Select 500 Vinyl Clad Wood Windows
Transcription
Select 500 Vinyl Clad Wood Windows
Crestline ® Select 500™ V I N Y L c l a d w o o d Win d o w s & pa t i o d o o r s Table of Contents Why Crestline.......................................3 Performance Glass..............................4 Options..............................................5-6 Double Hung Windows.......................7 Gliding Windows..................................8 Casement/Awning Windows..............9 Specialty Shaped Windows..............10 Sliding Patio Doors.............................11 Hinged Patio Doors...........................12 Warranty............................................13 ch o ic e s 2 C r e s t l i n e S e l e c t 5 0 0 V i n y l C l a d W i n d o w s & Pa t i o D o o r s Why Crestline® Select 500 ? ™ They're built to last without any hassle. The low-maintenance exterior never needs to be painted, and it will never rot, dent, ding, or chip. With our fusion-welded corners, water doesn't have a way to get in. Enduring quality... We guarantee it. We believe the Select 500™ Series of products are some of the best in the industry, and to prove it, Crestline has written one of the most comprehensive warranties in the business. With a limited lifetime warranty on glass and vinyl, and our 30 Year Wood Warranty, the Select 500™ Series will look beautiful and perform as expected long into the future. Additionally, the warranty is transferable, helping maintain the value of your home and property. Built-in Water Management Systems Fusion-welded Frames and Sash OT H ER PROD U CTS I N T H E CREST L I N E F A M I L Y : 3 Save Energy With the majority of a window being made up of glass, picking the right glass is crucial. Crestline offers a wide range of glass to meet the performance that is right for you. STANDARD LOW E2 ZO-E-SHIELD 5 ZO-E-SHIELD 5 EXTREME Casement Total Unit Performance NFRC Label ratings U-Value* We know our Select 500 Series windows and patio doors are energy efficient. But don’t take our word for it. All Crestline products are rated, certified and labeled for U-Value, Solar Heat Gain, Visible Transmittance, Air Leakage and Condensation Resistance by the National Fenestration Rating Council (NFRC). By using the information on the label, products can easily be compared within the product line or against competitors. 0.27 0.26 0.23 0.20 0.19 0.46 0.42 95% 95% Solar Heat Gain Coefficient* 0.30 Visible Light Transmittance* 0.52 Ultraviolet Rays Blocked 85% *Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Values include Argon gas. Real Warm-Edge® Spacer System Crestline’s Real Warm-Edge® spacer has no metal to transfer temperatures. This improves the efficiency of the glass and reduces condensation and frost build-up. Standard on all Crestline insulated glass. METAL SPACER 4 REAL WARM EDGE C r e s t l i n e S e l e c t 5 0 0 V i n y l C l a d W i n d o w s & Pa t i o D o o r s POSSIBILITIES The possibilities are endless with the multitude of high-quality options and accessories available with the Select 500 product line. With more hardware finishes, interior options and exterior colors, your windows can easily match or coordinate your architectural design without compromising the budget. Get ready to be inspired. Double Hung / SLIDER casement / AWNING Tilt Latches Sash Lock Casement Nested Handle Sequential Lock Lever Hardware Finishes WINDOW hardware FINISHES HINGED DOOR hardware FINISHES White Brushed Nickel Bright Brass PVD Antique Brass Almond Rustic Bronze Brushed Nickel Polished Chrome (MULTI-POINT) Black Oil-Rubbed Bronze White Rustic Bronze (Sliding Patio Door Only) (Sliding Patio Door Only) Finish options shown may not be accurate representations. Actual color samples are available upon request. hinged patio DEADBOLT AND PASSAGE SET sliding patio HINGED patio MULTI-POINT LOCKSET Arched Plate Square Plate 5 Imagine... Grille Options Simulated Divided Lite* 7/8" SDL Vinyl Exterior Bar SDL Wood Interior Bar *Shown with optional Grille Between the Glass. Grille between the glass 3/4" Profiled Single-Toned or Two-Toned GIA Removable Wood Grille 5/8" Flat Grilles in Airspace 7/8" Wood Interior Perimeter Bar Interior Options Exterior Options SOLID WOOD standard FINISHES* DELUXE STAIN & SEAL FACTORY FINISHES* Unfinished Pine Clear Satin Golden Oak Fruitwood White Ivory Chestnut White Latex Primed Almond Desert Tan Terra Bronze * Finish options shown may not be accurate representations. Actual color samples are available upon request. Exterior Trim Options Brickmould with Sillnose and J-Channel J-Channel Renovation Brickmould 6 6 C r e s t l i n e S e l e c t 5 0 0 V i n y l C l a d W i n d o w s & Pa t i o D o o r s Maintenance-free innovations with built-in energy savings Airspace provides insulating power from summer heat and winter cold. Adding safe, colorless argon gas to the airspace increases the window unit’s energy efficiency. Low E2 Coatings comes standard to help to filter UV rays to protect furnishings from fading while also insulating the home in winter and summer extremes. The Unique Warm Edge Spacer insulates the edge of the glass better to improve thermal performance and reduce condensation. In fact, this spacer improves thermal performance so well that your window will be more comfortable to sit next to during the winter and summer. Multi-Chambered Frame and Sash improves structural and thermal performance by minimizing expansion and contraction due to seasonal changes or differences in outside and inside temperatures. EASY TO OPEN BEAUTY WITHIN Utilizing a coil spring technology, the Symmetry Balance System® takes all the work out of lifting the sash by eliminating the need for tension or balance adjustments. The result? A window that opens quietly, smoothly and with very little effort. The innovative Symmetry Balance System® is hidden from view with a concealed vinyl or optional wood jamb liner. With no fuzzy weather stripping in sight, the concealed jamb liner offers clean architectural sightlines and is color matched to the unit; beautiful both inside and out. Concealed Vinyl Jambliner ( Standard ) Concealed Wood Jambliner ( Optional ) The Concealed Jambliner is a unique design feature offered as part of the Symmetry Balance System®. There is no visible weather stripping and the vinyl or optional wood jambliner that is color matched to the double hung window unit, hides the ultra quiet, super smooth coil balance system. Double hung Windows 7 Magnificent views deserve perfect frames. Scenic expanses deserve the wide views available with the Crestline Select 500 Series slider window. Because of its horizontal shape, the slider window is the perfect architectural solution to broad vistas or landscapes. And, with a touch of your finger, the window glides open allowing fresh air to fill the room. BRAINS AND BEAUTY All-metal locks securely fasten the window together ensuring protection from the outside and the elements. The durable material and contemporary design compliment the style of any home. With flush mounted locks that tilt the sash in, the Select 500 Series sliding window can be easily removed for cleaning. SLIDING WITH EASE All of your senses will come alive when the Select 500 slider window brings the outdoors in with a touch of your fingers. The bottom of the unit glides along the vinyl track ensuring a smooth and enduring movement for years to come. DOUBLE gliding Windows 8 C r e s t l i n e S e l e c t 5 0 0 V i n y l C l a d W i n d o w s & Pa t i o D o o r s What Makes It the Best Frame? Superior Innovation Is Built Right In. TriCore™ Frame Technology Includes: Extruded Exterior Cladding Low-maintenance solid color extruded vinyl. Available in five colors to compliment any home. Multi-Chambered Sub-Frame Completely impervious to moisture. Acts as a thermal barrier for heat and cold. Extruded Nailing Fins Integral to the TriCore™ frame and fully welded in the corners creating ideal conditions for a perfect installation. Solid Wood Interiors Available in a variety of finishes to match a home’s decor. 3 1 FUNCTIONAL BEAUTY BEAUTY AND BRAWN Our all metal Nested Crank handle makes for a more sleek and durable operating system. The crank folds neatly away from window coverings and has a matching cover that can easily be removed and replaced when painting or staining. The sleek multi-point lock secures the sash at multiple points with a single lever; providing not only a tight seal from the outside elements, but greater security. The slim design accomplishes all of this without interrupting the wood interior with clunky, obvious hardware. 4 2 Casement/awning Windows 9 The shape of my window? Beautiful. Create a shape If you can imagine it, we can build it. After all, no one should put limits on your creativity. Contemporary direct-set frame allows more natural daylight. Heavy solid wood interiors are ready for staining, painting, and are also available factory finished. Rigid Nailing Fin is integral to the frame creating a barrier between elements and your home. True custom windows Individually crafted to fit your unique design and dimensions. The results? A one-of-a-kind window you won’t find in any other home. HalfHalf Round Half Round Circle Modified Half Circle Modified Half Round w/Extended Half Round Legs Quarter Round Quarter Quarter Round Circle Modified Quarter Modified Quarter Round Circle Quarter w/ Round Extended Legs Eyebrow Eyebrow Eyebrow Trapezoid Trapezoid Trapezoid Quarter Eyebrow Quarter Quarter Eyebrow Eyebrow Pentoid Pentagon Pentoid Triangle Right Triangle Triangle Octagon Octagon Octagon Rectangle Rectangle Rectangle Specialty Shaped Windows 10 C r e s t l i n e S e l e c t 5 0 0 V i n y l C l a d W i n d o w s & Pa t i o D o o r s Consistently smooth and aesthetically appealing. Outdoor living adds greater space and enjoyment to any home. Connect your balcony, deck, patio or backyard to your indoors with spacesaving Select 500 Series sliding patio doors. These units provide the indoors with expansive and uninterrupted views. And, by adding more natural light and fresh air, sliding patio doors can enlighten any room. Opening that door to another living space just got smoother and easier with Select 500 Series sliding patio doors. strength and security Interlocking door panels offer an extra measure of security while also reducing infiltration of air and water. Door stiles are made with a structural, Laminated Veneer Lumber (LVL) core for added strength. SMOOTH OPERATOR MAINTENANCE FREE SILL SAFE AND SECURE The weather resistant sill system is made from nonwood materials that will never rot. An integrated weep system channels water away from your home. To help keep your home guarded, a heavy duty lock of dichromate or stainless steel secures the panel to the frame at two points. For added protection, a three-point lock is available with a handle upgrade. When your arms are full, it is sometimes easier to use your elbow to push the door open. With large 1-1/2" dual tandem rollers on the bottom of each panel, the Select 500 Series sliding patio door glides open with ease…whether you use your elbow, foot, hand or fingers. Sliding Pat io Doors 11 The door to inspiration opens here. French operating patio doors add graceful style to any home while flooding the space with natural light. The Select 500 Series hinged patio doors blend traditional styling with modern energy efficiency to create open and inviting areas of living space. With multiple heights and widths, let your imagination grow to new elevations. STYLISHLY STRONG Constructed of superior corrosion resistant steel; the high-performance locking mechanism secures the door at