Replacement Parts For Heidelberg

www.ppsokc.com
800-375-3787
405-272-0272
405-232-3053(FAX)
[email protected]
Replacement Parts For Heidelberg®
This Flyer Has Only A
Sample Of Parts Available. If
You Don’t See What You
Need Just Call, Fax Or EMail Us.
Heidelberg Is A Registered Trademark Of Heidelberg – Druckmaschinen, AG
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Gripper Bar Complete GTO 46
Gripper Bar Complete GTO 52
(A) Anvil GTO 46
Anvil GTO 52
(B) Shaft GTO 46
Shaft GTO52
(C) Holder Assembly (D-I)
(D) Holder
(E) Finger With Urethane
(F) Backing Plate
(G) Holding Screw
(H) Belleville Washer
(I) Shoulder Screw
(J) Arm Assembly (K-N)
(K) Arm Only
(L) Cam Roller Stud
(M) Cam Roller
(N) Pin
(O) Collar
(P) Spring GTO 46/52
(Q) Spring GTO 52
(R) Pin
Gripper Bar Complete KOR,
KORA, KORD 62
Gripper Bar Complete KORD 64
Gripper Bar Complete KORS
(A) Anvil KOR, KORA, KORD 62
Anvil KORD 64
Anvil KORS
(B) Shaft KOR, KORA, KORD 62
Shaft KORD 64
Shaft KORS
(C) Holder Assembly (D-I)
(D) Holder
(E) Finger With Urethane
(F) Backing Plate
(G) Holding Screw
(H) Belleville Washer
(I) Shoulder Screw
(J) Arm Assembly (K-N) KOR, KORA,
KORD 62
Arm Assembly (K-N) KORS,
KORD 64
(K) Arm Only KOR, KORA, KORD 62
Arm Only KORS, KORD 64
(L) Cam Roller Stud
(M) Cam Roller
(N) Pin
(O) Collar
(S) Screw
2
HE460990
HE520990
HE461090
HE521090
HE461060
HE521060
HE521000
HE521061
HE521020
HE521062
P2003
P651
P8161
HE521040
HE521041
P7159
P11179
P373
P6739
HE521080
HE521085
P2834
HEK0R0990
HEK0RD0990
HEK0RS0990
HEK0R1090
HEK0RD1090
HEK0RS1090
HEKOR1060
HEK0RD1060
HEK0RS1060
HE521000
HE521061
HE521020
HE521062
P2003
P651
P8161
HEK0R1040
HEK0RD1040
HEK0R1041
HEK0RD1041
P7169
P6840
P1894
P6739
P2101
Gripper Bar Quickmaster 46
Gripper Bar Quickmaster 46DI
(A) Anvil W/Angled Rubber Pad
Anvil W/Flat Rubber Pad
(B) Set Screw
(C) Adjusting Collar
(D) Gripper Spring
(E) Delivery Gripper 46
Delivery Gripper 46DI
(F) Screw
(G) Gripper Shaft
(H) Taper Pin
(I) Screw
(J) Washer
(K) Ball Bearing
(L) Gripper Lever Only
(M) Stop Nut
(N) Angled Rubber Pad
Flat Rubber Pad
Gripper Lever Assembly (I-M)
HE460990QM
HE460990QMDI
HE461090QM
HE461090QMDI
P2506
P6858
HE461080QM
HE461020QM
HE461020QMDI
P2112
HE461060QM
P2810
P2103
P5569
P11113
HE461041QM
P2610
P5631
P11904
HE461040QM
Gripper Bar TOK Complete
(A) Anvil
(B) Set Screw
(C) Collar
(D) Shaft
(E) Gripper Shaft
(F) Cap Screw
(G) Gripper Pad
(H) Gripper Spring
(I) Tension Collar
(J) Set Screw
(K) Gripper Spring
(L) Taper Pin
(M) Stop Nut
(N) Gripper Operating Lever
(O) Washer
(P) Ball Bearing
(Q) Screw
(R) Bushing
HET00990
HET01090
P2506
P6728
HET01060
HE01020
P2112
P11904
HET01085
P6734
P2512
HET01080
P2810
P2610
HET01041
P580
P11113
P2103
P3239
This Is Only A Sample Of Items Available
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Gripper Chains
TOK (Set Of 2)
GTO 46/52 (Set Of 2)
KOR (Set Of 2)
KORD (Set Of 2)
KORS (Set Of 2)
MO (Set Of 2)
SM 72/102 One Each
SORD One Each
QM46 (Set OF 2)
QM46DI (Set OF 2)
HET01100
HE521100
HEK0R1100
HEK0RD1100
HEK0RS1100
HEMO1100
HE721100
HES0RD1100
HE461100QM
HE461100DI
Attachment Link TOK
Gripper Bar Speedmaster 72 Complete
Gripper Bar Speedmaster 102 Complete
Chain Link
(B-1) Carrier Link Assy. Op Side
(B-1) Carrier Link Assy. Op Side
(B-2) Carrier Link Assy. Non-Op Side
(B-2) Carrier Link Assy. Non-Op Side
Link Only For B-1
Link Only For B-1
Link Only For B-2
Link Only For B-2
Inner Chain Link
Needle Bearing
Dowel Pin For P8715
Grease Fitting
(C)
Washer
(D)
Screw
(E)
Clamping Piece
(F)
Finger
(G)
Gripper Supporting Shaft
(H)
Center Pivot Bearing
(I)
Gripper Operating Lever
(J)
Taper Pin
(K)
Cam Roller
(L)
Set Screw
(M)
Spring Guide
(N)
Pin
(O)
E-Ring
(P)
Clamp
(Q)
Clamping Piece
Screw
Nut
Lockwasher P10836
(R)
Screw
(S)
Gripper Pad
(T)
Clamp
(U)
Shaft
Shaft
Windmill
10X15 Complete
13X18 Complete
Screw For Operating Arm
HE720990
HE1090990-U
P8715
HE720991
HE1020991
HE720992
HE1020992
HE720991-L
HE1020991-L
HE720992-L
HE1020992-L
P8715
P3461
P2898
P3672
P2738
P2103
HE721066
HE721020
HE721060
HE721092
HE721040
P2865
P6871
P10017
P2970
P4768
P2759
HE721067
HE721065
P2103
P2603
P2143
HE721061-U
HE721064
HE721090
HE1021090
HEWI0990-15
HEWI0990-18
HET1307
Attachment Link
GTO 46/52
HET01100-A
HE521100-A
Carrier Links K/M/GTO Series
M Series Wide
M Series Short
K-Series Op
K Series Non Op
K/S Star Rod Carrier
GTO 46/52
GTO 46/52 Plate
P8739
P8740
P8732
P8742
P8734
HE521100-C
HE521100-E
Gripper Chain Connecting Links
KOR, KORD, KORS,
M Series (A)
KOR, KORD, KORS
Offset (B)
Connecting Plate
K/M Series (C)
A
B
P8761
P8762
P8712-P
C
Gripper Bar Carrier Links
Speedmaster 72 & 102
Complete
Op Side
Non-Op Side
(A) Link Only
Op Side
Non-Op Side
(B) Inner Link
(C) Needle Bearing
(D) Dowel Pin
(E) Grease Fitting
This Is Only A Sample Of Items Available
HE720991
He720992
HE720991-L
HE720992-L
P8715
P3461
P2898
P3672
3
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Wash -Up Blades
GTO 46
GTO 52
GTO Numbering 46
GTO Numbering 52
KOR, KORA
KORD 62
KORD 64
KORS
KSBA
MO, (Grey SORK)
MO, (Black SORK)
MO
Sheet Separators
(A) GTO 46, KORD 45 Degree
(B) GTO 46, KORD 45 Degree W/Pad
(C) GTO 46, KORD 90 Degree
(D) K-Series
(E) K-Series W/Hood
(F) GTO 46
(G) GTO 46 W/Hood
(H) GTO 52
(I) GTO 52 W/Hood
(J) GTO 52 45 Degree
(K) GTO 52 Stream Feed Op Side
(L) GTO 52 Stream Feed Non-Op Side
(M) M/S Series
(N) M/S Series
(O) M/S Series
(P) M/S Series
(Q) SB Series 90 Degree
(R) SB Series 45 Degree
(S) Windmill
(T) Windmill
(U) Quickmaster 45/46DI
(V) SM52/74 Op Side
(W) SM52/74 Non-Op Side
HEK0114
HEK0420
HEK0117
HEKS117
HEKS114
HE46117
HE46114
HE52117
HE52118
HE52114
HE52106
HE52107
HES0117
HES0114
HES0106
HES0107
HESB117
HESB114
HEWI114
HEWI117
HE46114QM
HE52106SM
HE52107SM
Sheet Seperator Holder L.H. & R.H.
