
225-829-0100
237-451-0100
Cables & Sensor Eye
(A) Cable
(B) Sensor
227-865-0200
230-434-0100
Belts
Timing Belts
Timing Belts
Round Belts
Round Belts
Flat Belt
Flat Belt
Flat Belt
Flat Belt
237-438-0100
235-737-0100
201-890-1700
201-890-1300
237-449-0100
237-450-0100
284-329-0100
1025131/01
Stacker Spring
Complete Assy
Stripper Spring Only
210-754-0100
210-757-0100
Drive Motor
Motor Gear Box Assy
Gear Box Only
Motor Brushes Only
210-054-0100
UP2542
UP2645
Wet Score System
● Replaces Steel Scores ● Faster Make-Ready ● Sharper Cleaner Folds ● Can Be Easily Moved ● 2 Models To
Choose From, One For Every Budget ● Can Run Up To 4 Score Lines From Single Tank ● Micro-Adjustment On
Head For Ease Of Make-Ready ● 3 Different Size Needles For Different Applications ● Decreases Packing Cost.
Product Lays Flatter Taking Up Less Space ● Includes Tank, Two Water Score Arms And All Other Standard Parts
Model 100M2 Manual Shut Off
Model 100EAU2 Auto Electric Controlled (Controlled By Electronic Sheet Sensor)
Accessories
Mounting Bar Kit 30” & Smaller Machines
100STMB
Mounting Bar Kit 32” & Larger Machines
100STMB
Additional Score Arm Assembly
100XTRA
Replacement Needles
18 GA X 1”
99HS040
20 GA X 1”
99HS041
18 GA X 2”
99HS070
20 GA X 2”
99HS071
Drive Motor
(B) Main Drive Motor
(C) Main Drive Motor B-20
223-210-0100
261-442-BG01
Plate Rails For Model TF56, 66, 78
Non Operator Top Plate Rail, 4 Plate
Operator Top Plate Rail, 4 Plate
Non Operator Top Plate Rail, 6 Plate
Operator Top Plate Rail, 6 Plate
B-20/T-50 Non Operator Top
B-20/T-50 Operator Top
This Is Only A Sample Of Items Available
22 GA X 1”
99HS042
202-764-0100
202-765-0100
211-209-0100
211-210-0100
227-563-0100
227-562-0100
41
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Electrical Connectors
(A) Insert 6-Pin Male 35 Amp
(B) Insert 6-Pin Female 35 Amp
(C) Electrical Hood 6-Pin 35 Amp Cable Mount
(*) Electrical Hood 6-Pin 35 Amp Bulkhead Mount
(*) Electrical Hood 6-Pin 35 Amp Surface Mount
(D) Insert 32-Pin Male 1-16
(E) Insert 32-Pin Male 17-32
(F) Insert 32-Pin Female 1-16
(G) Insert 32-Pin Female 17-32
(H) Electrical Hood 32-Pin Cable Mount
(*) Electrical Hood 32-Pin Cable Bulkhead
(*) Electrical Hood 32-Pin Cable Surface
* Not Shown
Electrical Switches And Plugs
(A) Emergency Stop Actuator
(B) Clip For Contact Block
(C) Contact Block Normally Open
(D) Contact Block Normally Closed
(E) Emergency Stop Actuator
(F) Contact Block
(G) Stop Push Button Actuator
(H) Clip For Contact Block
(I) Contact Block Normally Closed
(J) Start Push Button Actuator
(K) Clip For Contact Block
(L) Contact Block Normally Open
(M) Contact Block Normally Closed
(N) Emergency Stop Actuator
42
UP2047
UP2048
UP2049
UP2050
UP2051
UP2052
UP2053
UP2054
UP2055
UP2056
UP2057
UP2058
UP3170
211-023-0100
UP1209
227-928-BG01