three points. An “anti-slam” feature prevents damage by keeping the lock bolts from extending until the door is in the closed position. STRONGER IS BETTER For exceptional strength, durability and weather resistance, each door panel is constructed of Laminated Veneer Lumber (LVL) stiles. Stronger panels mean greater design flexibility, bigger sizes and higher performance ratings. Stronger IS Better. HANDLED WITH EASE Three-point locking hardware holds the door firmly in place with 8mm shoot bolts that secure the active panels at the top, middle and bottom. The 4" adjustable hinges ensure precise door adjustment and smooth door operation. Together with the corrosion-resistant stainless steel hardware components, these features ensure trouble-free operation for years into the future. Hinged EFFICIENT ELEGANCE The composite threshold on the Select 500 hinged patio doors prevents the side jambs from soaking up moisture that leads to rotting. The vinyl bottom door sweep has a built-in water diverter for water drainage. While efficient, the matte bronze finish gives the final touch of elegance to any home. Pat io doors 12 C r e s t l i n e S e l e c t 5 0 0 V i n y l C l a d W i n d o w s & Pa t i o D o o r s Crestline’s Lifetime Limited Warranty Effective date August 1, 2014. Subject to the conditions, exclusions and limitations that follow, the manufacturer of CRESTLINE products, (“CRESTLINE”) warrants CRESTLINE products (Select 500™, Acclaim™, Elite Premium Clad, Elite Premium Primed, Select 500™ Replacement, and Elite Premium Replacement Windows and Doors) to be free from defects in material and workmanship as noted below. All referenced times are in relation to date of purchase. Innovations: Wood Shield™, Symmetry Balance System™, TriCore™ Frame Technology, EasyCare®, Zo-e-shield® WARRANTY COVERAGE Insulated Glass Hermetic Seal – Lifetime CRESTLINE warrants the insulated glass, if any, against failure of the hermetic seal. During the first twenty (20) years after the date of purchase, CRESTLINE’s obligations under this warranty shall be limited to, at its option, repair or replacement of the insulated glass only (FOB the original point of delivery), or refund of the original purchase price of the insulated glass. After twenty (20) years from the date of purchase, CRESTLINE’s obligations under this warranty shall be limited to granting a prorated credit against the then current list price of comparable new replacement insulated glass. Such credit shall be computed on the basis of the number of years from the date of purchase as follows: Years from Date of Purchase Amount of Credit 0 to 20..................................................100% 21 to lifetime.......................................10% Vinyl Clad Products - Lifetime CRESTLINE warrants its vinyl exterior cladding, to be free from defects in material and workmanship and to not rot, rust, crack, pit, corrode, peel, blister or flake. For any products or parts determined by CRESTLINE to contain defects in material or workmanship, CRESTLINE will, at its option, repair the product or parts at no charge, or provide replacements at no charge, or refund the original purchase price of the product or part containing the defect. Decisions as to whether to repair, replace, or refund shall be made by CRESTLINE, in its sole discretion. Window and Patio Door Product – Twenty Years CRESTLINE warrants that its products and insulated glass shall be free from defects in material or workmanship for a period of TWENTY (20) YEARS unless specified below. Should any CRESTLINE products or components of products be determined by CRESTLINE to contain defects in material or workmanship within the applicable warranty period, CRESTLINE will, at its option, repair the products or components at no charge, or provide replacement products or components at no charge, or refund the original purchase price of the products containing the defective components. Decisions as to whether to repair, replace or refund shall be made by CRESTLINE in its sole discretion. Replacements will be the closes equivalent current product and may not exactly match the original. Replacements will be delivered to the original point of purchase with no shipping charges. If shipment direct to the consumer is requested, normal shipping and handling charges will apply. Wood Rot - Wood Shield Clad Wood Products – Thirty Years Maintained primed /unprimed (unclad) wood products finished pursuant to installation instructions shall be warranted against wood rot for a period of TEN (10) years. Mildew and other discoloration due to condensation is not considered rot and not covered. Products in contact with the ground are not warranted against wood rot. Laminated Glass – Five Years Laminated glass shall be free from defects in material and workmanship for a period of FIVE (5) years. Decorative Glass – Five Years Decorative glass shall be free from defects in material and workmanship for a period of FIVE (5) years. Factory-Applied Interior Finishes – Five Years Factory-applied interior finish or stain is warranted against peeling, checking, or cracking for FIVE (5) years. Standard factory-applied primer is not a finish coat. Hardware Finish – Ten Years Corrosive-resistant finishes and seacoast hardware packages installed within one mile of a corrosive environment shall be warranted for TEN (10) years unless marred or scratched. The above conditions/ exclusions apply. Glass Stress Cracks – One Year Glass shall be warranted against stress cracks for ONE (1) year. Transferability – Ten Years This warranty is transferable to subsequent owners. This transferred warranty is the lesser of TEN (10) years or the period specified from the date of manufacture. NON COVERAGE • Normal wear and tear, weathering and natural variations in wood color or texture are considered normal and not a product defect. • Normal wear and tear of hardware and hardware finishes that can naturally occur (e.g. corrosion, tarnishing) or damage at construction site. • Products not installed pursuant to our installation instructions attached to each unit. • Minor scratches, slight glass curvature or glass imperfections are natural variances in glazing and do not impair structural integrity or significantly obscure normal vision. • Repairs, refinishing or similar activities involved when skilled labor installs or replaces products. • Condensation and any related water damage (such as mold or wood rot due to water or ice build up), which occur as a result of humidity within the property or changes in the interior/exterior temperatures, do not indicate a defect. Contact a heating/cooling specialist to assist. • Products installed in a non-vertical position, discoloration of non-visible parts, or failures or operating difficulties due to accident, acts of God, abuse, misuse, alteration, exposure to the elements, improper or insufficient handling, storage, maintenance or service including, but not limited to, obstruction of weep holes. Installation of units must be finished and operated in accordance with our installation instructions attached to each unit. • Failures or operating difficulties resulting from use of high-expansion foam insulation, incompatible sealant, cleaning agent, or exposure to corrosive, unusual, harmful or aggressive substances, acid rain, fumes or condensates, subjection to abnormal stress from localized application of heat, excessive vibration or movement of buildings or foundations or to other abnormal physical stress or use in high humidity areas. • Products installed in buildings with cladding systems that do not allow for proper management/ drainage of moisture (e.g. EIFS or synthetic stucco without an engineered drainage system). • Vinyl parts or weather strip that has non-factory-applied paint or stain voids the warranty of the affected unit. • Warpage or air/water infiltration on any swing door with a call-out height of greater than 6’10” unless CRESTLINE’S multi-point lock system is used with the door. • Any installations at an altitude over 3,500 feet above sea level unless capillary tubes have been installed or a HIGH ALTITUDE GLASS PACKAGE is used, which provides limited coverage. • Insulated True Divided Lite units. • Products with wood surfaces that are not covered within thirty (30) days after purchase with a highquality top coat of paint, sealer or varnish. The top coat should be applied as recommended by the paint manufacturer and it is the customer’s responsibility to properly care for and protect the woodwork against moisture or excessive dryness. • Products with factory-applied primer paint that are not covered with a finish coat within six (6) months of unit installation. • Products or components not provided by CRESTLINE including but not limited to hardware locksets, strikes, or panning systems. • CRESTLINE products that are stacked or mulled with products manufactured by others. • Products with modifications (e.g. customer applied paint finishes, tints, films) or security systems without prior approval. ADDITIONALLY • Insulated units with capillary tubes will not have inert gas fill. • ADA-compliant sills or telescoping, pocket and bifold patio door systems are not designed nor are they intended to manage moisture or water infiltration. The determination of proper building design and moisture management (through an overhang or otherwise) is the responsibility of your building designer, architect or contractor. • Warping of a door shall not be deemed to be a product defect unless the warping is in the door panel itself and then only if the warping is more than one quarter inch. The amount of warp shall be determined by placing a taut wire or string or straightedge across the face of the installed door panel thought to be concave and measuring the amount of warp at the point of the greatest distance between the bottom of such wire, string or straightedge and the face of the door panel. CRESTLINE may, at its option, defer action on a warping claim for a period of not more than ONE (1) year from the date of the claim to permit the door panel to adjust to temperature and humidity in its installed position. • The performance of windows and doors may be affected by factors beyond CRESTLINE’S control. Examples include handling and installation, construction details of the building, exposure conditions, maintenance, normal wear and tear, and migration of inert gas. Structural or thermal ratings are for comparison purposes only. While CRESTLINE products are manufactured to meet or exceed published ratings, it is not possible to guarantee that they will meet or exceed those ratings after they have been installed. • CRESTLINE is not responsible for removing any defective products from the structure in which they are installed, or for installing any replacement products or components provided by CRESTLINE pursuant to this limited warranty, or for any painting, refinishing or other work necessary to complete the installation of replacement products or components, all of which shall be the consumer’s responsibility. GENERAL PROVISIONS Selection and purchase of CRESTLINE products which conform to all applicable building codes and local ordinances is the sole responsibility of the architect, building contractor or homeowner. CRESTLINE assumes no responsibility for compliance with local building codes or ordinances, or for calculation and design of support mullions, structural support, or flashing required for installation. Consult with your local building code officials and/or a qualified contractor, architect or engineer for specific requirements. THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT AS SET FORTH HEREIN. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE PERIODS OF COVERAGE OF THE EXPRESS WARRANTIES SET FORTH IN THIS LIMITED WARRANTY. CRESTLINE SHALL NOT BE LIABLE FOR APPLICABLE TAXES OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, DAMAGE OR LOSS TO PERSONS OR OTHER PROPERTY. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TO GET ASSISTANCE For further information, or to make a claim under The CRESTLINE Limited Lifetime Warranty, please contact the contractor who installed the product or the CRESTLINE retailer from whom the product was purchased or fill out an online service form. To find your closest retailer, please use the dealer locator on the web site (www.Crestlinewindows.com). Online service form: www.Crestlinewindows.com If you cannot find a local retailer, you may contact us at the below location. CRESTLINE WINDOWS AND DOORS P.O. Box 309 Medford, WI 54451 800-826-5509 Please provide the following information: a. Your name, address, daytime telephone number and e-mail address. b. A description of the product for which the claim is being made. c. Original proof of purchase (or approximate date if exact date is not known). d. The name of the CRESTLINE retailer from whom the product was purchased (if known). e. The nature of the product complaint. f. The coded information on the spacer between the panes of glass. In cases relating to hardware, the customer may be invoiced for the replacement hardware at the list price and appropriate credit will be issued when the defective hardware has been returned to CRESTLINE. Supplying replacement products or parts shall not extend the time period of the warranty and the replacement product or part shall be warranted only to the extent of the unexpired portion of the warranty period on the originally purchased product or part. NO DISTRIBUTOR, SALESPERSON, DEALER, RETAILER OR OTHER REPRESENTATIVE OF CRESTLINE PRODUCTS HAS THE AUTHORITY TO ALTER OR CHANGE THESE WARRANTIES OR TO MAKE ANY OTHER WARRANTY EITHER ORALLY OR IN WRITING. Effective Date: August 1, 2014 13 Technical Specifications Double Hung Windows..................................................15 Casement Windows......................................................24 Awning Windows............................................................31 Slider Windows................................................................35 Special Shapes...............................................................39 Hinged Patio Doors........................................................41 Sliding Patio Doors.........................................................49 14 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Double Hung Window Elevations double Hung C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 15 Double Hung Double Hung Window Elevations 16 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Double Hung Picture Window Elevations double Hung C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 17 1'-5 1/2" 1'-11 1/2" 2'-5 1/2" 1'-6" 2'-0" 2'-6" Soft Metric R.O. (mm) 457 610 762 14 3/4" 20 3/4" 26 3/4" Glass Size 1'-11 1/2" 1'-7 1/2" 1'-5 1/2" 2'-0" 1'-8" 1'-6" 610 508 457 20 3/4" 16 3/4" 14 3/4" Unit Dimension Rough Opening 2'-7 1/2" 2'-8" 813 28 3/4" 2'-9 1/2" 2'-10" 864 30 3/4" 2'-11 1/2" 3'-0" 914 32 3/4" 3'-1 1/2" 3'-2" 965 34 3/4" 3'-5 1/2" 3'-6" 1067 38 3/4" 3'-11 1/2" 4'-0" 1219 44 3/4" 1616 2016 2616 2816 21016 3016 3216 3616 4016 1618 2018 2618 2818 21018 3018 3218 3616 4018 1620 2020 2620 2820 21020 3020 3220 3620 4020 1626 2026 2626 2826 21026 3026 3226 3626 4026 1630 2030 2630 2830 21030 3030 3230 3630 4030 2'-11 1/2" 3'-0" 914 32 3/4" 2'-5 1/2" 2'-6" 762 26 3/4" Double Hung Double Hung Picture Window Elevations 4'-11 1/2" 5'-0" 1524 56 3/4" 5'-5 1/2" 5'-6" 1676 62 3/4" 5'-11 1/2" 6'-0" 1829 68 3/4" 4616 5016 5616 6016 4618 5018 5618 6018 4620 5020 5620 6020 4626 5026 5626 6026 4630 5030 5630 6030 2'-11 1/2" 3'-0" 914 32 3/4" 2'-5 1/2" 2'-6" 762 26 3/4" 1'-11 1/2" 1'-7 1/2" 1'-5 1/2" 2'-0" 1'-8" 1'-6" 610 508 457 20 3/4" 16 3/4" 14 3/4" 4'-5 1/2" Unit Dimension 4'-6" Rough Opening Soft Metric R.O. (mm) 1372 50 3/4" Glass Size 18 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Double Hung Specialty Shaped Window Elevations 2-4 L 2-6 3-0 2'-11 1/2" x 1'-5 3/4" 3'-0" x 1'-6 1/4" 914 x 457 3-2 5-0 5-6 6-0 4'-11 1/2" x 2'-5 3/4" 5'-0" x 2'-6 1/4" 1524 x 762 5'-5 1/2" x 2'-8 3/4" 5'-6" x 2'-9 1/4" 1676 x 845 5'-11 1/2" x 2'-11 3/4" 6'-0" x 3'-0 1/4" 1829 x 915 R L 3-0 2'-11 1/2" x 2'-11 1/2" 3'-0" x 3'-0" 914 x 914 3-2 3’-1 1/2” x 3’-1 1/2” 3’-2” x 3’-2” 965 x 965 L 2-8 R 2'-7 1/2" x 2'-7 1/2" 2'-8" x 2'-8" 813 x 813 C r e s t lin e S e l e c t L 2-10 R 2’9 1/2" x 2'-9 1/2" 2’-10” x 2’ 10” 864 x 864 5 0 0 V inyl Cl a d L Win d o w s 3-6 3'-1 1/2" x 1'-6 3/4" 3'-5 1/2" x 1'-8 3/4" 3'-2" x 1'-7 1/4" 3'-6" x 1'-9 1/4" 965 x 489 1067 x 534 4-6 R Unit Dimension 2'-5 1/2" x 2'-5 1/2" Rough Opening 2'-6" x 2'-6" Soft Metric R.O. (mm) 762 x 762 2-8 2'-7 1/2" x 1'-3 3/4" 2'-8" x 1'-4 1/4" 813 x 413 4'-5 1/2" x 2'-2 3/4" 4'-6" x 2'-3 1/4" 1372 x 692 4-0 Unit Dimension 3'-11 1/2" x 1'-11 3/4" Rough Opening 4'-0" x 2'-0 1/4" Soft Metric R.O. (mm) 1219 x 610 2-6 2’-3-1/2” x 1’1-3/4” 2'-5 1/2" x 1'-2 3/4" 2’-4” x 1’-2-1/4” 2'-6" x 1'-3 1/4" 711 x 362 762 x 381 R & double Hung 2-0 1’ 11-1/2” x 11-3/4” Unit Dimension 2’-0 x 1’-0-1/4” Rough Opening 610 x 311 Soft Metric R.O. (mm) L R 3-6 3'-5 1/2" x 3'-5 1/2" 3'-6" x 3'-6" 1067 x 1067 P a t i o D o o r s 19 Double Hung Double Hung Window Opening Specifications Height Sq. Ft. Daylight Opening Sq. Ft. Vent Top of Subfloor to Top of Sill Stopa Sq. Ft. Overall Unit Areab 13.625 13.625 13.625 13.625 13.625 13.625 13.625 13.625 13.625 13.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 31.090 31.435 31.435 1.992 2.435 2.878 3.320 3.468 3.763 4.206 4.648 5.091 5.534 1.239 1.522 1.806 2.090 2.185 2.374 2.658 2.942 2.974 2.974 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 4.31 5.04 5.77 6.50 6.74 7.23 7.96 8.69 9.42 10.15 1.784 2.193 2.602 3.011 3.147 3.419 3.828 4.237 4.284 4.063 19.625 19.625 19.625 19.625 19.625 19.625 19.625 19.625 19.625 19.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 31.090 31.435 29.810 3.117 3.810 4.503 5.195 5.426 5.888 6.581 7.273 7.966 8.659 1.784 2.193 2.602 3.011 3.147 3.419 3.828 4.237 4.284 4.063 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 5.79 6.77 7.75 8.73 9.06 9.71 10.69 11.67 12.65 13.63 2630 2636 2640 2646 2648 2650 2656 2660 2666 2670 2.329 2.863 3.397 3.931 4.109 4.465 4.999 5.533 5.305 5.305 25.625 25.625 25.625 25.625 25.625 25.625 25.625 25.625 25.625 25.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 31.090 29.810 29.810 4.242 5.185 6.128 7.070 7.385 8.013 8.956 9.898 10.841 11.784 2.329 2.863 3.397 3.931 4.109 4.465 4.999 5.533 5.305 5.305 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 7.27 8.50 9.73 10.96 11.37 12.19 13.42 14.65 15.88 17.11 2830 2836 2840 2846 2848 2850 2856 2860 2866 2870 2.511 3.087 3.662 4.238 4.430 4.813 5.389 5.719 5.719 5.719 27.625 27.625 27.625 27.625 27.625 27.625 27.625 27.625 27.625 27.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 29.810 29.810 29.810 4.617 5.643 6.669 7.695 8.037 8.721 9.747 10.773 11.799 12.826 2.511 3.087 3.662 4.238 4.430 4.813 5.389 5.719 5.719 5.719 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 7.77 9.08 10.39 11.70 12.14 13.02 14.33 15.64 16.95 18.27 21030 21036 21040 21046 21048 21050 21056 21060 21066 21070 2.693 3.310 3.927 4.545 4.750 5.162 5.779 6.133 6.133 6.133 29.625 29.625 29.625 29.625 29.625 29.625 29.625 29.625 29.625 29.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 29.810 29.810 29.810 4.992 6.102 7.211 8.320 8.690 9.430 10.539 11.648 12.758 13.867 2.693 3.310 3.927 4.545 4.750 5.162 5.779 6.133 6.133 6.133 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 8.26 9.65 11.05 12.45 12.91 13.84 15.24 16.63 18.03 19.43 Clear Opening Call Size Sq. Ft. Clear Opening Width 1630 1636 1640 1646 1648 1650 1656 1660 1666 1670 1.239 1.522 1.806 2.090 2.185 2.374 2.658 2.942 2.974 2.974 2030 2036 2040 2046 2048 2050 2056 2060 2066 2070 Shaded sizes meet or exceed egress opening requirements per 2006 IBC (International Building Code) minimum dimensions of 20" clear opening width, 24" clear opening height, 5.7 sq. ft. clear opening and floor to bottom of clear opening not to exceed 44". a Floor to bottom of clear opening dimensions are based on 82" header height. All units over 66 height are based off 106" header height for floor to clear opening dimension. b Sq. Ft. Overall Unit Area is calculated on the jamb dimension. 3050 (E) and 3149 (E) have a slightly modified sash portion to meet egress. Top sash glass is 17.50" taller than bottom. Sash stop must be removed to meet egress requirements. 20 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Double Hung Window Opening Specifications Sq. Ft. Vent Top of Subfloor to Top of Sill Stopa Sq. Ft. Overall Unit Areab 31.625 31.625 31.625 31.625 31.625 31.625 31.625 31.625 31.625 31.625 31.625 31.625 33.375 13.090 16.090 19.090 22.090 23.090 25.090 25.965 26.090 28.090 29.810 29.810 29.810 24.715 5.367 6.560 7.753 8.945 9.343 10.138 10.138 10.536 11.331 12.523 13.716 14.909 10.230 2.875 3.534 4.193 4.851 5.071 5.510 5.702 5.730 6.169 6.547 6.547 6.547 5.728 48.063 42.063 36.063 30.063 28.063 24.063 24.063 22.063 42.063 36.063 30.063 24.063 26.563 8.75 10.23 11.71 13.19 13.68 14.67 14.67 15.16 16.15 17.63 19.11 20.59 14.74 3.057 3.757 4.458 5.158 5.392 5.859 6.559 6.961 6.961 6.961 33.625 33.625 33.625 33.625 33.625 33.625 33.625 33.625 33.625 33.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 29.810 29.810 29.810 5.742 7.018 8.294 9.570 9.996 10.846 12.122 13.398 14.674 15.951 3.057 3.757 4.458 5.158 5.392 5.859 6.559 6.961 6.961 6.961 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 9.24 10.81 12.37 13.93 14.45 15.49 17.06 18.62 20.18 21.74 3630 3636 3640 3646 3648 3650 3656 3660 3666 3670 3.420 4.204 4.988 5.772 6.033 6.556 7.339 7.789 7.789 7.789 37.625 37.625 37.625 37.625 37.625 37.625 37.625 37.625 37.625 37.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 29.810 29.810 29.810 6.492 7.935 9.378 10.820 11.301 12.263 13.706 15.148 16.591 18.034 3.420 4.204 4.988 5.772 6.033 6.556 7.339 7.789 7.789 7.789 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 10.23 11.96 13.69 15.42 15.99 17.15 18.88 20.61 22.34 24.06 4030 4036 4040 4046 4048 4050 4056 4060 4066 4070 3.966 4.874 5.783 6.692 6.995 7.601 8.510 9.031 8.537 8.537 43.625 43.625 43.625 43.625 43.625 43.625 43.625 43.625 43.625 43.625 13.090 16.090 19.090 22.090 23.090 25.090 28.090 29.810 28.180 28.180 7.617 9.310 11.003 12.695 13.260 14.388 16.081 17.773 19.466 21.159 3.966 4.874 5.783 6.692 6.995 7.601 8.510 9.031 8.537 8.537 48.063 42.063 36.063 30.063 28.063 24.063 42.063 36.063 30.063 24.063 11.71 13.69 15.67 17.65 18.31 19.63 21.61 23.59 25.56 27.54 Sq. Ft. Clear Opening Width 3030 3036 3040 3046 3048 3050 3050 (E) 3052 3056 3060 3066 3070 3149 (E) 2.875 3.534 4.193 4.851 5.071 5.510 5.702 5.730 6.169 6.547 6.547 6.547 5.728 3230 3236 3240 3246 3248 3250 3256 3260 3266 3270 double Hung Height Sq. Ft. Daylight Opening Clear Opening Call Size Shaded sizes meet or exceed egress opening requirements per 2006 IBC (International Building Code) minimum dimensions of 20" clear opening width, 24" clear opening height, 5.7 sq. ft. clear opening and floor to bottom of clear opening not to exceed 44". a Floor to bottom of clear opening dimensions are based on 82" header height. All units over 66 height are based off 106" header height for floor to clear opening dimension. b Sq. Ft. Overall Unit Area is calculated on the jamb dimension. 