Rough Openings Guide - Monarch Windows and Doors

Transcription

M
Clad &Wood Windows and Doors
O N AW RI NCD OHW
S
A N D
D O O R S
CLL
DOUB
HUNG
EA D
AT
OW S
WP
IN
DIO
DOORS
Double Hung Window Features
Clad & Wood Details
2
Standard 49/16” Jamb with
option for factory applied
wider Extension Jambs.
Optional Clad Brickmould.
Sash clad of extra
thick .024 Roll
Formed Aluminum.
Poly Foam Air-Sealed
Adjustable and optional
E-Z tilt Balances, DP50
rated – White (White or
Cream units), Beige (Sand,
Bronze or Green units).
Standard 3/4” Clear Monarch
High Test Insulated Glass. Other
glazing options: Low-E , Bronze,
Gray and Obscure. All
available in Tempered.
Frame clad of .050
Extruded Aluminum with Low
Maintenance Electrostatic
Applied Polyester Enamel –
available in White, Cream,
Sand, Bronze or Green.
Butyl Glazing Sealant
for permanent life
and maximum
weatherability.
Graceful Interior
Sash Profile accepts
Monarch’s unique
Full Surround
Compression Grille.
Weatherstripped Top Sash ,
Bottom Sash and Check Rails.
Classic Mortise and
Tenon Corner Joint.
Standard Clear Pine Interiors.
Stout 17/16” thick Sash Rails
and Stiles on Vent Double
Hungs. Stout 17/16” thick
Sash on Picture Windows.
Standard 49/16” Jamb with
option for factory applied
wider Extension Jambs.
Lift Grooves on both
Top and Bottom Sash
Rails.
Standard Sill Trim.
Stout 17/16” thick Sash
Rails and Stiles on Vent
Double Hungs. Stout
17/16” thick Sash on
Picture Windows.
Standard Clad Sill
and Sill Nosing.
Optional Clad Sill Cap, automatically
applied with Brickmould option.
Optional PVC Brickmould (Wood
Brickmould is standard). Also
available with other Exterior Trims.
Butyl Glazing Sealant for
permanent life and
maximum weatherability.
Poly Foam air-Sealed
Adjustable and optional E-Z tilt
Balances, DP50 rated – White
is standard, Beige optional.
Graceful Interior Sash Profile
accepts Monarch’s unique Full
Surround Compression Grille.
Classic Mortise and Tenon Corner Joint.
Standard treated and primed
Wood Sill and Sill Nosing.
Lift Grooves on
both Top and
Bottom Sash Rails.
Optional Reversible Sill Trim.
Thermally broken clad
sill for improved
energy performance.
Standard 3/4” Clear Monarch
High Test Insulated Glass.
Other glazing options: Low-E,
Bronze, Gray and Obscure.
All available in Tempered.
Monarch’s Double Hung windows feature sash that can
easily be tilted, or completely removed, to make cleaning
a breeze. Even sash replacement can be achieved in mere
minutes by utilizing this no-fuss process.
Weatherstripped Top
Sash, Bottom Sash
and Check Rails.
Sash
Tilt
Clad Details
3
Clad TTrim
rim
Accessories
13/16”
17/8”
4”
Head Drip Fin
Use at the head of each clad
window or door for additional
protection against water leakage
Frame Expanders
Use for filling the space between the
new window and the existing wall to
give you a totally clad exterior
13/4”
Expansion Mullion
Use for a wide mullion or stud
pocket by inserting a frame
expander into each side. Will cover
an area from 21/4” in width
up to 8”
Standard
Mullion Cover
Use in combination with corrugated
staples at the interior to connect clad
windows and doors together
Horizontal Drip Mullion
Use in combination with corrugated
staples at the interior to connect
Clad Circle Top or Transoms to Clad
Outswing Doors
DOUBLE HUNG
CLAD PATIO
WINDOWS
DOORS
Double Hung Window Features
CLL
DOUB
HUNG
EA D
AT
OW S
WP
IN
DIO
DOORS
4
Double Hung Window Options
Technical Specifications
EXTERIOR
TRIM
Exterior Wood Trim is offered in various profiles –
WM180 Brickmould which is standard or optional
5/4x4, 1x4 and 1x6 – which can be used with or
without wood Backband trim. PVC (no rot)
Brickmould, along with 5/4x4, 1x4, 1x6 and 1x4BB
trim is also available.
Wood 1x4
Wood WM180
Brickmould
(11/8" x 2")
Wood
Backband
(1/2" x 1")
Wood 5/4x4
Wood 1x6
AND
SILL TRIM
Wood units come standard with treated and primed
wood sill and nosing (exterior). Clad sills are
standard on clad units and available on wood units.
Sill Trim (interior) is available in Standard and
Reversible trim on wood or clad sills. Reversible sill
trim must be used when the jamb thickness is greater
than 4-9/16” and for Grade 40 applications (Stool
applications cannot be used with a reversible sill trim).
Optional PVC sills /no stop is available on
wood DH’s with standard nosing or large nosing.
Reversible
Sill
Trim
Standard
Sill
Trim
Large
Sill
Nosing
PVC 1x4BB
(9/16" x 41/2" 13/16" on BB)
Both are shown with clad sill
Exterior Clad Brickmould is an
addition that gives clad units the
wide profile that is common on
most wood windows and
doors, adding 2-9/16” to
the outside frame width and 1-5/16” to the outside
frame height of a Double Hung unit. This optional
feature is
Standard Clad
Primed Sill
Caulked Joint
available
(If purchased by the
piece, the installer must
in all clad
caulk this joint)
colors
and on
Optional Clad Primed
all clad
Sill Nosing
units,
Shipping Skid
(excludClad Sill Cap
ing oval units and bay units).
Nail Fin
SILLS
Optional Clad
Brickmould
Jamb
Standard
Clad Exterior
SCREENS
Screens are optional on all vent window units. They
consist of a heavy, white aluminum
frame (3/4” x 7/16” .024 rollformed) with charcoal fiberglass
mesh. Spring loaded plungers
at the top make removal easy.
Half
screens are
available for radius vent
units. Specify screen
and color desired at the time of order.
Wood units come standard with
White screens. On clad units, the color is matched to
the exterior cladding finish.
GRILLES
FINISH
Wood exteriors are water-repellent, insect toxic treated
and primed. Clad exteriors encase the wood exterior
frame in .050 extruded aluminum clad and the wood
exterior sash in roll-formed .024 aluminum clad, all
with an applied low maintenance electrostatic polyester
enamel to resist scratches and make cosmetic upkeep
easier than ever imagined. Clad finish is available in
White, Cream, Sand, Bronze
or Green.
White
Cream
Sand
Bronze
Grilles are available and optional on all window
units. Monarch offers 3/4” or 1-1/8” Wood “KD” or
Full Surround Grilles in addition to “PDL” (Permanent
Divided Lite with mill finish (standard)
or Bronze finish (optional GBG), “SDL”
Full
(Simulated Divided Lite, No
Surround
Grille
GBG) available 3/4”, 1-1/8”, 2”
and 5/8” or 7/8” “GBG”
(Grilles Between the Glass) grille
configurations. Our “PDL” system
is the smart alternative to the old
True Divided Lite system –
KD Grille
GRILLES
Wood
KD and FS
7
3
/16"
7
/16"
Wood Grilles
available in
/4" and 11/8" grille
bar widths
The unique profile of Monarch’s
Full Surround Grille fastens
snuggly into window sash with
concealed compression clips, yet
can be easily removed for cleaning.
Monarch’s Double Hung Window units
come standard with high quality locks –
White with White balances (standard on
White & Cream Clad and Wood units), Oil
Rubbed Bronze with Beige balances
(standard on Sand, Bronze and Green Clad
units, also available on wood units).
JAMBS
Wood jambs are water-repellent and insect toxic
treated. The standard basic unit jamb width is
4-9/16”. Pine extension jambs are available for wall
thicknesses from 4-9/16” to 12”.
3
the initial cost is less, and better energy performance
guarantees years of lower energy bills. Exterior grille
bars will match the window finish as specified. Interior
bars are of Clear Ponderosa Pine. Exterior bars are
primed aluminum for wood units or White, Cream,
Sand, Bronze or Green aluminum finish for clad
units. “GBG” spacer bars are also available in all
seven (7) finish colors.
Monarch is expanding our GBG option by offering a
two-tone GBG (Bronze Exterior/White Interior, Sand
Exterior/White Interior), available in 5/8”
and 7/8”. Design options are limitless with
numerous standard lite layout options as well
as the availablity of optional custom lite layouts.
GBG
Glass
Glass
Aluminum
Grille Bar
Grilles-Betweenthe-Glass
available in
/8" and 7/8" grille
bar widths
5
PDL
Glass
(see below for details)
Glass
/ 4"
1
Monarch windows are standard with high test 3/4”
Clear, insulated glass. Glazing options include Clear,
Low E, Bronze, Gray or Obscure. All available in
annealed or tempered glass.
Attached
Wood
Interior
Grille
SDL
Glass
Glass
Glass
/ 4"
Attached
Aluminum
Exterior
Grille
/ 4"
Attached
Wood
Interior
Grille
Aluminum
Grille Bar
Attached
Aluminum
Exterior
Grille
CLAD NAIL FIN
Clad units will utilize fold-over nail fins
to protect the clad finish from
scratches and abrasions
during shipping. Nail fins then lock
into place for easy installation.
3
available in
3/4", 1-1/8" and 2” grille bar widths
Outside
Glass
Low-Emissivity Coating
1 2
3
4
Inside
Clear
Bronze
Obscure
Gray
Low Conductivity Spacer
Low-E
Permanent
Divided Lite Triple
Grid System
available in
bar widths
Simulated
Divided Lite
Twin Grid System
Surface
Attached
Aluminum
Exterior
Grille
Glass
1
1
Attached
Wood
Interior
Grille
Glass
Options
/4"
Wide Profile
1 1/ 8"
KD Grille push-pins –
for secure installation
into window unit.
HARDWARE
/4"
3
Green
Printing limitations make accurate color duplication impossible. For exact color matching,
please refer to actual color samples at your Monarch dealer.
GLAZING
5
(See right for details)
OL
UA
BD
L E PH
NG
DC
A TU
IO
WD
IN
OD
OO
RW
S S
Double Hung Window Options
CLAD
DOUBLE
HUNG
ATIO
WP
INDOWS
DOORS
Clad & Wood Double Hung Window Units
Sizing Specifications
2’4”
2’115/16”
2’17/16”
2’0”
20”
2’8”
2’515/16”
2’57/16”
2’4”
24”
3’0”
2’915/16”
2’97/16”
2’8”
28”
1832
2032
2432
2832
18310
20310
24310
1842
2042
1846
3’4”
3’115/16”
3’17/16”
3’0”
32”
3’8”
3’515/16”
3’57/16”
3’4”
36”
4’0”
3’915/16”
3’97/16”
3’8”
40”
3032
3432
3832
28310
30310
34310
38310
2442
2842
3042
3442
3842
2046
2446
2846
3046**
3446
3846
1852
2052
2452
2852
3052
3452
3852
1856
2056
2456
2856
3056
3456
3856
1856
2056
2456
2856
3056
3456
3856
4’23/16”
4’13/8”
4’07/8”
3’10”
20”
4’63/16”
4’53/8”
4’47/8”
4’2”
22”
4’103/16”
4’93/8”
4’87/8”
4’6”
24”
5’63/16”
5’53/8”
5’47/8”
5’2”
28”
5’103/16”
5’93/8”
5’87/8”
5’6”
30”
5’103/16”
5’93/8”
5’87/8”
5’6”
36”–24”
Even
Style
Cottage
Style
CLAD/WOOD
= Egress Size Units – Check Local Codes for exact requirements
** = 3046 meets Egress only when used with standard sill trim.
Standard Colonial
Prairie
Note:• All grilles shown are optional
Grille
Options
CLAD/WOOD
2’0”
1’915/16”
1’97/16”
1’8”
16”
3’63/16”
3’53/8”
3’47/8”
3’2”
16”
O
O
ut
si
de
R
B
.O
ut
M
.
Fr .
M
od
am
ul
G
e
a
la
ss r
6
2’4”
2’115/16”
2’17/16”
2’0”
20”
2’8”
2’515/16”
2’57/16”
2’4”
24”
3’0”
2’915/16”
2’97/16”
2’8”
28”
3’4”
3’115/16”
3’17/16”
3’0”
32”
3’8”
3’515/16”
3’57/16”
3’4”
36”
4’0”
3’915/16”
3’97/16”
3’8”
40”
1862
2062
2462
2862
3062
3462
3862
1866
2066
2466
2866
3066
3466
1870
2070
2470
2870
3070
3470
1876
2076
2476
2876
3076
3476
CLAD/WOOD
2’0”
1’915/16”
1’97/16”
1’8”
16”
7’103/16”
7’93/8”
7’87/8”
7’6”
42”
7’43/16”
7’33/8”
7’27/8”
7’0”
39”
6’103/16”
6’93/8”
6’87/8”
6’6”
36”
6’63/16”
6’53/8”
6’47/8”
6’2”
34”
O
O
ut
si
de
R
B
.O
ut
M
M . Fr .
od
am
ul
G
e
a
la
ss r
7
CLAD/WOOD
= Egress Size Units – Check Local Codes for exact requirements
Grille
Options
Standard Colonial
Prairie
CLAD PATIO
DOUBLE
HUNG
DOORS
WINDOWS
Clad & Wood Double Hung Window Units
3’0”
2’915/16”
2’97/16”
2’8”
291/2”
3’4”
3’115/16”
3’17/16”
3’0”
331/2”
4’4”
4’115/16”
4’17/16”
4’0”
451/2”
5’4”
5’115/16”
5’17/16”
5’0”
571/2”
6’4”
6’115/16”
6’17/16”
6’0”
691/2”
1832
2032
2432
2832
3032
4032
5032
6032
10310
18310
20310
24310
28310
30310
40310
50310
60310
1042
1842
2042
2442
2842
3042
4042
5042
6042
1046
1846
2046
2446
2846
3046
4046
5046
6046
1052
1852
2052
2452
2852
3052
4052
5052
6052
1856
2056
2456
2856
3056
4056
5056
6056
1056
1856
2056
2456
2856
3056
4056
5056
6056
1062
1862
2062
2462
2862
3062
4062
5062
6062
5’103/16”
5’93/8”
5’87/8”
5’6”
607/8”
5’63/16”
5’53/8”
5’47/8”
5’2”
567/8”
4’103/16”
4’93/8”
4’87/8”
4’6”
487/8”
4’63/16”
4’53/8”
4’47/8”
4’2”
447/8”
4’23/16”
4’13/8”
4’07/8”
3’10”
407/8”
1032
Even
Style
5’103/16”
5’93/8”
5’87/8”
5’6”
607/8”
1056
Cottage
Style
CLAD/WOOD
R OUGH O PENINGS
SASH WIDTH
Twin
Triple
1-8
OF
2-0
A SSEMBLED U NITS
2-4
2-8
3-0
3-4
433/8” 513/8” 593/8” 673/8”
753/8”
833/8”
6415/16” 7615/16” 8815/16” 10015/16” 11215/16” 12415/16”
Standard Colonial
Prairie
Note
Note: All grilles shown are optional
Grille
Options
CLAD/WOOD
2’8”
1’4”
2’0”
2’4”
1’115/16” 1’915/16” 2’115/16” 2’515/16”
1’17/16” 1’97/16” 2’17/16” 2’57/16”
1’0”
1’8”
2’0”
2’4”
91/2” 171/2”
211/2”
251/2”
3’63/16”
3’53/8”
3’47/8”
3’2”
327/8”
O
ut
O
ut
si
de
R
B
.O
M
.
Fr .
M
od
am
ul
G
ar e
la
ss
6’63/16”
6’53/8”
6’47/8”
6’2”
687/8”
CLAD
DOUBLE
HUNG
ATIO
WP
INDOWS
DOORS
8
Clad & Wood Double Hung Picture Window Units
3’57/8”
3’313/16”
3’35/16”
3’2”
16”
4’17/8”
3’1113/16”
3’115/16”
3’10”
20”
4’57/8”
4’313/16”
4’35/16”
4’2”
22”
4’97/8”
4’713/16”
4’75/16”
4’6”
24”
5’57/8”
5’313/16”
5’35/16”
5’2”
28”
5’97/8”
5’713/16”
5’75/16”
5’6”
30”
6’57/8”
6’313/16”
6’35/16”
6’2”
34”
3218
31018
4218
4618
5218
5618
6218
3220
31020
4220
4620
5220
5620
6220
3224
31024
4224
4624
5224
5624
6224
CLAD/WOOD
9
3’01/8”
2’111/2”
2’11”
2’8”
28”
2’81/8”
2’71/2”
2’7”
2’4”
24”
2’41/8”
2’31/2”
2’3”
2’0”
20”
2’01/8”
1’111/2”
1’11”
1’8”
16”
O
O
ut
si
de
R
B
.O
ut
M
M . Fr .
od
a
u l me
G
a
la
ss r
CLAD PATIO
DOUBLE
HUNG
DOORS
WINDOWS
Clad & Wood Double Hung Sliding Window Units
31028
4228
4628
5228
5628
6228
3230
31030
4230
4630
5230
5630
6230
3234
31034
4234
4634
5234
5634
6234
3238
31038
4238
4638
5238
5638
6238
4’01/8”
3’111/2”
3’11”
3’8”
40”
3’81/8”
3’71/2”
3’7”
3’4”
36”
3’41/8”
3’31/2”
3’3”
3’0”
32”
3228
CLAD/WOOD
= Egress Size Units as long as window sill is less than 42” from floor - Check Local Codes for exact requirements
Biege Vinyl Head & Sill Tracks
Smallest size 2/6 x 1/4 modular opening
Largest size 6/2 x 5/0 modular opening
Grille
Options
Standard Colonial
Prairie
= Egress Size
Units, as long
as window sill is
less than 42”
from floor –
Check Local
Codes for exact
requirements
CLAD
DOUBLE
HUNG
PATIO
TRANSOMS
DOORS
10
Transoms
for double hung windows
C ONTINUOUS T RANSOMS
CLAD/WOOD
WIDTH
Double Hung
Transoms
1-0
Sgl
1’4”
Outside Brickmould
Rough Opening Width 1’115/16”
1’17/16”
Outside Frame
81/2”
Glass Width
1x1
Lite Pattern
CLAD/WOOD
WIDTH
Outside Brickmould
Rough Opening Width
Outside Frame
Glass Width
Lite Pattern
1-8
Twin
3’91/2”
3’77/16”
3’615/16”
3715/16”
4x1
FOR
2-0
Twin
4’51/2”
4’37/16”
4’215/16”
4515/16”
4x1
Stand Alone
CLAD
HEIGHT
1-0
S INGLE , T WIN & T RIPLE D OUBLE H UNG U NITS
5-0
6-0
1-8
2-0
2-4
2-8
3-0
3-4
4-0
Sgl
Sgl
Sgl
Sgl
Sgl
Sgl
Sgl
Sgl
Sgl
2’0”
2’4”
5’4”
2’8”
3’0”
3’4”
3’8”
4’4”
6’4”
1’915/16” 2’115/16” 2’515/16” 2’915/16” 3’115/16” 3’515/16” 4’115/16” 5’115/16” 6’115/16”
1’97/16” 2’17/16” 2’57/16” 2’97/16” 3’17/16” 3’57/16” 4’17/16” 5’17/16” 6’17/16”
161/2”
201/2”
241/2”
281/2”
321/2”
361/2”
441/2”
561/2”
681/2”
2x1
2x1
3x1
3x1
3x1
4x1
5x1
5x1
7x1
1-2
2-4
Twin
5’11/2”
4’117/16”
4’1015/16”
5315/16”
6x1
2-8
Twin
5’91/2”
5’77/16”
5’615/16”
6115/16”
6x1
3-0
Twin
6’51/2”
6’37/16”
6’215/16”
6915/16”
6x1
2-4
1-8
2-0
Triple Triple Triple
7’7”
5’7”
6’7”
5’415/16” 6’415/16” 7’415/16”
5’47/16” 6’47/16” 7’47/16”
831/2”
591/2”
711/2”
9x1
6x1
6x1
Combination
1-0
1-2
1’33/8”
1’53/8” 1’23/4” 1’43/4”
Outside Brickmould
Rough Opening Height 1’115/16” 1’315/16” 1’15/16” 1’35/16”
1’17/16” 1’37/16” 1’013/16” 1’213/16”
Outside Frame
81/2”
81/2”
101/2”
101/2”
Glass Height
*Wood Stand Alone Transoms Heights add 1-1/8” for wood subsill or
1-1/4” for PVC subsill
CLAD/WOOD
COMBINATION R.O. HEIGHTS
3-2
3-10
4-2
4-6
5-2
5-6
6-2
6-6
Rough Opening w/ 10” Transoms 4’413/16” 5’013/16” 5’413/16” 5’813/16” 6’413/16” 6’813/16” 7’413/16” 7’813/16”
Rough Opening w/ 12” Transoms 4’613/16” 5’213/16” 5’613/16” 5’1013/16” 6’613/16” 6’1013/16” 7’613/16” 7’1013/16”
*Combination Rough Opening Heights are the same for clad and wood.
Monarch Twin
Double Hung
Window unit with
continuous
transoms (two
continuous
Double Hung
transoms).
2x1
Standard Colonial
3x1
Standard Colonial
6x1
Standard Colonial
7x1
Standard Colonial
Monarch Twin
Double Hung
Window unit with
composite transoms
(two composites,
each with two
Double Hung
transoms).
4x1
Standard Colonial
9x1
Standard Colonial
Combination
Options
5x1
Standard Colonial
Prairie
Note: Custom units with
glass height greater
than 12” will have 2
horizontal bars
(optional).
11
LAD PATIO
OUBLE HUNG
DC
OORS
TD
RANSOMS
Transoms
CIRCLE TOP TRANSOMS*
1-8
Sgl
Outside BM Width
2’0”
Outside BM Height
1’011/16”
Rough Opening Height 0’117/32”
Outside Frame Width
1’97/16”
Outside Frame Height 0’1023/32”
Glass Width
195/8”
Glass Height
831/32”
Standard Grille
1
Optional Grille
N/A
2-0
CLAD/WOOD CONT.
