Available Shanks

Transcription

Available Shanks

PRODUCT
CATALOGUE
2010
HOW TO ORDER OUR
PRODUCTS
It is easy to order our products
Just follow our 3 easy steps -
Step 1
Find the right tools in our catalogue
for your drilling applications.
Need help?
We encourage you to contact your
distributor or Halco for technical
support.
Step 2
Note the Part Number.
Step 3
Contact your dealer or local branch
listed on the back cover.
That’s it! Your order is placed and
we are already working actively
to satisfy your requirements.
Not sure what hammer and
bit you need?
Contact your local distributor or our
sales-team for advice. With over
60 years of experience, our trained
customer support team is dedicated
to providing our customers the level of
support they need when they need it.
Distributed by:
Halco Rock Tools
PO Box 25, West lane
Southowram, Halifax, HX3 9TW
Tel: + 44 (0) 1422 399900
Fax: + 44 (0) 1422 330186
Email: [email protected]
Halco America Inc. (USA)
3501 S. FM Hwy. 1417
Denison, TX 75020
Tel: + 1 903 337 4190
Fax: + 1 903 337 4191
Email: salesusa@halcorocktools.
com Halco Australia
2 Reid Road, Perth International Airport,
Perth WA61054
Tel: + 61 8 9248 4144
Fax: + 61 8 9248 4155
Email:[email protected]
2
HAMMER & SIM-CAS
QUICK REFERENCE
1¨ RANGE
PART NUMBER
600251
10¨ RANGE
HAMMER
SHANK
PAGE
DOMINATOR 100
HALCO DOMINATOR 100
16
2¨ RANGE
PART NUMBER
PART NUMBER
600248
HAMMER
SHANK
PAGE
DOMINATOR 1000
SD10
70
12¨ RANGE
HAMMER
SHANK
PAGE
HAMMER
SHANK
PAGE
600169
MACH 20
HALCO - BOX DIN 50MM
18
600108
MACH 120
A100-15 / SD12
72
600209
MACH 20
HALCO - BOX DIN 40MM
18
600110
MACH 122
A100-15 / SD12
74
600142
MACH 132
IR DHD 112
76
3¨ RANGE
PART NUMBER
HAMMER
SHANK
PAGE
600143
MACH 142
IR DHD 112S
78
600080
MACH 303
HALCO MACH 303
20
600321
SUPER DOMINATOR 1200
IR QL 120
80
600199
DOMINATOR 350
IR DHD 3.5
22
RC RANGE
PART NUMBER
600393
DOMINATOR 375
MD 3.5
24
PART NUMBER
HAMMER
SHANK
PAGE
600394
DOMINATOR 375
IR DHD 3.5
24
600339
RC4/412
HALCO RC 412
82
600341
RC4/412
HALCO RC 412
82
4¨ RANGE
HAMMER
SHANK
PAGE
600371
RC5
HALCO RC 5
84
600070
MACH 44
HALCO MACH 44
26
600372
RC5
HALCO RC 5
84
600382
DOMINATOR 450
HALCO SUPER DOMINATOR 450
28
SIM-CAS RANGE
PART NUMBER
600384
DOMINATOR 450
IR DHD 340
28
PART NUMBER
HAMMER
SHANK
PAGE
600224
SUPER DOMINATOR 400
HALCO MACH 44
30
650344
SIM-CAS 33
HALCO MACH 303
88
600226
SUPER DOMINATOR 400
A34-15
30
650096
SIM-CAS 33
IR DHD 3.5
88
600258
SUPER DOMINATOR 400
IR DHD 340A
30
650899
SIM-CAS 44
HALCO MACH 44
90
600382
SUPER DOMINATOR 450
HALCO SDOM 450
32
650919
SIM-CAS 44
A35-15
90
600384
SUPER DOMINATOR 450
IR DHD 340
32
650008
SIM-CAS 44
IR DHD 340
90
5¨ RANGE
650345
SIM-CAS 55
HALCO MACH 50
92
PART NUMBER
SIM-CAS 55
A43-15
92
HAMMER
SHANK
PAGE
650916
600046
MACH 50
HALCO MACH 50
34
650086
SIM-CAS 55
IR DHD 350
92
600120
DOMINATOR 500
HALCO MACH 50
36
650346
SIM-CAS 66
HALCO MACH 60
94
600135
DOMINATOR 500
A43-15
36
650917
SIM-CAS 66
A53-15
94
600267
SUPER DOMINATOR 500
IR DHD 350R
38
650085
SIM-CAS 66
IR DHD 360
94
600293
SUPER DOMINATOR 550HD
IR DHD 350R
40
650340
SIM-CAS SUPER 66
HALCO MACH 60
96
42
650921
SIM-CAS SUPER 66
A53-15
96
44
650975
SIM-CAS SUPER 66
IR DHD 360
96
653243
SIM-CAS SUPER 66 HD
IR DHD 360
98
600294
SUPER DOMINATOR 550 HD QL 50
IR QL 50
GW 500 HD
6¨ RANGE
HAMMER
SHANK
PAGE
653244
SIM-CAS SUPER 66 HD
IR DHD 380
98
600035
MACH 60
HALCO MACH 60
46
650895
SIM-CAS 88
HALCO MACH 80
100
600151
DOMINATOR 600
HALCO MACH 60
48
650920
SIM-CAS 88
A63-15
100
SIM-CAS 88
IR DHD 380
100
PART NUMBER
600094
DOMINATOR 600
IR DHD 360
48
650087
600152
DOMINATOR 600
A53-25
48
653153
SIM-CAS SUPER 88
HALCO MACH 80
102
600272
SUPER DOMINATOR 600
IR DHD 360
50
653156
SIM-CAS SUPER 88
A63-15
102
600213
SUPER DOMINATOR 650
IR DHD 360
52
653154
SIM-CAS SUPER 88
IR DHD 380
102
600233
SUPER DOMINATOR 650
A53-15
52
600316
SUPER DOMINATOR 650 HD QL 60
IR QL 60
54
GW 600
56
7¨ RANGE
PART NUMBER
600243
HAMMER
SHANK
PAGE
DOMINATOR 750
A63-15 / SD8
58
8¨ RANGE
PART NUMBER
HAMMER
SHANK
PAGE
600310
DOMINATOR 800
HALCO MACH 80
60
600308
DOMINATOR 800
A63-15 / SD8
60
600309
DOMINATOR 800
IR DHD 380
60
600245
DOMINATOR 850
IR QL 80
62
600311
DOMINATOR 880
A63-15 / SD8
64
600312
DOMINATOR 880
IR DHD 380
64
600261
DOMINATOR 880DW
IR DHD 380
66
600396
DOMINATOR 800 LE
IR QL 80
68
halcorocktools.com
3
INTRODUCTION TO HALCO
Halco Rock Tools Ltd is a world class
manufacturer of down-the-hole (DTH)
drilling equipment. Halco pioneered
the development and distribution of
DTH hammers in the 1950’s, and now
our precision engineered range of
performance hammers and drill bits
are used globally. Predominantly used
for mining, DTH is preferred in other
applications such as construction,
quarrying, formation sampling, and the
drilling of water wells.
Halco Rock Tools, in close
co-operation with Stenuick Freres,
actually established the development
and distribution of the down-the-hole
hammer in the 1950’s throughout the
UK, Australia, New Zealand, Africa
and India.
Produced for more than 60 years, our
products continue to be regarded as
one of the most reliable and durable
available today. This is due to our
commitment to our customers’ needs,
design expertise, and rigorous product
testing in extreme drilling conditions.
Halco Rock Tools is located in
Halifax, UK.
HAMMER OVERVIEW
What is DTH and how it is used?
The “Down-the-Hole” or DTH hammer
is used for drilling holes through a wide
range of rock types, the variety of which
continues to extend well beyond the
original conception of early blast hole
drilling.
“Down-the-Hole” refers to where the
hammer action occurs when compared
to drifter hammers, which hammer on
top of the drill string. The DTH hammer
piston always makes direct contact with
the drill bit and there is generally no loss
of transmitted energy as the hammer
drills deeper, as is the case with drifter
(top hammer) rigs.
What is Reverse Circulation?
Reverse circulation hammers can in
most instances carry out continuous
sample collection in a fraction of the
time necessary with conventional or
wireline coring.
Why is the DTH approach preferred
today?
Although DTH hammers started life
in quarries, they are now appreciated
throughout the drilling industry where
they have become the preferred option
due to their significant advantages over
other systems, in particular –
•
•
•
•
•
•
4
Capable of drilling in almost all
rocks,hard, medium to soft
Penetration rates that can outstrip
other systems
Reduced costs
Straighter/cleaner holes
Wide range of hole sizes available,
without high expenditure
Quieter than other percussive
systems
Prior to DTH technology, blast hole
drilling was normally carried out with
drifter equipment. Water well drilling in
hard formations was done by cable tool
rigs or rotary rigs using roller cone bits.
However, because drifter drilling
becomes progressively slower with
more depth, unlike DTH hammers, and
because the latter can drill in one day
what a cable tool rig takes weeks to
complete, the quarrying, waterwell,
site investigation, civil engineering and
mining industries throughout the world
have become more and more aware of
the advantages to be gained from using
DTH hammers. This is not only as an
alternative to drifters but because of the
higher performances when compared
to conventional rotary drilling. The DTH
hammer concept proved so popular
that established manufacturers of drifter
steels, bits and accessories, followed
our lead and developed their own range
of DTH hammers and bits.
How is DTH better?
Penetration rates with DTH hammers
are almost directly proportional to air
pressure therefore doubling the air
pressure, will result in approximately
double the penetration. The first ever
hammers were of “valved” design
and had an internal liner. This valved
technology, together with compressor
availability limited the air pressure
capability of the early hammers which
were incapable of withstanding air
pressures above 12 bar (170psi).
The valve itself had operational
problems because hammer malfunction
occurred when large volumes of water
were passed through the hammers or
if grit entered the hammer. Modern
hammers are generally valveless in
design with fewer internal parts requiring
little maintenance.
The removal of the valve has eliminated
the operational problems previously
experienced. Modern hammers are also
of a rigid construction enabling them to
withstand air pressures as high as 30
bar (435 psi). Further development of
DTH hammers will be in terms of their
design will be related to achieving lower
user drilling costs through increased
rates of penetration and longer life in the
hole. Increases in penetration rates will
require the investigation of delivering yet
higher air operating pressures to the
hammer as in conventional designs, or
the use of alternative power sources
such as water or oil.
To achieve longer life of the components
of the hammer, research of wear and
impact resistant materials not normally
associated with traditional hammer
manufacture, is essential. Water
powered hammers are being developed
for use in underground mines.
Although performance results are
encouraging, the design of the hammer
is limited to use on sites where large
amounts of water are available and
can be tolerated and most importantly
handled and cleaned for return to
the hammer. Hydraulic oil powered
hammers have been tested in some
quarries but these need a specially
adapted drill rig, drill tubes and
coupling system.
Spillage and potential contamination
of the ground is a major consideration.
Furthermore, a separate air supply is
needed in order to flush the hole.
Because of these limitations, water and
oil powered hammers are slow to gain
ground and air driven hammers still have
the competitive edge. The immediate
opportunity for DTH hammers is in
developing their use for applications
normally drilled using other methods,
for example shallow oil and gas field
development, shallow wide hole piling,
continuous drilling and casing systems,
reverse circulation chip sampling, mole
drilling and applications where holes
in excess of 900mm (36”) diameter are
required in mining, civil engineering and
construction applications..
halcorocktools.com
5
DRILL BIT OVERVIEW
What are “Down-the-hole” drill bits and
how are they used?
“Down-the-hole” (DTH) drill bits are
used with “Down-the-hole” hammers
for drilling holes through a wide range
of rocks types. In conjunction with DTH
hammers, drill bits are designed with a
splined drive for rotating the bit in the
ground. Drill bits are available in different
sizes and different styles so they can
drill a wide range of hole sizes.
In many cases, the need to sharpen the
drill bit was eliminated with the arrival of
the button bit and the improved cutting
action provided increased drilling rates
particularly in hard rocks.
How have “Down-the-hole” drill bits
developed?
Rapid advances in drill bit technology
have also occurred throughout the last
40 years. The first type of drill bit used
with down the hole hammers was a
“cross bit” design.
Applications Overburden Systems
Soft soil is normally drilled with augers
or by the rotary method but DTH
hammers have adapted to soft
conditions by being able to drill and
case the hole simultaneously using
an eccentric bit which can be
withdrawn on completion of the bore
hole, leaving the casing in situ, thus
preventing hole collapse.
Four chisel shaped lengths of tungsten
carbide were brazed into the bit body.
The action of brazing preset stresses
within the drill bit thereby limiting its life.
A further disadvantage of the cross bit
was that the majority of the carbide was
situated around the centre of the bit
face and not towards the outer edge
of the drill bit where there is the most
rock to cut.
In the late 1960’s however, the
button bit was introduced and this
was a landmark in the progress of
DTH equipment which led to bit lives
previously unheard of.
The button bit design eliminated the
primary shortcomings of the cross bit.
Cylindrical button inserts are precision
ground to extremely close tolerances
and pressed into the drill bit as an
interference fit. This resulted in improved
carbide insert retention by eliminating
brazing stresses and other defects
associated with brazing and braze
materials. Button inserts are distributed
more efficiently than cross bit inserts
by providing more cutting power
where it is needed at the outer edge
of the drill bit face.
6
While the cross bit design is still used
in some rotary and drifter applications
where the rock is very soft, the button
bit is now used in virtually every
DTH application.
The systems achieve this by enabling
the down the hole drill string and casing
to be lowered simultaneously. A down
the hole hammer is used to which is
fitted a driver and eccentric bit.
DRILL BIT SELECTION GUIDE
As with Halco hammers it is crucial that
you choose the right drill bit otherwise it
will cost you both in time and money.
We pride ourselves on having a
comprehensive range on drill bits on
offer so you can be sure that you will
definitely find a suitable bit for any
project you are undertaking.
Our carburised drill bits are among the
best in the world providing outstanding
performance and durability.
We produce all our drill bits at our
specialized plant where they are made
out of high quality nickel chrome alloy
steel, carburised and heat-treated to
offer extra protection against wear and
fatigue. Every hole in the bit head is
machined to within microns and fitted
with carbide inserts which provide the
cutting action of the rock.
We have three different bit heads on
offer, Convex, Flat Face and Concave,
also with three different inserts we
guarantee we have
a drill bit that can tackle any challenge
and rock face formation. The two most
important factors in choosing the right
drill bit are productivity and reliability.
For soft to medium rock formations
where penetration rates are high the
ballistic and semi-ballistic inserts
coupled with flat face or concave bit
heads are more suitable.
If the rock formation is on the hard to
very hard side, it is more advisable to
use a domed insert with convex head
this will result in a longer drill bit life.
“We guarantee to have
a drill bit that can tackle
any challenge”
halcorocktools.com
7
DRILL BIT OVERVIEW
Head Designs
8
Inserts Types
Flat Face
Ballistic Inserts
Alternative design for all rock conditions
especially fractured and fissured rocks
and changing formations.
Suitable for soft and medium compact
low abrasive rocks producing large cuttings.
Not suitable for badly fractured rocks.
Concave
Domed Inserts
Alternative design for all rock
conditions particularly deep hole
drilling can improve hole alignment as
a result of inverted pilot.
Strong rugged shape for high performance
and good service life in all conditions
particularly suitable for very hard abrasive rocks
and deep hole drilling.
Convex
Semi-Ballistic Inserts
Strong design for all conditions especially
hard abrasive rock.Good balance of fast
drilling and long service life.
Suitable for all soft and medium rock conditions
including fractured and fissured rocks.
Dominator 100
Mach 20
Mach 303
168mm
(6.61”)
165mm
(6.50”)
170mm
(6.69”)
181mm
(7.12)
181mm
(7.12”)
10 Spline
6 Spline
8 Spline
8 Spline
8 Spline
SD 450
45mm
(1.77”)
60mm
(2.36”)
Mach 44
56mm
(2.2”)
DHD 340A
Cop 44
DHD 4
49mm
(1.93”)
56mm
(2.2”)
MD 3.5
Mach 50
58.5mm
(2.3”)
52mm
(2.05”)
DHD 3.5
SD 5
210mm
(8.27”)
245mm
(9.65”)
210mm
(8.27”)
266mm
(10.47”)
260mm
(12.68”)
12 Spline
8 Spline
8 Spline
8 Spline
8 Spline
DHD 350R
Cop 54
DHD 5
64mm
(2.52”)
QL 50
TD 50
Cop 54GE
52.5mm
(2.07”)
Mach 60
51mm
(2.00”)
SD 6
51mm
(2.00”)
DHD 360
DHD 6
Cop 64
261mm
(10.28”)
240mm
(9.45”)
320mm
(12.60”)
322mm
(12.68”)
306mm
(12.05”)
8 Spline
12 Spline
8 Spline
8 Spline
8 Spline
QL 60
TD60/65/70
Cop 64G
60mm
(2.36”)
Mach 80
51mm
(2.00”)
SD 8
56.5mm
(2.22”)
DHD 380
Cop 84
DHD 8
50mm
(1.97”)
QL 80
TD 80
254mm
(10.00”)
350mm
(13.78”)
320mm
(12.60”)
350mm
(13.78”)
332mm
(13.07”)
12 Spline
8 Spline
8 Spline
10 Spline
16
Spline
SD 10
55mm
(2.17”)
DHD 112
52.5mm
(2.07”)
DHD 112S
52.5mm
(2.07”)
SD 12
44.5mm
(1.95”)
QL 120
365mm
(14.01”)
491mm
(19.33”)
636mm
(25.04”)
470mm
(18.50”)
492mm
(19.37”)
8 Spline
8 Spline
Pin Drive
12 Spline
Pin Drive
8 Spline
12
Spline
58.5mm
(2.3”)
52mm
(2.05”)
51mm
(2.00”)
54mm
(2.13”)
69.5mm
(2.74”)
9
HAMMER SELECTION GUIDE
Choosing the right hammer is essential to
your productivity and operating cost.
We have four different types
of hammers:
All Halco hammers are built to last,
manufactured to an exceptional standard,
our hammers provide
the outstanding performance and
productivity required today by
our customers.
MACH RANGE
This is a proven hammer that has
been around for over 30 years and is
designed for all kinds of drilling conditions
but excels in overburden drilling due to the
high frequency with less blow energy for
drilling through unstable ground conditions.
This hammer can drill smaller diameters
than the standard range. This range
of hammer is ideal for civil engineering.
Versatility and variety are key to Halco
products and you can be assured that all
Halco hammers are suitable for a wide
range of rock drilling applications.
Every hammer is constructed at our stateof-the-art manufacturing plant using the
highest quality heat treated nickel chrome
alloy steels. Our processes meet the
requirements for ISO9001:2008 standards.
It is a Halco imperative that every hammer
we produce surpasses
our customers expectations and
we’re constantly striving to improve
our service and product quality.
DOMINATOR RANGE
The Dominator is a higher performance
hammer than the Mach Range ideally
suitable for medium to higher air pressures
in blast-hole applications.
This design is simple with fewer
components, which makes servicing and
on-site maintenance easy. With a range of
heavy duty models on offer this extends
the life of the hammer considerably.
SUPER DOMINATOR RANGE
The Super Dominator is the latest hammer
in the range, specially designed for working
at extreme high working pressures up to
500 psi with high penetration rates ideal
for blast-hole and waterwell applications.
The Super Dominator Range has a simple
design with no make-up required. This
hammer has an external non-return-valve
for easy inspection and service and is
available with a 12 spline drive system to
reduce shank breakage.
GW RANGE
The new GW series of DTH hammers from
Halco Rock Tools offer breakthrough
performance in challenging Geothermal
and Waterwell applications. The robust non
ported piston design dramatically improves
both the piston and internal component life
when drilling under a column of water.
A built in choke facility allows the driller
to adjust the volume of air through the
hammer to optimise cuttings evacuation.
GW500 and GW600 hammers are fitted
with a reversible cylinder to maximise
operating life and are suitable for operation
at air pressures up to 30
bar (435 psi).
