Uninterruptible Power Supply (UPS)

Transcription

Uninterruptible Power Supply (UPS)
Win Dialog Plus / Net Dialog (400VA ~ 2000VA)
Line interactive, Pseudo sinewave
 Single phase input / output
 Microprocessor control and mains power supply stabilisation
 Fast battery charger
 Wide input voltage range and pseudo sinewave regulated output voltage
 Frequency auto learning
 DC start up function
 Efficiency superior than 98% (energy saving)
 Compact size, light weight, designed for any kind of application
 Low audible noise level, serial port RS - 232, USB
 Integrated protection for PC networks and telephone line/modem connections
 CD shutdown sorfware, file protection
 Auto restart at power-up (Net Dialog)
 Warranty 24 months
MODEL
TYPE
POWER VA/W
CODE
Win Dialog Plus
Win Dialog Plus
WP 40U
WP 60U
ND 80
ND 100
ND 150
ND 200
400VA/240W
600VA/360W
800VA/480W
1000VA/600W
1500VA/900W
2000VA/1200W
010.10.010
010.10.020
010.10.030
010.10.040
010.10.050
010.10.060
Line Interactive, Pseudo sinewave
AUTONOMY (min)
(100% of load)
6
AUTONOMY (min)
(70% of load)
10
RECHARGE TIME
(90%) (hours)
WEIGHT (Kg)
Net Dialog
Net Dialog
SYSTEM
DIMENSIONS (mm)
HxWxD
ITALY
6-8
4-6
152 x 110 x 325
5.8
180 x 140 x 375
5.8
14
214 x 140 x 410
14.5
15
20
Dialog Vision (500VA ~ 2000VA)
Line interactive, Sinewave, Microprocessor control
 Fast battery charger
 Wide input voltage range and sinewave regulated output voltage
 Automatic battery test and Frequency auto learning
 DC start up function
 Efficiency superior than 98% (energy saving)
 Compact size, light weight, designed for any kind of application
 Low audible noise level, serial port RS - 232, USB
 CD shutdown sorfware, file protection
 Warranty 24 months
 All models of Dialog Vision can be mounted in 19’’ rack mount cabinets
(upon request)
MODEL
TYPE
POWER VA/W
CODE
Dialog Vision
DVT 50
DVT 80
DVT 110
DVT 150
DVT 200
500VA/350W
800VA/540W
1100VA/740W
1500VA/1050W
2000VA/1350W
010.15.010
010.15.020
010.15.030
010.15.040
010.15.050
SYSTEM
Line Interactive, Sinewave output
AUTONOMY 100% (min)
5
AUTONOMY 70% (min)
10
RECHARGE TIME (90%)
(hours)
4-6
DIMENSIONS (mm)
HxWxD
WEIGHT (Kg)
235 x 110 x 383
7.2
10.6
235 x 160 x 425
11
18
18.4
1
Dialog Plus (700VA ~ 3000VA)
On Line, Double conversion, Sinewave, Transformerless,
Microprocessor control, Autonomy extension capability
ITALY
 Double conversion: it converts from AC to DC and from DC to AC
 Low input voltage harmonic distortion
 Self diagnose, Display panel for a complete UPS management
 Automatic and Service By-Pass, Automatic and manual battery test
 Autonomy extension capability, Low acoustic noise
 RS-232 serial port, USB και SNMP capability
 Soft start and auto power off
 CD shutdown sorfware, File protection, Warranty 24 months
 All models can be mounted in 19’’ rack mount cabinets (upon request)
MODEL
Dialog Plus (1phase/1phase)
TYPE
POWER VA/W
CODE
DLP 70
DLP 100
DLP 150
DLP 200
700VA/490W
1000VA/700W
1500VA/1050W
2000VA/1400W
010.20.010
010.20.020
010.20.030
010.20.040
SYSTEM
On Line, Double Conversion
AUTONOMY 100% (min)
6
AUTONOMY 70% (min)
10
RECHARGE TIME (90%) (h)
7
6
11
11
10
18
2-4
DIMENSIONS: H x W x D (mm)
4
231 x 158 x 400
WEIGHT (Kg)
12
231 x 158 x 500
340 x 192 x 460
19
34
14
Dialog Dual (3300VA ~ 10KVA)
On Line, Double conversion, Sinewave, VFI technology, Microprocessor
control, Autonomy extension capability
 Single phase input / output or Three phase input / Single phase output
 It can be placed directly onto the floor or mounted in 19’’ RACK mount cabinets
 Hot Swappable user replaceable batteries
 VFI technology: voltage and frequency are independent from mains power supply
distortion
 Low input voltage harmonic distortion, Self diagnose
 Automatic By-Pass, Αυτόµατος, Automatic and manual battery test
 Autonomy extension capability
 Low acoustic noise, Outputs No.2 RS-232 USB
 CD shutdown sorfware, File protection, Warranty 24 months
Ideal solution even for the most
demanding applications
MODEL
Dialog Dual M/M (1phase/1phase)
TYPE
DLD 330
DLD 400
DLD 500
DLD 600
DLD 800
DLD 1000
DLD650ΤΜ
DLD800ΤΜ
DLD1000ΤΜ
POWER
VA/W
3300VA
2300W
4000VA
2400W
5000VA
3500W
6000VA
4200W
8000VA
6400W
10000VA
8000W
6500VA
5200W
8000VA
6400W
10000VA
8000W
010.25.010
010.25.020
010.25.030
010.25.040
010.25.050
010.25.060
010.25.070
010.25.080
010.25.090
CODE
SYSTEM
ΑΥΤΟΝ.
100% min
AUTONOMY
70% min
6
5
10
8
8
6
8
8
6
11
9
15
12
13
10
13
13
10
RECH. TIME
90% (h)
DIMENSIONS
HxWxD mm
WEIGHT (Kg)
2
Dialog Dual T/M (3phase/1phase)
4-6
455 x 175 x 520
455 x 175 x 660
38
62
40
64
2 x (455 x 175 x 660)
80
85
2 x (455 x 175 x 660)
64
80
85
Multi Plus (10 ~ 40KVA) & Multi Dialog (60 ~ 80KVA)
On Line, Double conversion, Sinewave, Transformerless,
Microprocessor control, Autonomy extension capability, Static by-pass
 Single phase input / output or Three phase input / single phase output
 EMI filters for even lower harmonic distortions
 Redundant parallel architecture (up to 6 units: Multi Plus,
up to 8 units: Multi Dialog)
 High input power factor
 Microprocessor control
 Mains power supply stabilisation
 Wide input voltage range
 Sinewave regulated output voltage
 High operating efficiency
 Self diagnose
 Display panel for a complete UPS management
 Automatic and Service By-Pass
 Automatic and manual battery test
 Autonomy extension capability
 Low acoustic noise
 RS-232 serial port, ΕΡΟ and contacts port
 Remote display panel
 Fan speed regulation
 CD shutdown sorfware
 File protection
 Economy mode for energy saving
 SNMP capability and Modem
MODEL
ITALY
Multi Plus T/M (3phase/1phase)
TYPE
POWER VA/W
CODE
MLM 10
MLM 12
MLM 15
MLM 20
10KVA / 8KW
12KVA / 9.6KW
15KVA / 12KW
20KVA / 16KW
010.35.010
010.35.020
010.35.030
010.35.040
SYSTEM
AUTONOMY 100% (min)
12
9
RECHARGE TIME (90%) (h)
WEIGHT (Kg)
CODE
180
182
MLT 10
MLT 12
MLT 15
MLT 20
MLT 30 X
MLT 40 X
10KVA / 9KW
12KVA / 10.8KW
15KVA / 13.5KW
20KVA / 18KW
30KVA / 27KW
40KVA / 36KW
010.35.050
010.35.060
010.35.070
010.35.080
010.35.090
010.35.100
8
5
12
9
5
RECHARGE TIME
(90%) (h)
5
6 h (90%)
DIMENSIONS:
H x W x D (mm)
WEIGHT(Kg)
195
Multi Plus T/T (3phase/3phase)
SYSTEM
AUTONOMY
100% (min)
190
930 x 320 x 840
MODEL
POWER VA/W
5
6 h (90%)
DIMENSIONS: H x W x D (mm)
TYPE
5
930 x 320 x 840
180
182
190
1600x440x850
195
335
350
 There are also available the following UPS Series: Multi Dialog (MDT60-80KVA) T/T και Master Dialog
(RM8-100KVA) T/M & (RM10-80KVA)T/Τ : UPON REQUEST
3
Inverters from 12 / 24V DC to 230V AC
 Input voltage:
10V ~ 15V DC (G12)
20V ~ 30V DC (G24)
 Output voltage: 230V AC, Pseudo sinewave
 Frequency: 50 - 60ΗΖ
 Overload protection
 Unsuitable for motors
POWER
(W)
LOW BATTERY
INDICATION
DIMENSIONS
mm
WEIGHT
Kg
CODE
12V DC (G12)
CODE
24V DC (G24)
G12 - 015A / G24 - 015A
150
DC 10.5V ± 0.5V
162 x 104 x 58
0.7
028.10.010
028.15.010
G12 - 030 / G24 - 030
300
DC 10.5V ± 0.5V
232 x 104 x 58
0.9
028.10.020
028.15.020
G12 - 050 / G24 - 050
500
DC 10 - 15V
220 x 180 x 68
1.9
028.10.040
028.15.040
G12 - 060 / G24 - 060
600
DC 10.5V ± 0.5V
290 x 205 x 73
2.1
028.10.050
028.15.050
G12 - 080 / G24 - 080
800
10.7V
330 x 240 x 77
2.7
028.10.060
028.15.060
G12 - 100 / G24 - 100
1000
DC 9.5V ± 0.5V
430 x 242 x 80
3.7
028.10.070
028.15.070
G12 - 150 / G24 - 150
1500
10.7V
430 x 240 x 77
3.8
028.10.080
028.15.080
G12 - 200 / G24 - 200
2000
10.7V
330 x 190 x 70
3.4
028.10.090
028.15.090
TYPE
Fast battery chargers
 Two settings: high and low
 Input voltage: 230V AC +10%
 Frequency: 50 - 60ΗΖ
TYPE
AMPERE
(A)
VOLT
(V)
CODE
GCA
20
12
032.10.010
GCA
20
24
032.10.020
GCA
30
12
032.10.030
GCA
30
24
032.10.040
Battery chargers, portable and for panels
 Input voltage: 230V AC
 Fuses in input and output
 Charging indicating led
 Maintenance indicating led
4
Smart chargers which
charge and maintain
the batteries!
TYPE
RANGE
(AΗ)
VOLT
(V)
CODE
BC - 1
7.5 - 37.5
12
032.15.010
BC - 2
7.5 - 37.5
24
032.15.020
BC - 4
15 - 75
12
032.15.030
BC - 5
15 - 75
24
032.15.040
BC - 6
30 - 150
12
032.15.050
BC - 7
30 - 150
24
032.15.060
BC - 8
45 - 225
12
032.15.070
BC - 9
45 - 225
24
032.15.080
in blister pack
SVC Electromechanical stabilizers, 3phase, 3KVA ~ 500KVA
3PHASE INPUT / 3PHASE OUTPUT
120V ~ 260V INPUT FOR EACH PHASE, 50/60ΗΖ
POWER
(KVA)
POWER
(KW)
DIMENSIONS
H x W x D (mm)
WEIGHT
(Kg)
6
4.2
690 x 280 x 355
22.7
018.12.020
9
6.3
770 x 320 x 355
40.6
018.12.030
15
12.0
768 x 317 x 412
66.0
018.12.040
22.5
18.0
778 x 423 x 390
88.0
018.12.050
30
24.0
983 x 440 x 430
105.0
018.12.060
40
32.0
854 x 651 x 460
160.0
018.12.070
50
40.0
989 x 702 x 508
195.0
018.12.080
60
48.0
989 x 702 x 508
220.0
018.12.090
75
60.0
950 x 560 x 640
257.0
018.12.100
90
72.0
1315 x 670 x 560
286.0
018.12.110
100 - 500
80 - 400
-
-
On request
CODE
 Protection for overcurrent, short circuit and phase loss.
 Input voltage: 260V ~ 430V
 Output voltage: 400V ± 3%
 With bypass.
 One year guarantee (it is necessary to use fuses GLe in the output,
see pg.35, in order the gurantee to be valid).
SVC Electromechanical stabilizers, variac type, 1phase, 500VA ~ 10KVA
1PHASE, THEY OPERATE WITH VARIAC
INPUT: 165V~250V / OUTPUT: 230V ± 3%, 50/60HZ
POWER
(KVA)
POWER
(W)
CODE
500
0.5
350
018.10.010
SVC - 1000
1.0
700
018.10.020
SVC - 1500
1.5
1050
018.10.030
SVC - 2000
2.0
1400
018.10.040
SVC - 3000
3.0
2100
018.10.050
SVC - 5000
5.0
3500
018.10.060
SVC - 7500
7.5
5250
018.10.070
SVC - 10000
10.0
7000
018.10.080
TYPE
SVC -
Very steady
stabilization
 Stabilizers 2KVA to 10KVA have by-pass.
Variac (dimmer) 500VA ~ 10KVA
TYPE
POWER
(KVA)
OUTPUT
AMPERE
(Α)
CODE
230V
CODE
400V
TDGC 2 - 0.5
0.5
2
024.10.010
024.12.010
TDGC 2 - 1
1.0
4
024.10.020
024.12.020
TDGC 2 - 2
2.0
8
024.10.030
024.12.030
TDGC 2 - 3
3.0
12
024.10.040
024.12.040
TDGC 2 - 5
5.0
20
024.10.050
024.12.050
TDGC 2 - 9
9.0
39
-
024.12.060
10.0
40
024.10.060
024.12.070
TDGC 2 - 10
 0 - 250V AC, 50HZ
 They have by-pass
1phase
3phase
5
GERMANY
GT Straight joints for low voltage cables
Low voltage cast
resin straight joints
1KV
 All cast resin joints are waterproof (up to 200m under water).
 Storage period of cast resin: 24 months.
CABLE
FROM - TO (mm)
CROSS-SECTION
NON ARMORED (mm 2 )
DIMENSIONS
L x H (mm)
CODE
GT - 10
7 - 16
5 x 1.5
180 x 33
038.10.050
GT - A - 0
6 - 19
5 x 2.5
160 x 36
038.10.060
GT - A - 1
6 - 25
5x6
190 x 48
038.10.070
GT - A - 2
14 - 35
4 x 16
240 x 50
038.10.080
GT - A - 3
16 - 37
4 x 25
270 x 65
038.10.090
GT - A - 4
20 - 44
4 x 50
360 x 80
038.10.100
GT - A - 5
26 - 52
4 x 95
430 x 95
038.10.110
GT - A - 6
35 - 65
4 x 150
530 x 120
038.10.120
GT - A - 7
45 - 80
4 x 240
700 x 180
038.10.130
GT - A - 8
50 - 90
4 x 300
900 x 190
038.10.140
TYPE
GT Cable jacket - repair joint, with gel technique
TYPE
CABLE DIAMETER
φ (mm)
DIMENSIONS
L x H x D (mm)
CODE
GTQR - 16
7 - 16 mm
121 x 46 x 35
038.15.100
GT Straight-through and branch joints, with gel technique
TYPE
NON-ARMORED CABLE DIAMETER
MAIN / BRANCH CABLE
FROM (mm2) - TO (mm2 )
DIMENSIONS
LxH
(mm)
CODE
GTQ - 6
5 x 1.5 - 5 x 6
155 x 60
038.15.010
GTQ - 16
5 x 6 - 5 x 16
200 x 75
038.15.020
 Ready for use in ground or water up to 1m and in the open air.
 The cables can be removed very easily and they can slide again in the gel-filled joint.
 The cable connector block is included.
GT Straight and branch joints up to 1kV
TYPE
6
MAIN / BRANCH CABLE
FROM (mm2) - TO (mm2)
DIMENSIONS
LxH
(mm)
CODE
GAV - A - 2
4 x 1.5 - 10
/ 4 x 1.5 - 10
220 x 58
038.22.010
GAV - A - 3
4 x 16 - 25
/
4 x 6 - 16
300 x 75
038.22.020
GAV - A - 4
4 x 16 - 70
/
4 x 6 - 35
400 x 95
038.22.030
GAV - A - 5
4 x 70 - 150
/
4 x 16 - 50
500 x 112
038.22.040
GAV - A - 6
4 x 120 - 150 /
4 x 25 - 70
610 x 125
038.22.050
GAV - A - 7
4 x 70 - 185
500 x 145
038.22.060
GT T-Branch Joint
 In case that the electric board or the connection point is across the branch
TYPE
MAIN / BRANCH CABLE
DIMENSIONS
L x H x D (mm)
CODE
ΤΜ - 1
5 x 1.5 - 5 x 10
240 x 140 x 52
038.20.010
ΤΜ - 2
5 x 6 - 5 x 16
270 x 164 x 77
038.20.020
GT Heat shrinking straight-through joints with adhesive
NUMBER OF CORES,
CROSS-SECTION
TYPE
NUMBER OF HEAT SHRINKING
JOINTS INCLUDED IN EVERY
PACKAGE
CODE
 Waterproof up to 10m.
SM5 1.5 - 6
5 x 1.5 - 6
5 inside+ 1 outside
038.60.010
SM5 1.5 - 16
5 x 1.5 - 16
5 inside + 1 outside
038.60.020
SM5 16 - 25
5 x 16 - 25
038.60.030
SM4 6 - 25
4 x 6 - 25
038.60.040
SM4 16 - 50
4 x 16 - 50
038.60.050
SM4 25 - 95
4 x 25 - 95
038.60.060
SM4 35 - 150
4 x 35 - 150
038.60.070
SM4 70 - 150
4 x 70 - 150
038.60.080
SM4 95 - 300
4 x 95 - 300
038.60.090
SM5
GT Heavy duty repair sleeves for sealing and cable repair
 With adhesive
 The metal guide can be removed after finishing the installation
 Internal pressure max. 0.15 Mpa.
 Wall thickness after shrinking: 2.3 mm.
RECOMMENDED APPLICATION RANGE
MIN. (mm) - MAX. (mm)
CODE
46 - 10
038.65.010
RM 70 - 22 / 500 mm
70 - 22
038.65.020
RM 100 - 30 / 750 mm
100 - 30
038.65.030
RM 150 - 40 / 1000 mm
150 - 40
038.65.040
TYPE
RM 46 - 10 / 250 mm
 For different dimensions:
Upon request
GT Two components cast resin
 Storage temperature: +10οC to +35οC
 Hardening and polymerization under water influence
 Permanent temperature resistance: up to +140οC (IEC216)
 Timing:
α. Mixing time: 3 min
β. Congelation time: 15 min
γ. Hardening time: 2 hours
δ. Storage time: 24 months
TYPE
WEIGHT
CODE
GAM 100
100 ml / 165 gr
038.25.010
GAM 170
170 ml / 255 gr
038.25.020
GAM 360
360 ml / 520 gr
038.25.030
GAM 470
470 ml / 685 gr
038.25.040
GAM 800
800 ml / 1320 gr
038.25.050
GAM 1800
1800 ml / 2970 gr
038.25.060
GAM 2000
2000 ml / 3300 gr
038.25.070
 GKM: Also we can provide (upon request), cast resins with gel
technique, of the newest generation,suitable for telephone cables,
which can be removed very easily and they can slide again in gel.