261-381-0400
227-914-0100
UP3168
227-915-0100
261-382-0300
261-383-0100
UP3167
227-928-BG02
UP3766
UP3767
Round Electric Plugs
(A) 4 Pin Female Panel Mount
(B) 4 Pin Female Cable Mount
(C) 4 Pin Male Cable Mount
(D) 7 Pin Female Panel Mount
(E) 7 Pin Female Cable Mount
(F) 7 Pin Male Cable Mount
UP3049
UP3050
UP3051
UP2734
UP3048
UP2733
Electrical plugs, Hoods & Inserts
(A) 6 Pin Male Insert
(A) 10 Pin Male Insert
(B) 6 Pin Female Insert
(B) 10 Pin Female Insert
(C) 6 Pin Housing – Cable Mount
(C) 10 Pin Housing – Cable Mount
(D) 6 Pin Housing – Bulkhead Mount
(D) 10 Pin Housing – Bulkhead Mount
(E) 6 Pin Housing – Surface Mount
(E) 10 Pin Housing – Surface Mount
210-921-0100
210-917-0100
210-922-0100
210-918-0100
210-924-0100
210-920-0100
210-923-0100
215-495-0100
220-956-0100
210-919-0100
Electrical Plugs, Hoods And Inserts
(A) 5 Pin Female Insert
(B) Housing – Bulkhead Mount
(C) 5 Pin Male Insert
(D) Housing – Cable Mount
260-703-0200
260-702-0200
260-701-0200
260-700-0100
This Is Only A Sample Of Items Available
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Jam Detectors
(A) Feeler Wire
(B) Pivot Block
(C) Micro Switch
(D) Complete Assembly
TD Style Plugs
(A) Cable Mount Hood
(B) Modular Frame Male Insert
(C) Module 3 Pin Male
(D) Module 3 Pin Female
(E) Modular Frame Female Insert
(F) Hood Surface Mount
(G) Module 5 Pin Male
(H) Module 5 Pin Female
(I) Module Pin Male 12 Gauge Wire
(J) Module Pin Female 12 Gauge Wire
(*) Module Pin Male 16 Gauge Wire
(*) Module Pin Female 16 Gauge Wire
(*) Module Pin Male 18 Gauge Wire
(*) Module Pin Female 18 Gauge Wire
(K) Cable
UP2878
UP2879
UP2880
UP2881
UP2882
UP2883
UP2884
UP2885
UP2886
UP2887
UP2888
UP2889
UP2890
UP2891
UP2877
Electrical Cable
4 Wire Control Cable
10 Wire Control Cable
18 Wire Control Cable
25 Wire Control Cable
4 Wire Power Cable
6 Wire Power Cable
7 Wire Power Cable
34 Wire Control Cable
7 Wire Control Cable
2 Wire Control Cable
4 Wire Power Cable (New Style MBO)
Stacker Motors
(A) Stacker Motor, Round Gear Box
(B) Stacker Motor, Square gear Box
(C) Circuit Board
(D) Gear Box Only Round
(E) Gear Box Only Square
(*) Motor Brush For UP1573 & UP1817
213-795-0100
213-791-0100
203-812-0600
213-796-BG01
207-563-0100 / FH1093721/01
221-533-0100
203-797-0100
UP2419
UP2420
UP2423
UP2028
UP2218
UP1932
UP2219
UP1930
UP1931
UP3123
UP3614
UP4290
UP4302
UP4776
Crank Handles
Crank Handles To Raise And Lower
Your Rollaway Sections
Raise Or Lower While
Standing Up
No Need To Crawl Under
Machines
UP1946
Casters
A
B
C
D
E
F
G
Caster 8 Page Swivel
Caster Locking Swivel Stahl Stacker
Caster Locking Swivel Stahl Stacker
Caster 8, 16 Page Cast Iron
Caster Swivel With Lock
Caster Swivel Without Lock
Caster 8 Page Swivel With Lock
This Is Only A Sample Of Items Available
203-477-0200
225-040-0100
203-454-0100 / 0200