KORA, KORD, KORS
SORD
SORD
SORD, SORDZ
SORMZ, Speedmaster 72
SORMZ Post Drupa
SORZ
Speedmaster
Speedmaster
Speedmaster 52
Speedmaster 102
Speedmaster 74
TOK
Windmill 10 X 15
Windmill 13 X 18
19
22
P-5075
P-30203
P-30231
P-30784
P-30218
P-30268
P-30222
P-30230
P-30264
P-30269
P-30261
P-30267
P-30279
P-30275
P-30272
P-30273
P-31301
P-30271
P-30270
P-30286
P-30274
P-30276
P-30791
P-30277
P-30235
P-30242
P-30209
P-30243
68
HEKORD113
83
SHEET SEPERATOR HOLDER KOR
HEK0R113
4
5 Holes
6 Holes
3 Holes
3 Holes
10 Holes
12 Holes
12 Holes
12 Holes
8 Holes
8 Holes
12 Holes
7 Holes
(2 Slots)
4-7/8 X 1-47/64 5 Slots
41-3/8 X 2-3/8
11 Holes
(2 Slots)
37-3/4 X 2
14 Holes
37-3/4 X 2-3/8
10 Holes
36-7/16 X 1-9/16 10 Holes
(6 Slots)
31-1/8 X 2-3/8
11 Holes
29-11/16 X 1-5/8 9 Holes
(2 Slots)
35-1/16 X 2
10 Holes
41 X 2-3/8
12 Holes
41-7/16 X 1-5/8 11 Holes
(2 Slots)
23-13/16 X 1-13/16 7 Holes
43 X 2-3/8
11 Holes
(2 Slots)
32-1/2 X 2-1/4
9 Holes
(2 Slots)
11-1/8 X 1-11/16 4 Holes
14-15/16 X 2
5 Slots
18-9/16 X 2-1/16 6 Holes
Quickmaster 46 & 46DI1
RZO Rotaspeed
Rubber Hood
For HEKS114, HE46114 & HE52118
Key Letters E, G & I Above
HE46114-R
Sheet Seperator Bar Quickmaster 46 & 46DI
19-3/4 X 2-3/8
22-1/16 X 2-1/4
17-1/2 X 1-5/8
20-1/4 X 1-1/2
23-9/16 X 2
25-5/8 X 2
27-3/16 X 2
29-15/16 X 2
22-3/8 X 1-3/4
27-15/16 X 2-3/8
28-7/16 X 2
27-1/4 X 2-3/8
HE46117QM
92
92Q
99
Sucker Feet
ZW19
Flat Disc. Over 70 Different Sizes Avaialble Up To 2”. Give ID,
OD & Thickness When Ordering
ZW22
7/8” ACROSS, NEW STYLE
ZW68
Cup Shape Prevents Snap Back, 1 1/8” Across
ZW83
GTO – Available In Gum Rubber Or Poly
ZW92
TOK-TOM
ZW92Q Quickmaster
ZW99
GTO
This Is Only A Sample Of Items Available
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Ink Fountain Blades
Windmill 10X15 (37.6 CMX10.1 CM)
Windmil 13X18 (48 CMX10.1 CM)
GTO 46 (45.3 CMX8.4 CM)
GTO 46 Numbering
GTO 52 (51.3 CMX9.4 CM)
GTO 52 Segmented
KOR (58 CMX10.1 CM)
KORD 64 (67.1 CMX10.1 CM)
KORS (74.2 CMX10.1 CM)
M-Series (66.2 CMX12.9 CM)
SORDZ (90.1 CMX11.7 CM)
SORM, SM72 (73 CMX11.7 CM)
SORMZ (73.1 CMX17.5 CM)
SORZ (83.1 CMX11.8 CM)
SORKZ (66 CMX11.8 CM)
SORSZ, SM102 (103.1 CMX17.5 CM)
TOK, TOM (27.6 CMX7.1 CM)
Quickmaster 46 (33.6 CMX7.1 CM)
Ink Fountain End Plates
Sold As A Set Of Left & Right
Quickmaster 46
Quickmaster 46DI
GTO52
GTO52 CPC/CPT
GTO 46/52 Numbering Unit
Speedmaster 52
Speedmaster 72/102
Speedmaster 74
MO
Op Side Spring Plate For All
Non-Op Spring Plate For All
Hickey Picker For All
TOK
Ink Blade Adjusting Screw
(A) K-Series, Windmill
(B) GTO 46/52, M/S Series
Speedmaster 72/102
(C) GTO #ING Unit, QM46, TOK
Ink Fountain Liner – Box Of 100
GTO 52, SM 52
SM 102
SM 72, SM 74
MO
QM46
Ink Fountain Knob
GTO 46/52, Speedmaster 72 & S-Series
Lay Gauge Pin Kit
Set Of 5
35mm
45mm
55mm
65mm
75mm
HEWI095-15
HEWI095-18
HE46095
HE46095-N
HE52095
HE52095-S
HEK0R095
HEK0RD095
HEK0RS095
HEM0095
HES0RDZ095
HES0RM095
HES0RMZ095
HES0RZ095
HES0RKZ095
HES0RSZ095
HET0095
HE46079QM
HE46566QM
HE46566QMDI
HE52566
HE52566CP
HE46566-N
HE52566SM
HE72566
HE74566
HEM0566
HE72261
HE72082
P31108
HET0792
P2929
P2928
P2021
P29993
P29994
P29995
P29996
P29997
P2910
P31133
P2859
P2861
P2862
P2864
P2894
Grease Gun Set
K Series, SM 102/72, GT0 46/52, M
And S Series
P-5935
Grease Cartridge Only
P-5993
Cam Followers
GTO 46
Transfer & Imp. Cylinder / Gripper Shaft (A)
Side Lay Shaft (B)
GTO 52
Transfer & Impression Cylinder
Storage Drum / Gripper Shaft (A)
K-Series
Impression Cylinder Shaft &
Sucker Bar Mechanism Outer Lever (C)
M-Series
Transfer & Impression Cylinder , Storage
Drum / Gripper Shaft (D)
Reversing Drum (E)
Register Feed Drum / Gripper Shaft (F)
SORZ/SORDZ/SORKZ/SORMZ/SORSZ
Register Feed Drum / Gripper Shaft
(Cam Facing Cylinder O.S. & D.S.) (G)
Register Feed Drum / Gripper Shaft
(Cam Facing Side Frames O.S. & D.S.) (H)
Impression Cylinder & Storage Drum
Gripper Shaft (F)
Speedmaster 72/102
Register Feed Drum / Gripper Shaft
(Cam Facing Cylinder O.S. & D.S.) (G)
Register Feed Drum / Gripper Shaft
(Cam Facing Side Frames O.S. & D.S.) (H)
Transfer & Imp. Cylinder / Gripper Shaft (F)
Transfer Gripper (H)
Speedmaster 74
Delivery Table (I)
Speedmaster 102
Gripper Opening Lever On Delivery
Gripper Bars (J)
On Lever / Inking Unit (G)
Quickmaster
Impression Cylinder / Gripper Shaft (A)
Teflon Seals
GTO 46/52
1 Pack
5 Packs
10 Packs
TOK/TOM
1 Pack
5 Packs
10 Packs
Quickmaster 46
95mm From End To End
1 Pack
5 Packs
10 Packs
102mm From End To End
1 Pack
5 Packs
10 Packs
This Is Only A Sample Of Items Available
P3441
P4368
P3441
P6870
P3416
P3443
P3444
P3442
P3445
P3444
3442
P3445
P3444
P3445
P3439
P6871
P3442
P3441
P30712
P31168
P31169
P30713
P30833
P30834
P31161
P31161-5
P31161-10
P31181
P31181-5
P31181-10
5
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