- Temperature: up to 30οC
- Soft elastic
- Up to 1KV
- Standards: DIN VDE 0278 - 623 S1.
7
GT Heat shrinking indoor / outdoor terminations, 24KV
INDOOR TERMINATIONS (single shed)
TYPE
NUMBER OF CORES,
CROSS-SECTION
CODE
SIEV 20/1
25 - 95
1 x 25 - 95
038.67.020
SIEV 20/1
70 - 240
1 x 70 - 240
038.67.030
SIEV 20/1 120 - 400
1 x 120 - 400
038.67.040
OUTDOOR TERMINATIONS (three sheds)
TYPE
NUMBER OF CORES,
CROSS-SECTION
CODE
SVEF 20/1
25 - 95
1 x 25 - 95
038.68.020
SVEF 20/1
70 - 240
1 x 70 - 240
038.68.030
SVEF 20/1 120 - 400
1 x 120 - 400
038.68.040
SIEV
SVEF
GT Heat shrinking straight-through joints, medium voltage, 24KV
NUMBER OF CORES,
CROSS-SECTION
CODE
SM 20/1 50 - 120
1 x 50 - 120
038.62.020
SM 20/1 95 - 300
1 x 95 - 300
038.62.030
SM 20/1 300 - 500
1 x 300 - 500
038.62.040
TYPE
GT End cap joint with gel technique (reusable)
 Reusable cable end cap with GEL technique for cable diameters 40-54 mm
 Suitable for low voltage cables 4x120-185 mm2 and for medium voltage cables
1x300-400mm 2.
TYPE
GTQE 120 - 150
NUMBER OF CORES,
CROSS-SECTION
CODE
5 pieces
4 x 120 - 185
038.72.010
GTQE
GT Tapes
TYPE
8
DESCRIPTION
DIMENSIONS
mm x mm x m
CODE
Νο 40
High voltage self-welding tape
69KV (GT23)
0.8 x 19 x 9
038.75.010
Νο 40
High voltage self-welding tape,
economic type
0.8 x 19 x 9
040.25.010
Νο 35
Cable insulation compound
3 x 38 x 1.5
038.75.020
Νο 60
Copper braid tape
Made of braided copper wires
1 x 60 x 7
038.75.030
Νο 62
Copper braid tape
Flat-milled tinned.
25 mm2
038.75.040
Νο 70
Glass fabric reinforced tape
Heat resistant, self-adhesive
0.18 x 19 x 20
038.75.050
No 35
No 62
No 40
No 60
No 70
GT Thin-walled shrinkable tubes, coated with melting adhesive
TUBE THICKNESS
AFTER SHRINKING
(mm)
CODE
6-2
1.0
038.50.010
SUM 9 - 3
9-3
1.4
038.50.020
SUM 12 - 4
12 - 4
1.8
038.50.030
SUM 19 - 6
19 - 6
2.3
038.50.040
SUM 24 - 8
24 - 8
2.5
038.50.050
SUM 40 - 13
40 - 13
2.5
038.50.060
TYPE
RECOMMENDED
CABLE DIAMETER
FROM (mm) - TO (mm)
SUM 6 - 2
 Flexible
 Packaging: 10 pieces of 1 meter
 Shrink ratio: 3:1
 Temperature: -55οC to +110οC
 Colour: Black. For other colours: upon request
GT Medium-walled shrinkable tubes, with adhesive
TYPE
RECOMMENDED
CABLE DIAMETER
FROM (mm) - TO (mm)
TUBE THICKNESS
AFTER SHRINKING
(mm)
CODE
SK3 12 - 3/1000
12 - 3
2.5
038.55.010
SK3 20 - 6/1000
20 - 6
2.5
038.55.020
SK3 28 - 6/1000
28 - 6
2.5
038.55.030
SK3 31 - 8/1000
31 - 8
2.5
038.55.040
SK3 38 - 10/1000
38 - 10
2.5
038.55.050
SK3 48 - 15/1000
48 - 15
2.5
038.55.060
SK3 75 - 23/1000
75 - 23
2.5
038.55.070
SK3 90 - 29/1000
90 - 29
2.5
038.55.080
SK3 120-36/1000
120 - 36
3.5
038.55.090
 Inflexible, heavy duty
 Packaging: 10 pieces of 1 meter
 Colour: Black. For other colours: upon request
GT Thin-walled shrinkable tubes, in box
TYPE
RECOMMENDED
CABLE DIAMETER
FROM (mm) - TO (mm)
TUBE THICKNESS
AFTER SHRINKING
(mm)
PACKAGE
(m)
CODE
PACKAGE
BLACK
SSB 1.2 - 0.6
1.2 - 0.6
0.45
15
038.45.010
SSB 1.6 - 0.8
1.6 - 0.8
0.45
15
038.45.020
SSB 2.4 - 1.2
2.4 - 1.2
0.50
15
038.45.030
SSB 3.2 - 1.6
3.2 - 1.6
0.50
15
038.45.040
SSB 4.8 - 2.4
4.8 - 2.4
0.50
10
038.45.050
SSB 6.4 - 3.2
6.4 - 3.2
0.65
10
038.45.060
SSB 9.5 - 4.8
9.5 - 4.8
0.65
10
038.45.070
SSB 12.7 - 6.4
12.7 - 6.4
0.65
8
038.45.080
SSB 19.0 - 9.5
19.0 - 9.5
0.75
7
038.45.090
SSB 25.4-12.7
25.4 - 12.7
0.90
4
038.45.100
 Colour: Black
 For 2-coloured (yellow-green) or other
colours: upon request
 Attention: Orders should be made in
packages and not in meters.
GT Shrinkable tubes, in spool
TYPE
RECOMMENDED
CABLE DIAMETER
FROM (mm) - TO (mm)
SHRINKING
DIAMETER
BEFORE - AFTER (mm)
SPOOL
LENGTH
m/spool
CODE
BLACK
S1
4.8 - 2.4
3.6 - 2.6
4.8 - 2.4
200
038.30.010
S1
6.4 - 3.2
5.7 - 3.3
6.4 - 3.2
150
038.30.020
S1
9.5 - 4.8
8.5 - 4.9
9.5 - 4.8
150
038.30.030
S1 12.7 - 6.4
11.4 - 6.5
12.7 - 6.4
100
038.30.040
S1 19.0 - 9.5
18.0 - 9.6
19.0 - 9.5
50
038.30.050
S1 25.4 - 12.7
23.0 - 14.0
25.4 - 12.7
50
038.30.060
S1 38.0 - 19.0
35.0 - 20.0
38.0 - 19.0
25
038.30.070
S1 51.0 - 26.0
47.0 - 27.0
51.0 - 26.0
25
038.30.080
S1 76.0 - 38.0
72.0 - 39.0
76.0 - 38.0
25
038.30.090
S1 102.0 - 51.0
98.0 - 52.0
102.0 - 51.0
15
038.30.100
 Flexible, thin walled
 Colour: Black
For other colours: upon request
9
GT Single core telephone cable connectors
 They connect and insulate the telephone cables with gel. No need of crimping
tools.
 Suitable for copper and aluminum connections
 Package: 500 pieces
EAV 8B
EAV 8B
MAXIMUM CABLE DIAMETER
(mm)
AWG
DIMENSIONS
L x W x H (mm)
CODE
Connector for 2 telephone cables
2.06
26 - 19
14.9 x 9.8 x 6.4
038.70.010
Branch type connector for 3
telephone cables
2.06
26 - 19
16.3 x 12.7 x 6.4
038.70.020
TYPE
EAV 8A/1
EAV 8A1
DESCRIPTION
GT Heat shrinking compression connectors with adhesive
ΤΥΠΟΣ
CABLE DIAMETER
mm2
ZISV 1
0.5 - 1.0
Red
038.85.010
ZISV 2
1.5 - 2.5
Blue
038.85.020
ZISV 3
4.0 - 6.0
Yellow
038.85.030
COLOUR
CODE
 They connect and seal the cable connections.
GT Heat shrinking tool and Hot air pistol
TYPE
ΗΡ
SWS - 1
DESCRIPTION
CODE
Hot air pistol
038.80.060
Heat shrinking tool - SET (*)
Packaging: wooden suitcase
038.80.010
ACCESSORIES
TYPE
DESCRIPTION
CODE
Νο 444
Gas cartridge for ΗΡ pistol
038.80.061
SW 3
Ignition handle
038.80.040
SW 13
Air blower
038.80.020
SW 22
Shrinking burner
038.80.030
SW 5
Flexible sleeve tube 4 m
038.80.050
(*) SET INCLUDES:
1. Empty gas cartridge
2. Tnasfusion valve
3. Hook
4. Pressure regulator
5. Ignition handle
6. Two keys 17 - 19
7. Heat shrinking tool with injector Φ10
8. Heat shrinking tool Φ36
9. Hot air injector
10. Wooden suitcase
No 444
HP
SW13
SW22
SW2
SW5
SW3
SET SWS 1
Heat shrinking tool, economic type
TYPE
TURBO TOARCH
MAPP GAS
10
DESCRIPTION
CODE
Heat shrinking tool - SET
in blister
040.15.010
Gas cartridge
040.15.020
Economic
type
Thin-walled shrinkable tubes, economic type
Economic
type
TYPE
DIAMETER
BEFORE
AND AFTER
SHRINKING
TUBE
THICKNESS
AFTER
SHRINKING
PACK.
m/roller
CODE
BLACK
CODE
BROWN
CODE
GREY
CODE
BLUE
CODE
YELLOW
CODE
RED
DRS 4
4.0 - 2.0
0.45 ± 0.1
100 m
040.10.010
040.10.020
040.10.030
040.10.040
040.10.050
040.10.060
DRS 5
5.0 - 2.5
0.55 ± 0.1
100 m
040.10.070
040.10.080
040.10.090
040.10.100
040.10.110
040.10.120
DRS 7
7.0 - 3.5
0.55 ± 0.1
100 m
040.10.130
040.10.140
040.10.150
040.10.160
040.10.170
040.10.180
DRS 10
10.0 - 5.0
0.60 ± 0.1
100 m
040.10.190
040.10.200
040.10.210
040.10.220
040.10.230
040.10.240
DRS 13
13.0 - 6.5
0.70 ± 0.1
100 m
040.10.250
040.10.260
040.10.270
040.10.280
040.10.290
040.10.300
DRS 25
25.0 - 12.5
0.90 ± 0.1
50 m
040.10.310
040.10.320
040.10.330
040.10.340
040.10.350
040.10.360
DRS 40
40.0 - 20.0
1.00 ± 0.2
25 m
040.10.370
040.10.380
040.10.390
040.10.400
040.10.410
040.10.420
DRS 50
50.0 - 25.0
1.00 ± 0.2
25 m
040.10.430
040.10.440
040.10.450
040.10.460
040.10.470
040.10.480
DRS 80
80.0 - 40.0
1.20 ± 0.2
25 m
040.10.490
040.10.500
040.10.510
040.10.520
040.10.530
040.10.540
DRS100
100.0 - 50.0
1.30 ± 0.2
25 m
040.10.550
040.10.560
040.10.570
040.10.580
040.10.590
040.10.600
Shrinkable sleeves for copper bars insulation
 Suitable for copper bars insulation and colour indication of R.S.T.
phases, according to EEC standards.
 Shrinking should be made only through hot air
 Packaging: rollers of 100m.
TYPE
WIDTH
mm
SHRINK
RATIO
CODE
BLACK
CODE
BROWN
CODE
GREY
CODE
BLUE
CODE
YELLOW
CODE
RED
CODE
WHITE
HS - 6.5
6.5
6.5 - 3.6
040.20.010
040.20.020
040.20.030
040.20.040
040.20.050
040.20.060
040.20.070
HS - 8.5
8.5
8.5 - 4.5
040.20.080
040.20.090
040.20.100
040.20.110
040.20.120
040.20.130
040.20.140
HS - 12
12.0
12.0 - 6.5
040.20.150
040.20.160
040.20.170
040.20.180
040.20.190
040.20.200
040.20.210
HS - 15
15.0
16.0 - 8.5
040.20.220
040.20.230
040.20.240
040.20.250
040.20.260
040.20.270
040.20.280
HS - 20
20.0
21.0 - 11.0
040.20.290
040.20.300
040.20.310
040.20.320
040.20.330
040.20.340
040.20.350
HS - 30
30.0
30.0 - 16.0
040.20.360
040.20.370
040.20.380
040.20.390
040.20.400
040.20.410
040.20.420
HS - 40
40.0
40.0 - 22.0
040.20.430
040.20.440
040.20.450
040.20.460
040.20.470
040.20.480
040.20.490
HS - 60
60.0
60.0 - 33.0
040.20.500
040.20.510
040.20.520
040.20.530
040.20.540
040.20.550
040.20.560
HS - 80
80.0
80.0 - 42.0
040.20.570
040.20.580
040.20.590
040.20.600
040.20.610
040.20.620
040.20.630
HS - 100
100.0
100.0 - 55.0
040.20.640
040.20.650
040.20.660
040.20.670
040.20.680
040.20.690
040.20.700
HS - 170
170.0
170.0 - 94.0
040.20.710
040.20.720
040.20.730
040.20.740
040.20.750
040.20.760
040.20.770
11
MCB Miniature circuit breakers C type, 6KA HYUNDAI
 Hyundai miniature series are the perfect solution
to protect electric overload, short circuit and
earth leakage in the household and commercial
installations.
 They provide various selection, easy installation,
economic benefit and high reliability based on
international standard IEC.
 Characteristic I/In: 5 - 10 In (C)
 Rated voltage: 240 / 415V AC (in case of 1P, MCB will be
applicable to 240V AC)
 Standards: IEC 60898, EN 60898, BV
3P
1P + N (1 element)
CODE
RATED
CURRENT
(Α)
1Ρ
2Ρ
3Ρ
1Ρ+Ν
(35 mm)
1Ρ+Ν
(17.5 mm)
3Ρ+Ν
HiBD 63
1
055.21.010
-
-
-
-
-
HiBD 63
2
055.21.020
-
-
-
-
-
HiBD 63
3
055.21.030
-
-
-
-
-
HiBD 63
4
055.21.040
-
-
-
-
-
HiBD 63
6
055.21.050
-
-
055.26.010
055.28.010
055.30.010
HiBD 63
10
055.21.060
-
055.23.010
055.26.020
055.28.020
055.30.020
HiBD 63
16
055.21.070
055.22.010
055.23.020
055.26.030
055.28.030
055.30.030
HiBD 63
20
055.21.080
055.22.020
055.23.030
055.26.040
055.28.040
055.30.040
HiBD 63
25
055.21.090
055.22.030
055.23.040
055.26.050
055.28.050
055.30.050
HiBD 63
32
055.21.100
055.22.040
055.23.050
055.26.060
055.28.060
055.30.060
HiBD 63
40
055.21.110
055.22.050
055.23.060
055.26.070
055.28.070
055.30.070
HiBD 63
50
055.21.120
055.22.060
055.23.070
055.26.080
055.28.080
055.30.080
HiBD 63
63
055.21.130
055.22.070
055.23.080
055.26.090
055.28.090
055.30.090
HiBD 125
80 (10ΚΑ)
055.21.140
055.22.080
055.23.090
055.26.100
-
055.30.100
HiBD 125
100 (10ΚΑ)
055.21.150
055.22.090
055.23.100
055.26.110
-
055.30.110
HiBD 125
125 (10ΚΑ)
055.21.160
055.22.100
055.23.110
055.26.120
-
055.30.120
12 pcs
6 pcs
4 pcs
6 pcs
12 pcs
3 pcs
TYPE
Package:
RCBO Residual current circuit breaker with overcurrent protection HYUNDAI
1Ρ+Ν
(Package: 6 pcs)
TYPE
RATED
CURRENT
(Α)
OPERATING
CURRENT
(mΑ)
RATED
VOLTAGE
(V AC)
CODE
HiRΟ 40
10
30
240
055.40.010
HiRΟ 40
16
30
240
055.40.020
HiRΟ 40
32
30
240
055.40.030
HiRΟ 40
40
30
240
055.40.040
HiRΟ 40
32
300
240
055.40.050
HiRΟ 40
40
300
240
055.40.060
 Standards: IEC 61009, EN 61009
12
1Ρ+N
RCCB Residual current circuit breaker HYUNDAI
2Ρ
(Package: 6 pcs)
TYPE
RATED
CURRENT
(Α)
OPERATING
CURRENT
(mΑ)
RATED
VOLTAGE
(V AC)
CODE
HiRC 63
40
30
240
055.45.050
HiRC 63
63
30
240
055.45.060
HiRC 63
40
300
240
055.45.070
HiRC 63
63
300
240
055.45.080
2Ρ
4Ρ
(Package: 3 pcs)
TYPE
RATED
CURRENT
(Α)
OPERATING
CURRENT
(mΑ)
RATED
VOLTAGE
(V AC)
CODE
HiRC 63
40
30
415
055.50.050
HiRC 63
63
30
415
055.50.060
HiRC 63
40
300
415
055.50.070
HiRC 63
63
300
415
055.50.080
4Ρ
 Standards: IEC 61009, EN 61009
MSD Miniature switch disconnector HYUNDAI
1Ρ
(Package: 12 pcs)
TYPE
AMPERE
(Α)
VOLT
(V AC)
CODE
HiSD 125
32
240 / 415
055.35.010
HiSD 125
63
240 / 415
055.35.020
2Ρ
(Package: 6 pcs)
TYPE
AMPERE
(Α)
VOLT
(V AC)
CODE
HiSD 125
32
240 / 415
055.35.030
HiSD 125
63
240 / 415
055.35.040
1Ρ
2Ρ
3Ρ
(Package: 4 pcs)
TYPE
AMPERE
(Α)
VOLT
(V AC)
CODE
HiSD 125
32
240 / 415
055.35.050
HiSD 125
63
240 / 415
055.35.060
HiSD 125
100
240 / 415
055.35.070
HiSD 125
125
240 / 415
055.35.080
3Ρ
 Standards: IEC 60947, EN 60947-3
13
Manual motor starter HYUNDAI
TYPE
SETTING
RANGE (A)
3 PHASE KW
400V (KW)
MMS32K 0P63
0.4 - 0.63
0.12
049.10.010
MMS32K 1P00
0.63 - 1.0
0.25
049.10.020
MMS32K 01P6
1.0 - 1.6
0.37
049.10.030
MMS32K 02P5
1.6 - 2.5
0.75
049.10.040
MMS32K 0004
2.5 - 4.0
1.5
049.10.050
MMS32K 06P3
4.0 - 6.3
2.2
049.10.060
MMS32K 0010
6 - 10
4.0
049.10.070
MMS32K 0014
9 - 14
5.5
049.10.080
MMS32K 0018
13 - 18
7.5
049.10.090
MMS32K 0023
17 - 23
11.0
049.10.100
MMS32K 0025
20 - 25
11.0
049.10.110
MMS32K 0032
24 - 32
15.0
049.10.120
MMS80K 0040
25 - 40
20.0
049.12.010
MMS80K 0063
40 - 63
30.0
049.12.020
MMS80K 0080
56 - 80
35.0
049.12.030
CODE
MMS
 Standards: IEC 60947-2, IEC 60947-4-1
Accessories of manual motor starters HYUNDAI
AUX
AXT
AUX
MMS
TYPE
14
DESCRIPTION
SHT
UVT
CONTACTS
MOUNTING
CODE
MMS32K AUX T11
Auxiliary switch
1NO + 1NC
Top side
051.10.010
MMS32K AUX S11
Auxiliary switch
1NO + 1NC
Left side
051.10.020
MMS32K AUX S20
Auxiliary switch
2NO
Left side
051.10.030
MMS80K AUX S11
Auxiliary switch
1NO + 1NC
Left side
051.10.040
MMS80K AUX S20
Auxiliary switch
2NO
Left side
051.10.050
MMS32K AXT 1010
Alarm switch
1NO (alarm) + 1ΝΟ (aux.)