225-365-BG01
263-133-0100
263-132-0100
261-035-BG01
43
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Roll Gears
20T Handwheel Shaft Gear Par
21T BELT SHAFT GEAR
22T Roll Gear TF PAR
19T Idler Gear
29T Stub Shaft TF PAR
15T Idler Gear TF SOM/8 & 16
17T ST Belt Shaft TF SOM/8
16T ST Handwheel Shaft Lower Drive
18T ST Roll Gear TF 8 & 16 PG
23T ST Stub Shaft TF 8 & 16 PG
T-49 Roll Gear
214-968-0100
213-677-0100
213-748-0100
214-969-0100
214-967-0100
208-712-0200
213-678-0200
208-715-0100
216-003-0100
211-427-0200
201-939-0200
Helical Gears
Quieter Running
Smoother Transfer Of Power
Less Expensive Than New Straight Tooth Gears
Kits Available For Both Parallel, Right Angle
And B-14 / T-36
Before
After
TF 56, 66, 78, 94
TF 56, 66, 78, 94
TF 56, 66, 78, 94
TF 56, 66, 78, 94
TF 56, 66, 78, 94
TF 56, 66, 78, 94
B-14 / T36
B-14 / T36
Gear 21 Tooth
Gear 21 Tooth
Gear 19 Tooth
Gear 28 Tooth
Gear 28 Tooth
Gear 19 Tooth
Gear 18 Tooth
Gear 21 Tooth
44
Complete Kit To Replace Straight Tooth Gears
Parallel Fold Roll Section
4 Plate
Parallel Fold Roll Section
6 Plate
8 & 16 Page Fold Roll Section
4 Plate
8 & 16 Page Fold Roll Section
6 Plate
Parallel Slitter Shaft Section
8 & 16 Page Slitter Shaft Section
Parallel & 8 Page Section
4 Plate
Parallel & 8 Page Section
6 Plate
UP4521
UP4796
UP4522
UP4797
UP4798
UP4799
UP4800
UP4801
Replacement Gears For Machines That Currently Use Helical Gears
Parallel Section
8 & 16 Page
Roll Gear Right Hand Para
231-695-0100
Gear 17 Tooth
Roll Gear R.H. R.A.
Roll Gear Left Hand Para
231-694-0100
Gear 17 Tooth
Roll Gear L.H. R.A.
Handwheel Shaft Gear Par
231-661-0100
Gear 15 Tooth
Handwheel Shaft Gear R.A.
Slitter Shaft Gear R.H. Para
231-660-0100
Gear 22 Tooth
Slitter Shaft Gear R.H. R.A.
Slitter Shaft Gear L.H. Para
231-659-0100
Gear 22 Tooth
Slitter Shaft Gear L.H. R.A.
Lower Drive Shaft Gear R.H. Par
231-661-0200
Gear 15 Tooth
Lower Drive Shaft Gear R.H. R.A.
Idler Gear R.H. Para
231-656-0100
Gear 14 Tooth
Idler Gear R.H.
Idler Gear Stud
202-803-0100
Gear 16 Tooth
Kick Out Shaft Gear R.A.
Kick Out Shaft Gear L.H.
231-694-0100
This Is Only A Sample Of Items Available
231-697-0100
231-696-0100
231-662-0100
231-664-0100
231-663-0100
231-662-0200
231-666-0100
231-665-0200
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Glue Rollers – Large 30mm Diameter Core Is 50% More Resistant To
Wrapping & Bending
B14/T36
UP4494
T50/B20 Glue Roller
UP3112
TF56 Before 5/89
UP2079
TF56 After 6/89
UP2876
TF66 Before 5/89
UP2316
TF66 After 5/89
UP2062
TF78 Before 5/89
UP2700
TF78 After 6/89
UP1939
USA 26
UP2062
TF/TH56 After 6/89 Soft P.U.
UP3713
TF/TH66 After 6/89 Soft P.U.
UP3714
TF/TH78 After 6/89 Soft P.U.
UP3715
TF/TH56 After 6/89 Super Grip P.U.
UP3716
TF/TH66 After 6/89 Super Grip P.U.
UP3717
TF/TH78 After 6/89 Super Grip P.U.