10
HARD ROCK
Can be used but does
not result in optimum
productivity
productivity
Can be used with
satisfactory results
Can be used with
Ideally suited for
that formation
Can be used with
MEDIUM ROCK
Ideally suited for
that formation
Ideally suited for
that formation
Can be used with
productivity
SOFT ROCK
11
Ballistic
Inserts
Semi
Ballistic
Inserts
Domed
Inserts
HAMMER SERVICE AND
REPAIR KITS
12
Hammer Type
Model Number
SK
RK
Dominator 100
600251
SK31
RK54
Mach 20
600169
SK18
RK30
Mach 20
600209
SK18
RK30
Mach 303
600080
SK01
RK01
Dominator 350
600199
SK27
RK47
Dominator 375
600393
SK64
RK101
Dominator 375
600394
SK64
RK98
Super Dominator 450
600382
SK59
RK93
Super Dominator 450
600384
SK59
RK102
Super Dominator 400
600224
SK30
RK52
Super Dominator 400
600226
SK30
RK42
Super Dominator 400
600258
SK45
RK83
Mach 44
600070
SK 02
RK02
Mach 50
600046
SK03
RK04
Dominator 500
600120
SK16
RK25
Dominator 500
600135
SK16
RK26
Super Dominator 500
600267
SK48
RK72
Super Dominator 550 HD
600293
SK49
RK73
600294
SK40
RK77
GW500 HD
600401
SK65
RK103
GW500 HD
600390
SK65
RK103
Super Dominator 600
600272
Sk37
Rk65
Super Dominator 650
600213
Sk28
Rk48
Super Dominator 650
600233
Sk44
Rk71
Mach 60
600035
Sk07
Rk10
Dominator 600
600151
Sk05
Rk07
Dominator 600
600094
Sk21
Rk35
Dominator 600
600152
Sk06
Rk08
600316
Sk43
Rk81
GW600
600397
SK68
RK105
GW600 HD
600398
SK68
RK122
Dominator 750
600243
Sk23
Rk37
Dominator 800
600310
Sk25
Rk78
Dominator 800
600308
Sk51
Rk79
Dominator 800
600309
Sk25
Rk64
Dominator 800 LE
600396
SK71
RK120
Dominator 850
600245
Sk32
Rk55
Dominator 880
600311
Sk51
Rk79
Dominator 880
600312
Sk25
Rk64
Dominator 880DW
600261
Sk25
Rk64
Dominator 1000
600248
Sk29
Rk50
Mach120
600108
Sk12
Rk19
Mach122
600110
Sk12
Rk19
Mach132
600142
Sk14
Rk23
Mach142
600143
Sk15
Rk24
Super Dominator 1200
600373
Sk47
Rk76
Rc412
600339
Sk52
Rk86
Rc412
600341
Sk52
Rk86
Rc5
600371
Sk56
Rk89
Rc5
600372
Sk56
Rk89
halcorocktools.com
13
BIT CATCHER ASSEMBLY
Broken bits can cost a great deal in time, efficiency
and revenue, but the Halco Bit Catcher System
prevents the need for the added time and expense
of difficult ‘fishing’ procedures to save the hole.
Designed to fit a wide range of Halco’s class leading
standard down the hole hammers, the Bit Catcher
System provides an effective retention method
should the drill bit break in its most susceptible
area, above the head of the bit. If a breakage should
occur in this area the head of the bit is retained within
the Bit Catcher System and not lost down the hole.
The Halco Bit Catcher System uses a specially
designed Chuck and Drill Bit arrangement to ensure
there is no loss of drilling performance from either
the hammer or the Drill Bit while providing the driller
with peace of mind and reassurance that should
a breakage occur the Drill Bit will be securely retained
within the catcher system.
14
Catcher Bit Assemblies
Size
6”
Shank Type
Number
653403
653400
QL60
2
7”
8"
653401
653404
653400
653351
653428
653347
653405
653429
653430
653424
653431
653432
653402
653433
653434
653435
653436
653437
653383
653438
653411
653382
653415
653419
653406
653439
653440
653441
653407
653442
653443
653409
653408
653416
653417
653418
653444
654445
653446
653447
653448
SD8
DHD380
SD8
QL80
10"
SD10
12"
SD12
3
4
4
DHD112
4
DHD112S
QL120
Bit Part
Inch
6 3/8"
6 3/4"
6 1/4"
6 3/8"
6 1/2"
7 7/8"
8 3/4"
8 7/8"
9 7/8"
10" (UK)
8 3/4"
8 7/8"
8 3/4” (UK)
8 3/4”
8 7/8”
11” (UK)
11"
12” (UK)
15” (UK)
11 7/8” (UK)
12” (UK)
12 ¼”
12 3/8"
12.450”
14 ¾”
15” (UK)
15”
17 ¼” (UK)
17 ½”
18” (UK)
18 ¾” (UK)
12 ¼”
12 3/8”
12.450”
14 ¾”
15"
17 ½”
20” (UK)
22” (UK)
24” (UK)
12 ¼”
12 3/8”
12.450”
14 ¾”
17 ½”
Diameter
mm
Design
162mm
Concave
170mm
Concave
159mm
Concave
162mm
Concave
165mm
Concave
200mm
Concave
222mm
Concave
225mm
Concave
251mm
Concave
254mm
Concave
222mm
Concave
225mm
Concave
222mm
Concave
222mm
Concave
225mm
Concave
280mm
Concave
280mm
Concave
305mm
Concave
381mm
Concave
300mm
Concave
305mm
Concave
311mm
Concave
314mm
Concave
316mm
Concave
375mm
Concave
381mm
Concave
381mm
Concave
438mm
Concave
445mm
Concave
457mm
Concave
476mm
Concave
311mm
Concave
314mm
Concave
316mm
Concave
375mm
Concave
381mm
Concave
445mm
Concave
508mm
Concave
559mm
Concave
610mm
Concave
311mm
Concave
314mm
Concave
316mm
Concave
375mm
Concave
445mm
Concave
Type
3/4" Domes
3/4" Domes
3/4" Domes
3/4" Domes
3/4" Domes
3/4" Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Domes
Hammer / Bit Catcher Compatibility
Hammer Type
Super Dominator 600
Super Dominator 650
Dominator 600
Super Dominator
650 HD QL60
Dominator 750
Dominator 800
Dominator 880
Dominator 880 DW
Dominator 850
Dominator 1000
Mach 120
Mach 122
Mach 132
Mach 142
Hammer
Shank Type Number
DHD360 600272-BC
DHD360 600213-BC
DHD360 600094-BC
Chuck
Number
604491
604491
604491
SK
SK37
SK28
SK21
RK
RK108
RK109
RK121
QL60
600313-BC
604490
SK43
RK110
SD8
DHD380
SD8
DHD380
SD8
DHD380
QL80
SD10
SD12
SD12
DHD112
DHD112S
QL120
600243-BC
600309-BC
600308-BC
600312-BC
600311-BC
600261-BC
600245-BC
600248-BC
600108-BC
600110-BC
600142-BC
600143-BC
600373-BC
604565
604465
604522
604465
604522
604465
604528
604499
604495
604495
604533
604547
604551
SK23
SK25
SK51
SK25
SK51
SK25
SK32
SK29
SK12
SK12
SK14
SK15
SK47
RK111
RK112
RK113
RK112
RK113
RK112
RK114
RK115
RK116
RK116
RK117
RK118
RK119
Catcher Outside Dia
MM
Inches
150mm
5.905"
186mm
195mm
7.323"
7.677"
208mm
244mm
287mm
8.189"
9.606"
11.299"
385mm
298mm
15.157"
11.732"
Bit Catcher Hammers are supplied with
a Catcher Chuck - which is also sold separately.
Catcher Bits are supplied with a shroud and 4 Lugs.
halcorocktools.com
15
1¨
DOMINATOR 100
The Dominator 100 is designed for small diameter
drilling operations and its superior drilling performance
makes it at least 50% faster than its nearest competitor.
One piece top-adaptor reduces
internal parts. No make up required.
Revised chamber volumes
and cycle timing to optimize
performance.
The valveless design of the Dominator 100 provides
high performance at both low and high pressures. The
Dominator 100 has a strong robust design withstands
heavy duty applications. A N.R.V. (Non-Return-Valve) is
fitted into the Dominator 100 to prevent flooding where
ground water is present.
Suitable for operation at air pressures
of 100 - 250 psi (7 - 17 bar).
Drilling diameters of 55 - 64mm (2 1/8 - 2 1/2”).
Air Consumption
Simplified piston geometry for
improved balance and location
within the cylinder.
Air Consumption (CFM)
350
300
CFM
250
200
150
100
50
0
100
150
200
250
300
PSI
Figures are based on theoretical data
Available Shanks
Halco Dominator 100
Halco shank reduces contact
stresses and wear rates. With full
chuck support.
16
350
1
2
3
4
5
6
7
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Recommended Maximum Thrust
Dominator 100
600251
Halco Dominator 100
40mm DIN 405 6 TPI BOX
38mm (1.500”)
7 Kg
47mm (1.7/8”)
772mm (30.3/8”)
120 Kg (264 lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8
9
Description
Thread Protector
Snap Ring
N.R.V. Seat
O’Ring
N.R.V.
N.R.V. Spring
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
Bit Retaining Ring
Chuck Spacer
Chuck
Protective Cap
Dominator 100
Halco
600251
Part Number
200005
783041
603448
768174
603447
760100
603413
768168
768175
603410
603450
783037
603449
603412
603411
741047
Service Kit
Repair Kit
SK31
RK54
Foot Valve
F/V tool - Body
F/V tool - Pusher
603208
603233
603232
Drill Bits
10
Part
Number
mm
Inch
Halco Dominator 100 Shank
650017
55
2.1/6
650032
64
2.1/2
Face
Design
Type
Buttons
Qty/Dia
Weight
(Kg)
Flat
Flat
Domed
Domed
6 x 11mm / 2 x 9mm
6 x 11mm / 3 x 9mm
1.16
1.37
11
12
13
14
15
16
halcorocktools.com
17
2¨
Integral N.R.V. (Non-Return-Valve)
to prevent flooding when drilling
in water.
MACH 20
The valved design of the Mach 20 provides high
performance at low pressure. A non return valve is fitted
to prevent flooding when drilling in water. The Mach
20 has a strong robust design to withstand heavy duty
applications.
The Mach 20 is fitted with adjustable chokes to
give three levels of air volumes for different drilling
conditions.
The unique drill bit design for Mach 20 does not use
footvalves which reduces the possibility of hammer
failure. Mach 20 shank has a long service life and
reduces contact stresses and wear rates.
Suitable for operation at air pressures of
100 - 250 psi ( 7- 17 bar).
Solid piston with liner support.
Drilling diameters of 70 - 76mm (2 3/4 - 3”).
Air Consumption
Mach 20 Air Consumption
900
800
700
Guide bush fitted for
centralising piston.
CFM
600
Solid Plug
3mm Plug
No Plug
500
400
300
200
100
0
100
150
200
250
300
PSI
Available Shanks
Halco Mach 20
18
350
400
450
500
1
2
3
4
5
6
7
8
9
10
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Mach 20
600169
Halco Mach 20
50mm DIN 405 6TPI BOX
48mm (1.890”)
13 Kg
62mm (2.7/16”)
840mm (33”)
150 Kg (330 lbs)
Mach 20
600209
Halco Mach 20
48mm (1.890”)
13 Kg
62mm (2.7/16”)
840mm (33”)
150 Kg (330 lbs)
Parts List
Hammer Type
Shank
Model Number
Item
Description
1
Thread protector
2
Top-Adaptor
3
Wear spacer (Optional)
4
N.R.V.
5
N.R.V. spring
6
N.R.V. housing
7
Valve Centraliser
8
Valve
Solid bleed plug (Standard)
9
3mm bleed plug (Optional)
10
Air Distributor
11
Liner
12
Cylinder
13
Piston
14
Piston Guide bush
15
Bottom spacer
16
Bit retaining rings
17
Chuck lock ring
18
Chuck
19
Protective cap
Mach 20
Halco
600169
600209
Part Number
200002
602715
602726
602727
760111
602720
602724
602725
732025
602736
602719
602717
602714
602718
602723
602722
602721
602729
602716
741013
200005
602837
602726
602727
760111
602720
602724
602725
732025
602736
602719
602717
602714
602718
602723
602722
602721
602729
602716
741013
SK18
RK30
SK18
RK30
11
SK
RK
Service Kit
Repair Kit
Drill Bits
12
Part
Diameter
Number
mm
Inch
Halco Shank
650952
70
2.3/4
650953
76
3
650954
76
3
Face
Design
Type
Buttons
Qty/Dia
Weight
(Kg)
Flat
Flat
Flat
Domed
Domed
Semi-Ballistic
4 x 9mm / 6 x 11mm
5 x 9mm / 6 x 11mm
5 x 9mm / 6 x 11mm
2.4
2.5
2.5
13
14
15
16
17
18
19
halcorocktools.com
19
3¨
Top-adaptor with integral N.R.V.
(Non-Return-Valve) replaceable
air distributor.
MACH 303
Mach 303 is a general purpose hammer for small hole
drilling used in applications such as seismic, geological
survey, micro-piling, floor, wall and roof-bolting or for
blast-holes where environmental considerations limit
hole size and blasting procedures. The Mach 303 uses
less air than most other 3 inch hammers in its range
which allows you to use a smaller compressor and
gain in economy. The hammer is suitable for drilling
at a wide range of air pressures in both soft and hard
rock conditions.
Suitable for operation at air pressures of 100 - 350 psi
(7 - 24 bar).
Air Consumption
600
500
CFM
400
300
200
100
0
0
100
200
300
PSI
Revised chamber volumes and cycle
timing to optimize performance.
20
Available Shanks
Halco Mach 303
400
500
600
Hammer Overview
1
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
2
Parts List
3
4
5
6
7
8
9
10
13
11
12
Mach 20
600169
Halco Mach 20
48mm (1.890”)
13 Kg
62mm (2.7/16”)
840mm (33”)
150 Kg (330 lbs)
Hammer Type
Shank
Model Number
Item
Description
1
Thread protector
2
Top-Adaptor
3
Wear spacer (Optional)
4
N.R.V.
5
N.R.V. spring
6
N.R.V. housing
7
Valve Centraliser
8
Valve
Solid bleed plug (Standard)
9
3mm bleed plug (Optional)
10
Air Distributor
11
Liner
12
Cylinder
13
Piston
14
Piston Guide bush
15
Bottom spacer
16
Bit retaining rings
17
Chuck lock ring
18
Chuck
19
Protective cap
SK
RK
Mach 20
600209
Halco Mach 20
48mm (1.890”)
13 Kg
62mm (2.7/16”)
840mm (33”)
150 Kg (330 lbs)
Mach 20
Halco
600169
600209
Part Number
200002
602715
602726
602727
760111
602720
602724
602725
732025
602736
602719
602717
602714
602718
602723
602722
602721
602729
602716
741013
200005
602837
602726
602727
760111
602720
602724
602725
732025
602736
602719
602717
602714
602718
602723
602722
602721
602729
602716
741013
SK18
RK30
SK18
RK30
Service Kit
Repair Kit
Drill Bits
Part
Diameter
Number
mm
Inch
Halco Shank
650952
70
2.3/4
650953
76
3
650954
76
3
Face
Design
Type
Buttons
Qty/Dia
Weight
(Kg)
Flat
Flat
Flat
Domed
Domed
Semi-Ballistic
4 x 9mm / 6 x 11mm
5 x 9mm / 6 x 11mm
5 x 9mm / 6 x 11mm
2.4
2.5
2.5
14
15
17
16
18
19
halcorocktools.com
21
3¨
air distributor.
DOMINATOR 350
Dominator 350 hammer is a high performance hammer
for medium to hard rock conditions. Dominator 350
has no internal liner which allows a larger piston
diameter for greater blow energy.
Dominator 350 has fewer parts than any other 3 inch
hammer in the market. This allows an easy maintenance
and servicing with only a few simple tools required.
Suitable for operation at air pressures of 100 - 350 psi
(7 - 24 bar).
Drilling diameters of 90mm - 104mm (3 1/2 - 4 3/32”).
Air Consumption
Dominator 350 Air Consumption
700
600
CFM
500
400
300
200
100
0
100
150
200
250
300
PSI
Available Shanks
IR 3.5
22
350
400
450
500
Hammer Overview
1
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Recommended Minimum Thrust
2
Parts List
3
4
5
6
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
7
8
9
10
11
12
13
14
15
16
17
18
19
14
11
12
Dominator 350
600199
IR 3.5
2.3/8 Api Reg Pin
63mm (2.480”)
23 Kg
81mm (3.3/16”)
832mm (32.3/4”)
150 Kg (330 lbs)
300 Kg (660 lbs)
Description
Thread Protector
Top-Adaptor
O’Ring
N.R.V.
N.R.V. Spring
N.R.V. Housing
Disk Springs
Thrust Washer
O’Ring
Air Distributor
Air Distributor Removal Tool
Washer
Snap Ring
Piston
Cylinder
Snap Ring
Bit Retaining Rings
Chuck Spacer
Chuck
End Cap
Dominator 350
IR 3.5
600199
Part Number
200111
602980
768098
602328
760100
602971
760094
602972
768033
603108
603007
602979
783035
603107
602974
783036
602976
602977
602978
741045
Service Kit
Repair Kit
SK27
RK47
Foot Valve
F/V tool - Body
F/V tool - Pusher
602922
603061
601659
Drill Bits
13
Part
Diameter
Number
mm
Inch
Ir 3.5 Shank - Dominator/Dart 350
650622
90
3.1/2
650623
90
3.1/2
650609
95
3.3/4
650620
95
3.3/4
650610
100
3.15/16
650621
100
3.15/16
650624
104
4.3/32
Face
Design
Type
Buttons
QTY/DIA
Weight
(Kg)
Convex
Convex
Convex
Convex
Convex
Convex
Convex
Semi-Ballistic
Domed
Semi-Ballistic
Domed
Ballistic
Domed
Domed
13 x 11mm
13 x 11mm
15 x 11mm
15 x 11mm
15 x 11mm
15 x 11mm
8 x 13mm/ 8 x 11mm
3.8
3.8
4.0
4.0
4.5
4.5
4.9
15
16
17
18
halcorocktools.com
23
3¨
Internal N.R.V. (Non-Return-Valve)
to prevent flooding when drilling
in water.
DOMINATOR 375
Dominator 375 hammer gives up to 25% increase in
performance compared to Dominator 350 and Dart 350.
This exceptional hammer is simple, robust and has a
high penetration rate. The Dominator 375 has an integral
N.R.V. (Non-Return-Valve) with an adjustable air bleed
system to adjust air volume, this hammer has a liner and
solid piston design.
This hammer has few internal parts which makes on site
servicing easy with minimum tools needed. The MD 3.5
shank drill bit can be fitted for improved service life and
heavy duty applications.
100 - 350 psi (7 - 24 bar).
Air Consumption
Solid piston with liner support.
700
600
CFM
500
400
300
200
100
0
100
150
200
250
Available Shanks
IR DHD 3.5
MD 3.5
24
300
PSI
350
400
450
500
Hammer Overview
1
2
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Dominator 375
600393
MD 3.5
2.3/8 API Reg Pin
64mm (2.520”)
24.kg
85mm (3.35”)
885mm (34.84”)
150 Kg (330 lbs)
300 Kg (660 lbs)
Dominator 375
600394
IR 3.5
2.3/8 API Reg Pin
64mm (2.520”)
24.kg
85mm (3.35”)
885mm (34.84”)
150 Kg (330 lbs)
300 Kg (660 lbs)
Parts List
3
4
5
6
7
8
9
10
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Top-Adaptor
3
N.R.V. Plug - Solid
N.R.V. Plug 1/8”
N.R.V. Plug 3/16”
4
N.R.V.