Twin
CLAD/WOOD
Outside BM Width
Outside BM Height
Rough Opening Width
Rough Opening Height
Outside Frame Width
Outside Frame Height
Glass Width
Glass Height
Standard Grille
Optional Grille
2-4
Sgl
2’8”
1’411/16”
2’515/16”
1’37/32”
2’57/16”
1’223/32”
275/8”
1231/32”
1
N/A
2-8
Twin
2-8
Sgl
3’0”
1’611/16”
2’915/16”
1’57/32”
2’97/16”
1’423/32”
315/8”
1431/32”
1
N/A
3-0
Twin
3-8
3-4
3-0
Sgl
Sgl
Sgl
4’0”
3’8”
3’4”
1’811/16” 1’1011/16” 2’011/16”
3’115/16” 3’515/16” 3’915/16”
1’77/32” 1’97/32” 1’117/32”
3’17/16” 3’57/16” 3’97/16”
1’623/32” 1’823/32” 1’1023/32”
3521/32” 3921/32” 4321/32”
1631/32” 1831/32” 2031/32”
1
1
1
3
3
N/A
2-0
Triple
5’91/2”
2’1113/32”
5’77/16”
2’915/16”
5’67/8”
2’97/16”
653/32”
3111/16”
2
6
6’51/2”
3’313/32”
6’37/16”
3’115/16”
6’27/8”
3’17/16”
733/32”
3511/16”
2
6
6’7”
3’43/16”
6’47/16”
3’223/32”
6’47/16”
3’27/32”
7421/32”
3615/32”
2
7
2-0
Sgl
2’4”
1’211/16”
2’115/16”
1’17/32”
2’17/16”
1’023/32”
235/8”
1031/32”
1
N/A
2-4
Twin
4’51/2”
5’11/2”
2’313/32” 2’713/32”
4’37/16” 4’117/16”
2’115/16” 2’515/16”
4’27/8” 4’107/8”
2’17/16” 2’57/16”
493/32”
573/32”
2311/16” 2711/16”
1
1
4
6
6-0
4-0
5-0
Sgl
Sgl
Sgl
5’4”
6’4”
4’4”
2’211/16” 2’811/16” 3’211/16”
4’115/16” 5’115/16” 6’115/16”
2’17/32” 2’77/32” 3’17/32”
4’17/16” 5’17/16” 6’17/16”
2’023/32” 2’623/32” 3’023/32”
4721/32” 5921/32” 7121/32”
2231/32” 2831/32” 3431/32”
1
2
2
4
5
6
#1 - 5 Lite
Standard
Hub
#2 - 7 Lite
Standard
Hub
#3 - 6 Lite
Optional
Hub
#5 - 13 Lite
Optional
Hub
#6 - 19 Lite
Optional
Hub
#7 - 14 Lite
Optional
Hub
Circle Top
Transoms
#4 - 9 Lite
Optional
Hub
#9 Cathedral
** Wood Outside Brickmould height listed. For Clad Outside Brickmould height –
subtract 1/16”.
QUARTER CIRCLE TRANSOMS*
CLAD/WOOD
2-0
Outside BM Width
Outside BM Height
Rough Opening Width
Outside Frame Width
Glass Width
Glass Height
Standard Grille
Optional Grille
2’4”
2’313/32”
2’115/16”
2’115/16”
2’17/16”
2’17/16”
2311/16”
2311/16”
1
2
2-4
2-8
2’8”
3’0”
2’713/32” 2’1113/32”
2’515/16” 2’915/16”
2’515/16” 2’915/16”
2’57/16” 2’97/16”
2’57/16” 2’97/16”
2711/16” 3111/16”
2711/16” 3111/16”
1
1
3
3
3-0
3-4
3-8
3’4”
4’0”
3’8”
3’313/32” 3’713/32” 3’1113/32”
3’115/16” 3’515/16” 3’915/16”
3’115/16” 3’515/16” 3’915/16”
3’17/16” 3’57/16” 3’97/16”
3’17/16” 3’57/16” 3’97/16”
3511/16” 3911/16” 4311/16”
3511/16” 3911/16” 4311/16”
1
1
1
3
4
4
4-0
5-0
6-0
4’4”
4’313/32”
4’115/16”
4’115/16”
4’17/16”
4’17/16”
4711/16”
4711/16”
1
5
5’4”
5’313/32”
5’115/16”
5’115/16”
5’17/16”
5’17/16”
5911/16”
5911/16”
1
5
6’4”
6’313/32”
6’115/16”
6’115/16”
6’17/16”
6’17/16”
7111/16”
7111/16”
1
6
Left Hand
Right Hand
Quarter Circle
Transoms
** Wood Outside Brickmould height listed. For Clad Outside Brickmould height – subtract 1/16”.
#1 - 4 Lite
Standard
Hub
#2 - 4 Lite
Optional
Hub
Combination
Options
#3 - 7 Lite
Optional
Hub
#4 - 13 Lite
Optional
Hub
#5 - 17 Lite
Optional
Hub
#6 - 25 Lite
Optional
Hub
#9 Cathedral
Note: Cathedral Grilles
*Note:
• The number of bars wide depends on
the overall unit width
Small radius “GBG” Hubs must
be manufactured with 5/8”
“GBG” stock – even though
remaining bars may be 7/8”
• The grille bars are evenly spaced and
will not line up with the window below
Monarch Picture
Window, two Double
Hung Window units,
Double Hung
Transom, and four
Quarter Circle
Transoms.
Monarch Twin
Double Hung
Window unit
and Circle
Top Transom.
Note: Radius Units – All dimensions are engineered calculations. Variations in Unit Width should not exceed 1/8” of engineered specifications. Brickmould widths may vary up to 1/4” of engineered calculations. All height specifications may vary
as much as 3/8” to the engineered dimensions. These are considered normal variations for arched head products.
CLAD
DOUBLE
HUNG
PATIO
TRANSOMS
DOORS
12
Transoms
S EGMENT T RANSOMS
2-0
Sgl
2’4”
Outside BM Width
1’6”
Outside BM Height
2’115/16”
R.O. Width
1’49/16”
R.O. Height
2’17/16”
Outside Frame Width
1’41/16”
Leg Height Outside Frame 1’1”
233/4”
Glass Width
145/16”
Glass Height
1
Standard Grille
N/A
Optional Grille
CLAD/WOOD
Segment
Transoms
2-4
Sgl
2’8”
1’61/16”
2’515/16”
1’45/8”
2’57/16”
1’41/8”
1’1”
273/4”
143/8”
1
N/A
3-4
2-8
3-0
Sgl
Sgl
Sgl
3’8”
3’4”
3’0”
1’75/8”
1’71/16” 1’63/4”
2’915/16” 3’115/16” 3’515/16”
1’55/8” 1’55/16” 1’63/16”
2’97/16” 3’17/16” 3’57/16”
1’51/8” 1’413/16” 1’511/16”
1’1”
1’1”
1’1”
393/4”
313/4”
353/4”
153/8”
151/16” 1515/16”
1
1
1
N/A
N/A
N/A
2-8
2-0
2-4
3-0
Twin
Twin
Twin
Twin
1
1
6’51/2”
5’1 /2”
4’5 /2”
5’91/2”
Outside BM Width
1’101/4” 1’1015/16” 2’19/16” 2’11/4”
Outside BM Height
4’37/16” 4’117/16” 5’77/16” 6’37/16”
Rough Opening Width
2’01/8” 1’1111/16”
Rough Opening Height 1’813/16” 1’91/2”
4’215/16” 4’1015/16” 5’615/16” 6’215/16”
Outside Frame Width
1’85/16”
1’9”
1’115/8” 1’113/16”
1’1”
1’1”
1’1”
Leg Height Outside Frame 1’1”
731/4”
571/4”
491/4”
651/4”
Glass Width
219/16”
189/16”
191/4”
217/8”
Glass Height
2
2
2
2
Standard Grille
3
N/A
N/A
Optional Grille
3
CLAD/WOOD CONT.
2-0
Triple
6’7”
2’19/16”
6’415/16”
2’01/8”
6’47/16”
1’115/8”
1’1”
7411/16”
217/8”
2
3
3-8
4-0
5-0
Sgl
Sgl
Sgl
5’4”
4’4”
4’0”
1’815/16” 1’913/16” 1’113/4”
3’915/16” 4’115/16” 5’115/16”
1’71/2”
1’83/8” 1’105/16”
3’97/16” 4’17/16” 5’17/16”
1’7”
1’77/8” 1’913/16”
1’1”
1’1”
1’1”
4311/16”
473/4”
593/4”
171/4”
181/8”
201/16”
1
1
2
N/A
N/A
3
The leg height
of a Segment
Transom refers
to the side
measurement as
shown above.
6-0
Sgl
6’4”
2’011/16”
6’115/16”
1’111/4”
6’17/16 ”
1’103/4”
1’1”
713/4”
21”
2
3
#1 - 5 Lite
Standard
Hub
#2 - 7 Lite
Standard
Hub
#3 - 13 Lite
Optional
Hub
#9 Cathedral
The outside frame
height of a
Segment Transom
refers to the
measurement at
the highest point
as shown above.
subtract 1/16”.
L EFT H AND / R IGHT H AND S EGMENT T RANSOMS
CLAD/WOOD
Left Hand
Right Hand
Segment
Transoms
Outside BM Width
Outside BM Height
R.O. Width
R.O. Height
Outside Frame Width
Leg Height Outside Frame
Glass Width
Glass Height
Standard Grille
Optional Grille
2-0
Sgl
2’4”
1’6”
2’115/16”
1’49/16”
2’17/16”
1’41/16”
1’1”
233/4”
145/16”
1
N/A
2-4
Sgl
2’8”
1’61/16”
2’515/16”
1’45/8”
2’57/16”
1’41/8”
1’1”
273/4”
143/8”
1
N/A
3-4
2-8
3-0
Sgl
Sgl
Sgl
3’8”
3’4”
3’0”
1’75/8”
1’71/16” 1’63/4”
2’915/16” 3’115/16” 3’515/16”
1’55/8” 1’55/16” 1’63/16”
2’97/16” 3’17/16” 3’57/16”
1’51/8” 1’413/16” 1’511/16”
1’1”
1’1”
1’1”
393/4”
313/4”
353/4”
153/8”
151/16” 1515/16”
1
1
1
N/A
N/A
N/A
2-8
2-0
2-4
3-0
Twin
Twin
Twin
Twin
5’11/2”
6’51/2”
4’51/2”
5’91/2”
Outside BM Width
1’101/4” 1’1015/16” 2’19/16” 2’11/4”
Outside BM Height
4’37/16” 4’117/16” 5’77/16” 6’37/16”
Rough Opening Width
2’01/8” 1’1111/16”
Rough Opening Height 1’813/16” 1’91/2”
6’27/8”
4’27/8”
4’107/8” 5’67/8”
Outside Frame Width
1’85/16”
1’9”
1’115/8” 1’113/16”
1’1”
1’1”
1’1”
1’1”
Leg Height Outside Frame
731/4”
491/4”
571/4”
651/4”
Glass Width
219/16”
189/16”
191/4”
217/8”
Glass Height
2
2
2
2
Standard Grille
3
N/A
N/A
3
Optional Grille
CLAD/WOOD CONT.
2-0
Triple
6’7”
2’19/16”
6’415/16”
2’01/8”
6’47/16”
1’115/8”
1’1”
743/4”
217/8”
2
3
3-8
Sgl
4’0”
1’815/16”
3’915/16”
1’71/2”
3’97/16”
1’7”
1’1”
4311/16”
171/4”
1
N/A
4-0
5-0
Sgl
Sgl
5’4”
4’4”
1’913/16” 1’113/4”
15
4’1 /16” 5’115/16”
1’83/8” 1’105/16”
4’17/16” 5’17/16”
1’77/8” 1’913/16”
1’1”
1’1”
473/4”
593/4”
181/8”
201/16”
1
2
N/A
3
The leg height
of a Left/Right
Hand Segment
Transom refers
to the side
measurement
as shown
above.
6-0
Sgl
6’4”
2’011/16”
6’115/16”
1’111/4”
6’17/16 ”
1’103/4”
1’1”
713/4”
21”
2
3
#1 - 3 Lite
Standard
Hub
#3 - 7 Lite
Optional
Hub
#2 - 4 Lite
Optional
Hub
#9 Cathedral
The outside frame
height of a Left/
Right Hand
Segment Transom
refers to the
measurement at the
highest point as
shown above.
subtract 1/16”.
Monarch Triple
Double Hung
Window Unit with
Elliptical Transom.
Monarch Picture
Window, two Double
Hung Window units,
Double Hung
Transom, and four
Quarter Circle
Transoms.
Monarch Quad Double
Hung Window Unit with
two Double Hung
Transoms and two
Left-Hand/Right-Hand
Segment Transoms.
Combination
Options
Note: Radius Units – All dimensions are engineered calculations. Variations in Unit Width should not exceed 1/8” of engineered specifications. Brickmould widths may vary up to 1/4” of engineered calculations. All height specifications may vary as
much as 3/8” to the engineered dimensions. These are considered normal variations for arched head products.
CLAD PATIO
DOUBLE
HUNG
DOORS
TRANSOMS
Transoms
13
E LLIPTICAL T RANSOMS *
2-4
Sgl
2’8”
Outside BM Width
1’315/32”
Outside BM Height
1’2”
Outside Frame Width
2’57/16”
1’11/2”
275/8”
Glass Width
Glass Height
113/4”
Standard Grille
1
Optional Grille
N/A
2-0
CLAD/WOOD CONT.
Twin
6-0
3-8
3-4
2-8
3-0
4-0
5-0
Sgl
Sgl
Sgl
Sgl
Sgl
Sgl
Sgl
4’0”
3’8”
3’0”
4’4”
3’4”
5’4”
6’4”
1’315/16” 1’415/32” 1’415/16” 1’515/32” 1’515/16” 1’715/32” 1’815/16”
2’915/16” 3’115/16” 3’515/16” 3’915/16” 4’115/16” 5’115/16” 6’115/16”
1’4”
1’31/2”
1’21/2”
1’3”
1’41/2”
1’6”
1’71/2”
2’97/16” 3’17/16” 3’57/16” 3’97/16” 4’17/16” 5’17/16” 6’17/16”
1’31/2”
1’3”
1’2”
1’21/2”
1’4”
1’51/2”
1’7”
435/8” 475/8”
395/8”
315/8”
715/8”
355/8”
595/8”
3
13 /4” 141/4”
131/4”
121/4”
123/4”
153/4”
171/4”
1
1
1
1
1
2
2
N/A
N/A
N/A
N/A
N/A
3
3
2-8
3-0
2-0
2-4
Twin
Twin
Triple
Twin
4’51/2”
1’515/16”
Outside Frame Width
4’215/16”
Outside Frame Heigtht
1’4”
Glass Width
491/16”
Glass Height
141/4”
Standard Grille
2
Optional Grille
N/A
6’51/2”
5’91/2”
5’11/2”
6’7”
1’615/16” 1’715/16” 1’815/16” 1’915/32”
7
7
7
4’11 /16” 5’7 /16” 6’3 /16” 6’415/16”
1’61/2”
1’71/2”
1’51/2”
1’8”
4’1015/16” 5’615/16” 6’215/16” 6’47/16”
1’6”
1’7”
1’71/2”
1’5”
571/16” 651/16” 731/16”
741/2”
161/4”
171/4”
151/4”
173/4”
2
2
2
2
3
3
N/A
3
CLAD/WOOD
Outside BM Width
Outside BM Height
#1 - 5 Lite
Standard
Hub
#2 - 7 Lite
Standard
Hub
#3 - 13 Lite
Optional
Hub
#9 Cathedral
*Note: Small radius “GBG” Hubs
must be manufactured with 5/8”
remaining bars may be 7/8”.
Elliptical
Transoms
subtract 1/16”.
Call customer service on custom height Ellipticals.
E YEBROW T RANSOMS *
2-8
2-4
3-0
3-4
Sgl
Sgl
Sgl
Sgl
3’0”
Outside BM Width
2’8”
3’4”
3’8”
Outside BM Height
1’315/32” 1’315/16” 1’415/32” 1’415/16”
Rough Opening Width 2’515/16” 2’915/16” 3’115/16” 3’515/16”
1’21/2”
1’2”
1’3”
1’31/2”
Outside Frame Width
2’57/16” 2’97/16” 3’17/16” 3’57/16”
1’2”
1’11/2”
1’21/2”
1’3”
Glass Width
315/16”
271/2”
351/8” 3815/16”
Glass Height
121/4”
123/4”
131/4”
113/4”
Standard Grille
1
1
1
1
Optional Grille
N/A
N/A
N/A
N/A
2-8
3-0
2-0
2-4
CLAD/WOOD CONT.
Twin
Twin
Twin
Twin
CLAD/WOOD
Outside BM Width
Outside BM Height
Rough Opening Width
Outside Frame Width
Glass Width
Glass Height
Standard Grille
Optional Grille
5’11/2”
4’51/2”
1’515/16” 1’615/16”
4’37/16” 4’117/16”
1’41/2”
1’51/2”
4’215/16” 4’1015/16”
1’4”
1’5”
48”
553/4”
141/4”
151/4”
2
2
N/A
N/A
6’51/2”
5’91/2”
1’715/16” 1’815/16”
5’77/16” 6’37/16”
1’61/2”
1’71/2”
5’615/16” 6’215/16”
1’6”
1’7”
639/16”
713/8”
161/4”
171/4”
2
2
3
3
4-0
5-0
Sgl
Sgl
4’4”
5’4”
4’0”
1’515/32” 1’515/16” 1’715/32”
3’915/16” 4’115/16” 5’115/16”
1’41/2”
1’6”
1’4”
3’97/16” 4’17/16” 5’17/16”
1’4”
1’51/2”
1’31/2”
435/8” 4611/16” 585/16”
141/4”
153/4”
133/4”
1
2
1
N/A
3
N/A
2-0
Triple
3-8
Sgl
6-0
Sgl
6’4”
1’815/16”
6’115/16”
1’71/2”
6’17/16”
1’7”
70”
171/4”
2
3
#1 - 5 Lite
Standard
Hub
#2 - 7 Lite
Standard
Hub
#3 - 13 Lite
Optional
Hub
#9 Cathedral
*Note: Small radius “GBG” Hubs
must be manufactured with 5/8”
remaining bars may be 7/8”.
6’7”
1’915/32”
6’415/16”
1’8”
6’47/16 ”
1’71/2”
7213/16”
173/4”
2
3
subtract 1/16”.
Call customer service on custom height Eyebrows.
• The number of bars wide depends on the
overall unit width
• The grille bars are evenly spaced and will
not line up with the window below.
Combination
Options
Monarch Triple
Double Hung
Window Unit with
Elliptical Transom.
Monarch Quad Double
Hung Window Unit with
two Double Hung
Transoms and two
Left-Hand/Right-Hand
Segment Transoms.
Eyebrow
Transoms
CLAD
DOUBLE
HUNG
ATIO
WP
INDOWS
DOORS
Clad & Wood Fixed Picture Units
14
All units are Direct Set
C IRCLE T OP P ICTURE W INDOWS
CLAD/WOOD
WIDTH
2-0
2-4
2-8
20
4-0
3-0
5-2
5-0
Outside BM
2’4”
2’8”
3’4”
4’4”
5’4”
5’6”
3’0”
Rough Opening 2’2”
2’6” 2’10” 3’2”
4’2”
5’2”
5’4”
Outside Frame 2’11/2” 2’51/2” 2’91/2” 3’11/2” 4’11/2” 5’11/2” 5’31/2”
Glass
233/4” 273/4” 313/4” 353/4” 473/4” 593/4” 613/4”
Circle Top
CLAD/WOOD
HEIGHT
Note:
Small radius “GBG” Hubs
must be manufactured
with 5/8” “GBG” stock –
even though remaining
bars may be 7/8”.
4-6
5-2
5-6
6-2
7-0
6-0
6’4”
6’2”
6’11/2”
713/4”
24
28
30
Sample Matrix
40
50
52
60
46
+
52
+
+
+
+
+
+
+
+
++
+
++
56
62
8-0
Outside BM
4’915/32” 5’515/32” 5’915/32” 6’515/32” 7’315/32” 8’315/32”
5’4”
5’8”
6’4”
7’2”
8’2”
Outside Frame 4’71/2” 5’31/2” 5’71/2” 6’31/2” 7’11/2” 8’11/2”
533/4” 613/4” 653/4” 733/4” 833/4” 953/4”
Glass
Note:
All units come standard
with annealed glass
except as noted below:
+ = We recommend
that units over 30 sq. ft.
(4080, 5056, 5062,
5070, 5080, 5256,
5262, 5270, 6052,
6056, 6062) be glazed
with tempered glass.
++ = Units over 40
sq. ft. (5280, 6070) are
available with tempered
glass only.
70
+
80
Measurements are units with standard stop flat sills
** Wood Outside Brickmould height listed. For Clad Outside Brickmould
Width & Height – subtract 1/16”.
E LLIPTICAL P ICTURE W INDOWS
CLAD/WOOD
WIDTH
Outside BM
Rough Opening
Outside Frame
Glass
Elliptical
Note:
“GBG” & “PDL” grilles
are not available in Prairie
or Cathedral.
4-0
4’41/16”
4’2”
4’11/2”
473/4”
5-0
5-2
5’41/16” 5’61/16”
5’4”
5’2”
5’11/2” 5’31/2”
3
59 /4” 613/4”
Sample Matrix
50
40
CLAD/WOOD
HEIGHT
4-6
5-2
4’915/32” 5’515/32”
Outside BM
5’4”
Outside Frame 4’71/2” 5’31/2”
533/4” 613/4”
Glass
52
46
52
P ALLADIAN W INDOW U NITS
CLAD/WOOD
WIDTH
1-0|3-0|1-0
Outside BM
5’7 /8”
5’51/8”
Rough Opening
5’45/8”
Outside Frame
113/4”|353/4”|113/4”
Glass
1
Palladian
CLAD/WOOD
HEIGHT
Outside BM
Rough Opening
Outside Frame
Shoulder (OF)
Glass
3-2
3-10
4-6
5-2
6-0
3’515/32”
3’4”
3’31/2”
1’83/4”
373/4”
4’115/32”
4’0”
3’111/2”
2’43/4”
453/4”
4’915/32”
4’8”
4’71/2”
3’03/4”
533/4”
5’515/32”
5’4”
5’31/2”
3’83/4”
613/4”
6’315/32”
6’2”
6’11/2”
4’63/4”
713/4”
6-2
7-8
6’515/32” 7’1115/32”
6’4”
7’10”
6’31/2” 7’91/2”
4’83/4” 6’23/4”
733/4”
913/4”
Note:
Palladian Window
Shoulder Heights are the
same for clad and wood.
103010-32
Unit Height references
overall height of the
Circle Top Picture
Window.
103010-310
103010-46
Sample Matrix
103010-52
103010-60
103010-62
103010-78
*Note:
· All grilles shown are optional
Standard
Colonial
Prairie
Cathedral
Standard
Colonial
Prairie
Cathedral
Standard
Colonial
Prairie
Cathedral
· Small radius “GBG” Hubs must be manufactured
with 5/8” “GBG” stock – even though remaining
bars may be 7/8”
15
All units are Direct Set
S EGMENT H EAD P ICTURE W INDOWS
CLAD/WOOD
WIDTH
4-0
5-0
6-0
Outside BM
4’41/16”
Outside Frame 4’11/2”
Glass
473/4”
Radius Rise
67/8”
5’41/16”
5’2”
5’11/2”
593/4”
813/16”
6’41/16”
6’2”
6’11/2”
713/4”
93/4”
CLAD/WOOD
HEIGHT
3-2
3-10
Note:
40
50
60
32
310
When mulled to
double hungs,
segment picture
windows require a
sloped sill. Specify
when ordering.