Left side
051.12.010
MMS32K AXT 1001
Alarm switch
1NO (alarm) + 1ΝC (aux.)
Left side
051.12.020
MMS32K AXT 0110
Alarm switch
1NC (alarm) + 1ΝΟ (aux.)
Left side
051.12.030
MMS32K AXT 0101
Alarm switch
1NC (alarm) + 1ΝC (aux.)
Left side
051.12.040
MMS32K SHT 240
Shunt trip
AC 220 / 240V
Right side
051.14.010
MMS32K UVT 240
Under voltage trip
AC 220 / 240V
Right side
051.16.010
Molded case circuit breakers HYUNDAI
BREAKING
CURRENT Icu
(KA)
TYPE
RANGE
(0.63/0.8-1.0) x In
(Α)
CODE
HiBS 103J - K3A00Y - 16A
25
12.5 - 16
058.10.010
HiBS 103J - K3A00Y - 20A
25
16 - 20
058.10.020
HiBS 103J - K3A00Y - 25A
25
20 - 25
058.10.030
HiBS 103J - K3A00Y - 32A
25
25 - 32
058.10.040
HiBS 103J - K3A00Y - 40A
25
32 - 40
058.10.050
HiBS 103J - K3A00Y - 50A
25
40 - 50
058.10.060
HiBS 103J - K3A00Y - 63A
25
50 - 63
058.10.070
HiBS 103J - K3A00Y - 80A
25
64 - 80
058.10.080
HiBS 103J - K3A00Y - 100A
25
80 - 100
058.10.090
HiBS 203J - K3A00Y - 125A
25
100 - 125
058.12.010
HiBS 203J - K3A00Y - 160A
25
128 - 160
058.12.020
HiBS 203J - K3A00Y - 200A
25
160 - 200
058.12.030
HiBS 203J - K3A00Y - 250A
25
200 - 250
058.12.040
HiBS 403NE - K3A00YS - 400A
50
252 - 400
058.14.010
HiBS 603NE - K3A00YS - 600A
65
378 - 600
058.16.010
HiBS 803NE - K3B00YS - 800A
65
504 - 800
058.16.020
HiBS 1003NE - K3B00YS - 1000A
100
630 - 1000
058.18.010
HiBS 1203NE - K3B00YS - 1200A
100
756 - 1200
058.18.020
65
640 - 1600
058.20.010
UCB 1600S - 3PESB0000C - 1600A
Non adjustable
Fixed-magnetic trip
unit
 There are also avaliable upon request MCCBs with terminal screw or terminal bus bar connection.
 For MCCBs with different breaking capacity: upon request
HiBS 103J
UCB 1600S
Accessories of molded case circuit breakers HYUNDAI
TYPE
DESCRIPTION
CODE
UVT - AC
Undervoltage trip - AC
060.10.010
UVT - DC
Undervoltage trip - DC
060.12.010
SHT
Shunt trip
060.14.010
AUX
Auxiliary switch
060.16.010
ALT
Alarm trip switch
060.18.010
TFG
Operating handle (3, 4 pole), breaker mounted Off/On/Trip
060.20.010
TFH
For TFG. Operating handle, panel mounted
060.20.020
TCF
Terminal cover
060.20.030
TDM
Plug - in mounting base
060.20.040
TQQ
Interpole barier
060.20.050
MCCB Motor operator HYUNDAI
TYPE
APPLIED MCCB
CODE
MOT - 20C
HiBS 203J, HiBS 225
060.30.010
MOT - 46NE
HiBS 400NE, HiBS 600NE
060.30.020
MOT - 80NE
HiBS 800NE, HiBS 1000NE,
HiBS 1200NE
060.30.030
Front
mounting
15
Contactors HYUNDAI
 For heavy industrial applications
 Favored by shipyards and power plants
 Noise free using new high technology materials
 Fast and easy coil replacement
 ΙΡ20 protection
 Made in Korea, by ΗYUNDAI heavy industries
 Standards: IEC60947, UL508, CE, Lloyd’s register
HiMC
TYPE
RATING
(KW)
AC3
HiMC
9
4
HiMC
12
HiMC
18
HiMC
AMPERE
(Α)
AC3
AMPERE
(Α)
AC1
230V AC
400V AC
440V AC
110V AC
48V AC
24V AC
9
20
1+1
044.10.010
044.12.010
044.14.010
044.16.010
044.18.010
044.20.010
5.5
12
20
1+1
044.10.020
044.12.020
044.14.020
044.16.020
044.18.020
044.20.020
7.5
18
25
1+1
044.10.030
044.12.030
044.14.030
044.16.030
044.18.030
044.20.030
HiMC
22
11
22
32
1+1
044.10.040
044.12.040
044.14.040
044.16.040
044.18.040
044.20.040
HiMC
32
15
32
50
2+2
044.10.050
044.12.050
044.14.050
044.16.050
044.18.050
044.20.050
HiMC
40
18.5
40
50
2+2
044.10.060
044.12.060
044.14.060
044.16.060
044.18.060
044.20.060
HiMC
50
22
50
70
2+2
044.10.070
044.12.070
044.14.070
044.16.070
044.18.070
044.20.070
HiMC
65
30
65
100
2+2
044.10.080
044.12.080
044.14.080
044.16.080
044.18.080
044.20.080
HiMC
80
37
80
110
2+2
044.10.090
044.12.090
044.14.090
044.16.090
044.18.090
044.20.090
HiMC
90
45
90
135
2+2
044.10.100
044.12.100
044.14.100
044.16.100
044.18.100
044.20.100
HiMC
110
55
110
150
2+2
044.10.110
044.12.110
044.14.110
044.16.110
044.18.110
044.20.110
HiMC
130
65
130
160
2+2
044.10.120
044.12.120
044.14.120
044.16.120
044.18.120
044.20.120
HiMC
150
75
150
200
2+2
044.10.130
044.12.130
044.14.130
044.16.130
044.18.130
044.20.130
HiMC
180
90
180
230
2+2
044.10.140
044.12.140
044.14.140
044.16.140
044.18.140
044.20.140
HiMC
220
110
220
260
2+2
044.10.150
044.12.150
044.14.150
044.16.150
044.18.150
044.20.150
HiMC
260
132
260
300
2+2
044.10.160
044.12.160
044.14.160
044.16.160
044.18.160
044.20.160
HiMC
300
160
300
350
2+2
044.10.170
044.12.170
044.14.170
044.16.170
044.18.170
044.20.170
HiMC
400
220
400
450
2+2
044.10.180
044.12.180
044.14.180
044.16.180
044.18.180
044.20.180
HiMC
500
250
500
550
2+2
044.10.190
044.12.190
044.14.190
044.16.190
044.18.190
044.20.190
HiMC
630
330
630
750
2+2
044.10.200
044.12.200
044.14.200
044.16.200
044.18.200
044.20.200
HiMC
800
440
800
900
2+2
044.10.210
044.12.210
044.14.210
044.16.210
044.18.210
044.20.210
 Also avaliable: 24V DC and 48V DC
16
CODE
AUX.
CONTACT
ΝΟ / ΝC
Thermal overload relays HYUNDAI
TYPE
SUITABLE FOR CONTACTORS
SETTING
RANGE (Α)
CODE
HiTH 22K 0.18
HiMC9 - HiMC22 (4 - 11KW)
0.12 - 0.18
044.45.010
HiTH 22K 0.26
0.18 - 0.26
044.45.020
HiTH 22K 0.35
0.25 - 0.35
044.45.030
HiTH 22K 0.5
0.34 - 0.50
044.45.040
HiTH 22K 0.7
0.50 - 0.70
044.45.050
HiTH 22K 0.9
0.60 - 0.90
044.45.060
HiTH 22K 1.2
0.80 - 1.20
044.45.070
HiTH 22K 1.6
1.10 - 1.60
044.45.080
HiTH 22K 2.1
1.50 - 2.10
044.45.090
HiTH 22K 3.0
2.00 - 3.00
044.45.100
HiTH 22K 4.2
2.80 - 4.20
044.45.110
HiTH 22K 5.0
3.00 - 5.00
044.45.120
HiTH 22K 6.0
4.00 - 6.00
044.45.130
HiTH 22K 8.0
5.60 - 8.00
044.45.140
HiTH 22K 10
7 - 10
044.45.150
HiTH 22K 13
9 - 13
044.45.160
HiTH 22K 18
12 - 18
044.45.170
HiTH 22K 22
16 - 22
044.45.180
HiTH 40K 10
HiMC32 - HiMC40 (15 - 18.5KW)
7 - 10
044.47.010
HiTH 40K 13
HiMC32 - HiMC40 (15 - 18.5KW)
9 - 13
044.47.020
HiTH 40K 18
HiMC32 - HiMC40 (15 - 18.5KW)
12 - 18
044.47.030
HiTH 40K 22
HiMC32 - HiMC40 (15 - 18.5KW)
16 - 22
044.47.040
HiTH 40K 26
HiMC32 - HiMC40 (15 - 18.5KW)
18 - 26
044.47.050
HiTH 40K 32
HiMC32 - HiMC40 (15 - 18.5KW)
24 - 32
044.47.060
HiTH 40K 40
HiMC32 - HiMC40 (15 - 18.5KW)
28 - 40
044.47.070
HiTH 50K 26
HiMC50 (22KW)
18 - 26
044.49.010
HiTH 50K 32
HiMC50 (22KW)
24 - 32
044.49.020
HiTH 50K 40
HiMC50 (22KW)
28 - 40
044.49.030
HiTH 50K 50
HiMC50 (22KW)
36 - 50
044.49.040
HiTH 90K 40
HiMC65 - HiMC90 (30 - 45KW)
28 - 40
044.51.010
HiTH 90K 50
HiMC65 - HiMC90 (30 - 45KW)
36 - 50
044.51.020
HiTH 90K 65
HiMC65 - HiMC90 (30 - 45KW)
45 - 65
044.51.030
HiTH 90K 80
HiMC65 - HiMC90 (30 - 45KW)
60 - 80
044.51.040
HiTH 90K 90
HiMC65 - HiMC90 (30 - 45KW)
70 - 90
044.51.050
HiTH 130K 80 *
HiMC110 - HiMC130 (55 - 65KW)
48 - 80
044.52.010
HiTH 130K 130 *
HiMC110 - HiMC130 (55 - 65KW)
78 - 130
044.52.020
HiTH 220K 130 *
HiMC150 - HiMC220 (75 - 110KW)
78 - 130
044.54.010
HiTH 220K 180 *
HiMC150 - HiMC220 (75 - 110KW)
108 - 180
044.54.020
HiTH 220K 220 *
HiMC150 - HiMC220 (75 - 110KW)
132 - 220
044.54.030
HiTH 300K 220 *
HiMC260 - HiMC300 (132 - 160KW)
132 - 220
044.56.010
HiTH 300K 300 *
HiMC260 - HiMC300 (132 - 160KW)
180 - 300
044.56.020
HiTH
HiTH
( * ) With in-built current transformer
17
Capacitor switch contactors HYUNDAI
TYPE
DESCRIPTION
AUXILIARY
CONTACTS
CODE
HiMK 9W 21
Contactors for capacitors 9.7 kVAR 415V
2NO + 1NC
044.32.010
HiMK 18W 21
2NO + 1NC
044.32.020
HiMK 32W 32
3NO + 2NC
044.32.030
HiMK 50W 32
3NO + 2NC
044.32.040
HiMK
Control relays HYUNDAI
TYPE
OPERATIONAL
CURRENT Ie
230V (AC15)
OPERATIONAL
CURRENT Ie
440V (AC12)
AUXILIARY
CONTACTS
CODE
230V AC
HMX 22
8Α
6Α
2NO + 2NC
044.30.010
ΗΜΧ 31
8Α
6Α
3NO + 1NC
044.30.020
ΗΜΧ 40
8Α
6Α
4NO + 0NC
044.30.030
 For different voltages upon request.
HMX
Degital motor protection relay with in-built phase controller and digital
ampere meter for motors and pumps. With seperable display part,
deluxe type HYUNDAI
 Motor protection:
 It contains:
 Operating voltage:
DELUXE TYPE
- Over-current / Under-current (preventing the vain
rotation from power fault)
- Phase failure / Phase unbalance / Reverse phase
- Stall / Lock
- Short circuit
- 3phase digital ampere meter
- Seperable display LCD
- Display for the cause of fault
- Operating time alert
- Preliminary alert
- Automatic reset can be selected
- Type 065SI can be used for motors >60Α through
current transformer /5Α.
- 230V: 80-110%
TYPE
SETTING (Α)
CABLE CONNECTION
CODE
HiMPD 60T
5 - 60A
Tunnel
044.64.010
HiMPD 06SI
0.5 - 6A
Screw
044.64.020
TYPE
18
HiMPD
Seperable
display LCD
Connecting cable for
the display
CODE
Connecting cable for the display, 1.5 m
044.65.010
Display bracket
044.65.020
Display bracket
Digital motor protection relay with in-built phase
controller for motor protection, standard type HYUNDAI
Over-current, Phase failure, Reverse phase,
Phase unbalance
Test button
Manual or electrical reset
1 NO / 1 NC
90 - 250V
 It contains:
 Auxiliary contacts:
TYPE
CURRENT RANGE
CABLE CONNECTION
CODE
HiMP22K ΤN - 01 S
0.3 - 1.5 A
Tunnel
044.62.270
HiMP22K SN - 05 S
1.0 - 5.0 A
Screw
044.62.090
HiMP22K ΤN - 05 S
1.0 - 5.0 A
Tunnel
044.62.300
HiMP22K SN - 22 S
4.4 - 22.0 A
Screw
044.62.320
HiMP22K ΤN - 22 S
4.4 - 22.0 A
Tunnel
044.62.330
HiMP40K SN - 40 S
8.0 - 40.0 A
Screw
044.62.440
HiMP40K TN - 40 S
8.0 - 40.0 A
Tunnel
044.62.450
HiMP50K SN - 50 S
10.0 - 50.0 A
Screw
044.62.560
HiMP50K TN - 50 S
10.0 - 50.0 A
Tunnel
044.62.570
HiMP 22Κ - SN - 22 S (screw)
Digital motor protection relay with wide current range and delay time
setting, economic type HYUNDAI
 It contains:
Over-current, Phase failure, Stall / Lock
Manual or electrical reset
230V: 75  120%
TYPE
CURRENT RANGE
CABLE CONNECTION
CODE
HiMP22H SS - 06 S
HiMP22H TS - 06 S
0.6 - 6 A
Screw
044.60.010
0.6 - 6 A
Tunnel
044.60.020
HiMP22H SS - 22 S
HiMP22H TS - 22 S
2.2 - 22 A
Screw
044.60.030
2.2 - 22 A
Tunnel
044.60.040
HiMP40H SS - 40 S
HiMP40H TS - 40 S
4 - 40 A
Screw
044.60.050
4 - 40 A
Tunnel
044.60.060
HiMP50H SS - 50 S
HiMP50H TS - 50 S
6 - 50 A
Screw
044.60.070
6 - 50 A
Tunnel
044.60.080
HiMP 40Η - TS - 40 S (tunnel)
ACCESSORIES
TYPE
DESCRIPTION
CODE
HiMP22K - SN
Base for din rail installation of
digital motor protection relays
044.63.010
Base for din rail installation (044.63.010)
Air circuit breaker with a wide choice of specications HYUNDAI
 Operating voltage: 690V AC
 Draw out type of mounting. (Fixed type: upon request)
 Standards: IEC60947-2, EN60947-2, Lloyd’s
TYPE
AMPERE
(Α)
POLES
(Ρ)
BREAKING CAPACITY
Icu (KA)
CODE
HiAN 12
1250
3
70
058.50.040
HiAN 16
1600
3
70
058.50.050
19
Surge absorber
 It drops surge voltage, which is 10-20 times of the rated voltage occured at the operation of the
contactor or auxiliary switch, to below 3 times of rated voltage.
 It prevents damage to electronic parts from high surge voltage.
 It is suitable for PLC control circuit and applicable to 50HZ and 60HZ.
 It is connected to the coil of contactor.
TYPE
VOLT (V)
CODE
HRC 40 / 220
HiMC 9 - 40A
110 - 230
044.40.020
HRC 40/220
(044.40.020)
Electronic timer block
 It is mounted on the front part of contactor.
 Time delay: 10 - 220 sec. (position Α) / 0.15 - 15 sec. (position Β)
TYPE
VOLT (V)
CODE
HOKZE 1
90 - 240V AC/DC
044.70.010
HOKZE1
(044.70.010)
Mechanical interlock unit HYUNDAI
 A simultaneous closing of two contactors is prevented. When one contactor is On the other is Off.
TYPE
CODE
HiTL 40
HiMC 9 - 40A
044.38.010
HiTL 50
HiMC 50A
044.38.020
HiTL 130
HiMC 65 - 130A
044.38.030
HiTL 220
HiMC 150 - 220A
044.38.040
 Also avaliable for contactors up to HiMC 800A
Auxiliary contact block HYUNDAI
SUITABLE FOR
CONTACTORS
AUX. CONTACTS
ΝΟ + ΝC
HiAL 11
HiMC 9 - 22A
1+1
Left
044.36.010
HiAB 11S
HiMC 9 - 50A
1+1
Front
044.36.020
HiAB 22
HiMC 9 - 50A
2+2
Front
044.36.030
HiAB 31
HiMC 9 - 50A
3+1
Front
044.36.040
HiAL 5S
HiMC 65 - 130A
1+1
Left
044.36.050
HiAR 6S
HiMC 65 - 130A
1+1
Right
044.36.060
HiAL 7S
HiMC 150 - 800A
1+1
Left
044.36.070
HiAR 8S
HiMC 150 - 800A
1+1
Right
044.36.080
HiAC 22S
HMX
2+2
Front
044.36.090
HiAC 31S
HMX
3+1
Front
044.36.100
HiAC 40S
HMX
4+0
Front
044.36.110
TYPE
MOUNTING
POSITION
CODE
230V AC
HiAC
Mechanical latching block HYUNDAI
 It keeps the contactor mechanically latched.
