August Hot Tools - WendellPeters.com
Transcription
August Hot Tools - WendellPeters.com
HOT TOOLS THE PRODUCTS, IDEAS AND DEALS YOU NEED TO BE YOUR BEST. THE JACKS OF ALL TRADES THE 2-TON FJ200 AND 3-TON FJ300 FLOOR JACKS HAVE YOU COVERED. SEE WHAT WE HAVE UP OUR SLEEVES ON PAGE 2. New Products Page 4 Shop & Tech Page 10 AUG '16 HOT TOOLS // FEATURED PRODUCTS WHATEVER YOU NEED TO LIFT, YOU'VE JUST HIT THE JACKPOT. NOW THERE’S A BETTER FLOOR JACK FOR WHATEVER TYPE OF VEHICLES YOU’RE DEALT. 2-TON Our FJ200 is just the thing for cars, small pickups, SUVs — anything up to 2 tons. It’s not only a breeze to operate, it lifts faster and higher than other jacks. C A PA C I T Y FLOOR JACK Our FJ300 is the answer for vehicles like heavy-duty trucks, commercial vehicles and more. It also lifts higher than the competition. 3-TON C A PA C I T Y FLOOR JACK 2 www.snapon.com AUG 2016 // FEATURED PRODUCTS HOT TOOLS // FEATURED PRODUCTS WHICH IS RIGHT FOR YOUR SHOP? SPEED SPECIFICATION FJ200FJ300 Capacity (lbs) 4,000 6,000 Low Height (in) 3.5 3.8 Max Lifting Height (in) 23.0 23.4 5.2 x 5.2 5.2 x 5.2 Ground Clearance 0.55 0.56 Chassis Length (in) 31.5 31.5 Overall Width at Front wheels (in) 11.25 11.25 Overall Width at Rear Casters (in) 14.5 14.8 Handle Length (in) 47.3 47.3 Saddle raise, one pump, no load (in) 10.8 9.3 Pump strokes to reach max lifting height, no load 3.5 4.5 Saddle size (in) Both feature dual-pump action to reach service height quickly. As well as a one-piece handle with a unique spring-loaded retention pin for fast “slam-and-go” operation. EASE Their contoured, low-profile lift arm easily fits under vehicles and can be lifted higher than the competition. Crowned wheels allow for easier maneuvering, while a front wheel yoke, arm grease fittings and advanced retention system are stronger and easier to maintain. QUALITY Hydraulic Oil Snap-on HP Snap-on HP Weight (lbs) 101.0 113.0 ® ® To find out more about this unbeatable pair of jacks, talk to your Snap-on® Franchisee or other sales representative, today. Scan code to see Floor Jack product video. 2-Ton Floor Jack FJ200 Built to go all day, both jacks feature additional features like locknuts instead of snap rings to secure their front wheels, special high-performance hydraulic oil and longer lasting seals that handle more pressure. AUG 2016 // FEATURED PRODUCTS $599.95 3-Ton Floor Jack FJ300 www.snapon.com $699.95 3 NEW PRODUCTS // INNOVATION SHOWCASE PRODUCTS INNOVATED TO MAKE YOU FASTER, SMARTER AND MORE PRODUCTIVE. 1 lb Non-Marring Mallet (Blue-Point®) 6 lb Brass Hammer with Super Grip (Blue-Point®) •D urable, resin-rich “pull-truded” fiberglass handle • Brass deforms upon impact leaving no dents on items being struck •H andle is UV and chemical resistant • L ess rebound than traditional rubber head mallets helps to reduce operator fatigue BFNM1 • Durable, resin-rich, “pull-truded” fiberglass handle is UV and chemical resistant $38.80 • Meets specifications for non-sparking tools in gas, oil, paint and chemical environments • Super Grip handle style is well matched for use with gloves—indoor or outdoors HBR6 $218.35 Fuel Rail Plug •U sed to block off fuel injector line ports on the fuel rail to test fuel injectors •M anufactured from special alloy steel • P recision machined and heat treated for optimum strength and durability CJ158 $26.95 SPEAK FLUENT CAR Scan code for specific vehicle coverage. WITH EUROPEAN COVERAGE. The Bloody Starter Automatisches Getriebe Tändstift Understanding European cars is hard enough. The last thing you need is any sort of flak between you and your diagnostic tool. Which is why Snap-on has more than tripled their coverage to give you the strongest support in the market. With true OEM-specific coverage on Alfa Romeo, Audi, BMW, FIAT, Jaguar, Land Rover, Mercedes, MINI, Porsche, Smart, Volvo and VW —you’ll never have to settle for an inferior tool. Get true Snap-on reliability, support and all the coverage you need, right here. Expanded European coverage is now available for select VERUS, VERDICT, MODIS, SOLUS™ and ETHOS family platforms. ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® To learn more, ask your Snap-on Franchisee, other sales representative or visit diagnostics.snapon.com/euro ® 4 ® www.snapon.com All trademarks are marks of their respective holders. AUG 2016 // NEW PRODUCTS LIMITED TIME DEALS // DON’T WAIT GRIND OUT A DEAL. SAVE WHEN YOU PURCHASE ANY OF THESE TOOLS.* 3" Cut-Off Tool Mini Die Grinders • V ariable-speed paddle-style safety trigger prevents accidental start-ups • Five-vane air motor for increased power • Black Alcryn® grips with red Snap-on® logo for improved comfort and resistance to automotive fluids • High-quality single-row bearings allow for smooth operation and minimal runout to keep the tool running longer • Chrome plated steel clamp nuts for improved durability • 1 0-position power/speed regulator precisely matches tool speed to job requirements • T hermally balanced air motor acts as internal cooling system to protect moving parts and efficiently routes air to control surface temperature of tool PT250A $279.95 SALE $251.95 • 10-position speed regulator precisely matches the speed to the job, giving the user unmatched control Mini Die Grinder 6 pk Cutter Wheels (Blue-Point®) Right Angle Mini Die Grinder PT100A $214.95 SALE $193.50 • 3 " diameter x 1/16" thick with 3/8" arbor hole PT110A $289.95 SALE $260.95 • 3 6-grit • Maximum rated RPM: 25,000 AT150-20A $27.25 SALE $24.50 Mini Die Grinders (Blue-Point®) • Intended for most standard deburring operations 8 pc Carbide Burr Set • Safety lever throttle • Generally used for ferrous metals • Clean dies, rotors, backing plates and brake pad mounts • Set includes 1/4" Shank VWB1C, VWB2B, VWB3B, VWB4B, VWB5B, VWB6B, VWB7B and VWB8B in a metal index VWB800D $322.95 SALE $290.65 • Removes gasket material, grinds valve seats, dresses welds and enlarges holes Standard Die Grinder (Blue-Point®) 90° Angle Mini Die Grinder (Blue-Point®) AT115 $130.95 SALE $117.85 4 pc Long Reach Carbide Burr Set AT118 $167.95 SALE $151.15 •U se for surface conditioning of non-ferrous materials like magnesium, soft steel and hard plastic plus porting of aluminum engine parts 3" Reversible Cut Off Tool (Blue-Point®) • Set contains VWBL401–VWBL404 in kit bag • Built-in speed regulator for fine tuning VWBL400 $239.95 SALE $215.95 • Extended reach for hard to access areas • Spark direction control AT157R $179.95 SALE $161.95 *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. Offer cannot be combined with another trade-in or discount. AUG 2016 // RAD07C www.snapon.com 5 LIMITED TIME DEALS // UP NEXT GET UP TO $50 WHEN YOU TRADE UP TO EITHER OF THESE 18 V CORDLESS TOOLS.* 18 V MonsterLithium Hammer Drill Kit 1/2" Drive 18 V MonsterLithium Impact Wrench Kit • 1/2" single sleeve steel chuck with carbide jaws • 600 ft-lb of torque output breaks stubborn fasteners loose easily • Heavy duty gearing designed for metal drilling • Digital microprocessor controlled switch, maximizes performance, run time and durability • Digital microprocessor-controlled variable speed switch maximizes performance, run time and durability • Built in brake stops anvil and prevents tool from throwing fasteners and sockets • 22-position clutch with two-speed gearbox provides torque control for the correct application • Integrated Battery Management, prevents battery drain and prolongs tool life • Super bright 1 watt LED illuminates work area • Includes (2) 18 V MonsterLithium 4.0 Ah batteries and charger with a tote bag • Rare earth magnet motor provides more torque output, less battery drain • Includes (2) 18 V MonsterLithium 4.0 Ah batteries and charger with a tote bag CDR8850H CT8850 $789.95 $691.95 18 V Slide-on MonsterLithium Ion Battery • 18 V 4.0 Ah high capacity lithium battery (72 Wh) • Fast 55-minute charge time and 33% more run time than the CTB7185 3.0 Ah battery • No self-discharge and no memory effect • Four LED fuel gauge indicates battery and charger condition • Operates on current CTC720 and CTC728 chargers CTB8185 $182.95 *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. Trade amount is up to $50, and may be less based on condition of trade. Offer cannot be combined with another trade-in or discount. 6 www.snapon.com AUG 2016 // RAD22C LIMITED TIME DEALS // COMING SOON STRIKE A BARGAIN. SAVE ON THESE SELECT PRYBAR SETS.