5
N.R.V. Spring
6
Shim- 4.9mm
Shim - 5.3mm
Shim - 5.7mm
7
Compression Spring
8
Air Distributor
9
O’Ring
10
Liner
11
Cylinder
12
Piston
13
Snap Ring
14
Bit Retaining Band
15
Bit Retaining Rings
16
Chuck
17
End Cap
Dominator 375
MD 3.5 HD
600393
Dominator 375
IR 3.5
600394
200111
604371
604480
604481
604482
604378
760154
602634
602635
602636
760107
604461
768099
604459
604458
604460
783051
792040
604457
604456
741045
200111
604371
604480
604481
604482
604378
760154
602634
602635
602636
760107
604461
768099
604459
604458
604460
783051
792040
604462
604375
741045
Service Kit
Repair Kit
SK64
RK101
SK64
RK98
Foot Valve
F/V tool - Body
F/V tool - Pusher
602922
603061
601659
602922
603061
601659
11
Drill Bits
12
13
14
15
Part
Number
Ir 3.5 Shank
650622
650623
650609
650620
650610
650621
650624
MD 3.5 Shank
653354
653349
mm
Diameter
Inch
Face
Design
Type
Buttons
QTY/DIA
Weight
(Kg)
90
90
95
95
100
100
104
3.1/2
3.1/2
3.3/4
3.3/4
3.15/16
3.15/16
4.1/8
Convex
Convex
Convex
Convex
Convex
Convex
Convex
Semi-Ballistic
Domed
Semi-Ballistic
Domed
Ballistic
Domed
Domed
13 x 11mm
13 x 11mm
15 x 11mm
15 x 11mm
15 x 11mm
15 x 11mm
8 x 13mm/ 8 x 11mm
3.8
3.8
4.0
4.0
4.5
4.5
4.9
95
100
3.3/4
3.15/16
Convex
Flat Faced
Parabolic
Domed
11 x 14mm
16 x 11mm
5.0
5.2
16
17
halcorocktools.com
25
4¨
air distributor.
MACH 44
The Mach 44 is a general purpose hammer suitable
for all rock conditions at a wide range of air pressures.
The Mach 44 has a proven track record of performance
and reliability. The high frequency of the Mach 44
makes it ideal when using overburden systems for
broken or unstable ground conditions.
100 - 350 psi (7 - 24 bar).
Air Consumption
900
800
700
600
CFM
500
400
300
200
100
0
100
150
200
250
300
PSI
Available Shanks
Halco Mach 44
Revised chamber volumes and
cycle timing to optimize
performance.
26
350
400
450
500
1
2
Hammer Overview
Hammer Type Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Mach 44
600070
Halco Mach 44
2.3/8 API REG PIN
65mm (2.560”)
35.3 Kg
95mm (3.3/4”)
1000mm (39.3/8”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
Parts List
3
4
5
6
7
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Description
Thread Protector
Top-Adaptor
O Ring
N.R.V.
N.R.V. Spring
N.R.V. Seat
N.R.V. Finger
Shim - 0.5mm
Shim - 1.0mm
Shim - 1.5mm
Compression Ring
O Ring
Air Distributor
Cylinder
Snap Ring
Piston
Snap Ring
Bit Retaining Ring
Containment Band
Chuck Spacer
Chuck
End Cap
Mach 44
Halco
600070
Part Number
200111
601632
768040
602330
760084
601778
601717
601640
601720
601721
601635
768050
601868
601865
783014
602456
783014
601945
792037
601431
601439
741019
SK
RK
Service Kit
Repair Kit
SK02
RK02
Foot Valve
F/V tool - body
F/V tool - pushert
601641
601643
601644
8
9
10
11
12
13
14
Drill Bits
15
16
17
18
19
Part
Diameter
Number mm
Inch
Halco Mach 44
650788
108
4.1/4
650987
108
4.1/4
653248
108
4.1/4
650931
110
4.5/16
653106
110
4.5/16
650932
115
4.1/2
650969
115
4.1/2
653136
115
4.1/2
653249
115
4.1/2
650933
120
4.3/4
650466
127
5
650073
130
5.1/8
650444
140
5.1/2
650445
150
5.7/8
Face
Design
Type
Buttons
Qty/dia
Convex
Convex
Concave
Convex
Convex
Convex
Convex
Convex
Concave
Convex
Convex
Convex
Convex
Convex
Domed
Semi-Ballistic
Domed/ Ballistic
Domed
Semi-Ballistic
Domed
Semi-Ballistic
Parabolic
Domed / Ballistic
Domed
Domed
Ballistic
Domed
Domed
13 x 13mm
15 x 13mm
8 x 11mm D / 8 x 11mm B
15 x 13mm
18 x 11mm
8 x 14mm / 8 x 13mm
16 x 13mm
17 x 14mm
8 x 13mm D / 8 x 13mm B
8 x 14mm / 8 x 13mm
16 x 13mm
16 x 13mm
17 x 13mm
17 x 13mm
Over
Size
Weight
(Kg)
Y
Y
Y
Y
9.5
9.1
9.1
9.6
9
9.7
9.6
9.5
9.6
10
11
10.9
12.5
13.5
20
halcorocktools.com
27
4¨
DOMINATOR 450
internal parts. No make up
required. External N.R.V. for
easy maintenance.
The Super Dominator 450 has been specifically
designed for high production drilling in blast-hole
applications.
Revised cylinder porting to
maximise air flow efficiency.
The hammer is robust and has few parts, making it user
friendly and reliable. The Super Dominator 450 is fitted
with a non-return-valve in top-adaptor for quick and
easy inspection and maintenance operations. A fixed
air distributor in the top-adaptor body means the Super
Dominator 450 requires no shimming which simplifies
servicing. The Super Dominator 450 has no liner which
increases the piston power output.
The Super Dominator 450 utilizes Halco’s all new 12
spline shank which has simplistic robust geometry
combined with increased drive contact area. The Super
Dominator 450 can be also used with the IR340A/Atlas
Copco Cop 44.
of 100 - 350 psi (7 - 24 bar).
Drilling diameters of 110mm - 127mm (4 5/16 - 5”).
Air Consumption
SDOM 450 Air Consumption
900
800
700
600
CFM
performance.
500
400
300
200
100
0
100
150
200
250
300
350
PSI
Available Shanks
Halco Super Dominator 450 (NT4)IR
340A/Atlas Copco Cop 44
28
400
450
500
1
2
3
4
5
6
7
8
9
10
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Super Dominator 450
600382
Halco Super Dominator 450
2.3/8” API REG PIN
65mm (2.560”)
38.5 Kg
100.5mm (3.956”)
914mm (35.984”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
Super Dominator 450
600384
IR DHD 340
65mm (2.560”)
38.5 Kg
100.5mm (3.956”)
914mm (35.984”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
Super Dominator 450
600382
Super Dominator 450
600384
Parts List
Super Dominator 450
Model
Item
Description
1
Thread Protector
2
Snap Ring
3
N.R.V. Seat
4
O’Ring
5
Non Return Valve
6
N.R.V. Spring
7
Top-Adaptor
8
O’Ring
9
O’Ring
10
Cylinder
11
Piston
12
Bit Guide Bush
13
O’Ring
14
Bit Retaining Ring
15
Chuck Lock Ring
16
Chuck
17
End Cap
Part Number
200111
783049
603919
768187
603918
760142
603946
768190
768190
604387
604392
604314
768189
603948
602733
603939
741019
200111
783049
603919
768187
603918
760142
603946
768190
768190
604387
604392
604414
602733
604415
741046
Foot Valve
F/V tool - body
F/V tool - pusher
603951
604020
601644
601773
601643
601644
Service Kit
Repair Kit
SK59
RK93
SK59
RK102
11
Drill Bits
Part
Diameter
Face
Number
mm
Inch
Design
653217
110
4.5/16
Convex
653223
110
4.5/16
Convex
653209
115
4.1/2
Convex
653197
127
5
Convex
653268
127
5
Concave
12
13
14
15
16
17
Type
Ballistic
Domed
Ballistic
Ballistic
Domed
Buttons
Qty/Dia
14 x 14mm
14 x 14mm
15 x 14mm
18 x 14mm
8 x 13mm + 8 x 14mm
Ir DHD 340A Shank/Atlas Copco Cop 44
650950
108 4.1/4 Convex
Domed
15 x 13mm
650968
108 4.1/4 Convex
Semi-Ballistic
15 x 13mm
650949
110 4.5/16 Convex
Domed
15 x 13mm
650961
110 4.5/16 Convex
Semi-Ballistic
15 x 13mm
653091
110 4.5/16 Convex
Parabolic
14 x 14mm
650526
115 4.1/2 Convex
Domed
16 x 13mm
650625
115 4.1/2 Concave Domed/Semi-Ballistic 8 x 14mm D/6 x 13mm S/B
650955
115 4.1/2
Flat
Domed
8 x 14mm/10 x 13mm
650967
115 4.1/2 Convex
Semi-Ballistic
16 x 13mm
650680
120 4.3/4 Concave Domed/Semi-Ballistic
8 x 13mm/8 x 13mm
650612
121 4.3/4 Convex
Semi-Ballistic
14 x 13mm
650611
127
5
Concave
Domed
16 x 13mm
650966
127
5
Concave
Semi-Ballistic
16 x 13mm
650013
127
5
Convex
Domed
16 x 13mm
650614
130 5.1/8 Concave Domed/Semi-Ballistic 8 x 14mmD/8 x 13mm S/B
650675
130 5.1/8 Convex
Semi-Ballistic
16 x 13mm
653094
140 5.1/2 Concave
Domed
9 x 16mm/9 x 14mm
Over
Size
Weight
(Kg)
Y
Y
7.96
7.96
8.13
9.05
8.75
Y
Y
Y
Y
Y
Y
8
10
8.1
8.1
8.5
8.2
8.2
8.3
8.5
10
9.5
9.5
9.6
10.6
10.1
9.2
11.8
halcorocktools.com
29
4¨
air distributor.
SUPER DOMINATOR 400
The Super Dominator 400 is a heavy duty hammer
with thicker 98mm (3.8”) diameter outer components
to provide an extended service life in abrasive
conditions and is also suitable for waterwell drilling.
The Super Dominator 400 is designed for maximum
performance at higher pressures.
100 - 350 psi (7 - 24 bar).
performance.
Air Consumption
Super Dominator 400 Air Consumption
900
800
700
CFM
600
500
400
300
200
100
0
100
150
200
250
300
PSI
Available Shanks
Halco Mach 44
A34-15/SD4
IR DHD 340A
30
350
400
450
500
Hammer Overview
1
Hammer Type
Part Number
Shank
2
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
600224
Halco
Mach 44
2.3/8 API REG PIN
65mm (2.560”)
38 Kg
98mm (3.7/8”)
1042mm (41”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
Super Dominator 400
600226
Sandvik Mission
A34 -15/SD4
2.3/8 API REG PIN
65mm (2.560”)
38 Kg
98mm (3.7/8”)
1042mm (41”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
600258
Ingersoll Rand
DHD 340A
2.3/8 API REG PIN
65mm (2.560”)
38 Kg
98mm (3.7/8”)
1042mm (41”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
Parts List
3
4
5
6
7
8
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Top-Adaptor
3
O Ring
4
N.R.V.
5
N.R.V. Spring
Shim - 4.9mm
6
Shim - 5.3mm
Shim - 5.7mm
7
Compression Spring
8
Air Distributor
9
O Ring
10
Cylinder
11
Piston
12
Snap Ring
13
Containment Band
14
Bit Retaining Ring
15
Chuck Lock Ring
16
Chuck
17
End Cap
200111
603215
768040
602633
760108
602634
602635
602636
760107
603266
768050
603390
603396
783029
792037
603793
602733
603273
741019
Super Dominator 400
A34-15 / SD4
600226
Part Number
200111
603215
768040
602633
760108
602634
602635
602636
760107
603266
768050
603390
603441
783029
792037
603439
602733
603274
741046
Service Kit
Repair Kit
SK30
RK52
SK30
RK42
SK45
RK83
Foot Valve
F/V tool - body
F/V tool - pushert
601641
601643
601644
601842
601848
601644
601773
601643
601644
SK
RK
Halco-SP
600224
DHD340A
600258
200111
603215
768040
602633
760108
602634
602635
602636
760107
603266
768050
603384
603383
783029
603586
602733
603218
741046
Drill Bits
9
10
11
12
13
14
15
16
17
Part
Diameter
Face
Buttons
Number
mm
Inch
Design
Type
Qty/dia
Super Dominator 400 Halco Shank
650580
108
4.1/4
Concave
Ballistic
14 x 13mm
650788
108
4.1/4
Convex
Domed
13 x 13mm
650987
108
4.1/4
Convex
Semi-Ballistic
15 x 13mm
653248
108
4.1/4
Concave
Domed / Ballistic
8 x 11mm D/8 x 11mm
650931
110
4.5/16
Convex
Domed
15 x 13mm
653106
110
4.5/16
Convex
Semi-Ballistic
18 x 11mm
650932
115
4.1/2
Convex
Domed
8 x 14mm / 8 x 13mm
650936
115
4.1/2
Convex
Ballistic
16 x 13mm
650969
115
4.1/2
Convex
Semi-Ballistic
16 x 13mm
653136
115
4.1/2
Convex
Parabolic
17 x 14mm
653249
115
4.1/2
Concave
Domed/Ballistic
8 x 13mm D/8 x 13mm
650933
120
4.3/4
Convex
Domed
8 x 14mm / 8 x 13mm
650466
127
5
Convex
Domed
16 x 13mm
650925
127
5
Convex
Semi-Ballistic
16 x 13mm
650073
130
5.1/8
Convex
Ballistic
16 x 13mm
650444
140
5.1/2
Convex
Domed
17 x 13mm
650445
150
5.7/8
Convex
Domed
17 x 13mm
650950
108
4.1/4 Convex
Domed
15 x 13mm
650968
108
4.1/4 Convex
Semi-Ballistic
15 x 13mm
650949
110 4.5/16 Convex
Domed
15 x 13mm
650961
110 4.5/16 Convex
Semi-Ballistic
15 x 13mm
653091
110 4.5/16 Convex
Parabolic
14 x 14mm
650526
115
4.1/2 Convex
Domed
16 x 13mm
650625
115
4.1/2 Concave Domed/Semi-Ballistic
8 x 14mm D/6 x 13mm S/B
650955
115
4.1/2
Flat
Domed
8 x 14mm/10 x 13mm
650967
115
4.1/2 Convex
Semi-Ballistic
16 x 13mm
650680
120
8 x 13mm/8 x 13mm
650612
121
4.3/4 Convex
Semi-Ballistic
14 x 13mm
650611
127
5
Concave
Domed
16 x 13mm
650966
127
5
Concave
Semi-Ballistic
16 x 13mm
650013
127
5
Convex
Domed
16 x 13mm
650614
130
8 x 14mmD/8 x 13mm S/B
650675
130
5.1/8 Convex
Semi-Ballistic
16 x 13mm
653094
140
5.1/2 Concave
Domed
9 x 16mm/9 x 14mm
Over Weight
Size
(Kg)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
9.5
9.5
9.1
9.1
9.6
9
9.7
9.7
9.6
9.5
9.6
10
11
10.7
10.9
12.5
13.5
8
10
8.1
8.1
8.5
8.2
8.2
8.3
8.5
10
9.5
9.5
9.6
10.6
10.1
9.2
11.8
halcorocktools.com
31
4¨
SUPER DOMINATOR 450
easy maintenance.
The Super Dominator 450 has been specifically
designed for high production drilling in blast-hole
applications.
performance.
The hammer is robust and has few parts, making it user
friendly and reliable. The Super Dominator 450 is fitted
with a non-return-valve in top-adaptor for quick and
easy inspection and maintenance operations. A fixed
air distributor in the top-adaptor body means the Super
Dominator 450 requires no shimming which simplifies
servicing. The Super Dominator 450 has no liner which
increases the piston power output.
The Super Dominator 450 utilizes Halco’s all new
12 spline shank which has simplistic robust geometry
combined with increased drive contact area. The Super
Dominator 450 can be also used with the IR340A/Atlas
Copco Cop 44.
of 100 - 350 psi (7 - 24 bar).
Drilling diameters of 110mm - 127mm (4 5/16 - 5”).
Air Consumption
SDOM 450 Air Consumption
Revised cylinder porting to
maximise air flow efficiency.
900
800
700
CFM
600
500
400
300
200
100
0
100
150
200
250
300
350
PSI
Halco Super Dominator 450 shank
reduces contact stresses and
wear rates.
Available Shanks
Halco Super Dominator 450 (NT4)
IR 340A/Atlas Copco Cop 44
32
400
450
500
1
2
3
4
5
6
7
8
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Super Dominator 450
600382
65mm (2.560”)
38.5 Kg
100.5mm (3.956”)
914mm (35.984”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
Super Dominator 450
600384
IR DHD 340
65mm (2.560”)
38.5 Kg
100.5mm (3.956”)
914mm (35.984”)
250 Kg (550 lbs)
500 Kg (1100 lbs)
Parts List
Super Dominator 450
Shank
Model Number
Item
Description
1
Thread Protector
2
Snap Ring
3
N.R.V. Seat
4
O’Ring
5
Non Return Valve
6
N.R.V. Spring
7
Top-Adaptor
8
O’Ring
9
O’Ring
10
Cylinder
11
Piston
12
Bit Guide Bush
13
O’Ring
14
Bit Retaining Ring
15
Chuck Lock Ring
16
Chuck
17
End Cap
Halco
600382
200111
783049
603919
768187
603918
760142
603946
768190
768190
604387
604392
604314
768189
603948
602733
603939
741019
Super Dominator 450
IR 340A/Cop44
600384
Part Number
200111
783049
603919
768187
603918
760142
603946
768190
768190
604387
604392
604414
602733
604415
741046
9
10
Foot Valve
F/V tool - body
F/V tool - pusher
603951
604020
601644
601773
601643
601644
Service Kit
Repair Kit
SK59
RK93
SK67
RK102
11
Drill Bits
12
13
14
15
16
17
Part
Diameter
Face
Number
mm
Inch
Design
653217
110
4.5/16
Convex
653223
110
4.5/16
Convex
653209
115
4.1/2
Convex
653197
127
5
Convex
653268
127
5
Concave
Type
Ballistic
Domed
Ballistic
Ballistic
Domed
Buttons
Qty/Dia
14 x 14mm
14 x 14mm
15 x 14mm
18 x 14mm
8 x 13mm + 8 x 14mm
650950
108 4.1/4 Convex
Domed
15 x 13mm
650968
108 4.1/4 Convex
Semi-Ballistic
15 x 13mm
650949
110 4.5/16 Convex
Domed
15 x 13mm
650961
110 4.5/16 Convex
Semi-Ballistic
15 x 13mm
653091
110 4.5/16 Convex
Parabolic
14 x 14mm
650526
115 4.1/2 Convex
Domed
16 x 13mm
650625
115 4.1/2 Concave Domed/Semi-Ballistic 8 x 14mm D/6 x 13mm S/B
650955
115 4.1/2
Flat
Domed
8 x 14mm/10 x 13mm
650967
115 4.1/2 Convex
Semi-Ballistic
16 x 13mm
650680
120 4.3/4 Concave Domed/Semi-Ballistic
8 x 13mm/8 x 13mm
650612
121 4.3/4 Convex
Semi-Ballistic
14 x 13mm
650611
127
5
Concave
Domed
16 x 13mm
650966
127
5
Concave
Semi-Ballistic
16 x 13mm
650013
127
5
Convex
Domed
16 x 13mm
650614
130 5.1/8 Concave Domed/Semi-Ballistic 8 x 14mmD/8 x 13mm S/B
650675
130 5.1/8 Convex
Semi-Ballistic
16 x 13mm
653094
140 5.1/2 Concave
Domed
9 x 16mm/9 x 14mm
Over
Size
Weight
(Kg)
Y
Y
7.96
7.96
8.13
9.05
8.75
Y
Y
Y
Y
Y
Y
8
10
8.1
8.1
8.5
8.2
8.2
8.3
8.5
10
9.5
9.5
9.6
10.6
10.1
9.2
11.8
halcorocktools.com
33
5¨
Top-adaptor with internal N.R.V.
air distributor.
MACH 50
The Mach 50 is a general purpose hammer suitable for
all rock conditions at a wide range of air pressures. The
hammer is fitted with a reversible cylinder to prolong the
service life. Mach 50 is versatile and reliable, requiring
only a few simple tools for servicing and maintenance.
This hammer is most suited for use with the Sim-Cas
Overburden system because of the high frequency of
the piston/cycle.
Reversible cylinder.
of 100 - 350 psi (7 - 24 bar).
Drilling diameters of 127mm - 165mm (5 - 6 1/2”).
Air Consumption
1400
1200
1000
CFM
800
600
400
200
0
100
150
200
250
300
PSI
performance.