GRIPPER FINGERS
GTO 46/52
Transfer & Imp. Drum (Urethane Tip) (A)
Transfer & Imp. Drum (Plain Metal Tip) (A)
Imp. – Perfecting Drum (Urethane Tip) (B)
K-Series
Transfer & Imp. Drum
(Metalized Grit Tip) (C)
M-Series
Feed Drum (Urethane Tip) (D)
Transfer & Imp. Drum (Urethane Tip) (A)
Transfer & Imp. Drum (Plain Metal Tip) (A)
Transfer Drum Coating Unit (Metal Tip) (A)
Imp. Drum Coating Unit (Urethane Tip) (A)
Imp. Drum Coating Unit (Plain Metal Tip) (A)
Quickmaster 46/46DI & TOM/TOK
Impression Drum (Urethane Tip) (E)
S-Series
Feed Drum (Urethane Tip) (D)
Transfer & Imp. Drum (Urethane Tip) (F)
Transfer & Imp. Drum (Plain Metal Tip) (F)
Imp. Cylinder Gripper-Sbd (Urethane Tip) (J)
Speesmaster 72
Tansfer & Imp. Drum (Urethane Tip) (F)
Transfer & Imp. Drum (Plain Metal Tip) (F)
Imp. – Perfecting Drum (Urethane Tip) (G)
Imp.—Perfecting Drum (Plain Metal Tip) (G)
Transfer Drum (Large)
Perfecting (Urethane Tip) (G)
Transfer Drum (Large)
Perfecting (Plain Metal Tip) (G)
Speedmaster 102
Feed Drum (Urethane Tip) (D)
Transfer & Imp. Drum (Urethane Tip) (H)
Transfer & Imp. Drum (Plain Metal Tip) (H)
Imp. – Perfecting Drum (Urethane Tip) (I)
Imp.-Perfecting Drum (Plain Metal Tip) (I)
HE52245
HE52237
HEM0237
HEK0R225
HE72225
HE52245
HE52237
HE52237
HE52245
HE52237
HE46237QM
HE72225
HESK237
HESK245
HESBD237
HESK237
HESK245
HE72237S
HE72245S
HE72237S
HE72245S
HE72225
HE102237
HE102245
HE102224
HE102225
Filter Cartridge
TL6DV Pump
TL12DV Pump
TL61TV Pump
TL81TV Pump
DCLF 60/80
Quickmaster 46
P1174HT6
P1174HT12
P1174HT61
P1174HT81
P9426
P9470
Brass Filter Screens
Windmill Platens (24mm Collar)
GTO 46 & 52 (28mm Collar)
GTO 46/52, Windmill (38mm Collar)
6
HE46252
HE52252
HEK0R252
HEK0RD252
HEK0RS252
HEM0252
HE72252
HE102252
HES0RDZ252
HES0RDK252
HES0RZ252
HET0252
HE46258
HE52258
HEK0R25
HEK0RD258
HEK0RS258
HEM0258
HE72258
HE102258
HES0RDZ258
HES0RDK258
HES0RZ258
HET0258
HE46256
HE52256
HEK0R256
HEK0RD256
HEK0RS256
HEM0256
HE72256
HE102256
HES0RDZ256
HES0RDK256
HES0RZ256
HET0256
P2009
P2010
P2421
P12319
P9410
P9411
P9412
Silencer For GTO 46/52, K-Series, SB-Series &
Windmill Platens
P9413
Feed Tape
SM 72/102, S-Series 2 Color
MO, S-Series 1 Color
Blanket Bar Assembly
Complete
GTO 46
GTO 52
KOR
KORD
KORS
M-Series
Speedmaster 72
Speedmaster 102
SORDZ
SORDKZ
SORZ
TOM, TOK
(A) Upper Clamp
GTO 46
GTO 52
KOR
KORD
KORS
M-Series
Speedmaster 72
Speedmaster 102
SORDZ
SORDKZ
SORZ
TOM, TOK
(B) Lower Clamp
GTO 46
GTO 52
KOR
KORD
KORS
M-Series
Speedmaster 72
Speedmaster 102
SORDZ
SORKZ
SORZ
TOM, TOK
(C) Screw
Speedmaster 72/102 Only
TOM, TOK Only
(D) Spring
P3918
P3927
Limit Switches
(A) GTO 46/52, M/S Series, Speedmaster 72/102
(B) GTO 46/52, M/S Series, Speedmaster 72/102
(C) GTO 52, M-Series, Speedmaster 102 (Snap Action)
(C) M-Series (Slow Action)
(D) GTO 46/52 Located Behind Blower Tubes
This Is Only A Sample Of Items Available
P9836
P9837
P9838
P9839
P4074
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Slip Ring Brushes
GTO 52
K-Series (Shown)
S-Series
S-Series
Paired Collector Brush
Carbon Brushes
GTO 52
Carbon Brush
Carbon Brush
S-Series
Speedmaster 102F+L, 102S+L, 102S+F
SM 102Z+L, 102D (Main Motor)
SM 102 +L, 102Z (Main Motor)
Speedmaster 102V+L, 102F
102D+L, 102V (Main Motor)
TOK/TOM (Motor)
Standard Cylinder Jackets
Windmil 10X15
Windmil 13X18
GTO46
GTO52
M-Series
KORD 62
KORD 64
KOR
KORA
KORS
Stainles Steel
Speedmaster 52
Refined Cylinder Jackets
GTO 46
GTO 52
MO
Speedmaster 72
Speedmaster 102
Die Cutting
KSBAZ
SBB, SBBS, SBBZ
KS
KSB
KSBA
S-Series
SBG
P9417
P9428
P9438
P9439
P9429
P9418
P9431
P9432
P9769
P9433
P9434
P9435
P9436
P9437
P9440
Bulbs
8 Watt Flourescent For GTO 45/52, TOM/TOK, QM 46
14 Watt Flourescent For KORD 64
Flourescent Speedmaster 102
Bipin Flourescent MO
Medium Wave Infared MO
Medium Bipin Fluorescent KORD
Minature Bipin Filament SM74/102, M-Series
P9743
P9726
P9855
P9763
P9765
P9720
P4230
Ribbed V-Belts
TOK Drive Motor (610mm)
TOK Drive Shaft (726mm)
GTO 46 Drive Motor (1168mm)
GTO 46/52 Drive From Variable
Speed Pulley (900mm)
GTO 52 Drive Motor (1321mm)
GTO 52 Z/P, V/P Drive Motor (1016mm)
GTO 52 Z/P, V/P Drive Motor (1397mm)
Quickmaster 46DI Long
Quickmaster 46DI Short
MOFP, MOZP
Star Rod Assemblies
*** These Do Not Come With Brushes Or Wheels
GTO 46
GTO 52
KOR, KORA, KORD 62
KORD 64
M Series
SORZ
SORKZ
SORMZ / Speedmaster 72
SORSZ / Speedmaster 102
S-Cylinder (33 3/4 O.A.L.)
Spring Only GTO 46/52
Spring Only SM72/102, S-Series
HE463170
HE523170
HEKORD3170-62
HEKORD3170-64
HEM03170
HESR3170
HESK3170
HESM3170
HESS3170
HESCP3170
HE463110
HES0R3110
COG Belts
K Series – 50 Cycle Motors
K Series – 60 Cycle Motors
Windmill 10x15 Main Drive
Windmill 13x18 Main Drive
A
B
SORDZ
Complete
(A) Spring Only
(B) End Pin – (Not Sold Seperatly)
(C) Button Rivet
Star Rod Brush Assy.