UP3718
TF/TH82 Super Grip
UP4399
Fold Plate Parts
(A) Lower entry pans
Swing deflector
TF56
UP4729
TF66
UP4728
TF78
UP4727
Zero Make Ready
TF56
UP4732
TF66
UP4731
TF78
UP4730
(B) Upper Entry Nose
Swing deflector
TF56
UP1669
TF66
UP1668
TF78
UP2361
Zero Make Ready
TF56
UP4726
TF66
UP4725
TF78
UP4724
(C) Sheet Stop Zero Make Ready
TF56
UP4735
TF66
UP4734
TF78
UP4733
All Steel Thumb Screws
M4X10
UP1220
M5X10
UP1219
M5X12
UP1221
M5X20
UP1223
M6X12
UP1218
M6X16
UP1224
M6X20
UP1225
M6X30
UP1226
Segmented Fold Plates
Solid Aluminum Construction
Each Segment Adjusts Individually
Each Mounts On Existing Plate Rail
No Need To Remove For Regular Folding
Move Segments Without Removing Plate From Machine
Glue Noses
With Stationary Deflector
B-22/T56
B-26/T66
B-30/T78
With Flip Deflector
B-22/T56
B-26/T66
B-30/T78
T50/B20 Gluing Entry Nose Kit
UP2195
UP1078
UP2136
UP2196
UP1077
UP2135
UP3687
Replacement Parts For Segmented Glue Rollers And Plates
(A) Replacement Segment 4.3” Long
(B) Replacement Segment 2.874” Med
(C) Replacement Segment 1.437” Short
(D) Replacement Roll Segment After 1/1/02
(E) Replacement Segment Super Grip P.U.
(F) Replacement Segment Soft P.U.
(A)
(B)
(C)
(D)
(E)
(F)
(G)
This Is Only A Sample Of Items Available
M10X20
Knurled Screw
Star Grip
M6X60
M8X25 Star Knob
M6X25
M6X28
UP1754
UP1753
UP1752
UP2727
UP3719
UP3720
UP3404
UP2784
UP2149
UP1469
UP2558
UP1809
UP2839
45
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Cross Carier Parts For B-20
(A) Idler Take Up Pulley
(B) Idler Pulley
(C) Drive Shaft
(D) Bearing
(E) Flat Belt
(F) V-Belt
(G) Cross Carrier Drive Pulley
(H) Idler Pulley For V-Belt
Cross Carrier Parts
(A) Bearing
(B) Cap Washer
(C) Tolerance Ring
(D) End Cap
(E) Cc Drive Pulley
(F) Double Drive Pulley
(G) V-Belt Pulley
(H) Shaft
(I) Ball Bearing (2 Required)
(J) Timing Belt
(K) Timing Belt
(L) Timing Belt
260-995-BG01
260-992-BG01
261-720-0100
31201
260-997-0200
261-473-0100
261-000-0100
261-048-0100
Trim Rings
26mm 1/4”
30mm 1/4”
30mm 1/4” With Groove
30mm 3/8”
35mm 1/4”
35mm 1/4” With Groove
35mm 3/8”
40mm 1/4”
40mm 1/4” With Groove
40mm 3/8”
Center Trim Spacers
Slitter Shaft
Knife Thickness
Diameter
20mm
0.5mm
20mm
1.0mm
20mm
0.5mm
20mm
1.0mm
25mm
0.5mm
25mm
0.5mm
25mm
0.5mm
25mm
0.5mm
25mm
0.5mm
35mm
0.5mm
35mm
0.5mm
35mm
0.5mm
35mm
0.5mm
35mm
0.5mm
35mm
1.0mm
35mm
1.0mm
35mm
1.0mm
35mm
1.0mm
35mm
2.0mm
35mm
2.0mm
35mm
2.0mm
218-228-0100
200-636-0100
201-903-0500
218-174-0100
262-968-0100
232-456-BG01
239-148-0100
218-200-0100
200-585-0200
203-473-1100
203-473-1200
203-473-1300
Fold Plate Adjustment
Mechanism
(A) Aluminum Gear Pulley
215-148-0100
(B) Idler Pulley
215-087-0100
Width Of
Desired Trim
1/8”
1/8”
1/4”
1/4”
1/8”
3/16”
1/4”
3/8”
1/2”
1/8”
3/16”
1/4”
3/8”
1/2”
3/16”
1/4”
3/8”
1/2”
1/4”
3/8”
1/2”
Side Guides
B14/T36
T50/52 TX52
T56/T66/T78 Stahl-O-Mat Cont. Or Pile Feed
TF56/TF66/TF78 Pile Feed
TF56/TF66/TF78/94/112 Continuous Feed