 Fast and easy mounting to contactors and control relays.
TYPE
VOLT (V)
CODE
HLB 2 / 220
230V AC / DC
044.40.010
HLB 2 / 110
110V AC / DC
044.40.015
 Also avaliable in 24, 48 and 440V AC/DC.
20
HLB 2 / 220
(044.40.010)
Frequency inverters
CHF100 Series: V/F Control
For General applications, Pumps, Fans, etc.
CHE100 Series: Sensorless Vector Control
For Special applications, Air conditioners, Extruders, Conveyors, Textile, Printing and
Dyeing, Ceramic machines, Chemical bers, etc.
- All models of inverters have in-built protection from mains overcurrent
- English manual
- For higher power or different voltages: upon request
- One year guarantee
 If the distance of the cable from the motor is longer than 50m, it is
necessary to use: 1.inverter with higher power rating and
2. AC output reactor.
POWER
RATING
(KW)
TYPE
POWER
RATING
(HP)
RATED
CURRENT
(Α)
CHF - CHE
CODE
CHF Series
General
applications
CODE
CHE Series
Special
applications
1 PHASE INPUT 230V AC / 3 PHASE OUTPUT 3 x 230V AC (Constant torque G)
CHF / CHE 100 - 0R4G - S2
0.4
0.5
2.3
-
065.15.010
CHF / CHE 100 - 0R7G - S2
0.75
1.0
4.5
-
065.15.020
CHF / CHE 100 - 1R5G - S2
1.5
2.0
7.0
065.10.010
Upon request
CHF / CHE 100 - 2R2G - S2
2.2
3.0
10.0
065.10.020
Upon request
3 PHASE INPUT / OUTPUT 400V AC (Constant torque G)
CHF / CHE 100 - 0R7G - 4
0.75
1.0
2.5
065.10.030
Upon request
CHF / CHE 100 - 1R5G - 4
1.5
2.0
3.7
065.10.040
Upon request
CHF / CHE 100 - 2R2G - 4
2.2
3.0
5.0
065.10.050
Upon request
3 PHASE INPUT / OUTPUT 400V AC (Constant torque G / Variable torque Ρ)
G/P
G/P
G/P
*
CHF / CHE 100 - 004G / 5R5P - 4
4.0 / 5.5
5.0 / 7.5
9 / 13
065.10.060
Upon request
CHF / CHE 100 - 5R5G / 7R5P - 4
5.5 / 7.5
7.5 / 10.0
13 / 17
065.10.070
Upon request
CHF / CHE 100 - 7R5G / 011P - 4
7.5 / 11.0
10 / 15
17 / 25
065.10.080
Upon request
CHF / CHE 100 - 011G / 015P - 4
11.0 / 15.0
15 / 20
25 / 32
065.10.090
065.15.110
CHF / CHE 100 - 015G / 018P - 4
15.0 / 18.5
20 / 25
32 / 37
065.10.100
065.15.120
CHF / CHE 100 - 018G / 022P - 4
18.5 / 22.0
25 / 30
37 / 45
065.10.110
065.15.130
CHF / CHE 100 - 022G / 030P - 4
22 / 30
30 / 40
45 / 60
065.10.120
065.15.140
CHF / CHE 100 - 030G / 037P - 4
30 / 37
40 / 50
60 / 75
065.10.130
Upon request
CHF / CHE 100 - 037G / 045P - 4
37 / 45
50 / 60
75 / 90
065.10.140
065.15.160
CHF / CHE 100 - 045G / 055P - 4
45 / 55
60 / 75
90 / 110
065.10.150
065.15.170
CHF / CHE 100 - 055G / 075P - 4
55 / 75
75 / 100
110 / 150
065.10.160
065.15.180
CHF / CHE 100 - 075G / 090P - 4
75 / 90
100 / 122
150 / 176
065.10.170
065.15.190
CHF / CHE 100 - 090G / 110P - 4
90 / 110
122 / 150
176 / 210
065.10.180
Upon request
* Constant torque G / Variable torque Ρ (Selection guide):
You have to choose type of inverter according to the power of motor and the application.
Inverters higher than 4 KW can operate in constant torque or in variable torque: ie.: 4 / 5.5 KW
Constant torque (the smaller power value) is used for heavier loads such as extruders, conveyors, etc. Variable torque (the higher
power value) is used for lighter loads such as fans, pumps, etc.
You can select the type of torque from the menu on the display.
21
Frequency inverters
CHV100 Series
Close Loop Vector Inverter
Constant
torque (G)
Applications: Elevators, Cranes, High accuracy machine tools,
Pumping stations, etc.
POWER
RATING
(KW)
TYPE
POWER
RATING
(HP)
RATED
CURRENT
(Α)
CODE
3 PHASE INPUT / OUTPUT 400V AC (Constant torque G)
CHV100 - 004G - 4
4.0
5.0
9.0
065.20.030
CHV100 - 5R5G - 4
5.5
7.5
13
065.20.040
CHV100 - 7R5G - 4
7.5
10
17
065.20.050
CHV100 - 011G - 4
11.0
15
25
065.20.060
CHV160 Series
For water supply applications
Able to control up to 7 pumps with circular switching
POWER
RATING
(KW)
TYPE
POWER
RATING
(HP)
RATED
CURRENT
(Α)
CODE
CHV
3 PHASE INPUT / OUTPUT 400V AC
CHV160 - 5R5 - 4
5.5
7.5
13
065.30.010
CHV160 - 7R5 - 4
7.5
10
17
065.30.020
CHV160 - 011 - 4
11.0
15
25
065.30.030
CHV160 - 015 - 4
15.0
20
32
065.30.040
CHV160 - 018 - 4
18.5
25
37
065.30.050
CHV160 - 022 - 4
22.0
30
45
065.30.060
CHV160 - 030 - 4
30.0
40
60
065.30.070
CHV160 - 037 - 4
37.0
50
75
065.30.080
CHV160 - 045 - 4
45.0
60
90
065.30.090
CHV160 - 055 - 4
55.0
75
110
065.30.100
CHV160 - 075 - 4
75.0
100
150
065.30.110
CHV160 - 090 - 4
90.0
122
176
065.30.120
DIMENSIONS / WEIGHT (CHF, CHE, CHV)
INVERTER POWER
(kW)
22
HxWxD
(mm)
WEIGHT
(Kg)
0.75 - 2.2
180 x 120 x 140
2
4 - 5.5
250 x 160 x 175
4
7.5 - 15
320 x 220 x 180
7
18.5 - 30
467 x 290 x 215
24
37 - 55
577 x 375 x 270
41
75 - 110
755 x 460 x 330
75
Four pump connection diagram
Frequency inverter accessories
Extension card I/O
Serial communication card PC
Keypad LCD
Input filter
Breaking resistors
OUTPUT REACTORS
(For motor cable longer than 50m)
BREAKING RESISTORS
INVERTER POWER
KW
TYPE
POWER
RATING
KW
RATED
CURRENT
Α
CODE
OCL-0002-EISH
0.75
2.0
068.20.010
OCL-0005-EISH
1.5
5.0
068.20.020
OCL-0007-EISH
2.2
7.5
068.20.030
OCL-0010-EISH
4.0
10
OCL-0015-EISH
5.5
CODE
0.75
068.15.010
1.5
068.15.020
2.2
068.15.030
4.0
068.15.040
5.5
068.15.050
068.20.040
7.5
068.15.060
15
068.20.050
11.0
068.15.070
15.0
068.15.080
18.5
068.15.090
OCL-0020-EISH
7.5
20
068.20.060
OCL-0030-EISH
11.0
30
068.20.070
22
068.15.100
OCL-0040-EISH
15.0
40
068.20.080
30
068.15.110
OCL-0050-EISH
18.5
50
068.20.090
37
068.15.120
OCL-0060-EISH
22
60
068.20.100
45
068.15.130
55
068.15.140
OCL-0080-EISH
30
80
068.20.110
75
068.15.150
OCL-0090-EISH
37
90
068.20.120
90
068.15.160
OCL-0120-EISH
45
120
068.20.130
OCL-0150-EISH
55
150
068.20.140
OCL-0200-EISH
75 / 90
200
068.20.150
OCL-0250-EISH
110 / 132
250
068.20.160
CARDS & KEYPADS
TYPE
DESCRIPTION
CODE
CHV100 - IO
Extension card Ι/Ο
068.25.010
CHV100 - PG
PG card
068.25.020
CHV100 - COM
Serial communication card
RS 232
068.25.030
CHV100 - WS
Water supply control card
068.25.040
CHV100 - OPΕ
Keypad LED for inverters CHV,
CHF and CHE
068.25.050
INPUT FILTERS ΕΜΙ
(For protection of mains supply
from harmonic distortion)
TYPE
INVERTER
POWER (KW)
CODE
NFI - 005
0.4 - 2.2
068.10.010
NFI - 010
4.0
068.10.020
NFI - 020
5.5 - 7.5
068.10.030
NFI - 036
11.0 - 15.0
068.10.040
NFI - 050
18.5 - 22.0
068.10.050
NFI - 065
30
068.10.060
NFI - 080
37
068.10.070
NFI - 100
45
068.10.080
NFI - 150
55 - 75
068.10.090
NFI - 200
90
068.10.100
23
Capacitors
SPAIN
FMD 4175
MFB 41250
POLB 44250SK
POLT 44062
 ATTENTION: 1. All capacitors have discharge resistors according to standarts IEC831, with discharge time 3 min in 75V, exept
type POL
2. In case of instant shutting down and restarting of the capacitor, there is discharging problem. For this reason,
it is neccessary to use fast discharge resistors 2 - 4 sec connected to the auxiliary contacts of the contactors.
 Standards: IEC60831, IEC831, IEC70/70A, BS1650, VDE560, RoHS.
 Also avaliable in 460V, upon request
 For capacitor switch contactors HYUNDAI, please see page 18
TYPE
KVAR
VOLT
V
AMPERE
Α
DEPTH
mm
WIDTH
mm
HEIGHT
mm
CODE
POLIMET
POLT 44030
2.5
400
3.6
Φ50
-
151
075.10.010
POLT 44062
5.0
400
7.5
Φ75
-
155
075.10.020
POLB 44125 SK
10.0/12.5
400/440
14.9
Φ85
-
245
075.10.030
POLB 44150 SK
12.5/15.0
400/440
17.9
Φ85
-
245
075.10.040
POLB 44182 SK
15.0/18.0
400/440
21.6
Φ110
-
245
075.10.050
POLB 44250 SK
20.0/25.0
400/440
29.8
Φ110
-
245
075.10.060
POLB 44300 SK
25.0/30.0
400/440
35.8
Φ110
-
245
075.10.070
FILMETAL (New series FMD)
MFB 41250
25
400/415
44.0
70
23
390
075.12.010
FMD 4125
25
400/415
36.1
117
28
230
075.14.010
FMD 4130
30
400/415
43.3
117
28
230
075.14.020
FMD 4140
40
400/415
57.7
117
28
270
075.14.030
FMD 4150
50
400/415
72.2
117
28
330
075.14.040
FMD 4160
60
400/415
86.6
117
28
420
075.14.050
FMD 4175
75
400/415
108.3
117
28
460
075.14.060
FMD 4180
80
400/415
115.6
117
28
460
075.14.070
FMD 4199
100
400/415
144.5
117
28
610
075.14.080
FAST DISCHARGE RESISTORS
24
TYPE
RESISTOR
FOR CAPACITORS
CODE
RD 60
2 x 1000 Ohms
30 to 60 KVAR Filmetal
075.16.010
RD 100
2 x 1000 Ohms
75 to 100 KVAR Filmetal
075.16.020
2W-V
2 x 220K
2.5 to 5 KVAR POLT Polimet
075.16.030
Automatic bank
LIFASA automatic capacitor banks are used for centralized compensation of power factor in low voltage installations. It is only
necessary to connect them to the mains with cables of adequate
cross section, and to supply the operation signal from a suitable
current transformer.
They include:

- Capacitor switch contactors
- Discharge resistors
- Low losses power capacitors
- Reactive power controllers
- Terminals for neutral and ground conductors
- Metal cabinet ΙΡ31
BATM
 For higher capacity automatic banks, upon request.
TYPE
KVAR
COMPOSITION
VOLT
(V)
PROGRAM
WEIGHT
(Kg)
CODE
ΒΑΤM0840350
35
1 x 5 +1 x 10 + 1 x 20
400
1.2.4
26
075.50.010
ΒΑΤM0840500
50
1 x 10 + 2 x 20
400
1.2.2
29
075.50.020
ΒΑΤM0840700
70
1 x 10 + 3 x 20
400
1.2.2
38
075.50.030
BATN1240100b
100
5 x 20
400
1.1.1
67
075.50.040
BATL3240140
140
1 x 20 + 1 x 40 + 1 x 80
400
1.2.4
125
075.50.050
BATL3240200
200
1 x 40 + 2 x 80
400
1.2.2
138
075.50.060
BATL3240280
280
1 x 40 + 3 x 80
400
1.2.2
150
075.50.070
BATL
SPAIN
Capacitors and reactors for harmonic protection
CAPACITOR
TYPE
REACTOR
TYPE
KVAR
FMF4612
INR 40107
10
FMF4618
INR 40157
FMF4625
AMPERE
(A)
VOLT
(V)
ΥΨΟΣ
(mm)
14.4
400/460
180
15
21.7
400/460
INA 40207
20
28.9
FMF4631
INA 40257
25
FMF4637
INA 40307
FMF4649
WEIGHT
(Kg)
CAPACITOR
CODE
REACTOR
CODE
5
075.60.010
075.63.010
230
5
075.60.020
075.63.020
400/460
230
6
075.60.030
075.63.030
36.1
400/460
270
8
075.60.040
075.63.040
30
43.3
400/460
330
8
075.60.050
075.63.050
INA 40407
40
57.7
400/460
420
11
075.60.060
075.63.060
FMF4661
INA 40507
50
72.2
400/460
460
14
075.60.070
075.63.070
FMF4674
INA 40607
60
86.6
400/460
550
15
075.60.080
075.63.080
FMF4698
INA 40807
80
115.6
400/460
650
19
075.60.090
075.63.090
FMF type capacitors with reactors ΙΝΑ/INR ensure perfect harmonic protection of mains supply, caused
by UPS, Inverters, electronic ballast, etc.
FMF
INA / INR
Energy evaluation of mains supply system
NORATEX SA, having specialized technicians and high technology equipments, can offer
saving energy solutions, correcting the power factor of mains supply by the use of the correct
capacitor and the appropriate reactors, if they are necessary.
25
Motor capacitors
DIAMETER
mm
CODE
Lifasa
CODE
Economic type
56.6
25
082.10.010
085.10.010
60.0
30
082.10.020
085.10.020
4
72.0
30
082.10.030
085.10.030
F1M40050PC
5
69.5
30
082.10.040
085.10.040
F1M40060PC
6
69.5
30
082.10.050
085.10.050
F1M40080PC
8
69.5
30
082.10.060
085.10.060
F1M40100PC
10
69.5
30
082.10.070
085.10.070
F1M40120PC
12
69.5
35
082.10.080
085.10.080
F1M40140PC
14
69.5
35
082.10.090
085.10.090
F1M40150PC
15
69.5
35
082.10.100
085.10.100
F1M40160PC
16
69.5
40
082.10.110
085.10.110
F1M40180PC
18
93.5
35
082.10.120
085.10.120
F1M40200PC
20
93.5
35
082.10.130
085.10.130
F1M40250PC
25
93.5
40
082.10.140
085.10.140
F1M40300PC
30
93.5
40
082.10.150
085.10.150
F1M40350PC
35
118.5
45
082.10.160
085.10.160
F1M40400PC
40
118.5
45
082.10.170
085.10.170
F1M40450PC
45
118.5
45
082.10.180
085.10.180
F1M40500PC
50
118.5
50
082.10.190
085.10.190
F1M40550PC
55
121.0
50
082.10.200
085.10.200
F1M40600PC
60
118.5
55
082.10.210
085.10.210
F1M40700PC
70
118.5
55
082.10.220
085.10.220
F1M40800PC
80
121.5
60
082.10.230
085.10.230
TYPE
µF
F1M40020PC
2
F1M40030PC
3
F1M40040PC
HEIGHT
mm
TECHNICAL CHARACTERISTICS
Voltage: 450V
Capacity: ± 5%
Frequency: 50/60 ΗΖ
Dielectric: polypropylene
Insulation tolerance: >10.000ΜΩ-μF,
continuous operation
 Temperature: -25 to 85 οC





 Standards: VDE560-8, IEC252,
UNE20031, BS5267
SPAIN
Economic
type
Lighting capacitors
LIFASA (SPAIN)
TYPE
µF
VOLT
V
HEIGHT
mm
DIAMETER
mm
CODE
P9425045P/C25C
4.5
250
56.5
25
088.10.030
P9425070P/C25C
7.0
250
69.5
25
088.10.040
P9425090P/C25C
9.0
250
69.5
25
088.10.050
P9425100P/C25C
10.0
250
69.5
30
088.10.060
P9425120P/C25C
12.0
250
69.5
30
088.10.070
P9425160P/C25C
16.0
250
69.5
30
088.10.080
P9442037P/C25C
3.75
420
69.5
30
088.12.010
 Capacity: ± 10% ή ± 5%
 Frequency: 50/60 ΗΖ
 Dielectric: polypropylene
 Insulation tolerance: >10.000ΜΩ-μF
 Temperature: -25 έως 85 οC
 Standards: VDE560-6, ΕΝ61048,
ΕΝ61049, ΚΕΜΑ Κ98, UNE20152-81,
BS4017
SPAIN
NORA - ECONOMIC TYPE
26
TYPE
µF
VOLT
V
LUX 25045P
4.5
250
LUX 25070P
6.0
250
LUX 25090P
8.0
LUX 25100P
10.0
LUX 25120P
LUX 25160P
HEIGHT
mm
DIAMETER
mm
CODE
69
25
091.10.030
69
30
091.10.040
250
69
30
091.10.050
250
69
30
091.10.060
12.0
250
93
30
091.10.070
16.0
250
93
30
091.10.080
LUX 25450P
45.0
250
100
50
091.10.090
LUX 25700P
70.0
250
112
50
091.10.100
LUX 42037P
3.75
420
93
30
091.12.010
Economic
type
Reactive power controllers
MCX
(with harmonic protection)
RKR - 12C
MCE
(without harmonic protection)
TECHNICAL CHARACTERISTICS MCX (LIFASA - SPAIN)
RKR - 1T07C
TECHNICAL CHARACTERISTICS RKR (TURKEY)
 Programs: 1:1:1:1, 1:2:2:2, 1:2:4:4, 1:2:4:8 and 1:1:2:2
 Adjustment of cosφ: inductive: 0.80 / capacitive: 0.95
 Connection time between steps: 4 - 999 sec
 True RMS, V, A, HZ
 Automatic indication of current transformer
 Frequency: 45/65 Hz
 Power consumption: 5VA
 Alarm
 Automatic detection of current direction
 Adjustment of cosφ: (0.8 inductive - 0.9 capacitive)
 Overheating and overload adjustment
 Harmonic adjustment
 Time delay adjustment of capacitor connection
 Adjustment of harmonic voltage protection (VTHD, V3, V5 ... V13)
 Adjustment of harmonic current protection (ITHD, I3, I5 ... I13)
 Voltage, Ampere, cosφ, THD: check in every line
 Capacitor power, temperature, frequency, control operation
 Successive (cyclic) capacitor connection according to the power
 High voltage alarm, temperature alarm, harmonics alarm (%)
Multi adjustments and harmonic protection
TYPE
PROTECTION
VOLTAGE (V)
STEPS
DIMENSIONS (mm)
CODE
MCX - 8A
With harmonic protection
230 - 400V, ± 15%
MCX - 8A
230 - 400V, ± 15%
6
96 x 96 x 100
078.12.010
6
144 x 144 x 100
078.12.020
MCX - 14A
230 - 400V, ± 15%
12
144 x 144 x 100
078.12.030
MCE - 6 *
Without harmonic protection
400V
6
144 x 144 x 73
078.10.010
MCE - 12 *
Without harmonic protection
400V
12
144 x 144 x 73
078.10.020
RKR - 7C
400V
7
144 x 144 x 70
078.13.010
RKR - 12C
400V
12
144 x 144 x 70
078.13.020
RKR - 1T07C
230V
7
144 x 144 x 70
078.13.040
RKR - 1T12C
230V
12
144 x 144 x 70
078.13.050
(*) Type MCE (LIFASA - SPAIN): without harmonic protection
Motor start capacitors with terminals
µF
HEIGHT (mm)
DIAMETER (mm)
CODE
24 - 36 A16
TYPE
24 - 36
86
Φ32
094.10.010
36 - 43 MFD
36 - 43
86
Φ32
094.10.020
43 - 52 MFD
43 - 52
86
Φ32
094.10.030
52 - 64 A16
52 - 64
86
Φ47
094.10.040
64 - 77 MFD
64 - 77
86
Φ47
094.10.050
72 - 86 MFD
72 - 86
86
Φ47
094.10.060
86 - 108 A16
86 - 108
86
Φ47
094.10.070
108 - 136 MFD
108 - 136
86
Φ47
094.10.080
124 - 149 MFD
124 - 149
110
Φ47
094.10.090
149 - 156 A16
149 - 156
110
Φ47
094.10.100
161 - 193 MFD
161 - 193
110
Φ47
094.10.110
193 - 220 A16
193 - 220
110
Φ47
094.10.120
216 - 259 MFD
216 - 259
110
Φ47
094.10.130
243 - 292 MFD
243 - 292
110
Φ47
094.10.140
270 - 324 MFD
270 - 324
110
Φ47
094.10.150
 Volt: 230V - 250V
Economic
type
27
Digital meters 96 x 96 x 68 mm
VIPS - 50
VIPS - 80
TYPE
PM - AV - 96
DESCRIPTION
CODE
VIPS - 50
meter
Threephase digital meter, V, A, Hz, Cosφ, KW. Automatic display change.