Complete
Brush Only
Collar Only
Rubber O-Ring
HESD3170
HEK0R3110
P4779
P10376
C
P30842
P30842-B
P30842-C
P553
This Is Only A Sample Of Items Available
Starwheel
(A) Star/Pointed Surface
For K/S/M Series
(B) Knurled/Dimpled Surface
GT0 46/52
(B) Knurled/Dimpled Surface
For K/S/M Series
(C) Smooth/Plain Surface
For K/S/M Series
Hardware Emergency Kits
Complete Master Kit
Nut Kit - 43 PCS
Screw Kit - 168 PCS
Pin Kit - 100 PCS
Ring Kit - 47 PCS
Washer Kit - 60 PCS
P30850
P30858
P30851
P30852
P30853
P30854
P30855
P30859
P30857
P30856
P30867
P30860
P30861
P30862
P30863
P30864
P30865
P30866
P30888
P30891
P30869
P30887
P30890
P3780
P3783
P3785
P3716
P3788
P3790
P3791
P3779
P3778
P3777
P3885
P3889
P3893
P3722
P30842-0
P30842-GTO
P30842-K
P30842-S
P30397
P30392
P30393
P30394
P30395
P30396
7
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
A
C
B
D
E
Gripper Finger GTO 46/52, K-Series
With Out Urethane
With Urethane
Hickey Removers
(A) SORS, SORD, SORM, MO
(B) Speedmaster 52
(C) Speedmaster 74
(D) Speedmaster 102
(E) Rubber Replacement For P-29980 Only
Brush – M, S, Speedmaster 102
P29981
P29983
P29982
P29980
P31336
HE46970
He521050
HE521020
Front Guide GTO 46/52, K-Series
Located On Transfer Gripper Between Gripper
Feet.
(A) Guide Only
HEK0383
(B) Adjusting Knob
P2932
(C) Retainer Spring
HEK0257
(D) Adjusting Screw
P912
HES0107
Pump Vane
Lifting Sucker
M-Series, S-Series, Speedmaster 102
Threaded Bushing On Feed Table Bracket
O.S./D.S. GTO 46/52, K-Series
Sheet Steadier Brush GTO 46/52, K-Series
Complete
HE46403
Brush Only
HE46420
Wing Nut
P3399
Shoulder Screw
P8176
P9444
HE102174
Sheet Steadier Assembly.GTO 46/52, K-Series
Complete
HEK0027
(A) Sheet Steadier
HEKOR090
(B) Holder
HE46049
(C) Thumb Screw
P2022
Feeder Brush Wheel S-Series, Spdmaster
72/102
Complete White Brush
HESR403
Complete Black Brush
HESR767
(A) Spring
P12319
(B) Thumb Screw
P2903
(C) Small Bracket
HESR498
(D) Hex Head Screw
P2043
(E) Large Bracket
HESR473
(F) Thumb Screw
P2924
(G) Holder
HESR492
(H) Pin
P4777
(I) Brush Wheel White
HESR420
Brush Wheel Black
HESR500
(J) E-Ring
P2753
Transfer Gripper – MOZ, Speedmaster, SORK
HEMT225
White Brush Is For Paper Stock
Black Brush Is For Cardboard Stock
S-Series, Speedmaster 72/102 - Sheet Steadier
Brush
Complete
HESR467
(A) Hex Head Screw
P2077
(B) Flat Washer
P581
(C) Nut
P2603
(D) Thumb Screw
P2924
(E) Bracket
HESR485
(F) Spring Washer
P654
(G) Sheet Steadier Brush
HESR475
Sheet Stop For Side Lays M-Series,
S-Series, Speedmaster
HE102100
Perforated Wheel GTO 46/52, M-Series, Speedmaster
52/74
P31081
Slitter Wheel GTO 46/52 Not Shown P31082
Jogger Rod Sleeve Speedmaster, M &S Series
HEM0153
Spring For Feed Jogger Lever GTO 46 & 52,
Speedmaster 102
HE46392
8
Powder Tube Assy GTO 46/52 & K-Series
Complete Short Tube
Complete Long Tube
Powder Tube Sub Assy. (A-I)
Spray Nozzle Sub Assy. (J-M)
Powder Tube Sub Assy (N-R)
Short
Long
(A) Manifold
(B) Screw
(C) Washer
(D) Gasket
(E) Rubber Washer
(F) Lock Nut
(G) Powder Tube Guide
(H) Stop Screw
(I) Screw
(J) Nozzle With 3 Holes
Nozzle With 8 Holes
(K) Screw
(L) Spring
(M) Nozzle Tube
(N) Tube Short
Tube Long
(O) Nut
(P) Compression Nut With Gasket
(Q) Guide Collar
(R) Set Screw
This Is Only A Sample Of Items Available
HEK0R6030
HEK0R6040
HEK0R6046
HEK0R6047
HEK0R6035
HEK0R6045
HEK0R6050
P2044
P592
P6422
P11036
P2616
HEK0R6051
P2351
P2082
HEK0R6056
HE466056
P2921
P15601
HEK0R6055
HEK0R6052
HEK0R6053
P2681
P2941
HEK0R6054
P2499
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Holder Assembly K-Series, GTO 46/52, Windmills –
Sheet Steadier Support
HEK0R090
Sheet Brake GTO 46/52,
K-Series, SB-Series
Complete
(A) Strap
(B) Block
(C) Thumb Screw
(D) Stop Nut
(E) Screw
Impression Gripper GTO52VP, M-Series
With Urethane
HEM0237
Without Urethane
HEM0245
Blue Polyurethane Hose (Per Meter)
ID 9mm OD 11mm
ID 4mm OD 6mm
ID 2.6mm OD 4mm
P9558
P9557
P9531
Hose - Quickmaster 46/DI, M-Series, TOK
59 Inches
P5248
18 Inches
P5258
6 1/2 Inches
P5263
HE52467
HE52500
HE52473
P2924
P2610
P8174
Holder Assy. GTO 46/52, K-Series, Windmill
Complete
HEK0625
Replacement Roll Pin
P2839
Replacement Thumb Screw
P2022
Holder Assembly GTO 46/52, Windmill Platens
Complete
HEWI434
Replacement Roll Pin
P2839
Replacement Thumb Screw
P2022
Hose - Per Meter For S And M Series, Speedmaster
52/74/102
P9511
Ink Spacer - Speedmaster 72, S-Series
P6729
Dampening Spacer - Speedmaster 72/102
& S-Series
P6731
Reversing Gripper - Plain Tip
For Speedmaster 72, 102, M-Series
HE721020-R
Delivery Blowdown Fan - Speedmaster 102, M-Series
Terminal Connection
P4204
Wire Connection
P4205
Starter - Speedmaster 52/102, TOK
Sheet Smoother S-Series, Speedmaster 72/102
Complete Operators Side
HES0562
Complete Non Operators Side
HES0568
(A) Spring Plate
HES0779
(B) Screw
P10207
(C) Bar Only **
HES0483
(D) Block
HES0359
(E) Thumbscrew
P2923
(F) Spacer Piece Op Side
HES0541
Spacer Piece Non-Op Side
HES0573
** Bar Only Has No Holes And Is Currently Available Only In The
Assembly
P9850
Handle For Sheet Stop GTO45/52, Windmill
Same For O.S. And D.S.