3050 (E) and 3149 (E) have a slightly modified sash portion to meet egress. Top sash glass is 17.50" taller than bottom. Sash stop must be removed to meet egress requirements. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 21 Double Hung Double Hung Cross Sections 22 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Double Hung Cross Sections Weather Shield Double Hung Windows C r e s t lin e S e l e c t 5 0 0 CROSS SECTION DETAILS V inyl Cl a d Win d o w s & P a t i o D o o r s double Hung Aspire Series 23 casement Casement Window Elevations 24 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Casement Sash-Set Picture Window Elevations casement C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 25 casement Casement Transom Window Elevations Casement Specialty Shape Window Elevations 2-0 2-4 2-6 1’-11 1/2” x 11 3/4” 2’-3 1/2” x 1’-1 3/4” 2'-5 1/2" x 1'-2 3/4" Unit Dimension 2’-0” x 1-0 1/4” 2’-4” x 1’-2 1/4” 2'-6" x 1'-3 1/4" Rough Opening 660 x 362 610 x 311 762 x 381 Soft Metric R.O. (mm) 2-8 3-0 3-6 4-0 2'-7 1/2" x 1'-3 3/4" 2'-8" x 1'-4 1/4" 813 x 413 2'-11 1/2" x 1'-5 3/4" 3'-0" x 1'-6 1/4" 914 x 457 3'-5 1/2" x 1'-8 3/4" 3'-6" x 1'-9 1/4" 1067 x 534 3'-11 1/2" x 1'-11 3/4" 4'-0" x 2'-0 1/4" 1219 x 610 4-6 5-0 5-6 6-0 Unit Dimension Rough Opening Soft Metric R.O. (mm) 4'-5 1/2" x 2'-2 3/4" 4'-6" x 2'-3 1/4" 1372 x 692 4'-11 1/2" x 2'-5 3/4" 5'-0" x 2'-6 1/4" 1524 x 762 5'-5 1/2" x 2'-8 3/4" 5'-6" x 2'-9 1/4" 1676 x 845 5'-11 1/2" x 2'-11 3/4" 6'-0" x 3'-0 1/4" 1829 x 915 Unit Dimension Rough Opening Soft Metric R.O. (mm) 2'-5 1/2" x 2'-5 1/2" 2'-6" x 2'-6" 762 x 762 L 2-6 R L 2-8 L R 2'-7 1/2" x 2'-7 1/2" 2'-8" x 2'-8" 813 x 813 3-0 R 2'-11 1/2" x 2'-11 1/2" 3'-0" x 3'-0" 914 x 914 L 3-6 R 3'-5 1/2" x 3'-5 1/2" 3'-6" x 3'-6" 1067 x 1067 Verify local or state egress requirements with your local building inspector. 26 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Casement Window Opening Specifications Sq. Ft. Vent Floor to Bottom of Clear Openinga Sq. Ft. Overall Unit Areab 9.71 9.71 9.71 9.71 9.71 9.71 9.71 9.71 9.71 9.71 9.71 19.16 25.16 31.16 37.16 43.16 49.16 55.16 61.16 67.16 73.16 79.16 1.59 2.11 2.63 3.14 3.66 4.18 4.70 5.21 5.73 6.25 6.77 1.57 2.06 2.55 3.04 3.54 4.03 4.52 5.01 5.50 5.99 6.49 60.89 54.89 48.89 42.89 36.89 30.89 24.89 18.89 12.89 30.89 24.89 2.86 3.59 4.31 5.04 5.77 6.50 7.23 7.96 8.69 9.42 10.15 1.56 2.05 2.53 3.02 3.51 4.00 4.49 4.98 5.46 5.95 6.44 11.71 11.71 11.71 11.71 11.71 11.71 11.71 11.71 11.71 11.71 11.71 19.16 25.16 31.16 37.16 43.16 49.16 55.16 61.16 67.16 73.16 79.16 1.85 2.45 3.05 3.65 4.25 4.85 5.45 6.05 6.66 7.26 7.86 1.84 2.41 2.99 3.56 4.14 4.71 5.29 5.86 6.44 7.01 7.59 60.89 54.89 48.89 42.89 36.89 30.89 24.89 18.89 12.89 30.89 24.89 3.18 3.99 4.81 5.62 6.43 7.24 8.06 8.87 9.68 10.49 11.31 2020 2026 2030 2036 2040 2046 2050 2056 2060 2066 2070 2.09 2.75 3.40 4.06 4.71 5.36 6.02 6.67 7.33 7.98 8.64 15.71 15.71 15.71 15.71 15.71 15.71 15.71 15.71 15.71 15.71 15.71 19.16 25.16 31.16 37.16 43.16 49.16 55.16 61.16 67.16 73.16 79.16 2.36 3.13 3.89 4.66 5.43 6.20 6.96 7.73 8.50 9.27 10.04 2.37 3.11 3.85 4.59 5.33 6.08 6.82 7.56 8.30 9.04 9.78 60.89 54.89 48.89 42.89 36.89 30.89 24.89 18.89 12.89 30.89 24.89 3.84 4.81 5.79 6.77 7.75 8.73 9.71 10.69 11.67 12.65 13.63 2420 2426 2430 2436 2440 2446 2450 2456 2460 2466 2470 2.62 3.44 4.27 5.09 5.91 6.73 7.55 8.37 9.19 10.89 11.79 19.71 19.71 19.71 19.71 19.71 19.71 19.71 19.71 19.71 21.44 21.44 19.16 25.16 31.16 37.16 43.16 49.16 55.16 61.16 67.16 73.16 79.16 2.87 3.80 4.74 5.67 6.61 7.54 8.48 9.41 10.35 11.28 12.21 2.90 3.81 4.72 5.63 6.53 7.44 8.35 9.26 10.17 11.08 11.98 60.89 54.89 48.89 42.89 36.89 30.89 24.89 18.89 12.89 30.89 24.89 4.49 5.63 6.78 7.93 9.07 10.22 11.36 12.51 13.65 14.80 15.95 Sq. Ft. Clear Opening Width 1620 1626 1630 1636 1640 1646 1650 1656 1660 1666 1670 1.29 1.70 2.10 2.51 2.91 3.32 3.72 4.13 4.53 4.93 5.34 1820 1826 1830 1836 1840 1846 1850 1856 1860 1866 1870 casement Height Sq. Ft. Daylight Opening Clear Opening Call Size aFloor to bottom of clear opening dimensions are based on 82" jamb height of a typical door. bSq. Ft. Overall Unit Area is calculated on the jamb dimension. All units 32.5" or wider in rough opening width are manufactured with a 14" hinge. Sash opens to approximately 80º at full opening, which could limit emergency escape and rescue compatibility. Check with your local building inspector to verify local codes. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 27 casement Casement Window Opening Specifications Height Sq. Ft. Daylight Opening Sq. Ft. Vent Floor to Bottom of Clear Openinga Sq. Ft. Overall Unit Areab 21.71 21.71 21.71 23.44 21.71 21.71 21.71 21.71 21.71 21.71 21.71 19.16 25.16 31.16 37.16 43.16 49.16 55.16 61.16 67.16 73.16 79.16 3.13 4.14 5.16 6.18 7.20 8.21 9.23 10.25 11.27 12.29 13.30 3.17 4.16 5.15 6.14 7.13 8.12 9.12 10.11 11.10 12.09 13.08 60.89 54.89 48.89 42.89 36.89 30.89 24.89 18.89 12.89 30.89 24.89 4.81 6.04 7.27 8.50 9.73 10.96 12.19 13.42 14.65 15.88 17.11 2.88 3.78 4.68 6.12 6.48 7.39 8.29 9.19 10.09 10.99 11.89 21.63 21.63 21.63 23.71 21.63 21.63 21.63 21.63 21.63 21.63 21.63 19.16 25.16 31.16 37.16 43.16 49.16 55.16 61.16 67.16 73.16 79.16 3.38 4.48 5.58 6.69 7.79 8.89 9.99 11.09 12.19 13.29 14.39 3.43 4.51 5.58 6.66 7.73 8.81 9.88 10.96 12.03 13.11 14.18 60.89 54.89 48.89 42.89 36.89 30.89 24.89 18.89 12.89 30.89 24.89 5.14 6.45 7.77 9.08 10.39 11.70 13.02 14.33 15.64 16.95 18.27 3.40 4.47 6.00 6.60 7.66 8.73 9.79 10.86 11.92 12.99 14.05 25.57 25.57 27.71 25.57 25.57 25.57 25.57 25.57 25.57 25.57 25.57 19.16 25.16 31.16 37.16 43.16 49.16 55.16 61.16 67.16 73.16 79.16 3.89 5.16 6.43 7.70 8.96 10.23 11.50 12.77 14.04 15.30 16.57 3.97 5.21 6.45 7.69 8.93 10.17 11.41 12.66 13.90 15.14 16.38 60.89 54.89 48.89 42.89 36.89 30.89 24.89 18.89 12.89 30.89 24.89 5.79 7.27 8.75 10.23 11.71 13.19 14.67 16.15 17.63 19.11 20.59 Clear Opening Call Size Sq. Ft. Clear Opening Width 2620 2626 2630 2636 2640 2646 2650 2656 2660 2666 2670 2.89 3.79 4.70 6.05 6.51 7.41 8.32 9.22 10.13 11.03 11.94 2820 2826 2830 2836 2840 2846 2850 2856 2860 2866 2870 3020 3026 3030c 3036 3040 3046 3050 3056 3060 3066 3070 Shaded sizes meet or exceed egress opening requirements per 2006 IBC (International Building Code) minimum dimensions of 20" clear opening width, 24" clear opening height, 5.7 sq. ft. clear opening and floor to bottom of clear opening not to exceed 44" in height. aFloor to bottom of clear opening dimensions are based on 82" header height of a typical door. bSq. Ft. Overall Unit Area is calculated on the jamb dimension. cThese windows meet or exceed emergency escape and rescue opening requirements if installed lower in the wall so the "Floor to Bottom of Clear Opening Height" does not exceed 44" in height. All units 32.5" or wider in rough opening width are manufactured with a 14" hinge. Sash opens to approximately 82º at full opening, which could limit emergency escape and rescue compatibility. Check with your local building inspector to verify local codes. 28 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Casement Window Cross Sections 11" 516 9" 416 VARIES 9" 216 3" 316 DAYLIGHT OPENING 1 4" 1 4" 1" 14 5" 8 9" 216 JAMB / UNIT HEIGHT ROUGH OPENING HEIGHT 9" 216 9" 216 DAYLIGHT OPENING JAMB / UNIT HEIGHT casement ROUGH OPENING HEIGHT 9" 416 VARIES 1" 216 1" 14 1 4" 1" 116 2" 1" 14 1 4" 1" 116 11" 516 3" 18 3" 316 SELECT 500 CASEMENT WINDOW SELECT 500 CASEMENT PICTURE WINDOW Vertical Section Vertical Section 13 4" 1" 216 9" 216 DAYLIGHT OPENING 9" 216 JAMB / UNIT WIDTH 1 4" VARIES 9" 416 9" 416 3" 316 1 4" 9" 216 DAYLIGHT OPENING 9" 216 JAMB / UNIT WIDTH ROUGH OPENING WIDTH 1 4" 1" 116 1 4" 1" 116 3" 316 VARIES 13 8" 1" 216 13 8" 13 4" 3" 18 ROUGH OPENING WIDTH SELECT 500 CASEMENT WINDOW SELECT 500 CASEMENT PICTURE WINDOW Horizontal Section Horizontal Section Note: All dimensions are approximate. Crestline reserves the right to change specifications without notice. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 29 casement Casement Window Cross Sections 30 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Awning Window Elevations awning C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 31 Awning Window Opening Specifications awning Call Size Vent Sq. Ft. Vent Sq. Ft. Daylight Opening Sq. Ft. Overall Unit Areaa Width Height 1616 1618 1620 1626 1630 1636 1640 13.44 13.44 13.44 13.44 13.44 13.44 13.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 0.89 1.08 1.36 1.92 2.29 2.85 3.23 1.07 1.25 1.59 2.11 2.63 3.14 3.66 2.13 2.37 2.86 3.59 4.31 5.04 5.77 1816 1818 1820 1826 1830 1836 1840 15.44 15.44 15.44 15.44 15.44 15.44 15.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 1.03 1.24 1.56 2.21 2.64 3.28 3.71 1.25 1.45 1.85 2.45 3.05 3.65 4.25 2.37 2.64 3.18 3.99 4.81 5.62 6.43 2016 2018 2020 2026 2030 2036 2040 19.44 19.44 19.44 19.44 19.44 19.44 19.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 1.29 1.56 1.97 2.78 3.32 4.13 4.67 1.59 1.85 2.36 3.13 3.89 4.66 5.43 2.86 3.18 3.84 4.81 5.79 6.77 7.75 2416 2418 2420 2426 2430 2436 2440 23.44 23.44 23.44 23.44 23.44 23.44 23.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 1.56 1.89 2.37 3.35 4.00 4.98 5.63 1.94 2.25 2.87 3.80 4.74 5.67 6.61 3.34 3.72 4.49 5.63 6.78 7.93 9.07 2616 2618 2620 2626 2630 2636 2640 25.44 25.44 25.44 25.44 25.44 25.44 25.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 1.69 2.05 2.58 3.64 4.34 5.40 6.11 2.11 2.45 3.13 4.14 5.16 6.18 7.20 3.59 3.99 4.81 6.04 7.27 8.50 9.73 2816 2818 2820 2826 2830 2836 2840 27.44 27.44 27.44 27.44 27.44 27.44 27.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 1.83 2.21 2.78 3.92 4.68 5.83 6.59 2.28 2.65 3.38 4.48 5.58 6.69 7.79 3.83 4.27 5.14 6.45 7.77 9.08 10.39 Shaded sizes meet or exceed egress opening requirements per 2006 IBC (International Building Code) minimum dimensions of 20" clear opening width, 24" clear opening height, 5.7 sq. ft. clear opening and floor to bottom of clear opening not to exceed 44" in height. a Sq. Ft. Overall Unit Area is calculated on the jamb dimension. 32 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Awning Window Opening Specifications Call Size Vent Sq. Ft. Vent Sq. Ft. Daylight Opening Sq. Ft. Overall Unit Areaa Height 3016 3018 3020 3026 3030 3036 3040 31.44 31.44 31.44 31.44 31.44 31.44 31.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 2.09 2.53 3.18 4.49 5.37 6.68 7.55 2.63 3.05 3.89 5.16 6.43 7.70 8.96 4.31 4.81 5.79 7.27 8.75 10.23 11.71 3616 3618 3620 3626 3630 3636 3640 37.44 37.44 37.44 37.44 37.44 37.44 37.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 2.49 3.01 3.79 5.35 6.39 7.95 8.99 3.14 3.65 4.66 6.18 7.70 9.21 10.73 5.04 5.62 6.77 8.50 10.23 11.96 13.69 4016 4018 4020 4026 4030 4036 4040 43.44 43.44 43.44 43.44 43.44 43.44 43.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 2.89 3.49 4.40 6.21 7.42 9.23 10.43 3.66 4.25 5.43 7.20 8.96 10.73 12.50 5.77 6.43 7.75 9.73 11.71 13.69 15.67 4616 4618 4620 4626 4630 4636 4640 49.44 49.44 49.44 49.44 49.44 49.44 49.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 3.29 3.98 5.01 7.07 8.44 10.50 11.87 4.18 4.85 6.20 8.21 10.23 12.25 14.27 6.50 7.24 8.73 10.96 13.19 15.42 17.65 5016 5018 5020 5026 5030 5036 5040 55.44 55.44 55.44 55.44 55.44 55.44 55.44 9.59 11.59 14.59 20.59 24.59 30.59 34.59 3.69 4.46 5.62 7.93 9.46 11.77 13.31 4.70 5.45 6.96 9.23 11.50 13.77 16.04 7.23 8.06 9.71 12.19 14.67 17.15 19.63 awning Width Shaded sizes meet or exceed egress opening requirements per 2006 IBC (International Building Code) minimum dimensions of 20" clear opening width, 24" clear opening height, 5.7 sq. ft. clear opening and floor to bottom of clear opening not to exceed 44" in height. a Sq. Ft. Overall Unit Area is calculated on the jamb dimension. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 33 Awning Window Cross Sections 11" 516 9" 416 VARIES 7" 216 313 16" 1 16" SELECT 500 AWNING WINDOW 5" 8 9" 216 3" 516 DAYLIGHT OPENING JAMB / UNIT HEIGHT awning ROUGH OPENING HEIGHT 9" 216 2" 1" 14 1 4" 1" 116 1 4" Horizontal Mull Section - Pic / Awn 3" 316 3" 18 SELECT 500 AWNING WINDOW Vertical Section 13 4" 35 8" 7 216" 1" 216 1 4" 9" 216 DAYLIGHT OPENING 9" 216 JAMB / UNIT WIDTH 1 4" 9" 416 1" 116 3" 316 VARIES 13 8" 1 16" 3" 516 1 16" ROUGH OPENING WIDTH 34 SELECT 500 AWNING WINDOW SELECT 500 AWNING WINDOW Horizontal Section Vertical Mull Section - AWN / AWN Note: All dimensions are approximate. Crestline reserves the right to change specifications without notice. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Double Slider Window Elevations slider C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 35 slider Slider Window Opening Specifications 36 Height Sq. Ft. Daylight Opening Sq. Ft. Vent Floor to Bottom of Clear Openinga Sq. Ft. Overall Unit Areab 13.884 13.884 13.884 13.884 13.884 13.884 13.884 13.884 13.884 19.500 25.500 31.500 37.500 43.500 49.500 55.500 61.500 67.500 3.117 4.242 5.367 6.492 7.617 8.742 9.867 10.992 12.117 1.880 2.459 3.037 3.616 4.194 4.773 5.351 5.930 6.508 60.564 54.564 48.564 42.564 36.564 30.564 24.564 42.564 36.564 5.79 7.27 8.75 10.23 11.71 13.19 14.67 16.15 17.63 2.286 2.990 3.693 4.397 5.100 5.804 6.507 7.211 7.914 16.884 16.884 16.884 16.884 16.884 16.884 16.884 16.884 16.884 19.500 25.500 31.500 37.500 43.500 49.500 55.500 61.500 67.500 3.810 5.185 6.560 7.935 9.310 10.685 12.060 13.435 14.810 2.286 2.990 3.693 4.397 5.100 5.804 6.507 7.211 7.914 60.564 54.564 48.564 42.564 36.564 30.564 24.564 42.564 36.564 6.77 8.50 10.23 11.96 13.69 15.42 17.15 18.88 20.61 4020 4026 4030 4036 4040* 4046* 4050* 4056* 4060* 2.715 3.550 4.386 5.221 6.056 6.892 7.727 8.562 9.398 20.048 20.048 20.048 20.048 20.048 20.048 20.048 20.048 20.048 19.500 25.500 31.500 37.500 43.500 49.500 55.500 61.500 67.500 4.503 6.128 7.753 9.378 11.003 12.628 14.253 15.878 17.503 2.715 3.550 4.386 5.221 6.056 6.892 7.727 8.562 9.398 60.564 54.564 48.564 42.564 36.564 30.564 24.564 42.564 36.564 7.75 9.73 11.71 13.69 15.67 17.65 19.63 21.61 23.59 4620 4626 4630 4636 4640 4646 4650 4656 4660 3.099 4.052 5.006 5.959 6.913 7.866 8.820 9.773 10.727 22.884 22.884 22.884 22.884 22.884 22.884 22.884 22.884 22.884 19.500 25.500 31.500 37.500 43.500 49.500 55.500 61.500 67.500 5.195 7.070 8.945 10.820 12.695 14.570 16.445 18.320 20.195 3.099 4.052 5.006 5.959 6.913 7.866 8.820 9.773 10.727 60.564 54.564 48.564 42.564 36.564 30.564 24.564 42.564 36.564 8.73 10.96 13.19 15.42 17.65 19.88 22.11 24.34 26.56 Clear Opening Call Size Sq. Ft. Clear Opening Width 3020 3026 3030 3036 3040 3046 3050 3056 3060 1.880 2.459 3.037 3.616 4.194 4.773 5.351 5.930 6.508 3620 3626 3630 3636 3640 3646 3650 3656 3660 Shaded sizes meet or exceed egress opening requirements per 2006 IBC (International Building Code) minimum dimensions of 20" clear opening width, 24" clear opening height, 5.7 sq. ft. clear opening and floor to bottom of clear opening not to exceed 44". a Floor to bottom of clear opening dimensions are based on 82" header height. All units over 66 height are based off 106" header height for floor to clear opening dimension b Sq. Ft. Overall Unit Area is calculated on the jamb dimension. Clear opening width calculations were taken at 6º to the frame. Check local codes for egress compliance. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Slider Window Opening Specifications Height Sq. Ft. Daylight Opening Sq. Ft. Vent Floor to Bottom of Clear Openinga Sq. Ft. Overall Unit Areab 25.884 25.884 25.884 25.884 25.884 25.884 25.884 25.884 25.884 19.500 25.500 31.500 37.500 43.500 49.500 55.500 61.500 67.500 5.888 8.013 10.138 12.263 14.388 16.513 18.638 20.763 22.888 3.505 4.584 5.662 6.741 7.819 8.898 9.976 11.055 12.133 60.564 54.564 48.564 42.564 36.564 30.564 24.564 42.564 36.564 9.71 12.19 14.67 17.15 19.63 22.11 24.59 27.06 29.54 3.911 5.115 6.318 7.522 8.725 9.929 11.132 12.336 13.539 28.884 28.884 28.884 28.884 28.884 28.884 28.884 28.884 28.884 19.500 25.500 31.500 37.500 43.500 49.500 55.500 61.500 67.500 6.581 8.956 11.331 13.706 16.081 18.456 20.831 23.206 25.581 3.911 5.115 6.318 7.522 8.725 9.929 11.132 12.336 13.539 60.564 54.564 48.564 42.564 36.564 30.564 24.564 42.564 36.564 10.69 13.42 16.15 18.88 21.61 24.34 27.06 29.79 32.52 4.318 5.646 6.975 8.303 9.632 10.960 12.289 13.617 14.946 31.884 31.884 31.884 31.884 31.884 31.884 31.884 31.884 31.884 19.500 25.500 31.500 37.500 43.500 49.500 55.500 61.500 67.500 7.273 9.898 12.523 15.148 17.773 20.398 23.023 25.648 28.273 4.318 5.646 6.975 8.303 9.632 10.960 12.289 13.617 14.946 60.564 54.564 48.564 42.564 36.564 30.564 24.564 42.564 36.564 11.67 14.65 17.63 20.61 23.59 26.56 29.54 32.52 35.50 Clear Opening Call Size Sq. Ft. Clear Opening Width 5020 5026 5030 5036 5040 5046 5050 5056 5060 3.505 4.584 5.662 6.741 7.819 8.898 9.976 11.055 12.133 5620 5626 5630 5636 5640 5646 5650 5656 5660 6020 6026 6030 6036 6040 6046 6050 6056 6060 Shaded sizes meet or exceed egress opening requirements per 2006 IBC (International Building Code) minimum dimensions of 20" clear opening width, 24" clear opening height, 5.7 sq. ft. clear opening and floor to bottom of clear opening not to exceed 44". a Floor to bottom of clear opening dimensions are based on 82" header height. All units over 66 height are based off 106" header height for floor to clear opening dimension b Sq. Ft. Overall Unit Area is calculated on the jamb dimension. Clear opening width calculations were taken at 6º to the frame. Check local codes for egress compliance. slider C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 37 Slider Window Cross Sections 53 4" 45" 8 1" 4 2" 33" 8 DAYLIGHT OPENING JAMB / UNIT HEIGHT ROUGH OPENING HEIGHT 31" 2 11" 2 1" 4 1" SELECT 500 SLIDER WINDOW Vertical Section 23" 4 DAYLIGHT OPNG 1" 4 27" 8 DAYLIGHT OPNG 1" 53" 4 45" 8 11" 2 slider 11" 2 23" 4 1" 4 JAMB / UNIT WIDTH ROUGH OPENING WIDTH SELECT 500 SLIDER WINDOW Horizontal Section - Single Glider 38 Note: All dimensions are approximate. Crestline reserves the right to change specifications without notice. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Special Shapes – Radius & Geometric Elevations B B C B B B A A A A A Eyebrow with Extended Legs Half Circle with Extended Legs Quarter Circle with Extended Legs Half Circle Quarter Circle *Template is required when ordering replacement glass and interior trim for custom sizes. B B B B C C A A A Isosceles Triangle Right Angle Triangle Trapezoid B A B A Pentagon Rectangle A Octagon A - Rough Opening Width B - Rough Opening Height C - Rough Opening Leg For availability of specialty shapes not shown, contact customer service. Special Shape C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 39 Special Shape Window Cross Sections 11" 516 9" 416 VARIES 1 4" 1" 14 1" 116 3" 116 VARIES 9" 416 3" 18 17 8" DAYLIGHT OPENING WIDTH 1 4" 1" 116 3" 316 DAYLIGHT OPENING HEIGHT JAMB / UNIT HEIGHT ROUGH OPENING HEIGHT 17 8" 5" 8 15 8" 17 8" 1 4" JAMB / UNIT WIDTH ROUGH OPENING WIDTH SELECT 500 SPECIAL SHAPE DIRECT-SET 1 4" 3" 116 17 8" Horizontal Section 3" 316 3" 18 SELECT 500 SPECIAL SHAPE DIRECT-SET Vertical Section 5" 316 7 216" 37 8" 7" 216 5" 316 1 16" 1 16" 1 16" Special Shape 1 16" 40 37 8" SELECT 500 SPECIAL SHAPE / DIRECT-SET SELECT 500 DIRECT-SET WINDOW Vertical Mull Section Horizontal Mull Section Note: All dimensions are approximate. Crestline reserves the right to change specifications without notice. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Hinged patio doors Center Hinged Patio Door Elevations Center Hinged Patio Door Transom Elevations C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 41 Hinged patio doors Center Hinged French Door Opening Specifications Sq. Ft. Clear Opening Clear Opening b inches Sq. Ft. Daylight Opening Sq. Ft. Vent Insul Glass w/Flush Glazing Bead Ordering Size Hinge Code Hinge Code Hinge Code Hinge Code R/S S/L S/R/S R/S S/L S/R/S R/S/S S/S/L S/L/S R/S/S S/S/L S/L/S Height c with 7-1/2" Bottom Rail with 10" Bottom Rail with 12" Bottom Rail Hinge Code R/S S/L R/S/S S/S/L Hinge Code S/R/S S/L/S Sq. Ft. Overall Unit Area d 5-0 x 6-8 13.55 — 25.63 — 76.13 16.10 15.46 14.96 13.55 — 32.72 6-0 x 6-8 16.72 — 31.63 — 76.13 21.40 20.58 19.90 16.72 — 39.35 7-5 x 6-8 13.55 13.41 25.63 25.38 76.13 24.15 23.19 22.44 13.55 13.41 48.71 8-11 x 6-8 16.72 16.59 31.63 31.38 76.13 32.10 30.87 22.85 16.72 16.59 58.65 5-0 x 6-10 13.99 — 25.63 — 78.63 16.72 16.10 15.58 13.99 — 33.75 6-0 x 6-10 17.27 — 31.63 — 78.63 22.24 21.40 20.74 17.27 — 40.59 7-5 x 6-10 13.99 13.85 25.63 25.38 78.63 25.08 24.15 23.37 13.99 13.85 50.24 8-11 x 6-10 17.27 17.13 31.63 31.38 78.63 33.36 32.10 31.11 17.27 17.13 60.49 5-0 x 8-0 16.48 — 25.63 — 92.63 20.26 19.62 19.12 16.48 — 39.51 6-0 x 8-0 20.34 — 31.63 — 92.63 26.94 26.10 25.44 20.34 — 47.52 7-5 x 8-0 16.48 16.32 25.63 25.38 92.63 30.39 29.43 28.68 16.48 16.32 58.81 8-11 x 8-0 20.34 20.18 31.63 31.38 92.63 40.41 39.15 38.16 20.34 20.18 70.81 a All calculations assume operating panel is open 90 degrees. b Clear Opening Width and Height dimensions are rounded down to 1/16" [2mm]. c Clear Opening Height dimensions calculated without screen. d Sq. Ft. [cm2] Overall Unit Area is calculated on the jamb dimension. Center Hinged Patio Doors (Hinge Codes) Right / Stationary Side Hinged Patio Doors (Hinge Codes) Inswing Stationary Stationary / Left Inswing Right Inswing Left Outswing Stationary Stationary / Right / Stationary Right / Stationary / Right 42 C r e s t lin e Outswing Right Outswing Left Stationary / Left / Stationary Left / Stationary / Left S e l e c t 5 0 0 V inyl Cl a d Inactive / Active Inswing Active / Inactive Inswing Inactive / Active Outswing Active / Inactive Outswing Win d o w s & P a t i o D o o r s Hinged patio doors Side Hinged Patio Door Elevations Side Hinged Patio Door Transom Elevations C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 43 Hinged patio doors Inswing French Door Opening Specifications — Standard Sill Sq. Ft. Clear Opening Clear Openingb inches Sq. Ft. Daylight Opening Sq. Ft. Vent Insul Glass w/Flush Glazing Bead Width Bottom Rail 1 Oper. Panel 2 Oper. Panels Sq. Ft. Overall Unit Areac 7.73 7.48 13.55 — 16.74 8.93 8.58 8.30 14.60 — 17.85 76.44 10.70 10.29 9.95 16.72 — 20.06 — 76.44 11.24 10.80 10.45 17.38 — 20.75 19.44 40.63 76.44 10.78 10.36 10.02 10.28 21.51 26.10 27.85 25.44 52.63 76.44 16.10 15.46 14.96 13.45 27.85 32.72 14.50 29.97 27.44 56.63 76.44 17.86 17.16 16.60 14.50 29.97 34.93 6-0 x 6-8 16.62 34.20 31.44 64.63 76.44 21.40 20.58 19.90 16.62 34.20 39.35 6-2 x 6-8 17.25 35.49 32.69 67.06 76.44 22.48 21.60 20.90 17.25 35.49 40.70 2-7 x 6-10 13.99 — 25.75 — 78.94 8.36 8.05 7.79 13.99 — 17.27 2-9 x 6-10 15.08 — 27.75 — 78.94 9.28 8.93 8.65 15.08 — 18.41 3-1 x 6-10 17.27 — 31.75 — 78.94 11.12 10.70 10.37 17.27 — 20.69 3-2 x 6-10 17.95 — 33 — 78.94 11.69 11.24 10.89 17.95 — 21.40 4-0 x 6-10 10.61 22.22 19.44 40.63 78.94 11.20 10.78 10.44 10.61 22.22 26.92 5-0 x 6-10 13.89 28.77 25.44 52.63 78.94 16.72 16.10 15.58 13.89 28.77 33.75 5-4 x 6-10 14.98 30.95 27.44 56.63 78.94 18.56 17.86 17.30 14.98 30.95 36.03 6-0 x 6-10 17.17 35.32 31.44 64.63 78.94 22.24 21.40 20.74 17.17 35.32 40.59 6-2 x 6-10 17.81 36.65 32.69 67.06 78.94 23.38 22.48 21.78 17.81 36.65 41.98 2-7 x 8-0 16.48 — 25.75 — 92.94 10.13 9.81 9.56 16.48 — 20.21 2-9 x 8-0 17.77 — 27.75 — 92.94 11.24 10.89 10.61 17.77 — 21.55 3-1 x 8-0 20.34 — 31.75 — 92.94 13.47 13.05 12.72 20.34 — 24.22 3-2 x 8-0 21.15 — 33 — 92.94 14.15 13.71 13.36 21.15 — 25.05 4-0 x 8-0 12.50 26.17 19.44 40.63 92.94 13.56 13.14 12.80 12.50 26.17 31.51 5-0 x 8-0 16.36 33.89 25.44 52.63 92.94 20.26 19.62 19.12 16.36 33.89 39.51 5-4 x 8-0 17.65 36.46 27.44 56.63 92.94 22.48 21.78 21.22 17.65 36.46 42.18 6-0 x 8-0 20.22 41.61 31.44 64.63 92.94 26.94 26.10 25.44 20.22 41.61 47.52 6-2 x 8-0 20.99 43.18 32.69 67.06 92.94 28.30 27.42 26.72 20.99 43.18 49.14 with 7-1/2" with 10" with 12" Height Bottom Rail Bottom Rail — 76.44 8.05 27.75 — 76.44 — 31.75 — 17.38 — 32.88 4-0 x 6-8 10.28 21.51 5-0 x 6-8 13.45 5-4 x 6-8 Ordering Size 1 Oper. Panel 2 Oper. Panels 1 Oper. Panel 2 Oper. Panels 2-7 x 6-8 13.55 — 25.75 2-9 x 6-8 14.60 — 3-1 x 6-8 16.72 3-2 x 6-8 a All calculations assume operating panel is open 90 degrees. b Clear Opening Width and Height dimensions are rounded down to 1/16". c Sq. Ft. Overall Unit Area is calculated on the jamb dimension. 