125.10.010
VIPS - 50
relay
Threephase digital meter, V, A, Hz, Cosφ, KW, with relay protection from undervoltage, overvoltage, overcurrent and reverse phase.
125.10.020
VIPS - 80
Power analyzer, V, A, Hz, Cosφ, KW, KVA, KVAh, KWh, KVARh.
It counts the total consumed - produced energy and their differce.
RS485 connection, palm output for PLC SCADA.
125.10.090
Singlephase digital meter, V, A, with button for scale adjustment.
125.10.080
PM - AV - 96
Digital multimeters, singlephase, 96 x 45 x 10 mm
With display
change button
DM - 9648 - 1 (125.15.010)
KM - 9648 - E (125.15.020)
TYPE
DESCRIPTION
CODE
DM - 9648 - 1
Digital ammeter - voltmeter, with switch selector Α or V.
Measurements: 0 - 600V and 60 - 2000 / 5Α (15 scales)
Supply voltage: 110 - 230V AC
125.15.010
KM - 9648 - E
Digital ammeter - voltmeter - frequency meter
Measurements: 0 - 600V AC (voltage), 5 - 8000 / 5Α (current)
Supply voltage: 110 - 230V AC
With button for current transformer scale adjustment and with display change button
125.15.020
Adjustable leakage relay και Toroidal current transformer
TYPE
VIPS 98P
DESCRIPTION
Adjustable leakage relay
Supply voltage: 240 / 110VAC, 50/60ΗΖ (-20% +15%)
Leakage adjustment: 0.03, 0.1, 0.3, 0.5, 1, 3, 5, 10, 20, 30Α
Time delay: 0, 60, 150, 250, 500, 800 mSec, 1, 2.5, 5, 10 Sec
Auxiliary contacts: 1 alarm (NO/NC), 50% of adjustment, 6Α
1 trip (NO/NC), 80-90% of adjustment, 6Α
CODE
255.15.010
VIPS 98P ( 255.15.010)
TOROIDAL CURRENT TRANSFORMERS
TYPE
28
SCALE
CODE
VIPS CBCT 35
Φ35
115.30.010
VIPS CBCT 70
Φ70
115.30.020
VIPS CBCT 120
Φ120
115.30.030
VIPS CBCT 210
Φ210
115.30.040
TECHNICAL CHARACTERISTICS OF
TOROIDAL CURRENT TRANSFORMERS
 Voltage: 720V max.
 Scale: 1/1000
 It is used with the adjustable leakage relay
VIPS 98P
VIPS CBCT
Mini rail current transformers NORA Φ22 - Φ30
DIMENSIONS
 Class: 1%
 Φ22 / Φ30: 5.5 x 5.1 x 2.7 cm
DIAMETER
mm
VA
CODE
60/5
Φ22
2.5
115.10.010
100/5
Φ22
2.5
115.10.020
150/5
Φ22
2.5
115.10.030
200/5
Φ22
2.5
115.10.040
200/5
Φ30
2.5
115.12.010
250/5
Φ30
2.5
115.12.020
300/5
Φ30
2.5
115.12.030
400/5
Φ30
2.5
115.12.040
600/5
Φ30
2.5
115.12.050
SCALE
Φ22
Φ30
Current transformers NORA Φ30 - Φ120
DIAMETER
mm
VA
60/5
Φ30
2.5
115.15.010
100/5
Φ30
2.5
115.15.020
150/5
Φ30
3
115.15.030
200/5
Φ30
5
115.15.040
250/5
Φ30
5
115.15.050
300/5
Φ40
5
115.17.010
400/5
Φ40
10
115.17.020
600/5
Φ40
10
115.17.030
800/5
Φ40
10
115.17.040
600/5
Φ60
15
115.19.010
800/5
Φ60
10
115.19.020
1000/5
Φ60
10
115.19.030
1000/5
Φ100
15
115.21.010
1200/5
Φ100
15
115.21.020
1500/5
Φ100
15
115.21.030
2000/5
Φ100
15
115.21.040
2500/5
Φ100
15
115.21.050
1000/5
Φ120
20
115.23.010
1200/5
Φ120
20
115.23.020
2000/5
Φ120
20
115.23.030
2500/5
Φ120
20
115.23.040
3000/5
Φ120
20
115.23.050
3500/5
Φ120
20
115.23.060
4000/5
Φ120
20
115.23.070
SCALE
CODE
DIMENSIONS
 Φ30 / Φ40: 10 x 7.5 x 4.3 cm
 Φ60: 12.7 x 10 x 4.3 cm
 Φ100: 15.5 x 14.5 x 4.3 cm
 Φ120: 22 x 19 x 4.3 cm
 Class: 1%
29
Analog meters, mounting on the door of the switch board NORA
96 x 96 mm
60 x 60 mm
72 x 72 mm
 Accuracy measurement for meters 80x80
and 60x60: class 2.5%
SPECIFICATIONS for meters 96 x 96 and 72 x 72
 Ammeters DC and Voltmeters AC and DC: moving coil
 Measurement accuracy: class 1.5%
 Voltage test: 2000V, 1 min
 Overload: 20% continuous
 Standards: VDE 0410, DIN 43780
AMMETERS AC
AMPERE AC
30
AMMETERS DC
CODE
96 x 96
CODE
72 x 72
CODE
80 x 80
CODE
60 x 60
AMPERE DC
CODE
80 x 80
CODE
60 x 60
5
108.10.010
108.25.010
108.40.010
108.55.010
2
-
108.59.010
10
108.10.020
108.25.020
108.40.020
108.55.020
5
108.46.010
108.59.020
15
108.10.030
108.25.030
108.40.030
108.55.030
10
108.46.020
108.59.030
20
108.10.040
108.25.040
108.40.040
108.55.040
15
108.46.030
108.59.040
25
108.10.050
108.25.050
108.40.050
108.55.050
20
108.46.040
108.59.050
30
108.10.060
108.25.060
108.40.060
108.55.060
25
108.46.050
108.59.060
40
108.10.070
108.25.070
108.40.070
108.55.070
50
-
108.25.080
-
108.55.080
30
108.46.060
108.59.070
60
108.10.080
108.25.090
108.40.080
108.55.090
40
108.46.070
108.59.080
80
108.10.090
108.25.100
108.40.090
-
100 mA
-
108.61.010
100
108.10.100
108.25.110
-
-
200 mA
-
108.61.020
60/5
108.12.010
108.27.010
108.42.010
-
300 mA
-
108.61.030
100/5
108.12.020
108.27.020
108.42.020
-
400 mA
-
108.61.040
150/5
108.12.030
108.27.030
108.42.030
-
500 mA
-
108.61.050
200/5
108.12.040
108.27.040
108.42.040
-
1000 mA
-
108.61.060
250/5
108.12.050
108.27.050
108.42.050
-
300/5
108.12.060
108.27.060
108.42.060
-
400/5
108.12.070
108.27.070
108.42.070
-
600/5
108.12.080
108.27.080
108.42.080
-
800/5
108.12.090
108.27.090
108.42.090
-
1000/5
108.12.100
108.27.100
108.42.100
1200/5
108.12.110
108.27.110
-
1500/5
108.12.120
108.27.120
-
-
2000/5
108.12.130
108.27.130
-
-
2500/5
108.12.140
108.27.140
-
-
3000/5
108.12.150
108.27.150
-
-
3500/5
108.12.160
108.27.160
-
4000/5
108.12.170
-
Plates
110.14.*
110.16.*
AMMETERS DC and SHUNT
SCALE
CODE
80 x 80
CODE
SHUNT
-
100A / 50mV
108.50.010
108.65.010
-
100A / 75mV
108.50.020
108.65.020
150A / 50mV
108.50.030
108.65.030
150A / 75mV
108.50.040
108.65.040
200A / 50mV
108.50.050
108.65.050
-
200A / 75mV
108.50.060
108.65.060
-
-
250A / 50mV
108.50.070
108.65.070
-
-
250A / 75mV
108.50.080
108.65.080
Analog meters, mounting on the door of the switch board NORA
80 x 80 mm
96 x 96 mm
72 x 72 mm
VOLTMETERS AC
VOLTMETERS DC
VOLT AC
CODE
96 x 96
CODE
72 x 72
CODE
80 x 80
CODE
60 x 60
100
108.15.010
108.29.010
108.44.010
108.57.010
150
108.15.020
108.29.020
108.44.020
108.57.020
300
108.15.030
108.29.030
108.44.030
108.57.030
500
-
-
108.44.040
108.57.040
600
108.15.040
108.29.040
-
-
15KV / 150V
108.15.050
-
-
-
25KV / 150V
108.15.060
-
-
-
CODE
80 x 80
CODE
60 x 60
15
108.48.010
108.63.010
20
108.48.020
108.63.020
30
108.48.030
108.63.030
VOLT DC
50
108.48.040
108.63.040
100
108.48.050
108.63.050
150
108.48.060
108.63.060
300
108.48.070
108.63.070
50 mV
-
108.63.080
100 mV
-
108.63.090
WATTMETERS AC
VOLT
AC
FREQUENCY METERS AC
VOLT AC
230
FREQUENCY
ΗΖ
47 - 53 / Παλµικό
CODE
96 x 96
108.22.010
CODE
72 x 72
108.35.010
400
108.22.020
108.35.020
440
108.22.030
108.35.030
230
45 - 55 / Βελόνας
108.22.040
108.35.040
400
108.22.050
108.35.050
440
108.22.060
108.35.060
POWER
KW
CODE
96 x 96
CODE
72 x 72
400
5
-
108.31.010
400
20
108.18.010
108.31.020
400
60
108.18.020
108.31.030
400
100
-
108.31.040
400
250
108.18.030
108.31.050
400
300
-
108.31.060
400
500
108.18.040
108.31.070
400
1000
108.18.050
108.31.080
400
1500
108.18.060
108.31.090
400
2000
108.18.070
108.31.100
400
3500
-
108.31.110
440
500
108.18.080
-
COSΦ METERS AC
440
440
-
108.22.070
108.35.070
108.35.080
VOLT AC
CODE
96 x 96
CODE
72 x 72
230
108.20.010
108.33.010
400
108.20.020
108.33.020
440
108.20.030
108.33.030
31
Energy meters KWH
DEM011GS
(275.10.020)
DEM015SS mini
(275.10.010)
TYPE
CURRENT (Α)
DEM021JC
(275.10.090)
VOLTAGE (V)
DEM011JC
(275.10.050)
DESCRIPTION
CODE
ANALOG METERS KWH
DEM015SS
mini
0.1 - 30A
230V
Direct measurement. Size: as a miniature circuit breaker
Sidelong reading
275.10.010
DEM011GS
DEM021EI
0.1 - 30A
230V
Direct measurement.
275.10.020
0.4 - 60A
230V / 400V
Direct measurement. Palm output 320 imp / kWh.
275.10.030
DEM021EI
5A/CT
5A / CT
230V / 400V
Measurement with external current transformer 5Α / CT.
Palm output 1600 imp / kWh.
275.10.040
DIGITAL METERS KWH
DEM011JC
0.1 - 30A
230V
7 digits display.
275.10.050
DEM011JC
έως 100Α
230V
Same as DEM011, for measurements up to 100Α.
(Upon request)
275.10.060
DEM011GC
RS485
0.1 - 30Α
230V
Same as DEM011 with communication output RS485.
275.10.070
DEM011ZA
reset
0.1 - 30Α
230V
Two displays. Continuous and temporary measurement.
Reset button for temporary measurement.
275.10.080
DEM021JC
RS485
0.4 - 50Α
in every phase
3 x 230V / 400V
Communication output RS485. 7 digits display.
275.10.090
DEM021JC
up to 100Α
3 x 230V / 400V
Same as DEM021, for measurements up to 100Α.
(Upon request)
275.10.100
DEM021JC
RS485
5A / CT
3 x 230V / 400V
Measurement with external current transformer 5Α / CT.
Display reduction to the current transformer rate is necessary.
Palm output 1600 imp / kWh. Communication output RS485.
275.10.110
DEMO SOFTWARE
Software for reading meters with output RS485.
275.15.010
DEMO COLLECTOR
Transfer devises collector
275.15.020
 Class 1
Analog and digital rail meters
DESCRIPTION
Ammeters AC
Ammeters AC
Voltmeters AC
Plates
32
AMPERE
CODE ANALOG
86 Τ1
CODE DIGITAL
SFC - 100
30A
120.10.010
-
60/5A
120.12.010
120.16.010
100/5A
120.12.020
120.16.020
150/5A
120.12.030
120.16.030
200/5A
120.12.040
120.16.040
250/5A
120.12.050
120.16.050
300/5A
120.12.060
120.16.060
400/5A
120.12.070
120.16.070
600/5A
120.12.080
120.16.080
800/5A
120.12.090
120.16.090
1000/5A
120.12.100
120.16.100
300V
120.14.010
-
500V
120.14.020
120.18.010
-
110.12.*
-
 Dimensions (H x D x W): 7 x 7.5 x 5.2 cm
Digital thermostats for industrial automation systems
TEH96 - 92001
96 x 96 mm
Single display / One contact




TEH72 - 92001
72 x 72 mm
Single display / One contact
THE - C900
96 x 96 mm
Double display / Two outputs
Types
ΤΗΕ-C900 and THE-C700
are suitable for driers and
they accept PID programs
Noise lter
Manual / Automatic operation
Thermocouple Κ type, length: 2 m (it is included)
Operation voltage: 100 - 264V AC
TYPE
THE - C700
72 x 72 mm
Double display / Two outputs
DESCRIPTION
SCALE
DIMENSIONS (mm)
CODE
TEH96 - 92001
Analogue single display (measured temperature)
1 auxiliary contact
0 - 400oC
96 x 96 x 120
354.16.010
TEH72 - 92001
Analogue single display (measured temperature)
1 auxiliary contact
0 - 400oC
72 x 72 x 100
354.16.020
THE - C900
Digital double display (measured and programmed
temperature)
2 output relays and ON - OFF button
0 - 600oC
96 x 96 x 120
354.16.030
THE - C700
Digital double display (measured and programmed
temperature)
2 output relays and ON - OFF button
0 - 600oC
72 x 72 x 100
354.16.040
Analog thermostats
 Power consumption: 6VA
 Accuracy: ± 1% FS
 Voltage: 110V / 230V AC ± 10%, 50/60 HZ
 Ouput: Relay 5Α, 1ΝΟ + 1NC
 Operation type: ON - OFF
 Analog time period: approx. 3 sec
 Operating temperature: 0 - 50 oC
TYPE
SCALE
THERMOCOUPLE
DIMENSIONS (mm)
CODE
TC - 3
0 - 400oC
K
(3m - it is included)
96 x 96 x 137
354.12.010
TC - 3
0 - 1200oC
CA - K
96 x 96 x 137
354.12.020
TC - 3
0 - 1600oC
R
96 x 96 x 137
354.12.030
TC - 3
Thermocouples
DESCRIPTION
SCALE
CODE
Thermocouple Κ type, 3 m, for thermostat TC - 3
0 - 400oC
354.14.010
Chrome - Aluminum CR - AL (K), 3 m, Ν8 Μ12, for thermostat TC - 3
0 - 400oC
354.14.020
33
Contactors NORA
High quality
Contactors and
Thermal relays
MC
MR
CONTACTORS 230V, 400V, 110V
KW
380V
ΗΡ
MC - 4
4.0
5.5
MC - 5.5
5.5
MC - 5.5
5.5
MC - 6
TYPE
MC - 7.5
CURRENT
(A)
THERMAL
CURRENT (A)
MAIN
CONT.