P7224
Feed Drum Finger S-Series, M-Series, Speedmaster
72/102
HE72225
Paper Retriever - Speedmaster 102/72,
GT0 52 And M-Series
P5999
Powder Tube Nozzles
GTO 46 & 52
Windmill
Forwarding Retaining Spring - S-Series,
M-Series & Speedmaster 72 / 102
Numbering Head For Speedmaster 52, Quickmaster 46
And GT0 Series
Convex (Vertical) Forward
YJGTOCF
Convex (Vertical) Reverse
YJGTOCR
Straight (Horizontal) Forward
YJGTOSF
Straight (Horizontal) Reverse
YJGTOSR
HE466056
HEWI6056
Cam For Gto
Left
Right
HESØ842
SHEET SMOOTHER PLATE SPRING
(ALSO USED ON SPEEDMASTER 72 / 102)
(A) SORZ, SORDZ, SORSZ
HESØ588
(B) SORKZ, SORMZ
HESØ924
Hold Down Roll Complete
Rubber (SM 102, S, M-Series)
Steel (SM 102 And S Series)
YJGTOLC
YJGTORC
HES0434-R
HES0434-S
Spring - For Feed Table S&M Series, SM102
This Is Only A Sample Of Items Available
HES0148
9
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Spring - All S-Series. Speedmaster 72/102
For Dampening Roller Journal And Vibrator Control
Spring Rod
HESØR525
Forwarding Sucker - S & M Series, Speedmaster
72/102
O.S. & D.S Set
HES0990
O.S. . . . . . . . . . . . . . . . . . . . . . . . . HE-S0990-OS
D.S. . . . . . . . . . . . . . . . . . . . . . . . . HE-S0990-DS
Roller Snap Switch S-Series, Speedmaster
72/102, M-Series
P9805
Snap Switch Quickmaster, TOK
Sucker Bar Slides
GTO-46 (165 Mm Long - 2.5 Mm Holes Red)
GTO-46 (63 Mm Long - 2.5 Mm Holes Red)
Windmill 10X15 (261 Mm Long - 2.5 Mm Holes Red)
Windmill 10X15 (261 Mm Long - 3.8 Mm Holes Yellow)
Windmill 10X15 (261 Mm Long - 1.6 Mm Holes Pink)
Windmill 13X18 (327 Mm Long - 2.5 Mm Holes Red)
Windmill 13X18 (327 Mm Long - 3.9mm Holes Yellow)
Windmill 13X18 (327 Mm Long - 1.6 Mm Holes Pink)
P30752
P30753
P30754
P30755
P30756
P30797
P30798
P30799
P4446
Claw For Blanket & Impression Cylinder Clamp Shaft GTO
45/52, M-Series
HE46390
Sheet Smother
GTO 46 Long
Complete
(A) Bar **
(B) Thumb Screw
(C) Block
(D) Screw
(E) Nut
(F) Pan Head Screw
(G) Plate Spring
(H) Roll Pin
HE46434
HE46483
P2924
HEK0R359
P2305
P2600
P2355
HE46779
P516
GTO 46 Short
Complete
(A) Bar **
(B) Thumb Screw
(C) Block
(D) Roll Pin
HE46352
N/A
P2924
HEK0R359
P516
GTO 52
Complete
(A) Bar **
(B) Thumb Screw
(C) Block
(D) Pan Head Screw
(E) Plate Spring
(F) Roll Pin
HE52434
HE52483
P2924
HEK0R359
P2355
HE46779
P516
** Bars Alone Have No Holes And Need
**
ALONE
To BARS
Be Drilled
Per HAVE
NO
HOLES
AND
NEED
Your Block
TO BE DRILLED PER
Over Running Clutch Assembly GTO 46 & 52
Complete Ink
HE42226
Complete Water
HE52370
(A) Sheeve
HE52226-S
(B) One Way Clutch Bearing
P3458
(C) Housing Only
N/A
(D) Pin
P4792
(E) Washer
P2720
(F) Retaining Ring
P10752
Reversing Drum Gripper GTO 46/52
(A) Upper Position
HE521020-RU
(B) Lower Position
HE521020-RL
GTO 46/52 Feed Gripper Assy
Complete
(A) Gripper Finger
(B) Hex Head Screw
(C) Needle Bearing
(D) Cam Roller
(E) Flat Washer
(F) E-Ring
(G) Stud For Cam Roller
(H) Taper Pin
(I) Connecting Piece
(J) Torsion Spring
(K) Gripper Pad
(L) Spring
(M) Grooved Pin
(N) Obsolete Use L & M In Place Of N
Over Running Clutch Lever Assy. GTO 46 & 52 Ink Unit
Complete
(A) Lever & Knob Assembly
(B) Collar W/O Pins
(C) Bearing Race
(D) One Way Clutch Bearing
(E) Collar W/Pins
(F) Washer – Bearing Retainer
(G) Belleville Washer
Bearing Sleeves For GTO 46 & 52
Water Oscillator Nos
Water Oscillator Os
Upper Steel Oscillator Os
Steel Osc. 2nd From Top
Ink Distributor Nos
Ink Osc./Dist.-Front & Rear
GTO52 Feeder Retainer Spring
10
HE46511
HE46212
P2088
P3466
P6838
P595P
2759
P7943
P431
P11923
HE46212-T
N/A
HE46212-E
P3037
OBSOLETE
This Is Only A Sample Of Items Available
HE46259
P320416
P6785
HE46261
P3454
P6784
P2720
P11833
HE52432
HE52436
HE52476
HE52496
HE52494
HE52548
HES0711
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Guide Wheel Kit – GTO 52
Complete
Wheel Only
O-Ring
Set Screw
Plate Clamp Assembly – Tail Edge
GTO 46 Complete
GTO 52 Complete
(A) Upper Clamp – GTO 46
Upper Clamp – GTO 52 (Left)
Upper Clamp – GTO 52 (Right)
(B) Knurled Adjusting Nut
(C) Eccentric Shaft – GTO 46
Eccentric Shaft – GTO 52
(D) Adjusting Stud
(E) Lower Clamp – GTO 46
Lower Clamp – GTO 52
(F) Threaded Stud
(G) Spring
(H) Screw
(I) Metal Strip - GTO 46 (See K & L)
Metal Strip – GTO 52
(J) Set Screw
(K) Rubber Strip – GTO 46
Rubber Strip – GTO 52
(L) Metal & Rubber Strip – GTO 46
Metal & Rubber Strip – GTO 52
Plate Clamp Assembly – Lead Edge
GTO 46 Clamp
(A) Upper Clamp
(B) Eccentric Shaft
(C) Thumb Screw
(D) Spring
(E) Screw
(F) Washer
(G) Adjusting Bracket
(H) Lower Clamp
(I) Spring
(J) Screw
(K) Metal Strip (See M & N)
(L) Set Screw
(M) Rubber Strip Not Shown
(N) Metal & Rubber Strip Assy
HE521327
HE521328
P11778
P2580
HE46367
HE52367
HE46359
HE52359-L
HE52359-R
P2949
HE46435
HE52435
P7198
HE46353
HE52353
P9138
P12909
P2418
HE46353-M
HE52353-M
P2508
HE46353-R
HE52353-R
HE56353-MSR
HE52353-MSR
HE46788
HE46359
HE46435
P2917
HE46896
P2101
P5519
HE46755
HE46353
P12909
P2418
HE46353-M
P2508
HE46353-R
HE46353-MSR
Angle For Paper Stripper GTO 46/52
Plate Clamp Assembly – Tail Edge – For Bacher Plate
GTO 46 Complete
(A) Upper Clamp (Left)
(B) Upper Clamp (Right)
(C) Knurled Adjusting Nut
(D) Flat Washer
(E) Eccentric Shaft
(F) Adjusting Stud
(G) Lower Clamp Sub Assembly
(H) Lower Clamp
(I) Rubber Strip (See N)
(J) Metal Strip (See N)
(K) Threaded Stud
(L) Spring
(M) Screw
(N) Metal & Rubber Strip Assy
Plate Clamp Assembly – Lead Edge – For Bacher Plate
GTO 46 Complete
(A) Collar
(B) Collar Scale
(C) Adjustment Holder
(D) Washer
(E) Spacer
(F) Spring
(G) Threaded Stud
(H) Spring
(I) Adjusting Block
(J) Ring Scale
(K) Adjusting Stud
(L) Lower Clamp
(M) Metal Strip (See P & Q)
(N) Eccentric Shaft
(O) Upper Clamp
(P) Rubber Strip Not Shown
(Q) Metal & Rubber Strip Assy
This Is Only A Sample Of Items Available
HE462301
HE46367-BC
HE46359-L
HE46359-R
P2949
P10942
HE46435
P7198
HE46353-BC-S
HE46353-BC
HE46353-R
HE46353-M
P9138
P12909
P2418
HE46353-MSR
HE46788-BC
P6725
P6726
HE52351
P2749
P6802
P12148
P9137
P12909
HE52755
P6724
P7199
HE46353-BC
HE46353-M
HE46435
HE46359
HE46353-R
HE46353-MSR
11
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Plate Clamp Assembly – Lead Edge
GTO 52 Complete
(A) Clamp
(B) Knurled Adjusting Nut
(C) Spacer
(D) Spring
(E) Eccentric Shaft
(F) Spring
(G) Adjusting Stud
(H) Lower Clamp
(I) Screw
(J) Set Screw
(K) Metal Strip (See L & M)
(L) Rubber Strip Not Shown
(M) Metal & Rubber Strip Assy
Upper Dampening Bearing Support GTO 46/52
Complete D.S.