Note:
46
4-6
5-2
5-6
*
6-2
52
Outside BM
Shoulder height + radius rise + 2”
Shoulder Height (OSF) 3’47/8” 4’07/8” 4’87/8” 5’47/8” 5’87/8” 6’47/8”
Listed by width, see above
Radius Rise
Shoulder height + radius rise + 1/2”
Rough Opening
Shoulder height + radius rise
Outside Frame
Shoulder height + radius rise - 13/4”
Glass
*
56
**
*
62
All units come
with annealed
glass, except
6062:
* = We
recommend that
units over 30 sq.
ft. (5062, 6052,
6056) be glazed
with Tempered
Glass.
** = 6062
available with
Tempered
Glass only.
Segment Head
Note:
Top of Double Hung
frame lines up with
shoulder on segment
units.
Shoulder height does not
include subsill or sill nosing.
Trim accessories may effect
Rough Opening and
Masonry Opening.
L/R S EGMENT H EAD P ICTURE W INDOWS
CLAD/WOOD
WIDTH
2-0
2-4
2-8
Outside BM
2’4”
2’8”
3’0”
2’6”
2’10”
Outside Frame 2’11/2” 2’51/2” 2’91/2”
Glass
233/4” 273/4” 313/4”
Radius Rise
75/16” 81/16” 105/8”
3-0
4-0
5-0
5-2
6-0
3’4”
4’4”
5’4”
5’6”
6’4”
3’2”
4’2”
5’2”
5’4”
6’2”
3’11/2” 4’11/2” 5’11/2” 5’31/2” 6’11/2”
353/4” 473/4” 593/4” 613/4” 713/4”
103/16” 67/8” 103/4” 103/4” 151/2”
CLAD/WOOD
HEIGHT
4-6
Outside BM
Shoulder Hgt (OSF) 4’87/8”
Radius Rise
Rough Opening
Outside Frame
Glass
5-2
5-6
6-2
6-6
7-0
8-0
Shoulder height + radius rise + 2”
5’47/8” 5’87/8” 6’47/8” 6’87/8” 7’0”
8’0”
Listed by width, see above
20
24
28
CLAD PATIO
DOUBLE HUNG
DOORS
WINDOWS
Clad & Wood Fixed Picture Units & Palladian Window Units
30
40
50
60
46
52
56
62
70
80
Note:
• All grilles
shown are
optional
Grille
Options
Old
English
Standard
Colonial
Prairie
Cathedral
Note: Radius Units – All dimensions are engineered calculations. Variations in Unit Width should not exceed 1/8” of engineered specifications. Brickmould widths may vary up to 1/4” of engineered calculations. All height specifications may vary as much
as 3/8” to the engineered dimensions. These are considered normal variations for arched head products.
CLAD
DOUBLE
HUNG
PATIO
W
INDOWS
D
OORS
Clad & Wood Bay Windows
16
30° B AY W INDOWS
1-8
4-0 Ctr
N/A
7’103/8”
7’7”
7’41/4”
1’15/16”
CLAD/WOOD
WIDTH
Clad Out. BM
Wood Out. BM
Rough Opening
Outside Frame
Projection
16”|45½”|16”
Glass
1-8
5-0 Ctr
N/A
8’103/8”
8’7”
8’41/4”
1’15/16”
1-8
6-0 Ctr
N/A
9’83/8”
9’7”
9’41/4”
1’15/16”
2-0
4-0 Ctr
N/A
8’55/16”
8’115/16”
7’113/16”
1’35/16”
2-0
5-0 Ctr
2-0
6-0 Ctr
N/A
9’45/16”
9’115/16”
8’113/16”
1’35/16”
16”|57½”|16”
16”|69½”|16”
20”|45½”|20”
1-8
5-0 Ctr
N/A
8’59/16”
8’17/16”
7’97/16”
1’63/4”
1-8
6-0 Ctr
N/A
9’59/16”
9’17/16”
8’97/16”
1’63/4”
16”|69½”|16”
N/A
10’55/16”
10’115/16”
9’113/16”
1’35/16”
2-4
4-0 Ctr
N/A
9’01/4”
8’87/8”
8’61/8”
1’55/16”
2-4
5-0 Ctr
N/A
10’01/4”
9’87/8”
9’61/8”
1’55/16”
2-4
6-0 Ctr
N/A
11’01/4”
10’87/8”
10’61/8”
1’55/16”
20”|57½”|20”
20”|69½”|20”
24”|45½”|24”
24”|57½”|24”
24”|69½”|24”
2-0
4-0 Ctr
N/A
7’111/4”
7’71/8”
7’31/8”
1’99/16”
2-0
5-0 Ctr
2-0
6-0 Ctr
N/A
8’111/4”
8’71/8”
8’31/8”
1’99/16”
N/A
9’111/4”
9’71/8”
9’31/8”
1’99/16”
2-4
4-0 Ctr
N/A
8’47/8”
8’03/4”
7’83/4”
2’07/16”
2-4
5-0 Ctr
N/A
9’47/8”
9’03/4”
8’83/4”
2’07/16”
2-4
6-0 Ctr
N/A
10’47/8”
10’03/4”
9’83/4”
2’07/16”
20”|45½”|20”
20”|57½”|20”
20”|69½”|20”
24”|45½”|24”
24”|57½”|24”
24”|69½”|24”
45° B AY W INDOWS
1-8
4-0 Ctr
N/A
7’59/16”
7’17/16”
6’97/16”
1’63/4”
CLAD/WOOD
WIDTH
Clad Out. BM
Wood Out. BM
Rough Opening
Outside Frame
Projection
16”|45½”|16” 16”|57½”|16”
Glass
30° & 45° B AY W INDOWS
CLAD/WOOD
HEIGHT
4-6
Clad Out. BM
Wood Out. BM
Rough Opening
Outside Frame
Glass
5-2
6-2
N/A
N/A
N/A
4’103/16”
6’63/16”
5’63/16”
4’107/8”
5’67/8”
6’67/8”
4’103/8”
5’63/8”
6’63/8”
See page 6-8 for Venting & Picture
Window Glass Heights
Note:
For other unit heights:
Bay R.O. = Double Hung Vent
R.O. Height + 11/2”
Projection – Face
of sheathing
to face of window
4-0 Center Sash
Standard Colonial
Prairie
Grille
Options
Projection – Face
of sheathing
to face of window
5-0 Center Sash
6-0 Center Sash
Note:
• Bay windows must be
supported for proper
operation of operable units
DC
OUBLE
UNG
LAD PH
ATIO
W
INDOWS
D
OORS
Clad & Wood Circle Top & Arch Top Single Hung Units
17
C IRCLE T OP C LAD S INGLE H UNG & W OOD D OUBLE H UNG U NITS *
CLAD/WOOD
WIDTH
2-0
CLAD/WOOD
HEIGHT
3-0
2-8
2-4
2’4”
3’4”
3’0”
Outside BM
2’8”
Rough Opening 2’115/16” 2’515/16” 2’915/16” 3’115/16”
Outside Frame 2’17/16” 2’57/16” 2’97/16” 3’17/16”
20310 24310 2046
Clad Top Sash Width
201/2” 241/2”
20” 24”
20” 24”
245/8” 255/8”
247/8” 257/8”
157/16” 147/16”
Bottom Sash Width**
Clad Top Sash Height
Wood Top Sash Height
Bottom Sash Height***
GLASS CONT.
Clad Top Sash Width
Wood Top Sash Width
Bottom Sash Width**
Clad Top Sash Height
Wood Top Sash Height
Bottom Sash Height***
4-6
5-2
5-6
6-2
Sample Matrix
24
28
20
Outside BM
4’23/16” 4’103/16” 5’63/16” 5’103/16” 6’63/16”
Rough Opening 4’13/8” 4’93/8” 5’53/8” 5’93/8” 6’53/8”
Outside Frame 4’07/8” 4’87/8” 5’47/8” 5’87/8” 6’47/8”
30
310
46
GLASS
Wood Top Sash Width
3-10
2056
2456
201/2”
20”
20”
345/8”
347/8”
257/16”
2446
2846
3046
2052
2452
2852
3052
201/2”
20”
20”
285/8”
287/8”
197/16”
241/2”
24”
24”
295/8”
297/8”
187/16”
281/2”
28”
28”
305/8”
307/8”
177/16”
321/2”
32”
32”
315/8”
317/8”
167/16”
201/2”
20”
20”
325/8”
327/8”
237/16”
241/2”
24”
24”
335/8”
337/8”
227/16”
281/2”
28”
28”
345/8”
347/8”
217/16”
321/2”
32”
32”
355/8”
357/8”
207/16”
2856
3056
2062
2462
2862
3062
321/2”
32”
32”
375/8”
377/8”
227/16”
201/2”
20”
20”
385/8”
387/8”
297/16”
241/2”
24”
24”
395/8”
397/8”
287/16”
281/2”
28”
28”
405/8”
407/8”
277/16”
321/2”
32”
32”
415/8”
417/8”
267/16”
241/2” 281/2”
24” 28”
24” 28”
355/8” 365/8”
357/8” 367/8”
247/16” 237/16”
Note:
• Units must be shimmed
for proper operation.
52
= Egress Size Units –
Check Local Codes
for exact requirements
56
62
**Bottom sash widths are the same for clad and wood.
***Bottom sash heights are the same for clad and wood.
A RCH T OP C LAD S INGLE H UNG & W OOD D OUBLE H UNG U NITS
CLAD/WOOD
WIDTH
2-0
2-8
2-4
3-0
CLAD/WOOD
HEIGHT
3-2
3-10
4-6
5-6
5-2
6-2
2’4”
3’0”
3’4”
Outside BM
2’8”
3’2”
2’6” 2’10”
Outside Frame 2’17/16” 2’57/16” 2’97/16” 3’17/16”
3’63/16” 4’23/16” 4’103/16” 5’63/16” 5’103/16” 6’63/16”
Outside BM
Rough Opening 3’53/8” 4’13/8” 4’93/8” 5’53/8” 5’93/8” 6’53/8”
Outside Frame 3’47/8” 4’07/8” 4’87/8” 5’47/8” 5’87/8” 6’47/8”
GLASS WIDTH
GLASS HEIGHT
2-0
Clad Top Sash 201/2”
Wood Top Sash 20”
Bottom Sash
20”
2-4
2-8
3-0
24 /2”
24”
24”
28 /2”
28”
28”
32 /2”
32”
32”
1
1
1
3-2
Clad Top Sash
16”
Wood Top Sash 167/8”
Bottom Sash
16”
2-0
Outside Head Radius 167/8”
R.O. Radius
173/8”
Outside BM Radius 181/8”
2-4
2-8
3-0
223/8”
227/8”
235/8”
287/8”
293/8”
301/8”
363/8”
367/8”
375/8”
Sample Matrix
24
28
30
32
310
3-10
4-6
5-2
5-6
6-2
46
20”
207/8”
20”
24”
247/8”
24”
28”
287/8”
28”
30”
307/8”
30”
34”
347/8”
34”
52
A RCH T OP D OUBLE H UNG R ADII
CLAD/WOOD
(BY UNIT WIDTH)
20
56
Note:
• Units must be shimmed for proper operation.
62
= Egress Size Units – Check Local Codes for
exact requirements
*Outside Head Radii and Rough Opening Radii are the same for
clad and wood.
Grille
Options
Note:
• All grilles shown are optional
• *Small radius “GBG” Hubs must be
manufactured with 5/8” “GBG” stock –
even though remaining bars may be 7/8”
Standard Colonial
Prairie
Cathedral
Standard Colonial
Prairie
Cathedral
Are your current single glazed
windows old, drafty and causing
your heating and cooling bills to
’s “Clip
be excessive? Monarch
Monarch’s
“Clip-Pak
ak”” Sash and Balance
Replacement System is just what
you need to solve that problem.
“Clip-Pak” is the simple, costeffective way to bring your home
and windows into the 21st century
by installing Monarch’s Insulated
Glass with Wood, Clad or Mcell
Sash and Tilt Balances. Monarch’s
“Clip-Pak” sash are available in
standard Double Hung sizes
or can be made into custom sizes
to meet any requirements that your
replacement project may require.
(Minimum sash opening size
available is 1’4” x 2’6”, and
maximum size is 3’4” x 7’6”.)
Wood R
eplacement Sash
Replacement
are primed, treated and
weatherstripped. Wood sash are
ready for you to apply an oil-based
alkyd primer and two coats of
100% Acrylic Latex (exterior grade)
semigloss house and trim enamel.
Monarch’s “Clip-Pak”
Clad Replacement Sash have a .024
roll-formed aluminum sash clad on
the exterior, available in White,
Cream, Sand, Bronze or Green. This
low maintenance feature eliminates
exterior painting of the sash. The
interiors of both wood and clad
“Clip-Pak” Replacement Sash are of
clear pine and can be stained or
painted to match existing decor.
Monarch
’s Mcell is a highly
Monarch’s
engineered, high endurance material
that never rots, warps, cracks, sticks
or swells. Block and tackle balances.
Interior primed wood trim on perimeter
of frame. Glazing options of Clear,
Low-E, Bronze, Gray and Obscure
offer added energy efficiency to meet
today’s energy standards. Add to
these glazing options a selection
from our complete line of grilles
which include 3/4” and 1-1/8”
wood, KD and Full Surround Grilles
(not available on Mcell), PDL”
(Permanent Divided Lite), and “SDL”
(Simulated Divided Lite) and 5/8”
and 7/8” “GBG” (Grilles Between
the Glass). Monarch’s Tilt Replacement Balances
Balances, when installed,
offer easy window cleaning of the
exterior glass from the inside. “ClipPak” Balances are available in White
or Beige (please specify the color
when ordering). Locks are available
in either White (standard with White
balances) or Oil Rubbed Bronze
(standard with Beige balances)
(Please specify the color when
ordering.) Locks are factory installed
for your convenience. “Clip-Pak”
Sash and Balance Systems come
complete with all parts required and
instructions for easy installation.
When you want the very best, specify
Monarch Windows and Doors.
Clip-Pak Balances are available in white and beige. Special sizing are special order - 3-4 weeks.
Please specify color when ordering.
Note: Minimum sash opening size available is 1-4 x 2-6 and maximum size is 3-4 x 7-6, or a 3-8 x 6-2
Note: Standard screens may not fit with clip pak replacements
Width
Measurements from Inside
Height
Measurements from Inside
To Measure:
Center
Center
Right Side
Top
Left Side
18
Height
CLIP PAK
“Clip-Pak” Replacement Sash & Balance System
Bottom
Width
• Remove inside stops and measure the inside frame width opening at the top, center and bottom as shown above.
If the dimensions are different, use the smallest dimension as your width dimension (see width diagram above left).
Height
• Measure from inside of the head jamb to approximately the center of the sloped sill where the bottom sash touches the
sill on the exterior (see diagram above center) measure vertically at each side and in the center as shown in the height
diagram (above right). If dimensions are different, use the smallest dimension as your height dimension.
Ordering Chart
• Place the width and height dimensions for each opening on the ordering chart on the back page of this brochure.
Also, select the sash type, wood or clad, glass type, sash lock and grille type for your job.
• To place your order for Monarch Clip-Pak Replacement Sash and Balances, take the information you have collected
and place on the ordering chart and give to your Monarch Window Dealer.
19
W
hen ordering your Monarch Clip-Pak Replacement Sash, select one option from each group listed below
and place that information on the ordering chart along with the quantity, width and height dimensions for
each size required. With the versatility of the Monarch Clip-Pak System, glass and grille options can differ
from window to window depending on your particular requirements.
Clip-Pak Sash Options
Sash Type:
A) Wood
B) Clad
C) Mcell
Grille Pattern:
A) Colonial
B) Prairie
Clad Sash Color:
A) White
B) Sand
C) Cream
D) Green
E) Bronze
Glass Tint:
Glass Temp:
A) Clear I\G
A) Annealed
B) Low-E I/G
B) Tempered
C) Bronze I\G
D) Gray I\G
E) Obscure I\G
F) Low-E \ Bronze I/G
G) Low-E \ Gray I/G
Balance Color:
A) White
B) Beige
C) White - Mcell
Sash Lock Color:
A) Oil Rubbed Bronze
B) White
C) White - Mcell
Grille Type:
A) 3/4” KD (Knocked Down) - NA Mcell
B) 11/8” KD (Knocked Down) - NA Mcell
C) 3/4” Full Surround - NA Mcell
D) 11/8” Full Surround - NA Mcell
E) 5/8” “GBG” (Grille Between the Glass)
F) 7/8” “GBG” (Grille Between the Glass)
G) 3/4” “PDL” (Permanent Divided Lite)
H) 11/8” “PDL” (Permanent Divided Lite)
I) 3/4” “SDL” (Simulated Divided Lite)
J) 11/8” “SDL” (Simulated Divided Lite)
K) None
Grille Color:
For “GBG”, “PDL” and “SDL” Only
A) Primed - “PDL” & “SDL” Wood Sash Only
B) White
“GBG”, “PDL” & “SDL” Clad Sash Only
C) Sand
& “GBG” Wood Sash
D) Cream
E) Green
White only on Mcell Sash
F) Bronze
G) Bronze Exterior / White Interior
GBG Only
H) Sand Exterior / White Interior
Ordering Chart
Fill in each blank below with the proper letter that denotes your selection for that item.
Qty
Inside
Frame
Width
Inside
Frame
Height
Sash
Type
Clad
Sash
Color
Glass
Tint
Glass
Temp
Sash
Lock
Color
Balance
Color
Grille
Type
Grille
Pattern
Grille
Color
C LIP P AK
Options and Ordering Chart
CLAD PATIO
DOORS
“Clip-Pak” Replacement Sash & Balance System
CASEMENT/AWNING
WINDOWS
Casement & Awning Features
Clad & Wood Details
20
Leaf Weatherstripping on top,
left and right sides of Sash.
Sash clad of extra thick .024
Roll Formed Aluminum.
Graceful Interior Sash
Profile accepts Monarch’s
unique Full Surround
Compression Grilles.
Standard 3/4" Clear Monarch High
Test Insulated Glass. Other glazing
options: Low-E , Bronze, Gray and
Obscure. All available in Tempered.
Standard Clear
Pine Interiors.
Classic Mortise and
Tenon Corner Joint with
Butyl Water Tight Seal.
Solid Butyl Glazing Sealant for
permanent life and maximum
weatherability.
Structural 45 Degree Mitered Corner on Clad Unit Frame and
reinforced with a Lexan Corner Key with Stainless Steel Screws.
Standard Jamb extended
to 4 9/16" (wider Extension
Jambs available and
factory applied).
Frame clad of .050 Extruded Aluminum with Low
Maintenance Electrostatic Applied Polyester Enamel
available in White, Cream, Sand, Bronze or Green.
Leaf Weatherstripping on top,
left and right sides of Sash.
Bulb Weatherstripping
around perimeter of Frame.
Stout 2" wide by 11/2" thick Sash.
Standard Wood Brickmould.
Optional PVC Brickmould
and other Exterior Trims
also available.
Graceful Interior Sash Profile
accepts Monarch’s unique Full
Surround Compression Grille.
permanent life and
Standard 3/4" Clear Monarch High Test
Insulated Glass. Other glazing options:
Low-E , Bronze, Gray and Obscure. All
available in Tempered.
Treated and primed
Exterior Wood Frame.
Standard Jamb extended to 4 9/16"
(wider Extension Jambs available and
factory applied).
Classic 2” wide by 11/2” thick Sash
with Mortise and Tenon Corner Joints.
Bulb Weatherstripping
around perimeter of Frame.
Standard Wood
Subsill. Optional PVC
Subsill also available.
CASEMENT HANDING
Left
Hand
Right
Hand
AWNING HANDING
Ventilating sash may be hinged on either side.
Casement handing is accomplished by viewing
the window from the outside of the building. The
casement’s hand is determined by the side on
which the hinges are mounted.
True Awning
CLAD NAIL FIN
during shipping. Nail fins then lock
into place for easy installation.
EXTERIOR TRIM
ood TTrim
rim is offered in various profile
Wood
Exterior W
options – WM180 Brickmould which is standard or
optional 5/4x4, 1x4 and 1x6 – which can be used
with or without wood Backband trim. PVC (no rot)
Brickmould, along with 5/4x4, 1x4, 1x6 and 1x4w/BB
trim, is also available.
Wood 1x4
Wood WM180
Brickmould
(11/8" x 2")
SCREENS
Screens are optional on all vent window units. They
consist of a heavy, white aluminum frame
(3/4” x 7/16” .024 roll-formed)
with charcoal fiberglass mesh.
Spring loaded plungers
at the top make removal
easy. Half screens are
available for radius
vent units. Specify
screen and color
desired at the time of order. Wood
units come standard with White screens. On clad
units
units, the color is matched to the exterior cladding
finish.
Wood
Backband
1
( /2" x 1")
21
CASEMENT
/A
WNING
CLAD P
ATIO
W
INDOWS
D
OORS
Casements & Awning Window Options
Trim
Accessories
13/16”
17/8”
4”
Frame Expanders
Use for filling the space
between the new window
and the existing wall to give
you a totally clad exterior
Wood 5/4x4
PVC 1x4BB
(9/16" x 41/2" 13/16" on BB)
Wood 1x6
13/4”
Exterior Clad Brickmould is an
addition that gives clad units the
wide profile that is common on
most wood windows and
doors, adding 2-9/16” to the
outside frame width and 1-29/32” to the outside
frame height of a Casement or awning unit. This
feature is available in all clad colors and on all clad
units, (excluding oval units and bay units).
Nail Fin
Optional Clad
Brickmould
Radius French Casement
French Casement
JAMBS
Wood jambs are water-repellent and insect toxic
treated. The standard basic unit jamb width is
3-9/16”. Pine extension jambs are available for wall
thicknesses from 3-9/16” to 12”. Clad basic jamb is
2-13/16”.
SASH
Classic 2” wide by 1-1/2” thick with mortise and
tenon corner joints. Sash are clear pine interior
ready for staining or painting.
Jamb
Expansion Mullion
Use for a wide mullion or
stud pocket by inserting a
frame expander into each
side. Will cover an area
from 21/4” in width up to 8”
Standard
Mullion Cover
Use in combination with
corrugated staples at the
interior to connect clad
windows and doors together
Standard
Clad Exterior
Head Drip Fin
Use at the head of each
clad window or door for
additional protection
against water leakage
CASEMENT HANDING
Left
Hand
Right
Hand
AWNING HANDING
Ventilating sash may be hinged on either side.
Casement handing is accomplished by viewing
the window from the outside of the building. The
casement’s hand is determined by the side on
which the hinges are mounted.
True Awning
Horizontal Drip Mullion
Use in combination with
corrugated staples at the
interior to connect Clad
Circle Top or Transoms to
Clad Outswing Doors
CASEMENT/AWNING
WINDOWS
Casement & Awning Window Options
22
G RILLES
Wood Full
Surround
7
3
/16"
/4"
3
FINISH
Wood exteriors are water-repellent, insect toxic
treated and primed. Clad exteriors encase the wood
exterior frame in .050 extruded aluminum clad and
the wood exterior sash in roll-formed .024 aluminum
clad, all with an applied low maintenance electrostatic polyester enamel to resist scratches and make
cosmetic upkeep easier than ever imagined. Clad
finish is available in White, Cream, Sand, Bronze
or Green.