44 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Sq. Ft. Clear Opening Clear Opening b inches Sq. Ft. Daylight Opening Sq. Ft. Vent Insul Glass w/Flush Glazing Bead Width Bottom Rail 1 Oper. Panel 2 Oper. Panels Sq. Ft. Overall Unit Area c 7.48 13.49 — 16.74 8.58 8.30 14.54 — 17.85 10.70 10.29 9.95 16.63 — 20.06 75.44 11.24 10.80 10.45 17.29 — 20.75 40.63 75.44 10.78 10.36 10.02 10.18 21.28 26.10 25.44 52.63 75.44 16.10 15.46 14.96 13.33 27.57 32.72 29.66 27.44 56.63 75.44 17.86 17.16 16.60 14.37 29.66 34.93 16.47 33.86 31.44 64.63 75.44 21.40 20.58 19.90 16.47 33.86 39.35 6-2 x 6-8 17.12 35.13 32.69 67.06 75.44 22.48 21.60 20.90 17.12 35.13 40.70 2-7 x 6-10 13.94 — 25.75 — 77.94 8.36 8.05 7.79 13.94 — 17.27 2-9 x 6-10 15.02 — 27.75 — 77.94 9.28 8.93 8.65 15.02 — 18.41 3-1 x 6-10 17.18 — 31.75 — 77.94 11.12 10.70 10.37 17.18 — 20.69 3-2 x 6-10 17.86 — 33 — 77.94 11.69 11.24 10.89 17.86 — 21.40 4-0 x 6-10 10.52 21.99 19.44 40.44 77.94 11.20 10.78 10.44 10.52 21.99 26.92 5-0 x 6-10 13.77 28.48 25.44 52.44 77.94 16.72 16.10 15.58 13.77 28.48 33.75 5-4 x 6-10 14.85 30.65 27.44 56.44 77.94 18.56 17.86 17.30 14.85 30.65 36.03 6-0 x 6-10 17.02 34.98 31.44 64.44 77.94 22.24 21.40 20.74 17.02 34.98 40.59 6-2 x 6-10 17.69 36.30 32.69 67.69 77.94 23.38 22.48 21.78 17.69 36.30 41.98 2-7 x 8-0 16.44 — 25.75 — 91.94 10.13 9.81 9.56 16.44 — 20.21 2-9 x 8-0 17.72 — 27.75 — 91.94 11.24 10.89 10.61 17.72 — 21.55 3-1 x 8-0 20.27 — 31.75 — 91.94 13.47 13.05 12.72 20.27 — 24.22 3-2 x 8-0 21.07 — 33 — 91.94 14.15 13.71 13.36 21.07 — 25.05 4-0 x 8-0 12.41 25.94 19.44 40.44 91.94 13.56 13.14 12.80 12.41 25.94 31.51 5-0 x 8-0 16.24 33.60 25.44 52.44 91.94 20.26 19.62 19.12 16.24 33.60 39.51 5-4 x 8-0 17.52 36.15 27.44 56.44 91.94 22.48 21.78 21.22 17.52 36.15 42.18 6-0 x 8-0 20.07 41.26 31.44 64.44 91.94 26.94 26.10 25.44 20.07 41.26 47.52 6-2 x 8-0 20.87 42.82 32.69 67.06 91.94 28.30 27.42 26.72 20.87 42.82 49.14 with 7-1/2" with 10" with 12" Height Bottom Rail Bottom Rail 75.44 8.05 7.73 — 75.44 8.93 31.75 — 75.44 — 33 — 10.18 21.28 19.44 5-0 x 6-8 13.33 27.57 5-4 x 6-8 14.37 6-0 x 6-8 Ordering Size 1 Oper. Panel 2 Oper. Panels 1 Oper. Panel 2 Oper. Panels 2-7 x 6-8 13.49 — 25.75 — 2-9 x 6-8 14.54 — 27.75 3-1 x 6-8 16.63 — 3-2 x 6-8 17.29 4-0 x 6-8 Hinged patio doors Outswing French Door Opening Specifications — Standard 2-13/16 Sill a All calculations assume operating panel is open 90 degrees. b Clear Opening Width and Height dimensions are rounded down to 1/16". c Sq. Ft. Overall Unit Area is calculated on the jamb dimension. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 45 Hinged patio doors 46 Weather Shield Hinged Patio Door Cross Sections T i ed ati D r A ir e Serie C r e s t lin e S e l e c t 5 0 0 CROSS SECTION DETAILS V inyl Cl a d Win d o w s & P a t i o D o o r s T i ed ati D r A ir e Serie C r e s t lin e S e l e c t 5 0 0 CROSS SECTION DETAILS V inyl Cl a d Win d o w s & P a t i o D o o r s Hinged patio doors Weather Shield Hinged Patio Door Cross Sections 47 Hinged patio doors 48 Hinged Patio Door Cross Sections C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Sliding Patio Door Elevations sliding patio doors Sliding Patio Door Cross Sections C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 49 sliding patio doors Sliding Patio Door Cross Sections 50 C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s Sliding Patio Door Opening Specifications Sq. Ft. Clear Opening Width Sq. Ft. Vent Sq. Ft. Overall Unit Areaa 5068 50611 5080 6068 60611 6080 8068 80611 8080 11.634 12.149 13.998 14.812 15.467 17.822 21.167 22.104 25.469 21.967 21.967 21.967 27.967 27.967 27.967 39.967 39.967 39.967 76.264 79.639 91.764 76.264 79.639 91.764 76.264 79.639 91.764 24.415 25.393 29.859 30.394 31.612 37.172 42.352 44.049 51.797 11.634 12.149 13.998 14.812 15.467 17.822 21.167 22.104 25.469 32.95 34.35 39.36 41.27 47.29 47.29 52.89 55.13 63.17 Sq. Ft. Vent Sq. Ft. Overall Unit Areaa N/A N/A N/A N/A N/A N/A N/A N/A N/A 17.51 18.26 20.92 20.84 21.72 24.89 27.48 28.65 32.82 aSq. Ft. Overall Unit Area is calculated on the jamb dimension. Sliding Patio Door Fixed Studio Opening Specifications Call Size Sq. Ft. Clear Opening Width Height Sq. Ft. Daylight Opening 2668 26611 2680 3068 30611 3080 4068 40611 4080 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 24.415 25.393 29.859 30.394 31.612 37.172 42.352 44.049 51.797 Clear Opening sliding patio doors Height Sq. Ft. Daylight Opening Clear Opening Call Size aSq. Ft. Overall Unit Area is calculated on the jamb dimension. C r e s t lin e S e l e c t 5 0 0 V inyl Cl a d Win d o w s & P a t i o D o o r s 51 Crestline ® Select 500™ Crestline Windows and Doors www.crestlinewindows.com Crestline reserves the right to change product materials, specifications P.O. Box 309 Customer Service: 800-826-5509 and methods of manufacture without prior notice. Please verify unit Medford, WI 54401 dimensions and/or rough openings with your local store. Printed in the USA 1280689 10/14 Thermal Performance Data Select 500 Double Hung Windows (7105) ENERGY PERFORMANCE DATA Over 7/8' GIA or SDL 5/8" - 13/16" GIA No Grilles CANADIAN ENERGY PEFORMANCE DATA 45 0.53 56 3/4" Insul Low E w/Argon 0.28 0.31 0.53 59 3/4" Bronze Low E 0.31 0.30 0.40 56 3/4" Bronze Low E w/Argon 0.28 0.29 0.40 59 3/4" Insul Low-E 240 0.32 0.19 0.29 55 3/4" Insul Low-E 240 w/Argon 0.29 0.19 0.29 59 3/4" Zo-e-shield 5 0.31 0.21 0.47 56 3/4" Zo-e-shield 5 w/ Argon 0.28 0.20 0.47 60 3/4" Zo-e-shield 5 Extreme 0.26 0.19 0.43 3/4" Zo-e-shield 5 Extreme w/ Argon 0.24 0.19 3/4" Zo-e-shield 6 0.28 0.19 3/4" Zo-e-shield 6 w/ Argon 0.25 3/4" Clear Insul 0.44 Energy R ating 0.60 0.31 Air Infiltration L/s/m2 Condensation Resistance Rating 0.57 0.31 US U-Value (metric) Visible Light Transmittance 0.44 3/4" Insul Low-E Glazing Option U Value Solar Heat Gain Coefficient a 3/4" Clear Insul Glazing thickness Grille Option NFRC Total Unit Calculations 2.50 0.91 18 Y 1.76 0.91 19 Y Y 1.59 0.91 23 Y 1.76 0.91 18 Y Energy Star N NC SC Y Y S Y A B 1 Y Y Y Y Y 1.59 0.91 21 Y Y Y 1.82 0.91 11 Y Y Y Y 1.65 0.91 14 Y Y Y Y 1.76 0.91 13 Y Y Y Y Y 1.59 0.91 16 Y Y Y 44 Y Y Y Y 1.48 0.91 18 Y Y Y 0.43 48 Y Y Y Y 1.36 0.91 21 Y Y 0.42 37 Y Y Y Y 1.59 0.91 16 Y Y 0.19 0.42 45 Y Y Y Y Y Y 0.51 0.54 45 0.31 0.28 0.47 56 0.28 0.28 0.47 59 3/4" Bronze Low E 0.31 0.27 0.35 56 3/4" Bronze Low E w/Argon 0.28 0.26 0.35 59 3/4" Insul Low-E 240 0.32 0.17 0.26 55 3/4" Insul Low-E 240 w/Argon 0.29 0.17 0.26 59 3/4" Zo-e-shield 5 0.31 0.19 0.42 56 3/4" Zo-e-shield 5 w/ Argon 0.28 0.18 0.42 60 3/4" Zo-e-shield 5 Extreme 0.26 0.17 0.38 3/4" Zo-e-shield 5 Extreme w/ Argon 0.24 0.17 0.38 Y Y Y 1.42 0.91 19 2.50 0.91 14 Y Y 1.76 0.91 17 Y Y Y 1.59 0.91 21 Y Y Y 1.76 0.91 17 Y Y 1.59 0.91 20 Y 1.82 0.91 10 Y Y Y Y 1.65 0.91 13 Y Y Y Y 1.76 0.91 12 Y Y Y Y Y 1.59 0.91 15 Y Y 44 Y Y Y Y 1.48 0.91 17 Y Y 48 Y Y Y Y 1.36 0.91 19 Y Y 0.29 0.17 0.37 37 Y Y Y Y 1.65 0.91 13 Y 0.17 0.37 45 Y Y Y Y 1.48 0.91 17 Y 3/4" Clear Insul 0.44 0.45 0.47 45 2.50 0.91 11 3/4" Insul Low-E 0.31 0.25 0.41 56 3/4" Insul Low E w/Argon 0.28 0.25 0.41 59 3/4" Bronze Low E 0.31 0.24 0.31 56 Y Y Y Y 1.76 0.91 15 Y Y Y 1.59 0.91 19 Y Y Y Y 1.76 0.91 15 Y Y Y Y 1.59 0.91 19 Y Y Y Y 1.82 0.91 9 Y Y Y Y 1.65 0.91 12 Y Y Y Y 1.76 0.91 11 Y Y Y Y Y Y 0.28 0.24 0.31 59 0.32 0.16 0.23 55 3/4" Insul Low-E 240 w/Argon 0.29 0.15 0.23 59 3/4" Zo-e-shield 5 0.31 0.17 0.37 56 3/4" Zo-e-shield 5 w/ Argon 0.28 0.17 0.37 60 Y Y Y Y 1.59 0.91 15 Y Y 3/4" Zo-e-shield 5 Extreme 0.26 0.16 0.33 44 Y Y Y Y 1.48 0.91 16 Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.24 0.16 0.33 48 Y Y Y Y 1.36 0.91 19 Y Y 3/4" Zo-e-shield 6 0.29 0.16 0.33 37 Y Y Y Y 1.65 0.91 13 Y 3/4" Zo-e-shield 6 w/ Argon 0.26 0.16 0.33 45 Y Y Y Y 1.48 0.91 16 Y a Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Climate Zone Northern North-Central South-Central Southern U-Factor <=0.30 <=0.31 <=0.32 <=0.32 <=0.35 <=0.60 *SHGC Any >=0.35 >=0.40 <=0.40 <=0.30 <=0.27 Y Y 3/4" Insul Low-E 240 Y Y Y Y 3/4" Bronze Low E w/Argon Y Y Y Y Y 0.26 Y Y Y Y 3/4" Zo-e-shield 6 Y Y Y Y Y Y Y Y 3/4" Zo-e-shield 6 w/ Argon As of January 2010 D Y 3/4" Insul Low-E * SHGC = Solar Heat Gain Coefficient C Y 3/4" Insul Low E w/Argon US Qualification Criteria CANADA Energy Star (2015) CANADA Energy Star (2010) Y Y Y Y Y 2 Y 3 Thermal Performance Data Select 500 Double Hung Picture (7305 Direct Set) ENERGY PERFORMANCE DATA No Grilles 5/8" - 13/16" GIA 0.71 48 N NC SC S Energy R ating Condensation Resistance Rating 0.67 Energy Star Air Infiltration L/s/m2 Visible Light Transmittance 0.45 US 2.56 0.01 23 A 3/4" Insul Low-E 0.30 0.36 0.62 64 Y Y 1.70 0.01 23 Y 0.26 0.36 0.62 67 Y Y 1.48 0.01 28 Y 3/4" Bronze Low E 0.30 0.35 0.47 64 Y Y 1.70 0.01 23 Y 3/4" Bronze Low E w/Argon 0.26 0.34 0.47 67 Y Y 3/4" Zo-e-shield 5 0.30 0.24 0.56 65 Y Y Y Y CANADA Energy Star (2015) CANADA Energy Star (2010) 3/4" Insul Low E w/Argon 1.48 0.01 27 Y 1.70 0.01 17 Y B C D 1 Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.24 0.56 67 Y Y Y Y 1.48 0.01 22 Y Y 3/4" Zo-e-shield 5 Extreme 0.24 0.22 0.50 45 Y Y Y Y 1.36 0.01 23 Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.21 0.22 0.50 49 Y Y Y Y 1.19 0.01 27 Y Y Y 3/4" Zo-e-shield 6 0.26 0.22 0.50 42 Y Y Y Y 1.48 0.01 20 Y Y 3/4" Zo-e-shield 6 w/ Argon 2 Y Y Y Y Y 0.23 0.22 0.50 46 Y Y Y Y 1.31 0.01 24 Y Y Y Y Y 0.23 0.22 0.44 71 Y Y Y Y 1.31 0.01 24 Y Y Y Y Y 1" Zo-e-shield 7 w/ Argon 0.19 0.22 0.44 74 Y Y Y Y 1.08 0.01 29 Y Y Y Y Y 0.45 0.60 0.64 48 2.56 0.01 19 3/4" Insul Low-E 0.30 0.33 0.56 64 Y Y 1.70 0.01 22 Y 0.26 0.32 0.56 67 Y Y 1.48 0.01 26 Y 3/4" Bronze Low E 0.30 0.31 0.42 64 Y Y 1.70 0.01 21 Y 3/4" Bronze Low E w/Argon 0.26 0.31 0.42 67 Y Y 3/4" Zo-e-shield 5 0.30 0.22 0.50 65 Y Y Y Y 1.48 0.01 26 Y 1.70 0.01 15 Y Y Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.22 0.50 67 Y Y Y Y 1.48 0.01 20 Y Y 3/4" Zo-e-shield 5 Extreme 0.24 0.20 0.45 45 Y Y Y Y 1.36 0.01 22 Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.21 0.20 0.45 49 Y Y Y Y 1.19 0.01 25 Y Y Y 3/4" Zo-e-shield 6 0.27 0.20 0.44 42 Y Y Y Y 1.53 0.01 18 Y Y 3/4" Zo-e-shield 6 w/ Argon Y Y Y Y 0.24 0.20 0.44 46 Y Y Y Y 1.36 0.01 22 Y Y Y Y Y 0.24 0.20 0.40 71 Y Y Y Y 1.36 0.01 22 Y Y Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.20 0.40 74 Y Y Y Y 1.19 0.01 25 Y Y Y Y Y 0.45 0.54 0.57 48 2.56 0.01 15 3/4" Insul Low-E 0.30 0.29 0.50 64 Y Y Y 1.70 0.01 19 Y 0.26 0.29 0.50 67 Y Y Y 1.48 0.01 24 Y 3/4" Bronze Low E 0.30 0.28 0.37 64 Y Y Y 1.70 0.01 19 Y 3/4" Bronze Low E w/Argon 0.26 0.28 0.37 67 Y Y Y 3/4" Zo-e-shield 5 0.30 0.20 0.45 65 Y Y Y 1.48 0.01 24 Y Y 1.70 0.01 14 Y