Complete O.S.
(A) Support Only
(B) Handle
(C) Shoulder Screw
(D) Spring (Inside B)
(E) Trunnion Stud
(F) Set Screw (Holds G)
(G) Eccentric Stud
(H) Grooved Pin
(I) O-Ring
HE46344
HE46346
HE46350
P7214
P8171
HE46896
P7173
P2501
P7163
P4780
P5330
Lower Dampening Bearing Support GTO46/52
Complete GTO 46/ D.S. Green
Complete O.S. Green
(A) Spring (Inside B)
(B) Handle
(C) Shoulder Screw
(D) Dowel Pin
(E) Trunnion Stud
(F) Set Screw (Holds G)
(G) Eccentric Stud
(H) Grooved Pin
(I) Grooved Pin
(J) O-Ring
(K) Brass Stud
(L) Nut
(M) Screw (For K)
He46400
HE46415
HE46896
P7174
P8171
P3132
P7173
P2501
P7163
P2899
P4780
P5330
P7174
P2601
P6530
Water Fountain Trays (From Left To Right)
GTO 46 Old Style (Serial# 650058-654211)
GTO 46 New Style (Serial# 656798-698328)
12
HE52788
HE52359
P2949
P6843
P12148
HE52435
P12909
P7198
HE52353
P2418
P2508
HE52353-M
HE52353-R
HE52353-MSR
Plate Clamp Assembly – Lead Edge – For Bacher Plate
GTO 52 Complete
(A) Collar
(B) Collar Scale
(C) Adjustment Holder
(D) Spacer Cam
(E) Spring
(F) Threaded Stud
(G) Adjusting Stud
(H) Adjusting Block
(I) Lower Clamp
(J) Metal Strip (See Q & R)
(K) Spring
(L) Hex Head Screw
(M) Ring Scale
(N) Nut
(O) Eccentric Shaft
(P) Clamp
(Q) Rubber Strip Not Shown
(R) Metal & Rubber Strip
Bearing Support GTO 46/52
GTO 46 D.S. Red, O.S. Yellow GTO 52
D.S. Red Complete W/O Latch
GTO 52 O.S. Yellow Complete W/Latch
GTO 46/52 D.S. Yellow / O.S. Red
Complete W/O Latch
(A) Set Screw
(B) Set Screw
(C) Shoulder Screw
(D) Handle
(E) Spring (Inside D)
(F) Trunnion Stud
(G) Set Screw (Holds H)
(H) Eccentric Stud
(I) Grooved Pin
(J) O-Ring
(K) Spring (Under B)
(L) Latch (FOR HE52558)
HE46316-OS
HE46316-NS
This Is Only A Sample Of Items Available
Bearing Support GTO 46/52
GTO 46/52 D.S. White /
O.S. Blue Complete
GTO 46 D.S. Blue Complete
GTO 52 O.S. White Complete
(A) Handle
(B) Shoulder Screw
(C) Bracket Assembly
(D) Eccentric Stud
(E) Bearing Support
(F) Grooved Pin
(G) O-Ring
HE52788-BC
P6725
P6726
HE52351
P6843
P12148
P9137
P7199
HE42755
HE52353
HE52353-M
P12909
P2089
P6724
P2634
HE52435
HE52359
HE52353-R
HE52353-MSR
HE46558
HE52558
HE46614
N/A
P2538
P8171
P7214
N/A
P7173
P2501
P7163
P4780
P5330
P152422
HE46590
HE46584
HE46586
HE52586
P7214
P8171
HE46618
P7163
HE46611
P4780
P5330
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Drive Belt For Powder Spray Unit GTO 46/52
50 Cycle
P3706
60 Cycle
P3705
Threaded Pin For Numbering & Perforating Units
P2585
Hose Connects To Blower Tube Bar From Air
Pump On Feeder GTO 46/52
P5299
Clamp For Hose
P1160
Water Clutch Assy. GTO 46/52
Adjusting Screw Assembly
Complete
(A) Screw
(B) Brass Stud
(C) Nut
(D) Lockwasher
Distributor Roller Gear
GTO 46/52
Bolt On End Of Side Lay Shaft (Gear Side) GTO
46/52
P4786
Cam Roller That Operates With Bolt
P4368
Side Lay Lever GTO 46/52
HE46418
HE46427
P6530
P7174
P2601
P11830
HE52534
HE52096
Compression Spring - GTO 45 / 52
For Clamping Piece On Transfer Gripper.
P15843
Threaded Stud For Side Guide Lever
GTO 46/52
P9128
Wing Nut For Side Guide Lever
P3399
Spring - GTO 46 / 52 - For Rod On Numbering
Unit.
HE46517
Handle – Revolving Knob For GTO 46
Spring - GTO 52 For Gripper Operating
Cam On Reversing Drum
HE52379
P7222
Spring - GTO 52 - For Gripper Holder.
(12 Mm X 4.5 Mm)
HE52843
Adjusting Collar On Impression Gripper Bar
GTO 46/52
P6739
(A) Thrust Bearing - GTO 46 / 52 - For
Blanket Cyl. O.S.
P3429
(B) Axial Bearing Washer - GTO 46 / 52 - For
P3429 Bearing.
P2744
Trip Block - GTO 52 - For Plate Clamp
HE52391
Threaded Bushing - GTO 46 / 52 - For Plate Cylinder
Clamp Assy
HE46329
Cam Lever - GTO 52
(A) Stud - GTO 46 / 52
This Stud Is Also Used On Both Upper And Lower
Delivery Rod Heads
P7168
(B) Support Bracket For Plate Cylinder Tail
Clamp GTO 46 / 52
HE46391
(C) Washer
P2732
(D) Cup Spring Washer
P11829
Torsion Rod For Torsion Gripper GTO
52
HE52213-2
Washup Tray Assembly
GT0 52
GT0 46
Form Roll Separator Handle - GTO 46/52
Threaded Bolt - GT0 52
(For HE52136)
P9134
Eccentric Stud Kit - Gt0 52
(For HE52136)
P4544
Sheet Guide - GT0 46/52, K-Series
Drive Side
HEK0R175-DS
Operator’s Side
HEK0R175-OS
Springs - GTO 46 / 52 - For Spring Rods.
(11.5 Mm X 43.0 Mm)
HE46413
(9 Mm X 70 Mm)
HE46519
(9.5 Mm X 62 Mm)
HE46798
HE52773
HE46773
P27407
HE52136
Stud - GTO 46 / 52 - Same For Both Upper And Lower
Delivery Rod Head. (This Stud Is Also Used On Plate
Cylinder Tail Clamp).