34
Available Shanks
Halco Mach 50
350
400
450
500
1
2
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Mach 50
600046
Halco Mach 50
3.1/2” Api Reg Pin
90mm (3.544”)
54 Kg
114mm (4.5”)
1012mm (40”)
400 Kg (900 Lbs)
900 Kg (1980 Lbs)
Parts List
3
4
5
6
7
8
9
10
11
Model
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Sk
rk
12
13
Mach 50
Halco
600046
Description
Thread Protector
Top-Adaptor
O’Ring
Non Return Valve
N.r.v. Spring
N.r.v. Finger
Shim
Make Up Ring
Air Distributor
O’Ring
Snap Ring
Piston
Cylinder
Snap Ring
Spacer
Bit Retaining Ring
Chuck Spacer
Chuck
End Cap
201701
601698
768043
602285
760084
601702
601706
601700
601699
768101
783013
601695
601694
783013
601705
602117
601603
601602
741020
Service Kit
Repair Kit
Sk03
Rk04
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601843
601847
601708
Drill Bits
14
15
16
17
Part
Diameter
Number
mm
Inch
Halco Mach 50
650461
127
5
650717
127
5
650913
135
5.5/16
650578
140
5.1/2
650989
140
5.1/2
650990
146
5.3/4
650463
150
5.7/8
650464
165
6.1/2
Face
Design
Type
Convex
Concave
Flat
Convex
Concave
Concave
Convex
Convex
Domed
Ballistic
Semi-Ballistic
Domed
Domed
Domed
Domed
Domed
Buttons
Qty / Dia
13 x 16mm
8 x 16mm / 8 x 13mm
9 x 16mm / 9 x 13mm
14 x 16mm
9 x 16mm / 9 x 14mm
8 x 18mm / 7 x 16mm
14 x 16mm
16 x 16mm
Over
Size
Weight
(Kg)
Y
Y
15.0
15.0
16.0
15.5
17.0
17.8
18.0
18.5
18
19
halcorocktools.com
35
5¨
easy maintenance.
DOMINATOR 500
Dominator 500 a class leader in performance,
is suitable for drilling at a wide range of air pressures,
excelling at high working pressures. Dominator 500 has
a one piece top-adaptor with N.R.V. (Non-Return-Valve)
fitted for easy inspection and service, with integral
finger to reduce maintenance and eliminate shimming.
Dominator 500 has no liner which increases the piston
blow energy and reduces part required.
The Dominator 500 can be used for waterwell, shallow
gas and oil applications.
Dominator 500 is simple to maintain and to service with
only few simple tools required with a recommended
minimum bit size of 127mm (5”).
of 100 - 435 psi (7 - 30 bar).
Air Consumption
1400
1200
1000
800
CFM
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
Mach 50
Sandvik Mission A43-15/SD5
36
350
400
450
500
1
Hammer Overview
Hammer Type
Part Number
Shank
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Dominator 500
600120
Halco
Mach 50
90mm (3.544”)
58 Kg
118mm (4.65”)
980mm (38.60”)
400 Kg (900 Lbs)
900 Kg (1980 Lbs)
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Dominator 500
600135
Sandvik Mission
A43-15
90mm (3.544”)
58 Kg
118mm (4.65”)
980mm (38.60”)
400 Kg (900 Lbs)
900 Kg (1980 Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Snap Ring
3
N.r.v. Seat
4
O’Ring
5
N.r.v.
6
N.r.v. Spring
7
Top-Adaptor
8
O’Ring
9
O’Ring
10
Cylinder
11
Piston
12
Snap Ring
13
Bit Retaining Ring
14
Chuck Spacer
15
Chuck
16
End Cap
Sk
rk
Dominator 500
Halco
600120
A43-15 (SD5)
600135
Part Number
201701
783028
602703
768144
602330
760084
602704
768091
768043
602457
602459
783025
602430
602433
602458
741020
201701
783028
602703
768144
602330
760084
602704
768091
768043
602457
602459
783025
602562
602433
602561
741020
Service Kit
Repair Kit
Sk16
Rk25
Sk16
Rk26
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601843
601847
601708
601843
601847
601708
Part
Diameter
Number
mm
Inch
Halco Mach 50
653061
127
5
650461
127
5
650717
127
5
650758
135
5.5/16
650913
135
5.5/16
650578
140
5.1/2
650989
140
5.1/2
650990
146
5.3/4
650463
150
5.7/8
650464
165
6.1/2
Face
Design
Type
Concave
Convex
Concave
Convex
Flat
Convex
Concave
Concave
Convex
Convex
Domed
Domed
Ballistic
Domed
Semi-Ballistic
Domed
Domed
Domed
Domed
Domed
Part
Diameter
Face
Number
mm
Inch
Design
Sandvik Mission Shank (A43-15/sd5)
650771
140
5.1/2
Concave
653095
152
6
Concave
653096
165
6.1/2
Concave
Type
Domed
Domed
Domed
Buttons
Qty / Dia
8 x 13mm / 8 x 16mm
13 x 16mm
8 x 16mm / 8 x 13mm
14 x 16mm
9 x 16mm / 9 x 13mm
14 x 16mm
9 x 16mm / 9 x 14mm
8 x 18mm / 7 x 16mm
14 x 16mm
16 x 16mm
Button
Qty / Dia
15 x 16mm
16 x 16mm
10 x 16mm / 8 x 20mm
Over
Size
Weight
(Kg)
Y
Y
16.0
15.0
15.0
15.5
16.0
15.5
17.0
17.8
18.0
18.5
Over
Size
Weight
(Kg)
15.7
17.7
19.3
16
halcorocktools.com
37
5¨
SUPER DOMINATOR 500
required. External N.R.V. for easy
maintenance.
performance.
Super Dominator 500 is a class leader in performance
and is suitable for drilling at a wide range of air
pressures, excelling at high working pressures.
The Super Dominator 500 has a one piece top-adaptor
with N.R.V. (Non-Return-Valve) fitted for easy inspection
and service, with integral finger to reduce maintenance
and eliminate shimming. The Super Dominator 500 has
no liner which increases the piston blow energy and
reduces part required.
Super Dominator 500 is ideal for blast hole drilling
applications.
Super Dominator 500 is simple to maintain and
to service with only few simple tools required.
of 100 - 435 psi (7 - 30 bar).
Air Consumption
1400
1200
1000
CFM
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
IR DHD 350R
38
350
400
450
500
1
2
3
4
5
6
7
8
9
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Super Dominator 500
600267
Ingersoll Rand
Dhd 350R
90mm (3.544”)
58 Kg
118mm (4.65”)
975mm (38.40”)
400 Kg (900 Lbs)
900 Kg (1980 Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Sk
rk
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
N.r.v.
N.r.v. Spring
N.r.v. Shield
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
Bit Retaining Ring
Chuck Lock Ring
Chuck Spacer
Chuck
End Cap
Super Dominator 500
Dhd350R
600267
Part Number
201701
783028
603510
768144
603554
760135
603652
603513
768091
768043
603368
603369
783025
602706
603104
602433
602549
741020
Service Kit
Repair Kit
Sk48
Rk72
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601902
601877
601708
10
11
12
13
14
15
16
Part
Diameter
Face
Button
Number mm
Inch
Design
Type
Qty / Dia
Ingersoll Rand Shank - Dhd350R / Atlas Copco Cop 54
653061
127
5
Concave
Domed
8 x 13mm / 8 x 16mm
650677
140
5.1/2 Concave Domed/Semi-Ballistic 8 x 16mmd / 7 x 16mmSB
653205
140
5.1/2
Flat
Domed
7 x 16mm D / 8 x 16mm Long
653070
140
5.1/2 Convex
Semi-Ballistic
8x16mm SB/8x16mm Long SB
653257
146
5.3/4 Concave
Domed
15 x 16mm
650676
150
9x16mmd / 10x16mmSB
650711
152
6
Convex
Domed
20 x 16mm
653092
165
6.1/2 Concave
Domed
10 x 16mm / 8 x 20mm
Over Weight
Size (Kg)
Y
Y
Y
16.4
16.2
15.9
16.3
17.8
17.8
21.4
17
18
halcorocktools.com
39
5¨
maintenance.
SUPER DOMINATOR 550 HD
Super Dominator 550 HD is a class leader in
performance and is suitable for drilling at a wide range
of air pressures, excelling at high working pressures.
The Super Dominator 550 HD combines the raw power
of the Super Dominator 500 with extended hammer life
in abrasive conditions due to its larger outside diameter.
Super Dominator 550 HD has a one piece top-adaptor
and eliminate shimming. Super Dominator 550 HD has
no liner which increases the piston blow energy and
reduces part required.
Super Dominator 550 HD is ideal for blast hole
drilling applications.
Super Dominator 550 HD is simple to maintain
and to service with only few simple tools required.
of 100 - 435 psi (7 - 30 bar).
Heavy duty cylinder for extended
hammer life.
Air Consumption
1400
1200
1000
CFM
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
IR DHD 350R
40
350
400
450
500
Hammer Overview
1
Shank
2
3
4
5
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Ingersoll Rand
Dhd350R
90mm (3.544”)
67 Kg
124.5mm (4.85”)
975mm (38.40”)
400 Kg (900 Lbs)
900 Kg (1980 Lbs)
Parts List
6
7
8
9
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Sk
rk
10
11
12
13
14
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
N.r.v.
N.r.v. Spring
N.r.v. Shield
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
Bit Retaining Ring
Chuck Lock Ring
Chuck Spacer
Chuck
End Cap
Dhd350R
600293
Part Number
201701
783028
603510
768144
603554
760135
603652
603661
768091
768043
603370
603369
783025
602706
603104
602863
602866
741020
Service Kit
Repair Kit
Sk49
Rk73
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601902
601877
601708
Drill Bits
Part
Diameter
Face
Button
Number mm
Inch
Design
Type
Qty / Dia
653205
140
5.1/2
Flat
Domed
653070
140
5.1/2 Convex
Semi-Ballistic
653257
146
5.3/4 Concave
Domed
15 x 16mm
650676
150
9x16mmd / 10x16mmSB
650711
152
6
Convex
Domed
20 x 16mm
653092
165
6.1/2 Concave
Domed
10 x 16mm / 8 x 20mm
Over Weight
Size (Kg)
Y
Y
Y
16.2
15.9
16.3
17.8
17.8
21.4
15
16
17
18
halcorocktools.com
41
5¨
SUPER DOMINATOR 550
HD QL 50
required.
The Super Dominator 550 HD QL 50 has been
designed to give maximum performance in
blast-hole applications. This hammer has been tuned
to efficiently utilize the air supply to give optimum
penetration rates. The Super Dominator 550 HD QL 50
is suitable for drilling over a wide range of air pressures,
excelling at higher pressures.
performance.
The unique top-adaptor with N.R.V. (Non-Return-Valve)
makes this hammer easy to maintain and service.
of 100 - 435 psi (7 - 30 bar).
Air Consumption
Super Dominator 550 HD QL 50
1400
1200
1000
CFM
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
IR QL 50
IR QL 50 shank reduces contact
stresses and wear rates.
42
350
400
450
500
Hammer Overview
1
2
3
4
5
6
Hammer Type
Part Number
Shank
Super Dominator 550 Hd QL 50
600294
Ingersoll Rand
QL50
90mm (3.544”)
67 Kg
124.5mm (4.85”)
955mm (37.60”)
400 Kg (900 Lbs)
900 Kg (1980 Lbs)
Top Thread
Hammer Flat Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
7
8
9
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
N.r.v.
N.r.v. Spring
N.r.v. Shield
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
O’Ring
Bit Guide Bush
Bit Retaining Ring
Chuck Lock Ring
Chuck
End Cap
QL 50
600294
Part Number
201701
783028
603510
768144
603554
760135
603652
603661
768091
768043
603370
603524
783025
768043
603520
603522
603104
603660
741020
Service Kit
Repair Kit
Sk40
Rk77
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
603252
603254
603253
10
Sk
rk
11
12
13
14
15
Drill Bits
Part
Diameter
Number
mm
Inch
Ingersoll Rand QL 50 Shank
653031
135
5.5/16
653235
140
5.1/2
653149
145
5.1/2
653032
150
5.7/8
653246
165
6.1/2
Face
Design
Type
Flat
Flat
Concave
Flat
Convex
Domed
Domed
Domed
Domed
Domed
Buttons
Qty / Dia
7 x 16mm + 8 x 16mm Long
15 x 16mm
20 x 16mm
Over
Size
Weight
(Kg)
Y
Y
Y
15.3
16.3
16.0
16.6
19.0
16
17
18
19
halcorocktools.com
43
5¨
GW 500 HD
The New 500 GW High performance hammer drills
under a head of water typically suited to Water Well
and Geothermal applications.
Choke system to allow adjustment
of air flow to improve flushing
Optimised drive chamber capacities
to maximise hammer performance
Its robust non ported piston design improves the
hammer strength and increases air flow efficiency.
A choke facility helps to adjust air flow through the
hammer.
The 500 GW is fitted with a reversible cylinder to
prolong the service life.
up to 30 bar
Air Consumption
GW500 HD Air Consumption
1500
1200
Robust simple piston design for
optimum strength and performance
900
600
300
0
Reversible cylinder for maximum
service life
100 150 200 250 300 350 400 450 500
Air Consumption (SCFM)
Air Consumption (SCFM
Air Consumption (SFCM
Available Shanks
IR DHD 350
44
Hammer Overview
1
2
Hammer Type
Part Number
Shank
Top Thread
Weight
Outside Diameter
Make Up Length
GW500 HD
600390
DHD350
2.3/8 API REG PIN
60KG
126mm (4.961”)
1074mm (42.283”)
400 Kg (900lbs)
900 Kg (1980 lbs)
GW500 HD
600390
DHD350
3.1/2 API REG PIN
60KG
126mm (4.961”)
1074mm (42.283”)
400 Kg (900lbs)
900 Kg (1980 lbs)
Parts List
Hammer Type
GW500 HD
GW500 HD
3
Model Number
DHD350
DHD350
4
Item
600390
600390
5
Description
1
Thread Protector
200111
200111
2
Top Adaptor
604440
604458
3
NRV Plug -Blank
604480
604480
NRV Plug -1/8"
604481
604481
NRV Plug -3/16"
604482
604482
4
NRV
604444
604444
5
NRV Spring
760079
760079
6
Shim -4.5mm
604446
604446
6
7
8
9
10
11
12
Shim -5.0mm
604447
604447
Shim -5.5mm
604448
604448
7
Compression Spring
760109
760109
8
Air Distributor
604442
604442
768202
9
O Ring
768202
10
Cylinder
604436
604436
11
Liner
604441
604441
12
Snap Ring
783054
783054
13
Piston
604439
604439
14
Snap Ring
783054
783054
15
Bit Retaining Rings
604438
604438
16
Chuck
604437
604437
17
End Cap
741020
741020
13
Service Kit
SK65
SK65
Repair Kit
RK103
RK103
Foot Valve
601902
601902
F/V tool -Body
601877
601877
F/V tool -Pusher
601708
601708
Drill Bits
14
15
16
Part
Diameter
Face
Button
Number mm
Inch
Design
Type
Qty / Dia
650772
140
5.1/2 Concave
Domed
8 x 13mm / 8 x 16mm
650677
140
5.1/2 Concave Domed/Semi-Ballistic 8 x 16mmd / 7 x 16mmSB
653205
140
5.1/2
Flat
Domed
653070
140
5.1/2 Convex
Semi-Ballistic
653257
146
5.3/4 Concave
Domed
15 x 16mm
650676
150
9x16mmd / 10x16mmSB
650711
152
6
Convex
Domed
20 x 16mm
653099
160
6.1/4 Concave
Domed
10 x 16mm / 8 x 20mm
653092
165
6.1/2 Concave
Domed
10 x 16mm / 8 x 20mm
Over Weight
Size (Kg)
Y
Y
Y
Y
16.0
16.4
16.2
15.9
16.3
17.8
17.8
21.4
21.4
17
halcorocktools.com
45
6¨
MACH 60
air distributor.
The Mach 60 is a general purpose hammer suitable for
all rock conditions at a wide range of air pressures.
The hammer is fitted with a reversible cylinder to
prolong service life.
Reversible cylinder for
extended life.
Mach 60 is versatile and reliable, requiring only a few
simple tools for servicing and maintenance. Mach 60 is
very economical to operate due to its relatively low air
consumption and has a unique Mach 60 shank for full
bit support. This hammer is most suited for use with
the Sim-Cas Overburden system because of the high
frequency of the piston/cycle.
100 - 435 psi (7 - 30 bar).
Air Consumption
1600
1400
1200
CFM
1000
performance.
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
Halco Mach 60
46
350
400
450
500
Hammer Overview
1
2
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Mach 60
600035
Halco Mach 60
90mm (3.544”)
89 Kg
138mm (5.433”)
1095mm (43.110”)
500 Kg (1100 Lbs)
1500 Kg (3300 Lbs)
Parts List
3
4
5
6
7
8
9
10
11
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Description
Thread Protector
Top-Adaptor
Non Return Valve
N.r.v. Spring
N.r.v. Housing
Compression Ring
Shim - 0.50mm
Shim - 1.00mm
Shim - 1.50mm
Air Distributor
O’Ring
Snap Ring
Cylinder
Piston
Snap Ring
Bottom Spacer
Bit Retaining Ring
O’Ring
Chuck Spacer
Chuck
Cap
Mach 60
Halco
600035
Part Numbers
201701
601555
601560
760079
601558
601562
601590
601797
601798
601557
768130
783012
601553
601554
783012
601571
601573
747105
601563
601556
741009
sk
rk
Service Kit
Repair Kit
Sk07
Rk10
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601570
601568
601569
12
Drill Bits
13
14
15
16
17
Part
Diameter
Number
mm
Halco Mach 60 Shank
650585
152
650939
165
650927
170
650474
178
650354
191
650440
200
650681
203
650363
216
650441
225
650457
245
Face
Button
Over
Size
Weight
(Kg)
16 x 16mm
19 x 16mm
19 x 16mm
18 x 16mm
21 x 16mm
20 x 16mm
31 x 16mm
Y
Y
Y
Y
23.5
26
26
30
32.5
34
35
26 x 16mm
27 x 16mm
Y
Y
42
49
Inch
Design
Type
Qty
6
6.1/2
6.3/4
7
7.1/2
7.7/8
8
8.1/2
8.7/8
9.5/8
Convex
Convex
Flat
Convex
Convex
Convex
Concave
Flat
Convex
Convex
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
18
19
halcorocktools.com
47
6¨
Top-adaptor with internal N.R.V.
air distributor.
DOMINATOR 600
The Dominator 600 is a class leader in performance
and is suitable for drilling at a wide range of air
pressures, excelling at higher working pressures.
Dominator 600 has a unique extended top-adaptor
with retract carbides on Ingersoll-Rand and Mission
versions for digging out of drilled bores.
100 - 435 psi (7 - 30 bar).
Drilling diameters of 152 - 245mm (6 - 9 5/ ”).