Y Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.20 0.45 67 Y Y Y Y 1.48 0.01 19 Y Y 3/4" Zo-e-shield 5 Extreme 0.24 0.19 0.40 45 Y Y Y Y 1.36 0.01 21 Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.21 0.18 0.40 49 Y Y Y Y 1.19 0.01 24 Y Y Y 3/4" Zo-e-shield 6 0.27 0.18 0.40 42 Y Y Y Y 1.53 0.01 17 Y Y 3/4" Zo-e-shield 6 w/ Argon Y Y Y Y Y 0.24 0.18 0.40 46 Y Y Y Y 1.36 0.01 21 Y Y Y Y Y 0.24 0.18 0.36 71 Y Y Y Y 1.36 0.01 21 Y Y Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.18 0.36 74 Y Y Y Y 1.19 0.01 24 Y Y Y Y Y US Qualification Criteria As of January 2010 * SHGC = Solar Heat Gain Coefficient Climate Zone Northern North-Central South-Central Southern U-Factor <=0.30 <=0.31 <=0.32 <=0.32 <=0.35 <=0.60 *SHGC Any >=0.35 >=0.40 <=0.40 <=0.30 <=0.27 Y Y Zo-e-shield 7 Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Y Y 1" a Y Y Zo-e-shield 7 3/4" Insul Low E w/Argon Y Y Y 1" 3/4" Clear Insul Y Y Zo-e-shield 7 3/4" Insul Low E w/Argon 3 Y 1" 3/4" Clear Insul Over 7/8' GIA or SDL Solar Heat Gain Coefficient 3/4" Clear Insul U Value Glazing thickness Grille Option Glazing Option U-Value (metric) CANADIAN ENERGY PEFORMANCE DATA NFRC Total Unit Calculationsa Y Y Thermal Performance Data Select 500 Casement Windows (7205) ENERGY PERFORMANCE DATA CANADIAN ENERGY PEFORMANCE DATA No Grilles Solar Heat Gain Coefficient Visible Light Transmittance Condensation Resistance Rating U-Value (metric) Air Infiltration L/s/m2 Energy R ating 0.43 0.55 0.58 45 2.44 0.41 18 3/4" Insul Low-E 0.30 0.30 0.52 57 Y Y Y 1.70 0.41 20 Y 3/4" Insul Low E w/Argon 0.27 0.30 0.52 61 Y Y Y 1.53 0.41 24 Y 3/4" Bronze Low E 0.30 0.36 0.52 57 Y Y 1.70 0.41 23 Y Glazing Option 5/8" - 13/16" GIA US N Energy Star NC SC 3/4" Bronze Low E w/Argon 0.27 0.36 0.52 61 Y Y 3/4" Insul Low-E 240 0.30 0.19 0.29 57 Y Y Y S Y CANADA Energy Star (2015) CANADA Energy Star (2010) A 1.53 0.41 27 Y 1.70 0.41 13 Y 3/4" Insul Low-E 240 w/Argon 0.27 0.19 0.29 60 Y Y Y Y 1.53 0.41 17 Y 3/4" Zo-e-shield 5 0.30 0.20 0.46 58 Y Y Y Y 1.70 0.41 14 Y B C D 1 Y Y Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.20 0.46 61 Y Y Y Y 1.48 0.41 19 Y Y 3/4" Zo-e-shield 5 Extreme 0.25 0.19 0.42 45 Y Y Y Y 1.42 0.41 20 Y Y Y Y Y Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.19 0.42 49 3/4" Zo-e-shield 6 0.32 0.20 0.45 51 3/4" Zo-e-shield 6 w/ Argon Y Y Y 1.31 0.41 22 Y Y Y Y 1.82 0.41 12 Y 0.27 0.20 0.45 59 Y Y Y Y 1.53 0.41 18 Y Y Zo-e-shield 7 0.24 0.19 0.37 65 Y Y Y Y 1.36 0.41 21 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.18 0.37 70 Y Y Y Y 1.19 0.41 24 Y Y Y 0.43 0.50 0.54 45 2.44 0.41 15 3/4" Insul Low-E 0.30 0.28 0.47 57 Y Y Y 3/4" Insul Low E w/Argon 0.27 0.27 0.47 61 Y Y Y 3/4" Bronze Low E 0.30 0.33 0.47 57 Y Y 3/4" Bronze Low E w/Argon 0.27 0.33 0.47 61 Y Y 3/4" Insul Low-E 240 0.30 0.18 0.26 57 Y Y Y Y Y 1.70 0.41 19 Y 1.53 0.41 22 Y 1.70 0.41 22 Y 1.53 0.41 25 Y 1.70 0.41 13 Y 3/4" Insul Low-E 240 w/Argon 0.27 0.17 0.26 60 Y Y Y Y 1.53 0.41 16 Y 3/4" Zo-e-shield 5 0.30 0.19 0.42 58 Y Y Y Y 1.70 0.41 13 Y Y Y Y Y Y Y Y Y Y Y 0.26 0.18 0.42 61 Y Y Y Y 1.48 0.41 18 Y Y 0.25 0.17 0.38 45 Y Y Y Y 1.42 0.41 19 Y Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.17 0.38 49 Y Y Y Y 1.31 0.41 21 Y Y Y Y 3/4" Zo-e-shield 6 0.33 0.19 0.41 51 Y Y 1.87 0.41 10 Y 0.28 0.18 0.41 59 Y Y Y Y 1.59 0.41 15 Y Y 1" Zo-e-shield 7 0.24 0.17 0.34 65 Y Y Y Y 1.36 0.41 20 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.17 0.34 70 Y Y Y Y 1.19 0.41 23 Y Y Y 3/4" Clear Insul 0.43 0.45 0.48 45 2.44 0.41 12 3/4" Insul Low-E 0.30 0.25 0.42 57 Y Y Y Y 1.70 0.41 17 3/4" Insul Low E w/Argon 0.27 0.25 0.42 61 Y Y Y Y 1.53 0.41 21 Y 3/4" Bronze Low E 0.30 0.30 0.42 57 Y Y Y 1.70 0.41 20 Y 3/4" Bronze Low E w/Argon 0.27 0.30 0.42 61 Y Y Y 0.30 0.16 0.23 57 Y Y Y Y 1.53 0.41 24 Y 1.70 0.41 12 Y 3/4" Insul Low-E 240 w/Argon 0.27 0.16 0.23 60 Y Y Y Y 1.53 0.41 15 Y 0.30 0.17 0.38 58 Y Y Y Y 1.70 0.41 12 Y Y Y Y Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.17 0.38 61 Y Y Y Y 1.48 0.41 17 Y Y 0.25 0.16 0.34 45 Y Y Y Y 1.42 0.41 18 Y Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.16 0.34 49 Y Y Y Y 1.31 0.41 20 Y Y Y Y 3/4" Zo-e-shield 6 0.33 0.17 0.37 51 Y Y 1.87 0.41 9 3/4" Zo-e-shield 6 w/ Argon Y Y 0.28 0.17 0.37 59 Y Y Y Y 1.59 0.41 15 Y 1" Zo-e-shield 7 0.24 0.16 0.30 65 Y Y Y Y 1.36 0.41 19 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.16 0.30 70 Y Y Y Y 1.19 0.41 23 Y Y Y US Qualification Criteria As of January 2010 * SHGC = Solar Heat Gain Coefficient Climate Zone Northern North-Central South-Central Southern U-Factor <=0.30 <=0.31 <=0.32 <=0.32 <=0.35 <=0.60 *SHGC Any >=0.35 >=0.40 <=0.40 <=0.30 <=0.27 Y Y 3/4" Zo-e-shield 5 Extreme Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Y Y 3/4" Zo-e-shield 5 a Y Y 3/4" Zo-e-shield 5 w/ Argon 3/4" Insul Low-E 240 3 Y 3/4" Zo-e-shield 5 Extreme 3/4" Zo-e-shield 6 w/ Argon 2 Y 1" 3/4" Clear Insul Over 7/8' GIA or SDL U Value 3/4" Clear Insul Glazing thickness Grille Option NFRC Total Unit Calculationsa Y Y Y Y Y Y Thermal Performance Data Select 500 Casement Picture Windows (7205) ENERGY PERFORMANCE DATA No Grilles 5/8" - 13/16" GIA 0.66 45 N NC SC S Energy R ating Condensation Resistance Rating 0.62 Energy Star Air Infiltration L/s/m2 Visible Light Transmittance 0.44 US 2.50 0.05 21 CANADA Energy Star (2010) A 3/4" Insul Low-E 0.30 0.34 0.59 57 Y Y 1.70 0.05 22 Y 3/4" Insul Low E w/Argon 0.26 0.34 0.59 60 Y Y 1.48 0.05 27 Y 3/4" Bronze Low E 0.30 0.41 0.59 57 Y 1.70 0.05 26 Y 3/4" Bronze Low E w/Argon 0.26 0.41 0.59 60 Y 3/4" Insul Low-E 240 0.30 0.21 0.33 56 Y Y Y Y 1.48 0.05 31 Y 1.70 0.05 15 Y 3/4" Insul Low-E 240 w/Argon 0.27 0.21 0.33 60 Y Y Y Y 1.53 0.05 19 Y 3/4" Zo-e-shield 5 0.29 0.23 0.53 57 Y Y Y Y 1.65 0.05 17 Y B C CANADA Energy Star (2015) D Y 1 2 Y Y Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.23 0.53 61 Y Y Y Y 1.48 0.05 21 Y Y 0.24 0.21 0.48 45 Y Y Y Y 1.36 0.05 22 Y Y Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.22 0.21 0.48 49 Y Y Y Y 1.25 0.05 25 Y Y Y Y Y 3/4" Zo-e-shield 6 0.31 0.23 0.52 54 Y Y Y 1.76 0.05 15 Y 3/4" Zo-e-shield 6 w/ Argon 0.27 0.23 0.52 58 Y Y Y Y 1.53 0.05 20 Y Y Y 1" Zo-e-shield 7 0.23 0.21 0.42 66 Y Y Y Y 1.31 0.05 24 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.19 0.21 0.42 70 Y Y Y Y 1.08 0.05 28 Y Y Y 0.44 0.56 0.59 45 2.50 0.05 18 3/4" Insul Low-E 0.30 0.31 0.52 57 Y Y 1.70 0.05 21 Y 3/4" Insul Low E w/Argon 0.26 0.31 0.52 60 Y Y 1.48 0.05 26 Y 3/4" Bronze Low E 0.30 0.37 0.52 57 Y Y 1.70 0.05 24 Y 3/4" Bronze Low E w/Argon 0.26 0.37 0.52 60 Y Y 3/4" Insul Low-E 240 0.30 0.19 0.29 56 Y Y Y Y 1.48 0.05 29 Y 1.70 0.05 14 Y 3/4" Insul Low-E 240 w/Argon 0.27 0.19 0.29 60 Y Y Y Y 1.53 0.05 17 Y 3/4" Zo-e-shield 5 0.29 0.21 0.47 57 Y Y Y Y 1.65 0.05 16 Y Y Y Y Y Y Y Y Y Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.20 0.47 61 Y Y Y Y 1.48 0.05 19 Y Y 0.24 0.19 0.43 45 Y Y Y Y 1.36 0.05 21 Y Y Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.22 0.19 0.43 49 Y Y Y Y 1.25 0.05 24 Y Y Y Y Y 3/4" Zo-e-shield 6 0.33 0.21 0.46 54 Y Y 1.87 0.05 11 3/4" Zo-e-shield 6 w/ Argon Y 0.28 0.20 0.46 58 Y Y Y Y 1.59 0.05 17 Y Y 1" Zo-e-shield 7 0.24 0.19 0.38 66 Y Y Y Y 1.36 0.05 21 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.20 0.19 0.38 70 Y Y Y Y 1.14 0.05 26 Y Y Y 0.44 0.50 0.53 45 2.50 0.05 14 3/4" Insul Low-E 0.30 0.28 0.47 57 Y Y Y 1.70 0.05 19 Y 3/4" Insul Low E w/Argon 0.26 0.28 0.47 60 Y Y Y 1.48 0.05 24 Y 3/4" Bronze Low E 0.30 0.33 0.47 57 Y Y 1.70 0.05 22 Y 3/4" Bronze Low E w/Argon 0.26 0.33 0.47 60 Y Y 3/4" Insul Low-E 240 0.30 0.18 0.26 56 Y Y Y Y 1.48 0.05 27 Y 1.70 0.05 13 Y Y Y Y Y Y Y Y Y Y Y Y Y 3/4" Insul Low-E 240 w/Argon 0.27 0.17 0.26 60 Y Y Y Y 1.53 0.05 16 Y 3/4" Zo-e-shield 5 0.29 0.19 0.42 57 Y Y Y Y 1.65 0.05 15 Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.19 0.42 60 Y Y Y Y 1.48 0.05 19 Y Y 3/4" Zo-e-shield 5 Extreme 0.24 0.18 0.38 45 Y Y Y Y 1.36 0.05 21 Y Y Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.22 0.17 0.38 49 Y Y Y Y 1.25 0.05 22 Y Y Y Y Y 3/4" Zo-e-shield 6 0.33 0.19 0.41 54 Y Y 1.87 0.05 10 3/4" Zo-e-shield 6 w/ Argon 0.28 0.18 0.41 58 Y Y Y Y 1.59 0.05 16 Y Y Zo-e-shield 7 0.24 0.17 0.33 66 Y Y Y Y 1.36 0.05 20 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.20 0.17 0.33 70 Y Y Y Y 1.14 0.05 25 Y Y Y Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. US Qualification Criteria As of January 2010 * SHGC = Solar Heat Gain Coefficient Climate Zone Northern North-Central South-Central Southern U-Factor <=0.30 <=0.31 <=0.32 <=0.32 <=0.35 <=0.60 *SHGC Any >=0.35 >=0.40 <=0.40 <=0.30 <=0.27 Y Y 1" a Y Y 3/4" Zo-e-shield 5 Extreme 3/4" Clear Insul 3 Y 3/4" Zo-e-shield 5 Extreme 3/4" Clear Insul Over 7/8' GIA or SDL Solar Heat Gain Coefficient 3/4" Clear Insul U Value Glazing thickness Grille Option Glazing Option U-Value (metric) CANADIAN ENERGY PEFORMANCE DATA NFRC Total Unit Calculationsa Y Y Y Y Y Thermal Performance Data Select 500 Awning Windows (7205) ENERGY PERFORMANCE DATA No Grilles 5/8" - 13/16" GIA 0.58 44 N NC SC S Energy R ating Condensation Resistance Rating 0.55 Energy Star Air Infiltration L/s/m2 Visible Light Transmittance 0.43 US 2.44 0.05 18 CANADA Energy Star (2010) A 3/4" Insul Low-E 0.30 0.30 0.52 55 Y Y Y 1.70 0.05 20 Y 3/4" Insul Low E w/Argon 0.27 0.30 0.52 59 Y Y Y 1.53 0.05 24 Y 3/4" Bronze Low E 0.30 0.36 0.52 55 Y Y 1.70 0.05 23 Y 3/4" Bronze Low E w/Argon 0.27 0.36 0.52 59 Y Y 3/4" Insul Low-E 240 0.31 0.19 0.29 55 3/4" Insul Low-E 240 w/Argon 0.27 0.19 0.29 59 3/4" Zo-e-shield 5 0.30 0.20 0.46 55 3/4" Zo-e-shield 5 w/ Argon 0.27 0.20 0.46 3/4" Zo-e-shield 5 Extreme 0.26 0.19 0.42 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.19 3/4" Zo-e-shield 6 0.32 3/4" Zo-e-shield 6 w/ Argon B C Y Y Y Y Y 1.53 0.05 27 Y Y Y 1.76 0.05 12 Y Y Y Y Y 1.53 0.05 17 Y Y Y Y Y 1.70 0.05 14 Y 59 Y Y Y Y 1.53 0.05 18 Y Y 43 Y Y Y Y 1.48 0.05 19 Y Y 0.42 48 Y Y Y Y 1.31 0.05 22 Y Y 0.20 0.45 44 Y Y Y 1.82 0.05 12 Y 0.28 0.20 0.45 57 Y Y Y Y 1.59 0.05 17 Y Y 0.24 0.19 0.37 66 Y Y Y Y 1.36 0.05 21 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.18 0.37 70 Y Y Y Y 1.19 0.05 24 Y Y Y 0.43 0.50 0.53 44 2.44 0.05 15 0.30 0.28 0.47 55 Y Y Y 1.70 0.05 19 0.27 0.28 0.47 59 Y Y Y 1.53 0.05 23 Y 3/4" Bronze Low E 0.30 0.33 0.47 55 Y Y 1.70 0.05 22 Y 3/4" Bronze Low E w/Argon 0.27 0.33 0.47 59 Y 3/4" Insul Low-E 240 0.31 0.18 0.26 55 3/4" Insul Low-E 240 w/Argon 0.27 0.17 0.26 59 3/4" Zo-e-shield 5 0.30 0.19 0.42 55 3/4" Zo-e-shield 5 w/ Argon 0.27 0.18 0.42 59 3/4" Zo-e-shield 5 Extreme 0.26 0.17 0.38 43 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.17 0.38 48 3/4" Zo-e-shield 6 0.33 0.19 0.41 44 Y Y 1.53 0.05 25 Y 0.05 12 Y Y Y Y Y Y Y Y Y 1.53 0.05 16 Y Y Y Y Y 1.70 0.05 14 Y Y Y Y Y 1.53 0.05 17 Y Y Y Y Y Y Y 1.48 0.05 17 Y Y Y Y Y Y Y 1.31 0.05 21 Y Y Y Y 1.87 0.05 10 Y 0.18 0.41 57 Y Y Y Y 1.59 0.05 16 Y Y 0.17 0.34 66 Y Y Y Y 1.36 0.05 20 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.17 0.34 70 Y Y Y Y 1.19 0.05 24 Y Y Y 0.43 0.45 0.48 44 2.44 0.05 12 3/4" Insul Low-E 0.30 0.25 0.42 55 Y Y Y Y 1.70 0.05 17 3/4" Insul Low E w/Argon 0.27 0.25 0.42 59 Y Y Y Y 1.53 0.05 21 Y 3/4" Bronze Low E 0.30 0.30 0.42 55 Y Y Y 1.70 0.05 20 Y 3/4" Bronze Low E w/Argon 0.27 0.30 0.42 59 Y Y Y 3/4" Insul Low-E 240 0.31 0.16 0.23 55 Y Y 3/4" Insul Low-E 240 w/Argon 0.27 0.16 0.23 59 Y Y Y Y 1.53 0.05 16 Y 3/4" Zo-e-shield 5 0.30 0.17 0.38 55 Y Y Y Y 1.70 0.05 12 Y 3/4" Zo-e-shield 5 w/ Argon 0.27 0.17 0.38 59 Y Y Y Y 1.53 0.05 16 Y Y 3/4" Zo-e-shield 5 Extreme 0.26 0.16 0.34 43 Y Y Y Y 1.48 0.05 17 Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.16 0.34 48 Y Y Y Y 1.31 0.05 21 Y Y 3/4" Zo-e-shield 6 0.33 0.17 0.37 44 Y