P7168
This Is Only A Sample Of Items Available
13
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Guide Strap GTO 46/52
Spring Clip For Guide Strap
HE462281
HE462321
Support Bar - With Needle Bearings
For GTO 52
HE52846
Timing Belt - Suction Drum GT0 52
P3806
Flexible Arm Shaft Assembly - GT0, GT0Z/P
P6202
Collar Only
P6743
Shaft Only
P6203
Hose - GT0 46/52
28 Inches (Hose To Feed Gripper)
55 Inches (Air Pump To Powder Spray) P5288
P5260
Sheet Smoother KOR, KORD, KORA, KORS
KOR Complete
KORD/KORA Complete
KORS Complete
(A) Spring Plate
(B) Screw
(C) Bar KOR
Bar KORD/KORA
Bar KORS
(D) Block
(E) Thumb Screw
** Bars Alone Have No Holes And Need To Be
Drilled Per Your Existing Block
Ink Distributor Adjusting Block K-Series
Drive Side Complete
HEK0R494K-DS
Operatores Side Complete
HEK0R494K-OS
(A) Cone Point Screw
P2132
(B) Spring
HE46896
(C) Latch
HEK0R494-L
(D) Stud
P7164
(E) Spring Washer
P11826
(F) Taper Pin
P431
(G) Journal Box
HEK0R494-JB
(H) Retaining Ring
P2771
(I) Needle Bearing
P2117
(J) Adjusting Screw
P2913
(K) Drive Side Block
HEK0R494-DS
Operators Side Block
HEK0R494-OS
Journal Box Housing Assy
HEK0R494-JBC
(Consists Of B, G, H, I & J)
Guide Piece - K-Series - Sheet Steadier Holder
HEKSØ89
Spring Guide (Tongue) - K-Series - For Conveyor
HEKØR420
Rubber Sleeve - K-Series - For Table Height Control
Bar
P8303
Plate Clamp Assembly – KORD 64
Complete
(A) Screw
(B) Upper Clamp
(C) Flat Washer
(D) Spring
(E) Lower Clamp
(F) Screw
(G) Washer
(H) Block
(I) Nut
(J) Set Screw
Variable Speed Pulley K-Series
Selector Safety Lever
HEK0R688
KORD 64 Adjusting Gear For Distributor Roller
HEK0RD516
14
Back Up/Feed Collar Assembly For Water Fountain
Roller K-Series
Complete
HEK0538
(A) Collar B&D Included
HEK0355
(B) Bearing
P3460
(C) Spring
P362130
(D) Roll Pin
P10452
(E) Cam Roller
P6838
(F) Stud
P7169
HEKORD367
P2008
HEKORD359
P10942
P12319
HEKORD353
P2105
P5519
HEK0755
P2604
P2510
P4291
HEK0R434
HEK0RD434
HEK0RS434
HEK0779
P2355
HEK0R483
HEK0RD483
HEK0RS483
HEK0R359
P2924
Ink Unit Over-Running Clutch Assembly – K-Series
Complete
(A) Retaining Ring
(B) Flat Washer
(C) Ring Washer
(D) Bearing Cage
(E) One-Way Clutch Bearing
(F) Bearing Cage
(G) Housing
(H) Sleeve
This Is Only A Sample Of Items Available
HEK0370
P2778
P2715
P2716
P3452
P3447
P3448
N/A
HEK0370-S
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Delivery Table Cable K-Series
HEK0971
Water Fountain End Support K-Series
HEK0R10102
Bearing Stud - For Table Height Control
Lever - K-Series
P7164
Ball Bearing For P7164
P838
Plastic Water Fountain Roller Bearing KOR
HEK0R10104
Spring For Traveiling Feed Gripper
K-Series
HEK0144
Spring - K-Series - For Ratchet Pawl On Delivery
Section.
P362130
Cylinder Brushes
KOR, KORA, KORD-62
KORD-64
KORS
P7659
P7657
P7658
Brake - K-Series - For Water Fountain Roller
HEKØ453
Spring - All K-Series
Located Inside Of Cap On The Outside Of Water Ductor
Roller - D/S
HEKØ408
Water Fountain Hose Clamp - K-Series
Clamp
Screw
Clean Up Hose - K Series
Delivery Side Jogger - All K-Series - O.S. / D.S.
Complete
(A)Shaft
(B) Jogger Plate
(C) Set Screw (To Lock Plate To Shaft)
(D) Set Screw (To Lock Guide Extension)
HEKØR347
P2022
P-5289
HEKS2160
HEKS2160-S
HEKS2160-P
P865
P2517
Spring - For Valve On Air Pump.
(25 Mm X 40 Mm)
HE-KØ280
Dampening Roller Adjustment Block
Complete
(A) Gear Shaft
(B) Spring
(C) Bracket
(D) Knurled Knob
(E) E-Ring
(F) Decal Washer
(G) Decal Washer
(H) Nut
HEK0R416
HEK0R304
HEK0R328
HEK0R418
P2946
P2754
P7464
P7465
P2603
Gripper Finger - All M-Series
Without Urethane
With Urethane
A
Sheet Stops
(1) KORD 62 Serial# 335790 & Below
(2) KORD 62 & 64 Serial# 335791 & Up
(3) KORD 64
(4) KORD 64 Serial# 335791 & Above
(5) KORA, KORD-64, KORS (Front – Side)
(6) KORA, KORD-62 (Front – Center)
(7) KORD-64, KORS (Front – Center)
(8) Rubber For 2 & 4 Only
HEM01050
HEM01020
B
Roller Tire
(A) Forwarding (Plastic)
(B) Hold Down (Steel)
HEK0RD2281-62
HEK0RD2282-62
HEK0RD2281-64
HEK0RD2282-64
HEK0rD2284
HEK0RD2283-62
HEK0RD228-64
HEKS15112
Water Oscillating Housing Assembly
K-Series
Operators Side
Drive Side (Shown)
HEKØ429
HEKØ431
HEM0454-P
HEM0454-S
Compression Spring - For Impression Cylinder Shaft
HE-M0153
Jogger Rod - M Series D.S.
HE-M01660
Spring - M Series Delivery Gripper Bar
Non-Opeartor Side
Operator Side
HEM01080
HEM01081
Shoulder Screw K-Series, SB Series
P-8178
Adjusting Worm Gear M-Series
This Is Only A Sample Of Items Available
HEM0416
15
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Center Pivot Bearing Housing
Speedmaster 72 & 102
Alcolor Drive Gear M-Series
HE721092
HEM0358AD
Gripper Bar Operating Lever SM 72 & 102
A
Journal M-Series
(A) D.S.
(B) O.S.
HEM0440
HEM0453
HE721040
Springs For Speedmaster 72/102
For Forwarding Sucker (21mmx50mm)
For Impression Gripper (14.5mmx45mm)
For Transfer Gripper (13.5mmx37mm)
On Ink Unit SM 102 (11.5mmx60mm)
HE72770
HE102843
HE102660
HE102673
B
Guide Roller Speedmaster 72/102, S-Series, M-Series
P72184
Suction Tape Speedmaster 74
Gray (Set Of 3)
Yellow ( Set Of 3)
P29988
P29989
Sheet Smoother M-Series
HEM0434
Alcolor Damp Drive Gear – Long For
Speedmaster 102
HE102358AD
Dog & Worm – Quickmaster 46/46DI
Dog & Worm Set
Worm – Ink/Water
Dog – Water
Pin
HE46464QM-K
HE46464QM
HE46428QM
P2834
Alcolor Segment For Cam Gear For Speedmaster 102
HE102366AD
Alcolor Intermediate Gear For Speedmaster 102
Large
HE102368-L
Small
HE102368-S
Sheet Steadier Brush Kit QM 46/46DI
(Includes All 9 Brushes Needed
With Screws)
Complete
P31134
Brush Only
HE46420QM
Screw
P2022
Dampening Felts QM 46/46DI
Quickamster 46 (No Holes)
Quickmaster 46DI
P11739
P11740
O.S. Journal For Metering Roller On Speedmaster
102
HE102453
Alcolor Speedmaster 102 Adjusting Nutfor Meter Roll
Drive Shaft
P6765
Tape Track For Guide Pulley Quickamster
46DI
HE463130DI
Cam Roller For Gripper Operating Lever
Speedmaster
P6871
Plate Spring Quickamster 46/46DI
4mm
HE46099QM-4MM
6mm
HE46099QM-6MM
A
Gear For Metering Roll - QM46
(A) Overall Length: 13.5mm
HE-46555QM
B
A
Grooved Gripper Pads - Speedmaster 72
(A) Cross Grooved
HE72422-CG
(B) Parallel Grooved
HE72422-PG
Grooved Gripper Pads - Speedmaster 102
(A) Cross Grooved
HE102422-CG
(B) Parallel Grooved
HE102422-PG
(C) Diamond Grooved
HE102422-DG
(B) Overall Length: 22mm
HE-46555QM-UG
Gripper Pads SM 72 & 102
Ultraviolet & Infrared Dryers
Standard
HE721061-U
HE721061
B
16
Pneumatic Spring Speedmaster 102
Delivery
P29990
Safety Guard
P29991
This Is Only A Sample Of Items Available
Gripper Pad SM Series Cross Groove
Operator’s Side
HE72442-0
Center
HE72442-C
Drive Side
HE72442-D
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Delivery Gripper With Holder – S-Series
Gripper Only
HESK1000
Holder With Hardware
HE721064
Grub Screw For Clutch Lever On Windmill
P2588
Spring For Throw-Off Lever On Feeder Section For
Windmill
HEWI934
Springs For S-Series
For Lifting Sucker
For Feed Drum
HES0170
HES0179
Over Running Clutch Assembly - All S-Series
Complete
HESØ259
(A) Lever
P320416
(B) Collar
P6786
(C) Bearing Race
HESØ261
(D) One Way Clutch Bearing
P3447
(E) Washer
P11810
(F) Retaining Ring
P2789
(G) Grease Fitting
P3677
Worm Housing For Ink Distributor Rollers
S-Series
Shut Off Valve For Water Bottle
S-Series
Axial Bearing Disk - For Feed Drum
Disk Washer (Race)
Hook S-Series
Jogger Rod S-Series
O.S.