G R I L L E S (See right for details)
Grilles are available and optional on all window
units. Monarch offers 3/4” or 1-1/8” Wood “KD”
or Full Surround Grilles in addition to “PDL”
(Permanent Divided Lite), “SDL” (Simulated Divided
Lite) available 3/4”, 1 1/8” and 2”, and 5/8” or
7/8” “GBG” (Grilles Between the
Full
Surround
Glass) grille configurations. Our
“PDL” system is the smart
alternative to the old True
Divided Lite system – the initial
cost is less, and better energy
performance guarantees years
KD Grille
/4"
Wide Profile
7
White
/16"
1 /8"
1
Wood Grilles
available in
bar widths
3
GBG
Glass
Cream
Sand
Bronze
Green
KD Grille pushpins – for secure
installation
into
window
unit.
Printing limitations make accurate color duplication impossible. For exact color matching, please
refer to actual color samples at your Monarch dealer.
Glass
Aluminum
Grille Bar
Grilles-Betweenthe-Glass
available in
/8" and 7/8" grille bar
widths
5
The unique profile of Monarch’s
snuggly into window sash with
can be easily removed for cleaning
cleaning..
HARDWARE
Monarch’s Casement and Awning Window units
come standard with high
quality cam locks –
Oil Rubbed Bronze is
standard with White as
an option. The standard hardware is a folding
/ nesting handle available in Oil Rubbed
Bronze or White. In the same tradition of
quality, Monarch’s Dual-Arm
Operator creates smooth,
balanced movement with
a gentle turn
of the
handle. Specify
hardware and color
desired at the time of order.
of lower energy bills. Exterior grille bars will match
the window finish as specified. Interior bars are of
Clear Ponderosa Pine. Exterior bars are primed
aluminum for wood units or have a White, Cream,
five finish colors. Monarch is expanding our GBG
option by offering a two-tone GBG (Bronze
Exterior/White Interior, Sand Exterior/White Interior). available in 5/8” and 7/8”. Design options
are limitless with numerous standard lite layout
options as well as the availablity of optional custom
lite layouts.
PDL
Glass
SDL
Glass
Glass
/ 4"
Glass
Glass
1
Attached
Wood
Interior
Grille
Attached
Aluminum
Exterior
Grille
Aluminum
Grille Bar
Permanent
Divided Lite
Triple Grid System
available in
bar widths
G L A Z I N G (See below for details)
Monarch windows are standard with high test 3/4"
Clear, insulated glass assembled with solid butyl
glazing sealant for permanent life and maximum
weatherability. Glazing options include Clear,
Bronze, Gray, Obscure or Low E. All glass available in annealed and tempered glass.
Attached
Wood
Interior
Grille
Glass
/ 4"
1
/ 4"
1
Attached
Aluminum
Exterior
Grille
Attached
Wood
Interior
Grille
Attached
Aluminum
Exterior
Grille
Simulated
Divided Lite
Twin Grid System
available in
3
Outside
Surface
Note:
• Tempered glass
appears clear
Glass
Options
Glass
Inside
1 2
3 4
Clear
Bronze
Obscure
Gray
Low-E
Measuring Specifications
23
Custom Radius Units,
Clad or Primed Wood
Create magnificent window scapes with Monarch’s Custom Shapes.
Radius units can be fabricated in both low-maintenance clad
extrusion or in composite and can be mulled to standard
Monarch windows and doors. The Monarch Clad Spandrel
Frame System offers complete window flexibility. Non-radius
custom window shapes are fabricated from lineal components
of low-maintenance aluminum extrusion attached to a preservativetreated wood base. Glazing options include Monarch’s entire
glazing line – Clear, Low-E, Bronze, Gray and Obscure. Custom
windows can be mulled horizontally or vertically to any other
Monarch clad window or door product.
Custom Non-Radius Units,
Monarch Spandrel Frame
CUSTOM RADIUS UNIT MEASURING GUIDE**
Circle TTo
op
P. W
W..
Segment
P. W
W..
LH
TTrap
rap
RH
LH
TTrap
rap
TTriangle
riangle
RH
Octagons
Ovals
CUSTOM NON-RADIUS UNIT MEASURING GUIDE**
Elliptical
P. W
W..
SPANDREL
Special Millwork – Custom Radius & Non-Radius Units
TTriangle
riangle
Rounds
LH
Extended
Segment
RH
Extended
Segment
LH
Extended
Extended RH
Qtr
Qtr
Qtr.. Circle
Qtr.. Circle
Half
LH
Segment
Full
Circle
R H
Segment
LH
Qtr
Qtr.. Circle
LH
Pyramid
Chop
RH
TTrap
rap
Chop
Pentoid
R H
Q t r.
Circle
Pentagon
Pentoid
Elliptical
Extended
Octagon
Hexagon
Octagon
Segment
Rectangle
Head
Vertical
(Clad)
(Wood)
Outside of
Brickmould
Rough
Opening
Vertical
Outside
of Frame
Rough
Opening
Eyebrow
**“W” and “H” dimensions shown are
required measurements when ordering.
• Always give width dimension first.
• Always view from the outside.
Chop
Tr a p
Circle
Oval
Note: Special Millwork
Note:
Octagons, Ovals and
Rounds are available in
some limited standard
sizes. Contact your
Monarch Dealer for more
detailed standard sizing
information.
Grille
Options
Octagon
Standard
Grille
Round
Standard
Grille
* Round
Optional
Grille
* Oval
Wood
Grille
* Oval
Wood
Grille
* Oval
Wood
Grille
Note: Radius Units – All dimensions are engineered calculations. Variations in Unit Width should not exceed 1/8” of engineered specifications. Brickmould widths may vary up to 1/4” of engineered calculations. All height specifications may vary as much as 3/8”
to the engineered dimensions. These are considered normal variations for arched head products.
* Available in 3/4” and
11/8” wood and 3/4”
SDL grilles only. Center
Hub on SDL grilles in
oval windows must be
a circle rather than an
oval.
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
4’51/8”
4’27/8”
4’23/8”
12”
4’415/16”
4’27/8”
4’23/8”
12”
5’915/16”
5’711/16”
5’73/16”
12”
5’93/4”
5’711/16”
5’73/16”
12”
7’23/4”
7’01/2”
7’0”
12”
7’29/16”
7’01/2”
7’0”
12”
1228-1
1228-2
1228-3
1228-4
1228-5
1234-1
1234-2
1234-3
1234-4
1234-5
1242-1
1242-2
1242-3
1242-4
1242-5
1248-1
1248-2
1248-3
1248-4
1248-5
1254-1
1254-2
1254-3
1254-4
1254-5
1260-1
1260-2
1260-3
1260-4
1260-5
1266-1
1266-2
1266-3
1266-4
1266-5
1272-1
1272-2
1272-3
1272-4
1272-5
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
Twin
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
Triple
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
Five Wide
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
Quad
W OOD
CLAD
Note: All wood outside brickmould dimensions is with a wood subsill - for
PVC subsill add 1/8”.
Grille
Options
Standard Colonial
Prairie
Note:
• All grilles shown
are optional
Check Local Codes for
exact requirements
W OOD
3’05/16”
2’101/16”
2’99/16”
12”
3’01/8”
2’101/16”
2’99/16”
12”
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
Single
1’71/2”
1’51/4”
1’43/4”
12”
1’75/16”
1’51/4”
1’43/4”
12”
CLAD
O
ut
si
d
R
ou e
O
gh Bri
ut
O ckm
si
pe
d
ni oul
G eF
O
d
n
l
r
R
ou uts ass am g
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
ss me
24
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
CASEMENT
WINDOWS
Clad & Wood Vent & Fixed Casement Windows
1628-1
1628-2
1628-3
7’115/16”
6’1111/16”
6’113/16”
16”
7’13/4”
6’1111/16”
6’113/16”
16”
8’103/4”
8’81/2”
8’8”
16”
8’109/16”
8’81/2”
8’8”
16”
1628-4
1628-5
W OOD
5’51/8”
5’27/8”
5’23/8”
16”
5’415/16”
5’27/8”
5’23/8”
16”
CLAD
3’85/16”
3’61/16”
3’59/16”
16”
3’81/8”
3’61/16”
3’59/16”
16”
Casement
Handing
Left
Hand
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
O
ut
si
de
R
o
O ugh Bri
ut
O ckm
si
pe
d
n ou
G eF
la
ra ing ld
R Ou
ss
ou ts
m
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
m
ss
e
25
1’111/2”
1’91/4”
1’83/4”
16”
1’115/16”
1’91/4”
1’83/4”
16”
1634-2
1634-3
1634-4
1634-5
1642-1
1642-2
1642-3
1642-4
1642-5
Right
Hand
Ventilating sash may be
hinged on either side.
Casement handing is
accomplished by viewing
the window from the
outside of the building.
The casement’s hand is
determined by the side
on which the hinges
are mounted.
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
1634-1
CASEMENT
WINDOWS
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
Mull Details
1648-1
1648-2
1648-3
1648-4
1648-5
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
(Clad)
1654-1
1654-2
1654-3
1654-4
1654-5
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
(Wood)
1660-2
1660-3
1660-4
1660-5
1666-1
1666-2
1666-3
1666-4
1666-5
1672-2
1672-3
1672-4
1672-5
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
1660-1
1672-1
W OOD
CLAD
exact requirements
Note:
are optional
Grille
Options
Standard Colonial
Prairie
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
4’45/16”
4’21/16”
4’19/16”
20”
4’41/8”
4’21/16”
4’19/16”
20”
6’51/8”
6’27/8”
6’23/8”
20”
6’415/16”
6’27/8”
6’23/8”
20”
8’515/16”
8’311/16”
8’33/16”
20”
8’53/4”
8’311/16”
8’33/16”
20”
10’63/4”
10’41/2”
10’4”
20”
10’69/16”
10’41/2”
10’4”
20”
2028-1
2028-2
2028-3
2028-4
2028-5
2034-1
2034-2
2034-3
2034-4
2034-5
2042-1
2042-2
2042-3
2042-4
2042-5
2048-1
2048-2
2048-3
2048-4
2048-5
2054-1
2054-2
2054-3
2054-4
2054-5
2060-1
2060-2
2060-3
2060-4
2060-5
2066-1
2066-2
2066-3
2066-4
2066-5
2072-1
2072-2
2072-3
2072-4
2072-5
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
Single
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
Twin
Quad
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
Five Wide
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
Triple
W OOD
CLAD
Grille
Options
Standard Colonial
Prairie
Note:
are optional
exact requirements
W OOD
2’31/2”
2’11/4”
2’03/4”
20”
2’35/16”
2’11/4”
2’03/4”
20”
CLAD
O
ut
si
d
R
ou e
O
gh Bri
ut
O ckm
si
pe
d
ni oul
G eF
O
d
n
l
r
R
ou uts ass am g
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
ss me
26
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
CASEMENT
WINDOWS
2428-2
O
ut
si
de
R
o
O ugh Bri
ut
O ckm
si
pe
d
ni oul
G eF
O
d
n
l
r
R
ou uts ass am g
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
ss me
7’5 /8”
7’27/8”
7’23/8”
24”
7’415/16”
7’27/8”
7’23/8”
24”
9’9 /16”
9’711/16”
9’73/16”
24”
9’93/4”
9’711/16”
9’73/16”
24”
2428-3
2428-4
15
12’3 /4”
12’01/2”
12’0”
24”
12’2 9/16”
12’01/2”
12’0”
24”
3
Casement
Handing
2428-5
Left
Hand
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
2428-1
5’0 /16”
4’101/16”
4’99/16”
24”
5’01/8”
4’101/16”
4’99/16”
24”
1
CLAD
2’7 /2”
2’51/4”
2’43/4”
24”
2’75/16”
2’51/4”
2’43/4”
24”
5
W OOD
27
1
CLAD
ASEMENT
C
PATIO
W
INDOWS
D
OORS
2434-2
2434-3
2434-4
2434-5
2442-1
2442-2
2442-3
2442-4
2442-5
Casement handing is
the window from the
on which the hinges
are mounted.
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
2434-1
Right
Hand
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
Mull Details
2448-1
2448-2
2448-3
2448-4
2448-5
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
(Clad)
2454-1
2454-2
2454-3
2454-4
2454-5
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
(Wood)
2460-2
2460-3
2460-4
2460-5
2466-1
2466-2
2466-3
2466-4
2466-5
2472-1
2472-2
2472-3
2472-4
2472-5
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
2460-1
W OOD
CLAD
exact requirements
Note:
are optional
Grille
Options
Standard Colonial
Prairie
8’51/8”
8’27/8”
8’23/8”
28”
8’47/8”
8’27/8”
8’23/8”
28”
11’115/16”
10’1111/16”
10’113/16”
28”
11’25/8”
10’1111/16”
10’113/16”
28”
13’103/4”
13’81/2”
13’8”
28”
13’103/8”
13’81/2”
13’8”
28”
2828-1
2828-2
2828-3
2828-4
2828-5
2834-1
2834-2
2834-3
2834-4
2834-5
2842-1
2842-2
2842-3
2842-4
2842-5
2848-1
2848-2
2848-3
2848-4
2848-5
2854-1
2854-2
2854-3
2854-4
2854-5
2860-1
2860-2
2860-3
2860-4
2860-5
2866-1
2866-2
2866-3
2866-4
2866-5
2872-1
2872-2
2872-3
2872-4
2872-5
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
Single
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
Twin
Quad
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
Five Wide
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
Triple
W OOD
CLAD
Grille
Options
Standard Colonial
Prairie
Note:
are optional
exact requirements
W OOD
5’85/16”
5’61/16”
5’59/16”
28”
5’81/8”
5’61/16”
5’59/16”
28”
CLAD
2’111/2”
2’91/4”
2’83/4”
28”
2’113/8”
2’91/4”
2’83/4”
28”
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
O
ut
si
de
R
o
O ugh Bri
ut
O ckm
si
pe
d
n ou
G eF
la
ra ing ld
R Ou
ss
ou ts
m
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
m
ss
e
28
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
CASEMENT
WINDOWS
9’51/8”
9’27/8”
9’23/8”
32”
9’47/8”
9’27/8”
9’23/8”
32”
12’515/16”
12’311/16”
12’33/16”
32”
12’55/8”
12’311/16”
12’33/16”
32”
*3228-2
*3228-3
*3228-4
W OOD
6’45/16”
6’21/16”
6’19/16”
32”
6’41/8”
6’21/16”
6’19/16”
32”
Casement
Handing
CLAD
3’31/2”
3’11/4”
3’03/4”
32”
3’33/8”
3’11/4”
3’03/4”
32”
29
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
O
ut
si
de
R
o
O ugh Bri
ut
O ckm
si
pe
d
ni oul
G eF
O
d
n
l
r
R
ou uts ass am g
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
ss me
C
PATIO
LAD
ASEMENT
C
D
OORS
W
INDOWS
*3228-1
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
Left
Hand
*3234-2
*3234-3
*3234-4
**3242-1
**3242-2
**3242-3
**3242-4
**3248-1
**3248-2
**3248-3
**3248-4
Casement handing is
the window from the
on which the hinges
are mounted.
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
*3234-1
Right
Hand
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
Mull Details
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
(Clad)
**3254-1
**3254-2
**3254-3
**3254-4
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
(Wood)
**3260-2
**3260-3
**3260-4
***3266-1
***3266-2
***3266-3
***3266-4
***3272-1
***3272-2
***3272-3
***3272-4
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
**3260-1
Note:
NO 32” SERIES
UNIT WIDTH WILL
MEET EGRESS.
* = Units will open 90°
but will have permanent
support wedges beneath
sash 2” from lock stile
and in center of sash.
** = Units will have a
hole drilled and a screw
installed 21/2” from the
end of the sash operator
track closest to the
center of the unit. This
will limit the opening to
about 9-10”. These will
also have permanent
support wedges beneath
sash 2” from lock stile
and in the center of
the sash.
*** = 3266 and 3272
units are not available in
venting applications.
W OOD
CLAD
exact requirements
Note:
are optional
Grille
Options
Standard Colonial
Prairie
4’11/2”
3’111/4”
3’103/4”
42”
4’13/8”
3’111/4”
3’103/4”
42”
4’71/2”
4’51/4”
4’43/4”
48”
4’73/8”
4’51/4”
4’43/4”
48”
5’11/2”
4’111/4”
4’103/4”
54”
5’13/8”
4’111/4”
4’103/4”
54”
5’71/2”
5’51/4”
5’43/4”
60”
5’73/8”
5’51/4”
5’43/4”
60”
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
Note: Picture Windows set
up to vent as Awnings:
3428
4228
4828
5428
6028
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
*
3434+
4234
4834
5434
6034
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
4242+
4842
5442
6042
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
3442+
4248+
4848+
5448
6048
3454+
4254+
4854+
5454+
6054
3460+
4260+
4860+
5460+
6060+
3466
4266
4866
5466
6066
3472
4272
4872
5472
6072
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
3448+
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
CLAD
Options
Monarch Awning Picture Windows can be mulled in combination with other picture
windows or combined with vent units as required.
Grille
Options
Standard Colonial
Prairie
Units marked with + are
Awning Picture Windows with
rails running through and stiles
butting to rails.
Units not marked are Casement
Picture Windows with stiles
running through and rails
butting into stiles.
Special Picture Windows
set up to vent as Awnings:
**
W OOD
W OOD
3’51/2”
3’31/4”
3’23/4”
34”
3’53/8”
3’31/4”
3’23/4”
34”
CLAD
O
ut
si
de
R
o
O ugh Bri
ut
O ckm
si
pe
d
ni oul
G eF
O
d
n
l
r
R
ou uts ass am g
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
ss me
30
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
CASEMENT/AWNING
WINDOWS
Clad & Wood Casement & Awning Fixed Picture Units
Note:
are optional
* = Awning Picture windows in
this group will have hardware
group TA-2 which includes a sill
mounted scissor operator with
single jamb locks mounted 6”
off sill on each side. Unit
includes full screen.
** = Awning Picture windows in
this group will have hardware
group TA-3 which includes a sill
mounted scissor operator with
tandem locks mounted on each
jamb. Unit includes full screen.
31
CLAD WIDTH
16”|34”|16”
16”|42”|16”
20”|42”|20”
20”|48”|20”
24”|48”|24”
Outside Brickmould
Rough Opening
Outside Frame
Glass
6’1015/16”
6’87/8”
6’83/8”
16”|34”|16”
7’615/16”
7’47/8”
7’43/8”
16”|42”|16”
8’215/16”
8’07/8”
8’03/8”
20”|42”|20”
8’815/16”
8’67/8”
8’63/8”
20”|48”|20”
9’415/16”
9’27/8”
9’23/8”
24”|48”|24”
16”|34”|16”
16”|42”|16”
20”|42”|20”
20”|48”|20”
24”|48”|24”
WOOD WIDTH
Outside Brickmould
Rough Opening
Outside Frame
Glass
CLAD HEIGHT
1
6’11 /8”
6’87/8”
6’83/8”
16”|34”|16”
34”
7’7 /8”
7’47/8”
7’43/8”
16”|42”|16”
42”
1
48”
1
8’3 /8”
8’07/8”
8’03/8”
20”|42”|20”
54”
60”
1
8’9 /8”
8’67/8”
8’63/8”
20”|48”|20”
9’51/8”
9’27/8”
9’23/8”
24”|48”|24”
Flanker
Combination
66”
Outside Brickmould 3’411/16” 4’011/16” 4’611/16” 5’011/16” 5’611/16” 6’011/16”
Rough Opening
3’31/4” 3’111/4” 4’51/4” 4’111/4” 5’51/4” 5’111/4”
Outside Frame
3’23/4” 3’103/4” 4’43/4” 4’103/4” 5’43/4” 5’103/4”
Glass
34”
42”
48”
54”
60”
66”
WOOD HEIGHT
Outside Brickmould
Rough Opening
Outside Frame
Glass
16-34-16
34”
42”
3’51/4”
3’43/8”
3’37/8”
34”
4’11/4”
4’03/8”
3’117/8”
42”
16-42-16
48”
54”
4’71/4” 5’11/4”
4’63/8” 5’03/8”
4’57/8” 4’117/8”
48”
54”
20-42-20
60”
66”
5’71/4”
5’63/8”
5’57/8”
60”
6’11/4”
6’03/8”
5’117/8”
66”
20-48-20
24-48-24
34
Mull Details
42
(Clad)
48
(Wood)
54
60
66
exact requirements
CASEMENT
/A
WNING
CLAD P
ATIO
W
INDOWS
D
OORS
Clad & Wood Casement & Awning Flanker Combinations
Note:
are optional
Grille
Options
Standard Colonial
Prairie
CASEMENT
/AWNING
CLAD
WP
INDOWS
ATIO
DOORS
Clad & Wood French Casement Units
4’33/4”
4’11/2”
4’1”
20”
4’39/16”
4’11/2”
4’1”
20”
4’113/4”
4’91/2”
4’9”
24”
4’119/16”
4’91/2”
4’9”
24”
1628
2028
2428
1234
1634
2034
2434
1242
1642
2042
2442
1248
1648
2048
2448
1254
1654
2054
2454
1260
1660
2060
2460
1266
1666
2066
2466
1272
1672
2072
2472
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
1228
W OOD
CLAD
Grille
Options
Standard Colonial
Prairie
Note:
are optional
exact requirements
W OOD
3’73/4”
3’51/2”
3’5”
16”
3’79/16”
3’51/2”
3’5”
16”
CLAD
2’113/4”
2’91/2”
2’9”
12”
2’119/16”
2’91/2”
2’9”
12”
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
O
ut
si
R
ou de
B
g
O
ri
ut h
O ck
si
de pe mo
G
Fr nin uld
O
l
R
ou uts ass am g.
e
gh ide
O
B
O
ut
. F pe M
n
r
G
la am ing
ss
e
32
Note: All wood outside brickmould dimensions
is with a wood subsill - for PVC subsill
add 1/8”.
4’33/4”
4’11/2”
4’1”
20”
4’39/16”
4’11/2”
4’1”
20”
4’113/4”
4’91/2”
4’9”
24”
4’119/16”
4’91/2”
4’9”
24”
W OOD
3’73/4”
3’51/2”
3’5”
16”
3’79/16”
3’51/2”
3’5”
16”
CLAD
2’113/4”
2’91/2”
2’9”
12”
2’119/16”
2’91/2”
2’9”
12”
Note: All wood outside brickmould dimensions
is with a wood subsill - for PVC subsill
add 1/8”.