USA 24/26
TC58/TC66 TD56/TD66/TD78
USA/B20
T47/T49
46
UP1413
UP1001
UP1002
UP1297
UP1017
UP1018
UP1298
UP1030
UP1031
UP1191
This Is Only A Sample Of Items Available
Part#
UP2850
UP2851
UP2852
UP2853
UP1144
UP1306
UP1143
UP1304
UP1305
UP1148
UP1228
UP1147
UP1229
UP1230
UP1462
UP1463
UP1464
UP1465
UP1148
UP1653
UP1229
219-620-0110
213-384-0300
213-384-0200
221-179-0100
218-937-0100 Or
217-962-0100
262-559-0100
229-458-0100 Or
229-458-0200
260-201-0100
213-384-0100
800-375-3787
Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
405-272-0272
405-232-3053 (fax)
[email protected]
ppsokc.com
Stahl Folder Parts
Teflon And Bronze Bushings
Bz Stacker Shaft
200-671-0100
Teflon Bushing
204-812-0400
Teflon Bushing
213-861-0400
Teflon Bushing
213-601-0100
Needle Bearing
TC Style
NK24/16
219-095-0100
213-754-0200
213-761-0200
208-269-0200
203-525-0100
219-203-0100
219-215-0100
228-500-0100
Grease Seals
Flex 3 Pc
Blueline
Rubber V Ring
Dust Seal Stahl TD
Dust Seal Stahl TD
Dust Seal Stahl TD
219-207-0100
203-290-1400
213-757-0100
228-531-0100
228-532-0100
228-531-0200
TF 3PC
Plate Adjustment Mechanism
(A) Plate Adjustment Knob Assembly
(B) Clamp Lever
(B) Star Knob
(C) Aluminum Gear Pulley
(D) Aluminum Gear Pulley
(E) Plastic Gear Pulley
(F) Idler Pulley
(G) For Fold Plate
(H) Belt
(*) Thumb Screw
209-905-B601
222-608-0200
200-073-0100
215-093-0100
215-094-0100
215-092-0100
215-087-0100
UP1379
203-473-0600
200-070-0100
Sheet Hold Down For Glue Heads
Parallel Hold Down Assembly
RA Hold Down Assembly
Additional Glue Hold Down Smoothers
Trailing Bands For Feeder Or Cross Carrier
(A) Trailing Band Assembly
Clamp Only
Trailing Band Only (8’ Long – Cut To Length Needed)
Thumb Screw
(B) Trailing Band Assembly
Magnet Assembly Only
Trailing Band Only (8’ Long – Cut To Length Needed)
Thumb Screw
(C) Trailing Band Assembly
Clamp Only
Trailing Band Only (8’ Long – Cut To Length Needed)
Thumb Screw
(D) Trailing Band Assembly
Magnet Assembly Only
Trailing Band Only (8’ Long – Cut To Length Needed)
Thumb Screw
UP2319
UP2161
UP2318
UP1226
UP3655
UP3656
UP2318
UP1226
UP3088
UP3679
UP2318
UP1226
UP3772
UP3656
UP3693
UP1226
UP4193
UP4207
UP4909
Operator Glue Head Mount
Compression Style Clamp Eliminator Set Screw Marks On Shaft
Stop Collar For Height Adjustment
No Need To Remove Head To Make Lateral Adjustment
Insulated Post Prevents Adjustment Knobs From Getting Hot
UP4909
Brass Tipped Allen Screws
M8X6mm
UP1125
M8X8mm
UP2972
This Is Only A Sample Of Items Available
Spanner Wrenches
35mm Side
UP1783
35mm Top
UP1332
30mm Top
UP1333
25mm Top
UP1334
25mm Top
UP4154
47

Similar documents

Replacement Parts For Heidelberg

Replacement Parts For Heidelberg This Flyer Has Only A Sample Of Parts Available. If You Don’t See What You Need Just Call, Fax Or EMail Us.

More information

Replacement Parts For Ryobi

Replacement Parts For Ryobi This Is Only A Sample Of Items Available

More information