Y 1.87 0.05 9 1.53 0.05 24 Y 1.76 0.05 11 Y Y Y Y Y Y 0.17 0.37 57 Y Y Y Y 1.59 0.05 15 Y Y 0.16 0.30 66 Y Y Y Y 1.36 0.05 19 Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.16 0.30 70 Y Y Y Y 1.19 0.05 23 Y Y Y As of January 2010 * SHGC = Solar Heat Gain Coefficient North-Central South-Central Southern *SHGC Any >=0.35 >=0.40 <=0.40 <=0.30 <=0.27 Y Y 0.28 U-Factor <=0.30 <=0.31 <=0.32 <=0.32 <=0.35 <=0.60 Y Y 0.24 Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Y Y Y Y Zo-e-shield 7 a Y Y 1" Climate Zone Northern Y Y 0.28 US Qualification Criteria Y Y Y Y Y Y Y 0.24 3/4" Zo-e-shield 6 w/ Argon Y Y Zo-e-shield 7 3/4" Clear Insul Y Y 1.76 3 Y 1" 3/4" Zo-e-shield 6 w/ Argon 2 Y Y Zo-e-shield 7 3/4" Insul Low-E 1 Y Y 3/4" Insul Low E w/Argon D CANADA Energy Star (2015) Y 1" 3/4" Clear Insul Over 7/8' GIA or SDL Solar Heat Gain Coefficient 3/4" Clear Insul U Value Glazing thickness Grille Option Glazing Option U-Value (metric) CANADIAN ENERGY PEFORMANCE DATA NFRC Total Unit Calculationsa Y Y Y Y Y Y Y Thermal Performance Data Select 500 Slider Windows - Single Slider (7405) ENERGY PERFORMANCE DATA Over 7/8' GIA or SDL 5/8" - 13/16" GIA 0.60 45 3/4" Insul Low-E 0.32 0.31 0.53 57 3/4" Insul Low E w/Argon 0.28 0.31 0.53 60 3/4" Bronze Low E 0.32 0.30 0.40 57 3/4" Bronze Low E w/Argon 0.28 0.29 0.40 60 3/4" Insul Low-E 240 0.32 0.19 0.29 56 3/4" Insul Low-E 240 w/Argon 0.29 0.19 0.29 60 3/4" Zo-e-shield 5 0.31 0.21 0.47 57 3/4" Zo-e-shield 5 w/ Argon 0.28 0.20 0.47 61 3/4" Zo-e-shield 5 Extreme 0.27 0.19 0.43 3/4" Zo-e-shield 5 Extreme w/ Argon 0.24 0.19 3/4" Zo-e-shield 6 3/4" Zo-e-shield 6 w/ Argon 0.29 3/4" Clear Insul N Y Y Energy R ating Condensation Resistance Rating 0.57 US Air Infiltration L/s/m2 Visible Light Transmittance 0.45 Glazing Option U-Value (metric) Solar Heat Gain Coefficient 3/4" Clear Insul Glazing thickness U Value No Grilles Grille Option NFRC Total Unit Calculations CANADIAN ENERGY PEFORMANCE DATA a 2.56 0.71 17 Y 1.82 0.71 18 Y Y 1.59 0.71 23 Y 1.82 0.71 17 Y Energy Star NC SC Y Y S CANADA Energy Star (2010) A Y Y 1.59 0.71 22 Y Y Y Y 1.82 0.71 11 Y B Y Y Y Y Y Y Y 1.65 0.71 15 Y Y Y 1.76 0.71 13 Y Y Y Y Y 1.59 0.71 16 Y Y 47 Y Y Y Y 1.53 0.71 17 Y Y 0.43 51 Y Y Y Y 1.36 0.71 21 Y Y Y Y 0.19 0.42 42 Y Y Y Y 1.65 0.71 15 Y 0.25 0.19 0.42 46 Y Y Y Y Y Y Y Y 0.45 0.51 0.54 45 0.32 0.28 0.47 57 0.28 0.28 0.47 60 3/4" Bronze Low E 0.32 0.27 0.35 57 3/4" Bronze Low E w/Argon 0.28 0.26 0.35 60 3/4" Insul Low-E 240 0.32 0.17 0.26 56 3/4" Insul Low-E 240 w/Argon 0.29 0.17 0.26 60 3/4" Zo-e-shield 5 0.31 0.19 0.42 57 3/4" Zo-e-shield 5 w/ Argon 0.28 0.18 0.42 61 3/4" Zo-e-shield 5 Extreme 0.27 0.17 0.38 3/4" Zo-e-shield 5 Extreme w/ Argon 0.24 0.17 3/4" Zo-e-shield 6 3/4" Zo-e-shield 6 w/ Argon 0.30 3/4" Clear Insul Y 1.42 0.71 20 2.56 0.71 13 Y Y 1.82 0.71 16 Y Y Y 1.59 0.71 21 Y Y Y Y 1.82 0.71 15 Y Y Y Y 1.59 0.71 20 Y Y Y Y 1.82 0.71 10 Y Y Y Y 1.65 0.71 13 Y Y Y Y 1.76 0.71 12 Y Y Y Y Y 1.59 0.71 15 Y Y 47 Y Y Y Y 1.53 0.71 16 Y Y 0.38 51 Y Y Y Y 1.36 0.71 20 Y Y 0.17 0.37 42 Y Y Y Y 1.70 0.71 12 Y 0.26 0.17 0.37 46 Y Y Y Y Y 0.45 0.45 0.47 45 3/4" Insul Low-E 0.32 0.25 0.41 57 3/4" Insul Low E w/Argon 0.28 0.25 0.41 60 3/4" Bronze Low E 0.32 0.24 0.31 57 3/4" Bronze Low E w/Argon 0.28 0.24 0.31 60 3/4" Insul Low-E 240 0.32 0.16 0.23 56 3/4" Insul Low-E 240 w/Argon 0.29 0.15 0.23 60 3/4" Zo-e-shield 5 0.31 0.17 0.37 57 3/4" Zo-e-shield 5 w/ Argon 0.28 0.17 0.37 61 3/4" Zo-e-shield 5 Extreme 0.27 0.16 0.33 3/4" Zo-e-shield 5 Extreme w/ Argon 0.24 0.16 3/4" Zo-e-shield 6 0.30 3/4" Zo-e-shield 6 w/ Argon 0.26 Y Y Y 1.48 0.71 17 2.56 0.71 10 Y Y Y Y Y Y Y Y 1.82 0.71 14 Y Y 1.59 0.71 19 Y Y Y Y 1.82 0.71 14 Y Y Y Y 1.59 0.71 19 Y Y Y Y 1.82 0.71 9 Y Y Y Y 1.65 0.71 12 Y Y Y Y 1.76 0.71 11 Y Y Y Y Y 1.59 0.71 15 Y Y 47 Y Y Y Y 1.53 0.71 15 Y Y 0.33 51 Y Y Y Y 1.36 0.71 19 Y Y 0.16 0.33 42 Y Y Y Y 1.70 0.71 12 Y 0.16 0.33 46 Y Y Y Y 1.48 0.71 17 Y Y Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Climate Zone Northern North-Central South-Central Southern U-Factor <=0.30 <=0.31 <=0.32 <=0.32 <=0.35 <=0.60 *SHGC Any >=0.35 >=0.40 <=0.40 <=0.30 <=0.27 Y Y Y Y Y Y Y Y Y 2 Y Y Y Y a As of January 2010 1 Y 3/4" Insul Low-E * SHGC = Solar Heat Gain Coefficient D Y 3/4" Insul Low E w/Argon US Qualification Criteria C CANADA Energy Star (2015) Y Y Y Y 3 Thermal Performance Data Select 500 Direct-Set Windows (7305) ENERGY PERFORMANCE DATA No Grilles 48 N NC SC S Energy R ating Condensation Resistance Rating 0.71 Air Infiltration L/s/m2 Visible Light Transmittance 0.67 Energy Star 2.56 0.05 23 CANADA Energy Star (2010) A 3/4" Insul Low-E 0.30 0.36 0.62 64 Y Y 1.70 0.05 23 Y 0.26 0.36 0.62 67 Y Y 1.48 0.05 28 Y 3/4" Bronze Low E 0.30 0.35 0.47 64 Y Y 1.70 0.05 23 Y 3/4" Bronze Low E w/Argon 0.26 0.34 0.47 67 Y Y 3/4" Insul Low-E 240 0.31 0.22 0.34 57 3/4" Insul Low-E 240 w/Argon 0.27 0.22 0.34 60 3/4" Zo-e-shield 5 0.30 0.24 0.56 65 3/4" Zo-e-shield 5 w/ Argon 0.26 0.24 0.56 3/4" Zo-e-shield 5 Extreme 0.24 0.22 0.50 3/4" Zo-e-shield 5 Extreme w/ Argon 0.21 0.22 3/4" Zo-e-shield 6 0.26 0.22 B C D CANADA Energy Star (2015) 1 Y Y Y Y Y Y 1.48 0.05 27 Y Y Y Y 1.76 0.05 14 Y Y Y Y Y 1.53 0.05 19 Y Y Y Y Y 1.70 0.05 17 Y 67 Y Y Y Y 1.48 0.05 22 Y Y 45 Y Y Y Y 1.36 0.05 23 Y Y Y 0.50 49 Y Y Y Y 1.19 0.05 27 Y Y Y 0.50 42 Y Y Y Y 1.48 0.05 20 Y Y 2 Y Y Y Y Y 0.23 0.22 0.50 46 Y Y Y Y 1.31 0.05 24 Y Y Y Y 0.23 0.22 0.44 71 Y Y Y Y 1.31 0.05 24 Y Y Y Y Y 1" Zo-e-shield 7 w/ Argon 0.19 0.22 0.44 74 Y Y Y Y 1.08 0.05 29 Y Y Y Y Y 0.45 0.60 0.64 48 2.56 0.05 19 3/4" Insul Low-E 0.30 0.33 0.56 64 Y Y 1.70 0.05 22 Y 0.26 0.32 0.56 67 Y Y 1.48 0.05 26 Y 3/4" Bronze Low E 0.30 0.31 0.42 64 Y Y 1.70 0.05 21 Y 3/4" Bronze Low E w/Argon 0.26 0.31 0.42 67 Y Y 3/4" Insul Low-E 240 0.31 0.20 0.31 57 3/4" Insul Low-E 240 w/Argon 0.27 0.20 0.31 60 3/4" Zo-e-shield 5 0.30 0.22 0.50 65 3/4" Zo-e-shield 5 w/ Argon 0.26 0.22 0.50 3/4" Zo-e-shield 5 Extreme 0.24 0.20 0.45 3/4" Zo-e-shield 5 Extreme w/ Argon 0.21 0.20 3/4" Zo-e-shield 6 0.27 3/4" Zo-e-shield 6 w/ Argon Y Y Y Y Y Y Y 1.48 0.05 26 Y Y Y Y 1.76 0.05 13 Y Y Y Y Y 1.53 0.05 18 Y Y Y Y Y 1.70 0.05 15 Y 67 Y Y Y Y 1.48 0.05 20 Y Y 45 Y Y Y Y 1.36 0.05 22 Y Y Y 0.45 49 Y Y Y Y 1.19 0.05 25 Y Y Y 0.20 0.44 42 Y Y Y Y 1.53 0.05 18 Y Y Y Y Y Y Y Y 0.24 0.20 0.44 46 Y Y Y Y 1.36 0.05 22 Y Y Y Y Y 0.24 0.20 0.40 71 Y Y Y Y 1.36 0.05 22 Y Y Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.20 0.40 74 Y Y Y Y 1.19 0.05 25 Y Y Y Y Y 0.45 0.54 0.57 48 2.56 0.05 15 3/4" Insul Low-E 0.30 0.29 0.50 64 Y Y Y 1.70 0.05 19 Y 0.26 0.29 0.50 67 Y Y Y 1.48 0.05 24 Y 3/4" Bronze Low E 0.30 0.28 0.37 64 Y Y Y 1.70 0.05 19 Y 3/4" Bronze Low E w/Argon 0.26 0.28 0.37 67 Y Y Y 1.48 0.05 24 Y 3/4" Insul Low-E 240 0.31 0.19 0.28 57 Y Y Y 1.76 0.05 12 Y 3/4" Insul Low-E 240 w/Argon 0.27 0.18 0.28 60 Y Y Y Y 1.53 0.05 17 Y 3/4" Zo-e-shield 5 0.30 0.20 0.45 65 Y Y Y Y 1.70 0.05 14 Y Y Y Y Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.26 0.20 0.45 67 Y Y Y Y 1.48 0.05 19 Y Y 3/4" Zo-e-shield 5 Extreme 0.24 0.19 0.40 45 Y Y Y Y 1.36 0.05 21 Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.21 0.18 0.40 49 Y Y Y Y 1.19 0.05 24 Y Y Y 3/4" Zo-e-shield 6 0.27 0.18 0.40 42 Y Y Y Y 1.53 0.05 17 Y Y 3/4" Zo-e-shield 6 w/ Argon Y Y Y Y Y 0.24 0.18 0.40 46 Y Y Y Y 1.36 0.05 21 Y Y Y Y Y 0.24 0.18 0.36 71 Y Y Y Y 1.36 0.05 21 Y Y Y Y Y 1" Zo-e-shield 7 w/ Argon 0.21 0.18 0.36 74 Y Y Y Y 1.19 0.05 24 Y Y Y Y Y US Qualification Criteria As of January 2010 * SHGC = Solar Heat Gain Coefficient Climate Zone Northern North-Central South-Central Southern U-Factor <=0.30 <=0.31 <=0.32 <=0.32 <=0.35 <=0.60 *SHGC Any >=0.35 >=0.40 <=0.40 <=0.30 <=0.27 Y Y Zo-e-shield 7 Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Y Y 1" a Y Y Zo-e-shield 7 3/4" Insul Low E w/Argon Y Y 1" 3/4" Clear Insul Y Y Zo-e-shield 7 3/4" Insul Low E w/Argon 3 Y 1" 3/4" Clear Insul 5/8" - 13/16" GIA 0.45 US 3/4" Insul Low E w/Argon 3/4" Zo-e-shield 6 w/ Argon Over 7/8' GIA or SDL Solar Heat Gain Coefficient 3/4" Clear Insul U Value Glazing thickness Grille Option Glazing Option U-Value (metric) CANADIAN ENERGY PEFORMANCE DATA NFRC Total Unit Calculationsa Y Y Thermal Performance Data Select 500 Sliding Patio Doors (7704) ENERGY PERFORMANCE DATA Over 7/8' GIA or SDL 5/8" - 13/16" GIA No Grilles Solar Heat Gain Coefficient Visible Light Transmittance Condensation Resistance Rating U-Value (metric) Air Infiltration L/s/m2 Energy R ating 0.45 0.61 0.64 45 2.56 0.86 19 0.31 0.33 0.56 56 1.76 0.86 20 3/4" Insul Low E w/Argon 0.28 0.33 0.56 59 1.59 0.86 24 Y 3/4" Bronze Low E 0.31 0.31 0.41 56 1.76 0.86 19 Y Glazing Option U Value 3/4" Clear Insul 3/4" Insul Low-E Glazing thickness Grille Option NFRC Total Unit Calculations CANADIAN ENERGY PEFORMANCE DATA a US Energy Star 3/4" Bronze Low E w/Argon 0.28 0.31 0.41 59 3/4" Insul Low-E 240 0.32 0.20 0.31 56 Y CANADA Energy Star A B Y 1.59 0.86 23 Y 1.82 0.86 11 Y Y Y 3/4" Insul Low-E 240 w/Argon 0.28 0.20 0.31 59 Y 1.59 0.86 16 Y 3/4" Zo-e-shield 5 0.31 0.22 0.50 57 Y 1.76 0.86 14 Y 3/4" Zo-e-shield 5 w/ Argon 0.27 0.22 0.50 60 Y 1.53 0.86 19 Y Y 3/4" Zo-e-shield 5 Extreme 0.26 0.20 0.46 45 Y 1.48 0.86 19 Y Y Y Y Y Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.20 0.46 49 3/4" Zo-e-shield 6 0.33 0.22 0.49 54 3/4" Zo-e-shield 6 w/ Argon 0.28 0.22 0.49 58 3/4" Clear Insul 0.45 0.54 0.56 45 3/4" Insul Low-E 0.31 0.29 0.49 56 3/4" Insul Low E w/Argon 0.28 0.29 0.49 59 Y 1.31 0.86 22 1.87 0.86 11 1.59 0.86 17 2.56 0.86 15 Y 1.76 0.86 18 Y Y 1.59 0.86 21 Y Y 3/4" Bronze Low E 0.31 0.28 0.36 56 Y 1.76 0.86 17 3/4" Bronze Low E w/Argon 0.28 0.27 0.36 59 Y 1.59 0.86 20 Y 3/4" Insul Low-E 240 0.32 0.18 0.27 56 Y 1.82 0.86 10 Y 3/4" Insul Low-E 240 w/Argon 0.28 0.18 0.27 59 Y 1.59 0.86 15 Y 3/4" Zo-e-shield 5 0.31 0.20 0.44 57 Y 1.76 0.86 13 Y Y Y Y 3/4" Zo-e-shield 5 w/ Argon 0.27 0.19 0.44 60 Y 1.53 0.86 17 Y Y 0.26 0.18 0.40 45 Y 1.48 0.86 18 Y Y Y Y Y 0.23 0.18 0.40 49 3/4" Zo-e-shield 6 0.35 0.20 0.43 54 1.31 0.86 21 1.99 0.86 8 3/4" Zo-e-shield 6 w/ Argon 0.30 0.19 0.43 58 3/4" Clear Insul 0.45 0.47 0.49 45 1.70 0.86 13 2.56 0.86 11 3/4" Insul Low-E 0.31 0.26 0.42 56 3/4" Insul Low E w/Argon 0.28 0.25 0.42 59 Y 1.76 0.86 16 Y Y 1.59 0.86 19 Y 3/4" Bronze Low E 0.31 0.24 0.31 56 3/4" Bronze Low E w/Argon 0.28 0.24 0.31 59 Y 1.76 0.86 15 Y Y 1.59 0.86 19 3/4" Insul Low-E 240 0.32 0.16 0.24 Y 56 Y 1.82 0.86 9 Y 3/4" Insul Low-E 240 w/Argon 0.28 0.16 0.24 59 Y 1.59 0.86 14 Y Y Y Y Y Y 3/4" Zo-e-shield 5 0.31 0.17 0.38 57 1.76 0.86 11 3/4" Zo-e-shield 5 w/ Argon 0.27 0.17 0.38 60 Y 1.53 0.86 16 Y Y 3/4" Zo-e-shield 5 Extreme 0.26 0.16 0.35 45 Y 1.48 0.86 16 Y Y 3/4" Zo-e-shield 5 Extreme w/ Argon 0.23 0.16 0.35 49 Y 1.31 0.86 20 Y Y 3/4" Zo-e-shield 6 0.35 0.17 0.37 54 1.99 0.86 6 3/4" Zo-e-shield 6 w/ Argon 0.30 0.17 0.37 58 1.70 0.86 12 a Total Unit calculations are derived from computer simulations that are then verified by 3rd party testing in accordance with NFRC 100-04. Energy Star Criteria As of January 2010 * SHGC = Solar Heat Gain Coefficient Climate Zone All Zones U-Factor <=0.32 *SHGC <=0.30 Y Y Y Y Y Y 3/4" Zo-e-shield 5 Extreme 3/4" Zo-e-shield 5 Extreme w/ Argon C Y Y D
Similar documents
PlyGem Windows
double hung windows feature operating upper and lower sash. Our easy to operate sash system both sash effortlessly tilt in and are removeable for easy cleaning of the outside of your
More informationProduct Catalog - Lincoln Windows
traditional window look with today’s modern exterior options. Create your hybrid window package by picking a traditional trim/casing and then choose an aluminum clad or vinyl clad sash. This unique...
More information