2’111/4”
2’103/8”
2’97/8”
28”
2’1011/16”
2’91/4”
2’83/4”
28”
O
ut
si
R
ou de
B
g
O
ri
ut h
O ck
si
de pe mo
G
Fr nin uld
O
l
R
ou uts ass am g.
e
gh ide
O
B
O
ut
. F pe M
n
r
G
la am ing
ss
e
33
1628
2028
2428
1234
1634
2034
2434
1242
1642
2042
2442
1248
1648
2048
2448
1254
1654
2054
2454
1260
1660
2060
2460
1266
1666
2066
2466
1272
1672
2072
2472
6’71/4”
6’63/8”
6’57/8”
72”
6’611/16”
6’51/4”
6’43/4”
72”
6’11/4”
6’03/8”
5’117/8”
66”
6’011/16”
5’111/4”
5’103/4”
66”
5’71/4”
5’63/8”
5’57/8”
60”
5’611/16”
5’51/4”
5’43/4”
60”
5’11/4”
5’03/8”
4’117/8”
54”
5’011/16”
4’111/4”
4’103/4”
54”
4’71/4”
4’63/8”
4’57/8”
48”
4’611/16”
4’51/4”
4’43/4”
48”
4’11/4”
4’03/8”
3’117/8”
42”
4’011/16”
3’111/4”
3’103/4”
42”
3’51/4”
3’43/8”
3’37/8”
34”
3’411/16”
3’31/4”
3’23/4”
34”
1228
W OOD
CLAD
Note:
are optional
Grille
Options
Standard Colonial
Prairie
Cathedral
CASEMENT
/A
WNING
CLAD P
ATIO
W
INDOWS
D
OORS
Clad & Wood Archtop French Casement Units
CASEMENT
/AWNING
CLAD
WP
INDOWS
ATIO
DOORS
Clad & Wood Awning & Awning/Picture Window Combinations
8’51/8”
8’27/8”
8’23/8”
28”-28”-28”
8’47/8”
8’27/8”
8’23/8”
28”-28”-28”
W OOD
5’85/16”
5’61/16”
5’59/16”
28”-28”
5’81/8”
5’61/16”
5’59/16”
28”-28”
CLAD
2’111/2”
2’91/4”
2’83/4”
28”
2’113/8”
2’91/4”
2’83/4”
28”
G
la
ss
ra
m
e
ni
ng
1’111/4”
O
1’103/8”
ut
si
1’97/8”
d
R
ou e
O
gh Bri
16”
ut
ck
11
s
m
1’10 /16”
id Op
en ou
e
1’91/4” Ro Out Glas Fra ing ld
m
s
ug sid
3
e
1’8 /4” O h e
B
O
ut
16”
. F pe M
34
2816-21
2816-31
2816-12
2816-22
2816-32
2820-11
2820-21
2820-31
2820-12
2820-22
2820-32
2824-11
2824-21
2824-31
2824-12
2824-22
2824-32
Single
Twin
Triple
Single
2 High
Twin
2 High
Triple
2 High
5’0”
4’111/8”
4’105/8”
24”-24”
4’117/16”
4’10”
4’91/2”
24”-24”
2’71/4”
2’63/8”
2’57/8”
24”
2’611/16”
2’51/4”
2’43/4”
24”
4’4”
4’31/8”
4’25/8”
20”-20”
4’37/16”
4’2”
4’11/2”
20”-20”
2’31/4”
2’23/8”
2’17/8”
20”
2’211/16”
2’11/4”
2’03/4”
20”
3’8”
3’71/8”
3’65/8”
16”-16”
3’77/16”
3’6”
3’51/2”
16”-16”
2816-11
W OOD
CLAD
Note: All wood outside brickmould dimensions is
with a wood subsill - for PVC subsill add 1/8”.
Awning Handing
True Awning
Mull Details
(Wood)
(Clad)
Prairie
Prairie
Standard Colonial
Standard Colonial
Grille
Options
Note:
• Grille styles
available in
all units
9’111/8”
9’87/8”
9’83/8”
34”-34”-34”
9’107/8”
9’87/8”
9’83/8”
34”-34”-34”
W OOD
6’85/16”
6’61/16”
6’59/16”
34”-34”
6’81/8”
6’61/16”
6’59/16”
34”-34”
CLAD
3’51/2”
3’31/4”
3’23/4”
34”
3’53/8”
3’31/4”
3’23/4”
34”
G
la
ss
ra
m
e
in
g
1’111/4”
O
1’103/8”
ut
si
1’97/8”
de
R
o
O ugh Bri
16”
ut
O ckm
si
pe
1’1011/16”
d
n ou
G e
1’91/4” Ro Out las Fram ing ld
s
s
u
e
1’83/4” O gh ide
B
O
ut
. F pe M
16”
n
35
3416-21
3416-31
Single
Twin
Triple
Single
2 High
Twin
2 High
Triple
2 High
3’8”
3’71/8”
3’65/8”
16”-16”
3’77/16”
3’6”
3’51/2”
16”-16”
3416-11
3416-22
3416-32
3420-11
3420-21
3420-31
3420-12
3420-22
3420-32
3424-11
3424-21
3424-31
3424-12
3424-22
3424-32
5’0”
4’111/8”
4’105/8”
24”-24”
4’117/16”
4’10”
4’91/2”
24”-24”
2’71/4”
2’63/8”
2’57/8”
24”
2’611/16”
2’51/4”
2’43/4”
24”
4’4”
4’31/8”
4’25/8”
20”-20”
4’37/16”
4’2”
4’11/2”
20”-20”
2’31/4”
2’23/8”
2’17/8”
20”
2’211/16”
2’11/4”
2’03/4”
20”
3416-12
W OOD
CLAD
Note: All wood outside brickmould dimensions is with a
wood subsill - for PVC subsill add 1/8”.
Awning Handing
True Awning
Mull Details
(Clad)
Note:
• Grille styles
available in
all units
Grille
Options
(Wood)
Standard Colonial
Prairie
Standard Colonial
Prairie
CASEMENT
/A
WNING
CLAD P
ATIO
W
INDOWS
D
OORS
CASEMENT
/AWNING
CLAD
WP
INDOWS
ATIO
DOORS
11’111/8”
11’87/8”
11’83/8”
42”-42”-42”
11’107/8”
11’87/8”
11’83/8”
42”-42”-42”
4216-11
4216-21
4216-31
4216-12
4216-22
4216-32
W OOD
8’05/16”
7’101/16”
7’99/16”
42”-42”
8’01/8”
7’101/16”
7’99/16”
42”-42”
CLAD
4’11/2”
3’111/4”
3’103/4”
42”
4’13/8”
3’111/4”
3’103/4”
42”
G
la
ss
ra
m
e
ni
ng
1’111/4”
O
1’103/8”
ut
si
1’97/8”
de
R
o
O ugh Bri
16”
ut
O ck
si
1’1011/16”
de pe mo
u
n
1’91/4” Ro Out Glas Fra ing ld
m
s
e
1’83/4” O ugh ide s
B
O
ut
16”
. F pe M
36
Twin
Triple
Single
2 High
Twin
2 High
Triple
2 High
4220-11
4220-21
4220-31
4220-12
4220-22
4220-32
4224-11
4224-21
4224-31
4224-12
4224-22
4224-32
5’0”
4’111/8”
4’105/8”
24”-24”
4’117/16”
4’10”
4’91/2”
24”-24”
2’71/4”
2’63/8”
2’57/8”
24”
2’611/16”
2’51/4”
2’43/4”
24”
4’4”
4’31/8”
4’25/8”
20”-20”
4’37/16”
4’2”
4’11/2”
20”-20”
2’31/4”
2’23/8”
2’17/8”
20”
2’211/16”
2’11/4”
2’03/4”
20”
3’8”
3’71/8”
3’65/8”
16”-16”
3’77/16”
3’6”
3’51/2”
16”-16”
Single
W OOD
CLAD
Note: All wood outside brickmould dimensions is with a wood
subsill - for PVC subsill add 1/8”.
Awning Handing
True Awning
Mull Details
(Wood)
(Clad)
Note:
• Grille styles
available in
all units
Grille
Options
Standard Colonial
Prairie
Standard Colonial
Prairie
3’51/2”
3’31/4”
3’23/4”
34”
3’53/8”
3’31/4”
3’23/4”
34”
6’85/16”
6’61/16”
6’59/16”
34”-34”
6’81/8”
6’61/16”
6’59/16”
34”-34”
9’111/8”
9’87/8”
9’83/8”
34”-34”-34”
9’107/8”
9’87/8”
9’83/16”
34”-34”-34”
4’11/2”
3’111/4”
3’103/4”
42”
4’13/8”
3’111/4”
3’103/4”
42”
8’05/16”
7’101/16”
7’91/16”
42”-42”
8’01/8”
7’101/16”
7’99/16”
42”-42”
11’111/8”
11’87/8”
11’83/8”
42”-42”-42”
11’107/8”
11’87/8”
11’83/8”
42”-42”-42”
W OOD
8’51/8”
8’27/8”
8’23/8”
28”-28”-28”
8’47/8”
8’27/8”
8’23/8”
28”-28”-28”
CLAD
5’85/16”
5’61/16”
5’59/16”
28”-28”
5’81/8”
5’61/16”
5’59/16”
28”-28”
5’2”
5’11/8”
5’07/8”
16”-34”
5’17/16”
5’0”
4’111/2”
16”-34”
O
ut
si
d
R
ou e
gh Bri
O
O ckm
ut
pe
.
ni oul
G Fra
ng d
la
m
R Ou
ss
ou ts
e
gh ide
O
B
O
ut
pe M
.
ni
G Fra
ng
la
ss me
37
2’111/2”
2’91/4”
2’83/4”
28”
2’113/8”
2’91/4”
2’83/4”
28”
283416-22
283416-32
343416-12
343416-22
343416-32
423416-12
423416-22
423416-32
283420-12
283420-22
283420-32
343420-12
343420-22
343420-32
421320-12
423420-22
423420-32
284216-12
284216-22
284216-32
344216-12
344216-22
344216-32
424216-12
424216-22
424216-32
284220-12
284220-22
284220-32
344220-12
344220-22
344220-32
424220-12
424220-22
424220-32
284816-12
284816-22
284816-32
344816-12
344816-22
344816-32
424816-12
424816-22
424816-32
6’4”
6’31/8”
6’27/8”
16”-48”
6’37/16”
6’2”
6’11/2”
16”-48”
6’2”
6’11/8”
6’07/8”
20”-42”
6’17/16”
6’0”
5’111/2”
20”-42”
5’10”
5’91/8”
5’87/8”
16”-42”
5’97/16”
5’8”
5’71/2”
16”-42”
5’6”
5’51/8”
5’47/8”
20”-34”
5’57/16”
5’4”
5’31/2”
20”-34”
283416-12
W OOD
CLAD
Note: All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add 1/8”.
Single
Twin
Triple
Awning Handing
True Awning
Mull Details
(Clad)
Note:
• Grille styles
available in
all units
Grille
Options
(Wood)
Prairie
Standard Colonial
Prairie
Standard Colonial
CASEMENT
/A
WNING
CLAD P
ATIO
W
INDOWS
D
OORS
CASEMENT/AWNING
WINDOWS
38
Transoms
for casement windows
T RANSOMS
Casement
Transoms
FOR
S INGLE
16”
CLAD WIDTH
Sgl
1’115/16”
Outside Brickmould
1’83/4”
Outside Frame
16”
Glass Width
2x1
#10 Lite Pattern
2x1
#12 Lite Pattern
2x2
#16 Lite Pattern
2x2
#20 Lite Pattern
16”
WOOD WIDTH
Sgl
1’111/2”
Outside Brickmould
Outside Frame
1’83/4”
Glass Width
16”
#10 Lite Pattern
2x1
#12 Lite Pattern
2x1
#16 Lite Pattern
2x2
#20 Lite Pattern
2x2
CLAD HEIGHT
AND
20”
Sgl
2’35/16”
2’11/4”
2’03/4”
20”
2x1
2x1
2x2
2x2
20”
Sgl
2’31/2”
2’11/4”
2’03/4”
20”
2x1
2x1
2x2
2x2
#10
#12
T WIN C ASEMENT U NITS *
24”
28”
Sgl
Sgl
2’75/16” 2’115/16”
2’51/4” 2’91/4”
2’43/4” 2’83/4”
24”
28”
3x1
3x1
3x1
3x1
3x2
3x2
3x2
3x2
24”
28”
Sgl
Sgl
2’71/2” 2’111/2”
2’51/4” 2’91/4”
2’43/4” 2’83/4”
24”
28”
3x1
3x1
3x1
3x1
3x2
3x2
3x2
3x2
#16
32”
Sgl
3’33/8”
3’11/4”
3’03/4”
32”
3x1
3x1
3x2
3x2
32”
Sgl
3’31/2”
3’11/4”
3’03/4”
32”
3x1
3x1
3x2
3x2
5x1 Standard Colonial
for #10 & #12 heights
42”
Sgl
4’15/16”
3’111/4”
3’103/4”
42”
4x1
4x1
4x2
4x2
42”
Sgl
4’11/2”
3’111/4”
3’103/4”
42”
4x1
4x1
4x2
4x2
48”
Sgl
4’75/16”
4’51/4”
4’43/4”
48”
4x1
4x1
4x2
4x2
48”
Sgl
4’71/2”
4’51/4”
4’43/4”
48”
4x1
4x1
4x2
4x2
WOOD HEIGHT
#20
Outside Brickmould
1’17/16” 1’37/16” 1’77/16” 1’117/16”
1’0”
1’2”
1’6”
1’10”
Outside Frame
0’111/2” 1’11/2” 1’51/2” 1’91/2”
Glass Height
83/4”
123/4”
163/4”
63/4”
34”
Sgl
3’55/16”
3’31/4”
3’23/4”
34”
3x1
3x1
3x2
3x2
34”
Sgl
3’51/2”
3’31/4”
3’23/4”
34”
3x1
3x1
3x2
3x2
54”
Sgl
60”
Sgl
5’15/16” 5’75/16”
4’111/4” 5’51/4”
4’103/4” 5’43/4”
54”
60”
5x1
6x1
5x1
6x1
5x2
6x2
5x2
6x2
54”
60”
Sgl
Sgl
20”
Twin
#10
#12
24”
Twin
28”
Twin
3’81/8” 4’41/8” 5’01/8”
5’81/8”
3’61/16” 4’21/16” 4’101/16” 5’61/16”
3’59/16” 4’19/16” 4’99/16” 5’59/16”
3613/16” 4413/16” 5213/16” 6013/16”
4x1
4x1
6x1
6x1
4x1
6x1
6x1
4x1
4x2
4x2
6x2
6x2
4x2
6x2
6x2
4x2
16”
20”
24”
28”
Twin
Twin
Twin
Twin
5’11/2” 5’71/2” 3’85/16”
4’111/4” 5’51/4” 3’61/16”
4’103/4” 5’43/4” 3’59/16”
54”
60” 3613/16”
5x1
6x1
4x1
5x1
6x1
4x1
5x2
6x2
4x2
5x2
6x2
4x2
Outside Brickmould
1’15/8” 1’35/8”
1’2”
1’0”
0’111/2” 1’11/2”
Outside Frame
83/4”
63/4”
Glass Height
16”
Twin
#16
4’45/16” 5’05/16”
4’21/16” 4’101/16”
4’19/16” 4’99/16”
4413/16” 5213/16”
4x1
6x1
4x1
6x1
4x2
6x2
4x2
6x2
5’85/16”
5’61/16”
5’59/16”
6013/16”
6x1
6x1
6x2
6x2
#20
1’75/8” 1’115/8”
1’6”
1’10”
1’51/2” 1’91/2”
123/4” 163/4”
Prairie
for #12 heights only
(not available in
#10 heights)
Prairie
*Note: Transoms for Single & Twin Casements
• For wood unit size or rough opening size height on transoms that stand alone add 11/8” to R.O. and/or unit size height for wood subsill or
1-1/4” for PVC subsill
Monarch Flanker
Combination with a
Segment Head
Picture Window and
two Casement
Transoms.
Monarch Flanker
Combination with
Casement Transom,
Circle Top Transom,
and two Quarter
Circle Transoms.
Combination
Options
39
C IRCLE T OP U NITS **
CLAD WIDTH
16”
1’115/16”
Outside BM
Rough Opening 1’91/4”
1’83/4”
Outside Frame
151/16”
Glass
WOOD WIDTH
20”
24”
2’35/16”
2’11/4”
2’03/4”
191/16”
2’75/16”
2’51/4”
2’43/4”
231/16”
20”
24”
2’3 /2”
2’11/4”
2’03/4”
20”
2’7 /2”
2’51/4”
2’43/4”
24”
16”
1’11 /2”
Outside BM
Rough Opening 1’91/4”
1’83/4”
Outside Frame
16”
Glass
1
1
1
CLAD HEIGHT
Outside BM
Rough Opening
Outside Frame
Glass
WOOD HEIGHT
34”
42”
48”
54”
60”
66”
72”
3’411/16”
3’31/4”
3’23/4”
335/16”
4’011/16”
3’111/4”
3’103/4”
415/16”
4’611/16”
4’51/4”
4’43/4”
475/16”
5’011/16”
4’111/4”
4’103/4”
535/16”
5’611/16”
5’51/4”
5’43/4”
595/16”
6’011/16”
5’111/4”
5’103/4”
655/16”
6’611/16”
6’51/4”
6’43/4”
715/16”
34”
42”
48”
54”
60”
66”
72”
Outside BM
3’51/4” 4’11/4” 4’71/4” 5’11/4” 5’71/4” 6’11/4” 6’71/4”
Rough opening 3’43/8” 4’03/8” 4’63/8” 5’03/8” 5’63/8” 6’03/8” 6’63/8”
Outside Frame 3’23/4” 3’103/4” 4’43/4” 4’103/4” 5’43/4” 5’103/4” 6’43/4”
34”
42”
48”
54”
60”
66”
Glass
72”
Note:
Clad available only as fixed/nonoperable units.
**Small radius GBG” Hubs must be manufactured
with 5/8” “GBG” stock – even though remaining
bars may be 7/8”.
Sample Matrix
16
20
24
34
= Egress Size
Units – Check
Local Codes
for exact
requirements
42
Unit Details
Horizontal
48
(Wood)
Outside of Brickmould
Rough Opening
54
Vertical
Rough Opening
Outside of Brickmould
(Wood)
60
66
72
Note:
• Cathedral Grille shown is 24”
wide; 16” & 20” width units
have only one vertical bar
Grille
Options
Standard Colonial
Prairie
Cathedral
C
ASEMENT
C
PATIO
LAD
W
INDOWS
D
OORS
Clad Fixed & Wood Vent Circle Top Vent Units
CASEMENT
CLAD
WP
INDOWS
ATIO
DOORS
Clad & Wood Segmented Vent & Circle Top Units
40
S EGMENTED V ENT U NITS
16”
Sgl
Outside Brickmould 1’115/16”
1’91/4”
Rough Opening
1’83/4”
Outside Frame
16”
Glass
48”
Radius
13/16”
Radius Rise
16”
WOOD WIDTH
Sgl
Outside Brickmould 1’111/2”
1’91/4”
Rough Opening
1’83/4”
Outside Frame
16”
Glass
48”
Radius
13/16”
Radius Rise
CLAD WIDTH
Single
20”
Sgl
2’35/16”
2’11/4”
2’03/4”
20”
36”
23/16”
20”
Sgl
2’31/2”
2’11/4”
2’03/4”
20”
36”
23/16”
24”
28”
Sgl
Sgl
2’75/16” 2’115/16”
2’51/4” 2’91/4”
2’43/4” 2’83/4”
24”
28”
36”
36”
3”
315/16”
24”
28”
Sgl
Sgl
2’71/2” 2’111/2”
2’51/4” 2’91/4”
2’43/4” 2’83/4”
24”
28”
36”
36”
3”
315/16”
28”
20”
12”
16”
20”
24”
Twin Triple
Twin
Twin
Twin
Twin
3’01/16” 3’81/16” 4’41/16” 5’01/16” 5’81/16” 6’413/16”
2’10”
3’6”
4’2”
4’10”
5’6”
6’23/4”
2’91/2” 3’51/2” 4’11/2” 4’91/2” 5’51/2” 6’21/4”
12”
16”
20”
24”
28”
20”
36”
48”
48”
58”
58”
74”
1
11
7
5
1
4 /8”
4 /16”
6 /8”
7 /8”
10 /8”
10”
28”
20”
12”
16”
20”
24”
Twin Triple
Twin
Twin
Twin
Twin
3’01/4” 3’81/4” 4’41/4” 5’01/4” 5’81/4”
6’5”
6’23/4”
2’10”
3’6”
4’2”
4’10”
5’6”
2’91/2” 3’51/2” 4’11/2” 4’91/2” 5’51/2” 6’21/4”
12”
16”
20”
24”
28”
20”
36”
48”
48”
58”
58”
74”
41/8”
411/16”
67/8”
75/8”
101/8”
10”
24”
Triple
7’413/16”
7’23/4”
7’21/4”
24”
74”
137/8”
24”
Triple
7’5”
7’23/4”
7’21/4”
24”
74”
137/8”
Horizontal
CLAD HEIGHT
54”
60”
66”
(Clad)
72”
Outside Brickmould 3’411/16” 4’011/16” 4’611/16” 5’011/16” 5’611/16” 6’011/16” 6’611/16”
3’31/4” 3’111/4” 4’51/4” 4’111/4” 5’51/4” 5’111/4” 6’51/4”
Rough Opening
3’23/4” 3’103/4” 4’43/4” 4’103/4” 5’43/4” 5’103/4” 6’43/4”
Outside Frame
34”
42”
72”
48”
54”
60”
66”
Glass
WOOD HEIGHT
Outside Brickmould
Rough Opening
Outside Frame
Glass
34”
42”
3’5 /4”
3’43/8”
3’23/4”
34”
4’1 /4”
4’03/8”
3’103/4”
42”
1
1
48”
54”
66”
72”
6’1 /4”
6’03/8”
5’103/4”
66”
6’71/4”
6’63/8”
6’43/4”
72”
60”
4’7 /4” 5’1 /4” 5’7 /4”
4’63/8” 5’03/8” 5’63/8”
4’43/4” 4’103/4” 5’43/4”
48”
54”
60”
1
1
1
1
Outside of Frame
Rough Opening
SHOULDER
HEIGHT*
1234
Single
Twin
Triple
N/A 379/16” 369/16” 353/4” 3413/16” N/A 459/16” 449/16” 433/4” 4213/16” N/A 519/16” 509/16” 493/4” 4813/16”
N/A* 341/16” 317/8” 311/8” 285/8” N/A* 421/16” 397/8” 391/8” 365/8” N/A* 481/16” 457/8” 451/8” 451/8”
N/A N/A 283/4” 247/8” N/A N/A
N/A 363/4” 327/8” N/A
N/A N/A 423/4” 387/8” N/A
SHOULDER
HEIGHT* CONT.
1254
Single
Twin
Triple
N/A 579/16” 569/16” 553/4” 5413/16” N/A 639/16” 629/16” 613/4” 6013/16” N/A 699/16” 689/16” 673/4” 6613/16”
N/A* 541/16” 517/8” 511/8” 485/8” N/A* 601/16” 577/8” 571/8” 545/8” N/A* 661/16” 637/8” 631/8” 605/8”
N/A N/A 603/4” 567/8” N/A
N/A N/A 483/4” 447/8” N/A
N/A N/A 543/4” 507/8” N/A
SHOULDER
HEIGHT* CONT.
1272
Single
Twin
Triple
N/A 75 /16” 74 /16” 73 /4” 7213/16”
N/A* 721/16” 697/8” 691/8” 665/8”
N/A N/A 663/4” 627/8” N/A
16
Sgl
1634
1654
1672
9
20
Sgl
24
Sgl
28
Sgl
2034
2434
2054
2472
9
12
Twin
2854
2454
2072
2834
2872
3
16
Twin
20
Twin
1242
1260
1642
1660
2042
2060
2442
2460
2842
2860
1248
1266
1648
1666
2048
2066
2448
2466
2848
2866
*Shoulder heights are the same for clad and wood.