D.S.
Water Fountain Tray
TOM, TOK
HEWI466
Windmill Roller Carriage Buffer Spring (32mmx98mm)
HEWI444
Bowden Cable For Windmill
HEWI3101
Spring For Handle On Front Lay Gayge Windmill
(5.5mmx22mm)
HEWI786
Adjusting Screw For Lay Bar On Windmill
39MM
HEWI35-39
32MM
HEWI35-32
HES0418
P11956
Sheet Smoother - SB-Series
Complete
(A) Block Only
(B) Thumb Screw
(C) Spacer Bracket
(D) Roll Pin
(E) Plate Spring
(F) Pan Head Screw
(G) Hex Head Screw
(H) Bar Only
Ink Distributor Runner
Windmil 10X15
Ball Bearing For Form Roller Shaft On Windmill
9.5mm ID
P11183
10mm ID
P838
Spring For Lever On Vibrating Roller
Windmill 10X15 (7.5mmX24mm)
HEWI522
HESBD568
HESBD359
P2923
HESBD573
P516
HESØ779
P2355
P2031
HESBD483
Spring For Speed Pulley On Windmill
(67mmX256mm)
HEWI046
P3422
P2722
P8704
HES01660-0
HES01660-D
HET0316
Spindle For Blanket Cylinder TOM, TOK
P27744
Powder Tube Nozzle For Windmill
HEWI6056
Powder Tuble Nozzle Tube For Windmill
HEWI6055
Spring Near Clutch Tongue On Drive Mechanism For
Windmill
(Conical – Maj. OD 8mm X OAL 9mm)
HEWI640
Emergency Kits - For Windmills 10X15, 13X18
Windmill 10 X 15
Consists Of:
(A) Ink Distributor Runners - (4 PCS)
(B) Bearings - (4 PCS)
(C) Wash Up Blade - (1 PC)
(D) Sucker Feet (3/16” ID) - (8 PCS)
(E) Sucker Feet (1/8” ID) - (8 PCS)
(F) Middle Sheet Separators - (2 PCS)
(G) End Sheet Separators - (2 PCS)
(H) Cylinder Jacket - (1 PC)
Windmill 13 X 18
Consists Of:
(B) Bearings For Ink Distributor Runners - (4 PCS Each)
(C) Wash Up Blade - (1 PC)
(D) Sucker Feet (5/32” ID) - (20 PCS Each)
(F) End Sheet Separators - (6 PCS Each)
(G) Middle Sheet Separators - (2 PCS Each)
(H) Cylinder Jacket - (1 PC)
This Is Only A Sample Of Items Available
P-30840
HE-WI466
P-11183
P-30209
P-7566
P-5234
HE-WI117
HE-WI114
P-30850
P-31140
P-11183
P-30243
P-7581
HE-WI114
HE-WI117
P-30858
17
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
18
This Is Only A Sample Of Items Available
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
This Is Only A Sample Of Items Available
19
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
20
This Is Only A Sample Of Items Available
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
This Is Only A Sample Of Items Available
21
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Open End Wrench
22mm, 19mm
17mm, 13mm
10mm, 8mm
13mm, 10mm
17mm, 14mm
27mm, 24mm
P30800
P30801
P30802
P5889
P5994
P5998
Allen Key
6mm
5mm
4mm
3mm
P5078
P5079
P5080
P5041
Slotted Screwdriver
Phillips Screwdriver
P5862
P5862-P
Pin Wrench
4mm, 6mm
3mm
11mm
P5875
P5876
P5992
Pressure Adj Spanner Wrench
For Speedmaster, M Series And S Series
P5877
Dampening Covers
Duroweave
GTO46
GTO52
KOR, KORA
KORD 62
KORD 64, MO SERIES
Red 1
GTO 46
GTO 52
Red Runner
GTO 46
GTO52
KORD62, KORD64, MO,
MOV
SORD
SORS, SORSZ
Hyton
GTO 46
GTO 52
3m Sleeve
GTO 46
GTO 52
KORD62/64
22
ZQ30130
ZQ30131
ZQ30132
ZQ30133
ZQ30134
RF-19
RF-21
BT-19
BT-21
BT-26
DT-37
DT-42
F2018
F800
18519
18822
19728
This Is Only A Sample Of Items Available
T-Handle Socket Wrench
13mm
17mm
P5878
P5882
Box Spanner Wrench
10mm
17mm
19mm
P5884
P5886
P5887
Wrench For Dist Cyl - Speedmaster
And S Series
P5891
Small Bearing Puller
P5896
Set Of 10 T-Handle Keys With Stand
Sizes: 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm,
5.5mm, 6mm, 8mm, 10mm.
8 Piece Metric Folding Hex Key Set
Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm,
5.5mm, 6mm
13 Piece Ball End Hex Key Set
Sizes: 1.27mm, 1.5mm, 2mm, 2.5mm, 3mm,
3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 8mm,
And 10mm
16 Piece Combination Wrench Set
Sizes: 6mm, 8mm To 15mm, 17mm, 19mm,
21mm, 22mm, 24mm, 30mm, And 32mm
405-272-0272 800-375-3787
405-232-3053 (FAX)
[email protected]
ppsokc.com
Notes
This Is Only A Sample Of Items Available
23
405-272-0272 800-375-3787
PRINTER’S PARTS STORE,
INC.
405-232-3053 (FAX)
ST
[email protected]
1708 NW 1 STREET
ppsokc.com
OKLAHOMA CITY, OK 73106
405-272-0272
800-375-3787
405-232-3053 FAX
[email protected]
www.ppsokc.com
This Flyer Is Only A Sample Of Our Total
Inventory!
Orders For In Stock Items Received By 2:00 P.M. CST Will Ship The Same
Day. Orders Received After 2:00 P.M. CST Will Ship If Possible.
Open: Monday Thru Friday 8:00A.M. - 5:00P.M. CST
Closed: New Years Day, Memorial Day, Independence Day, Labor Day,
Thanksgiving & Christmas
Large Inventory  New  Used  Rebuilt Printing Equipment, Replacement Parts, Rollers And Attachments For:
AB Dick  Multilith  Chief  Davidson  Itek  Heidelberg  T-51  Ryobi  Hamada  Baum  Martin Yale 
Profold  Kompac  Crestline  & Many More Over  90,000 Items In Stock
24
This Is Only A Sample Of Items Available