* 4 pc Striking Prybar Set 36" Striking Prybar • Flared end of handle offers protection from off-center handle strikes • Blade features a precision-ground edge, with angled design for maximum leverage while lifting and pulling on bar • Blade extends through the handle and contacts the metal endcap to provide a continuous, solid, striking force • Blade extends through the handle and contacts the metal endcap to provide a continuous, solid, striking force • Includes SPBS8A, SPBS12A, SPBS18A and SPBS24A (8, 12, 18 and 24") • Flared end of handle offers protection from off-center handle strikes SPBS704AG $218.95 SALE $196.95 SPBS36AG $141.95 SALE $127.75 SPBS704AO $218.95 SALE $196.95 SPBS36AO $141.95 SALE $127.75 SPBS704AR $218.95 SALE $196.95 SPBS36AR $141.95 SALE $127.75 4 pc Prybar Set • Rolling head acts as fulcrum and provides leverage • Pointed end is useful in many aligning applications • Includes 6, 12, 16 and 20" prybars PBS704 $273.35 SALE $245.95 3 pc Straight Tip Prybar Set • Flared end of handle offers protection from off-center handle strikes • Blade extends through handle and makes contact with endcap to provide a solid striking force • Includes MPBS12A, MPBS24A and MPBS36A (12, 24 and 36-5/8") MPBS703A $251.75 SALE $226.50 *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. Offer cannot be combined with another trade-in or discount. AUG 2016 // RAD09C www.snapon.com 7 LIMITED TIME DEALS // SIGN UP EARLY GET UP TO $50 DOWN PAYMENT MATCH ON THESE SELECT TOOLS.* 17 pc 3/8" Drive 6-Point Metric Starter Set •H igh-strength sealed-head ratchet built for strength, precision and durability • S ockets feature Flank Drive® wrenching system, which grips the fastener on the flanks/flats, increasing torque by 15–20% •N ickel chrome plating provides a wear-resistant finish along with a mirror-like finish • S tronger alloy steel allows extensions to be turned to a smaller diameter for greater accessibility STARTERSET3 $570.00 14.4 V 3/8" Drive MicroLithium Cordless Ratchet Kit • 4 0 ft-lb torque output to remove stubborn fasteners • E asily withstands 158 ft-lb of manual torque • 2 75 RPM for fast removal and installation of fasteners •D igital variable speed trigger for precise control •B uilt-in brake prevents the tool from throwing sockets and fasteners CTR761B $439.95 85 pc 3/8" Drive General Service Set (Blue-Point®) • ( 13) SAE (1/4–1") and (14) metric (6–19 mm) standard sockets • ( 13) SAE (1/4–1") and (14) metric (6–19 mm) deep sockets • ( 11) External TORX® sockets (E4–E20) • (2) PHILLIPS® socket drivers (#3 and #4) • (2) Pozidriv® socket drivers (#3 and #4) • (8) Tamper-resistant TORX® socket drivers (T10–T45) • ( 2) Spark plug sockets (5/8 and 13/16") • ( 6) Ratchet/socket accessories BLPGSS3885 $323.35 *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. You must purchase STARTERSET3, CTR761B or BLPGSS3885 to take advantage of this offer. Offer cannot be combined with another trade-in or discount. 8 www.snapon.com AUG 2016 // RAD33C LIMITED TIME DEALS // DON’T MISS PULL NO PUNCHES. SAVE ON ANY OF THESE SELECT PULLER SETS.** Master Interchangeable Puller Set Bolt Grip Puller Set • Includes all components for the CJ2001, CJ2002, CJ2003A, CJ2004 and CJ2005 puller sets • Services steering wheels, flywheels, pulleys and gears with tapped holes CJ2000A $3,295.00 22.60 $ * PER WEEK • 208 WEEKS EC TERMS Tool Control Board Wall Cabinet VE200A $183.75 SALE $165.50 KRA276D $850.00 SALE $764.95 • Includes a four-position two- and three-way yoke, three different pressure screw tips and an assortment of SAE and metric bolts • Approximate spread to bolt is 1-1/4—3-13/16" CJ2001P $257.95 SALE $231.95 Puller Set, Interchangeable • Use on bearings, bearing races, gears, bushing retainers, etc. • Builds any of 12 different pullers • Two- and three-jaw capability with three sets of jaws • Pulling capacity: (short jaws) 4-1/2 ton, (medium jaws) 6-1/2 ton, (large jaws) 8 ton CJ2004 $1,210.00 17.85 $ * PER WEEK • 78 WEEKS EC TERMS Image displays CJ2000A, VE200A and KRA276D Gear Puller Set • Use on Pitman® arms, timing gears, carrier side bearings and more Bearing Separators • Combine to create 10 different pullers • For separating and pulling double