8
Air Consumption
1800
1600
1400
CFM
1200
1000
800
600
400
200
0
100
150
200
250
Available Shanks
Halco Mach 60 shank
IR DHD 360
Sandvik Mission A53-25
48
300
PSI
350
400
450
500
1
Hammer Overview
Hammer Type
Part Number
Shank
Dominator 600
600151
Halco
Mach 60
90mm ((3.544”)
89 Kg
139mm (5.472”)
1208mm (47.559”)
500 Kg (1100 Lbs)
1500 Kg (3300 Lbs)
Dominator 600
600094
Ingersoll Rand
DHD 360
101mm (3.977”)
89 Kg
139mm (5.472”)
1208mm (47.559”)
500 Kg (1100 Lbs)
1500 Kg (3300 Lbs)
Dominator 600
Halco
600151
Dominator 600
A53-25
600152
201701
601935
768140
601560
760079
601940
601946
601947
601948
601949
760096
601979
768055
783017
601937
602600
783017
601943
601941
747105
601942
601936
741009
Dominator 600
IR DHD 360
600094
Part Number
201701
602240
768140
601560
760079
601940
601946
601947
601948
601949
760096
601979
768055
783017
601937
602819
783017
747105
602239
602504
747105
601942
601936
741009
Service Kit
Repair Kit
SK05
RK07
SK21
RK35
Sk06
Rk08
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601570
601568
601569
601595
601878
601569
601570
601568
601569
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
2
3
4
5
6
7
8
9
Dominator 600
600152
Sandvik Mission
A53-25
101mm (3.977”)
89 Kg
139mm (5.472”)
1208mm (47.559”)
500 Kg (1100 Lbs)
1500 Kg (3300 Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Top-Adaptor
3
O’Ring
4
Non Return Valve
5
N.r.v. Spring
6
N.r.v. Housing
7
Shim - 4mm
Shim - 5mm
Shim - 6mm
Shim - 7mm
8
Compression Spring
9
Air Distributor
10
O’Ring
11
Snap Ring
12
Cylinder
13
Piston
14
Snap Ring
15
Bottom Spacer
16
Bit Guide Bush
17
Bit Retaining Ring
18
O’Ring
19
Chuck Spacer
20
Chuck
21
Cap
Sk
rk
201701
602240
768140
601560
760079
601940
601946
601947
601948
601949
760096
601979
768055
783017
601937
602600
783017
601943
601992
601994
747105
601942
602004
741009
Drill Bits
10
11
12
13
14
15
16
17
18
19
20
21
Part
Diameter
Face
Number
mm
Inch
Design
Type
Sandvik Mission A53-15 / Sd6
650550
151
6
Concave
Domed
650790
165
6.1/2
Concave
Domed
650940
165
6.1/2
Convex
Domed
650701
171
6.3/4
Concave
Domed
650695
178
7
Flat
Domed
650008
191
7.1/2
Concave
Domed
650336
203
8
Convex
Domed
650065
216
8.1/2
Concave
Domed
Part
Diameter
Face
Number
mm
Inch
Design
Type
Ingersoll Rand (Dhd360) / Atlas Copco Cop64
650783
152
6
Convex
Domed
650793
152
6
Concave
Domed
650789
165
6.1/2
Concave
Domed
650795
165
6.1/2
Convex
Domed
650605
165
6.1/2
Flat
Domed
650897
165
6.1/2
Flat
Domed
650016
165
6.1/2
Flat
Domed/Wear
653134
165
6.1/2
Convex
Domed
650982
170
6.3/4
Convex
Domed
653038
170
6.3/4
Concave
Domed
653097
180
7
Concave
Domed
650686
180
7
Concave
Domed/S-Ball
653098
190
7.1/2
Concave
Domed
653023
200
7.7/8
Convex
Domed
650673
203
8
Concave
Domed
650335
203
8
Convex
Domed
650684
220
8.5/8
Concave
Domed
650696
241
9.1/2
Flat
Domed
Part
Diameter
Number
mm
Inch
Halco Mach 60 Shank
650585
152
6
650939
165
6.1/2
650927
170
6.3/4
650474
178
7
650354
191
7.1/2
650440
200
7.7/8
650681
203
8
650441
225
8.7/8
650457
245
9.5/8
Button
Qty
16 x 16mm
18 x 16mm
19 x 16mm
24 x 16mm
20 x 16mm
24 x 16mm
20 x 16mm
22 x 20mm
Button
Qty
20 x 16mm
17 x 16mm
18 x 16mm
20 x 16mm
12 x 16mm / 8 x 16mm Long
8 x 20mm / 9 x 16mm Long
12 x 16mm / 8 x 16mm L/8 x 13mm W
16 x 16mm / 12 x 16mm Long
6 x 16mm / 13 x 18mm
18 x 16mm
18 x 16mm
8 x 16mm D/10 x 16mm S-B
24 x 16mm
21 x 16mm
31 x 16mm
20 x 16mm
22 x 20mm
18 x 16mm / 10 x 20mm
Face
Design
Button
Type
Qty
Convex
Convex
Flat
Convex
Convex
Convex
Concave
Convex
Convex
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
16 X 16mm
19 X 16mm
19 X 16mm
18 X 16mm
21 X 16mm
20 X 16mm
31 X 16mm
26 X 16mm
27 X 16mm
Over
Size
Weight
(Kg)
Y
Y
Y
Y
Over
Size
26
27.5
27.5
26.2
29
30
36
36
Weight
(Kg)
Y
Y
Y
Y
Y
Y
Y
Y
25
25
25.5
26
25.8
26.2
26.7
25
26.5
26.5
27.3
27.3
30
34.5
35.2
35
40
50
Over
Size
Weight
(Kg)
Y
Y
Y
Y
Y
Y
23.5
26
26
30
32.5
34
35
42
49
halcorocktools.com
49
6¨
maintenance.
and cycle timing to
optimize performance.
SUPER DOMINATOR 600
The Super Dominator 600 is one of the fastest
6” hammers specifically designed for high production
drilling in blast-hole applications. The Super Dominator
600 is a reduced weight hammer with waterwell drilling
capabilities. The unique one piece top-adaptor with
N.R.V. (Non-Return-Valve) makes it easy to
maintain and service the hammer.
Super Dominator 600 requires only few tools
to service and maintain the hammer.
of 100 - 435 psi (7 - 30 bar).
Air Consumption
1800
1600
1400
CFM
1200
1000
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
IR DHD 360
50
350
400
450
500
Hammer Overview
1
2
Hammer Type
Part Number
Shank
3
4
5
6
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Super Dominator 600
600272
Ingersoll Rand
Dhd 360
3 .1/2” Api Reg Pin
101mm (3.977”)
100 Kg
140mm (5.511”)
1139mm (44.842”)
500 Kg (1100 Lbs)
1500 Kg (3300 Lbs)
Parts List
7
8
9
10
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Description
Thread Protector
Snap Ring
N.R.V. Seat
O’Ring
Non Return Valve
N.R.V. Spring
N.R.V. Spring Shield
Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
O’Ring
Bit Guide Bush
Bit Retaining Ring
O’Ring
Chuck Spacer
Chuck
End Cap
Super Dominator 600
IR DHD 360
600272
Part Number
201701
783050
603872
768112
603554
760135
603652
603506
768140
768055
603584
602891
783017
747105
602239
603749
747105
601942
602495
741009
Service Kit
Repair Kit
Sk37
Rk65
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601595
601878
601569
11
Sk
rk
12
Drill Bits
13
14
15
16
17
18
Part
Diameter
Face
Number
mm
Inch
Design
Type
650783
152
6
Convex
Domed
650789
165
6.1/2
Concave
Domed
650795
165
6.1/2
Convex
Domed
653134
165
6.1/2
Convex
Domed
653038
170
6.3/4
Concave
Domed
653097
180
7
Concave
Domed
653098
190
7.1/2
Concave
Domed
653023
200
7.7/8
Convex
Domed
650673
203
8
Concave
Domed
650335
203
8
Convex
Domed
650684
220
8.5/8
Concave
Domed
650696
241
9.1/2
Flat
Domed
Button
Qty
20 x 16mm
18 x 16mm
20 x 16mm
16 x 16mm / 12 x 16mm Long
18 x 16mm
18 x 16mm
24 x 16mm
21 x 16mm
31 x 16mm
21 x 16mm
22 x 20mm
18 x 16mm / 10 x 20mm
Over Weight
Size
(Kg)
Y
Y
Y
Y
Y
Y
Y
25
25.5
26
25
26.5
27.3
30
34.5
35.2
35
40
50
19
20
halcorocktools.com
51
6¨
SUPER DOMINATOR 650
maintenance.
The Super Dominator 650 combines the raw power of
the Super Dominator 600 with extended hammer life
in abrasive conditions due to its heavy duty outside
diameter and reversible cylinder. The unique one piece
top-adaptor with N.R.V. (Non-Return-Valve) makes
the hammer easy to inspect and maintain.
Super Dominator 650 requires only few tools
to service and maintain the hammer.
of 100 - 435 psi (7 - 30 bar).
Air Consumption
1800
Heavy duty reversible cylinder for
extended hammer life.
1600
1400
CFM
1200
1000
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
IR DHD 360
52
350
400
450
500
Hammer Overview
1
2
Hammer Type
Part Number
Shank
3
4
5
6
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Super Dominator 650
600213
600233
Ingersoll Rand
Sandvik Mission
Dhd 360
A53-15/Sd6
101mm (3.977”)
101mm (3.977”)
104 Kg
104 Kg
146mm (5.748”)
146mm (5.748”)
1139mm (44.842”)
1139mm (44.842”)
500 Kg (1100 Lbs)
500 Kg (1100 Lbs)
1500 Kg (3300 Lbs)
1500 Kg (3300 Lbs)
Parts List
7
8
9
10
11
12
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Snap Ring
3
N.R.V. Seat
4
O’Ring
5
Non Return Valve
6
N.R.V. Spring
7
N.R.V. Spring Shield
8
Top-Adaptor
9
O’Ring
10
O’Ring
11
Cylinder
12
Piston
13
Snap Ring
14
Bottom Spacer
15
O’Ring
16
Bit Guide Bush
17
Bit Retaining Ring
18
O’Ring
19
Chuck Spacer
20
Chuck
21
End Cap
Sk
rk
Super Dominator 650
I.R DHD360
A53-15 / SD6
600213
600233
Part Number
201701
201701
783050
783050
603872
603872
768112
768112
603554
603554
760135
760135
602652
603652
603643
603643
768140
768140
768055
768055
603151
603151
602891
602600
783017
783017
601943
747105
602239
601992
603749
601994
747105
747105
601928
601928
602595
602017
741009
741009
Service Kit
Repair Kit
Sk28
Rk48
Sk44
Rk71
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601595
601878
601569
601570
601568
601569
Drill Bits
13
14
15
16
17
18
19
20
21
Part
Diameter
Face
Number
mm
Inch
Design
Type
650789
165
6.1/2
Concave
Domed
650795
165
6.1/2
Convex
Domed
653134
165
6.1/2
Convex
Domed
653038
170
6.3/4
Concave
Domed
653097
180
7
Concave
Domed
653098
190
7.1/2
Concave
Domed
653023
200
7.7/8
Convex
Domed
650673
203
8
Concave
Domed
650684
220
8.5/8
Concave
Domed
650696
241
9.1/2
Flat
Domed
Sandvik Mission A53-15 / Sd6
650790
165
6.1/2
Concave
650940
165
6.1/2
Convex
650701
171
6.3/4
Concave
650695
178
7
Flat
650008
191
7.1/2
Concave
650336
203
8
Convex
650065
216
8.1/2
Concave
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Button
Qty
18 x 16mm
20 x 16mm
16 x 16mm / 12 x 16mm Long
18 x 16mm
18 x 16mm
24 x 16mm
21 x 16mm
31 x 16mm
22 x 20mm
18 x 16mm / 10 x 20mm
18 x 16mm
19 x 16mm
24 x 16mm
20 x 16mm
24 x 16mm
20 x 16mm
22 x 20mm
Over Weight
Size
(Kg)
Y
Y
Y
Y
Y
Y
25.5
26
25
26.5
27.3
30
34.5
35.2
40
50
Y
Y
Y
Y
27.5
27.5
26.2
29
30
36
36
halcorocktools.com
53
6¨
SUPER DOM 650 HD QL 60
required.
The Super Dominator 650 HD QL 60 has been
designed to give maximum performance in
blast-hole applications. This hammer has been tuned
to efficiently utilize the air supply to give optimum
penetration rates. The Super Dominator 650 HD QL 60
is suitable for drilling over a wide range of air pressures,
excelling at higher pressures.
Revised reversible chamber
volumes and cycle timing to
optimize performance.
The unique top-adaptor with N.R.V. (Non-Return-Valve)
makes this hammer easy to maintain and service.
of 100 - 435 psi (7 - 30 bar).
Air Consumption
Super Dominator 650 HD QL 60 Air Consumption
1800
1600
1400
CFM
1200
1000
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
IR QL 60
IR QL 60 shank reduces contact
54
350
400
450
500
Hammer Overview
1
2
3
4
5
6
7
8
Hammer Type
Part Number
Shank
Super Dominator 650 HD QL 60
600316
Ingersoll Rand
QL 60
101mm (3.977”)
100 Kg
146mm (5.748”)
1043mm (41.07”)
500 Kg (1100 Lbs)
1500 Kg (3300 Lbs)
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
Non Return Shuttle Valve
N.r.v. Spring
N.r.v. Spring Shield
Integral Top-Adaptor
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
O’Ring
Bit Guide Bush
Bit Retaining Ring
Chuck
End Cap
QL 60
600316
Part Number
201701
783050
603872
768112
603554
760135
603652
603806
747105
768140
603801
603538
783017
747105
603537
603866
603802
741042
Service Kit
Repair Kit
SK43
RK81
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
602852
603547
601564
9
10
Sk
rk
11
12
Drill Bits
13
14
15
Part
Diameter
Face
Number
mm
Inch
Design
650094
156
6.1/8
Concave
653139
165
6.1/2
Concave
653160
171
6.3/4
Convex
653128
178
7
Concave
653227
190
7.1/2
Concave
653142
203
8
Concave
653211
241
9.1/2
Concave
Type
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Buttons
Qty / Dia
16 x 16mm
18 x 18mm
19 x 18mm
8x 20mm + 11 x 16mm
24 x 16mm
31 x 16mm
18 x 20mm / 10 x 16mm
Over Weight
Size
(Kg)
Y
Y
Y
Y
23.2
24.4
25.3
26.2
31.7
34.1
39.5
16
17
18
halcorocktools.com
55
6¨
GW 600
The New GW 600 high performance hammer drills
under a head of water typically suited to water well
and geothermal applications.
Choke system to allow adjustment
of air flow to improve flushing
Its robust non ported piston design improves the
hammer strength and increases air flow efficiency.
A choke facility helps to adjust air flow through the
hammer.
The GW 600 is fitted with a reversible cylinder to
prolong the service life.
Optimised drive chamber capacities
to maximise hammer performance
Air Consumption
GW600 Air Consumption
2000
1500
1000
500
Robust simple piston design for
optimum strength and performance
0
100 150 200 250 300 350 400 450 500
3/16
1/8 Choke
Blank
Reversible cylinder for maximum
service life
12 spline QL60 shank reduces
contact stress and wear rates
56
Available Shanks
IR QL 60
1
2
3
4
5
7
6
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer size
Weight
Outside Diameter
Make Up Length
Recommended Maximum thrust
10
11
12
13
14
15
16
GW 600 HD
600398
Ingersoll Rand
QL 60
3 1/2" Api Reg Pin
101mm (3.976”)
100Kg
146mm (5.748")
1035.15mm (40.754”)
500Kg (1100Lbs)
1500Kg (3300Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
8
9
GW 600
600397
Ingersoll Rand
QL 60
3 1/2" Api Reg Pin
101mm (3.976”)
86Kg
140mm (5.512")
1035.15mm (40.754”)
500Kg (1100Lbs)
1500Kg (3300Lbs)
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Description
Thread Protector
Top Adaptor
O-Ring
4mm M/UP Shim
5mm M/UP Shim
6mm M/UP Shim
7mm M/UP Shim
Compression Spring
NRV
NRV Bleed Plug Blank
NRV Bleed Plug 1/8"
NRV Bleed Plug 3/16"
Spring
Air Distributor
O-Ring
Liner
Cylinder
Snap Ring
Piston
Snap Ring
Guide Bush
O-Ring
Bit Retaining Rings
O-Ring
Chuck
End Cap
Part
Diameter
Face
Number
mm
Inch
Design
650094
156
6.1/8 Concave
653139
165
6.1/2 Concave
653160
171
6.3/4 Convex
653128
178
7
Concave
653227
190
7.1/2 Concave
653142
203
8
Concave
653211
241
9.1/2 Concave
GW600
QL 60
600397
Part Number
201701
604521
768140
601946
601947
601948
601949
760159
604444
604480
604481
604482
760079
604514
768043
604519
604517
783056
604520
783056
604518
747105
604515
747105
604516
741042
GW600 HD
QL60
600398
Part Number
201701
604360
768140
601946
601947
601948
601949
760159
604444
604480
604481
604482
760079
604514
768043
604519
604360
783056
604520
783056
604518
747105
604515
747105
604561
741042
Buttons
Type
Qty / Dia
Domed
Domed
Domed
Domed
Domed
Domed
Domed
16 x 16mm
18 x 18mm
19 x 18mm
8x 20mm + 11 x 16mm
24 x 16mm
31 x 16mm
18 x 20mm / 10 x 16mm
Over Weight
Size (Kg)
Y
Y
Y
Y
23.2
24.4
25.3
26.2
31.7
34.1
39.5
17
18
19
20
21
halcorocktools.com
57
7¨
DOMINATOR 750
maintenance.
The Dominator 750 offers a class leading performance.
The mining quarrying and waterwell industries will all
benefit from the reliable design offered by a one piece
top-adaptor/air distributor. A reversible cylinder is also
fitted to the Dominator 750 to prolong hammer life
and reduce costs. A few simple tools are required to
maintain and service the hammer which makes this
hammer user-friendly.
of 100 - 435 psi (7 - 30 bar).
Air Consumption
2500
2000
CFM
1500
1000
500
0
100
150
200
250
300
PSI
Available Shanks
58
350
400
450
500
Hammer Overview
1
2
3
4
5
6
Hammer Type
Part Number
Shank
Dominator 750
600243
Sandvik Mission
A63-15/SD8
115mm (4.528”)
165 Kg
172mm (6.772”)
1232mm (48.504”)
800 Kg (1760 Lbs)
2000 Kg (4400 Lbs)
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
7
8
9
10
11
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
sk
rk
12
Description
Thread Protector
Snap Ring
O’Ring
N.r.v. Seat
Non Return Valve
N.r.v. Spring
Top-Adaptor
O’Ring
O’Ring
Spacer
Cylinder
Piston
Snap Ring
O’Ring
Bit Retaining Ring
Chuck Spacer
Chuck
Cap
Dominator 750
A63-15 / Sd8
600243
Part Number
207295
783034
768150
602887
602285
760117
602882
768151
768152
602885
602880
603382
783033
768149
602886
602885
602881
741044
Service Kit
Repair Kit
Sk23
Rk37
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601828
601829
601569
Drill Bits
13
14
15
16
Part
Diameter
Face
Number
mm
Inch
Design
Sandvik Mission A63-15/sd8 Shank
650959
200
7.7/8 Concave
653404
200
7.7/8 Concave
650375
203
8
Concave
650705
222
8.3/4 Concave
650606
254
10
Concave
653105
270 10.5/8 Concave
650039
300
12
Flat
Buttons
Type
Qty
Domed
Domed
Domed
Domed
Domed
Domed
Domed
12x16mm/9x20mm/6x13mm
10x20mm / 14x16mm
24 x 20mm
11x16mm / 18 x 20mm
34 x 18mm
29 x 20mm
Over Weight
Size
(Kg)
Y
43.0
43.0
43.5
46.5
56.5
57.0
84.5
17
18
halcorocktools.com
59
8¨
DOMINATOR 800
One piece top-adaptor
reduces internal parts.
No make up required. External
N.R.V. for easy maintenance.
within the cylinder,
The Dominator 800 is a general purpose hammer
suitable for a wide range of air pressures.
The Dominator 800 is a low to mid range air
volume hammer. The one piece top-adaptor
with N.R.V. (Non-Return-Valve) makes it easy to
maintain and service the hammer. The Dominator 800
unique’s air distributor finger is integral with
the top-adaptor and reduces requirements for
shimming. The Dominator 800 has no liner which
increases the piston blow energy and reduces
parts required. This hammer is suitable for use with
overburden systems.
Dominator 800 is available in three different
shank types (see below).
100 - 435 psi (7 - 30 bar).
Drilling diameters of 200 - 311mm (7 7/8 - 14 1/4” ).
Air Consumption
1600
1400
1200
CFM
1000
800
600
400
200
0
100
150
200
250
300
PSI
Available Shanks
Halco Mach 80
IR DHD 380
60
350
400
450
500
1
Hammer Overview
Shank
2
3
4
5
6
7
8
9
10
11
12
13
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Halco
Mach 80
4. 1/2” Api Reg Pin
156mm (6.142”)
175 Kg
182mm (7.165”)
1180mm (46.456”)
800kg (1760 Lbs)
2000kg (4400 Lbs)
Sandvik Mission
A63-15/SD8
156mm (6.142”)
180 Kg
182mm (7.165”)
1180mm (46.456”)
800kg (1760 Lbs)
2000kg (4400 Lbs)
Ingersoll Rand
Dhd 380
156mm (6.142”)
181 Kg
182mm (7.165”)
1180mm (46.456”)
800kg (1760 Lbs)
2000kg (4400 Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Snap Ring
3
N.r.v. Seat
4
O’Ring
5
N.r.v.