N/A* = 12” Twin units must maintain a certain radius.
Therefore, shoulder heights vary.
24
Twin
28
Twin
20
Triple
24
Triple
34
= Egress Size Units – Check Local Codes for
exact requirements
42
Vertical
(Clad)
48
54
60
Rough Opening
Triple
Segmented
Vent Units
48”
66
Outside of Frame
Twin
42”
34”
72
Standard Colonial
Prairie
Cathedral
Grille
Options
Note:
• All grilles shown are optional.
• Cathedral Grille not available
in “GBG” or “PDL”
la
C
W
oo
d
4’15/16”
4’11/2”
3’111/4”
3’103/4”
437/8”
4’95/16”
4’91/2”
4’51/4”
4’63/4”
517/8”
5’15/16”
5’11/2”
4’111/4”
4’103/4”
557/8”
5’75/16”
5’71/2”
5’51/4”
5’43/4”
617/8”
41/8”
61/8”
715/16”
8”
97/8”
CLAD/WOOD
d
O
u
O tsid
ut
R
ou si e B
ric
O
gh de
ut
km
O Br
si
o
de pe ick
ni
m ul
G
F
ng ou d
la
ra
ss
m
ld
e
41
3’55/16”
3’51/2”
3’31/4”
3’23/4”
357/8”
CASEMENT
/A
WNING
CLAD P
ATIO
W
INDOWS
D
OORS
Clad & Wood Segment Head Picture Windows
Measuring
Height
Radius Rise
2’83/4”
2’83/4”
Shoulder Height
4228
4828
5428
6028
The shoulder height
of a Segment Picture
Window refers to the
side measurement as
shown above.
3’23/4”
3’23/4”
3428
4234
4834
5434
6034
Shoulder height does not include
sub sill or sill nosing. Trim accessories
may effect Rough Opening and
Masonry Opening.
3’103/4”
3’103/4”
3434
4242
4842
5442
6042
3448
4248
4848
5448
6048
3454
4254
4854
5454
6054
3460
4260
4860
5460
6060
3466
4266
4866
5466
6066
3472
4272
4872
5472
6072
5’43/4”
5’43/4”
4’103/4”
4’103/4”
The outside frame height
of a Segment Picture
Window refers to
the measurement at
the highest point as
shown above.
CLAD/WOOD
Note:
• All grilles are available in all units
• *Cathedral Grille not available in
“GBG” or “PDL”
Grille
Options
Old English
Wood
Clad
6’43/4”
6’43/4”
5’103/4”
5’103/4”
4’43/4”
4’43/4”
3442
Standard Colonial
Prairie
Cathedral*
CASEMENT/AWNING
WINDOWS
Clad & Wood Box Bay Windows
42
B OX B AY W INDOWS *
Outside Brickmould
Rough Opening
Outside Frame
Projection**
Glass Width
16”-16”
Center
N/A
3’6”
3’51/2”
1’83/4”
16”
16”-16”
Center
4’3”
3’6”
3’51/2”
1’107/8”
16”
CLAD HEIGHT
34”
CLAD WIDTH
Outside Brickmould
Rough Opening
Outside Frame
Projection**
Glass Width
WOOD WIDTH
Outside Brickmould
Rough Opening
Outside Frame
Glass
WOOD HEIGHT
20”-20”
Center
N/A
4’2”
4’11/2”
1’83/4”
20”
20”-20”
Center
4’11”
4’2”
4’11/2”
1’107/8”
20”
48”
60”
N/A
N/A
N/A
3’43/4” 4’63/4” 5’63/4”
3’41/4” 4’61/4” 5’61/4”
34”
48”
60”
34”
48”
60”
Outside Brickmould 3’51/8” 4’71/8” 5’71/8”
Rough Opening
3’43/4” 4’63/4” 5’63/4”
Outside Frame
3’41/4” 4’61/4” 5’61/4”
Glass
34”
48”
60”
12-16|16-12
48”
Center
N/A
4’51/4”
4’43/4”
1’83/4”
48”
48”
Center
5’21/4”
4’51/4”
4’43/4”
1’107/8”
48”
72”
N/A
6’63/4”
6’61/4”
72”
24”-24”
Center
N/A
4’10”
4’91/2”
1’83/4”
24”
24”-24”
Center
5’7”
4’10”
4’91/2”
1’107/8”
24”
60”
Center
N/A
5’51/4”
5’43/4”
1’83/4”
60”
60”
Center
6’21/4”
5’51/4”
5’43/4”
1’107/8”
60”
Note:
*Specify total wall clearance depth at time of
order. Includes siding or brick plus sheating
plus stud plus drywall.
**Side flanker windows are 12” wide vent
casements.
72”
6’71/8”
6’63/4”
6’61/4”
72”
12-20|20-12
12-48-12
12-24|24-12
12-60-12
34
48
60
72
Grille
Options
Standard Colonial
Note:
Note:
• *Must specify total wall
thickness at time of order
• Grille styles
available in
all units
• **Side flanker windows are
12” wide vent casements
Prairie
43
B OW W INDOWS
CLAD WIDTH
Outside Brickmould
Rough Opening
Outside Frame
Projection
Glass Width
WOOD WIDTH
Outside Brickmould
Rough Opening
Outside Frame
Projection
Glass Width
16”
4 Wide
N/A
7’01/2”
6’10”
91/8”
16”
16”
4 Wide
7’29/16”
6’1113/16”
6’95/16”
91/16”
16”
20”
4 Wide
N/A
8’41/4”
8’13/4”
101/2”
20”
20”
4 Wide
8’61/4”
8’31/2”
8’1”
107/16”
20”
24”
4 Wide
N/A
9’715/16”
9’57/16”
1115/16”
24”
24”
4 Wide
9’915/16”
9’73/16”
9’411/16”
1113/16”
24”
20”
5 Wide
N/A
10’37/8”
10’07/8”
147/8”
20”
20”
5 Wide
10’515/16”
10’215/16”
9’1115/16”
147/8”
20”
16”
5 Wide
N/A
8’81/2”
8’51/2”
1213/16”
16”
16”
5 Wide
8’101/2”
8’71/2”
8’41/2”
1213/16”
16”
24”
5 Wide
N/A
12’01/4”
11’91/4”
1615/16”
24”
24”
5 Wide
12’25/16”
11’115/16”
11’85/16”
1615/16”
24”
CASEMENT/AWNING
TRANSOMS
Clad & Wood Bow & Bay Windows
Projection – Face
of sheathing
to face of window
Bow Windows
4 Wide
30° B AY W INDOWS
20”
24”
20”
24”
16”
16”
20”
24”
16”
48” Ctr
48” Ctr
42” Ctr
42” Ctr
48” Ctr
34” Ctr
34” Ctr
34” Ctr
42” Ctr
N/A
Outside Brickmould
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Rough Opening
7’107/16”
6’83/16”
8’55/16”
9’11/4”
7’10”
7’47/16”
7’31/16”
8’61/4”
7’115/16”
Outside Frame
7’67/16”
6’47/16”
8’15/16”
8’81/4”
7’61/4”
6’115/16”
7’07/16”
7’75/16”
8’21/4”
Projection
227/8”
227/8”
283/8”
3313/16”
283/8”
3313/16”
227/8”
283/8”
3313/16”
Glass Width
16”|34”|16” 20”|34”|20” 24”|34”|24” 16”|42”|16” 20”|42”|20” 24”|42”|24” 16”|48”|16” 20”|48”|20” 24”|48”|24”
20”
24”
20”
24”
16”
16”
20”
24”
16”
WOOD WIDTH
48” Ctr
48” Ctr
42” Ctr
42” Ctr
48” Ctr
34” Ctr
34” Ctr
34” Ctr
42” Ctr
8’613/16”
9’111/16
7’117/8”
Outside Brickmould
6’97/8”
7’1111/16
7’57/8”
8’013/16”
8’711/16
7’413/16”
Rough Opening
7’83/4”
8’311/16”
8’109/16”
6’63/4”
7’111/16”
7’03/4”
7’911/16”
7’69/16”
8’49/16”
Outside Frame
7’43/4”
7’1111/16”
8’69/16”
6’23/4”
6’911/16”
7’29/16”
6’83/4”
7’511/16”
8’09/16”
Projection
2311/16”
291/8”
345/8”
2311/16”
291/8”
345/8”
2311/16”
291/8”
345/8”
Glass Width
16”|34”|16” 20”|34”|20” 24”|34”|24” 16”|42”|16” 20”|42”|20” 24”|42”|24” 16”|48”|16” 20”|48”|20” 24”|48”|24”
CLAD WIDTH
5 Wide
Bay Windows
34” Center Glass
45° B AY W INDOWS
20”
24”
20”
24”
16”
16”
20”
24”
16”
48” Ctr
48” Ctr
42” Ctr
42” Ctr
48” Ctr
34” Ctr
34” Ctr
34” Ctr
42” Ctr
N/A
Outside Brickmould
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Rough Opening
7’45/8”
6’211/16”
7’105/16”
8’4”
7’1”
6’1011/16”
6’85/16”
7’45/16”
7’10”
15
15
9
9
1
15
Outside Frame
7’0 /16”
8’01/4”
5’10 /16”
7’6 /16”
6’10 /4”
6’4 /16”
6’6 /16”
7’09/16”
7’61/4”
Projection
231/16”
231/16”
2811/16”
343/8”
2811/16”
343/8”
231/16”
2811/16”
343/8”
Glass Width
16”|34”|16” 20”|34”|20” 24”|34”|24” 16”|42”|16” 20”|42”|20” 24”|42”|24” 16”|48”|16” 20”|48”|20” 24”|48”|24”
24”
20”
20”
24”
16”
16”
20”
24”
16”
WOOD WIDTH
48” Ctr
48” Ctr
42” Ctr
42” Ctr
48” Ctr
34” Ctr
34” Ctr
34” Ctr
42” Ctr
8’63/16”
8’01/2”
7’67/8”
Outside Brickmould
6’47/8”
7’43/16”
7’07/8”
7’61/2”
8’03/16”
6’101/2”
Rough Opening
7’21/4”
7’77/8”
8’19/16”
6’01/4”
6’57/8”
6’119/16”
6’81/4”
7’17/8”
7’79/16”
Outside Frame
6’101/2”
7’41/8”
8’73/4”
5’81/2”
6’21/8”
6’713/16”
6’41/2”
6’101/8”
7’33/4”
Projection
239/16”
291/4”
347/8”
239/16”
291/4”
347/8”
239/16”
291/4”
347/8”
Glass Width
16”|34”|16” 20”|34”|20” 24”|34”|24” 16”|42”|16” 20”|42”|20” 24”|42”|24” 16”|48”|16” 20”|48”|20” 24”|48”|24”
CLAD WIDTH
42” Center Glass
48” Center Glass
Mull Details
B OW W INDOWS & 30° & 45° B AY W INDOWS
CLAD HEIGHT
28”
34”
N/A
N/A
Outside Brickmould
Rough Opening
2’103/4” 3’43/4”
1
Outside Frame
2’10 /4” 3’41/4”
Glass
28”
34”
WOOD HEIGHT
28”
34”
42”
48”
54”
60”
66”
N/A
4’03/4”
4’01/4”
42”
N/A
4’63/4”
4’61/4”
48”
N/A
5’03/4”
5’01/4”
54”
N/A
5’63/4”
5’61/4”
60”
N/A
6’03/4”
6’01/4”
66”
42”
Outside Brickmould 3’05/8” 3’65/8” 4’25/8”
Rough Opening
2’111/8” 3’51/8” 4’11/8”
Outside Frame
2’101/4” 3’41/4” 4’01/4”
Glass
28”
34”
42”
48”
54”
60”
66”
4’85/8”
4’71/8”
4’61/4”
48”
5’25/8”
5’11/8”
5’01/4”
54”
5’85/8”
5’71/8”
5’61/4”
60”
6’25/8”
6’11/8”
6’01/4”
66”
Projection – Face
of sheathing
to face of window
for 30° units
Projection – Face
of sheathing
to face of window
for 45° units
(Clad)
10° Bow
(Clad)
30° Bay
Note:
Note:
• Check with your local
dealer for additional
available window sizes
• Grille styles
available in
all units
Grille
Options
Standard Colonial
Prairie
CLAD
CASEMENT
/AWNING
PATIO
TRANSOMS
DOORS
44
Transoms
Q UARTER C IRCLE T RANSOMS **
16”
Sgl
Wood Out. BM Width*** 1’111/2”
Wood Out. BM Height*** 1’1023/32”
Rough Opening Width
1’91/4”
1’91/4”
Outside Frame Width
1’83/4”
1’83/4”
Glass Width
1713/16”
Glass Height
1713/16”
Standard Grille
1
Optional Grille
2
CLAD/WOOD
Left Hand
Right Hand
Quarter Circle
Transoms
20”
24”
Sgl
Sgl
2’31/2” 2’71/2”
2’223/32” 2’623/32”
2’11/4” 2’51/4”
2’11/4” 2’51/4”
2’03/4” 2’43/4”
2’03/4” 2’43/4”
2127/32” 2527/32”
2127/32” 2527/32”
1
1
2
3
28”
Sgl
2’111/2”
2’1023/32”
2’91/4”
2’91/4”
2’83/4”
2’83/4”
2927/32”
2927/32”
1
3
34”
Sgl
42”
Sgl
4’11/2”
3’51/2”
3’31/2”
3’223/32” 3’423/32” 4’023/32”
3’31/4” 3’111/4”
3’11/4”
3’31/4” 3’111/4”
3’11/4”
3’23/4” 3’103/4”
3’03/4”
3’23/4” 3’103/4”
3’03/4”
3327/32” 3527/32” 4327/32”
3327/32” 3527/32” 4327/32”
1
1
1
3
4
3
32”
Sgl
** Wood Outside Brickmould width/height listed. For Clad Outside Brickmould width: subtract
3/16” from the listed measurement, for Clad Outside Brickmould height: subtract 1/16”.
#1 - 4 Lite
Standard
Hub
#2 - 5 Lite
Optional
Hub
#3 - 7 Lite
Optional
Hub
#4 - 13 Lite
Optional
Hub
#9 Cathedral
**Note:
Small radius “GBG” Hubs must be
manufactured with 5/8” “GBG”
stock – even though remaining bars
may be 7/8”.
C IRCLE T OP T RANSOMS **
CLAD/WOOD
Circle Top
Transoms
Wood Out. BM Width***
Wood Out. BM Height***
Rough Opening Width
Outside Frame Width
Glass Width
Glass Height
Standard Grille
Optional Grille
CLAD/WOOD CONT.
20”
24”
28”
Sgl
Sgl
Sgl
2’31/2”
2’71/2” 2’111/2”
1’211/32” 1’411/32” 1’611/32”
2’51/4” 2’91/4”
2’11/4”
1’07/8”
1’27/8” 1’47/8”
2’03/4”
2’43/4” 2’83/4”
1’03/8”
1’23/8” 1’43/8”
2111/16” 2523/32” 293/4”
91/2”
111/2”
131/2”
1
1
1
N/A
N/A
N/A
16”
20”
24”
Twin
Twin
Twin
Wood Out. BM Width***
3’85/16” 4’45/16”
Wood Out. BM Height*** 1’1023/32” 2’223/32”
Rough Opening Width
3’6”
4’2”
1’91/4”
2’11/4”
Outside Frame Width
3’51/2”
4’11/2”
1’83/4”
2’03/4”
Glass Width
3817/32” 4617/32”
Glass Height
177/8”
217/8”
Standard Grille
1
1
Optional Grille
4
4
32”
Sgl
3’21/2”
1’811/32”
3’11/4”
1’67/8”
3’03/4”
1’63/8”
333/4”
151/2”
1
N/A
28”
Twin
34”
Sgl
3’51/2”
1’911/32”
3’31/4”
1’77/8”
3’23/4”
1’73/8”
353/4”
161/2”
1
N/A
16”
Triple
60”
42”
48”
54”
Sgl
Sgl
Sgl
Sgl
4’11/2” 4’71/2”
5’11/2”
5’71/2”
2’111/32” 2’411/32” 2’711/32” 2’1011/32”
3’111/4” 4’51/4” 4’111/4” 5’51/4”
1’117/8” 2’27/8”
2’57/8”
2’87/8”
3’103/4” 4’43/4” 4’103/4” 5’43/4”
1’113/8” 2’23/8”
2’53/8”
2’83/8”
4325/32” 4925/32” 5513/16” 6113/16”
231/2”
201/2”
261/2”
291/2”
1
1
2
2
3
3
4
5
24”
20”
Triple Triple
5’05/16” 5’85/16”
5’51/8” 6’51/8” 7’51/8”
2’623/32” 2’1023/32” 2’95/32” 3’35/32” 3’95/32”
4’10”
5’6”
5’27/8” 6’27/8” 7’27/8”
2’51/4”
2’91/4” 2’711/16” 3’111/16” 3’711/16”
4’91/2”
5’51/2”
5’23/8” 6’23/8” 7’23/8”
2’43/4”
2’83/4”
2’73/16” 3’113/16” 3’73/16”
549/16”
629/16”
597/16” 717/16” 837/16”
257/8”
297/8”
285/16” 345/16” 405/16”
2
2
2
2
2
6
6
6
6
7
#1 - 5 Lite
Standard
Hub
Monarch Flanker
Combination with
Segment Transom
and two Casement
Transoms.
#2 - 7 Lite
Standard
Hub
Monarch Casement
Windows, each
topped with a LeftHand/Right-Hand
Segment Transom.
#3 - 8 Lite
Optional
Hub
#4 - 13 Lite
Optional
Hub
#5 - 14 Lite
Optional
Hub
Monarch Twin
Awning/Picture
Window Combination
and Elliptical
Transom.
#6 - 19 Lite
Optional
Hub
#7 - 25 Lite
Optional
Hub
#9 Cathedral
Combination
Options
will not line up with the window below.
45
E LLIPTICAL T RANSOMS *
34”
Sgl
3’51/2”
Wood Out. BM Width**
Wood Out. BM Height** 1’415/32”
3’31/4”
Rough Opening Width
1’3”
3’23/4”
Outside Frame Width
1’21/2”
3511/16”
Glass Width
115/8”
Glass Height
1
Standard Grille
N/A
Optional Grille
16”
CLAD/WOOD CONT.
Twin
3’85/16”
Rough Opening Width
3’6”
1’31/2”
Outside Frame Width
3’51/2”
1’3”
Glass Width
387/16”
Glass Height
121/8”
Standard Grille
1
Optional Grille
N/A
CLAD/WOOD
42”
48”
Sgl
Sgl
4’71/2”
4’11/2”
1’515/32” 1’615/32”
3’111/4” 4’51/4”
1’4”
1’5”
3’103/4” 4’43/4”
1’31/2”
1’41/2”
4311/16” 4911/16”
125/8”
135/8”
1
1
3
3
20”
24”
Twin
Twin
54”
60”
Sgl
Sgl
5’11/2” 5’71/2”
1’631/32” 1’731/32”
4’111/4” 5’51/4”
1’51/2” 1’61/2”
4’103/4” 5’43/4”
1’5”
1’6”
5511/16” 6111/16”
141/8”
151/8”
2
2
4
4
16”
28”
Triple
Twin
4’45/16” 5’05/16”
1’531/32” 1’631/32”
4’2”
4’10”
1’41/2” 1’51/2”
1
4’1 /2” 4’91/2”
1’4”
1’5”
467/16” 547/16”
131/8”
141/8”
1
2
3
4
5’85/16”
1’731/32”
5’6”
1’61/2”
5’51/2”
1’6”
627/16”
151/8”
2
4
#1 - 5 Lite
Standard
Hub
#2 - 7 Lite
Standard
Hub
#3 - 9 Lite
Optional
Hub
#4 - 13 Lite
Optional
Hub
*Note:
Small radius “GBG” Hubs must be
manufactured with 5/8” GBG”
stock – even though remaining
bars may be 7/8”.
#9 Cathedral
20”
Triple
Elliptical
Transoms
24”
Triple
7’51/8”
5’51/8” 6’51/8”
1’715/32” 1’831/32” 1’1015/32”
5’27/8” 6’27/8”
7’27/8”
1’6”
1’71/2”
1’9”
5’23/8” 6’23/8”
7’23/8”
1’51/2”
1’7”
1’81/2”
595/16” 715/16” 8311/32”
145/8”
161/8”
175/8”
2
2
2
4
4
4
E YEBROW T RANSOMS *
CLAD/WOOD
Wood Out. BM Height**
Rough Opening Width
Outside Frame Width
Glass Width
Glass Height
Standard Grille
Optional Grille
CLAD/WOOD CONT.
Wood Out. BM Height**
Rough Opening Width
Outside Frame Width
Glass Width
Glass Height
Standard Grille
Optional Grille
34”
Sgl
3’51/2”
1’415/32”
3’31/4”
1’3”
3’23/4”
1’21/2”
3411/16”
115/8”
1
N/A
16”
Twin
3’85/16”
1’431/32”
3’6”
1’31/2”
3’51/2”
1’3”
375/16”
121/8”
1
N/A
42”
Sgl
4’11/2”
1’515/32”
3’111/4”
1’4”
3’103/4”
1’31/2”
423/16”
125/8”
1
3
20”
Twin
4’45/16”
1’531/32”
4’2”
1’41/2”
4’11/2”
1’4”
4427/32”
131/8”
1
3
48”
Sgl
4’71/2”
1’615/32”
4’51/4”
1’5”
4’43/4”
1’41/2”
4715/16”
135/8”
1
3
24”
Twin
5’05/16”
1’631/32”
4’10”
1’51/2”
4’91/2”
1’5”
5213/32”
141/8”
2
4
54”
60”
Sgl
Sgl
#2 - 7 Lite
#1 - 5 Lite
Standard
Standard
5’11/2” 5’71/2”
Hub
Hub
31
31
1’6 /32” 1’7 /32”
1
1
4’11 /4” 5’5 /4”
#3 - 9 Lite
#4 - 13 Lite
Optional
Optional
1’51/2” 1’61/2”
Hub
Hub
4’103/4” 5’43/4”
1’5”
1’6”
#9 - Cathedral
539/16” 5911/32”
1
1
14 /8”
15 /8”
2
2
4
4
24”
28”
16”
20”
Triple
Twin
Triple Triple
5’85/16” 5’51/8”
6’51/8”
7’51/8”
1’731/32” 1’715/32” 1’831/32” 1’1015/32”
5’6”
5’27/8”
6’27/8”
7’27/8”
1’61/2”
1’6”
1’71/2”
1’9”
7’23/8”
5’51/2” 5’23/8”
6’23/8”
1’6”
1’51/2”
1’7”
1’81/2”
601/32” 571/32” 6817/32” 803/32”
151/8”
145/8”
161/8”
175/8”
2
2
2
2
4
4
4
4
*Note:
Small radius “GBG” Hubs must
be manufactured with 5/8” GBG”
stock – even though remaining
bars may be 7/8”.
Eyebrow
Transoms
3/16” from the listed measurement, for Clad Outside Brickmould height: subtract 1/16.