bearings and close fitting gears • Capacity from 6–10 tons depending on yoke and jaws used • Use with tapped hole, two-jaw pullers or floor presses 2-3/8" Bearing Separator CJ950 $108.95 SALE $97.95 4-1/2" Bearing Separator CJ951 $235.95 SALE $212.50 CJ2002 $619.00 SALE $556.95 Rear Axle Puller Set • Slide hammer power pulls many flange type rear axles as well as axle bearings CJ2003A $615.00 SALE $553.50 *Extended Credit (EC) payment example is based on: the purchase price with the stated number of payments to be made, and example time price differential charge of 18.9%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. PPSAC costs extra. See important credit notice on back cover for additional terms and conditions. **Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. Offer cannot be combined with another trade-in or discount. AUG 2016 // RAD35C www.snapon.com 9 PRODUCTIVITY SHOWCASE // THE RIGHT TOOLS, RIGHT NOW GET THE LOWDOWN. SAVE ON OUR BEST-SELLING CREEPERS TODAY.* Premium Creeper •N ew and improved molding process provides stronger caster retention and increased durability • New caster profile reduces rolling resistance and increases maneuverability • Improved ground clearance reduces dragging over obstacles • Integrated storage trays and handles for added convenience • Chemical-resistant polyethylene body withstands the toughest shop conditions • 38" L x 17" W x 4.75" H JCW45ABL $214.95 SALE $193.50 Standard Creeper •N ew flat-oval tubing eliminates sharp corners and provides increased comfort •N ew caster profile reduces rolling resistance and delivers increased maneuverability • Solid plywood core for strength and durability • F ully padded with high-density 80 lb foam, 1-3/4" thick back and 2-3/4" thick headrest JCW62O $204.95 SALE $184.50 • Heavy-duty vinyl cover • 40" L x 17" W x 4" H JCW62BL $204.95 SALE $184.50 10 JCW62G $204.95 SALE $184.50 www.snapon.com AUG 2016 // STRA7 SHOP SOLUTIONS // STRAIGHT FROM THE BAY Kenny & Billy’s Automotive Center in Iselin, New Jersey is the local go-to shop for wheel service. When his Snap-on® Franchisee, Larry, showed co-owner Kenny Wenzel the new TPMS3, Kenny was intrigued. After doing his own research, Kenny concluded the Snap-on® product had the best vehicle coverage, so he bought it right off the truck. “For any wheel balance, alignment or rotation, it’s an essential tool that no shop should be without,” he says. “It even lets you reprogram sensors when you rotate a customer’s tires so the sensor knows where it is on the vehicle.” “It’s simple to use, cost-effective and easy to update. It’s an essential tool that no shop should be without.” “With the annual software subscription, we just plug it into the computer to get our updates. It couldn’t be easier to use—it gives you all the information you need and walks you through all the steps. It does even more than we hoped for,” says Kenny. “But one of the best things is knowing that our Snap-on guy will be here every week in case we have any problems.” Keep your shop up to date. Ask your Snap-on® Franchisee or other sales representative for a demonstration today. Kenny Wenzel, co-owner Kenny & Billy's Automotive Center THE SMARTEST TOOL IN A WORLD OF SMART TIRES. Tire Pressure Sensor System Tool Kit • T est TPM Sensors: Diagnose sensors and determine whether or not a replacement is needed • A lso captures sensor data and displays PSI, ID, temperature and battery status • S ensor Replacements: Features vehicle-specific prompts that guide the TPM system relearn following sensor replacement •R elearn TPM Vehicle Systems: Provides vehicle-specific reset procedures when vehicle tires have been rotated • T ire Rotations: Provides quick registration of new sensor locations after tire rotation TPMS3 $1,795.00 20.80 $ * PER WEEK • 104 WEEKS EC TERMS Programmable Sensor Add-on Package •U se the TPMS3 to program aftermarket tire pressure sensors •K it consists of a 2GB Micro SD card along with registration certificate •R egistration certificate contains a code that is entered into webTPM and allows access to sensor programming functionality TPMS3PRG $185.00 AUG 2016 // SHOP SOLUTIONS www.snapon.com *Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated next to the payment example with the stated number of payments to be made, and example time price differential charge of 18.9%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. PPSA costs extra. See important credit notice on back cover for additional terms and conditions. 