6
N.r.v. Cover
7
N.r.v. Spring
8
Top-Adaptor
9
Spacer
10
O’Ring
11
O’Ring
12
Cylinder
13
Piston
14
Snap Ring
15
Spacer
16
Containment Band
17
Bit Ring
18
Chuck Spacer
19
Chuck
20
End Cap
sk
rk
207295
783034
602887
768150
602285
603696
760108
603607
603576
768103
768145
603687
603754
783015
603549
601677
603576
603685
741034
Dominator 800
A63-15 / Sd8
600308
Part Number
207295
783034
602887
768150
602285
603696
760108
603607
603576
768103
768145
603687
603747
783015
768102
601839
603576
603686
741034
Service Kit
Repair Kit
Sk25
Rk78
Sk51
Rk79
Sk25
Rk64
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601675
601820
601569
601828
601829
601569
601819
601820
601569
Halco
600310
Dhd 380
600309
207295
783034
602887
768150
602285
603696
760108
603607
603576
768103
768145
603687
603755
783015
602840
603549
603043
603576
603495
741027
Drill Bits
14
15
16
17
18
19
20
Part
Diameter
Face
Number mm
Inch
Design
Halco Mach 80 Shank
650980
203
8
Convex
650938
216
8.1/2
Convex
650571
225
8.7/8
Convex
650746
254
10
Convex
653040
300
11.7/8
Flat
650365
311
12.1/4
Convex
650908
375
14.3/4
Flat
650959
200
7.7/8
Concave
650375
203
8
Concave
650693
216
8.1/2
Flat
650705
222
8.3/4
Concave
650357
241
9.1/2
Concave
650606
254
10
Concave
650037
254
10
Flat
653105
270
10.5/8
Concave
653104
280
11
Concave
650039
300
11.7/8
Flat
Ingersoll Rand Shank - Dhd 380
650977
200
7.7/8
Concave
650373
203
8
Concave
650022
241
9.1/2
Concave
650389
254
10
Concave
650898
300
11.7/8
Convex
653041
311
12.1/4
Concave
Buttons
Type
Qty
Domed
Domed
Domed
Domed
Domed
Domed
Domed
21 x 20mm
21 x 20mm
26 x 16mm
21 x 20mm
38 x 20mm
29 x 20mm
40 x 20mm
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
10x20mm / 14x16mm
10 x 20mm / 24 x 16mm
24 x 20mm
18 x 20mm
11x16mm / 18 x 20mm
28 x 20mm
34 x 18mm
34 x 18mm
29 x 20mm
Domed
Domed
Domed
Domed
Domed
Domed
31 x 16mm
10 x 20mm / 14 x 16mm
10 x 16 / 18 x 20mm
18 x 20mm / 10x16mm
34 x 20mm
42 x 20mm
Over Weight
Size (Kg)
Y
Y
Y
51.5
53.0
55.5
65.0
83.3
83.0
121.0
Y
Y
43.0
43.5
47.6
46.5
52.5
56.5
58.3
57.0
59
84.5
Y
Y
51.5
51.5
56.9
64.5
84.5
84.1
halcorocktools.com
61
8¨
One piece Top Adaptor reduces
internal parts. No make up required.
External NRV for easy servicing
DOMINATOR 800 LE
The Dominator 800 LE has been designed for high
performance drilling in blast hole application in
quarries and mines. Its operating characteristics
are particularly suited to soft and un-consolidated
ground conditions.
The single piece Top Adaptor/ Air distributor
improves reliability and is easy to service. The
outer cylinder is hardened for maximum durability
and can be reversed to increase service life.
of 100 - 435 psi (7 - 30 bar).
Drive chamber capacities and air
cycle tuned for efficient drilling
of soft un-consolidated ground
conditions
Air Consumption
Dominator 800 LE Air Consumption
2000
1500
1000
Optimised piston porting for
improved air flow and high
frequency operation
500
0
100 150 200 250 300 350 400 450 500
Theoretical Air Consumption
Available Shanks
IR QL 80
Reversible outer cylinder for
extended service life
16 spline QL80 shank for
maximum strength and durability
62
Hammer Overview
1
2
3
4
5
6
7
8
9
11
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Dominator 800 LE
600396
Ingersoll Rand QL 80
4.1/2" Api Reg Pin
127mm (5")
178 Kg
182mm (7.165")
1244mm (48.976")
800 Kg (1760 Lbs)
2000 Kg (4400 Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
sk
rk
10
Description
Thread Protector
Snap Ring
N.R.V. Seat
O' Ring
Non Return Valve
N.R.V. Spring
Top Adaptor
Spacer
O' Ring
Piston
Cylinder
Snap Ring
O' Ring
Bit Guide Bush
Bit Retaining Ring
Chuck Spacer
Chuck
End Cap
Dominator 800 LE
IR Ql 80
600396
Part Number
207295
783034
602887
768150
602285
760117
604510
603576
768145
604505
604506
783033
768151
604511
604347
603576
604507
741027
Service Kit
Repair Kit
Sk71
Rk120
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
603334
603342
603341
Drill Bits
12
13
Part
Diameter
Face
Number
mm
Inch
Design
Ingersoll Rand Shank - QL 80
653062
222
8.3/4
Concave
653239
254
10
Concave
653254
270 10.5/8 Concave
653263
270 10.5/8 Concave
Type
Domed
Domed
Domed
Parabolic
Buttons
Qty
14 x 18mm / 10 x 18mm Long
34x18mm / 12x13mm Retracks
Over Weight
Size
(Kg)
56.8
64
69.5
69.5
14
15
16
17
18
halcorocktools.com
63
8¨
DOMINATOR 850
maintenance.
The Dominator 850 has been designed for high
performance drilling in hard to medium rock formations,
particularly mining applications. Its class leading
performance has been achieved with a larger/heavier
piston and a valveless air cycle providing a 50%
increase in stroke. As well as a reversible cylinder for
prolonged hammer life, the Dominator 850 benefits from
a QL80 shank design. The one piece top-adaptor with
N.R.V. (Non-Return-Valve) makes it easy to maintain
and service the hammer. This hammer has few internal
parts which makes on site servicing easy with minimum
tools needed.
100 - 435 psi (7 - 30 bar).
Air Consumption
2500
2000
CFM
1500
1000
500
0
100
150
200
250
300
PSI
Available Shanks
IR QL80 shank reduces contact
64
IR QL 80
350
400
450
500
1
2
3
4
5
6
7
8
9
10
11
Hammer Overview
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Dominator 850
600245
Ingersoll Rand QL 80
125mm (4.921”)
210 Kg
192mm (7.559”)
1281mm (50.433”)
800kg (1760 Lbs)
2000kg (4400 Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
sk
rk
12
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
N.r.v.
N.r.v. Cover
N.r.v. Spring
Top-Adaptor
Spacer
O’Ring
Piston
Cylinder
Snap Ring
O’Ring
Bit Guide Bush
Bit Ring
Chuck Spacer
Chuck
End Cap
Dominator 850
QL80
600245
Part Number
207295
783034
602887
768150
602285
603696
760108
603353
603358
768169
603349
603347
783039
768169
603360
603359
603358
603357
741027
Service Kit
Repair Kit
Sk32
Rk55
Foot Valve
Body
Pusher
603334
603342
603341
Drill Bits
13
14
15
Part
Diameter
Face
Number
mm
Inch
Design
Ingersoll Rand Shank - QL 80
653062
222
8.3/4
Concave
653239
254
10
Concave
653254
270 10.5/8 Concave
653263
270 10.5/8 Concave
Type
Domed
Domed
Domed
Parabolic
Buttons
Qty
14 x 18mm / 10 x 18mm Long
Over Weight
Size
(Kg)
56.8
64
69.5
69.5
16
17
18
19
halcorocktools.com
65
8¨
DOMINATOR 880
maintenance.
The Dominator 880 is a general purpose hammer
suitable for a wide range of air pressures.
The Dominator 880 is a well drilling hammer with
a mid to high range air volume. The one piece
top-adaptor with N.R.V. (Non-Return-Valve)
makes it easy to maintain and service the hammer.
A choice of blank, 4mm, 6mm or 8mm chokes
can be fitted to provide varied air flow making
the Dominator 880 a versatile hammer. The wide body
diameter of the Dominator 880 allows for an increased
piston weight and, therefore, an improved performance.
The unique air distributor integral with top-adaptor
reduces requirements for shimming.
of 100 - 435 psi (7 - 30 bar).
Drilling diameters of 200 - 311 mm (7 7/8 - 12 1/4”).
Air Consumption
2500
2000
1500
CFM
1000
500
0
100
IR QL80 shank reduces contact
150
200
250
PSI
Bleed Plug Blank Blue
Bleed Plug 4mm Pink
Bleed Plug 6mm Yellow
Bleed Plug 8mm Turquoise
Available Shanks
IR QL 80
66
300
350
400
450
500
1
2
3
4
5
6
Hammer Overview
Hammer Type
Part Number
Shank
Dominator 880
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
600311
Sandvik Mission
A63-15/Sd8
156mm (6.142”)
177 Kg
182mm (7.165”)
1263mm (49.724”)
800kg (1760 Lbs)
2000kg (4400 Lbs)
600312
Ingersoll Rand
Dhd 380
156mm (6.142”)
177 Kg
182mm (7.165”)
1263mm (49.724”)
800kg (1760 Lbs)
2000kg (4400 Lbs)
Parts List
7
8
9
10
11
12
13
14
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Snap Ring
3
N.r.v. Seat
4
O’Ring
5
Non Return Valve
6
N.r.v. Cover
7
N.r.v. Spring
8
Top-Adaptor
9
Spacer
10
O’Ring
11
O’Ring
12*
Blank Plug (Blank)
Blank Plug (4mm)
Blank Plug (6mm)
Blank Plug (8mm)
13
Cylinder
14
Piston
15
Snap Ring
16
Spacer
17
Containment Band
18
Bit Ring
19
Chuck Spacer
20
Chuck
21
End Cap
Dominator 880
A63-15 / Sd8
600311
DHD 380
600312
Part Number
207295
783034
602887
768150
602285
603696
760108
603607
603576
768103
768145
602450
602451
602452
602453
603691
603614
783015
768102
601839
603576
603686
741027
207295
783034
602887
768150
602285
603696
760108
603607
603576
768103
761845
602450
602451
602452
602453
603691
602654
783015
602840
603549
603043
603576
603495
741027
Service Kit
Repair Kit
Sk51
Rk79
SK25
RK64
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601828
601829
601569
601819
601820
601569
sk
rk
Drill Bits
15
16
17
18
19
20
Part
Diameter
Face
Buttons
Number mm Inch
Design
Type
Qty
650959
200 7.7/8
Concave
Domed
650375
203
8
Concave
Domed
10x20mm / 14x16mm
650922
203
8
Concave
Domed/S-Ballistic
10x20mmd/14x16mmsb
650837
219 8.5/8
Concave
Domed
18 x 20mm
650705
222 8.3/4
Concave
Domed
24 x 20mm
650357
241 9.1/2
Concave
Domed
18 x 20mm
650606
254
10
Concave
Domed
11x16mm / 18 x 20mm
650037
254
10
Flat
Domed
28 x 20mm
653105
270 10.5/8 Concave
Domed
34 x 18mm
650039
300 11.7/8
Flat
Domed
29 x 20mm
650977
200 7.7/8
Concave
650373
203
8
Concave
650022
241 9.1/2
Concave
650389
254
10
Concave
650898
300 11.7/8
Convex
653041
311 12.1/4 Concave
Domed
Domed
Domed
Domed
Domed
Domed
31 x 16mm
10 x 20mm / 14 x 16mm
10 x 16 / 18 x 20mm
18 x 20mm / 10x16mm
34 x 20mm
42 x 20mm
Over Weight
Size
(Kg)
Y
43.0
43.5
43.0
46.0
46.5
52.5
56.5
58.3
57.0
84.5
Y
Y
52.0
51.5
56.9
64.5
84.5
84.1
21
halcorocktools.com
67
8¨
DOMINATOR 880 DW
maintenance.
The Dominator 880 Deep-Well hammer has been
specifically designed for drilling deep holes under a
head of water. The one piece top-adaptor with N.R.V.
(Non-Return-Valve) makes it easy to maintain and
service the hammer. The wide body diameter of the
Dominator 880 DW allows for an increased piston
weight and therefore an improved performance.
A variable choke for increased air volume can
be fitted to the Dominator 880 DW to suit compressor
volume outputs.
100 - 435 psi (7 - 30 bar).
Air Consumption
Dominator 880 DW Air Consumption
3500
3000
2500
CFM
2000
1500
1000
500
0
100
150
200
250
300
PSI
Available Shanks
IR DHD 380
68
350
400
450
500
1
Hammer Overview
2
Hammer Type
Part Number
Shank
Dominator 880dw
600261
Ingersoll Rand
Dhd 380
156mm (6.142”)
177 Kg
182mm (7.165”)
1263mm (49.724”)
800kg (1760 Lbs)
2000kg (4400 Lbs)
3
4
5
6
7
8
9
10
11
12
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
sk
rk
13
14
15
16
17
18
Description
Thread Protector
Snap Ring
N.r.v. Seat
O’Ring
Non Return Valve
N.r.v. Cover
N.r.v. Spring
Top-Adaptor
Spacer
O’Ring
O’Ring
Cylinder
Piston
Snap Ring
Spacer
Containment Band
Bit Ring
Chuck Spacer
Chuck
End Cap
Dominator 880DW
Dhd 380
600261
Part Number
207295
783034
602887
768150
602285
603696
760108
603498
603576
768103
768145
603496
602743
783015
602840
603549
603043
603576
603495
741027
Service Kit
Repair Kit
Sk25
Rk64
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
603334
603342
6013341
Drill Bits
Part
Diameter
Face
Number mm Inch
Design
650977
200 7.7/8
Concave
650373
203
8
Concave
650022
241 9.1/2
Concave
650389
254
10
Concave
650898
300 11.7/8
Convex
653041
311 12.1/4 Concave
Buttons
Type
Qty
Domed
Domed
Domed
Domed
Domed
Domed
31 x 16mm
10 x 20mm / 14 x 16mm
10 x 16 / 18 x 20mm
18 x 20mm / 10x16mm
34 x 20mm
42 x 20mm
Over Weight
Size
(Kg)
Y
Y
52.0
51.5
56.9
64.5
84.5
84.1
19
20
halcorocktools.com
69
10 ¨
DOMINATOR 1000
maintenance.
The Dominator 1000 incorporates a unique piston
design for high performance and reliability especially
in waterwell applications. This hammer is suitable for a
wide range of air pressures. Its optimum performance is
reached at air pressures of 200psi (14 bar) and above.
The Dominator 1000 has a body diameter of 230mm
and piston weight of 87.6kg, one of the heaviest in its
class providing excellent performance. A reversible
cylinder is fitted to the hammer to prolong its life and
reduce cost.
Live air bleed to adjust volume.
The ‘Captive’ bit retaining rings and an improved thread
design ensures that the Dominator 1000 is simple to
service with a few tools.
of 100 - 435 psi (7 - 30 bar).
Drilling diameters of 254 - 381mm (10 - 15”).
Air Consumption
4000
3500
3000
CFM
2500
2000
1500
1000
500
0
100
150
200
250
300
PSI
Bleed Plug 3mm Pink
Bleed Plug 6mm Purple
Bleed Plug 8mm Brown
No Bleed Plug
Available Shanks
Sandvik Mission SD10
70
350
400
450
500
Hammer Overview
1
2
3
4
5
6
7
8
9
10
11
Hammer Type
Part Number
Shank
Dominator 1000
600248
Sandvik Mission
Sd10
200mm (7.874”)
367 Kg
230mm (9.055”)
1390mm (54.724”)
1500 Kg (3400 Lbs)
3500 Kg (7700 Lbs)
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
Model Number
Item
Description
1
Lifting Cap
2
Circlip
3
N.r.v. Seat
4
O’Ring
5
Nr Valve
6
N.r.v. Spring
7
Adaptor Assy
8
Top-Adaptor Spacer
9
O’Ring
10
O’Ring
11*
Bleed Plug 3mm Pink
Bleed Plug 6mm Purple
Bleed Plug 8mm Brown
12
Cylinder
13
Piston
14
Snap Ring
15
Bit Retaining Ring
16
Chuck Spacer
17
Chuck
18
Cap
Dominator 1000
Sd10
600248
Part Number
602354
777001
602286
768133
602288
760055
603429
603432
768172
768172
602499
602500
602501
602502
602503
602874
603434
603433
783040
603435
603432
603436
741049
12
sk
rk
13
Service Kit
Repair Kit
Sk29
Rk50
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
603186
603188
603187
Drill Bits
14
15
16
Part
Diameter
Number
mm
Inch
Sandvik Mission SD10 Shank
650648
254
10
650644
280
11
650650
305
12
650071
311
12.1/4
650072
381
15
Face
Design
Type
Buttons
Qty
Concave
Concave
Concave
Concave
Concave
Domed
Domed
Domed
Domed
Domed
11 x 16mm / 18 x 20mm
34 x 18mm
34 x 20mm
46 x 20mm
65 x 20mm
Over Weight
Size
(Kg)
Y
Y
Y
84.7
97.0
96.4
107.0
146.0
17
18
halcorocktools.com
71
12 ¨
Heavy duty top-adaptor with box
connection reduces internal parts.
SUPER DOMINATOR 1200
The Super Dominator 1200 accepts QL120 shank bits
and drills most efficiently at air pressures between 100
psi (7 bar) and 435 psi (30 bar). Due to its higher air
consumption, it provides increased uphole velocity,
particularly when using oversized diameter drill bits.
The Super Dominator 1200 has a one piece top-adaptor
and eliminate shimming which increases service
intervals. The Super Dominator 1200 has a robust
top-adaptor for extra strength.
100 - 435 psi (7 - 30 bar).
Drilling diameters of 311 - 445mm (12 - 17 1/2”).
Air Consumption
performance.
4000
3500
3000
CFM
2500
2000
1500
1000
Replaceable bit bearings.
500
0
100
150
200
250
300
PSI
Available Shanks
QL120 shank reduces contact
Replaceable bit bearings.
72
IR QL 120
350
400
450
500
Hammer Overview
1
2
3
4
5
6
7
10
8
9
11
12
Hammer Type
Part Number
Shank
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
Model Number
Item
Description
1
Lifting Cap
2
Circlip
3
O’Ring
4
N.r.v. Seat
5
Non Return Valve
6
N.r.v. Spring
7
Top-Adaptor
8
Top-Adaptor Spacer
8
O’Ring
10
O’Ring
11
Piston
12
Cylinder
13
Inner Bearing Ring
14
Containment Band
15
Bit Retaining Ring
16
Chuck Spacer
17
Drive Pins
18
Chuck Bearing
19
Chuck
20
End Cap
sk
rk
13
Drill Bits
14
Part
Number
QL 120 Shank
653034
653089
653035
15
16
600373
Ingersoll Rand
Ql 120
6 .5/8” Api Reg Box
260mm (10.236”)
807 Kg
284mm (11.181”)
1978mm (77.874”)
1600 Kg (3520 Lbs)
3500 Kg (7700 Lbs)
Ql120
600373
Part Number
604284
777001
768133
602286
602288
760055
604282
603575
768137
768137
603572
603565
603566
603581
603567
603568
600595
603563
603562
741050
Service Kit
Repair Kit
Sk47
Rk76
Foot Valve
F/v - Body
F/v - Pusher
603561
603582
603583
Diameter
mm
Inch
311
314
445
12.1/4
12.3/8
17.1/2
Face
Design
Type
Buttons
Qty
Weight
(Kg)
Concave
Concave
Concave
Domed
Domed
Domed
31 x 20mm
32 x 20mm
82x20mm / 30x16mm Wear
168
168
271
17
18
19
20
halcorocktools.com
73
12 ¨
MACH 120
maintenance.
The Mach 120 accepts A100-15 (SD12) shank bits and
its optimum performance is reached at air pressures
of 200psi (14 bar) and above. The Mach 120 has a one
piece top-adaptor with N.R.V. (Non-Return-Valve) fitted
for easy inspection and service, with integral finger to
reduce maintenance and eliminate shimming which
increases service intervals. Mach 120 has no liner which
increases the 140 kg piston’s blow energy and reduces
parts required. This hammer is suitable for use with
overburden systems.
100 - 435 psi (7 - 30 bar).