AUXILIARY
CONTACTS
CODE
230V
CODE
400V
CODE
110V
9
20
3
1NO
230.10.010
230.12.010
230.14.010
7.5
12
20
3
1NO
230.10.020
230.12.020
230.14.020
7.5
12
20
3
1NC
230.10.030
230.12.030
230.14.030
6.0
7.5
12
20
3
1NO / 1NC
230.10.040
230.12.040
230.14.040
7.5
10.0
16
25
3
-
230.10.050
230.12.050
230.14.050
MC - 11.1
11.0
15.0
22
32
3
1NO / 1NC
230.10.060
230.12.060
230.14.060
MC - 11.1
11.0
15.0
22
32
3
2NC
230.10.070
230.12.070
230.14.070
MC - 11.2
11.0
15.0
22
32
3
2NO / 2NC
230.10.080
230.12.080
230.14.080
MC - 15
15.0
20.0
30
50
3
2NO / 2NC
230.10.090
230.12.090
230.14.090
MC - 18
18.0
25.0
40
60
3
2NO / 2NC
230.10.100
230.12.100
230.14.100
MC - 22
22.0
30.0
50
80
3
2NO / 2NC
230.10.110
230.12.110
230.14.110
MC - 30
30.0
40.0
62
100
3
2NO / 2NC
230.10.120
230.12.120
230.14.120
MC - 45
45.0
60.0
85
110
3
2NO / 2NC
230.10.130
230.12.130
230.14.130
MC - 55
55.0
75.0
105
135
3
2NO / 2NC
230.10.140
230.12.140
230.14.140
CONTACTORS 48V, 24V
TYPE
MC - 4
MC - 5.5
1NO
MC - 5.5
1NC
MC - 6
MC - 7.5
MC - 11.1
MC - 11.2
MC - 15
MC - 18
CODE (48V)
230.16.010
230.16.020
230.16.030
230.16.040
230.16.050
230.16.060
230.16.070
230.16.080
230.16.090
CODE (24V)
230.18.010
230.18.020
230.18.030
230.18.040
230.18.050
230.18.060
230.18.070
230.18.080
230.18.090
Overload - overcurrent thermal relays NORA & Auxiliary contacts
THERMAL RELAYS MR - 16
34
SETTING (Α)
CODE
SETTING (Α)
CODE
0.5 (0.4 - 0.6)
230.25.010
3.6 (2.8 - 4.4)
230.27.010
0.9 (0.7 - 1.1)
230.25.020
5.0 (4.0 - 6.0)
230.27.020
1.3 (1.0 - 1.6)
230.25.030
1.7 (1.4 - 2.0)
230.25.040
6.6 (5.2 - 8.0)
230.27.030
2.1 (1.7 - 2.5)
230.25.050
9.0 (7.0 - 11.0)
230.27.040
2.5 (2.0 - 3.0)
230.25.060
11.0 (9.0 - 13.0)
230.27.050
3.6 (2.8 - 4.4)
230.25.070
5.0 (4.0 - 6.0)
230.25.080
6.6 (5.2 - 8.0)
230.25.090
9.0 (7.0 - 11.0)
230.25.100
11.0 (9.0 - 13.0)
230.25.110
13.5 (11.0 - 16.0)
230.25.120
15.0 (12.0 - 18.0)
230.27.060
19.0 (16.0 - 22.0)
230.27.070
22.0 (18.0 - 26.0)
230.27.080
29.0 (24.0 - 34.0)
230.27.090
35.0 (30.0 - 40.0)
230.27.100
AUXILIARY
CONTACTS
SETTING (Α)
CODE
35.0 (30.0 - 40.0)
230.29.010
42.0 (34.0 - 50.0)
230.29.020
54.0 (43.0 - 65.0)
230.29.030
TYPE
CODE
230.29.040
Ν 422
2ΝΟ/2ΝC
230.20.010
Ν 431
3ΝΟ/1ΝC
230.20.020
Ν 440
4ΝΟ
230.20.030
Ν 211
1ΝΟ/1ΝC
230.20.040
67.0 (54.0 - 80.0)
79.0 (65.0 - 93.0)
95.0 (85.0 - 105.0)
230.29.050
230.29.060
Motor starters in metal box
TYPE
SETTING
(Α)
POWER
(KW) 230V
POWER
(KW) 400V
DIMENSIONS
(mm)
CODE
230V
CODE
400V
MST - 4
0.5 (0.4 - 0.6)
2.5
4
160 x 95 x 108
235.10.010
235.20.010
MST - 4
0.9 (0.7 - 1.1)
2.5
4
160 x 95 x 108
235.10.020
235.20.020
MST - 4
1.3 (1.0 - 1.6)
2.5
4
160 x 95 x 108
235.10.030
235.20.030
MST - 4
1.7 (1.4 - 2.0)
2.5
4
160 x 95 x 108
235.10.040
235.20.040
MST - 4
2.1 (1.7 - 2.5)
2.5
4
160 x 95 x 108
235.10.050
235.20.050
MST - 4
2.5 (2.0 - 3.0)
2.5
4
160 x 95 x 108
235.10.060
235.20.060
MST - 4
3.6 (2.8 - 4.4)
2.5
4
160 x 95 x 108
235.10.070
235.20.070
MST - 4
5.0 (4.0 - 6.0)
2.5
4
160 x 95 x 108
235.10.080
235.20.080
MST - 4
6.6 (5.2 - 8.0)
2.5
4
160 x 95 x 108
235.10.090
235.20.090
MST - 4
9.0 (7.0 - 11.0)
2.5
4
160 x 95 x 108
235.10.100
235.20.100
MST - 4
11.0 (9.0 - 13.0)
2.5
4
160 x 95 x 108
235.10.110
235.20.110
MST - 11
9.0 (7.0 - 11.0)
5.5
11
160 x 95 x 108
235.12.010
235.22.010
MST - 11
11.0 (9.0 - 13.0)
5.5
11
160 x 95 x 108
235.12.020
235.22.020
MST - 11
15.0 (12.0 - 18.0)
5.5
11
160 x 95 x 108
235.12.030
235.22.030
MST - 11
19.0 (16.0 - 22.0)
5.5
11
160 x 95 x 108
235.12.040
235.22.040
MST - 11
22.0 (18.0 - 26.0)
5.5
11
160 x 95 x 108
235.12.050
235.22.050
MST - 18.5
29.0 (24.0 - 34.0)
11.0
18.5
215 x 135 x 126
235.16.010
235.26.010
MST - 18.5
35.0 (30.0 - 40.0)
11.0
18.5
215 x 135 x 126
235.16.020
235.26.020
MST - 4
MST - 11
Fuse holders
TYPE
BASES FOR FUSES
CURRENT (Α)
POLES (Ρ)
CODE
ST 32
10 x 38
32
1
270.10.010
ST 32
10 x 38
32
2
270.10.020
ST 32
10 x 38
32
3
270.10.030
ST 32
10 x 38
32
4
270.10.040
ST 63
14 x 51
63
1
270.12.010
ST 63
14 x 51
63
2
270.12.020
ST 63
14 x 51
63
3
270.12.030
ST 63
14 x 51
63
4
270.12.040
ST 100
22 x 58
100
1
270.14.010
ST 100
22 x 58
100
2
270.14.020
ST 100
22 x 58
100
3
270.14.030
ST 100
22 x 58
100
4
270.14.040
1P
2P
3P
4P
Fuses (GLe)
STABILIZER
KVA
DESCRIPTION
CURRENT
(Α)
VOLTAGE
(V)
ΚΩΔΙΚΟΣ
6
Ασφάλεια κυλινδρική 10 x 38 mm
10
660
273.10.020
9
16
660
273.10.030
15
25
660
273.10.040
-
32
660
273.10.050
22.5 - 30
50
690
273.10.060
40
63
690
273.10.070
50
80
690
273.10.080
60
100
690
273.10.090
75
Ασφάλεια µαχαιρωτή
125
660
273.15.010
90
Ασφάλεια µαχαιρωτή
160
660
273.15.020
 They are necessary for surge
and overload protection of
stabilizers.
 Fuses 1000V DC suitable
for photovoltaic systems: upon
request.
35
Adjustable thermomagnetic motor starters
TYPE
SETTING
RANGE
POWER OF 3PHASE
MOTORS AC3
CODE
CODE IN
PLASTIC BOX
LS 0.63
0.4 - 0.63 Α
0.12 KW
240.10.010
240.12.010
LS 1
0.63 - 1.0 Α
0.25 KW
240.10.020
240.12.020
LS 1.6
1.0 - 1.6 Α
0.37 KW
240.10.030
240.12.030
LS 2.5
1.6 - 2.5 Α
0.75 KW
240.10.040
240.12.040
LS 3.2
2.0 - 3.2 Α
1.10 KW
240.10.050
240.12.050
LS 4
2.5 - 4.0 Α
1.10 KW
240.10.060
240.12.060
LS 5
3.2 - 5.0 Α
1.50 KW
240.10.070
240.12.070
LS 6.3
4.0 - 6.3 Α
2.20 KW
240.10.080
240.12.080
LS 8
5.0 - 8.0 Α
3.00 KW
240.10.090
240.12.090
LS 10
6 - 10 Α
3.00 KW
240.10.100
240.12.100
LS 12
8 - 12 Α
4.00 KW
240.10.110
240.12.110
LS 14
9 - 14 Α
5.50 KW
240.10.120
240.12.120
LS 16
10 - 16 Α
7.50 KW
240.10.130
240.12.130
LS 18
13 - 18 Α
7.50 KW
240.10.140
240.12.140
LS 20
16 - 20 Α
9.00 KW
240.10.150
240.12.150
LS 23
17 - 23 Α
9.00 KW
240.10.160
240.12.160
LS 26
20 - 26 Α
11.00 KW
240.10.170
240.12.170
LS 32
24 - 32 Α
15.00 KW
240.10.180
240.12.180
TYPE
DESCRIPTION
CODE
ΑΕ 20
Auxiliary contact front side 2NO
242.10.010
AE 11
Auxiliary contact front side 1NO + 1NC
242.10.020
AD 0101
Auxiliary contact left side 1NC (alarm) + 1NC (aux.)
242.10.030
AD 1001
Auxiliary contact left side 1NO (alarm) + 1NC (aux.)
242.10.040
AD 0110
Auxiliary contact left side 1NC (alarm) + 1NO (aux.)
242.10.050
AD 1010
Auxiliary contact left side 1NO (alarm) + 1NO (aux.)
242.10.060
AV 385
Undervoltage trip right side 380V/400V 50Hz or 440V 60Hz
242.10.070
AV 225
Undervoltage trip right side 230V / 240V 50Hz
242.10.080
AS 385
Shunt trip right side 380V / 400V 50Hz or 440V 60Hz
242.10.090
AS225
Shunt trip right side 230V / 240V 50Hz
242.10.100
Empty plastic box. (Box dimensions: 15 x 8.5 x 9.5 cm)
240.15.010
-
400/415V
50/60HZ
Adjustable thermomagnetic
motor starters
ΑD 0110
ΑΕ 11
Empty plastic box
(240.15.010)
Surge protection switches, rail type
(ΒΥ-1)
 Maximum current (In): 40KA
 Pulse: 8/20μs
 Phase and neutral protection
 Same dimensions as MCB’s
(DGM-YPV-SCI 1000)
 Short circuit and surge protection
 With DC MCB
 Full protection for photovoltaic systems DC
36
DGM-YPV-SCI 1000
Spare part
One pole
Three pole
TYPE
POLES
ΚΑ
OPERATING
VOLTAGE
ΒΥ - 1 - C
1P
I max:40 / In:20
230V / 320V
265.10.010
ΒΥ - 1 - C/2
2P
I max:40 / In:20
230V / 320V
265.10.020
ΒΥ - 1 - C/4
4P
I max:40 / In:20
400V / 420V
265.10.030
265.10.050
DGM-YPV-SCI 1000
Short circuit and
surge protection switches
for photovoltaic systems
3P
I max:40 / In:12.5
s/c current: 30KA / 1000VDC
 1000VDC
265.20.010
-
CODE
SPARE PART
CODE
265.10.040
MCB switches, charac. Β and C 6KA, NORA
CURRENT
CODE
CHAR. Β
CODE
CHAR. Β
CODE
CHAR. Β
CODE
CHAR. C
FOR MOTORS
(Α)
1P
Pack.: 12
2P
Pack.: 6
3P
Pack.: 4
3P
Pack.: 4
1
250.10.010
-
-
-
2
250.10.020
-
-
-
3
250.10.030
-
-
-
4
250.10.040
250.13.010
-
-
6
250.10.050
250.13.020
-
-
10
250.10.060
250.13.030
250.16.010
250.18.010
16
250.10.070
250.13.040
250.16.020
250.18.020
20
250.10.080
250.13.050
250.16.030
250.18.030
25
250.10.090
250.13.060
250.16.040
250.18.040
32
250.10.100
250.13.070
250.16.050
250.18.050
40 *
250.10.110
250.13.080
250.16.060
250.18.060
50 *
250.10.120
250.13.090
250.16.070
250.18.070
63 *
250.10.130
250.13.100
250.16.080
250.18.080
Standards:
EN 60898
1Ρ
2Ρ
3Ρ
(*) Note: Switches over 40Α are 4ΚΑ.
Rail switches and Leakage relays (RCCB), NORA
RAIL SWITCHES OF BEST QUALITY, NORA
 Wide diameter cables can be used
 With checking port
CURRENT
(Α)
CODE 1Ρ
Package: 12
CODE 2Ρ
Package: 6
CODE 3Ρ
Package: 4
40
250.20.010
250.20.020
250.20.030
60
-
-
250.20.040
1Ρ
2Ρ
3Ρ
LEAKAGE RELAYS (RCCB) NORA
TYPE
POLES
(P)
CURRENT
(Α)
OPER. CURR.
(mA)
PACKAGE
ΚΩΔΙΚΟΣ
F362
2
40
30
100
255.10.010
F364
4
40
30
50
255.10.020
F364
4
63
30
50
255.10.040
4Ρ
Busbar connections
One pole ΒΒ 101 (215.32.010)
One pole ΒΒ 102 (215.32.040)
TYPE
DESCRIPTION
INSULATION
POLES / 1 METER
ΒΒ 101
Pin type 63Α
With insulation
One pole
ΒΒ 201
Pin type 63Α
With insulation
Two poles
ΒΒ 301
Pin type 63Α
With insulation
Three poles
ΒΒ 102
U type 63Α
With insulation
One pole
ΒΒ 202
U type 63Α
With insulation
Two poles
ΒΒ 302
U type 63Α
With insulation
Three poles
BBU
U type 63Α
Without insulation
One pole
One pole ΒΒU (215.32.200)
PACKAGE
CODE
56 x 1P
10
215.32.010
27 x 2P
6
215.32.020
18 x 3P
6
215.32.030
56 x 1P
10
215.32.040
27 x 2P
10
215.32.050
18 x 3P
3
215.32.060
56 x 1P
-
215.32.200
-
Plastic end cup for one pole busbar connections ΒΒ101 & ΒΒ102
215.34.010
-
Plastic end cup for two poles busbar connections ΒΒ 201 & ΒΒ 202
215.34.020
-
Plastic end cup for three poles busbar connections ΒΒ 301 & ΒΒ 302
215.34.030
Plastic
end cup
37
Indicating rail bulbs NORA
C45
Νέον Fix
262.10.010
RMB-101
Νέον Fix
262.10.020
ASF-E
E10 Νέον
262.10.040
TYPE
M3R
M3C
LM1R
E10 Νέον
E10 Νέον
LED Fix
262.10.050 262.10.060 262.10.080
ASF-L
LED Fix
262.10.090
DGAD-31
LM3R
LED Fix
E10 LED
262.10.100 262.10.110
LM3C
E10 LED
262.10.120
BULB
No OF BULBS
COLOUR
PACKAGE
CODE
C45 (economic type)
Ν17 - Neon Fix
1
Red
12
262.10.010
RMB - 101
Ν17 - Neon Fix
1
Red
20
262.10.020
RMB - 103
Ε10 - Neon
3
Red - Red - Red
20
262.10.030
ASF - E (with fuse 1Α)
Ε10 - Neon
1
Red
10
262.10.040
M3R
E10 - Neon
3
Red - Red - Red
12
262.10.050
M3C
E10 - Neon
3
Green - Yellow - Red
12
262.10.060
RMB - 104
Ε10 - Led
3
Red - Yellow - Green
20
262.10.070
LM1R
LED - Fix
1
Red
12
262.10.080
ASF - L (with fuse 1Α)
LED - Fix
1
Red
12
262.10.090
DGAD - 31
LED - Fix
3
Red - Red - Red
12
262.10.100
LM3R
LED - E10
3
Red - Red - Red
12
262.10.110
LM3C
LED - E10
3
Green - Yellow - Red
12
262.10.120
Staircase time switches, rail type
Technical characteristics of time delay switch KLT
Technical characteristics of time delay switch Ε8
 Time selection ability: 0 - 6 min.
 Switch for continuous or not operation. Accuracy of time repetition.
 It can operate with continuous load of 16A, without being overheated or destroyed.
So, it doesn’t need intermediate relay, reducing the mounting cost.
 It can operate continuously in case of pushing button with time repetition.
 Every pushing of the button it means time repetition.
 In case of wrong wiring connection, the switch is not destroyed. It simply does not operate.
 Attention: The lighting buttons do not affect its operation.
 Current: 16Α
 Setting time: 1 - 7 min
 Package: 10 pcs
TYPE
DESCRIPTION
CODE
E8
Electronic time delay switch,
economic type
280.16.010
KLT
Staircase time switch, heavy duty
180.23.010
Ε8 (280.16.010)
KLT (180.23.010)
G2PT (423.10.010)
S220E (423.10.020)
Turnover switch
 Package: 10 pcs
TYPE
DESCRIPTION
CODE
45107
Turnover switch
250.25.010
Sucko sockets
38
TYPE
DESCRIPTION
CODE
G2PT
Sucko socket, din rail type
423.10.010
S220E
Sucko socket for panels,
mounting type with cover
423.10.020
Electronic time switches, rail type
ΤΗ - 857: Electronic Daily and Weekly time switch, 15 selections,
simple programming, technologically improved. It is not affected by
inductive current.






Backup time 200 hours, 8 ON - 8 OFF programs
Noise protection
Minimum programming: 1 min
Relay: 16 (8) Α, 250V AC
On - Auto - Off switch
Battery: Nicad 1.2V
ΤΗ - 8572: Electronic Weekly time switch, 2 channels
 1ο channel: 4 options On and 4 options Off
 2ο channel: 3 options On and 3 options Off
 All options are repeated every day
 Backup time: 200 hours
 Noise protection
 Manual operation with On - Auto - Off switch
 Minimum programming: 1 min
 Every channel has its own operation indicating lamp.