11 TOOL STORAGE // MASTERS SERIES NEW MASTERS SERIES ROLL CAB WITH THREE EXTRA-WIDE DRAWERS. WE WENT TO GREAT LENGTHS. YOU'LL BE GLAD WE DID. 15-Drawer Masters Series Triple Bank Roll Cab • T hree extra-wide drawers for larger and longer tools • 5 4" W x 29" D with 38,916 cu in / 9,993 sq in of storage space • 6,800 lb load capacity er New 4" Deep Extra-Wide Draw KTL7023PJJ $10,800.00 48.25 $ * PER WEEK • 260 WEEKS With $2,700.00 down payment or trade-in EC TERMS *Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated next to the payment example with the stated number of payments to be made, and example time price differential charge of 18.9%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. PPSA costs extra. See important credit notice below for additional terms and conditions. **Flat Black Roll Cab comes with Black trim. Red PBO Gloss Black PC Royal Blue PCM Extreme Green PJJ Electric Orange PJK Flat Black** POT Add suffix to base stock number to choose color. INSTANT REBATES UP TO $3,000* WHEN YOU PURCHASE WITH AN EC CONTRACT. POUR ON THE SAVINGS HOW IT WORKS For a limited time, get up to $3,000 in instant rebates on all qualified sales, including diagnostics and tool storage. Remember—the more you buy, the more you may save. A net sale of $3,000 or more is eligible for rebates from $300 to $3,000. That’s how we’re making it rain. See the rebate tier structure chart for details. EC CONTRACTS ARE SUBJECT TO FINANCE CHARGES AND ANY APPLICABLE PPSA FILING FEES. *To qualify for Instant Rebate, customer must purchase approved product with an Extended Credit Sale (EC) contract with a net sale of $3,000 or more, and the contract must be accepted and purchased by Snap-on Credit before August 26, 2016. Only one rebate per EC contract. Only available with participating Snap-on® Franchisees or other sales representatives. See important credit notice below for more information. **Net Sale is equal to unpaid balance of the new purchase before the rebate is applied. To earn a specific rebate, the Net Sale must reach the tier minimum. Contracts must be dated and purchased before August 26, 2016. Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. ©Snap-on Incorporated 2016. R E B AT E S U P TO $ 3 , 0 0 0 NET SALE WITH EC** EC REBATE ON ALL PRODUCTS EC REBATE WITH FEATURED PRODUCTS $3,000 $6,000 $9,000 $12,000 $15,000 $20,000 $300 $600 $900 $1,200 $1,500 $2,000 $450 $900 $1,350 $1,800 $2,250 $3,000 While every attempt is made to ensure accuracy, errors during publication can occur. Product features and specifications can change. Pricing can change. Limited quantities. Participating Representatives only. All offers expire August 31, 2016. Offers cannot be combined with any other trade-in or discount. Snap-on and Blue-Point are trade marks, registered in the United States and other countries, of Snap-on Incorporated. ©Snap-on Incorporated 2016. All rights reserved. All other marks are trade marks of their respective holders. Important Credit Notice: Please be aware that the weekly payment is an estimate only and may not apply to you. Your actual payment may be different than the estimated financing payment shown. All credit sale contracts are subject to approved credit and the terms of the standard Snap-on Credit credit sales contract form. Not all applicants will qualify. Taxes, installation, and costs of financing, such as charges for filing PPSA statements, are extra. Finance charges begin accruing at contract inception. Weekly payments shown are based on suggested list prices and your price may vary. Terms and finance charge rates may vary, and such terms are subject to change without notice. In the event you fail to make payments when due, the terms of the contract will apply and late charges may be due. Please contact us regarding finance terms and restrictions. HTAUG16CNE Printed In U.S.A. Talk to us and others www.facebook.com/SnaponTools