Air Consumption
Mach 120
3000
2500
CFM
2000
1500
1000
500
0
100
150
200
250
300
350
PSI
Available Shanks
74
400
450
500
1
Hammer Overview
Hammer Type
Part Number
Shank
2
3
4
5
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Mach 120
600108
Sandvik Mission
A100-15 / Sd12
N/A
614 Kg
273mm (10.748”)
1667mm (65.629”)
1600 Kg (3520 Lbs)
3500 Kg (7700 Lbs)
Parts List
6
7
8
9
10
11
Hammer Type
Shank
Model Number
Item
Description
1
Lifting Cap
2
Circlip
3
O’Ring
4
N.r.v. Seat
5
Non Return Valve
6
N.r.v. Spring
7
Top-Adaptor
8
O’Ring
9
O’Ring
10
Top-Adaptor Spacer
11
Cylinder
12
Piston
13
Snap Ring
14
Containment Band
15
Bit Retaining Ring
16
Chuck Spacer
17
Chuck
18
End Cap
Sk
rk
12
Mach120
A100-15/Sd12
600108
Part Number
602354
777001
768133
602286
602288
760055
602639
768137
768137
602366
602013
602047
783021
768105
602102
602366
602052
741035
Service Kit
Repair Kit
Sk12
Rk19
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601811
601812
601813
Drill Bits
13
14
15
Part
Diameter
Face
Number
mm
Inch
Design
Type
Halco/ Sandvik Mission A100-15/Sd12 Shank
650874
300
11.7/8
Convex
Domed
650383
311
12.1/4 Concave
Domed
650988
381
15
Concave
Domed
653138
406
16
Concave
Domed
650376
445
17.1/2 Concave
Domed
Buttons
Qty
29 x 20mm
31 x 20mm
65 x 20mm D / 18 x 16mm W
74 x 20mm D / 18 x 16mm W
79 x 20mm
Over
Size
Weight
(Kg)
Y
138
133.5
208
210
245
16
17
18
halcorocktools.com
75
12 ¨
MACH 122
easy maintenance.
The Mach 122 accepts A100-15 (SD12) shank
bits and works over a wide pressure range with
an optimum performance reached at air pressures
of 200 psi (14 bar) and above as its higher air
consumption provides increased uphole velocity,
particularly when using oversized diameter
drill bits.
Mach 122 has a one piece top-adaptor with N.R.V.
(Non-Return-Valve) fitted for easy inspection and
service, with integral finger to reduce maintenance and
eliminate shimming which increases service intervals.
Mach 122 has no liner which increases the 140 kg
piston blow energy and reduces parts required. This
hammer is suitable for use with overburden systems.
100 - 435 psi (7 - 30 bar).
Air Consumption
4000
3500
3000
2500
CFM
2000
1500
1000
500
0
100
150
200
250
300
350
PSI
Available Shanks
76
400
450
500
1
Hammer Overview
Hammer Type
Part Number
Shank
2
3
4
5
6
7
8
9
10
11
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Mach 122
600110
Sandvik Mission
A100-15/Sd12
N/A
614 Kg
273mm (10.748”)
1667mm (65.629”)
1600 Kg (3520 Lbs)
3500 Kg (7700 Lbs)
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Sk
rk
12
Description
Lifting Cap
Circlip
O’Ring
N.r.v. Seat
Non Return Valve
N.r.v. Spring
Top-Adaptor
O’Ring
O’Ring
Top-Adaptor Spacer
Cylinder
Piston
Snap Ring
Containment Band
Bit Retaining Ring
Chuck Spacer
Chuck
End Cap
Mach122
A100-15 / Sd12
600110
Part Number
602354
777001
768133
602286
602288
760055
602639
768137
768137
602366
602425
602047
783021
768105
602102
602366
602052
741035
Service Kit
Repair Kit
Sk12
Rk19
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
601811
601812
601813
Drill Bits
13
14
15
Part
Diameter
Face
Number
mm
Inch
Design
Type
Halco/ Sandvik Mission A100-15/Sd12 Shank
650874
300
11.7/8
Convex
Domed
650383
311
12.1/4 Concave
Domed
650988
381
15
Concave
Domed
653138
406
16
Concave
Domed
650376
445
17.1/2 Concave
Domed
Buttons
Qty
29 x 20mm
31 x 20mm
65 x 20mm D / 18 x 16mm W
74 x 20mm D / 18 x 16mm W
79 x 20mm
Over
Size
Weight
(Kg)
Y
138
133.5
208
210
245
16
17
18
halcorocktools.com
77
12 ¨
MACH 132
maintenance.
The Mach 132 hammer accepts IR DHD112 shank bits.
This hammer, although capable of high pressure drilling
is particularly suitable at pressures between 100-200
psi (7 - 14 bar). The Mach 132 has a pin drive system
to prevent metal to metal contact thereby minimizing
spline wear and damage which can result in drill bit
shank failure.
Mach 132 has a one piece top-adaptor with N.R.V.
(Non-Return-Valve) fitted for easy inspection and
service, with integral finger to reduce maintenance and
eliminate shimming which increases service intervals.
Servicing requires only a few simple tools. Mach 132
has no liner which increases the 140 kg piston blow
energy and reduces parts required. This hammer is
suitable for use with overburden systems.
100 - 435 psi (7 - 30 bar).
Drilling diameters of 381 - 489 mm (15 - 19 1/4”).
Air Consumption
4000
3500
3000
CFM
2500
2000
1500
1000
500
0
100
150
200
250
300
PSI
Available Shanks
IR DHD 112
78
350
400
450
500
1
Hammer Overview
Hammer Type
Part Number
Shank
2
3
4
5
6
7
8
9
10
11
12
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Sk
rk
13
14
15
16
17
18
19
Mach 132
600142
Ingersoll Rand
Dhd 112
N/A
614 Kg
273mm (10.748”)
1684mm (66.299”)
1600 Kg (3520 Lbs)
3500 Kg (7700 Lbs)
Description
Lifting Cap
Circlip
O’Ring
N.r.v. Seat
Non Return Valve
N.r.v. Spring
Top-Adaptor
O’Ring
O’Ring
Top-Adaptor Spacer
Cylinder
Piston
Snap Ring
Bearing Bush
O’Ring
Containment Band
Bit Retaining Ring
Chuck Spacer
Drive Pins
Chuck
End Cap
Mach132
Dhd112
600142
Part Number
602354
777001
768133
602286
602288
760055
602639
768137
768137
602366
602563
602532
783021
602531
768184
603819
602530
602366
600564
602528
741035
Service Kit
Repair Kit
Sk14
Rk23
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
602522
602523
601813
Drill Bits
Part
Diameter
Number
mm
Inch
Mach 132 / Dhd 112 Shank
650946
381
15
650942
444
17.1/2
650943
476
18.3/4
650646
489
19.1/4
Face
Design
Type
Concave
Concave
Concave
Concave
Domed
Domed
Domed
Domed
Buttons
Qty
62 x 20mm / 30 x 16mm Wear
82 x 20mm / 30 x 16mm Wear
82 x 20mm / 30 x 16mm Wear
82 x 20mm / 30 x 16mm Wear
Over Weight
Size
(Kg)
Y
Y
Y
217
271
291
300
20
21
halcorocktools.com
79
12 ¨
MACH 142
One piece top-adaptor
reduces internal parts.
Revised chamber volumes and
cycle timing to optimize
performance.
The Mach 142 hammer accepts IR DHD112S shank
bits and is equipped with an oversized chuck to
accomodate this shank. This oversize chuck protects
the cylinder and prolongs its life. This hammer has a
pin drive arrangement to prevent metal to metal contact
thereby minimising spline wear and damage which can
result in drill bit shank failure. Mach 142 has a one piece
top-adaptor with N.R.V. (Non-Return-Valve) fitted for
easy inspection and service, with integral finger
to reduce maintenance and eliminate shimming which
increases service intervals.
100 - 350 psi (7 - 24 bar).
Air Consumption
4000
3500
3000
CFM
2500
2000
1500
1000
500
0
100
150
200
250
300
PSI
Available Shanks
IR DHD 112S
80
350
400
450
500
1
Hammer Overview
Hammer Type
Part Number
Shank
2
3
4
5
6
7
10
8
9
11
Mach 142
600143
Ingersoll Rand
Dhd 112s
N/A
688 Kg
273mm (10.748”)
1819mm (71.614”)
1600 Kg (3520 Lbs)
3500 Kg (7700 Lbs)
Top Thread
Flat Hammer Size
Weight
Outside Diameter
Make Up Length
Parts List
Hammer Type
Shank
Model Number
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Description
Lifting Cap
Circlip
O’Ring
N.r.v. Seat
Non Return Valve
N.r.v. Spring
Top-Adaptor
O’Ring
O’Ring
Top-Adaptor Spacer
Cylinder
Piston
Snap Ring
Bearing Bush
O’Ring
Containment Band
Bit Retaining Ring
Chuck Spacer
Drive Pins
Chuck
End Cap
Mach142
Dhd112s
600143
Part Number
602354
777001
768133
602286
602288
760055
602639
768137
768137
602366
602563
602532
783021
602531
768184
603819
602530
602985
600565
602529
741037
Service Kit
Repair Kit
Sk15
Rk24
Foot Valve
F/v Tool - Body
F/v Tool - Pusher
602522
602523
601813
12
Sk
rk
13
14
15
16
17
18
19
Drill Bits
Part
Diameter
Number
mm
Inch
Mach 142/Dhd 112S Shank
650018
438
17.1/4
650964
508
20
650907
610
24
653126
660
26
Face
Design
Type
Concave
Concave
Concave
Convex
Domed
Domed
Domed
Domed
Buttons
Qty
82 x 20mm / 18 x 16mm Wear
91 x 20mm / 36 x 16mm Wear
123 x 20mm / 66 x 16mm Wear
171 x 20mm / 39 x 16mm Wear
Over Weight
Size
(Kg)
Y
Y
Y
Y
354
470
512
600
20
21
halcorocktools.com
81
RC¨
RC 412
Top-adaptor sub suitable for most
dual wall drill pipe.
Internal screen for
collecting debris.
N.R.V. to prevent hammer flooding.
Easy sample tube removal with
large bore diameter.
The RC412 has been designed to give maximum
performance in Exploration and Grade Control
applications. These hammers have a one piece “integral
top-adaptor” which is robust and simple requiring no
make-up components, this gives reliability and ease
of service. At higher pressures the RC hammers make
easy going of even the hardest of rock structures.
RC412 is equipped with a bit catcher to help retrieve
shanked bits and collar the hole. The RC4/412 also has
a sub adaptor body to suit most dual wall drill pipe.
100 - 435 psi (7 - 30 bar).
Air Consumption
RC 412 Air Consumption
1100
1000
900
800
700
CFM
600
500
400
300
200
performance.
100
0
100
150
82
250
300
PSI
Available Shanks
Halco RC 412
Bit catcher to prevent loss of drill
bit and seal the hole for sampling.
200
350
400
450
500
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
15
18
19
17
20
Hammer Overview
Hammer Type
Part Number
Shank
Rc412
Top Thread
Weight
Outside Diameter
Make Up Length
Hammer Type
Shank
Model Number
Item
Description
Sub Adaptor Assy
1
O’Rings
2
Tube Connector
3
O’Rings
4
Sub Adaptor Body
5
Spider
6
Snap Ring
7
Sample Tube Spring
8
Upper Sample Tube
Base Hammer
9
Circlip
10
N.R.V. Seat & Filter
11
O’Ring
12
Quad-Ring Seal
13
Non Return Valve
14
N.R.V. Spring
15
Top-Adaptor Assy
16
O’Ring
17
O’Ring
18
Sample Tube
19
Cylinder
20
Piston
21
Snap Ring
22
Guide Bush
23
O’Ring
24
Bit Retaining Ring
25
O’Ring
26
Bit Catcher
27
Key
28
Chuck
Drill Bits
22
Part
Diameter
Number
mm Inch
Halco Rc 412
653178
121 4.3/4
653179
127
5
653177
130 5.1/8
653164
133 5.1/4
653194
136 5.3/8
25
26
Rc412
Remet 4”
600339
Part Numbers
600611
747120
603848
768099
603966
603821
777019
760139
603824
600608
777044
603823
768135
768148
603828
760140
603972
768127
768133
603917
603971
603831
783031
603921
768183
603920
792037
See Below
603142
603953
Metzke 4”
600341
Sk52
Rk86
Sk52
Rk86
Service Kit
Repair Kit
21
24
600341
Halco
Rc412
Metzke 4”
69 Kg
116mm (4.567”)
1393mm (54.842”)
Parts List
Sk
rk
23
600339
Halco
Rc412
Remet 4”
69 Kg
116mm (4.567”)
1393mm (54.842”)
Face
Design
Type
Concave
Concave
Concave
Concave
Concave
Domed
Domed
Domed
Domed
Domed
600613
603853
768099
603968
603821
777019
760139
603824
600608
777044
603823
768135
768148
603828
760140
603972
768127
768133
603917
603971
603831
783031
603921
768183
603920
792037
See Below
603142
603953
Buttons
Qty/dia
16 x 13mm
8x16mm/9x13mm
Weight
(Kg)
13.7
14.3
14.5
14.7
15.0
RC412 Bit Catcher
27
28
Outside Diameter
118.00 / 118.25
119.50 / 119.75
121.00 / 121.25
122.50 / 122.75
124.00 / 124.25
125.50 / 125.75
127.00 / 127.25
128.50 / 128.75
130.00 / 130.25
131.50 / 131.75
133.00 / 133.25
Part Number
603955
603956
603957
603958
603959
603960
603961
603962
603963
603923
604013
halcorocktools.com
83
RC¨
RC 5
Top-adaptor to suit most dual wall
pipe and screen.
N.R.V. (Non-Return-Valve)
to prevent hammer flooding.
Easy sample tube removal with
large bore diameter.
The Halco® RC5 has been designed to give maximum
performance in Exploration and Grade Control
applications. The new Halco® RC5 provides improved
performance and a robust design. With no inner liner,
the RC5 has a simple design that reduces complicated
maintenance procedures providing less down time
and greater savings. The Halco® RC5 is fitted with a
reversible cylinder to prolong service life in abrasive
conditions.
The Halco RC5 is equipped with a bit catcher
to help retrieve shanked bits and collar the hole.
The RC5 also has a sub adaptor body to suit
most dual wall drill pipe.
100 - 435 psi (7 - 30 bar).
Air Consumption
RC5 Air Consumption
Reversible cylinder for
extended life.
1000
900
800
700
performance.
CFM
600
500
400
300
200
100
0
100
150
200
250
300
PSI
Available Shanks
Bit catcher to prevent loss of drill
bit and seal the hole for sampling.
84
Halco RC5 Shank
350
400
450
500
1
Hammer Overview
Hammer Type
Part Number
Shank
2
3
Rc5
600371
Halco
Rc5
Remet 4 1/2”
81.6 kg
130mm (5.118”)
1285mm (50.600”)
Top Thread
Weight
Outside Diameter
Make Up Length
4
Parts List
5
Hammer Type
Shank
Model Number
Item
Description
1
Thread Protector
2
Top-Adaptor
3
O’Ring
4
Circlip
5
N.R.V. Seat & Filter
6
O Rings
7
O Rings
8
Upper Sample Tube
9
Non Return Valve
10
U Seal
11
N.R.V. Spring
12
Distributor Cap
13
O Ring
14
Shim 4.5mm
Shim 5.0mm
Shim 5.5mm
15
Ringfeder Spring
16
O’Ring
17
O’Ring
18
Air Distributor
19
Retaining Ring
20
Sample Tube
21
Piston
22
Cylinder
23
Retaining Ring
24
Piston Guide Bush
25
Snap Ring
26
Bit Retaining Rings
27
O Ring
28
Bit Catcher
29
Bit Catcher Key
30
Chuck *
31
End Cap
6
7
8
9
10
11
12
13
14
15
16
17
18
20
19
22
21
23
Sk
rk
24
Drill Bits
25
26
27
28
29
Part
Number
Halco Rc
653199
653200
653321
653201
653202
653203
653214
Rc5
Service Kit
Repair Kit
Diameter
Mm
Inch
137
140
143
146
156
159
190
5.3/8
5.1/2
5.5/8
5.3/4
6.1/8
6.1/4
7.1/2
Rc5
600372
Halco
Rc5
Hetzke 4.1/2”
81.6 kg
130mm (5.118”)
1285mm (50.600”)
Remet 4 1/2”
600371
Part Number
741027
604222
768165
756015
604223
768041
747121
604262
604225
748098
760115
604291
768133
604226
604227
604228
760109
768045
768127
604236
604313
604290
604244
604218
604313
604242
783009
604019
768091
See Below
603142
604011
741053
Metzke 4 1/2”
600372
Part Number
741027
604239
768165
756015
604223
768041
604261
604225
748098
760115
604291
768133
604226
604227
604228
760109
768045
768127
604236
604313
604290
604244
604218
604313
604242
783009
604019
768091
See Below
603142
604011
741053
Sk62
Rk96
Sk63
Rk97
Face
Design
Type
Concave
Concave
Concave
Concave
Concave
Concave
Concave
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Buttons
Qty/dia
8 x 16mm/5 x 13mm/4 x 14mm
8 x 16mm/5 x 13mm/4 x 14mm
8 x16mm/6 x 16mm
8 x 16mm/5 x 13mm/4 x 14mm
12 x 16mm/5 x 13mm
12 x 16mm/5 x 13mm
16 x 16mm/10 x 13mm
Weight
(Kg)
18.5
18.7
20.6
18.9
20.0
21.0
24.0
30
31
Outside Diameter
133.00 / 133.25
136.00 / 136.25
139.00/139.25
142.00 / 142.25
152.00 / 152.25
155.50 / 155.25
185.00 / 185.25
Part Number
604030
604016
604356
604031
604032
604033
604102
halcorocktools.com
85
SIM-CAS OVERVIEW
What is the Sim-Cas system?
The Sim-Cas continuous casing system
was designed to overcome the problems
of drilling in soft and loose ground
conditions where a stable cased hole
was required.
The Sim-Cas system achieves this
by enabling the “down-the-hole” drill
string and casing to be lowered
simultaneously. A down the hole hammer
is used to which is fitted a driver and
a one-piece eccentric bit.
The sim-cas system can be used
on all 3 shank design:
• Halco
• Mission
• I.R
What are the advantages of the
Sim-Cas system?
The Sim-Cas system has a 3 pin
retention system with an eccentric bit to
drill a larger diameter than the following
casing. Because of the 2 piece design
of the driver andeccentric bit, the system
is easily retracted and redrawn from the
casing and unlike some other systems
which have difficulty retracting. The
eccentric bit has heavy duty tungsten
carbide wear gauge inserts to extend
the drill bit life. When the eccentric bit
extends, the pilot bit centralizes the
hammer to help drill straight holes.
86
The large exhaust paths on the eccentric
bit help remove the drill bit cuttings.
On operating the Sim-Cas system when
the eccentric bit extends, the design
blanks off the access point of the
retention pin on the driver. The Sim-Cas
system can be used in any angle from
the horizontal.
What is the “Shoe Drive”
Sim-Cas system?
This system permits the casing to be
hammered into the ground. This is
achieved by a shoulder on the driver,
which impacts onto a shouldered casing
shoe that is welded to the lead length of
casing. With the shoe drive system, the
use of a stabilizer is not required.
THE SIM-CAS SYSTEM
EXPLAINED
Drilling into the ground, the eccentric
bit rotates outwards to drill
a larger diameter hole than the
following casing.
1
2
This enables the entire drill string to be
pulled out, leaving the casing
situated in the bedrock.
3
After reaching the required cased depth
the drill string is rotated in the opposite
direction, the eccentric bit is then
withdrawn into the casing.
Drilling can then be continued using a
standard DTH button bit through the
casing.
4
halcorocktools.com
87
SIM-CAS
SIM-CAS 33
5
The Sim-Cas 33 Shoedrive system is designed
to be used with either threaded or welded casing
with a recommended outside diameter of 114mm
(4 1/2”) and an inside diameter of 101.6mm (4”).
When in operation the eccentric bit extends to
produce a bore size of 128mm reducing to 91mm
when it is retracted.
The casing drive shoe is available with either
a spigot type connection or a face butting type
connection. The internal diameter of the casing
drive shoe is 92.5mm. This enables a button bit
with a diameter of 91.5mm (or less) to be used
to drill through the casing if required.
An optional stabilizer is available.