Combination
Options
Monarch Twin
Awning/Picture
Window Combination
and Elliptical
Transom.
CASEMENT
/A
WNING
CLAD P
ATIO
TD
RANSOMS
OORS
Transoms
CASEMENT
/AWNING
CLAD
TRANSOMS
PATIO
DOORS
46
Transoms
S EGMENT T RANSOMS
16”
Sgl
Wood Out. BM Width** 1’111/2”
Rough Opening Width
1’91/4”
Outside Frame Width
1’83/4”
1’3”
Leg Height
1’1”
Glass Width
177/8”
Glass Height
121/8”
Standard Grille
1
Optional Grille
N/A
16”
CLAD/WOOD
Twin
3’61/16”
Rough Opening Width
3’51/2”
Outside Frame Width
1’511/16”
1’1”
Leg Height
385/8”
Glass Width
1413/16”
Glass Height
1
Standard Grille
N/A
Optional Grille
CLAD/WOOD
Segment
Transoms
20”
24”
28”
Sgl
Sgl
Sgl
1
1
2’3 /2” 2’7 /2” 2’111/2”
1’6”
1’61/8”
1’71/16”
2’91/4”
2’11/4” 2’51/4”
1’43/8” 1’41/2”
1’57/16”
2’03/4” 2’43/4”
2’83/4”
1’37/8”
1’4”
1’415/16”
1’1”
1’1”
1’1”
217/8”
297/8”
257/8”
13”
131/8”
141/16”
1
1
1
N/A
N/A
N/A
20”
24”
28”
Twin
Twin
Twin
5
5
4’4 /16” 5’0 /16” 5’85/16”
1’927/32” 1’1027/32” 2’13/32”
4’21/16” 4’101/16” 5’61/16”
1’83/8” 1’93/8” 1’115/8”
4’11/2” 4’91/2”
5’51/2”
1’77/8” 1’87/8” 1’111/8”
1’1”
1’1”
1’1”
465/8”
545/8”
625/8”
17”
18”
201/4”
1
2
2
N/A
3
3
34”
Sgl
3’51/2”
1’73/16”
3’31/4”
1’59/16”
3’23/4”
1’51/16”
1’1”
357/8”
143/16”
1
N/A
16”
Triple
5’51/8”
2’01/16”
5’27/8”
1’109/16”
5’23/8”
1’101/16”
1’1”
591/2”
193/16”
2
3
42”
Sgl
4’11/2”
1’93/16”
3’111/4”
1’79/16”
3’103/4”
1’71/16”
1’1”
437/8”
163/16”
1
N/A
20”
Triple
6’51/8”
2’1”
6’27/8”
1’111/2”
6’23/8”
1’11”
1’1”
711/2”
201/8”
2
3
54”
60”
48”
Sgl
Sgl
Sgl
4’71/2” 5’11/2” 5’71/2”
1’11” 1’111/8” 2’1”
4’51/4” 4’111/4” 5’51/4”
1’93/8” 1’91/2” 1’113/8”
4’43/4” 4’103/4” 5’43/4”
1’87/8”
1’9” 1’107/8”
1’1”
1’1”
1’1”
497/8”
557/8” 617/8”
18”
181/8”
20”
2
1
2
3
N/A
3
24”
Triple
7’51/8”
2’47/8”
7’27/8”
The leg height
2’33/8”
of a Segment
3
7’2 /8”
Transom refers
to the side
2’27/8”
measurement as
1’1”
shown above.
831/2”
24”
2
3
#1 - 5 Lite
Standard
Hub
#4 - 13 Lite
Optional
Hub
#2 - 7 Lite
Standard
Hub
#9 Cathedral
The outside frame
height of a
Segment Transom
refers to the
measurement at
the highest point
as shown above.
3/16” from the listed measurement, for Clad Outside Brickmould height: subtract 1/16” from the
listed measurement.
LH/RH S EGMENT T RANSOMS
16”
Sgl
1’91/4”
Rough Opening Width
1’83/4”
Outside Frame Width
1’3”
1’1”
Leg Height
177/8”
Glass Width
121/8”
Glass Height
1
Standard Grille
N/A
Optional Grille
16”
CLAD/WOOD
Twin
3’61/16”
Rough Opening Width
3’51/2”
Outside Frame Width
1’511/16”
1’1”
Leg Height
385/8”
Glass Width
1413/16”
Glass Height
1
Standard Grille
N/A
Optional Grille
CLAD/WOOD
Left Hand
Right Hand
Segment
Transoms
20”
24”
Sgl
Sgl
2’31/2” 2’71/2”
1’6”
1’61/8”
2’11/4” 2’51/4”
1’43/8” 1’41/2”
2’03/4” 2’43/4”
1’37/8”
1’4”
1’1”
1’1”
257/8”
217/8”
13”
131/8”
1
1
N/A
N/A
20”
24”
Twin
Twin
4’45/16” 5’05/16”
1’927/32” 1’1027/32”
4’21/16” 4’101/16”
1’83/8” 1’93/8”
4’11/2” 4’91/2”
1’77/8” 1’87/8”
1’1”
1’1”
465/8”
545/8”
17”
18”
1
2
N/A
3
28”
Sgl
2’111/2”
1’71/16”
2’91/4”
1’57/16”
2’83/4”
1’415/16”
1’1”
297/8”
141/16”
1
N/A
28”
Twin
5’85/16”
2’13/32”
5’61/16”
1’115/8”
5’51/2”
1’111/8”
1’1”
625/8”
201/4”
2
3
34”
Sgl
3’51/2”
1’73/16”
3’31/4”
1’59/16”
3’23/4”
1’51/16”
1’1”
357/8”
143/16”
1
N/A
16”
Triple
5’51/8”
2’01/16”
5’27/8”
1’109/16”
5’23/8”
1’101/16”
1’1”
591/2”
193/16”
2
3
42”
Sgl
4’11/2”
1’93/16”
3’111/4”
1’79/16”
3’103/4”
1’71/16”
1’1”
437/8”
163/16”
1
N/A
20”
Triple
6’51/8”
2’1”
6’27/8”
1’111/2”
6’23/8”
1’11”
1’1”
711/2”
201/8”
2
3
54”
60”
48”
Sgl
Sgl
Sgl
4’71/2” 5’11/2” 5’71/2”
1’11” 1’111/8” 2’1”
4’51/4” 4’111/4” 5’51/4”
1’93/8” 1’91/2” 1’113/8”
4’43/4” 4’103/4” 5’43/4”
1’87/8”
1’9” 1’107/8”
1’1”
1’1”
1’1”
557/8” 617/8”
497/8”
18”
181/8”
20”
1
2
2
N/A
3
3
24”
Triple
7’51/8”
2’47/8”
7’27/8”
The leg height
2’33/8”
of a Left/Right
7’23/8”
Hand Segment
2’27/8”
Transom refers
to the side
1’1”
measurement
831/2”
as shown
24”
above.
2
3
#1 - 3 Lite
Standard
Hub
#3 - 7 Lite
Optional
Hub
#2 - 4 Lite
Standard
Hub
#9 Cathedral
The outside frame
height of a Left/
Right Hand
Segment Transom
refers to the
measurement at the
highest point as
shown above.
3/16” from the listed measurement, for Clad Outside Brickmould height: subtract 1/16” from the
listed measurement.
Monarch Twin
Awning/Picture
Window Combination
and Elliptical
Transom.
Monarch Casement
Windows, each
topped with a LeftHand/Right-Hand
Segment Transom.
Monarch Flanker
Combination with
Segment Transom
and two Casement
Transoms.
Combination
Options
47
Box Bays
*SPECIFY TOTAL WALL THICKNESS AT TIME OF ORDER
Box Bay
Horizontal Section
(Clad)
(Wood)
Projection
Total Wall
Thickness*
Total Wall
Thickness*
Projection
Box Bay
Horizontal Section
Rough Opening
Rough Opening
Masonary Opening
Masonary Opening
Standard Wood & Clad Venting Units
Vertical
Brick Veneer / Drywall
Horizontal
Brick Veneer / Drywall
(Clad)
(Clad)
Vertical Section
(Wood)
CASEMENT
/A
WNING
CLAD P
ATIO
TD
RANSOMS
OORS
Clad & Wood Unit Detail
CLAD HINGED
PATIO DOORS
Clad Hinged Patio Doors
48
Standard 4-9/16” Jamb with
option for factory applied wider
Extension Jambs.
Standard 3/4” Clear Tempered Monarch
High Test Insulated Glass. Other glazing
options: Low-E , Bronze, Gray and
Obscure Tempered glass.
Frame clad of .080 Extruded
Aluminum with Low Maintenance
Electrostatic Applied Polyester
Enamel – available in White,
Cream, Sand, Bronze or Green.
permanent life and
Classic Mortise and Tenon
Corner Joint.
Thermo Plastic Rubber Sweep
Standard Aluminum Sill. Other
sill options are Bronze, Brass
and Mill finish Handicap.
49
SILL
FRAME
Frame members shall be select finger jointed softwood
pine treated with repellant preservative in accordance
with WDMA IS 4-94. Exterior frame members shall be
extruded aluminum clad up to .080 (not a lightweight .040” rolled stock like so many others use) in
thickness, sealed at the corners and fastened with a
lexan corner key system and stainless steel screws.
FINISH
The entire CHPD system shall be capped with
extruded aluminum. The wall thicknesses shall exceed
.080”. All exterior clad painted parts shall be finished
with a high solids polyester thermal setting “No-Mar”
finish that requires minimal maintenance and resists
scratches and surface damage better than most other
finishes on the market. The finish shall meet or
exceed the AAMA 2603 Industry Standard which
meets the 1000 hour salt spray test criteria. Standard
colors are White, Cream, Sand, Bronze, and Green.
Sill shall be aluminum with an adjustable synthetic
threshold. The sill shall be fully adjustable, with a
range of over 1/4” to fine-tune every installation for
maximum water and air protection. Sill finish options
(in addition to aluminum) include brass or bronze
anodized on standard 4-9/16" and 6-9/16”depth
units. Inswing french doors with screen kits are not
available with Brass or Bronze finish options. An ADA
compliant “handicapped” sill is
also available in
mill finish only. (No screen options are available with
the ADA sill. ADA sills are not available for 6-9/16"
and larger jamb depths.) Screen sill tracks are standard
on all multipanel door systems with standard sills. Note
that 2 and 3 panel French applications require an
extension kit to house the second screen. This kit
provides sufficient depth to allow for either a 4-9/16" or
6-9/16" installation.
SCREENS
White
Cream
Sand
Bronze
Green
Printing limitations make accurate color duplication impossible. For exact color matching,
please refer to actual color samples at your Monarch dealer.
W E AT H E R S T R I P P I N G
Weatherstripping shall be foam filled polyethylene
factory installed on heads and jambs of both inswing and out-swing doors and at the bumper sill of
the out-swing door for maximum protection from air
and water infiltration. Sweeps are manufactured from
a TPR (Thermo Plastic Rubber) material which has
superior UV resistance and better memory retention
and resistance to paint damage than soft vinyl
weatherstrips and sweeps. Monarch’s unique fixed
panel Z-Flashing has proven itself over years of
exposure to be one of the best designs to resist water
penetration. Additional improvements have been
made, utilizing similar principles, in the fixed panel
vertical weatherstripping making water penetration
virtually impossible.
CLAD NAIL FIN
during shipping. Nail fins then lock into
place for easy installation.
Screens are optional on all multiple panel doors. They
consist of a heavy extruded aluminum frame with
charcoal fiberglass mesh. Screens shall be provided
with adjustable rollers and shipped in separate cartons,
color matched to the exterior cladding finish.
Monarch’s two panel French doors have, available as
an option, a twin screen kit that allows the entire
opening to be fully screened. This option must be
specified at the time of the order, because a frame
extension kit must be applied at the factory to accommodate the second screen. This option is also available in Triple French doors (French doors with an
adjacent fixed panel). Quad French doors with two
adjacent fixed panels utilize a by-parting screen system
that only requires one screen track. Not available on
French doors with sidelites.
C LAD
BRICKMOULD
Clad Brickmould is available as an option on all
Clad in-swing and out-swing configurations. Note
that on two or three-panel French in-swing doors with
the screen extension kit applied to the frame, the
Clad Brickmould option locks the frame into a
6-9/16" jamb depth. To achieve a 4-9/16" jamb
depth with these two options, a 2" filler must be
applied to the sheathing prior to mounting the door
in the wall. Without the Clad Brickmould option,
these doors can be installed in either a 4-9/16" or a
6-9/16" wall depth.
CLAD HINGED
PATIO DOORS
C LAD
H INGED
PATIO DOORS
50
GRILLES
M U LT I P O I N T
Monarch three point locking system is available as an
option for extra security on 6/6, 6/8 and 7/0 heights and
four point system on 8/0 heights, in-swing and outswing.
The locking system offers a unique spring-loaded latch
system with latch strikes that are two piece reinforced roll
cam strike plates. All three (or 4) latches become three (or
4) dead bolts when secured with the keyed lock or dead
bolt latch. The “panic release” system allows the occupant
to immediately exit the dead bolt locked door with a
simple turn of the handle. French doors with multipoint
will have a multipoint hardware assembly on the active
panel engaging three (or 4) roller strikes on the 1” thick tastragal. The t-astragal mounted to the inactive (dummy)
panel, utilizes 7” brass head & foot bolts (16” on 8/0
doors) to secure the inactive panel to the head and sill of
the frame, for easy accessibility. Dummy handles are
standard for French door assemblies with the optional
multipoint hardware. Handle sets and hinges are available in Bright Brass, Antique Nickel, Oil Rubbed Bronze,
or Brushed Chrome (handle only) finishes. The stile edge
hardware of the multipoint is standard as a Bright Brass
finish, but can be special ordered in other finishes.
Contact Monarch for keyed-alike information.
HINGES
&
(See right for details)
Grilles are available and optional on all door units.
Monarch offers Full Surround Grilles available 3/4”
or 1-1/8”, in addition to “PDL” (Permanent Divided
Lite with bronze finish GBG (standard), available in
3/4” or 1-1/8”, “SDL” (Simulated Divided Lite, No
GBG) available 3/4”, 1-1/8”, 2” and “GBG”
(Grilles Between the Glass) 5/8” or 7/8” grille
configurations. Our “PDL” system is the smart
alternative to the old True Divided Lite system – the
initial cost is less, and better energy performance
guarantees years of lower energy bills. Exterior grille
bars will match the window finish as specified. Interior
bars are of Clear Ponderosa Pine. Exterior bars are
primed aluminum for wood units or White, Cream,
he unique profile of Monarch
’s
Monarch’s
snugly into the panel with
can be easily removed for cleaning.
seven (7) finish colors. Monarch is expanding our
GBG option by offering a two-tone GBG (Bronze
Exterior/White Interior, Sand Exterior/White Interior),
available in 5/8” and 7/8”. Design options are
limitless with numerous standard lite layout options as
well as the availability of optional custom lite layouts.
HARDWARE
SDL
Monarch’s Clad Patio Panel system comes standard with
Bright Brass Finish adjustable hinges on all in-swing doors
and Stainless Steel adjustable hinges on all
out-swing doors. These hinges have
approximately 1/4" vertical adjustment
and 3/16" horizontal (plane of the wall)
adjustment. Adjustable hinges are
available in Bright Brass, Stainless Steel, Antique Nickel and Oil Rubbed Bronze on the inswing
doors. Stainless Steel is the only hinge available on the
outswing doors.French doors shall have a solid brass
head and foot bolt mounted in a heavy, aluminum
reinforced T-Astragal that is 1" thick.
Glass
Glass
Attached
Wood
Interior
Grille
Glass
/ 4"
1
/4"
1
Attached
Aluminum
Exterior
Grille
Attached
Wood
Interior
Grille
Attached
Aluminum
Exterior
Grille
Simulated
Divided Lite
Twin Grid System
available in
GLAZING
(SEE
B E L O W F O R D E TA I L S )
All Monarch door panels and sidelights are glazed with
3/4" thick Tempered clear glass or optional
Low-E, Bronze, Gray or Obscure.
Outside
Surface
Glass
Options
Glass
Tempered Glass
Inside
1 2
3 4
Clear
Bronze
Obscure
Gray
Low-E
51
1/0
SL
1/4
SL
1/8
SL
2/6
Sgl
2/8
Sgl
3/0
Sgl
1/0-3/0-1/0
Combo
1/4-3/0-1/4
Combo
1/8-3/0-1/8
Combo
Rough
Opening
14”
18”
22”
32”
34”
38”
64”
72”
80”
Outside
Frame
131/2”
171/2”
211/2”
311/2”
331/2”
371/2”
631/2”
711/2”
791/2”
Outside
BM
161/16”
201/16”
241/16”
341/16”
361/16”
401/16”
661/16”
741/16”
821/16”
Glass
8”
12”
16”
211/2”
231/2”
271/2”
8”-271/2”-8”
12”-271/2”-12”
16”-271/2”-16”
WIDTH
4/0
Twin
5/0
Twin
5/4
Twin
6/0
Twin
7/6
Triple
8/0
Triple
9/0
Triple
10/0
Quad
10/8
Quad
12/0
Quad
Rough
Opening
51”
63”
67”
75”
94”
100”
112”
125”
133”
149”
Outside
Frame
501/2”
621/2”
661/2”
741/2”
931/2”
991/2”
1111/2”
1241/2”
1321/2”
1481/2”
Outside
BM
531/16”
651/16”
691/16”
771/16”
961/16”
1021/16”
1141/16”
1271/16”
1351/16”
1511/16”
Glass
151/2”
211/2”
231/2”
271/2”
211/2”
231/2”
271/2”
211/2”
231/2”
271/2”
INSWING
HEIGHT
6/6
Retro
6/8
Standard
7/0
8/0
Rough
Opening
1
80 /8”
5
82 /8”
5
86 /8”
5
Outside
Frame
795/8”
821/8”
Outside
BM
8015/16”
Glass
68”
WIDTH
OUTSWING
HEIGHT
CLAD HINGED
PATIO DOORS
Sidelites
Single Doors
6/6
Retro
6/8
Standard
7/0
8/0
98 /8”
Rough
Opening
3
79 /16”
11
81 /16”
11
85 /16”
9711/16”
861/8”
981/8”
Outside
Frame
7811/16”
813/16”
853/16”
973/16”
837/16”
877/16”
997/16”
Outside
BM
80”
821/2”
861/2”
981/2”
701/2”
741/2”
861/2”
Glass
68”
701/2”
741/2”
861/2”
French Doors
*Handicap Sill will reduce In-Swing height by 1-1/2” and Out-Swing height by 9/16”
**Custom sizes available: Frame heights from 60” to 98-1/8”; Panel widths from 1/6 to 3/0
Unit Details
Swinging French Door with
Double By-Pass Screen
Horizontal Section
Swinging French Door Vent
Panel with Double By-Pass
Screen Vertical Section
Clad Panel Transom
Vertical Detail
Clad Panel Transom
Vertical Mull Detail
Swinging French Door Fixed
Panel with 6-9/16” Extension
Jamb Vertical Section
Terrace Doors
Triple
Terrace Doors
Clad Direct Set Transom
Vertical Section
Quad
French Doors
6-9/16” Jamb
Standard Colonial
6/6, 6/8, 7/0
4-9/16” Jamb
Standard Colonial
8/0
Prairie
Grille
Options
CLAD HINGED
PATIO DOORS
Transoms
52
clad direct set transoms for clad hinged patio doors
CLAD SASH WIDE STILE PANEL TRANSOMS
2/6
Sgl
WIDTH
Clad Wide Stile
Panel Transoms
(For CHPD
Doors only)
2/8
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
7/6
8/0
9/0
Twin Twin Triple Triple Triple
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2” 931/2”
Unit
Rough
Opening 32”
Cont
Glass
Comb
Glass
34”
38”
63”
51”
67”
75”
21 /2” 23 /2” 27 /2” 40 /8” 52 /8” 56 /8” 64 /8”
1
1
1
5
5
5
5
991/2” 1111/2”
HEIGHT
1/0
1/4
2/0
Unit
131/2”
171/2”
251/2”
94”
100”
112”
Rough
Opening
14”
18”
26”
n/a
n/a
n/a
Glass
8”
12”
20”
231/2”
271/2”
211/2” 231/2” 271/2” 151/2” 211/2” 231/2” 271/2” 211/2”
CLAD NARROW STILE PANEL TRANSOMS FOR
SIDELITES ONLY
1/0
SL
WIDTH
Clad Narrow Stile
Panel Transoms
(For CHPD
Doors only)
1/4
SL
1/8
SL
131/2” 171/2” 211/2”
Unit
HEIGHT
1/0
1/4
2/0
Unit
131/2”
171/2”
251/2”
Rough
Opening
14”
18”
22”
Rough
Opening
14”
18”
26”
Glass
8”
12”
16”
Glass
8”
12”
20”
Colonial Grille for
1/8 width by 1/0 &
1/4 heights.
Colonial Grille for
1/0 & 1/4 width by
2/0 height.
Colonial Grille for 1/0
& 1/4 heights. Vertical
bars are equally spaced.
Optional Prairie grille
for 1/0 & 1/4 heights.
One horizontal
grille bar.
heights. Vertical bars
are equally spaced. 3/0
heights will have two
horizontal bars.
Optional Prairie grille
Two horizontal
grille bars.
Prairie Grille
1/0 width by 1/0 & 1/4
height. Above grilles
are handed, LH shown.
Prairie Grille
1/4 & 1/8 width by 1/0
& 1/4 heights.
Colonial Grille
for 1/8 width by
2/0 height.
Prairie Grille
1/0 width by 2/0
heights. Above
grilles are
handed,
LH shown.
Prairie Grille
1/4 & 1/8 width
by 2/0 heights.
CLAD/WOOD DIRECT SET TRANSOMS
2/6
Sgl
WIDTH
Clad Direct Set
Transoms
(For all Doors)
2/8
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
7/6
8/0
9/0
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2” 931/2”
Unit
Rough
Opening
32”
34”
38”
51”
63”
67”
75”
991/2” 1111/2”
94”
I/S Cont 293/4” 313/4” 353/4” 483/4” 603/4” 643/4” 723/4” 913/4”
Glass
Comb
293/4” 313/4” 353/4” 231/2” 291/2” 311/2” 351/2” 293/8”
Glass
100”
112”
973/4” 1093/4”
313/8”
HEIGHT
1/0
1/4
2/0
Unit
131/2”
171/2”
251/2”
Rough
Opening
14”
18”
26”
Glass
113/4”
153/4”
233/4”
HEIGHT
1/0
1/4
2/0
Unit
131/2”
171/2”
251/2”
353/8”
Optional Prairie Grille
Only one horizontal bar.
horizontal bars.
Two horizontal bars.
horizontal bars.
Outswing glass - (Inswing -1-1/8”) in the width
CLAD/WOOD SASH TRANSOMS
2/6
Sgl
WIDTH
Clad / Wood
Sash Transoms
(For Wood, Steel
& Fiberglass
Doors only)
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
7/6
8/0
9/0
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2” 931/2”
Unit
Rough
Opening
Cont
Glass
Comb
Glass
2/8
Sgl
991/2” 1111/2”
32”
34”
38”
51”
63”
67”
75”
94”
100”
112”
Rough
Opening
14”
18”
26”
27”
29”
33”
46”
58”
62”
70”
N/A
N/A
N/A
Glass
9”
13”
21”
27”
29”
33”
21”
27”
29”
33”
27”
29”
33”
Con.t = Continuous Transom Unit. This single transom is designed to expand across multiple Doors.