 Relay: 16 (8) Α, 230V AC
 Battery: Nicad 1.2V
ΤΗ - 857 (280.14.010)
TYPE
ΤΗ - 8572 (280.14.020)
DESCRIPTION
CODE
TH - 857
Electronic daily and weekly
time switch, rail type
280.14.010
TH - 8572
Electronic weekly time
switch, rail type, 2 channel
280.14.020
Analog time switches, rail type
Attention:
 Batteries cannot be replaced.
 The time switches cannot operate when the
batteries are off and they have to be replaced
by new time switches.
ΤΒ - 370 (280.12.010)
ΤΗ - 45 (280.12.020)
TYPE
DESCRIPTION
CODE
ΤΒ - 370
Plastic time switch, rail type, with metallic pins, mounted also on the wall, backup time: 150 hours.
Recharging batteries: ΑΑΑ1.5V (easy replacement from the front side).
Adjustments On - Off: 96. Adjustments every 15 min. 230V AC, 15A
280.12.010
ΤΒ - 45
mini
Mini time switch, rail type, 24hours, backup time: 100 hours. Dimensions the same as MCBs.
Adjustment: every 15 min. 250V AC, 16A
280.12.020
Analog time switches
TYPE
DESCRIPTION
CODE
ΤΒ - 35
Metallic time switch, mounted on the wall,
24hours, selection: 50/60ΗΖ.
Adjustment: every 15 min. 230V, 20A
280.10.010
ΤΒ 35ΜΕ
Metallic time switch, mounted on the wall, 100 hrs
backup time. Batteries can be replaced.
280.10.020
ΤΒ - 35Ε
Plastic time switch, mounted on the wall, 24hours,
100 hours backup time. Batteries can be replaced. Adjustment: every 15 min. 230V, 15A
280.10.030
Spare part battery for the time switches ΤΒ 35ΜΕ
and ΤΒ 35Ε
280.10.095
ΤΒ - 17
Plastic time switch, mounted on the wall and
rail type, 24hours.
280.10.040
ΤΒ - 37
Time switch mounted on the panel door.
Manual selection: On - Auto - Off.
Adjustment: every 15 min
280.10.050
ΤΒ - 35 (280.10.010) &
ΤΒ - 35ΜΕ (280.10.020)
ΤΒ - 17 (280.10.040)
ΤΒ - 35Ε (280.10.030)
ΤΒ - 37 (280.10.050)
39
Cam switches Salzer
TYPE
POSITIONS
CURRENT
(Α)
POLES
(Ρ)
CODE
SWITCHES 0 - 1 900
RT16 - 61191
0-1
16
1
130.10.010
RT16 - 61192
0-1
16
2
130.10.020
RT16 - 61199
0-1
16
3
130.10.030
RT25 - 61191
0-1
25
1
130.10.040
RT25 - 61192
0-1
25
2
130.10.050
RT25 - 61199
0-1
25
3
130.10.060
RT25 - 61194
0-1
25
4
130.10.070
RT32 - 61191
0-1
32
1
130.10.080
RT32 - 61192
0-1
32
2
130.10.090
RT32 - 61199
0-1
32
3
130.10.100
RT40 - 61199
0-1
40
3
130.10.110
RT40 - 61194
0-1
40
4
130.10.120
RT63 - 61199
0-1
63
3
130.10.130
RT63 - 61194
0-1
63
4
130.10.140
S100 - 61199
0-1
100
3
130.10.150
S100 - 61194
0-1
100
4
130.10.160
S200 - 61199
0-1
200
3
130.10.170
S200 - 61194
0-1
200
4
130.10.180
With protected
contacts
Switch
0-1
DOUBLE THROW SWITCHES 1 - 0 - 2 1800
RT16 - 61151
1-0-2
16
1
130.11.010
RT16 - 61152
1-0-2
16
2
130.11.020
RT16 - 61153
1-0-2
16
3
130.11.030
RT16 - 61154
1-0-2
16
4
130.11.040
RT25 - 61151
1-0-2
25
1
130.11.050
RT25 - 61152
1-0-2
25
2
130.11.060
RT25 - 61153
1-0-2
25
3
130.11.070
RT25 - 61154
1-0-2
25
4
130.11.080
RT32 - 61153
1-0-2
32
3
130.11.090
RT40 - 61153
1-0-2
40
3
130.11.100
RT40 - 61154
1-0-2
40
4
130.11.110
RT63 - 61153
1-0-2
63
3
130.11.120
RT63 - 61154
1-0-2
63
4
130.11.130
S100 - 61153
1-0-2
100
3
130.11.140
S100 - 61154
1-0-2
100
4
130.11.150
Double throw switch
1-0-2
MULTI STEP SWITCHES
40
RT16 - 61060
0 -1 - 2 - 3
16
1
130.13.010
RT 25- 61080
0 -1 - 2 - 3
25
2
130.13.020
RT 25- 61061
0 -1 - 2 - 3 - 4
25
1
130.13.030
RT 16- 61063
0 -1 - 2 - 3 - 4 - 6
16
1
130.13.040
RT 25- 61063
0 -1 - 2 - 3 - 4 - 6
25
1
130.13.050
Multi step switch
0-1-2-3
Cam switches Salzer
TYPE
CURRENT
(Α)
POSITIONS
POLES
(Ρ)
CODE
DOUBLE THROW SWITCHES WITH SPRING RETURN TO BOTH SIDES
RT16 - 61363
Return - 0 - Return
16
3
130.15.010
STARTING SWITCHES FOR ONE PHASE MOTORS
RT16 - 61701
0 - 1 - Return
16
2
130.17.010
RT25 - 61701
0 - 1 - Return
25
2
130.17.020
3
130.19.010
Starting switch 0 - 1 - Return
TWO SPEED, TWO WINDING SWITCHES
RT16 - 61219
0-1-2
16
STAR DELTA SWITCHES
RT16 - 61200
Off - Star - Delta
16
3
130.21.010
RΤ25 - 61200
Off - Star - Delta
25
3
130.21.020
RΤ32 - 61200
Off - Star - Delta
32
3
130.21.030
RT63 - 61200
Off - Star - Delta
63
3
130.21.040
Star delta switch
FORWARD - O - REVERSE SWITCHES
RT16 - 61211
FOR - 0 - REV
16
3
130.23.010
RT25 - 61211
FOR - 0 - REV
25
3
130.23.020
RT63 - 61211
FOR - 0 - REV
63
3
130.23.030
For - O - Rev switch
VOLT / AMMETER SWITCHES
ΤΡ16 - 61313
Voltmeter
7 positions
10
3
130.25.010
ΤΡ16 - 61325
Ammeter
4 positions
10
3
130.25.020
Economic
type
VOLT / AMMETER SWITCHES, ECONOMIC TYPE
CV34 / Voltmeter
7 positions
20
3
130.27.010
CA34 / Ammeter
4 positions
20
3
130.27.020
Voltmeter switch
Switches Salzer Φ22
TYPE
POSITIONS
CURRENT
(Α)
POLES
(Ρ)
CODE
ΤΡ10 - 61191 - Β14
0-1
10
1
130.29.010
ΤΡ10 - 61199 - Β14
0-1
10
3
130.29.020
RT16 - 61199 - Β19
0-1
16
3
130.29.030
RT25 - 61191 - Β19
0-1
25
1
130.29.040
RT25 - 61199 - Β19
0-1
25
3
130.29.050
ΤΡ10 - 61151 - Β14
1-0-2
10
1
130.29.060
ΤΡ10 - 61153 - Β14
1-0-2
10
3
130.29.070
41
Mini circuit breakers
TYPE
CURRENT (Α)
CODE
5
258.10.010
7
258.10.020
10
258.10.030
15
258.10.040
 Max. voltage: 250V AC / 50V DC
 Onepole
 With return push button
 Suitable for small electrical appliances
 Package: 50 pcs
HW - 15MB
Microswitches On - Off
ONEPOLE
TWOPOLES
DESCRIPTION
POLES
(Ρ)
CODE
10Α
CODE
15Α
DESCRIPTION
POLES
(Ρ)
CODE
10Α
CODE
15Α
ON - OFF
2
143.10.010
143.15.010
ON - OFF
4
143.12.010
143.17.010
ON - ON
3
143.10.020
143.15.020
ON - ON
6
143.12.020
143.17.020
ON - OFF - ON
3
143.10.030
143.15.030
ON - OFF - ON
6
143.12.030
143.17.030
Illuminated rocker switches
RH110-C5L-BR1
(145.10.010)
R210-F5L-BR
(145.10.020)
R220-F5L-BR
(145.10.030)
R210-1C2L-BR
(145.10.040)
 Volt: 230V AC
 Ampere: 15A
42
TYPE
DESCRIPTION
POLES
(Ρ)
CODE
RH110-C5L-BR1
Narrow ON - OFF
3
145.10.010
R210-F5L-BR
Flat ON - OFF
4
145.10.020
R220-F5L-BR
Flat ON - OΝ
6
145.10.030
R210-1C2L-BR
Flat with two switches ON - OFF
6
145.10.040
Four pole turnover switches with shaft
 Suitable for generators
TYPE
CURRENT
(Α)
POLES
(Ρ)
POWER 380V
AC3 (KW)
CODE
ΜΒ34 31154 ΕΒ263
(mounting on rail)
63
4
22
130.39.010
ΜΒ34 31154 ΕΒ125
(mounting on panel
side)
125
4
30
130.39.020
Three pole rail switches
TYPE
CURRENT
(Α)
POLES
(Ρ)
POWER 380V
AC3 (KW)
CODE
Β23 31309 LB225
25
3
12
130.50.010
Β23 31309 LB232
32
3
15
130.50.020
Β23 31309 LB240
40
3
19
130.50.030
Β23 31309 LB263
63
3
30
130.50.040
Three pole cam switches mounted on the side of panel
 Easy installation by vertical cable connection.
TYPE
CURRENT
(Α)
POLES
(Ρ)
POWER 380V
AC3 (KW)
CODE
B33 31309 LB240
40
3
19
130.32.010
B33 31309 LB263
63
3
22
130.32.020
Four pole switches in waterproof plastic box, IP65
IP 65
B31SM (130.55.010)
B31M (130.55.030)
TYPE
CURRENT
(Α)
POLES
(Ρ)
POWER 380V
AC3 (KW)
CODE
B31SM 31400 LB225
25
4
7.5
130.55.010
B31SM 31400 LB232
32
4
11.0
130.55.020
B31M 31409 LB240
40
4
18.5
130.55.030
B31L 31409 LB100
100
4
30.0
130.55.040
B31L
43
Four pole motor transfer switches 1 - 0 - 2
CURRENT
(Α)
TYPE
WN3
POLES
(Ρ)
POWER 380V
AC3 (KW)
DIMENSIONS
H x W x D (mm)
WEIGHT
(Kg)
CODE
63A
63
4
30
190 x 226 x 112
6.2
130.42.010
WN3 200A
200
4
97
194 x 298 x 112
7.3
130.42.020
WN3 400A
400
4
193
290 x 410 x 132
16.2
130.42.030
WN3 630A
630
4
305
390 x 470 x 160
25.0
130.42.040
WN3 800A
800
4
387
390 x 470 x 160
42.0
130.42.050
WN3 1000A
1000
4
484
390 x 530 x 160
49.0
130.42.060
WN3 1250A
1250
4
605
390 x 530 x 160
51.0
130.42.070
WN3 1600A
1600
4
775
390 x 610 x 160
59.0
130.42.080
WN3 2000A
2000
4
969
390 x 610 x 160
135.0
130.42.090
WN3
Motor transfer switches (ATS)
 Voltage: 380V / 400V
 Mounting: on the back side of the panel
 2NO / 2NC: 230V, 2.5Α
 Automatic / Manual operation
MONITOR OF MOTOR TRANSFER SWITCHES WN3
TYPE
DESCRIPTION
CODE
ATS - ST
ATS - ST monitors the 3 phases of mains supply and of the motor and it is
connected to the transfer switch WN3, giving it the tranfering orders. In case
of overvoltage, undervoltage or power failure, it orders the motor to start operation (remote start) and it also gives order to the switch to start the transfer
operation. When the mains voltage comes to the regular levels, it returns the
switch to its initial position and it stops the motor operation. Transfer time
and delay time are adjustable.
130.44.010
ATS - ST
Load break switches with axis, back side and rail type mounting
TYPE
POSITION
CURRENT (Α)
POLES (Ρ)
CODE
LB225:31309
0-1
25
3
130.35.010
LB240:31309
0-1
40
3
130.35.020
LB263:31309
0-1
63
3
130.35.030
LB080:31309
0-1
80
3
130.35.040
LB100:31309
0-1
100
3
130.35.050
LB125:31309
0-1
125
3
130.35.060
LB100:31409
0-1
100
4
130.37.040
LB125:31409
0-1
125
4
130.37.050
LB160:31409
0-1
160
4
130.37.060
LB160:31309
0-1
160
3
130.47.010
LB200:31309
0-1
200
3
130.47.020
LB250:31309
0-1
250
3
130.47.030
LB400:31309
0-1
400
3
130.47.040
LB200:31409
0-1
200
4
130.49.010
LB250:31409
0-1
250
4
130.49.020
LB400:31409
0-1
400
4
130.49.030
Contacts for load break switches LB240
44
TYPE
DESCRIPTION
CODE
FMC 40
Contacts for load break switches LB 240
130.99.010
LB225
LB400
LB160
Push buttons Φ22, ΙΡ65, NORA
PUSH BUTTONS
TYPE
10Α / 250V
7.5A / 380V
COLOUR
CODE
 Package: 15 pcs
ILLUMINATED PUSH BUTTONS Β9aS
 Only inductive bulbs or
LED bulbs or lament
bulbs 24V with current
transformer can be used
TYPE
COLOUR
CODE
ESF2C - 4 01/1ΝC
Red
150.10.010
ESΡF2C - 4 01/1ΝC
Red
150.10.040
ESF2C - 3 10/1ΝO
Green
150.10.020
ESΡF2C - 3 10/1ΝO
Green
150.10.050
ESF2C - 2 10/1ΝO
Black
150.10.030
ESΡF2C - 5 10/1ΝO
Yellow
150.10.060
KEY SWITCHES
SHORT HANDLE SWITCHES
TYPE
DESCRIPTION
CODE
ESK2C-2-23
10/1NO
0 - Spring return
150.12.060
ESK2C-2-22
10/1NO
0-1-Withdrawal: 0 & 1
150.12.070
TYPE
POSITION
CODE
ESD2C2 - 21 10/1NO
0-1
150.12.010
ESK2C-2-21
10/1NO
0-1-Withdrawal: 0
150.12.080
ESD2C2 - 31 20/2NO
1-0-2
150.12.020
ESKHA-3C
1NC
Key switch
150.24.010
ΙΡ65
LONG HANDLE SWITCHES
SIGNAL LAMP Β9aS
 Only inductive bulbs or
lament bulbs 24V with
current transformer can
be used
TYPE
POSITION
CODE
TYPE
COLOUR
CODE
ESJ2C - 2 - 21 10/1NO
0-1
150.12.030
ΕP2 - 4 - L
Red
150.24.020
ESJ2C - 2 - 31 20/2NO
1-0-2
150.12.040
ΕP2 - 3 - L
Green
150.24.030
ESJ2C - 2 - 22 10/1NO
0 - Return
150.12.050
ΕP2 - 5 - L
Yellow
150.24.040
MASHROOM PUSH BUTTONS
DOUBLE PUSH BUTTON WITH BULB Β9aS
 Pack.: 10 pcs
TYPE
DESCRIPTION
CODE
ESL2C-4 01/1NC
Laching mashroom
150.24.050
TYPE
POSITION
CODE
ESM2C-4 01/1NC
Mashroom head
150.24.060
ΡΒ22 - Ν4 1ΝΟ+1ΝC
0-1
150.24.070
PLATES FOR Φ22 PUSH BUTTONS
DESCRIPTION
CODE
ON, OFF, OFF - ON, START,
STOP, 0 - 1, 1 - 0 - 2, DOWN,
RESET, RUN, SLOW
172.12.*
CONTACTS FOR PUSH BUTTONS
Plates
Contacts
TYPE
COLOUR
CODE
EC - 20 - 01 1NC
Red
150.26.010
EC - 20 - 10 1NO
Green
150.26.020
45
Push buttons Φ22
PUSH BUTTONS
DOUBLE PUSH BUTTONS
ΙΡ40
TYPE
CONTACTS
CODE
TYPE
CONTACTS
CODE
NW3 - MA42
1NC
Red
156.10.010
NW3 - MW8465
1NO+1NC
156.10.130
NW3 - MA31
1NO
Green
156.10.020
LAMPS 380V
ILLUMINATED PUSH BUTTONS WITH BULB Β9aS
TYPE
CONTACTS
COLOUR
CODE
NW3 - MW3361
1ΝΟ
Green
156.10.030
NW3 - MW3461
1ΝC
Red
156.10.040
NW3 - MW3561
1ΝΟ
Yellow
156.10.050
TYPE
COLOUR
CODE
ΝΕΟΝ Β9aS
CODE
LED
NW3 - MV63
Green
156.10.160
156.10.190
NW3 - MV64
Red
156.10.170
156.10.200
NW3 - MV65
Yellow
156.10.180
156.10.210
KEY PUSH BUTTONS
TYPE
CONTACTS
WITHDRAWAL
CODE
TYPE
CONT.
NW3 - MG21
1NO
0
Same keys
156.10.140
NW3 - MR42
1NC
Mashroom head
Head: Φ60
156.10.110
NW3 - MG41
1NO
0&1
Same keys
156.10.150
NW3-MS542
1NC
Laching mashroom
Head: Φ40
156.10.120
SWITCHES
DESCRIPTION
CODE
PUSH BUTTON CONTACTS
TYPE
POSITION
HANDLE
CODE
NW3-MJ21 1NO
0-1
Long
156.10.060
NW3-MJ33 2NO
1-0-2
Long
156.10.070
NW3-MD21 1NO
0-1
Short
156.10.080
NW3-MD33 2NO
1-0-2
Short
156.10.090
NW3-MJ53 2NO
Ret. - 0 - Ret.