Available Shanks
MACH 303
IR DHD 3.5
3
88
Technical Specifications
Sim-Cas 33
Description
Eccentric Bit
Reamer Dia. Extended
Reamer Dia. Retracted
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
mm
Inches
128
91
5.04
3.58
114
101.6
5
92
4.5
4.0
0.2
3.62
Parts List
8
Sim-Cas 33
Mach 303
IR DHD 3.5
Part Numbers
651011
651011
650344
650096
207193
207193
207199
207199
207169
207169
206361
206361
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
Drive Shoe (Spigot Type)
4
Drive Shoe (Face Butting Type)
Breakout Spanner For Driver
5
Stabiliser
Spare Parts for Driver
2
6
7
8
Short Cross Pin
Long Cross Pin
Spirol Pin
602650
602642
787054
602650
602642
787054
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
DRIVE Shoe
SHOE &
6
7
LEAD CASING
LENGTH W
SPIGOT TYPE
LEAD CASING
SPIGOT DRIVE SHOE
PART NUMBER 207193
A
100
B
101.1 / 100.9
C
114
D
92.5
E
55
F
30o
G
4.5
LEAD CASING
W
1317
X
101.2 / 101.4
Y
48 / 50
Z
Y
BORE X
B
F
F
D
45O
45O
G
45
C
G
All Dimensions shown in Millimeters unless
otherwise stated
FACE BUTTING TYPE
LEAD CASING
LENGTH W
1
A
E
45O
3
LEAD CASING
5mm
O
S
SHOE
L*
F
D
45
A
45
O
G
G
C
O
FACE BUTTING SHOE
PART NUMBER 207199
L*
200
A
100
D
92.5
S
101
C
114
F
30o
G
4.5
LEAD CASING
W
1172
4
L* = Minimum Length
otherwise stated
halcorocktools.com
89
SIM-CAS
SIM-CAS 44
5
(5 5/8”) and an inside diameter of 126mm (5”).
produce a bore size of 155mm (6 1/8”) reducing
to 115mm (4 1/2”) when it is retracted.
Available Shanks
Mach 44
A35-15 (SD4)
IR DHD 340
3
90
Sim-Cas 44
Description
9
Eccentric Bit
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
mm
Inches
155
115
6.10
4.53
142
126
5
116
5.6
5.0
0.2
4.57
Spare Parts
8
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
4
5
Stabiliser
Spare Parts for Drivers
2
6
7
8
9
651009
650899
207194
207200
204321
206351
Sim-Cas 44
A35-15 (SD4)
Part Numbers
651009
650919
207194
207200
204321
206351
602641
602640
603807
787053
602641
602640
603807
787053
Mach 44
Short Cross Pin
Long Cross Pin
Solid Retention Pin
Spirol Pin
IR DHD 340
651009
650088
207194
207200
204321
206351
602641
602640
603807
787053
DRIVE Shoe
SHOE &
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
LEAD CASING
LENGTH W
SPIGOT TYPE
6
LEAD CASING
SPIGOT DRIVE SHOE
PART NUMBER 207194
A
130
B
127.1 / 126.9
C
142
D
117.5
E
75
F
30o
G
4.5
LEAD CASING
(MACH 44) 1565
W
(S-DOM 400) 1610
X
127.2 / 127.4
Y
58 / 60
Z
5.0
Z
Y
BORE X
B
7
F
F
D
45O
45O
G
C
E
G
otherwise stated
FACE BUTTING TYPE
LEAD CASING
LENGTH W
45
A
45O
3
LEAD CASING
5mm
O
1
S
SHOE
L*
F
D
A
45O
45O
G
G
C
FACE BUTTING SHOE
PART NUMBER 207200
L*
250
A
130
D
117.5
S
127
C
142
F
30o
G
4.5
LEAD CASING
(MACH 44) 1390
W
(S-DOM 400) 1435
4
L* = Minimum Length
otherwise stated
halcorocktools.com
91
SIM-CAS
SIM-CAS 55
5
drive shoe is 142mm. This enables a button bit
with a diameter of 141mm (or less) to be used
Available Shanks
Mach 50
A43-15 (SD5)
IR DHD 350
3
92
Sim-Cas 55
Description
9
Eccentric Bit
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
mm
Inches
190
140
7.48
5.51
171
152
5.6
141
6.7
6.0
0.22
5.55
Spare Parts
8
2
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
4
5
Stabiliser
6
7
8
9
6
651012
650345
207195
207201
203249
206354
Sim-Cas 55
A43-15 (SD5)
Part Numbers
651012
650916
207195
207201
203249
206354
602627
602626
603748
787053
602627
602626
603748
787053
Mach 50
Short Cross Pin
Long Cross Pin
Solid Retention Pin
Spirol Pin
IR DHD 350
651012
650086
207195
207201
203249
206354
602627
602626
603748
787053
DRIVE Shoe
SHOE &
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
LEAD CASING
LENGTH W
SPIGOT TYPE
7
LEAD CASING
SPIGOT DRIVE SHOE
PART NUMBER 207195
A
125
B
154.1 / 153.9
C
171
D
142
E
60
F
45o
G
4.5
LEAD CASING
(MACH 50) 1540
W
(DOM 500) 1510
X
154.2 / 154.5
Y
68 / 70
Z
5.6
Z
Y
BORE X
B
F
F
D
45O
45O
A
45O
G
C
E
G
3
otherwise stated
1
LEAD CASING
LENGTH W
FACE BUTTING TYPE
45
LEAD CASING
5mm
O
S
SHOE
L*
F
D
A
45O
45O
G
G
C
FACE BUTTING SHOE
PART NUMBER 207201
L*
250
A
125
D
142
S
152
C
171
F
45o
G
4.5
LEAD CASING
(MACH 50) 1350
W
(DOM 500) 1320
4
L* = Minimum Length
otherwise stated
halcorocktools.com
93
SIM-CAS
SIM-CAS 66
5
Available Shanks
Mach 60
A53-15 (SD6)
IR DHD 360
3
94
Sim-Cas 66
Description
9
8
Eccentric Bit
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
mm
Inches
219
165
8.62
6.5
195
179
5.6
168
7.7
7.0
0.22
6.62
Spare Parts
2
6
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
4
5
Stabiliser
Mach 60
651013
650346
207196
207202
207170
206355
6
7
8
9
7
Short Cross Pin
Long Cross Pin
Solid Retention Pin
Spirol Pin
Sim-Cas 66
A53-15 (SD6) IR DHD 360
Part Numbers
651013
651013
650917
650085
207196
207196
207202
207202
207170
207170
206355
206355
602625
602624
603748
787053
602625
602624
603748
787053
602625
602624
603748
787053
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
DRIVE Shoe
SHOE &
LEAD CASING
LENGTH W
SPIGOT TYPE
LEAD CASING
SPIGOT DRIVE SHOE
PART NUMBER 207196
A
125
B
179.1 / 178.9
C
195
D
168.5
E
75
F
45o
G
4.5
LEAD CASING
W
1725
X
179.2 / 179.5
Y
52 / 55
Z
5.6
Z
Y
BORE X
B
1
F
F
D
45O
45O
A
E
45O
G
C
G
3
otherwise stated
LEAD CASING
LENGTH W
FACE BUTTING TYPE
LEAD CASING
5mm
45O
S
SHOE
L*
F
D
45
A
45
O
G
G
C
O
FACE BUTTING SHOE
PART NUMBER 207202
L*
250
A
125
D
168.5
S
179
C
195
F
45o
G
4.5
LEAD CASING
W
1550
4
L* = Minimum Length
otherwise stated
5
halcorocktools.com
95
SIM-CAS
SIM-CAS SUPER 66
5
The Sim-Cas Super 66 Shoedrive system is
designed to be used with either threaded or
welded casing with a recommended outside
diameter of 219mm (8 5/8”) and an inside
diameter of 198.4 mm (7 13/16”).
Available Shanks
Mach 60
A53-15 (SD6)
IR DHD 360
3
96
Sim-Cas Super 66
Description
9
8
2
6
Eccentric Bit
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
Inches
243
191
9.57
7.52
219
198.4
5.6
192
8.6
7.8
0.22
7.56
Spare Parts
Sim-Cas Super 66
Mach 60
A53-15 (SD6)
Part Numbers
651010
651010
650340
650921
207197
207197
207203
207203
207171
207171
206357
206357
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
4
5
Stabiliser
6
7
8
9
7
mm
Short Cross Pin
Long Cross Pin
Solid Retention Pin
Spirol Pin
602656
602655
603748
787053
602656
602655
603748
787053
IR DHD 360
651010
650975
207197
207203
207171
206357
602656
602655
603748
787053
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
DRIVE Shoe
SHOE &
LEAD CASING
LENGTH W
SPIGOT TYPE
LEAD CASING
SPIGOT DRIVE SHOE
PART NUMBER 207197
A
125
B
204.1 / 203.9
C
219
D
193
E
60
F
45o
G
4.5
LEAD CASING
W
1780
X
204.2 / 204.5
Y
68 / 70
Z
5.6
Z
Y
BORE X
B
1
F
F
D
45O
45O
A
45O
G
C
E
G
3
otherwise stated
LEAD CASING
LENGTH W
FACE BUTTING TYPE
LEAD CASING
FACE BU TTING SH OE
P ART NU M BE R 207203
5mm
45O
S
SHOE
L*
F
L*
A
D
S
C
F
G
4
250
125
193
199
219
45o
4.5
LEAD CASING
D
A
45O
45O
G
G
C
W
1590
L* = Minimum Length
otherwise stated
halcorocktools.com
97
SIM-CAS
SIM-CAS SUPER 66 HD
5
The Sim-Cas Super 66 HD Shoedrive system
is designed to be used with either threaded or
welded casing with a recommended outside
diameter of 222mm (8 3/4”) and an inside
diameter of 205mm (8 1/16”).
Available Shanks
IR DHD 360
IR DHD 380
3
98
Sim-Cas Super 66 HD
Description
9
Eccentric Bit
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
6
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
4
5
Stabiliser
6
7
8
9
7
Inches
243
191
9.57
7.52
222
205
6.3
192
8.74
8.07
0.25
7.56
Sim-Cas Super 66 HD
IR DHD 360
IR DHD 380
Part Numbers
651017
651017
653243
653244
207197
207197
207203
207203
207171
207171
206357
206357
8
2
mm
Short Cross Pin
Long Cross Pin
Solid Retention Pin
Spirol Pin
602656
602655
603893
787040
602656
602655
603893
787040
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
DRIVE Shoe
SHOE &
LEAD CASING
LENGTH W
SPIGOT TYPE
LEAD CASING
SPIGOT DRIVE SHOE
PART NUMBER 207197
A
125
B
204.1 / 203.9
C
219
D
193
E
60
F
45o
G
4.5
LEAD CASING
W
1780
X
204.2 / 204.5
Y
68 / 70
Z
5.6
Z
Y
BORE X
B
F
F
D
1
45O
45O
A
E
45O
G
C
G
3
otherwise stated
LEAD CASING
LENGTH W
FACE BUTTING TYPE
LEAD CASING
5mm
45O
S
SHOE
L*
F
D
45
A
45
O
G
G
C
O
FACE BUTTING SHOE
PART NUMBER 207203
L*
250
A
125
D
193
S
199
C
219
F
45o
G
4.5
LEAD CASING
W
1590
4
L* = Minimum Length
otherwise stated
halcorocktools.com
99
SIM-CAS
SIM-CAS 88
5
The Sim-Cas 88 Shoedrive system is designed to
be used with either threaded or welded casing with
a recommended outside diameter of 273mm (10
3/4”) and an inside diameter of 254.5 mm (10”).
drive shoe is 237mm. This enables a button bit with
a diameter of 236mm (or less) to be used
Available Shanks
Mach 80
A63-15 (SD8)
DHD 380
3
100
Sim-Cas 88
Description
Eccentric Bit
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
2
8
282
218
11.10
8.62
257
241
6.3
219
10.1
9.40
0.24
8.62
6
7
8
9
Sim-Cas 88
A63-15 (SD8)
Part Numbers
651006
650920
207198
207204
207172
206362
Mach 80
651006
650895
207198
207204
207172
206362
7
Inches
Spare Parts
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
4
5
Stabiliser
6
mm
Short Cross Pin
Long Cross Pin
Spirol Pin
Rubber Plug
602623
602622
787053
792038
602623
602622
787053
792038
IR DHD 380
651006
650087
207198
207204
207172
206362
602623
602622
787053
792038
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
DRIVE Shoe
SHOE &
9
LEAD CASING
LENGTH W
LEAD CASING
SPIGOT DRIVE SHOE
PART NUMBER 207198
A
125
B
240.6 / 240.4
C
257
D
220
E
75
F
45o
G
8.5
LEAD CASING
W
1835
X
240.7 / 241.2
Y
52 / 55
Z
6.3
Z
Y
BORE X
B
F
F
D
45O
45
O
A
E
45O
G
C
G
3
otherwise stated
FACE BUTTING TYPE
LEAD CASING
LENGTH W
1
SPIGOT TYPE
LEAD CASING
5mm
45O
S
SHOE
L*
F
D
45
A
45
O
G
G
C
O
FACE BUTTING SHOE
PART NUMBER 207204
L*
250
A
125
D
220
S
236
C
257
F
45o
G
8.5
LEAD CASING
W
1660
4
L* = Minimum Length
otherwise stated
halcorocktools.com
101
SIM-CAS
SIM-CAS SUPER 88
5
The Sim-Cas Super 88 Shoedrive system is
designed to be used with either threaded or welded
casing with a recommended outside diameter of
273mm (10 3/4”) and an inside diameter of 254.5
mm (10”).
drive shoe is 237mm. This enables a button bit with
a diameter of 236mm (or less) to be used
Available Shanks
Mach 80
A63-15 (SD8)
IR DHD 380
3
102
Sim-Cas Super 88
Description
8
7
2
5
Eccentric Bit
Casing
Recommended O/D
Minimum I/D
Min. Wall Thickness
Shoe Min. I/D
Inches
308
235
12.13
9.25
273
254.5
9.2
237
10.7
10.0
0.36
9.33
Spare Parts
Model Number
Item
Description
1
Eccentric Bit
2
Driver
3
4
Stabiliser
Mach 80
5
6
7
8
6
mm
Short Cross Pin
Long Cross Pin
Solid Retention Pin
Spirol Pin
651016
653153
207206
604280
604279
Sim-Cas Super 88
A63-15 (SD8)
IR DHD 380
Part Numbers
651016
651016
653156
653154
207206
207206
604280
604280
604279
604279
602623
602622
603983
787040
602623
602622
603983
787040
602623
602622
603983
787040
Drive
& LEAD
LeadCASING
CasingDIMENSIONS
Dimensions
DRIVE Shoe
SHOE &
1
LEAD CASING
LENGTH W
SPIGOT TYPE
LEAD CASING
Z
Y
BORE X
B
F
F
D
45O
45O
G
A
45
C
O
G
E
SPIGOT DRIVE SHOE
PART NUMBER 207206
A
125
B
254.1 / 253.9
C
273
D
237
E
75
F
45o
G
8.5
LEAD CASING
W
1835
X
254.2 / 254.7
Y
52 / 55
Z
9.2
3
otherwise stated
halcorocktools.com
103
Air Consumption
3600
Mach122
132, 142
SDom1200
12 inch
3400
3200
3000
Dom 1000
10 Inch
2800
2600
2400
2200
CFM
2000
Dom 750
7 Inch
1800
Dom 600
SDom 600
SDom 650
6 Inch
1600
Dom 800
8 Inch
1400
1200
Dom 500
SDom 500
SDom550 HD
5 Inch
1000
SDom 400
4 Inch
800
Dom 375
3 Inch
Mach 20
2 Inch
600
400
Dom 100
1 Inch
200
0
100
150
200
250
300
350
PSI
104 104
Page
400
450
500
550
CONVERSION TABLE
Air Volume Example
1 cc = .001 Litre 1000 cc = 1 Litre
1 Litre = .001 M 1000 Litres = 1 M3
3
Air Flow
1 CFM = 0.0283 M3/Min 100 CFM = 2.83 M3/Min
1 CFM = 0.4719 Litre/Sec 100 CFM = 47.19 Litre/Sec
1 M3/Min = 35.315 CFM 1
0 M3/Min = 353.15 CFM
1 M /Min = 16.667 Litre/Sec 10 M3/Min = 166.67 Litre/Sec
1 Litre/Sec = 2.1189 CFM 100 Litre/Sec = 211.89 CFM
1 Litre/Sec = 0.0600
M3/Min 100 Litre/Sec = 6.00 M3/Min
Air Pressure
Example
1 PSI = 0.0689 bar 100 PSI = 6.89 bar
1 PSI = 0.0703 Kg/CM2 100 PSI = 7.03 Kg/CM2
1 PSI = 0.0680 ATM (Atmosphere) 100 PSI = 6.80 ATM
1 bar = 14.504 PSI 10 bar = 145.04 PSI
1 bar = 1.0197 Kg/CM2 10 bar = 10.197 Kg/CM2
1 bar = 0.9869 ATM 10 bar = 9.869 ATM
1 ATM = 14.696 PSI 10 ATM = 146.96 PSI
1 ATM = 1.0132 bar 10 ATM = 10.132 bar
1 ATM = 1.0332 Kg/CM2 10 ATM = 10.332 Kg/CM2
3
Velocity
Example
1 M/Min = 3.2808 Ft/Min 1000 M/Min = 3280.80 Ft/Min
1 M/Min = 0.0167 M/Sec 1000 M/Min = 16.70 M/Sec
1 Ft/Min = 0.3048 M/Min 1000 Ft/Min = 304.80 M/Min
1 Ft/Min = 0.0051 M/Sec 1000 Ft/Min = 5.10 M/Sec
1 M/Sec = 60.00 M/Min 10 M/Sec = 600 M/Min
1 M/Sec = 196.85 Ft/Min 10 M/Sec = 1968.50 F
Torque
Example
1 lbft = 0.1383 KGM 1000 lbft = 138.30 KGM
1 lbft = 1.3558 Nm 1000 lbft = 1355.80 Nm
1 lbft = 12.00 lbin 1000 lbft = 12000 lbin
1 KGM = 7.233 lbft 100 KGM = 723T.30 lbft
1 KGM = 9.8067 Nm 100 KGM = 980.67 Nm
1 KGM = 86.796 lbin 100 KGM = 8679.60 lbin
1 lbin = 0.0833 lbft 1000 lbin = 83.30 lbft
1 lbin = 0.0115 KGM 1000 lbin = 11.50 KGM
1 lbin = 0.1130 Nm 1000 lbin = 113 Nm
halcorocktools.com
Page 105
NOTES
106 106
Page
halcorocktools.com
Page 107
OUR COMMITMENT
TO YOU
Our aim is to provide excellent service
that reflects your needs and exceeds
your expectations. Our trained customer
support team is dedicated to providing
you what you want and when you need it.
With over 60 years experience in assisting
customers with their drilling applications,
our support team has gained the expertise
to provide an accurate and timely
response.
WARRANTY
Our warranty on hammers and bits
provides you an ease of mind that any
problem that might occur will be solved
quickly and effectively by our experienced
customer support team.
TRAINING SESSIONS
Training is available at any of our
locations. Our distributors are trained
and available locally for support as well.
Training includes selection, service,
maintenance and repair.
TECHNICAL SUPPORT
Technical support is always ready to
assist you. Whether you need service
or maintenance tips, troubleshooting,
or advice on a repair, help is only
a phone call away.
Halco Rock Tools Limited
PO Box 25, West lane
Southowram, Halifax, HX3 9TW
Tel: + 44 (0) 1422 399900
Fax: + 44 (0) 1422 330186
Email: [email protected]
Halco America Inc.
3501 S. FM Hwy. 1417
Denison, TX 75020
Tel: + 1 903 337 4190
Fax: + 1 903 337 4191
Email: [email protected] Halco Australia
2 Reid Road, Perth International Airport,
Perth WA61054
Tel: + 61 8 9248 4144
Fax: + 61 8 9248 4155
Email:[email protected]
for more info visit:
www.halcorocktools.com
Halco Rock Tools
Quality Management System
is Certified to ISO9001: 2008
Certificate No: LRQ 0850659
Our service engineers are happy to make
on-site visits too.
PUBLICATIONS
When you want to learn more about
DTH drilling or product maintenance to
improve efficiency, we have established 4
books to help you.
•
•
•
•
A to Z of DTH Drilling
DTH maintenance manual
DTH maintenance RC hammers
Maintenance Sim-Cas
We are committed to help our
customers realise their full potential.
Just as we constantly innovate and
improve our hammers and bits,
we want to continually evolve our
company to be in the best position
to accelerate new technologies as they
emerge and to better serve
our customers.

Available Shanks

Transcription

Similar documents

your drilling expert

Product catalogue

positioners

Down-the-hole (DTH) bits

your global drilling partner