Comb. = Combination Transom Unit. These multiple transoms are designed to line up with multiple doors.
See pictures below.
Monarch Clad French
Door with wide-stile
Continuous Transom
and Prairie Grilles.
Monarch Clad
Terrace Door with
Continuous Direct Set
Transom and
Standard Colonial
Grille.
Note: Grilles in transom
do not line up.
Note: Transom stiles
match stiles on doors below.
Monarch Clad Triple
Terrace Door with
wide-stile Composite
Transoms (no grille).
Note: Transom stiles match
stiles on doors below.
Combination
Options
53
clad direct set transoms for clad hinged patio doors
#1 - 5 Lite
Standard
Open Hup for
Single & 4/0
Double Doors.
#2 - 7 Lite
Standard
Open Hub for
Double Doors
& Sidelite
Units,
except 4/0.
#6 - 19 Lite
Optional
Open Hub for
Double Doors,
except 4/0.
#1 - 5 Lite
Standard
Open Hub
for Single
& 4/0
Double
Doors.
#4 - 9 Lite
Optional
Open Hub for
Sidelite Units
& 4/0 Double
Doors.
CLAD DIRECT SET
CIRCLE TOP TRANSOMS
#3 - 9 Lite
Optional Open
Hub for 4/0
Double Doors.
#1 - 5 Lite
Standard Open
Hub for Single
& 4/0 Double
Doors.
#9 - Cathedral
WIDTH
#3 - 9 Lite
Optional Open
Hub for 4/0
Double Doors.
#9 - Cathedral
2/6
Sgl
5/4
Twin
6/0
Twin
34”
38”
51”
63”
67”
75”
2/8
Sgl
3/0
4/0
5/0
Sgl Twin Twin
5/4
6/0
Twin Twin
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
Rough
32”
Opening
HEIGHT
Unit
2/6
Sgl
2/8
Sgl
3/0
4/0
5/0
Sgl Twin Twin
5/4
6/0
Twin Twin
153/4” 163/4” 183/4” 251/4” 311/4” 331/4” 371/4”
Rough
161/4” 171/4” 191/4” 253/4” 313/4” 333/4” 373/4”
Opening
Glass
13”
14”
16”
HEIGHT
2/6
Sgl
2/8
Sgl
3/0
Sgl
22”
28”
30”
34”
4/0
5/0
5/4
Twin Twin Twin
6/0
Twin
Clad Direct Set
Circle Top
Transoms
34”
38”
51”
63”
67”
75”
295/8” 315/8” 355/8” 485/8” 605/8” 645/8” 725/8”
Unit
131/2” 133/4” 161/2”
Rough
14”
Opening
141/4”
Glass
113/4”
12”
HEIGHT
2/6
Sgl
2/8
Sgl
17”
16”
191/4” 171/2” 181/2”
161/2” 193/4”
18”
19”
143/4” 141/4” 171/2” 153/4” 163/4”
Clad Direct Set
Elliptical
Transoms
CLAD DIRECT SET
EYEBROW TRANSOMS
WIDTH
2/6
Sgl
Unit
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
Rough
Opening 32”
Glass
#2 - 7 Lite
Standard Open
Hub for
Double Doors
& Sidelite
Units,
except 4/0.
#4 - 13 Lite
Optional Open
Hub for Double
Doors & Sidelite
Units, except 4/
0.
#3 - 9 Lite
Optional Open
Hub for 4/0
Double Doors.
4/0
5/0
Twin Twin
CLAD DIRECT SET
ELLIPTICAL TRANSOMS
Glass
#2 - 7 Lite
Standard Open
Hub for Double
Doors &
Sidelite Units,
except 4/0.
#4 - 13 Lite
Optional Open
Hub for Double
Doors &
Sidelite Units,
except 4/0.
#1 - 5 Lite
Standard Open
Hub for Single
& 4/0 Double
Doors.
#9 - Cathedral
3/0
Sgl
273/4” 293/4” 333/4” 453/4” 573/4” 613/4” 693/4”
Unit
#4 - 13 Lite
Optional Open
Hub for Double
Doors &
Sidelite Units,
except 4/0.
2/8
Sgl
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
Rough
32”
Opening
Glass
#2 - 7 Lite
Standard Open
Hub for
Double Doors
& Sidelite
Units,
except 4/0.
2/6
Sgl
WIDTH
Unit
#9 - Cathedral
CLAD HINGED
PATIO DOOR
Transoms
2/8
Sgl
34”
275/8” 30”
3/0
Sgl
4/0
Twin
38”
51”
347/8”
46”
5/0
5/4
6/0
Twin Twin Twin
63”
67”
75”
593/8” 631/8” 703/4”
Unit
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
Twin Twin
711/16” 91/16” 131/32” 1011/32” 181/8” 173/4” 1723/32”
Rough
3
9
17
27
5
1
7
Opening 8 /16” 9 /16” 13 /32” 10 /32” 18 /8” 18 /4” 18 /32”
Glass
515/16” 75/16” 119/32” 819/32” 163/8”
16”
1531/32”
Clad Direct Set
Eyebrow
Transoms
CLAD DIRECT SET
SEGMENT TRANSOMS
WIDTH
Unit
Rough
Opening
Glass
2/6
Sgl
2/8
Sgl
3/0
4/0
5/0
Sgl Twin Twin
5/4
6/0
Twin Twin
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
32”
34”
38”
51”
63”
67”
75”
293/4” 313/4” 353/4” 483/4” 603/4” 643/4” 723/4”
Combination
Options
HEIGHT
Unit
2/6
Sgl
2/8
Sgl
3/0
4/0
5/0
Sgl Twin Twin
165/8” 171/8” 167/8” 183/4” 221/8” 231/2” 231/8”
Rough
171/8” 175/8” 173/8” 191/4” 225/8”
Opening
Glass
5/4
6/0
Twin Twin
147/8” 153/8”
Monarch Clad
French Door with
Circle Top Transom
and optional intricate
bar grille.
15”
17”
24”
235/8”
203/8” 215/8” 211/4”
Monarch Clad
Terrace Door with
Elliptical Transom
and standard grille
above the unit.
Clad Direct Set
Segment
Transoms
Monarch Clad Terrace
Door with Segment
Transom and standard
grille above the unit.
EXTERIOR
DOORS
Wood & Fiberglass Doors
54
F IBERGLASS D OOR P ANELS
F RAME T YPE
Virtually maintenance-free, these doors are designed to
last.
• Panels won’t dent, crack, split or warp.
• Energy-efficient polyurethane core.
• Laminated veneer lumber stiles for even greater
strength.
• Non-Textured Fiberglass Door facing provides
superior impact resistance.
• Solid blocking in lock area for greater security.
• High definition panel profile.
• Composite bottom rail prevents water damage.
Wood
Standard prime frame members shall be select finger
jointed softwood pine treated with repellant preservative
in accordance with WDMA IS 4-94. Exterior frame
members shall be painted with a water based primer.
W OOD D OOR P ANELS
Bring nature home; these doors add a timeless beauty
that will never go out of style.
• 1-3/4” thick door panels keeps weather where it
should…outside.
• Carefully selected premium quality White Pine wood
for beauty.
• Constructed with a combination of veneered and
solid wood parts to produce a strong, straight door.
• Assembled using hardwood dowels for extra
strength.
• Sanded to a satin smooth finish to allow application
of any finish you desire.
H INGES
Hinges are available in Standard Brass Plated other
options available are Antique Nickel, Brushed Chrome
and Oil Rubbed Bronze on in-swing doors. Outswing
doors are only available with Stainless Steel hinges with
a non-removable pin.
Clad
Optional Clad frame members shall be select finger
jointed softwood pine treated with repellant preservative in
accordance with WDMA IS 4-94. Exterior frame members
shall be extruded aluminum clad up to .080 in thickness,
sealed at the corners and fastened with a lexan corner key
system and stainless steel screws. Standard colors are
White, Cream, Sand, Green, and Bronze.
White
Cream
Sand
Green
Bronze
Printing limitations make accurate color duplication impossible.
For exact color matching, please refer to actual color samples at your Monarch dealer.
E XTERIOR T RIM
On standard wood frames Wood Brickmould is standard,
additional options are Williamsburg Brickmould,
1 x 4, 1 x 6, 5/4 x 4, 1 x 4BB, 1 x 6BB, 5/4 x 4BB,
PVC BM, PVC 1 x 4, PVC 1 x 6, PVC 5/4 x 4, and
PVC 1 x 4BB. All wood trim is factory primed ready for the
finish painting. On optional Clad Frames, no trim is
standard or upgrade to Clad Brickmould.
S CREENS
Screen sill tracks are standard on all multipanel door
systems with standard sills. Note screens are available on
2 and 3 panel French, applications only with a clad frame
which requires an extension kit to house the second
screen. Screens are not available on French doors with a
primed frame. This kit provides sufficient depth to allow for
either a 4-9/16" or 6-9/16" installation. All units are
available with the optional Clad Brickmould system with a
clad frame. Note that combining Clad Brickmould with a
French Screen Kit locks the unit into a 6-9/16" wall
installation.
FIBERGLASS
DOOR
PANELS
Virtually maintenance-free, these doors are designed to
last.
• Panels won’t dent, crack, split or warp.
• Energy-efficient polyurethane core.
• Laminated veneer lumber stiles for even greater
strength.
• Non-Textured Fiberglass Door facing provides
superior impact resistance.
• Solid blocking in lock area for greater security.
• High definition panel profile.
• Composite bottom rail prevents water damage.
WOOD
DOOR
PANELS
Bring nature home; these doors add a timeless beauty
that will never go out of style.
• 1-3/4” thick door panels keeps weather where it
should…outside.
• Carefully selected premium quality White Pine wood
for beauty.
• Constructed with a combination of veneered and
solid wood parts to produce a strong, straight door.
• Assembled using hardwood dowels for extra
strength.
• Sanded to a satin smooth finish to allow application
of any finish you desire.
HINGES
Hinges are available in Standard Brass Plated other
options available are Antique Nickel, Brushed Chrome
and Oil Rubbed Bronze on in-swing doors. Outswing
doors are only available with Stainless Steel hinges with
a non-removable pin.
FRAME
55
TYPE
Wood
Standard prime frame members shall be select finger
jointed softwood pine treated with repellant preservative
in accordance with WDMA IS 4-94. Exterior frame
members shall be painted with a water based primer.
Clad
Optional Clad frame members shall be select finger
jointed softwood pine treated with repellant preservative in
accordance with WDMA IS 4-94. Exterior frame members
shall be extruded aluminum clad up to .080 in thickness,
sealed at the corners and fastened with a lexan corner key
system and stainless steel screws. Standard colors are
White, Cream, Sand, Green, and Bronze.
White
Cream
Sand
Green
Bronze
Printing limitations make accurate color duplication impossible.
For exact color matching, please refer to actual color samples at your Monarch dealer.
EXTERIOR
TRIM
On standard wood frames Wood Brickmould is standard,
additional options are, 1 x 4, 1 x 6, 5/4 x 4, 1 x 4BB, 1 x
6BB, 5/4 x 4BB, PVC BM, PVC 1 x 4, PVC 1 x 6,
PVC 5/4 x 4, and PVC 1 x 4BB. All wood trim is factory
primed ready for the finish painting. On optional Clad
Frames, no trim is standard or upgrade to Clad
Brickmould.
SCREENS
Screen sill tracks are standard on all multipanel door
systems with standard sills. Note screens are available on
2 and 3 panel French, applications only with a clad frame
which requires an extension kit to house the second
screen. Screens are not available on French doors with a
primed frame. This kit provides sufficient depth to allow for
either a 4-9/16" or 6-9/16" installation. All units are
available with the optional Clad Brickmould system with a
clad frame. Note that combining Clad Brickmould with a
French Screen Kit locks the unit into a 6-9/16" wall
installation.
EXTERIOR
DOOR
Wood & Fiberglass Doors
EXTERIOR
DOORS
Exterior Doors
56
1/2 Lite
1 Panel
Sidelite
Full
View
Flush
Glazed
2/0 with
plastic insert
6/8 height
2/6, 2/8, 3/0
6/8 & 8/0
heights
Full Lite
Sidelite
FIBERGLASS
DOORS
Available in:
12”
6/8 height
12”
6/8 height
Sidelites
6 Panel
1/2 Lite
2 Panel
9 Lite
2 Panel
1/2 Circle
4 Panel
2/8, 3/0
6/8 height
2/8, 3/0
6/8 height
2/8, 3/0
6/8 height
3/0
6/8 height
FIBERGLASS
DOORS
Single Doors
Available in:
French Doors
W OOD
DOORS
Available in: 2/0, 2/6, 2/8, 3/0
6/8, 7/0, 8/0 height
3/0
6/8 height
2/8, 3/0
6/8 height
Terrace Doors
Triple
Terrace Doors
Quad
French Doors
Unit Details
Exterior Door
with Clad Frame
Vertical Section
Exterior Door
with Wood Frame
and Screen
Vertical Section
Exterior Door
Sash Transom
Vertical Section
Exterior Door
Sash Transom
Mull Section
57
WIDTH
10”
SL
12”
SL
14”
SL
2/0
Sgl
2/6
Sgl
2/8
Sgl
3/0
Sgl
Rough
Opening
12”
14”
16”
26”
32”
34”
38”
Outside
Frame
1
11 /2”
1
13 /2”
1
15 /2”
1
25 /2”
311/2”
1
33 /2”
371/2”
Outside
BM
14”
16”
18”
28”
34”
36”
40”
WIDTH
4/0
Twin
5/0
Twin
5/4
Twin
6/0
Twin
7/6
Triple
8/0
Triple
9/0
Triple
10/0
Quad
10/8
Quad
12/0
Quad
Rough
Opening
51”
63”
67”
75”
94”
100”
112”
125”
133”
149”
Outside
Frame
501/2”
621/2”
661/2”
741/2”
931/2”
991/2”
1111/2”
1241/2”
1321/2”
1481/2”
Outside
BM
53”
65”
69”
77”
96”
102”
114”
127”
135”
151”
6/8
Std
OUTSWING
HEIGHT
10”-3/0-10” 1/0-3/0-1/0 1/2-3/0-1/2
Combo
Combo
Combo
WIDTH
7/0
8/0
6/8
Std
INSWING
HEIGHT
7/0
8/0
Rough
Opening
60”
64”
68”
Rough
Opening
8111/16” 8511/16” 9711/16”
Rough
Opening
825/8” 865/8” 985/8”
Outside
Frame
591/2”
631/2”
671/2”
Outside
Frame
813/16” 853/16” 973/16”
Outside
Frame
821/8” 861/8” 981/8”
62”
66”
70”
Outside
Brickmould
823/4”
Outside
Brickmould
827/16” 867/16” 987/16”
Outside
Brickmould
873/4” 993/4”
*Handicap Sill will reduce In-Swing height by 1-1/2”
and Out-Swing height by 9/16”
Transoms
transoms for wood and fiberglass patio doors
CLAD/WOOD DIRECT SET TRANSOMS
WIDTH
Unit
Rough
Opening
Cont
Glass
Comb
Glass
2/6
Sgl
2/8
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
7/6
8/0
9/0
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2” 931/2”
32”
34”
38”
51”
63”
67”
75”
991/2” 1111/2”
94”
100”
112”
293/4” 313/4” 353/4” 483/4” 603/4” 643/4” 723/4” 913/4”
973/4” 1093/4”
293/4” 313/4” 353/4” 231/2” 291/2” 311/2” 351/2” 293/8”
313/8”
HEIGHT
1/0
1/4
2/0
Unit
131/2”
171/2”
251/2”
Rough
Opening
14”
18”
26”
Glass
113/4”
153/4”
233/4”
HEIGHT
1/0
1/4
2/0
Unit
131/2”
171/2”
251/2”
353/8”
horizontal bars.
horizontal bars.
CLAD/WOOD SASH TRANSOMS
WIDTH
Unit
Rough
Opening
Cont
Glass
Comb
Glass
2/6
Sgl
2/8
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
7/6
8/0
9/0
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2” 931/2”
991/2” 1111/2”
32”
34”
38”
51”
63”
67”
75”
94”
100”
112”
Rough
Opening
14”
18”
26”
27”
29”
33”
46”
58”
62”
70”
N/A
N/A
N/A
Glass
9”
13”
21”
27”
29”
33”
21”
27”
29”
33”
27”
29”
33”
Cont. = Continuous Transom Unit. This single transom is designed to expand across multiple Doors.
Comb. = Combination Transom Unit. These multiple transoms are designed to line up with multiple doors.
See pictures below.
Combination
Options
Monarch Clad French
Door with wide-stile
Continuous Transom
and Prairie Grilles.
Monarch Clad
Terrace Door with
Continuous Direct Set
Transom and
Standard Colonial
Grille.
Note: Grilles in transom
do not line up.
Note: Transom stiles
match stiles on doors below.
Monarch Clad Triple
Terrace Door with
wide-stile Composite
Transoms (no grille).
Note: Transom stiles match
stiles on doors below.
EXTERIOR
DOORS
Exterior Doors
EXTERIOR
DOORS
58
Transoms
clad direct set transoms for wood and fiberglass patio doors
C LAD / W OOD DIRECT SET
CIRCLE TOP TRANSOMS
WIDTH
Clad Direct Set
Circle Top
Transoms
Unit
2/6
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
Twin
6/0
Twin
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
Rough
32”
Opening
Glass
2/8
Sgl
34”
38”
51”
63”
67”
75”
27 /4” 293/4” 333/4” 453/4” 573/4” 613/4” 693/4”
3
HEIGHT
Unit
2/6
Sgl
2/8
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
Twin Twin
153/4” 163/4” 183/4” 251/4” 311/4” 331/4” 371/4”
Rough
161/4” 171/4” 191/4” 253/4” 313/4” 333/4” 373/4”
Opening
Glass
13”
14”
16”
22”
28”
30”
34”
C LAD / W OOD DIRECT SET
ELLIPTICAL TRANSOMS
WIDTH
Clad Direct Set
Elliptical
Transoms
Unit
2/6
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
Twin Twin
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
Rough
32”
Opening
Glass
2/8
Sgl
34”
38”
51”
63”
67”
75”
295/8” 315/8” 355/8” 485/8” 605/8” 645/8” 725/8”
HEIGHT
Unit
2/6
Sgl
2/8
Sgl
3/0
4/0
5/0
5/4
Sgl Twin Twin Twin
131/2” 133/4” 161/2”
Rough
14”
Opening
141/4”
Glass
113/4”
12”
HEIGHT
2/6
Sgl
2/8
Sgl
17”
16”
6/0
Twin
Clad Direct Set
Eyebrow
Transoms
WIDTH
Unit
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
Rough
32”
Opening
Glass
2/8
Sgl
34”
275/8” 30”
3/0
Sgl
4/0
Twin
38”
51”
347/8”
46”
5/0
5/4
Twin Twin
63”
67”
6/0
Twin
161/2” 193/4”
18”
19”
143/4” 141/4” 171/2” 153/4” 163/4”
75”
593/8” 631/8” 703/4”
Unit
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
Twin Twin
515/16” 75/16” 119/32” 819/32” 163/8”
16”
1531/32”
C LAD / W OOD D IRECT SET
SEGMENT TRANSOMS
WIDTH
Clad Direct Set
Segment
Transoms
Unit
Rough
Opening
Glass
2/6
Sgl
2/8
Sgl
3/0
4/0
5/0
Sgl Twin Twin
5/4
6/0
Twin Twin
311/2” 331/2” 371/2” 501/2” 621/2” 661/2” 741/2”
32”
34”
38”
51”
63”
67”
75”
293/4” 313/4” 353/4” 483/4” 603/4” 643/4” 723/4”
HEIGHT
Unit
2/6
Sgl
2/8
Sgl
3/0
Sgl
4/0
5/0
Twin Twin
5/4
6/0
Twin Twin
165/8” 171/8” 167/8” 183/4” 221/8” 231/2” 231/8”
Rough 171/8”
175/8” 173/8” 191/4” 225/8”
Opening
Glass
#6 - 19 Lite
Optional
Open Hub for
Double Doors,
except 4/0.
#1 - 5 Lite
Standard
Open Hub
for Single
& 4/0
Double
Doors.
147/8” 153/8”
15”
17”
#4 - 9 Lite
Optional
Open Hub for
Sidelite Units
& 4/0 Double
Doors.
#9 - Cathedral
#2 - 7 Lite
Standard Open
Hub for
Double Doors
& Sidelite
Units,
except 4/0.
#4 - 13 Lite
Optional Open
Hub for Double
Doors &
Sidelite Units,
except 4/0.
#1 - 5 Lite
Standard
Open Hub for
Single & 4/0
Double Doors.
711/16” 91/16” 131/32” 1011/32” 181/8” 173/4” 1723/32”
Rough
83/16” 99/16” 1317/32” 1027/32” 185/8” 181/4” 187/32”
Opening
Glass
#2 - 7 Lite
Standard
Open Hub for
Double Doors
& Sidelite
Units,
except 4/0.
#3 - 9 Lite
Optional Open
Hub for 4/0
Double Doors.
191/4” 171/2” 181/2”
C LAD / WOOD D IRECT SET
EYEBROW TRANSOMS
2/6
Sgl
#1 - 5 Lite
Standard Open
Hup for Single
& 4/0 Double
Doors.
24”
235/8”
203/8” 215/8” 211/4”
#2 - 7 Lite
Standard
Open Hub for
Double Doors
& Sidelite
Units,
except 4/0.
#4 - 13 Lite
Optional Open
Hub for Double
Doors & Sidelite
Units, except 4/0.
#1 - 5 Lite
Standard
Open Hub for
Single & 4/0
Double Doors.
#9 - Cathedral
#9 - Cathedral
#2 - 7 Lite
Standard Open
Hub for
Double Doors
& Sidelite
Units,
except 4/0.
#4 - 13 Lite
Optional Open
Hub for Double
Doors & Sidelite
Units, except 4/0.
#3 - 9 Lite
Optional
Open Hub for
4/0 Double
Doors.
#3 - 9 Lite
Optional
Open Hub for
4/0 Double
Doors.
#9 - Cathedral
Short Leg - 13” outside frame
Available special
quote
Combination
Options
Monarch Clad
French Door with
Circle Top Transom
and optional intricate
bar grille.
Monarch Clad
Terrace Door with
Elliptical Transom
and standard grille
above the unit.
Monarch Clad Terrace
Door with Segment
Transom and standard
grille above the unit.
A Woodgrain Millwork Company
P.O. Box 249 • 1608 Frank Akers Road
Anniston, Alabama 36202
Sales: (800) 633-2323 • Fax: (800) 261-6116
www.monarchwindows.com
July - 2011

Rough Openings Guide - Monarch Windows and Doors

Transcription

Similar documents

Select 500 Vinyl Clad Wood Windows