Long
156.10.100
TYPE
CONTACTS
CODE
NW3 - ME101
1ΝΟ
156.12.010
NW3 - ME102
1ΝC
156.12.020
 Package: 20 pcs (except for codes 156.10.110, 156.10.120 and 156.10.130 which package has 10 pcs)
46
COLOUR
Push buttons Φ22 / Φ30, ΙΡ65, Economic type
PUSH BUTTONS Φ22 / Φ30
ILLUM. PUSH BUTTON Φ22/Φ30 WITH BULB Ε10
10Α / 600V
IP 65
 Package: 10 pcs
TYPE
TYPE
COLOUR
COLOUR
CODE
CODE
IDSE 22MP 01R / NC
Red
153.12.010
FPB 22MP 01R / NC
Red
153.10.010
IDSE 22MP 10G / NO
Green
153.12.020
FPB 22MP 10G / NO
Green
153.10.020
IDSE 22MP 10Y / NO
Yellow
153.12.030
SWITCHES Φ22 / Φ30
MASHROOM PUSH BUTTON Φ22 / Φ30
TYPE
POSITION
CODE
LKOS 22MP 201 / NO
Long handle
0-1
153.14.010
LKOS 22MP 320 / 2NO
Long handle
1-0-2
SKOS 22MP 201 / NO
Short handle
0-1
SKOS 22MP 320 / 2NO
Short handle
1-0-2
153.14.020
Economic
type
153.14.040
Φ30
CODE
Φ22
CA-22MP-TR
CODE
Φ30
CA-30MP-TR
Red
110 / 6.3
153.20.010
153.22.010
Green
110 / 6.3
153.20.020
153.22.020
Yellow
110 / 6.3
153.20.030
153.22.030
Red
230 / 6.3
153.20.040
153.22.040
Green
230 / 6.3
153.20.050
153.22.050
Yellow
230 / 6.3
153.20.060
153.22.060
Red
440 / 6.3
153.20.070
153.22.070
Green
440 / 6.3
153.20.080
153.22.080
Yellow
440 / 6.3
153.20.090
153.22.090
ON, OFF, OFF - ON, START,
STOP, I - II, I - 0 - II
MPB 22MP 01R / NC
Mashroom head
Red
153.16.010
LMB 22MP 01R / NC
Laching mashroom
Red
153.16.020
AE - 22 / NC
Illuminated laching
mashroom
Red
153.16.030
Φ22
TYPE
CODE
172.14.*
Φ30
COLOUR
CODE
CA 22MP NR
Lamps Φ22/Φ30
Red
153.18.010
CA 22MP NG
Lamps Φ22/Φ30
Green
153.18.020
CA 22MP NY
Lamps Φ22/Φ30
Yellow
153.18.030
MP - LP - 30
Lamps Φ30
Red
153.24.010
MP - LP - 30
Lamps Φ30
Green
153.24.020
MP - LP - 30
Lamps Φ30
Yellow
153.24.030
PUSH BUTTON CONTACTS
(Package: 40 pcs)
PUSH BUTTON PLATES ΜΡ Φ22 / Φ30
DESCRIPTION
CODE
NEON LAMPS Ε10 Φ22 AND Φ30
TYPE
V
COLOUR
COLOUR
153.14.030
FILAMENT LAMPS Ε10
WITH TRANSFORMER
Φ22
TYPE
Plates
Contacts
TYPE
COLOUR
CODE
1NO 22/30 MP 1A
Black
153.26.010
1NC 22/30 MP 1B
Red
153.26.020
47
Push buttons Φ22
PUSH BUTTONS
NEON LAMPS Β9aS
TYPE
CODE
TYPE
CODE
TYPE
159.12.010
ΡΒ - ΧΑ / NC
Red
159.10.010
PL - 22
Red
159.16.010
ΡΒ - ΧΑ / NO
Green
159.10.020
PL - 22
Yellow
159.16.020
PL - 22
Green
159.16.030
COLOUR
ΡΒ - ΧΒ
ΡΒ - ΧΒ
ΡΒ - ΧΒ
Red
Green
159.12.020
Yellow
COLOUR
LAMPS (NEON FIX N17 WITH
RESISTOR) 230V Φ14
Push button covers
Black/Red/Green/Transp.
159.12.030
159.14.010
TYPE
WITHDR.
CODE
AKS - 22
ON & OFF
0 - 1 / ΝΟ
159.18.010
CODE
DOUBLE PUSH BUTTON
WITH LED
DOUBLE PUSH BUTTON
WITH LAMP Β9aS
KEY SWITCH
COLOUR
TYPE
CODE
TYPE
CODE
ΑΡ - ΒΒ - 22 1ΝΟ / 1ΝC
159.18.020
LA32-HND 1ΝΟ/1ΝC
159.20.010
 Package: 10 pcs (except codes 150.14.010, 150.14.020 and 150.14.030 which package has 50 pcs)
Square head push buttons Φ16, IP65
TYPE
DESCRIPTION
CODE
ESM1C - 4
1ΝΟ / 1ΝC
Mashroom head
150.16.010
ESL1C - 4
1ΝΟ / 1ΝC
Laching mashroom
150.16.020
ESF1C - 4 1ΝΟ / 1ΝC
COLOUR
Red
TYPE
POSITION
CODE
ESD1C - 2 - 21 1ΝΟ/1ΝC
0-1
150.20.040
1-0-2
150.20.050
ESD1C - 2 - 31 2ΝΟ
ΙΡ65
PUSH BUTTON
TYPE
SELECTOR HEAD SWITCH
ILLUMINATED PUSH BUTTON
CODE
TYPE
150.20.010
ESPF1C - 4 1ΝΟ / 1ΝC
Red
150.20.060
Green
150.20.070
Transpar.
150.20.080
Green
150.20.020
Transpar.
150.20.030
TYPE
CODE
EST1C - 4 1ΝΟ / 1ΝC
150.20.090
CODE
SIGNAL LAMP
TOGGLE HEAD SWITCH ΟΝ - OFF
48
COLOUR
 Lamps are not
included.
TYPE
COLOUR
CODE
EPS1C - 4
Red
150.20.100
EPS1C - 3
Green
150.20.110
EPS1C - 5
Yellow
150.20.120
Led lamps Φ22 and Φ16
Φ16
Φ22
LED LAMPS Φ22
ΡΒ - ΧΒ - 137
Length: 3 cm
VOLTAGE (V)
LED LAMPS Φ16
ΡΒ - ΧΒ - 137
Length: 3.2 cm
COLOUR
230V
AC
230V
DC
125V
DC
110V
AC / DC
48V
AC / DC
24V
AC / DC
12V
AC / DC
CODE
Red
162.10.010
Green
162.10.020
Yellow
162.10.030
White
162.10.040
Blue
162.10.050
Red
162.10.060
Green
162.10.070
Yellow
162.10.080
White
162.10.090
Red
162.10.100
Green
162.10.110
Yellow
162.10.120
Red
162.10.130
Green
162.10.140
Yellow
162.10.150
Red
162.10.160
Green
162.10.170
Yellow
162.10.180
Red
162.10.190
Green
162.10.200
Yellow
162.10.210
White
162.10.220
Red
162.10.230
Green
162.10.240
Yellow
162.10.250
VOLTAGE (V)
COLOUR
230V
AC
48V
AC / DC
24V
AC / DC
12V
AC / DC
CODE
Red
162.15.010
Green
162.15.020
Yellow
162.15.030
Red
162.15.040
Green
162.15.050
Yellow
162.15.060
Red
162.15.070
Green
162.15.080
Yellow
162.15.090
Red
162.15.100
Green
162.15.110
Yellow
162.15.120
Push buttons Φ16
TYPE
COLOUR
CODE
PUSH BUTTONS Φ16
Α1611SY SPDT
Red
162.18.010
Α1611SY SPDT
Green
162.18.020
Α1611SY SPDT
Yellow
162.18.030
0.5Α / 250V AC
1A / 30V DC
1ΝΟ/1ΝC
IP40
ILLUMINATED LACHING PUSH BUTTONS
Φ16 230V
(ΝΕΟΝ LAMP N17 FIX WITH RESISTOR)
AD16Y 11Z
Red
162.18.040
AD16Y 11Z
Green
162.18.050
AD16Y 11Z
Yellow
162.18.060
TYPE
COLOUR
CODE
ILLUMINATED PUSH BUTTONS
Φ16 230V
AD16Y 11S
Red
162.18.070
AD16Y 11S
Green
162.18.080
ILLUMINATED PUSH BUTTONS
Φ16 24V
(ΝΕΟΝ LAMP N17 FIX WITH RESISTOR)
Φ16
AD16Y 11S
Red
162.18.090
AD16Y 11S
Green
162.18.100
49
Bulbs neon, lament, led
Ε14
Ε10
B9aS
166.10.020 166.10.010 166.10.040
Ε10
Filament
NEON BULBS 230V
TYPE
COLOUR
E10
White
E14
White
B9aS
White
B9aS
Filament
LED bulbs
FILAMENT BULBS Ε10 AND B9aS
VOLT
(V)
CODE
mA
CODE
Ε10
CODE
B9aS
TYPE
COLOUR
CODE
E10
Red
166.15.010
E10
Green
166.15.020
E10
Yellow
166.15.030
B9aS
Red
166.15.040
B9aS
Green
166.15.050
169.12.050
B9aS
Yellow
166.15.060
169.12.060
B9aS
White
166.15.070
230
20
169.10.010
169.12.010
110
20
169.10.020
169.12.020
60
50
169.10.030
169.12.030
48
50
169.10.040
169.12.040
24
50
169.10.050
12
250
169.10.060
166.10.010
166.10.020
166.10.040
LED BULBS 230V
Multi colour indicator bulbs neon and lament, with cable
TYPE
Β1
Β2
DESCRIPTION
With nut,
without reflector
Pressed in type,
without reflector
CODE
230V
ΝΕΟΝ
CODE
24V
FILAMENT
CODE
12V
FILAMENT
Red
166.20.010
166.20.040
166.20.070
Green
166.20.020
166.20.050
166.20.080
Yellow
166.20.030
166.20.060
166.20.090
Red
166.20.100
166.20.130
166.20.160
Green
166.20.110
166.20.140
166.20.170
Yellow
166.20.120
166.20.150
166.20.180
COLOUR
B1 reflector
B1
B2 reflector
B2
ACCESSORIES
DESCRIPTION
CODE
Reflector for bulbs Β1 and Β2
166.20.190
Neon bulbs, with resistor and cable
TYPE
6012Η
Ν17
50
DESCRIPTION
CODE
230V ΝΕΟΝ
Neon bulbs
166.25.010
Neon bulbs with resistor
166.25.020
6012Η (166.25.010)
Relays soldier type, with heavy duty contacts
 Max. contact current: 10Α (JTX 2P)
5A (JTX 3P)
 Microrelay package: 10 pcs
 Microrelay base package: 20 pcs
JTX 2P
JTX 3P
PF 083AE
COIL
VOLTAGE
CODE
JTX (2Ρ)
CODE
JTX (3Ρ)
COIL
VOLTAGE
CODE
JTX (2Ρ)
CODE
JTX (3Ρ)
230V AC
175.10.010
175.14.010
230V DC
175.12.010
175.16.010
110V AC
175.10.020
175.14.020
110V DC
175.12.020
175.16.020
60V AC
175.10.030
175.14.030
60V DC
175.12.030
175.16.030
48V AC
175.10.040
175.14.040
48V DC
175.12.040
175.16.040
24V AC
175.10.050
175.14.050
24V DC
175.12.050
175.16.050
12V AC
175.10.060
175.14.060
12V DC
175.12.060
175.16.060
6V AC
175.10.070
175.14.070
6V DC
175.12.070
175.16.070
PF 113AE
MICRORELAY BASES
WITH COVERED CONTACTS
TYPE
DESCRIPTION
CODE
PF 083AE
Base soldier type,
2Ρ, nylon.
175.18.010
PF 113AE
Base soldier type,
3Ρ, nylon.
175.18.020
Relays with Led, Push button and Lock
 Heavy duty use
 10Α NO / 5A NC
 Microrelay soldier type package: 20 pcs
 Microrelay base type package: 50 pcs
70.2-1
70.3-3
MICRORELAYS SOLDIER TYPE AC
57.02
MICRORELAYS SOLDIER TYPE DC
COIL
VOLTAGE
CODE
2Ρ 8 PIN
70.2-1
CODE
3Ρ 11 PIN
70.3-3
COIL
VOLTAGE
CODE
2Ρ 8 PIN
70.2-1
CODE
3Ρ 11 PIN
70.3-3
230V AC
175.35.010
175.39.010
230V DC
175.37.010
175.41.010
110V AC
175.35.020
175.39.020
110V DC
175.37.020
175.41.020
60V AC
175.35.030
175.39.030
60V DC
175.37.030
48V AC
175.35.040
175.39.040
48V DC
24V AC
175.35.050
175.39.050
12V AC
175.35.060
175.39.060
6V AC
175.35.070
175.39.070
MICRORELAYS BASE TYPE AC
COIL
VOLTAGE
CODE
2Ρ
57.02
CODE
4Ρ
57.04
230V AC
175.45.010
175.47.010
175.41.030
110V AC
175.45.020
175.47.020
175.37.040
175.41.040
48V AC
175.45.030
175.47.030
24V DC
175.37.050
175.41.050
12V DC
175.37.060
175.41.060
24V AC
175.45.040
175.47.040
6V DC
175.37.070
175.41.070
12V AC
175.45.050
175.47.050
Relays base type
COIL
VOLTAGE
CODE
JQX-13F (2Ρ)
CODE
JQX-13F (4Ρ)
230V AC
175.25.010
175.27.010
110V AC
175.25.020
175.27.020
48V AC
175.25.030
175.27.030
24V AC
175.25.040
175.27.040
12V AC
175.25.050
175.27.050
6V AC
175.25.060
175.27.060
230V AC
175.29.010
175.31.010
24V AC
175.29.020
175.31.020
230V DC
175.29.030
175.31.030
110V DC
175.29.040
175.31.040
48V DC
175.29.050
175.31.050
TYPE
24V DC
175.29.060
175.31.060
PYF 08A
Rail base, for microrelays, 2Ρ
175.33.010
12V DC
175.29.070
175.31.070
PYF 14A
Rail base, for microrelays, 4Ρ
175.33.020
6V DC
175.29.080
175.31.080
S1A - 14
Microrelay base, soldier type, 4Ρ
175.33.030
JQX - 13F 2P
JQX - 13F 4P
PYF 08A PYF 14A
S1A - 14
 Max. contact current: 5Α (JQX-13F 2P)
3A (JQX-13F 4P)
 Microrelay package: 20 pcs
 Microrelay base package: 10 pcs
BASES FOR MICRORELAYS WITH COVERED CONTACTS
DESCRIPTION
CODE
51
Voltage and phase failure relays
 It monitors loss of one or more phases and is senses the
preselected voltage limits up or down
 Base: Socket type, 8 pin
 Attention! When the equipment is supplied, the contacts 1 and 2
are closed and the contacts 1 and 8 are open.
TYPE
DESCRIPTION
CODE
DRV1
One phase voltage and phase relay
180.10.040
DRV3
Three phase voltage and phase relay
180.10.030
DRV3 (180.10.030)
Phase failure relays, socket type (DRF) and rail type (DRF2)
 DRF2: Three phase failure relay without neutral
 DRF: Four functions in one unit which monitors: loss of one or more
phases, phase sequence, asymmetry between phases and loss
of neutral
 Base: DRF: socket type 8 pin / DRF2: rail type
 Attention! the equipment senses asymmetry, so when three phases
simultaneously fall down or go up, there is no reaction. In this case,
you must use electronic voltage sensing equipment DRV3.
TYPE
DRF
DRF - 2
DESCRIPTION
CODE
Phase failure relay, socket type
180.10.010
Three phase failure relay, rail type,
without neutral
180.10.020
DRF socket type
(180.10.010)
DRF - 2 rail type
(180.10.020)
Level controller for conductive liquids, socket type
 Automatic liquid level control, pump, dry running protection
 You must use two electrodes for metal pipes or containers and earth
point 5, three electrodes for plastic pipes as sensors.
 Electrodes can send signals in max. distance 2 klm
(cable diameter: 1.5 mm2)
 Earth connection is obligatory.
 Base: socket type, 8 pin
TYPE
DRS - 1
DESCRIPTION
ELΡ - Plastic (180.12.020)
ELΡ 1 - Plastic heavy duty
(180.12.030)
CODE
Level controller
180.10.050
ELT
Spark type electrodes for water
containers
180.12.010
ELP
Dipped in plastic electrodes
180.12.020
ELP - 1
Dipped in plastic electrodes,
heavy duty
180.12.030
DRS - 1
(180.10.050)
ELT - Spark type (180.12.010)
 Electrodes are not included.
Flow controllers for conductive liquids, socket type
 Electronic device with time delay 0 - 120 sec. that senses
conductive liquids.
 Electrodes can send signals in max. distance 2 klm
(cable diameter: 1.5 mm2)
 Earth connection is obligatory.
 Base: socket type, 8 pin
TYPE
FC - 1
ELT
52
DESCRIPTION
CODE
Flow controller
180.10.060
Spark type electrodes for water
containers
180.12.010
FC - 1
(180.10.060)
 Electrodes are not included.
Electronic two and three pump sequence controller
 Two pumps, socket type, 8 pin
- Electronic two pump sequence controller
- Possibility for the pumps to operate one at a time or both according to customer requirements.
 Three pumps (First start - First stop), rail type
- Electronic three pump sequence controller Pumps operate one after the other and circularly.
 Supply voltage: ................................................ 230V AC, +10% -15% (1.8VA) max
 Sensor voltage with open contact: ................... 12V DC
TYPE
DESCRIPTION
CODE
ΕΑ - 2
Two pump sequence controller
180.10.070
ΕΑ - 3
Three pump sequence controller
180.10.080
ΕΑ - 2
(180.10.070)
Water pump controller, schuko oultet, “Aqua Stop”




Electronic water pump controller protecting motors from useless operation in case of water lack.
For motors up to 1.5 ΗΡ.
Restart after 5 min. Auto restart.
Electrode is included and it must be mounted in metallic tube.
 Base: ......................................
 Supply voltage: .......................
 Output relay: ...........................
 Supply tolerance: ...................
 Time delay: .............................
 Power consumption: ...............
 Dimensions / Weight: .............
schuko outlet
230, 240, 415V AC, 50/60 HZ
20 Α
+15% -30%
3 min
1.32 VA
98 x 52 x 78 mm / 290 gr
TYPE
DESCRIPTION
CODE
PC - 1
Water pump controller
180.10.090
PC - 1 (180.10.090)
Timers C-MOS suitable for star delta
 Timers C-MOS of high accuracy, repetition fault ± 0.1%.
 They can be continuously supplied.
 Base: ..............................
 Supply voltage: ...............
 Output relay: ...................
 Supply tolerance: ............
 Power consumption: .......
 Reset time: .....................
 Dimensions: ...................
 Weight: ..........................
CMTR: din rail type / CMTO: octal, socket type, 8 pin
12, 24, 48, 110, 230, 240V
10Α one changeover
+15% -30%
4 VA
50 ms
74 x 33 x 92 mm (CMTO) / 60 x 44 x 70 mm (CMTR)
100 gr (CMTO) / 110 gr (CMTR)
VOLTAGE (V)
TIME
CODE CMTR1
CODE CMTO1
230 - 240
15 sec
180.15.010
180.15.090
230 - 240
60 sec
180.15.020
180.15.100
230 - 240
8 min
180.15.030
180.15.110
230 - 240
60 min
180.15.040
180.15.120
24
15 sec
180.15.050
180.15.130
24
60 sec
180.15.060
180.15.140
24
8 min
180.15.070
180.15.150
24
60 min
180.15.080
180.15.160
CMTO octal
CMTR rail type
53

Uninterruptible Power Supply (UPS)

Transcription

Similar documents

EXHIBIT A Historical Enplanements, 2004

Dateien anzeigen - Heinrich-Heine